Enitial
Shaun Grainger
Four Ashes Wolverhampton www.enitial.co.uk
Tel: +44 (0)7557 036753 Fax: +44 (0)1902 798798 s.grainger@enitial.co.uk
Thursday, 05 December 2013
New project Solar pumping project
Parameter Location:
United Kingdom, Poole (50° North; 2° West)
Required daily output:
25 m³; Sizing for average month
Dirt loss:
5.0 %
Water temperature:
20 °C
Products
Total dynamic head:
20 m
Motor cable:
25 m
Pipeline:
-
Quantity Details
PS600 HR-10-1
1 pc. Submersible pump system including controller, motor and pump end
Virtus 2
4 pc. 1,000 Wp; 2 x 2 modules; 37 ° tilted
Motor cable
25 m 4 mm² 3-phase cable
Accessories
1 set Well Probe, Float Switch, Pressure Switch
Daily output in average month Daily values
19 m³
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
Av.
1.5
2.4
3.5
4.7
5.2
5.1
5.1
4.7
3.8
2.6
1.6
1.1
3.4
6:00
7:00
8:00
9:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
0.035
0.10
0.20
0.30
0.39
0.46
0.48
0.46
0.39
0.30
0.19
0.097
0.034
Output [m³]
Energy [kWh]
Hourly values
Output [m³/h]
Energy [kWh]
1/2
Created by LORENTZ COMPASS 3.0.10.58 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Enitial
Shaun Grainger
Four Ashes Wolverhampton www.enitial.co.uk
Tel: +44 (0)7557 036753 Fax: +44 (0)1902 798798 s.grainger@enitial.co.uk
Thursday, 05 December 2013
New project Solar pumping project
Wiring diagram
2/2
Created by LORENTZ COMPASS 3.0.10.58 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
PS600 HR-10 Solar Submersible Pump System for 4" wells System Overview Head Flow rate
max. 80 m max. 2.0 m³/h
Technical Data Controller PS600 ƒ Control inputs for dry running protection, remote control etc. ƒ Protected against reverse polarity, overload and overtemperature ƒ Integrated MPPT (Maximum Power Point Tracking) ƒ Battery operation: Integrated low voltage disconnect Power Input voltage Optimum Vmp* Nominal voltage (battery operation) Motor current Efficiency Ambient temp. Enclosure class
max. 0.70 kW max. 150 V > 68 V 48 V max. 13 A max. 98 % -30...50 °C IP54
Motor ECDRIVE 600-HR ƒ Maintenance-free brushless DC motor ƒ Water filled ƒ Premium materials, stainless steel: AISI 304/316 ƒ No electronics in the motor Rated power Efficiency Motor speed Insulation class Enclosure class Submersion
0.70 kW max. 92 % 900...3,300 rpm F IP68 max. 250 m
Pump End PE HR-10** ƒ Non-return valve ƒ Premium materials, stainless steel: AISI 304/316
Pump Unit PU HR-10 (Motor, Pump End) Borehole diameter Water temperature
min. 4,0 in max. 50 °C
Standards 2006/42/EC, 2004/108/EC, 2006/95/EC
IEC/EN 61702:1995, IEC/EN 62253 Ed.1 The logos shown reflect the approvals that have been granted for this product family. Products are ordered and supplied with the approvals specific to the market requirements. *Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature **Specify temperature range on order
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de Created by LORENTZ COMPASS 3.0.10.58 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
PS600 HR-10 Solar Submersible Pump System for 4" wells Pump Chart
Vmp* > 68 V
Dimensions and Weights Controller H= H2 = W1 = W2 = W3 = D= D1 =
396 mm 364 mm 178 mm 156 mm 116 mm 165 mm 150 mm
Pump Unit** A= B= C= D= E= S=
771 mm 185 mm 586 mm 96 mm 147 mm 1.25 in
Net weight Controller
4.5 kg
Pump Unit
12 kg
Motor
7.0 kg
Pump End
4.5 kg
*Vmp: MPP-voltage under Standard Test Conditions (STC): 1000 W/m² solar iradiance, 25 °C cell temperature **By cutting the rubber spacers the diameter can be adjusted between 6" and 4" wells. BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de Created by LORENTZ COMPASS 3.0.10.58 All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.Pictures may differ from actual products depending on local market requirements and regulations.
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the well dropped below the level of the well probe, the LORENTZ Controller will stop the pump and indicates Source Low LED.
FEATURES • • • • •
Reliable dry run protection Simple to install Trouble free operation Corrosion-free Splicing kit included
TECHNICAL DATA • • • • •
Max. operating temperature 55 °C Enclosure class: IP68 Submersion depth: max 50 m Cable length: 1.5m Wire size: 2x 0.75mm² or AWG 19, waterproofed Mounted in vertical position
STANDARDS •
Meets the requirements for CE
DIMENSION/WEIGHT •
V130613
•
Packaging dimensions: 260 x 170 x 40 mm 10.3in x 6.7in x 1.6in Total weight: 0.1kg / 0.2lbs
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations.
Float Switch Mechanically Activated Device for Water Level Detection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a tank. When the water level in the tank reaches the maximum, the LORENTZ Controller will stop the pump and indicates Tank Full LED.
FEATURES • • • • • •
Reliable water level detection Simple to install Trouble free operation Not sensitive to rotation Corrosion-free Three wires for normally open and normally closed application
TECHNICAL DATA • • • • •
Operating temperature: -10°C to 55°C Storage temperature: : -10°C to 55°C Enclosure class: IP68 Cable length: 3m, waterproof Wire size: 3x 1.0mm² or AWG 18
STANDARDS •
Meets the requirements for CE
DIMENSION/WEIGHT •
V130613
•
Packaging dimensions: 230 x 160 x 55 mm 9.1in x 6.3in x 2.2in Total weight: 0.8kg / 1.8lbs
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations.
Pressure Switch Device for Water Pressure Detection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a tank. When the water level in the tank reaches the maximum, the pressure will increase and the LORENTZ Controller will stop the pump and indicates Tank Full LED.
FEATURES • • • •
Reliable water pressure detection Simple to install Trouble free operation Corrosion-free
TECHNICAL DATA •
Pressure range between 1 and 5 bar
Connections • •
2x cable gland Ø 5-9mm G ¼’’ pipe thread
STANDARDS •
Meets the requirements for CE
DIMENSION/WEIGHT •
V130613
•
Packaging dimensions: 130 x 105 x 65 mm 5.1in x 4.2in x 2.6in Total weight: 0.45kg / 1lbs
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel +49 (0)4193 7548-0, Fax -29, www.lorentz.de
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may differ from actual products depending on local market requirements and regulations.