CLARITY LINE It’s what’s on the inside that counts. With the RSD Clarity line, your engines inner workings are on display. Designed and cut with the form of the true working components in mind, the Clarity line adds that extra level of detail, showing off what is usually hidden.
FEATURES FOR AIR CLEANER, DERBY COVER & CAM COVER • Allows for viewing of internal engine components • CNC machined from billet aluminum & polycarbonate • Speciality coating does not allow oil and grease to adhere • Proprietary abrasion and UV resistant film to protect surface from yellowing, marring or breakage • All mounting hardware included
CLARITY AIR CLEANER
RSD CLARITY AIR CLEANER Ever wanted to know what your air intake is doing? Now you can check it out while it’s sealed tightly behind transparent polycarbonate and machined billet aluminum. The RSD Clarity Air Cleaner exposes your fuel delivery system as no other intake system can. • Best in filtration and flow, K&N Air Filter included
• Backing plate promotes smooth airflow into the carb/throttle body
RSD CLARITY DERBY COVER The RSD Clarity Derby Cover is the next best thing to an open primary. Articulately machined billet aluminum frames transparent polycarbonate, giving you the same feel of a spinning clutch pack, yet is fully enclosed. Now you can show off that trick clutch. • Direct replacement for your derby cover on your OEM primary
• All mounting hardware & Gasket included
FITMENT
FINISH
PART #
1993 and up TWIN CAM & EVO
BLACK OPS
0206-2059-SMB 0206-2059-BM
1993 and up TWIN CAM & EVO
CONTRAST CUT
1993 and up TWIN CAM & EVO
CHROME
1994 and up XL SPORTSTER
BLACK OPS
0206-2061-SMB 0206-2061-BM
0206-2059-CH
1994 and up XL SPORTSTER
CONTRAST CUT
1994 and up XL SPORTSTER
CHROME
0206-2061-CH
2008 and up FL, FLHT
BLACK OPS
0206-2060-SMB 0206-2060-BM
2008 and up FL, FLHT
CONTRAST CUT
2008 and up FL, FLHT
CHROME
0206-2060-CH
93-2006 BIG TWIN W/S&S E/G CARB
BLACK OPS
0206-2062-SMB
93-2006 BIG TWIN W/S&S E/G CARB
CONTRAST CUT
0206-2062-BM
93-2006 BIG TWIN W/S&S E/G CARB
CHROME
0206-2062-CH
CLARITY DERBY COVER FITMENT
FINISH
PART #
1999 and up TWIN CAM (5 HOLE)
BLACK OPS
1999 and up TWIN CAM (5 HOLE)
CONTRAST CUT
0177-2007-BM
1999 and up TWIN CAM (5 HOLE)
CHROME
0177-2007-CH
0177-2007-SMB
0177-2006-SMB
1970-1998 BIG TWIN (3 HOLE)
BLACK OPS
1970-1998 BIG TWIN (3 HOLE)
CONTRAST CUT
0177-2006-BM
1970-1998 BIG TWIN (3 HOLE)
CHROME
0177-2006-CH
CLARITY CAM COVER
RSD CLARITY CAM COVER
FL Application specific
FITMENT
FINISH
PART #
2001 and up TWIN CAM 88 & 96CI
BLACK OPS
0177-2003-SMB
2001 and up TWIN CAM 88 & 96CI
CONTRAST CUT
0177-2003-BM
2001 and up TWIN CAM 88 & 96CI
CHROME
0177-2003-CH
We’ve set out to expose the heart of the twin cam engine with the RSD Clarity Timing Cover. It’s finely machined billet housing and transparent polycarbonate lenses show you a view of the cam gears, chain and support plate, exposing the inner workings.
2001 and up FL TOURING
BLACK OPS
0177-2005-SMB
2001 and up FL TOURING
CONTRAST CUT
0177-2005-BM
• Direct replacement for your stock Timing/Cam cover.
2001 and up FL TOURING
CHROME
0177-2005-CH
• All mounting hardware & Gasket included
*FL TOURING APPLICATIONS ALLOW FOR MANDATORY 5/16” AIR GAP BETWEEN POLYCARBONATE AND EXHAUST SYSTEM
564
AIR INTAKE SYSTEMS When RSD set out to create an air cleaner, we wanted to make something that improved performance as well as the look of a bike. We ended up revolutionizing what an air cleaner can be in both function and aesthetics.
TURBINE AIR CLEANER The new RSD Turbine Air cleaner took some major design cues from jet engines. This is the next step in intake systems for your bike. We focused our efforts on building something that would flow well while also giving a unique and timeless style that looks good on any bike. FEATURES • Best in filtration and flow from K&N • High-volume K&N Air Filter included • Hidden internal crank case breathers • Revolutionary backing plate
• Slotted breather bolts and oil tubes are included with Big Twin applications * Not legal for sales or use on pollution controlled vehicles * All air cleaners can be used on Mikuni carbs with use of adapter – part number HS42/001-K (sold separately)
TURBINE AIR CLEANER B
BO
CC
CH
1991 and up XL SPORTSTER
FITMENT
0206-2039-B
0206-2039-SMB
0206-2039-BM
0206-2039-CH
1993 and up TWIN CAM & EVO
0206-2037-B
0206-2037-SMB
0206-2037-BM
0206-2037-CH
2008 and up FL,FLHT
0206-2038-B
0206-2038-SMB
0206-2038-BM
0206-2038-CH
0206-2040-SMB
0206-2040-BM
0206-2040-CH
1993-2006 BIG TWIN W/S&S E/G CARB
0206-2040-B
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
565
VENTURI AIR CLEANER The Venturi Air Cleaner features the best in filtration and flow from industry leader K&N. It is a proven high performance bolt-on part that drastically improves the looks and performance of your machine. Our revolutionary backing plate promotes smooth air flow into the carb/throttle body while also providing hidden internal crank case breathers and our tight seal oil separator insures a clean, leak free ride. Manufactured from Billet Aluminum in the USA, the Venturi is a jewel for the side of your bike. FEATURES • Distinct exposed filter design • Design matched to RSD wheels • Built-in crank case breathers • High-volume K&N Air Filter included • Stainless steel wire mesh screen
• Slotted breather bolts and oil tubes are included with Big Twin applications. *Not legal for sales or use on pollution controlled vehicles *All air cleaners can be used on Mikuni carbs with use of adapter – part number HS42/001-K (sold separately)
REVOLUTIONARY BACKING PLATE FEATURED ON ALL VENTURI, CLARITY & TURBINE AIR CLEANERS BUILT-IN CRANKCASE BREATHERS
OIL TUBES
All RSD aircleaners feature a high-volume K&N air filter, the best inn filtration ltr trat atio ioon an aand ndd flow. ow
VENTURI CHAMFER
SLAM
SLAM
JUDGE
JUDGE
SPEED 5
SPEED 5
BOSS
RONIN
SPEED 7 (DIESEL DESIGN MATCH)
566
BOSS
DOMINO
SPEED 7 (DIESEL DESIGN MATCH)
TURBO
MISSION
SPEED 7 (DIESEL DESIGN MATCH)
AIR CLEANER ACCESSORIES SLAM
SLAM
BOSS
BOSS
JUDGE
RONIN
DOMINO
MISSION
SPEED 7
SPEED 7
SPEED 5
TURBINE
SPEED 7
JUDGE
TURBO
SPEED 5
TURBINE
TURBINE
SUPERVENTED OUTERS If you have purchased a RSD Air Cleaner in the past, but have fallen for one of our new styles, you can now update your air cleaner to compliment your RSD wheels, by just replacing the faceplate.
TURBINE
VENTURI RETRO-FIT KIT
SLOTTED BREATHER BOLTS
If you purchased your RSD air cleaner prior to 2010 and notice any oil dripping from the bottom filter element, this FREE kit cleans up the pesky problem. We have found that some engines make excessive crankcase pressure causing them to spew a bit more oil than others up through the breathers. This retrofit consists of slotted-head breather bolts and injection molded rubber tubes that fit securely into the backing plate of your existing air cleaner. These parts help route any oil coming out of your breathers right back into your engine without spilling a drop.
OIL TUBES
SUPERVENTED OUTERS BOSS BO
BOSS CC
DOMINO CC
JUDGE BO
JUDGE CC
MISSION CC
RONIN CC
SLAM BO
SLAM CC
SPEED 5 CC
SPEED 5 CH
0206-2032 BSS-SMB
0206-2032 BSS-BM
0206-2032 DOM-BM
0206-2032 JUD-SMB
0206-2032 JUD-BM
0206-2032 MIS-BM
0206-2032 RON-BM
0206-2032 SLM-BM
0206-2032 SLM-SMB
0206-2032 SP5-BM
0206-2032 SP5-CH
SPEED 7 BO
SPEED 7 CC
SPEED 7 CCP
SPEED 7 CH
TURBO CC
TURBO CH
TURBINE BO
TURBINE B
TURBINE CC
TURBINE CH
0206-2032 SP7-SMB
0206-2032 SP7-BM
0206-2032 SP7-BMP
0206-2032 TUR-BM
0206-2032 TUR-CH
0206-2053SMB
0206-2053B
0206-2053BM
0206-2053CH
0206-2032 SP7-CH
VENTURI AIR CLEANERS BOSS BO
BOSS CC
DOMINO CC
JUDGE BO
JUDGE CC
MISSION CC
RONIN CC
SLAM BO
SLAM CC
SPEED 5 CC
SPEED 5 CH
SPEED 7 BO
91 and up XL SPORTSTER 93 and up TWIN CAM & EVO
0206-2041SMB 0206-2042SMB
0206-2041BM 0206-2042BM
0206-2029BM 0206-2028BM
0206-2025SMB 0206-2024SMB
0206-2025BM 0206-2024BM
0206-2013BM 0206-2012BM
0206-2016BM 0206-2015BM
0206-2047SMB 0206-2045SMB
0206-2047BM 0206-2045BM
0206-2002BM 0206-2000BM
0206-2002CH 0206-2000CH
0206-2005SMB 0206-2003SMB
2008 and up FLHT
0206-2043SMB
0206-2043BM
0206-2027BM
0206-2023SMB
0206-2023BM
0206-2011BM
0206-2014BM
0206-2046SMB
0206-2046BM
0206-2001BM
0206-2001CH
0206-2004SMB
*93-06 TWIN CAM & EVO W/S&S E/G CARB
0206-2044SMB
0206-2044BM
0206-2030BM
0206-2026SMB
0206-2026BM
0206-2019BM
0206-2020BM
0206-2048SMB
0206-2048BM
0206-2017BM
0206-2017CH
0206-2018SMB
SPEED 7 CC
SPEED 7 CCP
SPEED 7 CH
TURBO CC
TURBO CH
91 and up XL SPORTSTER 93 and up TWIN CAM & EVO
0206-2005BM 0206-2003BM
0206-2005BMP 0206-2003BMP
0206-2005CH 0206-2003CH
0206-2035BM 0206-2033BM
0206-2035CH 0206-2033CH
2008 and up FLHT
0206-2004BM
0206-2004BMP
0206-2004CH
0206-2034BM
0206-2034CH
*93-06 TWIN CAM & EVO W/S&S E/G CARB
0206-2018BM
0206-2018BMP
0206-2018CH
0206-2036BM
0206-2036CH
FITMENT
FITMENT
OIL TUBE RETROFIT KIT FITMENT
PART #
2008 and up FLHT, FLHR, FLHX, FLTR
0206-4000
1993-2006 BIG TWIN W/ CV CARB
0206-4001
2002-2007 FLHT, FLHR, FLHX, FLTR W/ DELPHI EFI
0206-4001
2001 and up SOFTAIL, 2004 and up DYNA
0206-4001 0206-4000
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
567
PULL OVER RAIN SOCK When you find yourself in a sudden down pour, help prevent water from entering your engine with our new Pull Over Rain Sock. Stash it in a backpack or pocket and when the skies open, stretch it over your complete RSD air cleaner for quick & easy roadside installation, no tools required. • Compatible with ALL RSD Air Cleaners • Durable polyester pre-filter is factory treated using a proprietary hydrophobic process to repel water • Uniform micron openings allows air in while keeping debris .005” or larger and water out • Dyno & flow bench proven to maintain current performance
INTERNALLY MOUNTED RAIN SOCK If you are doing a lot of wet weather riding we recommend our Internally Mounted Rain Sock. While not a necessity for riding in the rain with a RSD Air Cleaner, it can help reduce filter saturation. • Compatible with ALL RSD Air Cleaners • Durable polyester pre-filter is factory treated using a proprietary hydrophobic process to repel water
• Uniform micron openings allow air in while keeping debris .005” or larger and water out. • Dyno & flow bench proven to maintain current performance.
SCRUB BAG While washing or storing your motorcycle, stretch our RSD Scrub Bag over your complete RSD Air Cleaner to prevent water or other debris from entering engine. • Compatible with ALL RSD Air Cleaners • Made from waterproof Denier material • Elastic enclosure seals out water and debris • Printed RSD Logo – Keep it Clean *Note: Cannot be used while engine is running. For washing and storage purposes only!
VELOCITY STACK PRE-FILTER/RAIN SOCK
VELOCITY STACK
Uniform micron openings allows air in while keeping debris and water out.
Performance engines require a lot of airflow to create serious power, and that requires a high-flowing induction system. Use our velocity stack to smooth the airflow into the he throttle body/carb’s throat for optimized fuel delivery. • RSD Logo Laser engraved onto backing plate * Not legal for sales or pollution controlledd ve vehic hicles less vehicles • Drilled breathers included ble * No filtration element included or available
• Compatible with all RSD Velocity Stacks • FFilters ilterss out ou larg larger arger er particles particcle par les of debris deebris ddown to .005” •H Hydrophobic yd oph ydr ophobi obi bicc manu bi m manufacturing a fac anu factur fa turing ingg pr proce process o ss repels water oce
VELOCITY STACK - DIRECT FIT Allows RSD Velocity stack to be used on any model HD with S&S Super E or G carb installed. lle led. d. • Bolts directly to S&S Super E or G carb • No backing plate • Mounting hardware and gaskets included • CNC machined from billet aluminium
* Not legal for sales or pollution controlled vehicles ehic h cles hi lees les * No filtration element included or available * Breather system must be purchased seperately atel elyy ffor el or or models requiring one
NOSTALGIA VELOCITY STACK
RSD VELOCITY STACK FITMENT
FINISH
PART #
S&S E, G CARB
BLACK ANO
0204-2006-B
S&S E, G CARB
CHROME
0204-2006-CH
RSD VELOCITY STACK PREFILTER FITMENT FITS ALL RSD V-STACKS OR 3 3/4" V-STACKS
568
PART # 0206-0082
FITMENT
FINISH
PART #
BLACK ANO
0204-2000-B
1999-06 TWIN CAM W/ S&S E, G CARB
CHROME
0204-2000-CH
1993-06 BIG TWIN W/ CV CARB, 2001 and up BIG TWIN W DELPHI EFI EXCEPT 2008 and up DRESSER/HD-FL TRIKE
BLACK ANO
0204-2001-B
1993-06 BIG TWIN W/ CV CARB, 2001 and up BIG TWIN W DELPHI EFI EXCEPT 2008 and up DRESSER/HD-FL TRIKE
CHROME
0204-2001-CH
1991 and up XL W/ CV CARB, DELPHI EFI
BLACK ANO
0204-2005-B
1991 and up XL W/ CV CARB, DELPHI EFI
CHROME
0204-2005-CH
1999-06 TWIN CAM W/ S&S E, G CARB
BLACK LINE In the early days HD was making a name for itself on dirtracks worldwide against Triumph, BSA, Indian and countless other brands. When it comes to big twins HD seems to of forgotten how much fun a massive V-twin can be in the dirt. That takes us to our Blackline. First we fully stripped her down and chopped off everything extra. Next was to add back to get her dirtrack ready. 19” RSD Judge wheels are the biggest attitude change along with Goodyears, a new fender and mount, RSD spring seat kit, prototype bars and gauge re-locator, among a host of other little changes and RSD parts. Dirty and narrow minded, just the way we like it.
BLACK LINE WISHLIST PART
FINISH
PART #
CLARITY AIR CLEANER
BLACK OPS
0206-2059-SMB
CLARITY DERBY COVER
BLACK OPS
0177-2006-SMB
CLARITY CAM COVER
BLACK OPS
0177-2003-SMB
AVENGER LEVER SET FRONT MASTERCYLINDER CAP
BLACK OPS BLACK OPS
0062-4012-SMB 0208-2036-SMB
CHRONO GRIPS (CABLE)
BLACK OPS
0063-2036-SMB
CHRONO FOOT PEGS
BLACK OPS
0035-1093-SMB
CHRONO TOE PEG
BLACK OPS
0033-1129-SMB
TRACKER BELT GUARD
BLACK OPS
0217-2003-TBP
TRACKER FORK BRACE
BLACK OPS
0208-2029-TBP 0210-2007-SMB
TRACKER GAS CAP
BLACK OPS
JUDGE WHEEL - F 19X3
BLACK OPS
JUDGE WHEEL - R 19X3 SPROCKET BRAKE
BLACK OPS
REAR HUB KIT - STANDARD BLACK LINE
BLACK
JUDGE PULLEY
BLACK OPS
JUDGE DISC - F 13”
BLACK OPS
JUDGE DISC - R 11.5”
BLACK OPS
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
569
WHEELS Our wheels begin with an aerospace quality, aluminum forgings that place the highest material strength in the same direction as the operating load, creating a light and strong wheel. From there we create the array of styles you see on our bikes throughout this catalog using CAD design software. Each wheel design must pass rigorous and intensive testing.
WHEEL TESTING TORSIONAL LOAD TESTING The torsional load testing machine simulates starting and stopping, as well as the occasional burn out. Load sensitive rams cycle back and forth replicating real world style torture in an attempt to rip the hub out of the rim. SIDE LOAD TESTING Side load testing replicates the incredible stress a wheel is subjected to during cornering. You can trust your RSD wheels will withstand those canyon roads and track days because they’ve come out of the simulated side load test unscathed. RADIAL LOAD TESTING The radial load testing machine simulates a load on a tire/wheel assembly while taking miles and miles of road with the occasional beating. The wheel is forced to endure countless rotations with one flaw sending the design back to the drawing board. IMPACT TESTING The massive impact testing unit simulates the pot holes and road hazards that a wheel is subjected to in the real world. Each and every wheel design is wrapped with a tire and a hard edge hit is replicated. The wheel must retain air pressure for a specific time in order to pass.
FORGED ALUMINUM PULLEY
TWO-PIECE ROTORS
Motorcycles are more than just a hobby; they’re a way of life. Reflecting the power of innovation, aesthetics and the inner workings, we give each one of our parts a soul. Each has its intended niche; each has its own style. Pulleys are no exception. The precision-hobbed tooth profiles are designed to fit your bike’s belt perfectly. Built for performance and designed for longevity.
For us, rotor design is more than just mimicking the look of our wheels; it is both science and art. Its taking all that we have learned through the years and improving upon it. We design each rotor from the ground up and analyze every detail’s function along the way. Our two-piece design allows the rotor to expand and contract when heated from the friction caused by the brake pad. The aerated portholes on the stainless steel outer band vent heat and dust away from the disc.
FEATURES • CNC Machined from aluminum forging • Hard anodized teeth • Special adapter included allowing fitment of 1.95˝, 2.22˝ and 2.50˝ O.D. hub flanges • 2000-06 Softail 2000 06 So 2000 oftail pulleys pu ley pul leyss include incl nclude ude mounting mo in boltss • Stainless belt retainer Stainle Stai nless s ste ssteel st el bel e t reta eta taine inerr bolt bbolts oltss iincluded nclude ncl d d
All RSD wheels, discs and pulleys are available in Black Ops, Contrast Cut, Chrome and Polish. Contact Performance Machine for any other custom finish options you are interested in.
570
FEATURES • High grade 420 stainless steel replaceable outer bands • Billet aluminum CNC-machined inner carriers • Cross drilled bands for increased ventilation • Blanchard ground bands ensure precise and even tolerance • 11.5˝ and 300mm rotors are fixed • 13˝ rotors attach via floating elements • Front rotors are drilled for standard HD bolt pattern 3-1/4˝ X 5˝ X 5/16˝
• Rear rotors are drilled for standard HD bolt pattern 3-1/4˝ X 5˝ X 3/8˝ • All rotor carriers are counter bored with 2.22˝ I.D • A reducer spacer (part# 0012-0227QN) is sold separately for 1.985˝ I.D. • Wide rear wheels require use of rotors with 2.50˝ I.D. * RSD rotors will fit 1984-1999 HD applications only if used in conjunction with Performance Machine calipers and RSD wheels * RSD rotors will not work with stock HD wheels
DIESEL WHEEL BLACK OPS The diesel just got better. Our most popular wheel is now available with our Black Ops finish. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Rim Lip Detail
DIESEL WHEEL CONTRAST CUT One of our most popular wheels, the Diesel is clean yet mean. We introduced the drilled rim lip speed dots on this wheel to help compliment it’s simple design and give it just enough pop to be a stand out. The Diesel wheel will flow with whatever bike you put it on. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Rim Lip Detail
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
571
JUDGE WHEEL BLACK OPS The Judge is back with a vengeance in Black Ops Finish. Five spokes of fury make black even blacker. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner
JUDGE WHEEL CONTRAST CUT The Judge is the original Contrast Cut wheel, the one that started it all. The great thing about the judge is it still looks as good today as it did when it was first introduced and continues to be one of Roland’s personal favorites. It has just enough hot rod and race inspiration to make it look good on anything. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner
572
SLAM WHEEL BLACK OPS Slam a set on anything for an instant weight reduction and high performance twist with just enough detail work to make the Black Ops come alive in two shades of black. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Rim Lip Detail • RSD Logo Badge
SLAM WHEEL CONTRAST CUT SL HHu Huge rim pockets remove tons of weight while still retaining a ro rolled rim lip. Coupled with speed dots and super aggressive st straight spokes the Slam is up to the task of making your motorcycle turn faster while looking unlike any other machine. cy FFEATURES FE • FFully sealed, maintenance free – deep groove wheel bearings •D Design matched discs, pulley and air cleaner •R Rim Lip Detail • RSD Logo Badge
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
573
BOSS WHEEL BLACK OPS The Boss in Black Ops is the epitome of subtlety and design smashed together in one stealthy, high performance package. Bolt a set of these on for instant tough. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Rim Lip Detail • RSD Logo Badge
BOSS WHEEL CONTRAST CUT The Boss in Contrast Cut is striking. The contrast cut finish on this wheel is second to none with an amazing amount of detail while staying lightweight. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Rim Lip Detail • RSD Logo Badge
574
DOMINO WHEEL CONTRAST CUT As far as aggression and purpose, this wheel gets the job done as effectively as possible. It’s simple yet directed design splits 9 into 18 spokes and is visually and architecturally built with structure in mind. This wheel will look at home on a race inspired bike as well as a cross country road bomber. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner
MISSION WHEEL CONTRAST CUT The Mission is simple, concise and designed to complement the detail work. CNC-machined aluminum, machined twice to offer black anodized speed dots, double pin stripes and a red RSD logo. Mission accomplished. FEATURES • Fully sealed, maintenance free – deep groove wheel bearings • Design matched discs, pulley and air cleaner • Double radial rim lip grooves • RSD Logo Badge
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
575
HURLEY SCRAMBLER/CAFE The Hurley Sportster started as a collaboration with Hurley and RSD to build a surf worthy café bike. We shot a few pictures of her as a café racer and somewhere on the way to the beach we decided moto bars, dual purpose tires and a solo seat were a better fit and she was transformed into the Hurley Scrambler. It really goes to show what a versatile bike the sportster is and how easy it is to change a few parts and get something very different.
HURLEY SCRAMBLER/CAFE WISHLIST PART
FINISH
REGULATOR LEVER SET
CONTRAST CUT
0062-4005-BM
CHRONO GRIPS
CONTRAST CUT
0063-2036-BM
CHRONO FOOTPEGS
CONTRAST CUT
0035-1093-BM
CHRONO TOE PEG
CONTRAST CUT
0033-1129-BM
TRACKER GAS CAP
CONTRAST CUT
0210-2007-BM
TRACKER BELT GUARD
BLACK
0217-2002-BP
TURBINE AIR CLEANER
CONTRAST CUT
0206-2039-BM
TRACKER FORK BRACE
BLACK
0208-2034-BP
TRACKER 2-INTO-1 BY V & H
BLACK
NOSTALGIA IGNITION COVER
BLACK
0177-2012-B
FRONT MASTER CYLINDER CAP
CONTRAST CUT
0208-2038-BM
CLIP ONS - 39MM
BLACK
0208-2039-B
CAFÉ GAUGE & HEADLIGHT RELOCATOR
BLACK
0207-2001-B
COIL IGNITION RELOCATOR
POLISH
0205-2009
CAFÉ SPORTSTER SEAT
576
PART #
BOSS WHEEL - F 19X2.15
CONTRAST CUT
BOSS WHEEL - R 18X4.25
CONTRAST CUT
BOSS DISC - F 13"
CONTRAST CUT
BOSS DISC - R 11.5"
CONTRAST CUT
CAFE SPORTSTER The RSD line of Café Sportster Products easily convert a late model Sportster into an aggressive yet comfortable café racer, while retaining all the function and reliability of the OEM wiring, headlight and speedometer.
CAFE GAUGE AND HEADLIGHT RE-LOCATOR The Café Gauge and Headlight Re-locator lowers your headlight and gauges to a more sleek position from the top handlebar clamp down to the front of the top triple clamp and lowers the stock headlight 2 inches. This allows for the use of any aftermarket risers or complete elimination of risers for use of the RSD Café 39mm Clip-Ons. FEATURES • Eliminates stock Sportster headlight visor/eyebrow • LED warning/indicator light sold separately
CAFÈ GUAGE & HEADLIGHT RELOCATOR FITMENT FINISH PART # 2007 and up SPORTSTER*
BLACK
0207-2001-B
2007 and up SPORTSTER*
CHROME
0207-2001-CH
* Except 2011-12 1200X, 1200C
LED INDICATOR KIT FITMENT 2007 and up SPORTSTER
PART # 0207-2003
LED INDICATOR When utilising the RSD Café Gauge and Headlight Re-locator, keep your LED light functionality with a LED unit. FEATURES • Optional component for RSD Cafe Gauge & Headlight Re-locator ONLY (not compatible w/ OEM gauge mount) • Allows all OEM warning & indicator functions (Outer Green: L&R Turn indicators, Red: Oil Pressure, Blue: High Beam & Center Green: Neutral) • 5 LED lights in one arc-shaped weather-proof unit • 12” long wiring lead • Wire insulation color matched to OEM wiring for ease of installation • Wires must be soldered and heat shrunk to OEM harness for proper installation
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
577
CLIP-ON HANDLEBARS 39MM, 41MM, 49MM The RSD 1” Clip-Ons mount to 39mm, 41mm or 49mm front forks, below the top triple clamp, for a low handlebar position. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings.
CAFÈ CLIP ONS 39mm, 41mm and 49mm FEATURES
FITMENT
• Adjustable to any pullback 1988 and up XLR & FXR and any height between top and bottom triple clamps 1988 and up XLR & FXR • Fixed 5 degree down angle 1988 and up XLR & FXR • Replaces top mounted handlebars and risers 1984 and up SOFTAIL FXST • Bar is 1” diameter to accept 1984 and up SOFTAIL FXST stock or aftermarket hand controls 1984 and up SOFTAIL FXST • Bars slotted for external wiring 2006 and up DYNA and black anodized • Black Ops has a gloss black 2006 and up DYNA bar w/a contrasting textured 2006 and up DYNA black and gloss black clip on
SIZE
FINISH
PART #
39MM FORKS
BLACK ANO
0208-2039-B
39MM FORKS
BLACK OPS
0208-2039-SMB
39MM FORKS
CHROME
0208-2039-CH
41MM FORKS
BLACK ANO
0208-2041-B
41MM FORKS
BLACK OPS
0208-2041-SMB 0208-2041-CH
41MM FORKS
CHROME
49MM FORKS
BLACK ANO
0208-2042-B
49MM FORKS
BLACK OPS
0208-2042-SMB
49MM FORKS
CHROME
0208-2042-CH
• 39mm Clip-Ons utilize all stock wiring, so there is no cutting or soldering. • 41mm and 49mm Clip-Ons may need to shorten, cut and/or solder wiring, depending on current bar height *41mm and 49mm are not recommended for use with stock hand controls, due to clearance issues. A modified gas tank is recommended.
578
HAND & FOOT CONTROLS
MASTER CYLINDER CAPS Stylize your OEM hand controls with RSD’s stock replacement front brake master cylinder cap. FEATURES • Interchangeable RSD Logo Badges (Black & Brass)
2008 20 008 aand nd uupp FFLHT LHTT LH
2004 and 2004 and n upp SPORTSTER SPO PORTSTTER
2006 and up SOFTAIL DYNA SPORTSTER OFT FTAILL & DY YNA & 22005-2007 0 5-20 00 2007 07 FFL, L, 11996-2003 L, 9 1996-2005 SOFTAIL 1996-2004 966 20005 SOFTA AIL IL & DDYNA YNAA & 19 YN 1996 96-22 FLHT
FRONT MASTER CYLINDER CAPS FITMENT 2008 and up FLHT, FLHR, FLHX, FLTR
BLACK-OPS CONTRAST CUT 0208-2035-SMB
0208-2035-BM
CHROME 0208-2035-CH
2006 and up FXST/FLST/FXD, 05-07 FLHT, FLHR, FLHX, FLTR
0208-2036-SMB
0208-2036-BM
0208-2036-CH
96-05 FXST/FLST/FXD, 96-04 FLT, FLHT, FLHR, FLHX, FLTR, 96-03 XL
0208-2037-SMB
0208-2037-BM
0208-2037-CH
2004 and up XL
0208-2038-SMB
0208-2038-BM
0208-2038-CH
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
579
REGULATOR LEVERS These race inspired levers are not only stylish stock replacements, but customizable for any size mitt. Enjoy the comfort of adjustability and a wide finger pull area on the RSD Regulator Lever. FEATURES • Direct bolt-on to stock controls • Twist adjuster easily modifies the lever distance from the handlebar • CNC machined from billet aluminum • Lever surface shape designed for a comfortable and smooth feel • Laser-engraved RSD logo • Brake and Clutch lever sold separately, or as a set
AVENGER LEVERS Race-styled stock replacement levers add an aggressive look to your OEM controls.
SET
REGULATOR LEVER -
FEATURES • Direct bolt-on to stock controls • CNC machined from billet aluminum • Lever surface shape designed for a comfortable and smooth feel • Laser-engraved RSD logo • Brake Brak a e aand ak n Clu nd Clutch utch lever sold separa separately, ately, or as a a set
PART #
PART #
PART #
2008 and up FLHT
BLACK OPS
0062-4004-SMB
0062-2055-SMB
0062-2054-SMB
2008 and up FLHT
CONTRAST CUT
0062-4004-BM
0062-2055-BM
0062-2054-BM
2008 and up FLHT
CHROME
0062-4004-CH
0062-2055-CH
0062-2054-CH
1996 and up BIGTWIN, 96-03 XL
BLACK OPS
0062-4006-SMB
0062-2057-SMB
0062-2056-SMB
1996 and up BIGTWIN, 96-03 XL
CONTRAST CUT
0062-4006-BM
0062-2057-BM
0062-2056-BM
1996 and up BIGTWIN, 96-03 XL
CHROME
0062-4006-CH
0062-2057-CH
0062-2056-CH
2004 and up XL SPORTSTER
BLACK OPS
0062-4005-SMB
0062-2059-SMB
0062-2058-SMB
2004 and up XL SPORTSTER
CONTRAST CUT
0062-4005-BM
0062-2059-BM
0062-2058-BM
2004 and up XL SPORTSTER
CHROME
0062-4005-CH
0062-2059-CH
0062-2058-CH
SET
AVENGER LEVER -
All the clean style of the Avenger levers with the added comfort of a soft touch rubber inlay for long days of heavy clutch pulls and quick stops. FEATURES • Direct bolt-on to stock controls • Avenger Inlay style features a rubber inlay added for grip and comfort omf mfort orrt • CNC machined from billet aluminum • Lever surface shape designed comfortable signed sig ned fo forr a co comfo mforta rtable ble and and smooth smooth sm ooth feel feel fee • Laser-engraved aser-e ase r ngrave r-e ngr graved R RSD SD log llogoo Brake Clutch separately, •B rakee aand rak n Cl nd C Clu tch le lever v so ver ssold ld sep e ara a tel tely, y, or o as a set set se
580
CLUTCH
FINISH
FITMENT
AVENGER INLAY LEVERS
BRAKE
FITMENT
FINISH
PART #
BRAKE
PART #
CLUTCH
PART #
2008 and up FLHT
BLACK OPS
0062-4010-SMB
0062-2069-SMB
0062-2068-SMB
2008 and up FLHT
CONTRAST CUT
0062-4010-BM
0062-2069-BM
0062-2068-BM
2008 and up FLHT
CHROME
0062-4010-CH
0062-2069-CH
0062-2068-CH
1996 and up BIGTWIN, 96-03 XL
BLACK OPS
0062-4012-SMB
0062-2071-SMB
0062-2070-SMB
1996 and up BIGTWIN, 96-03 XL
CONTRAST CUT
0062-4012-BM
0062-2071-BM
0062-2070-BM
1996 and up BIGTWIN, 96-03 XL
CHROME
0062-4012-CH
0062-2071-CH
0062-2070-CH
2004 and up XL SPORTSTER
BLACK OPS
0062-4011-SMB
0062-2073-SMB
0062-2072-SMB
2004 and up XL SPORTSTER
CONTRAST CUT
0062-4011-BM
0062-2073-BM
0062-2072-BM
2004 and up XL SPORTSTER
CHROME
0062-4011-CH
0062-2073-CH
0062-2072-CH
SET
AVENGER INLAY LEVER -
FITMENT
BRAKE
CLUTCH
FINISH
PART #
PART #
2008 and up FLHT
BLACK OPS
0062-4007-SMB
0062-2062-SMB
0062-2061-SMB
PART # 0062-2061-BM
2008 and up FLHT
CONTRAST CUT
0062-4007-BM
0062-2062-BM
2008 and up FLHT
CHROME
0062-4007-CH
0062-2062-CH
0062-2061-CH
1996 and up BIGTWIN, 96-03 XL
BLACK OPS
0062-4009-SMB
0062-2064-SMB
0062-2063-SMB 0062-2063-BM
1996 and up BIGTWIN, 96-03 XL
CONTRAST CUT
0062-4009-BM
0062-2064-BM
1996 and up BIGTWIN, 96-03 XL
CHROME
0062-4009-CH
0062-2064-CH
0062-2063-CH
2004 and up XL SPORTSTER
BLACK OPS
0062-4008-SMB
0062-2066-SMB
0062-2065-SMB
2004 and up XL SPORTSTER
CONTRAST CUT
0062-4008-BM
0062-2066-BM
0062-2065-BM
2004 and up XL SPORTSTER
CHROME
0062-4008-CH
0062-2066-CH
0062-2065-CH
CHRONO GRIPS, FOOT & TOE PEGS
CHRONO GRIPS FITMENT
FINISH
PART #
1984 and up HD DUAL CABLE MODELS
BLACK OPS
0063-2036-SMB
1984 and up HD DUAL CABLE MODELS
CONTRAST CUT
0063-2036-BM
1984 and up HD DUAL CABLE MODELS
CHROME
0063-2036-CH
1984 and up HD DUAL CABLE MODELS
BRASS
0063-2041
2008 and up FLHT MODELS W/ E.T.C*
BLACK OPS
0063-2037-SMB
2008 and up FLHT MODELS W/ E.T.C*
CONTRAST CUT
0063-2037-BM
2008 and up FLHT MODELS W/ E.T.C*
CHROME
0063-2037-CH
2008 and up FLHT MODELS W/ E.T.C*
BRASS
0063-2042
REPLACEMENT GRIP RUBBER
Time is on your side with the RSD Chrono line. Inspired p byy unique q time pieces, ppiece ces, s,, the the Chrono Chrron onoo line lliine offers offffer erss a high level of detailing and design. FEATURES • CNC Machined from billet aluminum • Grip - Renthal™ rubber material • Foot Peg – Custom Knurled RSD rubberr • Interchangeable RSD Logo Badges (Black Brass) acck & Br Brass as ) • RSD laser engraved logo • Grips & Foot Pegs sold as a pair • Replacement grip rubber r bbe ru bberr avai aavailable vailab able be
0063-1013 ELECTRONIC THROTTLE CONTROL*
CHRONO FOOT PEGS FINISH
PART #
UNIVERSAL MALE MOUNT
FITMENT
BLACK OPS
0035-1093-SMB
UNIVERSAL MALE MOUNT
CONTRAST CUT
0035-1093-BM
UNIVERSAL MALE MOUNT
CHROME
0035-1093-CH
UNIVERSAL MALE MOUNT
BRASS
0035-1095
CHRONO TOE/SHIFTER PEG FITMENT
FINISH
PART #
UNIVERSAL
BLACK OPS
0033-1129-SMB
UNIVERSAL
CONTRAST CUT
0033-1129-BM
UNIVERSAL
CHROME
0033-1129-CH
UNIVERSAL
BRASS
0033-1131
TRACKER GRIPS FITMENT
FINISH
PART #
1984 and up HD DUAL CABLE MODELS
BLACK OPS
0063-2019-SMB
1984 and up HD DUAL CABLE MODELS
CONTRAST CUT
0063-2019-BM
1984 and up HD DUAL CABLE MODELS
CHROME
0063-2019-CH
1984 and up HD DUAL CABLE MODELS
BRASS
0063-2030
2008 and up FLHT MODELS W/ E.T.C*
BLACK OPS
0063-2022-SMB
2008 and up FLHT MODELS W/ E.T.C*
CONTRAST CUT
0063-2022-BM
2008 and up FLHT MODELS W/ E.T.C*
CHROME
0063-2022-CH
2008 and up FLHT MODELS W/ E.T.C*
BRASS
0063-2031
REPLACEMENT GRIP RUBBER
0063-1013 ELECTRONIC THROTTLE CONTROL*
TRACKER FOOT PEGS FITMENT
FINISH
DYNA-SPORTY 45 DEG MALE MOUNT
BLACK OPS
0035-1087-SMB
DYNA-SPORTY 45 DEG MALE MOUNT
CONTRAST CUT
0035-1087-BM
DYNA-SPORTY 45 DEG MALE MOUNT
CHROME
0035-1087-CH
TRACKER GRIPS, FOOT & TOE PEGS Comfort and control are obviously very important when ripping down the highway. We are big fans of being in control and our Renthal wrapped Tracker Grips are the perfect link from your hands to to your yoour bike. bik i ee.. Tacky Tac acky k comfortable ky com omfo fortrtab fo abble rubber rub ubbe bbeer with a profile that matches the contour of your hand are critical and the tracker grips kerr gr ke grip ipss provide prov pr ovid ov idee th id that at ccombo. om mbo b. FEATURES • CNC Machined from billet aluminum • Grip - Renthal™ rubber material • Foot Peg – Custom Knurled RSD rubber • RSD laser engraved logo • Grips & Foot Pegs sold as a pair • Replacement grip rubber available
PART #
DYNA-SPORTY 45 DEG MALE MOUNT
BRASS
0035-1090
HD STRAIGHT MALE MOUNT
BLACK OPS
0035-1088-SMB
HD STRAIGHT MALE MOUNT
CONTRAST CUT
0035-1088-BM
HD STRAIGHT MALE MOUNT
CHROME
0035-1088-CH
HD STRAIGHT MALE MOUNT
BRASS
0035-1091
TRACKER TOE/SHIFTER PEG FITMENT
FINISH
PART #
UNIVERSAL
BLACK OPS
0033-1126-SMB
UNIVERSAL
CONTRAST CUT
0033-1126-BM
UNIVERSAL
CHROME
0033-1126-CH
UNIVERSAL
BRASS
0033-1127
See your local Drag Specialties dealer for pricing and availability. Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
581
STRAIGHT MALE MOUNT
45º MALE MOUNT
MOTO FOOT PEGS Inspired by our passion for motocross styling, we decided to bring a little dirt to the road. Intentionally designed with a featherweight, ventilated body and aggressive tooth pattern for performance and grip. FEATURES • Direct stock replacement for HD male mount pegs • Fits driver and passenger mounts •Chrome mounting hardware kit sold separately
582
*Straight male mount pegs (pictured) are used on all HD models, including Sportster & Dyna passenger peg applications *45 degree male mount pegs are used on all Sportster and Dyna driver peg applications
DESMO TRACKER Some call it Sacrilege, some call it madness and others call it more fun than you should be allowed to have on a motorcycle. No matter how you stack it, the Desmo Tracker was a shocking build. We started with a Ducati Desmocedici Moto GP replica and ended with a Desmo powered Dirt eating monster we call the Desmo Tracker. The results are a 200 HP street legal Moto GP Flat Tracker finished with love and care by the team at RSD in about two months.
See your local Drag Specialties dealer for pricing and availability. Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
583
HANDLEBARS Comfort, attitude and quality are the priorities when picking a handlebar and at RSD we understand that. We’ve pioneered new frontiers with our Vintage Bars, Ribbed Bars and now the Cross Bars making a handlebar more than just a handlebar. Made in America of the highest quality materials and tested both in the lab and real world, RSD bars are often imitated but never duplicated. Stick with the original, you won’t be disappointed.
HANDLEBARS FEATURES
584
• Multiple height and style options • High quality hand TIG welding • Manufactured in the USA
• Tested for strength and integrity • Accepts stock or aftermarket hand controls
MOTO CROSSBAR Low rise aggressive motocross bend handlebar with a stylized billet crossbar. FEATURES • Heim joints on both ends of the crossbar add a mechanical look and allow crossbar to be tightened until snug • Slotted and drilled for internal wiring • Knurling at 3.5” on center
• 1” diameter to accept stock or aftermarket hand controls • Contrast Cut is a gloss black bar with a Contrast Cut Crossbar • Black Ops is a textured black bar with a Black Ops Crossbar
39-3/4” WIDE X 5-1/4” RISE X 6” CENTER WIDTH X 3-5/8 PULLBACK
PULLBACK
WIDTH
RISE CENTER
MINI APE CROSSBAR The RSD High rise mini ape with a stylized billet crossbar will take you back to your BMX days. FEATURES • Heim joints on both ends of the crossbar add a mechanical look and allow crossbar to be tightened until snug • Slotted and drilled for internal wiring • Knurling at 3.5” on center
• 1” diameter to accept stock or aftermarket hand controls • Contrast Cut is a gloss black bar with a Contrast Cut Crossbar • Black Ops is a textured black bar with a Black Ops Crossbar
33” wide x 9” rise x 5 3/4” center width x 5 1/2” pullback WIDTH PULLBACK
RISE CENTER
1” MOTO CROSSBAR HANDLEBAR
1” MINI APE CROSSBAR HANDLEBAR
FITMENT
FINISH
PART #
FITMENT
FINISH
STANDARD
BLACK OPS
0173-1857-TBP
STANDARD
BLACK OPS
0173-1856-TBP
STANDARD
CONTRAST CUT
0173-1857-BP
STANDARD
CONTRAST CUT
0173-1856-BP
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
PART #
585
RISE
VINTAGE HANDLEBAR
CENTER
The Vintage bar is RSD’s twist on the classic ape hanger … The true “Made in America” original gusseted ape and its flowing radius tubes and riding position are unmatched in style, design and quality. The stance will give you the aggressive yet comfortable riding position you are looking for and our end caps make it extremely easy to run internal wiring. If quality and originality are important to you, then look no further.
30” Wide x 12” Rise x 6-1/2” Center Width WIDTH PULLBACK
FEATURES • Springer bars feature knurling for risers at 4-3/4” on-center • Multi-hole drilled corner gusset offers strength & rigidity • Black bar features a gloss black bar & Chrome moon end caps • Black Ops features a textured black bar & gloss black moon end caps
• Available For standard or springer applications • 1” diameter to accept stock or aftermarket hand controls • Slotted and drilled for internal wiring • Standard bars feature knurling for risers at 3-1/2” on-center
Note: Springer bars are not for use with OEM Crossbones FLSTSB (x-bones) OEM Risers
1” VINTAGE HANDLEBARS FITMENT
FINISH
PART #
STANDARD
BLACK
0173-1838-BP
STANDARD
BLACK OPS
0173-1838-TBP
STANDARD
CHROME
0173-1838-CH
SPRINGER FRONT END
BLACK
0173-1839-BP
SPRINGER FRONT END
BLACK OPS
0173-1839-TBP
SPRINGER FRONT END
CHROME
0173-1839-CH
1” VINTAGE SHORT STACK HANDLEBARS FITMENT
FINISH
PART #
STANDARD
BLACK
0173-1828-BP
STANDARD
BLACK OPS
0173-1828-TBP
STANDARD
CHROME
0173-1828-CH
SPRINGER FRONT END
BLACK
0173-1830-BP
SPRINGER FRONT END
BLACK OPS
0173-1830-TBP
SPRINGER FRONT END
CHROME
0173-1830-CH
VINTAGE SHORT STACK HANDLEBAR
30” Wide x 7-1/2” Rise x 6-1/2” Center Width x 3-3/4” pullback
PULLBACK
WIDTH
Simply a shorter version of the taller Vintage bars. The short stack bars give you all the same features but with less stretch of the down tubes. FEATURES • Available for standard or springer applications • 1” diameter to accept stock or aftermarket hand controls • Slotted and drilled for internal wiring • Standard bars feature knurling for risers at 3-1/2” on-center • Springer bars feature knurling for risers at 4-3/4” on-center • Stylish multi-hole drilled corner gusset offers strength and rigidity • Black bar features a gloss black bar & Chrome moon end caps • Black Ops features a textured black bar & gloss black moon end caps
RISE
Note: Springer bars are not for use with OEM Crossbones Risers CENTER
586
VINTAGE KING APE HANDLEBAR It seems like you can never make an ape hanger bar too big so we shot for the sky with our King Ape. We borrowed some style from our classic Vintage bar and made everything a little larger, including the tubing diameter to give you a punk tall bar with attitude, style and quality hand TIG welding. No swaging or uneven surfaces on these bars. If you’re looking for high quality, look no further. FEATURES • Black bar features a gloss black bar • Black Ops has a textured black handlebar • Slotted and drilled for internal wiring • Knurling for risers at 3-1/2” on-center (non-springer) • Multi-hole drilled corner gusset offers strength & rigidity
• 1-1/4” diameter bars with 1” diameter center mounting surface & control clamping surface • Accepts stock or aftermarket hand controls handlebar clamps & risers • Use of aftermarket hydraulic clutch master cylinders
PULLBACK
19’’ Style- 38” Wide x 19” Rise x 9-3/4” Center Width x 6-1/4’’ Pullback 16’’ Style - 36-1/2” Wide x 16” Rise x 9-3/4” Center Width x 6’’ Pullback WIDTH
RISE CENTER
PULLBACK
27” Wide x 6” Rise x 4” Pull Back WIDTH
T-BAR HANDLEBAR The RSD T-bar is an original take on a timeless design. We took the classic T-bar shape and added our signature radius ribbing for an extra detail. Not too tall, not too short, these bars are perfect for a clean yet comfortable ride while still looking tough. RISE
1” T-BAR HANDLEBARS FITMENT
FINISH
STANDARD
CHROME
PART #
FEATURES • One of a kind “Ribbed” accents • 1” diameter to accept stock or aftermarket hand controls and/ or hydraulic clutch • 6” tall integrated risers with 3-1/2” on-center bolt pattern
• Slotted for hand controls • Not recommended for internal wiring • Internally threaded for 1/2”-13 hardware (not included)
0173-1855-CH
1-1/4” VINTAGE KING APE HANGER HANDLEBARS
FITMENT
FINISH
PART #
STANDARD 16”
BLACK
0173-1852-BP
STANDARD 16”
BLACK OPS
0173-1852-TBP
STANDARD 16”
CHROME
0173-1852-CH
STANDARD 19”
BLACK
0173-1853-BP
STANDARD 19”
BLACK OPS
0173-1853-TBP
STANDARD 19”
CHROME
0173-1853-CH
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
587
FLAT-OUT DRAG HANDLEBAR Built for down low, no frills riding. Our most aggressive bend for those that want to keep their head down and the speed up. FEATURES • 1” diameter to accept stock or aftermarket hand controls • Slotted and drilled for internal wiring • To clear stock Softail tank, use ribbed riser extension
• Integrated risers are threaded at 3-1/2” on-center with 1/2”-13 threads to fit most stock HD applications • Black bar features a gloss black bar
32” wide x 1-1/2” rise x 4” pullback PULLBACK
PULLBACK
WIDTH
RISE
1” FLAT-OUT DRAG STYLE HANDLEBARS FITMENT FINISH PART # STANDARD
BLACK
0173-1827-BP
STANDARD
CHROME
0173-1827-CH
CONVOY HANDLEBAR Add style and attitude with a slightly higher hand position for an aggressive feel, giving more control than the stock bar. • Available for all FLHT Models with Batwing Fairings • 1” diameter to accept stock or aftermarket hand controls • Will work with stock cables and brake lines • Slotted and drilled to allow internal wiring • Knurling for risers at 4” on-center • Stylish multi-hole drilled corner gusset offers strength & rigidity • Billet aluminum end caps included • Black bar features a gloss black bar & Chrome moon end caps
34.5” wide x 9” rise x 14.75” center width x 6” pullback
PULLBACK
WIDTH
RISE CENTER
588
1” CONVOY FL HANDLEBARS FITMENT
FINISH
PART #
1986-2007 FLHT/FLHX
BLACK
0173-1832-BP
1986-2007 FLHT/FLHX
CHROME
0173-1832-CH
2008 and up FLHT/FLHX
BLACK
0173-1841-BP
2008 and up FLHT/FLHX
CHROME
0173-1841-CH
GLIDER HANDLEBAR Bent similar to stock bars for the rider who wants style but doesn’t want to change hand position. Soar across the open road with this perfect cohesion of style and comfort. FEATURES • Available for all FLTR Models with Fairings • 1” diameter to accept stock or aftermarket hand controls • Will work with stock cables and brake lines • Slotted and drilled to allow internal wiring • Knurling for risers at 3-1/8” on-center • Stylish multi-hole drilled corner gusset offers strength & rigidity • Billet aluminum end caps included • Black bar features a gloss black bar & Chrome Chrrome me mo moon o end capss
PULLBACK
33” wide x 9” rise x 7-3/4” center width x 4” pullback WIDTH
RISE CENTER
LAZY BOY HANDLEBAR
LAZY BOY HANDLEBAR
The RSD Moto Risers are built for abuse and designed and engineered for a light weigh yet durable connection of the handlebars to your top triple clamp.
Designed for the big cruiser, these bars are bent so you can relax and enjoy your Sunday ride with the utmost comfort.
FEATURES • Accept stock or aftermarket 1” diameter handlebars • 1-1/2” • Chrome pinch bolts included • Drilled and tapped for 1/2”-13 mounting bolts
33” Wide x 9” Rise x 14” Center Width x 5-3/4” Pullback WIDTH PULLBACK
FEATURES • Fitments Available For All FLHT Models with Batwing Fairings • 1” diameter to accept stock or aftermarket hand controls • Will work with stock cables and brake lines • Slotted and drilled to allow internal wiring • Knurling for risers at 3-1/2” on-center • Stylish multi-hole drilled corner gusset offers strength & rigidity • Billet aluminum end caps included • Black bar features a gloss black bar & Chrome moon end caps
RISE
FLAT-OUT RISER EXTENSIONS
CENTER
Designed to compliment our Flat-Out Drag handledledl e ebars and give crucial lift in order to clear a stockk Softail tank. They can also be used to offer extra llift ifft to any risers and add style to the front of your bike. e.. Ribbing matches the RSD Nostalgia Cover Line. FEATURES • Lift bars 2-1/4” • Allows use of Flat-Out Drag Bars on stock HD Softail Gas Tank • 1/2-13 Mounting hardware included • Mounts between risers and triple clamp
MOTO RISERS FITMENT
FINISH
HD 1.5”
BLACK
0208-2030-B
PART #
HD 1.5”
CHROME
0208-2030-CH
FLAT-OUT RISERS FITMENT
FINISH
PART #
HD SOFTAIL
BLACK
0208-2033-B
HD SOFTAIL
CHROME
0208-2033-CH
1” GLIDER ROAD GLIDE HANDLEBARS
FITMENT
FINISH
PART #
BLACK
0173-1833-BP
0173-1831-CH
1986-2007 FLHT/FLHX
CHROME
0173-1833-CH
0173-1842-BP
2008 and up FLHT/FLHX
BLACK
0173-1843-BP
0173-1842-CH
2008 and up FLHT/FLHX
CHROME
0173-1843-CH
FINISH
PART #
1998-2007 FLTR
BLACK
0173-1831-BP
1998-2007 FLTR
CHROME
2008 and up FLTR 2008 and up FLTR
BLACK CHROME
1” LAZY BOY FL HANDLEBARS 1986-2007 FLHT/FLHX
FITMENT
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
589
GAS CAPS TRACKER
TECH
GEARDRIVE
CAFE
BOTT BO BOTTOM VIEW
GAS CAPS, DUMMY CAPS & LED FUEL INDICATOR CAPS If you purchased your RSD air cleaner prior to 2010 and notice any oil dripping from the bottom filter element, this FREE kit cleans up the pesky problem. We have found that some engines make excessive crankcase pressure causing them to spew a bit more oil than others up through the breathers. This retrofit consists of slotted-head breather bolts and injection molded rubber tubes that fit securely into the backing plate of your existing air cleaner. These parts help route any oil coming out of your breathers right back into your engine without spilling a drop.
LED CAP
DUMMY CAP
GAS CAP
GAS CAP FITMENT LATE 1996 and up HD MODELS
CAFE BO
CAFE CC
0210-2004-SMB
0210-2004-BM
CAFE CH 0210-2004-CH
GEAR DRIVE BO
GEAR DRIVE CC
GEAR DRIVE CH
TECH BO
0210-2006-SMB
0210-2006-BM
0210-2006-CH
0210-2005-SMB
TECH CC
TECH CH
TRACKER BO
TRACKER CC
TRACKER CH
VINTAGE BO
VINTAGE CC
VINTAGE CH
0210-2005-BM
0210-2005-CH
0210-2007-SMB
0210-2007-BM
0210-2007-CH
0210-2018-SMB
0173-1805-BM
0173-1805-CH
DUMMY CAP FITMENT
TECH CC 0210-2010-BM
CAFE BO
CAFE CC
0210-2008-SMB
0210-2008-BM
TECH CH
TRACKER BO
TRACKER CC
0210-2010-CH
0210-2011-SMB
0210-2011-BM
LATE 1996 and up HD MODELS
CAFE CH
GEAR DRIVE BO
GEAR DRIVE CC
GEAR DRIVE CH
TECH BO
0210-2009-SMB
0210-2009-BM
0210-2009-CH
0210-2010-SMB
TRACKER CH
VINTAGE BO
VINTAGE CC
VINTAGE CH
0210-2011-CH
0210-2009-SMB
0210-2012-BM
0210-2012-CH
0210-2008-CH
LED FUEL INDICATOR CAP FITMENT 1992 and up HD MODELS
590
CAFE BO
CAFE CC
0210-2013-SMB
0210-2013-BM
TECH CC
TECH CH
TRACKER BO
TRACKER CC
0210-2015-BM
0210-2015-CH
0210-2016-SMB
0210-2016-BM
CAFE CH 0210-2013-CH
TRACKER CH 0210-2016-CH
GEAR DRIVE BO
GEAR DRIVE CC
GEAR DRIVE CH
TECH BO
0210-2014-SMB
0210-2014-BM
0210-2014-CH
0210-2015-SMB
VINTAGE BO 0210-2017-SMB
VINTAGE CC
VINTAGE CH
0210-2017-BM
0210-2017-CH
GAS CAP FEATURES • Direct replacement screw-in vented gas cap to replace the stock gas cap
DUMMY CAP FEATURES • Direct replacement snap-in cap to replace the left side OEM fuel gauge • Design matched to RSD Gas Cap Line
LED INDICATOR CAP FEATURES • Direct replacement snap-in cap to replace the left side OEM fuel gauge • Low fuel LED light built in • LED user programmable to any pre-set fuel level • Design matched to RSD Gas Cap Line
BAGGER This simple yet effective custom bagger really shows off what the RSD product line can do for your bagger. We threw on an ultra high performance radial mount Marzocchi fork coupled with huge dual discs and the entire line of RSD parts to create a comfortable streetglide that handles every bit as good as it looks. Clean, comfortable and fun to ride. What more can you ask for?
BAGGER WISHLIST PART
FINISH
CLARITY AIR CLEANER
CONTRAST CUT
PART #
CLARITY TIMING COVER
CONTRAST CUT
0940-1057
AVENGER LEVER SET
CONTRAST CUT
0610-0597
1010-1043
CHRONO GRIPS
CONTRAST CUT
0630-1018
FRONT MASTER CYLINDER CAP
CONTRAST CUT
0610-0326
NOSTALGIA ROCKBOX COVERS
CONTRAST CUT
0940-0985
CONVOY HANDLEBARS
BLACK
HANG LO 2-UP SEAT
0601-1268 0801-0510
TRACKER SLIP ON MUFFLERS BY V & H
BLACK
1801-0309
BOSS FRONT WHEEL 21X3.5
CONTRAST CUT
0201-1338
BOSS FRONT ROTOR 13"
CONTRAST CUT
1710-1109
BOSS REAR WHEEL 18X5.5
CONTRAST CUT
0202-1555
BOSS REAR ROTOR 11.8"
CONTRAST CUT
1710-1113
See your local Drag Specialties dealer for pricing and availability. Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
591
VINTAGE KIT The Vintage Softail Conversion Kit is available in individual components to tailor your bike to your unique style and budget. Each group is engineered to fit seamlessly together with minimal effort by you. The result is a dramatic transformation of the standard Softail into a period style bobber that retains the bulk of the OEM bike for an easy to build, easy to insure and easy to ride motorcycle, with minimal fabrication. BEFORE
AFTER
TRACKER REAR FENDER KIT Clean and effective, the RSD Tracker Rear Fender Kit greatly simplifies and lightens the back end of your Softail, in looks and weight. The RSD steel fender struts are first machined then bent to avoid the flat plate look and our rear fender is bobbed for a tight fit to your rear tire. Easy and simple installation takes the guessing out of how to bob your Softail.
200MM STRUTS & FENDER KIT FITMENT FEATURES • Direct bolt-on to HD Softails (Except Rocker) • Struts made from 3/8” thick 1018 Steel and available in Chrome or Black Powder Coat finishes • 9” fender made from 1018 steel and available in raw finish only • Rear fender and struts are available separately for use with many other custom fenders • Quality sheet metal work requires minimal preparation for paint *Requires fender supports to be cut off from stock chassis on 1990-2007 models
592
FINISH
PART #
1990-2007 SOFTAIL W/ 200MM REAR TIRE
BLACK
0215-2002-BP
1990-2007 SOFTAIL W/ 200MM REAR TIRE
CHROME
0215-2002-CH
2008 and up FXST/FLST W/ 200MM REAR TIRE
BLACK
0215-2004-BP
CHROME
0215-2004-CH
2008 and up FXST/FLST W/ 200MM REAR TIRE
200MM STRUTS ONLY FITMENT
FINISH
PART #
1990-2007 SOFTAIL W/ 200MM REAR TIRE
BLACK
0215-2001-BP
1990-2007 SOFTAIL W/ 200MM REAR TIRE
CHROME
0215-2001-CH
2008 and up FXST/FLST W/ 200MM REAR TIRE
BLACK
0215-2003-BP
2008 and up FXST/FLST W/ 200MM REAR TIRE
CHROME
0215-2003-CH
200MM VINTAGE REAR FENDER FITMENT
FINISH
PART #
1990 and up SOFTAIL W/ 200MM REAR TIRE
STEEL
0174-0053
VINTAGE GAS TANK KIT Developed as a timeless bobber-style tank; our Vintage Gas Tank was designed for those who appreciate the past and all its style. Think pin-ups and the girl next door, you get the best of both worlds. FEATURES • Approximately 3 gallon fuel capacity • Available for fuel injected and carbureted Softail models (Fuel Injection Tank includes RSD “Gas It” Kit See Page 67) • Backbone cover hides OEM wiring and relocates your stock ignition switch
• No fabrication required • Accepts RSD Gas Caps, “Late Model” L96-12 Stock Replacement Vented Gas Caps * Not legal for sales or use on pollution controlled vehicles
VINTAGE GAS TANK ONLY
VINTAGE GAS TANK CONVERSION KIT FITMENT
FINISH
PART #
FITMENT
FINISH
PART #
2000-2006 FXST/FLST W/ CARB
STEEL
0173-1844
2000-2006 FXST/FLST W/ CARB
STEEL
0173-1022
VINTAGE GAS TANK W/ GAS-IT FUEL INJECTION KIT FITMENT FINISH PART # 2001 and up FUEL-INJECTED SOFTAIL MODELS
STEEL
0173-1845
BACKBONE COVER ONLY FITMENT
FINISH
2000-2006 FXST/FLST W/ CARB
STEEL
PART # 0173-1093
2008 and up Models require use of 2001-07 OEM Delphi Fuel Injection components
GAS-IT KIT Building a custom tank for your fuel injected Harley? Wondering how to cram all that fuel injection equipment into the tank? With the RSD Gas-It Kit, your stock HD fuel injection parts are removed and relocated inside the tank, allowing a clean, uncluttered tank face, while maintaining the fuel injection we all love so much. FEATURES • Relocates OEM 01-07 Delphi fuel pump, fuel pressure regulator, fuel filter & fuel level sending unit to the underside of your custom tank • A smooth and reliable way to hide all fuel injection components • Includes billet machined steel weld-in plate, 3.75” X 8” aluminum manifold • Same kit that is included with RSD Fuel Injected Gas Tank Kit • Requires vented tank or vented gas cap *Custom fabrication and welding required *Your custom tank’s bottom must be relatively flat to accommodate part installation *Not legal for sale or use on pollution controlled vehicles Softail Delphi Fuel Injected *2008 and up models require use of 2001-07 OEM Delphi Fuel Injection Components
OEM PART#
PRODUCT DESCRIPTION
27408-01
FUEL PRESSURE REGULATOR
61001-01
FUEL FILTER KIT, INCLUDES CLAMPS, O-RING AND HOSE
75300-05
FUEL SENDER KIT
62897-01B
PUMP ASSEMBLY
62189-01A
CHECK VALVE ASSEMBLY WITH O-RING
GAS-IT FUEL INJECTION KIT FITMENT
FINISH
PART #
2001 and up DELPHI FUEL-INJECTED MODELS
STEEL
0173-1837
Gas-It Kit uses existing fuel pump components from your fuel injected Softail. If starting from scratch, you must purchase all of the following components from your local Harley-Davidson dealer for 2001-2007 Delphi systems.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
593
DYNA FIGHTER
594
See your local Drag Specialties dealer for pricing and availability.
MOTOR COVERS We are constantly looking to the past and migrating old designs into the future. Our Nostalgia Cover Line products are a perfect example of that blend and they transform a twincam HD motor into something special. Beautifully machined from Billet Aluminum, we have you covered with three finish options, Chrome, Black Anodize and our newest offering, Contrast Cut, where the covers are hand sanded for a unique handcrafted look.
ROCKER BOX COVERS Designed as a direct replacement for your stock valve cover, sold as a pair.
NOSTALGIA ROCKER BOX COVERS
FEATURES • Laser engraved RSD Logo • Hardware included • Gaskets included
FITMENT
FINISH
PART #
1999 and up TWIN CAM
BLACK ANO
0177-2002-B
1999 and up TWIN CAM
CONTRAST CUT
0177-2018-BH
1999 and up TWIN CAM
CHROME
0177-2002-CH
See your local Drag Specialties dealer for pricing and availability.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
595
NOSTALGIA CAM COVER
CAM COVER Designed as a direct replacement for your stock Timing/Cam cover FEATURES RSD Logo • Lase LLaser a r engraved ase engr engr ngrave ave v dR SD D Log go Hardware •H arddwar w ree included incl incl nc ude udedd •G Gask Gasket asket ask ett included i ludded inc e
FITMENT
FINISH
PART #
2001 and up TWIN CAM
BLACK ANO
0177-2001-B
2001 and up TWIN CAM
CONTRAST CUT
0177-2001-BH
2001 and up TWIN CAM
CHROME
0177-2001-CH
TRANSMISSION COVER Designed as a direct replacement for your stock top transmission cover. • Laser engraved RSD Logo • Chrome Hardware included • Gasket includedd
6 SPEED
5 SPEED
NOSTALGIA 5 SPEED TRANSMISSION TOP COVER FITMENT FINISH
PART #
NOSTALGIA 6 SPEED TRANSMISSION TOP COVER FITMENT
FINISH
PART #
2000-2006 FXST/FLST, 2001-2006 FLHT/R, F
BLACK ANO
0203-2003-B
2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA
BLACK ANO
0203-2001-B
2000-2006 FXST/FLST, 2001-2006 FLHT/R, F
CONTRAST CUT
0203-2003-BH
2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA
CONTRAST CUT
0203-2002-BH
2000-2006 FXST/FLST, 2001-2006 FLHT/R, F
CHROME
0203-2003-CH
2007 and up SOFTAILS / 2007 and up TOURING & 2006 and up DYNA
CHROME
0203-2001-CH
596
IGNITION/POINTS COVER Designed as a direct replacement for your stock timing cover. *Not compatible with Nostalgia Timing Cover Part # 0177-2001-CH, 0177-2001-B & 0177-2001-BH
DERBY COVER Designed as a direct replacement for your stock derby cover on your OEM primary. *2006 Dyna and all 2007 and up applications gasket.t. ap ppl plicattio ions n require requi uire ree the h uuse se ooff a ga gasket
SPPEC ECTI TIION CCOVER OVER INSPECTION Designed as a direct replacement for your chain tension inspection cover on your OEM primary. FEATURES • Laser engraved RSD Logo • Chrome hardware included • Gaskets included
NOSTALGIA INSPECTION COVER FITMENT
FINISH
PART #
1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG
BLACK ANO
0177-2014-B
1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG
CONTRAST CUT
0177-2014-BH
1970-2006 FX/FL, FXST/FLST, FXWG & 1993-2005 FXDWG
CHROME
0177-2014-CH
NOSTALGIA DERBY COVER
NOSTALGIA IGNITION COVER
FITMENT
FINISH
PART #
1999 and up TWIN CAM (5-HOLE)
BLACK
0177-2011-B
1999 and up TWIN CAM (5-HOLE)
BLACK ANO
0177-2013-B
1999 and up TWIN CAM (5-HOLE)
CONTRAST CUT
0177-2011-BH
1999 and up TWIN CAM (5-HOLE)
CONTRAST CUT
0177-2013-BH
1999 and up TWIN CAM (5-HOLE)
CHROME
0177-2011-CH
1999 and up TWIN CAM (5-HOLE)
CHROME
0177-2013-CH
0177-2009-B
1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)
BLACK ANO
0177-2012-B
1970-1998 BIG TWIN (3-HOLE)
BLACK
FITMENT
FINISH
PART #
1970-1998 BIG TWIN (3-HOLE)
CONTRAST CUT
0177-2009-BH
1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)
CONTRAST CUT
0177-2012-BH
1970-1998 BIG TWIN (3-HOLE)
CHROME
0177-2009-CH
1970-1999 BIG TWIN - EXCEPT TWIN CAM, 2004 and up XL (2-HOLE)
CHROME
0177-2012-CH
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
597
HANDCRAFTED At RSD we still believe in hand fabricated, made in the USA products. It’s who we are and how we started, one piece at a time, one bike at a time, where every detail counts. All of our stainless and raw steel parts utilize the highest quality material for a true handmade product that gives your machine a hand built feel without the bloody knuckles.
TRACKER BELT GUARDS FITMENT
BLACK OPS
2004 and up XL SPORTSTER
BLACK
2004 and up XL SPORTSTER
CHROME
2007 and up SOFTAIL
BLACK OPS
2007 and up SOFTAIL
BLACK
FITMENT
598
FINISH
2004 and up XL SPORTSTER
FINISH
PART # 0217-2002-TBP 0217-2002-BP 0217-2002-CH 0217-2003-TBP
TRACKER BELT GUARDS RSD belt guards are a high quality, aesthetic addition to an area often ignored on the bike. Featuring a unique drill and slot pattern on the top and a drilled pattern on the side that lightens up the belt area and gives a touch of flair.
0217-2003-BP
PART #
2007 and up SOFTAIL
CHROME
0217-2003-CH
2007 and up DYNA
BLACK OPS
0217-2004-TBP
2007 and up DYNA
BLACK
0217-2004-BP
2007 and up DYNA
CHROME
0217-2004-CH
FEATURES • Simple bolt on installation • Compliments additional RSD Tracker products • Black guard features gloss black finish w/ brass badge • Black Ops features textured finish w/ satin black badge
NARROWGLIDE FORK BRACE Simplification in the name of function is what our fork brace is all about. It allows you to get rid of the front fender without losing the integrity of the suspension. Eliminates fork twist and increases rigidity from stock while looking damn good. FEATURES • Replaces front fender on narrowglide forks • Laser cut from 3/16” 1018 steel • Practically eliminates front fork flex • For use with a 19” or 21” front wheel/tire • Hardware included • Chrome has a Chrome hoop with a Brass RSD logo badge • Black powder-coat has a gloss black hoop with Brass RSD logo badge • Black Ops has a texture black hoop with gloss Black RSD logo badge *Not designed for use with front fender
WIDEGLIDE FORK BRACE When the front fender is removed from the stock forks it may look good but you end up with a “flexy flyer” that twists and sways more than a drunken sailor. We found this out when we started putting wide, 21” wheels on our Softails. Bring the performance back by keeping your front wheel going in the direction you point it. FEATURES • Replaces front fender on Softails or Wideglide forks • Laser cut from 3/16” 1018 steel • Practically eliminates front fork flex • For use with up to a 21” x 3.5” front wheel/tire • Hardware included • Chrome has a Chrome hoop with a Brass RSD logo badge • Black powder-coat has a gloss black hoop with Brass RSD logo badge • Black Ops has a texture black hoop with gloss Black RSD logo badge *Not designed for use with front fender
TRACKER NARROWGLIDE FRONT FORK BRACE
TRACKER WIDEGLIDE FRONT FORK BRACE FITMENT
FINISH
PART #
1988 and up XL, 1988-2005 FXR/FXD
BLACK
0208-2034-BP
1984 and up FXST/FLST, 1993-05 FXDWG
BLACK
0208-2029-BP
1988 and up XL, 1988-2005 FXR/FXD
BLACK OPS
0208-2034-TBP
1984 and up FXST/FLST, 1993-05 FXDWG
BLACK OPS
0208-2029-TBP
1988 and up XL, 1988-2005 FXR/FXD
CHROME
0208-2034-CH
1984 and up FXST/FLST, 1993-05 FXDWG
CHROME
0208-2034-CH
FITMENT
FINISH
PART #
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
599
HEADLIGHT BRACKET Used for Springer front-end applications, this handcrafted, polished stainless steel bracket relocates your headlight to the bottom of the shock. Shine more light on the road and give your Springer a streamlined look with added adjustability. FEATURES • Mounts to stock or custom applications • Polished stainless steel • Wide range of adjustability • Chrome mounting hardware included * OEM headlight may require spacing
TAG BRACKET This handcrafted, steel bracket is designed to bolt directly to the OEM passenger foot peg hole and vertically mount your license plate. The dual circuit LED light works tailil aand light. tail-light housing and beehive rkss as bboth rk othh ta ot tai nd bbrake rake lig rake ighht. Th TThee ririflfled tai aill liligh ghtt ho hous u ingg an nd be beeh ehhiv shaped lens give you a classic hot rod style. FEATURES • Main bracket made from 3/16˝ laserr ccut u 101 ut 10188 stee ssteel teell te • LED dual circuit tail/brake light • Billet aluminum tail-light housing and nd retainer retaine re etainer ring ring ng • Laser engraved with RSD logo • Billet aluminum license plate frame • Red poly carbonate taillight lens • Chrome hardware included *Not legal in some states *Light does not meet DOT approval *Easily adaptable to most custom bikes ess
TOP MOTOR MOUNT We offer this made in the USA handcrafted, beautifully polished stainless steel bracket in two configurations; one to retain the stock placement of your ignition coil and the other to relocate the coil to the top of the motor mount.
SOFTAIL CUSTOM M W/ COIL RELOCATION ATTION
• Direct replacement for stock mount • Polished stainless steel construction • Billet coil bracket included with coil relocation motor mount • Spark plug wires required for use of motor mount with coil relocation • All chrome mounting hardware included
COIL BRACKET (FOR USE WITH STOCK TANK)
SOF OFTAI T L STOCK TA STOC TO K SOFTAIL REPLACEMENT VERSION REPLAC REP LAC A EME EM NTT VER VERSIO SIONN SI
DYNA STOCK REPLACEMENT
SPORTSTER COIL IGNITION RE-LOCATOR Our Polished Stainless Steel Coil Ignition Re-locator moves the location of coil and ignition switch from under the neck of your Sportster to between the V of your motor and removes the plastic wire caddy to expose the frame of your bike above the front cylinder. • Relocates location of coil and ignition switch • Allows removal of plastic Wire Harness Caddy (OE part # 70642-07) • Polished stainless steel construction • New spark plug wires required for use * Horn must be relocated
NOSTALGIA HEADLIGHT RELOCATION BRACKET
NOSTALGIA TOP MOTOR MOUNT FITMENT
FINISH
2000 and up SOFTAIL -EXCEPT FXS,FX/W/C
POLISHED
0205-2007
2000 and up TWIN CAM SOFTAIL W/ COIL RELOCATION -EXCEPT FXS,FX/W/C
POLISHED
0205-2000
2004 and up DYNA
POLISHED
600
PART #
0205-2010
TRACKER TAG BRACKET
FITMENT
FINISH
HD SPRINGER MODELS
POLISHED
PART # 0207-2000
IGNITION COIL RELOCATOR
FITMENT
FINISH
PART #
2000 and up FXST/FLST (EXCEPT FXSTD)
BLACK
0215-2000-BP
FITMENT
FINISH
PART #
2000 and up FXST/FLST (EXCEPT FXSTD)
CHROME
0215-2000-CH
2007 and up XL w/ 3.3 GAL TANK
POLISHED
0207-2009
APPAREL It’s not all welders and hammers at RSD. We took some time out of the shop to throw down a few new Tshirt designs for both the men and the ladies. Our 145 Gram, 100% cotton T’s are and printed with care and comfort in mind. For the full RSD line of soft goods and leather please visit rolandsands.com.
MENS
WOMEN’S
BLACK BLOCK
BLACK/GREY BADGE
RED BLOCK
BLACK/GREY
RSD LOGO
WING
NAVY
RIBBED
See your local Drag Specialties dealer for pricing and availability.
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
601
2-UP SEAT DYNA • AVENGER Our new Avenger pattern features raised padding with a perforated cover, sewn and formed in just the right places for a comfortable seat. The detailing of the perforated sections add the right amount of style to make it unique yet not overdone.
FITMENT: 2006 AND UP DYNA BLACK: M76696
2-UP SEAT DYNA • ENZO Inspired by high performance automobiles and fine leather craftsmanship of the old world, the Enzo seat in distressed black gives you a high level of detail that blends in as well as it stands out. Our shaped foam center part line adds an extra level of comfort on long rides while keeping it classic.
FITMENT: 2006 AND UP DYNA BLACK: M76902 • BROWN & BLACK: M76901
2-UP SEAT DYNA • BOSS Our inspiration for the Boss seat was born on the runway and pays homage to the art of high endd upholstery. en upho up h ls ho lste stery teery ry.. This Thiss is is not n just j another diamond seat as is evident in the painfully detailed triple stitch stit st ititch ch sew seww lines lin i es e and and raised rai a seed perforated p rfrfor pe orat or ated at ed ddiamond iamo ia mond ndd ppattern attte t rn coupled with our unique distressed vinyl.
Be the Boss.
FITMENT: F TM FI T ENNT:: 2006 200 0066 AND ANND UP DDYNA YNNA BLACK: M76698 BLL ACCK: M 7669 76 6988 69
• ENZO SOLO SO LOO SEAT SEA EAT SPORTSTER SP FITMENT: FIITM TMEN ENT: EN T: 22004 0044 AND UP SPORTSTERS 00 BLACK: M76903 BLAC BL ACK: AC K M K: 77690 690 • BROWN & BLACK: M76907
FITMENT: 2008 AND UP FL TOURING F TTM FI BLACK: BLAAACC M76904 • BROWN & BLACK: M76905 BL
M
US
TS
M AN
CT U R E D FA BY
U
2-UP 2-UUUP SEAT FL • ENZO 2-
TANG SEA
SOLO SEAT 200MM TYRE SOFTAIL • BOSS FITMENT: 2006 AND UP SOFTAILS WITH 200MM TYRE BLACK: M76906
SOLO SOOLO SEAT SPORTSTER • BOSS FITMENT: FIITM TMEN ENN 2004 AND UP SPORTSTERS BLL ACK ACCK M76908 BLACK:
602
SLANT 2 INTO 1 EXHAUST SYSTEM • STAINLESS The newest collaboration between RSD/Vance and Hines brings you high performance exhaust in a light weight package. We’ve stripped our newest exhaust system to only the necessary elements, exposed the weld for a Works style appearance and added a slash cut carbon and stainless tip for style points as well as performance. We’ve also done all we could to tuck the system up tight to the bike for ground clearance allowing usage of standard sporty mid controls and rear ear sets. s. FEATURES • All Stainless Steel construction with Carbon Fiber End Cap. • Brush Finish • Tig Welded w/ 18mm O2 sensor bungs (O2 plugs not included – available as accessory).
PARTT #: 11807
SLANT 2 INTO 1 EXHAUST SYSTEM • CARBON OPS The newest collaboration between RSD/Vance and Hines brings you high ghh performance exhaust in a light weight Gloss Carbon and Satin Black wee call Carbon Ops. We’ve stripped our newest exhaust system to only thee necessary elements, dipped it in Black Ceramic for a tough finish and added a slash cut carbon and stainless tip for style points as well as performance. We’ve also done all we could to tuck the system up tight to the bike for ground clearance allowing usage of standard sporty midd controls and rear sets. FEATURES • All Stainless Steel construction with Carbon Fiber End Cap. • Black Hi Temp Ceramic Finish • Tig Welded w/ 18mm O2 sensor bungs (O2 plugs not included – available as accessory). y) PART #: 41807 07
FITMENT: 2004 and up HD Sportster models with standard mid controls or RSD rear sets only (Does not fit stock forward controls)
OPTIONAL DB KILLER SOUND INSERT Designed to take your RSD Slant 2 into 1 Exhaust System down a notch or two. This optional dB Killer insert is simple to install and drops the sound level typically 2-4 dB’s.
PART #: 26531
SLANT 2 INTO 1 EXHAUST SYSTEM • CARBON OPS This is the ultimate High Performance intake from RSD. We’ve combined the best in performance and light weight with an ergo friendly slanted carbon fiber intake filter from K&N. Our new Slant Filter element gives more knee clearance and a slanted surface that’s easy on the body during hard riding. The Filter element is coupled with our newest backing plate shape from Vance and Hines for industry leading filtration in a simple package. FEATURES • Laser Etched Black Anodized Cover • Black Anodized Backing Plate and Mounting Hardware • Carbon Fiber Ergo Trimmed K&N Filter • Powder Coated Inlet Adaptor
PART #: 30015
Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu
603
VENTURI AIR CLEANER - NOSTALGIA FITMENT: ’91-UP, XL SPORTSTER PART #: 0206-2070-CH • 0206-2070-BH • 0206-2070-SMB FITMENT: ’93-UP, TWIN-CAM EVO PART #: 0206-2071-BH • 0206-2071-CH • 0206-2071-SMB
REAR MASTER CYLINDER CAP - CAFE FITMENT: ’04-UP, XL PART #: 0208-2066-BM • 0208-2066-CH • 0208-2066-SMB
RRISER RI RISE ISSEER PL PPLUG U SET UG SETT PART #: 0208-2060-CH 0208-2060-BM 0208-2060-SMB
FITMENT: ’08-UP, FL/FLHT PART #: 0206-2072-BH • 0206-2072-CH • 0206-2072-SMB FITMENT: ’93-’06, BIG TWIN WITH S&S E/G CARB 3 B • 0206-2073-CH 3733 -C • 0206-2073-SMB S SM PART #: 0206-2073-BH
FORK PRE-LOAD ADJUSTER REAR MASTER CYLINDER CAP - NOSTALGIA FITMENT: ’04-UP, XL PART #: 0208-2076-BM -207 -2 0766 BM M • 00208-2076-CH 20088-20 2076 766 -C -CHH • 02 00208-2076-SMB 08-2 08 -22076076 SM MB
FRONT FR FRON RON ONTT MASTER ER CCYLINDER YL CAP AP - NO NNOSTALGIA S FITMENT: ’96-’03 XL, ’96-’08 FXD/ST, ’96-’04 FL PART #: 0208-2072-BH • 0208-2072-CH • 0208-2072-SMB FITMENT: ’96-’03 XL, ’05-’07 FL, ’06-’10 FXD PART #: 0208-2073-BH • 0208-2073-CH • 0208-2073-SMB
FITMENT: 39MM PART #: 0208-2061-BM 0208-2061-CH 0208-2061-SMB FITMENT: 49MM PART #: 0208-2062-BM 0208-2062-CH 0208-2062-SMB
FITMENT: ’08-’10 FL PART #: 0208-2074-BH • 0208-2074-CH • 0208-2074-SMB FITMENT: ’04- ’10 XL SPORTSTER PART #: 0208-2075-BH • 0208-2075-CH • 0208-2075-SMB
STEERING STEM NUT TAG BRACKET FITMENT: ’86-UP, FXST, PASSENGER PEG MOUNT PART #: 0215-2005-BP • 0215-2005-CH • 0215-2005-TBP FITMENT: HORIZONTAL, CUSTOM APPS. , FENDER MOUNT PART #: 0215-2006-BP • 0215-2006-CH • 0215-2006-TBP FITMENT: HORIZONTAL ’86-UP, XL SPORTSTER, SHOCK MOUNT PART #: 0215-2007-BP • 0215-2007-CH • 0215-2007-TBP FITMENT: VERTICAL ’86-UP, XL SPORTSTER, SHOCK MOUNT PART #: 0215-2008-BP • 0215-2008-CH • 0215-2008-TBP
CABLE CLUTCH CLUT CL UTCH UT C COVER CH COV O ERR - CCLARITY LARI LA RITY RI TYY FITMENT: ’07-UP, FXST, ’06-UP, FL & FXD PART #: 0177-2022-BM • 0177-2022-CH • 0177-2022-SMB FITMENT: ’87-’06 BIG TWIN PART #: 0177-2031-BM • 0177-2031-CH • 0177-2031-SMB
vailable
image not a
CABLE CLUTCH COVER - NOSTALGIA please note ALL NEW PRODUCTS SHOWN ARE AVAILABLE IN
CHROME (CH) • BLACK OPS (SMB)(TBP) CONTRAST CUT (BM)(BH)
604
FITMENT: ’07-Up, FXST, ’06-Up, FL + FXD 6 Speed PART #: 0177-2025-B • 0177-2025-BH • 0177-2025-CH 0177-2025-SMB FITMENT: ’87-’06 Big Twin 5-Speed PART #: 0177-2032-CH • 0177-2032-SMB
FITMENT: ’06-UP, FXST + WE, ’08-’11 FXCW PART #: 0208-2063-BM 0208-2063-CH 0208-2063-SMB FITMENT: ’89-UP, FLST,’87-’09, FXR, FXD, XLWE PART #: 0208-2063-BM 0208-2063-CH 0208-2063-SMB FITMENT: 2010-UP, XL NARROW GLIDE PART #: 0208-2065-BM 0208-2065-CH 0208-2065-SMB