Kuryakyn Harley-Davidson by MAG Europe

H A R L E Y- D A V I D S O N

INJECTION MOLDED SADDLEBAG SPEAKER LIDS WITH

6”X9” KICKER SPEAKERS

Patent Pending

The wizards at Küryakyn & Kicker have come up with a replacement saddlebag lid that will have your bagger rockin’ like never before! Featuring high-tech, marine-grade 6” x 9” Kicker Speakers with separate mounted 3/4” tweeters & a dependable high pass cross-over for unbelievable sound. Chrome or Black waterproof speaker grills come on a black finish that’s fully paintable - or add our Saddlebag Lid Covers (P/N K4117) for undeniable style. Speakers are covered with FrogzSkin (Patent Pending) a protective screen designed to keep out water & debris & will not interfere with the quality of sound. These Saddlebag Lids are for riders who demand the ultimate in looks & function without sacrificing much storage.

K873

K878 Note: Supplied base fi nish unpainted.

• Power Handling (Peak/RMS): 300W/100W • Frequency Response: 40Hz-5kHz See www.kuryakyn.com for Additional Information Fits: See Fitment Chart - pg 78

K873 Chrome Grill - Injection Molded Saddlebag

Lids with 6”x9” Speaker & 3/4” Tweeters (pr)

K878 Black Grill - Injection Molded Saddlebag

Lids with 6”x9” Speaker & 3/4” Tweeters (pr)

Note: May work with other amplifier & Speaker combinations but additional wiring may be needed. Also fits Fairing Factory Saddlebags (P/N’s K5396 & K5397 - pg 233). Note: 871 Amplifier & Harness recommended for superior sound. Easy plug & play installation.

COVERS FOR INJECTION MOLDED SADDLEBAG SPEAKER LIDS Patent Pending If you’re looking to add our Injection Molded Saddlebag Speaker Lids (P/N K873 & K878) & you’re worried they won’t match your paint job or you simply want to protect your investment from boot scuffs & wear - these are the covers for you. The stylish design stretches right over the top of each saddlebag lid creating a unique look that looks great with any color bike. Each cover features cut outs for speakers & tweeters to ensure no sound loss while providing the utmost protection. Made from soft, matte finished black vinyl with a felt interior. Fits: Designed to work with Küryakyn Injection Molded Saddlebag Lids with 6”x 9” Kicker Speakers (P/N K873 & K878)

K4117 Covers for Küryakyn Saddlebag Lids with 6”x9” Speakers (pr)

FAIRING LOWER SPEAKERS

Patent Pending

Make good use of those fairing lowers by adding the best speakers around! Kicker KPS5250 2 ohm or KPS5250 4 ohm Speakers (refer to pg 79 or website for speaker specs & impedance options) mounted in gloss black housings wrapped in Küryakyn Chrome - The ultimate blend of amazing sound & great looks! Speakers are angled towards the rider for optimum sound quality & will accept any of our Speaker Grills. Kicker Amplifier & Wiring Harness (P/N K871) required for installation (sold separately - Below). Fits: See Fitment Chart - pg 78

K877 2-ohm Fairing Lower Speakers (pr) K879 4-ohm Fairing Lower Speakers (pr) Note: May work with other amplifier & Speaker combinations but additional wiring may be needed.

K877

A D D ANY O F O U R STY LIS H S P E A KE R G RI LLS FO R A

Shown with P/N K3788 Flame Speaker Grills - Sold Separately

C U STO M I Z E D LO O K !

KICKER® AUDIO AMP The wizards at Küryakyn & Kicker have created the ultimate 5-channel motorcycle audio amplifier. 4 channels of full range power plus 100 watts of subwoofer power! Rather than spraying a little car audio amp with some waterproofing goop like the other guys, they started with a clean sheet of paper on this one. DSP, (digital Signal Processing) provides superior performance when compared to simple car stereo amps. DSP allows the amp to be tuned exactly to the riding environment with equalization, frequency response, & compression all set precisely for rocking on the road. High power combined with low current draw delivers powerful efficient performance without sucking your charging system dry. Featuring an ultra slim, compact design, the amp connects to & mounts inside your fairing. You get to keep the factory radio & its handlebar controls; no need to change out radios! Specially designed & optimized for Kicker Speakers. • Power Output: 46 w/ch. X 4 @ 2 ohms, + 100 W @ 1 ohm • Max Current Draw: 26 Amps at 13.8 Vdc • Typical continuous current draw

• Plug & Play wiring included to accommodate for speakers in stock locations. All other Küryakyn speaker kits have wiring to adapt to the 871 harness kits. Designed specifically for use with P/N’s 872-875 & 877

Fits: ’06 and up Electra Glides, Road Glides, Street Glide, & Trikes (except ‘11 and up FLHXSE & ‘11 FLTRUSE, & ‘12 and up FLTRXSE)

K871 Kicker 4.1 DSP Amplifier (ea)

Note: Will not work with Medallion Gauges on Batwing fairing bikes.

KICKER® SUBWOOFER

KICKER® MONO SUBWOOFER AMP

WITH MOUNT FOR SADDLEBAG

Finally a subwoofer solution designed to drop into your left saddlebag turning it into a stealthy enclosure to produce big bass that’ll have everyone wondering what’s inside.

K888

FEATURES

• 6 ½” diameter, 1 Ohm

• 200 X 1 Into ½-Ohm Load

• 150 Watts Rms Power Handling

• 15 Amps Max Current Draw

• Mounting Depth Under 3 Inches

• 40-250 Hz Frequency Response

• Injection-Molded, Modified-Spoke Cone for Max Excursion • 360° Cone Bracing; Ribbed Santoprene Surround

Big power with a tiny footprint! Direct amplification technology for better than 85% efficiency. Designed to power the Kicker Subwoofer (P/N 888) for optimum sound output mounting directly on top of the enclosure.

K886

• Selectable Low-Pass Crossover; 100 Hz & 250 Hz, 40 Hz Hi-Pass

• Easily Removable - Fits In Left Side Saddlebag

• Dual Input Sensitivities & Variable Gain

Fits: Left side saddlebag on ’06-’11 Electra Glides, Road Glides, & Street Glides (except ’09-’11 FLHTCUTG, ’10-’11 FLHXXX, ’06-’09 FLHT Standard, ’11 FLHXSE, ’11 FLTRUSE)

• Bass Boost, 6Db At 60 Hz

K888 Kicker Subwoofer with Mount (ea) Requires Amp (P/N K871) or Subwoofer Amp (P/N K886) for installation. Plugs directly into P/N K871.

• Selectable Turn On Fits: ’96 and up Electra Glides, Road Glides, & Street Glide

K886 Kicker Mono Subwoofer Amp (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

SADDLEBAG LID SPEAKER PODS

Patent Pending

Introducing the most cost effective rear speaker conversion for your modern bagger. By utilizing the factory saddlebag lids, these speakers will literally transform your bags into the ultimate sound system! Kicker’s powerful KPS5250 2 or 4 ohm Speakers (refer to pg 79 or website for speaker specs) are wrapped in high quality Küryakyn chrome & are angled towards the rider & feature a water-proof design for optimum sound quality & durability. Kicker Amplifier & Wiring Harness (P/N K871) required for installation (sold separately - pg 77). Fits: See Fitment Chart - Below

K872 2 ohm Saddlebag Lid Speaker Pods with 5 ¼” Speakers (pr)

K868 4 ohm Saddlebag Lid Speaker Pods with 5 ¼” Speakers (pr)

Note: Requires cutting speaker hole in saddlebag lid. Storage space is not compromised. Note: May work with other amplifier & Speaker combinations with additional wiring (sold separately). Shown with P/N K3793 Deco Speaker Grill Shown - Sold Separately

A D D ANY O F O U R STY LIS H FRO NT S P E A KE R G R I L L S F O R A T R U LY U N F O R G E T T A B L E L O O K !

2-ohm2 Saddlebag Lid Speaker Pods

4-ohm2 Saddlebag Lid Speaker Pods

P/N K872

P/N K868

Injection Molded Saddlebag Speaker Lids P/N K873 & K878

’96-'05 Electra Glides & Road Glides

4-ohm2 Kicker KPS5250 Speakers

2-ohm2 Kicker KPS5250 Speakers

2-ohm2 Fairing Lower Speakers

4-ohm2 Fairing Lower Speakers

P/N K874

P/N K875

P/N K877

P/N K879

Subwoofer 3

Subwoofer Amp

P/N K888

P/N K886

’06 & up Street Glides & Road Glides, & Electra Glide Classic (except ‘10 & up FLHXSE, ‘09 FLTRSE, ‘11 FLTRUSE, ‘10-’11 FLHXXX, ‘06-’09 FLHT Standard, & ‘12 & up FLTRXSE)

’06 & up Electra Glide Ultra Limited, Ultra Classic Electra Glide, Road Glide Ultra (except ‘06 & up FLHTCUSE, ‘11 FLTRUSE, & ‘09 & up FLHTCUTG)

’06-'10 Screamin’ Eagle Ultra Classic Electra Glides4

’09-'10 Screamin’ Eagle Street Glide & Road Glide

’09 & up Tri Glide Ultra Classic

’10-'11 Street x x x1 x1 Glide Trike 1 Requires H-D Vented Accessory Fairing Lowers (P/N K58854-****) [P/N is dependent on color code. Refer to H-D dealer]. 2 Refer to website to determine what ohm version will fit your application. 3 Kicker Amp (P/N K871) or Subwoofer Amp (P/N K886) required for installation. 4 Installation of any Kicker Speakers will require additional wiring (Not included).

Kicker Amp/ Wiring P/N K871

NEVER BEFORE HAS A REPLACEMENT SPEAKER SOUNDED SO GOOD!

KICKER® KPS5250 SPEAKER UPGRADE We don’t simply use car audio speakers with a new sticker & call them bike speakers. These are the real deal & once you put them in you’ll be blown away. These speakers are weather-proof & feature high-efficiency coaxials specifically created as fairing drop-ins or rear speaker replacement on ’96 & newer Harley touring motorcycles. Extremely powerful, these 2 & 4 ohm speakers are lighter than anything on the market due to their rare-earth neodymium motors! The 3/4” dome tweeters are designed for efficiency & performance & the midrange drivers are totally sealed for greater cone area & higher Sound Pressure Levels. Leave the dull sounding, heavy speakers in the dark ages! SPEAKER SPECS

• Woofer: 5.25” • Tweeter: 3/4” • Power Handling (Peak/RMS): 100W/50W • Weight: 12.6 oz See www.kuryakyn.com for Additional Information

K875 2 ohm Kicker KPS5250 Speakers (kit)

Fits: ‘06-’11 Electra Glides, Road Glides, Street Glides, & Trikes (except ‘11 FLHXSE & ‘11 FLTRUSE)

K874 4 ohm Kicker KPS52504 Speakers (kit)

Fits: ‘96-’05 Electra Glides, Road Glides, & Street Glides

K I C K E R A U D I O P E R F O R M A N C E PA C K A G E S P L AT I N U M

GOLD

S I LV E R

BRONZE

= SPEAKER

PLATINUM: 10 SPEAKERS

GOLD: 8 SPEAKERS

8 KICKER SPEAKERS - AUDIO AMP - TWEETER PODS • Kicker Speakers (x2): K875 or K874 (2 or 4 ohm) • Tweeter Dash Pods: K881 or K882 (Chrome or Black) • Fairing Lower Speakers: K877 • Saddlebag Lid Pods or Molded Saddlebag Lids: K872, K873 or K878 • Kicker Audio Amp: K871

6 KICKER SPEAKERS - AUDIO AMP - TWEETER PODS • Kicker Speakers (x2): K875 or K874 (2 or 4 ohm) • Tweeter Dash Pods: K881 or K882 (Chrome or Black) • Fairing Lower Speakers: K877 • Kicker Audio Amp: K871

SILVER: 6 SPEAKERS

BRONZE: 4 SPEAKERS

4 KICKER SPEAKERS - AUDIO AMP - TWEETER PODS • Kicker Speakers (x2): K875 or K874 (2 or 4 ohm) • Tweeter Dash Pods: K881 or K882 (Chrome or Black) • Kicker Audio Amp: K871

2 KICKER SPEAKERS - AUDIO AMP - TWEETER PODS • Kicker Speakers: K875 or K874 (2 or 4 ohm) • Tweeter Dash Pods: K881 or K882 (Chrome or Black) • Kicker Audio Amp: K871

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

BETTER LOOKS

- FAR BETTER SOUND!

TWEETER DASH PODS

Patent Pending

If you listen to our competitor’s “tweeters” first, your senses will immediately tell you why our new system is light years ahead of last years’ news! FEATURES

• Power Handling (Watts, Peak/RMS): 300w/150w • Frequency Response: 3500Hz-20kHz Fits: ‘98 and up Electra Glide & ‘06 and up Street Glide

K881 Chrome - Tweeter Dash Pods (pr) K882 Gloss Black - Tweeter Dash Pods (pr) K881 K881

K882

THE SOUND OF CHROME™ This system rocks! The 2nd Generation looks, performs, & sounds even better! No compromise here with the perfectly designed 3” main speakers with additional tweeters for full bodied sound. The weatherproof bullet housing has powerful built-in true 50 watt amplifier & includes a volume & on/off control switch. Convenient swivel adjustment gives you the freedom to position speakers in any direction you choose. With a full plug-&-play wiring harness, noise purifier & standard 3.5 mm jack, simply connect your iPod, MP3 player, satellite radio, personal CD player, etc. & ride on.

K852 Chrome

Fits: 1” Handlebars (set)

K851 Chrome

Fits: 1-1/4” Handlebars (set)

K832 Gloss Black

Fits: 1” Handlebars (set)

Note: Not suggested for use with FM/AM radios, as this may cause interference.

GREAT LOOKS WITH AMAZING SOUND!

ANTENNAS K862 K863 K864

DIRECT OEM REPLACEMENT

BILLET ANTENNAS Introducing a billet antenna that’s made for people who actually ride. No more bent or broken antenna studs thanks to the rubber over-molded spring base allowing the antenna to flex if bumped or hit. These 12” antennas pick up AM/FM signals (no CB) & are a direct replacement for OEM. Available in chrome or two-tone finishes; install in just seconds. FLEXIBLE ANTENNA YOU CAN HIDE A L MOST ANYWHERE!

Fits: ’89 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Trikes – AM/FM applications only

K862 Round/Grooved, Two-Tone Black & Raw Aluminum (ea) K863 Round/Grooved, Chrome (ea) K864 Hex/Grooved, Two-Tone Black & Raw Aluminum (ea)

TUNE TRAPPER® HIDDEN ANTENNA

A hidden AM/FM/HD/WB antenna that works! Mount it anywhere (in almost any vehicle, boat, RV or motorcycle) in any position, in steel or fiberglass; it’s flexible, can be bent 10-20 degrees & works great inside H-D fairings! A full 1/2 wave helical dipole antenna, hand tuned to resonance with special instruments & requires no ground. Uses 95% braided shield cable for virtual elimination of EMI electrical noise caused by engines, fans, wipers, etc. These hand-tuned USA-made antennas require no power; your radio has all the preamp it needs built in, it’s just looking for a properly tuned antenna to make it rock. Fits: Electra Glides, Road Glides, Street Glides, & Trikes (Overall length is 2’ with a 2’ cable)

K853 Tune Trapper Hidden Antenna (ea)

DUAL FUNCTION FLEXIBLE ANTENNAS

K865

Big performance cut down to size! Enjoy all the range & clarity your AM, FM & CB radio offer without the mile-high stock antenna. This compact & flexible antenna is only 17” long & two versions are available depending on your bike model & mount. Each comes tuned for its specific mounting location so no calibration is needed. Your bike will look better, loads will strap on easier, & it won’t be in your way! Fits: ’89 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Trikes equipped with AM/FM radio &/ or CB radio kits

CORE SYSTEM FOR IPOD

Connect an iPod® directly to your factory or aftermarket radio & provides video output from compatible iPods (including the iPod Classic, Touch & Nano). Supplies power & charges your iPod. Includes: CORE for iPod, 3.5mm to a/v RCA cable, 3.5mm to 3.5mm cable, cigarette lighter charger, 3 wire power cable for optional hardwire installation Fits: Allows for connection to any factory or aftermarket source unit with RCA or 1/8” (3.5mm) audio inputs using the supplied cables

K876 Soundgate® Core System Package (kit)

KPXI50.2 AMPLIFIED CONTROLLER When a traditional radio simply won’t fit, look no further. The KPXi50.2 takes your iPhone or iPod & turns it into your motorcycle’s stereo while keeping your iPhone or iPod charged. The remote control features big, blue-backlit buttons & multiple mounting options, while providing volume, track & playlist control as well as a random playback option for your music. Built in amplification, (25 watts RMS x 2 @ 2-ohms) gives you the option of adding additional speakers for a complete stereo system for your bike. External amplifiers can also be added for even more power. Fits: Universal for any vehicle with a 12 volt charging system where a traditional head unit will not work Note: Does NOT come with mounting hardware. Requires simple wiring.

K889 KPXi50.2 Amplified Controller for iPod (kit)

K865 Tour-Pak Mount (ea) K866 Frame Mount (ea) WIDE RANGE

- SMALL SIZE

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

PA N A C E A

L . E . D . TA I L L I G H T S Y S T E M

K Ü RY A K Y N ’ S P AT E N T E D P A N A C E A TA I L L I G H T S Y S T E M I S A R E V O L U T I O N A RY P R O D U C T T. C O M P L E T E LY P L U G & P L A Y , T H I S S Y S T E M A L L O W S T H E S T O C K R E A R I N C A N D E S C E N T L I G H T I N G T O B E T R A N S F O R M E D I N T O A B R I L L I A N T M U LT I - F U N C T I O N L . E . D . S Y S T E M .

PA N A C E A

STOCK

RUN

Taillight & Turn Both Signals Illuminate Red

Only the Taillight is Illuminated

TURN

TURN Turn Signal Flashes Amber. Taillight Remains illuminated

Selected Turn Signal Flashes Amber & Amber Arrow Flashes on Appropriate Side of Taillight. Other Turn Signal Remains Illuminated Red

BRAKE

BRAKE Only Taillight Brightens

Taillight & Turn Signals Flash Red 3 Times & then Taillight & Turn Signals Remain Brightly Lit Red Until Brake is Released Turn Signal & Arrow will Continue to Flash Amber During Braking Function if Turn Signal is Activated Note: Flashing function can be disabled via the control module.

HOW TO ORDER:

1 . SELECT A PANACE A TAILLIGHT FOR YOUR SPECIFIC APPLICATION 2 . SELECT THE WIRING COMPONENTS 3 . SELECT PANACE A RE AR TURN SIGNAL INSERTS FOR YOUR SPECIFIC APPLICATION 4. SELECT L.E.D. FRONT TURN SIGNAL CONVERSIONS FOR YOUR SPECIFIC APPLICATION (ADAP TE RS AR E R EQ U I R E D W H E R E LISTE D)

(O PTI O NAL)

PANA C E A LI G HTI N G O R RU N -TU RN B R A K E C O N T RO L L E RS A R E N OT C O M P AT I B L E W I T H H - D A C C E S S O RY O R OT H E R A F TE R M A R K E T M O D U L ES . RE M O VE A LL S U C H M O D U LES B E FO RE I N S TA L L I N G P A N A C E A L I G H T I N G O R RU N -TU RN - B RA KE M O D U LES . LO A D E Q U A L I Z E R S G E N E R AT E H E AT WHEN IN USE SO AVOID USING THE TU RN S I G NA LS FO R AN EXTE N D E D P E R I O D O F T I M E . N E V E R O P E R AT E 4 -WAY FL AS H E RS U N LESS YO U FI RST R E M O V E T H E LO A D EQ U A L I Z E RS .

(PG ??)

I M P O RT A N T I N F O R M A T I O N A B O U T P A N A C E A T A I L L I G H T S : 1. All wiring for trailer lights must be spliced into the wiring harness ahead of the Panacea control module. 2. If the rear of the motorcycle is equipped with any incandescent lights that were not original equipment, such lights must be spliced into the wiring harness ahead of the Panacea control module. Police Models are often equipped with additional lights not found on their civilian counterparts. Be aware that these lights must be rewired, removed, or converted to L.E.D. prior to installing a Panacea system. 3. The Panacea Taillight System meets FMVSS #108 when operated in “DOT Mode”. There is no provision in FMVSS #108 for flashing brake or amber arrows so those features are disabled when operated in “DOT Mode”. 4. Panacea Taillights can be used on ’97-’01 Dynas, ’96-’01 Fat Boy & FXST (except Deuce), & ’99-’01 XL Models, but they must be used with stock turn signals. Panacea Turn Signals are not available for these applications. W H Y U S E P A N A C E A R E A R T U R N S I G N A L I N S E RT S ?

L.E.D. Silver Bullets, stock turn signals, or other custom single filament lights can be used with the Panacea Taillight System but they will function as turn signals only. The Panacea Taillight will retain all of its functions (run, pulse brake, & amber directional arrow). To Realize the Full Benefit of Two-Color, Multi-Function Turn Signals Made Possible by the Panacea System, You Must Use Panacea Rear Turn Signal Inserts.

RED DELUXE

RED DELUXE W/ OUT LICENSE PLATE WINDOW

K5420

K5421

SMOKE DELUXE

SMOKE DELUXE W/OUT LICENSE PLATE WINDOW

RED LOW PROFILE

RED LOW PROFILE W/ OUT LICENSE PLATE WINDOW

SMOKE LOW PROFILE

SMOKE LOW PROFILE W/OUT LICENSE PLATE WINDOW

K5423

K5424

K5425

K5426

K5427

PANACEA TAILLIGHTS U.S. Patent 6,714,128

All ’94-’10 FLST Models** (except ’94-’01 FLSTF, ’05-’10 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC, ‘10 FLSTSE) All ’02-’10 FXST Models (except ’02’07 FXSTD, ’07-’09 FXSTSSE, ’08-’10 FXCW/C) ‘94 and up FLHTC**, FLHTCU**, FLHTK; ‘94-’08 FLHT**; ‘98-’08 FLTR, ‘11 and up FLTRU, ‘94-’08 FLHR**, ‘98 and up FLHRC, ‘04-’07 FLHRS, ‘94-’96 FLTC/U**, ‘00-’01 FLTRSE, ‘02-’03 FLHRSE, ‘04 FLHTCSE, ‘06 and up FLHTCUSE, ‘11 FLTRUSE ’06-’09 FLHX, ’09 FLHT, ‘09 FLTR, ‘09 & up FLHR, ’05 FLHTCSE ’01 FXDX/T & all ’02-’11 Dynas (except ’09-’11 FXDB, ’09-’10 FXDFSE, ‘10-’11 FXDWG) ’02 & up XL***(except ’07 & up XL1200N, ‘10-’12 XL1200X, ‘11 & up XL1200C, ’09 & up XL883N)

*** ‘04 and up Requires 6-Pin to 8-Pin Adapter (P/N K4831) - Sold Separately 6-PIN TO 8-PIN

8-PIN HARDWARE

K4831

K4832 x

WIRING COMPONENTS U.S. Patent 6,714,128

’94-’96 Electra Glides, Tour Glides, Road Kings; ’94-’95 FLSTC & ’94-’95 FLSTN ’04 and up XL Models

** ‘94-’96 Requires 8-Pin Hardwire Adapter (P/N K4832) - Sold Separately

K5422

PANACEA REAR TURN SIGNAL INSERTS

U.S. Patent 6,714,128 Note: Dual circuit.

RED BULLET

SMOKE BULLET

RED FLAT STYLE

SMOKE FLAT STYLE

K5430

K5431

K5428

K5429

K5453

K5454 x

C HROME BEZEL Colored Lens

BLACK BEZEL Colored Lens

’94-’10 FLSTC, ’94-’96 FLSTN, ’06 FLST All ’02-’10 FXST Models (except ’02-’07 FXSTD, ’07-’09 FXSTSSE, ’08-’09 FXCW/C), ’02-’10 FLSTF, ‘10 FLSTFB, ‘08-’10 FLSTSB 94 and up FLHTC, FLHTCU, FLHTK; ‘94-’09 FLHT, ‘98-’03 FLTR, ‘94 and up FLHR, ‘98 and up FLHRC, ‘94-’96 FLTC/U, ‘00-’01 FLTRSE ’06-’09 FLHX, ’04-’09 FLTR, ‘11 and up FLTRU, ’04-’07 FLHRS, ’02’03 FLHRSE, ’04-’05 FLHTCSE, ’06 and up FLHTCUSE, ‘11 FLTRUSE ’01 FXDX/T & all ’02-’11 Dynas (except ’09-’11 FXDB, ’09-’10 FXDFSE, ‘10-’11 FXDWG) ’02 and up XL (except ’07-’12 XL1200N, ‘10 and up XL1200X, ‘11 and up XL1200C, ’09 and up XL883N)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

L.E.D. TAILLIGHTS & TURN SIGNALS L.E.D TAILLIGHT G & REAR TURN SIGNALS

STOCK

FRONT TURN SIGNALS

STOCK

L.E.D. TAILLIGHT CONVERSIONS Taillights function as run-brake just like your stock taillight. Add L.E.D. Turn Signal Conversions & a Run-Turn-Brake Controller (pg 86) for a multi-functional, super bright L.E.D. Rear Lighting Package. Includes connectors for ’99-later & ’98-earlier style taillight bases.

’89 and up FLST/C, ’90 and up FLSTF, '10 and up FLSTFB, ’08-’11 FLSTSB, ’05-’06 FLSTFSE, ’93-’96 FLSTN ’05 and up FLSTN, ’05-’07 FLSTSC, ’07-’08 FLHRSE, ’97-’03 FLSTS All ’89-’10 FXST Models (except ’00’07 FXSTD, ’03-’04 FXSTDSE, ’07-’09 FXSTSSE, ’08-’10 FXCW/C) 88 and up FLHTC, FLHTCU, FLHTK; '91-'08 FLHT, '98-'08 FLTR, '11 and up FLTRU, '98 and up FLHRC, '94-'08 FLHR, ‘04-’07 FLHRS, '91-'93 FLHS, '91-'96 FLTC/U, '00-'01 FLTRSE, '02'03 FLHRSE, '04 FLHTCSE, '06 and up FLHTCUSE, '11 FLTRUSE ’06-’09 FLHX, '09 and up FLHR, ’09 FLTR, '09 FLHT, ’05 FLHTCSE, ‘09 and up FLHTCUTG, ‘10-’11 FLHXXX, ‘12 FLD All ’91 and up Dynas (except ’09 and up FXDB, '09-'10 FXDFSE, '10 and up FXDWG, ‘12 and up FLD) All ’89-’00 FXR All ’89 and up XL (except ’07 and up XL1200N, '10 and up XL1200X, ‘11 and up XL1200C,’09 and up XL883N) FMVSS #108 Compliant (except P/N K5410)

RED DELUXE

RED DELUXE W/OUT LICENSE PLATE WINDOW

SMOKE DELUXE

K5432

K5433

K5434

SMOKE DELUXE RED W/OUT LICENSE PLATE WINDOW LOW PROFILE

K5435

K5436

RED LOW PROFILE W/OUT LICENSE PLATE WINDOW

K5437

SMOKE LOW PROFILE W/OUT LICENSE SMOKE LOW PROFILE PLATE WINDOW TOMBSTONE

K5438

K5439

K5410

x x

S I M P L E P L U G - I N I N S TA L L AT I O N ! W E C A N G I V E YO U T H E E X T R A L I G H T YO U WA N T W I T H O U R ST R A I G H T - FO RWA R D P LU G - I N L . E . D. TA I L L I G H T & T U R N S I G N A L C O N V E R S I O N S . T H E L . E . D . C I R C U I T B O A R D S A R E M O U N T E D I N S I D E O U R S T Y L I Z E D L E N S E S S O A L L Y O U D O I S TA K E O F F Y O U R S T O C K L E N S , R E M O V E T H E B U L B , P L U G O U R C O N N E C T O R I N T O T H E S O C K E T & I N S TA L L O U R L E N S .

AMBER BULLET

SMOKE BULLET

AMBER FLAT STYLE

SMOKE FLAT STYLE

K5442

K5443

K5440

K5441

K5455

K5456

x x

CHROME BEZEL Colored Lens

L .E .D. FRONT TURN SIGNAL INSERTS Amber Illumination - Run & Turn Functions Includes Load Equalizer Note: To simplify installation of the load equalizer on most 97-later Models, see our Load Equalizer Adapter (P/N K4837 - pg 87). Note: European bikes require hardwiring.

BLACK BEZEL Colored Lens

‘94 and up FLSTC, ’94-’96 FLSTN ’05 and up FLSTN, ’08-’11 FLSTSB, ’02 and up FLSTF, ‘10 and up FLSTFB, ’06 FLST, ’05-’07 FLSTSC, ’02-’03 FLSTS, ’05-’06 FLSTFSE, ‘10 and up FLSTSE ’00-’07 FXSTD, ’02-’08 FXST, ’02 and up FXSTB, ’02-’06 FXSTS, ’07-’10 FXSTC, ‘08’11 FXCW/C, ’07 and up FXSTSSE, ’03-’04 FXSTDSE, ‘11 and up FXS ‘94 and up FLHTC, FLHTCU, FLHTK; ’94 and up FLHT, ’98-’03 FLTR, ’94-’96 FLTCU, ’94 and up FLHR, ’98 and up FLHRC ’06 and up FLHX, ’04-’09 FLTR, ‘10 and up FLTRX, ‘11and up FLTRU, ’04-’07 FLHRS, ’09 and up FLHTCUTG, ‘10-’11 FLHXXX, ’09 FLTRSE, ‘10 and up FLHXSE, ’06 and up FLHTCUSE, ‘11 FLTRUSE, ‘12 and up FLTRXSE, ’04-’05 FLHTCSE, ’02-’03 & ’07-’08 FLHRSE ‘01 FXDX/T & All ’02 and up Dyna Models All ’02 and up XL

x x x

FMVSS #108 Compliant

L .E .D. RE AR TURN SIGNAL INSERTS Red Illumination Turn Function Only (unless noted) Includes Load Equalizer Note: To simplify installation of the load equalizer on most ’97-later Models, see our Load Equalizer Adapter (P/N K4837 - pg 87). For full Multi-Function performance & simplified load equalizer installation, add our Run-Turn-Brake Controller (P/N K4859 - pg 86). Note: European bikes require hardwiring.

RED BULLET

SMOKE BULLET

RED 2 CIRCUIT BULLET

SMOKE 2 CIRCUIT BULLET

K5446

K5447

K5448

K5449

K5457

K5458

K5459

K5460

RED SMOKE FLAT STYLE FLAT STYLE

CHROME BEZEL Colored Lens

K5444

K5445

BLACK BEZEL Colored Lens

’94 and up FLSTC, ’06 FLST, ’94-’96 FLSTN ’05 and up FLSTN, ’08-’11 FLSTSB, ’02 and up FLSTF, '10 and up FLSTFB, ’05-’07 FLSTSC, ’02-’03 FLSTS, ’05-’06 FLSTFSE ’00-’07 FXSTD, ’03-’04 FXSTDSE, ’02-’08 FXST, ’02-’09 FXSTB, ’02-’06 FXSTS, ’07-’10 FXSTC, ’07-’09 FXSTSSE ‘94 and up FLHTC, FLHTCU, FLHTK; ’94-’09 FLHT, ’98-’03 FLTR, ’94 and up FLTCU,’11 and up FLTRU, ’94 and up FLHR, ’98 and up FLHRC ’06-’09 FLHX, ’04-’09 FLTR, ’04-’07 FLHRS, ’04-’05 FLHTCSE, ’06 and up FLHTCUSE, '11 FLTRUSE, ’02-’03 & ’07-’08 FLHRSE 10 and up FLHX, '10 and up FLTRX, ‘10 and up FLSTSE, ‘11 and up FXS ’01 FXDX/T & all ’02 and up Dyna Models (except ’09 and up FXDB, '10 and up FXDWG) 09 and up FXDB, '10 and up FXDWG All ’02 and up XL (except ’07 and up XL1200N, '10 and up XL1200X, ’09 and up XL883N) ‘07 and up XL1200N, '10 and up XL1200X, '09 and up XL883N

x x

FMVSS #108 Compliant

UNICEA

The multi-function L.E.D. Taillight & Turn Signal Kit for bikes with Tombstone Taillights! Just like a Panacea but all functions illuminate in red! Fits: ’05-’10 Deluxe, ’05-’07 Springer Classic, ’07-’08 FLHRSE, & ’02-’03 FLSTS

K5414 Unicea Tombstone Taillight System (kit)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

CONTROLLERS & FLASHING MODULES WITH RUN-TURN-BRAKE CONTROLLER RUN

WITHOUT RUN-TURN-BRAKE CONTROLLER RUN

Taillight & Turn Signals Illuminate Red

Only Taillight Illuminates Red

REAR RUN-TURNBRAKE CONTROLLER WITH PULSE BRAKE

TURN

Selected Turn Signal Flashes Red. Other Turn Signal Remains Red.

Selected Turn Signal Flashes. Other Turn Signal Remains Unlit.

A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, & brake lights; not just brake/turn like our competitors! It can be used with our L.E.D. Silver Bullets, stock turn signals (red lenses sold separately) or any single filament light you may already have installed on the rear of your bike. Completely plug & play for most ’96-newer Harley-Davidsons. Compatible with ’02-later H-D factory cruise control. Pulsing Brake feature can be turned on or off easily.

K4859 Fits: ’97 and up Electra Glides, ’98 and up

Road Glides (except ’09 FLTRSE, ’10 and up FLTRX, ’12 and up FLTRXSE), ’06-’09 Street Glides, ’97 and up Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’11 Dynas (except ’09-’11 FXDB, ’10-’11 FXDWG), ’99-’03 Sportsters (ea)

K5497 Fits: ’11 and up Softails (except ’11 and up FXS,

BRAKE Taillight & Turn Signals Pulse Red 3 Times* & then Taillight & Turn Signals Remain Brightly Lit Red Until Brake is Released

* Pulsing Brake feature can be turned on or off easily.

BRAKE

’11 and up FLSTSE), ’12 and up Dynas (except ’12 and up FXDB, ’12 and up FXDWG)

Note: For installation on earlier models or ’04 and up Sportsters (except ’07 and up XL1200N, ’10 and up XL1200X, ’10 and up XL88N), see adapter harnesses - pg 87. Important: 1. P/N’s K4859 or K5497 are NOT the same controllers used in Küryakyn Panacea Systems. 2. P/N’s K4859 & K5497 are not compatible with aftermarket or accessory modules that alter the functions of the stock taillight & turn signals. If you have already made modifications to your bike’s taillight &/or turn signals, you will have to return your bike to stock form before installing either of our Controllers. 3. Bikes requiring P/N K4859 that are equipped with factory security system & low-draw or L.E.D. lights also require P/N All Shown with L.E.D. Conversions - Sold Separately K4857 or P/N K5498.

Only Taillight Brightens

WO R KS G R E AT O N '10 & L AT E R S T R E E T G L I D E S , ROAD GLIDE CUSTOMS, TRIKES & ANY OTHER B I K E S F E AT U R I N G T WO C I RC U I T R E A R TA I L L I G H T S

K908

Another innovative design, this module plugs into the stock wiring harness & makes single filament custom lights function as running lights & turn signals. It works great with our Halogen Silver Bullets! One controller required per pair of lights.

PULSATING BRAKE LIGHT CONTROLLER Activate up to 6 brake lights to flash automatically & then stay on with a single squeeze of your brakes. Does not harm the life of your lights. Fits: Universal - Hard wires into rear wiring harness brake wire (Not for use with Panacea, Run-Turn-Brake controller systems

K908 Pulsating Brake Light Controller (ea) Note: Provides 3 seconds of decelerating flashing brake lights.

FRONT RUN-TURN CONTROLLER

Fits: ’96-’08 Softails, ’97-’05 Dynas, ’97-’05 Electra Glides, Road Glides, ’97-’06 Road Kings & ’97-’10 Sportsters

K4865

K4865 Front Run-Turn

Controller (ea)

LOAD EQUALIZERS SELF-REGULATING LOAD EQUALIZER This technologically advanced load equalizer won’t overheat, even when subjected to 4-way flashers, non-stop security system flashing while trailering, or when stuck at never-ending red traffic lights. Plug-&-play when used with Küryakyn Panacea, Run-Turn-Brake Controller, or Load Equalizer Adapters – can also be spliced in custom applications.

K5498 Self-Regulating Load Equalizer (ea)

Prototype Shown

LOAD EQUALIZER ADAPTER 8-PIN HARDWIRE ADAPTER This splice-in 8-pin Amp connector is required to install Panacea Taillights or a Küryakyn Run-Turn-Brake Controller. Fits: ’91-’95 Softails, ’91-’96 Dynas, ’91-’96 Electra Glides, Tour Glides, Road Kings, or ’91-’98 Sportsters

K4832 8-Pin Hardwire Adapter (ea)

This handy adapter allows splice-free installation of Küryakyn load equalizers equipped with 3-pin connectors. Fits: ’97 and up Electra Glides, ’98 and up Road Glides (except ’09 FLTRSE, ’10 and up FLTRX, ‘12 and up FLTRXSE), ’06-’09 Street Glides, ’97 and up Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’11 Dynas (except ’09-’11 FXDB, ’10-’11 FXDWG), ’99-’03 Sportsters

K4837 Load Equalizer Adapter (ea)

2 AMP LOAD EQUALIZER Universal Load Equalizer for use when stock turn signals are replaced with L.E.D. or other low-draw lights. One required for each pair of lights.

K4810 2 Amp Load

Equalizer (ea)

K4837

K4832

K4810 Prototype Shown

K4857

K4831 K5499

6-PIN TO 8-PIN ADAPTER FOR SPORTSTER

This plug-in adapter is required for installation of Panacea Taillights or Run-Turn-Brake Controllers. Fits: ’04 and up XL (except ’07 and up XL1200N, ’10 and up XL1200X, & ’10 and up XL883N)

K4831 6-Pin to 8-Pin Adapter (ea)

LOAD EQUALIZER ADAPTER FOR

‘10 AND UP FLHX & FLTRX

This plug-in adapter allows up to two load equalizers to be added to 2010 & later Street Glides & Road Glide Customs when converting from incandescent to L.E.D. or other low-draw turn signals without the need to cut & splice. Fits: ’10 and up FLHX Street Glides & FLTRX Road Glide Customs

K5499 Load Equalizer Adapter (ea)

ALARM COMPATIBLE LOAD EQUALIZER When either a Panacea System or a Run-Turn-Brake Controller is installed on a Late Model H-D equipped with the factory security system (T.S.S.M.) & L.E.D. or low-draw turn signals, the security light will remain lit at all times. The security system remains fully functional, our products do not disable the system in any way. If you find the illuminated security light offensive, simply plugging in this optional load equalizer will correct the situation.

K4857 Alarm Compatible

Load Equalizer (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

REAR END LIGHTING K7766

K7767 K8650

EVERYBODY LOVES A GREAT REAR END Stock bikes are simply a blank canvas waiting to be turned into something great. Küryakyn’s Rear End Accent Lighting perfectly blends function & style for the ultimate rear end transformation. Using high-tech L.E.D.’s wrapped in classic chrome, standing out & getting noticed will become a regular occurrence. Features include Run-Turn, Run-Brake, & combinations of both for the best & most unique rear end lighting available. Plug-&-play wiring makes installation simple & straight forward Allowing you to get back on the road in no time.

A. A E R I O N ™ L I G H T BA RS

D. C O LOS S U S R E A R T R I M

Going beyond just an elegant part, the integrated bright rear & side-facing dual function L.E.D. lighting adds visibility!

FO R TO U R- PA K®

Custom Lighting Options:

• Side-facing “run & turn” with the rear-facing “run & brake” • Side-facing & rear-facing all “run & brake” • Side-facing & rear-facing all “run & turn” Fits: ’97-’12 Electra Glide Classic & Ultra Classic Electra Glide

K7766 Aerion Lightbars (pr) Note: Will also fit other Touring Models if they have been equipped with H-D Twin Rail Chrome Saddlebag Guard Rails (H-D P/Ns K90982-09 or K91216-97).

B. L . E . D. RU N -T U R N - B R A K E S P O I L E R Lighting features include red running lights, bright red brake lights, & outer-third flash amber lights when the turn signals are activated. Mounts to most H-D Tour-Paks & can be used with or without luggage racks. Fits: ’93-’12 Touring Models & Trikes with King, Chopped, or Razor-Pak Tour-Paks

K7767 L.E.D. Run-Turn-Brake Spoiler (ea)

Note: ‘93-’96 Models require 8-Pin Hardwire Adapter (P/N K4832). Note: ‘10-’12 FLHTK requires Luggage Rack Relocation Kit (P/N K7138).

C. RU N - B R A K E L I G H T BA R FO R TO U R- PA K® Features include Super-Bright L.E.D’s that provide additional “run” & “brake” lighting to the rear of the bike & an unmistakable chrome finish for that signature Küryakyn style.

K7756 Fits: ’06 and up Touring Models &

Trikes with King or Ultra Tour-Pak (ea)

K7757 Fits: ’94-’05 Touring Models with King or Ultra Tour-Pak (ea)

U.S. Patent D630,136

If your bike wasn’t noticed before, it sure will be now! This engaging chrome trim is applied right over the stock Tour-Pak light bar, adding an element of surprise to the back of your ride.

P/N K86 4 6 PG 208

Fits: ’93 and up FLHTCU, ’10 and up FLHTK, ’08-’09 FLHTCUSE, ’93-’96 FLTCU, & ’09 and up FLHTCUTG

K8666 Colossus Rear Trim (ea)

E. LOW E R L I G H T E D T R I M FO R TO U R- PA K® Break free from the ordinary! Rear facing lenses are lit with red L.E.D.’s, which may be wired for auxiliary run/ brake, or run/ turn function. Lenses on the sides feature a new finish which appears as chrome, but will allow the red lights in an Ultra Tour-Pak to shine through. Fits: ’94 and up Electra Glides, Tour Glides, & any other Touring Models that have been equipped with King or Ultra Tour-Pak

K8650 Lower Lighted Trim (pr)

F. L I G H T E D L I D ACC E N T FO R TO U R- PA K® Patent Pending

Set yourself & your bike miles ahead by adding some much needed lighting in just the right spot. Featuring a lightweight chrome ABS housing, red LED’s with a red lens feature “run” & “brake” lighting.

P/ N K159 5 PG 208

Fits: ’06 and up King or Ultra Tour-Paks

K7755 Lighted Lid Accent (ea)

P/N K7752 PG 208

P/ N K 413 3 PG 226

P / N K 4 17 8 PG 222

FA I R I N G C H RO M E P G 176 P / N K 713 9 PG 252

B P/N K86 47 PG 209

P/N K86 4 8 PG 209

P/N K8979 PG 243

P/N K8973 PG 24 4 P/ N K 916 6 P G 218

P/ N K 813 0 P G 214

PANAC E A SYSTEM PG 83

P / N K 8 6 21 P G 210

P/ N K15 6 4 PG 90 P/ N K 76 52 PG 254

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

P/N K4 65 PG 267

ALL NEW! FIND ALL OF OUR NEW PRODUCTS FOR TRIKES P G S 212-213

REAR LIGHT BARS FOR TRIKES

Küryakyn’s Rear Light Bars blend sculpted chrome housings with auxiliary run, turn, & brake lighting. Easy to install with pre-applied 3M VHB adhesive tape & plug-&-play wiring.

K7268

Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trike

K7268 Rear Light Bars (pr)

K8644 K1564 K1564 K8644

LIGHTED LOWER SADDLEBAG L.E.D. ACCENT If you want to get someone’s attention, whisper. The subtle, directional shape suggests forward motion while providing a fine chrome accent line that clings to the bottom edge of the saddlebag. The rear-facing red lights operate as auxiliary run & brake lights & punctuate the trailing edge of this classy accent. Wired easily via plug connections on ’97 and up Models. Fits: ’93 and up Electra Glides, ’98 and up Road Glides, ’06 and up Street Glides, ’93-’96 Tour Glides, & ’94 and up Road Kings with hard saddlebags

K1564 Lighted Lower Saddlebag Accents (pr) Note: ’93-’96 Models require lights be hard-wired to motorcycle. Excludes ’09 FLTRSE, ’12 and up FLTRXSE and ’10 and up FLHXSE.

LIGHTED FENDER SKIRT This subtle lighted chrome Fender Skirt is just enough to catch your eye without dominating the scene. Accented with a sliver of red L.E.D. light, it also serves as an auxiliary running & stop light. Installation is a breeze. Fits: ’04-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE

K8644 Lighted Fender Skirt (ea)

K7758

A. REAR FENDER STRIP LIGHTS

Add additional Run & Brake L.E.D. lighting to your rear end! The gently curved chrome housings sit perfectly in the contour of the ’09 and up rear fender skirt but also looks great on most any full-length fender. Plug-&-play. Fits: H-D Touring & Softail Models with full-length rear fenders & Universal applications on other models with full-length fenders with flat sides - Lights are approximately 12” long

K7758 Chrome (pr) K7744 Gloss Black (pr)

B. TURN SIGNAL BAR FILLER PANELS

U.S. Patent D647,433

Cover those ugly exposed wires the professional way! Gain additional “run” & “brake” lighting to the rear of your ride if you choose from the two lit options. Installation is hassle free with no tools required. Fits: ’10 and up Street Glides (except ’10 and up FLHXSE) & ’10 and up Road Glide Customs (except ‘12 and up FLTRXSE)

K5448

K5460

K3154 K3153 K3156

K3153 Lighted Turn Signal Bar Filler Panel, Smoke Lens (ea)

K3154 Lighted Turn Signal Bar Filler Panel, Red Lens (ea)

K3156 Unlit Turn Signal Bar Filler Panel (ea)

C. L.E.D. TWO-CIRCUIT REAR TURN SIGNAL INSERTS Convert your stock incandescent turn signals to fast acting, super-bright L.E.D.! Our inserts provide both low “run” & high “brake/turn” intensity. Available with either smoke or red lenses. Fits: ’10 and up FLHX, ’10 and up FLTRX, ‘10 and up FLSTSE, ‘11 and up FXS, ’09 and up FXDB, ’10 and up FXDWG, ’07 and up XL1200N, ’09 and up XL883N, ’10 and up XL1200X

K5448 Red L.E.D. Two Circuit Rear Turn Signal Inserts, Chrome Bezel Red Lens (pr)

K5459 Bullet Two-Circuit Rear Turn Signal Inserts, Black Bezel/Red Lens (pr)

K5449 Red L.E.D. Two Circuit Rear Turn Signal

Inserts, Chrome Bezels/Smoke Lens (pr)

K5460 Bullet Two-Circuit Rear Turn Signal

Inserts, Black Bezel/Smoke Lens (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

TA I L L I G H T S & CUSTOM TURN SIGNALS DELUXE BULLET LIGHT REAR TURN SIGNAL KIT FOR TOURING

Küryakyn makes it easy to give the rear fender on Road Kings, Road Glides, & FLHT Standards a clean, uncluttered look like the FLHX without breaking the bank! Includes everything you need: Bullet Light Rear Turn Signal Bar (P/N K2098), Curved License Plate Frame (P/N K3162), & Rear Bar Accent (P/N K1320). Or purchase the items separately (left). Buy this kit & save! Fits: ’97-’08 Road King Models (except ’07-’08 FLHRSE), ’98-’08 Road Glide, ’97-’08 FLHT Standard

K3000

K3000 Deluxe Bullet Light Rear Turn Signal Kit (kit) K2098 K1320

K2098

K3162

K Ü RY A K Y N M A K E S I T E A S Y TO G I V E Y O U R R O A D K I N G O R H E R I TA G E T H E S L E E K S T R E E T G L I D E LO O K

BULLET LIGHT REAR TURN SIGNAL BAR Here’s a great setup that will allow you to replace your large, stock rear turn signals with these streamlined, bullet shaped turn signals & relocate your license plate below the taillight. There is a built-in light to illuminate the relocated license plate. The bullet shaped turn signals are single circuit & come equipped with our stylish deep-dish bezels with red lenses. A flat license plate support is included but an optional Curved License Plate frame is available separately (P/N K3162). Fits: ’91 and up Electra Glides, Tour Glides, Road Kings; ’98-’08 Road Glides, & ’86 and up FLST/C/N

K2098 Bullet Light Rear Turn Signal Bar (ea)

K3159

K3158

K3162

REAR BAR ACCENT FOR TOURING MODELS

Here’s a quick & easy way to hide the mounting bosses after moving your license plate while adding a custom touch at the same time! Fits: All ’97-’08 Road Kings (except ’07-’08 FLHRSE), all ’98-’08 Road Glides, all ’97-’08 FLHT Standards, (will also fit ’04 FLHTCSE if antenna is relocated)

K1320 Rear Bar Accent (pr)

CURVED LICENSE PLATE FRAME A classy upgrade for our Bullet Light Rear Turn Signal Bar (P/N K2098) & Custom Turn Signal Bar (P/N K2099).

K3162 Curved License Plate Frame (ea)

LICENSE PLATE MOUNTING HOLE COVERS With so many riders using our Side Mount License Plate Mounts or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. Both covers install in minutes & completely cover the footprint left by the stock mount. Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (Both styles also cover the fourth hole found on some Dyna & Sportster Models)

K3158 License Plate Mounting Hole Cover with Emblems (ea) K3159 Tribal License Plate Mounting Hole Cover (ea)

K1320

SLIMLINE LOW-PROFILE TOMBSTONE TAILLIGHTS FOR CUSTOM APPLICATIONS L.E.D. technology with a thin, low profile housing that lays back against the fender; a classic look for the 21st century. Two versions offered. Tombstone Taillight alone gives you a complete run-brake L.E.D. taillight assembly with a thin rubber gasket. The Tombstone Taillight with Turn Signal Mount includes a complete run-brake L.E.D. taillight, chrome base plate turn signal mount with built-in license plate light, & a removable license plate bracket. The turn signal mount requires our sleek Silver Bullets (P/N K1650 - pg 95.

K4990 Universal Tombstone Taillight (ea) K4992 Tombstone Taillight with Turn Signal Mount (ea) Note: These taillights will not replace a stock H-D taillight on a stock H-D fender without extensive modification & fabrication. Installation of this product may be in violation of FMVSS #108.

NARROWED REAR TURN SIGNAL BAR Tuck in your obtrusive turn signals with this streamlined Rear Turn Signal Bar. At 8-1/4” long, it’s about 4-3/4” shorter than the stock bar. This die-cast, chrome-plated replacement bar bolts on easily & accepts the stock turn signal assemblies.

CURVED LICENSE PLATE FRAME FOR SLIMLINE LOW- PROFILE TOMBSTONE TAILLIGHT

Puts the finishing touches on our Tombstone Taillight (P/N K4992) Accepts 4” x 7” plates. Fits: Slimline Low-Profile Tombstone Taillight Only

K9157 Curved

License Plate Frame (ea)

Fits: Following Models when equipped with 3-1/4” Flat Turn Signals Housings: ’91 and up Electra Glides (except ’09 FLHT Standard), ’91-’96 Tour Glides, ’98-’03 Road Glides, ’94 and up Road Kings (except ’09 and up FLHR), ’86 and up FLST/C, & ’93-’96 FLSTN

K4990

K2384 Narrowed Rear Turn Signal Bar (ea) K9157 BUILT-IN LICENSE PLATE LIGHT!

K2099

CUSTOM TURN SIGNAL BAR The Küryakyn streamlined Custom Turn Signal Bar is dramatically different than other custom turn signal bars. Not only is it sleeker, you ditch the bulbous stock turn signals & replace them with small L.E.D. Silver Bullets (P/N K1650), sold separately. A flat license plate support is included, but a trick Curved Frame (P/N K3162) adds an even more impressive look. Fits: ’91 and up Electra Glides, Tour Glides, Road Kings, ’86 and up FLST/C/N

K2099 Custom Turn Signal Bar (ea)

INFINITY TEARDROP LIGHT FROM KUHL REFLECTIONS

U.S. Patents 7,029,152 & 7,249,874

Really turn heads with its patented Infinity Effect adding depth to make the light appear to go on forever. Features include super bright L.E.D. run & brake lights. A great addition to stock or custom saddlebags or any flat mounting surface (housing is 6” x 3”), this light is designed for custom applications & is fastened to the bike using two screws or 3M VHB (included). Fits: Universal 12V DC applications

K5404 Infinity Teardrop Light (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

THESE LIGHTS CAN EASILY BE COMBINED WITH P-CLAMPS, TWO-PIECE FORK

MOUNTS, ADAPTER STUDS, OR CUSTOM BRACKETS OF YOUR CREATION—THE OPTIONS ARE LIMITLESS! S U P E R B R I G H T D E E P D I S H L . E . D . S I LV E R B U L L E T S : P ROV I D E LO W- D R AW & R A P I D I L LU M I N AT I O N & G I V E YO U T H E S T U N N I N G G O O D LO O KS O F A FAC E T E D R E F L EC TO R . H A L O G E N S I LV E R B U L L E T S : AS S E M B L E D W I T H H I G H - S H O C K , H E AV Y D U T Y S I N G L E F I L A M E N T 20

K1647

WAT T Q U A RT Z H A LO G E N B U L B S . W E R EC O M M E N D T H E M FO R U S E A S AUX I L I A RY D R I V I N G L I G H TS TO H E L P R I D E RS S E E & B E S E E N .

K1645

K1648 K2303 K1646 K2319

SILVER BULLETS WITH 3/8”-16 HOLLOW MOUNTING BOLT Wiring exits the light through the mounting bolt. Includes clear lenses only. S U P E R B R I G H T L . E . D. D E E P D I S H R E F L EC TO R BU L B

Includes clear lenses only

SILVER BULLETS WITH 5/16”-18 MOUNTING BOLT Wiring exits the light through a hole in the body behind the mounting boss. Includes clear lenses only. S U P E R B R I G H T L . E . D. D E E P D I S H R E F L EC TO R B U L B

K1645 Small Amber; Run-Turn Dual Function (pr)

Includes clear lenses only

K1646 Small Red; Single Function (pr) K1647 Small Red; Run-Turn Dual Function (pr)

K1648 Small Amber; Run-Turn Dual Function (pr)

H A LO G E N S T Y L E

Includes clear lenses only

K2305 Small (pr) K2320 Large (pr)

H A LO G E N S T Y L E

Includes clear lenses only

K2303 Small (pr) K2319 Large (pr)

• Halogen Silver Bullets & Single function Deep Dish L.E.D. Style Silver Bullets have a single power wire & ground through their mount. • Dual function Deep Dish L.E.D. Style Silver Bullets have three wires. They cannot be used for run-brake applications because they do not change intensity. • When installing Halogen Silver Bullets as driving lights, we recommend using our Wiring & Relay kits (P/N K2328 or P/N K2202 - pg 105-106) to avoid overloading the motorcycle’s running light circuit. Note: There is no need to use a Load Equalizer with Halogen Silver Bullet kits. Although Silver Bullet lights are extremely bright & highly visible, the installation of this product may be in violation of FMVSS #108 & not intended as a replacement for stock turn signals.

SUPER BRIGHT L.E.D. MINI BULLETS Universal Mini Bullets can be used as marker lights or auxiliary turn signals. Their intensity greatly exceeds their small size. Unique 3/8” hollow bolt mounting hardware provides a very clean installation. Can also be used with our Adapter Studs (P/N K2288/2289).

K2500 Amber (pr) K2501 Red (pr)

K2501

Unlit Smoked Lens

K2500

SILVER BULLETS WITH FORK MOUNTS Small Halogen Silver Bullets are intended to be installed as auxiliary driving lights. The L.E.D. reflector style Silver Bullets are two-circuit & meant to be installed as running lights & turn signals.

K2390

Fits: H-D Models with 39mm Narrow Glide, 41mm Wide Glide (unshrouded), & ’06-’07 Dyna Models with 49mm forks

K2304

K2304 Small Halogen (pr) MOUNTING KIT ONLY

Install Silver Bullets on 39mm Narrow Glide, 41mm Wide Glide front forks & all 49mm forks on ’06-’07 Dyna Models. Important: Requires Small or Large Silver Bullets (P/N’s K1648, 2303 or 2319)

K2390 Fork Mounting Kit Only (set)

HANDLEBAR CONTROL SWIVEL MOUNTS ONLY

This mounting kit allows installation of Small Silver Bullets under the controls of ’88-’03 XL & ’88-’09 FXR, Dyna, Road King, or Softail Models. Important: Requires Small or Large Silver Bullets that have a 5/16”-18 threaded mounting hole & a wire that exits behind the mounting boss.

K2375 Handlebar Control Swivel Mounts Only (set)

SUPER BRIGHT L.E.D. STRUT MOUNT MINI BULLETS These powerful mini lights seamlessly fit on your fender struts. Each kit comes with clear lenses & a set of colored lenses that match the light output. Lenses provide a brighter glow over standard flat lenses. Fits: ’84-’11 FXST & Most Dyna Models through ’05 (Mounts in rear fender strut hole)

K2502 Red L.E.D. Strut Mount Mini Bullets (pr) K2503 Amber L.E.D. Strut Mount Mini Bullets (pr) Note: Load Equalizer not included.

LIT

SILVER BULLETS

WITH SADDLE MOUNTS

WITH SHORT FENDER STRUT MOUNT

These Super Bright L.E.D. Deep Dish Reflector style Silver Bullets replace stock front turn signals on many Touring Models.

Red, Deep Dish Style Reflector L.E.D. Silver Bullets function as turn signals only.

Fits: ’83 and up Electra Glides (except ’04-’05 FLHTCSE, ’06 and up FLHTCUSE), ’98-’03 Road Glide, ’88-’96 Tour Glides, ’94 and up Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE), ’86 and up Heritage/Heritage Classic, & ’93-’96 FLSTN

Fits: ’00-’02 Softails,’93-’05 Dyna Wide Glides, ’00-’07 Deuce, Küryakyn Slimline Low-Profile Tombstone Taillight (P/N K4992)

K1650 Small L.E.D.-Red (pr) Note: Can be combined with our Run-Turn-Brake Controller (P/N K4859).

K1649 Large L.E.D. -

UNLIT

Amber; Run-Turn Dual Function (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

BULLET LIGHT FRONT TURN SIGNAL CONVERSION KIT It’s incredible how much this simple front turn signal swap will streamline the front of your bike! By simply replacing the stock flat turn signals with these sleek bullet bodies, the front end will appear lighter & more proportionate. Mounting is the same as stock for ultra clean installation. A perfect match to Küryakyn Rear Bullet Light Turn Signal Bar (P/N K2098) for a great look front to back!

Note: Kit includes smoke lenses with amber incandescent bulbs. On-bike photo at left shows L.E.D Conversions (sold separately).

Fits: ’94 and up FLHT, FLHTC, FLHTCU, FLHTK, FLHR, FLHRC, & ’96 and up FLSTC

K5011 Bullet Light Front Turn Signal Conversion Kit (set)

K1652/53

K2290 E

K2310

E K2313

K1654/55

K2227

A. SUPER BRIGHT L.E.D. DEEP DISH STYLE REFLECTOR BULBS These bulbs are easy replacements for the new deep dish style reflector L.E.D. Silver Bullet kits.

K1652 K1653 K1654 K1655

Small Red – MR11 Type (ea) Small Amber – MR11 Type (ea) Large Red – MR16 Type (ea) Large Amber – MR16 Type (ea)

Note: May be used to convert Halogen style or older reflector style L.E.D. Silver Bullets to deep dish style reflector L.E.D with modifications to mounting hardware. If converting from halogen to L.E.D. a Load Equalizer is required (P/N K4810 or 4857) due to the very low amperage drawn.

B. SUPER BRIGHT L.E.D. REFLECTOR BULBS

These bulbs are the ideal way to convert Halogen style Silver Bullets or similar lights to L.E.D. Enjoy the low draw & low heat benefits of L.E.D. by simply changing bulbs.

K2225 K2226 K2227 K2228

Small Red – MR11 Type (ea) Small Amber – MR11 Type (ea) Large Red – MR16 Type (ea) Large Amber – MR16 Type (ea)

Note: Because of the very low amperage drawn on these L.E.D.’s, a Load Equalizer is required - pg 87

K2294

K2295

C. HALOGEN BULBS

E. BEZELS & LENSES

FOR SILVER BULLETS

FOR MINI BULLETS

K2310 Small 20 Watt Halogen Bulb - MR11 (ea)

K2313 Large 20 Watt Halogen Bulb - MR16 (ea)

K2312 Small 35 Watt Halogen Bulb - MR11 (ea)

K2314 Large 35 Watt Halogen Bulb - MR16 (ea)

Note: 35 watt bulbs should be used only with clear lenses in driving light applications. Excessive heat may damage colored lens coatings.

D. STANDARD & VISOR BEZELS FOR SILVER BULLETS

Outfit your Silver Bullets any way you choose.

K2294 Small Standard Bezel (pr)

K2290 Large Standard Bezel (pr)

K2295 Small Visor Bezel, Top Mount (pr)

These jewel-like lenses are noticeably brighter than standard flat lenses to complete the high-tech package. Each set includes chrome bezels & three sets of lenses (red, amber, & clear). Use as replacement lenses for Strut Mount Mini Bullets (P/N’s K2502 & 2503) or to update existing Mini Bullets (P/N’s K2500, 2501)

K2383 Bezels & Lenses for Mini Bullets (set)

Note: Changing lens color on L.E.D. Mini Bullets will not alter the color emitted.

F. LENSES FOR SILVER BULLETS K2343 Small - Amber

1-7/16” dia. (pr)

K2344 Small - Clear

1-7/16” dia. (pr)

K2346 Large - Amber 2” dia. (pr)

K2347 Large - Clear 2” dia. (pr)

Front Back

RAZOR EYES LATE STYLE TURN SIGNAL KIT This kit makes it a snap to update the ho-hum Classic Bullets on your bike. Set of four streamlined lights come with Küryakyn Deep Dish Bezels, Smoke Lenses, & Colored Incandescent Bulbs. (Each light measures approximately 2” diameter x 3-1/2” long)

K2317 Fits: ’00-’07 FXST/FLSTF,

These unique turn signals feature ultra bright L.E.D.’s wrapped in a 2-7/8” long by 7/8” tall chromed metal housing. Available in a single function amber for use on front or rear applications, or choose the Razor Eyes with Run-Turn-Brake function featuring red running & brake lights with amber turn signals. Fits: Universal mounting using the M10 x 1.25 by 2cm Mounting Stud

K2505 Razor Eyes - Amber Single Function (pr) K2506 Razor Eyes - Red & Amber 3 Function; Run-Turn-Brake (pr)

’91-’05 Dyna, ’91-’08 XL

Note: Not compatible with R-T-B controllers. Small Silver Bullet Mounted on Engine Guard

Small Silver Bullet Mounted on Frame Downtubes

P-CLAMPS One slick little clamp, our chrome-plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw & the fastener used to attach the accessory. 5/16” mounting hole.

K4018 K4023 K4024 K4019 K4017 K4014

GET THIS LOOK! COMBINE OUR S I LV E R B U L L E T S W I T H T H E CORRECT SIZED P-CLAMP FOR YOU R B I K E!

7/8”/1” P-Clamp, Chrome (ea) 1-1/8”/1-1/4” P-Clamp, Black (ea) 1-1/8”/1-1/4” P-Clamp, Chrome (ea) 1-3/8”/1-1/2” P-Clamp, Chrome (ea) 1-1/2”/1-5/8” P-Clamp, Chrome (ea) 39mm/41mm P-Clamp, Chrome (ea)

ADAPTER STUDS Adapter Studs are hollow & threaded 3/8”-16 on one end & 5/16”-24 the other for mounting Silver Bullets or Mini Bullet lights with 3/8” threaded mounting holes in a 5/16” hole. These come in handy for fender strut applications. The 5/16” diameter end should be cut to length to ensure adequate clearance.

K2288 Adapter Studs, 3/8” to 5/16” (pr)

TWO-PIECE FORK MOUNTS

REPLACEMENT 3/8”-16 X 1-1/2”HOLLOW BOLTS K2389 Hollow Bolts (pr)

Our sturdy, chrome-plated mounts are just the ticket to attach Silver Bullets (or custom lights using 5/16” mounting hardware) to fork tubes. 39mm, 41mm, & 49mm sizes are offered to fit Softail, Dyna, Sportster, & V-Rod fork tubes.

K2285 39mm Two-Piece Fork Mounts (pr) K2286 41mm Two-Piece Fork Mounts (pr) K2287 49mm Two-Piece Fork Mounts (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

LENSES, BEZELS, & BULBS DEEP DISH BEZELS WITH LENSES FOR BULLET TURN SIGNALS

If you’re using H-D’s accessory headlamp trim rings, our Deep Dish Turn Signal Bezels with Lenses will complete the package by providing a sleeker & racier appearance than the stock lens alone. Bezels & lenses snap into place & still retain the stock bulbs & housings.

OFF

Fits: ’00 and up H-D Models with Bullet Turn Signals

K2108 Deep Dish Bezels with Lenses, Amber (pr) K2109 Deep Dish Bezels with Lenses, Red (pr) K2107 Deep Dish Bezels with Lenses, Smoke (pr)

Note: Colored bulbs for smoke lenses must be purchased separately. Shown with L.E.D. Conversion -pg 85.

DEEP DISH BEZELS 3-1/4” FLAT TURN SIGNALS Add depth & style to your stock front or rear flat pancake style turn signals. Simply mounts over your existing lenses & features a design that allows for the existing edge of the lens to glow when illuminated. FOR

REPLACEMENT LENSES FOR STOCK TURN SIGNALS

Fits: 3-1/4” Flat Style Turn Signals (’86 and up Electra Glides, Tour Glides, Road Glides, Road King & Heritage)

Fits: ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings, & Heritages equipped with 3-1/4” Flat Turn Signals

K4996 Red (pr) K4997 Smoke (pr)

K7790 Deep Dish Bezels for 3-1/4”

Note: Colored bulbs for smoke lenses must be purchased separately - pg below.

Flat Turn Signals (pr)

A. L.E.D. BULBS An inexpensive way to upgrade from incandescent to L.E.D. bulbs. Advantages include low draw, long life, & resistance to vibration. Due to the directional design of these bulbs, it is necessary that the bulb face the lens for proper illumination. Not recommended for ’99-E ’03 taillights or ’86 and up flat lens turn signals found on Electra Glide, Road King, or Heritage Models.

K4815 K4816 K4817 K4818

Red L.E.D. Single Circuit Bulb (ea) Replaces 1156 Red L.E.D. Dual Circuit Bulb (ea) Replaces 1157 Amber L.E.D. Single Circuit Bulb (ea) Replaces 1156

Amber L.E.D. Dual Circuit Bulb (ea) Replaces 1157 Note: Because of the very low amperage drawn, a Load Equalizer is required - pg 87.

B. L.E.D. SPHERE BULB C. COLORED TURN Features 32 mega-bright red L.E.D.’s in a completely sealed package. The unique design provides full hemispherical illumination. Same dimensions as standard 1156 incandescent bulb so can be used as a direct replacement for those applications.

K4801 Red L.E.D. Single Circuit Bulb (ea) Replaces 1156

Note: Because of the very low amperage drawn, a Load Equalizer is required - pg 87.

SIGNAL BULBS

Direct replacements for 1156, 1157 or 3157 bulbs, these red & amber bulbs are just the ticket for bikes with clear or smoke turn signal lenses.

K4812 Red- Replaces 3157 (ea)

K4813 Amber-Replaces 1157 (ea)

K4814 Red-Replaces 1156 (ea)

SMOKE LENS KITS FOR TOURING OR HERITAGE

LAYDOWN TAILLIGHT LENSES

Ditch your stock lenses & show some style with the Smoke Lens Kits. Turn signal bulbs are red or amber incandescent & fender tip bulbs are red or amber L.E.D. TURN SIGNAL & FENDER TIP LENS & BULB KITS

Here is a top quality laydown style replacement lens for late-model Harleys. It only takes a few minutes to replace your bulky, stock squareback lens with this streamlined beauty.

Includes fender tip lens with L.E.D. bulb & a pair of smoke turn signal lenses with colored incandescent bulbs.

K4789 Smoke Lens w/Clear License Plate Window (kit) K4987 Red Lens w/Clear License Plate Window (kit)

Fits: ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings, & FLST Models with 3-1/4” Flat Turn Signal Housings & Fender Tip Lights

K4994 Front Smoke Lens/Amber Bulb Kit (set) K4995 Rear Smoke Lens/Red Bulb Kit (set) Note: Does not fit ’09-’12 FLHT FLHTC, FLHTCU, FLHTK or Trikes.

FENDER TIP LENS

& BULB KITS

Includes fender tip lens with L.E.D. bulb. Fits: ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes, & FLST Models with Fender Tip Lights

K4824 Front Fender Tip/Amber Bulb Kit (set) K4823 Rear Fender Tip/Red Bulb Kit (set) Note: Does not fit ’09-’12 FLHTC, FLHTCU, FLHTK or Trikes.

Fits: ’99-E’03 Electra Glides, Road Kings, Road Glides, ’99-E’03 Dynas, ’99-E’03 Sportsters, & ’00-E’03 Softails (except FXSTD, FXSTDSE, FLSTS)

Fits: L’03 and up Electra Glides & Road Kings (except ’07-’08 FLHRSE), ’06-’09 Street Glides, L’03-’09 Road Glides (except ’09 FLTRSE) ‘11 and up FLTRU, L’03 and up Dynas (except ’09 and up FXDB, ’09-’10 FXDFSE, ’10 and up FXDWG), L’03-’12 XL (except ’07-’12 XL1200N, ’10 and up XL1200X, ’09 and up XL883N, ‘11 and up XL1200C), L’03 and up Softails (except FXSTD, FLSTS, FLSTSC, FLSTN, FXCW/C, FXSTDSE, FXSTSSE, FLSTSE, FXS)

K4767 Smoke Lens w/Clear License Plate Window (kit) K5450 Smoke Lens w/o Clear License Plate Window (kit)

K5452 Red Lens w/Clear License Plate Window (kit) K5451 Red Lens w/o Clear License Plate Window (kit) Fits: ’73-’98 H-D taillights as well as taillights found on most ’99 Softail Models (does not fit Twin Cam Models)

K4962 Laydown Taillight Lens (ea) G R E AT F O R H - D U LT R A TOU R- PA KS

K2127

K2229

2127

D. H-3 REPLACEMENT BULBS Fits: All H-3 bulb applications including Küryakyn 3” Driving Lights & Adjure Passing Lamps

K2127 35 Watt Standard Replacement (ea)

K2229 35 Watt Super White (ea)

E. IRIDIUM

COATED RED INCANDESCENT BULB

This is the best red bulb we’ve been able to locate. It absolutely will not fade to pink over time. If you’re running a clear or smoked lens, this is the only way to go. Replaces 1157 – two circuit bulbs.

K4811 Iridium Coated Red Bulb (ea)

F. SUPER BRIGHT PULSING BULB This self-modulating bulb warns drivers behind you of your deceleration. Apply the brakes & the bulb pulses rapidly & then remains brightly illuminated as long as the brakes are applied. Sold as a pair to outfit Tour-Pak®s or individually to cover most 1157 taillight applications. Includes spare G4 2-pin Halogen bulb. Fits: Replaces 1157 bulbs in run-brake taillight applications

K925 Super Bright Pulsing Bulb (ea)

K919 Super Bright Pulsing Bulb (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

H-3

K2224

H-3

K2215

K2214

White Technology

K2216

K2222

H-4

WIXTECH 881 PASSING LAMP BULBS SUPER SPOTS SUPER WHITE

• 30% brighter than stock • Extreme white appearance for an affordable price • Looks great with upgraded brighter headlamps • 27 watt 881 style bulb is a direct replacement for late ’05 and up H-D passing lamps

H-4

K2211

WIXTECH H4 HEADLIGHT BULB

H-4 REPLACEMENT BULBS WITH 3-PRONG

SUPER SPOTS EXTREME XENON SUPER WHITE

• • • •

Extend visual lighted range approximately 30% Extreme white appearance, 4100K color rated Affordable price for the light you want H-4 Bulb with p43T base (direct replacement for H-D headlights)

(P43T STYLE) BASE

The most common H-4 bulbs used in motorcycle applications. Direct replacement for stock H-D H-4 bulbs.

K2137 90/100 Watt (Clear) High Intensity (ea)

K2222 Extreme Xenon Super White

K2144 55/60 Watt (Premium

Bulb, 60/55 Watt (ea)

Blue) Brightest, Light Most Closely Resembles Sunlight (ea)

Limited Lifetime Warranty from WixTech

K2224 Super White Bulb (pr) H I G H E R O U T P U T W I T H O U T H I G H E R WAT TAG E PIAA utilizes the latest in integrated computer-aided technology. Only the highest-grade materials are selected for use in PIAA products & to ensure complete satisfaction, every bulb is 100% tested at each step of the manufacturing process.

KELVIN SCALE: 5250K Sunlight Blue White

With a rating of 5000K, this H-3 bulb will give your factory lights a beautiful bluish-purple look. No need to sacrifice performance for style. With PIAA’s XTRA technology you’ll have plenty of power.

K2215 Super Plasma GT-X, H-3 Bulb (ea)

• Wattage—55W=110W • Bulb Type—H-3 • Color Temp—5000 Kelvin • Technology—Super Plasma GT-X with XTRA Technology

PIAA’s twin color technology provides a Super Plasma low beam which produces a bluish-purple look & a Super White high beam for superior light output.

K2211 Super Plasma

GT-X, H-4 bulb (ea)

• Wattage—60W/55W=135W/125W • Bulb Type—H-4 Anti-Vibration • Color Temp—5000 Kelvin • Technology—Super Plasma GT-X w/XTRA Technology

100

A great upgrade for your factory motorcycle headlamps. They provide a brilliant Xtreme cool white light rated at 4150K to enhance your headlights.

K2210

Yellow Red

5000K Super Plasma 4300K H.I.D. Bulb 4000K Xtreme White Plus 3800K Super White 3200K Standard Halogen Bulb 2600K Standard Incandescent Bulb -

K2214 Xtreme White (ea) • Wattage—35W=70W • Bulb Type—H-3 • Color Temp—4150 Kelvin • Technology—Xtreme White with XTRA Technology

By utilizing quartz glass, PIAA’s Anti-Vibration bulb allows better dissipation of heat. A thicker diameter filament support is fixed to the glass tube allowing the bulb to withstand a large range of motion.

K2210 Xtreme White Plus (ea) • Wattage—60W/55W=110W/100W • Bulb Type—H-4 Anti-Vibration • Color Temp—4150 Kelvin • Technology—Xtreme White Plus with XTRA Technology

White Technology

Match these bulbs to both headlights & other accessory lights for a sleek, unified appearance. Choose from a single filament or dual filament for your specific application. These bulbs are used for turn signals & brake lights making you more visible for a safe & enjoyable ride.

K2216 Xtreme White Plus (pr) • 1156 Single Filament • Wattage—27W • Bulb Type—1156 • Color Temp—4150 Kelvin • Technology—Xtreme White with XTRA Technology

K2217 Xtreme White Plus (pr) • 1157 Dual Filament • Wattage—27W/8W • Bulb Type—1157 • Color Temp—4150 Kelvin • Technology—Xtreme White with XTRA Technology

L.E.D.HEADLAMPS & PASSING LAMPS

Lit

Unlit

PHASE 7 HEADLAMPS & PASSING LAMPS • Complex Reflector design provides unmatched performance while providing the appearance of a traditional headlamp.

• Low beam current draw 1.5 amps (stock halogen is 4.9 amps)

• Passing lamp’s complex reflector complements the look of the headlamp.

• Passing lamps (pr) current draw 1.4 amps (stock halogen (pr) 4.0 amps)

• Impact resistant polycarbonate lenses with chemical & scratch resistant non-yellowing coating.

• Meets applicable DOT, FMVSS or SAE requirements – 3-year warranty on headlamp & passing lamps.

• High beam current draw 2.3 amps (stock halogen is 5.5 amps)

4-1/2” L .E.D. PASSING LAMPS

7” L .E.D. HEADLAMP

K2247 Fits: ’05 and up H-D Models with 4-1/2” Passing Lamps (pr)

K2249 Fits: Electra Glides, Street Glides, Road Kings, Trikes, FLST Models with 7” Headlights & Dyna Switchback (ea)

Note: Can be used on ’04-earlier Models but requires separate purchase of two H-D Adapter Harnesses (H-D P/N K68355-05(ea))

HIGH INTENSITY PLUS PHASE 6 HEADLAMPS & PASSING LAMPS K2261

• Advanced lens optics combined with high-power L.E.D.s provide significant improvement over halogen competitive designs.

Glides, Road Kings, Trikes, FLST Models with 7” Headlights & Dyna Switchback (ea)

• Impact resistant polycarbonate lenses with chemical & scratch resistant non-yellowing coating. • Low beam current draw 2.2 amps (stock halogen is 4.9 amps)

K2262

K2261 Fits: Electra Glides, Street

K2262 Fits: ’05 and up H-D

• High beam current draw 4.3 amps (stock halogen is 5.5 amps) • Passing lamps (pr) current draw 2.3 amps (stock halogen (pr) 4.0 amps) • Meets applicable DOT, FMVSS or SAE requirements – 3-year warranty on headlamp & 2-year warranty on passing lamps.

K7785 K7748

Models with 4-1/2” Passing Lamps (ea) Note: Can be used on ’04-earlier Models but requires separate purchase of two H-D Adapter Harnesses (H-D P/N K68355-05(ea))

L.E.D. HALO HEADLIGHT TRIM RINGS Patent Pending

One of our most popular products! Our L.E.D. Halo Headlight Trim Ring adds incredible style with it’s grooved trim, easy installation, & low draw on your electrical system. Night or day, this product is eye catching & adds much-needed style to your lights. FOR

7” HEADLIGHTS

K7750 Chrome

Fits: ’94 and up FLST Heritage, FLSTC Heritage Classic, FLSTF Fat Boy, FLSTFB Fat Boy Lo, FLSTN Heritage Softail Nostalgia, FLSTN Heritage Softail Special, & FLSTN Softail Deluxe (ea)

K7785 Chrome

Fits: ‘83 and up Electra Glides, ‘06 and up Street Glides, ‘94 and up Road Kings & ‘09 and up Trikes

K7733 Gloss Black

Fits: ‘83 and up Electra Glides, ‘06 and up Street Glides, ‘94 and up Road Kings & ‘09 and up Trikes

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

101

BEST PERFORMING & BEST PRICED K2249

K2247

K Ü RYA K Y N H A S T E A M E D U P W I T H T RU C K- L I T E TO B R I N G YO U, W I T H O U T QUESTION, THE BEST PERFORMING L . E . D. FORWARD LIG HTI NG PRODUC TS AVA I L A B L E ! T H I S S E ASO N , T H E P H AS E 7 H E ADL AM P & PASS I NG L AM PS PROVI DE ANOTH ER H UG E LE AP FORWARD. L . E . D L I G H T I N G A DVA N TAG ES :

• True white light color closely matches daylight so it is softer on the eyes & provides maximum visibility. HID is often a harsh blue & halogen often appears yellow. • Significantly reduces load on motorcycle’s electrical system compared to stock halogen systems. • Simple plug-&-play upgrade from stock lighting – no adapters, ballasts or additional wiring required. • Most vibration & impact resistant lamps available - Built to last!

M O N U M E N TA L LY B R I G H T E R W I T H H A L F T H E D R AW ! STOCK HALOGEN LOW BEAM & PASSING LAMPS

L .E.D. LOW BEAM & PASSING LAMPS

LIGHT IT UP!

FOR

5-3/4” HEADLIGHTS

K7749 Chrome

K7733

Fits: ’08-’11 FLSTSB, ’99-’06 FXST, ’99-’09 FXSTB, ’94-’99 FXSTC, ’94 and up Dyna Models (except ’08 and up FXDF), ’94 FXLR, ’04-’08 XL883, ’05 and up XL883L, ’09 and up XL88N, ’06-’08 XL883R, ’04-’08 XL1200R, ’07-’11 XL1200L, ’07 and up XL1200N, ’10 and up XL1200X, & ’07 XL50 (ea)

K7270 Chrome

Fits: ‘07-’10 FXSTC, ’00-’07 FXSTD, ’93-’06 FXSTS, ’95-’97 FXSTSB, ’97-’03 FLSTS, ’05-’07 FLSTSC, ’99 FXR, ’96-’10 XL1200C, & ’99-09 XL883C (ea)

FOR

4-1/2” PASSING LAMPS

K7748 Chrome

Fits: ’83-’12 H-D Passing Lamps (pr)

102

K7733

K7748

K5005

Shown With L.E.D. Conversion Turn Signals (Sold Separately)

DRIVING LIGHTS FOR ELECTRA GLIDE , STREET GLIDE

& ROAD KING

U.S. Patent D606,215

See your ride in a whole new light! This aggressively styled halogen 3” driving light kit gives the traditional batwing fairing an entirely new personality. Compact, stretched bezels & stylized fully adjustable brackets provide a clean, stiletto sharp look with intense, focused light output. The 35 watt H-3 blue/ white high output bulb puts out a serious beam of light with lots of options. The complete kit includes everything needed to bolt them on & plug them in. Fits: ’97 and up Electra Glides, ’06 and up Street Glides, & ’97 and up Road Kings

K5005 Chrome Driving Lights (set) K5029 Gloss Black Driving Lights (set) K2229 Replacement Super White 35 Watt H-3 Bulb (ea) Note: Installation does not interfere with removal or installation of stock detachable windshield on Road King Models. These driving lights can also be installed with Küryakyn AirMaster Fairing (P/N’s K1332 or 1335) on FLST Models.

FORK MOUNTED DRIVING LIGHTS Here’s a slick way to add auxiliary lighting to the front of your bike! Our sturdy chromed steel brackets mount securely to the front fender bosses on your lower legs & neatly mount our sleek 3” diameter driving lights. The mounts allow for easy vertical & horizontal adjustment to direct additional light exactly where you want it. The lights include super white 35 watt H-3 bulbs. Finding replacements is no problem. Includes complete wiring harness. Fits: ’80-’12 Electra Glides, Tour Glides, Road Glides, Street Glides, Road Kings, & Trikes

K5008 Fork Mounted Driving Lights (set) K2229 Replacement Super White 35 Watt H-3 Bulb (ea)

HEADLIGHT VISOR 7 ” HEADLIGHT Long, lean, & mean! Features a nicely finished rolled front edge with center bullet. Fastens securely to your existing headlight. FOR

K2182 Fits: All H-D Models with 7”

headlight (ea) Note: Does not fit with H-D Accessory Trim Rings.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

103

DRIVING LIGHTS FOR ROAD GLIDE

K5007

U.S. Patent D597,230

Now Road Glide owners can also enjoy the darkness-melting power & sleek styling of Küryakyn 3” Driving Lights. This kit’s unique bracket configuration allows placement of these compact lights in the same location as the stock turn signals & also permits full adjustment. Besides being tucked in right next to the fairing, even the wiring is neatly concealed – just plug & play! Fits: All ’98 and up Road Glides

K5007 Driving Lights for Road Glide (set) K2229 Replacement Super White 35 Watt H-3 Bulb (ea)

DRIVING LIGHTS FOR FAT BOY

K5018

Add the sleek styling & proven effective Küryakyn Constellation Driving Light Bar complete with bullet turn signals for your Fatboy. These great looking lights will completely transform your riding experience with increased visibility & a whole new look. Fully adjustable width & front to rear positioning make these ideal for use with Küryakyn AirMaster Quick Release Windshields & AirMaster Fairings.

K5001 Constellation Driving Light Bar (ea)

Fits: Requires Model Specific Mounting Bracket (sold separately) Patent Pending

DIAMOND CUT ICE-SMOOTH CLEAR LENS HEADLAMPS These headlights & passing lamps project a strong beam from their gemstone inspired reflectors. Headlights include a 55/60 watt H4 bulb & the passing lamps utilize 35 watt H-3 bulbs. DOT Approved.

K2147 7” Headlamp (ea) K2350 5-3/4” Headlamp (ea) K2355 4-1/2” Passing Lamps (pr)

104

K5018 Mounting Bracket for Fat Boy (ea)

Fits: ’90 and up Fat Boy & Fat Boy Lo

K5013 K5012

K5013

K5012

WORKS GREAT WITH OUR QUICK RELEASE WINDSHIELDS!

CLAMP-ON FORK MOUNTED DRIVING LIGHTS

SIDE MOUNT

Punch bright holes through the darkness for improved night vision & greater visibility! We’ve combined our super sleek 3” Halogen Bullet Driving Lights with an innovative mounting kit to allow simple installation on exposed 39, 41, or 49mm fork tubes. Unique clamp-on brackets place the driving lights in front of, or to each side of the fork tubes for clearance with other accessories or to get just the look you want. SIDE MOUNT

FRONT MOUNT

K5012 Fits: 39mm & 41mm Fork Tubes (set) K5014 Fits: 49mm Fork Tubes (set)

K5012

K5013 Fits: 39mm & 41mm Fork Tubes (set) K5015 Fits: 49mm Fork Tubes (set)

FRONT MOUNT

Note: When installing Clamp-On Fork Mounted Driving Lights with AirMaster Quick Release Windshields: • 41mm Wide Glides can choose either Front or Side Mount styles • 39mm Narrow Glides can use only Front Mount style To simplify wiring & avoid overloading the motorcycle’s running light circuit, we recommend using one of our wiring & relay kits - P/N K2328 or 2202 (below).

K5013

K5014

UNIVERSAL WIRING & RELAY KIT When using Halogen Silver Bullets as additional driving lights, we strongly recommend wiring them separately to avoid overloading the headlight circuit. Switch, relay, universal wiring harness & installation instructions included. Not intended for any particular application, but is easily adaptable to any motorcycle.

K2328 Universal Wiring & Relay Kit (ea)

K5015

DOUBLE ROCKER SWITCH Looking to add accessories to your Electra Glide, Road Glide, or Street Glide but don’t have a switch or all your switches are used up? This unique & exclusive switch incorporates two independent rockers & fits right in place of an original equipment switch. Each side of the switch operates independently & handles up to a 15 amp load. The rockers are black & match the rest of your original equipment switches perfectly. Fits: ’96 and up Electra Glides, Road Glides, Street Glides, & Trikes

K2201 Double Rocker Switch (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

105

ENGINE GUARD MOUNTED DRIVING LIGHTS If you ride at night, these are a must have. Featuring 3” DOT approved lights & 1-1/4” clamps, they bolt on with ease & have what it takes to penetrate through the night. Can be wired to accessory switch for Electra Glide, Road Glide, & Street Glide models. For Softails, Dynas, & Sportsters we recommend our 2202 or 2328 wiring relay kits. Fits: 1-1/4” Engine Guards on H-D & other motorcycles

K5019 Engine Guard Mounted Driving Lights (pr) Note: Not compatible with Fairing Lowers.

M O U N T O N TO P O F E N G I N E G U A R D O R B E LO W

FRAME MOUNTED DRIVING LIGHTS These luminous lights use a 3" diameter streamlined housing with super white H3 bulbs that provide extra light where it's needed most. Light can be mounted virtually anywhere on the down tubes & can be adjusted with ease. Increase your visibility to others without compromising the style & function of your ride.

K5016 For 1-1/8" & 1-1/4" Diameter Tubes

Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings without fairing lowers, ’86 and up Softails, ’91-’05 Dynas (lower section of down tubes), & ’86-’03 Sportsters

K5017 For 1-3/8" & 1-1/2" Diameter Tubes

Fits: ’09 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes without fairing lowers, ’06 and up Dynas, ’91-’05 Dynas (upper section of down tubes), & ’04 and up Sportsters

Note: To simplify wiring & avoid overloading the running light circuit, we recommend using one of our wiring & relay kits, P/N K2328 or 2202 (below).

UNIVERSAL DRIVING LIGHT WIRING RELAY KIT Our new Wiring & Relay Kit makes it easy to wire your new Küryakyn driving lights the right way. Eliminate the risk of overloading & damaging existing circuits on your bike by adding this independent circuit. A super-clean handlebar mounted push-button switch makes it easy to power-up your lights whenever they’re needed. Fits: Universal 12V applications for motorcycles with 7/8”, 1”, or 1-1/4” handlebars

K2202 Universal Driving Light Wiring & Relay Kit with Handlebar Mounted Switch (ea)

106

L.E.D. ACCENT LIGHTING

LONG LIZARD® LIGHTS Get a smooth, even glow without the spotlighting of pod style L.E.D.’s! Our 8” flexible, low profile L.E.D. lighting strips offer a wide range of applications & mounting options. Includes two 8” lights with 12 sevencolor L.E.D.’s per light for the perfect fit under most H-D & Metric tanks & saddlebags. Simple plug-&-play wiring makes installation easy.

K5025 Long Lizards Expansion Kit (ea) Note: Long Lizard Lights do not come with a controller (P/N K4715) & will flex to a maximum 10” radius.

PICK ONE COLOR OR ALL SEVEN!

M A K E S A G R E A T S T A RT E R K I T BY P U RC H A S I N G A LIGHT CONTROLLER

M A K E Y O U R B I K E A S H O W- S T O P P E R

( P / N K 4 715 ) O R A D D T O

NOW 30% BRIGHTER THAN PREVIOUS!

L I Z A R D L I G H TS S E T U P !

YO U R EX ISTI N G S U P E R

INFINITY ™ TIMING COVER

U.S. Patent 7,029,152

Let this cover take you to infinity & beyond with it’s 7-color L.E.D. spectacle of lights. This truly unique cover comes to life from its mirrorlike chrome resting state to a virtual vortex of lights once ignited. Make all your friends envious of this one-of-a-kind cover! Fits: All ’84-’99 Evolution Big Twins & all ’99 and up Twin Cam Engines

K1301 Infinity Timing Cover (ea) K4715 Replacement Switch/Controller (ea) K4768 250V/3 Amp Fuse (pr)

7-COLORS

IN ONE!

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

107

OFF

7-COLORS IN ONE!

ZOMBIE™ INFINITY ™ HORN COVER U.S. Patent 7,029,152 Gaze into the face of the Zombie. You’ll see a world beyond paint or simple chrome. The amazing infinity effect uses multi-color L.E.D.’s to give the chrome skull’s eyes & nose endless depth while illuminating steadily, flashing, or continuously fading through an array of colors at any frequency you desire. Use the included controller or connect to other Infinity or Lizard Light accessories. Fits: ’92 and up H-D Models with stock cowbell horn cover

K7719 Zombie Infinity Horn Cover (ea)

C H A S I N G

L . E . D . ’ S S I M U L AT E S PA R K T R AV E L !

CHASING L.E.D. COIL COVER FOR SOFTAIL

U.S. Patent D594,790

Add visual excitement to your H-D’s thunder as you watch the illusion of energy exploding from the coil to the spark plug wires in time with engine speed. Choose from seven colors or have the colors continuously morph from one to the next. If desired, the L.E.D. display can also be lit constantly with the same color options. Fits: All ’01 and up Fuel Injected Softail Models (except Rocker/C & FXS)

K1563 Chasing LED Coil Cover (ea) K1303 Replacement Switch (ea) K4768 250V/3 Amp Fuse (pr)

OFF

7-COLORS IN ONE!

SUPER LIZARD® LIGHT COMPONENTS & ACCESSORIES Note: Super Lizard Lights are not compatible with previous generations of Küryakyn Accent Lighting.

K4715 Super Lizard/Lizard Light Switch Controller (ea)

K4712 K4716 K4717 K4718 K4719 K4720

108

“Y” Connector (pr) Double Male Connector (pr) Double Female Connector (pr) 3” Extension Wire (pr) 6” Extension Wire (pr) 9” Extension Wire (pr)

K4721 K4722 K4723 K4728 K4768

12” Extension Wire (pr) 18” Extension Wire (pr) 24” Extension Wire (pr) Replacement Adhesive Pads (set/6)

250V/3 Amp Fuse (ea) Disclaimer: Laws & enforcement of laws pertaining to auxiliary lighting vary from state to state. If you are concerned about your area, we encourage you to check with your local authorities before making your purchase.

FOUR L.E.D. ACCENT LIGHTS

Use as accent lights or auxiliary turn signals. Chrome housing is 1-1/2” L, 3/4” W, & 1/2” T with two screw holes. Each light has two 6” wire leads that can be spliced into any 12v circuit.

K4702 Red (ea) K4703 Amber (ea)

INFINITY ™ COVER FOR STOCK TWIN CAM AIR CLEANER

7-COLORS IN ONE! U.S. Patent 7,029,152

Be transfixed by the mirage of dazzling L.E.D.’s in our Infinity Cover! Few things draw more attention.

7-COLORS IN ONE!

Fits: Stock ’99-’06 Twin Cam Air Cleaners—Includes switch & all wiring

K8416 Infinity Cover (ea) K4715 Replacement Switch/Controller (ea) K4768 250 V, 3 Amp Fuse (pr) Note: ’07 and up Twin Cams with standard, single-screw oval air cleaner cover can be outfitted with an ’06-earlier H-D outer cover, H-D P/N K29121-01, which will allow installation of P/N K8416.

INFINITY ™ STREAMLINER FOR STANDARD HYPERCHARGER

U.S. Patent 7,029,152

Take advantage of these spectacular illusions, it is definitely the first of their kind. Throw the switch & these covers are instantly transformed. The smooth, mirror finished outer panels become a vortex of lights. Installs quickly & easily - in under an hour! L.E.D. technology means there is no need to worry about draining your bike’s battery (provided the battery is in good condition & the lights are not left on for more than a couple hours). Get out there, the crowds are waiting!

OFF

Fits: Standard Hypercharger only—Includes switch & all wiring

K8415 Infinity Streamliner (ea) K4715 Replacement Switch/Controller (ea) K4768 250 V, 3 Amp Fuse (pr)

INFINITY™ SADDLEBAG LATCHES U.S. Patent 7,029,152

You’re going to have to see this to believe it. Multi-function L.E.D.’s emit red, lime, ice blue, sky blue, dark blue, purple & green with the illusion of infinite depth. Complete kit includes everything you need; latch bodies, wiring, & the controller. Stock lock assemblies are retained. Alone or combined with other Infinity & Super Lizard lighting kits, the impact is indescribable. Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags

7-COLORS IN ONE!

K1568 K4715 K4768

Infinity Saddlebag Latches (pr) Replacement Switch/Controller (ea) 250V/3 Amp Fuse (pr)

REMOTE CONTROL FOR LIZARD ® LIGHTS

& INFINITY™ PRODUCTS

Upgrade your new or existing Lizard Lights or Infinity Covers to be controlled by a compact remote control. The remote control allows you to turn the lights on & off; select steady-on, flash, or paint mode; & adjust rate-of-flash or rate-of-change in paint mode. Each kit includes switch receiver & one remote control. Replacement remote control units are available separately but only one remote can be programmed to a switch receiver at a time. Fits: All Küryakyn Lizard & Infinity Products

K4799 Remote Control (ea) K1305 Replacement Remote Control (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

109

ENDLESS OPTIONS FOR ACCENT

LIGHTING!

K5042

SKINNI MINI™

ULTRA BRIGHT L .E .D. STRIP LIGHTS

RED & AMBER

WHITE

Captivate your audience coming or going! These dazzling L.E.D.’s are great for mounting along fender lines, saddlebags, under body lines - virtually anywhere! These full light strips are 19” long & can also be cut down for custom applications.

Be the first to bring that high-end sports car look to your ride! Our new piercing, brilliant-white L.E.D. strips add the perfect accent to your headlight area or motor that you’ve been looking for. Their small size & super flexibility let you wrap these 22” strips just about anywhere you envision. Great for accents around headlights, along fairing edges, above motors or cut them down for other custom applications.

Dim: 19” Long x 3/16” Wide x 1/16” Thick - Single Circuit Side Projection L.E.D.’s Note: Skinni Mini’s do not coordinate function with Panacea Taillights.

K5042 Skinni Mini L.E.D. Strip Lights - Red (pr) Fits: Universal for Rear Applications

K5044 Skinni Mini L.E.D. Strip Lights - Amber (pr)

Dim: 22” Long x 3/16” Wide x 1/16” Thick - Single Circuit Side Projection L.E.D.’s

K5041 Skinni Mini L.E.D Strip Lights - White (pr) Fits: Universal Applications; (Headlights, Fairing Edges, under Gas Tank)

Fits: Universal for Front or Rear Applications

K5043 Skinni Mini L.E.D. Strip Lights - White (ea)

B LU E

Fits: Universal Applications; (H-D or Universal 7” headlight or headlamp area)

K5047 Skinni Mini L.E.D Strip Lights - Blue (pr)

Fits: Universal for Custom Accent Applications

K5043

110

K5042

ACCESSORY MOUNTS

DRINK HOLDERS K1487 K1500

K1459

K1486

BEVERAGE CARRIER

SNAP-N-GO™ DRINK HOLDER

Upgrade your Universal Drink Ring to accept most cups, cans or bottles. Easy on, easy off snap design that is also collapsible for storage. Made from PVC leather & works with any “ring” style drink holder.

Even if you’re wearing a full set of leathers you still shouldn’t ride with a cup of hot coffee between your legs. These affordable drink holders mount on either the clutch or brake perch mounts or a 1” bar. With secure snap-on mounting, simply "snap-N-go" to install or remove! When removed it leaves an unobtrusive stud on your perch or a small clamp & stud for universal bar application. Select the drink holder style you desire & ride with the plush comforts you deserve.

K1459 Beverage Carrier Only (ea) BEVERAGE CARRIER PLUS MOUNT

Need the whole package...something to hold your drink & the mount? Choose from the options below & you’ll be set.

K1460 Snap-N-Go Drink Ring with Beverage Carrier (ea) Fits: Universal Perch Mount or 1" Bar Applications

K1488 Universal Drink Ring for 1” Bar with Beverage Carrier (ea) K1489 Universal Drink Ring for 1-1/4” Bar with Beverage Carrier (ea)

K1500 Universal Drink Ring with Beverage Carrier (ea)

Fits: All ’82 and up H-D Model Clutch or Brake Perch Mounts

Fits: All ’82 and up H-D Models (Includes 1" Bar Mount & Perch Mount)

K1486 Snap-N-Go with Stainless Steel Mug (ea) K1487 Snap-N-Go with Universal Basket (ea) K1469 Replacement Stainless Steel Travel Mug (ea) Note: P/N K1487 accepts beverage containers from 2-3/8” to 3-1/2” in diameter. Clutch Perch & 1" Bar Clamp Mount included I N C LU D ES 1 " B A R M O U N T & P E RC H M O U N T !

K1485

K1482

K1493

PASSENGER DRINK HOLDER FOR ULTRA CLASSIC

PASSENGER DRINK HOLDERS

Patent Pending

FOR GRAB RAILS

Now you & your passenger can go the extra miles! These non-intrusive & easy to reach drink holders are ready for your favorite beverage. Chrome-plated to be durable & made to last.

There’s nothing better than a hot cup of coffee on a cold morning or an ice-cold bottle of water on a hot summer day. Fasten securely to passenger grab rails & are offered in 2 styles.

Fits: ’98 and up FLHTCU, ’10 and up FLHTK, ’11 and up FLTRU, ’08 and up FLHTCUSE, ’11 FLTRUSE, & '09 and up FLHTCUTG

K1482 Passenger Drink Holder w/Basket - Right Side (ea) K1689 Passenger Drink Holder w/Basket - Left Side (ea) K1493 Passenger Drink Holder w/Stainless Mug - Right Side (ea) Note: Will also fit other ’98 and up Touring Models if equipped with Accessory Rear Speaker Kit.

Fits: 1/2” diameter passenger grab rails on Electra Glides, Tour Glides, & Trikes universally on any 1/2”, 5/8”, or 3/4” tubing

K1484 K1485

With Basket (ea)

With Stainless Mug (ea) Note: For Replacement Cups & Baskets see pg 112.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

111

UNIVERSAL DRINK HOLDERS

K1422

Bring your beverage with you on those hot or cold days! Mount your drink holder either on your handlebars or your clutch or brake perch mounts. The quick detach thumb screw mount leaves a simple clamp when not in use. Choose either the Universal Basket Holder or Stainless Mug with Mounting Ring to hold your beverage. WITH BASKET

K1422 Fits: 1” Bars (ea) K1475 Fits: 1-1/4” Bars (ea) K1462 Fits: All ’82 and up H-D Model Clutch or Brake Perch Mounts (ea)

K1429 Replacement Basket for Drink Holder (ea)

C H O O S E A S TA I N L E S S S T E E L M U G O R A B AS K E T -T H E N C H O OS E TO M O U N T TO B A RS O R P E RC H M O U N TS !

WITH STAINLESS STEEL MUG

K1464 Fits: 1” Bars (ea) K1477 Fits: 1-1/4” Bars (ea) K1463 Fits: All ’82 and up H-D Model Clutch or Brake Perch Mounts (ea)

K1469 Replacement Stainless Steel Travel Mug (ea) Note: Universal Basket Holder accepts most average sized cups, cans, bottles & mugs with a 2” to 3 1/2”diameter.

112

K1463

A C C E S S O RY C L O C K S & GAUGES A A

K6047

H C

F G

D E

WHITE ELECTROLUMINESCENT FACE OFFERED ON SELECT STYLES!

A. RITCHIESPORT® RT COMPASS WITH

MARLIN'S MOUNT

• Marlin’s Brake/Clutch or Handlebar Mount Kitted with a RitchieSport® Compass • Compass Molded in High Impact/High Temp Black Composite • 2” Direct-Reading, High Visibility Dial • Removable Internal Green Night Lighting • Hardened Steel Pivot & Sapphire Jewel Movement • Built-In Compensators

C. MARLIN’S BRAKE/ CLUTCH MOUNT

• Fits H-D & most Metric bikes (may require a spacer) • Great for windshields or any location with 1/4” (or 6mm) screw • Head swivels for fine tuning position & locks when tightened (clock/thermometer face can be rotated in the housing)

F. MARLIN’S BULLET BILLET • Split mount for easy installation • Requires 2” of straight handlebar for installation (Recommended 3” from bends) K6036

Clock for 1” or 7/8” Bars, Black (ea)

K6037

Clock for 1” or 7/8” Bars, Electroluminescent (ea)

K6038

Thermometer for 1” or 7/8” Bars, Black (ea)

K6032 Clock, Black (ea) K6033 Clock, Electroluminescent (ea) K6034 Thermometer, Black (ea) K6035 Thermometer, White (ea)

G. MARLIN’S HANDLEBAR MOUNT • Mounts to 1” or 7/8” bars (clear plastic isolator included for 7/8” applications)

K6043 For 7/8" or 1" Bars (ea)

D. MARLIN’S TOCS

• Split ring mount for easy installation

K6045 For 1-1/4" Bars (ea)

• Infinite places to mount – use included double sided tape or use the mounting hole to screw in place

• Clock head rotates & swivels to adjust to any position

K6047 For Brake/Clutch Mount (ea)

IMPORTANT: NOT FOR USE ON MOTORCYCLES WITH RADIOS, SPEAKERS, OR STRONG MAGNETIC FIELDS.

B. MARLIN’S TALON MOUNT

• Includes 1/4”-20 screw for Road King tank panel • Great for windshield & handlebar bag installation K6044 Clock, Black (ea)

K6028 Clock, Black (ea) K6029 Clock, Electroluminescent (ea)

K6030 Thermometer, Black (ea) K6031 Thermometer, White (ea)

K6046 Thermometer, Black (ea)

H. MARLIN’S FORK

E. MARLIN’S FORK STEM

K6052 Clock, Black (ea)

COVER CLOCK

• Flip-top head opens for access to fork lock mechanism

K6053 Clock,

• Takes the place of the factory fork stem bolt cap

• No key modification required - Easy installation

K6054 Thermometer,

• Fits: ’91 and up Softails (except Springer Models), ’93-’05 Dyna Wide Glide, & all ’06 and up Dyna Models

• Keeps “lock/unlock” wording under the unit

• Mounts to 1” or 7/8” bars • Non-marking, soft tipped hidden set screw

Electroluminescent (ea) Black (ea)

K6055 Thermometer, White (ea)

LOCK FLIP FOR ROAD KING

K6048 Clock, Black (ea)

• Fits all ’94 and up Road King Models K6040 Clock, Black (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

113

DEVICE MOUNTING SYSTEMS TM

System E A S I LY M O U N T & S E C U R E A N I P H O N E , I P O D , S MARTP H O N E , G PS O R S MALL D E VI C E TO YOU R H A N D L E B A RS I N J U S T S E C O N D S . A N A DJ U S TA B L E SWIVEL HEAD ALLOWS MOVEMENT FOR PERFECT POSITIONING & DISCONNECTS IN SECONDS! WE O FFE R CO M P LE TE K ITS ; RE ADY WITH ALL YOU N E E D TO " M OU NT & G O " AS WE LL AS

K1699

I N DIVI DUAL CO M PO N E NTS SO YOU C AN C H OOS E T H E S E T U P T H AT ' S B E S T FO R YO U. S E E B E LOW FO R E A SY-TO - O R D E R I N S T RU C T I O N S .

A&B

K1697

K1699

Black Pivot Plate

B&C

Black Mount

Chrome Mount

K1698

PERFECT FOR IPHONE!

COMPLETE KITS

ORDER COMPONENTS

Patent Pending

Includes: Standard Tech-Connect Device Holder & Standard Accessory Mount. Fits devices measuring 1-5/8” to 3-5/8” wide. K1699

Fits: 7/8", 1" & 1-1/4" Handlebars (kit)

K1698

Fits: ’82 and up H-D Model Clutch or Brake Perch Mount (kit)

K1697

Fits: Fairings; '96 and up Electra Glide, Street Glide, & Trike (kit)

DETER MINE MOUNTING LOCATION SELECT ACCESSORY MOUNT SELECT DE VICE HOLDER

MOUNTING LOCATION

Choose One Location

1. FA I R I N G M O U N T 4

2.CLUTCH OR BR AKE PERCH MOUNT 2

3.BAR MOUNT 4 .W I N DS H I E L D M O U NT

114

1. 2. 3.

(R I GHT)

(R I GHT & PG 116 -117 )

ACCESSORY MOUNT

Choose A, B, C, or D

QUICK DETACH!

A. STANDARD - Black Pivot Plate & Black Mount (Mounting Plate 2-3/8" x 1-7/8")

K1671 Handlebar Mount - Fits: 7/8", 1" & 1-1/4" bars (ea) K1672 Clutch or Brake Perch Mount - Fits: ’82 and up H-D Models (ea)

ACCESSORY MOUNTS Use these mounts as the base to hold your favorite electronic device or gadget. Designed specifically to mount the Tech-Connect, Tech-Connect Pouch, Ram Device Holder or any other device with an AMPS 4 hole mounting pattern. Quick detach as well as an adjustable swivel head for perfect positioning.

C. P R E M I U M

K1673 Fairing Mount - Fits: ’96 and up Electra Glide, Street Glide, & Trikes K1674 Windshield Mount - Fits: 88 and up Heritage Softail Classic, ’94 and up Road King; Universal for most H-D & aftermarket fairings using a 1/4" or smaller fastener for windshield straps

B. PREMIUM CHROME - Black Pivot Plate & Chrome Mount (Mounting Plate 2-3/8" x 1-7/8")

K1677 Handlebar Mount - Fits: 1” bars (ea) K1678 Handlebar Mount - Fits: 1-1/4” bars (ea) K1679 Clutch or Brake Perch Mount - Fits: ’82 and up H-D Models (ea)

– XL CHROME

I N C LU D E S A L L F E AT U R E S F RO M

C. PREMIUM - XL CHROME - Large Chrome Pivot Plate &

ABOVE, PLUS AN ALL CHROME,

Chrome Mount. Hook & Loop Straps Included. Accepts Most Belt Clips.

L A R G E 2-1/ 2 ” W I D E X 3 - 3 / 4 ” TA L L M E TA L

K1680 Handlebar Mount - Fits: 1” bars (ea)

P I VOT P L AT E T H AT O F F E RS

K1681 Handlebar Mount - Fits: 1-1/4” bars (ea)

C K1680

K1682 Clutch or Brake Perch Mount - Fits: ’82 and up H-D Models (ea)

ADDITIONAL

K1683 Mounting Plate Update - Fits: Existing Universal Accessory

SLOTS &

Mounts - K1415, K1420-21, K1472-74, & K1468 (ea)

ACCEPTS

D. ECONOMICAL

S TA N DA R D

D K4109

Fits: Cut to fit tubing, square rails & irregular shapes from .5”-2.5” diameter ”-2 5” in diame

B E LT C L I P S

K4109 RAM EZ-Strap™ Mount (ea)

Note: Not for mounting Accessory Pouches & not Quick Detach.

DEVICE HOLDER

K1693

TH E M OST S EC U RE U N IVE RS A L H O LD E R ON THE MARKET

Choose E or F

• Dual Screw Clamping to Quickly & Securely Hold Device

Patent Pending

Requires Accessory Mount for installation. Sold separately - Above

• Integrated Rubber Pads for No Slip

K1693 Standard Device Holder (ea)

Fits devices measuring 1-5/8” to 3-5/8” wide (Perfect for iPhone)

PERFECT FOR IPHONE!

K1694 Large Device Holder (ea)

Fits devices measuring 3-5/8” to 6” wide

F. RAM® Hold your GPS or devices with Ram’s model specific cradles or universal holders. Requires Accessory Mount for installation. (Sold separately-Above)

K4106

K4105 K4104

K4107

K4104 Fits: Garmin Nuvi 200 Models (ea) K4105 Fits: Garmin Nuvi 300 Models (ea) K4106 Fits: TomTom XL 300 Models (ea) K4107 Universal Spring Loaded Device Holder

Fits devices 2-3/8" to 3-3/8" wide by 4-3/4" to 6-1/4"

K4098 Fits: Garmin Nuvi 1300 Models (ea) K4099 Fits: Garmin Nuvi 1400 Models (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

115

K4195 K4195

K1479

K1478

ACCESSORY POUCHES Take your pick; we have the perfect size holder for just about any type of handheld gadget. Their large, clear viewing window makes for easy reading of LCD screens on the fly & allows for full use of touch screen devices. Whether it be a cell phone, MP3 player, or portable GPS, rest assure that your device will be secure & easily accessible. Quick Detach mounting.

Q U I C K D E TA C H S T R A P

H O L D S S TA N D A R D E-Z PASS!

Fits: Universal for 3/4” to 1-3/4” Bars (Also mounts to Universal Accessory Mounts; Step #2 - pg 115)

K1478 Small (ea)

(3-1/2” Tall, 2-1/4” Wide, 3/4” Deep)

K1479 Large (ea)

(4-1/2” Tall, 3-1/4” Wide, 3/4” Deep) Note: Holds standard 3-1/2" x 3" E-Z pass.

XTRA L A RG E V E RS I O N I N C LU D ES FO A M PA D TO S E C U R E LY F I T E V E N SMALL DEVICES

K4195 Xtra Large (ea)

(4-1/4” Tall, 6-1/4” Wide, 3/4” Deep)

USB POWER SOURCE

K1479

ACCESSORY MOUNT KITS

Charging your device just got even easier. Featuring two USB ports & 2.1a output to provide enough output for charging any modern device including iPads. Mount anywhere you choose including inside your tour pack, on the dash, or on your handlebars. Fits: Universal - Requires 1” x 1” flat surface or 1” of straight 1” bar for mounting (Connects directly to battery with in line fuse) WO R KS G R E AT W I T H FAT C AT ACC ES SO RY C H A RG E R

Just need the mounting hardware for your accessory or drink holders? Clutch or Brake Perch Mounting or bar mounting

K1472 K1420 K1468 K1415

Clutch or Brake Perch Mount Kit (ea) Fits: ’82 and up H-D Model Clutch or Brake Perch Mounts

5/16”

Fits: 1” Bars (ea) Fits: 1-1/4” Bars (ea) Fits: 3/4”, 5/8”, & 1/2” Bars (ea)

13/16” 1/2”

K1688 USB Power Source (ea) Rendering Shown

FAT CAT ACCESSORY CHARGER INCLUDES MOUNT FOR 1" HANDLEBARS

GREAT FOR CHARGING IPHONES, IPODS, CELL PHONES, GPS’, OR ANY DEVICE WITH STANDARD USB CONNECTION

116

Now you can charge just about any electronic device from your electrical power point. Featuring two USB ports, one with 1A & one 2.1A of output, to charge multiple devices such as an iPhone, iPod, GPS, Droid, & even an iPad! Fits: Universal - Plugs into cigarette lighter Will charge iPhones & most current cellphones & devices

K891 Fat Cat Accessory Charger

EZ PASS HOLDER

Pouch

An easy-to-attach device that will securely hold an I-Pass™, E-Z Pass™ or other tollway transponders to a motorcycle without obstructing the rider's view or grip. Can be mounted to handlebars, perches, engine guards or windshields using additional hardware & clamps (sold separately). Fits: Universal for mounting to top clutch or brake perch bolt, windshield strap mounting bolt - Mounts with P-Clamp (pg 97) (Requires additional 1/4-20 bolt for mounting w/P-Clamp)

Note: Not suggested for mounting on clutch or brake perch with other accessories mounted in same location.

K1684 Chrome (ea) K1685 Black (ea)

Mount your iPhone or small touch screen device to your bike’s handlebars in just seconds! This pouch conforms to your device for a snug fit & features both audio & charging ports at the top & bottom. Choose P/N K4127 with a quick on & off rubber strap to fit most handlebars, or for a more precise placement choose P/N K4128 equipped with an Accessory Mount with Quick Disconnect capabilities & Pivot adjustment.

Prototype Shown

K4127 Tech-Connect Pouch - Mount with Rubber Strap

Fits: Universal 3/4" to 1-3/4" Bars (Also mounts to Universal Accessory Mounts; Step #2)

K4128 Tech-Connect Pouch - Mount with Accessory Mount K1685

Fits: 7/8", 1", & 1-1/4" Bars Note: Includes Standard Accessory Mount (P/N K1671 - pg 115).

I N C LU D ES FO A M PA D FO R S EC U R E F I T FO R

K1684

EVE N TH E S MA LLEST D EVI C ES

UPDATED PLATE ACCEPTS MORE DEVICES!

FUEL DOOR GPS/ ACCESSORY MOUNT FOR TOURING MODELS

This cleverly designed mount replaces the stock hinged fuel door to provide a stable & easily accessible place to mount a GPS, satellite radio or other electronic device. The swap only takes a few minutes. Adjustable bracket accepts almost any device that utilizes a cradle with the industry standard 4-hole AMPS pattern, RAM cradles & Küryakyn Accessory Pouches. Also accepts items like MP3 players, cell phones, or just about anything with a belt clip.

K1690 Fits: ’92-’07 Electra Glides, Road Glides, Street Glides & Tour Glides (ea)

K1691 Fits: ’08 and up Electra Glides, Road Glides, Street Glides, & Trikes (ea)

ELECTRICAL POWER POINT Perfect for plugging in your cell phone, iPod, GPS, air pump, or any other electrical device taken on the road. This power point/cigarette lighter will keep them charged. Built into our Silver Bullet light housing & comes with everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance & mount it below (shown in image right).

K1423

K1483

K1423 Fits: 1” Handlebars (ea) K1476 Fits: 1-1/4” Handlebars (ea) K1483 Fits: All ’82 and up H-D Model Clutch or Brake Perch Mounts (ea)

POWER AT YOUR FINGERTIPS!

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

117

GRIPS

ZOMBIE GRIPS PG

121

BR AIDED GRIPS PG

120

WIDOW ®GRIPS PG

123

ISO®-GRIPS

ISO®- FL AME GRIPS PG

118

119

BL AC K ISO®-GRIPS PG

119

BR AIDED GRIPS PG

120

BR AIDED GRIPS PG

120

PILOT GRIPS PG

TR ANSFORMER™ GRIPS

118

ISO®FLAME GRIPS Our ISO-Flame Grips have a unique flamed pattern in the soft & cushy raised rubber pads. Finished off with a Maltese Cross emblazoned end cap & smooth trim ring for that additional bad attitude. This grip accepts our wildly popular ISO-Throttle Boss, which greatly aids your hand on those long rides to the next rally. WITHOUT THROTTLE BOSS

K6260 Fits: ’82 and up H-D Models with dual cable throttle control (pr)

K6269 Fits: ’08 and up H-D Models with electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

118

120

PILOT™ GRIPS Comfortable raised rubber pads provide a secure grip area, while the chrome body adds a subtle accent to highlight other accessories. WITH THROTTLE BOSS

K6204 Fits: ’82 and up H-D Models with dual cable throttle control (pr)

WITHOUT THROTTLE BOSS

K6203 Fits: ’82 and up H-D Models with dual cable throttle control (pr)

K6229 Fits: ’08 and up H-D Models with electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

THROTTLE BOSS (FITS RIGHT OR LEFT)

K6252 Pilot Throttle Boss (ea)

K6252

ISO®-GRIPS

U.S. Patent D411, 432

For the rider who demands the ultimate in comfort & style! Styled to match the rest of our ISO-Series, they dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. One of the only custom grips available that may be used with stock air reservoir type handlebars.

K6212

K6299

PREMIUM ISO - GRIPS WITH CHROME ACCENT RINGS (WITH THROTTLE BOSS)

K6212 Fits: ’82 and up H-D Models with dual cable throttle control (pr) K6228 Fits: ’08 and up H-D Models with electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

ISO - GRIPS WITH CHROME ACCENT RINGS (WITHOUT THROTTLE BOSS)

K6205 Fits: ’82 and up H-D Models with dual cable throttle control (pr) K6227 Fits: ’08 and up H-D Models with electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

K6321 with K6318 K6318

THROTTLE BOSSES

K6250 K6253 K6319 K6299

ISO-Throttle Boss – Right or Left, Chrome (ea) ISO-Throttle Boss – Right or Left, Chrome (pr) ISO-Throttle Boss – Right or Left, Black (ea) Contoured ISO-Throttle Boss – Right Side, Chrome (ea)

BLACK ISO - GRIPS

K6320 Fits: ’82 and up H-D Models with dual cable throttle control (pr)

K6321 Fits: ’08 and up H-D Models with electronic

throttle; All ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, Trikes, & ’11 and up FLSTSE (pr)

K6309 Contoured ISO-Throttle Boss – Left Side, Chrome (ea)

K6318 Contoured ISO-Throttle Boss – Right Side, Black (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

119

TRANSFORMER™ GRIPS U.S. Patent D631,725

Transform the look & feel of your ride! Bright chrome grip bodies & sculpted end caps provide a solid feel while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any theme series already used on your bike with interchangeable Widow, Zombie or Maltese Cross Emblems. INTERCHANGEABLE EMBLEMS

K6291 Fits: ’82 and up H-D Models with dual cable throttle control (pr)

K6293 Fits: ’08 and up H-D Models with

electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

COMPONENTS

K6294

Fits: Transformer, ISO-Grips & ISO-Flame Grips

K6365 Replacement Emblem Kit K6364 Smooth Accent Rings for Transformer Grips (pr)

K6364

BRAIDED GRIPS

K6294 Transformer Throttle Boss (ea) Fits: Left or Right Grip K6289 Replacement End Caps (pr)

U.S. Patent D648,204

Get the custom look that works! Grips are made from a soft synthetic rubber that provide exceptional comfort that’s made to last. Available in three color combinations & are designed to work with all four-screw grip accessories that fit Küryakyn ISO-Grips. FOR ’82 AND UP H - D MODELS WITH DUAL CABLE THROTTLE CONTROL

K6330 Black & Black (pr) K6331 Black & Red (pr) K6332 Black & Blue (pr) FOR ’08 AND UP H - D MODELS WITH ELECTRONIC THROTTLE CONTROL ; ALL ’08 AND UP ELECTRA GLIDES, ROAD KINGS, ROAD GLIDES, STREET GLIDES, TRIKES & ’11 AND UP FLSTSE

K6333 Black & Black (pr) K6334 Black & Red (pr) K6335 Black & Blue (pr)

I N C LU D E S B OT H F L AT & POINTED END C APS

CHROME POINTED END CAPS FOR BRAIDED GRIPS

Fits: Küryakyn Braided Grips, ISO-Grips, & ISO-Flame Grips

K6336 Chrome Pointed End Caps (pr)

120

Note: Transformer Grips accept all grip end accessories except Accent Rings, Zombie & Widow Grip End Caps.

ZOMBIE™ GRIPS

U.S. Patent D560,463

Purely wicked! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. WITH THROTTLE BOSS

K6295 Fits: ’82 and up H-D Models w/dual cable throttle control (pr)

K6297 Fits: ’08 and up H-D Models w/electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

WITHOUT THROTTLE BOSS

K6296 Fits: ’82 and up H-D Models w/dual cable throttle control (pr)

K6298 Fits: ’08 and up H-D Models w/electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

COMPONENTS

K6286 Zombie Throttle Boss Kit (ea) Fits: Throttle Grip Only

K6281 Replacement Zombie End Cap Kit (ea)

Fits: Clutch Grip or Throttle Grip without Throttle Boss

K6278 Zombie Emblems (pr)

Fits: Grips with Throttle Boss

K6279 Zombie Emblems (pr)

Fits: Grips without Throttle Boss

WIDOW® GRIPS U.S. Patent D560,463 & D576,012

Our spider themed grips are a radical departure from the average. WITH THROTTLE BOSS

K6270 Fits: ’82 and up H-D Models w/dual cable throttle control (pr)

K6275 Fits: ’08 and up H-D Models w/electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11-'12 FLSTSE (pr)

WITHOUT THROTTLE BOSS

K6271 Fits: ’82 and up H-D Models w/dual cable throttle control (pr)

K6276 Fits: ’08 and up H-D Models w/electronic throttle control; All ’08 and up Electra Glides, Road Kings, Road Glides, Street Glides, Trikes, & ’11 and up FLSTSE (pr)

COMPONENTS

K6274 Widow Throttle Boss Kit (ea) Fits: Throttle Grip Only

K6277 Replacement Widow End Cap Kit (ea)

Fits: Clutch Grip or Throttle Grip without Throttle Boss

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

121

GRIP ACCESSORIES & THROTTLE ASSISTS A

A. HEAT DEMON GRIP WARMERS Ride comfortably year-round with Heat Demon Grip Warmers! With four settings & L.E.D. heat indicator lights you can set your ideal temperature on cold riding days. The sleek controller mounts to the left side clutch perch & features one-button control for easy, safe heat adjustment. Kit includes everything you need for a convenient, clean install. Fits: All ’82 and up H-D Models with 1” Handlebars including Touring Models with Electronic Throttle (except models with air reservoir in handlebars)

Relocates handlebar closer to the rider so the motorcycle becomes easier to steer & control while relieving pain. Bright chrome finish with individual stylish caps that allow accessory mounting between the risers. Offering 4” of rise & 1 ½” of pullback, these risers work with stock lines & cables on 1" handlebars.

K1735 Fits: Dynas, Softails & Sportsters (pr)

K6326 Heat Demon Grip

Important: Riser applications only work with OEM handlebars that have separate risers. Motorcycles with risers welded to handlebars will require new handlebars for installation.

K6327 Heat Demon Grip

D. GRIP END

Controller Mounts to Left/Clutch Perch

Warmers, Chrome

Warmers, Black Note: Aftermarket handlebars with electronic throttle must have a minimum 7/8” ID for proper installation.

B. SMOOTH STYLE PULLBACK RISERS

6-1/2" of meaty chrome-plated aluminum! Enough to satisfy the greatest hunger. Heavyduty top clamps for a complete customized look. Fits: ’00-’07 Deuce with 1” diameter bars

K1725 Smooth Style

Pullback Risers (pr)

122

C. KICKBACK RISERS

HELMET LOCK This trick little device adds both a locking helmet holder to the end of your grips as well as functions as a bar end weight to assist in stabilizing. Simply slide your helmet D-Ring into the slot or use the provided helmet lock extension & lock it in. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips, & Braided Grips

K6247 KewLock (ea) K6248 KewLocks (pr)

E. KNURLED ACCENT RINGS K6220 Chrome (pr) K6222 Blue (pr) K6223 K6224 K6225 K6226

Gold (pr) Purple (pr) Green (pr)

Black (pr) Note: Not for use with Transformer Grips.

F. SMOOTH ACCENT RINGS K6363 K6265 K6266

Chrome (pr) Red (pr) Blue (pr)

Note: Not for use with Transformer Grips. OPTIONAL LONGER SCREWS

Allows use of up to three accent rings (two if used with Throttle Boss).

K6219 Longer Stainless

Screws (set of 8)

G. ISO®-CAPS WITH LEATHER FRINGE Add a little flair to your ISO-Grips or Braided Grips with these top grade leather fringed end caps from Iron Braid. 16” fringe.

K6215 ISO-Caps with Black

Leather Fringe (pr) Note: Not compatible with air reservoir bars.

H K6346

K H I

K6245

K6243

J K6348

H. GRIP END WEIGHTS

J. ACCENTS FOR HEATED GRIPS

FOR KÜRYAKYN GRIPS

An easy & affordable way to revamp your stock heated grips! Outfitted with intricate notches, these accent rings are the perfect solution to the inconvenience & expense of replacing your entire grip. Die-cast aluminum construction offered in chrome or gloss black.

Few things can take the enjoyment out of a great ride like numb, tingling fingers. Küryakyn Grips are an excellent first step to keep vibration in check but now you can improve their legendary comfort even more! Grip End Weights quickly install on the end of each grip adding mass & length to further reduce high amplitude handlebar vibration. Their sculpted appearance & bright chrome finish also add a high-tech look to your already hot looking grips. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips, & Braided Grips

K6238 Grip End Weights (pr) K6339 Black Grip End Weights (pr) K6338 Grip End Weight (ea)

Fits: ’10 and up FLHTK Electra Glide Ultra Limited & any ’08 and up Touring Model or Trike equipped with H-D P&A Black Rubber Heated Hand Grips (P/N 56100034)

K6346 Chrome Accents (set/4pcs) K6348 Black Accents (set/4pcs)

K. STILETTO™ END CAPS Simple replacements for the existing end caps on Küryakyn ISO-, ISO-Flame, Transformer, or Braided Grips. Installation is a breeze. Screws supplied for use with or without Throttle Boss.

K6249 Stiletto End Caps (pr)

I. END CAPS

L. BULLET GRIP END FOR KÜRYAKYN GRIPS

Replacements for ISO-Grips or styling update for ISO-Flame, Transformer Grips, or Braided Grips. Includes screws.

Go farther & look better. Added weight enhances grip vibration damping qualities, while aggressive polished aluminum bullet style combines form with function. Mount with existing hardware.

K6243 ISO-Grip End Cap (pr) K6244 ISO-Grip End Cap (ea) K6245 Maltese Cross End Caps (pr)

Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips, & Braided Grips

K6239 Baron Bullet Grip Ends (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

123

ISO®-THROTTLE BOSSES™

The addition of a throttle boss can make the difference between a quick trip & a cross country adventure. Designed to relieve pressure from your palm, these little gems allow the rider to have a relaxed grip while cruising & add a whole new level of riding comfort. They’re simple to install & are easily adjustable to suit your needs. Fits: ISO-Grips, ISO-Flame Grips, Transformer Grips, or Braided Grips

A. CONTOURED ISO-THROTTLE BOSS K6299 Contoured ISO-Throttle Boss – Right Side, Chrome (ea) K6309 Contoured ISO-Throttle Boss – Left Side, Chrome (ea) K6318 Contoured ISO-Throttle Boss – Right Side, Black (ea)

B. ISO-THROTTLE BOSS K6250 ISO-Throttle Boss – Right or Left, Chrome (ea) K6253 ISO-Throttle Boss – Right or Left, Chrome (pr) K6319 ISO-Throttle Boss – Right or Left, Black (ea)

C. WIDE UNIVERSAL THROTTLE BOSS™ (XL) Enjoy your ride even more! Its simple wrap-around-your-grip system allows you to install & ride in no time at all, while still allowing you to have ease & control of your throttle. And with a larger size palm rest, you’ll gain more support under your hand.

Fits: Any application with a twist grip throttle

K6315 Wide Universal Throttle Boss (XL) (ea)

D. UNIVERSAL THROTTLE BOSS™

E. THROTTLE ROCKER

Designed to fit any type or size grip - Installs in seconds to provide a cushioned platform for your palm which allows you to vary or maintain a speed without keeping a tight grip on the throttle. Removes quickly.

Attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping tight grip on the throttle.

Fits: Any application with twist grip throttle

K6251 Universal

Fits: Any application with twist grip throttle

K6255 Right (ea) K6256 Left (ea)

Throttle Boss (ea)

F. CRAMP BUSTER CRUISE ASSIST Provides a way for comfortable throttle control & dramatically reduces the wrist fatigue often caused by long rides. Rotates forward all day long, yet when downward pressure is applied by your hand the throttle is regulated effortlessly & accurately without squeezing. NARROW

K6258 Fits: H-D & other 1” bars (ea) K6259 Fits: 7/8” bars (ea) WIDE

K6254 Fits: H-D & other 1” bars (ea) K6257 Fits: 7/8” bars (ea) NARROW

124

WIDE

Note: Use P/N’s K6258 & K6254 on grips with 1-7/16” to 1-3/4” outside diameter. Use P/N’s K6259 & K6257 on grips with 1-1/8” to 1-3/8” outside diameter.

MECHANICAL THROTTLE CRUISE ASSIST Enjoy those longer rides & relax your throttle hand with the Mechanical Throttle Assist. This is the simplest & cleanest looking throttle position holder available. Attaching to the end of your handlebars, this beauty looks like a bar end weight. Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the Clutch Side Bar End Weight for a matched pair & ride on in comfort.

Notes: • Does not fit ’08 and up Touring Models & Trikes or ’11 and up FLSTSE due to electronic throttle control. • Does not fit with internally wired heated grips or air reservoir handlebars. • Installation may require cutting or drilling a 5/8" hole in the end of the OEM grips. Handlebars must have open ends. • Not compatible with Küryakyn Throttle Bosses(Chrome or Black).

Fits: All H-D Models with 1” or 7/8” handlebars with hollow bar ends & OEM or Küryakyn ISO- & Transformer style grips (see notes)

K6285 Mechanical Throttle Cruise Assist (ea) K6288 Clutch Side Matching Bar End Weight (ea) EASY

& AFFORDABLE SOLUTION!

ELECTRO-MAGNETIC CRUISE ASSIST Give your wrist a rest. This push button Electro-Magnetic Cruise Assist is just the ticket. Just push a button to set... push the button again, touch the brakes, or pull in the clutch (on ’07-’11 Models) to cancel. Magnetic force holds throttle position steady, but is still easy to over-ride as necessary. Fits: ’96-’03 Sportsters; ’96-’11 Dynas; ’96-’10 Softails; ’96-’07 Electra Glides, Road Glides, Street Glides & Road Kings

K6280 Electro-Magnetic Cruise Assist (ea) Notes: Cannot be used on motorcycles equipped with Hydraulic clutches. Not compatible with Küryakyn Switch Housing Covers (P/N’s K7809, K7827, K7828) H O L D S T H ROT T L E I N C O N S TA N T P O S I T I O N & M A N U A L A D J U S T M E N T M AY B E N E E D E D I N C E RTA I N C I RC U M S TA N C E S OR CONDITIONS (HILLS, WIND, ETC).

CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST This is a must have for any rider who travels, bar none! Thanks to its ingenious design, the rider can lock the throttle simply by a ¼ turn of the lever, providing nearly double the vertical action when compared to the stock star wheel. Made from aircraft grade materials, durability is a cut above the rest. Thanks to the cleverly designed spring loaded spline, adjustments can be made on the fly. Fits: ’82 and up H-D Motorcycles (except '08 and up FLHR without cruise)

K6328 Cruise-Mate, Black (ea) K6329 Cruise-Mate, Chrome (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

125

CONTROL COVERS K7806

K7807

K1742

K7808

SWITCH HOUSINGS Whether this is the first piece or the last piece you’re adding to chrome your hand controls, this is a must-have with its smooth lines. These housings will accept stock ’96 and up H-D switches. Add our Chrome Brake & Clutch Control Dress-up Kit (right) that includes everything else you need to complete your family of chrome hand controls.

K7806 K1742 K7807

Fits the Following Models WITHOUT Cruise: ’96 and up FLHTC, ’06 and up FLHX, ’10 and up FLTRX, ’96-’09 FLHT, ’10-’11 FLHXXX (set)

K7808

Fits: ’96 and up VRSC, XL, XR, & FLHR (except ’03 FLHRSE); ’96-’10 Softail Models (except ’03 FXSTDSE), '96-'11 Dyna (set)

Fits the Following Models WITH Cruise: ’02 and up FLHTC, ’06 and up FLHX, ’10 and up FLTRX, ’02-’09 FLHT, ’10-'11 FLHXXX (set) Fits: ’96 and up FLHTCU, ’10 and up FLHTK, ’98-’09 FLTR, ’11 and up FLTRU, ’02 and up FLHRC, ’09 and up FLHTCUTG (set) Note: Will also fit ’02 and up FLHR if equipped with Cruise.

K7809

SWITCH HOUSING COVERS Enjoy these every time you’re in the saddle! Installation is a breeze -They go right over the stock switch assemblies. No disassembly. A perfect match when combined with our Chrome Handlebar Dress-up Kits.

K7809 Fits: ’96-’03 XL; ’96-’11 Dyna & FLHR (except ’03 FLHRSE), ’96-’10 Softails (except ’03 FXSTDSE)

K7827 Fits: Following Models WITHOUT

Cruise: ’96 and up FLHTC, ’06 and up FLHX, ’10 and up FLTRX, ’96-’09 FLHT

K7828 Fits: ’96 and up FLHTCU, ’10 and up

FLHTK, ’98-’09 FLTR, ’11 and up FLTRU, ’02 and up FLHRC, Will Also Fit the Following Models WITH Cruise: ’02 and up FLHTC, ’06 and up FLHX, ’10 and up FLTRX, ’02-’09 FLHT

K7828

126

Note: For best appearance, motorcycle must be equipped with Küryakyn Handlebar Control Dress-up Kits (P/N K9119 or K9126) or H-D Handlebar Reservoir Cover Sets (H-D P/N’s 46099-98 or 46098-98).

CHROME THROTTLE & IDLE CABLE COVERS It’s time to finish the job! Quick & easy Installation - Requires no disassembly. Fits: All ’82 and up Models with 90 degree cable elbows

K2027 Chrome Throttle & Idle Cable Covers (set)

CHROME BRAKE & CLUTCH CONTROL DRESS-UP KIT

K9126

An inexpensive, fast, & easy way to completely finish chroming your hand controls! The Clutch Perch is a complete chrome replacement unit that has been beefed up to complement the brawny look of an H-D. The Master Cylinder Cover dresses up the reservoir & covers the entire visible hand brake bracket assembly with a lush layer of glistening chrome. There are even chrome clamp halves & hardware accents for a 100% detailed, pure custom look.

K1740

Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings & '09-'10 Trikes without Reverse (set)

K1741

Fits: ’04 and up Sportsters (set)

K9119

Fits: Dual Disc-’96-’07 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings, ’96 and up Dynas, ’96-’03 Sportsters (set)

K9126

Fits: Single Disc-’96 and up Softails & Dynas, ’96-’03 Sportsters (set)

K1740

K9119

CLUTCH CABLE FERRULE COVER & BANJO BOLT COVER K2012 Clutch Cable Ferrule Cover (ea)

Fits: ’84 and up H-D clutch cables

K2014 Banjo Bolt Cover (ea)

Fits: ’84 and up H-D master cylinder & calipers (except ’08 and up Touring master cylinder & caliper, ’08 and up Softail & Dyna calipers & ’04 and up XL master cylinder & caliper)

K2016 Clutch Cable Ferrule Cover & Banjo Bolt Cover Combo (set)

Fits: ’84 and up H-D Models with stock master cylinder & calipers (except ’02 and up V-Rod, ’04 and up XL, ’08 and up Touring & any Models with hydraulic clutch)

THUMBNAIL® CURVE TURN SIGNAL BUTTON EXTENDERS

K2016

6193

Makes turn signal actuation simple for riders – even while manipulating clutch or brake controls. Peel-&-stick installation. Fits: All ’96 and up H-D Models (except ’11 and up Softails & '12 and up Dyna)

K6193 Black Thumbnail Curve (pr) K6194 Chrome Thumbnail Curve (pr)

EASE YOUR REACH TO THE TURN SIGNAL !

K6194

Note: Not compatible with Küryakyn Switch Housing Covers (P/N’s K7809, K7827, K7828).

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

127

LEVERS BOSS BL ADES ZOMBIE™

GLOSS BL AC K ZOMBIE™

TRIGGER SILHOUET TE BOSS BL ADES

(Adjustable Clutch)

BRAIDED GRIPS AVAILABLE!

REDUCED REACH!

TRIGGER LEVERS

SILHOUETTE LEVERS

BRAIDED LEVERS

Other levers won’t let your strongest fingers work. Our levers allow the forefinger to get a real grip, making it much more comfortable & easier to pull the lever. Your hands just fall naturally into place. If you’ve got small hands, these are a must.

U.S. Patent D432,470

Iron Braid's patented braiding process ensures leather lays flat against the lever & will not loosen over time.

K1021 Fits: ’82-’95 H-D Models (pr) K1029 Fits: ’96 and up H-D Models

with Cable Operated Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1056 Fits: ’08 and up Electra Glides,

Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr)

Note: When P/N K1029 is installed on an ’08 and up Softail or Dyna, the tip of the brake lever will be positioned approximately 3/8” farther from the bar than the stock lever.

128

Adds a really unique accent to any bike. Very comfortable on the hands.

K1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic clutch & '02-'05 V-Rod (pr)

K1024 Fits: ’82-’95 H-D Models (pr)

K1049 Fits: ’96 and up H-D Models

with Cable Operated Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1055 Fits: ’08 and up Electra Glides,

Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr)

Note: When P/N K1049 is installed on an ’08 and up Softail or Dyna, the tip of the brake lever will be positioned approximately 3/8” farther from the bar than the stock lever.

Fits: ’96 and up H-D Models with Cable Operated Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) SPOON- STYLE LEVERS WITH FRINGE

K21524 Black & Black (pr) K21534 Black & Red (pr) K21544 Black & Blue (pr) TRIGGER- STYLE LEVERS WITH FRINGE

K21523 Black & Black (pr) K21533 Black & Red (pr) K21543 Black & Blue (pr) TRIGGER- STYLE LEVERS WITHOUT FRINGE

K21753 Black & Black (pr)

ZOMBIE™ LEVERS

U.S. Patent D596,091

Brake away from the ordinary & clutch the gaze of onlookers with Küryakyn Zombie Levers. Comfortable contours & a dished back allow high leverage with minimal reach; a gripping addition to this popular collection. CHROME

K1047 Fits: ’96 and up H-D Models with Cable Operated

Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1058 Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr)

K1060 Fits: ’04 and up Sportsters (pr) K1492 Replacement Zombie Medallions (pr) Note: When P/N K1047 is installed on a ’08 and up Softail or Dyna the tip of the brake lever will be positioned approximately 3/8” further from the bar than the stock lever.

GLOSS BLACK

K1090 Fits: ’96 and up H-D Models with Cable

Operated Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1091 Fits: ’08 and up Electra Glides, Road Glides,

Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr)

K1092 Fits: ’04 and up Sportsters (pr) INCLUDES GROOVED & ZOMBIE EMBLEMS!

BOSS BLADES WITH ADJUSTABLE CLUTCH LEVER

BOSS BLADES Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion.

K1036 Fits: ’99-’06 Twin Cams with H-D’s Hydraulic Clutch & ’02-’05 V-Rod (pr)

K1038 Fits: ’96 and up H-D Models with Cable

Operated Clutch (except ’04 and up Sportsters & ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1057 Fits: ’08 and up Electra Glides, Road Glides,

Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr) Note: When P/N K1038 is installed on an ’08 and up Softail or Dyna, the tip of the brake lever will be positioned approximately 3/8” farther from the bar than the stock lever.

Our levers just got better! All the style & comfort of our Boss Blades with the addition of an adjustable clutch lever! Our unique design relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3/4" at the tip) without affecting clutch actuation.

K1080 Fits: ’96 and up H-D Models with Cable

Operated Clutch (except ’04 and up Sportsters, ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

K1093 Fits: '04 and up Sportster (pr) Note: Installer is responsible for ensuring proper clutch disengagement when these levers are installed. Clutch & clutch cable must be correctly adjusted & installer must verify grip diameter does not adversely affect clutch operation.

THE ANSWER FOR RIDERS WITH SMALL HANDS!

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

129

MIRRORS

SKELETON HAND MIRRORS

COMING THIS SEASON!

Now you can enlist your own creepy skeleton hand to hold your mirror head in perfect position! The detailed arm bone stem and skeleton hand look amazingly realistic with the wrist joint providing smooth and sturdy mirror adjustment. Choose the all-black set or the set with chrome arms & black mirror heads. Includes hardware for a variety of H-D mounting applications.

K1758 Black Stem with Black Head (pr)

1758

K1759 Chrome Stem with Black Head (pr)

SCYTHE™ MIRRORS K1449

Dare to slice through the h wind i d with i h the h finest fi example of cutting edge mirrors. The Scythe & Scythe II Mirrors feature a Rambo Knife shaped mirror head that provides a sleek streamlined profile with smooth operating swivels for easy adjustment. All mounting hardware included.

K1449 Chrome Scythe Mirrors (pr) K1760 Gloss Black Scythe Mirrors (pr) K1448 Scythe II Mirrors (pr)

K1448

Note: Not recommended for Buckhorn handlebars.

K1760

ELLIPSE™ MIRRORS These state of the art custom mirrors are cut from the same mold as our Turn Signal Mirrors but they don't have the running light & turn signal functions. Available with flat or convex glass & feature an oversized swivel ball for superior locking ability. Hardware for a variety of H-D mounting applications is included.

K1437 K1438 K1433 K1436

Ellipse Mirrors with Flat Glass (pr) Ellipse Mirrors with Convex Glass (pr) Replacement Flat Glass with Bezel (ea)

Replacement Convex Glass with Bezel (ea) Note: Not recommended for Buckhorn handlebars or’04 and up XL Models.

MALTESE CROSS MIRRORS For your chopper lifestyle! Bezel is easily removed to access & adjust the tension mechanism if necessary. Hardware for a variety of H-D mounting applications is included.

K1425 Maltese Cross Mirrors (pr) Note: Not recommended for Buckhorn handlebars.

BEFORE

AFTER

MIRROR STEM EXTENDERS Extend stock mirrors outward about 3” & only slightly upward with these uniquely angled, chrome-plated mirror stem extenders. The extenders fasten to handlebars exactly like stock mirrors & re-use acorn nut or turn signal mounting swivel. Fits: Stock H-D Mirrors with Round Steel Stem

K1444 Mirror Stem Extenders (pr)

130

ZOMBIE™ MIRRORS We’ve taken your run-of-the-mill skull & added 35% more angst & 20% more anguish to make these the nastiest mirrors on the street. Overall, the mirror head is about 3” x 4” with round glass 3” in diameter. The smoothly arched stem positions the center of the mirror head about 4-3/8” above & 5-1/2” outboard of the mounting point on the handlebar control. Hardware for a variety of H-D mounting applications is included.

K1450 Zombie Mirrors (pr) K1451 Replacement Knurled Screws (ea) Note: Not recommended for Buckhorn handlebars.

TURN SIGNAL MIRRORS Other motorists need to know when you’re turning. Our super-bright L.E.D.'s show everyone your intentions. They work as running lights too so even when you’re just going straight the world knows you’re there. Hardware for a variety of H-D mounting applications & the necessary load equalizer is included.

K1431 K1432 K1433 K1436

Turn Signal Mirrors with Flat Glass (pr) Turn Signal Mirrors with Convex Glass (pr) Replacement Flat Glass with Bezel (ea)

Replacement Convex Glass with Bezel (ea) Note: Not recommended for Buckhorn handlebars or ’04 and up XL Models. May be in violation of FMVSS #108.

TRIDENT MIRRORS A beefy yet light three bar mirror stem with double adjustment points & a swivel head, these mirrors lock in just where you want. The convex lens offers increased viewing with approximately 9" from mount to mirror end. All mounting hardware included. Dim: 4-3/4” Wide x 2-1/8” Tall (Convex Lens)

K1495 Trident Mirrors (ea)

BLIND SPOT II TURN SIGNAL MIRRORS Alert other drivers of your intention to move! These classy mirrors have an L.E.D. amber turn signal directed to the side & visible from the front or rear to get the attention of drivers in your blind spot. Hardware for a variety of H-D applications is included.

K1499 Blind Spot II Turn Signal Mirrors (pr) K1457 Blind Spot Turn Signal Mirror Heads Only (pr) Note: Mount stud has 1/4"-20 threads.

K1497 Repl. Stem for Blind Spot II, Right (ea) K1498 Repl. Stem for Blind Spot II, Left (ea) Note: Not recommended for Buckhorn handlebars.

EDGE LENS UPDATE FOR BLIND SPOT MIRRORS If your Blind Spot Mirrors were produced before 2011, adding these lenses is a great way to enhance visibility of the L.E.D.'s from the front & rear.

K1447 Edge Lenses for Blind Spot Mirrors (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

131

MAGNUM™ PLUS MIRRORS

K1428

Magnum Plus Mirrors position the mirror head outward 2” farther than our Magnum Mirrors. Available with flat or convex glass. Hardware for a variety of H-D mounting applications is included. Fits Right or left.

STANDARD STEMS

MAGNUM PLUS STEMS 3-15/16”

4-3/8”

5" x 2-5/8"

LARGE HEAD

K1409 Convex Glass (ea) K1412 Flat Glass (ea)

K1430

3-9/16”

SMALL HEAD

K1410 Flat Glass (ea) K1408 Convex Glass (ea)

5-1/2”

REPLACEMENT COMPONENTS

Note: Not recommended for Buckhorn handlebars or ’04 and up XL Models.

FOR MAGNUM

5-1/2" x 3"

& MAGNUM PLUS MIRRORS

MIRROR HEADS ONLY

K1417 Small Head with Flat Glass (ea)

MAGNUM™ MIRRORS

K1410 5" x 2-5/8"

K1418 Large Head with Flat

We call them Magnum because of their rugged & beefed up looks. Featuring sturdy stems & an oversized adjuster ball. Available in two head sizes. Hardware for a variety of H-D mounting applications is included.

5-1/2" x 3"

Convex Glass (ea)

K1407 Large Head with

Convex Glass (ea)

CHROME MIRROR STEMS

K1400 Magnum Plus Stem

K1430 Large Head -

K1401 Standard Magnum Stem

(Right or Left) (ea)

Standard Stem (pr) Note: Not recommended for Buckhorn handlebars or ’04 and up XL Models.

WINDSHIELD MOUNTED MIRRORS Wipe your bars clean with our innovative Windshield Mounted Mirrors. Sleek design blends a classy chrome windshield accent strip with gracefully curved arms to support the mirror heads. The Mirror heads are positioned just above the upper edge of the fairing to provide great rearward visibility. Choose Blindspot Turn Signal Mirrors (P/N K1403) & you'll add auxiliary edge-lit turn signal indication. Choose Turn Signal Mirror Heads (P/N K1452) & you’ll add auxiliary forward facing running & turn signals. Fits: ’96 and up Electra Glides, Street Glides, Trikes, & Küryakyn AirMaster Fairing

K1761

K1403

132

K1406 Small Head with

K1428 Small Head -

Standard Stem (pr)

K1412

Glass (ea)

(Right) (ea)

K1402 Standard Magnum Stem (Left) (ea)

K1761

Gloss Black Mounted Scythe Mirrors (set)

K1452

Windshield Mounted Turn Signal Mirrors (set)

K1453

Windshield Mounted Ellipse Mirrors (set)

K1403

Windshield Mounted Blindspot Turn Signal Mirrors (set)

K1454

Windshield Mount Only for Mirrors (ea)

Replacement Snap Caps (set/3) Note: P/N K1454 allows installation of any Magnum Mirror Heads (above) or any mirror you may have with a 1/4”-20 threaded stud.

K1455

MOUNT UP OR DOWN

SNEAK PEEK! TURN SIGNALS FOR STOCK MIRROR STEMS COMING SOON!

TRIDENT BAR END MIRROR Just like the café racers of the 60’s, bar end mirrors are back & better than ever. These are a great way to transform the look of your bars & put the mirrors in a wider, more useful position. The offset arm & swiveling head provides great adjustability. Note: Proper installation may require cutting or drilling a 5/8” hole in the end of the OEM grips. Proper installation requires 7/8” or 1” handlebars that have open ends. Not compatible with Küryakyn Chrome style throttle bosses that screw to the end of Küryakyn Grips or other grip end accessories/weights. Not suggested for Buckhorn style handlebars.

K6370 Trident Bar End Mirror - Wedge Style (ea)

Fits: 1” or 7/8” handlebars with hollow bar ends & OEM or Küryakyn ISO & Transformer Grips (Does not fit with internally wired heated grips or air reservoir handlebars)

Note: Does Not fit throttle side ’08 and up Touring Models, Trikes or ’11 and up FLSTSE with electronic Throttle Controls. Suggested Installation for Left Grip Clutch Side Only.

Note: Adapters are available to install Küryakyn Mirrors on just about any bike.

K1411 For Honda, Kawasaki, Suzuki, Victory (pr) K1413 For Yamaha Cruisers (pr)

K1439

BLIND SPOT TURN SIGNAL MIRRORS

MIRROR CAPS

WITH INNER FAIRING MOUNTS

FOR STREET GLIDE

Utilizing our Blind Spot Turn Signal Mirror head with a cleverly designed mount, Küryakyn offers you an awesome combination of looks & function. The mirror heads & mounts are beautifully chromed & provide excellent rearward visibility. Amber L.E.D.’s in the outer edge of the mirror function as auxiliary turn signals & plug into the stock wiring harness.

Why keep your mirrors camouflaged within your fairing? Add our Mirror Caps & highlight those great lines by adding a sparkle of chrome in an unexpected location. Also available with built-in amber auxiliary turn signals using simple plug-in connections to add that extra visibility to other drivers on the road.

Fits: ’06 and up Street Glides, ’10-’11 Street Glide Trikes, ’96 and up Electra Glides, & ’09 and up Tri Glides

Fits: ’06 and up Street Glides, ’10-’11 Street Glide Trikes & any ’96 and up Electra Glide or '09 and up Tri Glide equipped with H-D (P/N 91945-98B)

Note: Installation on Electra Glides &Tri Glides requires drilling mounting holes. A convenient template & all hardware included.

K1456 Blind Spot Turn Signal Mirrors (pr) Note: Now includes Edge Lens (Not Shown Above but shown on P/N K1403 at Left).

K1427 Mirror Caps for Street Glide (pr) K1439 Lighted Mirror Caps for Street Glide (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

133

HANDLEBAR CHROME '00 '01 '02 '03 '04 '05 '06 '07 '08 '09 '10 '11 '12 & up

K6205

K6260

K6271

K6205

K6260

K6205

FOR H - D TOURING

-p

es lad ss B Bo

Trig

rL eve

rs -

rs ie L eve mb

12 pg

27 g1 -p

ss-

K it

Dre

rm sfo Tra n

12 6 Sw it c h w/ H Au ous d i o in g &C s rui Sw se it c h -p g1 Co Ho 26 ver usi n sg pg

ip s Gr ie ™ mb Zo

er ™ Gr ips Sw -p it g1 20 w/ ch Ho Au u s d i o in g s -

21 g1 -p

g1 -p

Gr w® do Wi

me ISO ® -Fla

ip s

sr ip ISO ® -G

ip s

119

-p

g1 18

HANDLEBAR C H R O M E PA C K A G E S

(ELEC TR A G LI DE , STREE T G LI DE , ROAD G LI DE , ROAD KI NG)

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

K7827

K7828

K7809

K9119

K1047

K1029

K1080

K6227

K6269

K6276

K6298

K6293

K7827

K7828

K7809

K1740

K1058

K1056

K1057

K6227

K6269

K6276

K6298

K6293

K7827

K7828

K7809

K1740

K1058

K1056

K1057

K6227

K6269

K6276

K6298

K6293

K7827

K7828

K7809

K1740

K1058

K1056

K1057

K6227

K6269

K6276

K6298

K6293

K7827

K7828

K7809

K1740

K1058

K1056

K1057

K6227

K6269

K6276

K6298

K6293

K7827

K7828

K7809

K1740

K1058

K1056

K1057

Note: Model Specific Chrome Swirch Housing Conversions listed on pg 126.

HANDLEBAR CHROME '00 '01 '02 '03 '04 '05 '06 '07 '08 '09 '10 '11 '12 & up

K6205

K6260

K6271

K6205

K6260

K6205

DYNA

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K7809*

K9126

K1047

K1029

K1080

K6205

K6260

K6271

K6296

K6291

N/A

K9126

K1047

K1029

K1080

HANDLEBAR CHROME

FOR H - D SPORTSTER

'99 '00 '01 '02 '03 '04 '05 '06 '07 '08 '09 '10

K6205

K6260

K6271

K6296

K6291

N/A

K7808

N/A

K6205

K6260

K6271

K6296

K6291

N/A

K7808

N/A

K6205

K6260

K6271

K6296

K6291

N/A

K7808

N/A

K6205

K6260

K6271

K6296

K6291

N/A

K7808

N/A

K6205

K6260

K6271

K6296

K6291

N/A

K7808

N/A

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

'11

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

'12 & up

K6205

K6260

K6271

K6296

K6291

N/A

K7808

K1741

K1060

N/A

K1093

* Dyna Only

134

FOR H - D SOFTAIL

FOOTPEGS K7562 K7561 K7560

TRIDENT ISO®-PEGS All the features & comfort of the original ISO-Peg with a whole new look! Coordinates well with stock or custom footrests. Already have ISO-Pegs? Then introduce a whole new style by adding the Trident Replacement Rubbers.

7592

CHROME

K7590 K7591 K7592 K7593 K7594

GLOSS BLACK

Small Trident, Male Mount (pr) Large Trident, Male Mount (pr) Dually Trident, Male Mount (pr) Trident ISO-Shift Peg, Standard (ea)

K7560 K7561 K7562 K7558

Black Small Trident, Male Mount (pr) Black Large Trident, Male Mount (pr)

7594

K7594

Black Dually Trident, Male Mount (pr) Black Trident Shift Peg, Standard (ea)

Trident Shift Peg - Longhorn 5/8” longer than your stock shift peg

K7590

REPLACEMENT RUBBERS

Fits: Küryakyn Trident Pegs & ISO-Pegs

K4345 Replacement Rubbers for

K7591

Trident Small ISO-Peg (pr)

K4338 Replacement Rubbers for

Trident Large ISO-Peg (pr)

K4339 Replacement Rubbers for

Trident Dually ISO-Peg (pr)

K4390 Replacement Rubber for Trident Shift Peg (ea)

K7592

SLEEK UPGRADE TO OUR MOST POPULAR PEGS!

K4391 Replacement Rubber for

Longhorn Trident Shift Peg (ea)

KAISER™

U.S. Patent D528,477

The ultimate chopper footpeg! From the Maltese Cross insert to the spire pointed end, these pegs are old-school custom. Like all Küryakyn Pegs, the ends are interchangeable so our extensions or female ends are quickly & easily changed.

K4460 K4465 K4490 K4462

Kaiser Pegs, Male Mount (pr) Kaiser Peg Replacement Rubber Pads (set) Replacement “Curb Feelers” (pr) Replacement Maltese Cross Emblem (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

135

A A

K8029

K8044

K7588

K8022

K7589

K8027

A. DELUXE ISO®-BRAKE PEDAL PADS

B. ISO®-BRAKE PEDAL PADS

Lose that unsightly & just plain boring stock brake pedal pad & replace it with the finest pedal on the market. Featuring high quality soft rubber wrapped in glistening chrome, this premium pedal looks good & is made to last. Goes great with any Küryakyn floorboard or footpeg & installs easily using hidden fasteners for a flawless appearance & simple installation. up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

Two-piece clam-shell cover tranforms your brake in minutes! Fits: ’99 and up XL883/1200 Customs, ’03 and up FXDWG, ‘08 and up FXDF with Forward Controls, & all V-Rod (except VRSCD & VRSCR)

Tour Glides, Road Kings, Trikes, all FLST Models & '12 and up Dyna Switchback (ea)

Small Peg Set (8 pcs) Large Peg Set (8 pcs) Dually Peg Set (14 pcs) ISO-Wing Set (8 pcs)

K8044 The Longhorn — same fitment as 8029 (ea) K8027 Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides,

C. BRAKE PEDAL COVER

K7589 Fits: All Electra Glides, Road Glides, Street Glides,

K8009 K8010 K8023 K4454

Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

Road Kings, Trikes, all FLST Models & '12 Dyna Switchback (ea)

K7588 Fits: All FXST Models, ’08-’11 Rocker Models, '11 and

ISO®- REPLACEMENT PADS

K8029 Fits: All FXST Models, all ’08-’11 Rocker Models, '11 and up

K8022

K8011 K8080 K8081 K8082 K8083

Brake Pedal Cover (ea)

K8010 K8011

Shift Peg Set (4 pcs) ISO-Stirrup Heel Pads (pr) Brake Pedal Pad Set for 8029 (3 pcs)

K8023 K8009 K8082

Brake Pedal Pad Set for 8027 (3 pcs)

K8080 K8083

Brake Pedal Pad Set for 8044 (4 pcs)

K8081

STILETTO The radical Stiletto Peg is designed for those who ride on the wild side.

K4475 Stiletto Pegs, Male Mount (pr) K4479 Stiletto Shift Peg (ea) K4480 Stiletto Brake Pedal Pad (ea)

Fits: All FXST Models, all ’08-’11 Rocker Models, '11 and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

K4480

K4477 Stiletto Stirrups with Pegs (pr) REPLACEMENT COMPONENTS FOR STILETTO PEGS

K4485 K4486 K4487 K4488 K4490 K4477

Stiletto Peg Replacement Rubber Pads (set) Stiletto Stirrups Replacement Rubber Pads (set) Stiletto Shift Pegs Replacement Rubber Pads (set) Stiletto Brake Pad Replacement Rubber Pads (pr) Replacement “Curb Feelers” (pr)

K4482 For Stiletto Shift Peg (ea) K4483 For Stiletto Stirrups (pr) K4484 For Stiletto Pegs (pr) K4489 For Stiletto Brake Pedal Pad (pr)

136

K4484

DOMED END CAPS FOR STILETTO PEGS

K4489

K4484

ISO®-PEGS

K8028

ISO-Pegs dampen vibration while giving your scoot that custom look - All at the same time! The industry’s most comfortable footpegs!

K8000 Small Peg, Male Mount (pr) K8002 Large Peg, Male Mount (pr) K8028 Dually, Male Mount (pr)

K8002

K4450

U.S. Patent D405,393

Note: P/N’s K8000 & K8002 include chrome mounting hardware.

ISO®-WING MINI BOARDS The ISO-Wing has the greatest surface area of any of our offerings to date! Its sleek lines & trim profile offers a variety of applications for driver or passenger. Available with a standard male mount, with the Magnum Quick Clamp for engine guard applications, or in our Tour-Tech System - pg 150.

K8000

4450 Chrome ISO-Wing, Male Mount (pr) 7563 Black ISO-Wing, Male Mount (pr)

K8021

K8024 ISO®-PEGS MALE MOUNT K8025

STANDARD & LONGHORN™ ISO®-SHIFT PEGS

K8024 Longhorn Small Peg (pr) K8025 Large Peg with 1” ext. (pr) Note: P/N K8024 includes chrome mounting hardware.

K8001

ISO®-PEGS FEMALE MOUNT K8001 Small Female 5/8” Square

K8003

Mount ISO-Peg (pr)

Finish off your set of ISOPegs with the ISO-Shift Pegs. Standard is stock-like in size; Longhorn is 5/8” longer & is great for extended controls.

K8004

K8004 Standard ISO-Shift Peg (ea) K8021 Longhorn ISO-Shift Peg (ea)

K8003 Large Female Bullet Style Mount ISO-Peg (pr)

SWINGWING PEGS Enormous numbers of people have asked us how they can stretch their legs a little without spending several hundred dollars for extended controls. Here’s the answera convenient fold-forward, comfortable cruise peg that fastens in place of your stock peg & provides a secondary fold-out peg 3” forward. Replaces any H-D style male-mount peg. FLIP OUT ARM FOR CRUISIN' COMFORT

Closed

K4466 SwingWing Pegs, Male Mount (pr) U.S. Patent D560,562

K4468 SwingWing Peg Replacement Rubber Pads (set)

ISO®- SWEPTWING PEGS Simple & stylish. Add the sleek lines of the ISO-SweptWing Peg to streamline your bike & get ready for flight. Traditional ISO style blended with reduced vibration design creates a one-of-a-kind footpeg. Add them solo or coordinate them as a matched set to Küryakyn’s SwingWing Peg (pg above).

K4463 ISO-SweptWing Peg, Male Mount (pr) K4469 ISO-SweptWing Peg Replacement

K4463

Rubber Pads (set)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

137

WIDOW® A shift peg, brake pedal pads & stirrup heel rests have crawled out of the shadows in the Küryakyn R&D Department. Their wicked, spider themed designs look awesome by themselves or with the rest of our Widow accessories. WIDOW® PEGS

K4491 Widow Pegs, Male Mount (pr) K4474 Replacement “Curb Feelers” (set/4) K4493 Widow Peg Replacement Rubber

K4423

Pads (set)

WIDOW® STIRRUPS

K7533

K4423 Widow Pegs & Stirrups, Male Mount (pr) WIDOW® BRAKE PEDAL PADS

K7533 Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, all FLST Models & '12 and up Dyna Switchback (ea)

K7534 Fits: All FXST Models, all ’08-’11 Rocker Models, '11

and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

K4494

K7534 4

WIDOW® SHIFT PEG

K4494 Widow Shift Peg (ea)

PILOT™ PEGS

LIBERATOR®

With Pilot Pegs you get the same versatility as with the ISO & Retro Pegs. Our wide variety of extensions, clamps, & accessories provide endless possibilities for peg location & application. A transforming full-coverage brake pedal pad completes the set.

Escape the tyranny of mundane pegs! Barrelshaped chrome bodies & perforated rubber pads, these pegs are ready to defend freedom everywhere.

K4597

K4595 Liberator Pegs, Male Mount (pr)

K4425 Pilot Pegs, Male Mount (pr) K4426 Pilot Shift Peg (ea) K4429 Pilot Brake Pedal Pad (ea)

Note: Includes Ammo Pin Mounting Hardware.

K4591 Liberator Peg Replacement Rubber Pads (set)

Fits: All FXST Models, all ’08-’11 Rocker Models, '11 and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

K4430 Mini Pilot Peg, Male Mount (pr) K4426

LIBERATOR® PEGS

K4592 Ammo Pin Peg Mounting Hardware (kit) LIBERATOR® STIRRUPS

K4597 Liberator Pegs & Stirrups, Male Mount (pr)

Note: Includes Ammo Pin Mounting Hardware.

K4599 Liberator Stirrups without Pegs or Adapters (pr)

K4429

K4594 4593

K4430

K4425 K4595

PILOT™ STIRRUPS

K4428 Pilot Pegs with Stirrups, Male Mount (pr)

LIBERATOR® SHIFT PEG

K4593 Liberator Shift Peg (ea) LIBERATOR® BRAKE PEDAL PAD

REPLACEMENT PADS FOR PILOT ™ PEGS

K4431 K4432 K4433 K4434

138

Pilot Peg (8 pieces) Pilot Stirrups or Shift Peg (2 pieces) Pilot Brake Pedal Pad (3 pieces) Mini Pilot Peg (2 pieces)

K594 Fits: All FXST Models, all ’08-’11 Rocker Models, '11 and

up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

K4589 Liberator Brake Pedal Pad Replacement Rubber Pad (set)

ZOMBIE™ Our zombies are taking over! Unique style & durability make these pegs, brake pedal pads, & shift peg a stunning addition to your bike. All feature beautiful chrome with durable rubber pads & our ominous Zombie skull. To make a wicked thing even better, Küryakyn offers many other Zombie accessories so you can carry this theme throughout your bike. ZOMBIE™ PEGS

K4470 Zombie Pegs, Male Mount (pr) K4472 Zombie Peg Replacement Rubber Pads (set)

K4474 Replacement “Curb Feelers” (set/4) K4473 Replacement Skull Emblem (ea) K4406 K4405

ZOMBIE™ BRAKE PEDAL PADS

K4406 Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, all FLST Models & '12 and up Dyna Switchbacks (ea)

K4405 Fits: All FXST Models, all ’08-’11 Rocker Models, '11

ZOMBIE™ SHIFT PEG

and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

K4414 Zombie Shift Peg (ea)

K4406

EXCELLENT FOR DRIVER CRUISE PEGS OR ALTERNATE PASSENGER FOOT POSITIONS

MINI DAGGER Purely evil without the heavy peg look! These mini Zombie style pegs are 1” wide by 3-1/2” long & are great for keeping cruise, driver, or passenger pegs minimal. The inner scallop provides excellent support for highway pegs when you throw your foot over the top.

K7521 Mini Dagger Pegs, Male Mount (pr) K7512 Mini Dagger Peg Replacement Rubber Pads (set) K1492 Replacement Zombie Medallions (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

139

K4404 K4403 K4400

RETRO™

Combining the comfort of the classic ISO-Pegs with modern, updated styling! The same vibration-absorbing material is used for a stylized, sleek tread.

K4400 Retro Pegs, Male Mount (pr) K4404 Retro Shift Peg (ea) K4403 Retro Brake Pedal Pad (ea)

K4420

K7518

Fits: All FXST Models, all ’08-’11 Rocker Models, '11 and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

CLASSIC STYLE WITH RETRO LOOKS

K4420 Retro Pegs with Stirrups, Male Mount (pr)

K4408 Replacement Rubber Pads

K7519

FLAMIN ’ BRAKE PEDAL PADS

K7518 Fits: All Electra Glides, d Road d Glides, ld

Street Glides, Tour Glides, Road Kings, Trikes, & all FLST Models & '12 Dyna Switchback (ea)

for Retro Pegs (4 pcs)

CHROME FOOTPEG MOUNTING HARDWARE

K7519 Fits: All FXST Models, all ’08-’11 Rocker

Zinc-plated footpeg hardware on MY bike? NO WAY!

K7943 Chrome Footpeg Hardware for Male Mount Pegs (pr)

Models, '11 and up Blacklines, ’93 and up Dyna Wide Glides, ’08 and up Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

AMMO PIN PEG MOUNTING HARDWARE

Included with P/N's K4595 & K4597, but can be purchased separately Includes two pins with clips & spring washers.

K4592 Ammo Pin Peg Mounting Hardware (kit)

PEG ADAPTERS FOR BIG DOG MOTORCYCLES K8881 Use these adapters to easily install Küryakyn footpegs

K8007

K8006

on your ’04-’10 Big Dog Motorcycle. Requires Footpegs without adapters below (sold separately)

K8065

K8880

K8008 K8066

K8067

ENDS & BOLTS K8006 K8007 K8008 K8880 K8881 K8065 K8066

Female for “Bullet” Mounts (pr) Female for 5/8” Square Mount (pr) Male Mount (pr)

K7964 K7965 K4452 K7568

Splined Male Mount Adapter (pr) Bolt for Small ISO-Peg (ea) Bolt for Large ISO-Peg, Dually ISO-Peg, & ISO-Wing (ea)

Small ISO-Pegs (pr) Large ISO-Pegs (pr) ISO-Wing Pegs (pr) Black ISO-Wing Pegs (pr)

K7963 Dually ISO-Peg (pr) K4464 ISO-SweptWing (pr)

Serrated Male Mount (ea)

K8067 Bolt for 8004 Shift Peg (ea)

140

K8882 Peg Adapters for Big Dog (pr) FOOTPEGS WITHOUT ADAPTERS

K4419 K4417 K4492 K4471 K4401

Pilot Pegs (pr) Flamin’ Pegs (pr) Widow Pegs (pr) Zombie Pegs (pr) Retro Pegs (pr)

K4476 K4461 K7520 K7595 K7565

Stiletto Pegs (pr) Kaiser Pegs (pr) Mini Dagger Pegs (pr) Small Trident ISO-Peg (pr) Black Small Trident ISO-Peg (pr)

K7596 Large Trident ISO-Peg (pr) K7566 Black Large Trident ISO-Peg (pr)

K7597 Dually Trident ISO-Peg (pr) K7567 Black Dually Trident ISOPeg (pr)

5/8”

SMOKIN’STYLE!

FLAMES have always fascinated man. What do bikers

stand around at night? A firepit. So keep the fire blazin’ with these hot Flamin’ Pegs & Pads! No matter where you’re headed, they’ll get you there in style. They’re tough, die cast, chrome-plated, & the rubber components aren’t glued on—they’re physically fastened into place. Check out our Flame Windshield on page 239 for a complete inferno.

K4411

FLAMIN ’ SWITCHBLADE PEGS

U.S. Patent 6,893,038 & D593,911

K4411 Flamin’ Switchblade Footpeg, Male

FLAMIN ’ PEGS

U.S. Patent D593,911

K4413 Flamin’ Switchblade Replacement

K4416 Flamin’ Pegs, Male Mount (pr) K4413 Flamin’ Peg Replacement

K4490 Replacement Curb Feelers (pr)

K4490 Replacement “Curb Feelers” (pr)

Mount (pr)

Rubber Pads (4 pieces)

Rubbers Pads (4 pieces)

Note: Flip out arm designed to be a heel rest. FLAMIN ’ SHIFT PEG

K4418 Flamin’ Shift Peg (ea)

K4416 K4418 K4411 - Closed

SWITCHBLADE PEGS

U.S. Patent D506,707 & 6,893,038

Switchblade Footpegs are sleek, versatile, & supremely comfortable. In their standard compact mode they're a large-surface-area, rubber-isolated footpeg. Deploy the concealed heelrest & now you have the added fatigue-fighting comfort of the famous Küryakyn ISO-Stirrups. Although this setup will work in any peg location, these are the IDEAL footpegs for bikes using forward controls or as forward mounted cruise pegs!

K4445 Switchblade Pegs, Male Mount (pr) K4447 Replacement “Curb Feelers” (pr) K4448 Switchblade Pegs Replacement Rubber Pads (10 pieces)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

141

STIRRUPS

MALE MOUNT M STIRRUPS We added W dd d a heel rest to our popular ISO®-Pegs to give you floorboard-like comfort without the added bulk.

B K8062

K8076

K8075

K8074 ISO-Stirrups without Pegs, Male

A. ANTI-ROTATION PASSENGER FLOORBOARD MOUNTS FOR SOFTAIL

Mount (pr)

K8075 ISO-Stirrups with Large

ISO-Pegs, Male Mount (pr)

K8074

Now you can add floorboards to your Softail without the chance of them rotating or coming loose down the road. These mounts feature interlocking teeth that make adjustments simple & precise.

K8076 ISO-Stirrups with Small

ISO-Pegs, Male Mount (pr)

K8062 ISO-Stirrups with Dually Pegs, Male Mount (pr)

Interlocking Surface Ensures Arm Stays in Place

U.S. Patent D405,393

K4371 Fits: ’07 and up Softail

Deluxe & '08-'11 Cross Bones with Stock Rear Exhaust Support Bracket Note: If stock exhaust system & rear support bracket has been removed & replaced by a staggered dual or 2-1 system, use P/N K4372.

K8077

REPLACEMENT ISO®-STIRRUP COMPONENTS

K8078 K8079

K8077 ISO-Stirrup Mount, Female (ea) K8079 ISO-Stirrup Mount, Male (ea) K8078 ISO-Stirrup Arm

CHROME INSERTS

K4372 Fits: ’08 and up FLSTC,

FOR ISO ® - STIRRUPS

K8058 Chrome

ISO-Stirrup Inserts (pr)

(Fits Right or Left) (ea)

K4554 1-3/4” Aileron 50305-02

K4374 Fits: ’00-’07 FLSTC, ’06

Slotted Chrome & Rubber 43280-01 Centerline 52317-07

Airfoil Small 50134-95

Chrome & Rubber Large 50130-95

Custom Footpegs Large 50915-90T

Crested Bar & Shield 50576-05

Airfoil Large 50133-95

P/N K4554 is compatible with the H-D Accessory Pegs shown left.

Chrome & Rubber Small 50131-95

Custom Footpegs Small 50916-90T

B. NON-PIVOTING

ISO®-STIRRUPS FOR H -D CUSTOM PEGS

Slip Stream Strea m 50500091 50 5050009 5000911

Diamond DiamonddPl Di Plate 50506-03 5505506 06-03 033

Flame 50312-03

Skull 50370-04

X2 50472-08

K4555 ISO-Stirrups for H-D Pegs (pr)

Stealth 50359-04 Smooth Chrome Billet 43121-01

Ironside 50935-07

142

SPLINED MALE MOUNT ADAPTERS

3-5/8”

K4554 ISO-Stirrups for H-D Pegs (pr)

FLST, ’00-’07 FXST & FXSTB, ’07 FXSTC, ’00-’06 FXSTS Note: Will also fit ’05-’06 FLSTN, ’00-’07 FLSTF, & ’07 FXSTSSE if the stock exhaust & rear support bracket has been removed & replaced with a staggered dual or 2-1 system.

Streamliner 50211-04

Airfoil X-Large 50474-03

Affordable way to add the comfort of heel rests to your custom H-D footpegs. Quick & easy to install.

FXSTC, ’08-’09 FXSTB, ’10 FLSTSE Note: Will also fit ’08 and up FLSTN, FLSTF, FLSTFB, FLSTSB, & FXSTSSE if the stock exhaust & rear support bracket has been removed & replaced with a staggered dual or 2-1 system.

Hog 50364-04

K4555 P/N K4555 is compatible with the H-D Accessory Pegs shown left & Tribal 51376-09 (not shown).

Avoids a “double jointed” connection to the bike. Designed for Küryakyn’s folding floorboard products; Ribbed & Premium (P/N’s K4351 & K4357), Transformer II (P/N K4380), & ISO-Boards (P/N’s K7916 & K4455).

K8883 Non-Pivoting

Splined Male Mount Adapters (pr)

FLOORBOARDS

SWITCH FROM PEGS TO BOARDS IN A HEARTBEAT!

P / N K 4351 S H O WN O N STO C K STRE ET G LI D E PASS E N G E R P EG M O U NT US I N G P / N K 8883 A D A PTE RS

K4351 Closed

K4357 Ribbed

P / N K 4357 S H O WN O N S O F TAI L D E LU X E US I N G P / N K 4371 M O U NTI N G KIT

PREMIUM & RIBBED FLOORBOARDS FOR DRIVER OR PASSENGER

I N N O VATIVE D ES I G N P RO VI D ES FIVE M O U NTI N G POS ITI O N S TO C H O OS E FRO M

Patent Pending

Style, quality, function, & adjustability at a price that can’t be beat. Switching to floorboards just got easier & with five thoughtfully placed splined mounts, these boards can be fine tuned just right for the rider or passenger. Available in two versions; Ribbed, featuring a wrinkle black finished base & Premium, featuring a brilliant chrome finished base with chrome inlays in the foot pad rubber. M O U N T I N G C O M P O N E N T S O L D S E PA R AT E LY ( L E F T ) . I N S TA L L AT I O N O N S O F TA I L M O D E L S R E Q U I R E S A N T I - RO TAT I O N M O U N T K I T S . I N S TA L L AT I O N O N O T H E R M O D E L S I N P L A C E O F A M A L E M O U N T F O O T P E G R E Q U I R E S P/ N K 8 8 8 3 . W H E N U S E D W I T H R E T R A C TA B L E PA S S E N G E R P E G S ( P/ N K 4 3 52) N O A DA P T E R S A R E REQUIRED.

K4357 Ribbed Floorboards for Driver or Passenger (pr) K4351 Premium Floorboards for Driver or Passenger (pr) Note: Floorboards are 8-1/2" x 4-1/2". Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener & no anti-rotation mechanism. The board will apply too much force & loosen the mount from the bike. SERVICE PARTS

K4369 Replacement Premium Rubber Pads (pr) K4375 Replacement Ribbed Rubber Pads (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

143

ISO®-BOARD CONVERSIONS FOR H-D MODELS WITH PEGS For those of you who would like to install a board in place of a footpeg - These kits include our finely chromed ISO-Boards & a cast bracket to connect the board to the slip resistant splined adapter (sold separately).

K7916

Mounting components sold separately (pg 142). Passenger Applications for Softail require Anti-Rotation Mounts. Installation on other models in place of a male mount footpeg requires P/N 8883 (pg ??).

K7916 ISO-Board Conversion - Driver or Passenger (pr) K4455 ISO-Board Conversion - Passenger (pr) K4543 Replacement Rubber Pads for ISO-Boards (8 pieces) Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener & no anti-rotation mechanism. The board will apply too much force & loosen the mount from the bike. D E T E R M I N E T H E S T Y L E T H AT B E S T F I TS Y O U R A P P L I C AT I O N :

K7916 Configuration P/N K7916 C AN BE USED FOR DRIVER OR PASSENG ER . VERIFY OPERATION OF EXISTING SHIFT LEVER & BRAKE PEDAL WILL NOT BE ADVERSELY EFFECTED BY INSTALLATION.

K4455 Configuration P/N K4 455 IS RECOMMENDED FOR PASSENG ER USE ONLY; BRAC KET DESIGN ELEVATES BOARD ABOVE EXISTING PEG LOC ATION ABOUT 1-1/4”.

9”x 4-1/2”

CONSTELLATION BOARDS WITH MALE MOUNT Mounts directly to your standard peg location & gain adjustments in almost any direction. Extends 4-3/4” back from peg mount & folds at mounting block. Allows infinite adjustments within 2" horizontal section. Two mounting positions.

K4358 Constellation Boards, Male Mount (pr) K4459 Replacement Rubbers (set) 10” L x 4-1/2” W

2” 1-1/8” Mounting Block

Important Notice: Be aware of components on bike that may interfere with the placement of boards. Some angles may cause board to contact other components on the bike before board is folded up completely. Cornering clearance may be limited if board is positioned to fold up as stock.

PREMIUM FLOORBOARD INSERTS FOR DRIVER

& PASSENGER

Our Premium Inserts for Driver Floorboards ride on rubber isolators to keep your feet buzz-free. The cushy inserts for Passenger Boards pop right in place of the stock pads. They’ll look great on any bike using H-D’s Traditional or Half Moon shape driver boards & D-shaped passenger boards.

K7549

Half Moon Driver Boards – ’09 and up FLSTC, ’08-’11 FLSTSB, & ’10 and up FLSTFB (pr)

K7553

Traditional Driver Boards – ’84 and up Electra Glides (except ’04-’05 FLHTCSE & ’06-’12 FLHTCUSE), ’84-’96 Tour Glides, ’98-’09 Road Glides (except ’09 FLTRSE), '11 and up Road Glide Ultras (except '11 FLTRUSE), ’94 and up Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE), ’09 and up Trikes, & ’86-’08 FLST/FLSTC, ’90 and up FLSTF, ’93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC, '12 and up Dyna Switchback (pr)

K7554

Traditional D-Shaped Passenger Boards – ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings & Trikes with Traditional D-Shaped Passenger Boards – Will also fit all ’86 and up Softail or '06 and up Dyna Models Equipped with H-D Accessory Passenger Floorboard Kits Using Traditional D-Shaped Passenger Floorboards (pr)

K7549

K7553

144

K7552 K7523

K4572

PASSENGER FLOORBOARD INSERTS Created from a sculpted black rubber pad with a chromed inlay, our Inserts match our killer Driver Floorboard Covers. Easily installed in place of the stock, ribbed rubber pads. Fits: ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings, & Trikes with Traditional D-Shaped Passenger Floorboards, also all ’86 and up Softail or '06 and up Dyna Models Equipped with H-D Accessory Passenger Floorboard Kits Using Traditional D-Shaped Floorboards

K4572 Zombie (pr) K7523 Flame (pr) K7552 Widow (pr)

ISO®–BOARDS ISO-Boards are a great looking & comfortable alternative to the lackluster original equipment floorboards. Rubber ISO-ribs run the full length of the board providing both traction & comfort. Longer than stock length allows you more room on long hauls. Fits: ’83 and up Electra Glides, Road Kings, Road Glides, Street Glides, Tour Glides, Trikes, All ‘86 and up FLST Models & '12 and up Dyna Switchback

K7905 ISO-Boards (pr) K4542 Replacement Rubber Pads for ISO-Boards (8 pieces)

ISO®-PASSENGER BOARDS ISO-Passenger Boards complement the ISO-Boards perfectly. These boards were designed with comfort in mind for both you & your passenger. The curved leading edge is “ankle friendly” to the rider when maneuvering into or out of parking spots. Fits: '93 and up Electra Glides, '94 and up Road Kings (except, ’04-’07 FLHRS, ’02-’03 & ’07-’08 FLHRSE), ’98 and up Road Glides (except ’00-’01 & ’09 FLTRSE, '10 and up FLTRX & '12 and up FLTRXSE), ’93-’96 Tour Glides, ‘09 and up Trikes, & all '86 and up FLST or '06 and up Dyna Models with H-D Accessory Passenger Floorboard Kits

K7906 ISO-Passenger Boards (pr) K4543 Replacement Rubber Pads for P/N 7906 (8 pieces)

PURCHASE BOTH & SAVE

K7905

K7906

Outfit both Driver & Passenger & save over buying them separately! K7902 Combo Set - K7905 ISO-Boards & K7906 ISO-Passenger Boards

15”x 4-1/2”

9”x 4-1/2”

K7522

K7551

K4566

DRIVER FLOORBOARD COVERS Standing out without being pushy, the chromed inlays play nice with the rest of the Küryakyn bling that makes your bike unique. Direct replacements for the stock floorboard covers, the assemblies sit on top of the stock steel base plates so no comfort is compromised & the raised rubber edge keeps your boot heels off the pipes. Now available to match our most popular themes! Fits: Traditional Boards -‘84 and up Electra Glides (except ‘04-‘05 FLHTCSE & ‘06 and up FLHTCUSE), ‘84-‘96 Tour Glides, '98-'09 Road Glides (except '09 FLTRSE), '11 and up Road Glide Ultras (except '11 FLTRUSE), ‘94 and up Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09 and up Trikes & all ‘86-‘08 FLST/FLSTC, ’90 and up FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC, '12 FLD

K4566 Zombie Driver Board Covers (pr) K7522 Flame Driver Board Covers (pr) K7551 Widow Driver Board Covers (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

145

K4564

A K8064

Footpeg Not Included

K4563

PASSENGER BOARD COVERS It’ll be hard to beat these cutting edge Passenger Board Covers. Not only do they add an unmistakable look to the passenger boards, but their front edge incorporates a soft bumper to protect your legs when backing out of parking spaces or other tight spots. The Flamed version includes interchangeable Zombie & Maltese Cross Emblems. The Widow Board Covers satisfy the arachnid lover in all of us. Fits: ’86 and up Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes & ’86 and up Softails or '06 and up Dynas with traditional D-Shaped passenger boards

K4563 Flamed Passenger Board Covers (pr) K4564 Widow Passenger Board Covers (pr)

K8039

Footpeg & Male Adapter Not Included

A. MALE MOUNT FOOTPEG EXTENSIONS These are made of machined steel & chrome-plated.

K8063 1-1/2” ISO-Peg Extensions (pr)

K8064 2-1/2” ISO-Peg Extensions (pr)

B. ISO®-PEG EXTENSIONS FOR GENUINE KÜRYAKYN ISO®- PEGS

For Small ISO-Pegs only. For other Küryakyn Pegs use Male Mount Peg Extensions (P/N K8063 or K8064).

K8038 1” ISO-Peg Extensions (pr) K8039 1-1/2” ISO-Peg Extensions (pr)

FLOORBOARD EXHAUST BOOT GUARDS Protect your boots from your exhaust pipe. Easy, tool-less installation & available individually left or right to suit any riders needs. TRADITIONAL BOARDS

U.S. Patent D618,597

Fits: All ’84 and up Electra Glides (except ’04-’05 FLHTCSE & ’06 and up FLHTCUSE), ’84-’96 Tour Glides, ’98-’09 Road Glides (except ’09 FLTRSE), '11 and up Road Glide Ultras (except '11 FLTRUSE) ’94 and up Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE), ’09 and up FLHTCUTG, ’10-’11 FLHXXX, all ’86 and up FLST Models (except ’05 and up FLSTN, ’05-’06 FLSTFSE, ’08-’11 FLSTSB, & ’09 and up FLSTC, ’10 and up FLSTFB, ’10 and up FLSTSE) & '12 and up Dyna Switchback

K7544 Traditional, Right (ea) K7545 Traditional, Left (ea) SWEPT WING BOARDS

U.S. Patent D609,611

Fits: ’06 and up FLHX, ’04-’07 FLHRS, ’10 and up FLTRX, ’04-’05 FLHTCSE, ’06 and up FLHTCUSE, ’07-’08 FLHRSE, ’09 FLTRSE, ’10-‘12 FLHXSE, ’11 FLTRUSE, ’10 and up FLSTSE, '12 and up FLTRXSE, or any H-D Model equipped with H-D accessory Swept Wing shape boards

K7546 Swept Wing, Right (ea) K7547 Swept Wing, Left (ea)

146

1-3/4” FORWARD CONTROL PEG MOUNT EXTENDER Extend your pegs outward just a couple of inches. At the end of the day, that’s the difference between fried boots & fresh ones. Easily mount to the forward control’s existing clevis. For another bonus, add clearance to get your leg around that protruding air cleaner. Fits: Forward Controls on ’00-’10 FXST Models, ’08-’11 Rocker/C, '11-'12 FXS, ’03-’12 FXDWG, ’08 and up FXDF with Forward Controls, ’04-’10 XL1200C/883C

K7524 Forward Control Peg Mount Extender (ea)

K7525 Forward Control Peg Mount Extender (pr)

R E L O C AT I O N EXTENSIONS & KITS K4588

K7528

MOVES BOARDS OUTWARD

1” & FORWARD 1”

RELOCATOR BRACKETS FOR DRIVER BOARDS • Repositions driver boards out 1” & forward 1” from stock location • Makes a noticeable difference in comfort; thighs aren’t as tight against the tank, right knee is not as tight against the air cleaner, & legs get to stretch out a little bit more • Compatible with Küryakyn ISO-Boards as well as H-D Traditional or Swept Wing shaped boards • Not compatible with Cruise Arm Mark III (P/Ns K7914, K7915) or standard-length version of Cruise Arm Mark IV (P/N's K7840 or 7844)

K4588 Fits: ’97 and up Electra Glides, Road Glides,

Relocated

Street Glides, Road Kings, & Trikes (set)

K7528 Fits: ’00 and up FLST Models (set) Stock

3/4”

DRIVER FLOORBOARD SPACERS Move your stock driver boards outward 3/4 of an inch. It doesn’t sound like much, but now you don’t have to hug the gas tank with your thighs to get your foot fully on the board. You’re also alleviating some heat build-up too! All bolts are stainless & the spacers are powder coated black for durability. Compatible with fairing lowers & offered for ’92 and up Touring Models & Trikes.

K450 Fits: ’92-’08 Electra Glides,

Road Glides, Street Glides, Tour Glides, & Road Kings Note: Not compatible with Chrome Display Stand, H-D part number 99002-97.

3/4”

K7509

K7509 Fits: ’09 and up Electra Glides, Road Glides, Street Glides, & Trikes

MOVES BOARDS OUTWARD

3/4”

FOOTPEG & STIRRUP EXTENDERS Protect those new boots from melting all over your front pipe. These slick extenders put another couple inches between those size 15’s & your bike. Fits: All male mount stirrup or footpeg applications

K8043 1-1/4” Extenders (pr) K8041 2-1/4” Extenders (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

147

K7573

PEG MOUNTS

K8015

K7996 Offset Peg Mounts (1/2”-13 mounting bolt) (pr)

K4568

K8016 Longhorn Offset Peg Mounts (pr) K4568 Replacement Mount for Küryakyn

K8061

K7996

Offset, Longhorn Offset, & Underseat Mounts for Softail (ea)

K8088

K8015 Standard Peg Mount (1/2”-20 mounting bolt) (pr)

K8061 Short Magnum Peg Mount (1/2”13 mounting bolt) (pr)

K7573 Gloss Black Short Magnum Peg

Mounts (1/2-13 Mounting Bolt) (pr)

K8088 3-1/2” Long Peg Mount (1/2”-13 mounting bolt) (pr)

K8087 3-1/2” Long Peg Mount (3/8”-16

K8016

mounting bolt) (pr)

K7937

MALE MOUNT LOCKABLE OFFSET The cogged mount lets you adjust the offset for greater flexibility in a wide variety of applications without fear of slippage. 2” & 4” versions are offered to foot the bill for highway pegs, passenger pegs, or any H-D style male mount application. Tapered end accepts most Küryakyn footpeg (sold separately).

K7936

K7936 2” Lockable Offset (pr) K7937 4” Lockable Offset (pr) Note: Not compatible with Küryakyn Floorboards, Liberator Pegs or SwingWing Pegs. 4 Inch

2 Inch

K4557

K4556

ROTATES 360˚

K4556

ADJUSTABLE LOCKABLE OFFSETS A must-have for passengers! Complete circular rotation for 360 degrees of comfort! • Can be used to reposition any male mount footpeg • Both male end & clevis can be rotated 360 degrees & lock securely when fully tightened

K4556 2” Adjustable Lockable Offset (pr) K4557 4” Adjustable Lockable Offset (pr)

148

Note: Not recommended for use on mounts fastened to the motorcycle with only a single fastener. Leverage applied by the offset arm will cause the mount to twist & loosen from the motorcycle.

H I G H WAY & C R U I S E P E G S 3 POSITIONS IN ONE!

LONGHORN OFFSET HIGHWAY PEGS U.S. Patent D411,440

The all-in-one answer for long-haul comfort. We combined our most popular highway peg components into one product that’s attractive, adjustable, & easy to install.

K4574 With Dually & 1-1/2” Magnum Quick Clamp (pr) U.S. Patent D405,393

K4575 With Dually & 1-1/4” Magnum Quick Clamp (pr) U.S. Patent D405,393

K7980 With Dually & 1” Magnum Quick Clamp (pr) U.S. Patent D405,393

K4616 With SweptWing & 1-1/4” Magnum Quick Clamp (pr) K7555 With Trident Dually & 1-1/4” Magnum Quick Clamp (pr)

K4575

K4616

K7555

360 ° OF ADJUSTMENT

2 T S I - T A L L , S H O RT O R I N - B E T W E E N : WE C AN FIT YOU

KOOL K OOL K KAPS APS Cover the unsightly 3/4" bolts on the end of our Highway Pegs.

K2451 For 3/4” Hex Bolts (pr) Note: Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N K400039.

REPLACEMENT SCREWS & D-WASHERS K4538 Replacement Clevis Screws with D-Washers (set) K4508 D-Washers (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

149

MADE ESPECIALLY FOR BIKES WITH LOWERS

TOUR-TECH™ ADJUSTABLE CRUISE MOUNTS K4528

FOR

1-1/4” ENGINE GUARDS

These Cruise Mounts with positive locking Quick Clamps offer an incredible range of adjustability. The entire assembly may be moved up or down on the engine guard. The arm & footpeg may be further adjusted along a vertical or horizontal arc. A unique clevis permits angle adjustment of the footpeg. The heavy-duty Quick Clamp & sturdy offset arm ensures that the footpegs will clear fairing lowers & will stay where you put them! Available with Küryakyn footrests or just mounts only for use with H-D style male mount pegs. Recommended for H-D Touring Models, Trikes, or any Model using 1-1/4” engine guards. FOR TALL RIDERS (SHORT ARM)

K4520 Mounts Only - Chrome

K4523

K7574 K4522 K4523 K7585

K7574

Mounts Only - Black ISO-Wings Dually Pegs U.S. Patent D405,393 Trident Dually Pegs

FOR SHORT TO AVERAGE HEIGHT RIDERS (LONG ARM)

K4522

K4526 Mounts Only - Chrome K7575 Mounts Only - Black K4528 ISO-Wings

ISO®-STIRRUPS WITH MOUNTS & CLAMPS

K8070

U.S. Patent D 411,440

This setup permits the use of the ISO-Stirrups on 1-1/4” engine guards. Includes Chrome Inserts.

K8070 Small ISO-Pegs

with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr)

K8071 Large ISO-Pegs

with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr)

150

K8071

K4529 Dually Pegs U.S. Patent D405,393 K7586 Trident Dually Pegs

CRUISE BOARDS FOR ENGINE GUARDS Built-in heel rests & vibration isolating rubbers provide more support & greater comfort! Interlocking tooth adjustment securely holds the mount at any angle. Clamp fits all 1-1/4” engine guards & secures with one bolt. Works great with fairing lowers. Board measures 8” long & 4” wide at widest point.

K7901 Cruise Boards for 1-1/4” Engine Guards (pr)

360° OF ADJUSTABILITY FOR TALL, SHORT OR IN-BETWEEN RIDERS

OFFSET HIGHWAY PEGS U.S. Patent D411,440

Clamp a set of these on your engine guard & enjoy all-day comfort. The clamp can be positioned forward or back & the arm offers full 360-degree rotation for Tall, Short, or In-Between riders!

K7993 3”

K4438 Pilot Pegs with Offsets & 1”

Magnum Quick Clamps (pr)

K4436

2”

K4436 Pilot Pegs with Offsets & 1-1/4” Magnum Quick Clamps (pr)

K7993 Dually ISO-Pegs with Offsets &

K7999

1-1/4” Magnum Quick Clamps (pr) U.S. Patent D405,393

K7998 Small ISO-Pegs with Offsets &

1-1/4” Magnum Quick Clamps (pr)

K7999 Large ISO-Pegs with Offsets &

K7998

1-1/4” Magnum Quick Clamps (pr)

FOOTPEGS WITH MOUNTS & MAGNUM QUICK CLAMPS

K4443

ISO ® - PEGS WITH MOUNTS

& CLAMPS

U.S. Patent D411,440

K8032 Small ISO-Pegs with Mounts & 1-1/4” Magnum Quick Clamps (pr)

K8032

K8033 Large ISO-Pegs with Mounts & 1-1/4” Magnum Quick Clamps (pr)

K7992 Dually ISO-Pegs with Mounts & 1-1/4”

K7992

Magnum Quick Clamps (pr) U.S. Patent D405,393

K8033

K4451 ISO-Wings with Mounts & 1-1/4” Quick Clamps (pr)

PILOT™ PEGS WITH MOUNTS

& CLAMPS

U.S. Patent D411,440

K4451

SWITCHBLADES WITH MOUNTS

K4435 & CLAMPS

K4435 Pilot Pegs with Mounts & 1-1/4” Magnum Quick Clamps (pr)

U.S. Patent D411,440; D506,707 & 6,893,038

K4443 Switchblades with Mounts & 1-1/4” Magnum Quick Clamps (pr)

X-TENSION This footpeg mount allows one to fine tune their riding position. Measuring 4-1/2” long with a 1-1/4” offset, the rider may now increase or decrease the reach to the highway peg. The X-Tension mounts with a 1/2”-13 bolt & may be used on OEM highway peg mounts, some forward control plates, with Magnum Quick Clamps, etc. It will accept any H-D style male mount footpeg.

4-1/2” 1-1/4”

K4515 X-Tension (pr) K4501 X-Tension with Dually & 1-1/4” Magnum Quick Clamp (pr)

U.S. Patent D405,393 & D411,440

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

151

N E W R EDUCED R E ACH FLI P B L AD ES PUT TH E AR M 2 " CLOSER THAN O RIGINAL FLI P B L AD E ( ILLUSTR ATED B ELOW )

MAGNUM™ QUICK CLAMPS

U.S. Patent D411,440

Stainless steel construction for superior strength & hinged construction for fast simple installation. No more stripped bolt heads common of 3-piece designs.

K7940 K1002 K7941 K8073 K1003 K1000 K7942 K1001

Original

1” I.D. Fits Some Aftermarket Engine Guards (ea) 1” I.D. Fits Some Aftermarket Engine Guards (pr)

Recommended for 33" or longer inseams

1-1/8” I.D. Fits Many H-D Frame Downtubes (ea) 1-1/4” I.D. Fits H-D Engine Guards (ea)

Reduced Reach

Black 1-1/4” I.D. Fits H-D Engine Guards (ea) 1-1/4” I.D. Fits H-D Engine Guards (pr) 1.35” I.D. Fits Metric Cruiser Frame Downtubes (ea)

1-1/2” I.D. Fits Boss Hoss (pr) Note: All clamps have a 1/2” hole for peg mount.

PEG MOUNTS WITH MAGNUM QUICK CLAMPS

U.S. Patent D411,440

This setup will allow the use of any H-D style male mount pegs with our innovative Magnum Quick Clamps & Clevises for engine guard applications.

Recommended for 32" or shorter inseams

K4573 Chrome 1-1/2” Magnum Quick Clamp w/Clevis (pr) K7944 Chrome 1-1/4” Magnum Quick Clamp w/Clevis (pr) K7572 Gloss Black 1-1/4” Magnum Quick Clamp w/Clevis (pr) K7572 A R M S FO L D AWAY D I S C R E E T LY W H E N

K7944

3-1/4”

NOT IN USE

K7571

2-1/2”

LONGHORN OFFSET PEG MOUNTS U.S. Patent D411,440

It’s 3-1/4” radius gives an incredible 6-1/2” range of adjustment. It’s gently curved shape keeps the peg tucked in toward the center line of the bike for maximum comfort. Guaranteed not to slip.

K7985 Longhorn Offset w/1” Magnum Quick Clamps (pr) K7986 Longhorn Offset w/1-1/4” Magnum Quick Clamps (pr) K7571 Black Longhorn Offsets w/1-1/4" Magnum Quick Clamps (pr)

K4577 Longhorn Offset w/1-1/2 ” Magnum Quick Clamps (pr)

152

LONG RIGHT ANGLE MOUNTS WITH LONGHORN ISO - PEGS

The answer for installing highway pegs on frame downtubes. The right angle design allows the peg to be positioned horizontally regardless of the angle of the frame downtube. The added length of the Longhorn Peg makes for incredible comfort. Select the correct size Magnum Quick Clamp for your application (sold separately).

K7539 Long Right Angle Mounts with Longhorn ISO-Pegs (pr)

K7541

FLIP BLADES Adding the comfort of highway pegs to your ride doesn’t have to mean extra clutter. These stealthy highway pegs simply bolt in place on the bottom of the Traditional or Swept Wing H-D floorboard. When deployed, they fold out & lock into place, much like a pocketknife blade. A release lever allows them to return to their original, almost invisible position when not in use. A hinge allows them to fold up & back if cornering touch-down occurs.

REDUCED REACH FLIP BLADES Reduced Reach Flip Blades position the pegs closer to the rider & angle them rearward. Relative to the original Flip Blades, the inside end of the peg is moved rearward almost 2” & the tip of the peg is moved rearward almost 3”.

K7540

FOR TRADITIONAL BOARDS

Fits: ‘84 and up Electra Glides (except ‘04-‘05 FLHTCSE & ‘06 and up FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE)'11 and up Road Glide Ultras (except FLTRUSE) ‘94 and up Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09 and up Trikes & all ‘86-‘08 FLST/FLSTC, ’90 and up FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC, '12 and up Dyna Switchback

K7540 Flip Blades (pr) K7556 Reduced Reach Flip Blades (pr) Note: Not recommended for use with fairing lowers.

FOR SWEPT WING BOARDS

Fits: ‘06 and up FLHX, ’10 and up FLTRX, ‘04-‘07 FLHRS, ‘04-‘05 FLHTCSE, ‘06 and up FLHTCUSE, ‘07-’08 FLHRSE, ‘09 FLTRSE, ’10-’12 FLHXSE, ’10 and up FLSTSE, ‘11 FLTRUSE, '12 and up FLTRXSE or any H-D Model with Swept Wing shape boards

K7541 Flip Blades (pr) K7557 Reduced Reach Flip Blades (pr) REPLACEMENT COMPONENTS

K7542 Replacement Wear Guards (pr) K7543 Replacement Rubber Pads (pr) WORKS GREAT FOR DRIVER OR PASSENGER!

PEG MOUNTED CRUISE MOUNTS WITH MALE ADAPTERS

It’s a real challenge to mount a set of highway pegs on a forward control equipped bike. We’ve done it at last with this very adjustable set-up. Fastening between the forward control & the footpeg, these cruise mounts accept any Küryakyn footpeg in the primary location & any male mount footpeg in the cruise location.

K7887 Peg Mounted Cruise Mounts with Male Adapters (pr)

Note: Primary foot position only accepts the following Küryakyn Pegs: Stiletto, Flamin', Switchblade, Dually, Large ISO, Small ISO, Retro, Pilot & ISO-Wing.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

153

ADJUSTABLE CRUISE PEG MOUNTS FOR FLOORBOARDS Add the comfort of cruise pegs & keep your clean simple style! Bolt directly onto your floorboards & allow full adjustability for optional foot positions. Choose 2" or 4" arms to fit H-D’s Traditional & Swept Wing floorboards. Male mount pegs sold separately. FOR TRADITIONAL BOARDS

Fits: ‘84 and up Electra Glides (except ‘04-‘05 FLHTCSE & ‘06 and up FLHTCUSE), ‘84-‘96 Tour Glides, '98-'09 Road Glides (except '09 FLTRSE),'` 11 and up Road Glide Ultras (except '11 FLTRUSE) ‘94 and up Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09 and up Trikes & all ‘86-‘08 FLST/FLSTC, ’90 and up FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC, '12 and up FLD

K7535 2 Inch Arms (pr) K7537 4 Inch Arms (pr) FOR SWEPT WING BOARDS

K7538

Fits: ‘06 and up FLHX, ’10 and up FLTRX, ‘04-‘07 FLHRS, ‘04-‘05 FLHTCSE, ‘06 and up FLHTCUSE, '07-'08 FLHRSE, ‘09 FLTRSE, ’10 and up FLHXSE, ’10 and up FLSTSE, '11 FLTRUSE, '12 and up FLTRXSE or any H-D Model with Swept Wing shape boards

K7536 2 Inch Arms (pr) K7538 4 Inch Arms (pr)

Arm When Folded In

ADJUSTABLE MUSTACHE™ BAR FOR SOFTAIL & DYNA We’ve taken our tried & trued Mustache Bar & brought it into the 21st Century. The great function of the mustache bar has stayed the same - adding the extra peg positions you need on those cramp-inducing hauls. The difference between old & new lies within the ability to be adjusted to fit virtually any rider. Due to its cleverly designed clamp system, this mustache bar can be moved up or down the downtubes & the bar can be rotated to provide multiple fore & aft adjustments. Ride on in comfort! Accepts any H-D style male-mount pegs (sold separately).

K7548 Fits: All ’86 and

up Softail Models Including Rocker (ea)

K7862 Fits: All ’91 and up Dyna Models (ea)

154

FLIP BOARDS

Patent Pending

Have it all! A great looking floorboard that features a flip-out cruise peg & multiple mounting positions. Mount up to 2-1/2” forward & back & 3/4” out over the stock board position. These boards measure 15-3/8” long by 4-7/8” wide & feature a much larger footprint than stock. Choose from two styles, Premium or ISO to perfectly match your ride. Fits: ’83 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, ’86 and up FLST Models, & '12 and up Dyna Switchback

K4377 Premium Flip Boards (pr) K4378 ISO-Flip Boards (pr)

K4377

REPLACEMENT COMPONENTS

K4379

Repl. Wear Bars for Flip Board Pegs (pr)

K4381

Repl. Wear Bars for Flip Board Boards (pr)

K4383

Repl. Premium Pads for Flip Boards (pr)

K4385

Repl. ISO-Pads for Flip Boards (pr)

K4386

Latch Service Kit – covers both L & R Boards (ea)

K4387

Repl. Rubber Pads for Flip Board Pegs (pr)

E A SY H E E L -AC TI VATE D D E P L OY M E NT

K4378

ADJUSTABLE CRUISE PEGS FOR SPORTSTER

These super adjustable cruise pegs for Sportsters are quick & easy to install & provide a wide range of adjustment. They bolt securely to the welded cross brace near the bottom of the downtubes & work on models with or without forward controls. Accepts any H-D style male mount footpegs (sold separately).

K7868 Fits: ’04 and up Sportster (ea) K7869 Fits: Late ’84-‘03 Sportster (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

155

CRUISE ARM MARK III This design allows easy installation by simply drilling mounting holes in the steel floorboard base for the adjustable mount & full-length reinforcing plate. The entire assembly mounts to the floorboard. The reinforcing plate adds stiffness to the floorboard to keep flex to a minimum. The stock rubber floorboard pads remain unaffected) The arms are fully adjustable front to back. Accepts any H-D style male mount footpeg (sold separately). Fits: ‘84 and up Electra Glides (except FLHTCU, FLHTK, ‘04-‘05 FLHTCSE & ‘06 and up FLHTCUSE), ‘84-‘91 FLTC Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE) ‘94 and up Road Kings (except ‘04-‘07 FLHRS) ’10-'11 Street Glide Trikes & ‘86-‘08 FLST/FLSTC, ’90 and up FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC IMPORTANT: ’84-’08 TOURING MODELS REQUIRE SUPPORT KIT (P/N K4533)

K7914 Cruise Arm Mark lll (pr)

Note: Not compatible with fairing lowers.

K4533 Cruise Arm Support Kit (ea)

Note: Required for’84-’08 Touring Models

Note: Only compatible with O.E.M. H-D floorboards as shown at left. Cruise Arm Mark III adjustment is limited when installed on motorcycles with engine guards.

CRUISE ARM MARK IV Turn your bike into a lazy boy with these great Cruise Arms! Heavy-duty chrome arms wrap around your stock floorboards just right, so kick back & relax! TV remote & popcorn not included. ADJUSTABLE FOR • Mounts to frame, not the board. No drilling required. ULTIMATE COMFORT! • Compatible with Küryakyn ISO-Boards & all H-D floorboards. • Offered in short arm or long arm configurations to accommodate all riders. • Each configuration allows several inches of fore & aft adjustments to fine tune positioning. • Not compatible with engine guards. • Accepts any H-D style Male Mount Footpeg, sold separately. Fit: '00 and up FLST Models without engine guards (except '05-'06 FLSTFSE)

K7840 Standard For Shorter Riders* (set) K7841 Extended For Taller Riders (set) *Adjustment of Standard Version is limited on ‘07 and up Models. Not compatible with oil coolers.

ERGO™ PLUS ENGINE GUARD U.S. Patent D513,719; 6,969,083 & 7,073,808

Combining a stylish engine guard with built-in highway pegs, the Ergo Plus Engine Guard brings innovative design to the limits. Use the highway pegs folded in or flip them out for an optional foot position! Designed with an ergonomic pull back, your feet will feel secure with less outward leg pressure no matter what position you have them in. With a slick mounting system, the Ergo Plus Engine Guard bolts directly to existing mounts on your frame & does not use any clumsy universal clamps. You’ll be back on the road with your new engine guard & the comfort of multiple foot positions in no time! CHROME

NOW AVAILABLE IN BLACK

K7532 Fits: ’97 and up Electra Glides, Street Glides, & Road Kings (ea) K7529 Fits: ’00 and up FLST Models (ea) Includes shortened replacement brake pedal. GLOSS BLACK

K7576 Fits: ’97 and up Electra Glides, Street Glides, & Road Kings (ea) K7577 Fits: ’00-’12 FLST Models (ea)

Includes shortened replacement brake pedal

156

PA S S E N G E R P E G S F I X E D & A D J U S TA B L E K4344 K7960

UNDERSEAT PEG MOUNTS FOR SOFTAIL Right out of the Sixties, these mounts will give your passenger that “breeze past the knees” chopper style riding position. Great for small passengers also. Pegs sold separately.

K7960 Chrome - Fits: ’86-’07 Softails (except

Deuce, ‘06 FLSTFSE, ‘07 FLSTF, ‘06-’07 FXST/B/C/S) (pr)

K4344 Chrome - Fits: ’08 and up Softails (pr) K4334 Black - Fits: ’08 and up Softails (pr)

PASSENGER BOARD MOUNTS

K4536 WORKS GREAT WITH OUR ADJUSTABLE PASSENGER PEGS

FOR TOURING MODELS

Chrome standard length board mounts as well as black or chrome extended mounts for added comfort or to provide clearance when installing Adjustable Passenger Pegs with Rinehart Exhaust. Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

K4536 K4569 K4537 K4561

Standard Length, Chrome (pr) Standard Length, Chrome (ea) Extended Length, Black (ea) Extended Length, Chrome (ea)

PASSENGER FLOORBOARD COMFORT MOUNTS Not all passengers are created equal. Six combinations of height & tilt & up to 2-1/2” of additional legroom ensure everyone gets to ride in comfort. Only minutes to install & adjust. Fits: ’93-’09 Electra Glides, Road Kings, Road Glides & Tour Glides equipped with passenger floorboards

K4617 Baron Passenger Floorboard Comfort Mount Kit (kit)

ERGO GUARD™ LIGHT MOUNTING BRACKETS With this simple bracket kit you can easily install Küryakyn Silver Bullets (or any other light using a 5/16” mounting screw). The kit includes two brackets & hardware to secure them to the existing holes beneath the foot rest area. Recommended options for Silver Bullets include P/N's K2303 or K2319 - See pg 94 for more details.

K2284 Ergo Guard Light Mounting

Brackets (pr) Note: If adding Silver Bullets to function as driving lights, we highly recommend using one of our Wiring & Relay Kits P/N K2328 or K2202.

ADJUSTABLE PASSENGER PEG MOUNTS FOR TOURING MODELS

ADJUSTABLE!

Direct replacements for the stock passenger floorboards. Accepts any H-D style male mount peg & adjust to any of the three stock positions—plus they rotate 360° around a 1-5/8” diameter. Fits: ’93-’12 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

K7527 Adjustable Passenger Peg Mounts (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

157

A D J U S TA B L E PA S S E N G E R P E G S

These kits give passengers the ability to move their feet from the board to the peg, or best of all, they can lay their calves on the pegs when the driver has their feet on the highway pegs. You'll love the flexibility! A bolt action locking device on the swing arm adds an intermediate position to make hours in the passenger seat more enjoyable for passengers of different heights & does not interfere with floorboard operation. SERVICE PARTS

K7882 Replacement Pin, Spring, & Knob Kit for K4505, K7926, K4570, K4571 (ea)

K4368 Replacement Pin, Spring, & Knob Kit for K4353 (ea) K7883 Pivot Shaft Service Kit for K4505, K7926, K4570, K4571 (ea) K4367 Pivot Shaft Service Kit for K4353 (ea)

E X AC TLY WH AT YO U N E E D F O R U LTI M ATE PA S S E N G E R CO M F O R T FOR '93 and up WITH STOCK PASSENGER BOARD MOUNTS & STOCK OR AFTER-MARKET EXHAUST (EXCEPT '93-'08 W/RINEHART)

'93-'06 Electra Glides (except '04-'05 FLHTCSE, '06 FLHTCUSE), Road Glides (except '00-'01 FLTRSE) Road Kings (except '02-'03 FLHRSE)

K7926

'07-'09 Electra Glides (except '07-'09 FLHTCUSE), Road Kings (except '07-'08 FLHRSE), Road Glides (except '09 FLTRSE)

K4571

'10 and up Electra Glides (except '10 and up FLHTCUSE), Road Kings, Road Glide Ultras (except '11 FLTRUSE)

K4353

'04-'05 FLHTCSE & '06 FLHTCUSE

K4570 K4505

'07 and up FLHTCUSE & '11 FLTRUSE

FOR '93-'08 WITH STOCK PASSENGER BOARD MOUNTS & RINEHART EXHAUST

158

You Need

FOR '93 and up WITH ACCESSORY PASSENGER BOARD MOUNTS & STOCK OR AFTERMARKET EXHAUST (EXCEPT '93-'08 WITH RINEHART)

You Need

'93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with Chrome K端ryakyn Mount (P/N K4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00)

K7926

'93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with Chrome or Black H-D Accessory Mounts (H-D P/N's 50378-07A, 50378-07B, 50379-07A, 50379-07B, 53070-00A, 53070-00B)

K4353

'93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with H-D Adjustable Passenger Floorboard Mount Kit (H-D P/N K50768-07)

K4505

'93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with Chrome or Black H-D Passenger Floorboard Support Kits (H-D P/N K52714-04)

K4570

You Need

'93-'06 Electra Glides (except '04-'05 FLHTCSE, '06 FLHTCUSE), Road Glides (except '00-'01 FLTRSE) Road Kings (except '02-'03 FLHRSE),

K7926 & K4537

'07-'08 Electra Glides ('07-'08 FLHTCUSE must remove the stock adjustable passenger board mounts & replace them with fixed mounts), Road Kings (except '07-'08 FLHRSE), Road Glides

K7926, K4561, & K4569

'04-'05 FLHTCSE & '06 FLHTCUSE

K7926, K4561, & K4569

FOR '93-'08 WITH ACCESSORY PASSENGER BOARD MOUNTS & RINEHART EXHAUST

You Need

'93-'08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with Chrome K端ryakyn Mount (P/N K4536) or Chrome H-D Accessory Mounts (H-D P/N K53070-00)

K7926 & K4561

'93-'08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with Chrome or Black H-D Passenger Floorboard Support Kits (H-D P/N K52714-04)

K7926, K4561, & K4569

A D J U S TA B L E PA S S E N G E R P E G S A R E T H E I D E A L S O L U T I O N T O P R O V I D E Y O U R P A S S E N G E R W I T H M U LT I P L E F O O T P L A C E M E N T O P T I O N S M U C H L I K E A H I G H W A Y C R U I S E P E G F O R R I D E R S . T H E A D J U S T A B L E P A S S E N G E R P E G S B O LT O N T O Y O U R B I K E ' S E X I S T I N G R E A R F LO O R B O A R D M O U N T R E TA I N I N G A L L F U N C T I O N S O F T H E S T O C K B O A R D S W I T H T H E A D D E D B E N E F I T O F N E W H I G H E R & F A RT H E R F O R W A R D R I D I N G P O S I T I O N S . BY P R O V I D I N G R E L I E F F R O M T H E FAT I G U E C A U S E D BY T H E L I M I TAT I O N S O F S T O C K F LO O R B O A R D S , T H E A D J U S TA B L E P A S S E N G E R P E G S A R E A M U S T H A V E F O R T W O - U P T R A V E L E R S .

VA R I O US PAS S E N G E R B O A R D M O U N T ST Y L ES A R E S H O W N A B O V E TO AS S I ST YO U I N S E L EC T I N G T H E C O R R E C T A D J U S TA B L E P A S S E N G E R P E G S F O R Y O U R A P P L I C AT I O N . T H I S I N F O R M A T I O N D O E S N O T A P P LY T O ’ 9 3 - ’ 0 8 M O T O R C Y C L E S E Q U I P P E D W I T H R I N E H A RT H E A D P I P E S . D E T A I L S F O R T H O S E A P P L I C A T I O N S A R E L I S T E D T O T H E L E F T.

STOCK BLACK FLOORBOARD MOUNT

Most common mount used from ’93-’09. ’93-’06 Models with this style mount will use Adjustable Passenger Pegs P/N K7926 & ’07-’09 Models with this style mount will use Adjustable Passenger Pegs P/N K4571.

KÜRYAKYN OR H-D CHROME PASSENGER FLOORBOARD BRACKETS

A chrome version of the stock ’93-’06 mount sold as Küryakyn P/N’s K4569 & K4536 or H-D P/N 53070-00. Motorcycles with this style mount will use Adjustable Passenger Pegs P/N K7926.

H-D ACCESSORY PASSENGER FLOORBOARD SUPPORT KIT

Stock on ’04-’05 FLHTCSE & ’06 FLHTCUSE & sold as an accessory as H-D P/N 52714-04. Motorcycles with this style mount will use Adjustable Passenger Pegs P/N K4570.

H-D ADJUSTABLE PASSENGER FLOORBOARD MOUNT KIT

Stock on ’07-’12 FLHTCUSE & ’11 FLTRUSE & sold as an accessory as H-D P/N 50768-07. Motorcycles with this style mount will use Adjustable Passenger Pegs P/N K4505.

H-D STOCK '10-'12 FLOORBOARD MOUNT

Black finish on production motorcycles & offered in black or chrome as an accessory in H-D P/N’s 50378-07A/B, 50379-07A/B, & 53070-00A/B. This mount will retrofit ’93-’09 Models so it is not exclusive to ’10 and up motorcycles. This style of mount will use Adjustable Passenger Pegs P/N K4353.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

159

TR A N S F O R M TH E WAY YO U R ID E ! R E T R AC TA B L E PA S S E N G E R P E G S A R E DESIGNED TO TR ANSFORM A BIKE E Q U I P P E D W I T H U N C O M F O RTA B L E STOCK REAR FOOT PEGS TO A

RETRACTABLE ARM PROVIDES ALTERNATE FOOT POSITION!

C O M F O RTA B L E T W O - U P TO U R I N G MACHINE OFFERING THE ADDITION O F A N A LT E R N AT E F O O T P O S I T I O N AND THE UPGR ADE TO REAR FLOORBOARDS (IF DESIRED). THE R E T R AC TA B L E PA S S E N G E R P E G S CAN BE FOLDED BACK WHEN NOT IN U S E M A K I N G T H E M V E RY V E R S AT I L E A N D E A S Y T O U S E . S I M P LY U S E T H E C HART ON PAG E ? ? ? TO S ELEC T TH E

P/N 4352 Shown on Street Glide - Stock Footpeg is Retained

A P P RO P R I AT E PA RT S F O R YO U R B I K E

A N D K E E P YO U R PAS S E N G E R H A PPY FOR MILES TO COME .

RETRACTABLE PASSENGER PEGS ANTI ROTATION/ SPLINED MOUNTS

RETRACTABLE PASSENGER PEGS

07 and up Softail Deluxe & '08 and up Cross Bones w/Stock Rear Exhaust Support Bracket

K4371

K4389

08 and up FLSTC, FXSTC, '08-'09 FXSTB, '10 FLSTSE

K4372

K4389

00-'07 FLSTC, '06 FLST, '00-'07 FXST & FXSTB, '07 FXSTC, '00-'06 FXSTS

K4374

K4389

K8883

K4389

N/A

K4352

SO F TA I L M O D E L S

DY N A & S P O RTS T E R All Models (except '12 and up FLD)

TO U R I N G W/O O E M F LO O R BOA R DS 06 and up Street Glide, '10 and up Road Glide Custom, '04-'07 Road King Custom

SERVICE PARTS FOR P/N'S

ARM ROTATES OUT OF THE WAY WHEN NOT NEEDED

K4352, K4388, & K4389

Nut/Bushing Kit (pr) K4336 Tension Note: Services both sides.

K4337 Clevis Assembly (ea) K4376 Tapered Peg Mount with Screw (ea)

P/ N K 4 3 8 9 S H O W N O N H E R I TAG E S O F TA I L U S I N G P/ N K 4 3 74 M O U N T I N G K I T

K4389

160

P / N K 4 3 8 8 & K 4 3 51 S H O W N O N H E R I TA G E S O F TA I L U S I N G P / N K 4 3 74 MOUNTING KIT

P/N K4352 S HOWN ON STREE T G L I D E W I T H P / N K 4 3 51 P R E M I U M FLOORBOARDS

K4352

K4388

RETRACTABLE PASSENGER PEGS & REAR FLOORBOARD CONVERSION ANTI ROTATION/ SPLINED MOUNTS

RETRACTABLE PASSENGER PEGS

PREMIUM FLOORBOARDS

07 and up Softail Deluxe & '08-'11 Cross Bones w/Stock Rear Exhaust Support Bracket

K4371

K4388

K4351

08 and up FLSTC, FXSTC, '08-'09 FXSTB, '10 FLSTSE

K4372

K4388

K4351

00-'07 FLSTC, '06 FLST, '00-'07 FXST & FXSTB, '07 FXSTC, '00-'06 FXSTS

K4374

K4388

K4351

K8883

K4388

K4351

N/A

K4352

K4351

SO F TA I L M O D E L S

DY N A & S P O RTS T E R All Models (except '12 and up FLD)

TO U R I N G W/O O E M F LO O R BOA R DS 06 and up Street Glide, '10 and up Road Glide Custom, '04'07 Road King Custom

TRANSFORMER II PASSENGER FLOORBOARDS Style is nothing without function & with our Transformer II Passenger Floorboards you'll get both! Not only will your passenger have a solid & sturdy platform, they'll gain an alternate foot position 4-1/2" higher & 5-1/2" farther forward than stock by way of a retractable cruise arms. REPLACEMENT FOR H-D PASSENGER FLOORBOARDS

K4382 Fits: '93 and up Electra Glides, ’94 and up Road Kings (except ’04-’07 FLHRS, ’02-’03 & ’07-’08 FLHRSE), ’98 and up Road Glides (except ’00-’01 & ’09-’11 FLTRSE, '10 and up FLTRX, '12 and up FLTRXSE), ’93-’96 Tour Glides, & '86 and up FLST Models or '06 and up Dyna with H-D Accessory Passenger Floorboard Kits

REPLACEMENT FOR H-D MALE MOUNT FOOTPEG

Mounting components sold separately. Installation on Softail Models requires Mount Kits P/N’s K4371, K4372, K4374. Installation in place of a male mount footpeg requires P/N K8883 - pg 142.

K4380 Fits: Passenger Peg Locations – Requires Mount Kit or Adapter (sold separately)

Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener & no anti-rotation mechanism. The board will apply too much force & loosen the mount from the bike. REPLACEMENT RUBBER PADS

K4384 Full Pad Style Replacement Rubbers (10 pieces)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

161

Attention pyromaniacs: Light up your shift arm with this easy-to-install cover. Looks great by itself, but things really get blazing when used alongside our Flame Shift Linkage (P/N K1072).

K1059 Fits: ’82 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes (ea)

K1082 Fits: All ’07 and upp

K1082

Soft So ftai aill Mo Mode dels ls Softail Models

FLAME™ SHIFT LINKAGE Unique, three dimensional flames create a perfect match to the Flame Shift Arm Cover (right). Top quality ball joints provide smooth action & long life. Not stamped or laser cut. Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & ’86 and up Softail Models (except ’97-’99 FLSTS)

K1072 Flame Shift Linkage (ea) Note: Can also be used on ’93 and up Dyna Models with forward controls if Shift Linkage Extension Kit (P/N K1067) is added sold separately. p y

K1059

SHIFT LINKAGES WILD BOAR SHIFT LINKAGE

Give your bike some real attitude with the sinister red-eye stare of the Wild Boar Shift Linkage. The complete chrome steel linkage with chrome-plated ABS wild boar transforms this uneventful area of your bike in minutes.

K1073 Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & ’86 and up Softail Models (except ’97-’99 FLSTS) Note: Can also be used on ’93 and up Dyna Models with forward controls if Shift Linkage Extension Kit (P/N K1067) is added sold separately.

WIDOW® SHIFT LINKAGE The Widow takes you to a whole new level & doesn’t d cost an arm & a leg! Complete chrome steel linkage with chromeplated die-cast black widow. Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & ’86 and up Softail Models (except ’97-’99 FLSTS)

K1074 Widow Shift Linkage (ea) Notes: Can also be used on ’93 and up Dyna Models with forward controls if Shift Linkage Extension Kit (P/N K1067) is added sold separately. Not compatible with Küryakyn Inner Primary Covers on ’07 and up Softails or Touring Models.

162

CHROME SHIFT LINKAGE Beautiful chrome-plating, high-quality ball joints, & streamlined jam nuts make this shift linkage a great value for anyone looking to replace their stock shift linkage.

GIRDER SHIFT LINKAGE Shift with style! Machined from billet aluminum & then chrome-plated with care, our Girder Shift Linkage is a beautiful addition to your bike. Innovative design looks great by itself or with our Girder Shift Lever. Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; ’86 and up Softail Models (except ’97-’99 FLSTS); & ’93-’02 Dyna Wide Glides

K9054 Girder Shift Linkage (ea)

Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & ’86 and up Softail Models (except ’97-’99 FLSTS)

K1077 Chrome Shift Linkage (ea) Note: Can also be used on ’93 and up Dyna Models with forward controls if Shift Linkage Extension Kit (P/N K1067) is added - sold separately.

CUSTOM EXTRUDED SHIFT LINKAGE SERPENT ™ SHIFT LINKAGE

Patent Pending

Shift into a whole new look. Featuring a unique rustic & antique pewter finish that combines a snake, bones & barbed wire for a wicked theme. Included is a sinister skull emblem or choose your own style with the optional themed emblems.

Massive bold look. Personalize with the included red, blue & chrome lock nuts.

K9059 Fits: ’80 and up Electra Glides,

Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; ’86 and up Softail Models (except ’97-’99 FLSTS); & ’93-’05 Dyna Wide Glides (ea)

Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & ’86 and up Softail Models (except ’97-’99 FLSTS)

1079 Serpent Shift Linkage (ea) Replaces emblems in Serpent Shift Linkage K1085 (P/N K1079), Zombie Levers (P/N’s K1047, K1058, K1060), or Fender Tip Lens Grills (P/N’s K8606-8608) K1086 - Universal applications with 1” diameter flat surface K1087

EMBLEMS:

K1083 K1084

Wild Boar (ea) Dollar Sign Bling (ea)

K1067

K1088 K1089

K1063 Extended Extruded Shift Linkage -

Custom Applications, Adjusts from 15” to 15-1/2” (ea)

Eagle (ea) Rose (ea) Patriot (ea) Ace of Spades (ea) Skull (ea)

K9056

K9046

K9057

K9058

K9042

SHIFT LINKAGE EXTENSION KIT

CHROME UNIVERSAL JOINTS

BRAKE ROD COVER

Our Shift Linkage Extension Kit makes it possible to use all Küryakyn theme linkages or most any standard shift linkage on bikes equipped with extended controls. The kit includes 1-1/2” & 2-1/2” extension adapters which can be used independently or threaded together for up to 4” of extension.

K9056 Barrel Style, R.H.

Conceal your plain zinc-plated brake rod. Precision fit - Snaps on in seconds.

K1067 Shift Linkage

Extension Kit (ea)

Female Threads (ea)

K9057 Ball Joint Style, without Stud, R.H. Female Threads (ea)

K9058 Ball Joint Style, R.H.

Female Threads (ea)

K9046 Ball Joint Style with

Short Stud, R.H. Female Threads (ea)

FOR SPORTSTER

Fits: ’04 and up XL1200C, XL883C & XL1200X (Also fits ’04 and up Sportster Models equipped with H-D Accessory Forward Controls; H-D P/N’s 33395-04, 33398-04, 3339506A, 33398-06A, & 33397-07A)

9042 Brake Rod Cover (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

163

K1075 K1054

ZO ZOMBIE™ O M BI E ™ SHIFT ARM COVER

Detail; the difference between the unremarkable & the distinctive. Whether used alone or with other members of this popular collection, this cover will provide a distinctive touch sure to be caught by those with a discerning eye.

K1081

Add some character to that stock shift linkage! Our chrome steel linkage is a complete replacement for your dull stock shifter rod. Complement this shifter with our Zombie Pegs & Zombie Mirrors for a “Bad-Boy” look for your bike. Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & ’86 and up Softail Models (except ’97-’99 FLSTS)

K1075 Zombie Shift Linkage (ea)

K1054 Fits: ’82 and up Electra

Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes (ea)

Notes: Can also be used on ’93 and up Dyna Models with forward controls if Shift Linkage Extension Kit (P/N K1067) is added sold separately.

K1081 Fits: All ’07 and up

p y y Inner Primaryy Covers on ’077 and upp Not compatible with Küryakyn Softails or Touring Models.

Softail Models

SHIFT LEVERS & ARM COVERS A. SHIFTER

B. TRANSMISSION

C. FOLDING HEEL SHIFT LEVER

Covers the unsightly shifter spline after removing heel shift lever.

Instant “Chromification”! Simply bolt on our Transmission Shift Arm Cover to rid yourself of a dull stock arm.

Now your heel shift peg can quickly be tucked away with the flick of your heel leaving your left floorboard as open as the road ahead. Accepts any Küryakyn or H-D shift peg, sold separately.

SPLINE COVER

SHIFT ARM COVER

Fits: ’01 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes; all ’01 and up Softails, & all ’01 and up Dynas

K9072 Shifter Spline

Cover, 1/2” I.D. (ea)

K1068 Transmission Shift Arm Cover (ea)

164

Fits: Heel position on ’83 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes & all ’86 and up FLST Models

K1069 Folding Heel Shift Lever (ea)

1-3/4” LONGER THAN STOCK

EXTENDED GIRDER SHIFT LEVER Our Extended Girder Shift Lever is the perfect complement to our Extended Girder Brake Pedal. With an 8” length, it’s about 1-3/4” longer than a stock Touring or FLST shift lever. It works as both front or rear on floorboard equipped Harleys. This chrome beauty will give you a lot of additional room on the floorboard. Fits: Heel or Toe on ’83 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86 and up FLST Models

K1026 Extended Girder Shift Lever (ea)

K1065

LIBERATOR® & SLOTTED SHIFT LEVERS

K1066

Give your gears a little edge! Replace the everyday stock pieces on floorboard equipped Touring & FLST Models with our inventive Shift Levers. Two styles available serve as great complements to any of our other foot control accessories. Accepts any Küryakyn or H-D shift peg (sold separately). Fits: Heel or Toe on ’83 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86 and up FLST Models

K1065 Slotted Shift Lever (ea) Stock Length

K1066 Liberator Shift Lever (ea) K1046

K1045

K1048 K1043 K1044

HEEL SHIFT LEVER ELIMINATORS These premium quality accessories quickly & easily allow you to remove the heel shift lever on Dressers, Road Kings, or any FLST Model. Unique design keeps the shift shaft in perfect alignment to avoid premature shaft wear, a problem common to similar products. The Delrin® lining eliminates rattles & keeps your bike shifting as smoothly as ever.

K1045 Fits: ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes (ea)

K1046 Fits: ’86 and up FLST Models (ea)

FRONT SHIFT ARM ACCENTS SILHOUETTE FRONT SHIFT ARM ACCENT

K1043 Fits: ’82-’07 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings (ea)

DECO FRONT SHIFT ARM ACCENT

K1044 Fits: ’82-’06 Electra Glides, Road Glides, Street Glides,

Tour Glides, & Road Kings WITHOUT Küryakyn Inner Primary Cover Front Extension (P/N K8370); & ’07 Electra Glides, Road Glides, Street Glides, & Road Kings WITHOUT Küryakyn Inner Primary Cover (P/N K8397) (ea)

K1048 Fits: ’82-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings WITH Küryakyn Inner Primary Cover Front Extension (P/N K8370); & ’07 Electra Glides, Road Glides, Street Glides, & Road Kings WITH Küryakyn Inner Primary Cover (P/N K8397) (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

165

BRAKE PEDALS & PA D S EXTENDED BRAKE PEDALS

K1071

FOR FLOORBOARD EQUIPPED MODELS

K9061

K1070

K1027

Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes K1070 Extended Liberator Brake Pedal (ea) K1071 Extended Girder Brake Pedal (ea)

The answer to more leg room on floorboard equipped H-D Models! Levers move the location of the brake pedal pad forward & down while flattening the angle of the pad. Now your foot is no longer “under” the brake pedal, resulting in easier & more natural braking. All levers are beautifully polished & chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation & long life.

Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, Road Kings; & ’87 and up FLST Models

K9061 Extended Brake Pedal (ea) K1027 Girder-Style Extended Brake Pedal (ea)

Note: On ’02 and up Models our Extended Brake Pedals provide slightly more extension than stock but the brake pedal pad is lower & flatter, making the transition from board to brake more natural.

K4456

5-1/2" L

K8652

BRAKE PEDAL ARM COVER This custom overlay puts a stylized chrome & black profile on the stock rear brake arm. High strength peel-&-stick adhesive allows fast, easy installation. Fits: ’02 and up Electra Glides, Road Glides, Street Glides, Road Kings, Trikes & ’02 and up FLST Models

K8652 Brake Pedal Arm Cover (pr)

166

EXTENDED BRAKE PEDAL PAD FOR FL A full 1” wider than stock (& most other custom brake pedal pads)! This great looking pad helps keep the rear brake control more accessible. A unique clamshell design assures simple, quick installation. Fits: All ’80 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, all ’86 and up FLST Models, & '12 and up Dyna Switchback

K4456 Extended Brake Pedal Pad (ea) Note: Not compatible with fairing lowers on ’04-Earlier Touring Models.

BRAKE B R PEDAL PAD EXTENSION & P R PREMIUM EXTENDED BRAKE PEDAL PAD Does your air cleaner stick out a bit further than you’d like? The added 1-1/4” leng ng makes it easier to apply the rear brake. The Brake Pedal Pad Extension length ((P/N (P /N K1078) includes a chrome extended “base” with D-shaped rubber pad & reuse reuses the bike’s stock rubber pad & hardware. The Premium Extended Brake PPedal Pe d Pad (P/N K7587) is a complete assembly that provides additional length da w wi ith styling to complement other Kuryakyn Premium accessories. with

K7587

K1078 Brake Pedal Pad Extension (ea)

Fits: ’06 and up Street Glides, ’10 and up Road Glide Customs, ’04-’07 Road King Customs, & any models equipped with H-D’s Streamliner Brake Pedal Pad (H-D P/N 42712-04)

K1078

K7587 Premium Extended Brake Pedal Pad (ea)

K1078 7with 1078 Installed Installed Stock Rubber Padwith stock rubber pad

Fits: All ’80 and up Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes, all ’86 and up FLST Models, & '12 and up Dyna Switchback

Note: Not compatible with Fairing Lowers on '04-earlier Touring Models. Model

K7587

F O RWA R D C O N T R O L S K9063

K9064

K9049

Shown with Pilot Pegs, Stirrups & Brake Pedal Pad - Not Included Kit Includes ISO-Brake Pedal Pad & ISO-Shift Peg - Not Shown

FORWARD CONTROLS FOR DYNA

3” EXTENSION KIT

Forward controls made simple. Flush, countersunk fasteners used for a clean, uncluttered appearance. All ball joints, linkages, & visible hardware are chrome finished. Igus shifter bearings provide smooth, maintenance-free operation. These controls offer outstanding good looks, are user-friendly, & provide excellent value in a moderate price range. Footpegs not included.

FOR DYNA WIDE GLIDE FORWARD CONTROLS

Fits: ’90 and up Dyna

K9063 Standard Forward Controls (ea) K9064 Extended Forward Controls (ea) Note: Forward Controls are not compatible with most engine guards. Will not fit ’08 and up FXDF, ’09-’10 FXDFSE, or ’10 and up FXDWG if equipped with stock exhaust. W E S U G G E S T T H E S TA N D A R D C O N T R O L S ( P / N K 9 0 6 3 ) F O R R I D E R S W I T H A 3 3 ” O R S H O RT E R I N S E A M

Welcomed relief for tall Dyna Wide Glide riders. Move your stock forward controls a full 3” forward. The set includes extension plates, countersunk trim plates, linkages, & all hardware. All chrome components. Only basic hand tools are needed to complete this easy installation.

K9062 Fits: ’93 and up FXDWG & any Dyna Models using H-D Forward Controls (P/N 49080-93A) (ea)

K9049 Fits: ’03-’08 FXDWG & any Dyna Models using H-D

Forward Controls (P/N 49080-03 or 49080-06) (ea)

Note: P/N K9049 will also fit ’08 and up FXDF, ’09-’10 FXDFSE, or ’10 and up FXDWG if stock exhaust has been removed & replaced with a staggered dual system.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

167

FRONT END A L S O AVA I L A B L E 1. L.E.D. HALO TRIM RING PG 101 2. DRIVING LIGHTS PG 103 3 . L I G H T E D BAT L AS H ES PG 174

A K8635

C B

D E

168

A. UPPER FORK SLIDER COVERS You’d be amazed at the amount of time, materials & labor required to simply replace the stock stainless fork slider covers with chrome ones. Our Upper Fork Slider Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers - no need to disassemble the front end!

A K7211

Fits: ’96 and up Electra Glides, Street Glides, & Trikes

K8635 Chrome - Upper Fork Slider Covers (set)

K7211 Gloss Black - Upper Fork Slider Covers (set)

K7218 Gloss Black - Slotted Upper Fork Slider Covers (pr)

K7219 Chrome - Slotted Upper Fork Slider Covers (pr)

E K7789

Rendering Shown

D K7212

A K7218

A K7219

Rendering Shown

B. FRONT

D. LOWER LEG

FENDER SIDE TRIM

DEFLECTOR SHIELDS

It just keeps getting better! These sleek, chrome strips are a great addition to your front fender. Installation is quick & easy getting you back on the road in no time.

Keep those legs looking good! These irresistible chrome accents not only look good but also protect your factory lower fork legs from the notorious “sand blasting” caused by road debris. Installation is effortless - no tools required. All include Fender Boss Covers except P/N K7765.

Fits: ’06 and up Street Glides, ’98-’09 Road Glides, ’10 and up Road Glide Customs, ’11 and up Road Glide Ultra, ’10-’11 Street Glide Trikes, ’04-’07 Road King Customs, ’04-’05 FLHTCSE, ’06 and up FLHTCUSE, ’00-’01 & ’09 FLTRSE, ’02-’03 & ’08 FLHRSE, ’10 and up FLHXSE, ’11 FLTRUSE, '12 and up FLTRXSE, '12 and up FLD

TOURING

K7786 Front Fender Side Trim (pr)

C. FRONT

FENDER ACCENTS The clean, unadorned fenders on many Touring Models look sharp but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. Fits: ’06 and up Street Glides, ’98-’09 Road Glides, ’10-'12 Road Glide Customs, ’11 and up Road Glide Ultra, ’10-’11 Street Glide Trikes, ’04-’07 Road King Customs, ’04-’05 FLHTCSE, ’06-’12 FLHTCUSE, ’00-’01 & ’09 FLTRSE, ’02-’03 & ’08 FLHRSE, ’10 and up FLHXSE, ’11 FLTRUSE, '12 and up FLTRXSE, & '12 and up FLD (Leading edge only)

K8642 Leading Edge (ea) K8643 Trailing Edge (ea)

K7768 Chrome - Fits: ’00 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (pr)

K7209 Gloss Black - Fits: ’00 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (pr)

K7213 Chrome - Fits: '84-'99 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (pr)

SOFTAIL

K7765 Fits: ’86 and up FLST Models (except FLSTSB, FLSTS,

FLSTSC); ’91-’10 FXST, FXSTB, FXSTC; ‘93-’05 FXDWG, & ’06 and up Dynas (except ’07-’08 FXDSE, ’08 and up FXDF, ’09-’10 FXDFSE, 12 and up FLD) (pr)

K7212 Fits: ’86 and up FLST Models (except FLSTSB, FLSTS,

FLSTSC), ’91-’10 FXST, FXSTB, FXSTC, ’93-’05 FXDWG (pr)

E. CALIPER COVERS

FOR BREMBO CALIPERS

Chrome your calipers without spending a ton of money. Bolt-on in minutes regardless if the bike has ABS or not. The slotted design keeps the air flowing so brake performance is unaffected. Fits: Front Calipers on ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings & Trikes; ’06-11 V-Rods (except ’06-’07 VRSCR Street Rod & ’09-’11 VRSCF V-Rod Muscle)

K7789 Caliper Covers for Brembo Calipers (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

169

GROOVED GROOVED Spun Blade Spun Blade Pointed Zombie Chrome Black/Aluminum

Peaked Roman

Twisted

Stiletto

Nut Covers

Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)

K1224 K1225

K1226

K1227

K1232

K1235

K1217

K1205

K1201

Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dyna (except ’04-’05 FXDWG & ’07 FXDSE) (pr)

K1224 K1225

K1226

K1227

K1233

K1236

K1218

K1212

K1213

Fits: ’07 and up Softails (except Deuce, Springer & Rocker), ’08 and up Electra Glides, Road Glides, Street Glides & Road Kings, ’08 and up Dynas (except ’08 FXDSE), ’08 and up Sportsters, ’02 and up V-Rod (except VRSCR & VRSCF) (pr)

K1224 K1225

K1226

K1227

K1234

K1237

K1219

N/A

K1214

K8625

FORK SKINS A chromed front end at a fraction of the cost! Our Fork Skins will chrome out 39mm front ends & provide the improved handling associated with a fork brace. Quick & easy to install.

K8625 Fits:’88-’99 Sportster, Dyna & FXR with Single Disc 39mm Front Ends

K7202 Fits: ’04-’07 Single Disc, ’08 and up Sportster

Models (except '09 and up XL883N, '08 XL1200R, '08 and up XL1200N, '10 and up XL1200X, '10 and up XR1200/X (pr)

LOWER LEG COVERS FOR SOFTAIL K8633

We make chroming your front end quick, easy, & affordable. Stylized stamped steel covers simply bolt securely into place right over stock lower legs! The version for ’00-’07 Models also includes a matching caliper cover.

K8632 Fits: ’86-’99 FLST Models (except Springer) (pr) K8633 Fits: ’00-’07 FLST Models (except Springer) (pr) K8634 Fits: ’08 and up FLST Models (except Springer) (pr)

LOWER LEG ACCENTS FOR TOURING MODELS U.S. Patent 7,637,520

An easy, low cost way to put a flawless chrome finish your lower legs (from the fender mounting bosses down) & the brake calipers. Chromed stamped steel.

K8630 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings (set)

K8630

K8631 Fits: ’08 and up Electra Glides, Road Glides, Street Glides, & Road Kings without ABS (set

Note: This set does not include caliper covers.

170

K1237 F

E K1232

A C T U A L LY S P I N AT 25 MPH!

Rendering Shown

B K1225

K1226

AXLE CAPS Clean up your bike's front end with any of these great looking custom axle caps. Choose the cap's that best fit your style including the "Spun Blade" line featuring a unique chrome spinner that moves as you ride & the Roman or Peaked series designed to fit an array of applications. No matter what you choose, any Küryakyn Axle Cap is sure to add an element of unparalleled styling to your ride.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

171

INTERCHANGEABLE EMBLEMS!

FRONT & REAR LENS GRILLS K7795

WITH EMBLEMS

Sometimes less is more. Our lens covers maximize the light’s impact with fine illuminated slots & two theme emblems. The eyes of the Zombie & the backlighting of the Flame design shine ominous red for a compelling effect that’s impossible to ignore.

K7795 Front Fender Tip Lens Grill (ea)

Fits: ’80 and up Electra Glides, Tour Glides, Road Kings, Trikes & '86 and up FLST Models with Front Fender Tip Lights

K7793 Rear Fender Tip Grill (ea)

K7798

Fits: '80- '08 Electra Glides, Tour Glides, Road Kings, & '86 and up FLST Models with Rear Fender Tip Lights

K7793

K7798 Rear Fender Tip Lens Grill (ea)

Fits: ’09 and up Electra Glides with Rear Fender Tip Lights

FRONT FENDER SKIRT ACCENT Go from down & dull to classy & chrome! It chromes the lower portion of your front fender without having to disassemble or even fumble with any tools. Made from chrome-plated stamped steel. Fits: ’80 and up Electra Glides, Tour Glides, & Road Kings with original equipment front fender skirt & ’86-’08 FLSTC Heritage Classic, ’86-’90, ’06 FLST Heritage; & ’93-’96 FLSTN Heritage Nostalgia or Special with original equipment front fender skirt

K7794 Front Fender Skirt Accent (ea)

DECO FRONT FENDER REFLECTOR GRILLS

FENDER TIP LENS GRILLS

Give your reflectors some much needed style. Stock reflectors function with their original intent.

K7792 Fits: ’94 and up

FLHTC, ’94 and up FLHTCU, ’10 FLHTK, ’94-’96 FLTCU (pr)

This unique design embeds custom emblems in a bold chrome grill. Each set includes both front & rear lens grills. Fits: ’80-’08 Electra Glides, Tour Glides, Road Kings & ’86 and up FLST Models with front & rear fender tip lights

K8606 Zombie (pr)

K7787

K9012

K9013

FENDER TIPS

FENDER EXTENSION

These fender tips add a nostalgic touch to any bike in seconds! Models are available to fit most OEM H-D fenders. Simple installation requires no drilling & can be done without any tools. A great way to cover dinged fender tips.

FOR NARROW FRONT FENDERS

K9012 Fits: Narrow H-D Front Fenders on FXST, XL, FXDWG, Dyna, & FXR Models (Leading Edge) (ea)

K9013 Fits: All ’90 and up Fat Boy Front Fenders (Leading Edge) (ea) K9014 Fits: All ’90 and up Fat Boy Front Fenders (Trailing Edge) (ea) K9015 Fits: ’90-’06 Fat Boy Rear Fenders (except ’06 FLSTFSE) (ea) K7787 Fits: ’07 and up Fat Boy, '10 and up Fat Boy Lo & ’06 FLSTFSE Rear Fenders (ea)

172

Enjoy a dryer ride in the rain, a cleaner engine, & a subtle hint of sparkle. A molded-in contour hugs the stock H-D narrow fender tightly for a look so clean you’d swear it was part of the original fender! Fits: Narrow H-D front fenders on FXST, XL, FXDWG, Dyna & FXR Models

K9016 Front Fender Extension (ea)

K1291

K2013 B K7333

K8135 K8134

A K7332

K2014

FULL COVERAGE CALIPER COVERS

K1291 Front Caliper Cover (ea)

Fits: All ’84-’99 Models, ’00-’07 FLSTS/ FLSTSC/FXSTS, & ‘08-’11 FLSTSB

CHROME HUB FILLERSPEEDO DRIVE COVER Fits: ’87 to ’96 Softails (except Fatboy) & ’93-’96 Wide Glides Models to ’95 (except 39mm front ends) (ea)

Light weight ABS design. Peel-&-stick application.

K7333 Fits: Late Model Touring Models & Softails - Universal Front Fenders with approximately 15-1/4” radius (ea)

K2013 Bleeder Screw Cover (pr)

Fit: All ’84 and up stock H-D calipers (except ’08 and up Touring)

C. O R N A M E N TS

Fits: ’84 and up H-D master cylinder & calipers (except ’08 and up Touring master cylinder & caliper, ’08 and up Softail & Dyna calipers & ’04 and up XL master cylinder & caliper)

Note: Replacements for Küryakyn Saddlebag Latch Accents (P/N K1595).

K1492 Small Zombie (Requires 1” of flat surface for mounting) (pr)

Note: Replacements for Küryakyn P/N’s K1047, K1058, K1060, K7520, K7521, & K8606 Note: See additional Medallions on pg 177.

Patent Pending

B. D ECO E AG L E F E N D E R O R N A M E N T

BRAKE BLEEDER SCREW & BANJO BOLT COVERS

2” of flat surface for mounting) (pr)

A. F RO N T F E N D E R S P E A R

Front Fenders with approximately 15-1/4” radius (ea)

Narrow Glide Front Ends (ea)

K1491 Large Zombie (Requires

FENDER ORNAMENTS

K7332 Fits: Late Model Touring Models & Softails - Universal

K8135 Speedo Drive Cover for 39mm

ZOMBIE™ MEDALLIONS

K9022

Measures 1-1/4" Wide x 8" Long. Peel-&-stick application.

K8134 Chrome Speedo Drive Cover Fits all

K2014 Banjo Bolt Cover (ea)

K9026

Majestically sculpted with lighted eyes!

K9022 Wild Boar (ea) K9026 Eagle (ea)

CHROME REFLECTOR COVERS

FORK BRACE

Fits: Front Downtubes: All ’92-’08 H-D Touring Models (Electra Glides, Road Kings, etc.), all ’91-’99 Softail Models, & all ’91-’99 Sportster Models - Other motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector

By reducing fork flex, one can enjoy more aggressive, controlled cornering, smoother ride, & straighter, more predictable hard stopping.

K9001 Chrome Reflector Covers (pr)

FOR WIDE GLIDE®

K8620 Fits: 41mm Wide

Glide Front Ends found on ’80-’86 FXWG, ’93-’05 FXDWG, & ’85-’10 FXST Models (except Springer, Deuce, Rocker/C) (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

173

C B

K1198

A. BAT BROW

B. BAT LASHES

Fits: ’96 and up Electra Glides, Street Glides, & Trikes

K7796 Bat Brow (ea)

K8695 Chrome - Bat Lashes (pr) K7269 Black Chrome - Lighted Bat Lashes (pr)

Patent Pending

K7753 Chrome - Lighted Bat Lashes (pr)

K1199

Patent Pending

C. WINDSHIELD TRIMS Fits: ’96 and up Electra Glides, Street Glides, Trikes, Küryakyn AirMaster Fairing

K1379

K1379 Deluxe Windshield Trim (ea)

K1189 Replacement

Emblem for Zombie Windshield Trim (ea)

K1199 Eagle Windshield Trim (ea) K1198 Zombie Windshield Trim (ea)

K1369 Windshield

Mounting Spikes - 1/4-20 x 5/8” (set/3)

K1342 Replacement Caps for Deluxe Windshield Trim (ea)

D. RUN-TURN EDGE ACCENTS D

FOR BATWING FAIRING

K3724

Patent Pending

A nice subtle touch of chrome & additional lighting to create a unique look. Perfectly contoured to follow the lines of the outer edge on the inner fairing, the addition of auxiliary run & turn lighting make this a must have. Installation requires no drilling or modification to the fairing.

K3724 Fits: ’96 and up Electra Glides, Street Glides, & Trikes (pr)

174

Patent Pending

OUTER FA I R I N G BRING YOUR BATWING FAIRING TO LIFE! The keys to good looks are keeping it simple & highlighting the contours. Choose any or all of our simple to install, brilliant chrome accents to give your fairing a bold new style!

K7796 K7269

C K1379

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

175

I N N E R FA I R I N G

K881 & K882 pg 80 K3785 pg 179

DELU XE GAU G E B EZE LS Our Bezels blend beautiful chrome rings with tasteful, colored accents. The rubber-like accent is captured by the press-on chrome ring. Each pair of bezels includes black, red, & blue accents.

K3781 Large Deluxe Gauge Bezels with

Colored Accents (pr) Fits: ’00 and up Electra Glide, Road Glide, Street Glide, & Trikes speedometers & tachometers

K3782

176

K3782 Small Deluxe Gauge Bezels with

Colored Accents (pr) Fits: ’86 and up Electra Glide, Road Glide, Street Glide, & Trikes voltmeter, oil pressure, air temp, & fuel gauges

K7210

K3767

INNER COVER PLATES Our stylized accents cleverly cover the mounting holes left by stock mirrors. High strength peel-&-stick adhesive makes installation a snap. Fits: ’06 and up Street Glides & ’10-’11 Street Glide Trikes

K3767 Chrome (pr) K7210 Gloss Black (pr)

INNER FAIRING The problem with beautiful scenery on any ride is that once you pass it, it’s gone. Well here’s one great view that’ll be with you every time you’re in the saddle! Fits: ’96 and up Electra Glides, Street Glides, & Trikes

A. S P E E D O & TAC H B ROW Undemanding & understated. Its thin profile allows for a perfect highlighted contour without being too much.

K7746 Speedo & Tach Brow (ea)

B. I N N E R FA I R I N G ACC E N T

C. SW I TC H PA N E L ACC E N T U.S. Patent D629,337

K3766 Inner Fairing Accent (ea)

K3783 Switch Panel Accent (ea)

D. STEREO ACCENT K3765 Stereo Accent (ea)

E. S P E A K E R G R I L L S K3787 Zombie (pr)

K3794 Patriot (pr)

K3788 Flame (pr)

K3751 Helicopter

Gunship (pr)

K3789 Widow (pr)

K3753 Firefighter (pr)

K3790 Chauvinist (pr)

P/N's K3713 & K3714 are sold as single Medallions Only.

K3793 Deco (pr)

3714

K3787

K3793 K3753

K3788

K6321 pg ??

K3794

K3790

K3751

K3787

K3713 Rendering Shown

INNER FA I R I N G COV E RS

FOR FLHT

Is your inner fairing dull or sun-faded in this area? Here's an instant fix to make this area even better than new! Peel-&-Stick! Fits: ’96 and up Electra Glides & ’09 and up FLHTCUTG Tri Glide Ultra Classics

K7267 Inner Fairing Covers (pr) Rendering Shown

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

177

FA I R I N G C H R O M E

FOR ROAD GLIDE

WINDSHIELD TR TRIM

FOR ROAD GLIDE

Three-piece set provides a smooth, flowing bridge from the fairing to the windshield. Fits: ’98 and up Road Glides

K1371 K8649

K1370 Windshield Trim for Road Glide (ea) K1371 Deluxe Windshield Trim for Road Glide (ea)

Interchangeable Zombie or Maltese Cross Emblems Included

FAIRING TRIM FOR ROAD GLIDE Making the most out of the sleek lines of this bike, our curvaceous chrome molding installs easily with high-strength peel-&-stick adhesive, & the integrated L.E.D. supplemental run/turn lights simply plug into existing wiring.

K8649 Fits: All ’98 and up Road Glides (pr)

K1370

K8649

K7768 K7789

178

A. NACELLE ACCENTS

A K3780

FOR ROAD GLIDE

This kit totally transforms the appearance of the Road Glide speedometer, tach, & fork nacelle. The main cover envelops the gauges & indicator lights with an elegantly sculpted shroud while the four individual accent pieces decorate the edges of the nacelle. Fits: ’98 and up Road Glides

K3780 Nacelle Accents for Road Glide (set) K3750 Switch Panel/Fork Accents Only (4 pcs)

B. GLOVE BOX ACCENTS FOR ROAD GLIDE

K3769

K3791

At first glance you’ll notice the difference; glove box doors that stand out instead of disappearing into the flat background. Also makes opening the doors a snap - even with gloves on!

K3769 Fits: ’98 and up Road Glides (pr)

C. SPEAKER GRILLS FOR ROAD GLIDE

D K3784

Plain black mesh speaker covers were pretty boring until now! Installs in seconds. Easily substitute our Chauvinist, Illiana, or Twin Ring 2” Gauge Bezels (below) for the three spoke insert.

K3791 Fits: ’98 and up Road Glides (pr)

K3785

D. GAUGE BEZELS FOR 2” GAUGES Here's a spice that appeals to the more gourmet. Three selections available to please the more discerning custom palate. Fits: ’86 and up volt meter, oil pressure, air temp or fuel gauge on Electra Glides, Tour Glides, Road Glides, Street Glides, & Trikes

K3768

K3784 Chauvinist (pr) K3785 Twin Ring (pr) K3768 Illiana (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

179

K8667

TA N K & D A S H K8669

DECO L.E.D. FUEL & BATTERY GAUGE U.S. Patent 7,652,563

K8671

The ultimate combination of form & function. The sparkling L.E.D.’s let you easily judge your fuel & battery levels out of the corner of your eye. A perfect match to our stunning new Deco Gas Cap.

REPLACEMENT GAS CAPS Vented or non-vented, these chrome-plated gas caps are a fraction of the cost of stainless steel caps. Fits: All H-D screw type tanks from ’96 and up

K7281 Fits: Replaces stock fuel gauge on

’94 and up Road Kings, ’00 and up Softails, & ’91 and up Dynas (ea) (except console mounted gauges)

K8667 Peaked Low Profile Gas Cap (R.H. Thread) - Vented (ea)

K8668 Peaked Low Profile Gas Cap (L.H.

Rendering Shown

Thread) - Non-Vented (ea)

Rendering Shown

DECO GAS CAP

K8669 Stock Style Gas Cap (R.H. Thread) - Vented (ea)

K8670 Stock Style Gas Cap (L.H. Thread) -

Add instant pizzazz to your gas tank. The sleek & stylish design looks great with almost any paint scheme. Complete the transformation with our Deco Fuel & Battery Gauge (above).

Non-Vented (ea)

K8671 Domed Low Profile Gas Cap (R.H. Thread) - Vented (ea)

K7280 Fits: ’82 and up H-D Screw-type

K8672 Domed Low Profile Gas Cap (L.H.

Tanks – R.H. Thread – Vented (ea)

Thread) - Non-Vented (ea)

FLUSH MOUNT GAS CAPS

U.S. Patent D400,838

Features an ultra slim keyed profile with a built in trim to protect the painted surface & prevent tampering. Replaces your stock gas cap. Fits: All H-D screw type tanks from ’82 and up

K8309 Flush Mount Gas Cap (R.H. Thread) - Vented (ea) K8310 Flush Mount Gas Cap (L.H. Thread) - Non-Vented (ea) K8311 Replacement Key for 8309 & 8310 (ea)

FUEL LINE FITTING COVER Cover up the plumbing on your fuel injected bike with this two-piece streamlined beauty. Fits: ’01 and up Fuel Injected Softails, ’02 and up Fuel Injected Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes, ’04 and up Fuel Injected Dynas, & ’07 and up Fuel Injected Sportsters

K1521 Fuel Line Fitting Cover (ea) K1535 Replacement O-rings (pr) K1467

PUSH BUTTON FUEL DOOR LATCH Fumbling with your keys in the dark while trying to get your gas door open is not anyone’s idea of fun. Add our Push Button Fuel Door Latch & make getting to the gas cap easy! It’s a direct replacement for the stock key-lock fuel door latch. Fits: All ’92 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Trikes

K1467 Push Button Fuel Door Latch (ea)

180

THE MARQUIS CHOKE KNOB U.S. Patent 5,836,214

Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it’s easier to find & get a hold of!

K2009 Fits: All ’88-’06 XL

Models & ’90-’06 Big Twin with stock carburetors (ea)

L.E.D. BATTERY GAUGE Keep your charging system in check with an array of red, amber & green L.E.D.'s to let you know if your bike is operating within 12.5v to14.5v as normal, drops below 10v or exceeds 15v. Simple two-wire connection & a compact size (about 2” x 3/4” x 3/16”) make installation a breeze. A daylight sensor automatically adjusts the brightness of the L.E.D.’s.

K4219 L.E.D. Battery Gauge, Chrome (ea) K4218 L.E.D. Battery Gauge, Black (ea)

INFORMER L.E.D. FUEL & BATTERY GAUGE U.S. Patent 7,652,563 A perfect match to our Flush Mount Gas Cap, The Informer’s sleek, low profile design incorporates both an L.E.D. fuel gauge & an L.E.D. battery gauge. The fuel gauge has a string of color coded L.E.D.’s to indicate fuel level & our patent pending design allows the rider to select the fuel level at which the red “empty” L.E.D. illuminates. Fits: Replaces stock fuel gauge on ’94-’07 Road Kings, ’00-’07 Softails, & ’91-’08 Dynas (except console mounted gauges)

K8375 Informer L.E.D. Fuel & Battery Gauge (ea)

K112 K1513

FORK LOCK COVER

K4015

FOR ROAD KING

Protection & beauty to keep debris from getting into your Road King’s fork lock mechanism at an affordable price.

K1513 Fits: All ’94 and up Road

King Models (ea) Note: Might need to modify key slightly to operate lock mechanism.

SPEEDOMETER VISORS K112 Fits: ’68 and up H-D Models with Large FL-Style

Tank-Mounted Speedo (FLH, FXWG, Softails, Dyna Wide Glide, ’94-’07 Road Kings) (ea)

K4015 Fits: Speedometers & tachometers with a 3-3/4” O.D. & 7/16” exposed side wall. Fits perfectly on Road Glides, ’04-’10 Sportster Customs, & many other bikes (ea)

K1522

DASH PANEL INSERTS Simple custom covers that makes a huge difference.

K1520 Fits: ’94-’07 Road Kings (except

’04-’07 FLHRS & ’07 FLHRSE) (ea)

K1522 Fits: ’00-’08 FLSTC, ’06 FLST, ’05 and

K1520

up FLSTN, ’00 and up FLSTF, ’10 and up FLSTFB, ’05-’07 FLSTSC, ’00-’03 FLSTS, ’07-’10 FXSTC, ’00-’08 FXST, ’00-’09 FXSTB, ’00-’06 FXSTS, ’93-’03 FXDWG) (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

181

MEDALLION GAUGES ®

PRE PREMIUM CONSO 5” CONSOLE GAUG E PREMIUM BAGG ER GAUG ES® ®

SKULL

USA

BOTH BAGG ER & 5” CONSOLE GAUG ES OFFER THESE GREAT FEATURES : • World Class Custom Backlit Graphics - Easy to Read Day or Night • Automotive-Grade LED Backlighting with Illuminated Pointers • Anti-Fog UV Protected Lenses • Programmable Shift Up, ABS, Check Engine, & Faux Security Telltales Hidden in the Graphics

• Auto-Dimming Graphical LCD Displays all Gear Positions 1-6, Low Fuel, Battery, Cruise, One-time Programmable Odometer, Two Trip Odometers, & Programmable Service Reminder Odometer • Designed to Replace Stock Equipment

RED TRADITION USA

Requires Medallion Riser Pod for installation - Included

P R E M I U M B A G G E R G AU G ES Fits: ‘96-’03 * Fuel Injected Electra Glide & Road Glide & ‘96-’06 * Carbureted Electra Glides, Road Glides, Street Glides

Fits: ’04-’12 Fuel Injected Electra Glides, Road Glides (except ‘12 FLTRXSE**), Street Glides (except ’11 and up FLHXSE**), & Trikes

P R E M I U M 5 ” C O N S O L E G AU G ES Fits: ‘96-’06 Carbureted Softails, ‘01-’03 Fuel Injected Softails, ‘96-’06 Carbureted Road Kings, ‘96-’03 Fuel injected Road Kings, ‘96-’06 Carbureted Dynas with 5” Fuel tank mounted Speedometer

Fits: 04-’10 Fuel Injected Softails, ’04 and up Fuel Injected Road Kings & ’04-’11 Fuel Injected Dynas with 5” Fuel Tank Mounted Speedometer

STYLE

USA

K4676

K4280

K4699

K4292

Red Tradition

K4677

K4275

K4698

K4298

Sundown

K4678

K4276

K4697

K4297

Skull

K4687

K4285

K4696

K4291

Racing White

K4683

K4283

K4695

K4290

Racing Black

K4684

K4279

K4694

K4296

P.O.W.

K4681

K4282

K4693

K4289

Just Black

K4686

K4286

K4692

K4295

Flames

K4680

K4277

K4691

K4294

Classic Blue

K4685

K4284

K4690

K4288

Classic Red

K4679

K4281

K4689

K4287

Blue Tradition

K4682

K4278

K4688

K4293

*: '96-'98 models require cable pulse generator - Not available from Küryakyn.

182

** : Will work on these models, however, 2 gauges will not be used.

JUST BLACK

ADDITIONAL FEATURES FOR PREMIUM BAGG ER GAUG ES : • Kit includes – Speedometer, Tachometer with LCD Display, Oil Pressure, Oil Temp, Fuel, Volt, & all necessary Wire Harnesses & Brackets. (Oil Temp Gauge Replaces Factory Air Temp Gauge & Includes Sensor & Wire Harness) • Easy to Follow Installation Instructions - Takes 2 hours or less to Install ®

P.O.W.

CLASSIC RED

FLAMES

SUNDOWN

CLASSIC BLUE

RACING WHITE

RED TRADITION

RACING BLACK

BLUE TRADITION

SKULLS

JUST BLACK

USA

M E D A L L I O N M O T O R C Y C L E G A U G E S A R E D E S I G N E D & B U I LT I N S P R I N G L A K E , M I C H I G A N B Y M E D A L L I O N I N S T R U M E N TAT I O N S Y S T E M S , O E M S U P P L I E R O F F E AT U R E R I C H & D I S T I N C T LY S T Y L E D I N S T R U M E N TAT I O N S O L U T I O N S F O R M I L I TA RY, M A R I N E , C O M M E R C I A L , & R E C R E AT I O N A L M A R K E T S . K Ü RY A K Y N I S E X C I T E D T O B E O F F E R I N G T H E S E B E A U T I F U L & H I G H - Q U A L I T Y G A U G E K I T S F O R M OST ' 96 - P RES E NT H A RL EY- D AVI DS O N S .

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

183

ove

K8294

K8397

K7780

'05

'06

'07

'08

'09

'10

'11

'12 & up

K8392

K8143

199

K8694

K83941

K8394

K8274

196

N/A

K8264

195

FOR ELECTRA GLIDE , ROAD GLIDE , STREET GLIDE , ROAD KING

K8389

K7877 or K7876

K8654

K8389

K8654

K8389

K8201

K8389

193

K7877 or K7876

K8201

1. Requires K端ryakyn Transmission Shroud (P/N K7877 or K7876) for installation

198

YEAR

er P

rim

ar y C

Inn

d er

ov e

B as eC

Cyl in

K7779

N/A

197

K7832

K7834

K7866

187

N/A

K1547

190

K7784

N/A

191

K7772

189

2. For Screamin' Eagles please use part numbers K8638 or K8639

K7847

K78472

K7847

K7846

197

e rs

ENGINE & FR AME CHROME

Re a

B as e

rC y lin

er Cov

Cov O il

o is s i

ut Sp o Fi I l e r

l et B

nS hro ud Tra ns m

nt cce ock A

Tap p

M r t er St a

o un t

er C ov lat o r Re g

C ov ar t er St

C O il

r ov e rC o ol e

206

K8609

K7842

K8239

Fra

REFERENCE GUIDE

Low

r ove -Fra

me C er F ron t

K2450

203

rs ov e me C M id

C ov eck N

K7254/57

202-203

l Ka Ko o

e rs C ov B ol t

184

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

185

Prim

K8291

'00

'01

'02

'03

'04

'05

'06

K8398

'08

'09

'10

'11

'12 & up

K8393

K8143

199

1. Does not fit models with hydraulic clutch

K8398

'07

198

YEAR

ov e

ar y C

I nn er

Cyl in d e

d er 2

K8395

K8204

194

FOR SOFTAIL

K7878

K8205

194

K8389

193

194 3

K7833

K8163

188

3. Except Rocker/C

K7203

2. Except Rocker/C or FLSTSC with stock head pipes

K8656

N/A

197

ve r

eC o

ver Co B as e rC y lin

Re a

issi o

ll e ac e il L in e N O

l et B

n S hro ud Tra nsm

nt cce

ENGINE & FR AME CHROME

ock A Tap p

r ov e il L in e C

K7863

K7853

188

191

K7754

N/A

189

4. FLST Models Only

K7839

N/A

s ve r b nt u

rs ov e eck C N

eC o Do w

ver Co lat o r Re g

M 4

Fra

r ov e

205

K7773

K7851

o un tC nd ic k st a K

K2450

203

me C

ov e K

era ng B oo

ap s o ol K

FOR DYNA

ENGINE & FR AME CHROME

188 N/A N/A N/A N/A N/A N/A K7836 K7836 K7836 K7836 K7836 K7836 K7836

202 K1315 K1315 K1315 K1315 K1315 K1315 1315 N/A N/A N/A N/A N/A N/A

FOR SPORTSTER

198 199 194 193 202 K8208 K8389 K8323 N/A K81431 N/A K81431 K8208 K8389 K8323 N/A K81431 K8208 K8389 K8323 N/A K81431 K8208 K8389 K8323 N/A K81431 K8208 K8389 K8323 N/A K81431 K8208 K8389 K8323 2/ K7837 K83774/ K8392 K8389 K8323 '06 K83991 K78383 2 / K7837 K83774/ K8392 K8389 K8323 '07 K83991 K78383 K78372/ K83774/ K8392 K8389 K8323 '08 K83991 K78383 4 2 K7837 / K8377 / K8392 K8389 K8323 '09 K83991 K78383 4 2 K7837 / K8377 / K8392 K8389 K8323 '10 K83991 K78383 4 2 K7837 / K8377 / K8392 K8389 K8323 '11 K83991 K78383 4 2 K8377 / K7837 / '12 & K8392 K8389 K8323 up K83991 K78383 1. Dyna with forward controls 2. Dyna with stock exhaust support bracket 3. Dyna with aftermarket exhaust 4. Dyna with Mid-Controls

PG '00 '01 '02 '03 '04 '05

YEAR

er Pri m

I nn

ry C

se C

Cy lin d

ion

Tra

Sh ro

is s

ns m

c B lo Ta p

nt ce kA c Sc o Co rpio ve n H rs

ea d

lt St a Pl u r t e r g C Con o ve n e c t r or

ENGINE & FR AME CHROME

pe t

e rs ov ck C

YEAR

K8693

203 K8693 K8693 K8693 K8693 K8693 K8693

â&#x20AC;&#x2DC;12 & up

PG '99 '00 '01 '02 '03 '04 '05 '06 '07 '08 '09 '10 '11

o K2450

K2450

203 K2450 K2450 K2450 K2450 K2450 K2450

199 N/A N/A N/A N/A N/A K7781 K7781 K7781 K7781 K7781 K7781 K7781 K7781 K7781

rB ox B cke

rs ve lt C o K ar

ps ver

Ka oo l Inn e

r te 197 N/A N/A N/A N/A N/A K7783 K7783 K7783 K7783 K7783 K7783 K7747 K7747 K7747

yC o rP r im

202 K2024 K2024 K2024 K2024 K2024 K2024 K2024 K2024 N/A N/A N/A N/A N/A N/A

Ta pp e tB lo c k A cc e Clu nt Fer tch C rul ab e le A cc e nt 193 N/A N/A N/A N/A N/A N/A N/A K7782 K7782 K7782 K7782 K7782 K7782 K7782

ver rC o St a

r de 199 K8141 K8141 K8141 K8141 K8141 N/A N/A N/A N/A N/A N/A N/A N/A N/A

Cy lin

ver 193 K8124 K8124 K8124 K8124 K8124 N/A N/A N/A N/A N/A N/A N/A N/A N/A

Ba se

Co Ta pp

B lo

ck C

ers Bo

lt C ov ers ad 194-203 K8315 K8315 K8315 K8315 K8315 K8106 K8106 K8106 K8106 K8106 K8106 K8106 K8106 K8106

186

FRAME

K7832

K8146

K7866

K7834 K7865

DELUXE NECK COVERS Just the right touch of edge & functionality. Hide those welds & wires in one quick & easy step.

K7834 Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (set) U.S. Patent D635,061

K7832 Fits: ’09 and up Electra Glides, Road Glides, Street Glides & Road Kings (set) U.S. Patent D635,061

K7866 Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (set) U.S Patent 7,762,586 & D591,207

K8146 Fits: ’95-’05 Electra Glides, Road Glides, Tour Glides & Road Kings (set)

NECK COVERS ONLY

- GLOSS BLACK

K7865 Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (pr) U.S Patent 7,762,586 & D591,207

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

187

NECK COVERS FOR HERITAGE , FAT BOY, DELUXE ,

K8163

& DEUCE

Masking the roughly finished forged frame neck on a Twin Cam Softail is now as easy K7831 as two screws & a few minutes of your time. We’ve designed smooth & cleanly contoured stamped steel neck covers to work on Softail Models equipped with fork tins (Heritage, Fat Boy, etc.) & Deuces. These beautifully chromed covers mask the wiring, giving your bike’s neck a finished appearance.

K7854 K7831 K8163 K7833

Fits: ’00-’07 Deuce (set) Fits: ’86-’99 FLSTC, FLSTF, FLSTN (set) Fits: ’00-’06 FLST, FLSTC, FLSTF, FLSTN (set)

Fits: ’07 and up FLSTC, FLSTF, FLSTFB, FLSTN (set) Note: These covers do not fit FLSTS, FLSTSC, or FLSTSB Models.

DOWN TUBE COVERS FOR SOFTAIL K7853

By popular request! Hundreds of you asked us to develop these for the Softail when you saw the ones we made for the baggers. Snap-on installation makes this an easy way to chrome the front frame down tubes.

K7843 Fits: ’92-’99 Softail Models (set) K7853 Fits: ’00-’06 Softail Models (set) K7863 Fits: ’07 and up Softail Models (except Rocker/C) (set)

NECK COVERS FOR DYNA We developed this stylized chrome cover to put a visually pleasing face on this beefy section of the Dyna frame. Welds, square edges, joints & wires are neatly hidden from view.

K7836 Fits: ’06 and up Dyna Models (except ’06-’08, ’10- and up FXDWG, & '12 and up FLD) (set)

K8673

FRONT UPPER STABILIZER LINK COVER Simply add this Front Upper Stabilizer Cover & you’ll enjoy a flashy new look to complement the improved function! Simple installation requires no tools.

K8697 Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (ea)

188

FUEL TANK CROSS-OVER LINE COVER Goes on in minutes, is easy to keep clean, easy to work with, & nothing else available will look this sweet! Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

K8673 Fuel Tank

Cross-Over Line Cover (ea)

DOWNTUBE CROSSBRACE COVER FOR TOURING Everyone loves the look of a fully chromed front end. Add shine to yours with these chrome-plated, stamped steel downtube crossbrace covers. Covers both the front & back sides of the downtube’s crossbrace above the regulator. Fits: ’99 and up Electra Glides, Road Glides, Street Glides, Road Kings & Trikes

K7774 Downtube Crossbrace Cover (ea)

K7897

LOWER FRONT FRAME COVERS Engineered to shroud the lower portion of your bike frame, these distinctive chrome-plated covers hide the kickstand assembly, front engine stabilizer & the footboard mount. Instantly simplifies a usually unsightly area of the bike.

K7897 Fits: ’91-’08 Touring Models without fairing lowers or oil coolers (ea) K7772 Fits: ’91 and up Touring Models with or without Fairing Lowers &/or Oil Coolers (ea) K7754 Fits: ’07 and up FLSTC Heritage Softail Classic, ’07 and up FLSTF Fat Boy, ’10 and up

FLSTFB Fat Boy Lo, ’07 and up FLSTN Softail Deluxe, ’08-’11 FLSTSB Softail Cross Bones, ’07 FLSTSC Springer Classic, ’10 and up FLSTSE CVO Softail Convertible (ea) Patent Pending

K7772

K7754

KICKSTAND COVERS Utilizing the stock kick stand, these easy to install covers feature a rustic antique pewter finish. For even more style add the Serpent Shift Linkage (P/N K1079). Fits: ’91-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

K1099

K1098 Silhouette (ea) K1099 Raptor (ea)

K1098

INSTALLS IN MINUTES - RIGHT OVER YOUR STOCK STAND!

BRIDGE THE GAP HEAT SHIELD U.S. Patent D523,787 Take the blues away with this perfectly designed heat shield. Quickly & easily installed, this piece integrates seamlessly & bridges the ugly gap left between the stock heat shields. Fits: ’93-’08 Electra Glides, Road Glides, Tour Glides, Street Glides & Road Kings with stock head pipes & heat shields

K9196 Bridge the Gap Heat Shield (ea)

AFTER

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

BEFORE

189

C K8655

A. REGULATOR COVER

E K2017

FOR TOURING MODELS

A complete cover for your stock voltage regulator. Two-piece design uses a stamped steel base & a chrome composite top. Open & well-vented design keeps your regulator running cool. Two functional & decoratively shaped chrome fasteners add the finishing touch. Go ahead & light ’er up! The open & vented design looks awesome when lit from the inside! We’ve left plenty of room inside to hide a Super Lizard Light or an L.E.D. Accent Light. Fits: Following Models without oil coolers - All ’97-’11 Electra Glides, ’98-’11 Road Glides, ’06-’11 Street Glides, & ’97-’11 Road Kings

B K8653 A K1547

K1547 Regulator Cover (ea) K8653

K8655

K9128

K9127

K8651

B. REAR MASTER CYLINDER COVER The super clean one-piece design covers everything – even the small related components. Simple, quick installation uses only two fasteners.

K8653 Fits: All '08 Touring Models & '09 and up Touring Models WITHOUT Fairing Lowers (except Trikes) (ea)

K7769 Fits: All ’09 and up Touring Models WITH Fairing Lowers (except Trikes) (ea) K9128 Fits: ’99-’07 Electra Glides, Road Glides, Street Glides, Road Kings, ’09 and

D. REAR MASTER CYLINDER COVER FOR XL U.S. Patent D409,119

K9127 Fits: ’84–’03 XL Models (ea)

K2017

up Trikes, & ’00 and up Softails (ea)

C. OIL PRESSURE SENDER COVER FOR TWIN CAM The difference is in the details! The simple addition of this finely sculpted chrome accessory adds life to the dull cast finish surrounding it.

K8655 Fits: ’07 and up Electra Glides, Road Glides, Street Glides & Road Kings, ’00 and up Softails & ’06 and up Dynas (ea) Note: Not compatible with oil coolers.

K8651 Fits: ’99-’06 Road Kings (except

’03 FLHRSE & ’00-’06 FLHT Standards (ea)

190

E. CLUTCH CABLE ADJUSTER COVER K2017 Fits: All ’87 and up H-D Models with stock cables & most steel braided cables 0.355” in diameter or less (ea)

K2023 Replacement Spring Clips (pr)

K7784

K7778

K7784

ENGINE GUARD MOUNT TAB COVER

OIL COOLER COVER

Every detail counts, so cover up those rust prone engine guard welds with some shiny chrome. Lightweight chrome-plated ABS, these install in just minutes. Combine with the Küryakyn lower frame covers for an unbeatable look.

Patent Pending

FOR

Fits: Stock Engine Guards on all ’97 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

’11 AND UP TOURING MODELS

Made from light weight ABS, this installs just like the factory cover & offers more chrome treatment to help hide those unsightly oil lines. Fits: Stock oil cooler on '11 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

K7784 Oil Cooler Cover (ea)

Note: Not Compatible with Küryakyn Ergo Guards or Rear Master Cylinder Cover (P/N K8653).

K7778 Engine Guard Mount Tab Covers (pr)

FRONT MOTOR MOUNT COVER

REGULATOR COVER

FOR DYNA

A stock voltage regulator normally fades into the background, but with this sharp Voltage Regulator Cover it will be right in the spotlight! Deep fins & beautiful chrome, it really stands out! Besides looking great, the smooth finish is much easier to keep clean & liberal venting lets it keep its cool. Installation? Simple – two bolts & you’re stylin’!

FOR SOFTAIL

U.S. Patent D416,227

Here’s a beautiful cover for an ugly motor mount. Easy 2-bolt installation means you’ll be stylin’ in no time.

K7839

Fits: ’91-’05 Dyna Models

K1545 Motor Mount Cover (ea)

K7839 Fits: All ’01 and up

Softail Models (ea)

K1545

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

191

ENGINE A

A. THROTTLE SERVO MOTOR COVER B

Great looking remedy to cover that ugly throttle servo motor when using a Screamin’ Eagle Stage One, Heavy Breather or any Küryakyn Air Cleaner.

Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

K8657 For use with Screamin’

Eagle Stage One or Heavy Breather Air Cleaner (ea)

K8659 For use with all Küryakyn Air Cleaners (ea)

B. THROTTLE BODY SUPPORT BRACKET COVER Designed to complement our Servo Motor Covers (P/N K8657 & K8659). This part removes the ugly from the stock support bracket! Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings & Trikes with Küryakyn Air Cleaners

K8658 Throttle Body Support Bracket Cover (ea)

C. BREATHER BOLT COVERS FOR TWIN CAM

Cover those unsightly zinc-plated Twin Cam breather bolts! Simply press-on & tighten the set screw. Fits: All ’99 and up Twin Cams with Küryakyn Air Cleaners & Crankcase Breather Kits & ’07 and up Sportsters with Küryakyn Air Cleaners

K7791 Breather Bolt Covers for Twin Cam (pr)

THROTTLE BODY COVER Designed to dress up one of the most noticeable areas on the Twin Cam motor, this throttle body cover mounts behind the air cleaner for a clean & simple chrome look. Available for most air cleaners including all Küryakyn air cleaner styles.

K7246 Fits with Küryakyn Hypercharger, Pro-Series Hypercharger, or Pro-R Hypercharger on ’01 and up EFI Softail Models, ’02-’07 EFI Touring Models, or ’04 and up EFI Dyna Models (ea)

K7247 Fits with All Küryakyn Air Cleaners (except Hyperchargers &

Twin Velocity/Plus), Ness Big Sucker I & II, & Screamin’ Eagle Stage 1 & Heavy Breather on ’01 and up EFI Softail Models, ’02-’07 EFI Touring Models, or ’04 and up EFI Dyna Models (ea)

Rendering Shown

192

K8389

K7782 K8124

K8123

TAPPET BLOCK COVERS

TAPPET BLOCK ACCENTS

Transform your stock cast aluminum or wrinkle black finish to glistening chrome.

So clean & so simple! Nothing could be easier than to add this cover to your exposed engine case. Its chrome style accents the stock tappet blocks & makes a huge difference.

K8124 Fits: ’91-’03 Sportsters (pr) K8123 Fits: ’84-’99 EVO Big Twins (requires minor modifications to stock airbox) (set)

Note: FLT Models require the use of P/N K1600.

K8389 Fits: All ’99 and up Twin Cam Engines (ea) U.S. Patent D588,049

K7782 Fits: ’06 and up Sportsters (ea) Patent Pending

Note: Not compatible with Küryakyn Tappet Block Covers (P/N K8230).

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

193

TRANSMISSION SHROUDS T R A N S F O R M T H E R I G H T S I D E O F Y O U R A W E S O M E T W I N C A M E N G I N E W I T H T H E S E E A S Y T O I N S TA L L , L U X U R I O U S C O V E RS . AVA I L A B L E FO R B I K ES EQ U I P P E D W I T H STO C K H E A D P I P ES O R A F TE R M A R K E T T RU E D UA L P I P ES .

K7203

K7878

K8389

K7878

K8205

A. FO R SO F TA I L B

K7878 Fits: All ’07 and up Softail Models (ea)

K7837

U.S. Patent D587,632

K8198 Fits: ’91-’99 Softail (ea) K8205 Fits: ’00-’06 Softail (Does not fit Models with hydraulic clutch) (ea)

B. FO R DY N A K8208 Fits: All ’99-’05 Dyna Models (ea) K7837 Fits: All ’06 and up Dyna Models (except '12 and up FLD) with stock exhaust support bracket (ea)

K8208

K7838 Fits: All ’06 and up Dyna Models (except '12 and up FLD) with Aftermarket Exhaust (ea)

DELUXE OIL LINE NACELLE FOR SOFTAIL

8395 7878

Blanket the area between the cam cover & transmission. This piece surrounds the oil lines & covers the exposed clutch cable where it enters the transmission end cover. Installs easily & is the perfect complement to our Transmission Shroud & Tappet Block Accent.

K8395 Fits: All ’07 and up Softail Models (ea) K8204 Fits: All ’00-’06 Softail Models (ea)

194

8204

TRANSMISSION SHROUDS

K8654

C. FO R TO U R I N G M O D E L S EQ U I P P E D W I T H S TO C K H E A D P I P ES K7876 Fits: ’07-’08 Electra Glides, Road Glides, Street Glides, & Road Kings (set)

K8654 Fits: ’09 and up Electra Glides, Road Glides,

Street Glides, Road Kings, & Trikes (ea) Note: P/N K8654 will also fit ’09 and up Touring Models with Küryakyn or V&H True Dual Head Pipes where the rear head pipe is routed in the same manner as the stock rear head pipe.

K7877

FO R TO U R I N G M O D E L S EQ U I P P E D W I T H T RU E D UA L H E A D P I P ES

K7877 Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings (set) Note: P/N K7877 will fit ’09 and up Touring Models if equipped with aftermarket True Dual Head Pipes where the rear head pipe exits over the top of the transmission to the left side of the bike. K8209 Fits: ’99-’01 Road Kings & ’00-’01 Electra Glides (ea)

(Not Shown – Appearance similar to P/N K8208 - pg 194)

K8201 Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings (ea)

K8264

OIL FILLER SPOUT COVER

OIL LINE COVER FOR SOFTAIL

Give your Softail’s engine more shine! Though similar to our previous oil line cover, this particular cover works with the Transmission Shroud (P/N K7878) & is easy to install with a single polished, stainless band clamp. Fits: All ’00 and up Softails (except Rocker/C)

K7203 Oil Line Cover (ea)

K8201

This really cleans up that dull, drab area around your oil filler neck. Chrome-plated die-cast construction with easy installation.

K8264 Fits: ’93-’06 Electra Glides,

Road Glides, Street Glides, Tour Glides & Road Kings (except Screamin’ Eagle Models with 103” engine) Note: Compatible with H-D EngineTransmission Interface covers (H-D P/N’s 66503-00, 66503-02, 66096-02).

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

195

ZOMBIE™ OIL FILLER CAP U.S. Patent D545,746

Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings & ’99-’05 Dynas

Rendering Shown

K1052

K1052 Zombie Oil

Filler Cap (ea)

EASY TURN DIPSTICK CAP Improve the looks & function of your stock oil dipstick! Utilizing the stock internals of the stock dipstick, this easy turn cap replaces the top portion to make checking oil levels quick & simple.

K1008

Fits: ’07 and up Electra Glides, Road Glides, Street Glides & Road Kings, ’09 and up Trikes, ’06 and up Dyna Models, ’08-’11 Rocker/C

K1007 Easy Turn Dipstick Cap (ea)

PEAKED DIPSTICK ACCENT Compatible with our transmission shrouds. Fits: ’07-’11 Electra Glides, Road Glides, Street Glides, Road Kings; ’09-’11 Trikes, ’06-’11 Dyna Models; & ’08-’11 Rocker/C

K1008 Peaked Dipstick Accent (ea)

K8694 K8694

K8274

REAR CYLINDER BASE COVERS One of our most popular dress-up items for Touring bikes! Clean up the black hole behind the rear cylinder. Add our Transmission Shroud & the sparkle will be captivating!

K8394

Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings with Küryakyn Transmission Shroud (P/N’s K7876 or K7877) Note: Requires Küryakyn Transmission Shroud for installation. If a ’09 and up Touring Model is equipped with aftermarket exhaust that allows installation of P/N K7877, this cover may also be installed.

K8694

Fits: ’09 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes Note: This cover can be used by itself or with our Transmission Shroud (P/N K8654) on ’09 and up Models. On ’09 and up Models equipped with an aftermarket true dual exhaust system where the rear head pipe exits over the top of the transmission to the left side of the bike, use the combination of Küryakyn Transmission Shrouds (P/N K7877) & Rear Cylinder Base Cover (P/N K8394).

196

K8274

Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings (pr) Note: Can be used with other H-D covers with minor modifications.

K8147 K8656

Fits: All ’93-’95 FLT Models (ea) Fits: All ’07 and up Softail Models (except Rocker/C or FLSTSC with stock head pipes) (set)

K8656

AF TE R

BEFORE K8638

K7847

STARTER COVER

This one simple cover turns the hodge-podge of the starter solenoid & all of its related wiring into one sculpted, glistening unit. It’s designed to work with the stock starter end cover & complement our Transmission Shroud & Cylinder Base Cover. FO R TO U R I N G - SC R E A M I N ’ E AG L E

FO R TO U R I N G - S TA N DA R D

K7847 Fits: ’07 and up Electra Glides (except ’07 and up

FLHTCUSE), ’07 and up Road Glides (except ’09 FLTRSE; ’11 FLTRUSE, '12 and up FLTRXSE), ’07 and up Street Glides (except ’10 and up FLHXSE) & ’07 and up Road Kings (except ’07-’08 FLHRSE) & ’09 and up Trikes (ea) U.S. Patent D596,537

K8638 Fits: ’07- and up FLHTCUSE, ’07-’08

FLHRSE, ’09 FLTRSE, ’10 and up FLHXSE; ’11 FLTRUSE, '12 and up FLTRXSE (ea) U.S. Patent D610,050

K8639 Fits: ’03 FLHRSE, ’04-’05 FLHTCSE, ’06 FLHTCUSE (ea)

U.S. Patent D595,191

K7846 Fits: ’99-’06 Electra Glides (except ’04-’05 FLHTCSE &

’06 FLHTCUSE), ’99-’06 Road Glides, ’06 Street Glides, & ’99-’06 Road Kings (except ’03 FLHRSE) (ea) U.S. Patent D595,191

FO R S P O RTS T E R

Patent Pending

K7747 Fits: ’10 and up Sportsters K7783 Fits: ’04-’09 Sportsters

K7783

K7747

K7847

STARTER MOUNT COVER

’09 AND UP TOURING When combined with our Starter Cover (P/N’s K7847 or K8638), our new die-cast, chrome-plated Starter Mount Cover completely dresses up the exposed starter on ’09-’11 Touring Models. FOR

K7779

K7779 Fits: ’09 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (ea)

Notes: Compatible with One-Piece Inner Primary Cover (P/N K7780). NOT compatible with Two-Piece Inner Primary Cover (P/N K8397). Will also fit ’07-’08 Models if equipped with a 2-1 or staggered dual exhaust. However, it will only work with our One-Piece Inner Primary Cover (P/N K7780); it will not work with our Two-Piece Inner Primary Cover (P/N K8397).

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

197

I N N E R P R I M A RY C O V E R S INNER PRIMARY COVERS Transform

K8294

your ride from dull to daring in minutes. Combine with our Cylinder Base Covers for the ultimate custom look.

FOR TOURING MODELS

U.S. Patent D581,322

K7780 One-Piece Inner Primary Cover (ea) Fits: ’09 and up Electra Glides, Road Glides, Street Glides, Road Kings & Trikes Note: Will also fit ’07-’08 Touring Models if stock exhaust has been removed & replaced by a 2-1 or staggered dual system. ’07-’08 Models with stock head pipes or true duals require P/N K8397.

K8398

K8397 Two-Piece Inner Primary Cover (ea)

Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings Note: Will fit ’09 and up Touring Models but One-Piece Cover (P/N K7780) looks much better.

K8294 Fits: ’90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings Patent Does Not Apply

FOR SOFTAIL

U.S. Patent D581,322

K8398 Fits: ’07 and up Softails (except Rocker/C) (ea) Note: Rear section cannot be installed in FLSTSC.

K7781

K8299 Fits: ’89-’99 Softail Models (except ’97-’99 FLSTS) (ea) K8291 Fits: ’00-’06 Softail Models (works with lowered bikes) (ea) Patent Does Not Apply

FOR DYNA

U.S. Patent D581,322

K8399 Fits: '12 FLD Switchback, ’06 and up FXDWG, ’08 and up FXDF with forward controls (ea) Note: Can also be used on any ’06 and up Dyna converted to forward controls.

K8377 Fits: All ’06 and up Dyna with Mid Controls (ea)

FOR SPORTSTER

Patent Pending

K7781 Fits: ’04 and up Sportsters (kit) K8397 K7781 P / N K 7 7 81 I N C L U D E S CYLINDER BASE COVER!

K8370

INNER PRIMARY COVER EXTENSION

This cover picks up right where our P/N K8294 Inner Primary Cover left off to cover the shift pivot area & grease fitting.

If you’re using a 2-1 or staggered performance exhaust with our P/N K8294 Inner Primary Cover, this extension covers the area where the crossover pipe had been.

K8295 Inner Primary Cover

Extension (For use with P/N K8294 Only) (ea)

198

INNER PRIMARY COVER FRONT EXTENSION

K8295

K8370 Fits: ’90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

K8392

K7780

CYLINDER BASE COVERS K8143

K8392

K8141

K8393

CYLINDER BASE COVERS Beautifully highlight the transition from cylinder to engine case. The perfect complement to Küryakyn Inner Primary Covers. (Sold separately)

K8392 Fits: ’07 and up Electra Glides, Road Glides, Street Glides, Road Kings, Trikes & ’06 and up Dyna Models

K8393 Fits: All ’07 and up Softail Models (ea) K8143 Fits: ’00-’06 Softails, ’99-’06 Electra Glides, Road Glides, Street Glides,

Road Kings, ’99-’05 FXDWG & any ’99-’05 Dyna Models converted to forward controls Important: Do not install this cover on modified engines with 4” or larger bores.

K8140 Fits: ’84-’99 H-D Evo Big Twins with forward controls or floorboards (ea) K8254 Fits: S&S Super Stock 88”, 96”, 98”, 103” Evolution Style Motor (ea) K8141 Fits: All ’91-’03 Sportsters (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

199

HORN COVERS K7204

V-SHIELD HORN COVER The V-Shield Horn Cover will fit all ’92 and up H-D Big Twins (carbureted & injected), as long as the stock horn is located between the cylinders.

K8128 Chrome V-Shield Horn Cover (ea)

K8128

K7204 Gloss Black V-Shield Horn Cover (ea)

K7718

SKULL HORN COVER The stock cowbell horn cover is a great llookk for ol’ Bessie, but not on your bike! It lacks attitude. Here’s a better idea...the Skull Horn Cover. Stick this wicked ABS cover onto your stock cowbell & turn bovine to bad in an instant! Fits: ’92 and up H-D Models with stock cowbell horn cover

K7741

K7718 Chrome Skull Horn Cover (ea) K7741 Painted Black Chrome Skull Horn Cover (ea) K7714

FLAME™ HORN COVER Despite its incendiary appearance, this hi hhot llooking k horn cover poses no additional risk of burn or heat damage to skin, pant legs or polishing cloths over the stock cowbell it mounts to. However, viewing through sunglasses may provide some protection from its raging sparkle! Fits: ’92 and up H-D Models with stock cowbell horn cover

K7714 Flame Horn Cover (ea)

K7740

FITS BIKES WITH

& WITHOUT DETACHABLES

HIDDEN HORNS FOR TOURING MODELS

Want to make sure you’re heard? Then these 115decibel horns will turn some heads! These trumpet horns won’t clutter up the side of that awesome V-Twin motor. The unique mounting position behind the saddlebag creates an enhanced blast when you sound the horn & removes the problem of bugs, water, & debris that plague other horns. This chrome-plated set includes a plug-&-play wiring harness that allows you to keep your stock horn if desired. Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

K7740 Hidden Horns for Touring Models (set)

200

KÜRYAKYN’S SUPER DELUXE WOLO® BAD BOY AIR HORN KIT

Our Super Deluxe Kit is equipped with the same amazing Air Horn as our Deluxe Kit (P/N K7742) but now a sleek chrome cover completes the package! The 118 decibel - 530/680Hz dual-tone air horn is two times louder than your factory horn. Includes convenient bracket & plug-&-play wiring for a hassle-free install. Fits: ’92 and up H-D Models with Cowbell Horn

K7743 Wolo Bad Boy Horn Kit (kit)

Give your existing Wolo Bad Boy Air Horn a little Küryakyn shine! Peel-&-stick installation for a quick streamlined look.

C OV E R O N LY -

Fits: Wolo Bad Boy Air Horn Models 419 & 519 & Küryakyn P/N K7742

K7732

K7732 Cover for Wolo Bad Boy Horn (ea)

K7742

FLAME™ HORN COVER WITH WOLO® HORNS

Obtain some peace-of-mind for a practical price! With its loud yet appealing tone you’ll feel safer on the road & combined with the blazing chrome flames – you’ll look impressive too! Rated at 115 decibels, the kit is equipped with a pair of Wolo 225-2T High-Low Tone electric horns (510/420 Hz). Includes mounting bracket, Horns, wiring harness & Küryakyn Flame Horn Cover. Bolts on in place of your stock cowbell & wiring is plug-&-play to ensure a low stress install. Fits: ’92 and up H-D Models with Stock Cowbell Horn

K7298 Flame Horn Cover (kit)

KÜRYAKYN’S DELUXE WOLO® BAD BOY AIR HORN KIT

Küryakyn has teamed up with Wolo to bring you the best & easiest to install air horn on the market. The latest in air horn technology, Wolo’s Bad Boy Air Horn produces a powerful dual-tone air horn sound that is two times louder than the factory horn. The one-piece design requires no hoses & the heavy-duty, maintenance free compressor will provide years of dependable service. Küryakyn designed a sturdy bracket & plug-&-play wiring harness so you can mount the Bad Boy in place of the stock H-D horn without any fabrication & plug it in without having to piece together your own wiring to install the relay. Fits: ’92 and up H-D Models with stock cowbell horn

K7742 Küryakyn’s Deluxe Wolo® Bad Boy Air Horn Kit (ea)

K7298

A KÜRYAKYN EXCLUSIVE!

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

201

K9050

K2025

K1315

A . STARTER CONNECTOR PLUG COVER

SENDER COVER

K1315 Fits: ’96-’06 Evo Big Twin &

K1600 Fits: ’87-’98 FLTC &

Twin Cam Starters (ea) Note: Intended for Touring & Dyna Models. This connector is covered by oil tank on Softail Models.

D . OIL PRESSURE

G . CLUTCH CABLE FERRULE ACCENT Eliminates the unfinished transition between the clutch cable & the transmission or primary cover.

FLHTC Models w/large 2-terminal sending units

K2024 Fits: Clutch Cables on

E . VELLO™ COIL COVER B . FROG MOUTH™ NEUTRAL SWITCH COVER K2025 Fits: ’98-’05 Dyna; ’98 and up

Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (ea)

K2033 Fits: ’91-’95 Dyna (ea)

F. INSTY-CHECK DIPSTICKS Check your oil in seconds!

K1013 ’87-’06 5-Speed Big Twin, Chrome (ea)

C . CHROME SOLENOID COVER K9050 Fits: ’90-’06 Big Twin Starters,

’91 and up XL1200, & ’95 and up XL883 (not for use w/ full coverage starter end covers (ea)

’87-’99 Big Twin & ’91-’06 Sportsters (ea) Note: Does not work with Küryakyn Transmission Shrouds (P/N K8198, K8208, K8209).

H . CHROME OIL SENDER SWITCH COVER K8136 Fits: All ’84-’99 Evo Big

Twins except Models equipped with large 2-terminal sending units

K1012 ’80-’86 5-Speed Big Twin, Chrome (ea)

K1010 ’80-’86 5-Speed Big Twin, Red (ea)

K1014 ’80-’86 5-Speed Big Twin, Blue (ea)

I . PETCOCK COVER Fits: ‘81-’01 stock H-D petcocks

K2011 Chrome Petcock Cover (ea) K8323 K8315

Renderings Shown

SPARK PLUG/ HEAD BOLT COVERS

SCORPION SPARK PLUG-HEAD BOLT COVERS

Take your motor to the next level with the hottest head bolt covers around. Featuring a stepped & slotted design with faceted edges to catch & reflect light for an incredible shine. Installation takes just minutes using four set screws per cover for a secure fit.

K8323 Fits: All ’99 and up Twin Cams (pr) K8369 Fits: S&S Super Stock 96” (pr)

Fits: ’99 and up Electra Glides, Road Glides, Street Glides, Road Kings & ’09 and up Trikes

K7254 Chrome - Stepped Spark Plug–Head Bolt Covers (pr) K7257 Wrinkle Black - Stepped Spark Plug–Head Bolt Covers (pr)

202

FOR TWIN CAM

FOR EVOLUTION

K8315 Fits: H-D Evo Big Twins & ’86

-’03 XL (Does not fit Screamin’ Eagle Evo Heads) (pr)

KOOL KAPS CHROME COVERS

K2446

K2440 For 3/16” Allen Bolts K2441 For 1/4” Allen Bolts K2442 K2443 K2444 K2445 K2446 K2447 K2448 K2449

K2449

K2448

Cover those unsightly & unfinished bolt heads with brilliant chrome. (10/pk)

K2447 K2441

K2442

For 7/16” Hex Bolts For 1/4” Allen Bolts For 1/4” Torx Bolts For 5/16” Allen Bolts

FINISH OFF YOUR ENGINE!

K2440 K2445

For 1/2” Hex Bolts*

K2443

K2444

For 3/4” Hex Bolts* For 5/8” Hex Bolts

K2450 NEW KIT - This set has all the

Kool Kap bolt covers to do your Twin Cam or EVO Engine, Cam Cover Transmission & Primary Cover

For 9/16” Hex Deep/30t Torx*

* Requires a small amount of silicone. Found at local hardware store or order Küryakyn P/N K400039

WORK GREAT ON OUR HIGHWAY PEGS!

K2451 For 3/4” hex head bolt used in Küryakyn Highway Pegs* (pr)

K8144 K7771

K8107

K8372/K8693

K8106

H K8144 K8781

J. HOT SPOTS™

K. HOLLOW POINT

M. ROCKER BOX BOLT COVERS

FOR ALLEN HEAD BOLTS

Give your motor the ultimate finishing touch! Works great on all motor bolts using a ¼” Socket Head Cap Screw. Available in packs of ten - two packs will cover both sides of your motor.

The final touch that makes the difference. Simple push-on installation.

CUSTOM END PLUGS

CHROME

K8114 Fits: 1/4” Allen Bolts (10 pk) K8117 Fits: 5/16” Allen Bolts (7 pk) K8120 Fits: 3/8” Allen Bolts (6 pk) BLACK

K8113 Fits: 3/8” Allen Bolts (6 pk)

SLEEVE & HOT SPOT KIT

K7771 Hollow Point Sleeve

& Hot Spot Kit (10 pk)

TURQUOISE

K8098 Fits: 5/16” Allen Bolts (7 pk) K8099 Fits: 3/8” Allen Bolts (6 pk) AQUA PEARL

K8094 Fits: 1/4” Allen Bolts (10 pk) K8095 Fits: 5/16” Allen Bolts (7 pk) K8096 Fits: 3/8” Allen Bolts (6 pk)

L. HOT SLEEVES Cover the heads of 1/4” Allen bolts found on your Evolution or Twin Cam engine. Top off with our Hot Spots & you’ll be lookin’ good.

K8781 Hot Sleeves (10 pk)

Fits: All ’99 and up Twin Cam Engines

K8372 Peaked (set/4) K8693 Peaked (set/6) K8144 Stiletto (set/4) Note: Cover extends 5/8” above top surface of the rocker box bolt. Be sure there is adequate clearance above the bolts you intend to cover.

N. HEAD BOLT COVERS Headbolt Covers hide the whole bolt head.

K8106 Low Profile (set/4)

Fits: All ’87 and up H-D Models

K8107 Stiletto (set/4)

Fits: All ’87 and up H-D Models

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

203

REAR END

TA K E A L L T H E G U E S S W O R K O U T O F C H R O M I N G Y O U R S W I N G A R M W I T H T H E S E G R E AT LO O K I N G , S I M P L E T O I N S T A L L C O V E R S . A V A I L A B L E A S A C O M P L E T E S E T T O C O V E R T H E E N T I R E S W I N G A R M & R E A R A X L E A S S E M B LY O R S I M P LY C H O O S E T H E C O M P O N E N T S Y O U N E E D T O C R E A T E A O N E O F A K I N D L O O K . I N S T A L L J U S T T H E P H A N T O M C O V E RS TO C H RO M E T H E A X L E A R E A , AVA I L A B L E I N B OT H L I G H TE D & U N L I G H TE D V E RS I O N S . T H E L I G H TE D V E R S I O N F E AT U R E S A B A N D O F R E A R FA C I N G , S U P E R B R I G H T R E D L . E . D . ’ S . I N E A C H C O V E R . T H E L . E . D . ’ S A R E S I N G L E F U N C T I O N & C A N B E W I R E D A S A U X I L I A RY R U N N I N G L I G H TS , T U R N S I G N A L S , O R B R A K E L I G H TS . ( F O R I N C R E A S E D R E A R V I S I B I L I T Y, A D D O U R R E A R R U N - T U R N - B R A K E C O N T R O L L E R [ P / N K 4 8 59 ] T O M A K E Y O U R T A I L L I G H T, E X I S T I N G T U R N S I G N A L S , & T H E L I G H T E D P H A N T O M C O V E R S M U LT I - F U N C T I O N A L ) . F O R T H O S E T H A T A L R E A D Y H A V E T H E P H A N T O M C O V E R S I N S TA L L E D , T H E T U B E C O V E R S A R E A L S O A V A I L A B L E T O F I N I S H T H E L O O K & C O M P L E T E LY C H R O M E Y O U R S W I N G A R M .

K7849

BOOMERANG COVERS FOR

’08 AND UP SOFTAIL MODELS

K7773 Fits: ’08 and up FLSTC, ’08 FXST, ’08-’09 FXSTB, ’08-’10 FXSTC, ’10 and up FLSTSE Patent Pending

Note: Will fit ’08 and up FLSTF, FLSTFB, FLSTN, FLSTSB if the stock exhaust has been removed & replaced by a staggered dual or 2-1 system.

K7773 FOR

K7851

’00-’07 SOFTAIL MODELS

K7851 Fits: All ’00-’07 FXST (except Deuce) & all

’00-’07 FLST (except Fat Boy & Deluxe) (pr)

K8235 Fits: ’00-’07 Deuce with exhaust system not

using O.E. rear support bracket (pr) Note: If you have a ’00-’07 Fat Boy or ’05-’07 Deluxe & have removedthe O.E. rear exhaust support bracket, you should use P/N K7851. FOR

’86-’99 SOFTAIL MODELS

K8188 Fits: All FXST Models & all FLST Models without Shotgun Exhaust (pr)

204

K7258

SWINGARM PIVOT COVERS K7849 Fits: All ’00-’07 Softail

Models (except ’05-’07 FLSTN, ’07 FLSTF, & ’07 FXSTD) (pr)

K7258 Fits: All ’08 and up Softail Models (pr)

Note: Will not fit ’08-’11 Rocker models.

SWINGARM COVER SETS FO R ’ 08 A N D U P SO F TA I L

FO R ’ 86 - ’ 07 SO F TA I L

COMPLETE WITH UNLIGHTED PHANTOM COVERS

K8256 Fits: ’00-’07 Softails* (except ’00-’07 Deuce,

K7815 Fits: All ’08 and up Softails

’07 FLSTF, ’06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)

(except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C, FXS) (set)

Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.

K8284 Fits: ’00-’07 Deuce* (set) K8288 Fits: ’86-’99 Softail Models** (set) *P/N K8256 will fit ’00-’06 FLSTF or ’05-’07 Deluxe & P/N K8284 will fit ’00-’07 Deuce ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.

COMPLETE WITH LIGHTED PHANTOM COVERS

** Does not fit ’86 & ’87 Softails with rear-facing axle adjusters.

K7814 Fits: All ’08 and up Softails

COMPLETE WITH LIGHTED PHANTOM COVERS

K8102 Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ’07 FLSTF,

(except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C, FXS) (set)

’06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)

Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if stock exhaust has been removed & replaced with a staggered dual or 2-1 system. TUBE COVERS ONLY

K8698 Fits: ’06-’07 FXST, FXSTB, FXSTC, FXSTS, ’07 FLSTF (set) K8221 Fits: ’00-’07 Deuce* (set) K8222 Fits: ’86-’99 Softail Models** (set) *P/N K8102 will fit ’00-’06 FLSTF or ’05-’07 Deluxe, P/N K8221 will fit ’00-’07 Deuce & P/N K8698 will fit ’07 FLSTF ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.

K7818 Fits: All ’08 and up Softails (except FXCW/C) (set)

** Does not fit ’86 & ’87 Softails with rear-facing axle adjusters. TUBE COVERS ONLY

K8108 Fits: ’00-’07 Softails (except ’00-’07 Deuce) (set) K8228 Fits: ’86-’99 Softails (set) K8108 K7818 K8102

K8202

K7816

K8220

PHANTOM COVERS FO R ’ 08 A N D U P SO F TA I L

Fits: All ’08 and up Softails (except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C)

K7816 Lighted Phantom Covers (pr) K7817 Unlighted Phantom Covers (pr) Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.

FO R ’ 86 - ’ 07 SO F TA I L

Fits: All ’86-’07 Softails Models (except ’00-’07 FLSTF, FXSTD, ’05-’07 FLSTN, ’06-’07 FXST, FXSTB, FXSTC, FXSTS)

K8200 Phantom Covers, Chrome (pr) K8202 Phantom Covers, Gloss Black (pr) K8220 Lighted Phantom Covers (pr) Note: Lighted Phantom Covers are not D.O.T. approved nor are they intended to replace stock turn signals or taillights. Note: Will fit ’00-’06 FLSTF, ’00-’07 FXSTD, or ’05-’07 FLSTN if stock exhaust has been removed & replaced by a staggered dual or 2-1 system. Note: Does not fit ’86 & ’87 Softails with rear-facing axle adjusters.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

205

MID-FRAME COVERS FOR TOURING MODELS

K7842

Create a smoother, creamier look by concealing unsightly frame welds with this luscious, chrome-plated steel cover. Installs easily in just a matter of minutes.

K8239 Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings (pr)

U.S. Patent D518,760

K7842 Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (pr)

K8609 Fits: ’09 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (set)

K8609

K8239

BEHIND THE ENGINE FRAME COVER

Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings

10 -5 /

K7857

8”

This large show chromed cover fills that nasty black hole behind your rear cylinder & starter while perfectly hiding the gap between the y-frame member. No drilling or modifications necessaryy for Cruise Control Equipped Models. If you have ct L.E.D.’s lighting your engine, this helps reflect light & makes that area sparkle!

K8239

K7857 Behind the Engine Frame Cover (ea)

12 -1/4

”

LOWER FRAME COVER FOR SOFTAIL K8677

Easy & neat, this cover installs right below our Boomerang Frame Cover on the left side of your bike. Fits: ’97-’07 Softail Models without cross-over exhaust

K8253 Lower Frame Cover for Softail (ea) K1542

LOWER BELT GUARD ACCENT Without the hassle of removing the stock guard, fully chrome your drive line for a lasting impression!

K8677 Fits: All ’00 and up Softail

Models (except Rocker/C) (ea)

206

K8253

SHOTGUN BELT GUARD Chrome-plated aluminum extrusions & castings with beechwood grips. Fits: ’00-’11 FLSTC, ’06 FLST, ’00-’06 FLSTF, ’05-’11 FLSTN, ’00-’03 FLSTS, ’05-’07 FLSTSC, ’00-’05 FXST/B/S

K1542 Side-by-Side Shotgun Belt Guard (ea)

RIGHT REAR LOWER FRAME COVER FOR TOURING MODELS

U.S. Patent D594,791

By adding this classy stamped Lower Frame Cover, you’ll create a pleasing transition out of what was visual chaos. This beautifully chromed embossed cover creates a perfect bridge between the stock painted side cover & the passenger floorboard area, eliminating exposed frame tubes & the rear rubber isolation mount. A great addition to Mid Frame Covers!

K7829

Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings

K7829 Right Rear Lower Frame Cover (ea) K7776

K7777

PASSENGER BOARD MOUNT ACCENTS Dress up those stock black floorboard mounts with our simple ABS chrome Passenger Board Mount Accents. No tools needed & no drilling. Simply clean the surface, peel, stick & admire!

K7776 Fits: ’93-’09 Touring Models with stock Passenger Floorboard Mounts (except ’04-’05 FLHTCSE & ’06-’09 FLHTCUSE) (pr)

K7777 Fits: ’10 and up Touring Models with stock Passenger Floorboard Mounts (except ’10 and up FLHTCUSE & ’11 FLTRUSE) (pr)

K7867

INNER FENDER ACCENT FOR SOFTAIL

K7858

Affordable, easy, & wow what a difference! This creamy chrome-plated stamped steel insert covers up your plain black plastic inner fender/splash guard. Just stick it on with doublesided tape & go!

K7858 Fits: All ’00-’06 Softail Models (except

’04 FXSTDSE or ’06 FXST, FXSTB, FXSTS, FLSTFSE) (pr)

K7848 Fits: ’07 Deuce, Deluxe, Heritage & Springer Classic (ea)

Note: This is one-piece for the right side of the bike.

K7867 Fits: All ’08 and up Softail Models (except ’08-’11 Rocker/C) (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

207

K8646

K1595

K8645

SADDLEBAG LID ACCENTS It’s all about lines; if you’ve got ’em, flaunt ’em! Besides their h i greatt looks, you’ll also be protected from minor nicks & scratches to these areas. Peel-&-stick installation. Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with Hard Saddlebags

K7764 Slotted Saddlebag Lid Accents (pr) K8646 Saddlebag Lid Accents (pr)

LID ACCENTS FOR SADDLEBAGS & TOUR-PAK

These streamlined chrome accents work with the contours of the hard saddlebags & side covers to create a flowing, swept body line. Intended for use without saddlebag rails, they’ll add a classic, personal touch to your H-D Touring bike. Fits: Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with Hard Saddlebags

K8645 Fits: ’93-’08 Models – Includes Saddlebag & Side Cover Accents (6 pieces)

These chrome accents really highlight the tasteful look of the H-D King, Chopped or Ultra Tour-Pak & saddlebag lids. Choose to use just one set, or combine two sets for a truly pulled together look that screams streamlined! Besides the visual appeal, they also provide protection to the lids’ top edges that are very susceptible to nicks & other damage. Fits: Tour-Pak Lids on ’80 and up Touring Models equipped with King or Chopped Tour-Paks & Saddlebag Lids on ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, or Road Kings with Hard Saddlebags

K7752 Fits: ’09 and up Models – Includes

Saddlebag Accents Only (4 pieces)

SADDLEBAG LATCH COVERS Saddlebag latches are conspicuous on touring rigs & are a great place for a distinctive touch of style. Stock lock mechanisms are re-used so you won’t end up with another set of keys! Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with Hard Saddlebags

K1595 Flamed (pr) K1599 Grooved (pr)

K8647 Lid Accents (pr) Note: Will fit HD Razorpak lid.

K7764

SIDE COVER & SADDLEBAG ACCENTS

K8647 K1599 K1595

208

REAR END K3792

REAR SPEAKER ACCENTS Think of how wild visual effects add to a great music video or concert. Now add the same excitement to your Ultra’s sound stage! These bright chrome trim rings install easily on top of the stock black rear speaker rings & come complete with polished stainless hardware. Fits: '98 and up FLHTCU, '10 and up FLHTK, ’11 and up FLTRU, '08-'11 FLHTCUSE, & '09 and up FLHTCUTG

K3792 Rear Speaker

K3792

Accents (pr)

Note: Will also fit ’98 and up FLHTC if equipped with Accessory Rear Speaker Kit. Shown with Zombie Medallion sold separately.

K7138 K7138

K8648

HINGE COVERS FOR H - D TOUR- PAK®

U.S. Patent D627,690

When perfection hinges on detail, these little cover-ups really shine! Our beautifully chromed aluminum hinge covers install quickly & securely over the tired looking OEM stainless pieces. You’ll be amazed at the life these give to any paint job. Fits: ’89 and up Electra Glides, Tour Glides, Tri Glides, or any Touring Model equipped with a King, Ultra, or Chopped Tour-Pak

K8648 Hinge Covers (set)

LUGGAGE RACK RELOCATION KIT Simple yet very effective. Relocate your stock or Küryakyn luggage rack with these great looking risers. Your luggage rack will be raised ½” & can be positioned ½” forward or ½” backward from its current location. Allows for the use of Küryakyn L.E.D. Run-Turn-Brake Spoiler (P/N K7767) on ’10 and up Electra Glide Ultra Limited Models when mounted in the forward position. Fits: Any luggage rack with 1/2” diameter legs using 1/4”-20 mounting screws - This includes Küryakyn Luggage Rack (P/N K7139) & stock rack on ’10 and up Ultra Limited

K7138 Luggage Rack Relocation Kit (set)

SWINGARM ACCENTS

K8696

FOR TOURING

Because of its location, the plain black swingarm on a Touring rig can easily fade into the background, but it can take center stage when adorned with these sleek chrome accents. Besides their flash & brilliance, the louvered appearance & sweeping lines add new life & flair that’s sure to impress! Installation requires no tools & just a few minutes of your time.

K8696

Fits: ’09 and up Electra Glides, Road Glides, Street Glides & Road Kings

K8696 Swingarm Accents (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

209

L.E.D. REAR BUMPER INSERT Fusing auxiliary Run & Brake L.E.D. lighting with elite styling, our new Rear Bumper Insert is the true model of form & function. The chrome filler panel is easy to install with plug-&-play wiring. Fits: ’09 and up FLHTC, FLHTCU, FLHR; ’10 and up FLHTK, & ’09 FLHT

K7751 L.E.D. Rear Bumper Insert (ea)

K8621

REAR FENDER TIP LENS GRILL FOR ’09 AND UP TOURING Stock Fender Tip Lights are barely noticeable but this hot new Fender Tip Lens Grill sets them ablaze. When illuminated, small holes in the cross member & slots across the top emit a jewel-like light effect; a small detail with a big impact! Installation takes only minutes & requires no tools. Fits: ’09 and up Electra Glides with Rear Fender Tip Lights

K8621 Rear Fender Tip Lens Grill (ea)

REAR FENDER ACCENTS FOR FLHX & FLTRX It’s the unique & subtle touches that get noticed. That’s why we’re offering these Rear Fender Accents! A simple way to get show quality chrome with class. Made from a flexible yet durable ABS, they offer a great way to make your bike as individual as you are. Fits: ’06 and up Street Glides & ’10 and up Road Glide Customs

K7797 Rear Fender Accents (kit)

MUFFLER BRACKET COVERS Designed to encapsulate & smooth the appearance of the welded on muffler mounting brackets beneath the saddlebags for a streamlined look. Made from chrome plated stamped steel & will fit most 4” round mufflers.

K7255 Fits: 4” Round Mufflers on ’95 and up

Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (pr)

210

COVER THOSE UNSIGHTLY GAPS IN MINUTES!

K7207

LOWER COVERS ONLY Fill the void between your fender & saddlebags! Attach to the fender with pressure sensitive adhesive.

Rendering Shown

K1192 Chrome - Fits: ’95-’08

Electra Glides, Road Kings, Road Glides with or without H-D Detachable Docking Hardware Kits (53803-06 & 53804-06) –Not compatible with saddlebag rails (pr)

UPPER SADDLEBAG FILLER PANELS Küryakyn’s sleek Upper Saddlebag Filler Panels instantly smooth & cover the upper shock mounts, air line, & unsightly gap between the fender & saddlebag lids. Held securely by 3M VHB adhesive tape, installation takes only a few minutes. Select chrome or black from applications for stock bikes or bikes equipped with H-D 2-Point or Küryakyn P/N K1635 backrest attachment kit. Fits: ’09 and up Street Glide & ’10 and up Road Glide Custom

K1192

K7207 Without Detachable Brackets Chrome (pr)

K7208 Without Detachable Brackets Gloss Black (pr)

K7221 With 2-Point Detachable Brackets - Chrome (pr)

K7222 With 2-Point Detachable

Brackets - Gloss Black (pr)

SADDLEBAG MOUNT BRACKET ACCENTS

REAR FENDER & SADDLEBAG ACCENTS K1596

Bolt them on & dress it up! Cover up that lower saddlebag support where it meets the lower fender bracket - simple & easy. Fits: ’96-’08 Electra Glides, Road Glides, Tour Glides, & Road Kings

K8641 K8640

K1596 Zombie (pr) K1597 Maltese Cross (pr) K1598 Grooved (pr)

Our classy fender tips are the perfect chrome complement to clean fenders.

K8640 Rear Fender Accent

Fits: ’04-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE (ea)

K8641 Rear Saddlebag Accents

Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags (pr)

Note: Not compatible with H-D’s Nostalgic Saddlebag Guard Rails.

K8640

EXHAUST TIPS FOR STOCK TOURING MUFFLERS These clamp-on exhaust tips transform your ho-hum stock mufflers in just minutes! While sound levels & performance are unaffected, visual appeal is through the roof!

K7607

Fits: ’95 and up Electra Glides, Tour Glides, & Road Kings, ’98 and up Road Glides (except ’10 FLTRX), & ’06 and up Street Glides (except ’10 FLHX)

K7609

K7607 Six Gun Exhaust Tips (pr) K7609 Fishtail Exhaust Tips (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

211

ALL NEW SPEC IFIC P A RT S M A D E E X C L U S I V E LY F O R H A RLEY - D AVI DS O N TRIKES! ALL HIGH Q UA LITY STY LIS H & I N N O V AT I V E P R O D U C TS TO M A K E YO U R T R I K E AN AWE-INSPIRING S H O W STO P P E R .

Renderings Shown

A. TOP FENDER ACCENTS FOR TRIKES

Enhance the look & add some character to the top side of your trikes rear fenders with these unique & noticeable accents. Made from lightweight, durable ABS & chrome plated for an unmistakable look.

Renderings Shown

Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trike

K7216 Top Fender Accents (pr)

B. REAR FENDER ACCENTS (LEADING EDGE) FOR TRIKES Add some chrome & protect the edge of your Trike’s fenders with these stylized accents. Mounting to the front leading edge of the rear fenders, these chrome plated ABS accents are just what you need to dress up a very noticeable area.

Fits: ’09 and up FLHTCUTG Tri Glide UItra Classic & ’10-’11 FLHXXX Street Glide Trikes

K7217 Rear Fender Accents - Leading Edge (pr)

212

FOR TRIKES! C

C. REAR LIGHT BARS

FOR TRIKES

Küryakyn’s Rear Light Bars blend sculpted chrome housings with auxiliary run, turn, & brake lighting. Easy to install with pre-applied 3M VHB adhesive tape & plug-&-play wiring. Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trike

K7268 Rear Light Bars (pr) Renderings Shown

E. MUD FLAPS

D. TRUNK

FOR TRIKES

LATCH ACCENT FOR TRIKES Designed with the rider in mind, this new accent adds a burst of style & a bit of paint protection to an otherwise plain area surrounding the trunk latch/ lock push-button. Made from lightweight yet durable chrome plated ABS & install in just minutes. Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trike

K7215 Trunk Latch Accent (ea)

Reduce road spray from the rear tires & add some style to your trike with these great looking mud flaps. Made from durable, yet flexible rubber contrasting with chrome trim to match the lines of the rear fenders. Secure, bolt on design installs quick to get you on the road in no time. Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trikes

K7220 Mud Flaps (pr)

F. REAR FENDER FLARES F

FOR TRIKES

Much more than just chrome edging, these two-piece fender flares add threedimensional depth to an otherwise bland wheel opening on stock H-D Trikes. With unique lines & a brilliant chrome finish, these rear fender flares are sure to turn heads. Installation is quick & easy using 3M VHB. Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic & ‘10-’11 FLHXXX Street Glide Trike

K7214 Rear Fender Flares (pr) Renderings Shown

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

213

CURVED LAYDOWN LICENSE PLATE MOUNT FOR ROAD KING

ZOMBIE™ & WIDOW® TAILLIGHT COVERS As your taillight fades into the darkness, the sinister impression of the Zombie or Widow is all that will remain. A great addition to our popular themed collections. Fits: ’73 and up H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’12 FLSTN, ’00-’07 FXSTD, ’02 and up V-Rod, ’07 and up XL1200N, ’09 and up XL88N, '11 and up XL1200C ’08-’11 Rocker, ’09 and up FXDB, ’10-’12 FXDWG, ’10 and up FLHX, ’10 and up FLTRX, ’09 FLTRSE, ’10 and up FLSTSE, ’10 and up FLHXSE, '12 and up FLTRXSE, & '12 and up FLD)

K9009 Chrome Zombie (ea) K9024 Gloss Black Zombie

U.S. Patent D632,815 U.S. Patent D632,815

K9020 Widow (ea) K8130

K9008

As long as you have to display a license plate on your bike, why not make it look like it belongs there? Curved to your fender’s contour & laid down for a sleek low profile, this chromed, ball milled mount will blend in, not stick out. Designed to fit 4”x7” plates. Fits: ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides & ’97-’08 FLHT Standard

K3165 Curved Laydown License Plate Mount (ea)

CURVED LAYDOWN LICENSE PLATE MOUNT FOR SOFTAIL WITH TOMBSTONE TAILLIGHT

Flat is not where it’s at! Softail styling is rich with sensuous curves & contours but the stock license plate mount is stark & industrial looking. Our Curved Laydown License Plate Mount has pleasing lines & a slightly swept mounting position that blends in instead of sticking out. Silky smooth chrome finish & detail grooves add a classy finishing touch. Fully compatible with stock Softail Deluxe luggage racks. Fits: ’05 and up Softail Deluxe, ’05-’07 Softail Springer Classic, ’98-’03 Heritage Springer

K3181 Curved Laydown License Plate Mount (ea)

TAILLIGHT COVERS Sturdy & attractive. These superbly stylized covers do wonders for your dull taillight. 3-year limited warranty included, as these will never rust. Fits: ’73 and up H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05 and up FLSTN, ’00-’07 FXSTD, ’02 and up V-Rod, ’07 and up XL1200N, ’09 and up XL88N, '11 and up XL1200C ’08-’11 Rocker, ’09 and up FXDB, ’10 and up FXDWG, ’10 and up FLHX, ’10 and up FLTRX, ’09 FLTRSE, ’10 and up FLSTSE, ’10 and up FLHXSE, '12 and up FLTRXSE, & '12 and up FLD)

K8130 Taillight Cover (ea) K9008 Taillight Visor without Slots (ea) Note: P/N K9008 is intended for motorcycles with the license plate below the taillight to cover the clear window on top of the lens.

214

L I C E N S E P L AT E S K9171

K3148

CURVED LAYDOWN LICENSE PLATE MOUNT WITH FRAME

This super cool, curved laydown license plate bracket is a major improvement over the stock billboard plate mount on many H-D’s. The curved frame meets the backing plate cleanly for a finished & completely custom look. Accents 4”x 7” plates. Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

K9171 Chrome Curved Laydown License Plate Mount with Frame (ea) K3148 Gloss Black Curved Laydown License Plate Mount with Frame (ea)

LIGHTED CURVED LAYDOWN LICENSE PLATE MOUNT Küryakyn’s Lighted Curved Laydown License Plate Mount is a great alternative to your drab, stock license plate frame & mount. The ball-milled frame design is killer & the license plate illumination meets DOT standards. Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

K3138 Lighted Curved Laydown Plate Mount (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

215

CURVED LICENSE PLATE FRAME

K3157

The Street Glide is way cool, but this bolt on, gracefully curved license plate frame makes a big difference. Rid yourself of the stock black bracket & the flat look. No drilling – no need for a new license plate light. Just bolt it on & go! C H RO M E

K3163 Fits: ’06-’09 FLHX Street Glides, ’09 FLTR Road Glides, ’09 FLHT Electra Glide Standards, ’09 and up FLHR Road King, ’07-’08 FLHRSE, ’05 FLHTCSE, & '12 and up FLD Dyna Switchback (ea)

K3157 Fits: ’10 an up FLHX Street Glides & FLTRX Road Glide Customs (ea)

Patent Pending

G LOSS BL AC K

K3149 Fits: ’06-’09 FLHX Street Glides, ’09 FLTR K3149

K3163

Road Glides, ’09 FLHT Electra Glide Standards, ’09 and up FLHR Road King, ’07-’08 FLHRSE, ’05 FLHTCSE, & '12 and up FLD Dyna Switchback (ea)

K3147 Fits: ’10 and up FLHX Street Glides & FLTRX Road Glide Customs (ea)

LICENSE P L AT E F R A M E L.E.D. LIGHTED CURVED LICENSE PLATE FRAME Here’s a great universal Curved License Plate Frame for custom or stock fenders. It includes a chrome backing plate & outer frame with built-in L.E.D.’s to illuminate the license plate. It’s a great way to relocate a license plate below the taillight! Fits: Universal applications with 4” x 7” license plates – Installation requires drilling mounting holes

K9255 L.E.D. Lighted Curved License Plate Frame (ea)

216

K3144 + K3146

CURVED FENDER TIP LICENSE PLATE MOUNT You asked for it – we designed it! This very classy curved license plate mount hugs the contour of the fender & replaces the existing fender tip. Incorporates a stylized tip, red L.E.D. lights & a light to illuminate the plate itself while cleaning up the clutter on the rear fender. A simplified wiring solution readily plugs in on ’96-’08 Touring Models & ’96 and up Softails. Hardwiring is required on earlier Models. Fits: Replaces Stock Fender Tip Light on ’80-’08 Electra Glides, Tour Glides & Road Kings, ’98-’03 Road Glides, & ’86 and up FLST Models

K3151 Curved Fender Tip License Plate Mount (ea)

CURVED LICENSE PLATE FOR CVO ROAD GLIDES

& STREET GLIDES

We’ve come up with two bolt-on, plug-&-play solutions to rid your CVO fender of the black plastic stock license plate mount! Purchase our Chrome Mounting Backplate (P/N K3146) & then add your choice of the clean-&simple Curved L.E.D. Lighted Frame (P/N K3144) or the classy Curved L.E.D. Lighted Tri-Light Frame (P/N K3145). Fits: ’09 FLTRSE CVO Road Glides, ’10 and up FLHXSE CVO Street Glides & '12 FLTRXSE CVO Road Glide Customs

K3144 Curved Lighted L.E.D. License Plate Frame (ea)

Note: Requires P/N K4146 Backplate, sold separately.

K3145 Curved Tri-Light L.E.D. License Plate Frame (ea)

Note: Requires P/N K4146 Backplate, sold separately.

K3146 Mounting Backplate for CVO FLTRSE/FLHXSE (ea)

K3144

K3145

K3146 K3145 + K3146

TRI-LIGHT CAN BE MOUNTED ON TOP OR BOTTOM!

L.E.D. LIGHTED LICENSE PLATE FRAME WITH TRI-LIGHT Patent Pending

Now you can add additional lighting & hide that ugly stock license plate mount at the same time. This great looking curved frame features a white L.E.D. license plate light & three red strip lights with running & brake functions all wrapped in a brilliant chrome finish. Designed to mount to the existing factory license plate bracket, installation is simplified, & with 8 degrees of tip back the rear of the bike will be transformed. Fits: Universally bolts directly to flat stock OEM license plate mount for 4”x 7” License Plate

K3152 L.E.D. License Plate Frame with Tri-Light (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

217

K3166

CURVED LICENSE PLATE FRAME WITH RUN-TURN-BRAKE This “frame-up” leaves no chance for mistaken identity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D.’s provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4” x 7” plates. Fits: Any H-D Model with the standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

K3166 Lighted Curved Laydown License Plate with Accent Taillights (ea)

K9167

K9166

K9164

K113

K9165

LICENSE FRAME & BACK PLATE SET Uses the stock bracket. Fits: 4” x 7” Plates

K9166 License Frame &

FOR ROAD KINGS, ROAD GLIDES, ELECTRA GLIDE STANDARDS

K113 Fits: ’97-’08 Road

Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides & ’97-’08 FLHT Standard (ea)

218

SWEPT EAGLE

Replaces Harley’s standard 3-bolt bracket & tilts the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down.

This contemporary eagle license plate frame can be the final touch you need.

K9165 Laydown License

Plate Holder (ea)

LICENSE PLATE FRAME

K3161 Fits: Universal 4”x 7” Plates &

Stock Mounting Bracket on ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides, or ’97-’08 FLHT Standards (ea)

LONE EAGLE

LICENSE PLATE FRAME

Show your American pride!

Complements the lines of your fender rather than standing up like a billboard. Mounts in the same location as stock.

K3161

LAYDOWN LICENSE HOLDER

Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

Back Plate Set

LAYDOWN LICENSE PLATE HOLDER

K3160

LIGHTED LICENSE PLATE FRAME This chrome die-cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake & tail lamp circuits or together for an extra bright stop or running light. Fits: 4” x 7” Plates

K9167 Lighted License Plate

Frame (ea) Note: Not intended to replace O.E. brake or taillight.

K3160

Fits: Universal 4”x 7” Plates & Stock Mounting Bracket on ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides, or ’97-’08 FLHT Standards (ea)

BALL-MILLED LICENSE PLATE FRAMES Offered in two sizes to fit 4-3/8” x 8” & 4” x 7” plates. Some minor modifications may still be necessary.

K9164 Large License Plate Frame (ea) K9163 Small License Plate Frame (ea)

K9251 + K3184 K9253 + K3184

HOW TO ORDER:

1 . SELECT LICENSE HOLDER ST YLE 2 . SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLA MP

K3125

CURVED SIDE MOUNT LICENSE HOLDERS

K9252 + K3185

In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then get the correct Mounting Clamps. Sized to fit 4” x 7” plates only.

L I C E N S E H O L D E RS

K9253 Chrome Curved Horizontal Side Mount (ea) K9251 Chrome Lighted Curved Vertical Side Mount (ea) K9252 Chrome Lighted Curved Vertical Side Mount with Taillight g (ea)

LIT/ UNLIT

K3125 Gloss Black Curved Horizontal Side Mount (ea))

TA I L L I G H T C A N B E I N S TA L L E D ON TOP OR BOTTOM!

Note: Mount Clamps required for installation - Sold separately (below). M O U N T C L A M PS

Required for installation of Küryakyn Side Mount License Holders. CHROME

K3183 Fits: ’86 and up Softail (except Rocker & ’09 FXSTSSE) without Küryakyn Swingarm Covers (ea)

K3184 Fits: ’86 and up Softail (except Rocker & ’09 FXSTSSE) with Küryakyn Swingarm Covers (ea)

K3188 K3185 K3187 K3186 K3175

Fits: ’91-’05 Dyna Models (ea) Fits: ’06 and up Dyna Models (ea) Fits: ’86 and up Sportster Models (ea) Fits: s: Universal Universa for 1-1/4” diameter tubing (ea)

GLOSS BLACK

K9252 + K3185

K3188

Fits: ’08 an up Rocker & ’09 FXSTSSE (ea)

K3116 Fits: ’86 and up Softail (except Rocker & ’09 FXSTSSE) without Küryakyn Swingarm Covers (ea)

K3187

K3116

K3117 K3118 K3119 K3121

Fits: ’08-’11 Rocker & ’09 FXSTSSE (ea) Fits: ’06 and up Dyna Models (ea) Fits: ’86 and up Sportster Models (ea) Fits: Universal for 1-1/4” diameter tubing (ea)

Note: Please check local laws regarding side mount license plates before ordering.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

219

L.E.D. LICENSE PLATE BOLT LIGHTS Light up your license plate whether it’s in the stock location or custom mounted with these white L.E.D. bolt lights. You won’t find a cleaner license plate lighting option with a simpler installation.

K9199 L.E.D. License Plate Bolt Lights (pr) Note: 1/4”-20 Mounting Stud. Chrome Frame sold separately (P/N K9163).

A K3159

A K3158

A. LICENSE PLATE MOUNTING HOLE COVERS With so many riders using our Side Mount License Plate Mounts or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. Both covers install in minutes & completely cover the footprint left by the stock mount. Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (both styles also cover the fourth hole found on some Dyna & Sportster Models)

K3158 License Plate Mounting Hole Cover with Emblems (ea) K3159 Tribal License Plate Mounting Hole Cover (ea) E

B. INSPECTION PLATES

This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don’t have to mess up a nice paint job or chrome surface with some cheesy government sticker. Universal fitment.

K9399

Plate K9168 Inspection 3-1/2” x 3-1/2” (ea) Inspection Plate K9162 Texas 2-7/8” x 4” (ea)

C. LICENSE PLATE MARKER

LIGHT/TURN SIGNAL MOUNT

K1625

C Lights Not Included

F K1624

F D

K1623

220

Mount auxiliary marker lights or turn signals to your license plate. This simple system mounts directly to the back of your license plate with support backing plate & two side mount brackets. The side mount brackets have a 3/8” hole & will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets (See pg 94). Note: Great option for allowing the mounting of saddlebags on bikes that need to relocate turn signals. Will not work with Küryakyn Curved License Plate Frames.

Plate Marker K4247 License Light Mount (ea)

E. L.E.D. LICENSE PLATE ILLUMINATORS

WITH TURN SIGNAL ACCENTS

Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4”- 20 mounting stud makes it simple to bolt them on, wire them in, & ride on! L.E.D. License Plate

K9399 Bolt Lights with Red Accent Light (pr)

F. LICENSE PLATE HARDWARE KITS Chrome hardware & rubber isolators dampen vibration between your plate & frame. Available in three styles to accommodate a variety of plate brackets & frames. Fits: Most license plate brackets & frames

K1623 Button Head (kit) K1624 Acorn (kit) K1625 Countersunk (kit)

D. TURN SIGNAL RELOCATOR KIT Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area. Side mount brackets have several mounting points for lights & will accept most OEM rear turn signals. WORKS WELL WITH: K3155 Turn Signal Relocator Kit (kit) • 5/16” OR 3/8” SMALL & LARGE SILVER BULLETS • P/N K5032 TURN SIGNAL Note: Will not work with Küryakyn Curved • KÜRYAKYN MINI BULLETS License Plate Frames.

WINDSHIELD BAGS K4178

KEEP ALL YOUR ESSENTIALS IN REACH!

LUGGAGE WINDSHIELD POUCH

FAIRING POUCH

FEATURES

• 3 separate compartments • 1200 Denier & thermoformed construction for durability & shape retention whether packed full or empty • Large enough to hold all your essentials Fits: Detachable Windshields including Küryakyn Quick Release Windshields & Memphis Shades Windshields

• 2 Large pockets - Accommodates larger items

• Large main compartment is waterproof

• Inner mesh pockets • 1200 Denier thermoformed construction for durability & shape retention

• Unique Reversible Quick Detach Pouch that Mounts to the Outside of the Middle Compartment as a Map Pouch or Multi-use Pocket & Can Be Stored Inside Main Compartment When Not In Use

• Quick easy installation • Glove friendly zipper pulls Fits: ’96-’12 Electra Glides, Street Glides & Trikes Dim: 24" Long x 5" Deep x 5-1/2” High

Dim: 20-1/2" Long x 6-3/4" High x 6" Deep

Cubic Inches: 220

Cubic Inches: 290 Main Compartment 370 overall with Both Pockets

K4137 Windshield Pouch (ea) Note: Check for clearance with cables to ensure bag doesn’t interfere with steering. All mounting hardware included. Mounting brackets have 3 different points for height adjustability.

K4137

K4138 Fairing Pouch (ea) Note: Does not work on AirMaster Fairing or Sportech Detachable Fairing. Does not work with Küryakyn Inner Fairing Accent K3766, or H-D Fairing Dash Pad P/N 58262-05

K4138

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

221

TRADITIONAL 3-POUCH FAIRING BAG FEATURES

• Quick easy installation

• Quick Magnetic Snap Closures

• 3 easily accessible individual storage pockets

• PVC leather, semi-rigid construction

• More space than the average fairing bag for all your small items

• Pockets secure shut with magnetic closures

Dims: 20” Wide x 2.75” High x 3” Deep Fits: ‘96 and up Electra Glides, Street Glides & Trikes, Küryakyn AirMaster Fairing, & Sportech Detachable Fairing-Plus All mounting hardware included.

K4178 Traditional Style 3-Pouch

Fairing Bag (ea) Note: Works well with Küryakyn Inner Fairing Accent (P/N K3766 - shown below) or H-D Fairing Dash Pad (P/N K58262-05).

WORKS WITH OR WITHOUT OUR INNER FAIRING ACCENT!

SINGLE POCKET WINDSHIELD BAG FOR SMARTPHONE

This is the perfect solution to mount your smartphone within view & add useful storage for all your essentials within reach. Thanks to the clear viewing window, all touch screen functions remain while your device remains snug & secure. Keeping your device connected & charged is accomplished through specially designed ports at the top & bottom, & installation takes just minutes with a few simple hand tools. Fits: ‘96 and up Electra Glides, Street Glides & Trikes

K4129 Single Pocket

Windshield Bag (ea)

Note: Does not work on AirMaster Fairing or Sportech Detachable Fairing. Does not work with Küryakyn Inner Fairing Accent (P/N K3766) or H-D Fairing Dash Pad (P/N K58262-05).

222

T R AV E L B A G S DELUXE CONVERTIBLE™ LUGGAGE RACK BAG WITH PROTECTIVE COVER

Bring everything you need with you! Elastic mesh pockets & multiple pouches make your items readily accessible. 1200 Denier nylon construction, heavy-duty zippers, & zip-out rain cover. Bag also features mounting straps utilizing both hook-&- loop fasteners & elastic shock cords. Fits: Attaches to Küryakyn Luggage Rack, H-D & other standard racks on the market. Dim: Main bag 21.5" Long x 9.5" Wide x 8" High. Two Pockets 4.5" Wide x 9" High x 3" Deep Cubic Inches: 1,634

K4162 Deluxe Convertible

Luggage Rack Bag, Black

PAKMASTER

• Zippered mesh pocket on the inside of the door for items you want to access easily

FEATURES

• Main Compartment Can be Divided Into 3 Compartments with Fold Down Dividers

• Stylish, thermo-formed & molded design • Mounts to the Tour-Pak with or without a luggage rack • Zippered door opens 3/4 of the way to allow access to bag

• Carrying handle & detachable shoulder strap • Reflective piping • Waterproof material & zipper • Comes with brackets & straps for secure mounting • Non-abrasive material on bottom of bag so it won't scratch Tour-Pak Included Items: Rain Cover, Shoulder Strap, Protective Cloth, & Mounting Brackets Dim: 26" Wide x 9.5" High x 18.5" Deep Cubic inches: 2,845

K4168 PakMaster

TOUR TRUNK ROLL BAG FEATURES

• Mounts on Tour-Pak luggage rack or sissy bar rack • Leather accents for style • Cargo net inside lid keeps items handy

CLAM SHELL-STYLE LID FOR EASY ACCESS

• 2 D-rings hidden under each side pocket help secure bag to the motorcycle • Retractable locking device lets you lock the bag to the bike • 1200 denier & semi rigid construction for durability & shape retention whether empty of full Included Items: Bag, Retractable Cable Lock, Mounting Straps & Rain Cover Dim: 10” Tall x 12” Deep x 19” Wide Cubic Inches: 1,492

K4142 Tour Trunk Roll Bag

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

223

FIVE STAR ACCOMMODATIONS FOR YOUR PET

Dishes & Stakes

PET PALACE

Does your small pet like to ride? If so, we have the safest, stylish, & most convenient solution! Pl PPlace lac acee yo your our p pet et ettim ime. e EEquipped q ip qu ippe pp d with with wi inside, strap it to the bike & you're ready to take your favorite pet on the safari of a llifetime. ood oo d di ishh hholder od ol deer for f r fo more features than you can shake a stick at - A drink holder for you & a ffood dish e sh, two large st stor orage your pet. Also a removable washable faux fur comfort liner, built in lea leash, storage compartments & four mesh windows for viewing & ventilation.

K4198

FEATURES

• Reflective piping for visibility • Highly water resistant fabric, no rain cover needed • Mount on a luggage rack (with or without Tour-Pak) or passenger seat • Top window opens allowing pet to pop it’s head out • Internal frame & rigid bottom provides support • Carrying handle for easy portability • Bottom & top zipper open for easy cleaning • Can be used as a kennel or pet house for travel Included Items: Adjustable leash, 2 dishes, 4 metal stakes for securing to the ground, & adjustable straps for mounting to the motorcycle Dim: 18-1/2" Long x 15” Wide (with pockets) x 13” High Cubic inches: 2,765 (Inside only)

K4199 Pet Palace, Black K4198 Pet Palace, Grey

224

ULTRA TOUR BAG FEATURES

• Large center compartment & 2 large end compartments per side • Fully zipped end doors & large hatch allows ample access to main compartment from most sides • Expandable side compartments provide extra room when you need it • Wide hook-&-loop belt securely attaches bag to any backrest ACCESS FROM BOTH SIDES Super Secure Adjustable Strap

• Weather resistant construction & self sealing water proof zippers w/glove friendly pulls • 1200 Denier & semi rigid construction for durability & shape retention • Plenty of sturdy d-rings to attach additional items to bag Included Items: Bag, Shoulder Strap, Two Adjustable Universal Straps & Rain Cover Dim: 16-1/2” High x 16” Wide x 15” Deep (Expands to 20” Wide) Cubic Inches: 3,960 Expanded: 5,280

K4148 Ultra Tour Bag

ALL 4 END POCKETS E XPAN D 2”

CLASSIC TOUR BAG

Super Secure Adjustable Strap

FEATURES

• Zippered ends & large hatch allow access to main compartment from almost all sides • Expandable side compartments provide extra room when you need it & keep the bag narrow when you don’t • Weather resistant construction & waterproof self sealing zippers with glove friendly pulls • 1200 Denier & semi-rigid construction for durability & shape retention whether packed full or empty • Wide hook-&-loop belt securely attaches bag to any backrest Each End Expands 1.5” • Convenient shoulder strap makes it easy to carry into the hotel after a long ride • Semi-rigid construction provides support so the bag retains its shape – even when empty Included Items: Bag, Shoulder Strap, Two Adjustable Universal Straps & Rain Cover Dim: 12” Long x 11” High x 21” Wide (Expands to 24”) Cubic Inches: 1,995 Expanded: 2,280

K4144 Classic Tour Bag

WORKS GREAT ON TOUR BOX LUGGAGE RACKS TOO!

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

225

K4133

F O R A G R E AT TO U R I N G COMBO COMBINE OUR U LT R A T O U R B A G & D A I LY T O U R B A G !

K4133 Doesn’t Require Luggage Rack when Mounting on Backrest

DAILY TOUR BAG FEATURES

• Large front hatch & end hatch allow ample access for loading & unloading • 1200 Denier & semi-rigid construction for durability & shape retention • Side pockets for additional storage

MOUNTING OPTIONS

• Waterproof zippers with rain cover Included Items: Bag, Shoulder Strap, Adjustable Universal Straps, “Y” Strap & Rain Cover Dim: 12” Long x 10” High x 15” Wide Cubic Inches: 1,425

• Backrest with or without a luggage rack (with 10” of clearance from the top of the backrest down) • Solo luggage rack

K4133 Daily Tour Bag

TOMBSTONE BAG

• Tour-Pak luggage rack (Works great on large or small Tour-Pak racks)

K4148

GRAND ROLL BAG

U.S. Patent 6,802,440

FEATURES

• Provides solid lumbar support that serves as both a rigid frame backrest & a bag - includes 3 thickness sizes for backrest pads

• Additional storage space for the front of your bike

• Zippered pockets, clips & pouches keep everything organized

• Easy mounting with no need for sissy bar or luggage rack

• Designed to mount on all motorcycles with a passenger backrest • Solid PVC frame for support Included Items: 1/2” Pad, 2” Pad, 3” Pad, Inside Frame (Removable for Helmet Storage), Inside Pocket with Elastic Straps, Inside Pocket with Mesh Front, Two Side Bags, Rain Cover, Four Straps with Clip & Shoulder Strap Dim: 12” Long x 12” High x 9” Wide MOUNTS ON LUGGAGE RACKS TOO!

Cubic Inches: Without Side Bags 1,188 with Side Bags 1,958

K4143 Tombstone Bag

• 1200 Denier & semi-rigid construction for durability & shape retention whether full or empty & with leather accents for style • Fully weatherproof with an internal nylon shell & rain cover for added protection • Mounts to bike with attached universal mounting straps Included Items: Bag, Rain Cover & Shoulder Strap Dim: 8” Diameter x 16” Long Cubic Inches: 804

K4146 Grand Roll Bag MOUNTS ON LUGGAGE RACKS TOO!

BUILT-IN DRIVER BACKREST!

226

Pull Handle

Expandable 1-1/2”

REMOVABLE END BAGS!

Mount on a Tour-Pak® Luggage Rack

GRANTRAVELER BAG

EXPANDABLE DRINK HOLDERS MOUNTING OPTIONS

FEATURES

• On top of passenger seat with slant forward or backward

• Stylish motorcycle & airplane carry-on luggage all in one • Pullout handle & wheels add ease to transport to & from motorcycle

• Under passenger seat with slant forward or backward

• Expandable top gives you the extra room when you need it • Two removable end bags with straps or belt clips to take items with you • Weather resistant 1200 denier & semi-rigid construction for durability & shape retention with leather accents for style

Mount on a Luggage Rack as a Tour Trunk

• Additional internal & external compartments for small items Included Items: Bag with Two Removable End Bags, Waist/Shoulder Straps for End Bag, Rain Cover & Adjustable Universal Straps Dim: 17” Long x 22” Wide x 11” Deep (Expands to 12-1/2” Deep) Cubic Inches: 4,114 Expanded: 4,675

K4149 GranTraveler Bag

• Full mounting options for motorcycles with turn signals mounted at the end of the rear fender or applications with Small Silver Bullet Turn Signals (pg 94)

Note: Applications with larger turn signals mounted to fender struts may limit the number of mounting options. Depending on the specific mounting, these bags may limit access to passenger Mount on a Passenger Seat footpegs.

Becomes a Backpack!

MINI GRANTOUR BAG FEATURES

• Doubles as a backpack • The Center Compartment Expands to 1-1/2 Times Original Size with Pop Up Semi-Rigid Support to Hold its Shape

Expands

4”

• Large enough to hold most helmets • Padded backpack straps with waist strap • Can be mounted on a backrest without a luggage rack • 1200 Denier & semi-rigid construction for durability & shape retention with leather accents Included Items: Backpack Bag with Motorcycle Mounting Pad, Padded Shoulder Strap, Rain Cover, Adjustable Universal Strap & Adjustable Mounting Strap, Y-strap Dim: 14” Long x 14” Wide x 8” Deep (Expands to 12” Deep) Cubic Inches: 1,568 Expanded: 2,352

K4167 Mini GranTour Bag Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

227

M O U N T G R A N T R AV E L E R O N TO P O F G R A N T H ROW- OV E R S A D D L E B AG S FO R A P E R F EC T TO U R I N G S E T- U P !

GRANTHROW-OVER SADDLEBAGS End Expands

FEATURES

• Throw-over convenience - mount or remove in seconds with adjustable mounting belt & universal straps for additional security

2-1/2”

• No saddlebag supports or mounting brackets required • Collapsible hidden drink holders • Internal & external accessory pockets • Fully adjustable to fit almost any motorcycle • Expandable main compartment for extra space • Heat-resistant material on bottom of bag • Weatherproof construction & included rain covers • 1200 Denier & semi-rigid construction for durability & shape retention with leather accents for style Included Items: One Pair of Saddlebags, Rain Covers & Adjustable Universal Straps Dim (Each): 24” Tip to Tail Slanted Saddlebags, 12” Tall x 8-1/2” Wide (one end Expands to 11” Wide) Cubic Inches: 2,448 per bag Expanded: 3,168 per bag

K4171 GranThrow-Over Saddlebags

CUSTOM ROLL BAG FEATURES

• Zippered ends & large hatch allow access to main compartment from almost all sides • Expandable main compartment provides extra room when you need it & keeps the bag narrow when you don’t • Waterproof zippers & rain cover • 1200 Denier & semi-rigid construction for durability & shape retention whether empty or packed full • Universal mounting straps provide endless mounting options • Can be mounted on a backrest with or without a luggage rack Included Items: Bag, Rain Cover & Shoulder Strap, Y-Strap Dim: 8” Diameter x 19” Length (Expands to 23”) Cubic Inches: 955 Expanded: 1,156

K4166 Custom Roll Bag Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

228

MAIN COMPARTMENT EXPANDS 4”

Pull Strap

Rigid Plastic Molded Insert

Super Secure Adjustable Strap

ALL THE CONVENIENCE OF A T WO-PIECE LUGGAGE SYSTEM IN ONE! J US T E XPA N D TO P W H E N N E E D E D!

Compressed

FULL DRESSER BAG

Expanded

The most complete, versatile piece of motorcycle specific luggage available. FEATURES

• No unpacking - gain access to items packed on top or bottom by way of a unique wrap-around heavy-duty zipper • Mesh inside pockets & heavy-duty quick-snap buckles operate even with gloves on • Super-secure 9” wide mounting strap mounts to any backrest • Mount to a variety of locations quickly & easily with a variety of straps & D-rings • Rigid plastic molded insert provides added stability to keep clothes neat & wrinkle free & ensures bag will sit nicely & ride smoothly while empty • Enough room for two leather jackets or a full-face helmet in expandable top - folds neatly away when not needed • Two adjustable straps let you tie bedrolls, tents, or jackets above the roomy top compartment • Sturdy wheels provide quick & easy mobility • Large 3-1/2” side compartments contain reinforced piping & waterproof zippers Included Items: Bag, Adjustable Universal Straps, & Rain Cover Dim: 12” Wide Main Compartment (Overall Width 18”), 10” Deep x 18” Tall (Top Compressed), or 25” Tall (Top Expanded) Cubic Inches: 3,240 Expanded: 4,500

K4140 Full Dresser Bag

GRANTAILGATER BAG FEATURES

• Pull out handle & wheels for easy transportation • Top & front access to main compartment & multiple external compartments • Transform two compartments into one main compartment when needed • Front of bag zips down with side supports to create a tailgate table for fun on the road • Removable cooler bag fits in bottom compartment & holds 6-12oz cans with ice • 1200 Denier & semi-rigid construction for durability & shape retention with leather accents • 9” Wide adjustable mounting strap • Adjustable driver backrest when mounted on passenger seat Pull Handle

Included Items: Bag with Tailgate Feature, 6-Pack Cooler Bag, Adjustable Mount Straps, Rain Cover, & Backrest Pad Dim: 21” Tall x 17” Deep (Plus 1-1/2” for Handle) x 24” Wide Included Cooler Bag

Cubic Inches: 6,402

K4172 GranTailgater Bag

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

229

ULTIMATE WEEKEND COMPANION!

GRANTOUR BAG • Multiple mounting options: Passenger seat without backrest, sissy bar or luggage rack • Adjustable lumbar support for riders back • Large, glove friendly zippers • 1200 Denier & semi- rigid construction for durability & shape retention & leather accents for style • Weather resistant • Eight separate compartments for packing • Retractable locking device to secure bag to bike Included Items: Bag, Passenger Seat Mounting Pad System, Adjustable Straps, Retractable Lock, Rain Cover, & Backrest Pad Dim: 18” Tall x 14” Deep x 20” Wide Super Secure Adjustable Strap

Cubic Inches: 3,744

K4141 GranTour Bag

JUST GRAB & GO!

REMOVABLE LINER FOR H - D TOUR- PAK®

SADDLEBAG LINERS After a long day in the saddle you want to easily grab your things & get to where you’re spending the night. These removable Saddlebag Liners not only keep things organized, they have handles & a shoulder strap to make unloading & carrying your luggage quick & easy. Fits: All H-D OEM hard & leather Road King saddlebags

Your Tour-Pak is a big, open space. Organize it with our Tour-Pak Liner. The best part? When you get where you’re going, you can unload everything in one trip. Just grab the handle & pull the liner out, then sling it over your shoulder & carry it to wherever you’re staying.

K4177 Removable Liner for H-D Tour-Pak (ea)

K4170 Saddlebag Liners (pr)

K4177

K4170

230

MAGNETIC TANK MOUNT! Expands ds

3”

GRANCRUISE SE BAG FEATURES

• Windowed top pocket for map or GPS • Quick detach side pockets & zip out beverage holder • Multiple mounting options • Middle compartment with organizer pockets & expandable lower compartment • 1200 Denier & semi-rigid construction for durability & shape retention & leather accents for style Included Items: Bag, Shoulder Strap, Soft Tank Pad, Side Pocket & Bottle Holder, Universal Mounting Straps, “Y” Strap, Rain Cover Dim: 11” Long x 11” Wide x 4-1/2” Deep (Expands to 7-1/2” Deep) Cubic Inches: 423 Expanded: 726 Mount Directly on a Tank

K4139 GranCruise Bag Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

INCLUDES FLIP - OUT 5” X 7” MIRROR!

LID ORGANIZER BAG FOR H - D TOUR- PAK®

Is your Tour-Pak beginning to resemble the junk drawer in the kitchen? At least keep important or fragile items at your fingertips with the Lid Organizer Bag. A variety of padded & see through mesh compartments offer protection & easy accessibility for frequently used items. Who says you can’t take it with you? Quick disconnect hook-&-loop & handles make it easily portable. Included Items: Lid Organizer Bag, Hook-&-loop Mounting Strips, 5” x 7” Mirror Dim: 13” x 20” (open) Fits: H-D King, Ultra, or Chopped Tour-Paks (Does not fit leather Tour-Paks)

MULTIPLE COMPARTMENTS FOR ALL YOUR NECESSITIES

K4134 Lid Organizer for H-D Tour-Pak (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

231

NO MORE STRUGGLING TO MOUNT YOUR LUGGAGE!

TOURING BAG SUPPORT PLATFORM BY C.E . SMITH INC.

U.S. Patent 6,299,042

Make the difficult task of attaching luggage to your bike a thing of the past! The Touring Bag Support holds your luggage neat & upright for a more balanced load & prevents bags from sagging over onto your fenders or turn signals. Made of engineered polymers for strength & durability, it easily attaches to an existing luggage rack with the included industrial grade-exterior hook-&-loop straps with large mounting holes that allow limitless mounting points for your luggage. Large enough to accommodate even the largest of bags, yet mounts without looking bulbous & awkward.

K7146 Touring Bag Support (ea) Note: For use with luggage racks only. Does not mount on seat.

TIE-DOWN BRACKET/ CABLE GUIDE These handy brackets quickly & cleanly provide anchor points for securing luggage or other items to your motorcycle. Mounting hole accepts up to a 3/8” (or M10) screw. Fits: Universal applications as tie down bracket. As a cable guide replaces H-D OEM 38623-68

THE RIDE GUIDE

CUT- OUT TO ACCOMMODATE EXHAUST

This is without question a must for people who really ride. Informative & easy to follow, advising you of the best places to stay, eat & see. Use one & you’ll never travel without it again.

K42 Appalachian Edition:

K4179 Tie Down Bracket (pr)

Kentucky, West Virginia, Virginia, North Carolina & Tennessee, plus sections of five adjoining states (200 pgs)

UNIVERSAL BAG MOUNTING KIT Mount virtually any Küryakyn Motorcycle Luggage, or similar luggage with D-rings on lower portion of bag, with our Universal Bag Mounting Kit. INCLUDES

K5396

1 - Universal Adjustable Under Seat Mounting Pad 2 - Universal Adjustable Fold-Over Hook-&-loop Straps with Securing Metal End Hook, 36” Long by 1” Wide (Working Length 26”) 2 - Universal Hook-&-loop Straps, 8” Long by 1” Wide 4 - Universal Adjustable Strap with Clips & Securing Metal End Hook, 32” Long by 1” Wide Note: Under seat motorcycle pad not suggested for use with K4140 Full Dresser Bag when expanded or other bags taller then 18”. Under seat mounting pad requires a smooth or recessed surface under passenger seat. Not suggested for H-D V-Rod, Badlander style seats, or passenger seats that are smaller than 6” wide & 1.5” thick.

K4175 Universal Bag Mounting Kit

232

C LO S E - U P O F L AT C H I N P / N K 5 39 8

SADDLEBAGS FAIRING FACTORY EXTENDED & STOCK REPLACEMENT SADDLEBAGS Hands down, these are the best saddlebags available! Sturdy, injection molded ABS construction ensures perfect fit & the extended version provides extra usable storage space & a great custom look! FEATURES

• Extended Bags Designed for Dual Exhaust • Sets include bags & lids. All mounting holes match stock locations. Re-use stock hardware for a true bolt-on experience. • Raw finish – Molded with highly polished tooling so minimal prep required before priming & paint

K5396

• Readily accepts our Lid Accents (P/N’s K8646, K8647, K7764) • If reusing existing stock hardware, requires 4 wear plates (H-D P/N 90962-93) - sold separately. • Complete Hinge/Latch/Hardware Kits available separately (See Below) Fits: ’93 and up H-D Touring Models

K5396 Fairing Factory Extended ABS Saddlebags (set)

K5397 Fairing Factory Stock Replacement ABS Saddlebags (set)

BOTH STYLES RE-USE STOCK HARDWARE FOR A TRUE BOLT- ON EXPERIENCE!

K5397

FAIRING FACTORY SADDLEBAG HINGE/LATCH KITS Fairing Factory offers two complete Hinge/Latch Kits; one includes OE Style latch plates & the other, their custom Swingblade Style. Both kits include everything you need (except locks) to completely outfit a set of stock Replacement or Extended Bags. Great for anyone converting from leather bags or looking to keep their stock bags complete.

K5398

Fits: Fairing Factory & ‘93-’12 H-D Hard Saddlebags

K5398 With Swingblade Style Latch Covers (kit)

Note: Locks must be purchased from authorized H-D dealership.

K5399 With OE Style Latch Covers (kit)

C LO S E - U P O F L AT C H I N P / N K 5 39 9

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

233

EDGE SADDLEBAGS K5380

SADDLEBAGS

Not your average saddlebags! Completely reinforced at all critical points, they scream leather yet function like hardbags. They’ll hold their shape & will not sag. Created with strength & ruggedness in mind for unsurpassed longevity. All bags feature removable shoulder straps, quick release buckles & internal pockets. Lockable versions available for many models. Universal - Will work on any bike with almost any hard mount system.

MODEL 102

Lock

MODEL 104

Dim: 20” Long x 7-1/2” Wide x 11-1/2” High

K5380 Plain (pr) K5381 Studded (pr) K5370 Plain-Lockable (pr)

Lock

Dim: 23” Long x 8” Wide x 13-3/4” High

K5384 Plain (pr) K5385 Studded (pr) K5372 Plain-Lockable (pr)

Circle Lock

Dim: 19-1/4” Long x 7-1/4” Wide x 12-3/4” High

K5382 Plain (pr) K5383 Studded (pr)

Rectangle Lock

K5371 Studded -Lockable (pr)

MODEL 105

K5373 Studded-Lockable (pr)

Circle Lock

Rectangle Lock

Loc Lock

MODEL ODEL 110 Slanted to accommodate for shocks. Works great on bikes with high exhaust. Dim: 20” Long x 7-½” Wide x 11-½“ High

K5390 Studded (pr) K5391 Plain (pr) K5375 Studded-Lockable (pr) Circle Lock

MODEL 110XL

MODEL 112 M

Slanted to accommodate for shocks. Works great on bikes with high exhaust.

Lockable.

Dim: 20” Long x 9-½” Wide x 11-½“ High

K5377 Studded (pr) K5376 Plain (pr)

Dim: 27” Long x 10-1/2” Wide x 15” High Actual length at mounting point: 18”

MODEL 108 Lockable Dim: 20” Long x 7-3/4” Wide x 11-1/2” High

K5386 Plain (pr) K5387 Studded (pr)

K5392 Studded (pr) K5378 Plain (pr)

K5374 Plain- Lockable (pr) Circle Lock

MOST DURABLE & EASY QUICK DISCONNECT SADDLEBAGS ON THE MARKET!

234

NO ONE DOES IT BETTER! Outfit your bike with great looking saddlebags that outperform the rest – but also gain the freedom of having the ability to take the bags off when you don’t need them! Küryakyn has teamed up with Edge Leather & Edge Quick Detachable Brackets to bring you the most complete, versatile Quick Release System in the industry. Once the correct brackets are installed, put on or take off your saddlebags (with no tools) in mere seconds & no obnoxious hardware is left behind! Purchase a Complete Package or purchase the Edge Brackets alone to be used with OEM or other brand bags.

K5392

BAGS + BR AC KE TS + HARDWARE = TH E COM PLE TE PAC K AG E

HOW TO ORDER:

1 . SELECT BAG THAT B EST FITS YOUR ST YLE & NEEDS 2 . SELECT CORRECT B R ACKET ACCORDING TO BAG CHOICE & MOTORCYCLE APPLICATION

SELECT CORRECT MOTORCYCLE SPECIFIC MOUNTING KIT

Remaining Docking Hardware 2 LOCKS TO CHOOSE FROM

XL 112

110

el od

el od M

110

10 8 od M

od M

10 5

10 4 el

el od M

APPLICATION

10 2

BRACKETS

Heritage Softail®

‘84 & up

K3482

Softail® Springer® Classic & Heritage Springer®

‘85 & up

K3481

K3482

K3481

K3482

All other Softail® Springers w/150-170 stock rear wheel tire

‘84-’05

K3481

K3482*

K3481

K3482*

All other Softail® Springers w/200 stock rear wheel tire

‘06 & up

K3484

K3482*

K3484

K3482*

Softail® Deuce™

‘84 & up

K3481

N/R

K3481

N/R

Softail® Deluxe - FLSTN/FLSTNI

‘84 & up

K3482

All other Softail® Models w/150-170 stock rear wheel tire

‘84-’06

K3481

K3482*

K3481

K3482*

All other Softail® Models w/200 stock rear ‘06 & up wheel tire

K3484

K3482*

K3484

K3482*

Older Harley Big Twin Models

All

K3481

K3482

K3481

K3482

Sportster® Models

‘85 & up

K3481*

N/R

K3481*

N/R

Dyna Models

‘96 & up

K3482**

* Turn Signal Relocation Required ** Turn Signal Relocation Required (except on ‘07-’11 Fat Bob & ‘96-’08 Wide Glide) *** All OEM & Aftermarket Bags that are molded on the Inner (Fender) Side of the Motorcycle Require a Molded Bag Bolt Kit (P/N Gb1-Sk-OEM-Bag) N/R - Not Recommended

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

235

H-D B ac Det a kre cha st 1 b l e H-D B ac Det a kre cha st 2 b l e

st 2 Ha rdm B ac ou kre nt st 1 Ha rd B ac m ou kre nt st 2

kre No

Heritage Softail®

‘84 & up

K3306

K3307

K3308

K3309

K3310

K3311

Softail® Springer® Classic & Heritage Springer®

‘84 & up

K3307

K3309

K3311

Softail® Springer® Screamin’ Eagle

‘07 & up

K3312

K3313

K3309

K3314

K3311

All other Softail® Springers w/150-170 stock rear wheel tire

‘84-’05

K3306

K3307

K3308

K3309

K3310

K3311

All other Softail® Springers w/200 stock rear wheel tire

‘06 & up

K3315

K3307

K3313

K3309

K3314

K3311

Softail® Deuce™

‘84 & up

K3316

N/R

Softail® Deluxe - FLSTN/FLSTNI

‘84 & up

K3306

K3307

K3308

K3309

K3310

K3311

All other Softail® Models w/150-170 stock rear wheel tire

‘84-’06

K3306

K3307

K3308

K3309

K3310

K3311

All other Softail® Models w/200 stock rear wheel tire

‘06 & up

K3315

K3307

K3313

K3309

K3314

K3311

Older Harley Big Twin Models 5/16 applications

All

K3317

K3318

N/R

Older Harley Big Twin Models 3/8 applications

All

K3319

K3320

N/R

Sportster® Models

‘85-’93

K3321

N/R

Sportster® Models

‘94-’03

K3322

K3323

K3324

Sportster® Models

‘04 & up

K3325

K3326

K3327

Dyna Models

‘96-’03

N/R

K3328

N/R

K3328

N/R

K3329

Dyna Models

‘04-’05

N/R

K3328

N/R

K3328

N/R

K3330

‘06 & up

N/R

K3331

N/R

K3331

N/R

K3332

B ac

kre

st 1

MOUNTING KITS

WE CAN FIT MORE MOTORCYCLE BRANDS & MODELS THAN ANYONE - PERIOD!

APPLICATION

Dyna Models 1- For use with P/N K3481 or K3484 Brackets

2 - For use with P/N K3482 Bracket

PERSONAL POUCH Now you have a quick way to store your glasses, wallet, phone, or anything else you need to access quickly. Can be mounted on any saddlebag or worn on your belt. Constructed with tek leather for long lasting looks & solid construction.

K5379 Personal Pouch (ea)

EEZ CARRY LEATHER HANDLE Conveniently carry both of your saddlebags when you want to remove them from your ride.

K5389 EEZ Carry Leather Handle (ea) For use with Edge Quick Release Saddlebag Brackets.

SADDLEBAG CUP HOLDER Slide onto the inside edge of saddlebag, insert beverage & ride away.

K5388 Saddlebag Cup Holder (ea)

236

TURN SIGNAL RELOCATOR KIT Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area.

K3155 Turn Signal Relocator (kit) Note: The side mount brackets have several mounting points for lights & will accept all H-D OEM rear turn signals. Will not work with Küryakyn Curved License Plate Frames.

TOURING

W I N D S H I E L D S & FA I R I N G S DELUXE FAIRING WITH SONY DSX-S100 RECEIVER Küryakyn has taken our top-shelf AirMaster Fairing to the next level! It now comes with a cutting edge Sony DSX-S100 Digital Music Receiver. Our fairing has not just caught up with, but is ahead of its time. While not losing touch with traditional styling, our fairing adds subtle & classy styling improvements to set your bike apart from the crowd. The AirMaster Fairing packs industry leading conveniences with its lockable glove box, standard 12v power points, speakers designed by Hogtunes, & beautiful gloss black paint – We’ve taken a great product & made it even better!

FEATURES

• Gloss finish color-matched to H-D Vivid Black on outer fairing – choose to leave it black or custom paint it to match your bike • Lightly textured black inner fairing resists finger prints & other marks • Cigarette lighter/12V power point (left side of inner fairing) • 4” Dark smoke windshield (interchangeable with any ’96 and up Electra Glide windshield) • Chrome mounting brackets • Glove Compartment featuring: - Sealed, lockable storage - Rubber mat keeps items from shifting; Easily removable for cleaning - Built-in cigarette lighter/12v power point - Door marked for easy installation of GPS mount cradles (4-hole AMPS pattern)

• Sony Stereo – DSX-S100 Digital Music Receiver (52 watts x 4 at 4 ohms) - AM/FM – 30 presets (18 FM, 12 AM) - Integrated Tune Tray with USB connector to securely store your iPod®, Walkman® or other USB device inside the stereo - Direct Control of iPod* - Includes USB Connector for iPod - Satellite Radio/HD Radio Ready (tuners not included) - Flip-down Face with Front Aux In - 12v Trigger Output for Amplifier Turn On - Front & Rear/Sub Selectable RCA Pre-amp Outputs - Wireless Remote • 5” x 7” Speakers specifically designed & tuned for use on a motorcycle by Hogtunes, Inc -No off-the-shelf car audio speakers!

K1334 Fits: ’94 and up Road Kings (except ’04-’07 FLHRS) (ea) K1335 Fits: ’86 and up Heritage, ’93-’96 FLSTN, & ’05 and up Deluxe (ea) Note: Installation is possible on ’04-’07 FLHRS & ’90 and up Fat Boy, however the customer is responsible for relocation of stock handlebar mounted turn signals & sourcing hardware necessary for installation. It also requires removal of chrome wind deflector from headlight nacelle on FLHRS

COMPONENTS FOR AIRMASTER® FAIRING

K1321 K1323 K1324 K1325 K1326 K1327 K1328 K1329

Küryakyn 5” x 7” Speakers with Grills (pr) Cota Micro Screen Antenna (ea) Replacement Speaker Grills (pr) Replacement Outer Fairing Shell (ea) Replacement Inner Fairing (ea) Glove Box, Complete Assembly Cigarette Lighter/Power Point (ea) Lock/Keys (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

237

LIGHT & DARK SMOKE WINDSHIELDS

K1357

K1358

You’ve decked out your Bagger with enough chrome to blind a guy with welding glasses, now it’s time to do something about that stock, utilitarian windshield. Manufactured from premium quality, optically clear, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact. Fits: ’96 and up Electra Glides, Street Glides, & Trikes; Küryakyn AirMaster Fairing & Sportech Detachable Fairing Plus 4” WINDSHIELD

K1356

K1355 4” Dark Smoke (ea) 6” WINDSHIELDS

K1356 Light Smoke (ea) K1357 Dark Smoke (ea) 8” WINDSHIELDS

Shown with Windshield Trim (P/N K1371 - pg 174)

K1358 Light Smoke (ea) K1359 Dark Smoke (ea)

WINDSHIELD MOUNTING SPIKES Your bike will look as tough as a junkyard dog with these knurled windshield mounting spikes. These 1/4”-20 x 5/8” spikes can be used to mount windshields on ’96 and up Electra Glides, Street Glides & Trikes as custom license plate hardware or anywhere else you need custom screws.

K1369 Windshield Mounting Spikes (set/3)

Shown with Windshield Trim (P/N K1370 - pg 178)

TOURING WINDSHIELD 14””

21”

FOR ROAD GLIDE

Get rid of that frumpy stock windshield & replace it with a piece that transforms the look of your bike from city bus to private jet. The windshield’s contours complement the lines of both the inner & outer fairing while directing the wind up & over the rider with minimal turbulence. Light smoke, premium quality, hard-coated polycarbonate provides impact resistance not possible with acrylic shields. The bottom edge is masked for a neat appearance with or without our Windshield Trims.

K1364 Fits: ’98 and up Road Glides (ea)

238

SPORT WINDSCREEN FOR ROAD GLIDE Unlike other short windshields on the market, our Sport Windscreen directs air smoothly over the fairing resulting in constant, predictable wind pressure without annoying buffeting & turbulence. Dark smoke, premium quality, hard-coated polycarbonate provides impact resistance not possible with acrylic shields. The masked bottom edge offers an exceptionally clean appearance. Important: Riders will feel wind pressure on their face. Windshield is 11-1/2” Tall from base to top & sits 2” higher than stereo surround. If wind protection is of primary importance & you do not like wind in your face, we suggest our Touring version (P/N K1364).

K1363 Fits: ’98 and up Road Glides (ea)

K1348

K1361

K1362

6” THEMED WINDSHIELDS Küryakyn is fired up to offer these top-quality, custom windshields for H-D Touring Models. Custom-formed from premium materials using proprietary processes. Crown your bagger with the coolest windshields available.

K1347

• Manufactured from premium quality, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact. • Graphics are screen printed with proprietary inks making the images unbelievably sharp & durable at the same time.

K1343

• Windshields are opaque. Take into account that you must maintain a clear line of sight over the windshield. The windshield should not obstruct your vision in any way. Fits: ’96 and up Electra Glides, Street Glides & Trikes; Küryakyn AirMaster Fairing & Sportech Detachable Fairing Plus

K1375

K1361

Zombie (ea)

K1347

Patriot (ea)

K1362

Flame (ea)

K1348

Armed Forces (ea)

K1343

Firefighter (ea)

K1375

Crosses & Thorns (ea)

EXCELLENT WIND P ROTEC T I O N & U N M AT C H E D S T Y L E

AERODYNAMIC WINDSHIELD FOR ELECTRA GLIDE

& STREET GLIDE

With an unmistakable look & vast improvements to wind protection, our Aerodynamic Windshield is a sure thing! Short windshields definitely look cool but the buffeting & wind noise can be annoying. Our design features a sweptback profile, a wedge-shaped raised center section, & a slightly flipped trailing edge. Fits: ’96 and up Electra Glides, Street Glides, & Trikes; Küryakyn AirMaster Fairing & Sportech Detachable FairingPlus

REPLACEMENT WINDSHIELDS FOR ROAD KING Replace your beat-up, scuffed up, hazy stock Road King windshield & upgrade the visible hardware at the same time! Includes .125” optical grade, hard-coated polycarbonate windshield, chrome-plated cross & vertical braces – you keep your support plates & docking hardware! Fits: ’94 and up Road Kings MID (23”W X 24-1/2”T) TALL (23”W X 26-3/4”T)

K2626 Light

Smoke (ea)

K1354 Light Smoke (ea) K1349 Clear (ea)

K2627

Clear (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

K2628 Light Smoke (ea)

K2629 Clear (ea)

239

Rider Shown is 6’ Tall

QUICK RELEASE WINDSHIELDS FEATURES

• 6° of Angle Adjustment - Eccentric lower mounting point can be positioned forward or back during installation to tailor windshield angle • Premium .125” Optical Grade, Hard-Coated Polycarbonate • Interchangeable Zombie & Grooved Emblems • Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is beautifully stamped & chrome-plated for a rich, classy appearance • Three heights; Low, Mid, Tall – Choose your own look & level of wind protection

WINDSHIELD STYLES

MOUNTING KITS 39 MM NARROW GLIDE Fits: ’88 and up Sportster Models (except ’09 and up XR1200/X, ’10 and up XL1200X, ’11 and up XL883L), ’91-’05 Dyna Models (except ’93-’05 FXDWG), ’88-’94 FXR Models, & ’99-’00 FXR2/3/4 FOR

LOW K2614

SMALL CUT- OUT

22”

K2614 Light Smoke (ea) K2615 Clear (ea) LARGE CUT- OUT

K2620 Light Smoke (ea) K2621 Clear (ea)

23”

K2600 For 39mm Narrow Glide (ea)

Choose Windshield with Small Cut-Out

41MM WIDE GLIDE Fits: ’85-’10 FXST Models (except Springer, Deuce & Rocker/C), ’93-’05 FXDWG, & ’80-’85 FXWG FOR

K2601 For 41mm Wide Glide (ea)

Choose Windshield with Small Cut-Out

MID

FOR HERITAGE , DELUXE , SMALL CUT- OUT

K2612 24-½”

K2612 Light Smoke (ea) K2613 Clear (ea) LARGE CUT- OUT

K2618 Light Smoke (ea) ea)) K2619 Clear (ea) 23”

TALL K2611

26-¾”

SMALL CUT- OUT

K2610 Light Smoke (ea) a)) K2611 Clear (ea) LARGE CUT- OUT

K2616 Light Smoke (ea) a) K2617 Clear (ea) 23”

Attention Heritage Classic Riders! If your stock windshield is hazy & beat up, any of our large cut-out windshields can be used with your stock brackets See clearly & add style at a great price!

240

& FAT BOY Fits: ’05 and up Deluxe, ’90 and up Fat Boy, ’86 and up FLST/C, ’93-’96 FLSTN

K2602 For Heritage, Deluxe, & Fat Boy (ea) Choose Windshield with Large Cut-Out

A I R & H E AT D E F L E C T O R S REFLECTIVE SMOKE SADDLE SHIELDS U.S. Patent 6,854,542

Ever sit in stop-&-go traffic or at that 4-way stoplight that K1316 never seems to change on a hot summer day & the heat coming off your motor is just about unbearable? Well, our frame mounted polycarbonate shields are perfectly positioned to dissipate & re-direct heat away from you & your thighs. Let our Saddle Shields help you enjoy your next ride no matter how hot!

K1188 Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings (pr)

K1196 Fits: ’08 Electra Glides, Road Glides, Street

K1196

Glides, & Road Kings (pr)

K1316 Fits: ’09 and up Electra Glides, Road Glides, Street Glides & Road Kings (pr)

K1186 Fits: All ’00 and up Softail Models (except Deuce & Rocker/C) (pr)

K1317 Fits: ’99 and up Dyna Models (pr) K1313 Replacement Mounting Kit for K1196 K1314 Replacement Mounting Kit for K1187/K1188 K1186

K1317

K1316

DRAGON WING™ VARIABLE AIR DEFLECTORS Guide airflow around the fairing for reduced turbulence during cool weather or open them for a refreshing breeze on those scorching hot days. Adjust to any of four different positions by hand via a spring-loaded mechanism. Shatter resistant polycarbonate construction.

4-ADJUSTABLE POSITIONS TO SUIT YOUR NEEDS

Fits: ’96 and up Electra Glides, Street Glides, Trikes; & Küryakyn AirMaster Fairing

K1117 Reflective Smoke Dragon Wing (pr) K1108 Dark Smoke Dragon Wing (pr) K1119 Replacement Thumb Tabs (pr)

K1117

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

241

K1 K1311

K1312 VARIABLE AIR FLOW!

FORK F ORK MOUNTED VARIABLE W IN N DEFLECTORS WIND

Added A Ad dde d d style & comfort for the long haul. These sleek & smooth chrome b bo olt-o lt-on air deflectors provide just the right amount of air. The sliding bolt-on vvents ve ent en nts ccan be opened or closed depending on conditions.

K1 K 131 311 1 K1311

K1311 K 131 Fits: ’96 and up Electra Glides without Fairing Lowers, ’94 and up Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE) (pr)

Note: Compatible with stock detachable Road King windshields. Will also fit ’06-’12 Street Glides ONLY IF they are equipped with Küryakyn Driving Lights (P/N K5005).

K1312 K 131 Fits: ’86 and up FLSTC & ’93-’96 FLSTN (pr)

Note: Compatible with stock or Küryakyn AirMaster Quick Release Windshields.

ACCENTS FOR H-D MID-FRAME AIR DEFLECTORS H-D’s Mid-Frame Air (Heat) Deflectors are functional, but they have a matte, industrial finish. These spicy little stick-on accents will liven them up instantly. Fits: ’09 and up FLHTCU, FLHTK, FLTRU, FLHTCUSE, FLTRUSE, FLHTCUTG, FLHXXX, or any Touring Model equipped with H-D Mid-Frame Air Deflectors (H-D P/N K58002-09)

K8674 Accents for H-D Mid-Frame Air Deflectors (pr)

ENGINE GUARD CHAPS LOWER TRIPLE TREE WIND DEFLECTOR

Gain additional protection from the elements! Stay warm & help eliminate road spray. Chaps install quickly & easily for a secure fit around your engine guard. TOURING MODELS

SOFTAIL MODELS

Deflect the cold wind away from in-between your legs on your Touring Model with our new air deflector. This beautifully chromed deflector replaces the original black wind deflector or makes a great addition to models that no longer have them from the factory.

Fits: ‘86 and up Road Kings, Ultra, Electra Glides, & Street Glides with Standard Engine Guard

Fits: ‘00 and up FLST Models with H-D Nostalgic Curved Engine Guard (H-D P/N 49037-05A)

K1800 Engine Guard Chaps

K1802 Engine Guard Chaps -

Fits: ’80 and up Electra Glides, Road Glides (except ’11 FLTRUSE, ‘12 and up FLTRU, & ‘12 and up FLTRXSE), Street Glides, Tour Glides, & Road Kings

K1801 Engine Guard

K1803 Engine Guard Chaps

K1100 Lower Triple Tree Wind Deflector (ea)

Note: Not recommended for use in temperatures higher than 55 degrees.

with Drink Holder & Pocket (pr)

Plain (pr)

with Drink Holder & Pocket (pr))

Chaps - Plain (pr)

K1801

242

K1800

ARMRESTS & RELOCATORS

SWING -AWAY DESIGN FOR EASY PASSENGER MOUNTING & DISMOUNTING - ENTIRE ASSEMBLY COMES OFF IN MOMENTS

QUICK DETACH PASSENGER ARMRESTS WITH SWING-OUT DRINK HOLDER U.S. Patent 7,114,774 & D526,952 & Patent Pending Comfort & flexibility unlike any other - The best just got better. These passenger armrests come on & off in minutes with no tools & feature pivot joints with variable tension adjusters for the ultimate fit. Compatible with Küryakyn Quick Adjust Tour-Pak Relocator (P/N K8973). Fits: '98 and up Touring Models (except Trikes) with rigid mounted or detachable King, Ultra, Chopped or Razor-Pak Tour-Paks

K8979 Quick Detach Passenger Armrests with Swing-Out Drink Holder (set) Note: Not compatible with leather covered Tour-Paks or H-D's original detachable Tour-Pak Rack (P/N K53107-96); 53107-96 has a tubular frame, not stamped steel plate.

ATTACHES RIGHT TO OUR PASSENGER ARMRESTS!

PASSENGER ARMREST POUCH This great pouch mounts to the underside of any left side Küryakyn armrest & has room for your essential items such as a cell phone, sunglasses, or iPod. In addition to the armrest mount, our pouch also includes a quick detach system allowing to be used as a fanny pack or purse. Fits: Left side of Küryakyn passenger armrests for Touring Models (P/Ns K8959, K8979, K8981, K8982, K8989, & K8992) Dim: 8-1/4" Wide x 4-1/2" High x 3-3/4" Deep. Cubic Inches: 90

K4196 Passenger Armrest Pouch (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

243

1 ” F O RWA R D

3 ” B A C K WA R D

QUICK ADJUST TOUR-PAK® RELOCATOR Patent Pending

With motorcycles, one size does not fit all. That's why Küryakyn is offering the Quick Adjust Tour-Pak Relocator. The Quick Adjust Tour-Pak Relocator is the first & only to offer a full 4 inches of adjustability without the need for tools. Adjustments can be made without tools 1” forward to 3” back from the stock position, giving you & your passenger the ultimate in comfort. Fits: Late ’00 and up Touring Models (except Trikes) with Rigid Mounted Tour-Pak or ’97 and up Touring Models with H-D Two-Up or Solo Detachable Tour-Pak Racks (P/Ns K53276-04, K53260-02, K53276-09A, K53260-09A, K53246-09A) & a King, Chopped, or Razor-Pak Tour-Pak

K8973 Quick Adjust Tour-Pak Relocator (ea) Note: Not compatible with amplifiers found stock on ‘08-earlier CVO Screamin’ Eagle Models or included in H-D’s “Enhanced Sound System” or Boom! Audio™ products for ‘08-earlier Models. Not compatible with leather covered Tour-Paks. Will fit ‘98 to early ‘00 Touring Models with rigid mounted Tour-Pak if the stock support tube has been replaced with the late ‘00 to ’08 support.

PASSENGER DRINK HOLDER FOR ULTRA CLASSIC Patent Pending

Now you & your passenger can go the extra mile with our passenger drink holders for the Ultra Classic. These non intrusive & easy to reach drink holders are ready for your favorite beverage. Using chrome plating that is durable & made to last, these passenger drink holders look as good as they work. Fits: ’98 and up FLHTCU, ’10 and up FLHTK, ’11 and up FLTRU, ’08 and up FLHTCUSE, ’11 FLTRUSE, & ‘09 and up FLHTCUTG

K1482 Passenger Drink Holder w/Basket - Right Side (ea) K1689 Passenger Drink Holder w/Basket - Left Side (ea) K1493 Passenger Drink Holder w/Stainless Mug Right Side (ea)

Note: Will also fit other ’98 and up Touring Models if equipped w/Accessory Rear Speaker Kit.

244

INFINITE ADJUSTMENTS FROM 1" FORWARD TO 3" BACKWARD

SWING-AWAY DESIG N A L LO W S E A SY M O U N T I N G & D I S M O U N T I N G !

PASSENGER ARMRESTS FOR TRIKES

U.S. Patent D526,952 & 7,114,774

Travel in comfort & style! Enjoy added comfort on those long rides & swing-away design allows for easy mounting or dismounting. A built-in cup holder keeps a cold (or warm) drink at their fingertips & includes a foam can cooler.

K8959

Fits: ’09 and up FLHTCUTG Tri Glide

K8959 Passenger Armrests for Trikes (set) K8985 Replacement Can Cooler (pr)

PASSENGER ARMRESTS FOR DETACHABLE TOUR- PAK®

Designed to work with King or Chopped Tour-Paks on H-D Detachable Two-Up Tour-Pak Rack (P/N K53276-04) or Solo Tour-Pak Rack (P/N K53260-02). Versions are offered for use with or without Küryakyn Relocator Kit for Detachable Tour-Pak.

K8982

K8981 Fits: ’94-’08 H-D Touring Models with Detachable Tour-Paks (set)

K8982 Fits: ’94-’08 H-D Touring Models with Detachable Tour-Paks & Küryakyn Relocator Kit (P/N K8986) (set)

Note: P/Ns K8981 & K8982 are not compatible with H-D’s original Detachable Tour-Pak Rack design (H-D P/N 53107-96). This style of rack has a tubular frame, not stamped as shown. STAINLESS STEEL KÜRYAKYN TRAVEL MUG

Add this travel mug to your Küryakyn Can Cooler for the perfect fit in your Passenger Armrest drink holder.

K8982 K8981

K1469 Stainless Steel Küryakyn Travel Mug (ea)

PASSENGER GRAB RAILS FOR H-D TOURING Part of the thrill of riding a motorcycle is the control & connection to the machine during cornering, acceleration, & braking. But for the passenger the same maneuvers can be a little more spine-chilling than enjoyable. We’ve developed these beautifully chromed & padded Passenger Grab Rails to provide a similar feeling of control & security. Fits: ’99 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

K1609 Passenger Grab Rails for H-D Touring (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

245

BEFORE

RELOCATOR KIT FOR RIGID MOUNTED TOUR-PAK®

U.S. Patent 6,817,501

Gain a few extra inches for going those extra miles. This handy kit moves the Tour-Pak back 2” to provide more room for your passenger. The added space makes things much more comfortable for the passenger & makes climbing on & off much easier, especially if the bike is equipped with a driver backrest. Fits: ’98-’08 Touring Models equipped with Rigid Mounted H-D Tour-Pak

AFTER

K1559 Relocator Kit for Tour-Pak (ea) Note: Not compatible with amplifiers included in H-D’s Boom! Audio™ or “Enhanced Sound System” kits or stock on Screamin’ Eagle Models.

RELOCATOR KIT BEFORE

AFTER

FOR DETACHABLE TOUR-PAK®

As designed, H-D’s Detachable Tour-Pak provides three positions: Full Forward, 1” Back, & 2” Back. Our Relocator Kit effectively shifts this range of adjustment back an additional 2” allowing you to select a position 2” back, 3” back, or 4” back relative to the original full forward position. Fits: ’97-’08 Road Kings, Street Glides, Road Glides, & Electra Glides equipped with H-D Two-Up or Solo Detachable Tour-Pak Racks (H-D P/Ns K53276-04 or K53260-02) & King or Chopped Tour-Paks

K8986 Relocator Kit for Detachable Tour-Pak (ea) Note: Not compatible with H-D’s original Detachable Tour-Pak Rack design (H-D P/N K53107-96). This style of rack has a tubular support frame, not stamped as shown.

SPEED TAB Make taking off your seat a snap! Installation requires no modifications. The spring-loaded latch nestles in a smoothly shaped housing that covers the seat’s mounting tab. Special mounting screw is 1/4”-20 thread (included).

K9037

AFTER

K9037

K9037 Speed Tab Seat Latch (ea)

PAD & FILLER PANEL

SEAT RELEASE

FOR QUICK ADJUST TOUR-PAK RELOCATOR

Take the hassle out of removing your seat. No tools required. Combo Kit includes tang cover & both 1/4”-20 & 1/4”-28 threaded screws. Works well on almost all seats. Installation on ’99-newer bikes requires removal of stock captured thumb screw.

Now that you’ve moved your Tour-Pak back, it’s time to extend that seat a little to fill in the gap. Here’s the answer that’ll install in just minutes using a simple hook & loop design. Great looks with a little extra comfort for your passenger.

K9035 Seat Screw & Beauty Cap Combo

K9038 1/4” - 20 Knurled Screw Only (ea)

246

BEFORE

K9035

Fits: ’97 and up H-D Touring Models equipped with Küryakyn Adjustable Tour-Pak Relocator (P/N K8973)

K5201 Pad & Filler Panel (ea)

RIDER & PASSENGER BACKRESTS F U L LY A D J U S TA B L E ! U P & D OW N FO RWA R D & BAC K

PLUG-IN DRIVER BACKREST FOR TOURING Great comfort at a great price makes the Plug-In Driver Backrest a must have for any rider on long or short hauls. The contoured upholstered backrest comes with a removable back pocket, tool-less height adjustment & removal, & easy installation using the existing fender bolts. Fits: ’97 and up Electra Glides, Road Glides, Street Glides & Road Kings with One-Piece Slotted Seats

K1670 Plug-In Driver Backrest (kit)

DRIVER BACKREST FOR SOFTAIL

CONVENIENT STORAGE POUCH!

If bike parts received Oscar’s, we’d nominate this one for best supporting role. Our Driver Backrest can add miles of comfort to a day’s travel The rider enjoys a reach to the controls tailored to their stature, as well as backrest angle & height adjustments. For passenger convenience, pad assembly folds forward for easy seating. Quick detach mechanism permits fast installation & removal of hoop & pad assembly.

K8987

K8988

K8987 Fits: All ’93 and up Softails (except ’00-’07 Deuce, ’06-’10 FXST/B/C/S, ’07 and up Fat Boys & ’08-’11 Rocker/C) (ea)

K8988 Fits: ’06-’10 FXST, FXSTB, FXSTC, FXSTS, & ’07 and up FLSTF/B (ea)

FREEDOM AIR®SEAT PAD

K5206

K5205

Utilizes two independent air valves with interconnected air cells for added relief & rider comfort where it counts. Simple to install with included attachment loops & black fitted cover.

K5203 Fits: Universal for Most 14” x 13.5” Driver Seats (ea)

SKWOOSH™ GEL MOTORCYCLE SEAT CUSHIONS TekPad® gel relieves pressure, maintains circulation & eliminates numbness & discomfort caused by long rides. The combination of TekPad® gel, Independent Comfort Suspension (ICS) & all welded waterproof construction delivers trouble free cruising comfort in a thin (1”), lightweight (16 oz.) compact shape.

Dim: 13”W x 11”L x 1”H

K5203

Dim: 15 ½”W x 14”L x 1”H

K5204

K5204 Skwoosh Hopper Motorcycle Gel Cushion (ea)

Fits: Smaller Driver Seats & Medium to Large Passenger Seats

K5205 Skwoosh Universal Motorcycle Gel Cushion (ea)

Fits: Works best on Large Driver Passenger Seats

K5206 Skwoosh Mid Size Gel Cushion (ea)

Fits: Works best on Mid-Large Seats, Small Stock/Solo Seats or Large Passenger Seats

Dim: 14”W x 13 ½”L

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

Dim: 15”W x 10 ½”L x ½”H

247

REVOLUTIONARY NEW PRODUCT!

MULTI-PURPOSE DRIVER & PASSENGER BACKREST

Patent Pending

Introducing the first, truly multipurpose backrest & luggage rack system only available from Küryakyn. Once installed, no tools are needed for adjustments making the switch from rider to passenger backrest a snap. Full adjustability will help you enjoy those longer rides & with the incorporated luggage rack, carrying all your stuff just got a whole lot easier. • Truly multi-purpose – provides driver or passenger backrest along with a convenient luggage rack that can be used in either position. • Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest. • Extremely versatile – backrest converts from driver to passenger without tools in seconds. • Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs.

K1660 Multi-Purpose Driver & Passenger Backrest (ea) Note: Backrest & Mounts sold separately - Listed Below. FIXED MOUNTS FOR ‘97-’08 ELECTRA GLIDE STANDARDS, ROAD GLIDES, STREET GLIDES & ROAD KINGS

K1664

K1663 Fixed Low Mounts: For use with low-profile seats 6” thick or less measured at the front of the passenger seat (pr)

K1664 Fixed Tall Mounts: For use with touring seats more than

6” thick measured at the front of the passenger seat (pr)

FIXED MOUNTS FOR ’09 AND UP ELECTRA GLIDE STANDARDS, ROAD GLIDES (EXCEPT FLTRU), STREET GLIDES & ROAD KINGS

K1665 Fixed Low Mounts: For use with low-profile seats 6” thick or less measured at the front of the passenger seat (pr)

Note: Compatible with stock seats on ‘09-’10 FLHX, ‘09 FLTR, ’10 FLTRX, & ‘09 and up FLHRC.

K1666 Fixed Tall Mounts: For use with touring seats

more than 6” thick measured at the front of the passenger seat (pr) Note: Compatible with stock seats on ‘09 and up FLHR & ‘09 FLHT Standard,‘11 and up FLHX,‘11 and up FLTRX.

248

FIRST OF ITS KIND!

SAME GREAT STYLE WITH UPDATED COMFORT

RAPTOR BAR PLUS

The original just got even better! All the style you’ve come to expect now with even more comfort thanks to the new, more plush backrest pad. At 12” tall, this forged bar is just the right height to keep your passenger happy & the bike looking good. Fits: H-D & Standard Universal Metric 8-3/4” wide mounting with 1/4”-20 tapped threads - Requires mounting straps for installation (sold separately)

K1622 Raptor Bar Plus (ea) Note: Not compatible with side plates for Transformer Backrest.

BACKREST COMPONENTS Whether keeping your passenger happy or providing a convenient place to secure luggage, look no further than our good looking, sturdy, & comfortable backrests. Tall & short uprights & comfortable high-density pads endure weather extremes & miles of use. We provide extraordinary support for exceptional bikes! SISSY BARS

Fits: Stock or P&A H-D Sideplates & others with 8-3/4” outside mounting dimension & 1/2” square stock mounting with 1-1/4” mounting hole spacing.

K1587 Short Sissy Bar 15” Tall (ea) K1588 Tall Sissy Bar 20” Tall (ea) Note: These Sissy Bars are not compatible with Küryakyn Fold Down Luggage Rack (P/N K1558), or side plates for Transformer Backrest. BACKREST PADS

PLUG-N-PLAY U.S. Patent D415,980 & 5,984,331 Here’s the easy solution for the rider who carries a passenger but doesn’t like the look of conventional side plates. The Plug-N-Play bolts to the rear fender underneath the passenger seat. It accepts our low, custom Sissy Bar (P/N K8980) & Backrest Pad (P/N K1605) for passenger comfort & convenience. The backrest & pad measures 6-3/4” wide & 9-1/2” high from the rear fender.

K8998

Plug-N-Play (ea) Fits: H-D Models with 130mm, 140mm, or 150mm tires (Softail, Dyna, Sportster, FXR) (ea)

K8980 K1605

Sissy Bar (ea)

Backrest Pad (ea) Note: Each Plug-N-Play assembly is pre-drilled, but does not include mounting hardware. Sissy Bar & Backrest Pad come with all necessary mounting hardware. Backrest height not to exceed 10”.

Fits: Küryakyn Sissy Bars (except Raptor), or other 1/2” square Sissy Bars with the same dimensions (4” inside to inside)

K1601 K1602 K1603 K1604

Tall Backrest Pad (ea) Tall Backrest Pad with Button (ea) Short Backrest Pad (ea) Short Backrest Pad with Button (ea)

K1587

K1588

8-3/4”

K8980 K8998 K1605 6-3/4”

5-1/4” x 9-3/4”

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

5-1/4” x 7”

249

TRANSFORMER™ BACKREST/LUGGAGE RACK

QUICK RELEASE BACKREST & FOLD -DOWN LUGGAGE RACK IN ONE!

U.S. Patent 6,966,471 & Patent Pending

Even the Moonshiners would be jealous of this backrest with hidden fold-down luggage rack. The sweeping oval bars with matching contoured pad flows with the lines of your bike. Literally fold down the inconspicuous luggage rack right out of the backrest when needed & hide it away securely with the integrated thumb nut when you don’t. Your passenger is happy, you can always bring your things, & your bike looks awesome. Mounts directly to the required Küryakyn Quick Detach Side Straps (found below).

K1606

Fits: Kürykayn Quick Release Side Plates Only - See chart below to select Side Plates & Attachment Kit Küryakyn Quick Release Side Plates are compatible with H-D Detachable Docking Kits if the bike is already so equipped: • P/N K1634 is compatible with H-D Docking Kit 54030-09 • P/N K1636 is compatible with H-D Docking Kit 53803-06 • P/N K1368 is compatible with H-D Docking Kit 53544-04 or 53529-04 • P/Ns K1640, K1641, & K1644 are compatible with Docking Kits 53824-00, 53932-03, 53821-00, 5393003, 53822-00, 53931-03, 53009-03, or 53075-03

K1636

K1606 Transformer Backrest (ea) K1630 Service Kit for Quick Release Side Plates (ea)

T R A N S F O R M E R B A C K R E S T, Q U I C K R E L E A S E S I D E P L A T E S , & A T T A C H M E N T K I T S A R E S O L D S E P A R A T E LY . R E V I E W C H A RT B E L O W C A R E F U L LY & O R D E R B O T H I T E M S L I S T E D F O R Y O U R P A RT I C U L A R A P P L I C A T I O N .

K1606

TOURING MODEL APPLICATIONS

Quick Release Side Plates Patent Pending

’09 and up Electra Glide Standards, Road Glides, Street Glides, & Road Kings

K1634

K1635

’94-’08 Electra Glide Standards, Road Glides, Street Glides, & Road Kings

K1636

K1637

SPORTSTER APPLICATIONS

Quick Release Side Plates Patent Pending

All ’04 and up Sportsters1

SOFTAIL APPLICATIONS QUICK RELEASE SIDE PLATES

Quick Release Attachment Kits Patent Pending

K1638

Quick Release Side Plates Patent Pending

Quick Release Attachment Kits Patent Pending K1639

Quick Release Attachment Kits Patent Pending

’00 and up FLSTC Heritage Classic with Stock Saddlebags

K1644

K1642

’00 and up FLSTC Heritage Classic with H-D Hard Saddlebags (90224-00)

K1640

K1642

’00-’03 FLSTS Heritage Springer with Stock Saddlebags

K1644

K1642

’05 and up FLSTN Deluxe with or without H-D P&A Saddlebags or Hard Saddlebags (90725-00)

K1640

K1642

’05-’07 FLSTSC Springer Classic with or without H-D P&A Saddlebags (except Heritage Bags)

K1640

K1642

’05-'07 FLSTSC Springer Classic with H-D Hard Saddlebags (90224-00 or 90225-00)

K1640

K1642

’05-’07 FLSTSC Springer Classic with Heritage Saddlebags

K1644

K1642

’06 FLST Heritage with or without H-D P&A Saddlebags (except Heritage Bags)

K1640

K1642

’06 FLST Heritage with H-D Hard Saddlebags (90224-00)

K1640

K1642

’06 FLST Heritage with Heritage Saddlebags

K1644

K1642

’00-'05 FXST, FXSTB, FXSTS, '00-'06 FLSTF with or without H-D P&A Saddlebags

K1640

K1642

’00-'05 FXST, FXSTB, FXSTS, ’00-’06 FLSTF with H-D Hard Saddlebags (90225-00, or 90715-00)

K1640

K1642

’06-'10 FXST, FXSTB, FXSTS, FXSTC, & ’07-’08 FXSTSSE with or without H-D P&A Saddlebags2

K1641

K1642

’06-'09 FXST, FXSTB, FXSTS with H-D Hard Saddlebags (90225-00)

K1641

K1642

’07 and up FLSTF, '08-'11 FLSTSB, '10-’12 FLSTFB, '06 FLSTFSE without Saddlebags

K1641

K1642

’07 and up FLSTF, '10-’12 FLSTFB with H-D Hard Saddlebags (90715-00)

K1641

K1642

1. Sportster Models equipped with H-D Hard Saddlebags (91412-0X) must purchase hardware kit 91405-04 from an authorized H-D dealer. 2. ’07-’10 FXSTC requires separate purchase of fender mounted seat.

250

FOLD DOWN LUGGAGE RACK

PREMIER LUGGAGE RACK

U.S. Patent 6,966,471

When you need to strap on a travel bag, just pull down the Folding Luggage Rack. When you don’t, the rack hinges back up against the backrest, conveniently out of the way. Includes everything you need for installation.

The Premier Luggage Rack is no run-of-the-mill flat rack for your motorcycle. This fresh new design is streamlined & three-dimensional. Black rubber inserts contrast the bright chrome finish & also provide a slip resistant surface. With front to back adjustment you can position this rack exactly where you want. Problem is, with a rack this nice, you won’t want to cover it up with luggage!

K1558 Fits: Softail: All ’84-’05 Softails (except Deuce)

& ’06 and up FLST Models (except ’06 FLSTFSE, ’07 and up FLSTF, ’10 and up FLSTFB, ’08-’11 FLSTSB) with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable Side Plates Dyna: ’06 and up Dynas (except ’08 and up FXDF, ’09-’10 FXDFSE, ’10-’12 FXDWG) with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable Side Plates Sportster: ’04 and up Sportsters with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Detachable Side Plates

Fits: All Küryakyn Side Straps & Sissy Bars (except Transformer Backrest P/N K1606) Softail: All ’84 and up Models (except ’00-’07 FXSTD & ’06-’10 FXST, FXSTB & FXSTS & ’07 and up FLSTF, FLSTFB, FLSTSB & FXSTC) with stock or accessory H-D rigid or detachable side plates Dyna: All ’91 and up Models with sissy bar uprights mounted on H-D rigid or detachable side plates Sportster: All ’82 and up Models with sissy bar uprights mounted on H-D rigid or detachable side plates

Note: Not compatible with Küryakyn Sissy Bars found on pg 249.

Universal for aftermarket backrests meeting the following criteria: • Sissy bar to side strap mounting bolts 1/4” – 20 with 1-3/16” to 1-5/16” center to center spacing • Inside width between side straps must be 5-5/8” to 6” or 7-1/4” to 7-1/2” or outside width of side straps must be 5-3/8” to 5-5/8” or 7” to 7-1/4”

K7156 Premier Luggage Rack (ea)

Note: Installation requires a pre-existing backrest with 1/4”-20 mounting bolts with backrest that bolts to side mounting plates for installation.

K4120

K4123

K4118

K4119

PRIMOSHIELD™ FULL & HALF COVERS

SADDLEBAG LID COVERS

Lightweight, compact & water-resistant bike covers offered in full or half sizes. A soft fabric liner protects your windshield & fairing from abrasion. The bottom panels are heat/scorch resistant & includes an elastic hem coupled with reinforced grommets & shock cords to ensure great fit.

Slip on a pair of saddlebag lid covers & little mishaps won’t be a big deal anymore. Soft, matte-finished black vinyl with a felt-like lining helps prevent scuffs, nicks & abrasions, & looks great too!

K4120 K4122 K4121 K4123

Full Cover, Black (ea) Full Cover, Silver (ea) Half Cover, Black (ea)

Fits: ’93 and up Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings With Hard Saddlebags

K4118 Plain (pr) K4119 Zombie (pr)

Half Cover, Silver (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

251

LUGGAGE RACK FOR H-D TOUR-PAK

Whoever said you can’t take it with you obviously never got a good look at this new extra large luggage rack. Measuring 20”x 12”, this deep cradle design handles sleeping bags, tents, jackets or rack bags with ease. Tie down points at each corner make securing your load a snap. Constructed of gleaming chrome tubular steel, it will be a welcome addition to any H-D Tour-Pak! Fits: ’80 and up Electra Glides, Road Glides, Tour Glides, Tri Glides & any other Touring Models that have been equipped with King, Ultra, Chopped or Razor-Pak Tour-Paks

K7139 Luggage Rack (ea) TIE-DOWN POINTS AT EACH CORNER!

LUGGAGE RACK FOR STREET GLIDE , ROAD KING, ROAD GLIDE

& FLHT STANDARD

Now you can have a convenient place to secure your luggage without cluttering up the clean lines of your bike. This sleek, contoured, die-cast rack is beautifully chrome-plated & incorporates raised rubber inserts to protect the surface & keep the load from shifting. The rack has approximately 70 square inches of usable area providing a stable platform for most bags. Installation requires relocation of license plate when used on Road King, Road Glide, or FLHT Standard. This can be accomplished by adding our Curved Fender Tip License Plate Mount (P/N K3164), L.E.D. Lighted Curved License Plate Frame (P/N K9182), Bullet Light Rear Turn Signal Bar (P/N K2098), or the Custom Rear Turn Signal Bar (P/N K2099), sold separately. Fits: ’06-’08 Street Glides, ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides, ’97-’08 FLHT Standard

K7152 Luggage Rack for Street Glide, Road King, Road Glide & FLHT Standard (ea)

CAN BE USED WHEN LICENSE PLATE IS RELOCATED UNDER TAILLIGHT ON ROAD GLIDES, ROAD KINGS & FLHT STANDARDS!

252

TOURING ACCESSORIES UNIVERSAL TRAILER RECEPTACLE KIT

TRAILER HITCH RECEPTACLE

Keep your trailer plug-in tucked under your rear fender for an almost invisible appearance. With included male & female plug components, this 5 pin plug-pin & universal mount kit makes wiring your trailer a snap.

This 5-pin receptacle features a chrome mounting bracket & fits our Hitch (P/N K9181).

K9183 Trailer Hitch Receptacle with Bracket (ea)

Fits: Universal: Mount bracket with 3” drop down arm, both a horizontal top mounting tab & vertical left side mounting tab. (Mounting hardware not included)

K7670 Universal Trailer Receptacle (kit)

TRAILER HITCH BALL COVER This shining chrome trailer hitch ball cover fits all 1-7/8” & 2” balls. Includes a foam lining to ensure a good fit.

K7658 Trailer Hitch Ball Cover (ea)

TRAILER HITCH RACK Bring along a fully loaded cooler or those extra items that just don’t seem to fit in your Tour-Pak. Simply install the mounting plate beneath your trailer hitch ball & this rack attaches or detaches in seconds. Dim: 18” Wide x 12” Long x 1-1/2” Deep, Weight = 6.5lbs Fits: Küryakyn Trailer Hitches (P/N K9181 & K7652) & Universal Applications*

K7643 Trailer Hitch Rack (ea)

Bag Not Included

Note: This product is not intended to be used while pulling a trailer. Suggested weight limit is 35lbs. for appropriate handling & cornering. *Universal mounting under hitch ball requires a fl at/unrestricted area 5” wide x 2-1/2” long & ball stud able to accept a 1/4” thick spacer.

NOW BRING EVERYTHING YOU MIGHT NEED!

TRAILER WIRING HARNESS K7671

New & improved - Safely & effectively apply the load from your trailer lighting to the battery & not to the rest of the bike’s electrical system. • Eliminate blown fuses caused by overloading stock lighting or accessory circuits! Our Relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit. • 5 Wire plus 1: Our kits provide standard 5 wire output (run, brake, left turn, right turn, ground) plus a bonus wire that can be connected as needed to provide fused 12v power to the trailer for compartment lights or keyless entry systems that are wired independently of the trailers essential lighting. • 5 to 4 Wire Converter: Plugs in & allows our Wiring & Relay Kits to power trailers requiring a 4-wire harness (run, left turn/brake, right turn/brake, ground). The bonus wire is still available to provide fused 12v power to the trailer for compartment lights or keyless entry systems that are wired independently of the trailers essential lighting. (includes 4-pin flat vehicle connector)

K7672

Note: Receptacle kits are not included because the style of receptacle used on trailers varies by manufacturer.

K7675

K7671 Universal Trailer Wiring & Relay Harness (ea) K7672 Plug & Play Trailer Wiring & Relay Harness for H-D (ea)

Fits: ’97 and up Electra Glides, ’98 and up Road Glides (except ’09 FLTRSE, ’10 and up FLTRX, ‘12 and up FLTRXSE), ’06-’09 Street Glides, ’97 and up Road Kings, ’96-’10 Softails (except ’08-’10 Rocker, ’10 FLSTSE), ’97-’11 Dynas (except ’10 -’11 FXDWG)

K7675 5 to 4 Wire Converter for Küryakyn Trailer Wiring & Relay Harnesses (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

253

K7652

TRAILER HITCHES A rock solid trailer hitch can make the difference between smooth sailing & a white-knuckle ride. Kits include all mounting hardware & a 1-7/8” ball. FOR ’09 AND UP TOURING MODELS Our permanent mount hitch attaches at six points. Visible parts are bathed in lustrous chrome; hidden components are black powder coated for maximum rust protection

K7652 Fits: All ’09 and up Electra Glides, Road Glides (except ’09 FLTRSE, ‘12 and up FLTRXSE), Street Glides (except ’10 and up FLHXSE), & Road Kings (ea)

K7652

K7659 5-Pin Receptacle Kit for Küryakyn Trailer Hitch (P/N K7652) ’80-’08 TOURING Made of heavy-duty steel with a reinforced hitch plate. Fits with or without saddlebag rails or H-D or Küryakyn Filler Panels. FOR

K9181 Fits: All ’80-’08 Electra Glides, Tour

ANTENNA MOUNT FLAG Secure this American flag to your bike’s antenna quickly & easily. Includes both American flag & a plain, customizable white flag to help you stand out at the next rally. (Flags measure 6” x 8”)

Glides, Road Glides & Road Kings (ea)

Note: Will not fit ‘07 FLHRSE due to wider fender.

K4217 Antenna Mount Flag (ea)

K9181

254

VERTICAL MOUNT FLAGS Pride. Love of Country. Respect. Whatever the reason you choose to display Old Glory or remember our P.O.W.’s, these flags deserve to be displayed with honor & in their best light. Mount straight, securely, & with dignity. 1/2” version fits most luggage racks or any 1/2” tubing including front fender rails. 3/4” version fits saddlebag rails or any 3/4” tubing. American Flag is 6” x 11” & P.O.W. MIA Flag is 6” x 9”.

K4255

K4254 1/2” Vertical Flag Mount (kit) K4255 3/4” Vertical Flag Mount (kit) K4262 Replacement American Flag (ea) K4263 Replacement P.O.W. Flag (ea)

K4254

FLAG POLE FOR LUGGAGE RACK Fly your flag proudly on your luggage rack with the new & improved one piece highly stylized flagpole. It provides more durability & the improved reinforced ratcheting system allows you to adjust the angle of the staff without tools. Includes 4” x 9” American flag.

K4259 Flag Pole for Luggage Rack (ea) Fits: 1/2” Diameter Round Tube

K4271 Canadian Flag, 4” x 9” (ea)

K4264 Replacement American Flag (ea) K4274

Canadian Flag (ea) Don’t Tread On Me Flag (ea) Pirate Flag (ea)

Replacement American Flag (ea) Replacement Crossbones Flag (ea) Replacement P.O.W. Flag (ea)

LICENSE PLATE MOUNTED FLAG K4273

Fits: Küryakyn Flag Mounts, Replacement for 4” x 9” flag used on K4215, K4216, K4233, K4249, K4253, K4259, K4260, & K4261

K4271 K4272 K4273 K4274

Side Mount Flag Kit (ea)

K4271

FOR FLAG HOLDERS

Proudly fly your favorite flag for all to see. As an upgrade or a replacement these flags each measure K4272 4” x 9” & are specifically made for Küryakyn flag mounts. Choose a themed flag or create your own design with the blank flag.

By Fine Art Transformations

Fly your flag without worrying it will fly off your bike. Machined from aluminum, the sturdy mount is easy to install. A single bolt tightens the two clamp halves around the chrome Saddle Bag Guard that comes standard on the FLHTC & FLHTCU. The flag mount is also compatible with Ultra Limted, Road King, Road Glide & FLHT Standard if H-D’s chrome Saddle Bag Guard kit is installed. P.O.W. & Crossbones are 9” x 14” & the American Flag is 9” x 18”. Includes 12” & 18” Staffs, American, P.O.W. & Crossbones Flags.

K4208 K4265 K4266 K4267

Note: Replacement for P/Ns K4260, K4261, K4215, & K4216

THEMED FLAGS

SIDE MOUNT FLAG KIT

Show your American pride! The mount bracket & support plate bolt in behind most license plates quickly & easily. The reinforced ratcheting system allows for easier adjustment & better durability. One-piece flagpole. (4” x 9” American Flag) Fits: Universal application (Ensure motorcycle’s license plate mount is sturdy enough to support force applied by flag speed)

K4261 License Plate Mounted Flag (ea) K4271 Canadian Flag, 4” x 9” (ea)

Replacement for P/Ns K4260, K4261, & K4216

K4264 Replacement American Flag (ea)

Blank Flag (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

255

AIR CLEANERS MACH 2

™

MAKE YOUR MACH 2 YOUR OWN! ™

C US TO M IZE TH E M AC H 2 TO S U IT YOU R PE RSO N A L S T Y LE BY UPGR ADING TO ANY THEMED MEDALLION, BL ACK OR CHROME SPIKES, O R B L AC K M E S H B A S K E T. E AC H M AC H 2 A I R C L E A N E R I N C LU D E S N E C E S S A RY H A R D WA R E T O M A K E T H E C O N V E R S I O N - S I M P LY P I C K YO U R FAVO R I T E D E S I G N TO B U I L D A U N I Q U E O N E- O F- A - K I N D C U S TO M . BLACK MEDALLIONS

K3795 K3796 K3797 K3798 K3799

MEDALLIONS

K3752 Helicopter

Gunship (ea)

K3754 Firefighter (ea) K3764 Deco (ea) K3796

Flame (ea)

K3713 Widow - Black (ea)

Widow (ea)

K3714 Zombie - Black (ea)

Zombie (ea) Chauvinist (ea) Patriot (ea)

K3754

K3714

K3764 K3795

K3752 K3798

K3799

256

K3797

K3713

SPIKES FOR MACH

BLACK MESH

K9558 Black Mesh Basket (ea)

K9556 Black (5 pcs) K9557 Chrome (5 pcs) Black Spikes on Chrome Mach 2

MACH 2™ The best performing, best looking, & best fitting air cleaner on the market today! Not only can the Mach 2 support well over 150hp, it’s look can be customized & individualized to meet the needs of the most demanding riders with everything from themed medallions to mesh inserts & everything in between. Lead the pack & look good doing it!

CHROME

CHROME ZOMBIE™

BLACK & CHROME

ALL BLACK

Complete Mach 2 Air Cleaner Assembly Only

K9451

K9514

K9550

’91-’06 XL Models with CV Carb

K9453

K9533

K9551

’07 and up XL Models

K9871

K9549

K9555

’93-’99 EVO Big Twins with CV Carb

K9454

K9534

K9552

K9455

K9458

K9535

K9553

K9456

K9459

K9536

K9554

’99 and up Twin Cam with CV Carb or Delphi (except ’08 and up Touring/Trikes & ’11 and up FLSTSE) ’08- and up Touring Models, Trikes, & ’11 and up FLSTSE CHROME:

Chrome Case, Chrome Spokes, Chrome Spikes, Chrome Mesh, Both Kuryakyn & Zombie Coins

BLACK

Chrome Case, Chrome Spokes, Chrome Spikes, Chrome Mesh, Both Kuryakyn & Zombie Coins & Large Zombie Medallion

ALL BLACK:

CHROME ZOMBIE:

& CHROME: Black Case, Black Spokes, Chrome Spikes, Chrome Mesh, Both Kuryakyn & Zombie Coins

Black Case, Black Spokes, Black Spikes, Black Mesh, Both Kuryakyn & Zombie Coins

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

257

AIR CLEANERS C H ROM E MAC H 2™

PRO - R HYPERC HARGER™

STREE T SLEEPER® II

ZOM BIE MAC H 2™ ALL BL AC K MAC H 2™

VELOC IR APTOR® CORSAIR™

SKULL

BL AC K & C H ROM E MAC H 2™

HYPERC HARGER™

T WIN VELOC IT Y ™ PLUS

PRO -SERIES HYPERC HARGER™

CORSAIR™ AIR CLEANER We tested many of our competitor’s forward facing air cleaners & found them to be very restrictive. We designed many models until we settled on this very aggressive, free flowing, truly high-performance unit. The chrome-plated die-cast housing with high-flow filter element supplied by Advanced Flow Engineering (aFe) is easy to install & air-flow will support performance engines in excess of 120 H.P.

K9860 ’91-’06 XL Models with CV Carb K9868 ’07 and up XL Models K9861 ’93-’99 Evolution Big Twins with CV Carb & ’99 and up Twin Cams with CV Carb or Delphi Fuel Injection (except ’08 and up Touring/Trikes & ’11 and up FLSTSE)*

K9864 ’08 and up Touring Models*, ’10-’11 Street Glide Trike*, & ’11 and up FLSTSE

K9862 Complete Corsair Air Cleaner Assembly Only

This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

* Not compatible with fairing lowers equipped with glove boxes.

6-1/2”

CORSAIR ACCESSORIES

12-1/2”

258

K9858 K9857 K9859 K88

Replacement Filter Element (ea) Replacement End Cap Kit (kit) Pre-Filter for Corsair (ea) Filter Oil & Cleaning Kit

Note: Installation of this air cleaner may decrease rider leg room. Please reference dimensions above & determine if installation will adversely affect safe & comfortable operation of the motorcycle before making your purchase. This is especially important for riders with shorter legs.

Rendering Shown

C A PA B L E O F S U P P O R T I N G E N G I N E B U I L D S U P T O 14 0 H . P. !

STREET SLEEPER® II Only Küryakyn engineers could figure out how to put the ultra high flowing end breathing Hi-Five element in an air cleaner that hugs so close to the Harley engine.

K9537 ’99 and up Twin Cam with CV Carb or

Delphi (except ’08 and up Touring/Trikes & ’11 and up FLSTSE) (ea)

K9530 ’08 and up Touring Models, Trikes, & ’11 and up FLSTSE (ea)

FEATURES

• Retains the Stock Oval Air Cleaner Cover (Not Included) • Lifetime Küryakyn Designed K&N Element • High Flow Parabolic Curve Entry to Throttle Body • More Leg Clearance for Enhanced Comfort

OUR BEST FLOWING ELEMENT FIT INTO A NEW SLIMMER DESIGN AIR CLEANER!

VELOCIRAPTOR® AIR CLEANER With a race inspired design & show bike styling this air cleaner will give your bike a look like no other can! Unlike most velocity stacks on the market the Velociraptor breaths well & filters the air with its K&N washable element. The Super Ring insert covers up the mounting bolts delivering smooth airflow into your motor.

K9510 K9872 K9511 K9512

Fits: ’98-’06 XL Fits: ’07 and up XL Fits: ’93-’99 Evolution ’99 and up Twin Cam with CV Carb or Delphi (except ’08 and up Touring/ Trikes & ’11 and up FLSTSE)

K9513 ’08 and up Touring Models, Trikes, & ‘11 and up FLSTSE

K9870 Air Cleaner Only

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

259

C A PA B L E O F S U P P O R T I N G E N G I N E B U I L D S T H AT P R O D U C E U P T O 14 0 + H . P.

PRO-R HYPERCHARGER™ U.S. Patent 5,307,771

The Hypercharger has continued to evolve to meet the needs of the performance minded rider. Taking what we’ve learned from Mike Roland’s testing & development of our Wild Things Performance® Products & the combined efforts of our talented design staff, this is without a doubt the best flowing Hypercharger we have ever produced. There are no sacrifices with the Pro-R Hypercharger, the frontal opening is huge & the vacuum operated butterflies allow for almost unrestricted airflow to the filter under high-load riding situations. In addition the outer cover features an incorporated scoop to direct air into a high-flow, washable foam filter element paired to one of the best flowing K&N filter elements on the market. And thanks to the carefully designed interior shapes, air flow is smooth & precise, delivering maximum power. Complete with mounting hardware & crankcase breather kits.

K9320 ’91-’06 XL Models with CV Carb K9328 ’07 and up XL Models K9321 ’93-’99 Evolution Big Twins with CV Carb K9323 ’01-’05 Twin Cam with Dephi Fuel Injection K9322 ’99-’06 Twin Cam with CV Carb & ’06 and up Twin Cam with Delphi Fuel Injection (except ’08 and up Touring/ Trikes & ’11 and up FLSTSE)

K9325 ’08 and up Touring Models, Trikes, & ’11 and up FLSTSE K9324 Pro-R Air Cleaner Assembly Only

This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit. Note: Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See pg 265 for complete adapter listings. Note: Leg room is diminished compared to stock air cleaner, particularly on ’08 and up Touring Models & Trikes.

C A PA B L E O F S U P P O R T I N G E N G I N E B U I L D S T H AT P R O D U C E U P T O 12 0 H . P.

PRO-SERIES HYPERCHARGER™

U.S. Patent 5,307,771

The body is 1/2” wider than a standard Hypercharger. “Pro” embossed bearing cups give this performance weapon a look that screams horsepower! Fits stock or 44mm CV style carbs & can be easily adapted to Mikuni HSR42/45/48 & S&S Shortys (Adapters for other carb applications pg 266). Pro-Series Hyperchargers come complete with mounting hardware & crankcase breather kits. CHROME BODY WITH CHROME BUTTERFLIES

K9300 ’91-’06 XL with CV Carb K9327 ’07 and up XL Models K9301 ’93-’99 Evolution Big Twin with CV Carb K9308 ’95-’98 Evolution Big Twin with EFI* K9307 ’99-’01 Twin Cam Touring with EFI* K9311 ’01-’05 Twin Cam with Delphi EFI K9302 ’99-’06 Twin Cam with CV Carb, ’06 and up Twin Cam with Delphi EFI (except ’08 and up Touring/Trikes & ’11 and up FLSTSE)

K9315 ’08 and up Touring Models, Trikes, & ’11 and up FLSTSE K9306 Pro Series Hypercharger Only (late inlet)

This air cleaner can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit. *Requires drilling a hole in manifold to supply a vacuum source. REPLACEMENT COMPONENTS FOR PRO - R

& PRO -SERIES HYPERCHARGERS

K9493 Replacement K&N Filter (ea) K8554 Vacuum Pod Rebuild Kit (ea) K9319 Replacement Cage/Foam Filter Assembly (ea) K9330 Chrome Butterflies(pr)

260

CHROME BODY WITH BLACK BUTTERFLIES

K9303 K9304 K9312 K9305

’91-’06 XL with CV Carb ’93-’99 Evolution Big Twin with CV Carb ’01-’05 Twin Cam with Delphi EFI ’99-’06 Twin Cam with CV Carb, ’06 and up Twin Cam with Delphi EFI (except ’08 and up Touring/Trikes & ’11 and up FLSTSE)

K9316 ’08 and up Touring Models, Trikes, & ’11 and up FLSTSE Note: Leg room is diminished compared to stock air cleaner, particularly on ’08-’11 Touring Models & Trikes. K9331 Black Butterflies (pr) K9332 Pro-Series Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring (set)

K9333 Pro-R Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring (set)

K9334 Case Screws for Pro-Series & Pro-R (set/3)

BLOOD GROOVE HYPERCHARGER™

U.S. Patent 5,307,771

Küryakyn offers a select number of complete Hypercharger Kits assembled with a Blood Groove Trap Door. The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive performance no matter which style you choose. Complete kits are listed for most popular applications. Wrinkle Black Body

Chrome Body Chrome Blood Groove Trap Door Chrome Butterflies

Chrome Body Chrome Blood Groove Trap Door Black Butterflies

Black Body Black Blood Groove Trap Door (lettered) Black Butterflies

Wrinkle Black Blood Groove Trap Door Chrome Butterflies

K9982

’93-’99 Evo Big Twin with Stock Carb, Includes Küryakyn Crankcase Breather

K9990

K9991

K9988

K9981

’93-’99 Evo Big Twin with Stock Carb, for use with Screamin’ Eagle Crankcase Breather

K9986

’93-’99 Evo Big Twin with S&S E or G, Includes Küryakyn Crankcase Breather

K9985

’95-’98 Evo Big Twin with EFI*, Includes Küryakyn Crankcase Breather

K9984

K9983

K9998

K9993

K9994

K9979

K9992

K9997

K9987

K9980

K9970

K9972

K9971

K9973

K9995

K9996

K9989

K9999

K9873

K9874

Complete Hypercharger assembly with Blood Groove Trap Door to be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit (late inlet). EVO BIG TWIN

TWIN CAM

’99-’01 Twin Cam Road King or Dresser with EFI*, Includes Küryakyn Crankcase Breather ’01-’05 Twin Cam with Delphi EFI, Includes Küryakyn Crankcase Breather ’99-’06 Twin Cam with Stock Carb & ’06 and up Twin Cam with Delphi EFI (except ’08 and up Touring/Trikes & ’11 and up FLSTSE) - Includes Küryakyn Crankcase Breather ’08 and up Touring/Trikes & ’11 and up FLSTSE Includes Küryakyn Crankcase Breather SPORTSTER

’91-’06 Sportster Models with Stock Carb, Includes Küryakyn Crankcase Breather ’91-’06 Sportster Models with Stock Carb & Screamin’ Eagle or other Crankcase Breather Kits ’07 and up Sportster Models *Requires drilling a hole in manifold for vacuum supply.

PRO-SERIES UPGRADE KIT

STINGER TRAP DOOR

Available for anyone currently using a new style (replaceable bearing cup style) Standard Hypercharger. The kit consists of the new “Pro” large volume outer case half with bearing cups, butterflies, larger K&N air filter element, & necessary hardware.

Designed specifically to maximize airflow into the carburetor or throttle body, the Stinger’s two large raised scoops channel air through a high-flow foam filter element. This is an incredibly cost effective way to increase air flow in any standard Hypercharger. Easy four bolt replacement of any standard trap door. Sit down, shut-up, & hang on!

FOR HYPERCHARGER

K8498

K9310 Pro Series

Hypercharger Upgrade (Available in Chrome Only)

K9310

Fits: Standard Hypercharger only

K8498 Stinger Trap Door with Filter (ea) K8492 Replacement Filter Element (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

261

STANDARD HYPERCHARGER™ U.S. Patent 5,307,771

• Outstanding performance on stock or mildly modified engines up to 90 H.P. With the addition of the Stinger Trap Door (P/N K8498 - pg 261), we have tested & proven the Hypercharger to support engines up to at least 130 H.P. • Stock or touring applications where added performance is desired, but not paramount. Comfort & driver leg-room is a major factor. • Custom applications where matching or contrasting color trap door & butterflies are used as a styling accent. FO R K I T S L I S T E D I N T H E TO P S EC T I O N O F T H E C H A RT, T H E R E I S N O N E E D TO P U RC H A S E A N Y A D D I T I O N A L C O M P O N E N T S FO R T H E S E A P P L I C AT I O N S . T H E S E C O N D S E C T I O N O F T H E C H A RT O U T L I N E S M A N Y C O M M O N A P P L I C AT I O N S W H E R E I T I S N E C E S S A RY T O S TA R T W I T H A C O M P L E T E K I T & T H E N S I M P LY A D D AN ADAP TER OR MOU NTI NG K IT TO COM PLE TE TH E PAC K AG E .

TRAP DOOR & BUTTERFLY COLOR CHOICES (COMPLETE KITS) BLACK

Pre-Evo Big Twin with stock carb4 or S&S B Series5 (early inlet) ’88-’90 XL with stock carb (late inlet) ’91-’06 XL with stock carb-Includes Küryakyn breather (late inlet) ’91-’06 XL with stock carb-For use with H-D breather1 (late inlet) ’07 and up XL Includes Küryakyn breather (late inlet) ’84-’89 Big Twin with stock carb or S&S B Series5 (early inlet) ’90-’91 Big Twin with stock carb (late inlet) ’92 Big Twin with stock carb (late inlet) ’93-’99 Evo Big Twin with stock carb Includes Küryakyn breather (late inlet) ’93-’99 Evo Big Twin3 with stock carb-For use with Screamin’ Eagle breather2 (late inlet) ’95-’98 Evo Road King or Dresser with E.F.I.4 (Marelli inlet) ’99-’01 Twin Cam Road King or Dresser with E.F.I.4 (Marelli inlet) 3

’01-’05 Twin Cam with Delphi E.F.I. (late inlet) ’99-’06 Twin Cam w/CV carb & ’06 and up Twin Cam with Delphi E.F.I. (except ’08 and upTouring Models/Trikes & ’11 and up FLSTSE) ’08 and up Touring Models/Trikes & ’11 and up FLSTSE (late inlet)

K8361

K8376 K9326

K8496 K8501

K8493 K8504

K8505 K8462

K8506 K8464

K8456

K8459

K9765

K9767

Color Chrome 24K Gold Black Candy Red Candy Blue Nugget Yellow

Victory Red Lazer Red Sinister Blue Raw

K8482 K8477 K8488 K8489 K8490

262

ALL CHROME

K8488 K8489* K8484 K8485 K8486 N/A N/A K8427 N/A N/A N/A N/A K8490*

Raw Trap Door Chrome Butterflies (pr) Gold Butterflies (pr)

BLOOD GROOVE TRAP DOORS

K9707 K8367

BLACK

K8482* N/A K8478 K8479 K8480 K8420 K8424 K8426 K8428 K8430 K8432 K8434 K8477*

Raw Butterflies (pr) Note: Trap Doors & Butterfl ies are not for use on Pro-Series Hyperchargers.

’93-’99 Evo Big Twin3 with S&S, E or G (late inlet) K9687 ’93-’99 Evo Big Twin3 with HSR 42 Mikuni (late inlet) Footnote: 1. H-D Breather for XL Refers to Drag Specialties P/N 2110-0316 (Replica of H-D P/N 29281-91T). 2. Screamin’ Eagle Breather for EVO BT Refers to Harley Davidson P/N 29310-93. 3. Includes FXR2, FXR3 & FXR4. 4. Requires drilling hole in intake to provide vacuum for butterfly operation. 5. Requires drilling hole in Hypercharger back (& mounting bracket where applicable) for float bowl vent. Each application lists “early inlet”, “late inlet”, or “Marelli Inlet” in parenthesis. An early inlet air cleaner will bolt directly to a Keihin Butterfly, Bendix, or Zenith carburetor. A late inlet air cleaner will bolt directly to Harley’s 40mm or 44mm Keihin CV carburetor as well as the Delphi E.F.I. system found on ’01 Softails & all ’02 and up Twin Cams with E.F.I. (except ’08 and up Touring). A Marelli inlet air cleaner will bolt to the Magneti Marelli E.F.I. system found on ’95-’01 Touring Models. THE FOLLOWING APPLICATIONS REQUIRE BASIC KIT PLUS ADAPTER OR MOUNT KITS

Butterflies

Chrome Trap Door

HIGH PERFORMANCE CARBURETORS

’91-’06 XL with HSR 42 Mikuni (late inlet)

Trap Doors

*Special pricing shown below.

K9774 K9763 K9754

All Colored Butterflies (pr)

Violet Pearl

K9734 K9759 K9751

All Colored Trap Doors

Metallic Gray

K8453 K8359 K8469

Create a new look in minutes!

Mystique Green

CHROME

K8356 K8467

STANDARD & LETTERED TRAP DOORS & BUTTERFLIES

MIKUNI HSR S&S E OR G 42/45/4 8

Pre-Evo Big Twin & XL using high perf carbs like S&S E or G, Mikuni, Screamin’ Eagle, Rev Tech (late inlet)

K8448

K8446

’84-’91 Evo Big Twin using high perf carbs like S&S E or G, Mikuni, Screamin’ Eagle, Rev Tech (late inlet)

K8501

K8504

’92 Big Twin using high perf carbs like S&S E or G or Mikuni, HSR 42/45/48 (late inlet)

K8505

K8506

’99-’06 Twin Cam using S&S E or G (late inlet)

K8448

K8446

’99-’06 Twin Cam using Mikuni HSR 42/45/48 (late inlet)

K9751

K9754

K8553

’86-’90 XL using high perf carbs (late inlet)

K8356

K8359

K8553

K8525 & K8519 K8525 & K8519

K8553

K8525 & K8519 K9793

K8553

A quick & classy alternative to the standard Trap Door. Five minutes & you have a whole new look.

K8475 Black (ea) K8476 Chrome (ea)

C. BREATHER BOLT COVERS

FOR TWIN CAM

Simply press-on & tighten the set screw. Fits: All ’99 and up Twin Cams with Küryakyn Air Cleaners & Crankcase Breather Kits & ’07 and up Sportsters with Küryakyn Air Cleaners

K7791 Breather Bolt

Covers for Twin Cam (pr)

SKULL AIR CLEANER Not for the faint of heart! Cover is made of highstrength, rigid composite. Includes a backing plate & high-flow K&N filter element as well as any necessary brackets, crankcase breathers or hardware required for a quick & easy installation. Note: Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See pg 266 for complete adapter listings.

K9941 ’91-’06 XL Models with CV Carb K9869 ’07 and up XL Models K9944 ’99 and up Twin Cams with CV Carb or Delphi Fuel Injection (except ’08 and up Touring/Trikes & ’11 and up FLSTSE)

K9946 ’08 and up Touring Models/Trikes & ’11 and up FLSTSE K9945 Complete Skull Air Cleaner Assembly Only

This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

K9947 Black Chrome Skull Air Cleaner Kit

Fits: ’99 and up Twin Cams w/CV Carb or Delphi Fuel Injection (except ’08 and up Touring/Trikes & ’11 and up FLSTSE)

K9948 Black Chrome Skull Air Cleaner Kit Fits: ’08 and up Touring Models/ Trikes & ’11 and up FLSTSE

K9469 Replacement Filter Element (ea)

TWIN VELOCITY™ PLUS • Slots on both sides & openings at the bottom to allow air to enter the sides of the K&N filter. End Breather Technology - A large, foam filter element beneath the teardrop center cover to allow filtered air to enter the end of the filter. • Internal crankcase vent system direct gasses & oil droplets into carbs or induction module. - CHROME

TWIN VELOCITY PLUS

K9831 ’93-’99 Evo Big Twin with Stock Carb (ea) K9832 ’99 and up Twin Cam with Stock Carb or Delphi Fuel Injection (except ’08 and up Touring/Trikes & ’11 and up FLSTSE) (ea)

K8492 Replacement Cage/Foam Filter Assembly (ea) K9790 Replacement K&N Filter Element (ea)

THROTTLE BODY COVER This throttle body cover mounts behind the air cleaner for a clean & simple chrome look. Available for most air cleaners.

K7246 Fits with Kuryakyn Hypercharger, Pro-Series Hypercharger, or Pro-R Hypercharger on ’01 and up EFI Softail Models, ’02-’07 EFI Touring Models, or ’04 and up EFI Dyna Models (ea)

K7247 Fits with All Kuryakyn Air Cleaners (except Hyperchargers & Twin

Velocity/Plus), Ness Big Sucker I & II, & Screamin’ Eagle Stage 1 & Heavy Breather on ’01 and up EFI Softail Models, ’02-’07 EFI Touring Models, or ’04 and up EFI Dyna Models (ea)

A A

B. THROTTLE SERVO MOTOR COVER Great looking remedy to disguise the throttle servo motor.

C B

A. THROTTLE

BODY SUPPORT BRACKET COVER

Beautifies the stock support bracket.

Fits: ’08 and up Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes Fits: ’08 and up Electra Glides, Road Glides, Street Glides, K8657 For use with H-D Road Kings & Trikes with Screamin’ Eagle Stage Küryakyn Air Cleaners One or Heavy Breather Air Cleaner (ea)

K8659 For use with all Küryakyn Air Cleaners (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

K8658 Throttle Body

Support Bracket Cover (ea)

263

AIR CLEANER COVERS CLASSIC STYLE MEETS MODERN INNOVATION

ALLEY CAT Made to fit the Kuryakyn Street Sleeper II as well as many other aftermarket high flow air cleaners, this cover features a unique chrome mesh insert & “knock off” styled end cap for that retro look on your modern motorcycle. Fits: Screamin’ Eagle Stage 1 Air Cleaner kits for ’99 and up Touring, ’00 and up Softail, ’99-’07 Dyna; Kuryakyn Street Sleeper II, & all Arlen Ness Stage 1 Big Sucker Kits.

K9439 Alley Cat Air Cleaner Cover (ea) Note: Does not work with Ness Stage II Big Sucker or the original Kuryakyn Street Sleeper.

Rendering Shown

SCARAB™ AIR CLEANER COVERS

SKULL AIR CLEANER COVER

The Scarab Air Cleaner Cover adds a custom touch with racy contours & chrome grilled openings for additional air flow.

FOR S& S

K8407 Scarab Air Cleaner Cover without Notch (ea)

Fits: ’02 and up Electra Glides, Road Glides, Street Glides, Road Kings & Trikes (except Carbureted California Models), ’01 and up Softail Models (except ’08-’11 FLSTSB, ‘11 and up FXS & Carbureted California Models), & ’04-’07 EFI Dyna Models

K8408 Scarab Air Cleaner Cover with Notch (ea)

Fits: All ’99-’03 Dyna Models, ’04-’05 California FXD & FXDX, ’99-’06 Carbureted California Electra Glides, Road Glides, & Road Kings, ’02-’05 California FLHTI, ’00-’06 Carbureted California Softails

Dirty, mean, & nasty...this replacement cover for S&S E or G series air cleaners will send chills down your spine! Constructed of a high-strength, extremely rigid composite material ready to install. Fits: Replaces Tear Drop Cover on S&S E or G Air Cleaner assemblies

K9940 Chrome (ea) K9939 Hot Rod Black (ea) K9938 Black Chrome (ea)

K9938

K8407 K8407

K9939

K9940

BLUEGRASS BREATHER KITS

K9930

Many Harleys puke oil out the breather & down the side of the bikes. The Blue Grass Breather can cure that. The banjo fittings & chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine. The vent line can be run up & out or the optional catch tank is available for those who would rather vent to a closed container.

K9931

K9930 Bluegrass Breather Kit, Long Leg (ea) K9930

K9932

Fits: ’93-’99 Evo Big Twin with Mikuni HSR series carb, ’91-’06 Sportster Models

K9932 Bluegrass Breather Kit, Short Leg (ea)

Fits: ’93-’99 Evo Big Twin (most carbs except Mikuni HSR) ’99 and up Twin Cam with Delphi EFI (except ’08 and up Touring, Trikes & ‘11 and up FLSTSE) & most carbs

3”

264

2-1/4”

K9931 Catch Tank (ea)

SUPPORT BR ACKET DIMENSIONS

K9929

CARBURETOR SUPPORT BRACKETS P/N

MODEL #

FITMENT

CARB INLET

HEAD ATTACHMENT BOLT SIZE

DOES BRACKET USE REDUCTION WASHERS?

Late

1/2”

Yes

5-3/16”

1-3/16”

1-1/8”

Late

5/16”

Yes

5-15/16”

1-7/16”

1-5/16”

DIMENSIONS (Above) A B C

E VO LU T I O N S P O R TS T E R MO D E LS

K8349

XL-6

’88-’06 with CV Mikuni, Rev Tech, S.E.

E VO LU T I O N B I G T W I N MO D E LS

K8344

MB 2

’90-’91 with CV ’84-’91 with Mikuni, Rev Tech, S.E. ’92-’99 with CV, Mikuni, S.E.

Late

1/2”

5-15/16”

1-3/8”

1-5/16”

MB 3

’84-’89 with 38mm Butterfly S&S B

Early

5/16”

Yes

5-15/16”

1-7/16”

1-5/16”

MB 9

’84-’99 with S&S E or G

Late

5/16” or 1/2”

Yes

5-15/16”

2-1/16”

1-5/16”

MF 1

’95-’98 BT with Fuel Injection

F.I. Oval

1/2”

5-15/16”

1-1/4”

2-1/2”

K8332

’99-’06 with CV or HSR42/45/48 ’01 and up with Delphi EFI (except ’08 and up Touring, Trikes & ‘11 and up FLSTSE)

Late

1/2”

5-15/16”

1-3/8”

1-5/16”

K8374

’01 and up with Wild Things Throttle Body

Late

1/2”

5-15/16”

1-3/8”

1-5/16”

K8332 K8346 K8587 K8591

TWIN CAM

K8327

MF5

’99-’01 Dressers & Road Kings with Magneti-Marelli EFI

F.I. Oval

3/8”

5-15/16”

1-1/4”

2-1/2”

K8326 K9929

TC9

’99-’06 with S&S E or G

Late

3/8”

5-15/16”

2-1/16”

1-5/16”

Chrome Replacement for H-D 2771208. ‘08 and up Touring & Trike & Custom Applications on ‘08 and up CVO Touring & ‘11 and up CVO Softail

N/A

3/8”

K8553

COMPLETE MOUNTING KITS FOR KÜRYAKYN AIR CLEANERS These mounting kits include everything necessary to install a Hypercharger, Pro-Hyper or Pro-R.

K8333 K8338 K8341 K8339 K9329 K8335 K8336 K8337 K8340 K8342

Pre Evo Big Twin or XL with Stock Carb ’88-’90 XL with Stock Carb ’91-’06 XL with Stock Carb, includes Küryakyn Crankcase Breather ’91-’06 XL with Stock Carb, for use with H-D Crankcase Breather ’07-’12 XL ’84-’89 Evo Big Twin with Stock Carb or S&S B ’90-’91 Evo Big Twin with Stock Carb ’92 Evo Big Twin with Stock Carb ’93-’99 Evo Big Twin with Stock Carb, includes Küryakyn Crankcase Breather ’93-’99 Evo Big Twin with Stock Carb, for use with Screamin’ Eagle Crankcase Breather

K9919 ’99-’06 Twin Cam with Stock Carb includes Küryakyn Crankcase Breather

K9924 ’01-’05 Twin Cam with Delphi EFI, includes Küryakyn Crankcase Breather

K9926 ’06 and up Twin Cam with Delphi EFI (except ’08 and up Touring,

K8535 K8525 K8519

CARBURETOR ADAPTERS K8519 Enrichener for S&S E or G K8525* S&S E or G K8535* Wide S&S E or G, for use with Screamin’ Eagle breather on ’93-’99 BT & ’91-’03 XL

K8524 Mikuni 38mm roundslide K8553 Mikuni HSR42/45/48 K8511 S&S Adapter for Twin Velocity Air Cleaner Fits: Evolution Big Twin

Note: You must also order P/N K8519 (sold separately). *These adapters require the purchase of longer breather bolts when used with Küryakyn Crankcase Breather Kits for EVO.

Trikes & ‘11 and up FLSTSE), includes Küryakyn Crankcase Breather

K9793 ’99-’06 Twin Cam with S&S E or G, includes Küryakyn Crankcase Breather

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

265

REPLACEMENT COMPONENTS

FOR NEW STYLE HYPERCHARGER™

I B

K9906 Case Bolts &

K9904 Trap Door Screw/

K9903 Trap Door Gasket K9913 Butterfly Shaft

Washer Set (8 pcs)

K E

Caps w/Screws, Washers, Bearings, Shim & Spring

J D

Washer Set (6 pcs)

K8513 K&N Filter Element K9911 Chrome Back Half

K9912 Chrome Back Half

K8580 Vacuum Pod

K8581 Diaphragm Only K8599 Butterfly Shaft K9905 Butterfly Screw Set

K9910 Chrome Front Half

- Early Inlet - Late Inlet

Rebuild Kit

(4 pcs)

G D

A. CHROME CRANKCASE BREATHER

U.S. Patent D488,104

Keep oil from being ejected into your air cleaner. Excess oil now runs back down into the engine rather than back into the air cleaner to be blown all over your bike.

K9917 Fits: ’93-’99 Evolution Big Twin Models w/ CV Carb

K9918 Fits: ’99-’06 Twin Cam Models w/CV Carb

B. REMOTE CRANKCASE

BREATHER FILTER Universal fitment

K8515 Remote Crankcase Breather Filter

C. CRANKCASE BREATHER KIT FOR TWIN CAM Included with our Hypercharger Kits for Twin Cam Models, this breather kit installs between the air cleaner & the carb support bracket. The stock breather bolts & vent hoses are reused.

K9920 Crankcase Breather Kit

for ’99 and up Twin Cam (except ’08 and up Touring, Trikes & ‘11 and up FLSTSE)

K9928 ’07-’11 XL

266

D. AIR CLEANER SPACERS

G. CARB INLET GASKETS

Make more room between your air cleaner & the engine or fuel tank. Compatible with any CV bolt pattern air cleaner.

K9902 Late Inlet: 40mm Keihin

K8510 7/8” CV Bolt Pattern Spacer K8512 5/8” CV Bolt Pattern Spacer K8564 1/4” CV Bolt Pattern Spacer

E. REPLACEMENT COMPONENTS FOR CRANKCASE BREATHER KIT FOR EVO

K9900 Rplcmt Rubber Boots (pr) K8999 Rplcmt Boots & Hoses (set) K2000 Rplcmt 1” Breather Bolts (pr)

K2002 Rplcmt 1-3/4” Breather

CV, 44mm Keihin CV, Delphi EFI (except ’08-’11 Touring & Trikes)

K9901 Early Inlet: 38mm Keihin Butterfly, Bendix, Zenith, Tillotson

H. K&N FILTER CARE KIT

Your bike will run better & your engine will last longer. All Küryakyn air cleaners use K&N filters. With proper maintenance, these filters will last many years.

K85 K&N Filter Care Kit

Bolts (pr)

F. BREATHER COMPONENTS

I. THE TURBULATOR

FOR TWIN CAM

Install in the intake manifold to help keep the fuel droplets in suspension & assure a complete mix of gas & air.

K9975 Stock Length (3/8”-16 x 1-1/4”) Twin Cam Breather Bolt (pr)

K9976 1/2” longer (3/8”-16 x 1-3/4”) Twin Cam Breather Bolt (pr)

K9927 1/2”-13 x 1” T.C. Style Breather Bolts for XL (pr)

K9977 Formed Breather Hoses (pr)

K8761 Turbulator for 2 Bolt -

1-7/8” & 48mm Manifolds (S&S B, Shorty E)

EXHAUST

B E A S T O VA L S

™

Mad Stax

MAD STAX HAS REVERSIBLE TIPS FOR TWO DISTINCT LOOKS!

BEAST OVAL™ MUFFLERS

Streamliner

Beast Oval Mufflers maximize the horsepower potential of your bike while providing a mellow, deep tone. Beast Ovals make great sound without waking the neighbors or drowning out your bike’s stereo. Large volume & innovative baffle design lay waste to the theory that loud pipes make more power. Bluing or discoloration won’t be a problem - these new mufflers are shrouded with formed heat shields. Two tip styles available. Fits: ’95 and up Electra Glides, Road Glides (except ’09 FLTRSE & ‘12 and up FLTRXSE), Street Glides (except ’10 and up FLHXSE), Tour Glides, & Road Kings

K479 Mad Stax Tip (pr) K465 Streamliner Tip (pr) K479

K465 K479

Note: Installation on ’10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual Head Pipes.

TORQUE CONES Straight pipes sound sweet, but for street use they’re a performance disaster! Here’s an inexpensive way to get back some of that lost horsepower & gas mileage without affecting the sound.

K9155

COM BINING AIR CLEANERS, ENGINE MANAGEM ENT, & EXHAUST FOR THE ULTIMATE IN SOUND, PERFORMANCE & LOOKS! - PG 272

K9155 Fits: Most 1-3/4” O.D. Twin Cam, Evolution Big Twin & XL exhaust systems (pr)

WILD THINGS® COMETIC® EXHAUST PORT GASKETS Mesh-type gaskets are notorious for obstructing the exhaust port. Don’t let a cheap gasket rob you of hard earned horsepower!

K482 Fits: All Evo & Twin Cam Engines (pr)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

K482

267

CRUSHER MUFFLERS EXPERIENCE THE DIFFERENCE! DIFFEREN N CE! Th C The Crusher h name hhas b become synonymous with i h performance. f Performance throughout the RPM range! Looks to die for & quality only Küryakyn can bring you. Acoustically tuned for that deep low rumble you’ll love, they provide lower decibel levels at cruising speeds & an authoritative growl at wide open throttle. High-tech stainless steel packing provides added longevity!

K498 Crusher Mufflers with Slip Stream Tips (pr)

Fits: ’95-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & all ’09 and up Models with Short Shocks & all Trikes

K499 Crusher Mufflers with Trident Tips (pr)

Fits: ’95-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & all ’09 and up Models with Short Shocks & all Trikes

Trident Tips

K490 Crusher Mufflers with Slip Stream Tips (pr)

Fits: ’09 and up Electra Glides, Road Glides, Street Glides, & Road Kings*

K491 Crusher Mufflers with Trident Tips (pr)

Fits: ’09 and up Electra Glides, Road Glides, Street Glides, & Road Kings* *Installation on ’10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual Head Pipes. HEAT SHIELDS

& REPLACEMENT TIPS

K495 Heat Shields for Crusher Mufflers (pr) K492 Replacement Trident Tip (ea) K493 Replacement Slip Stream Tip (ea)

Slip Stream Tips

C RU S H E R E X H AU S T: P E R FO R M , S O U N D & LOOK BETTER THAN THE LEADING BR ANDS Mike Roland & Küryakyn’s industry leading design team engineered the Crushers for maximum performance, a throaty sound, & knock-out looks! Crusher Mufflers provide a low deep rumble with no swishing, tweeting or tinny noises while delivering power that’ll pull your arms off! Equipped with your choice of tips or choose to add our awesome Beast Ovals. No matter which style you choose, Küryakyn exhaust will put you at the front of the pack!

Trident Tips

Note: Küryakyn makes no warranty regarding discoloration of chrome exhaust products. Discoloration is a result of heat & is not a manufacturing defect.

268

MELLOW CRUSHER MUFFLERS

ALL THE POWER WITHOUT ALL THE NOISE!

Crusher Mellow Mufflers have the same great performance & looks as our original Crusher Mufflers but without the renowned bark at high throttle openings. They retain a deep mellow tone at cruise & even during spirited riding. What more could you want? For an even mellower sound with crushing performance - Combine with our Crusher Duals with Power Cells (P/N K488 or K588 - pg 270)

K504 Mellow Crusher Mufflers with Slip Stream Tips (pr)

Fits: ’95 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

K505 Mellow Crusher Mufflers with Trident Tips (pr)

Fits: ’95 and up Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

QUIET BAFFLES

T R A N S FO R M YO U R C RU S H E R M U F F L E RS I N TO C RU S H E R M E L LO W M U F F L E RS !

Designed to retro-fit your Crusher Mufflers so you can retain your performance & mellow your sound!

K503

Fits: Küryakyn Crusher Mufflers Only (P/N K490 & P/N K491) (pr)

W H AT ’ S I N S I D E M AT T E R S B U I LT FO R LO N G L A ST I N G P E R FO R M A N C E , T H E C RU S H E R M U F F L E RS F E AT U R E F R E E F LO W I N G P E R FO R AT E D B A F F L E S W R A P P E D I N H I G H Q U A L I T Y STA I N L E S S ST E E L PA C K I N G FO R A N I N C R E D I B L E S O U N D A N D O U TSTA N D I N G P E R FO R M A N C E . N O C H E A P F I B E RG L A S S TO B U R N U P O R W E A R O U T, S I M P LY T H E B E ST M AT E R I A L S E N G I N E E R E D TO T H E H I G H E ST STA N D A R DS .

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

269

CRUSHER DUALS WITH POWER CELL ’09 AND UP TOURING MODELS Küryakyn’s Crusher Duals with Power Cell integrate a unique crossover for increased horsepower & torque. The Power Cell is hidden by a hot looking, stylized heat shield. Much like the stock ‘09 - later design, the left pipe runs beneath the motorcycle, well away from the passenger’s feet & legs. Crusher Duals with Power Cell include heat shields & mounting hardware. All that’s left to do is choose the mufflers to complete your highperformance package – Crushers or Beast Ovals! FOR

K488 Fits: All ’09 Electra Glides, Road Glides, Street Glides, & Road Kings

K588 Fits: All ’10 and up Electra Glides, Road Glides, Street Glides, & Road Kings Note: ’10 FLHX & FLTRX require Left Side Muffler Mount Kit (P/N K560).

NOTE FOR CRUSHER DUALS

& TRUE DUALS

For optimum performance Küryakyn recommends adding one of our high-flow Air Cleaners & a fuel injection tuning device - The MasterTune Kit from TTS (pg 273). Küryakyn makes no warranty regarding discoloration of chrome exhaust products. Discoloration is a result of heat & is not a manufacturing defect.

LEFT SIDE OF POWER CELL & TRUE DUALS FOR ’09 AND UP

K560 Muffler Support Bracket & Rubber Grommet (ea) Fits: ’95 and up Touring Models (Mounts 1 muffler)

K561 Trike Exhaust Adapter Kit (pr)

Note: Required to install P/N K488 or P/N K588 on ’09 and up Tri Glide & Street Glide Trikes.

DON ’ T FO RG E T TO REPL AC E YOU R E XH UAST PORT GASKE TS - PG 267

CHROME POWER CELL COVER FOR KÜRYAKYN CRUSHER POWER CELL EXHAUST

If you already have a Crusher Power Cell Exhaust System, but you’re yearning for more chrome, here’s a fully chromed replacement cover! Fits: Küryakyn Part Numbers; K488, K507, K508, K514, & K588 Crusher Power Cell Exhaust

K515 Chrome Power Cell Cover (ea)

K507

K514

K507

CRUSHER POWER CELL STAGGERED DUALS FOR SOFTAIL & DYNA Most of the staggered style exhausts on the market perform very poorly. The Crusher Power Cell Staggered Duals have a crossed flow cell that makes this pipe perform like a 2 into 1 but look like a unique staggered dual with an awesome deep sound.

K507 All Chrome - Fits: ‘86-’11 Softail K508 Black & Chrome - Fits: ‘86-’11 Softail

• Tuned Performance & Deep Powerful Sound

K514 Black & Chrome - Fits: ‘06-’11 Dyna K509 18mm Sensor Bung Plugs (pr)

• Full Heat Shields from End to End

Note: ’86-’06 Models require Sensor Bung Plugs (P/N K509).

270

• Stunning Looks You’d Expect from Küryakyn • The Only Pipe Like it on the Market

CRUSHER TRUE DUALS ’95 AND UP TOURING MODELS We’ve combined performance, sound & great looks into one package. Each cylinder breathes through its own head pipe & muffler, greatly improving flow & making the bike much easier to tune. Power is increased as heat is reduced. ’95-’08 left side pipes tuck in close for passenger comfort. Crusher True Duals for ’09 and up bikes run the left pipe beneath the motorcycle; well away from the passenger’s feet & legs. Includes heat shields & mounting hardware. All that’s left to do is choose the mufflers to complete your high-performance package – Crushers or Beast Ovals! FOR

Fits: Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

K477

K496 Fits: ’95-’06 Models (set) K497 Fits: ’07-’08 Models (set) K477 Fits: All ’09 Models (set) K476 Fits: All ’10 and up Models (set)

Note: ’10 FLHX & FLTRX require Left Side Muffler Mount Kit (P/N K560).

K494 ’95-’06 Exhaust Bracket K560 Muffler Support Bracket & Rubber Grommet (ea)

Fits: ’95 and up Touring Models (Mounts 1 muffler)

K561 Trike Exhaust Adapter Kit (pr)

Note: Required to install P/N K476 or P/N K477 on ’09 and up Tri Glide & Street Glide Trikes. Note: ’95-’06 motorcycles equipped with aftermarket ECUs with O2 sensors must order Crusher True Dual Head Pipes (P/N K497) & ’95-’06 Exhaust Bracket (P/N K494).

K497

YOU CAN’T BUY A BETTER PERFORMING DUAL SYSTEM!

K508

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

271

PERFORMANCE

AIR CLE ANERS

ENGINE MANAGEMENT

E XHAUST

FOR TOURING MODELS THE PERFECT STORM WITH STREET SLEEPER AIR CLEANER, CRUSHER TRUE DUALS & MUFFLERS & TTS MASTERTUNE:

K00-1011 Fits: ’02-’06 Touring w/Street Sleeper & Trident

K00-1001 Fits: ’02-’06 Touring w/Hi-Five Mach 2 &

K00-1012 Fits: ’02-’06 Touring w/Street Sleeper & Slip

K00-1002 Fits: ’02-’06 Touring w/Hi-Five Mach 2 &

K00-1013 Fits: ’07 Touring w/Street Sleeper & Trident

K00-1003 Fits: ’07 Touring w/Hi-Five Mach 2 &

K00-1014 Fits: ’07 Touring w/Street Sleeper & Slip Stream

K00-1004 Fits: ’07 Touring w/Hi-Five Mach 2 & Slip

K00-1015 Fits: ’08 Touring w/Street Sleeper & Trident

K00-1005 Fits: ’08 Touring w/Hi-Five Mach 2 &

K00-1016 Fits: ’08 Touring w/Street Sleeper & Slip Stream

K00-1006 Fits: ’08 Touring w/Hi-Five Mach 2 & Slip

K00-1017 Fits: ’09 Touring w/Street Sleeper & Trident

K00-1007 Fits: ’09 Touring w/Hi-Five Mach 2 &

K00-1018 Fits: ’09 Touring w/Street Sleeper & Slip Stream

K00-1008 Fits: ’09 Touring w/Hi-Five Mach 2 & Slip

K00-1019 Fits: ’10 and up Touring w/Street Sleeper &

K00-1009 Fits: ’10 and up Touring with Hi-Five Mach

K00-1020 Fits: ’10 and up Touring w/Street Sleeper & Slip

K00-1010 Fits: ’10 and up Touring with Hi-Five Mach

Mufflers

Stream Mufflers Mufflers Mufflers Mufflers Mufflers Mufflers Mufflers

Trident Mufflers

Stream Mufflers

Trident Mufflers

Slip Stream Mufflers Trident Mufflers

Stream Mufflers Trident Mufflers

Stream Mufflers

2 & Trident Mufflers

2 & Slip Stream Mufflers

FOR SOF TAIL MODELS

FOR DYNA MODELS

Fits: ’01-’10 Fuel Injected Softails

Fits: ’07-’11 Dyna

K00-1021 K00-1022 K00-1023 K00-1024

272

THE PERFECT STORM WITH HI-FIVE MACH 2 AIR CLEANER, CRUSHER TRUE DUALS & MUFFLERS & TTS MASTERTUNE:

Street Sleeper II & Crusher Power Cell Street Sleeper II & All Chrome Crusher Power Cell Hi-Five Mach 2 & Crusher Power Cell Hi-Five Mach 2 & All Chrome Crusher Power Cell

K00-1025 Street Sleeper II & Crusher Power Cell K00-1026 Hi-Five Mach 2 & Crusher Power Cell

T H E B E S T F LO W I N G A I R C L E A N E RS , T H E B EST P E R FO R M I N G & S O U N D I N G EX H AUST & TH E M OST P O W E R F U L T U N I N G TO O L M A K E TH IS TH E M OST E FFECTIVE AI R C LE AN E R / EX H AUST / T U N E R C O M B I N AT I O N E V E R TO E X I S T F O R Y O U R H A R L E Y TO U R I N G M OTO R C Y C L E !

STOCK 110 VS. THE PERFECT STORM

STOCK 96 VS. THE PERFECT STORM

23 Horsepower & 25 ft.lbs of Torque Gain

14 Horsepower & 17 ft.lbs of Torque Gain

DON’T GET STUCK WITH THE SAME OLD TIRED 20TH CENTURY PARTS. MOVE INTO THE 21ST CENTURY! • D RIVA B I LITY N EVE R E X P E R I E N C E D B E FO R E • L A RG E PO W E R I N C RE AS E • I N C R E A S E D T H R OT T L E R E S P O N S E TH RO U G H O UT E NTI RE RP M RAN G E • A S O U N D YO U R F R I E N DS W I L L E N V Y •EXCELLENT FUEL MILEAGE • C O O L E R T E M P E R AT U R E S FO R YO U & YO U R PAS S E N G E R

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

273

H E A R I T. . . I purchased The Perfect Storm & I’m blown away by the performance…Thank you Küryakyn for making that hat thrill between my legs even more exciting…

Rich “Guido” Fotheringham – Asheville, NC

THE PERFECT

Kyle from Oshkosh, WI

A fella followed me off the highway & waited until I had fi nished a phone call, then inquired about the exhaust system. He had just purchased a 2011 Road King & said that when I passed him, my exhaust was the best sounding system he had ever heard. I could not agree with him more.

If you’re serious about performance, looks, & sound, then you should consider the Perfect Storm. I’ve now had these on the bike for six months & about 7K miles, & love them more everytime I fi re the bike up. These should be everyone’s fi rst modification after buying a Harley.

STORM

Jim Darrol from Bend Oregon – Sturgis 2011

“Love the sound”

Bob Nimtz – Burbank, California

Frank & Mellony Duffy – Sturgis 2011

FO R C US TO M K I TS & CO M P L E T E O P T I O N S C H E C K W I T H YO U R K Ü RYA K Y N R E P R E S E N TAT I V E O R G O T O

W W W. K U R YA K Y N .C O M

on the

track C H EC K O U T K Ü RYA K Y N O N T H E R AC E T R AC K T H I S Y E A R AT A M E R I C A’ S TO P N AT I O N A L R O A D C O U R S E S I N T H E A M A P R O VA N C E & H I N E S X R120 0 S E R I E S . T H I S FA S T PAC E D, C O M P E T I T I V E ROA D R AC I N G S E R I E S T E S T S M A N A N D M AC H I N E O N B O A R D T H E H A R L E Y D AV I D S O N X R120 0 . F O R T H E F U L L R A C E S C H E D U L E A N D I N FO R M AT I O N O N T H E R I D E RS V I S I T K U RYA K Y N . C O M / R AC I N G .

274

“I’m really happy with them. I think everybody should take a look at these pipes. They’d be more than happy with them.”

POWER (HP)

CATEGORY I CATEGORY II

2.5

3.0

3.5

4.0

4.5

5.0

ENGINE SPEED (RPM X

5.5

6.0

1000)

100

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

ENGINE SPEED (RPM X

POWER (HP)

CATEGORY III

5.5

6.0

6.5

120

100

20 2.0

2.5

3.0

3.5

4.0

4.5

5.0

ENGINE SPEED (RPM X

5.5

6.0

6.5

1000)

160

140

120

100

20 2.5

3.0

3.5

4.0

4.5

5.0

ENGINE SPEED (RPM X

5.5

1000)

6.0

6.5

7.0

TORQUE (FT- LBS)

160

2.0

• Küryakyn High Flow Air Cleaner • Küryakyn True Dual Head Pipes • Küryakyn Crusher Mufﬂers • TTS Master Tune

1000)

120

1.5

READY TO TAKE YOUR PERFECT STORM TO THE NEXT LEVEL?

• Küryakyn High Flow Air Cleaner • Küryakyn True Dual Head Pipes • Küryakyn Crusher Mufﬂers • TTS Master Tune • Küryakyn High Performance Cams

TORQUE (FT- LBS)

CATEGORY IV

POWER (HP)

THE PERFECT STORM: THE QUICK BUMP:

TORQUE (FT- LBS)

THE CHEAP THRILL: THE CHEAP THRILL:

100

TORQUE (FT- LBS)

100

• Küryakyn High Flow Air Cleaner • Küryakyn True Dual Head Pipes • Küryakyn Crusher Mufﬂers • TTS Master Tune • Küryakyn High Performance Cams • Küryakyn High Compression Pistons • Küryakyn High Flow Air Cleaner • Küryakyn True Dual Head Pipes • Küryakyn Crusher Mufﬂers • TTS Master Tune • Küryakyn High Performance Cams • Küryakyn High Compression Pistons • Küryakyn Cylinder Heads

MIKE ROLAND

BUILDING THE MOST T E C H N O L O G I C A L LY A DVA N C E D P E R FO R M A N C E PA RTS O N TH E M A R K E T! We took a good look at what was going on in the H-D performance world & figured there had to be a better way. Many so-called innovations were rehashes of existing designs. Our innovative products are designed to not only make big power, but to solve some of the normal problems associated with high output engines such as hard starting, detonation (pinging), poor drivability & top-end noise. Wild Things kits can make up to 130+ horsepower & 120+ pound-feet of torque, but be as street friendly as it gets. The Wild Things line includes a wide range of cams including the most powerful bolt-in cams available, highly technologically advanced cylinder heads, pistons, high-flow throttle bodies, high flow air cleaners & performance exhaust. We are putting tremendous effort into developing more new & advanced performance parts.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

275

THROTTLE BODIES HIGHEST TORQUE & HORSEPOWER T H ROT T L E B O DY O N T H E M A R K E T - P E R I O D !

WILD THINGS® 57MM THROTTLE BODIES Now you can let your engine really breathe! Stock throttle bodies restrict airflow, robbing power, especially from modified engines with large displacement &/or high-flow heads. With our 57mm throttle bodies, you can increase horsepower big-time in Delphi fuel injected Harleys. A larger plenum area, longer short side radius for greater & smoother flow, & relocated nozzles for better fuel distribution are just a few of the improvements. Virtually all stock components are reused & will bolt onto the throttle body without any modification. Our throttle body is designed with the stock Delphi air cleaner bolt pattern so it will accept any H-D or Küryakyn air cleaner. It even allows you to retain your factory cruise!

K469

FITS:

’06 AND UP TWIN CAM MODELS (EXCEPT ’08 AND UP TOURING /TRIKES & ’11 AND UP FLSTSE) WITH DELPHI FUEL INJECTION

Note: Wild Things Intake fl anges are required & must be purchased separately.

K467

K469 Wild Things Throttle Body (ea) K457 Wild Things Intake Flanges (pr)

Fits: ’06 and up Twin Cams with Wild Things Heads or ’05-earlier style Screamin’ Eagle Heads

K467 Wild Things Intake Flanges (pr)

Fits: ’06 and up Twin Cams with Stock or Screamin’ Eagle Heads

Important: As with any performance product, tuning is essential to achieve maximum gains in horsepower & torque. Stock or aftermarket ECU re-mapping is required!

FITS:

’01-’05 TWIN CAM MODELS WITH DELPHI FUEL INJECTION

Note: Softail Models require Fuel Supply Tube (P/N K441). Touring Models require Spacer Kit (P/N K442) any model using a Küryakyn Air Cleaner requires Support Bracket (P/N K8374).

K440 Wild Things Throttle Body & Manifold (ea) K439 Wild Things Throttle Body & Manifold for 1.800” Intake Ports (ea)

K455 Wild Things Throttle Body with Wide Manifold (ea) K456 Wild Things Throttle Body with Wide Manifold for 1.800” Intake Ports (ea)

K441 Steel Fuel Supply Tube for Softail (ea) K442 Spacer Kit for Touring Models (ea) K8374 Air Cleaner Support Bracket (ea) Note: Some larger than stock engines use taller cylinders than stock. P/N’s K455 & K456 are designed for these applications that require a wider intake manifold. The design allows for trimming to length for your particular application.

276

K440

TTS MASTERTUNE KIT

THE MOST POWERFUL ENGINE MANAGEMENT SOLUTION, BAR NONE!

The most powerful tuning tool available for your motorcycle’s ECM, bar none! This one tool contains three powerful programs including MasterTune tuning software, Data Master data acquisition & VTune, a self tuning software solution. MasterTune has over 20 tables & parameters to optimize your ECM including air-fuel mixture & timing. (Some early year bikes may have fewer tables) FEATURES

• For ’01 and up Delphi Equipped H-D motorcycles (except ’11 and up Softails & ‘12 and up Dynas)

• Detailed data acquisition aids in tuning & diagnostics

• Tunes your factory ECM - No add on boxes

• Change factory RPM limit & speedometer calibration

• Save & restore original factory calibration

• 2-D & 3-D graphing of tables to help visualize tuning maps

K9220 MasterTune Single Bike Kit (ea) K9221 MasterTune Dual Bike Kit (ea) K9222 MasterTune Serial Cable (ea)

• Adjust for different fuel injector flow rates & engine size

K9223 MasterTune USB Cable (ea) K9224 MasterTune for Magneti Marelli (ea) K9225 MasterTune for ‘11 and up Softail & ‘12 and up Dyna (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

277

WILD THINGS

TC-1 & TC-1G (’99-’06 [except ’06 Dyna]) TC-1U (’99-’06 [except ’06 Dyna])

Bolt-in low-end & mid-range power with a little more up top. top 80+ horsepower possible with no head work in an 88”. Also works very well in 95 inch motors up to 10:1 compression. Gear drives give you more accurate timing & more long-term power & reliability by eliminating the drive chain stretch & the possibility of tensioner failure on ’99-’06 Models.

K420 Wild Things TC-1 Cams (set) K422 Wild Things TC-1G Cams (set) K470 Wild Things TC-1U Cams (set) TC-46 G (’99-’06 [except ’06 Dyna]) TC-46 D (’06 Dyna & all ’07 and up)

High lift version of the TC-4G. 95 inch & up motors can make some impressive power over a wide power band. 120+ horsepower possible in a 95 inch. Increased compression & head work, large carb/throttle body & performance pipes necessary if you want to make full use of this Cam.

K424 Wild Things TC-46G Cams (set) K463 Wild Things TC-46D Cams (set)

TC-4 G (’99-’06 [except ’06 Dyna]) TC-4 U (’99-’06 [except ’06 Dyna]) TC-4 D (’06 Dyna & all ’07 and up)

Big power available in 95 inch & up motors. Increased compression & head work, large carb or throttle body & pipes will really make this Cam shine. Well over 110 horsepower is possible, even mid to high teens from a modified 95 inch.

K421 Wild Things TC-4G Cams (set) K473 Wild Things TC-4U Cams (set) K462 Wild Things TC-4D Cams (set) Note: Valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N K435). TC-26 G (’99-’06 [except ’06 Dyna]) TC-26 U (’99-’06 [except ’06 Dyna]) TC-26 D (’06 Dyna & all ’07 and up)

High lift version of the TC2-G. Great all around power potential from this cam. With the Wild Things Heads, Pistons, & Throttle Body, we have made over 120 H.P. A very street friendly Cam.

Note: Some clearancing, valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N K435). TC-5G (’99-’06 [except ’06 Dyna])

High horsepower & torque cruiser cam for 103 inch & larger engines. High compression, headwork, large carburetor or throttle body, & performance pipes will bring out the most with this Cam.

K426 Wild Things TC-5G Cams (set) Note: Valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N K435).

K408 Wild Things TC-26G (set) K472 Wild Things TC-26U Cams (set) K461 Wild Things TC-26D Cams (set) Note: Some clearancing, valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N K435).

WILD THINGS® CAMS

Most cams trade low-end power & torque for upper horsepower or top-end performance for low-end torque. Küryakyn’s Wild Things Cams are finessed to give wide usable power-bands with strong low end, big torque, high horsepower & extended RPM ranges. Low noise & long valve train life are also features built into our Cams. No other cams on the market can replicate the results of Wild Things Cams, period! WILD THINGS® CAM GRINDS ARE OFFERED IN FOUR DRIVE CONFIGURATIONS:

• All Cams designated without a letter suffix (example: TC-1) are chain drive style cams for ’99-’06 Twin Cams & use stock splined gear & chain (’99 Models with keyed drive gear will have to install a splined gear) • All Cams designated with a “G” (example: TC-2G) are gear drive Cams & require an S&S gear drive & installation kit (sold separately) • All Cams designated with a “D” (example: TC-2D) are chain drive style Cams for ’06 Dyna & all ’07 and up Twin Cams & use stock cam chain drives • All Cams designated with a “U” (example: TC-2U) are designed to upgrade ’99-’06 Twin Cam engines to use the ’06 Dyna/’07 and up chain drive & oil pump (See sidebar for details) • Gear drives give you more accurate timing & more long-term power & reliability by eliminating the drive chain stretch & the possibility of tensioner failure on ’99-’06 Models

278

CAM SPECIFICATIONS FOR TWIN CAM Grind TC-1/1G/1U INTAKE EXHAUST TC-2/2G/2D/2U INTAKE EXHAUST TC-4G/4D/4U INTAKE EXHAUST TC-26G/26D/26U INTAKE EXHAUST TC-5G INTAKE EXHAUST TC-46G/46D INTAKE EXHAUST TC-546G/546D INTAKE EXHAUST

Lift

Lift @ TDC

Opening

Closing

Duration

Lobe Center

(inches)

(degrees)

.510 .498

.158 .121

15 40

41 08

236 228

103 106

.510 .495

.169 .145

18 48

50 14

248 242

106 107

.560 .550

.217 .181

26 52

54 20

260 252

104 106

.575 .495

.175 .145

18 48

50 14

248 242

106 107

.590 .560

.225 .189

27 58

59 22

266 260

106 108

.625 .575

.230 .182

26 52

54 20

260 252

104 106

.630 .234 27 59 266 106 .575 .182 52 20 252 106 Important: Our TC-4, TC-46, TC-5 & TC-546 Cams are specially designed to allow you to use the stock starter in larger than stock engines & help eliminate detonation (pinging) up to 10.5:1 compression while using 92-octane premium fuel. Believe us when we say this is critical. It is also very rare for anyone else to offer you this combination.

T H E B E S T P I S T O N S Y O U C A N B U Y F O R Y O U R 9 5 ” O R 10 3 ” T W I N C A M TC-546 G (’99-’06 [except ’06 Dyna]) TC-546 D (’06 Dyna & all ’07 and up)

A Wild Things Cam for engines over 100 C.I. Huge power available while still retaining good drivability & a quiet running engine. Really helps in starting those high compression large inch engines.

K409 Wild Things TC-546G Cams (set) K464 Wild Things TC-546D Cams (set) Note: Some clearancing, valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N K435).

TC-2 & TC-2 G (’99-’06 [except ’06 Dyna]) TC-2U (’99-’06 [except ’06 Dyna]) TC-2D (’06 Dyna & all ’07 and up)

Bolt-in performance Cam for 88 to 103 inch motors. Gain more power over the whole RPM range. 90+ horsepower is possible in an 88 inch with no head work, but really comes alive with more inches & higher compression.

K423 Wild Things TC-2G Cams (set) K471 Wild Things TC-2U Cams (set) K460 Wild Things TC-2D Cams (set)

WILD THINGS® U SERIES CAMS

Allow you to upgrade your ’99 to ’06 Twin Cam to Harley’s new roller chain drive with hydraulic tensioners & the higher volume oil pump of the ’06 Dyna & all ’07 and up Twin Cam Models. With Wild Things® quiet-running Cam profiles & the H-D’s new drive system, your engine will be whisper quiet & have great performance. H-D’s new higher volume oil pump provides consistent & better oil pressure along with better scavenging. With U Series Cams, you can have the latest in Harley technology & Küryakyn performance in your ’06 & earlier Twin Cam. Converting ’99-’06 silent chain cam drives to the ’06 Dyna/’07 and up Twin Cam roller chain requires new parts from H-D in addition to the Cam Shaft Set from Küryakyn. These parts are listed below, but can also be found in the H-D 2006 Dyna® parts catalog (#99439-06) or the applicable ’07 and up parts catalog for your bike. 26037-06 25355-06 4741 11461 25683-06 39969-06 25675-06 39968-06

Oil Pump Assembly Cam Support Plate Assembly Support Plate Screws Retaining Ring (front cam) Inner Roller Chain Inner Chain Tensioner Outer Roller Chain Outer Chain Tensioner

25729-06 25731-06 25734-06 25736-06 25737-06 25738-06 25673-06 25728-06

Spacer (.100 for cam alignment; use required) Spacer (.110 for cam alignment; use required) Spacer (.120 for cam alignment; use required) Spacer (.130 for cam alignment; use required) Spacer (.140 for cam alignment; use required) Spacer (.150 for cam alignment; use required) Crankshaft Sprocket (17 teeth) 34 Tooth Stock Rear Cam Sprocket

Note: ’99-’01 engines require Andrews 34 Tooth Rear Cam Sprocket. Note: Parts such as gaskets & screws may be needed to complete the conversion to roller chains. (used only with ’02-’06 engines)

HIGH FLOW FUEL INJECTION NOZZLES

ANDREWS GEAR DRIVE INSTALLATION KIT

These split flow high volume nozzles divide the fuel flow around the valve stem & valve guide. When used in our 57mm throttle body the fuel is directed into the highest flow areas of the port & directly at both sides of the valve opening giving you the ultimate in fuel distribution. Drivability & horsepower are enhanced. They flow enough fuel for even the nastiest of street motors.

Designed for S&S Gear Drives, includes upgraded bearings to replace stock bearings, a new snap ring, & a gasket for the cam cover. Required for all Wild Things gear-drive Cams used with S&S Gear Drive Kits.

Fits: Wild Things 57mm Throttle Body for ’06 and up Twin Cam (P/N K469). Can also be used on all ’06-’07 Stock H-D & S-E 50mm Throttle Bodies & ’08 and up Stock & S-E 50mm Throttle Bodies for Softail & Dyna

K468 High Flow Fuel

Injection Nozzles (ea)

K418 Andrews Gear Drive Installation Kit (ea)

K418

COMETIC® CAM SERVICE GASKET SET Provides all the gaskets & seals needed when changing a cam (cam cover, push-rod tubes, rocker boxes, etc.) Fits: ’99 and up Twin Cam engines

K481 Cam Chest Gasket Set (set)

K481

S&S GEAR DRIVE KIT Improve performance over the stock chain drives by accurately controlling valve timing & reducing frictional losses. Requires Andrews Gear Drive Installation Kit.

K419

K419 S&S Gear Drive Kit (ea) Note: Installation Kit (P/N K418) required.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

279

WILD THINGS® PISTONS • Forged from the highest-grade aluminum alloy designed for piston use .

WILD THINGS® FORGED & BILLET HEADS FOR TWIN CAM FOR

95” DOMED PISTON OR 103” DISH DOME PISTON APPLICATIONS

The most technologically advanced heads on the market. Mike Roland’s designs carefully balance the production of awesome horsepower & torque with the important qualities of a good street motor - Starts as easy as a stock bike, runs on pump gas without any detonation, runs cooler than stock, & is as tractable as a stock bike. • 95” build requires use of Wild Things Pistons (P/Ns K444 or K443) • 103” builds require use of Dish Domed Pistons (P/N’s K475 or K459) • Combustion chamber machined with 15-degree squish M O R E F E AT U R E S FOUND ONLINE

• Yields 10.5 to 1 compression ratio • Fits all ’99 and up Twin Cam—Including ’08 and up Touring

• The redesigned dome shape on the high-compression piston for stock heads results in less pumping losses (robbed power) & better combustion efficiency & detonation control (pinging). • All kits come complete with pistons, pins, keepers & rings. DOMED PISTONS FOR STOCK H - D HEADS

Kit for 95” Twin Cam (3.875” bore)

Things Domed or Dish Dome Pistons (set)

• Larger & deeper valve pockets will handle larger valves & cams without extra machine work. The decks are slightly raised for ease of setting a tight squish.

K445 Forged 10.5:1 Domed Piston

K432 Wild Things Billet Street Heads, Polished - For Wild

• The special skirt shape & material means less break-in time, quieter running & a stronger resistance to scoring.

K448 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (.010” over 3.875” bore)

DOMED PISTONS FOR WILD THINGS ® HIGH COMPRESSION HEADS

K444 Forged 10.5:1 Domed Piston

A. COMETIC® EST

C. COMETIC®

TOP END GASKET SET

MLS HEAD GASKETS

This EST (Extreme Sealing Technology) Top End Gasket Set uses the best possible materials available for every gasket in the kit, making these truly the best kits available. Includes every gasket & seal from the base gasket right up to the air cleaner.

Gaskets are available in various thicknesses, so setting up your quench area or “squish band” is no problem. FOR 88” & 96” TWIN CAM

Fits: 95”& 103” Twin Cam Engines – includes .045” head gasket

K480 EST Hi-Performance

Top End Gasket Kit (set)

B. COMP CAMS

HIGH LIFT SPRING KIT

This high quality High Lift Spring Kit is a must when using any of our high performance Cams (TC-4G, TC-46G, TC-5G, TC-26G, TC-546G, ER-2, or ER-46) on ’84-’99 Evolution or ’99-’04 Twin Cam engines. • Titanium top retainer • Interference wound double springs with damper • For use with cams up to .640” lift • 180 lb. seat pressure • Can be used in ’05-later engines if valves & guides have been converted to 5/16” diameter

K435 Comp Cams High Lift Spring Kit (set)

280

(MULTI-LAYER STEEL)

K483 MLS Head Gasket 030” (pr)

FOR 95” & 103” TWIN CAM (SOLD IN PAIRS)

K484 K485 K486 K487

MLS Head Gasket - .030” MLS Head Gasket - .040” MLS Head Gasket - .045” MLS Head Gasket - .051”

D. AUTOLITE™ EXTREME SPORT SPARK PLUGS Fine wire design increases ignition power & extends the life of these superior plugs.

K325 AXS4164DP (pr)

Fits: All ’99 and up Twin Cam, all ’88 and up Sportsters, ’88-’00 GL1500, ’96-’03 Valkyrie, ’84-’87 GL1200

K326 XS65 (pr)

Fits: ’84-’99 Evo B.T. (carb & EFI), ’78-’81 80” Shovel, ’75-’80 74” Shovel

Kit for 95” Twin Cam (3.875” bore)

K443 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (.010” over 3.875” bore)

FLAT TOP PISTONS

K458 Forged Flat Top Piston Kit

for 103” Twin Cam including ’07-to-’11, 96”–to–103” conversions (3.875” bore)

K449 Top Piston Kit for 103” Twin

Cam including ’07-to-’11, 96”– to–103” conversions (.010” over 3.875” bore)

DISH DOME PISTONS

K475 Forged Dish Dome Piston for 103” Twin Cam with Wild Things Heads (P/Ns K428, K431, K432), 3.875 bore

K459 Forged Dish Dome Piston for

103” Twin Cam with Wild Things Heads (P/Ns K428, K431, K432), .010” over 3.875 bore

MISCELLANEOUS C H O C K S , S TA N D S & T I E D O W N S CUSTOM TIE-DOWN BRACKETS K928

These stylish, custom brackets bolt to the sides of the front fork & provide a secure, easily accessible point to attach tie-down straps to the front of the motorcycle. FOR SOFTAIL

K926

Fits: ’86-’90, ’06 FLST Heritage, ’89 and up FLSTC Heritage Classic, ’90 and up FLSTF Fat Boy, ’10 and up FLSTFB Fat Boy Lo, ’93-’94 FLSTN Heritage Nostalgia, ’95-’96 FLSTN Heritage Special, & ’05 and up FLSTN Deluxe (Compatible with stock H-D detachable windshields, but not compatible with Airmaster Quick Release Windshields or AirMaster Fairings.)

K926 Teardrop Custom Tie-Down Brackets (pr) FOR TOURING

Fits: ’83 and up Ultra Classic Electra Glides, Electra Glide Ultra Limited, Electra Glide Classics, Electra Glide Standards, Road Kings, Road King Classics, & Road King Customs (Compatible with Road King detachable windshields)

K928 Teardrop Custom Tie-Down Brackets (pr) K929 Silhouette Custom Tie-Down Brackets (pr) FOR STREET GLIDE

K929

& CVO

Fits: ’06 and up FLHX, ’04-’05 FLHTCSE, ’06 and up FLHTCUSE, ’10 and up FLHXSE & anyTouring Models equipped with Küryakyn 5005 or 5029 Driving Lights

K924

K924 Tie-Down Brackets (pr)

AIR FORCE BLASTER

AIR FORCE BLASTER SIDEKICK

FROM METRO

Its 4 peak H.P. motor & 2-stage dual fan provides a super high velocity, mildly heated air column that cuts drying time by approximately 75%. A variety of interchangeable tips included.

A compact, powerful hand held motorcycle dryer that’s small enough to put in a saddlebag yet strong enough to dry a bike off in minutes! At just over 3 pounds, the all steel Sidekick’s 1.3 H.P. motor produces a large volume of warm filtered air & is great at home or on the road.

K900 Air Force Blaster (ea)

K905 Blaster Sidekick (ea)

Note: 230 volts.

NO DRILLING! NO HARDWARE! NO MOUNTING!

EZ CHOCK™

Note: 230 volts.

K964

1. SET IN PLACE

U.S. Patent D547,712 & 7,044,309

With the EZ Chock, the hassle of drilling or mounting any hardware for wheel chocks is a thing of the past! The EZ Chock design allows the use of the same chock in the truck, trailer or toy hauler without additional mounting hardware. It’s patented plate & tab strapping design secures your bike in place without the traditional mounting hardware that all other chocks require.

STANDARD TIE DOWNS

2. SET REAR STRAPS

• 400lb Workload per strap • Industrial grade buckle • Vinyl-coated hooks

K935 3-1/2” for Cruisers with Narrow

Front Tires or Dirt Bikes (ea) Note: We suggest P/N K935 for motorcycles with 80/90, 90/90, or MH/90 front tires.

• 4500lb Test nylon webbing

• 6’ long, 1” wide straps

K964 Standard Tie

3. STRAP IN THE BIKE

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

Downs (pr)

281

CONDOR® WHEEL CHOCKS Condor motorcycle support & transportation solutions provide a fully adjustable wheel locking system capable of accommodating almost any motorcycle. The patented locking mechanism effortlessly & securely supports the motorcycle in an upright position. This makes tying down a motorcycle a simple & easy task for one person. We are so impressed with Condor Products, we use them in our company trailers for safe & secure transport of our motorcycles.

K920

K921 CONDOR® PIT- STOP/TRAILER STOP WHEEL CHOCK

• Accommodates front or rear wheel sizes from 15”-22”/80mm-220mm wide • Can be used as a work stand or trailer chock • Allows you to secure the bike with only 2 straps • With a trailer adapter kit (sold separately) the unit quickly & easily attaches to trailers or pick-up beds • Folds down for easy storage & weighs 21 lbs • Dimensions: 29” Wide, 30” Long, 15” High (folds to 6” high)

K920 Condor Pit-Stop/Trailer Stop Wheel Chock (ea)

K921 Adapter Kit for Condor Pit-Stop (ea)

CONDOR® SC 2000 TRAILER ONLY WHEEL CHOCK

• Accommodates front or K922 rear wheel sizes from 14”-22”/80mm-220mm wide • Intended to be used as a trailer chock only • Includes Trailer Mounting Adapter Kit - Unit quickly & easily attaches or detaches to any transportation platform (trailer, pick-up bed, etc.) • Allows you to secure the bike with only two straps • Folds down for easy storage & weighs only 26 lbs • Dimensions: 9” Wide, 25” Long, 15” High (folds to 7” high) K922 Condor SC2000 Trailer Only Wheel Chock with Adapter Kit (ea)

K923 Adapter Kit for SC2000 (ea)

Back

Front

KÜRYAKYN® T-SHIRTS

EMBOSSED KÜRYAKYN® METAL SIGN

You buy the parts to customize your motorcycle, now get the shirt to show people where you get your top quality parts.

Great addition to your shop or home.

K805 K806 K807 K809 K810 K811

L-Short Sleeve, Sand (ea) XL-Short Sleeve, Sand (ea) XXL-Short Sleeve, Sand (ea) L-Long Sleeve, Black (ea) XL-Long Sleeve, Black (ea) XXL-Long Sleeve, Black (ea)

KÜRYAKYN® CAN COOLER K8985 Can Cooler (pr)

282

K115032 Embossed Metal Sign (ea)

KÜRYAKYN® STAINLESS STEEL TRAVEL MUG Keep cold drinks cold & hot ones hot when you’re on the road. Stainless Steel inside & out with a closable lid to avoid spills.

K1469 Küryakyn Stainless

Steel Travel Mug (ea)

Note: Replacement for drink holders that originally have a travel mug.

GENERAL ACCESSORIES V-120 & V-120C HORNET® ELECTRONIC DEER AVOIDANCE SYSTEM

#1 ENDORSED DEER ALERT IN AMERICA

The Hornet has proven to be the only device to effectively deter deer accidents. There are tens of thousands of Hornets in daily use with millions of proven miles. Regardless of speed, it produces a sound pressure of 120 db, & under most circumstances is very resistant to contamination. Regular inspection & cleaning is recommended.

Shown with P-Clamp - pg 97

Proper placement is essential for maximum performance. The Hornet includes various universal mounting brackets, basic hardware & a switch. A separate motorcycle wiring kit is available & includes a harness & switch specifically designed for use on a motorcycle; while not required, it will make the installation much neater. Our P-Clamps work great on many motorcycles to assist in mounting to frames or engine guards. DEER ARE RESPONSIBLE FOR MORE DEATH & INJURY THAN ANY OTHER ANIMAL IN THE U.S.A.

Universal fit on 12-volt motorcycles

K4042 V-120 Hornet Deer Alert, Black (ea) K4043 V-120C Hornet Deer Alert, Chrome (ea) K4044 Motorcycle Wiring Kit for V-120/V-120C

HAWG BUDDY 7-IN-1 FOLD UP SET

K6023 K6016

HEX TOOLS

This compact fold up set has all the tools you need for keeping your motorcycle tight! Features a strong handle & the 7 tools for the most used fasteners on your H-D.

K6024 Hawg Buddy 7-in-1 Fold Up Set (ea)

FROM BONDHUS

Standard & Torx hex tools should be part of every rider’s basic tool kit.

KICKSTANDS & COMPONENTS K7110 Chrome Kickstand Spring (ea)

STANDARD HEX KEYS

K6016 13pc Black Ball End, .050”-3/8” (set)

K7112 Kickstand (ea)

FOLDING HEX KEY SETS

Fits: All ’89-’06 Softail Models

K6018 5pc Fold-Up 3/16-3/8 Hex (set) K6019 9pc Fold-Up, .050-3/16 Hex (set) K6023 8pc Fold-Up, T9-T40 Torx (set)

K760

K761

K751

K7113 Kickstand (ea)

Fits: All ’83-’06 Dressers & Road Kings

K757 K750

K755

K753

K756

GUARDIAN® BELLS Ward off the evil road spirits with a Guardian Bell. Legend has it that evil road spirits have been latching themselves onto motorcycles for as long as there’s been bikes on the road. By attaching a Guardian Bell to your motorcycle you can drive the evil spirits away. Give a Guardian Bell as a gift to share the Legend of Good Luck to a motorcycle & its rider!

K750 Eagle (ea) K751 Celtic (ea) K752 Holy Cross

K758 Never Ride

K753 P.O.W. (ea) K754 Lady Rider

K759 Flame (ea) K760 Grenade

K755 Skull (ea)

K761 Ride It Like

(ea)

K754

K7112

Note: Requires motorcycle to be equipped with Kickstand Bumper.

K759

K758

K7110

Fits: ’85-’06 Softails, all ’91-’06 Dressers & Road Kings, ’91-’94 FXR, & all ’91-’06 Sportsters

K752

K756 Halo (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

K757 Old Glory (ea)

Faster (ea)

(ea)

You Stole It (ea)

283

K4203 • Charges virtually all lead-acid battery types: Wet, Sealed, Gel & AGM • Splashproof & weatherproof – Sealed design is approved for outdoor use • Compact, lightweight, & easily portable • Patented technology protects against sparks, short circuits & reverse polarity • Does not damage sensitive electronics • Recovers or “wakes” a sulfated or under charged battery • Each charger includes clips & one Quick Connect Cord Set CTEK MULTI US 7002 CTEK US 800 • Six step, fully automatic switch • Easily charges all small mode model for all types of leadbatteries & is an excellent acid batteries (wet, sealed, AGM) maintenance charger for seasonal vehicles with batteries • Maintenance pulse charging up to 100 Ah increases battery life • Begins charging at 0.8A • Charges even drained batteries – Pulse recover of sulfated batteries • Sends out current pulses for charge maintenance, will not • Charging Voltage: 14.4or 14.7 over-charge • Charging Amperage: Up to 7A • Ideal uses: Motorcycles, ATVs, • Can be used as a power supply to personal watercraft, snowmobiles operate equipment at 13.6 V up to 7A

K4258 CTEK MULTI US 7002 (ea)

K4202 CTEK US 800 (ea)

3300 • Strong multi-tasker that can handle all but the largest vehicles • Three changing modes 0.8A@14.4V, 3.3A@14.4V, & 3.3A@14.7V • Unique cold temperature mode enables faster re-charging, even in the coldest winter conditions • Charges all types of lead-acid batteries (wet, sealed, AGM) • Specifically recommended for Optima Red Top batteries • Ideal uses: All CTEK US 800 applications + boats, campers, & trucks

CTEK MULTI US

K4203 CTEK MULTI US 3300 (ea) K4204

K4238

EXTRA QUICK CONNECT CORD SETS FOR CTEK BATTERY CHARGERS

K4204 Fits: White or White & Black Quick Connector (ea)

K4238 Fits: Orange & Black Quick Connector (ea)

COMFORT INDICATOR QUICK CONNECTS Monitoring, charging, & maintaining your battery is now a snap! • Green Light: Battery is OK & does not need to be charged • Yellow Light: Battery should be charged to avoid stratification • Red Light: Battery needs charging to be able to start the vehicle Fits: CTEK chargers with orange & black quick connector

K4268 Comfort Indicator - Eyelet (ea) K4269 Comfort Indicator - Pigtail (ea)

WOBBLES LATELY? GRANDEUR CYCLE “THE MISSING LINK” ENGINE STABILIZER The Missing Link is designed to eliminate uncomfortable & dangerous riding conditions known as tank slap, rear steer or high speed wobble on rubber mounted Touring Models. It works just like the top & front stabilizer links to keep the engine centered in the frame by preventing the rear rubber mounts from compressing & moving. FEATURES

• All steel construction & powder-coated finish for years of worry-free use • Mounts out of the way above the transmission

do-it-yourself installation in 30 minutes or less Fits: All ’02-’08 Electra Glides, Road Kings, Road Glides, & Street Glides

• Instructions provide an easy, K396 The Missing Link Engine Stabilizer (ea)

284

K4268

L.E.D. Indicator Lights

K4269

A. WHITE DIAMOND®

B. DOC BAILEY’S LEATHER BLACK

METALS POLISH

Mild detergents clean the leather, lanolin oil conditions & restores the skin, then the black dye pigment restores the color! Natural waxes seal the color in & waterproofs your leather saddle bags, jackets, & motorcycle seats. Try it on anything black; running boards, car interiors, plastic, & rubber side walls - you’ll be impressed how well it works. Contains no silicone & will not bleed. Available in 4 oz detail kit with sponge applicator & buffing cloth.

Oxidization & discoloration is easily & quickly removed from aluminum, stainless, chrome, & brass while returning the surface to a brilliant shine. Also effective on minor gold & blue discoloration on chrome & stainless exhaust pipes. Besides containing an ultra fine polishing rouge, White Diamond contains a wax agent that will keep surfaces gleaming far longer than competing brands. New single use wipes come packaged in a 24 count countertop display box. One wipe will polish an entire motorcycle. Great for road trips!

K30 White Diamond Single-Use

Wipes (24 count with display)

K957 Doc Bailey’s Leather Black Detail Kit (4 oz Kit)

C. DOC BAILEY’S LEATHER CLEAR Clear formula designed for all color, exotic skins, & multi color leathers. Spray & Wipe Clear Formula cleans, conditions, restores & waterproofs all leather & vinyl. Excellent for riding leathers, motorcycle seats with stitching, leather furniture, car interiors – all colors of leather, vinyl, rubber & plastic! Available in a 4 oz detail kit with sponge applicator & buffing cloth.

K35 White Diamond Metals Polish,

D. GLARE®

ULTRA WASH

Biodegradable & safe for paints & finishes including enamel & clear-coated paints.

K943 Glare Ultra Wash (ea)

K958 Doc Bailey’s Leather Clear Detail Kit (4oz Kit)

12 oz (ea)

954

956

LIQUID HORSEPOWER FUEL TREATMENT LHP (Liquid Horsepower) is the most advanced & effective gasoline additive for use in both stock & high performance engines. The performance, protection, & fuel mileage it delivers will keep you coming back for more. FEATURES: • Maximum street legal octane booster potency approved by EPA • O2 sensor safe • Upper cylinder lubricant protects & extends life of valves, valve guides, pistons, rings, & cylinders • Prevents rust & corrosion • Stabilizes fuel to prevent gelling during storage • Complies with all manufacturer warranty requirements

K954 LHP 1oz Bottles (48 Count with 2 Displays)

K955 LHP 1oz Bottle (Treats 5 gal) (ea) K956 LHP 6oz Bottle (Treats 30 gal) (ea)

LOCTITE® THREAD TREATMENT STICKS SILVER GRADE ANTI-SEIZE STICK • Protects metal parts in high heat environments up to 1600ºF • Prevents rust, corrosion, seizing & eases disassembly

K97 Silver Grade Anti-Seize Stick (20 grams) (ea) 268 high strength red threadlocker stick • Eliminates loosening from vibration, shock, or thermal expansion & prevents rust & corrosion while sealing & protecting threads • Requires localized heat & hand tools for removal • Temp resistant to 300ºF, fully cured in 24 hrs

K96 268 High Strength Red

Threadlocker Stick (9 grams) (ea)

248 medium strength blue threadlocker stick • Eliminates loosening from vibration, shock, or thermal expansion & prevents rust & corrosion while sealing & protecting threads • Removable with hand tools • Temp resistant to 300ºF, fully cured in 24 hrs

K95 248 Medium Strength Blue

Threadlocker Stick (9 grams) (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

285

I CLICK- ON

CLICK- OFF

C H

A. LOCK REMINDER CORD

D. BILLET O-RING VALVE STEM COVER

G. CHROME UNIVERSAL

Never ride off with your disc lock in place again. These compact, yellow cords stretch from the disc lock to the handlebar to serve as a reminder to remove the lock.

Fits steel stems up to 5/8” (including locknut).

Don’t let anyone walk off with your helmet! Lock it right to your bike. Works on engine guards, frame tubes, or any other 7/8” to 1-1/2” tubes.

K4236 9 ft. (ea)

K9145 Short (pr)

K4232 For 1-1/4” to

E. CUSTOM VALVE

STEM COVERS

B. TIRE GAUGE

Reads from 2.5 lbs to 100 lbs in .5 increments.

K6012 Digital Tire Gauge

K9135 Long, Black (pr) K9136 Short, Red (pr) K9139 Short, Blue (pr)

with Hose (ea)

C. ROUNDIT® WIRE WRAP

This amazing wire loom adds a measure of protection & good looks to your wiring. Though tubular in shape, it’s actually a flat piece of material with a memory. A wire can actually be added or joined to an existing harness with no cutting or fishing necessary. Sold in 6 foot lengths.

K1987 1/4” -Black (ea) K1991 3/8” -Black (ea) K1995 1/2” -Black (ea)

286

HELMET LOCK

F. BURLY BRAND™

LITE CLUTCH KIT

Reduces the manual effort required to pull the lever by 40%. It reduces rider fatigue & offers smoother, easier clutch action. Fits inside the transmission’s side cover. Fits: All ’87-’99 Evo Big Twin (except FXR), all ’99-’06 Twin Cam (except ’06 Dyna), all ’86-’90 XL

K395 Burly Brand Lite Clutch Kit (ea)

1-1/2” Tube (ea)

K4220 For 7/8” to

1-1/4” Tube (ea)

Note: Installs with standard tools. Works best on a 2-1/4” long section of straight tube.

H. LICENSE PLATE HELMET LOCK WITH MOUNT Lock your helmet to your motorcycle. The mounting plate easily bolts to the back of almost any motorcycle & allows easy access for locking your helmet.

K4248 License Plate

Helmet Lock (ea)

I. CLIX L.E.D. PODS Click On - Click Off! Lights run on 3 AAA batteries (included) & run up to 100 hours.

K1626 Clix L.E.D. Pods (ea)

H-D MODEL REFERENCE GUIDE TOURING ELECTRA GLIDES

FLHS FLHT/I FLHTC/I FLHTCU/I FLHTK FLHTCSE

Electra Glide Sport Electra Glide Standard Electra Glide Classic Ultra Classic Electra Glide Electra Glide Ultra Limited CVO/Screamin' Eagle Electra Glide FLHTCUSE CVO/Screamin' Eagle Ultra Classic Electra Glide ROAD GLIDES

FLTR/I FLTRX FLTRU FLTRSE FLTRUSE FLTRXSE

Road Glide Road Glide Custom Road Glide Ultra CVO/Screamin' Eagle Road Glide CVO Road Glide Ultra CVO Road Glide Custom

STREET GLIDES

FLHX/I

Street Glide

FLHXSE

CVO Street Glide

TO A S S I S T I N S E L EC T I N G T H E C O R R EC T P RO D U C T FO R A PA RT I C U L A R A P P L I C AT I O N , W E H A V E A S S E M B L E D T H I S R E F E R E N C E G U I D E . I T C O V E R S N E A R LY E V E RY M O D E L P RO D U C E D I N T H E L A S T 20 Y E A RS . ( D U E TO L I M I T E D S PAC E , S O M E O M I S S I O N S H AV E B E E N M A D E . ) O U R G O A L T H R O U G H O U T T H E C ATA L O G I S T O K E E P F I T M E N T S A S E A S Y T O U N D E R S TA N D A S P O S S I B L E , E V E N T H O U G H T H AT I S N O T A LW AY S A N E A S Y TA S K . W E U T I L I Z E T H E B R O A D E S T A P P L I C AT I O N T H AT A C C U R AT E LY D E S C R I B E S T H E M OTO RC YC L E S T H E P RO D U C T W I L L F I T & E XC LU D E S P EC I F I C M O D E L S A S N E E D E D. FOR E X AM PLE , I F A PRODUC T FITS ALL ELEC TR A G LI DES MADE I N A PERIOD OF T I M E , W E W I L L S AY - “ F I T S : A L L ’ 0 9 - ’ 11 E L E C T R A G L I D E S ” . I F T H E R E A R E A N Y P A R T I C U L A R E L E C T R A G L I D E M O D E L S T H E P R O D U C T W O N ’ T F I T, W E W I L L N O T E T H E E X C L U S I O N B Y T H E L E T T E R D E S I G N AT I O N A N D / O R M O D E L N A M E - “ F I T S : A L L ’ 0 9 - ’ 11 E L E C T R A G L I D E S ( E X C E P T ’ 0 9 F L H T S TA N D A R D ) ” . T H E R E F E R E N C E G U I D E B E L O W L AY S O U T H A R L E Y- D A V I D S O N ’ S M O T O R C Y C L E FA M I L I E S , S U B - FA M I L I E S , & S P E C I F I C M O D E L S . I T D O E S N O T L I S T T H E Y E A R (S) PA RT I C U L A R M O D E L S W E R E O F F E R E D, B U T I T D O E S C O N N EC T T H E L E T T E R D E S I G N AT I O N S T O T H E M O D E L N A M E S & FA M I L I E S O F M O T O R C Y C L E S R E F E R E N C E D T H R O U G H O U T T H E C ATA L O G .

SOFTAIL

SPORTSTER

FL SOFTAIL MODELS

XLH883 XLH883 XLH883 XL883 XL883C XL883L XL883L XL883N XL883R XLH1200 XL1200S XL1200C XL1200R XL1200L XL1200N XL50 XL1200X XR1200/X

FLST/I FLSTC/I FLSTF/I FLSTFB

Heritage Softail Heritage Softail Classic Fat Boy Fat Boy Lo

FLSTN

Heritage Softail Nostalgia/Special

FLSTN/I

Softail Deluxe

FLTC

Tour Glide Classic

FLSTS/I FLSTSB

Heritage Springer Cross Bones

FLTCU/I

Ultra Classic Tour Glide

FLSTSC/I

Springer Classic

FLSTSE

CVO Softail Convertible

TOUR GLIDES

ROAD KINGS

FLHR/I FLHRC/I FLHRS/I FLHRSE/I

Road King Road King Classic Road King Custom CVO/Screamin' Eagle Road King

DYNA FLD

Dyna Switchback

FXD/I FXDB/I FXDB-S FXDB-D FXDC/I

Dyna Super Glide Dyna Street Bob Dyna Sturgis Dyna Daytona Dyna Super Glide Custom

FXDF FXDL/I FXDS-CONV FXDWG/I FXDX/I

Fat Bob Dyna Low Rider Dyna Convertible Dyna Wide Glide Dyna Super Glide Sport

FXDXT FXDI35

Dyna Super Glide T-Sport 35th Anniversary Super Glide

FXDWG2/3 FXDSE

CVO/ Screamin’ Eagle Dyna Wide Glide CVO/Screamin' Eagle Dyna

FXDFSE

CVO/Fat Bob

FX SOFTAIL MODELS

FXST/I FXSTB/I FXSTC FXSTD/I FXSTS/I FXSTSB FXCW FXCWC FXS FXSTDSE FXSTSSE

Softail Night Train Softail Custom Softail Deuce Springer Softail Bad Boy Rocker Rocker C Blackline CVO/Screamin' Eagle Deuce CVO/Screamin' Eagle Softail Springer

TRIKES FLHTCUTG FLHXXX

Tri Glide Ultra Classic Street Glide Trike

Sportster Sportster Deluxe Sportster Hugger Sportster Sportster Custom Sportster Low Superlow Iron 883 Sportster Sportster Sport Sportster Custom Sportster Roadster Sportster Low Sportster Nightster 50th Anniversary Forty-Eight

VRSC VRSCA VRSCB VRSCD VRSCR VRSCAW VRSCDX VRSCX VRSCF VRSCDX_ANV VRSCSE

V-Rod V-Rod Night Rod Street Rod V-Rod Night Rod Special V-Rod Limited Edition V-Rod Muscle V-Rod 10th Anniversary Edition Screamin' Eagle V-Rod

Bar & Shield Logo, Deluxe, Deuce, Dyna, Dyna Glide, Electra Glide, Evolution, Fat Bob, Fat Boy, Harley, Harley-Davidson, HD, H-D, Heritage Softail, Heritage Springer, H.O.G., HOG, Hugger, Low Rider, Night Rod, Night Train, Profile, Road Glide, Road King, Rocker, Screamin’ Eagle, Shovelhead, Softail, Sportster, Springer, Street Bob, Street Glide, Street Rod, Super Glide, Tour-Pak, T-Sport, Twin Cam, Twin Cam 88, Twin Cam 88B, Twin Cam 96, Twin Cam 96B, Twin Cam 103, Twin Cam 103B, Twin Cam 110, Twin Cam 110B, Ultra Classic, V-Rod, VRSC, & Wide Glide are trademarks and/or registered trademarks of the Harley-Davidson Motor Company, Inc., Milwaukee WI, U.S.A. Harley-Davidson® Model designations are used in this catalog for reference only & include: FL, FLH,(FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLSTFB, FLSTSB, FLSTSC/I, FLSTSE), (FLHS, FLHT/I, FLHTC/I, FLHTCU/I, FLHTK, FLHTCSE, FLHTCUSE, FLTR/I, FLTRX, FLTRU, FLTRSE, FLTRUSE, FLTRXSE, FLHX/I, FLHXSE, FLTC, FLTCU/I, FLHR/I, FLHRC/I, FLHRS/I, FLHRSE/I), (FLD, FXD/I, FXDB/I, FXDB-S, FXDB-D, FXDC/I, FXDF, FXDL/I, FXDF, FXDL/I, FXDS-CONV, FXDWG/I, FXDX/I, FXDXT, FXDI35, FXDWG2/3, FXDSE, FXDFSE), FXLR, FXR, FXRS, FXRS-SP, FXRT, (FXST, FXSTB/I, FXSTC, FXSTD/I, FXSTS/I, FXSTSB, FXCW, FXCWC, FXS, FXSTDSE, FXSTSSE), FXWG, H-D, (XLH883, XL883 C/L/N/R, XLH1200, XL1200S/C/R/L/N, XL50, XL50, XL1200X, XL1200X, XR1200/X)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

287

ACCELERATE

YOUR SALES

DISPLAY BENEFITS: • P O R TA B L E • CUSTOMERS CAN SEE IT BEFORE THEY BUY IT • I N T E L L I G E N T LY A R R A N G E D & P R O F E S S I O N A L LY F I N I S H E D

THE PERFECT STORM ™ K112531

L.E.D. HEADLAMP K112537

HANDLEBAR ACCESSORIES K112523

GUARDIAN BELLS G K112511 K1

288

MEDALLION GAUGES K112545

PEG TREE K112521

EDGE SADDLEBAGS & BRACKETS K112524

LUGGAGE

ROLLING DISPL AY

K112514

PANACEA K112525

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

289

PULSATING BRAKE CONTROLLER Totally plug & play, with our controller your brake lights automatically pulsate then remain brightly lit every time you apply the brakes. Design also allows easy connection of load equalizers if upgrading turn signals to L.E.D.

K5492 Fits: ’10 and up FLHX Street Glides & ’10 and up FLTRX Road Glide Customs (ea)

K5493 Fits: ‘09 and up Tri Glide, ‘10-’11 Street Glide Trike, ’97 and up

Electra Glides, ’98-’09 Road Glides (except ’09 FLTRSE), ’11 and up Road Glide Ultras, ’06-’09 Street Glides, ’97 and up Road Kings, ’96 and up Softails (except ’08-’11 FXCW/C, ’10 and up FLSTSE), ’97-12 Dynas (except ’09 and up FXDB, ’10 and up FXDWG), ’99-’03 Sportsters (ea)

K5493 8-PIN K5492 6-PIN

Note: Provides 3 seconds of decelerating fl ashing brake lights.

PASSING LAMP ADAPTER FOR H-D

Renderings Shown

L.E.D. RUN-BRAKE LIGHT STRIP FOR TRIKE Add some much needed auxiliary lighting to the rear of your Trike with Kuryakyn’s new L.E.D. Run-Brake Light Strip. Easy to apply & includes plug-&-play wiring harness. The strip is 48” long & can be cut-to-length if necessary for custom installations.

K5051

Fits: ’09 and up FLHTCUTG Tri Glide Ultra Classic, ’10-’11 FLHXXX Street Glide Trike, & Universal Applications on Aftermarket Trike Conversions (ea)

GLOSS BLACK L.E.D. HALO TRIM RINGS FOR PASSING LAMPS PATENT PENDING

Add some extra oomph to your Passing Lamps! Featuring the same grooved trim with bright L.E.D’s you loved with our chrome version, these black beauties sure will get you noticed.

K7271

290

Fits: ‘83 and up H-D Passing Lamps (pr)

Use these plug-&-play adapters to easily install Kuryakyn L.E.D. or any ’05-later style passing lamp on an ’04-earlier H-D motorcycle equipped with spade terminal passing lamp connectors. Fits: Allows installation of ’05 and up style passing lamps on ’04-earlier H-D motorcycles

K5494

Passing Lamp Adapter (pr)

K5495

K5496

TOTAL CONTROL PASSING LAMP HARNESS Take control of your passing lamps! The lamps are no longer automatically turned off when the headlamp is switched from low to high beam. Enabling the passing lamps to remain lit with the high beam greatly improves lighting. A must-have when upgrading lighting to Kuryakyn Phase 6 or Phase 7 L.E.D. Headlamps & Passing Lamps!

K5495 Fits: ’96 and up FLST Models & ’97 and up Road King Models with Passing Lamps (ea)

K5496 Fits: 98 and up Electra Glide, Street Glide, & Trike Models with Passing Lamps (ea)

G R E AT LO O K I N G C O M B I N AT I O N !

K5405

GLOSS BLACK BULLET LIGHT REAR TURN SIGNAL BAR & LICENSE PLATE FRAME Replace your large, stock rear turn signals with these streamlined, bullet shaped turn signals & relocate your license plate below the taillight. Built-in light illuminates the relocated license plate. Single circuit turn signals come equipped with our stylish deep-dish bezels with red lenses. A flat license plate support is included but our Curved License Plate Frame completes this great look (sold separately).

K5405

Fits: ’91 and up Electra Glides, Tour Glides, Road Kings; ’98-’08 Road Glides, & ’86 and up FLST/C/N (ea)

K3143

Gloss Black Curved License Plate Frame (ea)

K3143

LIGHTED MIRROR STEM COVERS PATENT PENDING

Add some auxiliary lighting to your handlebars easily with our new Lighted Mirror Stem Covers. Amber L.E.D.’s provide run & turn function. Chrome plated housings clamp securely to stock mirror stems & simple plug-&-play wiring adapters make connections a snap!

K1757 Fits: ‘03 and up H-D Original

Equipment Tapered, Short-Stem Mirrors (ea)

Rendering Shown

UPDATED! NOW FITS 2012 AND UP MODELS!

INFORMER L.E.D. FUEL & BATTERY GAUGE U.S. Patent 7,652,563 A perfect match to our Flush Mount Gas Cap, The Informer’s sleek, low profile design incorporates both an L.E.D. fuel gauge & an L.E.D. battery gauge. The fuel gauge has a string of color coded L.E.D.’s to indicate fuel level & our patent pending design allows the rider to select the fuel level at which the red “empty” L.E.D. illuminates. Fits: Replaces stock fuel gauge on ’94 and up Road Kings, ’00 and up Softails, & ’91 and up Dynas (except console mounted gauges)

K7282 Informer L.E.D. Fuel & Battery Gauge (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

291

BEFORE

AFTER

PASSENGER BOARD MOUNTS FOR DYNA

The perfect way to add the comfort & style of Kuryakyn Premium or Ribbed Floorboards to your Dyna. These mounts are designed specifically for Dyna Models & eliminate the oddly angled position encountered if installing boards to the stock mounts. The splined interface allows installation of our boards by themselves or our boards combined with our Retractable Passenger Pegs for ultimate touring comfort. Investment cast steel for strength with a black powdercoat finish.

REAR BUMPER ACCENTS FOR TRIKE Dress up your H-D Trike bumper brackets with these awesome Chrome Accents! Not only do these accents cover the welds where the brackets are attached to the tubing, they add a hint of dimensional chrome that everyone will notice! These chrome plated beauties are fitted with molded rubber inserts to ensure a snug, secure fit. Say no to flat & boring, & say hello to chrome!

K7223

Fits: All ’06 and up Dyna Models

K4330 Passenger Board Mounts for Dyna (pr)

Fits: H-D Bumper (Trunk Guard) P/N’s 83825-09 & 83825-09A installed on ‘09 and up FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street Glide Trike (pr)

K4330

PREMIUM GAUGES

OFFICIALLY LICENSED USMC® GAUGES

CLUTCH CABLE ADJUSTER COVER

PREMIUM BAGGER GAUGES

K4672

Fits: ‘96-’03 Electra Glides & Road Glides (kit)

K4673

Fits: ’04 and up Electra Glides, Road Glides (except ‘12 and up FLTRXSE), Street Glides (except ’11 and up FLHXSE), & Trikes (kit)

PREMIUM

5” CONSOLE GAUGES

K4674 Fits: ‘96-’03 Softails, Road Kings, & Dynas with 5” Fuel Tank Mounted Speedometer (ea)

K4675 Fits: ‘04-’10 Softails, ’04 and up Road Kings & ’04-’11 Dynas with 5” Fuel Tank Mounted Speedometer (ea)

• • • • • •

Easy to See Graphics Illuminated Pointers Beautiful L.E.D. Lighting Fog Free Lenses Made in the USA Digital Tach Display (Console Gauge) • All Gear Positions 1-6 Displayed

Dress up your cable with some chrome! Replaces the stock rubber “bellow” boot with a stunning two-piece design. This durable chrome plated steel piece telescopes to adjust to the length of the adjuster, so it’s more compact. The best part is, it doesn’t require any clips or fasteners to hold it in place!

K7259 Fits: ’87 and up H-D Models w/Stock Clutch Cables (ea)

292

BLACK & CHROME MULTI-PURPOSE DRIVER & PASSENGER BACKREST

C H RO M E V E RS I O N P/ N K16 6 0

Patent Pending

A good thing just got even greater! All the same amazing features as the original - Now available in Black & Chrome! • Truly multi-purpose – Provides driver or passenger backrest along with a convenient luggage rack that can be used in either position. • Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest. • Extremely versatile – backrest converts from driver to passenger without tools in seconds. • Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs.

K1661 Multi-Purpose Driver & Passenger Backrest (ea) Note: Mounts sold separately (Below).

FIXED MOUNTS FOR ‘97-’08 ELECTRA GLIDE STANDARDS, ROAD GLIDES, STREET GLIDES & ROAD KINGS

K1663

Fixed Low Mounts: For use with low-profile seats 6” thick or less measured at the front of the passenger seat (pr)

K1664

Fixed Tall Mounts: For use with touring seats more than 6” thick measured at the front of the passenger seat (pr)

K1664

FIXED MOUNTS FOR ’09 AND UP ELECTRA GLIDE STANDARDS, ROAD GLIDES (EXCEPT FLTRU), STREET GLIDES & ROAD KINGS

K1665 Fixed Low Mounts: For use with low-profile seats 6” thick or less measured at the front of the passenger seat (pr) Note: Compatible with stock seats on ‘09-’10 FLHX, ‘09 FLTR, ‘10 FLTRX, & ‘09 and up FLHRC.

K1666 Fixed Tall Mounts: For use with touring seats more than 6” thick measured at the front of the passenger seat (pr) Note: Compatible with stock seats on ‘09 and up FLHR & ‘09 FLHT Standard, ‘11 and up FLHX, ‘11 and up FLTRX.

A L L E Y C AT C OV E R TO U P G R A D E S C R E A M I N ’ E AG L E , B I G S U C K E R , E TC : P/ N K9 4 39

ALLEY CAT AIR CLEANER

This cat is sure to make you purr! We’ve combined our super high-flowing Street Sleeper® II Air Cleaner with our new sleek Alley Cat Cover into one easy-to-install kit! Air flow to support even the largest of engine builds.

K9508 Fits: ’08 and up Touring Models, Trikes, & ’11 and up FLSTSE (ea) K9515 Fits: ’99 and up Twin Cam with CV Carb or Delphi (except ’08 and up Touring/Trikes & ’11 and up FLSTSE) (ea)

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

293

K5035

3” L.E.D. UPGRADE LAMPS FOR DRIVING LIGHTS

TTS MASTERTUNE The most powerful tuning tool available now compatible with ‘11 and up Softail & ’12 and up Dyna! This one tool contains three powerful programs including MasterTune tuning software, Data Master data acquisition & VTune (a self tuning software solution). MasterTune has over 20 tables & parameters to optimize your ECM including air-fuel mixture & timing. (Some early year bikes may have fewer tables) • Adjust for different fuel injector flow rates & engine size

FEATURES

• For ’01 and up Delphi Equipped H-D motorcycles (compatible with CAN Bus Systems on ’11 and up Softails & ‘12 and up Dynas)

• Change factory RPM limit & speedometer calibration

• Tunes your factory ECM - No add on boxes

Kuryakyn’s new L.E.D. Lamps are a direct replacement for the Halogen Lamps included in our 3” driving light kits. Enjoy long life, lower operating temperatures, reduced draw, & color/brightness that closely matches our Phase 6 & Phase 7 L.E.D. headlamps.

K5035 Fits: Replaces H3

• 2-D & 3-D graphing of tables to help visualize tuning maps

• Save & restore original factory calibration

Halogen Lamp Assembly in All Kuryakyn 3” Driving Light Kits (pr)

• Detailed data acquisition aids in tuning & diagnostics

K9225

MasterTune Single Bike Kit - Compatible with CAN Bus Systems (ea)

K9226

MasterTune Dual Bike Kit - Compatible with CAN Bus Systems (ea)

K9227

MasterTune USB Cable Kit (ea) Fits: ‘11 and up Softail & ‘12 and up Dyna with CAN Bus systems (6-pin)

K9228

MasterTune USB Cable Kit (ea) Fits: All Delphi (except ‘11 and up Softail & 12 Dyna) (4-pin)

AFTER

BEFORE

UNIVERSAL

ACCESSORIES

MIRROR MOUNTED MO DRINK HOLDERS & TECH-CONNECT™ DEVICE SYSTEMS

K1798

Keep your handlebars clean & clutter-free with this Mirror Mounted Accessory holder. Drink Holders, Tech-Connect Device Holders, iPhones, GPS systems & more can all be right at your fingertips. This beautiful little chrome piece mounts directly under your mirror stem, providing sturdy support for anything you need to keep close by!

Fits: Universal: Mirrors that mount on top clutch or brake perch mounts (Not suggested for mirrors that mount below master cylinders) H-D: Left Side for all Models with a Cable Clutch with Mirror Mount (except Street Glides or others with Fairing Mounted Mirrors) Yamaha: All Models - Left Side Only (except Venture) & Roadliner, Stratoliner & Raider Left or Right Side

294

Victory: All Models (except Vision) Honda: All Models (Left Side) Kawasaki: All Models - Left Side Only & 1700 Vulcan, Voyager & Vaquero Models - Left or Right Side Suzuki: All Models (Left Side)

K4092

GADGET HOLDERS K4090

K4091

Now an affordable way to carry any device you may want to bring with you on the road! Arkon’s impressive line of holders are the new must-have for techno-driven travelers! All of these options come with a strong handlebar clamp mount that will put you at ease while the variety of different pouches & clamps will sure be enough to fit your device perfectly. Ideal for keeping your iphone, smartphone, or GPS accessible & clean. The safety you can count on with the convenience you love!

K4090 Mega Grip Smartphone Holder with Handlebar Mount (ea)

Fits: Universal for 1” to 1-1/4” Handlebars - Compatible with most Smartphones

K4091 Water Resistant GPS Pouch with Handlebar Mount (ea)

Fits: 1” to 1-1/4” Handlebars Pouch Fits: 3.5” & 4.3” GPS Devices Garmin Nuvi 200, 300, 500, 600, 700, 800 Series GPS Magellan Maestro 3000/400 Series, Crossover, & Roadmate 1000 Series GPS TomTom One, Go, Xl Series GPS

K4092

K4092 Water Resistant Smartphone Pouch with Handlebar Mount (ea)

Fits: Universal for 1” to 1-1/4” Handlebars - Compatible with most Apple iPhones & Smartphones with Screen Size up to 4.3”

Note: For use with included mount only.

G R E AT O P T I O N FOR USE WITH K U RYA K Y N C L U TC H PERCH COVERS ON HONDA MODELS!

Rendering Shown

K1790

DRINK HOLDERS - KITS CONTAIN CHROME MIRROR MOUNT & SPECIFIED DRINK HOLDER

TECH- CONNECT™ DEVICE HOLDERS - KITS CONTAIN CHROME MIRROR MOUNT, SPECIFIED DEVICE HOLDER (except P/N K1799)

K1790 With Beverage Carrier (ea)

K1797

Tech-Connect™ Pouch Kit (ea)

K1791 With Basket (ea)

K1798

Tech-Connect™ Complete Kit (ea)

K1799

Premium Chrome Mount Kit (ea)

K1792 With Stainless Steel Mug (ea) Note: Drink Holder may mount ahead of handlebars on some applications.

Patent Pending Note: Does NOT include Device Holder.

Office: +44 (0)161 337 4390 • Email: sales@mageurope.eu • www.mageurope.eu

295

ROYAL RIDING SEAT PADS

Simply the finest, most comfortable, highest quality pad on the market today. 30-day Satisfaction Guarantee! Constructed with 1/2” advanced viscoelastic molded gel & 1/4” layer of memory foam & covered with either genuine sheepskin or plush neoprene, these covers come in a variety of sizes & styles that will keep you happy - No matter how long your ride.

K5232

SHEEPSKIN

K5225

Small Sheepskin Gel Pad (ea) Fits: Universal Pad Dims: 7”W X 11”L NEOPRENE

K5226 Medium Sheepskin Gel Pad (ea) K5227

Fits: Universal - Pad Dims: 12”W x 12”L: Tapers to 5”W

K5231 Small Neoprene Gel Pad (ea)

Large Sheepskin Gel Pad (ea) Fits: Universal - Pad Dims: 14”W x 11”L: Tapers to 8”W

K5232 Medium Neoprene Gel Pad (ea)

K5228 Large with Tailbone Notch Sheepskin Gel Pad (ea)

Fits: Universal - Pad Dims: 14”W x 11”L: Tapers to 8”W Has Cutout for Tailbone Relief

K5233 Large Neoprene Gel Pad (ea)Fits: Universal - Pad Dims: 14”W x 11”L: Tapers to 8”W

Fits: Universal - Pad Dims: 14”W x 11”L: Tapers to 8”W Has Cutout for Tailbone Relief

16”W x 12”L: Tapers to 9”W

Touring Sheepskin Gel pad Fits: Universal Pad Dims: 18”W x 17”L

NEOPRENE OR SHEEPSKIN PREMIUM COVERING

Fits: Universal - Pad Dims: 12”W x 12”L: Tapers to 5”W

K5234 Large with Tailbone Notch Neoprene Gel Pad (ea)

K5229 XL Sheepskin Gel Pad (ea) Fits: Universal - Pad Dims: K5230

Fits: Universal - Pad Dims: 7”W X 11”L

K5235 XL Neoprene Gel Pad (ea)

Fits: Universal - Pad Dims: 16”W x 12”L: Tapers to 9”W

K5236 Touring Neoprene Gel Pad (ea) Fits: Universal

MEMORY FOAM

Pad Dims: 18”W x 17”L

1/2” GEL 2 LAYERS OF FOAM INSULATION

BLUETOOTH SOUND OF CHROME™ Get the same great full-bodied sound & quality that the Sound of Chrome is known for, now with NEW Bluetooth capabilities! Listen to music with your iPod connected to the speakers like before or listen to them without having to worry about wires! 3” main speakers feature additional tweeters for full bodied sound, while the weatherproof bullet housing has powerful built-in true 50 watt amplifier & includes a volume & on/off control switch. Convenient swivel adjustment gives you the freedom to position speakers in any direction you choose. Note: Bluetooth

K834

Fits: 1” Handlebars (set)

Mount & clamp shown sold separately

K835

Fits: 1-1/4” Handlebars (set)

K834

function is for listening to music only-Does not work for answering phone calls.

PREMIUM MINI BOARDS K4392

Do you find that foot pegs are lacking in support, but don’t want the bulkiness of a foot board? Kuryakyn has the perfect solution! Introducing our newest innovation, the Premium Mini Board! This compact board combines the size & convenience of a peg with the comfort of a full sized floor board!

3 MOUNTING OPTIONS

These 5 ½” long & 4” wide beauties were styled to complement our Trident Pegs & Premium line of boards & board inserts, so you can still ride in comfort without sacrificing style. They also utilize splined adapters, so the mini board can be positioned forward, back, or center at almost any angle. Also a great option for Driver Cruise Pegs!

K4392 Premium Mini Boards, Male Mount (pr)

Fits: All H-D Style Male Mount Peg Applications (except ’11 and up XL1200C, ’10 and up XL1200X, ’12 and up XL1200V)

FOR THOSE WHO ARE LOOKING FOR MORE SUPPORT THAN A PEG WITHOUT THE BULKINESS OF A BOARD!

296

K4393 Premium Mini Boards without Adapter (pr)

Requires Model Specific Splined Footpeg Adapters (Sold Separately)

Note: Ensure proper clearance before installation in driver position.