Lumbermens July 2019 Magazine

F R E E

E Q U I P M E N T

L I S T I N G S

ALBACH DiAMANT “Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2nnn

‘93 Barko 180B Logging and tree care equip�ent ne,ct level ‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

• Independent differential lock • Permanent 4-wheel drive system • Smart engine & hydraulic cooling ‘95 John Deere C6 management Farmer • Albach Trac - GPS, Tree data and diagnostic Item ID: 13920 system

Contact: Austin ‘13 KMC 2500 Track ■ Cab lift with rotatable seat 180 degree Ph: (888) 401-6367 x703 Skidder

• 270 degree spout rotation

Item ID: 14078 3 • High throughput capacity!. - up toItem 400IDm13421. /h Sam x702 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

• Ready to chip in less than 30 seconds BARKO Barko 160B - Electric • Best chip quality1994 in its class

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

• Unmatched low-fuel motor, Rotobec continuous consumption

well built processor. Item ID 13820.

(excellent condition.). Item ID

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Albach Northamerica

 Issue 364 385

a Chomper Model 16 PDA

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work!

Remote control. Big production

sales@albach.us

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has aCTR .- -�

-.�

-�-·...

-. rebuilt. ·, �,--:delimber, grapple has been

: ..__ :-,{: �:if::_� ·'.-....

Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

1990 Bell Super T - This Bell has

a brand new Duetz engine. Lever

control, 33” bar, pump and tranny

1-(978) 939-9111

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 3

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

heavy duty log turner under log

loading system,. Item ID 12764.

logs onto carriage and track and

State

frame. Significant new spare parts

to be negotiated separately. Item ID

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

DEPARTMENTS The Tree that Started it All!

Trelan Chipper - This is a remote

chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

all steel carriage. Husk. Manual

clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

'12 WoodmIzer LT 40 SOUTHWEST

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

EquipmEnt REpREsEntativEs

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

Free Equipment Listings...........6 Company Name*

❑ Please add

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES fREE EquipmEnt listings! Call –E L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

Escanaba, BUY SMichigan AVE

Phone

Address

Individual Name

Deals of the Month..................16 EST 1986 MID-ATLANTIC LOGGING & BIOMASS LIST

SELL

EXCHANGE

Morris Woods

item id: 14061 contact: Austin x703

2012 JoHn deere 548G3 Fri,

AD Sales

401-6367 15 Sept - Sat,(888) 16 Sept

Selma, North CarolinaExt. 704 Ad Directory..............................38 www.midatlantic-logging-biomass PUBLISHER

*Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

expo.com/

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Mark Laxton Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 708

FAbTeK 344b

THE PAULmark@lumbermensco.com BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging, sawmilling, pallet Donna Heninger manufacturing, and secondary wood manufacturing industry, is free within the United States item id: 14061 to qualifying manufacturers and industry suppliers. Please limit your subscription tox701 one free contact: J Williams EQUIPMENT REPS copy per company or mill location.

✁

Sam Wall For classifieds CHANGE OF ADDRESS: Send address changes to Lumbermens™ Magazine, P.O. Box 1916, (888) 401-6367 ext. 702 Columbia, TN 38402. When possible, please include an old address label. Call toDay sam@lumbermens.co

(888) 401-6367 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible for the contents and claims of their advertising. Austin Woods Lumbermens™ accepts no responsibility for their claims. No  Issue lumbermenS  Since 1986 in ❘ any form  liSt  Sell part of this364 publication may be 703 reproduced or transmitted or by any means,  (888) 401-6367 ext. electronic or mechanical, including photocopying, recording or any information storage austin@lumbermens.co retrieval system, without permission of Lumbermens™. Negatives, artwork, and other items submitted for publication in Lumbermens™ are the property of advertiserQs. Lumbermens ™ MAILING ADDRESS owns material typeset and/or designed by Lumbermens ™ and reserves the right to its use B & B Mfg. ............................... 18 P.O. Box 1916 outside of Lumbermens™. Lumbermens™ will exercise every precaution in writing, designing, Columbia, TN 38402-1916 and printing material contained within. We shall not be liable for omissions or typographical B. H. Payne .............................. 16 errors. (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

(888) 401-6367

exchange  buY  Save

❘

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876. Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext. 702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

PUBLISHER Woods Publishing

Ted Schultz

(888) 401-6367 Ext. 701

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25 Ted Monnin

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and Since 1986, associates, areLumbermens™ not held liable for has published a monthly circular errors or omissions. Reproduction, reaching sawmills, loggers, with pallet in whole or part, is prohibited makers, recyclers out written consent. and industrial woodworking plants worldwide. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17 MAILING ADDRESS

Rotochopper............................ 40

The Tree that Started it All!

Chris Woods

that go up and down, with airbags,

Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Reduced PRice item id: 14021 contact: Sam x702

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

morris@lumbermensco.com

MID-ATLANTIC

LOGGING & BIOMASS EXPO

machine, with air strain conveyers

DESIGN DIRECTOR

P.O. Box 1916 CW Mill-Hogzilla ................... 15 Columbia, TN 38402-1916 (888) 401-6367 Dyna Products ........................ 35

teds@lumbermensco.com

Demi

Row Electric ............................ 20

Laxton

Sawmill Exchange .................. 11

(385) 335-4225

Empire ................... 8 ADHydraulics SUBMISSIONS

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

May be sent to— morris@lumbermensco.com

POSTMASTER Hurst ............................. SendBoiler address changes to: 14 Lumbermens™ Magazine Iron BullP.O. ................................... 21 Box 1916 Columbia, TN 38402 Kilgore Saw ............................. 22

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Demi@lumbermensco.com

Thomas Industrial Controls..... 10

Will

Union Grove Saw & Knife.. 2, 37

Keene

Universal Refiner ................... 23

(661) 900-7726

WoodMizer ................................ l

Will@lumbermensco.com

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

sawyers cab, computer controls, Sam Wall

(888) 401-6367 Ext. 702

48" bottom saw and 36" top saw sam@lumbermensco.com

STACKING RAC

Fernanda

McDermott

(801) 699-8784

fery@lumbermensco.com

Wes Graber (888) 401-6367 Ext. 710

www.BakerProducts.net

Wes@lumbermensco.com 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com FREE EQUIPMENT LISTINGS, Email CALL “Precision Under Pressure” info@empirehyd.com

BANDMILLS & HEADSAWS

DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down,

(888) 401-MENS

with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in very good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

CARRIAGES & DRIVES

2010 CARDINAL HD CARRIAGE CARRIAGES Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48” bottom saw and 36” top saw, short pop-up transfer to edger, belted rollcase to clear slabs and cuts from sawline, log 13428 Victory Ln. // PO Box 124 stop and loader to drop logs onto Adams Center, NY 13606 carriage, heavy duty log turner under log stop and loader to deal with big logs onto carriage and track and frame. Item ID 13198. Sam x702

‘83 John Deere 4850

‘93 Barko 180B

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

** INFO LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

used

or a

wer

ill

CHIPPERS

DRY KILNS Phone PRECISION 58 CHIP PAC315.284.4126 MEC 12 X 38 Fax Single chute loading system. 315.849.2045 TRIPLE PASS DRUM DRYER Item ID 12764. Sam x702 Website Comes with trunnions, drum www.empirehyd.com COMPLETE SAWMILLS drive, fan and cyclone. Email “Precision Under Pressure” info@empirehyd.com Item ID 13925. Austin x703 2006 WOODMIZER LT300

This mill is currently running, and includes the sawmill, and cab. An incline conveyers, a transfer table and two sets of roller tables. This mill saws a million board feet or more of walnut every year. Max log diameter 36in, Max Width of cut 25in, The width of the band is 1 1/2 Inches. Video of it operating is available, and can be sent upon request. Item ID 13892. Austin x703

MEC 12 X 42 TRIPLE PASS DRUM DRYER 12 x 42 Mec triple pass Drum Dryer, comes with trunnions. Item ID 13924. Austin x703 DYNAMIC CHIPPERS

2004 JCB 441 WHEEL LOADER 3,509 hours on this machine, everything works as it should. I have many videos available of it running, and can be sent upon request. Item ID 13888. Austin x703

2008 DYNAMIC 585 CHIPPER This is a 2008 dynamic cone head chipper with 1700 hours, in very good condition. Easily produces high quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. ‘16 H140 ItemHalverson ID 13882. Austin x703 FIREWOOD PROCESSORS Skidsteer (DEMO)

SHOP BUILT Item 2010 ID: JW-909632 WOOD PROCESSOR Contact: J Williams ItPh: has(888) a 353401-6367 Detroit diesel, 40 inch x701 insert tooth circle saw, 30 foot chain conveyer, 8 way splitter, on 20,000lb goose neck trailer. Item ID 13916. Austin x703

LOGGING EQUIPMENT Tree Farmer

PIPER’S Saw Shop

off onto a conveyor. This is a very

BANDIT Item ID: 13920 Contact: Austin BEAST 2004 BANDIT Ph: (888) 401-6367 MODEL 4680x703 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in good condition. finished 10 capacity!. Item ID Just 13421. Sam x702 Acre clearingBARKO job, ready to work! Remote control. Big production 1994 Barko 160B - Electric capacity! knuckleboom, 30' boom, Item ID 13421. Sam75hp x702

Sam x702

grapple, 5,000BARKO original 160B hours. 1994

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

well built processor. Item ID 13820.

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

with John Deere power unit with

tach, oil pressure, water temp and

good. in goodBELL working order. 1990 SUPER T 22in

a Chomper Model 16 PDA

automatice firewood processor

low hours. Control panel includes amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at

Well maintained. Item ID 13294. 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

good condition. Just finished 10

Acre clearing job, ready to work! Remote control. Big production

 Issue 364 1986 385 Lumbermens List exchange itbuy  to save arch with winch. Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

22X380, direct drive, EROPS,

engine. 33” bar, pump Item ID Lever 13185.control, Sam x702

and tranny has been rebuilt not long ago. Hour meter is inop. New paint. approximately 1500 hours. Hour Runs perfect. Has heat and air, it meter dontto work. The last 2 owners just needs be fixed. have onlyID used it to load Item 13896. Samtrucks x702or 1999 Barko 160D - new engine with

as a backup as needed. Has a CTR

CUMMINS continuous grapple.

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

kohing head. works great. This Bell hashead a brand new Duetz

Sam x702

but electronic option is available.

adjustable to single two way. Great

on injection pump. BELLalways started

Diesel. 7500 Hours. One owner.

1999 Bandit 1900 Tracked Disc

Has Log Lift. Uses 4-way wedge

Electric condition.). knuckleboom, (excellent Item ID

1993 BELL SUPER T Good running condition. 33” Boom cylinders have minor leaks. Bar Saw. Tires at 50%. Deutz Item ID 13694. x702 engine. Hour Sam meter broken. 94 Barko 27513543. - Excellent value Item ID Sam x702

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

motor, Rotobec continuous BARKO

30’ boom, 75hp motor, Rotobec 13238. Chris x700 continuous grapple, 5,000 origi1995 Barko 775 B Feller Buncher nal hours. (excellent condition). - Pumps recently redone. hrs Item ID 13238. Chris400 x700

Firewood Processor - This is

Promotional Pricing Offer

‘83 John Deere $14.27 4850 $14.71

FIREWOOD PROCESSOR This is a homemade processor with a 10’ log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power unit. Has a 4’ chain saw that kicks off onto a conveyor. This is a very ‘93 Barko 180B well built processor. Item ItemID: ID14077 13820. Sam x702 Contact: Austin Ph: (888) 401-6367 x703 FIREWOOD PROCESSOR This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. ‘95 John Deere C6 Item ID 13865. Sam x702

job site and put it to work to up

delimber, grapple has been rebuilt.

with low at hours at 3,500. 5.9

BELL TREE CUTTER Around 1000 hours on the Runs Great!. Item ID 13740. Sam machine. New air cooled motor x702 only about 300 hours. Rebuilt BELL Several bars dangling head. and chains. Machine came 1990 Bell Super T - This Bell has off the job in February and is field a brand new Duetz engine. Lever ready. control, 33” bar, pump and tranny Item ID 13943. Austin x703 ❘

 LumbermensCO.com

BELL’S FIREWOOD FIREWOOD PROCESSORS PROCESSORS

• Single Joystick Control • 30 Ton Splitter Cylinder

** CALENDAR** BELL’S FIREWOOD PROCESSORS

CASE

Many Models & Options to Choose From!

• 67 HP CAT •Diesel 4000SERIES SERIES FOR CLASSIFIEDS 67 HP CAT Diesel 4000 2006 CASE 440 SKID LOADEREngine Engine FIREWOOD TUMBLER Call 888.401.MENS • 44” Circular Saw • 44” Circular Saw With only 871 hours, this machine • 20” Diameter • Sturdy HSS Steel Welded • 20” Diameter starts, runs, and operates like FIREWOOD TUMBLERprices, and See pictures, NY STATE Barrel WOODSMEN'S FIELD DAYS Capacity • Sturdy HSS Steel Welded new. I have many videos availableCapacity • Single Joystick• 4’ Diameter Fri, 18 August to - Sun, 20 August Many Models Options Choose From! 4000 •SERIES 4’ Diameter Barrel Location of all equipment at • HP CAT Diesel • Single Joystick 4000 • 67 67Control SERIES • Clean Out& Chute and can be sent upon request. Control Engine • Clean Out Chute Boonville, New York •Engine 30 Ton Splitter www.LumberMB\ISmagazine.com • Removes Debris & Bark as large as 2 ¼” • Removes Debris & Bark as large as 2 ¼” Item ID 13886. Austin x703• 30 Ton Splitter • Circular Saw • 44” 44” Cylinder www.starwebhosting.net/woodsmen/ • Works with all of our Double chain Hydraulic • 20” Diameter • 20” • Works with all of our Double chain Hydraulic Lift conveyors Cylinder • Optional Honda Power Pack Available Capacity Capacity BANDMILLS & HEADSAWS 99’ CASE 850G LONG TRACK DOZER • Optional Honda PowerPRODUCTS Pack Available SOUTHWEST FOREST EXPO • Single Single Joystick • FIREWOOD TUMBLER One owner machine, only Danckaert Band Resaw - Roughly Fri, 25 August - Sat, August Control Control • Sturdy HSS Steel26 Welded Diesel 4000 SERIES Thehours, Treehas never• 67 HP CAT 3300 original • 30 • 30 Ton Splitter 10 hours on this machine since it Hot Springs, Arkansas • 4’ Diameter Barrel Engine Cylinder Cylinder that Started Clean Out been used in the woods, it has• 44” Circular Saw Many Models www.arkloggers.com &•Options toChute Choose From! has been rebuilt, it has a 24foot in • Removes Debris & Bark as large as 2 ¼” a ripper on the back, original• 20” Diameter it All! • Works with all of our Double chain Hydraulic Lift 20 conveyors feed deck foot out feed deck Made In ANNUAL GREAT LAKES pads, and chains, Under carriage Capacity • Optional Power Pack Available Many Models &72ND Options to Honda Choose From! Canada • Single Joystick with 44 inch wheels, and all the has on LOGGING & HEAVY EQUIPMENT EXPO isSince new 1986, along Lumbermens with new rollers Control published monthly Thurs,FIREWOOD 7 Sept -TUMBLER Sat, 9 Sept the bottom,aand new circular sprockets.• 30 Ton Splitter bells and whistles, its a production reaching loggers, Escanaba, Michigan Item ID sawmills, 13909. Austin x703 Cylinder • Sturdy HSS Steel Welded machine, with air strain conveyers pallet makers, recyclers and Many Models Choose From! • 4’ Diameterto Barrel Many Models & Options to Choose From! CATERPILLAR Made& InOptions Please Call for Details that go up and down, with airbags, industrial woodworking plants • Clean Out Chute Canada MID-ATLANTIC LOGGING BIOMASS • Removes Debris & & Bark as large as 2 ¼” 1994 CATERPILLAR 320 FIREWOOD TUMBLER worldwide. it includes two sets of Mcdonough Works all 16 of our Double chain Hydraulic Lift conveyors Fri, 15•Sept -with Sat, Sept • Sturdy HSS Steel Welded Dry machine that is in good In Power Pack Available • OptionalMade Honda PUBLISHER pressure guides. Top Casting wheel • 4’ Diameter Barrel Selma, North Carolina or Canada visit us online www.bellsmachining.com conditionWoods for the Publishing year. The stick and • Clean Out Chute www.midatlantic-logging-biomass is supported on both sides. This Financing Available FIREWOOD TUMBLER bucket cylinder have been repacked. MID-ATLANTIC FIREWOOD TUMBLER • Removes Debris BarkWelded as large as 2 ¼” ADVERTISING SALES ManyEXPO Models & Options to Choose From! expo.com/ LOGGING & BIOMASS • Sturdy HSS&Steel is an extremely accurate machine It has a thumb and bucket on it, Sturdy Steel Welded • Works••with all HSS of our Double chain Hydraulic Lift conveyors Morris Woods 4’ Diameter Barrel • 4’ Diameter Barrel also has a 230 Waratah processing in ve1y good condition, Cuts 130 • Optional Honda (888) 401-6367 ext. 704 • Clean Out Power Chute Pack Available KENTUCKY WOOD • Clean OutEXPO Chute Call for Details head morris@lumbermens.co that can be sold withPlease it. • Removes Debris & Bark as large 2minute ¼” Please Call Fri, for Details feetasaas 15 Sept - Sat, 16 Sept& Bark as large • Removes Debris 2 ¼” also has CLT presses. • Works with all of our Double chain Hydraulic Lift conveyors Hours are around 19k, motor has Made In Works with all ofPower our Double chainID Hydraulic Lift conveyors MARKETING DIRECTOR Item 13876. Austin x703 Lexington, Kentucky ••Optional Honda Pack Available Canada been replaced a couple years back. FIREWOOD•TUMBLER Optional Honda Power Pack Available John Williams http://www.kfia.org/ S & W 125 Band Mill with • Sturdy HSS Steel Welded Machine is working daily. or visit us online www.bellsmachining.com (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx • 4’ Diameter Barrel Caterpillar generator - Low hours Item ID 13936. Austin x703 j@lumbermens.co

1-888-995-1965

1-888-995-1965 1-888-995-1965

or visit us online www.bellsmachining.com Financing Available • Clean Out Chute on the mill, electronic computer Set • Removes Debris & Bark as large as 2 ¼” DESIGN DIRECTOR Financing Available THE PAUL BUNYAN SHOW 1994 CATERPILLAR Please Call• for Details Works with all of our Double chain Hydraulic Lift1/2" conveyors Donna HeningerD4 HI works,1 or 2" band, 22ft. track

TRACK WITH GRAPPLE This is EQUIPMENT an extremelyREPS low hour Sam Wall dozer/skidder with only 2800 (888) 401-6367 ext. 702 actual sam@lumbermens.co hours. Comes with new 30” pads and chain. Undercarriage Austin Woods is still in excellent shape. Fixed (888) 401-6367 ext. 703 grapple and no winch. austin@lumbermens.co Item ID 13932. Sam x702 MAILING ADDRESS

Fri, 6 Oct -Made Sun,In 8 Oct

• Optional Honda Power Pack Available Canada 1-888-995-1965 Cat 3406 140KW Genset, 12,400 Cambridge, Ohio

Made In www.ohioforest.org or visit us online www.bellsmachining.com Canada Made In Canada Financing Available

hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES Shrink Wrap Please Call for Details ** INFO LINK** FireWOOD/WaSteWOOD 1-888-995-1965 2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

Please Call for Details Made In Canada Please Call for Details

M&F Gauge ............................. 28 1-888-995-1965 1-888-995-1965

Carriage line it includes carriage

or visit us online www.bellsmachining.com 1996Columbia, CAT 214 MOBILE EXCAVATOR TN 38402-1916 B. H.or Payne .............................. 16 Meadows Mill, Inc. ................ 33 visit us online Available www.bellsmachining.com with 36’ (888) magnet 3 tons steel Financing 401-6367 or visit us online www.bellsmachining.com shear. low hrs! All hard tires, Financing Available Saw ..................... 29 Baker ...................................... 5, 7 Menominee AD SUBMISSIONS 4 outriggers ideal for scrap PleaseFinancing Call for Details Available May be sent to Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 business. It also has 48’ swavel morris@lumbermens.co bucket for street ditch clean up. Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Item IDPOSTMASTER 13441. Sam x702 or visit us online www.bellsmachining.com P.O. Box 1916

B & B Mfg. ............................... 18

with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for

1-888-995-1965

Send address changes to: Lumberman's Exchange 1998 CATERPILLAR P.O. Box 1916 515 GrappleColumbia, with winch, no heat or TN 38402

air. Open cab skidder with 9800 The Lumberman's Exchange is 90% hours. Tires are 28L’s, rear published monthly by Woods and fronts P.O. areBox 30% Publishing, 1916,with new bear paws chains. Columbia, TN 38402. All rights reserved. All13801. editorial/ advertorial Item ID Sam x702

submissions are used at the discretion of the publisher and may 525B be2005 editedCATERPILLAR for purposes of clarity This is a dual arch skidder with and space. Although all efforts have been made to ensure of winch. Very low accuracy hour skidder content submitted by advertisers with 7900 frame hours and and writers, the Lumberman's only 63 hours on a new Exchange, its principles and engine. Continuous grapple, tires associates, are not held liable for are errors or Reproduction, 30.5’s @omissions. 70%. This is a really in whole or part, prohibited nice skidder foristhe price. with out written consent. Item ID 13816. Sam x702 ©2017 Woods Publishing

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

carriage knees, husk including 48" bottom saw and 36" top saw

Sell Your WOOD – $300/cord or More!

Available Corley MfgFinancing .............................. 32 Multitek ................................... 12

STACKING RAC

Double or triple your profits by shrink wrapping wastewood - foreCW Mill-ArmorHog .............. 17 Rotochopper............................ 40 wood with WOOD-PAKer! Attractive various size packages can be CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 obtained with our high production, easily operated and affordable Dyna Products ........................ 35 Sawmill Exchange .................. 11 machines. Eight machines available. The ideal equipment for producEmpire Hydraulics ................... 8 Select Sawmill ......................... 19 ing square bundles-palletizable for ease in storage and transporting. Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 Inquire for free details. Video and Package samples at nominal fee.

B Boiler & B............................. Manufacturing • 3007 WestControls River Hurst 14 Thomas Industrial .....Road 10

• Olean, NY 14760

Toll Free 1-800-654-5320

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l E-mail: bbmfg@verizon.net • Web: www.bbmfg.org 800.S48.6914 I S73.663.7711

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 9

‘97 36

Ite Co Ph

Joh

Item Con Ph: Has

mou

Com

ID 13

2015

“Precision Under Pressure”

Woodmaster See why we are your BeSt Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

thIn Kerf Band saw Blades Ask About Our Dismanteling Blades 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 ck Cheut Our O

1-888-857-5153 Quality • Our Service • Our Price

Now One Phone Puts You in Touch with ThE Single Source for all your Sawmill Needs! ‘93 Barko Corley Sawmill maChinery

180B

‘16 Halverson Item ID: 14077 TyroneH140 Berry Carriage DriveS Contact: Austin lewiS ConTrolS opTimizaTion Skidsteer (DEMO) 84/85 John Deere

Ph: (888) 401-6367 x703 Item ID: JW-909632 Carriage Linear 440B/C & Set Shaft Contact: J Williams Lewis Controls “Electronics forItem sawmills by sawmillers” ID: 13908 Ph: (888) 401-6367 x701 Tyrone-Berry Carriage Drives &Contact: Parts • Headrig Sam Slabbers Log Turners • Bandmills & Linebar Resaw Systemsx702 Ph: (888) 401-6367 Wood-MizerBoard LT40 & Gang Edgers • Trimmers

Item ID: 13995 Contact: Austin The Most Complete Line of Sawmill Ph: (888) 401-6367 x703 Machinery Since 1905!

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 x703

Call (423) 698-0284 ‘90 Bell Super T CORLEY

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO Item ID: 13896

www.corleymfg.com • sales@corleymfg.com 1994 Barko 160B Contact: Sam- Electric

off onto a conveyor. This is a very

‘89 Timberjack 380A well built processor. Item ID 13820.

Ph: (888) 401-6367 knuckleboom, 30' boom,x702 75hp motor, Rotobec continuous

KENTUCKY WOOD EXPO Contact: Austin Firewood Processor - This is Ph: (888) 401-6367 x703

Contact: Austin Item ID: 14011 Ph: (888) 401-6367 x703 Contact: Austin Ph: (888) 401-6367 x703

Masterson Staon Park, Lexington, KY

with 1700 hours, in very good

condition. Easily produces high x702 quality chips with patented ‘Cone’ 2004 AxCan 470easily - Thisload cutter drumHydro design. 42’

has 7000 hours. It’s a clean vansaround and produce 6 - 8 loads per

made the best valued log splitter. HydroAx 611Bup- New injectors, Handles logs to 32”. Uses injector pump.motor. New 5.9 cummins 13HP Honda Manual start

engine. Rebuiltoption hydraulic pump but electronic is available.

For More Information On Exhibiting or Attending:

and reason day. tight Item machine. ID 13882. Only Austin x703

a Chomper Model 16 PDA

grapple, 5,000 original hours. John Deere Dual Arch Grapple, (excellent Item4000, ID John Deerecondition.). winch, Model

13238. Chris x700 Cummins Engine, Model 6BTA, 1995 Barko 775 B Feller Buncher Clark Transmission 28000. Item ID - Pumps recently redone. 400 hrs 13738. Austin x703 on injection alwaysMill started Frick #1pump. Jumbo

automatice firewood processor 13799. Sam x702 Item ID: JW-986495 with John Deere power unit with 1998 Hydro Ax 611EX Saw Head Contact: J Williams low hours. Control panel includes KOMATSU Feller Buncher - with about 8800 Ph: (888) 401-6367 x701 Item 13957 Sawmill, Pallet, Logging & good. inID: good working order. 22in tach, oil pressure, water temp and 2007 Komatsu PC220LC w/2009 hours. Bunching Saw Head has Contact: Austin kohing head. Chain head workssaws, great. amp gauges. Cuts logs up to 16”. Loaders, Secondary Equipment, large pocket for accumulation and Log Max 7000XT processing head. Ph: (888) 401-6367 x703 Item ID 13185. Sam x702Equipchain conveyer, 8 way splitter, on Trucks, One owner and comes with all Item ID:Parts, 13840 Accessories, New & Used lifting side shield for notching 9700 hours on carrier. 7200 hours Contact: 1999 Barko 160D - new engine with 20,000lb goose neck trailer. Item ID manuals andSam receipts. Purchased ment, and Much More! larger trees before felling. on Log Max.Counter Excavator style. Cab Ph: (888) 401-6367 x702 Item ID: 13855 tires @ 90%, Weight, 6 approximately 1500 hours. Hour 13916. Austin x703 new for $32,500. Item ID 13865. Contact: Sam guard. Flotation pads. One owner. Cummins engine. 28L tires at 60%. cylinder Cummins Diesel meter dont work. The last Engine. 2 owners Best Value Portable Log Splitter Sam x702 Ph: (888) 401-6367 x702 Decent running Item ID Very condition. Item ID have good only used it to load trucks - Small manufacturer in PA has LOGGING EQUIPMENT FOB:Okeechobee, FL. Item ID or installed as well condition. as new master

September 20 ‘08 John Deere CT332 & 21, 2019

‘83 John Deere ‘06 Western Star 4850 Item ID: 14073 Michigan Special

Featuring the Latest Technology & Services for: ‘14 CAT 535C

TICKETS:

Adults -clean $5andintightadvance, atHas a CTR 13464. Sam 13245. SamVery x702 as a backup as$7 needed. BANDIT 13090. Sam x702 x702 cylinders. 2002 Ax 621E - Arouund 2008 Komatsu D61-EX delimber, grapple has been rebuilt. 1999 Hydro Bandit 1900 Tracked Disc 1994 Timberjack 450C -Dozer Grapple machine. Item ID 13885. Austin gate; 6 & under Free 12,000 hours this machine. -Boom Greatcylinders Condition. 4511 Hours. have minor leaks. Chipper - Caton Under Carriage at x703 Working daily.475 Item 13884. 50% or better. hpID Cummins 1993 Timberjack 1010 Forwarder

EVENTS:

with winch, new transmissiion and Komatsu U/C at 95%. 35% Pads. 6 Item ID 13694. Sam x702 hydraulic pumps. Item ID 13826.

and teeth.Uses Item4-way ID 13768. Sam Live Way Blade. Enclosed comfort x703 94 Barko 275Fully - Excellent value Diesel. 7500 Hours. owner. Has new Log Lift. wedge Sam x702 -Austin 16,000 hours. GoodOne running Demonstrations of Machinery & Equipment– withGreat low atprice!. hours240D at 3,500. 5.9 & upgrade. GANGS Item adjustable to single two way. Great Inside Well maintained. ItemExhibits ID 13294. selling isEDGERS due to an x702 cab. Item ID 13570. 1998 711EX Head Feller & Outside 1997 Timberjack - This condition. 6Saw wheeled. Tracks for CUMMINS continuous grapple. Brewco Saws Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Sam x702 ID 13846. Sam x702 1999 Hydroax 511EX - New Sam x702 Buncher - 30.5-32 tires at skidder comes with 23.1 X 26 rear bogies andContests chains for40%; front Lumberjack Runs Great!. Item ID 30% 13740. Sam in excellent condition. Runs great. Firewood Processor This is a 2004 Bandit Beast Model 4680 2004 Hydro Ax 670 Engine has cummins engine with only 1500 2012 Komatsu D61EX 15 Dozer Cummins Engine rebuilt 1500 tires at 95% rear and front. tires. Item ID 13446. Sam x702 Kentucky Forest Industries Associaon Chain Saw Carving x702 only Item 106 ID 13644. Sam x702 3412 Timberjack Caterpillar Diesel engine homemade processor a 10’ about 500 hours, new saw motor hours. Caterpillar just with replaced hours ago; 8750 hours; Quadco with Hours. Triple and New brake750 bands in winch 1993 380B PG Highlift Progress Drive

BELLwasEnclosed withLarge 850 HP. 5300 Mill in and log deck. Has a hydraulic grapple, &tree Knuckleboom Contests andFIREWOOD disc last year.PROCESSORS Previous owner gear box to hydraulics at the end Skidder 22” sawhrs. head. Heat Rippers; Limb Sweeps; Frankfort, KY 40601 good cable. Engine rebuilt 2 Tree Trimmer, s/n CM4478, 2010 Shop Built Wood Processor 1990 Bell Super T This Bell has chain and kicker that all runs off good condition. Just finished 10 Tel: 502/695-3979 Fax: 502/695-8343 had the hydrastats redone. This of summer. 11000 hours total on cab with Heat/AC; 6 way blade; A/C work. bearings in in saw. years ago. Good strong running 5,152 hours,New Delivered New Continuing Education for Loggers & Landowners - It has a 353 Detroit diesel, 40 a brand new Duetz engine. Lever Acre clearing job, ready to work! of a 4 cylinder Mercedes power machine. Item ID 13917. Sam x702 1995, Cab with A/C,Item 5 blades, has awww.kywoodexpo.com 22” high capacity head and is cutter. Tires are 28L’s @ 80%, 2 Undercarriage at 90%; Excellent Cutting trees today. ID 13353. inch insert tooth circle saw, 30 foot a very clean machine. Mounted on

Ite Co Ph

‘95 John Deere C6

Item ID: 14039 Sam x702

‘05 Gehl CTL 70

‘0 74

Single Machine or Complete Turn-Key Operation More Production & Profit isTree Only Farmer One Call Away Item 13920 For Parts, Service & ID: Sales

mfg

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value

Live Bluegrass Music and much more control, 33” bar, pump and tranny Remote control. Big production unit. Has a 4’ chain saw that kicks 1998 Timberjack Cable Sam Skidder 75 reach, @ 40% and one slick. Brand new Condition!. Item 360 ID 13459. Sam x702Branton Winch, Push

20 64

Ite Co Ph

only

secti

elec

Item

1998

Con

REA

2001

sing

6800

low

engi

load

be g

engi

2005 as a

1200

dua

X 32

Exce

Sam

2005 has

und - This is an excellent skidder with Blade, 4X4, Firestone KMC 67X34.00/26 x702 34’s with 50% tread. Item ID 13828. center section. 20” single post  Issue 364 ❘ 385 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com KMC Track Skidder 2500P Sam x702 head. Heat and air work. Item ID 2014 Komatsu 450 - Only 1100  Issue 364 Lumbermens  since 1986 ❘  List  seLL  exch

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

REPUTATION IS IMPORTANT

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

** INFO LINK**

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

MAKE A MISTAKE, CHOOSE ADDON’T SUBMISSIONS

May be sent to morris@lumbermens.co

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

CRD Metalworks .................... 25

The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have OPTIONS AVAILABLE: Hahn Machinery ...................... 3 been made to ensure accuracy of Electronic Setworks | Digital Readout content submitted by advertisers Hurst Boiler Hold ............................. 14 Hydraulic Powered Down and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with Lignomat ................................. 24 out written BakerProducts.net Y E consent. ARS ©2017 Woods Publishing

PAQ I

RESAW

TIME PROVEN

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

DON’T BE FOOLED Piper's Saw BY Shop.................... 13 A LOOK-A-LIKE STACKING

Rotochopper............................ 40

Row Electric ............................ 20

RAC

FACTS: THE FIRST-ORIGINAL DESIGN Select Sawmill ......................... 19 TIME PROVEN: 1999 to present PAQ II Smith Sawmill ........................... 4 PROUDLY MADE IN THE USA RESAW The Paul Bunyan Show ......... 39 #1 RESAW MANUFACTURER Thomas Industrial Controls..... 10 THOUSANDS OF SATISFIED Union Grove Saw & Knife.. 2, 37 CUSTOMERS Sawmill Exchange .................. 11

Universal Refiner ................... 23

www.BakerProducts.net WoodMizer ................................ l 800.548.6914 573.663.7711 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 11

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Woodsmen's Field Days Email August 16-18, 2019 info@empirehyd.com Boonville, NY

30+ Years Strong!

‘16 Halverson H140 Skidsteer (DEMO) From Price To Performance, We’re A Cord Above The Rest!

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Portable • DePenDable • low Maintenance

888-SPLITTER (888-775-4883)

blockbuster-inc.com

100

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Sch Gr

Ite Con Ph

 Firewood Processors: 8 Models  Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs  Firewood & Log Grapples  Free DVD

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA

‘93 Barko 180B

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703 off onto a conveyor. This is a very

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous wellWebsite built processor. Item ID 13820. WWW.TREETRADER.COM ~ The World’s Largest For The Tree & Landscape Industry Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

13238. Chris x700

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

automatice firewood processor

with John Deere power unit with

low hours. Control panel John Deere 640includes tach, oil pressure, water temp and Grapple Skidder amp gauges. Cuts logs up to 16”. Item# 13848

Contact: Samcomes with all One owner and

Ph: (888) 401-6367 x702 manuals and receipts. Purchased

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

‘15 Cord King M44

on injection pump. always started

IteminID: 13961 good. good working order. 22in Contact: kohing head.Austin head works great. Ph: (888) 401-6367 x703

Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Sam x702 1996 Timbco T425B FB w/2008

approximately 1500 hours. Hour computer and Scorpion controls, meter dont The2last owners added speedwork. control. sets2of

1999 Banditrotation 1900 Tracked Disc9900 continuous on upper. Chipper - Cat Under Carriage at hours. New Undercarriage. New

delimber, grapple has been rebuilt. pay shipping to closest US entry Boom Item cylinders have Sam minor leaks. point. ID 13532. x702

new for $32,500. Item ID 13865.

LOGGING EQUIPMENT Rotosaw Intermittent Saw Head. BANDIT Machine has 540 degree non

50% or 475good hp Cummins glass inbetter. cab. Very running Diesel. 7500 Hours. One owner. condition. Rotosaw has 360 degree Well maintained. Item ID 13294. rotation. Cummins 6CT8.3 engine Sam x702 with 215 HP. Machine runs great.

2004 Bandit Beast hardwood Model 4680today. Working in select 3412 ID Caterpillar Diesel Item 13548. Sam x702engine

with Timbco 850 HP. 820C 5300 hrs. Mill in 1997 Clam Bunk good condition. Just original finishedhours. 10 Forwarder - “4000” Acrexclearing job, to work! 20.3 25 rubber atready 70%. Hand Remoteand control. Big production sanded painted, brand new

have only it to load trucksinor tracks , all used new Lexan. Located as a backup as needed. Has will a CTR Alberta, Canada. Customer

Item Timberline ID 13694. Sam x702 1998 Stroke Delimber 94 Barko 275 Excellent 8400 hours. U/C at 60%.value Will crank withrun. lowOwner at hours at 3,500. 5.9 and retired. Machine CUMMINS continuous grapple. idle for past year. Item ID 13599. Runsx702 Great!. Item ID 13740. Sam Sam x702 Timbco 820D Clam Bunk 1999

BELLhours. New Forwarder - 10,300

1990 Bell Super - This Bellago. has engine less thanT500 hours a brand new Duetz engine. Lever Can accept bunks, but none with

control, 33” bar, pump and tranny machine. Owner has two sets of

20 53

Ite Co Ph

track

addi

Sam

1999

11k h

engi

fresh 28L

dece

but c and

coul

bush

1321

2000

4-Ro

on m

engi

U/C

with

pum

new

cool

Pack

extra

 List  seLL exchange buy  save  since❘ 1986  LumbermensCO.com Issue 364 Lumbermens ❘  List  seLL  exch

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO 2006 CAT 517 Thurs, 7 Sept - Sat, 9 Sept Item ID: 13869 Escanaba, Michigan Contact: Sam Ph: (888) 401-6367 x702 MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

SUBMISSIONS 2000AD W900 KW w/ May be sent to Rotobec MT27 morris@lumbermens.co HeavyPOSTMASTER Spec

Send address changes to:

Item ID: 13993 Exchange Lumberman's Contact:P.O. Austin Box 1916 Columbia, TN 38402 Ph: (888) 401-6367 x703

The Lumberman's Exchange is hours on this machine, in excellent published monthly by Woods Publishing, P.O. Box 1916, condition. Item ID 13937. Austin Columbia, TN 38402. All rights reserved. All editorial/ advertorial x703 submissions are used at the discretion ofLIEBHERR the publisher and may be edited for purposes of clarity 2007 Liebherr A924C Log Handler and space. Although all efforts have Rubber Tired Log Loader. 13,000 been made to ensure accuracy of content submitted by advertisers hours. 40’ Reach with two section and writers, the Lumberman's boom. 60” Log Grappleand with Exchange, its principles associates, are not held liable for continuous rotation. Fixed Cab errors or omissions. Reproduction, Riser withorcab guard protection. in whole part, is prohibited with out written consent. Front push blade. Tight and dry. ©2017 Woods Publishing

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Cambridge, Ohio ‘14 Komatsu WA200 www.ohioforest.org

Loader

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

combustion systems backed with ﬁ27 fty years of Metal . .............. 30 Bell's ID: Machining engineDetector's with greatInc fuel economy. Item 13854 ..................... innovative clean-burn design. Diverse in every Contact: Sam Brute Force Mfg. ..................... 31 Midwest Sharpening .............. 26 way with multi-fuel blending capability. Hurst 11,230 hours. Fixed cab riser. Two stokers utilize hundreds of common and Ph: (888) 401-6367 x702 Buck Equipment (AIM) ........ 36 Mor barkboom ..................................... 9 section with 38’ reach. Cab abundant solid biomass fuels. protection. 4-Wheel drive and Large or small scale, Corley Mfg .............................. 32 project Multitek ................................... 12 management is eased with the Push blade. Can pull loaded trailer. 4-Wheel drive and steering. steer. CRD Metalworks .................... 25 Piper's impressively short installation time Saw Shop.................... 13 Top Quality machine. Would beprefabricated trailer. Cleaned, serviced and required with CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 great for log yard or mill work. components. inspected. Tight and dry and ready modular CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Item ID 13476. Sam x702 for work. Located in Baltimore, Dyna Products ........................ 35 Sawmill Exchange .................. 11 2011 Liebherr A904 Rubber Tired MD. Item ID 13478. Sam x702 Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Log Handler. Liebherr 4 cylinder LINK-BELT

11,230 hours. Fixed cab riser. Two 3 Hahn Machinery ...................... Rotary Dryers Sand Dryers section 38’ reach. Cab14 Hurstboom Boilerwith ............................. Grain Dryers protection. 4-Wheel drive and Lumber Kilns Iron Bull ................................... 21 steer. Can pull loaded trailer. Cement Kilns Kilgore Saw ............................. 22 Brick Kilns Cleaned, serviced and inspected. Lignomat ................................. 24 Tight and dry and ready for work.

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly

‘14 Hurdle 3-Hd has been rebuilt, it has a 24foot in Block Sawmill 10 hours on this machine since it

feed deck 2013997 foot out feed deck Item ID:

with 44 inch wheels, Contact: Austin and all the

Ph:and (888) 401-6367 x703 bells whistles, its a production

machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with

Firewood Proc.

Caterpillar generator - Low hours

Item ID: 13865 on the mill, electronic computer Set Contact: Sam Ph: (888) 401-6367 x702

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam boomx702 loader, 3 knife disc, Newer

One Owner, low hours! CARRIAGES & DRIVES discharge chute, New banding Innovative Item ID: 14010 2010 Cardinal HD Carriage around disc, Brakes and tires are Clean-Burn Design Contact: Austin Carriages (Sawmill) -works Cardinal also OK, Everything well Ph: (888) 401-6367 x703 Carriage line it includes carriage

B. H.CAT Payne .............................. 16 Meadows Mill, Inc. ................ 33 ‘04 953C Front2011 Liebherr A924 Rubber Tired ..................... 29 Baker ...................................... 5, 7 Menominee Manufacturing ﬁredHandler.Saw end Loadera full line of biomass Log Liebherr 4 cylinder

Greatwith Lakes Mfg . .................... engine great fuel economy. 34

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Smith Sawmill3400 ........................... 1997 Linkbelt has rebuilt 4

Pierce Stroke Delimber. Pads The Paul Bunyan Show36” ......... 39 on 60% undercarriage. 5221 hours. Thomas Industrial Controls..... 10

Good running condition. Owner Union Grove Saw & Knife.. 2, 37 just spent $30,000 on upgrading Universal Refiner ................... 23 delimber. Item ID 12992. Sam x702 WoodMizer ................................ l

MORBARK

Located in Baltimore, MD. Item ID Cleaned, Serviced, and Checked 1987 Morbark 27 WCL NEEDS out FORESTRY EQUIPMENT FOR SALE ❘  SELL YOUR EQUIPMENT TODAY - Morbark ❘ 0  24/7 - USED SALE l§ TODAY SUPPORT 13477. Sam x702 for service. Can pull loaded MOTOR 1000 SUPPORT Knuckle

Newer clutch -- with outboard with onboard log turners, carriage bearing, Had Cummins KTTA 750 drive, hyd pac for carriage, HP engine -- needs repower. Item

sawyers cab, computer controls, ID 12443. Sam x702 cabinet with electronic drives for 1997 Morbark Model 2400 Chipper carriage knees, husk including - Has a Cumins diesel engine and 48" bottom saw and 36" top saw runs great. All fluids and filters

have been changed. Item ID 13429.

STACKING RAC

Sam x702

1999 Morbark 1400 Tub Grinder Loader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702

2006 Morbark 6600 Horizontal

Grinder - Approx. 6000 hours on this well maintained machine. Has New Cat Dealer Rebuild

1000HP Engine at 5000 hours.

42” X 66-5/8” HAMMERMILL;

VARIABLE SPEED INFEED YEARS www.BakerProducts.net SYSTEM; HAMMERMILL 800.S48.6914 I S73.663.7711 DRIVE INCLUDES ALL BELTS, ❘ SHEAVES,  (888) BUSHINGS 401-MENS L! 401-MENS & NO. 13

“Precision Under Pressure”

New "BUILT-RITE" Tumbler!

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

NEW OPTIONS

Infeed hopper with conveyor allowing you to dump wood in with a bucket and also integrated outfeed conveyor so finished product goes directly 14077 in to your truck!

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘04 Woodmizer LT70 Hydraulic

1988Only John Deere $ 8,995! 440D

Item# 13781 Contact: Sam diameter Ph: (888) 401-63674’x702

Item ID: 13940 Contact: Austin Ph: (888) 401-6367 x703

John Deere C6 x ‘95 8’ barrel Hydraulic drive, Power PackFarmer available Tree

ID: 13920 Compare—Dollar for Dollar Your BestItem Firewood Processing Option!

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 x703

800-757-2520 750 East Hill Rd. Ludlow, VT 05149

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

capacity!. Item ID 13421. Sam x702 www.built-rite.com

Trelaninfo@built-rite.com Chipper BARKO

Item ID:160B 13866 1994 Barko - Electric More! Firewood Processors * Wood Splitters * Conveyors * Contact: Sam

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Sam x702 All Sizes Available!

BANDSAW

BLADES

secondary wood processing. Welded to your lengths!16 a Chomper Model We also offer expert sharpening services, plus...

Item ID: JW-986495....and just about any Custom with John Deere Saws you need power unit with Chipper to keep you cutting longer... Contact: J Williams low hours. for less. Ask about FREE Shipping! Item ID: Control 13975 panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and Contact: Austin Ph: gauges. (888) 401-6367 x703 amp Cuts logs up to 16”.

‘88 John Deere 440D chain conveyer, 8 way splitter, on Skidder 20,000lb goose neck trailer. Item ID

One owner and comes with all

manuals and receipts. Purchased

Reman Cummins Engine. Item ID: 13781 13916. Austin x703 new for $32,500. Item ID 13865. Equipped with 18” Waratah High Contact: Sam Call Marvin Miller for a quote Best Value Portable Log Splitter Sam x702 DiscRoad Saw. 28L x 26 Tires at Ph: (888) 401-6367 x702 231-924-5953 (fax) 231-924-6166 Speed / 11606 Brickyard • Holton, MI 49425

Item ID: 13936 Ph: (888) 401-6367 x703 Contact: Austin Ph:1700 (888) 401-6367 with hours, in very x703 good

grapple, 5,000 original hours.

13238. x700 guard. Chris Item ID 12267. Sam x702

PDA

‘05 Gehl CTLGang 70• Edger • Scraggautomatice firewood processor 58” • Trim Precision • Split • Strob

‘83 John Deere 4850 ‘94 Caterpillar Item ID: 14073 320 Contact: Austin

Ph: (888) 401-6367 x702

motor, Rotobec continuous

(excellent condition.). ItemHood ID Mud Tracks. Front blade.

Firewood Processor - This is

TOP PERFORMING, economical blades for all primary &

knuckleboom, 30' boom, 75hp

1995 Feller Buncher 2005 Barko Valmet775 941BHarvester - Totally -refurbished Pumps recently redone. 400 head to toe! Very hrs good on injection pump. always startedin running condition. Over $50,000 good. good working order. 22in recentin updates and maintenance. kohing head.pin head works great. New center bushings; new Item ID 13185. Sam x702 bogey seals; valves resealed; all

1999 Barkopacked. 160D - 10,200 new engine cylinders hours.with approximately 1500 hours. Hour Largest of rubber tired harvesters.

meter dont work. The last 2 owners Has Valmet 370.2 processing head have only used it to load trucks or with less than 4000 hours. Engine as a backup as needed. Has a CTR condition. Easily produces high made the best valued log splitter. runs well. Tires at 50%. This is a in very good shape and has been delimber, grapple has been rebuilt. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 Bandit 1900 Tracked Disc hard to find gem and priced below maintained and runs very well. 4000 hours. Torque convertor well maintained. Item ID 12194. Boom cylinders have minor leaks. drum design. Can easily load 42’ 13HP Honda motor. Manual start Chipper - Cat Under Carriage at market. Item ID 12569. Sam x702 Hard to find them in this good transmission. 14 hole wheels. Tires Sam x702 Item ID 13694. Sam x702 vans and produce 6 - 8 loads per but electronic option is available. 50% or better. 475 hp Cummins 2005 Valmet/Timbco 415 Harvester of condition. Has a twin that is are 30.5’s at 55% and one at 80%. ‘98 Timberjack 1270B - 7,300 hrs. 94 Barko 275 - Excellent value Diesel. 7500USED, Hours. One owner. day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge YOUR SOURCE FOR RECONDITIONED: with 370E Head - 15,400 hours. available if you need two units. Center has very little slack. This Perkins 6 Cylinder Engine. All • Squirrel Cage Motors - CraneItem andIDMill with low atThree-Phase hours at 3,500. 5.9 EDGERS & GANGS adjustable to single twoMotors way. Great• DC Well maintained. 13294.• Transformers, 370E Harvesting head just added Item ID 12524. Sam x702 skidder has been a back up skidder modules and Motors computer are brand • Adjustable • Gear Speed Drives • Across/Line Magnetic Starters CUMMINS continuous grapple. Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Sam x702 • Wound-Rotor Motors • Generators AC and DC • Reduced Voltage Starters in 2010 and has 7000 hours. 36” 2005 Valmet 860.1 8-Wheeled for the several years. Skidder has new. Tires on average are around Runs Great!. Item ID 13740. Sam in excellent condition. Runs great. Firewood Processor - This is a 2004 Bandit Beast Sets Model 4680 - • Safety • Synchronous Motors • Engine-Generator Switches Triple Grouser tracks rebuilt one Forwarder - 17,800 hours. New 12000 hours. Item ID 13805. Sam 80% Video: http://youtu.be/R_ x702 Item ID 13644. Sam x702 3412 Caterpillar Diesel engine • Phase homemade processor with a 10’ • Transformers, • DC Motors Single Phase Convertors year ago and are at 80%. Sisu x702 MQZe5QEFw. Item ID 13572. Chris hydraulic transmission and gear FIREWOOD PROCESSORS BELL with 850 HP. 5300 hrs. Mill in log deck. Has a hydraulic grapple, P.O. Box 2812 • Toledo, Ohio 43606 engine that is very onhas fuel. box in 2013. $70,000 of updates in 1981 Timberjack 520 Very hard to x700 ax to 2010 Shop Built Wood Processor 1990 Bell Super T - stingy This Bell chain and kicker that all runs off good condition. Just finished 10 WWW.RoWELECTRiCAL.CoM 8’ squirt at end of boom for 30’ 2012. Bogies just resealed. Spare come by! 653 Detroit. Runs Great!. VALMET - It has a 353 Detroit diesel, 40 a brand new Duetz engine. Lever Acre clearing job, ready to work! of a 4 cylinder Mercedes power - Small manufacturer in PA has

LOGGING EQUIPMENT 40% complete with chains. This BANDIT machine has been extremely well

ROW ELECTRICAL EQUIPMENT, INC.

419-244-8887

rowelec@glasscity.net

800-248-4479 419-248-4479

reach. Reversible fan and pump ($7,000 value) Good running control, Item insert ID 13741. Sam x702 1998 Has Valmet 3-Wheeled inch tooth circle saw, 30 foot 33” bar, pump andauxiliary tranny Remote control. Big production unit. a 4’603 chain saw that kicks WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL oil cooler. Still runs OK. Cutting condition. Sisu engine uses 4 gal/ 2002 Timberjack 608s with hot saw Buncher - 6500 hours on total ❘  will LumbermensCO.com today but needs some basic

Issue 6000 364 Lumbermens 1986 385 hours, on List  seLL  exchange  buy set save hour. 16 ton capacity. One of - Approx. Machine is™  since machine but no❘ hours 4BT3.9

 Issue 364

Lumbermens  since 1986

❘

 List  seLL  exchange  buy  save

❘

 Lumbermensmagazine.com

** CALENDAR**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers

‘05 Tigercat 230B

‘97 Prentice 210E

that go up and down, with airbags,

Item# 13795

MID-ATLANTIC

LOGGING & BIOMASS EXPO

itContact: includes two sets of Mcdonough Sam

pressure guides. Top Casting Ph: (888) 401-6367 x702 wheel

Selma, North Carolinax703 Ph: (888) 401-6367 www.midatlantic-logging-biomass expo.com/

is supported on both sides. This

Every Reputable2006 Wide Band Planer - This is a 10” is an Logosol extremely accurate machine Supplier Offers 4insided ve1y planer good condition, Cuts 130 that has removable KENTUCKY WOOD EXPO

feet aSteel minutethat also hastake CLTup presses. side cutters will to Fri, 15 Sept3- High Sat, 16Quality Sept Swedish Itemlumber ID 13876. x703 Lexington, Kentucky andAustin includes a blower 3 3” – 8” Band Width 12” http://www.kfia.org/ S & W 125 Band Mill with system. Item ID 13428. Sam x702 3 16 to 20 Gage KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Caterpillar generator - Low hours 3 Double Cut Options POLE & POST PEELERS on the mill, electronic computer PS8 Post Peeler - This peeler has Set THE PAUL BUNYAN SHOW 3 Choice of Swage orworks,1 Stellite ‘99 Hydro-Ax 1/2" or 2" band, 22ft. track

‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Resaw

Fri, 6 Oct - Sun, 8 Oct

‘05 From Woodmizer When You Buy Your Circular Saws B.H. Payne Austin Woods You’ve Bought the best... We Guarantee It! LT300 (888) 401-6367 ext. 703

been converted to electricity over

WOLVERINE

Cat 3406 140KW Genset, 12,400 Cambridge, Ohio 511EX hydraulic. Comes with a operators www.ohioforest.org BUT ONLY THE hours ready to run. Item ID 13434. Item ID: 13799 cab, electric boxes, conveyor and Sam x702 BY Sam MENOMINEE SAW Contact: kickersGUARANTEES and will peel a 3” post to a

** INFO LINK**

Item ID: 14031 Traditional Quality MAILING ADDRESS Contact: Combined Austin B & B Mfg . ............................... P.O. Box 1916 With Todays Technology Ph: (888) 401-6367 x703 18

Columbia, Quality Brand TN 38402-1916 Reg. U.S. Pat Off (888) 401-6367

feed deck 20 foot out feed deck

MID-ATLANTIC Item LOGGING ID: 13911 & BIOMASS Fri, 15 Sept - Sat, 16 Sept Contact: Austin

MARKETING DIRECTOR

austin@lumbermens.co

has been rebuilt, it has a 24foot in

Escanaba, Michigan

PUBLISHER

EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702

10 hours on this machine since it

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Danckaert Band Resaw - Roughly

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

‘98 752-0627 611 Ex-Hydro ‘10 Shop Call 800 Circular SawsBuilt Baker ...................................... Make Sure To Ask ForAx Our Free, Complete Saw Catalog 5, 7 ADandSUBMISSIONS Saw Bits Shanks Wood Processor Circular Knives May be sentWe to Manufacture & SellBell's InsertedMachining Tooth Headsaws, Solid Tooth 27 ..................... B. H. Payne .............................. 16

Saws morris@lumbermens.co ItemSaws ID:&13948 ItemCarbide ID:Tipped 13916 Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth Cutoff Brute Force Mfg. ..................... 31 Contact: Contact: Austin B.H. PaynePOSTMASTER & Company Stock & Sell Bits & Shanks, CarbideAustin Tips, Diamond Wheels, John Deere 548G2 Ph: 401-6367 x703 Saw Manufacturers Buck Equipment (AIM) ........ 36 address changes to: Wheels, Ph: Send (888) 401-6367 x703 Knife Grinding Saw(888) Gumming Wheels & Knives. Item ID: 14042 Lumberman's Exchange Mfg .............................. 32 Here’s What Get With Every B.H.Corley Payne Saw P.O. You Box 1916 Contact: Austin Columbia, TN from 38402 CRD Metalworks .................... 25 Ph: (888)good 401-6367 x703the Highest • Saws Quality Nickel ‘14 B66TD Skidder - manufactured Very runningonly ID 13438. Sam x702Alloy Steel.

• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.

Rotochopper

The Lumberman's Exchange is CWTimberPro Mill-ArmorHog .............. 17 condition. Big Capacity Grapple! 2007 810 Combi • We Tension Your Saw toinYour RPM Speed BEFORE Leaving Our Factory. published monthly by Woods - 3410 hours. $32,000 recent CW Mill-Hogzilla ................... 15 9400 hours. Tires at 40%. Totally Guaranteed. Machine Publishing, P.O. Box • Your Satisfaction -1916, Completely Item- Forwarder ID: 13838set up but upgrades repairs. Fecon Columbia, TN and 38402. All rights gone through by TP Dealer who comes with rebuilt Log Max 750 35 Dyna Products ........................ Contact: Sam reserved. AllMulching editorial/Head. advertorial BH250 Item ID submissions are used at the (888) 401-6367 didB.H. the following: RepackedInc. and processing head. Less Ext. than 603 5200 8 Empire Hydraulics ................... Payne &publisher Company, 13502. Sam discretion of the x702 and may resealed hydraulic cylinders – total hours. Runs very well. Has 34 Boxfor 90608 beP.O. edited purposes Great Lakes Mfg. .................... 2011 Tigercat 620Dof- clarity This is a and Although allReplaced efforts have Eastspace. Point, GA 30364 grapple arch, steering; blade and plumbed for a clam hour skidderaccuracy with only Item Machinery ID 13408. Sam x702 Hahn ...................... 3 beenlow made to ensure of 5500 404 761-8711 hydraulic hoses and where bunk. New swing gear box. Quick content submitted bylines advertisers hours on a cummins engine and 2014 Tigercat 630D Grapple Hurst Boiler ............................. 14 Fax 404 and writers, the Lumberman's needed – fill761-5398 pump, grapple, etc; attach in 15 min. to switch head to a fire suppression Comes Iron Skidder - Dual Arch Grapple. Just Exchange, its principlessystem. and Bull ................................... 21 associates,hydraulic are not held liable for Repacked fill pump; grapple. Cummins 6.7 QSB engine. mounted on 35.5 tires at 50% back 1990 hours. 3 year/5000 hour PT

“Since 1890” Reproduction, errors or omissions. Kilgore Saw ............................. 22 Replaced exhaust; Optional on all in whole or part, is Replaced prohibited with on 260HP. and 40% front and good center chains warranty. 35.5Tracks tires with dualing Lignomat ................................. 24 out written consent.and painted pins; Straightened adds $10,000. IDWinch. 13501. all 4 tires. Has the bigger 630 axles bogies rings at www.paynesaws.com 60%. WideItem blade. E-mail: info@paynesaws.com Web Site: ©2017 Woods Publishing

CARRIAGES & DRIVES post. Comes with a barko loader • Cutting Edge Plasma 7” Welds 2010 Cardinal HD Carriage a truck that has also • The Industry’s Highestmounted Band on Saw Capacity Carriages (Sawmill) - Cardinal Runs great. Has worked double been converted to electric power. Carriage line Inventory it includes carriage • Quick Delivery from our HUGE M&F ............................. shifts Gauge so it has higher hours 28 Item ID 13926.log Sam x702 carriage with onboard turners, • Fast Sharpening & Exchange Program 14’ Snow Pusher Meadows Mill, . ................ at 13,500, but hasInc been well 33 SAWMILL drive, PORTABLE hyd pac for carriage, Item ID: JW-492406 to Keep YOU Running maintained. New U/CDL200 last year. 36” Portable - Maximum Menominee Saw ..................... 29 ‘11 Doosan sawyers cab,JSawmill computer Contact: Williamscontrols, 24” grousers. All pumps rebuilt last diameter log36” Maximum • ID: Competitive Pricing Item JW-113876 cabinet with401-6367 electronic drives for Metal Detector's Inc. .............. 30 Ph: (888) x701length Ph: (888) 401-6367 x702

Contact: J Williams year. Gull wing engine cover with

of cut-20’6” Powered by a Koehler carriage knees, husk including

Midwest Sharpening.............. 26

And ONLY Menominee Gives You Everything Ph: (888) x701 hydraulic lift401-6367 for easy maintenance. Diesel 9.8HP Blade-1-1/4” 13’2” 48" bottom saw and 36" topby saw

Morbark ..................................... You need in a 9Wide

Band Saw – Plus long 12 Volt saw-head precision the Industry’s Most computer measures well. Owner up/down. Item ID 13897. Austin Piper's Saw Shop.................... 13 Knowledgeable Staff. retiring. Bought new for $540,000!. x703 Rolly II in good condition and

Multitek ................................... Expert Service 12 from

Rotochopper ............................ 40 Item ID 13362. Sam x702

STACKING RAC ‘04 Fabtek 344B

36” Portable Sawmill - Maximum Band Problem?

Got a Wide diameter Call Menominee Saw Todaylog-36” and Maximum You’ll length Harvester/Forwarder - JustMore 5700 of cut-20’6” by Koehler Sawmill Exchange 11 Mills Learn.................. Why Trust Powered the Pro!

Row ............................ 2006 Electric TimberPro 830 COMBI 20

hours.Sawmill Very good condition. Comes Select ......................... 19

gas 19HP Blade 1-1/4” by 13’2”

Item ID: JW-093430 ‘05 Transport long 12 Volt saw-head Contact: J Williamsprecision TOLL FREE x701 Trailers Custom Ph: (888) 401-6367 and Log Max 7000 processing head up/down 12 Volt Electrical The Paul Bunyan Show ......... 39 Log Pup2 sets of tracks for 1-800-582-0470 for harvesting. Forward/Reverse Saw Head with grapple for loading forwarder Smith Sawmill ........................... 4 Thomas Industrial Controls..... 10

Item Set ID:up JW-538174 Processor - This is a Chomper bogies. for quick change Travel. Item ID 49858 13899. Austin x703 900 16th St., Menominee, MI

Union GroveJ Saw & Knife.. 2, 37 Contact: Williams

super with a- 60hp In from harvesterTel: to grapple. One Dixon Sawmill VERYengine. UNIQUE 906-863-2609 Fax: 14, 906-863-1147 Ph: (888) 401-6367 x701 very nice shape. Only 171Dixon hours, AND EFFECTIVE MILL! Email: info@menomineesaw.com

Universal Refiner man operation. Log................... Max head 23 has

comes with green conveyer. 52 in bottom bladechain and 38 in top WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711 All of the manuals for the engine,

WoodMizer top saw and................................ runs well. Comparel to

Waratah 624 Super - New Item ID new machine at $650,000. panels; allCenter fluids pins and are tightSamItem x702ID 13526. Sam x702 andChanged no winch. Computer (Logrite). - USED FORESTRY EQUIPMENT FOR 2010 SALE ❘ Tigercat  SELL EQUIPMENT TODAY ❘ head grapple 24/7 SUPPORT SALE l§ TODAY 0 SUPPORT 13439. Samfor x702 filters; Re-insulated cab; Checked TimberPro 725B w/Rolly II and extra fuel tank. Item ID 13929. 2015 234BYOUR Loader - Model roatation on the w/ a 10500 hours. New main pump and fixed wiring as needed. Item Processor - Super PLANERS Sam x702 234B. Only 300Clean hours Machine. on this 30’ reach on the boom. Joystick and auxiliary pump. New rebuilt

www.BakerProducts.net

blade. It has a four blade vertical

and chopper itself with comeNO. ❘ edger  the (888) 401-MENS 15 L! 401-MENS diesel powered awith fuel 2006 Tigercat 630C Grapple it, as well as all of the electrical efficient motor. Item Skidderduezt - Very247hp good running schematics. Item ID 13894. Austin

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

“Precision Under Pressure”

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

720E Tigercat Feller Buncher w/Tier 3 Engine Item ID: 44546 2014 with only 3000 hours, everything has been extremely well maintained. Valves adjusted every 1000 hours, regular oil changes. Machine runs like its brand new, tight, no leaks, everything works on it. Tires all over 50%. Has a Tigercat 5702 log head. One of the last 3 machines sold with a tier 3 engine.

Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

Timberjack Dual Arch

‘13 KMC 2500 Track 2010 Timberjack Skidder648 HTC Skidder

Item ID: 86178

Good condition, Dual arch grapple Timber jack 460D w/torque converter, 15,000 hours, new main hydraulic pump, new alternator, refurbished John Deere winch, large winch. Has some minor hydraulic leaks, nothing Victory major. 13428 Firestone tires w/chains Ln. 30%, // heat PO works,Box a/c needs recharge but works. Fire suppression system

Item ID: 57023

Item ID: 14078

124 Adams Center, NY 13606

New center pins, 6 new injectors, replaced the harmonic Austin balancer, hasContact: 9777 hours. The machine has been very well maintained, tight ready to get to work. x703 Ph:and (888) 401-6367

Contact: FERY Email: Fery@lumbermensco.com Phone: (888) 401-6367 ext.705 or (801) 699-8784

H O T

B U Y S

Item ID: 33799

New reman Cummins turbo motor, Powershift transmission. Motor put in not too long ago. This is a 3rd owner machine with size 28l 26’s tires. With lots of Tread left. The paint on this machine is original. All around very strong skidder, Ready to hit the Woods! Call for more info!

‘05 Gehl CTL 70

Contact: WALKER Item ID: JW-986495 Email: Walker@lumbermensco.com Phone: 888-401-6367 707 Contact: JEXT Williams

Ph: (888) 401-6367 x701

‘83 John Deere 4850

2003 CAT 525B

Item ID: 3800

This Skidder has approx 12,000 hours on it. Strong motor and transmission. Center section and blade are tight and in good chain conveyer, 8 way onThe condition. Has 42,000lb CAT Brand winch. Heatsplitter, and AC work. only thing wrong with this skidder is the Grapple pins are loose. Other than that it’s Readygoose to work! Call for more info. Item ID 20,000lb neck trailer.

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

13916. Austin x703

Contact: WALKER Email: Walker@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 707

- Small manufacturer in PA has

condition. Easily produces high made the best valued log splitter. 2005 Valmet 840.2 Forwarder quality chips with patented ‘Cone’

Itemlogs ID: up 66330 Handles to 32”. Uses

drum design. Can easily load New 42’ transfer13HP Honda start installed, pumps motor. have beenManual rebuilt, Rear end vans and produce 6 - 8 loads

boggy bearings replaced, Seals in rear have been replaced. per butwith electronic is bucket available. Machine comes spare rim,option and parts w/ 360 super grip. 20190 Hour

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

EDGERS & GANGS

Contact: DEMI Email: Demi@lumbermensco.com adjustable to single two way. Great Phone: (385) 335-4225

in excellent condition. Runs great. Item ID 13644. Sam x702

Firewood Processor - This is a Log Loader/ Excavator 225 LC homemade processor Item ID: 51519 with a 10’

FIREWOOD PROCESSORS log excavator deck. Has grapple, 1986 Caterpillar withaa hydraulic 3208 engine 5000 hours,

total hours ischain 19000,and Grapple, heals,that bucket. 2010 Shop Built Wood Processor kicker all runs off

- It has a 353 Detroit diesel, 40Contact: FERY of a 4 cylinder Mercedes power inch insert tooth circle saw,  Issue 364 385

Email: Fery@lumbermensco.com 401-6367 or (801) 30Phone: foot (888) unit. Has aext.705 4’ chain saw699-8784 that kicks

Lumbermens™  since 1986

❘

2009 Item ID:2384 13920Prentice Knuckleboom Contact: Austin Loader Item ID: 83019x703 Ph: (888) 401-6367

This machine is set on a hydraulic trailer with a 426 delimber and CTR groundsaw. 2 years ago the machine got new pins, bushings and knives. The swing motor was rebuilt as well as the hydraulic pump. Bushings and pins were capacity!. ID 13421. Sam has x702 replaced on Item the boom. This machine no leaks, working A/C, and is ready to get to work.

BARKO

Contact: DEMI

Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

1992 Timberjack 380B

‘95 John Deere C6 Tree Farmer

off onto a conveyor. This is a very

1994 Barko 160B - Electric Email: Demi@lumbermensco.com Phone: (385) 335-4225

knuckleboom, 30' boom, 75hp

Clarkmotor, 667 Rotobec continuous Item ID: 59500

well built processor. Item ID 13820. Sam x702

grapple, 5,000 original hours.

CLARK Esco 112 swing grapple, Cummins 6bt Chains, Brush Item blade,IDWinch (excellent condition.). Firewood Processor - This is engine, Studded Machine is running good. text or email for more a Chomper Model 16 PDA pictures. 13238. Chris x700

1995 Barko 775 B Feller Buncher automatice firewood processor Contact: FERY

Email: Fery@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: (888) 401-6367 ext.705 or (801) 699-8784

low hours. Control panel includes

on injection pump. always started

amp gauges. Cuts logs up to 16”.

kohing head. head works great.

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

good. in good working order. 22in CAT 140G Item ID: 93592

tach, oil pressure, water temp and

Caterpillar all new led lighting, new batteries, couple new drive tires, 4Item new studded chains,Sam snowing wings, Just had ID 13185. x702 One owner and comes with all main new Axle seal replaced on one side, new head gasket all within the1999 last 500 hours.160D Machine is running goodwith and Barko - new engine manuals and receipts. Purchased ready to work, text for more pictures.

Sam x702

Contact: FERY Email: Fery@lumbermensco.com meter dont work. The last 2 owners Phone: (888) 401-6367 ext.705 or (801) 699-8784

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294.

Sam x702 2014 Vermeer WC 2300XL Item ID:Model 990244680 2004 Bandit Beast

Whole Tree Chipper. 1500 hours. CAT C13 3412 engine engineCaterpillar with 440 HP,Diesel runs and starts well., strong hydraulics. Chipper features wireless with 850 HP. 5300 hrs. Mill in drum remote, smart feed and 23" capacity style chipper. Machine is in good shape. Feed good condition. finished chain in good order.Just Includes extra 10 knives.

Acre clearing Contact: DEMIjob, ready to work! Email: Demi@lumbermensco.com Remote control. Big production Phone: (385) 335-4225

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

TimberjackBELL 460 Dual Arch

Item ID: 91657 1990 Bell Super T - This Bell has Contact: FERY

aEmail: brand new Duetz engine. Lever Fery@lumbermensco.com Phone: (888) 401-6367 ext.705

control,or 33” bar, pump and tranny (801) 699-8784 ❘

 LumbermensCO.com

** CALENDAR**

1998 Timberjack 360 Item ID: 8121

Cable Skidder, 8,000 hours on a rebuild. Has 5.9 Cummins with a 6 speed power shift transmission. New pins just installed not too ago. Ready to pull Wood. Call for moreFIELD info! NYlong STATE WOODSMEN'S DAYS

Fri, 18 August - Sun, 20 August Contact: WALKER Email: Walker@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 707 www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST250 PRODUCTS EXPO 2003 Tigercat Log Loader Item-ID: 46268 Fri, 25 August Sat, 26 August

2013 John Deere 437D Item ID:Tree 96805 The

Has superHot hot saw and bucket plumbed to run a slasher... Springs, Arkansas Right at 10,000 hours! Rock solid ready to work! Call for www.arkloggers.com more info.

that Started it All! Contact: AUSTIN

5200 hours. Serviced every 250 hours. Comes with CTR bucksaw. Hasn’t been used for delimbing much.

72ND ANNUAL Contact: WALKER GREAT LAKES Email: Walker@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 707

Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703 published 931-797-8029 a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Holtec Transcut II

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Ford F650 Service Truck

92089 DanckaertItem BandID: Resaw - Roughly

2008 with 210000 miles.machine Cummins diesel. 400 it gallon 10 hours on this since

diesel tank, and 600 gallon tank. Equipped with welding

machine, andrebuilt, air compressor. has been it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production machine, with air strain conveyers

314goCTR Delimber that up and down, with airbags,

Item ID: 70976

MID-ATLANTIC LOGGING & BIOMASS Item ID: 71870 it includes two sets of Mcdonough 2014 Model 20’ fixed frame assembly, Siemens electricFri, 15 Sept - Sat, 16 Sept motor with starters. 7.5Kw (10hp) voltage 220V 3 phase John Deere engine, also has ground saw attached to it. armored guide bar. 63” effective cutting length.

AUSTIN MID-ATLANTIC ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Austin@lumbermensco.com

pressure guides. Top Casting wheel Selma, North Carolina Contact: AUSTIN www.midatlantic-logging-biomass is supported on both sides. This Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703accurate OR 931-797-8029 is an extremely machine

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

(888) 401-6367 ext. 703 austin@lumbermens.co Contact: AUSTIN

Email: Austin@lumbermensco.com ADDRESS Phone:MAILING 888-401-6367 EXT 703 931-797-8029 P.O. Box 1916

S & W 125 Band Mill with

center section, new AC.

Caterpillar generator - Low hours

Contact: THEAUSTIN PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct EXT - Sun, 8931-797-8029 Oct Phone: 888-401-6367 703 OR

works,1 1/2" or 2" band, 22ft. track

Serco 170A Self Propelled Loader Item ID: 57111

** INFO LINK**

JD motor was completely overhauled, new pumps, new drive motor, new hydraulics. Work ready. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID 13876. Austin x703

on the mill, electronic computer Set Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Log Max 7000 Sam x702 Item ID:& 96628 CARRIAGES DRIVES

In Pennsylvania. wear 2010 CardinalMinimal HD Carriage Contact:(Sawmill) AUSTIN - Cardinal Carriages Email: Austin@lumbermensco.com Phone: line 888-401-6367 EXT 703 Carriage it includes carriage 931-797-8029 with onboard log turners, carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Item ID: 8019

Menominee Saw ..................... 29

May be sent to 1995 model 19ftBell's in feed Machining stop & load with 18ft out feed. Electric ..................... 27 over hydraulic. Can cut 26ft long. 4cylinder Isuzu diesel motor. morris@lumbermens.co

Metal Detector's Inc. .............. 30

Item ID: 84473 cabinet with electronic drives for

Production is comparable to a woodmizer lt300. Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Contact: AUSTIN Buck Equipment (AIM) ........ 36 Send address changes to: Email: Austin@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 703 OR 931-797-8029 Corley Mfg .............................. 32 P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Multitek ................................... 12

Columbia, TN 38402-1916 (888) 401-6367 S&W

AD SUBMISSIONS POSTMASTER

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have 83’ John Deere 740A been made to ensure accuracy of Item ID: 95074 content submitted by advertisers Very starts at 0 degrees with no anddependable writers,skidder, the Lumberman's assistance. Big winch, 25.5x32 tires. 4 new chains. ReExchange, principles and man engine with its low hours. Tight center section, doesn’t associates, held liable for burn any oil. Veryare cleannot skidder despite its age. errors or omissions. Reproduction, Contact: in whole orAUSTIN part, is prohibited with Email: Austin@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 703 931-797-8029 ©2017 Woods Publishing

125 High Production Mill

drive, hyd pac for carriage,

2017 Tigercat 630E sawyers cab, computer controls,

2400 hours in excellent condition.

Contact: AUSTIN 48" bottom saw and 36" top saw Email: Morbark ..................................... 9 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Piper's Saw Shop.................... 13

STACKING RAC

Real Tuff Bagger

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................30Hp 20 motor, infeed hopper opens 27”x34”

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill .........................Email: 19 Austin@lumbermensco.com

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery 3 2007 Cat...................... 517 Item ID: 60554 Hurst Boiler ............................. 14

The Paul Bunyan Show ......... 39

Equipped with 30” pads, fully enclosed cab, 6 way blade. Equipped with winch. Meticulously maintained. In excelIron Bull ................................... 21 lent condition inside and out.

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. Phone: 888-401-6367 EXT 70324 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 50281

Bag/bale size 12”x16” Contact: AUSTIN

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Thomas Industrial Controls..... 10

Cat D5H LGP Item ID: 64808

Union Grove Saw & Knife.. 2,1999 37 model with 34” pads and winch. 8000 frame hours. New undercarriage. Located in Kentucky

Universal Refiner ................... 23

Contact: AUSTIN

Email: www.BakerProducts.net WoodMizer ................................ l Austin@lumbermensco.com Phone: 888-401-6367 EXT 703I OR 931-797-8029 800.S48.6914 S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 17

B U Y S

7100 hours, new undercarriage, new saw motor, hydraulic pumpsAustin and driveWoods pumps have been gone through.

Lexington, Kentucky Item ID: 83971 http://www.kfia.org/ 2004 Model has brand new crate motor professionally installed. 30.5 primex tires with excellent tread. Tight KentuckyWoodExpo.aspx

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall Timbco 425Exl (888) 401-6367 ext. 702 Item ID: 84253 sam@lumbermens.co

feet a minute also has CLT presses.

H O T

MARKETING DIRECTOR

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15Tigercat Sept - Sat,630C 16 Sept

“Precision Under Pressure”

'70 Allis Chalmers HD6 Dozer

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 60357

"70 Allis Chalmers HD6 Dozer w/$6,000 in spare parts. Argo winch works good. Can hand 200 ft. of 3/4" cable. 10' blade. Manual blade and transmission. Button on side of winch. UC 80%. Needs the generator swapped out for an alternator. Motor was rebuilt about 6 yrs ago. It is a 4 cylinder Allis engine. Call for more pictures.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

KMC 210 Grapple Dozer w/Winch

‘16Deere Halverson H140 '85 John 440 B Skidder

Item ID: 67293

Item ID: 42533 Skidsteer (DEMO)

KMC 210 Grapple machine with winch, everything is in good working order. Selling because he recently upgraded to a Cat D5H TSK Call for more pictures, info, and video!

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

'85 440 B - Hrs unknown. He has owned it for 12 yrs. Redone the engine and trans 3 yrs ago. JD winch works good. Pins tight, steering cylinder has a small leak (1/2 gal every 2-3 days). 24 X ? tires 70%. Ready to work. Selling because he has too much equipment . Call for more pictures.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

KMC 210180B Cable ‘93 Barko Skidder Dozer

Item ID: 14077 Item ID: 54571 Contact: Austin 210 Engine runs good, everything is in good working conPh: (888) 401-6367 x703 dition, undercarriage about 50% bushings good, pads are

worn but still have probably 1000 hours on them, great for wet terrain. Call for more pictures and video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

John Deere 540G3 Cable Skidder Item ID: 76922

approx 10300 frame hours, good winch 90' of good cable, 23.1 tires 2 at 80% 2 at 70% dry machine, tight, good running machine. 2 owner/operator machine, very well kept, regular maintenance every 300 hours, greased regularly. New bottom cushion for seat will be put in for buyer. Call for more pictures and video!

H O T

B U Y S

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Ph: (888) 401-6367 x703

Item ID: 52964

W6F Allied Systems Winch

approx 15,000 hours, good tight center pins, tires 23.1s 65%, good chains in front 60%, Lufkin winch, brand new 3/4 100' cable, and 7/8's cable will be included, new water pump, both axles completely redone, change oil every 500 hours, cat 500 and 1000 hour services been done, comes with new complete cat filters for differentials, oil, hydraulic, air, and fuel, currently working, woods ready machine! Call for more pictures!

winch came off 850 c John Deere dozer. Controls are with it. Everything is in good working condition. Took it off dozer and put a set of rippers FITS: Cat D6, 527 Komatsu D61-D65 John Deere 750-850 Case 1850 New Holland D180 Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

‘83 John Deere 4850

Item ID: 56032

‘05 Gehl Contact: MARK CTL 70

Email: Mark@lumbermensco.com Item JW-986495 Phone: ID: 888-401-6367 EXT 708 702-875-2703 Contact: J Williams Ph: (888) 401-6367 x701

Timberjack 230 Cable Skidder

Item ID: 51788 chain conveyer, 8 way splitter, on Timberjack 230 Cable Skidder. Excellet condition,

1979 Item ID: 14073 Excellent tires. Eaton Winch, Straight Blade. Call for more Contact: Austin pictures. 20,000lb goose neck trailer. Item ID 13916. Austin x703 Ph: (888) 401-6367 x703Contact: TED Email: Teds@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 701 or (801) 319-9351

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS Brewco - Two Brewco Saws Mack Saws Truck w/Hood Loader Item ID: 76831 in excellent condition. Runs great.

It’s an ID R model fromSam the 70’s. There is an 8-track Item 13644. x702 player in the dash. The cab is very rough so miles and hours are unsure 7000 hood loader Less than 500 hours on rebuilt engine. Call for more pictures!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK - Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30708 inch tooth circle saw, foot insert702-875-2703  Issue 364 385

Morbark ‘13 KMC 6036 2500Chipper Track Item ID: 75143 Skidder

in real good working condition, 525 HP engine, comes a lot of extra parts, pumps, knives, Itemwith ID: 14078 drums, teeth, anvils, knife holders, also includes a Contact: Austin spare/parts chipper $100,000 OBO Call for more pictures!

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Cat 515 Cable Skidder

‘95 John Deere C6 Tree Farmer '92 Hyster H230XL

made the best valued log splitter. 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

LT70 Value! Woodmizer PA. Item ID 12062. Sam x702 Item ID: 63054 Firewood Processor - This is a 6858 hrs, Has a processor New Yanmar diesel less than homemade withwith a 10’ 300 hours accuset 2 setworks, lubemizer, debarker, chaindeck. log turner, 2 boxes of new blades, command log Has a hydraulic grapple, control setup, everything is in good working condition. Ready to saw! Call for more pictures! chain and kicker that all runs off MARK Mercedes power ofContact: a 4 cylinder Email: Mark@lumbermensco.com Phone: 888-401-6367 unit. Has a 4’ chain EXT saw708 that 702-875-2703

Lumbermens™  since 1986

❘

kicks

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

off onto a conveyor. This is a very

Item ID: 13920 Item ID: 27365 Contact: Austin This is a 1992 Hyster H230XL diesel forklift with approximately 18,000 hours. Lift capacity is 23,000 lbs. Ph: (888) 401-6367 x703 We bought it new and have kept it well maintained and

in good working order. When not in use, it is garage parked. It has 96” forks with a 147½ lowered mast height. We have two forklifts & have operated this machine part-time for 10+ years since losing our full time forklift operator. We are selling it only because we capacity!. 13421. x702 bought a newerItem forklift ID recently and doSam not need three lifts! A great deal on a very good machine that is ready to go to work for you today! Call for more pictures.

BARKO

1994 Barko Electric Contact: TED 160B Email: -Teds@lumbermensco.com

Phone: 888-401-6367 EXT 701 or (801) 319-9351

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Zaxis 200 Forestry Tracked Loader

well built processor. Item ID 13820. Sam x702

Item ID: original 20426 hours. grapple, 5,000

Hitachi- Zaxis 200 Forestry 17,248 hours Item EngineID rebuilt at (excellent condition.). 13,000 11’ 2” w/28” pads 36’ reach boom 48” cab riser 52” Rotobec grapple w/live heel Similar to John Deere 2154 13238. Chris x700 Call for more pictures

Firewood Processor - This is a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

1995 Barko 775 B Feller Buncher

Contact: MARK Email: Mark@lumbermensco.com - Pumps recently redone. 400 hrs Phone: 888-401-6367 EXT 708 or 702-875-2703

low hours. Control panel includes

on injection pump. always started

amp gauges. Cuts logs up to 16”.

Item ID: head 44852 kohing head. works great.

good. in good order. 22in tach, oil pressure, water temp and John Deere 650 working G LGP Dozer ItemForestry ID 13185. x702 One owner and comes with all’98 650 G LGP Dozer. package, Sam winch, log arch, risers, screens.

Pedal steer. 6-way blade. 3,935 hours. UC 70%. Bushings and pins

around 500 hours. Brand new Idler on right-side. Good machine, ready 1999 Barko 160D new engine with manuals and receipts. Purchased to work. Call for more pictures.

new for $32,500. Item ID 13865. Sam x702

approximately 1500 hours. Hour

Contact: TED Email: Teds@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 701 or (801) 319-9351

have only used it to load trucks or LOGGING EQUIPMENT as a backup needed.Buncher Has a CTR BANDIT Franklin C5000asFeller

1999 Bandit 1900 Tracked Disc

Item ID: 32989 delimber, grapple has been rebuilt.

with a 22 in. Hot saw head new breaks new seals in transfer case new glass original hours nice clean machine 6BT Cummins, with Boom cylinders have minor leaks. Chipper - Cat Under Carriage heat at cold a/c 5200 28L's 2 new 2 50% sat in a shop about 10 years with heated floor, was pained when glass was done last winter. There is no problems with the machine it IDruns13694. Sam x702 50% or better. 475 hp Cumminsis tight and rightItem the head smooth. Trans is strong Engine runs good no blow buy no leaks on machine Cold A/C heat works good four wheel drive works good machine runs cool.275 Call for- more pictures andvalue video! 94 Barko Excellent Diesel. 7500 Hours. One owner.

MARK Mark@lumbermensco.com with lowEmail: at hours at 3,500. 5.9 Well maintained. Item ID 13294. Contact: Phone: 888-401-6367 EXT 708 or 702-875-2703

Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

CUMMINS continuous grapple.

Runs Great!. ID 13740. Sam Morbark PS8Item Post Peeler x702

Item ID: 63148

Morbark PS8, plainer domer, Cat diesel electric generator 75 kilowatt, bins, complete operating mill extra set of knives, extra spike wheels, with 850 HP. 5300 hrs. Mill in stacking bearings, extra shaft the PS8 and it has all new bearings the spike rolls have all new points, the peeler head has new knives and roughing head chisels so Bell Super has good condition. Just finished 10 basically it is a 1990 completely rebuilt machine T with- 0This hrs Call Bell for more pictures!

BELL

a brand new Duetz engine. Lever Contact: MARK Email: Mark@lumbermensco.com control, 33” bar, pump and tranny Remote control. Big production Phone: 888-401-6367 EXT 708 or 702-875-2703 Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Cat 232D Skid Loader

Timberjack 430B Knuckle Boom Loader

www.starwebhosting.net/woodsmen/

Fri, 25 August - Sat, 26 August

Item ID: 92115

Hot Springs, Arkansas www.arkloggers.com

2011 model with 7200 hours, has good rubber and is a one owner well maintained skidder.

10 hours since it Bunch of work put intoon thethis topmachine end of motor in July.... has 11,350 hours all together. working until sold. Call for more info! has been rebuilt, it has a 24foot in

deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Contact:feed WALKER Email: Austin@lumbermensco.com Email: Walker@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Timbco 425B

Phone: 888-401-6367 EXT 707 bells and whistles, its a production

machine, with air strain conveyers

Gehl R220 Skid Loader

that go up and down, with airbags,

Item ID: 28551 MID-ATLANTIC LOGGING & BIOMASS it includes twovisible sets of (‘93) new drive track pumps 1K hrs ago, motor was reman 3K hrs Brand new tires (stamp still in Mcdonough tread) hydraulic ago. 33” Timbco barsaw head. U/C 60%. only 10K frame hrs. Three Fri, 15 Sept - Sat, 16 Sept quick-connect/disconnect, 72hp, 2-speed, no leaks, dealer Item ID: 74779

guides. Top with Casting wheel maintained, pressure ready to work., drive levers foot controls, Selma, North Carolina no attachments included, 1 dump cylinder pin has a little play www.midatlantic-logging-biomass is supported on both sides. This Contact: WES Email: Wes@lumbermensco.com expo.com/ is an extremely accurate machine

owners. One of cylinders on boom needs repacking. A/C - heat ok, windshield just replaced, 5.9L Cummins, leveling cab.

JOE MID-ATLANTIC ADVERTISING SALESContact: LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 OR 801-362-2170 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

BARKO 495ML

MARKETING DIRECTOR

Phone: 888-401-6367 EXT 710 OR 260-452-6055

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

feet a minute also has CLT presses.

Lexington, Kentucky

Item ID: 33905

Item ID 13876. Austin x703

John Williams http://www.kfia.org/ (‘16) (4.2K hrs) Cummins engine, one gear box replaced at 3.5K hrs (888) 401-6367 ext. 701 and a recall on oil cooler. A/C - heat works, Big John hydraulic trailer, KentuckyWoodExpo.aspx j@lumbermens.co fully plated. Excellent conditions, turn-on ready!

DESIGN DIRECTOR Contact: JOE Donna Heninger

Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co P.O. Box 1916 Columbia, Forwarder TN 38402-1916 Valmet (888) 401-6367

Item ID: 42041

AD SUBMISSIONS 2004 Valmet 860.1 Forwarder, 8 wheel, 18000 hours, well May maintained, good condition. A be sent to set of 5/8” diamond back studded chains, morris@lumbermens.co no tracks. All hydraulic pumps were rebuilt Contact: DEMI Send address changes to: Email: Demi@lumbermensco.com Phone: (385) 335-4225 Lumberman's Exchange

P.O. Box 1916 Columbia, TN 38402

S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

works,1 1/2" or 2" band, 22ft. track

John Deere 1710D Cat 3406 140KW Genset, 12,400

Cambridge, Ohio 2012 Tigercat 610C www.ohioforest.org Item ID: 98059

7870 hours, 1 hour on out of frame reman on the entire engine, hydrostats in great condition, dry machine, tight centers, tight blade, tight grapple. Excellent woods ready machine. Call for more pictures!

** INFO LINK**

Forwarder hours ready to run. Item ID 13434. Item ID: 94242 Sam x702 2003 John Deere 1710D 8 wheel forwarder, approx

CARRIAGES & DRIVES

16k hours, tires approx 60%, comes with tracks on the back, great working machine! Call for more pictures! Cardinal HD Carriage 2010

B & B Mfg. ............................... 18

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 M&F Gauge ............................. 28 702-875-2703

B. H. Payne 16 Item.............................. ID: 87930

Meadows Mill, Inc. ................ 33

(‘09) (9.5K hrs) U/C at 80%. Head is the 40 degrees Baker ...................................... 5,33”7 Timbco barsaw head. Cummins 8.3L engine. Needs nothing!

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Contact: JOEMfg. ..................... 31 Brute Force Email: Joe@lumbermensco.com Buck Equipment (AIM) Phone: 888-401-6367 EXT........ 70936 801-362-2170 Corley Mfg .............................. 32

Midwest Sharpening.............. 26

carriage knees, husk including

CRD Metalworks .................... 25

Piper's Saw Shop .................... 13 Skidder Item ID: 44899 Rotochopper............................ 40

Timbco 445 EXL

Vermeer SC372 Stump Grinder

ID: 15150 .............. 17 The Lumberman's Exchange is CWItem Mill-ArmorHog published monthly by Woods 2016 Vermeer SC372 stump grinder, 85 hours, like new condition, diesel CWresidential Mill-Hogzilla ................... 15 engine, fits through gates, comes with extra sets of teeth. Publishing, P.O. Box 1916, Landscaper was going to get into stump grinding but too busy. Call for more Columbia, TN 38402. All rights pictures! Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: MARK submissions are used at the Email: Mark@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisher and mayPhone: 888-401-6367 EXT 708 or 702-875-2703 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Franklin Q80 Grapple Skidder content submitted by advertisers Item ID: ............................. 55955 Hurst Boiler 14 and writers, the Lumberman's 2003 Franklin Q80 grapple skidder with winch, approx 13k hours, tight pins Exchange, its principles and and bushings all around, arch,................................... new 5.9 Cummins approx 20 hours ago, Iron dual Bull 21 associates, are not held liable forused very lightly the last 4 years, used for hauling utility poles the majority of its life. Excellent machine Call for more pictures! errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: MARK in whole or part, is prohibited with Email: Mark@lumbermensco.com Lignomat 24 out written consent. Phone: 888-401-6367................................. EXT 708 or 702-875-2703 ©2017 Woods Publishing - USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Morbark ..................................... 9 Multitek ................................... 12

Tigercat 610E Grapple

2015 Tigercat 610E dual arch grapple skidder, approx 3500 hours, 30.5 tires. Excellent condition, Row Electric ............................ 20everything works as it should. CAll for more pictures!

Sawmill Exchange .................. 11 Contact: MARK Email:Sawmill Mark@lumbermensco.com Select ......................... 19 Phone: 888-401-6367 EXT 708 702-875-2703 Smith Sawmill ........................... 4

Contact:(Sawmill) MARK - Cardinal Carriages Email: Mark@lumbermensco.com Carriage it includes carriage Phone: line 888-401-6367 EXT 708 702-875-2703 with onboard log turners, carriage

drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

JD 548D Grapple Skidder Item ID: 8230

1989 John Deere 548D grapple skidder, decent main line, centers are good, new winch drive shaft 6 months ago, new head gasket and injectors about a year ago, front drive shaft, pinion, and u joints new. 28L tires. Selling because can’t haul it on a gooseneck trailer. Call for more pictures and a short video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

The Paul Bunyan Show ......... 39

KMC 2400 Grapple/winch Item ID: 83802

Thomas Industrial Controls..... 10

Union Grove Saw & Knife.. 2,2015 37

KMC 2400 single arch grapple with winch 950 hr. Undercarriage 75%. Strong tight and sound.

Universal Refiner ................... 23

Contact: TED

Email: Teds@lumbermensco.com www.BakerProducts.net WoodMizer ................................ l 888-401-6367 Phone: EXT 701 or (801) 319-9351 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

MAILING ADDRESS

POSTMASTER

B U Y S

The Tree that Started it All!

BANDMILLS & HEADSAWS 1997 Timberjack 460 Cable Skidder John Deere 540G3 SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly ItemBand ID:24393

H O T

FOR CLASSIFIEDS Item ID: 39708 Call 888.401.MENS Joystick controls, 67hp, dealer maintained, no leaks, 2002 timberjack 430B, with bucksaw, approx 9k hours, OROPS, needs nothing, woods or farm ready, manual enclosed cab heat/air, AC good. Great working machine bucket release,See no attachments included pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Call for more pictures and video! Fri, 18 August - Sun, 20 AugustContact: WES Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Email: Wes@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 710 OR 260-452-6055 Item ID: 26771

Tigercat 630 C Dual Arch

Cat D4C LGP Forestry Dozer

“Precision Under Pressure”

Phone 315.284.4126Item ID: 99373 Fax 1993 Cat D4C LGP forestry dozer, good winch/strong winch, rails and pads 315.849.2045 are 40%. New rollers and idlers 130 hours ago. All fluids and filters where changedWebsite 130 hours ago. New batteries, alternator, fan belt, and starter all new. Clean straight machine, everything works as it should. Will walk on www.empirehyd.com water! Call for more pictures! Email info@empirehyd.comContact: MARK

Item ID: 10836

2004 Tigercat 630 C Dual arch w/winch.13,xxx hours. Rear tires are 80% Front 40% Hours will continue to go up as it is on the job and working as weather permits. Call for videos Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 Barko 180B

Tracked Feller Buncher ‘16 Halverson H140CAT 522B Item ID: 14077 Item ID: 31272 Contact: Austin Skidsteer (DEMO)

VALMET 840.2 FORWARDER Item ID: 9770

401-6367 x703 2016 Cat 522BPh: 1437 (888) hours, 2900 intermittent head, cold weather Item ID: JW-909632 starting package, 28” tracks, self leveling cab, fire suppression system, tracks undercarriage approx 90% Call for more info Contact: J Williams Ph: (888) 401-6367 x701 Contact: MARK

2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

Cat D5G with Winch Item ID: 107

2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.

‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029

120 Prentice

L O G G I N G

Item ID: 50009

Tigercat T240B Item ID: 4266

120 Prentice loader that is ready to be hooked 13428 Victory Ln. // Box 124 on a truck. It came off a railroad and PO has very 2006 model with 10,500 hours, has all new hoses, along low hours, Comes with PTO, Pump NY and grapple. Adams Center, 13606 with all repacked cylinders. In excellent condition.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘13 KMC 2500 Track Skidder

Contact: Austin Ph: (888) 401-6367 John Deere 648E x703

Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703

model in excellent condition, every bushing are new. Has not been in the capacity!. Item worth ID 13421. Sam done! x702 since having $20k of work

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Sam x702

grapple, 5,000 original hours.

a Chomper Model 16 PDA

‘05 Gehl CTL 70

Item ID: 28889

automatice firewood processor

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

with John Deere power unit with

low hours. Control panel includes

Cat 508 Cable Skidder tach, oil pressure, water temp and

2016 Barko 495 Item ID: 51788

2500 conveyer, original hours, in excellent chain 8 way splitter, on condition.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 with 1700 hours, in very good

20,000lb goose neck trailer. Item ID Contact: AUSTIN 13916. x703 Email:Austin Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter 931-797-8029 - Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

John 548G2 Brewco SawsDeere - Two Brewco Saws Grapple Skidder

in excellent condition. Runs great. Item ID: 34791

Item ID 13644. Samskidder, x702excellent condiJohn Deere 548G2 grapple

FIREWOOD PROCESSORS

tion, regular maintenance, 28L’s, good strong winch, tight centers, dry, no leaks, excellent condition, straight, ready for the woods! Call for more pictures!

2010 Shop Built Wood Processor MARK -Contact: It has a 353 Detroit diesel, 40 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot 702-875-2703  Issue 364 385

made the best valued log splitter.

Item ID: 84481 amp gauges. Cuts logs up to 16”.

Cat 508 cable skidder, 10,379 hours, great mainte-

nance,owner 23.1’s 80%and all around, goodwith strongall cat winch, One comes right centers, just pulled of job, work ready skidder! Call for moreand pictures! manuals receipts. Purchased

Contact: MARKItem ID 13865. new for $32,500. Email: Mark@lumbermensco.com Sam x702888-401-6367 EXT 708 Phone: 702-875-2703

LOGGING EQUIPMENT BANDIT540D 1988 John Deere

1999 Bandit 1900 Tracked Disc Item ID: 727

Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage

but electronic option is

transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.

Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

2008 Barko 495 ML

3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all

it is a tight and dry machine. runs Owner off statesgood condition. Just finished

Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com

Remote control. Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR

Lumbermens™  since 1986

❘

motor, Rotobec continuous

(excellent condition.). Item ID

Firewood Processor - This is

ItemPrentice ID: 14073 2190

BARKO

Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029

well built processor. Item ID 13820.

‘83 John Deere 4850

Item ID: 6603

 List  seLL  exchange  buy  save

13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in 1991 Timberjack 450B Item ID:works 1826 great. kohing head. head

New ID pins13185. & bushings. Tight skidder all Item Sam x702 around. Ready to drag some wood.

1999 Barko 160D - new engine with Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 meter dont work. The last 2 owners 931-797-8029 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

John Deere 650G

Runs Great!. Item 13740. Sam Item ID:ID 30113

x702 1995 650G LGP, 6558 hours, 500 hours on new C

BELL

frame, pins, and bushings, new arm rests, tracks and undercarriage approx 80% or better, regular maintenance, dry. Call for more pictures!

1990 Bell Super T - This Bell has MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com Phone:33” 888-401-6367 EXTtranny 708 control, bar, pump and 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

2001 John Deere 435 Item ID: 7100

Loader is very tight and dry. It also comes with CTR bucksaw. NY STATE

Fri, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

WOODSMEN'S FIELD DAYS 18 August - Sun, 20 August

Boonville, New York www.starwebhosting.net/woodsmen/

The Tree that Started it All!

Tigercat 845 Item ID: 8139

SOUTHWEST FOREST PRODUCTS Prentice 180 EXPO Fri, 25 August -Item Sat,ID: 267822 August

Hot Springs, Arkansas 94’ model with joystick control and bucksaw hookups. www.arkloggers.com 10000 total hours.

1999 model with 8200 Hours, UC is about 80%, has 36” pads. All filters were just changed, and cylinders repacked.

AUSTIN Contact: AUSTIN 72ND Contact: ANNUAL GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com has Phone: 888-401-6367 EXTEXPO 703 LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXT 703 OR 931-797-8029

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

931-797-8029 Thurs, 7 Sept - Sat, 9 Sept

Escanaba, Michigan

John Deere 650J XLT

BANDMILLS & HEADSAWS

CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it

2011 Model with around 8000 Hours, well maintained

and ready to work. has been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and 931-797-8029 whistles, its a production machine, with air strain conveyers

Excavator w/Ryan DS 28 Felling Head that go up ID: and76226 down, with airbags, Item ID: 5109 Item MID-ATLANTIC LOGGING & BIOMASS it includes two setsaof Mcdonough 2009 model with forestry package, has 6000 frame hours, This is a 2006 320CL excavator with Ryan DS 28 felling with new John Deere installed engine 3 months ago. UC is Fri, 15 Sept - Sat, 16 Sept head on it. machine is tight with no leaks. The cutter head around 75%

Contact: AUSTIN

MID-ATLANTIC ADVERTISING SALESEmail: Austin@lumbermensco.com LOGGING & BIOMASS EXPO

pressure Casting wheel has about 250 hours onguides. it and the Top excavator has 8,000. It Selma, North Carolina has about 500 hours on new hydraulic pump. www.midatlantic-logging-biomass is supported on both sides. This Contact: TED expo.com/ is an extremely accurate machine

Morris Woods Phone: 888-401-6367 EXT 703 OR 931-797-8029 (888) 401-6367 ext. 704 morris@lumbermens.co

Cat 517

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky

Item ID: 20725

John Williams http://www.kfia.org/ 2006 model with 6000 original hours, and enclosed cab. (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx j@lumbermens.co Work ready.

DESIGN DIRECTOR Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

JD 540A (‘76)

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

in ve1y good condition, Cuts 130

feet a minute CLT Morbark 30XL also has Item ID:presses. 13937 Item ID 13876. Austin x703

Great condition, very well kept, 900 HP V12 Cat engine, discs/wear plates replaced 1 year redone, and with valve bank has been S& W ago, 125spout Band Mill replaced, machine has been completely gone through and anything needing replaced has been, greased regularly, new radiator Call for Caterpillar generator - Low hours more pictures!

Item ID: 3526

** INFO LINK**

Tire size 23.1-26, Back tires 70% thread left, Front 15%, 2yrs owner, Motor completely rebuilt (700hrs), Transmission rebuilt (by John Deere 900hrs ago), Center section good, Breaks good, Turn on, ready to go to work, In KY Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 OR 801-362-2170

P.O. Box 1916

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

Item 54265 (888) ID: 401-6367

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

BELL TRACKED (1993) Columbia, TN 38402-1916 Lever, Deutz engine, Has unit for A/C, but unsure of it AD SUBMISSIONS working or not, 2 years, Used for one job, U/C 65-70%, Burns no oil, InMay PA be sent to

morris@lumbermens.co

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send888-401-6367 address changes to: Phone: EXT 709 Lumberman's Exchange 801-362-2170 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity JD 460 (1997) and space. Although all efforts have ID: 1095 been madeItem to ensure accuracy of content submitted advertisers New 5.9L Cummins engine, by Single arch, Deere winch, Comes chains, the 12K frame hrs, New hydraulic pump and with writers, Lumberman's (about 100hrs), New seals & and bushings, In NY Exchange, its cylinder principles associates, are not held liable for Contact: JOE errors or omissions. Reproduction, Email: Joe@lumbermensco.com in whole or part, is prohibited with Phone: 888-401-6367 EXT 709 out written consent. 801-362-2170 ©2017 Woods Publishing

on the mill, electronic computer Set

Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or 702-875-2703

JD5, 640 (’80) Item ID: 93988 Saw ..................... 29 Baker ...................................... 7 Menominee

Cat 3406 140KW Genset, 12,400

hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd Deere pac for carriage, John 650K XLT Item ID: 480 sawyers cab, computer controls,

2013 model with 4300 Hours, has forestry package, and

Detector's Inc.and .............. 30 & Bell's Machining ..................... 27CenterMetal strong, section tight & strong, Turn-on GO, All fluids

Tires 23.1x26 , Thread left 30%, 6068T Powertex engine (’96), Brakes

cabinet with electronic recently had new tracks, sprockets,drives idlers, andfor rollers

Brute Force Mfg. ..................... 31

filters just changed, In OH

carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Midwest Sharpening.............. 26

Contact: JOE Email: Joe@lumbermensco.com

Buck Equipment (AIM) ........ 36 888-401-6367 Morbark ..................................... Phone: EXT 709 OR 801-362-2170 9 Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CAT 518 (’88) Item ID: 90569 CW Mill-ArmorHog .............. 17 Rotochopper............................ 40

Same owner 7yrs,Tire size 23.1x26, Back tires 90%, Front tires 40%, CAT 3304 engine, Center tight, Franklin 42 9 (bump winch), Good,

CW Mill-Hogzilla ................... 15 Electric ............................ 20 strong motor,Row getting out of business, no crack sheet metal, straight pins, In OH

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Contact: JOE Email: Joe@lumbermensco.com

Empire Hydraulics ................... 8 888-401-6367 Select Sawmill Phone: EXT 709......................... OR 801-362-217019 Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10 Hydro Ax 611E Item ID: 58544 Union Grove Saw & Knife.. 2, 37

Iron Bull ................................... 21

Contact: AUSTIN

Email: Kilgore Saw ............................. 22Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

installed.

STACKING RAC Prentice 210E Item ID: 8256

Knuckleboom loader. Needs new batteries and also needs the small gear on the Rotobec head. It has saw and delimber hookups, but no saw nor delimber. Ready to be shipped! Good machine, gets the job done, works as it should!

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 800.S48.6914 801-362-2170 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21

L O G G I N G

MARKETING DIRECTOR

Donna Heninger

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

07 Prentice 950B

“Precision Under Pressure”

Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘16 Halverson H140 John Deere 650H Skidsteer Item ID:(DEMO) 50512

Item ID: JW-909632 Contact: J Williams Contact: AUSTIN Ph: (888) 401-6367 x701 Email: Austin@lumbermensco.com Equipped with forestry package.

Phone: 888-401-6367 EXT 703 931-797-8029

John Deere Backhoe Item ID: 21361

John Deere 410D Backhoe, 4WD, Heavy Lift Option, 4&1 Bucket on front, 12” on back, 10ft. Snow Pusher, 2900 hours,

Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

L O G G I N G

‘05 Gehl CTL 70 Contact: AUSTIN

Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701 Item ID: 14236

chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer. Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter

Timbco 445EXL w/ EDGERS & GANGS Timberpro Barsaw

Item ID: 26316 Brewco Saws - Two Brewco Saws

2004 Timbco 445EXL 7150 hours right now, it runs everyin excellent condition. Runs great. day so that will change. Machine has a Timberpro TBS32 barsaw.ID The 13644. head was put on atx702 6600 hours, so it’s basiItem Sam cally new. Regular maintenance, undercarriage has one sprocket at about 30% one at 75% and the rest has recently been replaced. Tight machine Call for more pictures!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot 702-875-2703  Issue 364 385

2011 model portable loader, has 8,631 hours on it. capacity!. Item ID 13421. Sam x702 Woods ready.

well built processor. Item ID 13820.

motor, Rotobec continuous

Firewood Processor - This is

(excellent condition.). Item ID

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes

JD 337E (2016)

‘14 John Deere 843K

day. Item ID 13882. Austin x703

Item ID: 52342

Sam x702

2003 model just completely serviced, has newer 120” esco Grapple, reman motor, and new hydraulic pump. Skidder is dry and currently working daily.

vans and produce 6 - 8 loads per

Contact: Austin ‘13 KMC 2500 Track 2011 Deere Ph:437D (888) John 401-6367 x703 Skidder Knuckle Boom Loader

Contact: WALKER BARKO Email: Walker@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 707 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very

Item ID: 5458

drum design. Can easily load 42’

‘95 John Deere C6 Tree Farmer

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT Item 708 or 702-875-2703 ID: 13920

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Franklin Q70

quality chips with patented ‘Cone’

2006 trail king red river series own top trailer with walking floor. Excellent condition. Call for more pictures and video!

Item ID: 48601

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

condition. Easily produces high

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 25361

09’ John Deere 700J

Item ID: 4654

with 1700 hours, in very good

Item ID: 14077 '94 John Deere 548E Contact: Austin Item ID: 14185 Ph: (888) 401-6367 x703

Red River Series Trail King Open Top Trailer

96’ Hydro ax 611E

‘83 John Deere 4850

‘93 Barko 180B

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

tach, oil pressure, water temp and Item ID: 34479 amp gauges. Cuts logs up to 16”.

CSI reversible 4400 (18’ saw), 1.8K hours, In WV

One owner and comes with all

manuals and receipts. Purchased Contact: JOE Email: new forJoe@lumbermensco.com $32,500. Item ID 13865. Phone: Sam x702888-401-6367 EXT 709 801-362-2170

LOGGING EQUIPMENT BANDIT648L ‘15 John Deere

Item ID: 14237 1999 Bandit 1900 Tracked Disc

2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage runs as should ready to go, dual arch, good winch

but electronic option is available. 50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine

2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple,

chain and kicker that all runs

saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition. Just finished 10

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control. Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

grapple, 5,000 original hours. 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. inJD good working order. 22in 550K (2015) kohing head. head Item ID: works 92495great.

Item ID x702 3.5K hrs, 18”13185. new tracksSam sprockets idlers, Winch, In WV

1999 Barko 160D - new engine with Contact: JOE approximately 1500 hours. Hour Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 meter dont work. The last 2 owners 801-362-2170 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS Prenticecontinuous 2124 Loggrapple. Loader Item ID:ID 64635 Runs Great!. Item 13740. Sam

Prentice 2124 loader mounted on truck, 3406 425 HP truck has 450000 miles, 8LL transmission, 40,000 LB rears, 20,000 LB front end, double framed. Call for more pictures!

B model x702

BELL

1990 Bell Super T - This Bell has Contact: MARK aEmail: brandMark@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and 702-875-2703 ❘

 LumbermensCO.com

** CALENDAR**

CAT 555D Grapple Skidder

Prentice 180 FOR Item CLASSIFIEDS ID: 7822 Call 888.401.MENS 3226 hours, 35.5 tires approx 50-60%, everything is in excellent condi1994 Model with 10,000 hours, joystick tion, routine maintenance through cat, works great, pulling machine, control, 6 cylinder Cummins motor, tight turn See pictures, prices, selling only to buy a bogie skidder! Call for more pictures! NY STATE WOODSMEN'S FIELD DAYS table, and plumbed for a bucksaw. Workand ready Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Boonville, New York Email: Austin@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 703 OR 931-797-8029 Item ID: 8610

www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO 2009 John CAT 527 Grapple Dozer Deere 700J Dozer Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August

Item ID: 69600

2005 Cat 527, undercarriage 90-95%, repaired leaky fuel tank, rebuilt transmission/torque and final drive approx 1500 hours ago, strong motor, good working machine. Call for more pictures!

Hot Springs, Arkansas www.arkloggers.com

Item ID: 54715 10 hours on this machine since it

John Deere 700J dozer with winch, machine completely gone through in spring. Enclosed heatrebuilt, and air, excellent approxin 3500 has with been it hasmachine a 24foot hours. Excellent working machine! Call for more pictures!

feed deck 20 foot out feed deck

72ND ANNUAL GREAT LAKES Contact: MARK Contact: MARK Email: Mark@lumbermensco.com Email: Mark@lumbermensco.com with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 or 702-875-2703 Phone: 888-401-6367 EXT 708 or 702-875-2703

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and JD 648 G3 Grapple Skidder industrial woodworking plants worldwide.

PUBLISHER

Thurs, 7 Sept - Sat, 9 Sept

Item ID: 4572

it includes two14184 sets of Mcdonough Item ID:

Email: Teds@lumbermensco.com

Morris Woods Phone: 888-401-6367 EXT 701 or (801) 319-9351 (888) 401-6367 ext. 704 morris@lumbermens.co

John Deere 350D Excavator Item ID: 41687

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

feet a minute also has CLT presses.

Lexington, Kentucky

Item ID 13876. Austin x703 '04 John Deere 700H

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

Contact:Caterpillar AUSTIN generator - Low hours Email: Austin@lumbermensco.com on the mill, electronic computer Set Phone: 888-401-6367 EXT 703 works,1 1/2" or 2" band, 22ft. track

John Williams http://www.kfia.org/ Approx 5882 hours, hydraulic thumb, enclosed cab heat /air good, (888) 401-6367 ext. 701 32” pads, approx 70% undercarriage, everything is in good working KentuckyWoodExpo.aspx j@lumbermens.co condition. Regular maintenance. Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item 14187 S&W 125 ID: Band Mill with

Cambridge, Ohio www.ohioforest.org Treefarmer C7T GM Grapple/Winch Skidder Item ID: 11726

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

** INFO LINK**

Item P.O. ID: Box89885 1916

Phone: 888-401-6367 701 or (801) 319-9351 B & B Mfg. ............................... 18 M&F EXT Gauge ............................. 28

Prentice (’09) MAILING2432 ADDRESS Columbia, TN 38402-1916

-3.7K hrs, Tire size 30.5-32, Tires thread 80% front, 60% (888) back, Center section tight,401-6367 Dual arch, Winch works good, Grapple & steering cylinders repacked recently, Excellent service record, 3rd owner, he put 1.1K hrs on it, 2nd AD SUBMISSIONS owner put only 100hrs on it, then went out of business, May be sent to In IN

morris@lumbermens.co

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange 801-362-2170 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited purposes(‘08) of clarity JDfor848H and space.Item Although all efforts have ID: 8810 been made to ensure accuracy of 14K frame hrs, 3yrs owner,by Owner put 2K hrs on it content submitted advertisers since purchase, Tires size 35.5, 40% thread, No winch, and writers, the Grapple no issue, No oil Lumberman's burn, no leaks, New windows Exchange, 300hrs ago, In TNits principles and associates, are not held liable for Contact: JOE errors or omissions. Reproduction, in whole or part, is prohibited with Email: Joe@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 709 801-362-2170 ©2017 Woods Publishing

PRICE REDUCED - 305 Hours on out of frame rebuild on 4/53 Detroit, rebuild Clark 3 speed powershift transmission and rebuilt torque converter. All paper work available on rebuilds. All new on piece hoses from grapple rotation motor and grapple cylinders and to cylinders on single arch back to the cab valve bank. New transmission hoses also from torque converter to transmission and to transmission cooler. All cylinders rebuilt with no leaks. Some play in craddle pin but over all machine is tight. Frame has No cracks and has never been welded on. 24.5 X 32 tires 20 ply on rear with 20 percent tread 10 ply on front with 5 percent tread.

Contact: TED

B. H. Payne .............................. 16

Email: Teds@lumbermensco.com

Meadows Mill, Inc. ................ 33

Franklin 155B Forwarder Baker ...................................... 5, 7 Menominee Saw ..................... 29

Item ID: 10700 Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 1982 Franklin 155B Tree hauler/Forwarder. Ready to work. Perkins

inline 6 engine. Ideal for walnut. Can be hauled on a low-boy. 5019

Hours. more pictures.Sharpening.............. 26 Brute Force Mfg. ..................... 31Call forMidwest

Contact: Buck Equipment (AIM) ........ 36 TED Morbark ..................................... 9 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2011 Cat 525C sawyers cab, computer controls, Item ID: 26688 cabinet with electronic drives for

New rubber, and lots of recent upgrades.

carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

STACKING RAC

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill Cable........................... Skidder 4

1994 Timberjack 240 B

1989, 5.9 Cummins engine.Controls The engine ..... was replace Thomas Industrial 10 with an almost new motor from a wrecked truck. The

cable Skidder. 7,225 hours on a rebuilt engine. Winch works good. Woods ready.

Hahn Machinery ...................... 3

Prentice 210 E

Hurst Boiler 14 Item............................. ID: 98009

Timberjack 450 C

Item ID:Show 5077......... 39 The Paul Bunyan

Prentice E Series E loader. Well maintained and21 in Iron 210 Bull ................................... great condition.

transmission was rebuilt, also re-build axle. Estimate about 2500 hours onSaw the new Slight.. leak trans. Union Grove &stuff. Knife 2,in37 Fronts 45% with new bear claw chains, backs 80%.

Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701 or (801) 319-9351

Email: Teds@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 701

Kilgore Saw ............................. 22

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Universal Refiner ................... 23 Contact: TED

 SELL YOUR EQUIPMENT TODAY TODAY l§

or (801) 319-9351

❘

 24/7 SUPPORT 0 SUPPORT

Item ID:74044

Contact: WALKER Email: Walker@lumbermensco.com www.BakerProducts.net 800.S48.6914 I S73.663.7711 Phone: 888-401-6367 EXT 707 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

MARKETING DIRECTOR

EQUIPMENT REPS

that go up and down, with airbags, '93 John Deere 548E

front and rear. Working. Almost everything on here has

MID-ATLANTIC ADVERTISING SALESContact: TEDLOGGING & BIOMASS EXPO

Donna Heninger

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS 648 G3 John Deere skidder 9700 hrs on frame new JD motor 400 hrs ago. Blade extensions 28l tires 75 to 80% Fri, 15 Sept - Sat, 16 Sept

Woods Publishing been recently replaced. Call for more info.

DESIGN DIRECTOR

bells and whistles, its a production

Escanaba, Michigan

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 648G3 Item ID: 58995

Two owner machine with 8300 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

'97 Hydro AX-411 EX Bar Saw Head

‘16 Halverson Log Skidder H140 Item ID: 15324 Skidsteer (DEMO)

Item ID: 98754

Heat works. Air needs charging. Tires inc., great shape tires chains to go with it bear claws.

Item JW-909632 2012 John Deere G3 ID: 540 Log Skidder, well maintained, good condition, 7000 hours. J Williams Contact: Ph: (888) 401-6367 x701 Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Log Loader Item ID: 25974

John Deere 2954C Log Loader w/ Waratah 624C Processor Head -2012 -9991 hours -Excellent Condition Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

L O G G I N G

‘13 KMC 2500 Track Skidder

‘89 Timberjack 380A

2011 CAT 525C

Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Item ID: 14203 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Mid 90’s Husky Brute 335XL

ID:13421. 14088Sam x702 capacity!.Item Item ID

off onto a conveyor. This is a very

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp

Item ID: 99096 Sam x702

grapple, 5,000 original hours.

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

well T185 built processor. Item ID 13820. Rayco Hydra Stumper

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

Firewood Processor - This 1998 Rayco T185 Hydra Stumper 185 hp JD engine w/lessisthan 50 hrs on total rebuild New cutter head pump, alternator & gauges. Rebuilt track drives &amain gearbox. Runs & works16 good. Call for more picChomper Model PDA tures! automatice firewood processor

Contact: MARK Item ID: JW-986495 with John Deere power unit with Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

Caterpillar

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts. Purchased Winch Newand Hyd Park Brake. 13916. Austin x703 for $32,500. Item ID 13865. Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT

on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head works great. SH56 Bunching Head, 28L-26 Tires At 60%, Center Tight, Runs Great, Item ID 13185. Sam x702 Machine Has New Injectors, New Fan Motors, 1999 Barko On 160D new engine And Clutch AC, -11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

delimber, grapple has been rebuilt.

‘83 John Deere 4850

‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

Johncondition. Deere Runs 540B in excellent great.

Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours! 2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 385

tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges. Cuts logs up to 16”.

made the best valued log splitter. John

BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc

13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available. 50% or better. 475 hp Cummins Contact:Diesel. SAM 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Treefarmer C5D Skidder

3412 Caterpillar Diesel engine Item ID: 17115 with 850 skidder. HP. 5300 in hi/low log deck. Has a hydraulic grapple, 1970 Tree Farmer C5D cable Detroithrs. 353, 4Mill speed with homemade processor with a 10’ chain and kicker that all

and shuttle, carco winch , ring chains on front axle, good blade. Noisy, but runs pretty good. comes 2 good spare runs smokey, off some leaks good condition. Justwith finished 10tires.

Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: TED Email: Teds@lumbermensco.com Remote control. Big production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 701 or (801) 319-9351

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

96’ John BELL Deere 643D

Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘

 LumbermensCO.com

** CALENDAR**

TimberPro 725B FOR CLASSIFIEDS

Timbco 425D

Item ID: 20976

Item ID: 98053

Call 888.401.MENS

(‘12) (2.8K hrs) One owner. Cummins 8.3L, U/C at 40%. Everything in working order with a Quadco Seedisc pictures, and DAYS 2900 intermittent saw head. prices, Cream puff!

1995 model with good Undercarriage and 22” quadco hot saw. Around 10,000 hours.

NY STATE WOODSMEN'S FIELD 18 August - Sun, 20 AugustContact: JOE Location of all equipment at

Contact: AUSTIN Fri, Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Email: Joe@lumbermensco.com Boonville, New York www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 www.starwebhosting.net/woodsmen/

The Tree that Started it All!

648 E Cable Skidder

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

Item ID: 87791

Hot Springs, Arkansas www.arkloggers.com

648E has new motor 360 hrs on it. 23.1 26 tires at 80 to 85% Almost everything on this has been replaced. Call for more info.

BANDMILLS & HEADSAWS

Timberjack 240D Danckaert Band Resaw - Roughly Item ID: 40272 10 hours on this machine since it

Skidder has a grapple and a winch, with 6 cylinder has In been rebuilt, it has a 24foot in Cummins motor. excellent condition.

feed deck 20 foot out feed deck AUSTIN 72ND ANNUAL GREAT LAKES Contact: Contact: TED Email: Austin@lumbermensco.com Email: Teds@lumbermensco.com with 44 inch wheels, and all the has LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 701 or (801) 319-9351

Since 1986, Lumbermens published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

MID-ATLANTIC

ADVERTISING SALES

LOGGING & BIOMASS EXPO

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

bells and whistles, its a production

'13 John Deere 548G III

machine, with air strain conveyers

Item ID: 8789 MID-ATLANTIC LOGGING & BIOMASS 15 Sept - Sat, 16 Sept 5600Fri, Hours, 23.1 Tires.

that go up and down, with airbags,

Contact: SAM www.midatlantic-logging-biomass Email: Sam@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 702

KENTUCKY WOOD EXPO Fri, 15 Sept Sat, 16 Sept Prentice 384- Knuckleboom Lexington, Kentucky Loader Item ID: 36889 http://www.kfia.org/

2002 prentice 384 Knuckleboom, saw not included. KentuckyWoodExpo.aspx Mounted on ’89 S 2500 International truck. Knuckleboom carrier/trailer is also available for $4,900.

(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703

THE PAUL BUNYAN SHOW Contact: TED Email: Teds@lumbermensco.com Fri, 6 Oct EXT - Sun, Oct319-9351 Phone: 888-401-6367 701 or8(801) Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 JD 640D (’95) Columbia, TN 38402-1916 Item 51746 (888)ID: 401-6367 2yrs owner, AD tire size 30.5x32, tires are at 70%, Center SUBMISSIONS section tight, 8K hrs, engine re-built by previous owner, May be sent to In NY

Contact: JOE POSTMASTER Email: Joe@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 709 Lumberman's Exchange 801-362-2170

JD 648H (’08)

Item ID: 6051 B & B Mfg . ............................... 18 -Tires size 30.5, 30% fron tires, back tires brand new, 16 enB. H. Payne .............................. gine fan is brand new (1.8K last year), all cylinders have been repacked, spent $4K on the A/C last year, brand Baker ...................................... new, Lil’ slack in the center section, not major,5, 12K7 frame hrs, 700hrs he put on it, 25hrs on engine when he first boughtMachining it, Transmission, 2yrs owner, IN MO Bell's ..................... 27

Brute Force Contact: JOEMfg. ..................... 31 Email: Joe@lumbermensco.com Buck Equipment (AIM) Phone: 888-401-6367 EXT........ 709 36 Corley 801-362-2170 Mfg .............................. 32

CRD611EX Metalworks .................... Hydro-Ax Wheeled Feller 25 CW Mill-ArmorHog .............. Buncher Item ID: 4041817

The Lumberman's Exchange is published monthly by Woods 1999 611EX quickCW steer,Mill-Hogzilla 28L’s 60-70% all pumps................... gone through and 15 rePublishing, P.O. Box 1916, built, approx 8000 hours, dry machine no leaks, heart/ air works, all Columbia, TN 38402. All rights new glass, tight excellent machine! Call for more pictures! Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Contact: MARK Empire Hydraulics ................... 8 Email: Mark@lumbermensco.com discretion of the publisher and may Phone: 888-401-6367 EXT 708 or 702-875-2703 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of John Deere 85D content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 48169 and writers, the Lumberman's Exchange, its principles and Only 1265 original hours on it. Comes with 24, 30 & 36” Iron Bull ................................... 21 associates, are not held liable for buckets. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent. Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28

648 G Inc Skidder Meadows Mill, . ................ 33 Item ID: 76963 Menominee Saw ..................... 29

1996 648 G cable skidder. Strong machine. Engine new 3 years ago. Trans also gone Metal . .............. throughDetector's just prior to Inc engine. 28 X 32 30 tires. Strong machine ready to work

Midwest Sharpening.............. 26 Contact: TED

Email: Teds@lumbermensco.com Mor bark ..................................... 9 Phone: 888-401-6367 EXT 701

or (801) 319-9351 Multitek ................................... 12

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine

Danzco Delimber inPT20H ve1y good condition, Cuts 130 Item ID: 14134 feet a minute also has CLT presses. Excellent condition, motorx703 rebuilt about Item ID 13876. Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Barko 495B

sawyers cab, computer controls, Item ID: 44764

cabinet electronic drives forJohn 2016 modelwith with 3900 hours, csi delimber on big trailer fully plated. carriage knees, husk including Contact: 48" bottom AUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

STACKING RAC

Select Sawmill ......................... 19 SmithJohn Sawmill ........................... Deere 640D 4 Item ID:63000 The Paul Bunyan Show ......... 39

Tigercat 604 Cable Skidder Item ID: 6552

cable Industrial Skidder. Controls Rebuilt ..... engine Thomas 10 and new hydraulic pump put in. Union Grove Saw & Knife.. 2, 37 Woods ready.

approx. 7000 frame hours, brand new log arch, new fuel filter, new engine, new water pump, new pick up pump, new injector pump, 5-1000 hours on the new motor, very tight, very dry machine, Clark winch, stout winch 30% tires comes with set of chains at 80% Excellent machine Call for more pictures and video!

Universal ................... 23 Contact:Refiner WALKER Email: Walker@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 707

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR International TD15 John Williams Bull Dozer

P.O. Box 1916 Columbia, TN 38402

Escanaba, Michigan

Selma, North Carolina

Woods Publishing

morris@lumbermens.co

Thurs, 7 Sept - Sat, 9 Sept

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

JD 643G

Item ID: 80565

Good cutting teeth are good one, Little hydraulic leak on cylinder, Dry machine, In MO Contact: JOE Email: Joe@lumbermensco.com

Phone: 888-401-6367 EXT 709 OR 801-362-2170

‘16 Halverson H140 '96 CAT 515 Log Skidder

John Deere 753J

Item ID: 7534

Skidsteer (DEMO)

Item ID: 14258

REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.

2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Ph: (888) 401-6367 x701

Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

'07 John Deere 848H Grapple Skidder Item ID: 6566

Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

L O G G I N G

‘13 KMC 2500 Track Skidder

‘14 B66TD Rotochopper

Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703

12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124

Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

off onto a conveyor. This is a very

well built processor. Item ID 13820. '94 CAT 518C Cable Skidder SamItem x702 ID: 7698

Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor

‘05 Gehl CTL 70

‘83 John Deere 4850

10’ John Deere 648H

Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.

Item 13644.New SamRubber, x702 Heat/ LowID Hours! ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder. 2010 Shop Built Wood Processor

SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702  Issue 364 385

Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach, oil pressure, water temp and

chain conveyer, 8 way splitter,It on has

Timberjack 1270C amp gauges. Cuts logs up to 16”.

Item ID: 8676 One owner and comes with all Timberjack 762C head with a Timberjack 3000

computer. It comes with an extra set of delimbing knives and 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased book on the head.

13916. Austin x703

Best Value Portable Log

new for $32,500. Item ID 13865. Contact: JOE Email: Joe@lumbermensco.com Splitter Sam x702EXT 709 OR 801-362-2170 Phone: 888-401-6367

LOGGING EQUIPMENT made the best valued log splitter. JD 648G III (’03)BANDIT Item ID: 36067 - Small manufacturer in PA has Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc motor 6Khrs ago., 16K frame hours, Transmission

Reman gone through, New brakes, New pins & bushings (main arch lift), All 13HP Honda motor. Manual start Chipper - Cat Under Carriage cylinders repacked, Front and rear ends gone through, Tires at 24.5s, 80% thread front, 70% back tires, Motor has a little blow by and 1 door is missing., Owner since Jan ’18 and put 600 hrs on but electronic option is available. 50% orsince better. 475 hpOwner Cummins it...knows Most maintenance and fixing records avail., In WV

Has Log Lift. Uses 4-way wedge adjustable to single two way.

Diesel. 7500 Hours. One owner.

Contact: JOE Email: Joe@lumbermensco.com Great Well maintained.

Item ID 13294.

Phone: 888-401-6367 EXT 709 OR 801-362-2170

Value! PA. Item ID 12062. Sam x702

Sam x702

homemade processor with a 10’

3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in

Firewood Processor - This is a

log deck. Has a hydraulic grapple,

2004 Bandit Beast Model 4680 -

chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 John Deere Contact: Austin Logger Item ID: 82959x703 Ph: (888) 401-6367

2005 John Deere 2054 Logger New pins and bushings in boom, new rod and packing in jib cylinder, new Front window, new injection pump, resealed main body,Sam tons of new capacity!. Item IDvalve 13421. x702 hoses, new led lights, new pump coupler.

BARKO

Contact: DEMI

1994 Barko 160B - Electric Email: Demi@lumbermensco.com Phone: (385) 335-4225

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item‘05 ID 13185. Sam x702608B Timberjack Item 13898 1999 Barko 160DID: - new engine with

Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

525Dgrapple. CUMMINS CAT continuous Item ID: 9555 Runs Great!. Item ID 13740. Sam

(7.5K hrs) Brand new CAT transmission approx. 2000hrs ago.

CAT itself rebuilt the engine approx. 600hrs ago. Tires size x702

30.5 32 tire w/85% tread remaining. Dual arch with a winch. Being used everyday! No issues! Very nice machine! Clean and tight!

BELL

1990 Bell Super T - This Bell has Contact: JOE aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXTtranny 709 control, 33” bar, pump and 801-362-2170 ❘

 LumbermensCO.com

** CALENDAR**

‘97 Timberjack 240D Item ID: 13917

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

FOR CLASSIFIEDS 93’ Prentice 210

CallItem 888.401.MENS ID: 14216 Contact: AUSTIN See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Location of all equipment at Phone: 888-401-6367 EXT 703 Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started it All!

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO Danckaert Resaw - Roughly Fri, 25 August - Sat, 26 August 2011 JohnBand Deere 648H

‘99 Hydro-Ax 511 EX Item ID: 13799

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

been rebuilt, it has a 24foot in Contact:has AUSTIN Email: Austin@lumbermensco.com feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO

Thurs, 7 Sept - Sat, 9 Sept

MID-ATLANTIC

LOGGING & BIOMASS EXPO

j@lumbermens.co

Contact: SAM DESIGN DIRECTOR Email: Sam@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 702

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 2010 Vermeer HG6000 Columbia, TN 38402-1916 Horizontal Grinder (888) 401-6367

Item ID: 96128

AD SUBMISSIONS

765 HP C18 engine with 5000 hours Half of new chain May 6”, be4”,sent and apron 3 screens2” Extrato parts Call for more pictures!morris@lumbermens.co

Contact: POSTMASTER MARK Email: Mark@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 708 Lumberman's Exchange 702-875-2703 P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 16’itsCAT 545D Exchange, principles and Item ID: 14211 associates, are not held liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 703 ©2017 Woods Publishing

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

12’ John Deere 843K Item ID: 14212

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

Contact: AUSTIN Email: Austin@lumbermensco.comTHE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 703

feet a minute also has CLT presses.

Timber Harvester

ItemItem ID 13876. Austin x703 ID: 29211 S & W 125 Band Mill with

John Deere 1270D Timber Harvester, 6 Wheel with Dangle Head, TracksCaterpillar on Front, John Deere Motor, 12000hours hours, generator - Low well maintained

on the mill, electronic computer Set

Contact: DEMI Email: Demi@lumbermensco.com works,1 1/2" or 2" band, 22ft. Phone: (385) 335-4225

Cambridge, Ohio www.ohioforest.org

track

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

‘04 Fabtek 344B

Sam x702

** INFO LINK**

CARRIAGES & DRIVES

Item ID: JW-093430

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29 Item ID: 9901

'97 CAT 525 Original Cable Skidder

Detector's IncPulled . .............. 30 Bell's Machining ..................... 27OfMetal One A Kind. Has Never A Log. Owned By An Electric Company. Deal! Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26 Contact: SAM Buck Equipment (AIM) ........ 36 Mor bark ..................................... 9 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Corley Mfg .............................. 32 Multitek ................................... 12

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2004 Timbco 445EXL

sawyers cab, computer controls, Item ID: 14170

cabinet with electronic drives for 85% Undercarriage. carriage knees, husk including Contact: AUSTIN 48" bottom saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

2016 Tigercat 604 E 34 Great Lakes Mfg. ....................

Row Electric ............................LOW 20 Hours, Excellent Condition, Very Hard To Find Dozer. Sawmill Exchange .................. 11 Contact: SAM Select Sawmill .........................Email: 19 Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Smith Sawmill ........................... 4

Hahn Machinery ...................... 3 Item ID:55393

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Dyna Products ........................ 35 Empire Hydraulics ................... 8

Cable Skidder

D5H TSK

Item ID: 7098

Timbco 820D

Bought new in 2016. Has approx 1300 hours on it. Ready to go to work. Call for more Iron Bull ................................... 21 pictures!

Item ID: 18370 Union Grove Saw & Knife.. 2,06’37model Clam bunk forwarder with Cummins engine.

Kilgore Saw ............................. 22 Contact: WALKER Email: Walker@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 707

Universal Refiner ...................Contact: 23 AUSTIN

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Email: Austin@lumbermensco.com

www.BakerProducts.net WoodMizer ................................ l 888-401-6367 Phone: EXT 703 OR 931-797-8029 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

that up and down, with airbags, 07’goTigercat 724E Item two ID: 14218 it includes sets of Mcdonough

pressure guides. Top Casting wheel Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass is supported on both sides. This Phone: 888-401-6367 EXT 703 expo.com/ is an extremely accurate machine

Item ID: 99807

12k hoursJohn runs Williams great tight center (888) section 401-6367 ext. 701

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Morris Woods '94 CAT 518 (888) 401-6367 ext. 704 Grapple Winch morris@lumbermens.co

bells and whistles, its a production

Escanaba, Michigan

Woods Publishing

ADVERTISING SALES

ItemonID: 14217 10 hours this machine since it

Hot Springs, Arkansas www.arkloggers.com

“Precision Under Pressure”

PRENTICE 410EX

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Item ID: 3280

Tight machine, no issues! It sits on a Pitts-trailer and it's currently operating, everyday! Owner just installed a brand new grapple on July 11. A/C not working properly, tires tread 60%. Works and runs smoothly. READY TO GO!

Hitachi EX 120 Excavator

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170

Item ID: 25036

‘11 Tigercat 845C Item ID: 13927

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

'99 or 2000 Hitachi EX 120 excavator. Bucket with thumb. New rebuilt motor. Undercarriage 95% or better. Has two modes of operation, 24 volt and 12 volt. Does not rotate when in 24 volt mode but does in 12 volt mode. Not sure what that means. Was going to put on a logging attachment in place of the bucket but found another excavator with the attachment already in place and bought that instead.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘16 Halverson H140 Skidsteer (DEMO)

‘93 Barko 180B Item ID: 14077

‘93 John Deere Contact: Austin 548E

14083 x703 Ph: Item (888)ID: 401-6367 Item ID: JW-909632 Contact: AUSTIN Contact: J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703

‘94 Caterpillar 320 Item ID: 13936

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder 2012 Cat D6K XL

Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703

‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124

Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Sam x702

grapple, 5,000 original hours.

Firewood Processor - This is

‘83 John Deere 4850

a Chomper Model 16 PDA

‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

automatice firewood processor

with John Deere power unit with

Low mile Mack truck with low hour 05 hood 8000 extenda-boom tight continuous turntable, continuous grapple, truck low mile because it's hauled to chain conveyer, way splitter, jobs, everything on truck8and loader is in goodon working condition. Selling because he bought a ponsse 20,000lb goose neck trailer. Item ID Call for more pictures!

13916. Austin Contact: MARK x703

made the best valued log splitter. Handles logs up to 32”. Uses

Contact: TED new for $32,500. Item ID 13865.

but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294.

FIREWOOD PROCESSORS Comes with a set of tracks.

log deck. Has a hydraulic grapple,

 Issue 364 385

minor hydraulic leaks. Winch works good. Just a good workingowner machine. and It’s been working with every day One comes allweather permitting. It has tight pins, good tires, strong engine and transmission works great. manuals and receipts. Purchased

Item ID: Under 13911Carriage at Chipper - Cat

13HP Honda motor. Manual start

01’ Ponsee Bison in excellent condition. Runs great. Forwarder 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703

’99 Johngauges. Deere 648 GCuts Grapplelogs / Cableup skidder a few amp to has 16”.

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc

- Small manufacturer in PA has

Value! PA. Item ID 12062. Sam x702

Item Sam ID: 14109 Item ID 13644. x702

low panel includes JD hours. 648GControl Grapple Skidder Item ID: 54867 tach, oil pressure, water temp and

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Sam x702 or (801) 319-9351

Email: Mark@lumbermensco.com Best Value PortableEXT Log Splitter Phone: 888-401-6367 708 702-875-2703

Firewood Processor - This is a

homemade processor with a 10’

Sam x702

2004 Bandit Beast Model 4680 -

Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in

chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER

Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

(11.5K hrs) Comes with the 426 CTR delimber. Needs nothing. Clean tight, no slack, turn gear tight! Working everyday.

off onto a conveyor. This is a very

well built processor. Item ID 13820.

Item ID: JW-986495 Contact: J Williams 6x6401-6367 Pre Hauler Ph: (888) x701 Item ID: 75311

Item ID: 13920 Contact: Austin CAT 559C Ph: (888)Item 401-6367 ID: 269 x703

capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 1994 Barko 160B - Electric 801-362-2170 knuckleboom, 30' boom, 75hp

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘05 Gehl CTL 70

‘95 John Deere C6 Tree Farmer

 List  seLL  exchange  buy  save

motor, Rotobec continuous

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great.

Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with

Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

‘85 John BELL Deere 440D

Item ID: 12453 1990 Bell Super T - This Bell has AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

'01 John Deere 648G3 Item ID: 90899

The Tree Excellentthat Condition Low Price! Started Contact: SAMit All!

Email: Sam@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 702

published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

John Deere 437C SOUTHWEST FOREST PRODUCTS EXPO Item ID: 1020 Fri, 25 August - Sat, 26 August Prentice 384 with 2010 model with 8500 hours, comes with a bucksaw, Hot Springs, Arkansas Bucksaw & Delimber has never had a delimber mounted on it and primarily www.arkloggers.com Item ID: 14213

been used around a sawmill.

Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 931-797-8029

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Woods Publishing MID-ATLANTIC

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548G3

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

‘03 John Deere 748GIII

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

j@lumbermens.co

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

May be sent to morris@lumbermens.co

Buncher S & W 125 Band Mill with Item ID: 14079 Caterpillar generator - Low hours Contact: on the mill,AUSTIN electronic computer Set Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702 ‘05 Transport Trailers Custom Log Pup Item ID: JW-538174 CARRIAGES & DRIVES

Menominee Saw ..................... 29

Bell's Machining ..................... 27 Item ID: 13948

Metal Detector's Inc. .............. 30

‘98 611 Ex-Hydro Ax

sawyers cab, computer ‘05 CAT TK560 controls,

Corley Mfg .............................. 32

cabinet with electronic Item ID: 14004 drives for carriage Midwest Sharpening..............Contact: 26 SAM knees, husk including 48" bottom saw and 36" top saw Email: Sam@lumbermensco.com Morbark ..................................... 9 Phone: 888-401-6367 EXT 702 Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Force Mfg. ..................... 31 Contact: Brute AUSTIN Email: Austin@lumbermensco.com Buck Equipment (AIM) ........ 36 Send address changes to: Phone: 888-401-6367 EXT 703

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's CAT 517 Exchange,‘06 its principles and Item ID:held 13869 associates, are not liable for errors or omissions. Reproduction, Contact: in whole orSAM part, is prohibited with Email: Sam@lumbermensco.com out written consent. Phone: 888-401-6367 702 ©2017 WoodsEXT Publishing

is an extremely accurate machine

Baker ...................................... 5, 7

B & B Mfg. ............................... 18

POSTMASTER

Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

is supported on both sides. This

B. H. Payne .............................. 16

Contact: TED

AD SUBMISSIONS

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

pressure guides. Top Casting wheel

Cardinal HD Carriage Contact:2010 SAM Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 7021 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Teds@lumbermensco.com MAILING ADDRESS Email: Phone: 888-401-6367 EXT 701 or (801) 319-9351

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

Contact: AUSTIN

Item ID: 1865

Austin Woods 215,000 pound Cat 235bz knuckle boom with 50 foot (888) 401-6367 ext. 703 reach. Needs about $7K in repairs. austin@lumbermens.co

it includes two sets of Mcdonough

Item ID532 13876.CAT Austin x703 Feller

THE Email: PAUL Austin@lumbermensco.com BUNYAN SHOW Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

CAT 235 BZ

that go up and down, with airbags,

feet a minute also has CLT presses.

Lexington, Kentucky http://www.kfia.org/ 06’ Franklin Q80 Item ID: 14214 KentuckyWoodExpo.aspx

Item ID: 13851

10 ‘80 hoursJohn on thisDeere machine 540B since it Item ID: 11345 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production

Hahn Machinery ...................... 3

Tigercat 604

Hurst Boiler 14 Item............................. ID: 7436 Good rubber and less than 4000 hours, in excellent Iron Bull ................................... 21 condition!

Kilgore Saw ............................. 22 Contact: AUSTIN Email: Austin@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 703 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 437E The Paul Bunyan Show ......... 39

Item ID: 9508 Thomas Industrial Controls .....is 10 (1K hrs) Clean machine, everything tight.

STACKING RAC Ponsse Ergo Item ID: 7720

Union loweringGrove paymentsSaw ASAP & Knife .. 2, 37

12k frame hours, 2000 hours on new $30k Mercedes diesel engine, H73 head, head rotator just rebuilt, slewing system for crane rebuilt 2k hours ago, main pump resealed about 1k hours ago, comes with set of tracks! Currently working, buying newer. Call for more Pictures

Universal ................... 23 Contact:Refiner JOE Email: Joe@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 709l 801-362-2170

Contact: MARK Email: Mark@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 708 I S73.663.7711 800.S48.6914 702-875-2703

Owner is getting out of the logging business and

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

Williams This skidder has John 4700 original hours and comes with a winch. Cab has heat & ac, tires are ext. 23.1 26.701 In excellent (888) 401-6367 condition!

Danckaert Band Resaw - Roughly

in ve1y good condition, Cuts 130

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

Item ID:DIRECTOR 985 MARKETING

BANDMILLS & HEADSAWS

machine, with air strain conveyers

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

210D Knuckleboom Loader on Truck

2004 CAT 517 Grapple Dozer

Item ID: 6694

Item ID: 70690

cat 517 swing boom grapple, enclosed cab, heat/air air needs a recharge, 8’ 6 way blade, 24” pads, good rollers, good sprockets, needs pads and turner pins, 4554 hours, majority of the last 2000 hours have been grading behind an excavator, very little logging. Call for pictures and video!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

'94 Barko 160 Knuckleboom Item ID: 14186

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

replaced motor last year, 12,817 frame hours, leak on valve bank o ring, everything works as should, needs AC recharge, slasher grind saw 60"circle saw, truck runs good, clutch is a little loose, Is plumbed for groundsaw, new blower, 4x6 square tubing secures loader to frame, trailer frames great loader and truck! Item ID: JW-909632

Contact:MARK J Williams Contact: Ph: (888) 401-6367 x701 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

‘93 Barko 180B

Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘08 John Deere 335C Item ID: 14089

‘95 John Deere C6 Tree Farmer

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Item ID: 13885

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

off onto a conveyor. This is a very

well built processor. Item ID 13820.

“13 KMC 2500 Tack Skidder Item ID: 14078

Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'09 John Deere 753J Buncher ID: 14106 chainItem conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Contact:20,000lb AUSTINgoose neck trailer. Item ID Email: Austin@lumbermensco.com 13916. Austin x703 Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 Best Value Portable Log Splitter

with 1700 hours, in very good

condition. Easily produces high

- Small manufacturer in PA has

made the best valued log splitter.

‘00 Timbco quality chips with patented ‘Cone’ Handles 445D logs up to 32”. Uses Item ID: 14096 drum design. Can easily load 42’ 13HP Honda motor. Manual start

Contact: AUSTIN vans and produce 6 - 8 loads per but electronic option is available. Email: Austin@lumbermensco.com day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 EDGERS & GANGS adjustable to single two way. Great Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor 2015 Cat 525Dwith a 10’ ItemHas ID: a14167 log deck. hydraulic grapple,

Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off - It has a 353 Detroit diesel, 40Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks  Issue 364 385

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

‘09 John Deere Firewood Processor - This is 650J XLT

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID

‘95 Bell Ultra T

a Chomper Model PDA Item ID: 16 14091

automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes

13238. Chris x700 Item ID: 14070

1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started

good. in good working order. 22in tach, oil pressure, water temp CAT and D4H TSK Cable Dozer w/Log Arch amp gauges. Cuts logs Equipment up to 16”.

kohing head. headItem works ID:great. 47648

Item ID 13185. Sam x702 One owner and comes1997 with all D4H TSK series 3, 7936 true hours, tracks and undercarriage approx 90% en-

cab with heat, winch/log arch, dry machine, complete cat service on all filters, 1999 Barko 160D - new engine with manuals and receipts. closed Purchased fluids, checked hoses and everything. Call for more pictures!

approximately 1500 hours. Hour

new for $32,500. Item ID 13865. Sam x702

Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708 or 702-875-2703

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

as a backup as needed. Has a CTR

'92 CAT 518C Cable Skidder

delimber, has been rebuilt. Itemgrapple ID: 14107 Boom cylinders have minor leaks. Chipper - Cat Under Carriage at Hard to Find “C” model in great shape! Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc

Contact: 94AUSTIN Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple. Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam

‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL

Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production

 List  seLL  exchange  buy  save

❘

 LumbermensCO.com

** CALENDAR**

Quadco 2900 Intermittent Head FOR CLASSIFIEDS Item ID: 32295

Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at Contact: MARK Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708 www.LumberMB\ISmagazine.com or 702-875-2703 Intermittent Saw Head 2900 Quadco, great working condition, completely gone through recently, new teeth on disc saw, hoses and fluids checked.Call for more pictures!

www.starwebhosting.net/woodsmen/

The Tree

2010that Tigercat 724E Started

BANDMILLS & HEADSAWS SOUTHWEST FOREST PRODUCTS EXPO TIMBERJACK 460D / 648G III Danckaert Band Resaw - Roughly Fri, 25 August - Sat, 26 August Item ID: 34900

‘93 Barko 180B

it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

MID-ATLANTIC

LOGGING & BIOMASS EXPO

(888) ID: 401-6367 Item 43042

AD SUBMISSIONS

2007 John Deere 548G3 Grapple Skidder, 10,073 hours. Excellent condition, pictures show float tires but machine will come 28L's at 70% or better, completeto service on all fluids May be sent and filters done 16 hours ago, bushing and pin in turn cylmorris@lumbermens.co inder was replaced, everything else is tight, dry, and strong. Call for more pictures and video!

POSTMASTER

Contact: MARK address changes to: Email:Send Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Lumberman's Exchange 702-875-2703

P.O. Box 1916 Columbia, TN 38402

& 4 in 1 bucket. Selma, North Carolina www.midatlantic-logging-biomass Contact: AUSTIN Email: Austin@lumbermensco.com expo.com/ Phone: 888-401-6367 EXT 703 OR 931-797-8029

B & B Mfg. ............................... 18

CAT D6H Grapple Dozer16 B. H. Payne .............................. Item ID: 49272 Baker ...................................... 1986 D6H grapple dozer, approx 5700 hours,5, cur-7

pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate700J machine JOHN DEERE Item ID: 2212 in ve1y good condition, Cuts 130 ('08) (4.5K hrs) One owner only, bought brand

Cambridge, Ohio www.ohioforest.org

** INFO LINK**

it includes two sets of Mcdonough

feet a minute also has new in '08, undercarriage 60%.CLT Has anpresses. issue with

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

MAILING ADDRESS

that go up and down, with airbags,

one or two pins on the rail that needs fixing. $2.5-$4K, therefore the cheap price. All maintenance has Sbeen &W 125 Mill with done on Band time. Reason for selling is owner needs to lower his overall monthly payments.

Item x703 QuotesID we13876. receivedAustin range between

Caterpillar generator - Low hours

Contact: JOE on the mill, electronic computer Set Email: Joe@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 709

801-362-2170

Cat 3406 140KW Genset, 12,400 hours ready to run.230A Item ID 13434. TIMBERJACK

Item ID: 9450 Sam x702

CARRIAGES & DRIVES

1989 Model with factory 5.9 Cummins engine, power shift transmission, Hercules winch. Working daily.

2010 Cardinal HD Carriage

Contact: AUSTIN Carriages (Sawmill) - Cardinal Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Carriage line it includes carriage

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

with onboard log turners, carriage

drive, hyd pac2s for carriage, Kubota SVL-95 Item ID: 4861 Menominee Saw .....................This 29is in LIKE-NEW sawyers cab, computer controls, conditions. Only 420hrs. It’s currently on a small

rently working, everything on it is in good working Bell's tracks/undercarriage Machining ..................... 27 condition, approx 75% recently had a new oil cool put on it. Call for more pictures and video! Force Mfg. ..................... 31 Brute

A/C - heat works.electronic It has the load sensing for closed with drives Metal Detector's Inc. ..............controls, 30 radio,cabinet center hydraulics with parallel loader control valve. Very tight machine. In addition to the diamond forestry mulching head, carriage knees, husk includingowner Midwest Sharpening.............. 26

Contact: MARK BuckMark@lumbermensco.com Equipment (AIM) ........ 36 Email: Phone: 888-401-6367 EXT 708 Corley 702-875-2703 Mfg .............................. 32

Multitek ...................................Phone: 12 888-401-6367 EXT 709 OR 801-362-2170

CRD Metalworks .................... 25 Item ID: 5627 The Lumberman's Exchange is (11K hrs) Ledgering CW Mill-ArmorHog .............. 17 system doesn’t work, trail wheel needs to be

Timbco 425

published monthly by Woods fixed. It does has new wiring and a new sensor. The undercarriage is at 40 with a 5.9 engine. A/C - heat works! There's a computer glitch CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, (waiting to be fixed) where to tip the head back, you have to hit another function and then the head will move back. The computer Columbia, TN 38402. All rightssystem has been checked and re-calibrated by Woodland Equipment Dyna Products ........................ 35 reserved. All editorial/ advertorial in (MI) 18mo. ago. It has a Risley processing head. submissions are used at the Contact: JOE Empire Hydraulics ................... 8 discretion of the publisher and Email: may Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of Bell Ultra C content submitted by advertisers Hurst Boiler ............................. 14 Item ID: 1025 and writers, the Lumberman's Exchange, its principles and 1996 model with Joystick control and Koehring Iron Bull ................................... 21 associates, are not held liable for Head. errors or omissions. Reproduction, Kilgore Saw ............................. 22 Contact: AUSTIN in whole or part, is prohibited with Email: Austin@lumbermensco.com Lignomat ................................. 24 out written consent. Phone: 888-401-6367 EXT 703 OR 931-797-8029 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

job. Owner doesn’t need it any longer. It has high flow joystick

is including a blue diamond grapple and a bucket.

48" bottom saw and 36" top saw Contact: JOE Morbark ..................................... 9 Email: Joe@lumbermensco.com

Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

07’ Tigercat 620C

Union Grove Saw Knife.. 2, 37 Item ID:&14248 Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

848 G Grapple Skidder Item ID: 85843

2003 - 848 Grapple / cable – dual arch. Excellent condition, used daily. 35.5 tires at 40-50%. Tight center section and pins. Dual arch with winch. Call for more pictures

Contact: TED Email: Teds@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 701 I S73.663.7711 800.S48.6914 or (801) 319-9351

❘ L!  (888) 401-MENS 401-MENS

NO. 31

L O G G I N G

Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029

Box 1916 JohnP.O. Deere 548G3 Columbia, TNSkidder 38402-1916 Grapple

Item ID: 6056& BIOMASS MID-ATLANTIC LOGGING Fri, 15 Sept - Sat,comes 16 Sept 2007 model with 5400 hours, with log forks,

Lexington, Kentucky Item ID: 7060 http://www.kfia.org/ 2007 model with 5634 original hours comes with KentuckyWoodExpo.aspx two year old 16’ bucksaw.

Item ID: 410

John Williams 95’ long frame with JD winch.ext. Skidder is in excel(888)model 401-6367 701 lent condition. j@lumbermens.co

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

machine, with air strain conveyers

KENTUCKY WOOD EXPO Fri, 15PRENTICE Sept - Sat,2210 16 Sept

Timberjack 380C MARKETING DIRECTOR

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Escanaba, Michigan

CAT 928G

Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours onnothis (‘05) pins and bushings all good, leaks,machine motor rebuiltsince approx. it 2.5K hrs ago, T/C (no direct drive). Two new back tires, front tires 35%. JD hasgrapple beenonrebuilt, it hrs, hasnew a injection 24footpump in 748G model bigger it. 13K frame 8mo. ago, new ECU. A/C - heat good!

feed deck 20 foot out feed deck Contact: AUSTIN 72ND ANNUAL GREAT LAKES Contact: JOE Email: Austin@lumbermensco.com Email: Joe@lumbermensco.com with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 709 OR 801-362-2170 Phone: 888-401-6367 EXT 703 Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

PUBLISHER

ADVERTISING SALES

Hot Springs, Arkansas www.arkloggers.com

Item ID: 14077

Item ID: 14247

John Deere 550G Dozer

“Precision Under Pressure”

650 G Dozer

Phone 315.284.4126Item ID: 85744 Fax John Deere 550G dozer, caged cab, 6 way blade, 22" pads, strong mo315.849.2045 tor, good transmission, tracks/undercarriage approx 90% Call for more Website pictures! www.empirehyd.com Email Contact: MARK info@empirehyd.com

Item ID: 53699

1998 650g John Deere 10,069 hours. With winch. Undercarriage - 70%. New transmission at 7500 hours. It has air ride seat. New c-frame bushing less than 250 hours on them. It works every day. No issues.

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

‘93 Barko 180B

‘16 Halverson H140 Item ID:Grapple 14077 Tree Farmer - Cable Contact: Austin Item ID: 37092 Skidsteer (DEMO) Skidder

L O G G I N G

Ph: (888) 401-6367 x703 Hrs. unknown, but has not been used a lot. Pins and everything Item ID: JW-909632 tight. Starts very easy even in cold weather without ether. Very fuel efficient. Small hydraulic leak. 23 X 32 tires. Set of almost new Contact: J Williams chains. Has owned it for 4 -5 yrs. Ph: (888) 401-6367 x701

Tigercat 234 Knuckle Boom Loader Item ID: 68516

2012 Tigercat 234 loader, 7271 hours, with 264 ultra CSI delimber, on Kodiak series 3 hydraulic trailer, with 56" big grapple, very well kept, regular maintenance every 300 hours, greased often, everything is tight, dry machine ready to go. Call for more pictures! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Cat D6M Dozer Item ID: 71062

Tigercat 615C

Caterpillar 2001 D6M XL Dozer Enclosed cab with heat and A/C, new undercarriage, Low original hours, high track, comes with winch and rops, Well maintained, everything is clean and tight.

2013 model with only 600 hours in like new condition, with size 30,5 tires.

Contact: DEMI Email: Demi@lumbermensco.com Phone: (385) 335-4225

Timberpro TL735B Tracked Feller Item ID: 64107 Buncher 735B approx 11k hours, rails and undercarriage approx 70% or better, heat/AC everything is in good working order, very well maintained, 13428 Victory Ln. // POgoodBox 124 completely gone through in October, new fluids all around, new filters, new hoses(about $3k worth) some cylinders replaced, some repacked. Call for Adams Center, NY 13606 more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

John Deere 700H Item ID: 1324

13000 frame hours with a New undercarriage. No blow by, and doesn’t use any oil

‘05 Gehl CTL 70

Contact: AUSTIN Email: Austin@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 703 OR 931-797-8029

S A W M I L L

‘83 John Deere 4850

Contact: J Williams Ph: (888) 401-6367 x701

'02 Woodmizer LT-40 Super HD

Item ID: 14118 chain conveyer, 8 way splitter, on Has the Kubota Diesel Motor! Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Contact: AUSTIN 13916. Austin x703 Ph: (888) 401-6367 x703Email: Austin@lumbermensco.com Phone: Best 888-401-6367 EXT 703 Value Portable Log Splitter

day. Item ID 13882. Austin x703

EDGERS & GANGS Meadows 2 Deluxe Sawmill

Brewco Saws - Two Brewco Saws Item ID: 80412

in excellent Runs great. deluxe new onboardcondition. computer, hydraulic cab control, 3 saw

miner edger, dual chain for sawdust from edger, 6 cylinder Cummins power unit, sawdust conveyer with electric Item ID275hp 13644. Sam x702 motor, 24’ live log deck, comes with good 48” and 52” blades, saw wrench, electric jockey grinder for teeth, chain log turner, mill is on wheels and is portable, 14,000 board foot sawed in 9 hours with this mill!

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor -Contact: It hasMark@lumbermensco.com a MARK 353 Detroit diesel, 40 Email:

Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot 702-875-2703

 Issue 364 385

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

TimberPro 735B Item ID: 52609

Item ID: 14078 (‘08) (6.7K hrs) 8.3L Cummins engine w/Rolly 2 processor head. U/C Contact: Austin 50%, enclosed cab, leveling cab, A/C - heat works. It can also be capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 purchased without the ROlly 2 head

BARKO

Contact: JOE Email: Joe@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 709 OR 801-362-2170

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

Hud-Son 360 Portable Sawmill grapple, 5,000 original hours. Item ID: 8841 (excellent condition.). Item ID

Hud-Son Portable Sawmill year 2016 1000 hours model H360 35 HP motor13238. HydraulicChris Log Dog Hydraulic Back Stop Sterling x700 ProCut saw blade 13Ft 11in 7/8 TS/ 1 1/4 PV 121 Peavy Hook

automatice firewood processor

1995 Barko 775 B Feller Buncher

Contact: TED

Email: Teds@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 701 or (801) 319-9351

low hours. Control panel includes tach, oil pressure, water temp and

on injection pump. always started

good. in good working order. 22in

‘05 Woodmizer LT300

kohing head. works great. Item ID:head 14031 Item ID 13185. Sam x702 One owner and comes with all Contact:1999 AUSTIN Barko 160D - new engine with manuals and receipts. Purchased Email: Austin@lumbermensco.com approximatelyEXT 1500703 hours. Hour new for $32,500. Item ID 13865. Phone: 888-401-6367 931-797-8029 meter dont work. The last 2 owners Sam x702 amp gauges. Cuts logs up to 16”.

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per

‘13 KMC 2500 Track Skidder

have only used it to load trucks or

- Small manufacturer in PA has

drum design. Can easily load 42’

‘95 John Deere C6 Tree Farmer

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING EQUIPMENT BANDIT

with 1700 hours, in very good

condition. Easily produces high

Item ID: 17058

made the best valued log splitter. 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

'16 LT40 Super Hydraulic

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a Item ID: 9903

homemade processor with a 10’ One Owner! 136 hours, Tons of log deck. Has Priced a hydraulic grapple, Extra Parts. cheap! chain and kicker that all runs off Contact: SAM ofEmail: a 4 cylinder Mercedes power Sam@lumbermensco.com unit. Has 888-401-6367 a 4’ chain saw that Phone: EXT kicks 702

Lumbermens™  since 1986

❘

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

Talon 900 Edger

2004 Bandit Beast Model Item ID: 69924680 -

3412 Caterpillar Diesel engine 2016 Timberking talon 900 3 blade edger, only 6 hours, $16,995.00 new, Gas engine 24.5 hp Koehler. Fully por-

with 850 5300 Mill in table, like newHP. Call for more hrs. pictures.

good condition. Just finished 10 Contact: MARK Email: Mark@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 708 Remote control. Big production 702-875-2703

 List  seLL  exchange  buy  save

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Desjardin Shingle Mill

Runs Great!. Item ID 13740. Sam Item ID: 43905 x702

Good shape. Bought it 30 yrs ago from another owner. It did not get much use. Only used it to make shingles for his home.

BELL

1990 Bell Super T - This Bell has Contact: TED

aEmail: brandTeds@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 701

control, 33” and tranny or bar, (801)pump 319-9351 ❘

 LumbermensCO.com

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

Precision Scragg Item ID: 3607

Precision Scragg, excellent condition, Themotor, Tree 40 hp twin saw 4,6,8,and 10 inches, canthat send Started video of it running, Va Area

it All!

Contact: TED Email: Teds@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT 701has published or (801) 319-9351 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

SOUTHWEST FOREST PRODUCTS EXPO '02 WoodMizer LT-40 Fri, 25 AugustItem - Sat,ID:2611345 August Hot Springs, Arkansas Kubota Diesel engine. www.arkloggers.com

Sanborn Scragg Mill Item ID: 14050

Contact: AUSTIN Contact: AUSTIN 72NDEmail: ANNUAL GREAT LAKES Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT Phone: 888-401-6367 EXTEXPO 703 Phone: 888-401-6367 EXT 703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

Edmiston Complete Sawmill Package MID-ATLANTIC LOGGING & BIOMASS Item ID: 14084

Woods Publishing

Contact: AUSTIN MID-ATLANTIC ADVERTISING SALES Email: Austin@lumbermensco.com LOGGING & BIOMASS EXPO Phone: 888-401-6367 EXT 703

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

Fri, 15 Sept - Sat, 16 Sept

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Corley Double Arbor 8” Gang

Lexington, Kentucky LT70 ‘06 Woodmizer

Item ID: 46421

John Williams http://www.kfia.org/ Electric Has machine chromeknerld rolls. Big door that opens up (888) 401-6367 ext. 701 KentuckyWoodExpo.aspx Item ID: 14076 for top and bottom arbor. j@lumbermens.co AUSTIN DESIGN DIRECTOR Contact: Email: Austin@lumbermensco.com

Donna Heninger

Phone: 888-401-6367 EXT 703 OR 931-797-8029

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

AUSTIN THE Contact: PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703

Jocar Horizontal Band Mill

Cambridge, Ohio www.ohioforest.org

Item ID: 92211

** INFO LINK**

Has Jocar computer setworks, has run around system, runs 8” or

Austin Woods 10” wide band. Could be used as Slab saw, horizontal saw, or run (888) 401-6367 ext. 703 around resaw. austin@lumbermens.co Contact: AUSTIN

MAILING ADDRESS Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 OR 931-797-8029

B & B Mfg. ............................... 18 P.O. Box 1916 Columbia, TN 38402-1916 H. Payne .............................. 16 (888) 401-6367 PrecisionB.Scragg Item ID: 3607

Baker ...................................... 5, 7 AD SUBMISSIONS Excellent condition, 40 hp twin saw motor. The saw motors are 40HP 1780 RPM currently wired for 480v.—-spinning May be sent to Lincoln Bell's ..................... 36 inch F pattern circle Machining saws. The hydraulic power pack is27 a

10Hp motor also 480V. Scragg will handle 12 foot and up to 14 morris@lumbermens.co

POSTMASTER

inches in diameter easy. Scragg in great shape. has been run Brute Mfg. ..................... 31 very little. Can send videoForce on request.

Send address changes to: Contact: TEDBuck Equipment (AIM) ........ 36 Email: Teds@lumbermensco.com Lumberman's Exchange Phone: 888-401-6367 EXT 701 or (801) 319-9351 32 Corley Mfg .............................. P.O. Box 1916 Columbia, TN 38402 CRD Metalworks .................... 25

Frick #1 Jumbo Mill

The Lumberman's Exchange is ID: 200 CW Item Mill-ArmorHog .............. 17 published monthly by Woods Complete operation that includes ................... a meadows CW Mill-Hogzilla 15 Publishing, P.O. Box 1916, edger, HMC V206 Debarker, 48” Chipper, blower, live decks, and many other spare parts. Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Empire Hydraulics ................... 8 Email: Austin@lumbermensco.com discretion of the publisher and Phone: may 888-401-6367 EXT 703 OR 931-797-8029 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn ...................... been made to ensure accuracy of Quality 4 Machinery Head Trim Saw 3 content submitted by advertisers Item ID: 1559 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Ready to run, operates from either end, Va Area Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Contact: TED Kilgore Saw ............................. 22 Email: Teds@lumbermensco.com in whole or part, is prohibited with Phone: 888-401-6367 EXT 701 Lignomat ................................. 24 out written consent. or (801) 319-9351 ©2017 Woods Publishing

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33 Menominee Saw ..................... 29

Corley Complete Sawmill Metal Detector's Inc. .............. 30 Item ID: 14035 Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 Piper's Saw Shop.................... 13 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it

Danchaert Band Resaw

has been rebuilt, it has a 24foot in Item ID: 13876 feed deck 20 foot out feed deck Contact: AUSTIN Email: with 44Austin@lumbermensco.com inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

‘14 Hurdle 3-HD

S & W 125 Band Sawmill Mill with Block Item ID: 13997 Caterpillar generator - Low hours on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls,

‘13 Woodmizer 4000drives Sawmill cabinet with electronic for Item ID: 14000 carriage knees, husk including Contact: 48" bottomAUSTIN saw and 36" top saw Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

STACKING RAC

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

LT40 Union Wood-Mizer Grove Saw & Knife .. 2, 37 Item ID: 13995 Universal Refiner ................... 23 Contact: AUSTIN Email: Austin@lumbermensco.com WoodMizer ................................ l Phone: 888-401-6367 EXT 703

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

Hurdle #2 Sawmill Item ID: 8720

2016 Complete sawmill package, includes precision chip pack, 80ft vibrating conveyer, HMC Debarker, Morgan Slab edger, 3 strand log deck, and more.

Contact: AUSTIN Email: Austin@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 703 800.S48.6914 I S73.663.7711 931-797-8029 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

Phone 315.284.4126 Fax 315.849.2045Item ID: 13956 Website Contact: AUSTIN www.empirehyd.com Email:Email Austin@lumbermensco.com info@empirehyd.com Phone: 888-401-6367 EXT 703

Woodmizer Twin Blade Diesel Edger

‘08 Timberking B20

“Precision Under Pressure”

Item ID: 14191

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

S A W M I L L

‘93 Barko 180B

‘16 Halverson H140 Item ID: 14077 Cornell Edger Austin Item ID: 33423 Skidsteer (DEMO)Cornell edgerContact: size 4”-27” edger, with infeed table. Has (888) laser arch onPh: top of edger. 401-6367 20 HP electric x703 motor. Selling Item ID: JW-909632 because it hasn’t been used much. Call for more pictures. Contact: J Williams TED Ph: (888) 401-6367 x701 Contact: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

Woodmizer LT300

Sawmill

Item ID: 7566

Item ID: 30151

Approx 5000 includes, infeed conveyer, log deck, and 50’ x 8’ greenchain, command control center, accuset set works, good mill 30 HP 3 phase electric motor. Call for more pictures!

4 cylinder Perkins Motor, 30” wheels (29” cut width). Handles logs 3’ to 23’ . Built by an Amish fellow that use to do a lot of these. It is about 10-15 yrs old. Runs great. Doesn’t have any hydraulic assist. Selling to upgrade.

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

03’ Woodmizer LT-300 Operation Item ID: 14171

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘05 Gehl CTL 70

Contact: TED Email: Teds@lumbermensco.com Phone: 888-401-6367 EXTJW-986495 701 or (801) 319-9351 Item ID:

Contact: J Williams Ph: (888) 401-6367 x701

MISCELLANEOUS

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter

with 1700 hours, in very good

- Small manufacturer in PA has

condition. Easily high ‘96 Jeep C-5produces Wrangler

Item ID:patented 1675 ‘Cone’ quality chips with

drum Can, 132K easily load 42’ ‘96 Jeepdesign. C-5 Wrangler miles, 4 cylinder, automatic trans.

vans and produce 6 - 8 loads per Contact: day. Item TED ID 13882. Austin x703

FIREWOOD PROCESSORS 2003

2010 Shop Built Wood

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Kenworth T-800

homemade processor Item ID: 87370 with a 10’ log deck. Has a hydraulic grapple, Kenworth T-800, Complete overhaul, very well

maintained, Cat C-15,and 18 SPD. Chalmer Suspension, 246” Processor chain kicker that all runs offWB, 40k Rears 2SPD. Cascade Trailer, Electric Scales, 8’6” Bunks

- It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 385

1996 Peterbilt 378 complete overhaul, in 13HP Manual excellentHonda condition,motor. well maintained. Cat start 3406 E, 15 SPD, Air trac Suspension, 246” WB, 40K Rears, but electronic option is8’available. Peerless Trailer, Electric Scales, 6” Bunks

Contact: DEMI Email: Demi@lumbermensco.com adjustable to single two way. Great Phone: (385) 335-4225

Brewco Saws - Two Brewco Saws Item ID 13644. Sam x702

Item ID: 59687 Handles logs up to 32”. Uses

Has Log Lift. Uses 4-way wedge

Email: Teds@lumbermensco.com Phone: EDGERS 888-401-6367 EXT 701 & GANGS or (801) 319-9351

in excellent condition. Runs great.

Peterbilt 378 made the best valued log splitter.

of a 4 cylinder Mercedes power

Contact: DEMI Email: Demi@lumbermensco.com unit. Has a 4’ chain saw that Phone: (385) 335-4225

Lumbermens™  since 1986

❘

kicks

Firewood Processor - This is a Chomper Model 16 PDA automatice firewood

Item ID: 6307

1995 model with automatic setworks, variable speed feed & hydraulic conveyer.

capacity!. Item ID 13421. Sam x702 Contact: AUSTIN BARKO Email: Austin@lumbermensco.com Phone: 888-401-6367 1994 Barko 160B - ElectricEXT 703 931-797-8029 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

1996 grapple, Jackson Shavings Mill 5,000 original hours.

Sam x702

Trim Saw - 12000 10 HP motor on cutoff blade, 5 HP motor on feed chain. Like new, less than 200 hrs

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 14078#2 Deluxe Meadows Contact: Austin Item ID: 14250 Ph: (888) 401-6367 x703

well built processor. Item ID 13820.

Item ID: 5461

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703Saw Cornell Double End Trim

‘13 KMC 2500 Track Skidder Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 off onto a conveyor. This is a very

Cutoff Trim Saw

‘83 John Deere 4850

‘95 John Deere C6 Tree Farmer

Item ID: 1271 (excellent condition.). Item ID

Model 30D6

13238. Chris x700

Contact: AUSTIN 1995 Barko 775 B Feller Buncher processor Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

with John Deere power unit with

low hours. Control panel includes

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. tach, oil pressure, water temp and1999 International 910022in Item ID:head 33563 kohing head. works great. amp gauges. Cuts logs up to 16”.

Item ID 13185. Sam x702 One owner and comes with all1999 International 9100. C-10 motor. 8000 Serco loader continuous rotate. Like new tires. 720,000 miles. Dual fuel

Barko 160D - new engine manuals and receipts. Purchased tanks, fairly 1999 new clutch. Truck overall is in good shapewith approximately 1500 hours. Hour new for $32,500. Item ID 13865. Contact: TED Sam x702

Email: Teds@lumbermensco.com meter dont 2 owners Phone: 888-401-6367 EXTwork. 701 orThe (801)last 319-9351

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

Paccair Winch 3412 Caterpillar Diesel engine Item ID: 86536 with 850 HP. 5300 hrs. Mill in

Paccair Winch = Model PA56-E10. Works great.

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

‘84 Kenworth Runs Great!. Item ID 13740. Sam Item ID: 54167 x702 BELL

Log truck ‘84 Kenworth - 440 Bitcam Cummins, 15 speed overdrive, panel hitch, 24.5 tires. Also available, an additional trailer shown in picture.

good condition. Just finished 10

1990 Bell Super T - This Bell has

Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 Remote control. Big production or (801) 319-9351

Phone: 888-401-6367 701 control, 33” bar, pumpEXT and tranny

Contact: TED job, ready to work! Acre clearing

 List  seLL  exchange  buy  save

TEDDuetz engine. Lever aContact: brand new Email: Teds@lumbermensco.com

or (801) 319-9351

❘

 LumbermensCO.com

** CALENDAR**

MorbarkFOR Chipper Item ID: 43812 CLASSIFIEDS

Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELD Fri, 18 August - Sun, 20 August Location of all equipment at Contact: TED Boonville, New York Email: Teds@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 6 knife - 58” chipper with 3 pocket blanks in it. 2nd owner.... 1st owner could not make payments so Morbark bought it back. Was like new 5 years ago when 2nd owner DAYS purchased it.

www.starwebhosting.net/woodsmen/

Samsung SL150 Wheel Loader Item ID: 98970

Model SL150, articulating wheel loader with enclosed cab, forks and bucket, 158 HP Cummins diesel. Very nice. Mid 90’s machine but very well maintained. Compares to JD 644. Weight 29,800. Call for more pictures!

The Tree that Started it All! Contact: MARK

Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT has 708 Since 1986, Lumbermens published 702-875-2703 a monthly circular

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Woods Publishing

BANDMILLS & HEADSAWS Precision Chipper SOUTHWEST FOREST PRODUCTS EXPO 2005 Peerless 45’ Walking Floor - Roughly Item ID: 4524 Fri, 25 August - Sat, 26 August TrailerDanckaert Band Resaw Item ID: 83112 Hot Springs, Arkansas www.arkloggers.com

66 inch ReBuilt Precision Chipper good shape

Contact: TED 72ND ANNUAL GREAT LAKES Email: Teds@lumbermensco.com Contact: MARK with 44 inch wheels, and all the Phone: 888-401-6367 EXT 701 LOGGING & HEAVY EQUIPMENT EXPO Email: Mark@lumbermensco.com or (801) 319-9351 Phone: 888-401-6367 EXT 708 or 702-875-2703

Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

'08 Dynamic Chipper Item ID: 14196

MID-ATLANTIC LOGGING & BIOMASS 2008 conehead dynamic chipper model 585 1762 hours great Fri, 15 Sept - Sat, 16 Sept condition 500 hp john deere comes with $2k worth of new knives

Morris Woods Phone: 888-401-6367 EXT 708 or 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR '99 Peterbilt Road Tractor

KENTUCKY WOOD EXPO Fri, 15 Sat, 16 Sept 35Sept Ton- Lowboy Trailer

Lexington, Kentucky Item ID: 95716 http://www.kfia.org/ 35 Ton lowboy trailer. New brakes, new drums, KentuckyWoodExpo.aspx new bearings and seals.

John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN

DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 Morbark Chipper (888) 401-6367

Item ID: 80356

AD SUBMISSIONS

TED THE Contact: PAULTeds@lumbermensco.com BUNYAN SHOW Email: Phone: 888-401-6367 EXT 701 Fri, 6 Oct Sun, 8 Oct or (801) 319-9351

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16 Item ID: 28802 Baker ...................................... 5, 7

Meadows Mill, Inc. ................ 33

855 Cummings 350 KW

Morbark 58” LIKE NEW

Menominee SawID: ..................... 29 Item 6114

Totally rebuilt 58 inch real May by be pro. sent to clean nice piece.

855 Cummings 350kw gen set enclosed with belly tank. 300 original hours since new. Bell's Machining ..................... 27 Other generators available.

Metal . .............. 30 2 vibratingDetector's conveyer, it is aInc 2017 model with only

Contact: TED POSTMASTER Email: Teds@lumbermensco.com Send address changes to: Phone: 888-401-6367 EXT 701 Lumberman's Exchange or (801) 319-9351

Brute Force Mfg. ..................... 31 Contact: TED Email: Buck Teds@lumbermensco.com Equipment (AIM) ........ 36 Phone: 888-401-6367 EXT 701 Corley Mfg or (801) 319-9351 .............................. 32

Midwest Sharpening.............. 26 Contact: AUSTIN Mor bark ..................................... 9 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Multitek ................................... 12 931-797-8029

morris@lumbermens.co

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have CAT 3412 - 600KW Prime been made to ensure accuracy of Item ID:by 85729 content submitted advertisers and writers, the Lumberman's Has 233 original hours & 1 hour running time on Exchange, its principles andWill do load new sleeves, pistons, & bearings. associates, are not held liable for test before loading. errors or omissions. Reproduction, Contact: in whole TED or part, is prohibited with Email: Teds@lumbermensco.com out written consent. EXT 701 Phone: 888-401-6367 or©2017 (801) 319-9351 Woods Publishing

This chipper comes equipped with chip pack and 20’ hours on it! In like new condition!

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

CAT D349 Gen 2 Great Lakes Mfg. .................... 34

Item ID: 227 Hahn Machinery ...................... 3

Marathon Generator 208-220-230-240V, 480V transfer box, includes control panel, Hurstsafeties, Boiler ............................. 14 engine governor, dual electric starter, 750KW/60HZ, 887KVA, load tested/ serviced, 940 ................................... original hours, 1100hp diesel. Iron Bull 21 Several other generators also available

Kilgore Saw ............................. 22

Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701 or (801) 319-9351

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Smith Sawmill ........................... 4 The Paul Bunyan Show Blockbuster 1412......... Plus39 Item ID: 958 Thomas Industrial Controls..... 10

bells and whistles, its a production

in ve1y'93 good condition, Cuts 130 KW 425 CAT Item ID:13342 feet a minute also has CLT presses.

Item 13876. Austin x703Inframe withIDten speed 220 twenty four feet of frame beS & W 125 Band Mill with hind the cab Caterpillar generator - Low hours on the mill,WALKER electronic computer Set Contact: Email: Walker@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 707 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

2016 Barko Tree Chipper

sawyers cab, computer controls, Item ID: 16688

cabinet with electronic drives for

150 hours. 550 Cimmins engine. Can handle

trees up toknees, 22 incheshusk in diameter. carriage including

48" bottomTED saw and 36" top saw Contact: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

STACKING RAC Freightliner 1990 Item ID: 1990

Comes with 8 way and 6 was& splitting head. Machine Union Grove Saw Knife .. 2, 37 is

MILES-322,470 CUMMINS motor with Jake brake 9 speed Eaton fuller Air ride over spring suspension 11.22.5 fair tires 15’ 10” of frame from cab back Had A.C. but doesn’t work. Originally had a water tank on it.

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com WoodMizer ................................ Phone: 888-401-6367 EXT 703l 931-797-8029

Contact: TED Email: Teds@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 701 I S73.663.7711 800.S48.6914 or (801) 319-9351

2015 model with PLUS package and only 50 hours on it. in like new condition.

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

new drum with about 6o hours inch thick heavy duty skin

MID-ATLANTIC MARK ADVERTISING SALES Contact: LOGGING & BIOMASS EXPO Email: Mark@lumbermensco.com

Donna Heninger

10 hours on this machine since it

peerless 45’ walking floor, refurbished, dot tagged, couple slats on thehas verybeen end are knickedituphas a bit, breaks good, rebuilt, a 24foot in tires decent, overall good condition, 96” wide. Call for more pictures! feed deck 20 foot out feed deck

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

1990 Freightliner Item ID: 7422

'10 Woodsman 440 Whole Tree Chipper Item ID: 14105

3,000 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘16 Halverson H140 Skidsteer (DEMO)

Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles

Western Star Heavy Haul Item ID: 14093

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

Contact: J Williams Contact: TED Ph: (888) 401-6367 x701 Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351

‘93 Barko 180B

Item ID: 14077 Contact: Austin AM General M818 Army Truck Ph: (888) 401-6367 x703 Item ID: 14576

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

‘04 Takeuchi TLN140

M I S C E L L A N E O U S

Item ID: JW-880805

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

‘13 KMC 2500 Track Skidder

Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

Item ID: 13994NY 13606 Adams Center,

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

off onto aMorbark conveyor. This is a very 2007 Chipper Item ID: 9658 well built processor. Item ID 13820.

‘06 Cord King Model 60 Item ID: 14068

‘05 Gehl CTL 70 Contact: AUSTIN

‘83 John Deere Shop Built Wood 4850 Processor

Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item"Like ID 13644. Sam x702 New" Tajfun

Firewood Processor FIREWOOD PROCESSORS

Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703  Issue 364 385

Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701

Sam x702 model 22. Everything works like it should... Ready to go to Firewood Processor - This is work! aContact: ChomperWALKER Model 16 PDA Email: Walker@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 707 with John Deere power unit with or 931-797-3915 low hours. Control panel includes

tach, oilLumber pressure, water temp and 02’ Jackson Harvester Item ID:Cuts 1187 amp gauges. logs up to 16”.

chain conveyer, 8 way splitter,Model on 20,000lb goose neck trailer. 13916. Austin x703

Best Value Portable Log

One owner and comes 30D10, entire operation includes with knife all grinder, 30ft leg dust collector, two cilos, open top trailers, dust Item ID manuals and receipts. Purchased collector, blower unit, and Bagger. One owner machine new for $32,500. Item ID 13865.

Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter. Handles logs up to 32”. Uses

LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series

Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

❘

 List  seLL  exchange  buy  save

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘15 Cord King M44

ID:13421. 13961Sam x702 capacity!.Item Item ID

BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

Morbark 40/36

good. in good working order. 22in Item ID: 647 kohing head. head works great.

It has a CAT engine (755hp) with a sloped live

floor and top feedwheel. Brand new clutch Item IDlarge 13185. Sam x702 installed. Ready to work!!!

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 3 Strand Log Deck

Item ID: 14095 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘

 LumbermensCO.com

** CALENDAR** GMC LOG TRUCK Item ID: 5037

1995 model with new 6 liter engine with 60000 miles on it, good tires, has split 5 gear transmission. NY STATE WOODSMEN'S FIELD DAYS Contact: Fri, 18AUSTIN August - Sun, 20 August Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029

www.starwebhosting.net/woodsmen/

'99 International 4700 Chip Truck

SOUTHWEST FOREST PRODUCTS EXPO International Boom Truck Fri, 25 August - Sat, 26 August Item ID: 84573

Item ID:Tree 14116 The

Hot Springs, Arkansas Good running boom truck. Call for more www.arkloggers.com and info.

that Started Only 71,697 Miles. it All!

Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular

Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 708 or 702-875-2703

Thurs, 7 Sept - Sat, 9 Sept

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

Item ID: 44131 MID-ATLANTIC LOGGING & BIOMASS Unit has 200 original Fri, 15 Sept -hours. Sat, 16 Sept

Woods Publishing Morris WoodsTRAILER 25' LOG PUP 4 BUNKS

(888) 401-6367 ext. 701

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

MAILING ADDRESS

Blockbuster Firewood Tumbler

Cambridge, Ohio www.ohioforest.org

Item ID: 52815

** INFO LINK**

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

that go up and down, with airbags, it includes two sets of Mcdonough

Bucket Truck feet a minute also CLT presses. Item ID:has 29129

2018 Blockbuster firewood tumbler skidsteer attachment, like new! Call for more pictures!

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production

KENTUCKY WOOD EXPO Fri, 15MACK Sept -CHN613 Sat, 16 Sept

Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Phone: 888-401-6367 703 OR8931-797-8029 Fri, 6 OctEXT - Sun, Oct

EQUIPMENT REPS

Item ID: 8256 has been rebuilt, it has a 24foot in

pressure guides. Top Casting wheel

Item ID: 761 Lexington, Kentucky 2006 modelhttp://www.kfia.org/ with Mack 410Hp engine, Eaton fuller 10 speed transmission, 44k reads on camelback suspension, KentuckyWoodExpo.aspx 744,000 frame Miles. Brand new tires! Road ready!

j@lumbermens.co Contact: JOE Email: Joe@lumbermensco.com DESIGN DIRECTOR Phone: 888-401-6367 EXT 709 Donna Heninger 801-362-2170

10 hours this machine since it Sun 4 on Bolster Log Trailer

Selma, North Carolina Contact: TED Email: Teds@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 701 or (801)expo.com/ 319-9351

(888) 401-6367 ext. 704 Item ID: 8062 morris@lumbermens.co

It has all new wiring, LED lights, air pin lock, turn table MARKETING DIRECTOR super tight with a 25' long bed. Those 4 bunks are in new conditions. Rear brakes are almost ready to be reJohn Williams placed. Good trailer, work-ready!

Danckaert Band Resaw - Roughly

B & B Mfg. ............................... 18

B. H. Payne .............................. 16 Item ID: 96875 Baker ...................................... 5, 7

Stac Trac

is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts International 4300130 Item ID 13876.4300 Austin 2005 international dd466x703 less than

73000 miles, all new hoses, new bearings, $10k recently

Sinto & the W engine 125 Band with receipts Mill to prove all work, altech rebuilt the boom(23k Job) Call for more pictures!

Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

94’ Mack with Prentice 120 Sam x702 Item ID: 14215

CARRIAGES & DRIVES

Contact:2010 AUSTIN Cardinal HD Carriage Email: Austin@lumbermensco.com (Sawmill) - Cardinal Phone: Carriages 888-401-6367 EXT 703 Carriage line it includes carriage M&F Gauge ............................. 28 with onboard log turners, carriage Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Contact: TED Buck Equipment (AIM) ........ 36 Send address changes to: Email: Teds@lumbermensco.com Phone: 888-401-6367 EXT 701 or (801) 319-9351 Lumberman's Exchange

Morbark ..................................... 9

AD SUBMISSIONS

Trac - Has electric motor and 30 ft track. May be sent to Morbark – StacBell's ..................... 27 Don’t know the hoursMachining but it works really good for band morris@lumbermens.co

POSTMASTER

mills or stacking lots of squares

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ -advertorial Bandit Grinder Chipper submissions areID: used at the Item 72593 discretion of the publisher and may This a 2017 Bandit 3680 875 hpof CAT bought it new be isedited for purposes clarity 10-17 it has 1000hrs+\- Still running it some. It has the and space. Although allhad efforts have new design 30 tooth mill and also a new tail shaft and new anvil and gate. Also has a set of 3” baffled beenfor made to ensure of This is screens it that only have aboutaccuracy 30hrs on them. a content strong tier 2submitted machine owner operated they are selling by advertisers because they upgraded to a 1200hp machine, there is and writers, Lumberman's nothing wrong with the this machine and it is ready to work! IfExchange, sold they can transport anywhere in Florida or to the its principles and FL state line to reduce transportation cost for the buyer. associates, are not held You won’t find a grinder in this good liable of shapefor anywhere. errors or omissions. Reproduction, in wholeTED or part, is prohibited with Contact: Email: Teds@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 701 or ©2017 (801) 319-9351 Woods Publishing

CRD Metalworks .................... 25

Multitek ................................... 12 2009 Mack Truck & Trailers Item ID: 74618 Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper ............................ either a Rosa log rack or storm debris box. 40 Serco

CW Mill-Hogzilla ................... 15

light bar; length bed............................ to takes 244" and to back20 285" Row Electric Will separate truck and trailer. 300,000 miles, 10,000

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Corley Mfg .............................. 32

Empire Hydraulics ................... 8

Ford Great84 Lakes Mfg.L9000 .................... 34 Item ID: 62253 Hahn Machinery ...................... 3 1984 Ford L9000. 350 Big Cam Cummins. Eaton Hurst Boiler ............................. 14 Fuller 10 speed trans. Hendricks Suspension. Drive tires 60% mud terrain. Steer tires 90% Pintle with air hookups. Great truck. Pulls Ironhitch Bull ................................... 21 and stands up well. Call for more pictures.

Kilgore Saw ............................. 22

Contact: TED Email: Teds@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 701 or (801) 319-9351

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

18 speed. All new tires and brakes. Versitle with 7500 Loader. Rear tires 11R 22.5 (95%). Log rack; hours. This is ready to go.

Contact: TED Email: Teds@lumbermensco.com Select ......................... 19 Phone:Sawmill 888-401-6367 EXT 701

or (801) 319-9351

Smith Sawmill ........................... 4

48" bottom saw and 36" top saw

STACKING RAC 75” Fulghum Chipper Item ID: 41386

75” 8 knife chipper 300HP motor, everything is in good working condition, hydraulic unit built in. Call for more pictures!

Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703

The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10

Mack Log Truck

Item ID: 14087 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Universal Refiner ...................Email: 23 Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net WoodMizer ................................ l 800.S48.6914 I S73.663.7711

 SELL YOUR EQUIPMENT TODAY TODAY l§

❘

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 37

M I S C E L L A N E O U S

MID-ATLANTIC

LOGGING & BIOMASS EXPO

BANDMILLS & HEADSAWS

machine, with air strain conveyers

Inline 6 CAT 200 KW

PUBLISHER

ADVERTISING SALES

pictures

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

A D D I RPhone EC TO RY 315.284.4126

Fax................................... 828-757-3500 Air Systems Mfg,.................................... 13. 315.849.2045 Albach Northamerica............................ 2...................................... 978-939-9111 Website Anson........................................................ 4...................................... 800-663-7723 www.empirehyd.com Email B &“Precision B Mfg................................................ 9...................................... 800-654-5320 Under Pressure” info@empirehyd.com B. H. Payne.............................................. 15.................................... 404-761-8711 Baker......................................................... 6, 11............................... 800-548-6914 Bell's Machining..................................... 9...................................... 888-995-1965 Blockbuster Inc....................................... 12.................................... 888-775-4883 Buck Equipment (AIM).......................... 15.................................... 800-803-3365 Built-Rite Firewood Processing Equip...... 14.................................... 800-757-2520 Corley Mfg............................................... 10.................................... 423-698-0284 CW Mill, DynaHog................................. 7...................................... 800-743-3491 Great Lakes Mfg..................................... 14.................................... 877-248-5677 Hurst Boiler............................................. 13.................................... 877-774-8778 James G. Murphy Co............................. 39.................................... 800-426-3008 Kentucky Wood Expo........................... 10.................................... 502-695-9979 Kilgore Saw.............................................. 10.................................... 888-857-5153 Klug Korners........................................... 15.................................... 800-471-5060 Laona Machine Supply.......................... 6...................................... 715-674-3909 Lignomat.................................................. 13.................................... 800-227-2105 LM Equipment Co. Ltd.......................... 1...................................... 604-576-0088 Menominee Saw..................................... 15.................................... 800-582-0470 Metal Detectors Inc............................... 12.................................... 541-345-7454 Midwest Sharpening ............................ 14.................................... 231-924-5953 Multitek North America. LLC.............. 11.................................... 800-243-5438 Pantron Automation, Inc. .................... 38.................................... 800-211-9468 Piper’s Saw Shop.................................... 8...................................... 800-845-6075 13428 Victory Ln. // PO Box 3...................................... 124 Profile Technology................................. 800-369-4242 Prolenc Manufacturing Adams Center,Inc.................. NY 1360640.................................... 877-563-8899 Row Electric............................................ 14.................................... 800-248-4479 Ryan's Equipment................................... 6...................................... 989-427-2829 Select Sawmill Co................................... 12.................................... 866-724-7600

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

M I S C E L L A N E O U S

Firewood Processor - This is

'91 Fuel Harvester Tub Grinder ‘83 John Deere Item ID: 14112

4850

3406 Cat engine and 4424 total Item ID: 14073 machine hours.

Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703

chain conveyer, 8 way splitter, on Kenworth Road Tractor Truck Itemneck ID: 14092 20,000lb goose trailer. Item ID

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good

Contact: AUSTIN 13916. Austin x703 Email: Austin@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 703 - Small manufacturer in PA has

quality chips with patented ‘Cone’

Handles logs up to 32”. Uses

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

359 Peterbilt Truck in excellent condition. Runs great. Item ID: 7841 Item ID 13644. Sam x702

1987 model with 600,000 Miles. Has 400 Cummins engine, air ride suspension, 40 rears, and all new drive tires. Can be sold with or without a Pitts log trailer

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN - Email: It has aAustin@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30703 inch tooth circle saw, foot insert931-797-8029  Issue 364 385

made the best valued log splitter.

13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Kenworth Truck Value! PA. Item IDLog 12062. Sam x702 Item ID: 4849 Firewood Processor - This is a 1990 model with 300,000 original with miles. Has 444 Cumhomemade processor a 10’

mins engine, 15 speed transmission, 46 rears. Recently

had deck. new head,Has pistons, rings, and New grapple, steer tires inlog a hydraulic stalled. Can be sold with or without a Pitts log trailer.

chain and kicker that all runs off Contact: AUSTIN ofEmail: a 4 cylinder Mercedes power Austin@lumbermensco.com Phone: 888-401-6367 EXT kicks 703 unit. Has 931-797-8029 a 4’ chain saw that

Lumbermens™  since 1986

❘

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

,-soo-211-94&8

off onto a conveyor. This is a very Sam x702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

well built processor. Item ID 13820.

‘05 Gehl CTL 70

‘93 Barko 180B

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

1999 Bandit 1900 Tracked Disc

Chipper - Cat Under Carriage at

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks.

• Through-beam range u p to 230 feet Item ID1 13694. Sam x702 50% or better. 475 hp Cummins • Waterproof -94IP67 rated Barko 275 - Excellent value Diesel. 7500 Hours. One owner. • Not affected by vibration with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. • 60k LUX Immunity to sunlight CUMMINS continuous grapple. Sam x702 2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

❘

 LumbermensCO.com

** CALENDAR**

FOR CLASSIFIEDS

425.486.1246 - James G. Murphy Co. - MURPHYAUCTION.COM Call 888.401.MENS

PUBLIC AUCTION NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com

& HEADSAWS SOUTHWEST PRODUCTS EXPO SWANSON GROUP FOREST GLENDALE SAWMILL - BANDMILLS LIVE AUCTION

The Tree that Started it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Danckaert Band Resaw - Roughly Fri,Sawmill, 25 AugustPlaner, - Sat, 26 August Mill, Rolling Stock

Hot Springs, Arkansas

Preview 8:00 AM to 4:00 PM | Tuesday,feed August 6 deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES 2695 Glendale Valley Rd., Glendale,with OR 97442 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

10 hours on this machine since it

Date: 9:00 AM | Wednesday - has August 7 www.arkloggers.com been rebuilt, it has a 24foot in

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina www.midatlantic-logging-biomass expo.com/

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR Item ID 13876. Austin x703 Lexington, Kentucky AUCTION HIGHLIGHTS John Williams http://www.kfia.org/ S & W 125 Band Mill with 1997 STROHM MODEL (888) 401-6367 ext.L0-66, 701 60” WHOLE LOG CUT OFF SAW KentuckyWoodExpo.aspx Caterpillar generator - Low hours 2000 j@lumbermens.co USNR SERIES 7310 LOG MERCHANDISING SYSTEM W 32” TIMBER SAW LINE on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW L&M 7’ PACKAGE SAW LINE Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct LINDEN MODEL DQ436X55, 60’ DOUBLE ACTING QUAD FEEDER LINDEN 42’ SINGLEREPS ACTING QUAD FEEDER Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT NEW WEST LOG 24’, 10-STEP LOG LADDER Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. LINDEN 24’ 4-STEP ext. STEP702 FEEDER (888) 401-6367 Sam x702 LINDEN 24’ 3-STEP STEP FEEDER sam@lumbermens.co (16) 18”-48” X 18’-188’ MILL POWER CONVEYORS CARRIAGES & DRIVES Austin 36” Woods MDI TWA2000 X 44” WHOLE LOG METAL DETECTOR 2010 Cardinal HD Carriage (888) 401-6367 ext. 703 NUMEROUS LOG DECKS, HAULS, ROLLCASES, SCREW FEEDER austin@lumbermens.co Carriages (Sawmill) - Cardinal SALEM 5’ TEMPOSONIC VERTICAL TWIN BAND RESAW 1998MAILING SCHURMAN 2TA230SBE REMAN EDGER W/OPTIMIZER ADDRESS Carriage line it includes carriage SCHURMAN/USNR 4-6SA24 GANG EDGER, HP. ............................... 18 M&F Gauge ............................. 28 B & B650 Mfg P.O. Box 1916 with onboard log turners, carriage HEMCO SERIES ACCU-TRIM AIR LIFT TRIMMER W/SCANNER Columbia, TN 332 38402-1916 B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 IRVINGTON MOORE MODEL 6671LH AIR LIFT TRIMMER drive, hyd pac for carriage, (888) 401-6367 2011 SEC MODEL POS724-MIN POSI-LOCK POSITIONING FENCE Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, SUBMISSIONS 2013 AD USNR MODEL 7PLH24 MULTI-TRACK FENCE May be sent to cabinet with electronic drives for PLC 200 TONG DOG LOADER Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co LSI 20’ 7-TRAY SORTER carriage knees, husk including Force Mfg. ..................... 31 Midwest Sharpening.............. 26 IRVINGTON MOORE 20’ 45-BIN PUSH Brute LUG SORTER POSTMASTER 48" bottom saw and 36" top saw 2000 HI-TECH 24’changes 42-BIN PUSH Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 Send address to: LUG SORTER IRVINGTON MOORE 20’ CONTINUOUS OVER END STACKER Lumberman's Exchange Corley Mfg .............................. 32 Multitek ................................... 12 SIGNODE MHT-M44 POLY BANDER STATION P.O. Box 1916 YATES A95 4-HEAD 6”X13” 20-KNIFE PLANER W/2018 MILLER FEED Columbia, TN 38402 CRD Metalworks .................... 25 Piper's Saw Shop.................... 13 TABLE, BRIDGE & FEED ROLLS NEWNES 20’ CONTINUOUS BREAKDOWN HOIST The2015 Lumberman's Exchange is CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 JEFFREYmonthly 54WB HOG, PRECISION 66” & CM&E 60” & 50” CHIPPERS published by Woods CW Mill-Hogzilla ................... ACROWOOD 5’X10’ , BM&M 5’X10’ & 4’X8’ , ROTEX 5’X8’ CHIP SCREENS 15 Row Electric ............................ 20 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights NUMEROUS BLOWERS & FEEDERS Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial WESTERN PNEUMATICS 630 BAGHOUSE, (4) CHIP BINS, (3) SURGE BINS submissions are used at the (80+) SECTIONS OF MCC MAINS TO 4,000 AMPS, WIRE LOT ................... 8 Select Sawmill ......................... 19 Empire Hydraulics discretion of COMPRESSORS, the publisher and(2) may (4) QNW PNEUMATECH DRYERS be FULL editedFILING for purposes of clarityROOMS Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 & GRINDING and space. Although all efforts have (4) WELLONS 66’ KILNS, WELLONS BOILER IN ...................... GLIDE, OR) 3 The Paul Bunyan Show ......... 39 Hahn(LOCATED Machinery been made to ensure accuracy of 2006 SENNEBOGEN 825 RUBBER TIRE MATERIAL HANDLER LOG LOADER content submitted by advertisers HYSTER H230XL FORKLIFT Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and1998 writers, the Lumberman's PRIVATE TREATY EQUIPMENT (2) 2001its HYSTER H210HD Exchange, principles and FORKLIFTS Iron Bull ................................... 21 USNR UnionLENGTH Grove Saw & Knife .. 2, 37 & HALF W/SLEW, SKEW & TILT, 4-SIDED CANTER & 6’ L&B 2004 HYSTER H190HD FORKLIFT associates, are not held liable for QUAD BANDMILLS, PORTER SCANNER & RECENT CONTROL LOGIC 1998orHYSTER H190XL FORKLIFT errors omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 PROCESSOR UPGRADE (3) 1994 H190XL FORKLIFTS in whole orHYSTER part, is prohibited with TRANSVERSE HIGH GRADElSCANNER W/TRUE READ GRADE www.BakerProducts.net Lignomat ................................. 24 USNR WoodMizer ................................ out1990 written consent. HYSTER H155XL FORKLIFT 425.486.1246 MARK READER 800.S48.6914 I S73.663.7711 1995 HYSTER H80XL FORKLIFT ©2017 Woods Publishing murphyauction.com 2019 CARBOTECH 20’ LINE SHAFT TRIMMER (NEVER INSTALLED) - USED FORESTRY EQUIPMENT FOR SALE  SELL YOUR EQUIPMENT TODAY TODAY ❘ 0  24/7 SUPPORT  (888) 401-MENS NO. 39 401-MENS SALE ❘ l§ SUPPORT ❘ L!

** INFO LINK**

STACKING RAC

e ent

ore

Collar

Spring

Collar

Nut

Collar

Spring

Adjusting Bolts Link

Adjusting Bolts

Pressure Plate Wear Pin Sleeve

Bearing

Plate

Pressure Plate

Wear Sleeve Bearing

Housing

Wear Sleeve

Pressure Plate

Housing

Wear Sleeve

Housing

Spring

Bearing

Pressure Plate

Adjusting Bolts Spring

Link

Bearing

Wear HousingSpring Sleeve Housing Link Spring Bearing Adjusting Spring Bolts Bearing Adjusting Bearing Adjusting Bolts Pressure Bolts

Link

Spring Bearing

Housing

Bearing

Adjusting Bolts

Link

Bearing

Wear Sleeve

Bearing Pin

Link

Wear Sleeve

Wear Sleeve Bearing

Wear Sleeve

Collar

Core

Bearing

Core

Nut

Core Wear Spring Sleeve Pressure Core Core Adjustment Link Spring Spring Pressure Adjustment

Wear Sleeve

Nut

Pressure Adjustment

Spring

Pressure Adjustment

Core

Wear Sleeve

LUMBERMENSâ&#x201E;˘ MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402 PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN