F R E E
E Q U I P M E N T
L I S T I N G S
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot 376 Issue 364
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com
Industry's**Most Trusted Source CALENDAR**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
The Tree that Started N E Wit All!
MID-ATLANTIC
NEW
that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
feet a minute also has CLT presses.
Lexington, Kentucky
Item ID 13876. Austin x703
Cornell Edger S& W 125 Band Mill with
Caterpillar generator - Low hours on the mill, electronic computer Set
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
works,1 1/2" or 2" band, 22ft. track
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
** INFO LINK**
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
NEW
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
machine, with air strain conveyers
KentuckyWoodExpo.aspx
Donna Heninger
POSTMASTER
Hoist its a production bells Tilt and whistles,
http://www.kfia.org/ Custom NEW Specialty Conveyors
DESIGN DIRECTOR
May be sent to morris@lumbermens.co
with 44 inch wheels, and all the
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
LOGGING & BIOMASS EXPO
John Williams Scragg Morgan (888) 401-6367 ext. 701 j@lumbermens.co
AD SUBMISSIONS
feed deck 20 foot out feed deck
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
has been rebuilt, it has a 24foot in
Escanaba, Michigan
Woods Publishing
MAILING LogADDRESS Cutoff Saw
10 hours on this machine since it
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Good Used Chipper Thurs, 7 Sept - Sat, 9 Sept
PUBLISHER
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
Danckaert Band Resaw - Roughly
Hot Springs, Arkansas www.arkloggers.com
Since 1986, Lumbermens has NEW Chipper published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
ADVERTISING SALES
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
NEW Precision 6x6 M&F Gauge ............................. 28
B & B Mfg. ............................... 18
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal
Carriage Log line itTrough includes carriage Mellott
with onboard log turners, carriage
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
Cleereman 100 HP Carriage Drive
drive, hyd pac for carriage,
48" bottom saw and 36" top saw
NEW
STACKING RAC
Rotochopper............................ 40 NEW MDI Metal Detector Cambio Debarker
The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, Columbia, TN 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial submissions are used at the Empire Hydraulics ................... 8 discretion of the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery been made to ensure accuracy of Industry's Most Trusted...................... Source 3 content submitted by advertisers Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with Lignomat ................................. 24 out written consent. ©2017 Woods Publishing
Row Electric ............................ 20
800-241-8983 Sawmill Exchange .................. 11
Ken Dickert, President
Select Sawmill ......................... 19
Eric Doss 706-478-1581 Jim Lichucki 706-478-5498 Thomas Industrial Controls..... 10 Wes Dickert 706-478-5893 Union Grove Saw & Knife.. 2, 37 Smith Sawmill ........................... 4
The Paul Bunyan Show ......... 39
sales@benjones.com
Universal Refiner ................... 23
** Financing Available **
WoodMizer ................................ l Don't See What You're Looking for Here? Search Our Complete Inventory at www.benjones.com 800.S48.6914 I S73.663.7711
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
www.BakerProducts.net
❘
24/7 SUPPORT 0
❘
(888) 401-MENS L!
NO. 3
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot 376 Issue 364
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
1994 Barko 160B - Electric
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com
EST
** CALENDAR**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
TA B L E OF CONTEN T S& HEADSAWS BANDMILLS SOUTHWEST FOREST PRODUCTS EXPO SUBSCRIPTION: Lumbermens, a trade newspaper for the The Tree logging, sawmilling, pallet manufacturing, and secondary wood that Started manufacturing industry, is free within the United States to qualifying manufacturers it All! and industry suppliers. Please limit your subscription to one free copy per company or mill location.
Fri, 25 August - Sat, 26 August
Danckaert Band Resaw - Roughly
www.arkloggers.com
has been rebuilt, it has a 24foot in
D PA R T M E10 N Smachine since it hours T on this Hot E Springs, Arkansas feed deck 20 foot out feed deck
72ND ANNUAL GREAT LAKES Free Equipment Listings......................... 6 with 44 inch wheels, Book and all the Since 1986, Lumbermens has changes CHANGE OF ADDRESS: Send address to Lumbermens LOGGING & HEAVY EQUIPMENT EXPO blades and 1 spare 36" blade), Pulleys on Bearing . Parts and
Magazine, P.O. Box 1916, Columbia, When possible, published a monthly circular TN 38402. Thurs, 7 Sept - Sat, where 9 Sept to order bellsincluded. and whistles, its a production short pop-up transfer to edger, Item ID please include an old address label. reaching sawmills, loggers, Escanaba, Michigan belted rollcase to clear slabs and 12846. Sam x702 machine, with air strain conveyers pallet makers, recyclers and REPRODUCTION AND RESPONSIBILITY: Advertisers are CHIPPERS cuts from sawline, log stop and that go up and down, with airbags, industrial responsible woodworking for the contents plants and claims of their advertising. MID-ATLANTIC LOGGING Precision & BIOMASS 58 Chip Pac - Single chute worldwide. loader to drop logs onto carriage, Lumbermens accepts no responsibility for their claims. No it includes two sets of Mcdonough
Deals of the Month ............................... 18 Ad Directory........................................... 38
Fri, 15 Sept - Sat, 16loading Sept part of this publication may be reproduced or transmitt ed in log turner under system,. Item ID 12764. heavy duty log PUBLISHER pressure guides. Top Casting wheel Selma, North Carolina any form or by any means, electronic or mechanical, including Sam x702 stop and loader to deal with big Woods Publishing photocopying, recording or any information storage retrieval www.midatlantic-logging-biomass is supported on both sides. This MID-ATLANTIC Trelan Chipper - This is a remote logs onto carriage and track and system,ADVERTISING without permission of Lumbermens. Negati ves, artwork, SALES expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine chipper that has been totally rebuilt Significant new spare parts and other items submitt ed for publicationframe. in Lumbermens are Morris Woods in ve1y good condition, the property of advertisers. Lumbermens owns material typeset (888) 401-6367 ext. 704 with about 840 hours exceptCuts for 130 the to be negotiated separately . Item ID KENTUCKY WOOD EXPO and/or designed by Lumbermens and reserves the right to its morris@lumbermens.co of feet a minute also has CLT presses. 13198. Sam x702 Fri, 15 Sept - Sat, 16V-12 Sept Caterpillar power unit. New use outside of Lumbermens. Lumbermens will exercise every the MARKETING clutches, disc, bearing, liners and Manual Four Head Block -Lexington, ManualKentucky Item ID 13876. Austin x703 precauti on in writing, DIRECTOR designing, and printing material contained Williams within. WeJohn shall not be liable for omissions or typographical http://www.kfia.org/ custom chute. 23” in opening Four Head Block Mounted on S & W 125 Band Mill with and errors.(888) 401-6367 ext. 701 KentuckyWoodExpo.aspx V-12 Cat with 750-800 hp rating. all steel carriage. Husk. Manual
LIST
1986
SELL
EXCHANGE
BUY
SAVE
lS Month om ApriL
j@lumbermens.co oodmIzer LT 40
Caterpillar generator - Low hours
EquipmEnt REpREsEntativEs EST 1986 Cambridge, Ohio EQUIPMENT REPRESENTATIVES cAll uS todAy foR All youR uSed www.ohioforest.org
Donna Heninger
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
**
needS! CALL US equiPMent TODAY FOR ALL YOUR USED EQUIPMENT SamNEEDS! x702
CARRIAGES & DRIVES
FREE EQUIPMENTlistings! LISTINGS!2010 CALL –HD Carriage fREE EquipmEnt Call – Cardinal INFO(888) LINK** (Sawmill) - Cardinal (888) 401-6367Carriages 401-6367 Carriage line it includes carriage
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
The Tree MAILING ADDRESS
on the mill, electronic computer Set
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
DESIGN DIRECTOR
LIST
SELL
EXCHANGE
BUY
SAVE
Joe Ferrazzano Walker Woods Sam Wall with onboard log turners, carriage that Started AD Sales (888) 401-6367 (888) 401-6367 (888) 401-6367 Y .............................. SAVE B.BH.UPayne 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 it All! Ext. 709 Ext. 707 702 Saw ..................... 29 Baker ...................................... 5,Ext. 7 Menominee sawyers cab, computer controls, 704 EST 1986Ext.
P.O. Box 1916 Columbia, TN 38402-1916 ST S E L L(888) 401-6367 EXCHANGE d: 14061 ct: Austin x703 AD SUBMISSIONS Since 1986, Lumbermens has May sent to pub lished abemonth ly circular JoHn deere morris@lumbermens.co reaching sawmills, loggers, pallet 548G3 makers, recyclers and industrial POSTMASTER wood work ing plants worldwide. Send address changes to: Lumberman's Exchange P.O. Box 1916 PUBLISHER Columbia, TN 38402 Woods Publishing
The Lumberman's Exchange is DESIGN DIRECTOR published monthly by Woods TedBox Monnin Publishing, P.O. 1916, Columbia, TN 38402. All rights ced PRice ADDRESS reserved.MAILING All editorial/ advertorial d: 14021 P.O. Box 1916 submissions are used at the ct: Sam x702 Columbia, 38402-1916 discretion of the TN publisher and may (888) 401-6367 be edited for purposes of clarity and space. Although all efforts have ADtoSUBMISSIONS been made ensure accuracy of May be sent to— content submitted by advertisers andmorris@lumbermensco.com writers, the Lumberman's Exchange, its principles and POSTMASTER associates, are not held liable for Send address Reproduction, changes to: errors or omissions. in whole or part, is prohibited with Lumbermens Magazine out written consent. P.O. Box 1916 d: 14061 Columbia, TN 38402 ©2017 Woods Publishing ct: J Williams x701
AbTeK 344b
B & B Mfg . ............................... 18 Morris Woods
sam@lumbermensco.com
joe@lumbermensco.com
Bell's Machining ..................... 27 morris@lumbermensco.com
Metal Detector's Inc. .............. 30
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
walker@lumbermensco.com cabinet with electronic drives for
carriage knees, husk including 48" bottom saw and 36" top saw
STACKING RAC
40 Woods, Ad Sales CW Mill-ArmorHog .............. 17 Rotochopper............................ chris Woods Morris Phone: (888) 401-6367 Phone: (888) 401-6367 CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 ext. 700 ext. 704 Liz Young Austin Woods Chris Woods Mark Laxton chris@lumbermens.co morris@lumbermens.co Dyna401-6367 Products ........................ 35 Sawmill Exchange .................. (888)11401-6367 (888) 401-6367 (888) (888) 401-6367
Ext.19 701 Ext. Ext. 700 Empire Hydraulics ................... 8 703 Select Sawmill .........................
chris@lumbermensco.com
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
❘
SELL YOUR EQUIPMENT TODAY l§
Austin Woods Phone: (888) 401-6367
Ext. 708
liz@lumbermensco.com
austin@lumbermensco.com
Great Lakes Mfg. .................... 34
- USED FORESTRY EQUIPMENT FOR SALE
r classifieds
M&F Gauge ............................. 28
❘
24/7 SUPPORT 0
mark@lumbermensco.com
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 5
Sam Wall Phone: (888) 401-6367
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO)
‘93 Barko 180B Item ID: 14077
Austin FREE EQUIPMENT LISTINGS, CALL (888) Contact: 401-MENS Ph: (888) 401-6367 x703 Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
FOR SALE
120 Acres contains at Least 50 % Redwood, 10 To 15 % Doug Fir, the remaining is Tan Oak and Madrone, with a very Good Running Spring. In Mendocino County, in Northern California $ 650,000 Call PETE at 707-815-3640 BANDMILLS & HEADSAWS
DANCKAERT BAND RESAW Roughly 10 hours on this machine since it has been rebuilt, it has a 24 foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells 13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurateTrack machine ‘13 KMC 2500 in very good condition, Cuts Skidder 130 feet a minute also has CLT Item ID: 14078 presses. Contact: Austin Austin x703 Item ID 13876. Ph: CARRIAGES (888) 401-6367 x703 & DRIVES 2010 CARDINAL HD CARRIAGE CARRIAGES off onto a Carriage conveyor.line Thisitisincludes a very Cardinal well built processor. Item ID carriage with onboard13820. log turners, Sam x702 carriage drive, hyd pac for Processor carriage, -sawyers Firewood This is cab, computer controls, cabinet with a Chomper Model 16 PDA electronic drives for carriage automatice firewood processor 48” knees, husk including with John Deere power bottom saw and 36”unit topwith saw, short pop-up transfer edger, low hours. Control panel to includes belted rollcase water to clear tach, oil pressure, temp slabs and and cuts from sawline, log stop amp gauges. Cuts logs up to 16”. and loader to drop logs onto One ownerheavy and comes carriage, dutywith log all turner manuals and receipts. Purchased under log stop and loader to deal for with big logs carriage new $32,500. Itemonto ID 13865. and track and frame. Sam x702 Schutte Item ID Hammermill 13198. Sam x702
Value! PA. Item ID 12062. Sam x702
TRIPLE DRUM DRYER Item ID:PASS 13920 12 x 42 Mec triple Contact: Austin pass Drum Dryer, comes with trunnions. Ph: (888) 401-6367 x703 Item ID 13924. Austin x703 DYNAMIC CHIPPERS
2004 JCB 441 WHEEL LOADER 3,509 hours on this machine, BARKOas it should. everything works 1994 Barko 160B - Electric available I have many videos of it running,30'and can75hp be sent knuckleboom, boom, upon request. motor, Rotobec continuous Item ID 13888. Austin x703 capacity!. Item ID 13421. Sam x702
grapple, 5,000 original hours.
(excellent condition.). Item ID 2008 DYNAMIC 585 CHIPPER
13238. x700 dynamic cone This isChris a 2008 headBarko chipper 1700 hours, 1995 775 Bwith Feller Buncher
very recently good conditi -inPumps redone.on. 400 Easily hrs produces high quality chips with patented ‘Cone’ drum design. good. in goodload working order. 22in Can 42’ and ‘01 easily Benson 34’vans End kohing head. head works produce 6 - 8 loads pergreat. day. Dump Item 13882. Item ID ID 13185. Sam Austi x702 n x703 on injection pump. always started
FIREWOOD 1999 Barko 160DPROCESSORS - new engine with Item ID: 13818
2010 SHOP BUILTHour Contact: Sam approximately 1500 hours.
94 Barko 275 - Excellent value
COMPLETE 50% or better. 475 SAWMILLS hp Cummins
This maintained. mill is currently running, Well Item ID 13294.
and includes the sawmill, and cab. An incline conveyers, a in excellent condition. Runs great. Firewood Processor - This is a 2004 Bandit Beast Model 4680 transfer table and two sets of Item ID 13644. Sam x702 3412 Dieselmill engine homemade processor with a 10’ rollerCaterpillar tables. This saws a FIREWOOD PROCESSORS with 850 board HP. 5300feet hrs. or Millmore in log deck. Has a hydraulic grapple, million of walnut every year. Max log 2010 Shop Built Wood Processor chain and kicker that all runs off good condition. Just finished 10 2013 Caterpillar diameter 36in, Max Width of - It has a 353 Detroit diesel, 40 Acre clearing job, ready to work! of a 4 cylinder Mercedes power cut 25in, The of the band 535Ccontrol.width inch insert tooth circle saw, 30 foot Remote Big production unit. Has a 4’ chain saw that kicks is 1 1/2 Inches. Video of it Item ID: 13868 Contact: Sam 376 Lumbermens since 1986 ❘ Issue 364 List seLL exchange buy save Ph: (888) 401-6367 x702 Brewco Saws - Two Brewco Saws
‘95 John Deere C6 MEC 12 X 42 Tree Farmer
Diesel. Hours. One owner. 20067500 WOODMIZER LT300
but electronic option is available.
adjustable to single two way. Great
MEC 12 X 38 TRIPLE PASS DRUM DRYER Comes with trunnions, drum drive, fan and cyclone. Item ID 13925. Austin x703
PRECISION 58 CHIP PAC Single chute loading system. Ph:Item (888) 401-6367 x703 Chipper -ID Cat Under Sam Carriage at 12764. x702
LOGGING EQUIPMENT BANDIT Item ID: 13965
GrinderCHIPPERS
1999 BanditAustin 1900 Tracked Disc Contact:
Has Log Lift. Uses 4-way wedge
DRY KILNS
WOOD PROCESSOR It has a 353 Detroit diesel, 40 inch have only used it to load trucks or insert tooth circle saw, 30 foot as a backup as needed. a er, CTRon chain conveyer, 8 wayHas splitt delimber, grapple hastrailer. been rebuilt. 20,000lb goose neck Itemcylinders ID 13916. Austi n x703 Boom have minor leaks.
Handles logs up to 32”. Uses
13HP Honda motor. Manual start
operating is available, and can be sent upon request. Item ID 13892. Austin x703
Sam x702
(888) dont 401-6367 Ext.last 603 meter work. The 2 owners
Item ID 13694. Sam x702
FIREWOOD PROCESSOR This is a homemade processor with hours 3,500. 5.9 withlow a at 10’ logat deck. Has a Mag 64-knive CUMMINS continuous grapple.and hydraulic grapple, chain kicker that Item all runs off Sam of a 4 Runs Great!. ID 13740. Source Grinder cylinder Mercedes power unit. Item ID: 14007 x702 Has a 4’ chain saw that kicks off Contact: Austin BELL This is a very onto a conveyor. Ph: (888) 401-6367 x703 1990 T - This Bell has well Bell builtSuper processor. a brand Duetz engine. Lever Itemnew ID 13820. Sam x702
swing motor. Haspump new jet fittranny control, 33” bar, and
system. This machine is loaded... LumbermensCO.com has❘ pro-heat system for cold weather start. Has fire suppression
FIREWOOD PROCESSOR This is a Chomper Model 16 PDA automatice firewood processor with John Deere power unit with low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts. Purchased new for $32,500. The Tree Item ID 13865. Sam x702 that Started LOGGING EQUIPMENT
it All!
BANDIT
Since 1986,BANDIT Lumbermens has 2004 BEAST published a monthly circular MODEL 4680 reaching sawmills, loggers, 3412 Caterpillar Diesel engine with pallet makers, recyclers and 850 HP. 5300 hrs. Mill plants in good industrial woodworking conditi on. Just finished 10 Acre worldwide.
clearing job, ready to work! Remote PUBLISHER control. Big production capacity! Woods Publishing Item ID 13421. Sam x702 ADVERTISING BARKO SALES Morris Woods
1994401-6367 BARKO ext. 160B (888) 704 Electric knuckleboom, morris@lumbermens.co 30’ boom, 75hp motor, Rotobec MARKETING DIRECTOR continuous grapple, 5,000 origiJohn Williams ‘04hours. Takeuchi TLN140 nal (excellent conditi (888) 401-6367 ext. 701on). Item IDJW-880805 13238. Chris x700 j@lumbermens.co Item ID: BELL Contact: J Williams DESIGN DIRECTOR Ph: (888) 401-6367 x701 Donna 1990 BELLHeninger SUPER T This BellEQUIPMENT has a brandREPS new Duetz engine. Lever Sam control, 33” bar, pump Wall and tranny been rebuilt not long (888)has 401-6367 ext. 702 sam@lumbermens.co ago. Hour meter is inop. New paint. Runs perfect. HasWoods heat and air, it Austin just needs be fixed. ext. 703 (888)to 401-6367 austin@lumbermens.co Item ID 13896. Sam x702
MAILING ADDRESS 1993P.O. BELL BoxSUPER 1916 T Good runningTNconditi on. 33” Columbia, 38402-1916 Bar Saw. (888) Tires401-6367 at 50%. Deutz engine. AD Hour meter broken. SUBMISSIONS Item ID 13543. Sam May be sent tox702 morris@lumbermens.co
BELL TREE CUTTER POSTMASTER Around 1000 changes ‘01Send JD address 640Ghours III onto:the machine. New air cooled motor Lumberman's Exchange Itemabout ID: P.O. 14019 Boxhours. 1916 Rebuilt only 300 Contact: AustinTN Columbia, 38402 bars dangling head. Several Ph: (888) 401-6367 x703 and chains. Machine came off The Lumberman's Exchange is the job in February and published monthly by Woodsis field Publishing, P.O. Box 1916, ready. with only hours. Itsrights been used Columbia, TN 38402. All Item ID9500 13943. Austi n x703 reserved. All editorial/ advertorial submissions are used at the chipper. Item ID 13804. discretion of the publisher andx702 may 2006 CASE 440 SKIDSam LOADER be edited purposes of clarity With only for 871 hours, 2012 Caterpillar 559B - this Onlymachine 4000 and space. Although all efforts have starts, runs, and operates likeofnew. hours this like new loader. It I been on made to ensure accuracy have many videos by available and can content submitted advertisers has only worked in pine until writers, Lumberman's beand sent uponthe request. recently. Item ID 13695. Sam x702 Exchange, its principles and Item ID 13886. Austi n x703 associates, are not held liable for 2013 Cat 525 C Grapple Skidder errors or omissions. Reproduction, CASEClean 850G LONG TRACK DOZER -99’ Super Cat with only in whole or part, is525 prohibited with out written consent. One owner machine, only 3300 2700 hours and a 5000 hour Power ©2017 Woods Publishing
its whole life dragging CASE wood for a
** CALENDAR**
original hours, has never been 1994 CATERPILLAR D4 HI used in the woods, it has a ripper on TRACK WITH GRAPPLE the back, original pads, and chains, This is an extremely low Under carriage is new along with hour dozer/skidder with only NY new STATE2800 WOODSMEN'S FIELD DAYS new rollers on the bottom, and actual hours. Comes Fri, 18 with August 20 August sprockets. new- Sun, 30” pads and chain. Boonville, NewisYork Item ID 13909. Austin x703 Undercarriage still in excellent CATERPILLAR www.starwebhosting.net/woodsmen/ shape. Fixed grapple and no winch. 1994 CATERPILLAR SOUTHWEST 320 FOREST PRODUCTS EXPO Item ID 13932. Sam x702 Dry machine that is in good Fri, 25 August - Sat, 26 August condition for the year. The stick and Hot Springs, Arkansas 1996 CAT 214 MOBILE bucket cylinder have been repacked. www.arkloggers.com EXCAVATOR It has a thumb and bucket on it, with 36’ tons steel also has a 230 Waratah processing 72ND ANNUALmagnet GREAT 3LAKES shear. low hrs! All hard tires, head that can be sold LOGGING with it. & HEAVY EQUIPMENT EXPO 4 outriggers ideal for scrap Hours are around 19k, motor has Thurs, 7 Sept - Sat, 9 Sept business. ItMichigan also has 48’ swavel been replaced a couple years back. Escanaba, bucket for street ditch clean up. Machine is working daily. Item ID 13441. x702 Item ID 13936. Austin x703 MID-ATLANTIC LOGGING &Sam BIOMASS
Fri, 15 Sept - Sat, 16 Sept
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
PIPER’S Saw Shop
MID-ATLANTIC
LOGGING & BIOMASS EXPO
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
2005 CATERPILLAR 525B BANDMILLS & HEADSAWS This is a dual arch skidder with Danckaert Band Resaw - Roughly winch. Very low hour skidder 10 hours on this machine since it with 7900 frame hours and has been rebuilt,on it has a 24foot in only 63 hours a new engine. Conti nuous grapple, res are feed deck 20 foot out feedtideck 30.5’s This really with 44 @ inch70%. wheels, andisalla the nice skidder for the price. bells and whistles, its a production Item ID 13816. Sam x702 machine, with air strain conveyers
that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours
5 7 0 6 • 5 4 8 • 800 THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
** INFO LINK**
Promotional Pricing Offer
Simonds Red Streak Hard Back 1-1/4” x .042 x 3/4” or 7/8” L im it e28d Length 13’2” B & B Mfg. ............................... 18 M&F Gauge .............................
T im O n ly 29 Menominee Saw .....................
Meadows Mill, Inc. ................e33
$14.71 $14.27 each
B. H. Payne .............................. 16
Baker ...................................... 5, 7
Tell us you saw it here! Metal Detector's Inc. .............. 30
Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
Train warranty. 30.5 tires are new USED FORESTRY EQUIPMENT FOR arch SALEwith ❘ winch. SELL TODAY ❘ -0 -back l§ in and 60% in front. Save LowYOUR hoursEQUIPMENT on Cat D5B Dozer Cat24/7 D5BSUPPORT s/n $50,000 off new machine and still
1998 CATERPILLAR 515 FORwith CLASSIFIEDS Grapple winch, no heat or air. Open cab skidder with 9800 Call 888.401.MENS hours. Tires are 28L’s, rear 90% Seefronts pictures, prices, and are 30% withand new Location all equipment at bear paws of chains. Item ID 13801. Sam x702 www.LumberMB\ISmagazine.com
this skidder at only 3700. These
22X380, direct drive, EROPS,
on the mill, electronic computer Set
works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.
Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage, sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ come (888) L! hook 401-MENS up to it and go toNO. your7 job site and put it to work to up
2007 CATERPILLAR D6N LGP Phone JEM DOZER ENCLOSED CAB315.284.4126 EXPORT LOG DEBARKING LINE Overall: Cab Heat & AC, 150HP FaxReconditioned 35 Nicholson 315.849.2045 Cat C6.6L, 90% Undercarriage,Website A-5 debarker, cab, infeed hour GPS Ready, Sweeps & www.empirehyd.com Rear glass rolls, log dischage belt with Email Screen, 13’6” PAT Blade, 39,500 “Precision Under Pressure” info@empirehyd.com side log kickers. Call 208-451LBS, Hours: 7,867 Horsepower: 0365 for details. $279,000 150 S/N: ALY03028. JOHN DEERE Item ID 13567. Chris x700 ‘92 JOHN DEERE 590 D CUTTER 2000 CAT 515 GRAPPLE SKIDDER Will need pads in the future, One Owner Runs great! Is it an sprockets and rails are about excellent condition. Rubber is 85%, it has a 4cyl JD motor. It around 75% Has new Hydraulic has a Rotnee dangle hd. w/ a bar saw and a spare idler. pump and Charge pump. Item ID 13612. Chris x700 Item ID 13616. Sam x702 CLARK
CLARK RANGER 665D Tight and dry machine, rebuilt motor. hour meter broken, It has a 353 Detroit, with grapple, and winch, always fires right up, and runs with no issues. Item ID 13748. Austin x703
1995 JOHN DEERE C6 TREE FARMER Only 20 hours on a new 5.9 Cummins engine. The whole center has been fixed, and line bolt redone, transmission is tight, center pins are good. It has a full speed tranny, with two reverse, with a winch. Working daily. Item ID 13920. Austin x703
EARLY 70’S CLARK 664 CABLE SKIDDER 2004 648GIII JOHN DEERE some center slack, needs front 13428 Victory Ln. // PO Box 124 DUEL ARCH SKIDDER tires, comes with a spare tire. Slick Machine. Runs good motor Adams Center, NY 13606 Gearmatic 19 winch doesn’t hold is in top notch condition. good. 453 Detroit power unit. Item ID 13610. Sam x702 Item ID 13629. Sam x702
When You Buy Your Circular Saws From B.H. Payne You’ve Bought the best... We Guarantee It!
Gehl CTL 70 Traditional‘05 Quality Combined With
Item ID: JW-986495 Todays Technology Contact: J Williams Ph: (888) 401-6367 x701
‘83 John Call 800 752-0627 Circular SawsDeere Make Sure To Ask For Our Free, Complete Saw Catalog Saw Bits and Shanks 4850 Circular Knives We Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Quality Brand Reg. U.S. Pat Off
chain conveyer, 8 way splitter, on Carbide Saws Item ID:Tipped 14073 Cutoff Saws & Carbide Saws. We also Carbide Strobe ® Saws Saws, Inserted Tooth20,000lb goose neck trailer. Item ID Contact: B.H. Payne &Austin Company Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, 13916. Austin x703 Ph: Saw (888) 401-6367 x703 Manufacturers Knife Grinding Wheels, Saw Gumming Wheels & Knives. Best Value Portable Log Splitter
Here’s What You Get With Every B.H. Payne Saw - Small manufacturer in PA has • Saws manufactured from only the Highest Quality Nickel Alloy Steel. condition. Easily produces high made the best valued log splitter. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. quality chips with patented ‘Cone’ Handles logs up to 32”. Uses • We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory. drum design. Can easily load 42’ Guaranteed. 13HP Honda motor. Manual start • Your Satisfaction - Completely with 1700 hours, in very good
vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
B.H. Payne & Company, Inc.
EDGERS P.O. Box 90608& GANGS Brewco Saws - Two Brewco Saws East Point, GA 30364 in excellent condition. Runs great. 404 761-8711 Item ID 404 13644. Sam x702 Fax 761-5398 FIREWOOD PROCESSORS
2010 Shop Built “Since 1890”Wood Processor - It has a 353 Detroit diesel, 40
inch insertinfo@paynesaws.com tooth circle saw, 30 foot E-mail: 376 Issue 364
but electronic option is available. Has Log Lift. Uses 4-way wedge
2004 JOHN DEERE 648GIII This machine has 13000 total hours on the body, with only 3000 hours on the new motor, comes with a set of chains, working daily. Item ID 13878. Austin x703 2006 JOHN DEERE 700J ‘16 Halverson DOZER H140 Skidsteer (DEMO) This work horse comes with a winch, and new undercarriage, Item ID: JW-909632 itContact: is tight Jand dry & running Williams daily with 4500 hours. Ph: (888) 401-6367 x701 Item ID 13883. Austin x703 2006 JOHN DEERE 748GIII 8700 hours, running daily. Item ID 13881. Austin x703 2006 JOHN DEERE FIREWOOD PROCESSOR This is a Chomper super 14, with a 60hp engine. In very nice shape. Only 171 hours, comes ‘13 KMC 2500 Track with green chain conveyer. All Skidder of the manuals for the engine, and Itemthe ID: chopper 14078 itself come with it, as well as all of the Contact: Austin electrical schemati Ph: (888) 401-6367cs.x703 Item ID 13894. Austin x703 off onto a conveyor. This is a very
well built processor. Item ID 13820. Sam x702
Firewood Processor - This is a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and
‘11 Doosan DL200
amp gauges. Cuts logs up to 16”.
Item ID: JW-113876 One owner and comes with all Contact: J Williams manuals and receipts. Purchased Ph: (888) 401-6367 x701 new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
1999 Bandit 1900 Tracked Disc
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner.
Firewood Processor - This is a
‘05 Transport Trailers Custom Sam x702 2004 Bandit Beast Model 4680 Log Pup
log deck. Has a hydraulic grapple,
with 850 HP. J5300 hrs. Mill in Contact: Williams
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 homemade processor with a 10’
chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. 4’ chain saw that kicks WebHas Site:a www.paynesaws.com
Lumbermens since 1986
❘
Well maintained. Item ID 13294.
3412 Caterpillar Diesel engine
Item ID: JW-538174
2012 JOHN DEERE 548GIII Single arch with winch, blade extensions, 1 new 28L and 3 @ 50%. This is still a new machine with only 3600 hours. Item ID 13780. Sam x702 2009 JOHN DEERE 648H ‘93 Barko 180B This is a one owner machine, Item switch ID: 14077 every works, interior is Contact: very clean,Austin radio, heat/ac. Air Ph: (888) x703Tires ride works401-6367 as it should. are 30.5x32. Extremely clean machine with no leaks. Cutting edge on blade is excellent, with no cracks or welds anywhere. Item ID 13747. Austin x703 FRANKLIN
1995 FRANKLIN 170 Enclosed cab, single arch with a winch, paint, Deere 4 brand newC6 23.126 ‘95 new John firestone tires, around 15000 hours. Tree Item ID Farmer 13910. Austin x703 Item ID: 13920 Contact: Austin 2003 FRANKLIN Q80 SKIDDER Ph: GRAPPLE (888) 401-6367 x703 7500 hours, but just 5000 hours on reman engine. New Radiator; New Hydraulic Pump; Comfort cab capacity!. Item ID 13421. Sam x702 with good working heat and air; BARKO Tires at 80%. 1994 Barko 160B - Electric Item ID 12450. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
14’ Snow Pusher
on injection pump. always started
good. good working order. 22in IteminID: JW-492406
Contact: Williams kohing head.J head works great. Ph:ID (888) 401-6367 Item 13185. Sam x702x701
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
‘04 Fabtek 344B
94 Barko 275 - Excellent value
Item ID: JW-093430
with low at hours at 3,500. 5.9 Contact: J Williams
CUMMINS continuous x701 grapple. Ph: (888) 401-6367
Runs Great!. Item ID 13740. Sam x702 Processor - This is a Chomper
BELL
Remote control. Big production Waratah 624 Super - New
super 14, with a 60hp engine. In 1990 Bell Super T - This Bell has very nice shape. Only 171 hours, a brand new Duetz engine. Lever comes with green chain conveyer. control, 33” bar, pump and tranny All of the manuals for the engine,
and auxiliary pump. New rebuilt
schematics. Item ID 13894. Austin
good Just finished Ph: condition. (888) 401-6367 x70110
Acre clearing job, ready to work!
Computer for head (Logrite). List seLL exchange buy save 10500 hours. New main pump
and❘ the chopper itself come with LumbermensCO.com it, as well as all of the electrical
19 44
Item Con Ph:
** CALENDAR**
Engine rebuilt 1500 hours ago; 2012 KOMATSU D61EX 15 DOZER hours. Fixed cab riser. Two FOR CLASSIFIEDS 8750 hours; Quadco 22” Large with only 750 Hours. Triple secti on boom with 38’ reach. SUDDRETH HORIZONTAL tree saw head. Heat and A/C Rippers; Limb Sweeps; Cab protecti on. 4-Wheel drive Call 888.401.MENS GRINDER Enclosed cab with Heat/AC; work. New bearings in saw. and steer. Can pull loaded This is a 60 HP low rpm See pictures, prices, and NY STATE6WOODSMEN'S FIELD DAYSat trailer. way blade; Undercarriage Cutti ng trees today. Cleaned, serviced and Horizontal grinder, comes Fri, 18 90%; August - Sun, Conditi 20 August Location ofTight all equipment at Excellent on! Item ID 13353. Sam x702 inspected. and dry and with a blower, and the blower Boonville, New York KMC Item ID 13459. Sam x702 ready for work. Located in www.LumberMB\ISmagazine.com connects to the grinder with www.starwebhosting.net/woodsmen/ Balti more, MD. a pipe. It has top and bottom KMC TRACK SKIDDER 2500P 2014 KOMATSU 450 Item ID 13477. Sam x702 BANDMILLS & HEADSAWS infeed rolls. Overall lightly used, John Deere Dual Arch Grapple, SOUTHWEST FOREST PRODUCTS EXPO Only 1100 hours on this in really good shape. Width John Deere winch, Model Danckaert Band Resaw - Roughly Fri, 25 machine, August -inSat, 26 August excellent condition. 2011 LIEBHERR A924 Tree capacity isThe around 30” maybe 4000, Cummins Engine, Model Hot 10 hours on this machine since it Springs, Arkansas Item ID 13937. Austi n x703 RUBBER TIRED LOG 6BTA, Clark Transmission www.arkloggers.com that Started even wider. has been rebuilt, it has a 24foot in LIEBHERR HANDLER 28000. Item ID 13889. Austin x703 it All! Liebherr 4 cylinder engine feed deck 20 foot out feed deckwith Item ID 13738. Austin x703 2007 LIEBHERR A924C 72ND ANNUAL GREAT LAKES HYDRO-AX great fuel economy. with 44 inch wheels, and all11,230 the KOMATSU LOG HANDLER RUBBER Since HYDRO 1986, Lumbermens LOGGING & HEAVY EQUIPMENT EXPO 1998 AX 611EX has SAW hours. Fixed cab riser. Two published a monthly circular TIRED LOG LOADER Thurs, 7 Sept Sat, 9 Sept bells and whistles, its a production 2007 KOMATSU PC220LC HEAD FELLER BUNCHER secti on boom with 38’ reach. reaching sawmills, loggers, 13,000 hours. Michigan40’ Reach machine, with air strain conveyers with about recyclers 8800 and hours. w/2009 Log Max 7000XT Escanaba, pallet makers, with two section boom. 60” Cab protection. 4-Wheel drive Bunching Head has large processing head. 9700 hours that go up and down, with airbags, industrial Saw woodworking plants with continuous and steer. Push blade. Can pull MID-ATLANTIC LOGGING & BIOMASS Log Log Grapple pocket for accumulation and on carrier. 7200 hours on worldwide. loaded trailer. Cleaned, serviced includes two sets of Mcdonough on. -Fixed Cab Riser with it 15 Sept Sat, 16 Sept lifting sidePUBLISHER shield for notching Max. Excavator style. CabFri, rotati and inspected. Tight and dry cab guard protecti on. Front push pressure guides. Top Casting wheel North Carolina larger Woods trees Publishing before felling. guard. Flotation pads. One Selma, and ready for work. Located blade. Tight and dry. Cleaned, is supported on both sides. This in www.midatlantic-logging-biomass Very good condition. Cummins engine. 28L tires at owner. MID-ATLANTIC Baltimore, MD. ADVERTISING SALES Serviced, and Checked out for is expo.com/ LOGGING & BIOMASS Item ID 13464.EXPO Sam x702 an extremely accurate machine 60%. Decent running condition. Item ID 13478. Sam x702 Morris Woods service. Can pull loaded trailer. Item ID 13245. Sam x702 in ve1y goodLINK-BELT condition, Cuts 130 (888) 401-6367 ext. 704 4-Wheel WOOD drive EXPO and steering. 2008 KOMATSU D61-EX KENTUCKY morris@lumbermens.co feet a minute also has3400 CLT presses. Fri, Top 15 Sept - Sat, 16 Sept Quality machine. Would be 1997 LINKBELT HAS DOZER 2002 HYDRO AX 621E LUMBERMEN’S Equipment Digest MARKETING DIRECTOR Item ID 13876. Austin x703 Lexington, Kentucky great for log yard or mill work. REBUILT PIERCE STROKE Arouund 12,000 hours on this Great Condition. 4511 Hours. PO Box 1146 John Williams http://www.kfia.org/ Item ID 13476. Sam x702Columbia, DELIMBER S& W 38402-1146 125 Band Mill with Komatsu U/C at 95%. 35% TN machine. Working daily. (888) 401-6367 ext. 701Equipment KentuckyWoodExpo.aspx 36” Pads on 60% undercarriage. Pads. 6 Way Blade. Fully 1-800-477-7606 Fax (931) 388-3564 Caterpillar generator - Low hours Item ID 13884. Austi n x703 j@lumbermens.co Digest 5221 hours. Good running 2011 LIEBHERR A904 www.lumbermenonline.com Enclosed comfort cab. Great on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW condition. Owner just spent RUBBER TIRED LOG HANDLER price! 1998 Donna 711EXHeninger SAW HEAD works,1 or 2" band, delimber. 22ft. track Fri, 6 Oct Sun, 8 Oct $30,0001/2" on upgrading Liebherr 4 cylinder engine with Item ID 13570. Sam x702 FELLER BUNCHER 3406 ID 140KW Genset, Cambridge, Ohio 12992. Sam12,400 x702 great fuel economy. 11,230 CatItem REPS 30.5-32EQUIPMENT tires at 40%; Cummins Sam Wall www.ohioforest.org hours ready to run. Item ID 13434. GRINDMASTER
LUMBERMEN’S
(888) 401-6367 ext. 702 sam@lumbermens.co
Sam x702
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
2010 Cardinal HD Carriage
PROTECT ALL ** Them INFO LINK** ® With Pro-Tec-To Wrap
MAILING ADDRESS
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
CARRIAGES & DRIVES
Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,
Hydraulic Lines – Fuel Hoses – Air Lines Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 Electric Wire Bundles – Control Cables Brute Force Mfg. ..................... 31 Midwest Sharpening.............. 26
AD SUBMISSIONS
sawyers cab, computer controls,
May be sent to morris@lumbermens.co
POSTMASTER
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
Morbark ..................................... 9
Mfg&.............................. 32® SLEEVE Multitek ................................... 12 PRO-TEC-TO®Corley WRAP PRO-TEC-TO Piper's Saw Shop.................... 13 CRD Metalworks .................... 25 COSTS! CUT YOUR DOWNTIME AND YOUR
STACKING RAC
The Lumberman's Exchange is Against CW ............................ 40 Mill-ArmorHog .............. 17 Rotochopper Protection Pinching, Crushing, Rubbing & Abrasion published monthly by Woods EVEN are Impervious to Oils CW Mill-Hogzilla ................... 15 and RowSolvents. Electric ............................ 20 Publishing, P.O.–Box 1916, UV RAYS! Both Columbia, TN 38402. All rights Dyna Products ........................ 35 Sawmill Exchange .................. 11 reserved. All editorial/ advertorial Provides Maximum Protection for Logging, For The Distributor submissions are used at the Empire Hydraulics ................... 8 Select Sawmill ......................... 19 Construction & Stationary Applications Like: discretion of the publisher and may Nearest You, Call be edited for purposes of clarity Great Lakes Mfg. .................... 34 Smith Sawmill ........................... 4 • Debarker Buggies • Pantograph Arms • Forklift Masts and space. Although all efforts have • Wheel Loaders • Skidder • Knuckleboom Hahn MachineryLoaders ...................... 3 The Paul BunyanorShow been made to ensure accuracy of Grapples Visit......... 39 Fellerbuncher Heads • Harvesting Heads • Stroke content •submitted by advertisers www.pro-tec-toproducts.com Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Delimbers • Dozer Blades Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 ® Anywhere Hoses associates, are not held liable & forWires Are – Pro-Tec-To Products OEM’s, Repair Facilities & errors orOffers omissions. Reproduction, Maximum Protection, Lower Reduced KilgoreCosts, Saw ............................. 22 Distributor UniversalInquires Refiner ................... 23 Welcome in wholeDowntime or part, is prohibited with and Less Spills! Lignomat ................................. 24 WoodMizer ................................ l out written consent. ©2017 Woods Publishing
800-355-1250
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 9
MORBARK
infeed
system;
Hammermill
Phone drive includes all belts, sheaves, 1987 MORBARK 27 WCL315.284.4126 Fax bushings & shields. Engine gauge NEEDS MOTOR 315.849.2045 panel & emergency shut down Morbark 1000 Knuckle boomWebsite www.empirehyd.com system located in an anti-theft loader, 3 knife disc, Newer Email console. Electronic rpm sensor “Precision Under Pressure” info@empirehyd.com discharge chute, New banding
around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower. Item ID 12443. Sam x702 1997 MORBARK MODEL 2400 CHIPPER Has a Cumins diesel engine and runs great. All fluids and filters have been changed. Item ID 13429. Sam x702
1999 MORBARK 1400 TUB GRINDER Loader w/Cab; 4200 hours; Very good condition. Located in PA. Item ID 13361. Sam x702
& auto feed system. 430 Gallon fuel tank. 238 Gallon hydraulic oil tank. IQAN control system. Dust suppression system. Hyd operated debris containment door. 16 Function radio remote. Super package! Optional new knife skin - $20,000 which is half price of new. Item ID 12692. Sam x702 MORBARK 1200 TUB GRINDER Powered by a 3412 Cat engine, 600-hp. Tilt tub. Hours are unknown. Please call Daren at Ext. 702 for more details. Item ID 12919. Sam x702 WOLVERINE
1995 MORBARK WOLVERINE 3-WHEELED FELLER BUNCHER S/N 4073. Only 1000 hours 2006 MORBARK 6600 on new JD 4 cylinder engine. HORIZONTAL GRINDER 13428 Victory Ln. // PO Box 124 Recently replaced turbo. 23.1 Approx. 6000 hours on this well Adams Center, NY 13606 maintained machine. Has New tires at 50%. 16” Rapid Buncher Cat Dealer Rebuild 1000HP shear head. Machine is fast and Engine at 5000 hours. 42” X 66- in very good condition. Item ID 12531. Sam x702 5/8” Hammermill; variable speed
PRENTICE
1988 PRENTICE 210B New battery and starter a year ago, new alternator less than 2 years ago. Continuous rotation grapple, has 3-53 detroit engine, lever controls, plumbed for bucksaw. Mounted on a 1978 GMCHalverson Brigadier with 6-71 detroit ‘16 H140 with a 10 speed. Runs everyday. Skidsteer (DEMO) Item ID 13703. Sam x702 Item ID: JW-909632 Contact: J Williams 1992 PRENTICE 210D LOADER Ph: (888) 401-6367 Excellent condition, x701 very tight loader mounted on a 1989 Mack truck with very good tires. Item ID 13654. Sam x702 1997 PRENTICE 210E New 5.9 cummins engine, turntable bearing and seal, fuel pump and battery. Joystick, Heat and A/C, boom repinned, cylinders repacked. Total hours ‘13 KMC 2500hookup. Track at 12000. Bucksaw This loader is used to feed a chipper. Skidder Item ID 13795. Sam x702 Item ID: 14078 Contact: 1999 Austin PRENTICE 210E Ph: (888)with 401-6367 x703 LeComes a bucksaw. vers, 11000 hours. Repacked all cylinders and valve body. off ontoloader a conveyor. Thisbeen is a very This has only used well built processor. Item ID 13820. Sam x702
to cut up logs into 9’ lengths. Never used as a delimber loader. Item ID 13784. Sam x702 2014 PRENTICE 2384C LOADER PACKAGE with CSI 264 Ultra Delimber and Rotobec 4048 Grapple. Only 1050 ‘93 Barko 180B hours! Mounted on trailer with hyItem stands. ID: 14077 draulic Excellent condition. Contact:shutti Austin Contractor ng down job. Ph: (888) x703 Item ID 401-6367 13577. Sam x702 2432 2010 PRENTICE SKIDDER It has 30.5 tires al the way around and has 6,000 hours on the machine. Item ID 13382. Sam x702 PRENTICE 310E Good loader for the money. Item ID 13762. Sam x702
‘95 John Deere C6 PRENTICE 120C BOOM TRUCK Tree Farmer
Great res,13920 new paint, & lights, ItemtiID: with a 350 Cummins Engine 3 Contact: Austin stage jake. Ph: (888) 401-6367 x703 Item ID 13900. Austin x703 1994 PRENTICE 180D LOG LOADER capacity!. Item ID 13421. Sam x702 11,793 hours, Machine is in good BARKO condition, it has been sand blasted 1994painted, Barko 160B Electric and low -pro tires 17.5. Item ID 12759. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID Firewood Processor - This is P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438
13238. Chris x700 a Chomper Model 16 PDA www.multitekinc.com • sales@multitekinc.com ‘05 Gehl CTL 70 1995 Barko 775 B Feller Buncher automatice firewood processor
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703
Multitek Firewood Processors
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
with John Deere power unit with
- Pumps recently redone. 400 hrs
tach, oil pressure, water temp and
good. in good working order. 22in
low hours. Control panel includes
on injection pump. always started
Increase Your Productivity and Profitability kohing head. head works great. amp gauges. Cuts logs up to 16”.
• Quality Equipment to Reduce Labor Costs Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes your with all Circular Saw manuals or Bar and & Chain 20,000lb goose neck•trailer. Item ID receipts.Models Purchased
1999 Barko 160D - new engine with
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins
delimber, grapple has been rebuilt. Made in the U.S.A. Boom cylinders have minor leaks.
Diesel. 7500 Hours. One owner.
94 Barko 275 - Excellent value
condition. Easily produces high
FromItem ID 13865. approximately 1500 hours. Hour 13916. Austin x703 • 7 Models to Choose new for $32,500. • Production Ratings up to 5.5 Full Cords Per Hour meter dont work. The last 2 owners Best Value Portable Log Splitter Sam x702 have only used it to load trucks or - Small manufacturer in PA has LOGGING EQUIPMENT as a backup as needed. Has a CTR made the best valued log splitter. BANDIT
drum design. Can easily load 42’
13HP Honda motor. Manual start
with 1700 hours, in very good
quality chips with patented ‘Cone’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot 376 Issue 364
Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
Item ID 13694. Sam x702
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com
210 PRENTICE LOADER MOUNTED ON 2006 TRAILER Excellent condition. Item ID 13505. Sam x702 LATE 80’S PRENTICE 210 LOADER This is a late 80’s model, it had a new motor installed 2 years ago with around 3,000 hours on it, also comesThe with Tree a circle saw. Item IDthat 13879. Austin x703 Started
it All!
1998 PRENTICE 210E ItSince has 1986, the 600 turbo charged Lumbermens has cummins engine, control valves published a monthly circular have been redone, ac/heater reaching sawmills, loggers, work, makers, recyclers and ups. itpallet also has slasher saw hook industrial Dry machine,woodworking working daily.plants worldwide. Item ID 13913. Austin x703 ROTOCHOPPER PUBLISHER Woods Publishing 2011 MC266T ADVERTISING SALES ROTOCHOPPER Morris Woodswith only This is a great chipper 401-6367 704C15 3600 (888) hours. It has a ext. 500hp morris@lumbermens.co Caterpillar power unit. Comes DIRECTOR with MARKETING spare bolts, teeth, screens John Williams and bearings. (888) 401-6367 ext. 701 Item ID 13837. Sam x702 j@lumbermens.co
DESIGNROTOCHOPPER DIRECTOR 2014 B66TD Donna is Heninger This machine still like new with only 1300 hours on rotor EQUIPMENT REPS
** CALENDAR**
and 1600 on engine. This is a track and dolly system, which makes it easy to move. Has a magnetic head roller, 48” rotor STATE WOODSMEN'S FIELD DAYS with 28 teeth and a NY 700hp Fri, 18 August - Sun, 20 August C-18 Caterpillar power unit. This rotochopper sells for over Boonville, New York www.starwebhosting.net/woodsmen/ $600,000.00 new. Item ID 13838. Sam x702 TIGERCAT
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
Danckaert Band Resaw - Roughly
2000 TIGERCAT 845B Hot Springs, Arkansas it has 8900 hrs. the Hydraulic www.arkloggers.com Pump haIGERCATs 2000 hrs on it. We replaced the saw pump 72ND ANNUAL GREAT LAKES last summer. Ready to go! LOGGING & HEAVY EQUIPMENT EXPO Item ID 13619. Sam x702 Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan 2000 TIGERCAT 845B This 845B has 14000 MID-ATLANTIC frame LOGGING & BIOMASS hours with 5000 hours onFri, 15 Sept - Sat, 16 Sept an 8.3 cummins engine. New Selma, North Carolina sprockets, bottom and www.midatlantic-logging-biomass top MID-ATLANTIC rollers, idlers, expo.com/ LOGGINGrails, & BIOMASS EXPO36” tracks, seat and all new A/C parts. Track adjusters, and all cylindersKENTUCKY WOOD EXPO on head have been repacked.Fri, 15 Sept - Sat, 16 Sept Comes with a 22” hotsaw with Lexington, Kentucky 45 degree rotate. This is a very http://www.kfia.org/ clean cutter, owner just wantsKentuckyWoodExpo.aspx to update. Item ID 13939. Sam x702 THE PAUL BUNYAN SHOW
10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track
Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 11
ve
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Shrink Wrap FireWOOD/WaSteWOOD
“Precision Under Pressure”
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
Sell Your WOOD – $300/cord or More!
Double or triple your profits by shrink wrapping wastewood - forewood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for producing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee. ‘13 KMC 2500 Track B & B Manufacturing • 3007 West River Road Skidder • Olean, NY 14760 Item ID: 14078
Contact: Austin Toll Free 1-800-654-5320 Ph: (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
E-mail: bbmfg@verizon.net • Web: www.bbmfg.org
off onto a conveyor. This is a very
well built processor. Item ID 13820.
BELL’S FIREWOOD PROCESSORS Sam x702
Firewood Processor - This is
• 66 HP CAT Diesel Engine • 44” Circular Saw • 20” Diameter CATCapacity D4H TSK Item ID: 13558 • Single Joystick Contact: Sam Control Item 14073 •(888) 30ID: Ton Splitter x702 Ph: 401-6367 Contact: Austin Cylinder
‘83 John Deere 4850
Ph: (888) 401-6367 x703
‘05 Gehl CTL 70
Item ID: JW-986495 Corley Complete Contact: J Williams Sawmill Ph: (888) 401-6367 x701 Item ID: 14035 Contact: Austin chain conveyer, 8 way splitter, Ph: (888) 401-6367 x703 on
20,000lb goose neck trailer. Item ID 13916. Austin x703
a Chomper Model 16 PDA
automatice firewood processor 4000 SERIES with John Deere power unit with ‘02 Prentice 490
low hours. Control panel includes
Item ID: 14047
tach, oil pressure, Contact: Austinwater temp and amp Cuts logs up to 16”. Ph: gauges. (888) 401-6367 x703 One owner and comes with all
manuals and to receipts. Components 2017 orPurchased 3000 hours. new for $32,500. Item ID 13865. Totally loaded with extras. Has
Best& Value Portable Log Splitter Sam x702 manually. Great buy onChoose this Deere.From! counterweight/running boards. Many Models Options to
Only 4200 hours. Factory warranty with 5000 1700 hours. hours, Great in veryrunning good until condition. 35.5 Easily produces condition. tires at 60%. high Tight quality chips with patented ‘Cone’ and Dry. Great value. Item ID drum design. Can easily load 42’ 13482. Sam x702 vans John and produce 6 - 8 loads per 2012 Deere 548GIII - Single
day. with Item winch, ID 13882. Austin x703 arch blade extensions,
EDGERS GANGS 1 new 28L and 3 @&50%. This is Brewco Saws Two Brewco Saws still a new machine with only 3600 in excellent condition. Runs great. hours. Item ID 13780. Sam x702 Item ID 13644. Sam x702 2012/13 John Deere 200D
- Smallwindows manufacturer in keep PA has LOGGING EQUIPMENT Tinted to help the Includes the JD 22” Hot Saw with FIREWOOD TUMBLER made theheat bestout. valued sun and Itemlog ID splitter. 13856. 40 degree tilt. BANDIT 36” wide flotation • Sturdy HSS Steel Welded Handles up to 32”. Uses 1999 Bandit Tracked Disc Sam x702logs pads. Simply1900 perfect condition. • 4’ Diameter Barrel 13HPJohn Honda motor. Manual start Chipper - Cat Under Carriage at 2013 Deere 437D - This loader New price is $445,000. Save $40,000 • Clean Out Chute • Removes Debris & Bark as large as 2 ¼” but electronic option 50%only or better. 475 hp Cummins is still like brand new.isItavailable. has been for 380 hours of use!. Item ID • Works with all of our Double chain Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge well taken care of with only 2932 13574. Sam x702 Hydraulic Lift conveyors adjustable toOptional single two way. Series Great Well John maintained. ItemExcavator ID 13294. hours. CSI•delimber, Kodiak, 2014 Deere 160G Honda Power Pack Available Value! PA. Item ID 12062. Sam x702 Sam x702 3 hydraulic landing gear. You will Low hour excavator with only 1500 Firewood Processor -Made This a Inisclean. not find another loader this Canada homemade processor with a 10’ Item ID 13822. Sam x702
FIREWOOD PROCESSORS log deck. HasFeller a hydraulic Excavator - This is still a like new 2014 JD 753J Bunchergrapple, - NEW! Please Call for Details 2010 Shopwith Builtonly Wood Processor kickerOnly that 381 all runs off excavator 3000 hours. -chain Treatand as NEW! hours. orwith visit us online www.bellsmachining.com -Comes It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power a stationary rockland Standard warranty expired, but
1-888-995-1965
Financing inch insert saw, 30 foot Available unit.Extended Has a 4’ chain sawon that kicks thumb that tooth can becircle adjusted has Warranty Major 376 Lumbermens Issue Issue 364 364 Lumbermens since since 1986 1986
❘❘
2004 Bandit Model 4680 - ID hours. Still aBeast new machine. Item 3412 Caterpillar 13841. Sam x702 Diesel engine with John 850 HP. 5300 hrs.-Mill in 2014 Deere 643K There’s good condition. Just finished 10 not much to say about this feller
Acre clearing job,brand readynew to work! buncher. It’s still out Remote control. Big production of the box with only 1452 hours.
List seLL exchange save ❘ List seLL exchange buybuy save
2004 TIGERCAT 240B KNUCKLEBOOM New 5.9 cummins crate engine with 2500 hours, turntable good, 243 CSI delimber, good tires, brakes, and lights. 7500 hours. Item ID 13666. Sam x702
‘93 Barko 180B
Item ID: 14077 2004 TIGERCAT 620C Contact: Austin ‘97 Timberjack Single arch, new engine 2 Ph: (888) 401-6367 x703 months ago, has about 13,500 360C hours, needs a couple of Item ID:Tires 14044 windows. at 50%. Contact: Sam Sam x702 Item ID 13667. Ph: (888) 401-6367 x702 2004 TIGERCAT 630C New 35.5’s on rear and 25% on front, comes with 2 spares. Engine has 4500 hours, with 12000 machine hours. Two new ‘95 John Deere C6 wiring harness. Item ID 13749. Sam x702 Tree Farmer
Item ID: 13920
2004 TIGERCAT 845B Contact: Austin548D John Deere
with Waratah 622 Processor. Ph: (888) 401-6367 x703 Item ID: 14024 New screen, wheels, sprockets Contact: and wheelSam motor. Owner used Ph: (888) 401-6367 x702 it for a month before parking capacity!. Item ID 13421. Sam x702 it. 5,000 hrs. on 8.1 cummins BARKO Has a 2000 hour warranty. It comes engine, and 6990 total hrs. 1994 Barko 160B Electric Item ID 13625. Sam x702 mounted on 30.5 tires at 95%. knuckleboom, 30' tower boom,head. 75hp Item Comes with a 22” 2005 TIGERCAT 230B motor, Rotobec continuous ID 13864. Sam x702
Tight, and dry machine, with
grapple, original 2015 John5,000 Deere 748L - hours. This is 16,000 hours on the machine, (excellent condition.). Item still skidder with 1480 newa new motor put inonlyID around
13238. Chris x700 10,000 hours, Delimber hours. Owned by aCTR construction trailer included, and reversible 1995 Barko 775isBno Feller Buncher company that longer needed.
CSI Bucksaw, will sell with, or
- Pumps recently hrs Dual arch, winch, redone. joystick400 controls, without Bucksaw. on injection always started turn around pump. seat, wide blade and
Item ID 13911. Austin x703
good. in good order. 22in HD axles. Was working bought new in Jan kohing head. head works great. 2005 TIGERCAT 822 and still has factory warranty and
TRACKED FELLER BUNCHER Item ID 13185. Sam x702 an extended warranty can still be Good running condition. 1999 Barko 160D new engine bought for this skidder. Save a with Tigercat 22” Hot Saw with
approximately 1500 hours. Hour lot money ontilt. this slightly used 40ofdegree New center meter dont work. The last one. 2 motor. owners skidder overand a brand new bearing swing
have only usedSam it tox702 load 50% trucks oror Undercarriage at Item ID 13933. better. Very clean. High as a backup as needed. Has a CTR 2015 John Deere 748L - This
hours, but well cared for by
delimber, hasnew beenwith rebuilt. skidder is grapple still smells single owner of land clearing Boom1000 cylinders have leaks. only hours of use.minor Mounted
business.
Often
idled
for
Item IDX13694. Sam x702 on 30.5 32 tires with a19,500. new set hours. Total hours 94 Barko 275 Excellent Item ID 13575. Sam x702 of tire chains. Dual arch, value winch,
with lowcontrols, at hoursturnaround at 3,500. 5.9seat, joystick 2006 TIGERCAT 630C CUMMINS continuous grapple. wide blade and HD axles. Save
GRAPPLE SKIDDER
Runs IDnew 13740. Sam on thisGreat!. over aItem brand skidder Very good running conditi on. x702 because this isgrapple. still new. New Item ID Dual Arch 35.5
BELLhours. Winch. tires. Sam Onlyx702 4500 13935. Compare to 630 1990 Bell Super T 440B/C -new This Bell has at 84/85 John Deere - This $310,000!
a brand came new Duetz engine. Lever skidder in a box to Lavaco Item ID 13576. Sam x702 control,Co 33” pump and and is tranny Power inbar, Colorado a
❘ LumbermensCO.com Lumbermensmagazine.com
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
The Tree that Started it All!
Hot Springs, Arkansas www.arkloggers.com
Escanaba, Michigan
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
John Deere 548G2
Send address changes to: Item ID: 14042 Lumberman's Exchange P.O. Box 1916 Contact: Austin Columbia, TN 38402 Ph: (888) 401-6367 x703
The Lumberman's Exchange is published by Woods - 3410 monthly hours. $32,000 in recent Publishing, P.O. Box 1916, upgrades repairs. Fecon Columbia, TN and 38402. All rights reserved. AllMulching editorial/Head. advertorial BH250 Item ID submissions are used at the 13502.ofSam discretion the x702 publisher and may be edited for purposes 2011 Tigercat 620Dof- clarity This is a and space. Although all efforts have low hour skidder with only been made to ensure accuracy of 5500 content submitted by advertisers hours on a cummins engine and and writers, the Lumberman's a fire suppression Comes Exchange, its principlessystem. and associates, are not held liable for mounted on 35.5 tires at 50% back errors or omissions. Reproduction, and 40% front and good chains in whole or part, is prohibited with on out written consent. all 4 tires. Has the bigger 630 axles ©2017 Woods Publishing
and no winch. Center pins are tight
bells and whistles, its a production that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This
Every ReputableisWide Band an extremely accurate machine Supplier Offers in ve1y good condition, Cuts 130 KENTUCKY WOOD EXPO
Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio BUT ONLY www.ohioforest.org
‘05 Woodmizer LT300
works,1 1/2" or 2" band, 22ft. track
WOLVERINE
Cat 3406 140KW Genset, 12,400
THE hours ready to run. Item ID 13434. Sam BY MENOMINEE SAWx702 GUARANTEES
** INFO LINK**
Bell's Machining ..................... 27
CARRIAGES & DRIVES • Cutting Edge Plasma 2010 Welds Cardinal HD Carriage • The Industry’s HighestCarriages Band Saw Capacity (Sawmill) - Cardinal Carriage line it includes carriage • Quick Delivery from our HUGE Inventory M&F Gauge ............................. 28 with onboard log turners, carriage • Fast Program Meadows Mill,Sharpening Inc. ................ 33& Exchange drive, hyd pac for carriage, to Keep YOU Running Menominee Saw ..................... 29 sawyers cab, computer controls, • Competitive Pricing cabinet with electronic drives for Metal Detector's Inc. .............. 30
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
Item ID: 14031 Contact: Austin B &Ph: B Mfg . ............................... (888) 401-6367 x703 18
B. H. Payne .............................. 16 Baker ...................................... 5, 7
carriage knees, husk including
CRD Metalworks .................... 25
And ONLY Menominee Gives You Everything 48" bottom saw and 36" top saw Morbark ..................................... You need in a 9Wide Band Saw – Plus Multitek ................................... Expert Service 12 from the Industry’s Most Knowledgeable Staff. Piper's Saw Shop.................... 13
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20 Call Menominee
Buck Equipment (AIM) ........ 36 Corley Mfg .............................. 32
‘14 B66TD Rotochopper Item ID: 13838
Dyna Products ........................ 35 Contact: Sam
(888)Hydraulics 401-6367 Ext. 603 8 Empire ...................
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Item Machinery ID 13408. Sam x702 Hahn ...................... 3
The Paul Bunyan Show ......... 39
Please see us at 2014 Boiler Tigercat 630D Grapple Hurst ............................. 14 Skidder - Dual Arch Grapple. Just Iron Bull ................................... 21 1990 hours. 3 year/5000Booth hour #421PT Kilgore Saw ............................. 22 warranty. 35.5 tires with dualing Lignomat ................................. 24 rings at 60%. Wide blade. Winch.
Item ID 13526. Sam x702
234B. Only 300 hours on this
STACKING RAC
Got a Wide Band Problem? Saw Today and You’ll Sawmill Exchange .................. 11 Learn Why More Mills Trust the Pro!
Thomas Industrial Controls..... 10
TOLL FREE 1-800-582-0470
900 16th St., Menominee, MI 49858 Tel: 906-863-2609 Fax: 906-863-1147 Universal Refiner ................... 23 Email: info@menomineesaw.com
Union Grove Saw & Knife.. 2, 37
www.BakerProducts.net WWW.MENOMINEESAW.COM 800.S48.6914 I S73.663.7711
WoodMizer ................................ l
FORESTRY EQUIPMENT FOR SALE SELL EQUIPMENT TODAY ❘ the grapple 24/7 SUPPORT - USED l§ 0 2015❘ Tigercat 234BYOUR Loader - Model and extra fuel tank. Item ID 13929. roatation on w/ a
Sam x702
with 44 inch wheels, and all the
3 Double Cut OptionsCaterpillar generator - Low hours on the mill, electronic computer Set THE PAUL BUNYAN SHOW 3 Choice of Swage or Stellite
‘06 Brewco B1600 DESIGN DIRECTOR Donna Heninger Resaw
MAILING ADDRESS
feed deck 20 foot out feed deck
Lexington, Kentucky 3 3” – 8” Band WidthItem ID 13876. Austin x703 http://www.kfia.org/ S & W 125 Band Mill with 3 16 to 20 Gage KentuckyWoodExpo.aspx
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
10 hours on this machine since it
feet aSteel minute also has CLT presses. Fri, 15 Sept3- High Sat, 16Quality Sept Swedish
MARKETING DIRECTOR
EQUIPMENT REPS Item ID: 13862 Sam Wall Contact: Samext. 702 (888) 401-6367 sam@lumbermens.co Ph: (888) 401-6367 x702
Danckaert Band Resaw - Roughly
machine, with air strain conveyers
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
BANDMILLS & HEADSAWS has been rebuilt, it has a 24foot in
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
30’ reach on the boom. Joystick
❘ 2006 (888) 401-MENS L! Tigercat 630C GrappleNO. 13
Skidder - Very good running
60%. Everything runs well and 2007 TIGERCAT 250B Phone W/WARATAH PROCESSOR has been very well maintained. 315.284.4126 2007 Tigercat 250B Crawler with Fax Item ID 13592. Sam x702 315.849.2045 2005 Waratah 622B ProcessingWebsite Head. 9500 hours. The www.empirehyd.com 622B 2010 TIGERCAT 480 Email Waratah head isPressure” in great shape. TRACKED MULCHER “Precision Under info@empirehyd.com 3 new wheel motors on the head 3410 hours. $32,000 in recent all new pins and bushings. Head upgrades and repairs. Fecon has been totally rebuilt less than BH250 Mulching Head. 500 hrs ago. The swing motor on Item ID 13502. Sam x702 the carrier has just been rebuilt and a new Hydraulic pump. U/C 2011 TIGERCAT 620D at 50%. Currently processing This is a low hour skidder with 600 tons/day. Runs great. Owner only 5500 hours on a cummins shutting down. engine and a fire suppression Item ID 13360. Sam x702 system. Comes mounted on 35.5 tires at 50% back and 40% 2009 TIGERCAT 620C front and good chains on all 4 This skidder only has 10575 tires. Has the bigger 630 axles hours with a cummins engine and and no winch. Center pins are fire suppression system. Tires tight and extra fuel tank. are 30.5 X 32 with 20% front, 1 Item ID 13929. Sam x702 new rear and 1 rear at 50%, 4 tire chains at 40%. Dual arch and no 2011 TIGERCAT 845C winch, extra fuel tank and tight Just over 4000 hours. 5400 center pins. Excellent skidder head and 340 degree rotation, ready to start dragging wood. undercarriage at 70%. MerItem ID 13928. Sam x702 cedes engine and fire suppres13428 Victory Ln. // PO Box 124 sion system. This is a great buy Adams Center,H250 NY 13606 for for such a super clean track 2009 TIGERCAT TRACKED HARVESTER cutter. Tigercat Model 575 processing Item ID 13927. Sam x702 head. 10,880 hours. U/C at
2012 TIGERCAT 724E FELLER BUNCHER 2950hrs. 30.5 tires. Like new machine. One owner. Very well maintained. Item ID 13528. Sam x702 2014 630 D TIGERCAT 1300hrs like new inside 35 by ‘16CB, Halverson H140 15, light package, large grapple and wench. Skidsteer (DEMO) ItemID: IDJW-909632 13408. Sam x702 Item
Contact: J Williams 630D Ph: 2014 (888) TIGERCAT 401-6367 x701 GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 hours. 3 year/5000 hour PT warranty. 35.5 tires with dualing rings at 60%. Wide blade. Winch. Item ID 13526. Sam x702 2015 TIGERCAT 234B LOADER Model 234B. Only 300 hours on this machine, this machine ‘13 KMC 2500 Track is extremely fuel efficient, and Skidder very quiet. In the cab, it has heated and cooled seats. runs Item ID: 14078 like new. Contact: Austin Item ID 13880. Austi n x703 Ph: (888) 401-6367 x703 99 TIGERCAT 240B LOADER This loader is a package deal, off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
Firewood Processor - This is
‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot 376 Issue 364
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter - Small manufacturer in PA has
made the best valued log splitter.
a Chomper Model 16 PDA
automatice firewood processor
with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all
manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.
Well maintained. Item ID 13294. Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in
portable, and mounted on a dump truck from the eighties. Also this loader can be mounted back on its trailer with delimber. It has 4509 hrs on a reman Cummins engine. Item ID 13455. Sam x702
‘93 Barko 180B TIGERCAT 230B
Item ID: 14077 This Tigercat has a Cummins 5.9 Contact: Austin liter 360 Conti nuous roatation Ph:the (888) 401-6367 on grapple w/ a x703 30’ reach on the boom. Joystick Controls, triple pump hydraulics, Stick and swing function w/ a fully enclosed Cab. Machine is located in Florida. Item ID 13643. Chris x700 TIGERCAT 250T TRACK LOG LOADER ‘95 John8.3Deere Cummins engineC6and pumps have been done Tree Farmer probably hours Item ID: 8,000-9,000 13920 ago. It has 45,000 hours. Contact: Austin This has never Ph: machine (888) 401-6367 x703 run in the woods. It has been in a yard the whole time. Tracks are around 50% and this capacity!. Item ID 13421. Sam x702 machine has been extremely BARKO well taken care of! 1994 Barko - Electric Item ID 160B 13608. Chris x700 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702
1999 Barko 160D - new engine with approximately 1500 hours. Hour
meter dont work. The last 2 owners have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL
good condition. Just finished 10
1990 Bell Super T - This Bell has
Remote control. Big production
control, 33” bar, pump and tranny
Acre clearing job, ready to work!
List seLL exchange buy save
a brand new Duetz engine. Lever
❘
LumbermensCO.com
**
FOR CLASSIFIEDS JAMES G. MURPHY CALENDAR** CO. - NO MINIMUMS - NOCall RESERVES 888.401.MENS
PUBLIC AUCTION
See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
The Tree that Started it All!
FGS SAWMILL SAWMILL & ROLLING STOCK BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
Danckaert Band Resaw - Roughly
9AM - WEDNESDAY - AUGUST 8 Hot Springs, Arkansas www.arkloggers.com
10 hours on this machine since it
has been rebuilt, it has a 24foot in
229 SOUTH PHILLIPE LANE, YREKA, CA
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
bells and whistles, its a production
machine, with air strain conveyers that go up and down, with airbags,
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
with 44 inch wheels, and all the
Escanaba, Michigan
PUBLISHER
ADVERTISING SALES
feed deck 20 foot out feed deck
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
MID-ATLANTIC
LOGGING & BIOMASS EXPO
pressure guides. Top Casting wheel
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
ROLLINGJohn STOCK Williams 2013(888) CAT 401-6367 988H LOG ext. LOADER 701 W/FORKS 2013 CAT 966K LOG LOADER W/FORKS & BUCKET j@lumbermens.co LETOURNEAU 259SS LOG STACKER, DETROIT DIESEL (REBUILT) DESIGN 2013 CAT 325D DIRECTOR FM LOG LOADER, TRACK MOUNTED Donna Heninger 2014 CAT 226B-3 SKID STEER LOADER W/BUCKET & FORKS GEHL-DYNALIFT DL12-40 EQUIPMENT REPSFORKLIFT, 12,000 LB CAPACITY 1993 HYSTER H180E Sam WallFORKLIFT, 18,000 LB CAPACITY 2008(888) HYSTER S50T FORKLIFT, 401-6367 ext. 702 4650 LB CAPACITY 2003sam@lumbermens.co HYSTER S50XM FORKLIFT, 4650 LB CAPACITY HYSTER H50XM FORKLIFT, 4400 LB CAPACITY Austin Woods 2006 GENIE Z60/34 4X4 60’ MANLIFT, HOUR METER READS: 849 401-6367 ext. 703 1976(888) KENWORTH TANDEM AXLE WATER TRUCK, CUMMINS ENGINE austin@lumbermens.co GENIE 1930 SELF-PROPELLED MANLIFT, HOUR METER READS: 84 JOHN DEERE 4X4 HPX GATOR W/DUMP
MAILING ADDRESS
it includes two sets of Mcdonough
feet a minute also has CLT presses.
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
works,1 1/2" or 2" band, 22ft. track
Cambridge, Ohio www.ohioforest.org
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18 M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage SAWMILL EQUIPMENT Columbia, TN 38402-1916 B. W/APPROX. H. Payne .............................. NICHOLSON A5A 22” 6-ARM DEBARKER 100’ OUTFEED 16 Meadows Mill, Inc . ................ 33 drive, hyd pac for carriage, (888) 401-6367 BELT CONVEYOR, DRIVES, ELECTRICS, MDI WHOLE LOG METAL CUT OFF SAW W/HOURGLASS ROLL Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS DETECTOR, (4) KICKERS, PLATE ($150,000 UPGRADE) 60’ LOG HAUL W/DRIVE May be sent to CAE SL2000 SMALL LOG PROCESSOR,Bell's 16” SIDE CANTER..................... HEADS, TOP27 Metal Detector's Inc . .............. 30 cabinet with electronic drives for Machining 100’ BELT CONVEYOR W/STEP FEEDER morris@lumbermens.co & BOTTOM PROFILE, HORIZONTAL GANG SAW, DOUBLE LENGTH knees, husk including (2) 5-SECTION SORTERS W/(5) BELT carriage CONVEYORS, Brute Force Mfg.MPM ..................... INFEED ALLEN BRADLEY CONTROLS, ELECTRICS, WHOLE 31 Midwest Sharpening.............. 26 POSTMASTER (5) ROTARY SORT TABLES W/SCISSOR LIFTsaw and 36" top saw 48" bottom LOG METAL DETECTOR, (2) 300 HP ARBOR, (2) 300 HP TOP/BOTTOM Buck Equipment (AIM) ........ 36 Mor bark ..................................... Send address changes to: (6) 20’-200’ BOX CHAIN CLEAN9 OUT CONVEYORS CHIPPER, SOFT START, ABB 3 SECT Lumberman's Exchange 4-STRAND LOG DECK (2) PAUL CNC CROSS CUT CHOP SAW Corley LINES TO INCLUDE: PAUL CHOP Mfg .............................. 32 Multitek ................................... 12 P.O. Box 1916 TORIT DAY BAGHOUSE W/FAN SAW LINES W/(2) PAUL CHOP SAWS, SCANNER, (2) TDS SPRAY Columbia, TN 38402 PACIFIC BUNDLE SAW, S/N:20152 Piper's SawTRAIL Shop014-EMMSS ....................PACKAGE 13 CRD Metalworks .................... 25 BOOTHS, BELT INFEED & OUTFEED, (6) PAUL SORTERS, (2) PAUL (2) QUINCY OMAPACA31B, 150 HP AIR COMPRESSORS STACKERS, OUTFEED TRANSFERS, DRIVES, ELECTRICS, SUPPORTS The Lumberman's Exchange is 40 CW Mill-ArmorHog .............. 17 Rotochopper GROUP OF............................ POWER WIRE & CONDUIT TO INCLUDE: (2) TIMBERLAND NOTCHERS W/INFEED & OUTFEED, STACKER published monthly 4’ byMACHINE Woods (3) TRANSFORMER SWITCHGEARS, 600 AMP, 15KV-95KV, & STICK CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 Publishing, P.O.PLACER, Box 1916,S/N:530030 & 530029 (1) IEM SWITCHGEAR, SIEMENS CONTROLS PERFORMANCE PROCESSING GROUP (PPG) 200 HP HOG W/BELT INFEED, Columbia, TN 38402. All rights (2) RICE LAKE EZ7011-ST-100-OTR TRUCK SCALE, 200,000 LB CAP Dyna Products ........................ 35 Sawmill Exchange .................. 11 METAL DETECTOR, BIN, OUTFEED CHAIN, ELECTRICS reserved. All editorial/ advertorial SIDE LOAD KILNS submissions used at HP the CHIPPER, S/N:Empire BRUNETTEare 3230, 150 14-02900 Hydraulics ................... 8 Select Sawmill ......................... 19 TRAILER LOADER W/ACCO WRIGHT, 7-1/2 TON HOIST discretion of the publisher andBINS may (2) APPROX. 24-UNIT CHIP SHOP EQUIPMENT, CONVEYORS, TRANSFERS, WELDERS, be edited for purposes of clarity Great Lakes Mfg . .................... 34 Smith Sawmill ........................... 4 (2) APPROX. 30-UNIT CHIP BINS TOOLS, SPARES, STORES & MUCH MORE! and space.WAVE Although allFEEDER efforts have LINDEN STEP Hahn Machinery ...................... 3 The Paul Bunyan Show ......... 39 been made to ensure accuracy of content submitted by advertisers Hurst Boiler ............................. 14 Thomas Industrial Controls..... 10 and writers, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 Union Grove Saw & Knife.. 2, 37 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 Universal Refiner ................... 23 in whole or part, is prohibited with www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l out written consent. 800.S48.6914 I S73.663.7711 ©2017 Woods Publishing
STACKING RAC
MURPHYAUCTION.COM - 425-486-1246
FIND US ON FACEBOOK!
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
❘
(888) 401-MENS L!
NO. 15
runs great. Working in select 2006 TIGERCAT 630C Phone hardwood today. GRAPPLE SKIDDER 315.284.4126 Very good running condition. Dual Fax Item ID 13548. Sam x702 315.849.2045 Arch grapple. New 35.5 tires. OnlyWebsite www.empirehyd.com 4500 hours. Winch. Compare to 1997 TIMBCO 820C CLAM Email new“Precision 630 at $310,000! BUNK FORWARDER Under Pressure” info@empirehyd.com Item ID 13576. Sam x702 “4000” original hours. 20.3 x 25 rubber at 70%. Hand sanded and 2014 630 D TIGERCAT painted, brand new computer and 1300hrs like new inside 35 by Scorpion controls, added speed 15, CB, light package, large control. 2 sets of tracks , all new grapple and wench. Lexan. Located in Alberta, Canada. Item ID 13408. Sam x702 Customer will pay shipping to closest US entry point. 2014 TIGERCAT 630D Item ID 13532. Sam x702 GRAPPLE SKIDDER Dual Arch Grapple. Just 1990 1998 TIMBERLINE STROKE hours. 3 year/5000 hour PT DELIMBER warranty. 35.5 tires with dualing 8400 hours. U/C at 60%. Will rings at 60%. Wide blade. crank and run. Owner retired. Winch. Machine idle for past year. Item ID 13526. Sam x702 Item ID 13599. Sam x702 TIMBCO
1999 TIMBCO 820D CLAM 1996 TIMBCO T425B FB BUNK FORWARDER w/2008 Rotosaw Intermittent 10,300 hours. New engine Saw Head. Machine has 540 less than 500 hours ago. Can degree non continuous rotation accept bunks, but none with on upper. 9900 hours. New 13428 Victory Ln. // PO Box 124 machine. Owner has two sets Undercarriage. New glass in cab. Adams Center, NY 13606 of tracks like new he will add for Very good running condition. Rotosaw has 360 degree additional $20,000. Item ID 13494. Sam x702 rotation. Cummins 6CT8.3 engine with 215 HP. Machine
Sam x702
We have the most popular sizes in stock & ready to ‘05 Gehl CTL 70 ship from major manufacturers, including…
Item ID: 14073 Contact: Austin Welded to your Ph: (888) 401-6367 x703
Contact: J Williams 2000401-6367 TIMBCO 415D Ph: (888) x701 w/2005 FABTEK 4-ROLLER PROCESSOR 21,000 hours on meter. New JD 6 cylinder engine in 2011 has 7000 hours. U/C at 65%. Extensively rebuilt with new swing motor, new charge pump, new high speed saw motor, new main hydraulic pump, new oil cooler, all main cylinders repacked. includes ‘13 KMCPackage 2500 Track extra final drive, extra computer Skidder screen, and extra swing motor. Has new jet fit system. This Item ID: 14078 machine is loaded...has pro-heat Contact: Austin system for cold weather Ph: (888) 401-6367 x703 start. Has fire suppression system. All working! Hydraulic Oil justonto totally changed new off a conveyor. This(100 is a very well built processor. Item ID 13820.
BANDSAW BLADES ‘83 John Deere 4850
1999 TIMBCO TF-820D FORWARDER 11k hrs on machine, new Cummins engine at around 8k hrs and has fresh drive pump & imp. pump. 28L 26 tires some great, some decent. Machine is ready to work, but could use a little fixing here and there. the bucket Halverson is‘16 sloppy could stand toH140 be pinned and bushed. No major issues! Skidsteer (DEMO) ItemID: IDJW-909632 13212. Sam x702 Item
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
Firewood Processor - This is We also offer expert
gallons) with new filters. Item ID 13598. Sam x702 2000 TIMBCO 425D W/33” BAR SAW HEAD 40 degree tilt on head. 540 degree rotation on upper body. One year old Cummins 6CT8.3 engine. ‘93 Barko 180B Resealed pumps. Rebuilt valve Item ID: bank. 90%14077 undercarriage. Can Contact: accept hot Austin saw. Fire suppression Ph: (888) 401-6367 x703 Good system. Auxiliary oil cooler. running machine. Item ID 13549. Sam x702 2000 TIMBCO 445D Recent engine and pump last winter. New sprockets and rollers. 22” quadco hot saw. Owner retired. Located in Montana. Item ID 13790. Sam x702
‘95 John Deere C6 2005 TIMBERPRO Tree Farmer 830TF
FORWARDER Item ID: 13920 6580 hours. Very good condiContact: Austin tion. Tracks for all bogies. 710/45Ph: (888) 401-6367 x703 26 tires at 70%. Includes bolsters and back rest. Comes with 36” grapple with grapple saw option. capacity!. Item ID 13421. Sam x702 Set up with harvester hydraulics acBARKO cording to owner. 1994 Barko - Electric Item ID160B 13161. Sam x702 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). ID Sharpening Services,Item plus…
13238. Chris x700 Gang • Edger • Scragg 1995 Barko 775 B Feller Buncher automatice firewood processor recently 400 hrs with John Deere power unit with Trim •- Pumps Split •redone. Strob a Chomper Model 16 PDA
on injection pump. always started just about any Custom Saws you good. in good working order. 22in tach, oil pressure, water temp and need to keep you cutting longer… kohing head. head works great. amp gauges. Cuts logs up to 16”. for less! low hours. Control panel includes
…and
chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID
lengths! 13916. Austin x703
One owner and comes with all
Item ID 13185. Sam x702
new for $32,500. Item ID 13865.
approximately 1500 hours. Hour
1999 Barko 160D - new engine with
manuals and receipts. Purchased
Call Marvin Miller for a quote 231-924-5953 (fax) 231-924-6166 • 11606 Brickyard Rd. Holton, meter•dont work.MI The49425 last 2 owners Best Value Portable Log • Splitter Sam x702 have only used it to load trucks or with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT as a backup as needed. Has a CTR condition. Easily produces high made the best valued log splitter. BANDIT
ROW ELECTRICAL EQUIPMENT, INC.
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
delimber, grapple has been rebuilt.
vans and produce 6 - 8 loads per
but electronic option is available.
50% or better. 475 hp Cummins
Item ID 13694. Sam x702
drum design. Can easily load 42’ day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor
13HP Honda motor. Manual start
Boom cylinders have minor leaks.
Chipper - Cat Under Carriage at
94 Barko 275 - Excellent value Diesel. 7500USED, Hours. One owner. Has Log Lift. Uses 4-way wedge YOUR SOURCE FOR RECONDITIONED:
• Squirrel Cage Motors Motors - CraneItem andIDMill with low atThree-Phase hours at 3,500. 5.9 adjustable to single two way. Great• DCWell maintained. 13294.• Transformers, • Gear Motors • Wound-Rotor Motors Firewood Processor - This is a • Synchronous Motors homemade processor with a 10’ • DC Motors
• • • •
Value! PA. Item ID 12062. Sam x702
Adjustable Speed Drives • Sam x702 Generators - AC and DC • 2004 BanditBuilt Beast Sets Model 4680 - • Shop Engine-Generator 3412 Caterpillar Diesel engine • Transformers, Single Phase Firewood Proc.
with 850 HP. 43606 5300 hrs. Mill in log deck. Has a hydraulic P.O. Boxgrapple, 2812 • Toledo, Ohio
Across/Line Magnetic Starters CUMMINS continuous grapple. PSB Post Peeler Reduced Voltage Starters Runs Great!. Item ID 13740. Sam Safety Switches Item ID: 13926 x702 Phase Convertors Contact: Sam BELL x702 Ph: (888) 401-6367
Item ID: 13994 ‘05 Timberjack 608B good Fax toand : kickerWWW.RoWELECTRiCAL.CoM 800-248-4479 1990 Bell Super T - This Bell has chain that all runs off condition. Just finished 10 Contact: Austin
Item ID: 13898 Acre job, ready tox703 work! of a 4 cylinder Mercedes power Ph:clearing (888) 401-6367 419-244-8887 Contact: Sam rowelec@glasscity.net
- It has a 353 Detroit diesel, 40
acylinder brand new Duetz engine.replaced Lever 419-248-4479 engine. Recently
control, 33”tires bar, pump Remote control. Big production unit. Has a 4’401-6367 chain saw x702 that kicks Electric 3Phase turbo. 23.1 at 50%.and 16”tranny Rapid Ph:THE (888) WE ANSWER PHONE 24 HOURS • WE BUY USED ELECTRICAL chipper hood for easy knife access. Buncher shear head. Machine is Slab Edger 376 Lumbermens since 1986 ❘ Issue 364 List seLL exchange buy save ❘ LumbermensCO.com
inch insert tooth circle saw, 30 foot
Item ID: 13998 Contact: Austin
condition machine. Item ID 13486.
30 ft. x 10 ft CAT chain infeed bed. Enclosed weatherized operators’
fast and in very good condition. Item ID 12531. Sam x702
** CALENDAR**
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
The Tree that Started it All!
Hot Springs, Arkansas www.arkloggers.com
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Escanaba, Michigan
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
MARKETING DIRECTOR
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct
DESIGN DIRECTOR Donna Heninger
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
** INFO LINK**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
SELL YOUR EQUIPMENT TODAY TODAY l§
❘
24/7 SUPPORT 0 SUPPORT
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L! (888) 401-MENS 401-MENS
NO. 17
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701
Item ID: 8940 Works and runs as it should. Great condition! 3 of the tires are at 50% tread, 1 is brand new, with a 6068T engine. All updates done, hasn't missed any!
120 Acres contains at Least 50 % Redwood, 10 To 15 % Doug Fir, the remaining is Tan Oak and Madrone, with a very Good Running Spring. In Mendocino County, in Northern California 13428 Victory Ln. // PO Box 124
Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170
‘13 KMC 2500 Track John Deere 650H Forestry Dozer Skidder Item ID: 14284
2002 650HItem LT Great ID:running 14078condition, no leaks, dry, everything works Austin as should, good winch. Contact:
B U Y S
Adams Center, NY 13606 $ 650,000 Call PETE at 707-815-3640
‘05 Gehl CTL 70
H O T
‘83 John Deere 4850
Tight machine, everything works as it should. Brand new front tires, back tires 50% tread. 6300 hours. Hydraulic and electrical plumbing durable and reliable. Good coolingID: system and fuel efficiency. READY TO GO! Item 14073
Contact: Austin Contact: JOE Ph: (888) 401-6367 x703 Email: Joe@lumbermensco.com
Phone: 888-401-6367 EXT 708 801-362-2170 with 1700 hours, in very good
grapple, 5,000 original hours.
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
Cat 272D skidsteer
in excellent condition. Runs great. Item ID: 14282
Item ID 13644. Sam x702 2015 Cat 272D skidsteer like new 260 hrs FIREWOOD in excellent condition! Everything PROCESSORS runs and works as should 2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot 702-875-2703 376 Issue 364
Firewoodhas Processor - This Motor & transmission been rebuilt. Frontisand rear ends have been gone thru. Cold air/heat works, radio a Chomper Model 16 PDA works but needs an antenna! Rear tires are NEW, front tires 70% tread. automatice firewood processor
Item ID:Cuts 14283 amp gauges. logs up to 16”. 2013 210 terex loader . 1560. Excellent chain conveyer, 8 way splitter, on One owner and comesHrs with all condition everything works as should! 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased Contact: MARK new for $32,500. Item ID 13865. Email: Mark@lumbermensco.com Splitter Sam x702 EXT 708 OR 702-875-2703 Phone: 888-401-6367
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
SUPER 13HP Honda motor. Manual start
but electronic option is
LOGGING EQUIPMENT TimberproBANDIT TL 745C
1999 Bandit 1900 Tracked Disc Item ID: 8010
CLEANChipper MACHINE! 4,600 Runs Carriage smooth! Has at a full - Cathours, Under rotation hot saw (A60 degree). Fire suppression cab, A/C & Heat. All hydraulics in good working order. Tilt cab machine (70% or better). available. 50% or better. 475 hp Cummins Hydraulic cylinders, Boom and saw head pins & bushings are good!
Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: JOE adjustable to single two way.
Email: Joe@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 709 OR 801-362-2170
Value! PA. Item ID 12062. Sam x702
Sam x702
homemade processor with a 10’
ID: 14281 3412 Item Caterpillar Diesel engine
of a 4 cylinder Mercedes power
Acre clearing job, ready to work!
Firewood Processor - This is a
2004 Bandit ModelSkidder 4680 John Deere 648HBeast Grapple
2011 648H 10,879 frame 30.5x32 65-70% tires, great machine, with HP.and 5300 hrs. Mill in deere log deck. Has a hydraulic grapple, kept very well, filters850 changed maintenance by john every 3,000 hours, runs as should, 4th machine just not being chain and kicker that all runs off condition. Justarch. finished used much good clean glass in cab single Ready to10work!
Contact: MARK
Email: Mark@lumbermensco.com Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
Phone: 888-401-6367 EXT 708 OR 702-875-2703
❘
also needs the small gear on the Rotobec head. It has saw and delimber hookups, but no saw nor delimber. Ready to be shipped! Good machine, gets the job done, works as it should!
Sam x702 Item ID: 4351
tach, oil pressure, temp and 210 Terex Wheelwater Loader
Best Value Portable Log
ItemPrentice ID: 13920 210E Contact: Austin Item ID: 8256 Ph: (888) 401-6367 Knuckleboom loader. Needs new x703 batteries and
off onto a conveyor. This is a very
Contact: JOE Item ID: JW-986495 with John Deere power unit with Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 OR 801-362-2170 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701
13916. Austin x703
‘95 John Deere C6 Tree Farmer
capacity!. Item ID 13421. Sam x702 Contact: JOE BARKO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric 801-362-2170 knuckleboom, 30' boom, 75hp
Ph: (888) 401-6367 x703
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
built processor. Item ID 13820. Johnwell Deere 648G Series III
Item ID: 160
Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703
CAT 525D
FOR SALE
John Deere 643K
‘93 Barko 180B
List seLL exchange buy save
motor, Rotobec continuous
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
Timberpro 735TL on injection pump. always started Item ID: 14279 good. in good working order. 22in
2011 timber pro 735B 11800 hours, 20" quadco hotsaw,
tracks/undercarriage 35% no leaks dry, nogreat. issues, everykohing head. head works day runner heat/air both work fire suppression system
new goal new swing turnerx702 all hard stuff redone oil Item IDdrive 13185. Sam change every 200 hours grease everyday
1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners 702-875-2703 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple. International 520B Item ID: Runs Great!. Item ID5838 13740. Sam
1981 Front End Loader. ONLY 2,600 hours. Tires are x702
like-new. Alternator is the only thing that was changed! 125hp engine. Been kept parked with very light use!
BELL
1990 Bell Super Contact: JOE T - This Bell has aEmail: brandJoe@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny 801-362-2170 ❘
LumbermensCO.com
** CALENDAR** CAT 928G
Item ID: 6056
2007 model with 5400 hours, comes with log forks,
& 4STATE in 1 bucket. NY WOODSMEN'S FIELD DAYS Fri, 18AUSTIN August - Sun, 20 August Contact: Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029
www.starwebhosting.net/woodsmen/
John Deere 548G3 The Tree that Started it All! Contact: AUSTIN
Item ID: 1977
Hot Springs, Arkansas www.arkloggers.com Contact: AUSTIN
This skidder has 4700 original hours and comes with a winch. Cab has heat & ac, tires are 23.1 26. In excellent condition!
Email: Austin@lumbermensco.com 72ND888-401-6367 ANNUAL GREAT LAKES Phone: EXT 703 OR LOGGING931-797-8029 & HEAVY EQUIPMENT EXPO
Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703 published 931-797-8029 a monthly circular
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
(2) 380 TIMBERJACK SKIDDERS
Item ID: 2803& BIOMASS MID-ATLANTIC LOGGING Fri, 15was Sept - Sat, 16butSept One skidder burnt halfway lots of extra
PUBLISHER
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
GMC LOG TRUCK Lexington, Kentucky
MARKETING Item ID: DIRECTOR 8720
Item ID: 5037
John Williams
http://www.kfia.org/ model with new 6 liter engine with KentuckyWoodExpo.aspx
2016 Complete sawmill package, includes precision chip (888) 401-6367 701Morgan pack, 80ft vibrating conveyer, HMCext. Debarker, Slab edger, 3j@lumbermens.co strand log deck, and more.
1995 60000 miles on it, good tires, has split 5 gear transmission.
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703 931-797-8029 EQUIPMENT REPS
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
Phone: 888-401-6367 EXT 703 OR 931-797-8029
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Hurdle #2 Sawmill
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
usable parts. Both are cableCarolina machines. Selma, North www.midatlantic-logging-biomass Contact: AUSTIN expo.com/ Email: Austin@lumbermensco.com
Contact: THEAUSTIN PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct EXT - Sun, 8931-797-8029 Oct Phone: 888-401-6367 703 OR
Cambridge, Ohio www.ohioforest.org
** INFO LINK**
Timberjack 380C
Danckaert Band Resaw - Roughly Item ID: 410 10 hours on this machine since it
95’ long frame model with JD winch. Skidder is in excel-
lent condition. has been rebuilt, it has a 24foot in
feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute has CLT presses. John also Deere 437C
Item ID 13876. x703 ItemAustin ID: 1020
model withBand 8500 hours, with a bucksaw, S2010 &W 125 Millcomes with has never had a delimber mounted on it and primarily
been used aroundgenerator a sawmill. Caterpillar - Low hours
on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367 931-797-8029 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN
Kilgore Saw ............................. 22
Universal Refiner ................... 23
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
Lignomat ................................. 24
- USED FORESTRY EQUIPMENT FOR SALE SALE ❘
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l Cell: www.BakerProducts.net 931-797-8029
SELL YOUR EQUIPMENT TODAY TODAY l§
800.S48.6914 I S73.663.7711
❘
24/7 SUPPORT 0 SUPPORT
❘ L! (888) 401-MENS 401-MENS
NO. 19
B U Y S
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
BANDMILLS & HEADSAWS
H O T
SOUTHWEST FOREST PRODUCTS EXPO Timberjack 230 Fri, 25 August - Sat, 26 August
Item ID: 985
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
Quadco 22B Hot Saw Head
“Precision Under Pressure”
Phone 315.284.4126 Item ID: 7750 Fax 315.849.2045 2012 model with very low hours, has only been Website used to cut softwood. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
‘16 Halverson H140 Skidsteer (DEMO)
VALMET 840.2 FORWARDER
B U Y S
Item ID: 9770
Sun 4ID:Bolster Log Trailer Item JW-909632 Item ID: 8256 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701
2005 model with 18000 frame hours, has new trunnion, & new rear bogie brakes installed last spring. Comes with 1 set of bear paws,1 set of ice chains, & 1 set of tracks.
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
‘93 Barko 180B
Item ID:Double 14077End Trim Saw Cornell Contact:Item Austin ID: 6307 Ph: (888) 401-6367 x703 1995 model with automatic setworks, variable speed feed & hydraulic conveyer.
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
Cat D5G with Winch
H O T
Item ID: 107
2002 model with 7000 hours. Has log arch & winch! Everything in the undercarriage was just replaced besides the rails and one front idler.
‘95 John Deere C6 Contact: AUSTIN Tree Farmer Email: Austin@lumbermensco.com Item ID: Phone: 888-401-6367 EXT 13920 703 OR 931-797-8029
Timberking 458 Forwarder Item ID: 171
Tigercat T240B Item ID: 4266
2005 model with 17,750 frame hours. Had new engine 13428 Ln. // and new super gripVictory grapple installed 1000 PO hours Box ago. Working daily
124 2006 model with 10,500 hours, has all new hoses, along Adams Center, NY 13606 with all repacked cylinders. In excellent condition. Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 931-797-8029
‘13 KMC 2500 Track Skidder
Contact: Austin Ph: (888) 401-6367 John Deere 648E x703
Item ID: 14078 1995 pin & Contact: Austin woods Ph: (888) 401-6367 x703
model in excellent condition, every bushing are new. Has not been in the capacity!. Item ID 13421. Sam x702 since having $20k worth of work done!
off onto a conveyor. This is a very
1996 John Deere 648G Sam x702 Item ID: 4894 Firewood Processor - This is
L O G G I N G
John Deere 1110E
‘83 John Deere Item ID: 14252 1400 original hours. 8 wheel, swiveling self leveling cab, 4850 clean straight blade, 360s heavy duty grapple, double extender 32' radial forestry tires, 1 set of Itemmakes ID:boom 14073 tracks, rated for 5 1/2 cords, 6 cylinder John Deere diesel Call for more pictures Contact: Austin
Comes with a winch, has new pins and bushings a Chomper 16 PDA in the grapple and main Model boom. Tires are size 28L
Ph: (888) 401-6367 x703 Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great.
1999 John Deere 648G
Item ID 13644. ItemSam ID: x702 8548
FIREWOOD PROCESSORS 11000 frame hours with new engine installed last year. Has New turbo as well.
2010 Shop Built Wood Processor AUSTIN - Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT30703 inch insert tooth circle saw, foot 931-797-8029 376 Issue 364
automatice Contact: AUSTIN
firewood processor
Email: Austin@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 703 OR 931-797-8029 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701
tach, oil pressure, water temp and
2000 Tigercat 845
amp Item gauges. logs up to 16”. ID:Cuts 4497
chain conveyer, 8 way splitter,This oncutter has One owner comes all saw 4689 originaland frame hours, with with New 20,000lb goose neck trailer. 13916. Austin x703
Best Value Portable Log
pump installed 300 hours ago. Good Uncercarraige. Cab Item manuals and receipts. Purchased has ID AC but no Heat.
new for $32,500. Item ID 13865.
Contact: AUSTIN Email: Austin@lumbermensco.com Splitter Sam x702 Phone: 888-401-6367 EXT 703 OR 931-797-8029
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
LOGGING EQUIPMENT BANDIT540D 1988 John Deere
1999 Bandit 1900 Tracked Disc Item ID: 727
Rebuilt motor 1000 hours ago, Under tight center section, noatslip 13HP Honda motor. Manual start Chipper - Cat Carriage
but electronic option is
transmission, good winch. Tires are 23.1 x 26 with chains available. all around. 50% or better. 475 hp Cummins
Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: AUSTIN adjustable to single two way.
Email: Austin@lumbermensco.com Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 703 OR 931-797-8029
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Sam x702
2004 Bandit Beast Model 4680 -
2008 Barko 495 ML
3412 Caterpillar Diesel engine Item ID: 7648 with 850 HP. 5300 hrs. in log deck. Has a hydraulic grapple, 11000 frame hours, and comes with csi Mill 264 Delimber. homemade processor with a 10’ chain and kicker that all
it is a tight and dry machine. runs Owner off statesgood condition. Just finished
10
Contact: AUSTIN Acre clearing job, ready to work! of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com
Remote control. Big931-797-8029 production unit. Has a 4’ chain saw that kicks Phone: 888-401-6367 EXT 703 OR
Lumbermens since 1986
❘
BARKO
Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 OR 931-797-8029
well built processor. Item ID 13820.
‘05 Gehl CTL 70
Item ID: 6603
List seLL exchange buy save
knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
Volvo L50D
good. in good order. 22in Itemworking ID: 14263
kohing head. head works great. 2008 Volvo L50D and 5000 hours, bucket and forks,
brand new quick connect, new starter, new battery, Item Sam x702cab heat/air, clean new acID that 13185. needs charged, enclosed
glass 50% tires, works real nice. Call for more pictures 1999 Barko 160D - new engine with Contact: MARK approximately 1500 hours. Hour Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 meter dont work. The last 2 owners 702-875-2703 have only used it to load trucks or
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
CAT 910C
Runs Great!. Item 13740. Sam Item ID:ID 14264
x702 910 Cat 1978 transmission rebuilt, new clutch 1k hours
ago, dry, runs good, windows clean, forks, good woods machine, rife and kane tires off a combine tread is 5-6 inches deep, new battery. Call for more pictures
BELL
1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and 702-875-2703 ❘
LumbermensCO.com
** CALENDAR**
2001 John Deere 435
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
Item ID: 7100
Loader is very tight and dry. It also comes with CTR
bucksaw. NY STATE WOODSMEN'S FIELD DAYS Fri, 18AUSTIN August - Sun, 20 August Contact: Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029
www.starwebhosting.net/woodsmen/
1996 Timberjack 460D Item ID: 14276
Hot Springs, Arkansas
1999 model with 8200 Hours, UC is about 80%, has 36” www.arkloggers.com pads. All filters were just changed, and cylinders repacked.
Escanaba, Michigan
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Lexington, Kentucky Item ID: 706 http://www.kfia.org/ Model with propac delimber, good KentuckyWoodExpo.aspx
2004 Machine has been well maintained.
is an extremely accurate machine in ve1y good condition, Cuts 130 feet John a minute also has CLT XLT presses. Deere 650K Item ID: 480 Item ID 13876. Austin x703 model withBand 4300 Hours, haswith forestry package, and S2013 &W 125 Mill
UC.
recently had new tracks, sprockets, idlers, and rollers
installed. Caterpillar generator - Low hours
on the mill,AUSTIN electronic computer Set Contact: Email: Austin@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.703 track Phone: 888-401-6367 931-797-8029 Cat 3406 140KW Genset, 12,400
Contact: THEAUSTIN PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct EXT - Sun, 8 931-797-8029 Oct Phone: 888-401-6367 703 OR
Contact:DESIGN MARK DIRECTOR Email: Mark@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 708 702-875-2703
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
is supported on both sides. This
John Deere 200CLC
MARKETING DIRECTOR
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
pressure guides. Top Casting wheel
Selma, North Carolina around 75% www.midatlantic-logging-biomass Contact: AUSTIN expo.com/ Email: Austin@lumbermensco.com
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
converted cable John skidder approx. 9500 hours completely Williams rebuilt motor less 300 hours ago new sleeves, pistons, (888) 401-6367 701new hybang bearings, rod bearings, heads ext. done, brand draulic pumpj@lumbermens.co around 300 hours ago Call for more pictures
POSTMASTER
it includes two sets of Mcdonough
Phone: 888-401-6367 EXT 703 OR 931-797-8029
Item ID: 14267
May be sent to morris@lumbermens.co
that go up and down, with airbags,
Item ID: 5109 MID-ATLANTIC LOGGING & BIOMASS 2009 model with forestry frame hours, Fri, 15 Sept -package, Sat, has 166000 Sept with new John Deere installed engine 3 months ago. UC is
Woods Publishing
AD SUBMISSIONS
machine, with air strain conveyers
John Deere 650J XLT
PUBLISHER
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
feed deck 20 foot out feed deck Contact: AUSTIN Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 931-797-8029 bells and whistles, its a production
Thurs, 7 Sept - Sat, 9 Sept
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
MAILING ADDRESS
2011 Model with around 8000 Hours, well maintained
and ready to work. has been rebuilt, it has a 24foot in
Contact: AUSTIN 72ND ANNUAL GREAT LAKES Email: Austin@lumbermensco.com LOGGING & HEAVY EXPO Phone: 888-401-6367 EXTEQUIPMENT 703 OR 931-797-8029
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT has 708 Since 1986, Lumbermens 702-875-2703 published a monthly circular
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co John Deere 548E
CATResaw 525C- Roughly Danckaert Band Item ID: 4091 10 hours on this machine since it
Innovative
CARRIAGES & DRIVES
2010 Cardinal HD Carriage
Carriages (Sawmill) - Cardinal Clean-Burn Design
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Carriage line it includes carriage
with onboard log turners, carriage drive, hyd pac for carriage,
Baker ...................................... 5, 7 Menominee Saw ..................... 29 Manufacturing a full line of biomass fired Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 combustion systems backed with fifty years of innovative clean-burn design. Diverse every Brute Force Mfg. ..................... 31 inMidwest Sharpening.............. 26 way with multi-fuel blending capability. Hurst Buckstokers Equipment ........ 36 Mor bark ..................................... 9 utilize (AIM) hundreds of common and abundant solid biomass fuels. Corley Mfg .............................. 32 Multitek ................................... 12 Large or small scale, project Piper's CRD Metalworks .................... 25 with management is eased the Saw Shop.................... 13 impressively short installation time CW Mill-ArmorHog .............. 17 Rotochopper............................ 40 required with prefabricated CW Mill-Hogzilla ................... 15 Row Electric ............................ 20 modular components. Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3 Rotary Dryers Hurst Boiler ............................. 14 Sand Dryers Grain Iron Dryers Bull ................................... 21 Lumber Kilns Kilgore Saw ............................. 22 Cement Kilns Brick Kilns................................. 24 Lignomat
The Paul Bunyan Show ......... 39
- USED FORESTRY EQUIPMENT FOR SALE
❘
sawyers cab, computer controls, cabinet with electronic drives for carriage knees, husk including 48" bottom saw and 36" top saw
STACKING RAC
Thomas Industrial Controls..... 10
50
Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23
www.BakerProducts.net YEARS 800.S48.6914 I S73.663.7711
WoodMizer ................................ l
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
❘
(888) 401-MENS L!
NO. 21
L O G G I N G
The Tree that Started it All! Contact: MARK
ADVERTISING SALES
BANDMILLS & HEADSAWS
SOUTHWESTTigercat FOREST PRODUCTS EXPO 845 Fri, 25 August Sat, 26 August Item ID: 8139
14,000 hours 3 brand new tires 1 at 40% big winch, motor redone 800 hours ago, new water pump 2 years ago, valves redone last week small oil and hydraulic drip very minor out of control valves, a few cylinoids replaced great working machine Call for more pictures
07 Prentice 950B
“Precision Under Pressure”
Phone 315.284.4126 Item ID: 5368 Fax 315.849.2045 3000 Original hours and has a new set of 30.5 Website Goodyear tires. www.empirehyd.com Email Contact: AUSTIN info@empirehyd.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Prentice 210E Item ID: 14222
‘16 Halverson H140 good tight machine turntable is tight cummings engine easy on fuel doesn’t burn any oil new water pump on it normal maintenance 2nd(DEMO) owner glass good new seat Skidsteer cover nice never ran a delimber hour meter says 5400
'01 Gyro Tract GT13 Item ID: 14116
true hoursID: are between 7000 and 7500 quick connect Item JW-909632 csi 4400 12’ table joystick controls delimber attachment Contact: J Williams Contact: Ph: (888)MARK 401-6367 x701
Comes with Miller Stump Grinder. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
‘93 Barko 180B
Deere 160D ItemJohn ID: 14077 Item ID: 6965 Contact: Austin 2010 Model with less than 2000 Hoursx703 on it. Comes with Ph: (888) 401-6367 Ryan’s DS28 processing head and bucket. Good undercarriage and good machine.
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029
96’ Hydro ax 611E Item ID: 4654
‘95 John Deere C6 Tree Farmer
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
‘13 KMC 2500544B Track John Deere Item ID: 14230 Skidder
L O G G I N G
01’ Timberjack 460D Item ID: 345
runs good, sometimes needs starting fluid to crank, steering cylinder packing, good tires good breaks, Item ID: needs 14078 good transmission, dry, tight, doesn’t burn oil, unsure Contact: Austin on hours one tire brand new the rest 60-70%
13428 Victory Ln. // PO Box 124 Contact: AUSTIN Adams Center, NY 13606 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029
Ph: (888) 401-6367 x703
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703 off onto a conveyor. This is a very
1990’s John Deere 590C buckets needs bushing brand new tracks needs muffler gravel pit John Deere 590c good machine no slack in table no slack in boom
‘05 Gehl CTL 70
Contact: MARK Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 708 or 702-875-2703 Contact: JEXT Williams
Ph: (888) 401-6367 x701 Item ID: 14236
chain 8 way 2014 John Deere 843K conveyer, 34x26 tires 70-80% runs assplitter, should lowon hour, Item ID: 14073 JD 22B head 20,000lb goose neck trailer. Item ID Contact: Austin Contact: MARK 13916. Austin x703 Ph: (888) 401-6367 x703Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 Best Value Portable Log Splitter
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
John Deere 544B
Item ID: 14230 in excellent condition. Runs great. Item ID 13644. runs good, sometimesSam needs x702 starting
fluid to crank, steering cylinder needs packing, good tires good breaks, good transmission, dry, tight, doesn’t burn oil, unsure on hours one tire brand new the rest 60-70%
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30708 inch insert tooth circle saw, foot 702-875-2703 376 Issue 364
Firewood Processor - This is a Chomper Model 16 PDA
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
amp gauges. Cuts logs up to 16”.
homemade processor with a 10’
approximately 1500 hours. Hour new for $32,500. Item ID 13865. Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Sam x702 888-401-6367 EXT 708 or 702-875-2703 only used it to load trucks or LOGGING EQUIPMENT Phone: have
BANDIT648L ‘15 John Deere
Item ID: 14237 1999 Bandit 1900 Tracked Disc
Sam x702
2004 Bandit Beast 595 Model 4680 ‘14 Barko Item ID: 14238 3412 Caterpillar Diesel engine
2014 Barko 595 ML Magnum+ CSI 5300 264 Delimber CSI 4400 with 850 HP. hrs. 18’ Mill in ground log deck. Has a hydraulic grapple, saw 1402 hours, plated lines, hyrdraulic legs, tight, dry, runs as should, ready to work,good on pits trailer, cat kodiak grapple off condition. Just finished 10
Acre clearing job, ready to work! of a 4 cylinder Mercedes power Contact: MARK Email: Mark@lumbermensco.com control. Bigorproduction unit. Has a 4’ chain saw that kicks Phone: Remote 888-401-6367 EXT 708 702-875-2703
Lumbermens since 1986
❘
Item ID:head 14232 kohing head. works great.
hours a only 300 hours in the last year 65% tracks under sprockets 1999 Barko 160D - new engine with manuals and receipts. Purchased rollers good, everything works as it should. Call for more info
but electronic option is available. 50% or better. 475 hp Cummins Contact: MARK Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 or 702-875-2703 adjustable to single two way. Great Well maintained. Item ID 13294. Firewood Processor - This is a
good. in good working order. 22in ‘11 John Deere 753J
John Deere 753J ID Hot saw processor tracked feller buncher, reguItem 13185. Sam x702 One owner and comes with all2011 lar maintenance, owners manuals as well as mainatance records 7441
runs as should ready to go, dual arch, good winch
Value! PA. Item ID 12062. Sam x702
Item ID: 52342 (excellent condition.). Item ID
1995 Barko 775 B Feller Buncher automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com - Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 707 on injection pump. always started low hours. Control panel includes
2015 John Deere 648L 44” tires 2267 hours 85-90% dry, tight, lowathour, 13HP Honda motor. Manual start Chipper - Cat Under Carriage
chain and kicker that all runs
Contact: MARK BARKO Email: Mark@lumbermensco.com 1994 Barko 160B - ElectricEXT 708 Phone: 888-401-6367 702-875-2703 knuckleboom, 30' boom, 75hp
2011 model portable loader, has 8,631 hours on it. 13238. Chris x700 Woods ready.
tach, oil pressure, water temp and
‘14 John Deere 843K
condition. Easily produces high
Item ID: 14225
2006 CTR 450 delimber, good working condition. Selling only because using bucksaw instead Sam x702 capacity!. Item ID 13421.
grapple, 5,000 original hours. Knuckle Boom Loader
Sam x702
Item ID: 14233
with 1700 hours, in very good
CTR 450 Delimber
motor, Rotobec continuous well built processor. Item ID 13820. 2011 437D John Deere
‘90 John Deere 590C
‘83 John Deere 4850
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
List seLL exchange buy save
as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple. ‘14 Case CX210C Item ID: 14239 Runs Great!. Item ID 13740. Sam
2014 Case CX210C bought 2015 grinding head 150
x702 hours has hi-flo hydraulic thumb 36” inch bucket 1100 ripper tooth 99% tracks undercarriage 2 new rollers, very dry, back up camera heat/ac radio excellent machine
BELL
1990 Bell Super T - This Bell has MARK aContact: brandMark@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 708 control, 33” bar, pump and 702-875-2703 ❘
LumbermensCO.com
** CALENDAR** Timberjack 207
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at '06 John Deere 700J www.LumberMB\ISmagazine.com Item ID: 14194
Item ID: 14144
Out of frame rebuilt engine, out of frame rebuilt transmission, rebuilt reverse box. Runs great, paper work NYdocumenting STATE WOODSMEN'S FIELD DAYS all work done.
Fri, 18 August - Sun, 20 August
Contact: MARK Boonville, New York Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703 www.starwebhosting.net/woodsmen/
Cat 525
Hot Springs, Arkansas 2nd owner around 8000 hours, call for more info www.arkloggers.com
it All! Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has 702-875-2703 published a monthly circular
Thurs, 7 Sept - Sat, 9 Sept
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Escanaba, Michigan
Woods Publishing MID-ATLANTIC
LOGGING & BIOMASS EXPO
that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel
Selma, North Carolina Contact: AUSTIN Email: Austin@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 703 expo.com/
is supported on both sides. This is an extremely accurate machine
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
in ve1y good condition, 2432 Cuts 130 ‘07 Prentice Item ID: 14241 feet a minute also has CLT presses.
Item ID: 14187 http://www.kfia.org/
Sslack &W 125w/winch Band30.5 Mill with no leaks 32 tires 75% good working
'04 John Deere 700H Lexington, Kentucky
MARKETING DIRECTOR John Williams 2004 CAT 525B (888) 401-6367 ext. 701 Item ID: 14204 j@lumbermens.co
2007 2432 prentice grapple skidder- 14000 hours motor Item IDhours 13876. Austin x703 has 4200 crate motor new trans new back glass
real tight 1200 hours on center pins cradle has just little
KentuckyWoodExpo.aspx
machine Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400
Contact: AUSTIN Email: Austin@lumbermensco.com THE888-401-6367 PAUL BUNYAN SHOW Phone: EXT 703
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703
Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
machine, with air strain conveyers
'93 John Deere&548E MID-ATLANTIC LOGGING BIOMASS Item ID: 14184 Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the 702-875-2703 bells and whistles, its a production
Contact: MARK 72ND ANNUAL GREAT LAKES Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 LOGGING & HEAVY EQUIPMENT EXPO 702-875-2703
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 23
L O G G I N G
Cat 525 3304The engine, tires 65%, 13929 Tree hours brand new Started hydraulic pump. that
ADVERTISING SALES
BANDMILLS & HEADSAWS
dry tight everything on sprockets roller idlers chains all tracks and undercarriage is 1 year old and 90% w/winch, winchBand has reverse 6-way- Roughly blade screens Danckaert Resaw and ropes open cab taken good care of 4900.7 hours. 10 hours on this machine since it
'03FOREST 670 Hydro-Ax SOUTHWEST PRODUCTS EXPO Item-ID: 14138 Fri, 25 August Sat, 26 August
Item ID: 14155
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
'97 Hydro AX-411 EX Bar Saw Head
‘16 Halverson H140 Skidsteer (DEMO) 04’ TimberKing 540DS
Item ID: 98754
Heat works. Air needs charging. Tires inc., great shape tires chains to go with it bear claws. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
2011 CAT 525C
Item ID: JW-909632 Item ID: 14205 Contact: J Williams Contact: Ph: (888)AUSTIN 401-6367 x701
Item ID: 14203
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘93 Barko 180B
Item ID: 14077 Contact: Austin Prentice Ph: 98’ (888) 401-6367410E x703 Item ID: 14206
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘02 Prentice 490 Item ID: 14047
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
L O G G I N G
‘13 KMC 2500 Track Skidder
‘89 Timberjack 380A
Item ID:ID: 14078 Item 14039 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
51813428 CAT Grapple Victory Ln.Skidder // PO Box 124
Item ID: 14036NY 13606 Adams Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
off onto a conveyor. This is a very
well built processor. Item ID 13820.
John Deere Cab
Sam x702 Item ID: 6679
‘05 Gehl CTL 70
Firewood - This AC, FD 55 Cutting Processor Head, 70% TiresisVery Good Condition, 3500 Hours. a Chomper Model 16 PDA firewood processor Contact:automatice SAM
Email: Sam@lumbermensco.com Item ID: JW-986495 with John Deere power unit with Phone: 888-401-6367 EXT 702 Contact: J Williams low hours. Control panel includes Ph: (888) 401-6367 x701
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
Mid 90’s Husky Brute 335XL
ID:13421. 14088Sam x702 capacity!.Item Item ID
BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
Caterpillar
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good
lbs, HP,and New Firestone chain conveyer, 8 way splitter,17,000 on One100 owner comes with all23 x 126, Power Shift New Hyd Pump, New 20,000lb goose neck trailer. Item ID Shaft, manuals receipts. Purchased Winch Newand Hyd Park Brake. 13916. Austin x703 for $32,500. Item ID 13865. Contact:new SAM Email: Sam@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 702 - Small manufacturer in PA has LOGGING EQUIPMENT
on injection pump. always started Item ID: 2476 good. in good working order. 22in Product no. 4194, Cab with cold AC, kohing head. head SH56 Bunching Head,works 28L-26great. Tires At 60%, Center Tight, Runs Great, Machine Item ID 13185. Sam x702 Has New Injectors, New Fan Motors, 1999 BarkoOn 160D - new engine And Clutch AC, 11,111 Hours. with approximately Contact: SAM1500 hours. Hour Email:dont Sam@lumbermensco.com meter work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
delimber, grapple has been rebuilt.
‘83 John Deere 4850
‘00ID: Timberjack 1110 Item 14073 Item ID: 14033 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN
condition. Easily produces high
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
Johncondition. Deere Runs 540B in excellent great.
Item ID: 0908 Item ID 13644. Sam x702 All FIREWOOD Refurbished!PROCESSORS 4K Original Hours! 2010 Shop Built Wood Processor SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 376 Issue 364
tach, oil Deere pressure, 540D water temp and John Item ID: 5613 amp gauges. Cuts logs up to 16”.
made the best valued log splitter. John
BANDIT Deere 437D Log Loader Item ID: 8834 1999 Bandit 1900 Tracked Disc
13HP Honda motor. Manual start - Cat Under Carriage Product Chipper No. 4204, Extra Clean, 10K at Hours, Stock Photo Delimber but electronic option is available. 50% or better. 475 hp Cummins Contact:Diesel. SAM 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Email: Sam@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 702 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a
homemade processor with a 10’‘14 log deck. Has a hydraulic grapple,
2004 Bandit Beast Model 4680 -
3412 Caterpillar Diesel Loader engine Komatsu WA200 ID:5300 14010 with Item 850 HP. hrs. Mill in
Contact:good AUSTIN chain and kicker that all runs off condition. Just finished 10 Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
List seLL exchange buy save
as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
96’ John BELL Deere 643D
Item ID: 14207 1990 Bell Super T - This Bell has Contact: AUSTIN a brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 703 ❘
LumbermensCO.com
** CALENDAR** Case 85XT Skid Steer Item ID: 14149
Open Cab, Top Fork And Bucket Attachments. 95% Front Tires 60-70% Rear Tires.
NY STATE WOODSMEN'S FIELD DAYS Contact: MARK Fri, 18 August - Sun, 20 August Email: Mark@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 708 702-875-2703 www.starwebhosting.net/woodsmen/
FORESTBoom PRODUCTS EXPO '96 410D SOUTHWEST Prentice Knuckle
The Tree Excellent Condition. One owner machine comes with a bucket that and forksStarted currently has around 3000 hours. it All!
Hot Springs, Arkansas Turntable is real loose, needs bearings and hydraulic is seized up, 6 cylinder John Deere diesel. parts or fixer. Parts in good shape! www.arkloggers.com
Item ID: 14145
Fri, ID: 25 14151 August Item
Contact: 72NDMARK ANNUAL GREAT LAKES Email: Mark@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 708 OR 702-875-2703
Contact: MARK Email: Mark@lumbermensco.com Phone: EXT 708 Since 888-401-6367 1986, Lumbermens 702-875-2703
has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
'15 CAT 521B Reduced Price MID-ATLANTIC LOGGING & BIOMASS Item-ID: 14150 Fri, 15 Sept Sat, 16 Sept
PUBLISHER
Woods Publishing
ADVERTISING SALES
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Less than 300 hours of use! Carolina Brand new. Tracks at Selma, North 99% excellent track cutter. www.midatlantic-logging-biomass Contact: MARK expo.com/ Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 OR 702-875-2703
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat,D6C 16 Sept '72 CAT
MARKETING DIRECTOR International TD15 John Williams Bull Dozer
Lexington, Kentucky Item ID: 14152 http://www.kfia.org/ Good winch with arch, straight blade, around 10k hours KentuckyWoodExpo.aspx turns fine undercarriage 50-60% good rollers,
(888) 401-6367 ext. 701 Item ID: 14208 j@lumbermens.co
cab all screened, tilt blade complete logging setup
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703
Contact: THEMARK PAUL BUNYAN SHOW Email: Mark@lumbermensco.com Phone: 888-401-6367 708 OR Fri, 6 Oct EXT - Sun, 8 702-875-2703 Oct
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
- Sat, 26 August
'90 Valmet 544H
BANDMILLS & 14146 HEADSAWS Item ID: Danckaert Resaw - Roughly motor runs Band excellent, comes with 40%
chains, used just a couple months ago to
10 thishours, machine it cut hours trees. on 10-12k front since tires 60-70%
rear 90% turbo is lagging. Harvesting head
has been up. rebuilt, it has 24foot in is messed A couple leaks anot too serious feed deckMARK 20 foot out feed deck Contact: Email: Mark@lumbermensco.com
with 44888-401-6367 inch wheels, and Phone: EXT 708all the 702-875-2703
bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough
pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine
Danzco Delimber inPT20H ve1y good condition, Cuts 130 Item ID: 14134 feet a minute also has CLT presses. Excellent condition, motorx703 rebuilt about Item ID 13876. Austin 300 hours ago less than 2700 original Shours & W 125 Band Mill with Caterpillar generator - Low hours Contact: MARK on the mill, electronic computer Set Email: Mark@lumbermensco.com Phone:1/2" 888-401-6367 works,1 or 2" band,EXT 22ft.708 track 702-875-2703 Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
n se us lls a cl ro e " nk t h ard 2010 Cardinal HD iCarriage e d r a an t Carriages (Sawmill) -"sCardinal
CARRIAGES & DRIVES
Carriage line it includes carriage Designed to Meet Your
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric Austin ............................ 20 Contact:
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
Dyna Products ........................ 35 Empire Hydraulics ................... 8 Great Lakes Mfg. .................... 34 Hahn Machinery ...................... 3 Hurst Boiler ............................. 14 Iron Bull ................................... 21 Kilgore Saw ............................. 22 Lignomat ................................. 24
- USED FORESTRY EQUIPMENT FOR SALE
❘
Crosstable Lumber Grade Printer
‘05 Tigercat 230B Item ID: 13911
with onboard log turners, carriage Mill's Requirements drive, hyd pac for carriage,
Custom
sawyers cab, computer controls, Inkroll
Sizes in 8 Different 48" bottom saw and 36" top saw Colors!
STACKING RAC
Panel Printer
‘97 Prentice 210E
Item# 13795 Contact: Sam Ph: (888) 401-6367 x702
Ph: (888) 401-6367 x703 11 Sawmill Exchange .................. 4 o Lumber Mill Grade Printers Select Sawmill ......................... 19 Pallet Printer 2006 Logosol - This is a 10” yea 0 Planer o Panel Mill Grade Printers se rs /stripe Marker 4 sided rplaner that has removable Smith Sawmill ........................... v o Laminated Beam Printers 4 th ing e l ucutters that will take up to side o Wet & INKShow Roll......... Systems The PaulINK Bunyan 39 ind mbe us r and includes a blower o Edge/ Dual Edge Printers 12” lumber t ry Thomas Industrial Controls ..... 10 o Stripe Markers and Stud Printers system. Item ID 13428. Sam x702 o Hand Stampers and Hammers Union Grove Saw & Knife .. 2, 37 POLE & POST PEELERS o Custom Designed Marking Systems Universal Refiner ................... Email 23 PS8 Post Peeler - This peeler has : sales@claussenallmark.com Available Upon Request. Visit : www.claussenallmark.com www.BakerProducts.net WoodMizer ................................ l been converted to electricity over Call : 1-800-252-2736 800.S48.6914 I S73.663.7711 hydraulic. Comes with a operators
‘99 Hydro-Ax 511EX
ID: ❘13799 SELL YOUR EQUIPMENTItem TODAY 24/7 SUPPORT l§ 0 Contact: Sam Ph: (888) 401-6367 x702
L O G G I N G
'13 Komatsu WA200 PZ Wheel Loader
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
boxes, conveyor and ❘ cab, electric (888) 401-MENS NO. 25 L!
kickers and will peel a 3” post to a
Cro Gra
“Precision Under Pressure”
Item ID: 0998
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
One Owner, With Less Than 4K Hours. Excellent Undercarriage, Joystick Controls. Everything Working On It. Best Bell For The Price. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘16 Halverson H140 '96 CAT 515 Log Skidder
John Deere 753J
Item ID: 7534
Skidsteer (DEMO)
Item ID: 14258
REDUCED PRICE! Single Arch Glass Cab, 28L X 26 Item ID: JW-909632 Tires 50/40%, New Bear Paws On Front, Ice Chains Rear, Esco 84’ Grapple, New Cutting Edge On Blade, Contact: J Williams All Cylinders Just Rebuilt, 12,800 Hrs.
2013 John Deere 753J with Quadco 360 hotsaw head 3,215 hours. Everything runs and works as it should
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Ph: (888) 401-6367 x701
Contact: SAM • Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: ‘80 (888) 401-6367 John Deerex703 550 Item ID: 14037
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
'07 John Deere 848H Grapple Skidder Item ID: 6566
Product No. 1876, 11,066 Frame Hours, New Engine At 8,800 Hours, Dual Arch Winch, Chains On All Four Tires, Working Daily In Woods. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
L O G G I N G
‘13 KMC 2500 Track Skidder
‘14 B66TD Rotochopper
Item ID: ID: 14078 Item 13838 Contact: Austin Contact:Ph: SAM (888) 401-6367 x703
12’ JohnVictory Deere 437D 13428 Ln. // PO Box 124
Item ID: 14209 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
SamItem x702 ID: 7698
grapple, 5,000 original hours.
‘05 Gehl CTL 70
10’ John Deere 648H
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws Franklin 2005 Q70 Item ID: 5579 in excellent condition. Runs great.
Item 13644.New SamRubber, x702 Heat/ LowID Hours! ACFIREWOOD Takes No Oil. Great Running PROCESSORS Skidder. 2010 Shop Built Wood Processor
SAM - Contact: It has a 353 Detroit diesel, 40 Email: Sam@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 702 376 Issue 364
Item ID: JW-986495 Contact: SAMwith • Email: JohnSam@lumbermensco.com Deere power unit with EXT 702 Contact: J Williams Phone: 888-401-6367 low hours. Control panel includes Ph: (888) 401-6367 x701 tach,980C oil pressure, water temp and '80 CAT Loader amp gauges. logs up to 16”. Item ID:Cuts 14133
chain conveyer, 8 way splitter,All onmaintenance Onerecords owner and comes with tight machine 1980 980Call cat loader forks and a bucket tires 60-70% spare parts included.
20,000lb goose neck trailer. Item ID
manuals and receipts. Purchased
Contact: MARK new for $32,500. Item ID 13865. Email: Mark@lumbermensco.com Phone: 888-401-6367 Best Value Portable Log Splitter Sam x702 EXT 708 702-875-2703
13916. Austin x703
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
LOGGING EQUIPMENT BANDIT '92 CAT 518
Item ID: 14198 1999 Bandit 1900 Tracked Disc
1992 CAT 518 6000 original frame hours! Carriage Rebuilt motor 13HP Honda motor. Manual start Chipper - Cat Under atand transmission with less than 1000 hours, excellent winch, great machine. Callor forbetter. video 475 hp Cummins but electronic option is available. 50%
Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Contact: MARK Email: Mark@lumbermensco.com adjustable to single two way. Great Well maintained. Item ID 13294. Phone: 888-401-6367 EXT 708 or 702-875-2703 Value! PA. Item ID 12062. Sam x702 Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple,
2004 Bandit Beast Model 4680 3412 engine ‘97Caterpillar TimbcoDiesel 425D ID:5300 13950 with Item 850 HP. hrs. Mill in
chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
‘05 Timberjack 608B
ID:13421. 13898Sam x702 capacity!.Item Item ID
off onto a conveyor. This is a very
Firewood - This Product No. 1707, 3304 CATProcessor Engine 1-1/2 Yearsis Old, New Oil Cooler, Rebuilt Radiator, New Injector Pump, New a Chomper Model 16 PDA Hydraulic Pump, New Main Lines, New Arch, New Blade Plate, Good Air Brakes. automatice firewood processor
Item ID: 14073 Item ID: 14210 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
Contact: SAM BARKO Email: Sam@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 702 knuckleboom, 30' boom, 75hp
Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
well built processor. Item ID 13820. '94 CAT 518C Cable Skidder
‘83 John Deere 4850
‘95 John Deere C6 Tree Farmer
List seLL exchange buy save
motor, Rotobec continuous
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great.
Item ID 13185. Sam x702 ‘06 CAT 517 Item ID: 13869 1999 Barko 160D - new engine with
Contact: SAM1500 hours. Hour approximately Email: Sam@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 702 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
John 648D Grapple Skidder
Runs Great!. Item 13740. Sam Item ID:ID 14265
3 tires at 65% 1 at 25% runs great, good engine, new x702
pump on front, new valve bank, cylinders redone, big winch, grapple is tight, center pins are okay, will need to be replaced down the road it's a 4th spare machine. Call forBell more pictures 1990 Super T - This Bell has
BELL
MARK aContact: brand new Duetz engine. Lever Email: Mark@lumbermensco.com
Phone: 888-401-6367 EXT 708 control, 33” bar, pump and tranny 702-875-2703
❘
LumbermensCO.com
** CALENDAR**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
93’ Prentice 210 Item ID: 14216
AUSTIN NYContact: STATE WOODSMEN'S FIELD DAYS Email: Austin@lumbermensco.com Fri, 18 August - Sun, 20 August Phone: 888-401-6367 EXT 703
Boonville, New York www.starwebhosting.net/woodsmen/
DanckaertItem BandID: Resaw - Roughly 14170 10 hours on this machine since it 85% Undercarriage. has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 703 bells and whistles, its a production
Item ID:Arkansas 14217 Hot Springs, www.arkloggers.com Contact: AUSTIN
Item 14211 thatID: Started
it All! Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens Phone: 888-401-6367 EXT has 703
Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703
LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept
published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
Escanaba, Michigan
machine, with air strain conveyers
07’ Tigercat MID-ATLANTIC LOGGING724E & BIOMASS Item ID: 14218 Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
2004 Timbco 445EXL
MID-ATLANTIC
LOGGING & BIOMASS EXPO
that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel
Contact: AUSTIN Selma, North Carolina Email: Austin@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 703 expo.com/
is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 W Sept Sat, 16Loader Sept Case 11 -Wheel
MARKETING DIRECTOR
feet a minute also has CLT presses.
Item IDJohn 13876.Deere Austin648G x703 Item ID: 14179 S & W 125 Band Mill with
Lexington, Kentucky Item ID: 14178 http://www.kfia.org/ new motor around 200 hours, rebuilt transmission around 500 hours, with bucket and forks, quick KentuckyWoodExpo.aspx
12’ John JohnDeere Williams843K Item ID: 14212 (888) 401-6367 ext. 701 j@lumbermens.co
Good winch, brand new batteries, pulled
Caterpillar generator Low hours logs last weekend. Call - for more info
attach setup, all cylinders redone last summer, fully enclosed cab
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703
on the mill, electronic computer Set Contact: MARK
THEMARK PAUL BUNYAN SHOW Contact: Email: Mark@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct Phone: 888-401-6367 EXT 708 OR 702-875-2703
Email: Mark@lumbermensco.com
works,1 1/2" or 2" EXT band, Phone: 888-401-6367 708 22ft. track 702-875-2703
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36 CRD Metalworks .................... 25
• 83 HP Turbo Charged Kubota Carriage line it includes carriage M&F Gauge•............................. 28 48” Carbide Insert Circular Saw carriage with onboard log turners, Meadows Mill, . ................ 33 Motion • Inc Vertical Saw –pac reduces drive, hyd for carriage, Menominee Sawrocking ..................... 29 frame and stress sawyers cab, computer controls, cabinet with electronic drives for Metal Detector's Inc. .............. 30 • Powered Hourglass Infeed Rolls carriagewith knees, husk Midwest Sharpening .............. 26 • Triple Multi-Wedge 4, 6,including and 48" bottom saw and 36" top saw Morbark ..................................... 9 splitting 8 or 10 way • Auto-Splitter with 3.8 second Multitek ................................... 12 cycle time13 Piper's Saw Shop ....................
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
MAILING ADDRESS
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
B & B Mfg. ............................... 18 B. H. Payne .............................. 16 Baker ...................................... 5, 7 Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31 Corley Mfg .............................. 32
STACKING RAC
www.BakerProducts.net Lignomat ................................. 24 WoodMizer ................................ l Built-Rite Mfg · 750 East Hill Road, Ludlow, VT 05149 · 800-757-2520 · info@built-rite.com 800.S48.6914 I S73.663.7711
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
❘
(888) 401-MENS L!
NO. 27
L O G G I N G
16’The CATTree 545D
ADVERTISING SALES
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Fri, 2011 25 August Sat, 26 August John- Deere 648H
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘97 Timberjack 240D Item ID: 13917
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
CAT 525 Cable Skidder
‘16 Halverson H140 ‘93 John Deere 548E Skidsteer (DEMO) Item ID: 14083
Item ID: 14266
1997 CAT 525 9300 20% real tight center pins, dry no leaks, good shape, motor redone less than 1000 hours ago, transmission good, new cable, needs tires. Call for more pictures
Item ID: JW-909632
Contact:Contact: AUSTIN J Williams Email: Austin@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 703
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
‘93 Barko 180B
Item ID: 14077 Contact: Austin Ph: (888) 401-6367845C x703 ‘11 Tigercat Item ID: 13927
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘94 Caterpillar 320 Item ID: 13936
L O G G I N G
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder 2012 Cat D6K XL
Item ID: ID: 14078 Item 14169 Contact: Austin Contact:Ph: AUSTIN (888) 401-6367 x703
‘11 Tigercat 620D 13428 Victory Ln. // PO Box 124 Item ID: 13929 Adams Center, NY 13606 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
off onto a conveyor. This is a very
well built processor. Item ID 13820.
Sam611 x702Ex-Hydro Ax ‘98
Firewood ItemProcessor ID: 13948- This is
‘05 Gehl CTL 70
‘83 John Deere 4850
‘1414073 CAT 535C Item ID: Item ID: 13840 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703
Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 with 1700 hours, in very good condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
PROCESSORS ‘04FIREWOOD John Deere 648G III
13878 2010 ShopItem BuiltID: Wood Processor
AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 376 Issue 364
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
a Chomper Contact: AUSTIN Model 16 PDA Email: Austin@lumbermensco.com automatice firewood processor Phone: 888-401-6367 EXT 703 with John Deere power unit with
low hours. Control panel includes tach, oil pressure, water temp and
‘99 EX ampHydro-Ax gauges. Cuts 511 logs up to 16”. Item ID: One owner and13799 comes with all
chain conveyer, 8 way splitter, on
Contact: SAM and receipts. Purchased 20,000lb goose neck trailer. Item ID manuals Email: Sam@lumbermensco.com 13916. Austin x703 new for $32,500. Item ID 13865. Phone: 888-401-6367 EXT 702 Best Value Portable Log Splitter Sam x702
LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 ‘05 TigercatTracked 230B Disc
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
Item ID: Under 13911Carriage at Chipper - Cat
13HP Honda motor. Manual start
but electronic option is available. or better. 475 hp Cummins Contact:50% AUSTIN Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple,
Sam x702
2004 Bandit Beast Model 4680 -
Caterpillar Diesel engine 90's3412 Model Timberjack 240A ID:5300 14111 with Item 850 HP. hrs. Mill in
chain and kicker that all runs off condition. Just finished 10 Contact:good WALKER
Email: Walker@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 Remote control.EXT Big707 production unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
List seLL exchange buy save
‘95 John Deere C6 Tree Farmer Item 13920 '98 ID: Timberjack 460 Contact: Austin Item ID: 14197 Ph: (888) 401-6367 x703
1998-Timberjack 460 grapple skidder comes with set of long axles 11500 hours strong winch tight, dry machine, tires 50% call for video!
capacity!. Item ID 13421. Sam x702 Contact: MARK BARKO Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric 702-875-2703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
good. in good working order. 22in kohing head. head works great.
Item ID‘89 13185. x702 CATSam D4H LGP Item ID: 13999 1999 Barko 160D - new engine with
Contact: AUSTIN approximately 1500 hours. Hour Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
‘03 John Deere BELL 748GIII
Item ID: 13851 1990 Bell Super T - This Bell has SAM aContact: brand new Duetz engine. Lever Email: Sam@lumbermensco.com control, bar, pump and Phone:33” 888-401-6367 EXTtranny 702 ❘
LumbermensCO.com
** CALENDAR**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August
'11 John Deere 85D Item ID: 14158
Boonville, New York www.starwebhosting.net/woodsmen/
wasn’t purchased or used until 2015 was a “leftover” under 1k hours, 8’ wide blade, backhoe, 3 buckets 24”, 30”, 36” one owner longer boom! The Tree LIKE NEW
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August Prentice 384 with
Danckaert Band - Roughly hours ago, rebuilt fuel Resaw injector, hydraulic rebuilt,
Contact: AUSTIN 72NDContact: ANNUALAUSTIN GREAT LAKES Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703
has been rebuilt, it has a 24foot in Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com Phone: 888-401-6367 708 with 44 inch wheels, andEXT all the 702-875-2703 bells and whistles, its a production
Phone: 888-401-6367 EXT 708 Since 1986, Lumbermens has 702-875-2703
published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
06’ Franklin Q80
Escanaba, Michigan
machine, with air strain conveyers
‘05 Transport Trailers Custom Log Pup MID-ATLANTIC LOGGING & BIOMASS Item ID: JW-538174 Fri, 15 Sept - Sat, 16 Sept MID-ATLANTIC
LOGGING & BIOMASS EXPO
that go up and down, with airbags, it includes two sets of Mcdonough
Contact: SAM North Carolina Selma, Email: Sam@lumbermensco.com www.midatlantic-logging-biomass Phone: 888-401-6367 EXT 7021 expo.com/
pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept '92 CAT 518C Cable Skidder
MARKETING DIRECTOR '94 John Deere 548E
feet a minute also has CLT presses.
'01 John Deere 648G3
Lexington, Kentucky Item ID: 14107 http://www.kfia.org/ HardKentuckyWoodExpo.aspx to Find “C” model in great shape!
JohnID: Williams Item 14185 (888) 401-6367 ext. 701 Contact: AUSTIN j@lumbermens.co
Email: Austin@lumbermensco.com DIRECTOR Phone:DESIGN 888-401-6367 EXT 703
Item ID 13876. x703 ItemAustin ID: 90899
S & W 125 Band Mill with Excellent Condition Low Price! Caterpillar generator - Low hours Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band,EXT 22ft.702 track Phone: 888-401-6367 Cat 3406 140KW Genset, 12,400
Contact: AUSTIN THE PAUL BUNYAN SHOW Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 703 Oct Phone: 888-401-6367 EXT
Donna Heninger
Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
grapple rebuilt, w/winch single arch tight ma10 hours on this machine since it chine 60% rear 40% front 28l's
Thurs, 7 Sept - Sat, 9 Sept
Woods Publishing Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
new main drive shaft, motor rebuilt 200 or so
HotBucksaw Springs, Arkansas & Delimber www.arkloggers.com Item ID: 14213
Item ID: 14214
PUBLISHER
ADVERTISING SALES
Item ID: 14199
BANDMILLS & HEADSAWS
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
ItemSaw ID: Shop 13869 Piper's .................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper ............................ Ph: (888) 401-6367 x70240
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE
❘
with onboard log turners, carriage drive, hyd pac for carriage,
‘14 Hurdle 3-Hd carriage knees, husk including Block Sawmill
48"Item bottom and 36" top saw ID:saw 13997
Contact: Austin Ph: (888) 401-6367 x703
2006 CAT 517
STACKING RAC
Contact: Sam
‘14 Komatsu WA200 ❘ 24/7 SUPPORT 0 Loader
SELL YOUR EQUIPMENT TODAY l§
One Owner, low hours!
Firewood Proc.
Item ID: 13865 Contact: Sam www.BakerProducts.net Ph: (888) 401-6367 x702 800.S48.6914 I S73.663.7711 ❘
NO. 29 boom loader, 3 knife disc, Newer (888) 401-MENS L!
discharge chute, New banding
L O G G I N G
that Started Contact: MARK it All! Email: Mark@lumbermensco.com
John Deere 648D
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
John Deere 850J Dozer
'12 CAT 573C Feller Buncher
Right around 3500 hours, excellent condition, brand new undercarriage, sprockets, and rollers. Very well maintained. Call for more info!
with SC-57 head, just over 2400 hours, dry, tight, very well maintained, everything works and operates as it should. Call for more info
Item ID: 14192
Contact: MARK Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703
Item ID: 14193
'94 Barko 160 Knuckleboom Item ID: 14186
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632
Contact:MARK J Williams Contact: Email: Mark@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 708 702-875-2703
‘93 Barko 180B
Item ID: 14077 Contact: Austin ‘04 JCB 441 Wheel Ph: (888) 401-6367 Loader x703 Item ID: 13888
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘08 John Deere 335C Item ID: 14089
‘95 John Deere C6 Tree Farmer
L O G G I N G
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘99 Case 850G Long 13428 Victory Ln. // PO Box 124 ‘89 Timberjack 230A Track Dozer Item ID: 13909NY 13606 Adams Center,
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Item ID: 13885
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
capacity!. Item ID 13421. Sam x702
BARKO
off onto a conveyor. This is a very
well built processor. Item ID 13820.
“13 KMC 2500 Tack Skidder Item ID: 14078
Contact: AUSTIN ‘05 Gehl CTL 70 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Item ID: JW-986495
Contact: J Williams Ph: (888) 401-6367 x701
‘83 John Deere 4850
‘05 CAT TK560
ID: 14004 chainItem conveyer, 8 way splitter, on Item ID: 14073 20,000lb goose neck trailer. Item ID Contact: Austin Contact: SAM 13916. Austin x703 Ph: (888) 401-6367 x703Email: Sam@lumbermensco.com with 1700 hours, in very good
Phone: 888-401-6367 EXT 702 Best Value Portable Log Splitter
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item ID 13644. Sam x702
‘93 Barko 180B FIREWOOD PROCESSORS
Item ID: 14077 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, foot Phone: 888-401-6367 EXT30 703 376 Issue 364
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge
adjustable to single two way. Great
Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
homemade processor with a 10’
John log‘85 deck. Has a Deere hydraulic440D grapple, Item ID: 12453 chain and kicker that all runs off Contact: AUSTIN of a 4 cylinder Mercedes power Email: Austin@lumbermensco.com unit. Has888-401-6367 a 4’ chain saw EXT that 703 kicks Phone:
Lumbermens since 1986
❘
Sam x702
‘09 John Deere Firewood Processor - This is 650J XLT
tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.
grapple, 5,000 original hours. 13238. Chris x700 Item ID: 14070
1995 BarkoAUSTIN 775 B Feller Buncher Contact: -Email: PumpsAustin@lumbermensco.com recently redone. 400 hrs Phone: 888-401-6367 EXT 703 on injection pump. always started good. in good working order. 22in kohing head. head works great.
1999 Barko 160D - new engine with
manuals and receipts. Purchased
approximately 1500 hours. Hour
new for $32,500. Item ID 13865.
meter dont work. The last 2 owners
Sam x702
LOGGING EQUIPMENT BANDIT
have only used it to load trucks or
as a backup as needed. Has a CTR
90’ CAT 213 Excavator
‘80 John Deere 540B Chipper - Cat Under Carriage at Item ID: 11345 50% or better. 475 hp Cummins Contact: Diesel. 7500AUSTIN Hours. One owner. Email: Austin@lumbermensco.com Well maintained. Item IDEXT 13294. Phone: 888-401-6367 703 Sam x702 with 850 HP. 5300 hrs. Mill in
motor, Rotobec continuous
Item ID 13185. Sam x702
One owner and comes with all
3412 Caterpillar Diesel engine
knuckleboom, 30' boom, 75hp
‘95 Bell Ultra T
automatice firewood processor Contact: AUSTIN Email: Austin@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 703 low hours. Control panel includes
2004 Bandit Beast Model 4680 -
1994 Barko 160B - Electric
(excellent condition.). Item ID
a Chomper Model PDA Item ID: 16 14091
1999 Bandit 1900 Tracked Disc
Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
delimber, Item grapple been rebuilt. ID:has 14110 Boom cylinders have minor leaks. Currently has 3316 hours. Item ID 13694. Sam x702
Contact: AUSTIN 94 Barko 275 - Excellent value Email: Austin@lumbermensco.com with low at hours at 3,500. 5.9 Phone: 888-401-6367 EXT 703 CUMMINS continuous grapple. Runs Great!. Item ID 13740. Sam
‘02 Jackson Shavings Mill x702 Item ID: 13736 BELL
Contact:1990 AUSTIN Bell Super T - This Bell has good condition. Just finished 10 Email: Austin@lumbermensco.com a brand new Duetz engine. Lever Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny Remote control. Big production
List seLL exchange buy save
❘
LumbermensCO.com
** CALENDAR**
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and JohnofDeere 648D at Location Itemall ID:equipment 14255 www.LumberMB\ISmagazine.com
NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York
230D Timberjack Forwarder www.starwebhosting.net/woodsmen/
Grapple Skidder Currently 6303 original hours! Meter is working, comes with 28L tires at 85%(NOT TIRES IN PICS) 2 1/2 years ago the motor was overhauled by John Deere great winch, tight pins, dry Danckaert Band Resaw - Roughly machine no leaks, woods ready/working machine! maintenance done 250-300 hours paper work docu10 hours on this machine since it menting work from John Deere. Part time loggers selling only because recently got new equipment. has been rebuilt, it has a 24foot in
Item ID: 3778
Item ID: 14247
it All!
Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703 published a monthly circular
PUBLISHER Contact: AUSTIN
Woods Publishing Email: Austin@lumbermensco.com
MID-ATLANTIC Phone: 888-401-6367 EXTLOGGING 703 ADVERTISING SALES & BIOMASS EXPO
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
2015 Cat 525D
John Williams Item ID: 14167 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN
DESIGN DIRECTOR Donna Heninger
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Escanaba, Michigan
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
Email: Mark@lumbermensco.com
with 44 inch wheels, and Phone: 888-401-6367 EXTall 708the 702-875-2703
bells and whistles, its a production machine, with air strain conveyers
'13 John Deere 548G III
that go up and down, with airbags,
Item ID: 8789 MID-ATLANTIC LOGGING & BIOMASS it includes two sets of Mcdonough Fri, 15 Sept - Sat, 16 Sept 5600 Hours, 23.1 Tires.
pressure guides. Top Casting wheel Selma, North Carolina Contact:isSAM www.midatlantic-logging-biomass supported on both sides. This Email: Sam@lumbermensco.com expo.com/ is an extremely accurate machine
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
EQUIPMENT REPS
Phone: 888-401-6367 EXT 702 in ve1y good condition, Cuts 130
feetTimberjack a minute also has 207CLT presses.
Item ID 13876. Austin x703 Item ID: 14144
S&W 125 engine, Band Mill with Out of frame rebuilt out of frame rebuilt transmission, rebuilt reverse box. Runs great, paper work Caterpillar generator Low hours documenting all work done.
on the mill, electronic computer Set
Contact: MARK Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 OR 702-875-2703
Cat 3406 140KW Genset, 12,400
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
Contact: feed deck MARK 20 foot out feed deck
72NDContact: ANNUALAUSTIN GREAT LAKES Contact: LIZ Email: Austin@lumbermensco.com LOGGING & HEAVY EQUIPMENT EXPO Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 703 Thurs, 7 Sept Sat, 9 Sept Phone: 888-401-6367 EXT 701
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants‘00 Timbco 445D worldwide. Item ID: 14096
MARKETING DIRECTOR
Hot Springs, Arkansas 07’ Tigercat 620C Item ID: 14248 www.arkloggers.com
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 31
L O G G I N G
The Tree
2010that Tigercat 724E Started
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO 25 August - Sat, 26 August
353 Detroit Engine, Unknown hours, Fri, Standard Trans, Husky Brute loader works well but pins are loose, No major leaks, Needs brake work, 2 extra tires at 50%
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘04 Fabtek 344B Item ID: JW-093430
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
'94 CAT 518 Grapple Winch
'97 CAT‘16 525 Halverson Original CableH140 Skidder
L O G G I N G
Item ID: 99807
Item ID: 9901
Skidsteer (DEMO)
12k hours runs great tight center section
Comes with a set of tracks.
Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
D5H TSK
Item ID: 7098 LOW Hours, Excellent Condition, Very Hard To Find Dozer. Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘13 KMC 2500 Track Skidder '09 John Deere 753J Buncher
532 CAT Feller Buncher
Item 14106 Item ID:ID: 14078 Contact: Austin Contact: Ph: AUSTIN (888) 401-6367 x703
13428 Victory Ln. // PO Box 124 Item ID: 14079 Adams Center, NY 13606 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
CAT 518 Cable skidder Item ID: 14273
Item ID: 14257 Contact: Austin Ph: (888) 401-6367 x703 around 7000 hours strong winch 50%
rubber 28's. Everything works as it should. Woods ready, call for video!
capacity!. ID 13421. Sam x702 Contact:Item MARK Email: Mark@lumbermensco.com BARKO Phone: 888-401-6367 EXT 708 1994 Barko 160B - Electric 702-875-2703 knuckleboom, 30' boom, 75hp
John Deere 650H Forestry Dozer motor, Rotobec continuous well built processor. Item ID 13820. Item ID: 14274 grapple, 5,000 original hours. Sam x702
2004 650H roughly 8500 hours, with good winch new (excellent condition.). Item ID cable, 35- 40%, 6 way blade, caged cab, forestry package, woods ready, log arch, new head gasket 500 hrs. ago, new 13238. Chris x700 linkage in blade, family owned machine.
Email: Mark@lumbermensco.com Item ID: JW-986495 Phone: 888-401-6367 EXT 708 OR 702-875-2703
- Pumps recently redone. 400 hrs with John Deere power unit with Phone: 888-401-6367 EXT 708 OR 702-875-2703
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703
with 1700 hours, in very good
condition. Easily produces high
'02 WoodMizer LT-40
quality chips with Item ID:patented 11345 ‘Cone’ drum design. Can easily load 42’ Kubota Diesel engine. vans and produce 6 - 8 loads per Contact: AUSTIN day. Item ID 13882. Austin x703 Email: Austin@lumbermensco.com Phone:EDGERS 888-401-6367 EXT 703 & GANGS Brewco Saws - Two Brewco Saws
in excellent condition. Runs great.
Contact: J Williams Ph: (888) 401-6367 x701
chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Best Value Portable Log Splitter
'11-'12 Helle Sawmill
- Small manufacturer in PA has Item ID: 14119 made the best valued log splitter. 56” auto carriage hydraulic head control Handles logs up to 32”. Uses cab, vertical 2 saw edger log turner, 5 log 13HP Honda motor. stop and load deck, 60’ Manual long track.start but electronic option is available. Contact: MARK Has LogMark@lumbermensco.com Lift. Uses 4-way wedge Email: Phone: EXT 708 adjustable888-401-6367 to single two way. Great 702-875-2703 Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
‘05homemade Woodmizer processorLT300 with a 10’
Item ID: 14031 FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, Contact:chain AUSTIN 2010 Shop Built Wood Processor and kicker that all runs off Email: Austin@lumbermensco.com - It has a 353 Detroit diesel, 40 Phone: of a 4 cylinder 888-401-6367 Mercedes EXT 703 power inch insert tooth circle saw, 30 foot unit. Has a 4’ chain saw that kicks 376 Issue 364
CAT Grapple Skidder Item515 ID: 13920
Firewood Processor - This is
‘83 John Deere 4850
Item ID 13644. Sam x702
off onto a conveyor. This is a very
‘95 John Deere C6 Tree Farmer
Cat 518 cable transmission was rebuilt about 3 years ago uses just a little bit of oil but the motor is good and strong, gearmatic winch new 200' of cable put on a few months ago tires 3 at 75% 1 at 50% redone axle housing.
‘05 Gehl CTL 70 Contact: MARK
S A W M I L L
Item ID:Forwarder 14077 Contact: Austin Item ID: 14109 Ph: (888) 401-6367 x703
One Of AItem Kind.ID: Has Never Pulled A Log. JW-909632 Owned By An Electric Company. Deal!
Contact: J Williams (888) 401-6367 x701 Contact:Ph: SAM
Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702
‘9301’ Barko 180B Ponsee Bison
Lumbermens since 1986
❘
a Chomper Model 16 PDA
1995 Barko 775 B Feller Buncher automatice firewood processorContact: MARK Email: Mark@lumbermensco.com
low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.
on injection pump. always started
good. Timbco in good working order. 22in 2005 425 EXL Item ID:head 14275 kohing head. works great.
2015 sp761lf head 1000 on head and 2015 Itemharvester ID 13185. Samhours x702 One owner and comes with allwith dasa 5 computer system frame hours 10,900 Undercarriage 75% no leaks1999 dry, rebuilt final160D drive the other fiengine nal drive iswith new, Barko - new manuals and receipts. Purchased engine has ECM, new swing drive gear box, new implement pump
new for $32,500. Item ID 13865. Sam x702
LOGGING EQUIPMENT BANDIT
approximately 1500 hours. Hour
Contact: MARK Email: Mark@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 708 OR 702-875-2703
have only used it to load trucks or
as a backup as needed. Has a CTR
Bell Ultra C
delimber, has been rebuilt. Itemgrapple ID: 1025 Boom have minor leaks. Chipper - Cat Under Carriage1996 at model withcylinders Joystick control and Koehring Head. Item ID 13694. Sam x702 50% or better. 475 hp Cummins 1999 Bandit 1900 Tracked Disc
Contact: AUSTIN 94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Email: Austin@lumbermensco.com
with low EXT at hours 3,500. 5.9 Well maintained. Item ID 13294. Phone: 888-401-6367 703 ORat931-797-8029 Sam x702
2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. 1991 Timberjack 450BSam x702 Item ID: 1826
with 850 HP. 5300 hrs. Mill in New pins & bushings. TightBELL skidder all around. Ready to drag some wood.
good condition. Just finished 10
1990 Bell Super T - This Bell has
Contact: AUSTIN a brand new Duetz engine. Lever Acre clearing job, ready to work! Email: Austin@lumbermensco.com
Phone: 888-401-6367 EXTbar, 703 OR 931-797-8029 control, 33” pump and tranny Remote control. Big production
List seLL exchange buy save
❘
LumbermensCO.com
** CALENDAR**
'02 Woodmizer LT-40 Super HD
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
Item ID: 14118
Has the Kubota Diesel Motor!
NY STATE WOODSMEN'S FIELD DAYS Contact: AUSTIN Fri, 18 August - Sun, 20 August Email: Austin@lumbermensco.com New York Phone: Boonville, 888-401-6367 EXT 703 www.starwebhosting.net/woodsmen/
Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
Woods Publishing
Contact: AUSTIN DESIGN DIRECTOR Email: Austin@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 703
EQUIPMENT REPS
MID-ATLANTIC
LOGGING & BIOMASS EXPO
Item ID: 14076
it includes two sets of Mcdonough pressure guides. Top Casting wheel
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
‘06 Woodmizer LT70 Electric
is supported on both sides. This is an extremely accurate machine
Super in ve1y'16 goodLT40 condition, Cuts 130
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Hydraulic feet a minute also has CLT presses. Item ID: 9903 Item ID 13876. Austin x703 136 hours, SOne & WOwner! 125 Band Mill with Tons of Extra Parts. Priced cheap! Caterpillar generator - Low hours Contact: on the mill,SAM electronic computer Set Email: Sam@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 702 Cat 3406 140KW Genset, 12,400
Lexington, Kentucky http://www.kfia.org/ Wood-Mizer LT40 KentuckyWoodExpo.aspx Item ID: 13995
Contact: AUSTIN AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Fri,Phone: 6 Oct888-401-6367 - Sun, 8 OctEXT 703 Phone: 888-401-6367 EXT 703
Cambridge, Ohio www.ohioforest.org
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co
MAILING ADDRESS
that go up and down, with airbags,
MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept
PUBLISHER
John Williams Corley Complete Sawmill (888) 401-6367 ext. 701 Item ID: 14035 j@lumbermens.co
machine, with air strain conveyers
CARRIAGES & DRIVES
2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
B & B Mfg. ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Baker ...................................... 5, 7
Menominee Saw ..................... 29
sawyers cab, computer controls,
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
cabinet with electronic drives for
Brute Force Mfg. ..................... 31
Midwest Sharpening.............. 26
carriage knees, husk including
Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Buck Equipment (AIM) ........ 36
Morbark ..................................... 9
Corley Mfg .............................. 32
Multitek ................................... 12
CRD Metalworks .................... 25
Piper's Saw Shop.................... 13
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with out written consent. ©2017 Woods Publishing
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3
The Paul Bunyan Show ......... 39
Hurst Boiler ............................. 14
Thomas Industrial Controls..... 10
Iron Bull ................................... 21
Union Grove Saw & Knife.. 2, 37
Kilgore Saw ............................. 22
Universal Refiner ................... 23
Lignomat ................................. 24
WoodMizer ................................ l
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co
POSTMASTER
- USED FORESTRY EQUIPMENT FOR SALE
❘
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
with onboard log turners, carriage drive, hyd pac for carriage,
48" bottom saw and 36" top saw
STACKING RAC
www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘
(888) 401-MENS L!
NO. 33
S A W M I L L
published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
MARKETING DIRECTOR
‘13hours Woodmizer 4000 Sawmill 10 on this machine since it Item ID: 14000 has been rebuilt, it has a 24foot in Contact: AUSTIN feed deck 20 foot out feed deck Email: Austin@lumbermensco.com with 44 inch wheels, and all the Phone: 888-401-6367 EXT 703 bells and whistles, its a production
Contact: AUSTIN Email: Austin@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 703 LOGGING & HEAVY EQUIPMENT EXPO
Contact: AUSTIN Email: Austin@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 703
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
Danckaert Band Resaw - Roughly
Sawmill Hot Springs, Package Arkansas Item ID: 14084 www.arkloggers.com
The Tree Sanborn Scragg Mill that Started Item ID: 14050 it All!
ADVERTISING SALES
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Complete Fri, 25Edmiston August - Sat, 26 August
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
‘08 Timberking B20 Item ID: 13956
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘93 Barko 180B
‘16 Halverson H140 ‘06 Brewco B1600 Resaw Skidsteer (DEMO) Item ID: 13862
Meadows #1 Complete Sawmill
Item ID: 14077 Contact: Austin 3-HD ‘14 Hurdle Ph: (888) 401-6367 x703 Block Sawmill
Item ID: JW-909632
Item ID: 14069
Item ID: 13997
Contact:Contact: SAM J Williams Email: Sam@lumbermensco.com Ph: (888) 401-6367 x701 Phone: 888-401-6367 EXT 702
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Woodmizer LT40 Sawmill Item ID: 14227
2010 Woodmizer lt40 2250 hours 28 hp koeler v-twin gas engine extender arms simple setworks hydraulic deck all lever controlled low hours
‘95 John Deere C6 Contact: Tree MARK Farmer Email: Mark@lumbermensco.com
S A W M I L L
Item ID: EXT 13920 Phone: 888-401-6367 708 or 702-875-2703
Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder Woodmizer Twin Blade
Danchaert Band 13428 Victory Ln. Resaw // PO Box 124 Meadows #2 Deluxe
Item ID: 13876NY 13606 Adams Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Item ID: 14250
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Diesel Edger Item ID: 14078 Item ID: 14191 Contact: Austin capacity!. Item ID 13421. Sam x702 Ph: (888) 401-6367 x703 Contact: AUSTIN BARKO
Email: Austin@lumbermensco.com Barko 160BEXT - Electric Phone: 1994 888-401-6367 703 knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very well built processor. Item ID 13820. Sam x702
(excellent Itemcondition.). ID: 14171 Item ID 13238. Chris x700 AUSTIN Barko 775 B Feller Buncher automatice firewood processorContact:1995 Email: Austin@lumbermensco.com Pumps recently redone. with John Deere power unit with Phone: 888-401-6367 EXT 703 400 hrs on injection pump. always started low hours. Control panel includes Firewood Processor - This is
‘05 Gehl CTL 70 Baker Sawmill & Edger Item ID: 14226
‘83 2008 BakerJohn sawmill andDeere Edger less than 5600 hours 3665D 85 hp cummings engine has 2500 Hours, new breather, regular maintanence brand new track/con4850 duate produces 6-7k feet per day. Baker edger 28hp predator setworks hydraulic setworks are Itemengine ID:baker 14073 automatic has full owners manual
Contact: Austin Contact: Ph: (888)MARK 401-6367 x703
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 Precision Scragg Precision Scragg, excellent condition, 40 hp twin saw motor, 4,6,8,and 10 chain way of splitter, on inches,conveyer, can send8video it running, Va Area goose neck trailer. Item ID 20,000lb
a Chomper Model 16 PDA
in good working tach, oil pressure, water temp and '15 good. Blockbuster 18-20order. Plus22in amp gauges. Cuts logs up to 16”. One owner and comes with all manuals and receipts.
quality chips with patented ‘Cone’
Handles logs up to 32”. Uses
1999 Bandit 1900 Tracked Disc
but electronic option is available.
50% or better. 475 hp Cummins
drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS FrickSaws Sawmill & Edger Brewco - Two Brewco Saws Item ID: 14224 in excellent condition. Runs great.
Fricks the edger is also a Fricks the motor is a Detroit
671 theID log 13644. deck,sawmill and motor Item Sam x702are all on wheels
Can be broke down or set up in two hours time it has a three chain log deck, 48 inch circle saw and four head block carriage.
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor Contact: MARK -Email: It has aMark@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 708 inch insert tooth circle saw, 30 foot 702-875-2703 376 Issue 364
13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge
Morgan Band adjustable to single twoResaw way. Great
Value! PA. Item ID 12062. x702 with runaround system, 40 Hp Sam saw motor with cab controls and panel, Lots Firewood Processor - This is of a extra bands and filing equipment. Running NOW. Setworks and in-feed homemade processor with aand-out 10’ feed decks NOT INCLUDED in this price... theydeck. will not be sold Hydralic power pack log Has a hydraulic grapple, included with Morgan, Va area
chain and kicker that all runs off Contact: LIZ Mercedes power of a 4 cylinder Email: Liz@lumbermensco.com unit. Has888-401-6367 a 4’ chain saw EXT that 701 kicks Phone:
Lumbermens since 1986
❘
Item ID: 14148 Item ID 13185. Sam x702
approximately 1500 hours. Hour new for $32,500. Item ID 13865.Contact: MARK
13916. Austin Contact: LIZx703 Email: Liz@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 701 - Small manufacturer in PA has
made the best valued log splitter.
Firewood kohing head. Processor head works great.
with 30ft conveyer! Only has about 150 hours. Excel1999 Barko 160D - new engine with Purchased lent condition.
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703 with 1700 hours, in very good condition. Easily produces high
motor, Rotobec continuous
03’ Woodmizer LT-300 grapple, 5,000 original hours. Operation
Sam x702
LOGGING EQUIPMENT BANDIT
Email: Mark@lumbermensco.com meter dontEXT work. The last 2 owners Phone: 888-401-6367 708 OR 702-875-2703
have only used it to load trucks or
as a backup as needed. Has a CTR
1996 Jackson Shavings Mill
Chipper - Cat Under Carriage at
delimber, has been rebuilt. Itemgrapple ID: 1271 Boom cylinders have minor leaks.
Model 30D6
Item ID 13694. Sam x702
Contact: AUSTIN
Email: Austin@lumbermensco.com 94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner.
Phone: 888-401-6367 EXT 703 OR 931-797-8029
Well maintained. Item ID 13294. Sam x702
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Package RunsSawmill Great!. Item ID 13740. Sam 2004 Bandit Beast Model 4680 - Cleerman
Item ID: 14163 3412 Caterpillar DieselMillengine equipment. 20Foot 3 x702 strand log deck 3 head block cleerman carriage with
BELL with 850 HP. 5300 hrs.split Mill in55 inch jocar band headrig hydraulic strain edger 400 series west plains re-
silvtech setworks 50 hp cleerman feed works 40 foot roll case corley 2 saw center saw 40 foot green chain all electrical complete mill. Call for more pics
1990 Bell Super T - This Bell has good condition. Just finished 10 Contact: MARK a brand new Duetz engine. Lever Acre clearing job, ready to work! Email: Mark@lumbermensco.com Phone: 888-401-6367 702-875-2703 control,EXT 33”708 bar, or pump and tranny Remote control. Big production
List seLL exchange buy save
❘
LumbermensCO.com
FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com
Item ID: 200
Complete operation that includes a meadows edger, HMC V206 Debarker, 48” Chipper, blower, decks, and many other spare parts. STATE live WOODSMEN'S FIELD DAYS
NY Fri, 18AUSTIN August - Sun, 20 August Contact:
Email: Austin@lumbermensco.com Boonville, New York Phone: 888-401-6367 EXT 703 OR 931-797-8029
www.starwebhosting.net/woodsmen/
Baker 2 Head Resaw
The Tree With return, runsStarted 1 inch bands, runs that good it All!
LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan
Item ID: 14087
Contact: AUSTIN Email: Austin@lumbermensco.com MID-ATLANTIC ADVERTISING SALES Phone: 888-401-6367 LOGGING & BIOMASS EXT EXPO 703
Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co
it includes two sets of Mcdonough
Fri, 15 Sept - Sat, 16 Sept
pressure guides. Top Casting wheel
DESIGN DIRECTOR Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
is supported on both sides. This is an extremely accurate machine
'91 Fuel Harvester KENTUCKY WOOD EXPO Grinder Fri, 15 SeptTub - Sat, 16 Sept
in ve1y good condition, Cuts 130
http://www.kfia.org/ 3406 Cat engine and 4424 total KentuckyWoodExpo.aspx machine hours.
S & W 125 Band Mill with
feet a minute also has CLT presses.
Item ID: 14112 Lexington, Kentucky
John Williams Item ID: 14188 (888) 401-6367 ext. 701 j@lumbermens.co Contact: AUSTIN
Item ID 13876. Austin x703
Kenworth Road Tractor Truck
Caterpillar generator - Low hours Item ID: 14092 on the mill,AUSTIN electronic computer Set Contact:
AUSTIN SHOW THE Contact: PAUL BUNYAN Email: Austin@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct
Email: Austin@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 703 Cat 3406 140KW Genset, 12,400
Phone: 888-401-6367 EXT 703
EQUIPMENT REPS
Chomper Firewood Processor Item ID: 14139
** INFO
Under 300 hrs 65 hp John Deere diesel engine Austin Woods sheers the log no sawdust (888) 401-6367 ext. 703 austin@lumbermens.coContact: MARK
Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 708 702-875-2703 B & B Mfg. ............................... 18
P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367
AD SUBMISSIONS
May be sent to morris@lumbermens.co Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
Cambridge, Ohio www.ohioforest.org
hours ready to run. Item ID 13434.
Now One PhoneCARRIAGES Puts You & DRIVES 2010 Cardinal HD Carriage in Touch with ThE Single Source LINK** Carriages (Sawmill) - Cardinal for all your Sawmill Needs! Carriage line it includes carriage Sam x702
M&F Gauge ............................. 28
B. H. Payne .............................. 16
with onboard log turners, carriage Corley Meadows Mill, IncSawmill . ................ 33maChinery drive, hyd pac for carriage,
Baker ...................................... 5, 7
Menominee Saw ..................... 29
Bell's Machining ..................... 27
Metal Detector's Inc. .............. 30
Tyrone Berry Carriage DriveS sawyers cab, computer controls, lewiS ConTrolS opTimizaTion
cabinet with electronic drives for
Carriage26Linearcarriage & Set Shaft knees, husk including Brute Force Mfg. ..................... 31 Midwest Sharpening.............. Lewis Controls “Electronics for by sawmillers” 48"sawmills bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 MorbarkTyrone-Berry ..................................... 9 Carriage Drives & Parts • Headrig Slabbers Log Turners • Bandmills Corley Mfg .............................. 32 Multitek ................................... 12 & Linebar Resaw Systems Board & Gang Edgers • Trimmers '99 International 4700 CRD Metalworks .................... 25
Chip Truck
The Lumberman's Exchange is Item ID: 14116 CW Mill-ArmorHog .............. 17 published monthly WoodsTruck AM General M818byArmy CW 71,697 Mill-Hogzilla Publishing, P.O.ID: Box14576 1916, Item Only Miles. ................... 15 Columbia, TN 38402. All rights Dyna Products ........................ 35 Contact: WALKER reserved. All editorial/ advertorial Contact: AUSTIN submissions are used at the Email: Walker@lumbermensco.com Email: Austin@lumbermensco.com Empire Hydraulics ................... 8 discretion of the publisherEXT and707 may Phone: 888-401-6367 Phone: 888-401-6367 EXT 703 be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have Hahn Machinery ...................... 3 been made to ensure accuracy of ‘78 Windzer Forklift content submitted by advertisers Item ID: 14235 Hurst Boiler ............................. 14 and writers, the Lumberman's Exchange, its principles and 1978 Windzer Forklift fuel................................... pump call for more info Ironneeds Bull 21 associates, are not held liable for errors or omissions. Reproduction, Contact: Kilgore MARK Saw ............................. 22 in whole or part, is prohibited with Email: Mark@lumbermensco.com LignomatEXT ................................. out written consent. Phone: 888-401-6367 708 or 702-875-270324 ©2017 Woods Publishing
- USED FORESTRY EQUIPMENT FOR SALE
❘
Piper's Saw Shop.................... 13
Rotochopper............................ 40 The Most Complete
STACKING RAC
‘0 74
Ite Co Ph
Line of Sawmill Machinery Since 1905! Row Electric ............................ 20 Sawmill Exchange .................. 11 Single Machine or Complete Turn-Key
Operation is Only One Call Away For Parts,4 Service & Sales Smith Sawmill ........................... SelectMore Sawmill ......................... Production & 19 Profit
Call (423) 698-0284 CORLEY
The Paul Bunyan Show ......... 39
Thomas Industrial Controls..... 10
Union Grove Saw & Knife.. 2, 37
mfg
Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co
POSTMASTER
that go up and down, with airbags,
Selma, North Carolina www.midatlantic-logging-biomass expo.com/
MARKETING DIRECTOR '99 Peterbilt Road Tractor
MAILING ADDRESS
machine, with air strain conveyers
Mack Log Truck MID-ATLANTIC LOGGING & BIOMASS
Woods Publishing
Donna Heninger
Call for info!rebuilt, it has a 24foot in has been Contact: MARK feed deck 20 foot out feed deck Email: Mark@lumbermensco.com with 44 inch wheels, andEXT all the Phone: 888-401-6367 708 702-875-2703 bells and whistles, its a production
Contact: LIZ Email: Liz@lumbermensco.com 72ND ANNUAL GREAT LAKES Phone: 888-401-6367 EXT 701
MISCELLANEOUS
PUBLISHER
Danckaert Band ResawLT300 - Roughly Woodmizer Item 14278since it 10 hours on thisID: machine
Hot Springs, Arkansas Ready to run, operates from either end, Va Area www.arkloggers.com
Contact: LIZ Email: Liz@lumbermensco.com Since 1986, Lumbermens has Phone: 888-401-6367 EXT 701 published a monthly circular
reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Quality 4 Head Saw Fri, 25 August - Sat, Trim 26 August
S A W M I L L
** CALENDAR** Frick #1 Jumbo Mill
Universal Refiner ................... 23
www.BakerProducts.net WoodMizer ................................ l • sales@corleymfg.com www.corleymfg.com 800.S48.6914 I S73.663.7711
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
❘
(888) 401-MENS L!
NO. 35
20 64
Ite Co Ph
“Precision Under Pressure”
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
1990 Freightliner Item ID: 7422
'10 Woodsman 440 Whole Tree Chipper Item ID: 14105
3,000 original hours. Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘16 Halverson H140 Skidsteer (DEMO)
Cummins motor w/Jake Brake, 9 speed Eaton Fuller, Air Ride over spring suspension, 11.22.5 fair tires, 15'10" of frame from cab back, has A/C but not Item ID: JW-909632 working, 322,470 miles
Western Star Heavy Haul Item ID: 14093
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
Contact: J Williams Ph: (888)LIZ 401-6367 x701 Contact:
Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701
‘93 Barko 180B
'99 International
Item ID: 14077 Straight Truck Contact: Austin Ph: (888) 401-6367 x703 No CDL’s to drive, 24’ bed. 120,000 miles. Good condition.
Contact: LIZ Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701
‘04 Takeuchi TLN140
M I S C E L L A N E O U S
Item ID: JW-880805
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
‘13 KMC 2500 Track Skidder
Shop Built Firewood Processor 13428 Victory Ln. // PO Box 124
Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703
Item ID: 13994NY 13606 Adams Center,
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703
off onto a conveyor. This is a very '93 KW 425 CAT ID:13342 well built Item processor. Item ID 13820.
‘06 Cord King Model 60 Item ID: 14068
‘05 Gehl CTL 70 Contact: AUSTIN
‘83 John Deere Shop Built Wood 4850 Processor
Item ID: 14073 Item ID: 14038 Contact: Austin Contact: AUSTIN Ph: (888) 401-6367 x703
Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 with 1700 hours, in very good condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703
EDGERS & GANGS
Brewco Saws - Two Brewco Saws
in excellent condition. Runs great. Item"Like ID 13644. Sam x702 New" Tajfun
Firewood Processor FIREWOOD PROCESSORS
Item ID: 14249 2010 Shop Built Wood Processor AUSTIN -Contact: It has a 353 Detroit diesel, 40 Email: Austin@lumbermensco.com inch insert tooth circle saw, 30 foot Phone: 888-401-6367 EXT 703 376 Issue 364
Email: ID: Austin@lumbermensco.com Item JW-986495 Phone: 888-401-6367 Contact: J Williams EXT 703 Ph: (888) 401-6367 x701
Sam withx702 ten speed 220 Inframe twenty four feet of frame Firewood Processor - This is behind the cab a Chomper Model 16 PDA automatice firewood processor Contact: WALKER Email: Walker@lumbermensco.com with John Deere power unit with Phone: 888-401-6367 EXT 707 low hours. Control panel includes
tach, oil pressure, water temp and '98 International Chipper Truck
ID:Cuts 14140 amp Item gauges. logs up to 16”. 164k miles can haul 15 cubic yards, chain conveyer, 8 way splitter, on One owner and comes with all 12' long, small stash compartment, very well 20,000lb goose neck trailer. Item ID truck manuals and receipts. Purchased kept 13916. Austin x703
Contact: new MARKfor $32,500. Item ID 13865. Email: Mark@lumbermensco.com Best Value Portable Log Splitter Sam x702 Phone: 888-401-6367 EXT 708 OR 702-875-2703
- Small manufacturer in PA has
made the best valued log splitter. Handles logs up to 32”. Uses
LOGGING EQUIPMENT BANDIT 1999 Bandit 1900 Disc ‘83 InternationalTracked S-Series
Item ID: Under 14080Carriage at 13HP Honda motor. Manual start Chipper - Cat Contact:50% AUSTIN but electronic option is available. or better. 475 hp Cummins Email: Austin@lumbermensco.com Diesel. 7500 Hours. One owner. Has Log Lift. Uses 4-way wedge Phone: 888-401-6367 EXT 703 adjustable to single two way. Great Well maintained. Item ID 13294. Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a
Sam x702
2004 Bandit Beast Model 4680 -
3412 Caterpillar Diesel engine homemade processor with a 10’‘06 Western Star Michigan Special ID:5300 14011 with Item 850 HP. hrs. Mill in log deck. Has a hydraulic grapple, chain and kicker that all runs off condition. Just finished 10 Contact:good AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 Remote control. Big production unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
List seLL exchange buy save
‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703
‘15 Cord King M44
ID:13421. 13961Sam x702 capacity!.Item Item ID
BARKO Contact: AUSTIN Email: Austin@lumbermensco.com 1994 Barko 160B - Electric Phone: 888-401-6367 EXT 703 knuckleboom, 30' boom, 75hp motor, Rotobec continuous
grapple, 5,000 original hours.
(excellent condition.). Item ID 13238. Chris x700
1995 Barko 775 B Feller Buncher
- Pumps recently redone. 400 hrs
on injection pump. always started
Offworking Trimorder. Saw22in good.Cut in good Item ID: 5461 kohing head. head works great.
10 HP cut x702 off blade, 5 HP Item IDmotor 13185.on Sam motor on feed chain, Good Condition.
1999 Barko 160D - new engine with Contact: LIZ 1500 hours. Hour approximately Email: Liz@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 701 have only used it to load trucks or as a backup as needed. Has a CTR
delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702
94 Barko 275 - Excellent value
with low at hours at 3,500. 5.9
CUMMINS continuous grapple.
Runs Great!. Item ID 13740. Sam x702
BELL 3 Strand Log Deck
Item ID: 14095 1990 Bell Super T - This Bell has
AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com control, 33” bar, pump and tranny Phone: 888-401-6367 EXT 703 ❘
LumbermensCO.com
** CALENDAR**
BOBCAT 610
02’ Jackson Lumber Harvester
www.starwebhosting.net/woodsmen/
The Tree that Started it All!
ready to work, tires and wheels like new, handles up to 4" diameter brush,PUBLISHER automatic feed
Woods Contact: MARKPublishing Email: ADVERTISING Mark@lumbermensco.com Phone: 888-401-6367SALES EXT 708 Morris Woods 702-875-2703 (888) 401-6367 ext. 704 morris@lumbermens.co
Horizontal Grinder
Donna Heninger
Kenworth Log Truck
isContact: supported LIZon both sides. This Liz@lumbermensco.com isEmail: an extremely accurate machine Phone: 888-401-6367 EXT 701 in ve1y good condition, Cuts 130
THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org
S &dynamic W 125 Band Mill585with 2008 conehead chipper model 1762 hours great condition 500 hp john deere comes with $2k worth of new knives Caterpillar generator hours new drum with about 6o hours inch thick heavyLow duty skin onMARK the mill, electronic computer Set Contact: Email: Mark@lumbermensco.com works,1 1/2" or 2" band, 22ft. track Phone: 888-401-6367 EXT 708 or 702-875-2703 Cat 3406 140KW Genset, 12,400
austin@lumbermens.co Contact: AUSTIN Email: Austin@lumbermensco.com ADDRESS Phone:MAILING 888-401-6367 EXT 703 931-797-8029 P.O. Box 1916
Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 B & B Mfg . ............................... 18
M&F Gauge ............................. 28
B. H. Payne .............................. 16
Meadows Mill, Inc. ................ 33
Bakerwith ...................................... 5, 7 Mack Prentice 120 Item ID: 14215 Bell's Machining ..................... 27
Menominee Saw ..................... 29
hours ready to run. Item ID 13434. Sam x702
** INFO LINK**
Contact: Brute AUSTIN Force Mfg. ..................... 31 POSTMASTER Email: Austin@lumbermensco.com Buck Equipment (AIM) ........ 36 Send address changes to: Phone: 888-401-6367 EXT 703
The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and General space. Although all efforts have 77 Log Trailer been made to ensure accuracy of Item ID: 14153 content submitted by advertisers and writers, Log the Lumberman's 77 General Trailer with parts Exchange, its principles and and extras. Call for more info. associates, are not held liable for errors or omissions. Contact: MARK Reproduction, in whole or part, is prohibited with Email: Mark@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 708 702-875-2703 ©2017 Woods Publishing
it66includes two Precision sets of Mcdonough inch ReBuilt Chipper good shape pressure guides. Top Casting wheel
ID: 14196 Item Item ID 13876. Austin x703
1990 model with 300,000 original miles. Has 444 Cummins engine, 15 speed transmission, 46 rears. Recently had new head, pistons, rings, and New steer tires installed. Can be sold with or without a Pitts log trailer.
Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402
that go up and down, with airbags, Precision Chipper
feetDynamic a minute alsoChipper has CLT presses. '08
1987 model with 600,000 Miles. Has 400 Cummins engine, air ride suspension, rears, and all new drive Austin40Woods tires. Can be sold with or without a Pitts log trailer
94’
bells and whistles, its a production machine, with air strain conveyers
Phone: 888-401-6367 EXT 701
KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept
Item ID: 4849
Columbia, TN 38402-1916 (888) 401-6367
with 44 inch wheels, and all the
www.midatlantic-logging-biomass Contact: LIZ expo.com/ Email: Liz@lumbermensco.com
Contact: LIZ MID-ATLANTIC LOGGING & BIOMASS EXPO Email: Liz@lumbermensco.com Phone: 888-401-6367 EXT 701
DESIGN DIRECTOR
(888) 401-6367 ext. 703
feed deck 20 foot out feed deck
Escanaba, Michigan
Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx
Sam WallTruck 359 Peterbilt (888)Item 401-6367 ext. 702 ID: 7841 sam@lumbermens.co
has been rebuilt, it has a 24foot in
Precision Lower Pipe 1000 hrs, 425 hp Volvo Engine, MID-ATLANTIC LOGGING & BIOMASS Transfuild Clutch, Remote Control, Rev Fan, 25ft Stacking conveyor, FixFri, 15 Precision pipe Septlower - Sat, 16 Sept hammer Va. area Brand new Selma, North Carolina
John Williams (888) 401-6367 ext. 701 j@lumbermens.co
EQUIPMENT REPS
10 hours on this machine since it
72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept 2011 Dynamic
MARKETING DIRECTOR
May be sent to morris@lumbermens.co
Danckaert Band Resaw - Roughly
Hot Springs, Arkansas www.arkloggers.com
Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, Aspen Brush Chipper pallet makers, recyclers and Item ID: 14270 industrial woodworking plants inline 6 cylinder ford engine, 3165 hours, runs good, worldwide.
AD SUBMISSIONS
BANDMILLS & HEADSAWS
SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August
Corley Mfg .............................. 32
IntegrIty • PrecIsIon • CARRIAGES QualIty&•DRIVES Value 2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage
Woodmaster
See Detector's why we are your BeSt Metal Inc. .............. 30
with onboard log turners, carriage drive, hyd pac for carriage,
sawyers cab, computer controls,
cabinetfor with electronicblades! drives for Source bandsaw
carriage knees, husk including Midwest Sharpening .............. 26 welds We offer the highest quality and our people use the 48" bottom saw and 36" top saw Morhighest bark ..................................... level of integrity 9and precision to give you the best
bandsaw blades in the business—we ship all over the US. Multitek ................................... 12
STACKING thIn Kerf RAC Band saw Blades
CRD Metalworks .................... 25
Satisfaction13always guaranteed! Piper's Saw Shop....................
CW Mill-ArmorHog .............. 17
Rotochopper............................ 40
CW Mill-Hogzilla ................... 15
Row Electric ............................ 20
Dyna Products ........................ 35
Sawmill Exchange .................. 11
Empire Hydraulics ................... 8
Select Sawmill ......................... 19
Great Lakes Mfg. .................... 34
Smith Sawmill ........................... 4
Hahn Machinery ...................... 3 Miner Edger Item ID: 14228 Hurst Boiler ............................. 14
The Paul Bunyan Show ......... 39
Miner 3 blade edger with brand new 3 phase motor brand mandrel and Cummins 4B39 generator Ironnew Bull ................................... 21
Contact: MARK Kilgore Saw ............................. 22 Email: Mark@lumbermensco.com Phone: 888-401-6367 EXT 70824 Lignomat ................................. 702-875-2703
- USED FORESTRY EQUIPMENT FOR SALE
❘
M I S C E L L A N E O U S
FOR CLASSIFIEDS Item ID: 1187 Call 30 hp air cooled 4 cylinder wisconsin engine clutch bands need Model 30D10, entire 888.401.MENS operation includes knife grinder, to be replaced has parts work needs to be done there are 4 of 30ft leg dust collector, two cilos, open top trailers, dust them, aux lines, 5' bucket, quick attach, hand and foot controls, See and NY STATE WOODSMEN'S FIELD DAYS collector, blower unit, pictures, and Bagger. Oneprices, owner machine screened cab, late 70's early 80's machine 2667 Fri, 18 August - Sun, 20 AugustContact: AUSTIN Location of all equipment at Contact: MARK Boonville, New York Email: Austin@lumbermensco.com Email: Mark@lumbermensco.com www.LumberMB\ISmagazine.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 Phone: 888-401-6367 EXT 708 OR 702-875-2703 Item ID: 14271
W
Ite Co Ph
Ask About Our Dismanteling Blades
Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23
1-888-857-5153
www.BakerProducts.net
WoodMizer ................................ l ck Cheut Our Quality • Our O
SELL YOUR EQUIPMENT TODAY l§
❘
24/7 SUPPORT 0
Service Price 800.S48.6914 •I Our S73.663.7711 ❘
(888) 401-MENS L!
NO. 37
‘89
Ite Co
“Precision Under Pressure”
A D D I R EC TO RY
Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com
Air Systems Mfg. ................................... 11.......................... ......... 828-757-3500 Anson ....................................................... 2 ..................................... 800-663-7723 B & B Mfg. .............................................. 12.......................... ......... 800-654-5320 B. H. Payne ............................................. 18............................ ....... 404-761-8711 Baker ........................................................ 6, 11..................... ......... 800-548-6914 Bartlett Saw Service & Supply............ 23.......................... ......... 800-566-0319 Bell's Machining..................................... 12........................ ........... 888-995-1965 ‘16 Halverson H140 Item ID: 14077 Ben Jones Machinery ........................... 3 ..................................... 800-241-8983 Contact: Austin Skidsteer (DEMO) Buck Equipment (AIM) ......................... 25.......................... ......... 800-803-3365 Ph: (888) 401-6367 x703 Item ID:Mfg. JW-909632 Built-Rite ....................................... 27 ................................... 800-757-2520 Contact: J Williams Claussen All-Mark, Inc. ........................ 25.......................... ......... 800-252-2736 Ph: (888) 401-6367 x701 Corley Mfg .............................................. 35.......................... ......... 423-698-0284 CRD Metalworks. .................................. 4............................ ......... 888-667-8580 F&R Manufacturing .............................. 9............................ ......... 800-355-1250 Great Lakes Mfg. ................................... 8............................ ......... 877-248-5677 Great Lakes Timber Expo .................... 17 ................................... 715-282-5828 Hurst Boiler. ........................................... 21.......................... ......... 877-774-8778 James G. Murphy Auctions ................. 15 ................................... 425-486-1246 Kilgore Saw. ............................................ 37.......................... ......... 888-857-5153 Klug Korners........................................... 13.......................... ......... 800-471-5060 Lignomat ................................................. 29 ................................... 800-227-2105 Item ID: 13920 L-M Equipment Co. Ltd. ....................... 1 ..................................... 604-576-0088 Contact: Austin ‘13 KMC 2500 Track Menominee Saw.................................... 13.......................... ......... 800-582-0470 Ph: (888) 401-6367 x703 Skidder Metal Detectors, Inc............................. 6 ..................................... 541-345-7454 Mid-South Item ID: Forestry 14078 Equip. Show ...... 31 ............. www.midsouthforestry.org Midwest Sharpening ......... 231-924-5953 Contact: Austin ................... ........ 16.......................... capacity!. Item ID 13421. Sam x702 Multi tek.......................................... ......... 10.......................... ......... 800-243-5438 Ph: (888) 401-6367 x703 BARKO Northeast Implement, Inc. ......... ........ 13.......................... ......... 607-589-6160 1994 Barko 160B - Electric Ozark Industrial ............................ ........ 13.......................... ......... 877-266-8208 knuckleboom, 30' boom, 75hp off onto aAutomati conveyor. a very Pantron on,This Inc. is ........... ........ 38.......................... ......... 800-211-9468 Piper’s Saw Shop.......................... ......... 7............................ 800-845-6075 motor, Rotobec......... continuous well built processor. Item ID 13820. Row x702 Electric............................................ 16.......................... ......... 800-248-4479 grapple, 5,000 original hours. Sam Saw Control Systems............................ 40 ................................... 208-691-1732 (excellent condition.). Item ID Firewood Processor - This is Select Sawmill............................... ......... 14.......................... ......... 613-673-1267 13238. Chris x700 a Chomper Model 16 PDA Tajfun ....................................................... 19 .........................888-401-6367 x703 1995 Barko 775......... B Feller Buncher automatice firewood processor ........ 39.......................... TraxPlus .......................................... 601-635-5543 Pumps recently redone. 400 hrs with John Deere power unit with Universal Wearparts, Inc. .................... 33 ................................... 800-647-8440 Woodlandia ............................................ .........always 877-508-8777 on33................... injection pump. started low hours. Control panel includes 29,
‘93 Barko 180B
‘95 John Deere C6 Tree Farmer
13428 Victory Ln. // PO Box 124 Adams Center, NY 13606
,-soo-211-94&8 ‘05 Gehl CTL 70
‘83 John Deere 4850
Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good
condition. Easily produces high
quality chips with patented ‘Cone’ drum design. Can easily load 42’
Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701
PLEASE PRINT
chain conveyer, 8 way splitter, on
20,000lb goose neck trailer. Item ID 13916. Austin x703
Item ID 13644. Sam x702
FIREWOOD PROCESSORS
2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40
inch insert tooth circle saw, 30 foot 376 Issue 364
amp gauges. Cuts logs up to 16”.
good. in good working order. 22in
JULY 2018
kohing head. head works great.
If you need to Change your Address or
Item ID 13185. Sam x702then OneAdd owner Your and comes with all to our Name mailing list, 1999 Barko 160D new engine manuals and receipts. Purchased please complete this form and mail to: with new for $32,500. Item ID 13865.
approximately 1500 hours. Hour
- Small manufacturer in PA has
Lumbermens Magazine dont work. The last 2 owners Sam x702 P.O. Boxmeter 1916 have only used it to load trucks or LOGGING EQUIPMENT Columbia, TN 38402
Handles logs up to 32”. Uses
❑ Bandit Please ❑ Disc Please Change Please Remove delimber,❑ grapple has been rebuilt. 1999 1900Add Tracked
Best Value Portable Log Splitter made the best valued log splitter. 13HP Honda motor. Manual start
• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof -Has IP67 rated day. Item ID 13882. Austin x703 Log Lift. Uses 4-way wedge Not affected adjustable by vibration EDGERS &• GANGS to single two way. Great • 60k LUX Immunity toPA.sunlight Brewco Saws - Two Brewco Saws Value! Item ID 12062. Sam x702 in excellent condition. Runs great.
tach, oil pressure, water temp and
Firewood Processor - This is a
homemade processor with a 10’
log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power
unit. Has a 4’ chain saw that kicks
Lumbermens since 1986
❘
BANDIT
as a backup as needed. Has a CTR
*Company name and address process have your change. Boomto cylinders minor leaks. Chipper - Cat Under Carriage at required Company Name*: Item ID 13694. Sam x702 50% or better. 475________________________________________________________ hp Cummins
94 Barko 275 - Excellent value Diesel. 7500 Hours. One owner. Individual Name: _________________________________________________________ with low at hours at 3,500. 5.9 Well maintained. Item ID 13294. Address: ________________________________________________________________ Sam x702
CUMMINS continuous grapple.
_______________________________________________________________________
2004 Bandit Beast Model 4680 -
Runs Great!. Item ID 13740. Sam
City: ___________________________________________________________________
3412 Caterpillar Diesel engine
x702
BELL
State: __________________________________________________________________
with 850 HP. 5300 hrs. Mill in
good condition. Just finished 10
1990 Bell Super T - This Bell has
Zip:____________________________________________________________________
Phone: _________________________________________________________________ a brand new Duetz engine. Lever Acre clearing job, ready to work!
control, 33” bar, pump and tranny Remote control. Big production Email:__________________________________________________________________
List seLL exchange buy save
❘
LumbermensCO.com
NEW BARKO 495B
2015 BARKO 930
2007 CAT 525C
2011 DEERE 843K
2007 JOHN DEERE 843J
2010 TIGERCAT 720E
2013 CAT 525C
2014 JOHN DEERE 753J
2014 TIGERCAT 630E
2013 JOHN DEERE 643K
2013 JOHN DEERE 648H
2014 TIGERCAT 620E
2018 DELFAB DF703
2017 BARKO 595B
2014 TIGERCAT 620E
2014 TIGERCAT 720E
JEWELL CARRIER
2017 BARKO 930B
2006 HYDRO-AX 670
2015 JOHN DEERE 643L
2015 TIGERCAT 620E
THE LUMBERMENS MAGAZINE Post Office Box 1916 Columbia, Tennessee 38402
PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN
CUSTOMERS REPORT
10 PERCENT INCREASED PRODUCTION ON TWINS AND QUADS,
AN EXTRA SAW LINE
PER MINUTE ON CARRIAGES. WE HAVE 7 PATENTS STARTING 35 YEARS AGO... WITH NEW TECH ALWAYS AHEAD OF THE INDUSTRY.
NOW ON YOUTUBE SEARCH SAW CONTROL SYSTEMS
H REID SMITH SR CHIEF ENGINEER 208-691-1732 REID SMITH JR SALES AND INSTALLATIONS 435-754-7168
REDUCE DOWNTIME INCREASE THROUGHPUT INCREASE PROFITS WATCH THE SAW IN THE CUT REAL TIME DIAGNOSIS OF SAW BLADE AND MACHINE CENTER PROBLEMS INCREASE PRODUCTION WITHOUT SAW DAMAGE AUTOMATIC CONTROL OF FEED SPEEDS
www.sawcontrol.com