Lumbermens November 2020 Magazine

Page 1

F R E E

E Q U I P M E N T

L I S T I N G S November 2020 TM

pg.15 >>


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘93 Barko 180B

‘16 Halverson H140 Skidsteer (DEMO)

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Grapple Assist for crooked logs

2019 Cord King Line-up

Email: info@cordking.ca Web: www.cordking.ca

‘95 John Deere C6 Tree Farmer

Item ID: 13920 TOLL FREE 1-888-219-WOOD Contact: Austin ‘13 KMC 2500 Track (9663)

Ph: (888) 401-6367 x703

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

‘05 Gehl CTL 70Wedge and automatice firewood processor • splitter

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

Item ID: JW-986495 John Deere power unit with design towith suit your Contact: J Williams low hours. Control panel includes needs Ph: (888) 401-6367 x701

tach, oil pressure, water temp and 24 to 72 ton splitting amp gauges. Cuts logs up to 16”. capability chain conveyer, 8 way Onesplitting owner and comes with all • splitter, The on fastest 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased cycle time on the 13916. Austin x703 planet. new for $32,500. Item ID 13865.

Best Value Portable Log Splitter

Sam x702

Facts to consider:

- Small manufacturer in PA has

made the best valued log splitter.

LOGGING EQUIPMENT BANDIT

quality chips with patented ‘Cone’ Handles logs first up to 32”. Uses 1999 Bandit 1900 Tracked Disc 1. Pioneered N. America’s commercial firewood processor drum design. Can easily load 42’

13HP Honda motor. Manual start

Chipper - Cat Under Carriage at

day. Item ID 13882. Austin x703

Has Log Lift. Uses 4-way wedge

Diesel. 7500 Hours. One owner.

Brewco Saws - Two Brewco Saws

Value! PA. Item ID 12062. Sam x702

Sam x702

3 Bar models M1820, vans and2. produce 6 - 8saw loads per but available electronic option is available.M2030 50% orand better.M2430 475 hp Cummins

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. in the mid 70’s Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

3. 7 Slasher Model 40, 44, 44HO, 48, 54 with & 60 EDGERS & GANGS Saw Models adjustable Available to single two way. Great 36, Well maintained. Item ID 13294. low at hours at 3,500. 5.9

CUMMINS continuous grapple.

4. The Most productive machine on the planet, proven and guaranteed

in excellent condition. Runs great. Item ID 13644. Samto x702 5. Go our

Firewood Processor - This is a

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

3412 Caterpillar engine homemade processor with a video 10’ x702 web site for live action and detailsDiesel www.cordking.ca FIREWOOD PROCESSORS log deck. Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in BELL 6. Available with single joystick control 2010 Shop Built Wood Processor chain and kicker that all runs off good condition. Just finished 10 1990 Bell Super T - This Bell has - It has a 353 Detroit diesel, 40

of a 4 cylinder Mercedes power

Acre clearing job, ready to work!

a brand new Duetz engine. Lever

7. Exclusive lifetime splitter warranty and Remote 1 year bumper to bumper warranty. inch insert tooth circle saw, 30 foot control. Big production control, 33” bar, pump and tranny unit. Has a 4’ chain saw that kicks  Issue 364 392

Lumbermens™  since 1986

 List  seLL  exchange  buy  save

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

Field Proven Design for the Independent Hardwood Sawmill Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

2010 Cardinal HD Carriage

Carriages (Sawmill) - Cardinal

MAILING ADDRESS • Corley lnfeed and Edger with Lewis Optimization - Two proven Carriage line it includes carriage B & B Mfg. ............................... 18 M&F Gauge ............................. 28 P.O. Box 1916 with onboard log turners, carriage Columbia, TN 38402-1916 names with proven results B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 drive, hyd pac for carriage, (888) 401-6367 Menominee Saw ..................... 29 Baker ...................................... 5, 7 sawyers cab, computer controls, AD SUBMISSIONS • True Hardwood Optimization May be sent to­ cabinet with electronic drives for Bell's Machining ..................... 27 Metal Detector's Inc. .............. 30 morris@lumbermens.co carriage knees, husk including • Small footprint that fitsMfginside most existing Brute Force . ..................... 31 Midwest Sharpeningmills .............. 26 POSTMASTER 48" bottom saw and 36" top saw Buck Equipment (AIM) ........ 36 Morbark ..................................... 9 address changes to: • Send Value priced with all of the optimization capability of more Lumberman's Exchange Corley Mfg .............................. 32 Multitek ................................... 12 P.O. Box 1916 elaborate Edger Optimizers Columbia, TN 38402high speed CRD Metalworks .................... 25 Piper's Saw Shop.................... 13

STACKING For more information on our new "M" Series RAC Edger and other Corley and Lewis products, give us a call.

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

CORLEY SAWMILL MACHINERY

Chattanooga, Tennessee Iron Bull ................................... 21

Kilgore Saw ............................. 22 Phone 423-698-0284 Lignomat ................................. 24 www.corleymfg.com

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

LEWIS CONTROLS OPTIMIZATION Cornelius, Oregon

Union Grove Saw & Knife.. 2, 37

Phone 503-648-9119

Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

www.BakerProducts.net

www.lewiscontrols.com 800.S48.6914 I S73.663.7711

 24/7 SUPPORT 0 SUPPORT

❘ L!  (888) 401-MENS 401-MENS

NO. 3


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


PleAse PrINt

blades and 1 spare 36" blade),

❑ Please Remove

** CALENDAR**

where to order included. Item ID 12846. Sam x702

Zip

cuts from sawline, log stop and

loader to drop logs onto carriage,

Precision 58 Chip Pac - Single chute

stop and loader to deal with big

Sam x702

loading system,. Item ID 12764.

heavy duty log turner under log logs onto carriage and track and

State

frame. Significant new spare parts

to be negotiated separately. Item ID

Email

TM

FOR CLASSIFIEDS CHIPPERS Call 888.401.MENS LIST SELL EXCHANGE BUY SAVE EST 1986 See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Location of all equipment at of Boonville, New York www.LumberMB\ISmagazine.com DealS the Month belted rollcase to clear slabs and

13198. Sam x702

Manual Four Head Block - Manual www.starwebhosting.net/woodsmen/

From TA ApriL BLE

chipper that has been totally rebuilt with about 840 hours except for the V-12 Caterpillar power unit. New clutches, disc, bearing, liners and

custom chute. 23” in opening and V-12 Cat with 750-800 hp rating.

all steel carriage. Husk. Manual

Danckaert Band Resaw - Roughly

Fri, 25 August - Sat, 26 August

DEPARTMENTS

Trelan Chipper - This is a remote

OF C O N T E NBANDMILLS T S & HEADSAWS FOREST PRODUCTS EXPO Four Head Block Mounted on

'12 WoodmIzer LT 40 SOUTHWEST

City

❑ Please Change

Pulleys on Bearing . Parts Book and

short pop-up transfer to edger,

EquipmEnt REpREsEntativEs

The Tree that Started it All!

EST on this 1986 10 hours machine since it Hot Springs, Arkansas cAll uS todAy foR All youR uSed www.arkloggers.com equiPMent hasneedS! been rebuilt, it has a 24foot in

feed deck 20 foot out feed deck Safety Alert............................................... 672ND ANNUAL GREAT LAKES fREE EquipmEnt listings! Call –

❑ Please add

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

L I S T with S E L44 L inch E X C Hwheels, ANGE B and UY S A Vthe E all LOGGING & HEAVY EQUIPMENT EXPO 401-6367 (888) Thurs, 7 Sept - Sat, 9 Sept bells and whistles, its a production

Phone

Address

Individual Name

Company Name*

LIST SELL EXCHA BUY SMichigan AVE Inspirational Thoughts............................ 7N G E Escanaba, Morris Woods item id: 14061 contact: Austin x703

EST 1986 AD Sales MID-ATLANTIC LOGGING & BIOMASS 2012 JoHn deere (888) 401-6367 548G3 Fri, 15 Sept - Sat, 16 Sept

Deals PUBLISHER of the Month................................. 15 *Company name and address required to process your change.

If you need to Change your Address or Add Your Name to our mailing list, then please complete this form and mail to:

Woods Publishing

ADVERTISING SALES

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North CarolinaExt. 704 www.midatlantic-logging-biomass­ morris@lumbermensco.com expo.com/

Ad Directory........................................... 38 Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR

P.O. Box 1916 Columbia, TN 38402

Lumbermens Magazine

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Reduced PRice item id: 14021 contact: Sam x702

FAbTeK 344b

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

item id: 14061 contact: J Williams x701

chris Woods Phone: (888) 401-6367 ext. 700 chris@lumbermens.co

Sam Wall Lexington, Kentucky http://www.kfia.org/ (888) 401-6367 KentuckyWoodExpo.aspx Ext. 702

THE PAUL BUNYAN SHOW sam@lumbermensco.com Fri, 6 Oct - Sun, 8 Oct

sawmilling, palletADDRESS manufacturing, and secondary wood manufacturing MAILING industry, is free within qualifying manufacturers B & to B Mfg . ............................... 18 P.O. Box 1916the United States andColumbia, industry suppliers. Please limit your subscription to one free copy TN 38402-1916 B. H. Payne .............................. 16 per company mill location. (888)or401-6367

Baker ...................................... 5, 7 CHANGE ADDRESS: Send address changes to Lumbermens™ AD OF SUBMISSIONS Magazine, W. to­ 7th St., Ste. 297, Columbia, TN 38401. When May1116 be sent Bell's Machining ..................... 27 possible, please include an old address label. morris@lumbermens.co Brute Force Mfg. ..................... 31 REPRODUCTION AND RESPONSIBILITY: Advertisers are responsible POSTMASTER for Send the contents claims to: of their advertising. Lumbermens™ Buck Equipment (AIM)accepts ........ 36 addressand changes no responsibility their claims. No part of this publication may be Lumberman'sforExchange Corley 32 reproduced orBox transmitted in any form or byMfg any.............................. means, electronic P.O. 1916 or mechanical, including photocopying, recording or any information Columbia, TN 38402 CRD Metalworks .................... 25 storage retrieval system, without permission of Lumbermens™. The Lumberman's Exchange Mill-ArmorHog ..............in 17 Negatives, artwork, and isother itemsCW submitted for publication published monthly Woods Lumbermens™ arebythe property of advertiserQs. Lumbermens ™ owns CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, material typeset and/or designed by Lumbermens ™ and reserves the Columbia, TN 38402. All rights right to its use outside of Lumbermens™. Lumbermens™ will exercise Dyna Products ........................ 35 reserved. All editorial/ advertorial every precaution in at writing, designing, and printing material contained submissions are used the Empire Hydraulics ................... 8 within. We not be liable for omissions or typographical errors. discretion of shall the publisher and may be edited for purposes of clarity Great Lakes Mfg. .................... 34 and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

Cambridge, Ohio www.ohioforest.org

Austin Woods Phone: (888) 401-6367 ext. 703 austin@lumbermens.co

Walker Woods

** INFO LINK**

Austin Woods  Issue 364 lumbermenS  Since 1986 ❘  liSt  Sell  (888) 401-6367 ext. 703 austin@lumbermens.co SUBSCRIPTION: Lumbermens™, a trade newspaper for the logging,

(888) 401-6367

exchange  buY  Save

Ext. 707

walker@lumbermensco.com

M&F Gauge ............................. 28 Meadows Mill, Inc. ................ 33

it(888) includes401-6367 two sets of Mcdonough

pressure guides. Top Casting wheel Ext. 700 ischris@lumbermensco.com supported on both sides. This

is an extremely accurate machine Morris Woods, Ad Sales morris@lumbermens.co feet a minute also has CLT presses.

Austin Woods Item ID 13876. Austin x703 S (888) & W 125401-6367 Band Mill with

Caterpillar generator - Low hours Ext. 703

on the mill, electronic computer Set austin@lumbermensco.com

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam Wall

Phone: (888) 401-6367 Sam Joex702 Ferrazzano ext. 702

CARRIAGES & DRIVES (888) 401-6367

sam@lumbermens.co

2010 Cardinal HD Carriage

 lumbermenSmagazine.com

Ext. 709

Carriages (Sawmill) - Cardinal joe@lumbermensco.com

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Menominee Saw ..................... 29

sawyers cab, computer controls,

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Midwest Sharpening.............. 26

carriage knees, husk including

Morbark ..................................... 9

48" bottom saw and 36" top saw

STACKING The Tree that StartedRAC it All!

Multitek ................................... 12

Piper's Saw Shop.................... 13

Rotochopper............................ 40

Row Electric ............................ 20

Sawmill Exchange .................. 11 Since 1986, Lumbermens™ has published a monthly circular Select Sawmill ......................... reaching sawmills, loggers,19 pallet makers, recyclers and industrial woodworking plants worldwide. Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

PUBLISHER The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union GroveTed Saw & Knife.. 2, 37 Monnin

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

1116 W. 7th St.,................................ Ste. 297 • Columbia, TN 38401 WoodMizer l

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Chris Woods

that go up and down, with airbags,

Phone: (888) 401-6367 in ve1y good condition, Cuts 130 ext. 704

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

For classifieds Call toDay (888) 401-6367

machine, with air strain conveyers

Woods Publishing

DESIGN DIRECTOR

MAILING ADDRESS

 SELL YOUR EQUIPMENT TODAY TODAY l§

(888) 401-6367

 24/7 SUPPORT 0 SUPPORT

AD SUBMISSIONS May be sent to— morris@lumbermensco.com POSTMASTER Send address changes to: Lumbermens™ Magazine www.BakerProducts.net 1116 W. 7th St., Ste. 297 • Columbia, TN 38401

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 5


“Precision Under Pressure”

SAFETY ALERT

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

Train Smashes into Compost Spreader Truck BACKGROUND On a summer morning in the eastern U.S., a compost spreader truck was driving from a pulp mill to its compost spreading site on the other side of a railroad crossing. A train was approaching the crossing. The weather was not a factor in this incident.

‘95 John Deere C6

PERSONAL CHARACTERISTICS Farmer The driver of the truck was a trainee in his first week performing this task, and the passenger was servingTree as the trainer. The two had been taking turns driving for several days. Both individuals had been working with their employer for slightly over a year. Neither received documented Item ID: 13920 training procedures, but the trainer had been trained to stop, look, and listen before crossing2500 the railroad tracks. Contact: Austin ‘13 KMC Track Ph: (888) 401-6367 x703 UNSAFE ACTS AND CONIDITIONS Skidder The trainer did not share the “stop, look, and listen” procedure with the trainee, nor did he set that example when driving himself. When the Item ID: 14078 trainee began crossing dual setBox of railroad tracks, the windows were rolled up. This made it harder to hear the train horn, which was blowing before 13428 Victory Ln.a // PO 124 Contact: Austin and after Adams the trainCenter, became visible. The driver briefly looked both ways prior to entering the track right-of-way but simply rolled slowly the capacity!. Item ID 13421.through Sam x702 NY 13606 Ph: (888) 401-6367 x703 stop sign. This slow, “rolling stop” was a habit they had fallen into. BARKO Although the train was visible when the truck entered the crossing, the sight distance was not particularly long due to a gradual track curve 1994 Barko 160B - Electric and the surrounding forest. This low-use private crossing did not have automatic safety features such as crossing gates or lights installed. The truck knuckleboom, 30' boom, 75hp off onto a conveyor. This is a very was loaded, heavy, and operating slowly in a low gear. well built processor. Item ID 13820.

motor, Rotobec continuous

ACCIDENT grapple, 5,000 original The driver and the trainer realized the train was about to hit them,Sam but x702 it was too late to exit the vehicle. The train struck the hours. truck on the Firewood - Thisitisalong and narrowly (excellentavoiding condition.). Itemtower ID 50 passenger side near the front of the tandem rear wheels, folding the truck up against theProcessor train, pushing a metal feet further down the tracks. The truck was then forced off the tracks and into a field alongside the right-of-way. The train struck the truck at a speed 13238. Chris x700 a Chomper Model 16 PDA of 32 mph; the railroad speed limit for ‘05 that area of track was70 35 mph. Gehl CTL 1995 Barko 775 B Feller Buncher automatice firewood processor

Item ID: JW-986495 INJURY with John Deere power unit with - Pumps recently redone. 400 hrs Contact: J Williams The passenger sustained a broken nose, an arm injury, and lacerations that required stitches. The driver received bruises andalways scratches. The on injection pump. started low hours. Control panel includes Ph: (888)were 401-6367 x701 to escape with their lives. spreader truck was a total loss. Both individuals very fortunate

‘83 John Deere

tach, oil pressure, water temp and

good. in good working order. 22in

RECOMMENDATIONS FOR CORRECTION kohing head. head works great. amp gauges. Cuts logs up to 16”. • 4850 Remove vegetation along the tracks to improve sight distance and visibility. Item ID 13185. Sam x702 conveyer, 8 way splitter, on One owner and comes with all ID:training 14073procedures specificchain • Item Improve to railroad crossings; study and training should include a review of this incident and the safety information 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased 1999 Barko 160D - new engine with Contact: provided Austin by the railroad. for $32,500. ItemDo ID not 13865. approximately 1500 hours. Hour Austin obey x703 the “stop, look, andnew (888) 401-6367 x703 safety13916. • Ph: Never ignore railroad crossing procedures; listen” instruction! take the potential for a collision lightly, even if the odds seem low! Best Value Portable Log Splitter meter dont work. The last 2 owners Sam x702

LOGGING EQUIPMENT BANDIT

have only used it to load trucks or

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

with 1700 hours, in very good

- Small manufacturer in PA has

quality chips with patented ‘Cone’

condition. Easily produces high

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 392

made the best valued log splitter. 13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

as a backup as needed. Has a CTR Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


** CALENDAR**

CLASSIFIEDS NEXT TIME YOU’RE FOUND WITH YOUR CHIN ON THEFOR GROUND Call 888.401.MENS THERE’S A LOT TO BE LEARNED, SO LOOK AROUND See pictures, prices, and NY STATE WOODSMEN'S FIELD DAYS Just what makes that little old ant think he’ll move-that Fri, 18 August Sun,RUBBER 20 AugustTREE PLANT, Location of all equipment at Boonville, New TREE York PLANT Anyone knows an ant can’t move a RUBBER www.starwebhosting.net/woodsmen/

www.LumberMB\ISmagazine.com

BANDMILLS & HEADSAWS

SOUTHWEST FOREST PRODUCTS EXPO But he’s go high hopes, he’s got high hopes, He’s got high apple pie in the sky hopes The Tree that Started it All!

Fri, 25 August - Sat, 26 August

Danckaert Band Resaw - Roughly

10 hours on this machine since it Hot Springs, Arkansas of lettin’ go, Just remember thathas ant,been rebuilt, it has a 24foot in So any time you’re getting low ‘steadwww.arkloggers.com

Oops there goes another Rubber Tree Plant,

feed deck 20 foot out feed deck 72ND ANNUAL GREAT LAKES with 44 inch wheels, and all the Since 1986, Lumbermens has LOGGING & HEAVY EQUIPMENT EXPO published a monthly circular Thurs, 7 Sept Sat, 9 Sept bells andcould whistles, its a production When Troubles call, and your back’s against the wall, there’s a lot to be learned, that wall fall

reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants Once worldwide.

PUBLISHER

Escanaba, Michigan

machine, with air strain conveyers

that go up and down, with airbags, there was a silly old ram, Thought he’s punch a&home in a dam, MID-ATLANTIC LOGGING BIOMASS 15 Sept Sat,buttin’ 16 Septthat dam it includes two sets of Mcdonough No one could make that Ram,Fri, scram, He -kept

pressure guides. Top Casting wheel Selma, North Carolina www.midatlantic-logging-biomass­ is supported on both sides. This MID-ATLANTIC ADVERTISING SALES Cause he had high& BIOMASS hopes,EXPO he had high hopes, expo.com/ He had apple pie in the skyishopes LOGGING an extremely accurate machine Woods Publishing

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co So

KENTUCKY WOOD EXPO

in ve1y good condition, Cuts 130

http://www.kfia.org/ KentuckyWoodExpo.aspx

S & W 125 Band Mill with

a minute also has CLT presses. any time you’re feeling bad ‘steadFri, of 15 feeling Just that feet Ram, Sept sad - Sat, 16remember Sept MARKETING DIRECTOR Item ID 13876. Austin x703 Opps there goes a billion kilowatt dam Lexington, Kentucky John Williams (888) 401-6367 ext. 701 j@lumbermens.co All problems

DESIGN DIRECTOR Donna Heninger

just a toy balloon they’ll be busted soon, they’re just bound Caterpillar to pop, generator - Low hours on the mill, electronic computer Set THE PAUL BUNYAN SHOW Oops there goes another problem kerplop! Fri, 6 Oct - Sun, 8 Oct

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

SHRINK WRAP Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

**

FIREWOOD/WASTEWOOD INFO

MAILING ADDRESS

Cambridge, Ohio www.ohioforest.org

works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Sam x702

LINK**

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36

Sell Your WOOD – $300/cord More! 32 Corley Mfgor ..............................

Morbark ..................................... 9

profits byMetalworks shrink wrapping CRD .................... 25 wastewood firewood with WOOD-PAKER! The Lumberman's Exchange is CW Mill-ArmorHog .............. 17 published monthly by Woods size packages can be obtained Attractive various CW Mill-Hogzilla ................... 15 Publishing, P.O. Box 1916, withTNour high production, easily operated and Columbia, 38402. All rights Dyna Products ........................ 35 reserved. All editorial/ advertorial Eight machines available. affordable machines. submissions are used at the Empire Hydraulics ................... 8 The ideal equipment for producing square bundles discretion of the publisher and may be edited for purposesfor of clarity palletizable ease in storage and transporting. Great Lakes Mfg. .................... 34 and space. Although all efforts have Inquire details. Hahn Machinery ...................... 3 been made to ensure accuracy of for free

Piper's Saw Shop.................... 13

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, 38402 Double orTN triple your

content submitted by advertisers & B Manufacturing • 3007 West River Road • Olean, NY 14760 14 Hurst Boiler ............................. andBwriters, the Lumberman's Exchange, its principles and Iron Bull ................................... 21 associates, are not held liable for errors or omissions. Reproduction, Kilgore Saw ............................. 22 in whole or part, is prohibited with­ E-mail:consent. bbmfg@verizon.net • Web:Lignomat www.thewoodpaker.com ................................. 24 out written ©2017 Woods Publishing

716-373-5881

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Multitek ................................... 12 Rotochopper............................ 40 Row Electric ............................ 20 Sawmill Exchange .................. 11

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

Sch Gr

Ite Co Ph

Select Sawmill ......................... 19 Smith Sawmill ........................... 4 The Paul Bunyan Show ......... 39 Thomas Industrial Controls..... 10 Union Grove Saw & Knife.. 2, 37 Universal Refiner ................... 23 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 7

20 53

Ite Co Ph


40

used

or a

02

00

t

02

r

y

wer

w

ill

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6

LIST • SELLFarmer • EXCHANGE • BUY • SAVE Tree

PIPER’S Saw Shop

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

5 7 0 6 • 5 4 8 • 800

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

Promotional Pricing Offer

Simonds Red Streak Hard BackCTL 70 ‘05 Gehl 1-1/4” x .042 x 3/4” or 7/8” Item ID: JW-986495 L im it e d Length 13’2”Contact: J Williams

‘83 John Deere $14.27 4850 $14.71

Ph: (888) 401-6367T x701 im e

each

O n ly

Tell us you saw it here! chain conveyer, 8 way splitter, on

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

22X380, direct drive, EROPS,

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

To Sell Your Equipment!!

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

888-401-6367

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

Lumbermensco.com

kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 Issue 364 1986 392 Lumbermens List exchange itbuy  to save arch with winch. Low hours on ™  since Cat D5B Dozer❘ - Cat D5B s/n seLL  come hook up to and go your this skidder at only 3700. These

CALL US TODAY

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

job site and put it to work to up

a brand new Duetz engine. Lever

 LumbermensCO.com


** The Tree that Started it All!

Options to Choose From!

BELL’S FIREWOOD PROCESS FOR CLASSIFIEDS BELL’S FIREWOOD PROCESSORS BELL’S FIREWOOD PROCESSORS CALENDAR**

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

•• Sturdy HSS Steel 4’ Diameter BarrelWelded machine, with air strain conveyers • 4’ Clean Out Chute • Diameter Barrel FIREWOOD TUMBLER Many Models &• Clean Removes Debris & Bark as large as 2 ¼” • Sturdy HSS SteelTUMBLER Welded• FIREWOOD Out Chute that go up and down, with airbags, • Sturdy HSS Steel Welded Works withDebris all of our Double Made In • 4’ Diameter Options toBarrel Choose From! MID-ATLANTIC LOGGING & BIOMASS •• Removes & Bark aschain largeHydraulic as 2 ¼” • 4’ Diameter Barrel • Optional Honda Power Pack Available • Clean Out Chute it includes two sets of Mcdonough Canada • Works with all of our Double chain Hydra Please Call for Details • Clean Out Chute Fri, 15 Sept - Sat, 16 Sept • Removes Debris & Bark as large as 2 ¼” • Removes Debris & Bark as Optional large Made In as 2 ¼”guides. • HondaTop Power Packwheel Available pressure Casting • Works with allwith of all our Double chain Hydraulic Lift conveyors • Works of our Double chain Hydraulic Lift conveyors Selma, North Carolina Canada Optional Honda Power Pack Available FIREWOOD TUMBLER • Optional• Honda Power Pack Available www.midatlantic-logging-biomass­ is supported on both sides. This HSS online Steel Welded or• Sturdy visit us expo.com/ • 4’ DiameterisBarrel an extremely accurate machine www.bellsmachining.com • Clean Out Chute FIREWOOD TUMBLER • RemovesAvailable Debris & Bark as condition, large as 2 ¼” in ve1y good Cuts 130 Financing KENTUCKY WOOD EXPO • Works with all • of Sturdy our Double HSSchain SteelHydraulic Welded Lift conveyors Made In Please Call for Details feet a minute also has CLT presses. Power Pack Available Fri, 15 Sept - Sat, 16 Sept • Optional Honda • 4’ Diameter Canada Barrel

Escanaba, Michigan

Many Models & Options to Choose From! 1-888-995-1965

Woods Publishing

MARKETING DIRECTOR

Call 888.401.MENS See pictures, prices, and Many Models &Location of all equipment at www.LumberMB\ISmagazine.com Options to Choose From! 4000 SER BANDMILLS & HEADSAWS

Many Models Models && Many Options to Choose From! Options to Choose From! • 30 TonMany SplitterModels & • Works withfeed all ofdeck our Double Hydraulic 20 foot chain out feed deck Lift convey 72ND ANNUAL CylinderGREAT LAKES • Optional Honda Power Pack Available Options to Choose From! with 44 inch wheels, and all the LOGGING & HEAVY EQUIPMENT EXPO Many Models & FIREWOOD TUMBLER Made In TUMBLER Canada to Choose From! FIREWOOD • Sturdy Steel Welded Thurs, 7 Sept - Sat,Options 9 Sept bells andHSS whistles, its a production

PUBLISHER

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

4000 SERIE

4000 SERIES

• 67 HP CAT Diesel • 44” Circular Engine Saw Many Models & 44” Circular Saw • 20”• Diameter • 20” Diameter Capacity Options to Choose From! • 67 HP CAT Diesel 4000 SERIES Capacity • Single Joystick FIREWOOD TUMBLER Engine • Single Joystick Control NY STATE WOODSMEN'S FIELD DAYS • 44” Circular Saw • Sturdy HSS Steel Welded Control • 30 Ton Splitter • 20” Diameter • 30 Ton Splitter Fri, 18Diameter August Sun, 20 August FIREWOOD TUMBLER • 4’ Barrel Cylinder Capacity Cylinder • Sturdy HSS Steel Welded Boonville, New York • 67 HP CAT Diesel • Single Joystick 4000 SERIES • CleanEngine Out Chute • 4’ Diameter Barrel Controlwww.starwebhosting.net/woodsmen/ • 67 HP CAT Diesel • Clean Out ChuteSERIES • 44” Circular Saw • Removes Debris & Bark as large as 2 ¼”4000 • 67 HP CAT Diesel • 30 Ton Splitter Engine • 20” Diameter • Removes Debris & Bark as large as 2 ¼” Cylinder Engine Capacity •• Works with of our Double Lift 44” Circular Saw allPRODUCTS Works with all of our conveyors Double chain Hydraulic SOUTHWEST FOREST EXPOchain•Hydraulic ••Single 44”Joystick Circular Saw • 20” Diameter • Optional Honda Power Pack Available TUMBLER Control Honda PowerFIREWOOD • Optional Pack Available Danckaert Band Resaw - Roughly Fri,Capacity 25 August - Sat, 26 August Diameter ••30 20” Ton Splitter • Sturdy HSS Steel Welded • Single Joystick Cylinder CapacityArkansas • 4’ Diameter10Barrel hours on this machine since it Hot Springs, Control • Single Joystick • Clean Out Chute www.arkloggers.com • 30 Ton Splitter has been rebuilt, it has a 24foot in Control • Removes Debris & Bark as large as 2 ¼” Cylinder

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

ADVERTISING SALES

• Single Joystick Control • 30 Ton Splitter • 67 HP CAT Diesel Cylinder Engine

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Please Call for Details

• Clean OutAustin Chute x703 ID 13876. 1-888-995-1965SItem • Removes Debris & Bark as large as 2 ¼ & W 125 Band Mill with

1-888-995-1965

Made In

Canada Lexington, Kentucky In http://www.kfia.org/ Made Canada or visit us online KentuckyWoodExpo.aspx

Made In Canada

• Works with all of our Double chain Hyd • Optional Honda Power Pack Available Caterpillar generator - Low hours

or visit us online www.bellsmachining.com Please CallPlease for Details Call for Details THE PAULFinancing BUNYAN SHOW Available on the mill, electronic computer Set 1-888-995-1965 works,1 1/2" or 2" band, 22ft. track www.bellsmachining.com 1-888-995-1965 Fri, 6 Oct Sun, 8 us Oct Please Call-for orDetails visit onlineCall for Details Please Cat 3406 140KW Genset, 12,400 Cambridge, Ohio or visit us online www.bellsmachining.com Financing Available 1-888-995-1965 www.ohioforest.org Financing Available Made In Canada

1-888-995-1965

hours ready to run. Item ID 13434. www.bellsmachining.com or visit us onlineFinancing Available Sam or visit us onlinex702 Made In www.bellsmachining.com Please Call for Details Canada CARRIAGES & DRIVES www.bellsmachining.com Financing Available

** INFO LINK**

1-888-995-1965 2010 Cardinal HD Carriage Financing Available

or visit us online Carriages (Sawmill) - Cardinal www.bellsmachining.comCarriage line it includes carriage Financing Available B & B Mfg. ............................... 18 M&F Gauge ............................. 28 Please Call forwith Details onboard log turners, carriage drive, hyd pac for carriage, 1-888-995-1965

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

Brute Force Mfg. ..................... 31

sawyers cab, computer controls, or visit us online cabinet with electronic drives for Metal Detector'swww.bellsmachining.com Inc. .............. 30 carriage knees, husk including Midwest Sharpening .............. 26 Available Financing

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Bell's Machining ..................... 27

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 9


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

30+ Years Strong!

‘16 Halverson H140 Skidsteer (DEMO) From Price To Performance, We’re A Cord Above The Rest!

NEW

Auto Saw Tensioner

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

888-SPLITTER (888-775-4883)

blockbuster-inc.com

100

WWW.TREETRADER.COM ~ The World’s

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder

Portable • DePenDable • low Maintenance

off onto a conveyor. This is a very

‘05 Gehl CTL 70

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

a Chomper Model 16 PDA

13238. Chris x700

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and

‘94 Caterpillar One owner and comes with all 320

amp gauges. Cuts logs up to 16”. manuals and receipts. Purchased

Item ID: 13936 new for $32,500. Item ID 13865. Contact: Austin Sam Ph:x702 (888) 401-6367 x703

LOGGING EQUIPMENT BANDIT

but electronic option is available.

are 30.5’s at 55% at 80%. 50% or better. 475and hp one Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off

unit. Has a 4’ chain saw that kicks ❘

capacity!. Item ID 13421. Sam x702

grapple, 5,000 original hours.

4000 Bandit hours. Torque convertor 1999 1900 Tracked Disc

Lumbermens™  since 1986

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

Sam x702

Handles logs up to 32”. Uses

of a 4 cylinder Mercedes power

Ite Co Ph

wellWebsite built processor. Item ID 13820. motor, Rotobec continuous Largest For The Tree & Landscape Industry Firewood Processor - This is

‘83 John Deere 4850

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

19 44

 Firewood Processors: 8 Models  Firewood Cleaners  Firewood Conveyors: 12’, 20’ & 30’  Operator’s Cabs  Firewood & Log Grapples  Free DVD

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606 319-986-5525 Local • 2756 Kentucky Ave, Mt Pleasant, IA

‘93 Barko 180B

transmission. hole Carriage wheels. Tires Chipper - Cat 14 Under at Diesel. 7500very Hours. owner. Center has littleOne slack. This

Well maintained. 13294. skidder has been aItem backIDup skidder Sam x702 for the several years. Skidder has 2004 4680 12000Bandit hours.Beast Item Model ID 13805. Sam 3412 x702 Caterpillar Diesel engine

with 850 HP. 5300520 hrs. Mill hard in to 1981 Timberjack - Very good Just finished 10 come condition. by! 653 Detroit. Runs Great!.

Acre clearing ready Item ID 13741.job, Sam x702to work! Remote control. Big 2002 Timberjack 608sproduction with hot saw

- Approx. 6000 hours, Machine is  List  seLL  exchange  buy  save  Issue 364

(excellent condition.). Item ID 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in

kohing head. head works 440D great. ‘88 John Deere Item ID 13185. Sam x702

Skidder

58 Ch

Ite Co Ph

1999 Barko 160D - new engine with Item ID: 13781

Rem

Ph: (888) 401-6367 x702 meter dont work. The last 2 owners

Spee

approximately 1500 hours. Hour Contact: Sam

Equ

have only used it to load trucks or in very goodasshape andHas has abeen as a backup needed. CTR

40%

Sam x702 Boom cylinders have minor leaks.

Har

well maintained. ID 12194. delimber, grappleItem has been rebuilt. ‘98 Timberjack 1270Bx702 - 7,300 hrs. Item ID 13694. Sam 94 Barko6275 - Excellent value Perkins Cylinder Engine. All

with low and at hours at 3,500. modules computer are5.9 brand CUMMINS grapple. new. Tires oncontinuous average are around

Runs Great!.http://youtu.be/R_ Item ID 13740. Sam 80% Video: x702 MQZe5QEFw. Item ID 13572. Chris

BELL x700 1990 Bell Super T - This Bell has VALMET

a1998 brand new 603 Duetz engine. Lever Valmet 3-Wheeled control, bar,hours pumpon and tranny Buncher33” - 6500 total

machine but no hours on 4BT3.9 ❘  LumbermensCO.com

Lumbermens  since 1986

mac

main

of co

avai

Item

2005

Forw

hyd box

2012

pum

cond

hou

 List  seLL  exch


** CALENDAR**Innovative

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and NY STATE WOODSMEN'S FIELDClean-Burn DAYS Design Fri, 18 August - Sun, 20 August Location of all equipment at Boonville, New York www.LumberMB\ISmagazine.com www.starwebhosting.net/woodsmen/

The Tree that Started it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

SOUTHWEST FOREST PRODUCTS EXPO Manufacturing a full line of Fri, biomass fired 25 August - Sat, 26 August

combustion systems backed with fifty years of Hot Springs, Arkansas innovative clean-burn design. Diverse inwww.arkloggers.com every way with multi-fuel blending capability. Hurst stokers utilize hundreds of common and 72ND ANNUAL GREAT LAKES abundant solid biomass fuels. LOGGING & HEAVY EQUIPMENT EXPO Large or small scale, project Thurs, 7 Sept - Sat, 9 Sept management is eased with the Escanaba, Michigan impressively short installation time required with prefabricated MID-ATLANTIC LOGGING & BIOMASS modular components.

Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

DESIGN DIRECTOR

MID-ATLANTIC

LOGGING & BIOMASS EXPO

Rotary Dryers Sand Dryers Grain Dryers Lumber Kilns Cement Kilns Brick Kilns

Donna Heninger

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703

50

S & W 125 Band Mill with

Caterpillar generator - Low hours on the mill, electronic computer Set

works,1 1/2" or 2"YEARS band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 3-5 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 11


Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

IntegrIty • PrecIsIon • QualIty • Value “Precision Under Pressure”

Woodmaster See why we are your BeSt Source for bandsaw blades! We offer the highest quality welds and our people use the highest level of integrity and precision to give you the best bandsaw blades in the business—we ship all over the US. Satisfaction always guaranteed!

thIn Kerf

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Wood-Mizer LT40

‘93 Barko 180B

Item ID: 14077 Contact: Austin 84/85 Deere Ph: (888)John 401-6367 x703

440B/C

Item ID: 13908 Contact: Sam Ph: (888) 401-6367 x702

Item ID: 13995 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer

Band saw Blades

‘05

Ite Co Ph

Item ID: 13920

Ask About Our Dismanteling Blades

LUMBERMEN’S

13428 Victory Ln. // POEquipment Box 124 Adams Center, NY 13606 Digest

1-888-857-5153

ck Cheut Our O

Quality • Our Service • Our Price

Contact: Austin ‘13 KMC 2500 Track Ph: (888) 401-6367 x703 Skidder LUMBERMEN’S Equipment Digest PO Box 1146

Item ID: 14078 Columbia, TN 38402-1146 Contact: Austin 1-800-477-7606 Fax (931) 388-3564 capacity!. ItemSuper ID 13421. Sam ‘90 Bell T x702 Ph: (888) 401-6367 x703 www.lumbermenonline.com BARKO Item ID: 13896 Contact: Sam- Electric 1994 Barko 160B Ph: (888) 401-6367 knuckleboom, 30' boom,x702 75hp off onto a conveyor. This is a very

‘89 Timberjack 380A well built processor. Item ID 13820. Item ID: 14039 Sam x702 Contact: Austin Firewood Processor - This is Ph: (888) 401-6367 x703

PROTECT Them ALL ‘05 Gehl CTL 70 ‘10®Shop Built With Pro-Tec-ToWoodWrap Processor ‘83 John Deere a Chomper Model 16 PDA

automatice processor 13799. Sam firewood x702 Item ID: JW-986495 with John Deere power unit with 1998 Hydro Ax 611EX Saw Head Contact: J Williams low hours. Control panel includes Feller Buncher - with about 8800 Ph: (888) 401-6367 x701 tach, oil pressure, water temp and hours. Saw Head has Item Bunching ID: 13916 amp gauges.Austin Cuts logs up to 16”. Contact: large pocket for accumulation and chain conveyer, 8 way splitter, on One comes with Ph: owner (888) and 401-6367 x703all Item ID: 14073 lifting side shield for notching 20,000lb goose neck trailer. Item ID manuals and receipts. Purchased Contact: Austin larger trees before felling. Item ID: 14011 Item ID: 13855 new for $32,500. Item ID 13865. 13916. Austin x703 Ph: (888) 401-6367 x703 Contact: Austin Contact: Sam Cummins engine. 28L tires at 60%. Skidder - Very good running Best Value Portable Log Splitter Sam x702 Ph: (888) 401-6367 x703 ®Ph: (888) 401-6367 x702 ® condition. Big Capacity Grapple! Decent running condition. Item ID PRO-TEC-TO WRAP & PRO-TEC-TO SLEEVE with 1700 hours, in very good - Small manufacturer in PA has LOGGING EQUIPMENT 9400 hours. Tires at 40%. Totally 13245. Sam x702 CUThigh YOUR made DOWNTIME AND YOUR COSTS! condition. Easily produces the best valued log splitter. BANDIT gone through by621E TP Dealer who 2002 Bandit Hydro Ax - Arouund x702 HydroAx 611B New injectors, quality chips with patented ‘Cone’ Handles logs up to 32”. Uses 1999 1900 Protection Against Pinching, Crushing, Rubbing & Abrasion Tracked Disc did thehours following: Repacked and 12,000 this machine. 2004 Hydro Ax - Thisload cutter injector pump. New Manual 5.9 cummins Chipper - Caton Under Carriage at drum design. Can easily 42’ motor. –470EVEN UV RAYS! 13HP BothHonda are Impervious tostart Oils and Solvents. resealed hydraulic cylinders – Working daily.475 Item 13884. has around 7000 hours. It’s a per clean engine. Rebuiltoption hydraulic pump vans and produce 6 - 8 loads but electronic is available. 50% or better. hpID Cummins grapple arch, steering; Replaced Austin x703Distributor and tight machine. Only reason andfor new teeth. Item4-way ID 13768. Sam day. ItemProvides ID 13882.Maximum Austin x703 Has Log Lift. Uses wedge Diesel. 7500 Hours. One owner. Protection Logging, For The hydraulic hoses and lines where 1998 711EX Saw Head Feller selling isEDGERS due to an upgrade. Item x702 Construction & Stationary Applications Like: two way. Great Well Nearest & GANGS adjustable to single maintained. Item ID 13294. You, Call needed – fill pump, grapple, etc; Buncher 30.5-32 tires at 40%; ID 13846. Sam x702 1999 Hydroax 511EX New Brewco Saws Two Brewco Saws Value! PA. Item ID 12062. Sam x702 Sam x702 • Debarker Buggies • Pantograph Arms • Forklift Masts Repacked hydraulic fill pump; • Wheel Loaders • Skidder • Knuckleboom Loaders Cummins rebuilt 1500 2004 Hydro Ax 670 - Engine has Grapples cummins engine with onlyis1500 in excellent condition. Runs great. Firewood Processor - This a 2004 BanditEngine BeastorModel Visit 4680 Replaced exhaust; Replaced center • Fellerbuncher Heads • Harvesting Heads • Stroke www.pro-tec-toproducts.com hoursCaterpillar ago; 8750 hours; aboutID 500 hours, new saw motor hours. Caterpillar justwith replaced Item 13644. Sam x702 3412 Diesel Quadco engine homemade processor a 10’ Delimbers • Dozer Blades pins; Straightened and painted log Has a hydraulic grapple, with 850 HP. 5300 hrs. Mill in and 22” Large tree saw head. Heat andFIREWOOD disc last year.PROCESSORS Previous owner geardeck. box to hydraulics at the end panels; Changed all fluids and Anywhere Hoses & Wires Are – Pro-Tec-To® Products OEM’s, Repair Facilities & in saw. 2010 Shop Built Wood Processor chain and kicker that all total runs on off good condition. Just finished 10 A/C work. New bearings had the hydrastats redone. This summer. 11000 hours Offers Maximum Protection,ofLower Costs, Reduced filters; Re-insulated cab; Checked Distributor Inquires Welcome -has It has a 353 Detroit diesel, 40 of a 4 cylinder Mercedes power Acre clearing job, ready to work! Cutting trees today. Item ID 13353. a 22”Downtime high capacity is cutter. Tires are 28L’s @ 80%, 2 andhead Lessand Spills! and fixed wiring as needed. Item inch insert tooth circle saw, 30 foot Remote control. Big production unit. Has a 4’ chain saw that kicks Sam x702 a very clean machine. Mounted on @ 40% and one slick. Brand new

‘06 Western Star ‘08 John Deere 4850 Hydraulic Lines – Fuel Hoses – Air Lines Michigan Special CT332

Electric Wire Bundles – Control Cables

800-355-1250

motor, Rotobec continuous

grapple, 5,000 original hours. John Deere Dual Arch Grapple, (excellent Item4000, ID John Deerecondition.). winch, Model

13238. Chris x700 Model 6BTA, Cummins Engine, 1995 775 B Feller Buncher ClarkBarko Transmission 28000. Item ID

‘98 611 Ex-Hydro Ax KOMATSU

- Pumps recently redone. 400 hrs 13738. Austin x703 on injection pump. always started

good. in good working order. 22in Item ID: 13948 2007 Komatsu PC220LC w/2009 kohing head.Austin head works great. Contact: Log Max 7000XT processing head. Item 13185. Sam x702x703 Ph:ID (888) 401-6367 9700 hours on carrier. 7200 hours 1999 Barko 160D - new engine with on Log Max. Excavator style. Cab approximately 1500 hours. Hour guard. Flotation pads. One owner. ID 13438. Sam x702 meter dont work. The last 2 owners 2007 810 Combi Very TimberPro good condition. Item ID have only used it to load trucks or Machine Forwarder set up but 13464. Sam x702 as a backup as needed. Has a CTR comes with rebuilt Log Dozer Max 750 2008 Komatsu D61-EX delimber, grapple has been rebuilt. processing head. Less than 5200 -Boom Greatcylinders Condition. 4511 Hours. have minor leaks. total hours. Runs very well. Has 6 Komatsu U/C at 95%. 35% Pads. Item ID 13694. Sam x702 blade and plumbed for a clam Way Blade. Enclosed comfort 94 Barko 275Fully - Excellent value bunk. New swing gear box. Quick cab. Great price!. Item ID 13570. with low at hours at 3,500. 5.9 attach in 15 min. to switch head to Sam x702 continuous grapple. CUMMINS grapple. Cummins 6.7 QSB engine. 2012 Komatsu D61EX 15 Dozer Runs Great!. Item ID 13740. Sam 260HP. Optional Tracks on all with only 750 Hours. Triple x702 bogies adds $10,000. Item ID 13501. BELL Enclosed Rippers; Limb Sweeps; Sam x702 1990 Bell Heat/AC; Super T - This Bell has cab with 6 way blade; 2010 TimberPro 725B w/Rolly II aUndercarriage brand new Duetz engine. Lever at 90%; Excellent Processor - Super Clean Machine. control, 33” bar, and Sam tranny Condition!. Itempump ID 13459.

‘99 51

Ite Co Ph

Run

shift

at 13

main 24”

year

hyd

Roll

com

retir

Item

2006

Harv

hour

with and

for h

bogi

from

man

top s

new

1343

x7021986 ❘  List  seLL  exch 34’s with 50% tread. Item ID 13828. center section. 20” single post  Issue 364 KMC Lumbermens  since  Issue 364 ❘ 392 Lumbermens™  since 1986  List  seLL  exchange  buy  save ❘  LumbermensCO.com 2014 Komatsu 450 - Only 1100 Sam x702 head. Heat and air work. Item ID KMC Track Skidder 2500P -


All Sizes Available! BANDSAW** CALENDAR**

BLADES

TOP PERFORMING, economical blades for all primary & secondary wood processing. Welded to your lengths! NY STATE WOODSMEN'S We also offer expert sharpening services, plus...

FIELD DAYS Fri, 18 August Sun, 20 Gang • Edger • Scragg • Trim • Split • Strob August ....and just about any Boonville, Custom Saws youNew need York to keep you cutting longer... www.starwebhosting.net/woodsmen/ for less. Ask about FREE Shipping!

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

©2019 Wood-Mizer LLC

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in

72ND ANNUAL GREAT LAKES Call Marvin Miller for a quote EQUIPMENT EXPO LOGGING & HEAVY 231-924-5953 (fax) 231-924-6166 / 11606 Brickyard Road • Holton, MI 49425 Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags,

ROW ELECTRICAL EQUIPMENT, INC. MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

pressure guides. Top Casting wheel Selma, North Carolina www.midatlantic-logging-biomass­ is supported on both sides. This YOUR SOURCE FOR USED, RECONDITIONED: MID-ATLANTIC expo.com/ LOGGING & BIOMASS EXPO is an extremely accurate machine • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

• • • •

MARKETING DIRECTOR John Williams (888) 401-6367 ext. 701 j@lumbermens.co

it includes two sets of Mcdonough

Fax

Gear Motors Wound-Rotor Motors Synchronous Motors DC Motors

to:

• Adjustable Speed Drives KENTUCKY WOOD EXPO • Generators - AC and DC Fri, 15 Sept - Sat, 16 Sept • Engine-Generator Sets Lexington, • Transformers,Kentucky Single Phase http://www.kfia.org/ P.O. Box 2812 •KentuckyWoodExpo.aspx Toledo, Ohio 43606

• • • •

Across/Line Magnetic Starters in ve1y good condition, Cuts 130 Reduced Voltage Starters feet a minute also has CLT presses. Safety Switches Item ID 13876. Austin x703 Phase Convertors S & W 125 Band Mill with

Caterpillar generator - Low hours 800-248-4479

WWW.RoWELECTRiCAL.CoM on the mill, electronic computer Set DESIGN DIRECTOR THE PAUL BUNYAN SHOW 419-248-4479 rowelec@glasscity.net sales@rowelectrical.com Donna Heninger works,1 1/2" or 2" band, 22ft. track Fri, 6 Oct - Sun, 8 Oct WE ANSWER THE PHONE 24 HOURS • WE BUY USED ELECTRICAL Cat 3406 140KW Genset, 12,400 Cambridge, Ohio EQUIPMENT REPS

419-244-8887

www.ohioforest.org

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

** INFO LINK**

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS P.O. Box 1916

Bell UltraTNT38402-1916 on Columbia, (888) 401-6367 Tracks Item ID: AD 14023 SUBMISSIONS Contact: Sam May be sent to­ Ph: (888) 401-6367 x702 morris@lumbermens.co

B & BHalverson Mfg. ............................... 18 ‘16 H140

Item ID: JW-192810 Baker ...................................... 5, 7 Contact: J Williams Ph: (888) 401-6367 x701

Bell's Machining ..................... 27 Brute Force Mfg. ..................... 31

does great job in hardwood. Priced

Lumberman's Has only 2600 hours.Exchange Has new

John Deere 20 .............................. hole Sweda wheels32 Corley Mfg

P.O. Box 1916 Columbia, TN 38402

30.5 X 32 26 ply on rear and 70% on front. Still a new skidder and

priced to sell. ItemExchange ID 13696.isSam The Lumberman's x702 published monthly by Woods

Publishing, P.O. Box 1916, 2013 JD 848H Grapple Skidder -

Columbia, 38402. All rights 4200 hours.TN Tires at 50%. Winch.

reserved. All editorial/ advertorial submissions are used at the are tight. Machine is dry. Engine discretion of the publisher and may runs great.for Item ID 13555. Sam be edited purposes of clarity and space. Although all efforts have x702 beenJohn madeDeere to ensure accuracy of 1991 640D Skidder content submitted by advertisers - 23.1 x 26 Tires 50%, Rebuilt and writers, the Lumberman's Trans.,Good Machine. Exchange, itsTight principles and Item ID 13191. Sam x702 associates, are not held liable for errors omissions. Reproduction, 1995 JDor 290D with Hytec 4700 in whole or part, -is290D prohibited with­ Harvester Head in good out written consent. condition. Engine just overhauled. ©2017 Woods Publishing

Very good running condition. Pins

Undercarriage at 50%. New water

‘05 CAT TK560

Skidsteer B. H. Payne .............................. 16 Meadows Mill, Inc. ................ 33 Item ID: 14004

POSTMASTER with winch, direct drive. Comes

address changes to: with Send 6000 hour extended warranty.

M&F Gauge ............................. 28

Equipment (AIM) ........ 36 toBuck sell!. Item ID 12206. Sam x702 - These 50’s are mounted on hard

Metalworks .................... toCRD find 20 hole John Deere sweda25

Empire Hydraulics ................... 8

inGreat front at 60%.Mfg 650 .tires in back at Lakes .................... 34 60% and come with tracks. Front

Hahn Machinery ...................... 3

blade. JD engine. One owner.

Double ID 13363. Sam Hurst bunk. BoilerItem ............................. 14 x702

13910. Austin carriage knees,x703 husk including

Mor bark -..................................... 9 Grapple Good running condition.

be a great starter skidder. It is

Skidder w/ESCO Swing Boom

Front blade. Detroit 6V53 engine. Multitek ................................... 12 No winch....they cannot fit with

Piper's Saw Shop .................... swing boom grapple. Military 13 style x702

Skidder -Exchange 1976 Model that has been Sawmill .................. 11 totally refurbished in 2012. No

Select Sawmill ......................... 19 hours since updates were done.

Includes warranty on machine and Smith Sawmill ........................... 4 tracks. Detroit 6V53 engine with

The Paul Bunyan Show ......... 39 195HP. Clark 28000 Powershift

transmission. Clark 40,000 lb Thomas Industrial Controls ..... 10 Winch. ROPS Cab. Includes bolt

Union Grove Saw & Knife.. 2, 37

1977 (est) FMC 220CA Tracked 22 Kilgore Saw .............................

New Paint.Refiner Item ID................... 12731. Sam23 Universal

Lignomat ................................. 24

WoodMizer ................................ l

Skidder - Good running unit.

Detroit 6V53 cranks and runs

on grapple head with full function. x702

FRANKLiN

well. Military style tracks at 70%.

1995 Franklin 170 - Enclosed cab,

Winch. Front Blade. Item ID 13226.

paint, 4 brand new 23.126 firestone

Grapple and working single arch with a winch, new Runs well. Cab has heat pump. FORESTRY EQUIPMENT FOR Fixed SALE ❘ l§  SELL YOUR EQUIPMENT TODAY ❘ 0  24/7 SUPPORT - USED SALE ESCO TODAY SUPPORT and air with stereo and all run

well. Head recently updated and

Sam x702

Item ID: 14050

drive, hyd pac for carriage, Contact: Austin Woods

Midwest Sharpening.............. 26

Iron Bull ................................... 21

FMC

Mill

with onboard log turners, carriage

cabinet with electronic drives for

1977 (est) FMC 220CA Tracked

Row ............................ 20 2012 Electric Refurbished FMC 210 Tracked

Good running condition. 30.5 tires

Sanborn Scragg Carriage line it includes carriage

Metal Detector's Inc. .............. 30

CWx702 Mill-Hogzilla ................... 15 Sam 2004 Fabtek 546C Forwarder -

Carriages (Sawmill) - Cardinal

(888) 401-6367 Ext.controls, 606 sawyers cab, computer

Ph: (888) 401-6367 x702

tracks at 70%............................. Item ID 13227. Sam Rotochopper 40

FABTEK Dyna Products ........................ 35

CARRIAGES & DRIVES

2010 Cardinal HD Carriage

Contact: Sam Menominee Saw ..................... 29

rims. 50% tread left .............. on these17 CW Still Mill-ArmorHog tires. 4 available. Item ID 13852.

hours ready to run. Item ID 13434. Sam x702

tires, around 15000 hours. Item ID

Franklin 170 Skidder - This 48" bottom saw and 36" top would saw a single arch with winch. Runs

STACKING RAC

good and pulls good. Detroit 453 turbo and 3 speed power shift

transmission. Good center section. There are a few leaks, but nothing major. Item ID 13819. Sam x702 Franklin 3000 - 4BT Cummins

engine with approximately 600

hours. Needs tires. Good machine for the money and for a start up

company. Item ID 13786. Sam x702

2003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours

on reman engine. New Radiator; New Hydraulic Pump; Comfort

cab with good working heat and air; Tires at 80%. Item ID 12450.

www.BakerProducts.net 800.S48.6914 I S73.663.7711

Sam x702

GMC

ton Service Truck ❘ 2000  GMC (888) 1.5 401-MENS NO. 13 L! 401-MENS - PTO driven air compressor,

big boxes, covered hose reels,


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin 3-Hd ‘14 Hurdle Ph: (888) 401-6367 x703

Block Sawmill

Item ID: 13997 Contact: Austin Ph: (888) 401-6367 x703

2006 CAT 517

Item ID: 13869 Contact: Sam Ph: (888) 401-6367 x702

‘95 John Deere C6 Every Reputable Wide Band Tree Farmer

Supplier Offers

Item ID: 13920

Contact: Austin ‘13 KMC 2500 Track 3 High Quality Swedish Ph:Steel (888) 401-6367 x703 Skidder 3 3” – 8” Band Width

Item ID: 14078 3 16 to 20 Gage Firewood Proc. Contact: Austin capacity!. Item ID 13421. Sam x702 3 401-6367 Double Cut Ph: (888) x703Options Item ID: 13865 BARKO 3 Choice of Swage or Contact: Stellite Sam Ph:Barko (888)160B 401-6367 1994 - Electricx702

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

‘06 Brewco B1600 Resaw

Item ID: 13862 Contact: Sam When You 401-6367 Buy Yourx702 Circular Saws From B.H. Payne Ph: (888)

‘05 Woodmizer LT300

You’ve Bought the best... We Guarantee It!

WOLVERINE

off ontoKomatsu a conveyor. This is a very ‘14 WA200

knuckleboom, 30' boom, 75hp

Firewood Processor - This is

(excellent condition.). Item ID

BUT ONLY THE motor, Rotobec continuous Loader boom loader, 3 knife disc, Newer grapple, 5,000 original hours. Sam x702 MENOMINEE SAW GUARANTEES One BY Owner, low hours! discharge chute, New banding well built processor. Item ID 13820.

Item•ID: 14010 Edge Cutting

Plasma Welds around disc, Brakes and tires are 13238. Chris x700 also OK, Everything works well • The Industry’s Band Gehl 70 Item ID: CTL 14031 1995 BarkoSaw 775 BCapacity Feller Buncher automatice firewood processor Traditional‘05 Quality Combined Ph: (888) 401-6367 x703Highest Newer clutch -- with outboard Contact: Austin Item ID:Technology JW-986495 with John Deere power unit with - Pumps recently redone. 400 hrs With Todays • Quick Delivery from our HUGE Inventory bearing, Had Cummins KTTA 750 Contact: J Williams Ph: (888) 401-6367 x703 on injection pump. always started hours. Control panel includes 14’ Snow Pusher ‘04(888) CAT 953Cx701 Front- low • Fast A924 Sharpening & Exchange Program Ph: 401-6367 2011 Liebherr Rubber Tired HP engine -needs repower. Item Item ID: JW-492406 tach, oil pressure, water temp and good. in good working order. 22in Circular SawsDeere ‘83 John ‘11Handler. Doosan DL200 to Keep YOU Running ID end Loader Makew/ Sure To Ask For Our Free, Complete Saw Catalog Log Liebherr 4 cylinder 12443. Sam x702 Saw Bits and Shanks KW 2000 W900 Contact: Williams kohing head.J head works great. amp gauges. Cuts logs up to 16”. 4850 Circular Knives Item ID: JW-113876 We Manufacture & SellItem Inserted Tooth Headsaws, Solid Tooth Ph: (888) 401-6367 x701 engine•with great fuel economy. 1997 Morbark Model 2400 Chipper ID: 13854 Competitive Pricing Rotobec MT27 Carbide Tipped Saws Item ID 13185. Sam x702 chain conveyer, 8 way splitter, on One owner and comes with all Quality Brand Reg. U.S. Pat Off

a Contact: Chomper Model 16 PDA Austin

Call 800 752-0627

Item ID: 14073 Saws, Inserted Tooth Cutoff Saws & Sam Carbide Saws. We also Contact: 20,000lb goose neck trailer. Item ID Stock & Sell Bits & Shanks, Carbide401-6367 Tips, Diamondx702 Wheels, Ph: (888) Saw Manufacturers 13916. x703 Ph: John (888) 401-6367 x703 Deere 548G2 Knife Grinding Wheels, SawAustin Gumming Wheels & Knives. Item ID: 13993 Best Value Portable Log Splitter Item ID: 14042 Contact: Austin Here’s What You Get With Every B.H. Payne Saw drive and steering. Contact: Austin Ph:1700 (888) 401-6367 with hours, in very x703 good -trailer. Small 4-Wheel manufacturer in PA has • Saws manufactured from only the Highest Quality Nickel Alloy Steel.be Ph: (888) 401-6367 x703 Top Quality machine. Would ‘14 B66TD condition. Easily produces high made the best valued log splitter. • Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine. hours on this with machine, in excellent great for logs log yard or32”. millUses work. quality chips patented ‘Cone’ Handles up to • We Tension Your Saw to Your RPM SpeedRotochopper BEFORE Leaving Our Factory. - 3410Item hours. $32,000 in recent condition. ID 13937. Austin Item ID 13476. Sam x702 drum design. Can easily load 42’ Guaranteed. 13HP Honda motor. Manual start • Your Satisfaction - Completely Item ID: A904 13838 upgrades and repairs. Fecon x703 2011electronic Liebherr Rubber Tired vans and produce 6 - 8 loads per but Contact:option Sam is available. BH250 Mulching Head. Item ID Log Log Handler.Uses Liebherr 4 cylinder day. Item ID LIEBHERR 13882. Austin x703 Has 4-way (888)Lift. 401-6367 Ext.wedge 603 B.H. Payne & Company, Inc. Carbide Strobe ® Saws Heavy Contact: Austin B.H. Payne &Spec Company

Sam x702 Log Handler 2007 13502. Liebherr A924C EDGERS P.O. Box 90608& GANGS 2011 Tigercat 620D - This is a Rubber Tired Loader. 13,000 Brewco Saws -Log Two Brewco Saws

engine with adjustable togreat singlefuel twoeconomy. way. Great 11,230 PA. hours. Fixed cab riser. Value! Item ID 12062. SamTwo x702 East Point, GA 30364 low hour skidder with only 5500 Item ID 13408. Sam x702 section boom with 38’ reach. hours. Reach with two in excellent condition. Runssection great. Firewood Processor - This is aCab 404 40’ 761-8711 hours on a cummins engine and 2014 Tigercat 630D Grapple protection. 4-Wheel drive boom. 60” Log Grapple with Item ID 404 13644. Sam x702 homemade processor withand a 10’ Fax 761-5398 a fire suppression system. Skidder - Dual Archtrailer. Grapple. Just steer. CanHas pull continuous rotation. Fixed CabComes log FIREWOOD PROCESSORS deck. aloaded hydraulic grapple,

Contact: J Williams

11,230 hours. Fixed cab riser. Two manuals and 401-6367 receipts. Purchased Ph: (888) x701 And ONLY Menominee section boom with 38’ reach. Cab new for $32,500. Item ID 13865.

- Has a Cumins diesel engine and 1999 Barko 160D - new engine with

Gives YouAllEverything runs great. fluids and filters approximately 1500 hours. Hour You need in a Wide Band Saw – Plus protection. 4-Wheel drive and have been changed. Item ID 13429. meter dont work. The last 2 owners Sam x702 Expert Service from the Industry’s Most steer.LOGGING Push blade. Can pull loaded Sam x702 EQUIPMENT have only used it to load trucks or Knowledgeable Staff. trailer. Cleaned, serviced and 1999 Morbark 1400 TubHas Grinder BANDIT as a backup as needed. a CTRinspected. dry and ready delimber, Loader w/Cab; Very 1999 BanditTight 1900 and Tracked grapple4200 has hours; been rebuilt. Got aDisc Wide Band Problem? for work. Located in Baltimore, good condition. Located in PA. Chipper - Cat Under Carriage at Boom cylinders have minor leaks.

Call Menominee SawItem Today andSam You’ll ID13694. 13361.Sam x702 Item ID x702 ‘04Trust Fabtek 344B Learn Why More Mills the Pro! LINK-BELT 2006 Morbark 6600 Horizontal

MD.or Item ID 13478. x702 50% better. 475 hpSam Cummins

Diesel. 7500 Hours. One owner. 1997maintained. Linkbelt 3400 hasID rebuilt Well Item 13294.

94 Barko 275 - Excellent value

Item ID: JW-093430 ‘05 Transport Grinder hours with low -atApprox. hours at6000 3,500. 5.9 on Contact: J Williams Trailers Custom TOLL FREE machine. this well Pierce Stroke Delimber. 36” Pads Sam x702 CUMMINS continuous grapple. Ph: (888)maintained 401-6367 x701 Has New Cat Dealer Rebuild on 60% undercarriage. 2004 Bandit Beast Model5221 4680hours. Runs Great!. Item ID 13740. Sam Log Pup 1-800-582-0470

1000HP Engine at 5000 hours. GoodCaterpillar condition. Owner 3412 Diesel engine x702 Itemrunning ID: JW-538174 Processor - This is a Chomper 900 16th St., Menominee, MI BELL 49858 42” X 66-5/8” HAMMERMILL; just spent $30,000 on upgrading with 850 HP. hrs. Mill in Contact: J5300 Williams super 14, with a 60hp engine. In Tel: 906-863-2609 Fax: 906-863-1147 mounted 35.5 protection. tires at 50% back chain 1990 hours. 3 year/5000 hour Cleaned, serviced andallinspected. VARIABLE SPEED INFEED Riser with Built cab on guard delimber. Item ID 12992. Sam10x702 1990 Ph: condition. (888) 401-6367 x701 “Since 1890” 2010 Shop Wood Processor and kicker that runs off PT good Just finished Bell Super T - This Bell has very nice shape. Only 171 hours, Email: info@menomineesaw.com and 40% frontTight and good chains on of tires with Tight and dry35.5 and ready fordualing work. HAMMERMILL push blade. and40 dry. -Front It has a 353 Detroit diesel, awarranty. 4 cylinder Mercedes power Acre clearingMORBARK job, ready to work! aSYSTEM; brand new Duetz engine. Lever comes with green chain conveyer. all 4 Serviced, tires. Has the bigger rings at 60%. Wide blade. Winch. Located in Baltimore, MD. ID Remote 1987 Morbark WCL NEEDS DRIVE 33” INCLUDES ALL Cleaned, andsaw, Checked inch insert tooth circle 30630 footaxles unit. control.27Big production control, bar, pump andBELTS, tranny Has a www.paynesaws.com 4’ chain saw thatItem kicks E-mail: info@paynesaws.com Web Site: Waratah 624 Super - New All of the manuals for the engine, and no winch. pins are tight13477. ItemSam ID 13526. x702 Sam x702 MOTOR - Morbark 1000 Knuckle SHEAVES, BUSHINGS & out for service. CanCenter pull loaded Computer for head (Logrite). and chopper itself come with  Issue 364 Lumbermens  since 1986 ❘ 234BLoader 392fuel List  seLL  exchange  grapple buy w/ save ❘ the  LumbermensCO.com and extra tank. Item ID ™ 13929. 2015 Tigercat - Model roatation on the a 2006 Tigercat 630C Grapple 10500 hours. New main it, asLumbermensmagazine.com well as all of the electrical  Issue 364 Lumbermens  since234B. 1986Only ❘ 300  Listonthis seLL  exchange  pump save ❘  Sam x702 hours 30’ reach on thebuy boom. Joystick Skidder - Very good running and auxiliary pump. New rebuilt schematics. Item ID 13894. Austin

WWW.MENOMINEESAW.COM


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

John DeereDIRECTOR 748G3 MARKETING Item 99990 JohnID: Williams

John Deere Grappleext. (888)748G3 401-6367 skidder. 11,000 engine hours

701 j@lumbermens.co

Contact:DESIGN WALKER DIRECTOR Email: Walker@lumbermensco.com Donna Heninger Phone: 888-401-6367 EXT 707 OR 931-797-3915

EQUIPMENT REPS

Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Drum Chipper AD SUBMISSIONS Itembe ID:sent 99989 May to­

Item ID: 12432

WALKER THE Contact: PAUL BUNYAN SHOW Email: Walker@lumbermensco.com 888-401-6367 707 Fri,Phone: 6 Oct - Sun, 8EXT Oct

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

OR 931-797-3915 Cambridge, Ohio www.ohioforest.org

** INFO LINK** B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7 Tigercat 620E Item ID: 99984 Bell's Machining ..................... 27

Menominee Saw ..................... 29

Brute Force Mfg. ..................... 31

Komatsu Metal Detector's Inc.931.1 .............. 30 Item ID: 99949 Midwest Sharpening.............. 26

........ 36

Email: Austin@lumbermensco.com Mor bark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39 John Deere 540G3

2016 4300B Drum Chipper for sale. morris@lumbermens.co

2014 Tigercat 620E Grapple Skidder.

POSTMASTER Contact: WALKER Email:Send Walker@lumbermensco.com address changes to: Phone: 888-401-6367 EXT 707 Lumberman's Exchange OR 931-797-3915

Contact: WALKER Email: BuckWalker@lumbermensco.com Equipment (AIM) Phone: 888-401-6367 EXT 707 OR 931-797-3915

P.O. Box 1916 Columbia, TN 38402

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's 2017 Eco Log 688D Exchange, its principles and Item ID:held 99994 associates, are not liable for errors or omissions. Reproduction, Contact: AUSTIN in whole or part, is prohibited with­ Email: Austin@lumbermensco.com Phone: 888-401-6367 out written consent.EXT 703 OR 931-797-8029 ©2017 Woods Publishing

Caterpillar D4H

Hurst Boiler 14 Item............................. ID: 99982

Contact: AUSTIN

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID:Controls 99991 ..... 10 Thomas Industrial 2007 John Deere 540G3 cable skidder

80's D4H with winch. Ironmodel Bull caterpillar ................................... 21

Union Grove Saw & Knife.. 2, 37 with 4500 original hours.

KilgoreWALKER Saw ............................. 22 Contact: Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Lignomat ................................. 24 OR 931-797-3915

Universal Refiner ................... 23 Contact: WALKER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 WoodMizer ................................ l OR 931-797-3915

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item IDJohn 13876.Deere Austin x703 540B

S & W 125Item BandID: Mill with 99986

John Deere 540B with "D"-decals. Caterpillar generator Low hours

on the mill, electronic computer Set Contact: WALKER Email: Walker@lumbermensco.com

works,1 1/2" or 2" EXT band, Phone: 888-401-6367 707 22ft. track

OR 931-797-3915

Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

Timberjack 450C

sawyers cab, computer controls, Item ID: 99988 Timberjack 450C Dual cabinet with electronic drives for arch Grapple skidder.

carriage knees, husk including Contact: WALKER 48" bottom saw and 36" top saw Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

STACKING RAC Rhottne F-11 Item ID: 99976

2000 Rhottne Rapid F-11 forwarder.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 www.BakerProducts.net 800.S48.6914 OR 931-797-3915 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 15

B U Y S

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367 Peterson 4300

Cornell Gang Saw

Item ID: 99987

http://www.kfia.org/ 2005 John Deere 648G3 KentuckyWoodExpo.aspx single arch grapple skidder.

BANDMILLS & HEADSAWS

H O T

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co

John Kentucky Deere 648G3 Lexington,

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


H O T

B U Y S

TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO)

John Deere 648G3

John Deere 648L

2008 John Deere 648G3 single arch Grapple skidder.

2016 John Deere 648L Grapple. Steering wheel machine

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Item ID: 99992

Item ID: 99993

Item2012 ID: JW-909632 Eco Log 590D Contact: J Williams Item ID: 99996 Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘93 Barko 180B

ItemJohn ID: 14077 Deere 210G Contact: Austin Item ID: 99983 Ph: John (888) 401-6367 x703 2014 Deere 210G LC track cutter with a Wartaw Dangle Head that has a 44 inch bar.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘95 John Deere C6 Tree Farmer Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

‘13 KMC 2500 Track Skidder Timberjack 13428 Victory Ln.360C // PO Box 124 Item 89706NY 13606 AdamsID: Center, Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14078 2010 Tigercat 250B Contact: Austin Item ID: 99965 Ph: (888) 401-6367 x703

Timberpro 745C Item ID: 99938

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 onto a OR 931-797-8029 off conveyor. This is a

very

L O G G I N G

Sam x702

Firewood Processor - This is a Chomper Model 16 PDA

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

‘83 John Deere 4850

Item 14073 12’ ID: John Deere 848H Contact: Austin Item ID: 99963 Ph: (888) 401-6367 x703 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Timbco 425B Item ID: 99962 Item ID 13644. Sam x702

FIREWOOD PROCESSORS

tach, oil pressure, water temp and

new for $32,500. Item ID 13865. Contact: AUSTIN

Email: Austin@lumbermensco.com Best Value Portable Log Splitter Phone: 888-401-6367 EXT 703 OR 931-797-8029

- Small manufacturer in PA has

made the best valued log splitter.

2014 model with 4800 hours and brand new manuals and receipts. Purchased 23.1 x 26 rubber.

Email:x702 Austin@lumbermensco.com Sam Phone: 888-401-6367 EXT 703 OR 931-797-8029

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 inch insert tooth circle saw, 30 OR 931-797-8029

Email: Austin@lumbermensco.com Phone: 888-401-6367 703 unit. Has a 4’ chainEXT saw that OR 931-797-8029

 Issue 364 392

low hours. Control panel includes

13916. Austin x703 Contact: AUSTIN

2016 Cat 563C

log deck. Has a hydraulic grapple, 93’ John Deere 640E Item ID: 99971 chain and kicker that all runs off

foot

with John Deere power unit with

chain conveyer, 8 way splitter, on

Buncher is in excellent condition with 9000 original hours, has reman motor with 1000 hours.Shop BarsawBuilt head with 350 degree rotation. 2010 Wood Processor

-Contact: It has a AUSTIN 353 Detroit diesel, 40

automatice firewood processor

John Deere amp gauges. Cuts logs540G3 up to 16”. Item ID: 99961 One owner and comes with all

20,000lb goose trailer. Item ID Itemneck ID: 99970

Contact: AUSTINMercedes power of a 4 cylinder

Lumbermens™  since 1986

kicks

BARKO

Contact: AUSTIN

well built processor. Item ID 13820.

‘05 Gehl CTL 70

John Deere 648H

capacity!. Item ID 13421. Sam x702 Item ID: 99974

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

with 2012 850 HP.Tigercat 5300 hrs. Mill in 250C Item ID: 99966 good condition. Just finished 10

Contact: AUSTIN Acre clearing job, ready to work! Email: Austin@lumbermensco.com Phone: 888-401-6367 703 Remote control. BigEXT production OR 931-797-8029

 List  seLL  exchange  buy  save

Email:Barko Austin@lumbermensco.com 1994 160B - Electric Phone: 888-401-6367 EXT 703

OR 931-797-8029 knuckleboom, 30' boom, 75hp

motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

97’ John Deere 548G2

1999 Barko 160DID: - new engine with Item 99972 approximately 1500 hours. Hour Contact: AUSTIN

Email: Austin@lumbermensco.com meter dont work. The last 2 owners Phone: 888-401-6367 EXT 703 931-797-8029 have onlyOR used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL 748G3 05’ John Deere

Item ID: 99967 1990 Bell Super T - This Bell has

AUSTIN aContact: brand new Duetz engine. Lever Email: Austin@lumbermensco.com

Phone: 888-401-6367 EXT 703 control, 33” bar, pump and tranny

OR 931-797-8029

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 700H Forestry Dozer

Boonville, New York www.starwebhosting.net/woodsmen/

Item ID: 99902

Item ID: 99930

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Komatsu PC270LC SOUTHWEST FOREST PRODUCTS EXPO Delimber

2013 John Deere 753J

2004Woods Timbco 425 EXL Publishing Item ID: 99855

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com 401-6367 Phone:(888) 888-401-6367 EXT ext. 703 704 OR 931-797-8029 morris@lumbermens.co

Hot Springs, Contact: SAM Arkansas Email: Sam@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Fri, 25 August Item - Sat,ID:2643950 August

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

1998 John Deere 548G Selma, Valmet 430FXL with North Carolina Grapple skidder www.midatlantic-logging-biomass­ Komatsu 233 barsaw MID-ATLANTIC Item ID: 99921

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

MARKETING DIRECTOR

Donna Heninger

EQUIPMENT REPS

(888) 401-6367 ext. 703 austin@lumbermens.co

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

Send address changes to: Tigercat 724E Feller Lumberman's Exchange Buncher P.O. ID: Box99815 1916 Item

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Tigercat 830C and writers, the Lumberman's Leveling Cutter Exchange, its principles and Item ID:held 94337 associates, are not liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent.EXT 702 Phone: 888-401-6367 ©2017 Woods Publishing

CAT 559C

Cambridge, Ohio www.ohioforest.org

Caterpillar Item ID: 2476

Item ID: 269

** INFO LINK**

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2011 437D John Deere

Knuckle Boom Loader BANDMILLS & HEADSAWS

Item ID: 52342 Danckaert Band Resaw - Roughly Contact: WALKER 10 hours on this machine since it Email: Walker@lumbermensco.com Phone: 707 has been 888-401-6367 rebuilt, it has a EXT 24foot in

feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Timberjack 380This is supported on both sides. Item ID: 99926 is an extremely accurate machine Contact: SAM in ve1y good condition, Cuts 130 Email: Sam@lumbermensco.com feet a minute also has CLT presses. Phone: 888-401-6367 EXT 702 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours

on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

‘11 Tigercat 620D Sam x702 Item ID: 13929

CARRIAGES & DRIVES

Contact: SAM 2010 Cardinal HD Carriage Email: Sam@lumbermensco.com Carriages (Sawmill) - Cardinal Phone: 888-401-6367 EXT 702

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 Timbco 445EXL Hotsaw

'96 CAT 515 Log Skidder Mor bark ..................................... 9

Item ID: 47200 CRD Metalworks .................... 25 Contact: SAM

Email: Sam@lumbermensco.com CW Mill-ArmorHog .............. 17 Phone: 888-401-6367 EXT 702

Multitek ................................... 12 Contact: SAM Piper's Shop.................... 13 Email: Saw Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Feller Buncher Corley Mfg .............................. 32

‘89 CAT D4H LGP Hurst Boiler ............................. 14

Item ID: 13999 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 703 22 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID: 7534

Thomas Industrial Controls ..... 10 Prentice 180E Loader

& CTR Union Grove Saw &saw Knife.. 2, 37 Item ID: 99822 Universal Refiner ................... 23

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

‘14 CAT 535C Item ID: 13840

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Cat 515 Cable Skidder Item ID: 99873

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 17

L O G G I N G

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR

Item ID:Woods 78104 Austin

Contact: SAM

KENTUCKY WOOD EXPO Email: Sam@lumbermensco.com Phone: EXT 702 Fri, 15 Sept888-401-6367 - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall John401-6367 Deere 548G2 (888) ext. 702 sam@lumbermens.co Grapple Skidder

Item ID: 99908 expo.com/

LOGGING & BIOMASS EXPO

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

TIMBERJACK 230A

Prentice 2384

Item ID: 9450

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 27398

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Timberjack 430 PARTS ‘16 Halverson H140 Item ID: 99931 Skidsteer (DEMO) Contact: SAM Item ID: JW-909632 Email: Sam@lumbermensco.com Phone: 888-401-6367 Contact: J Williams EXT 702

‘9388’Barko 180B John Deere 540D

Item ID: 99915 Item ID: 14077 Contact: Austin Contact: AUSTIN Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

OR 931-797-8029

Ph: (888) 401-6367 x701

Serco Grapple Item ID: 99912

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2010 John Deere 648H TC Skidder Item ID: 57023

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 99919

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367170 x703 '93 Franklin Item ID: 36406

with 1700 hours, in very good Contact: AUSTIN

Email: Austin@lumbermensco.com condition. Easily produces high Phone: 888-401-6367 EXT 703 OR 931-797-8029 quality chips with patented ‘Cone’

drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID Risley 13644. Sam x702 2 Rolly Item ID: 1993 FIREWOOD PROCESSORS

2010 Shop Built Contact: SAM Wood Processor Email: Sam@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: 74169

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 Track Phone: 888-401-6367 EXT 702

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2011 Volvo Delimber

Cat 518 Grapple Skidder

PARTS '95 Timberjack 450 Dual Arch Skidder Item ID: 12270

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Bandit 1850 Track Chipper

off onto a conveyor. This is a very

well built processor. Item ID 13820.

John Deere 3754D

Diamond Z Track ‘95'18John Deere C6 Mounted Horizontal Grinder Item ID: 373 Tree Farmer

Contact: AUSTIN Item ID: 13920 Email: Austin@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 703 Ph: (888) OR 931-797-8029 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Cat 322CL Processor

Firewood Processor - This is

Logmax 7000XT grapple, 5,000 original hours. Item ID: 78834 (excellent condition.). Item ID

Phone: 888-401-6367 EXT 703 ORfirewood 931-797-8029 automatice processor

Phone: 888-401-6367 EXT 702 1995 Barko 775 B Feller Buncher

Sam x702 Item ID: 45747 Contact: AUSTIN

Austin@lumbermensco.com aEmail: Chomper Model 16 PDA

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

new for $32,500.210E Item ID 13865. Prentice Loader

Contact: SAM 13238. Chris x700

Email: Sam@lumbermensco.com

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

Prentice 1500 384 hours. Knuckle approximately Hour

Handles logs up to 32”. Uses

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR1900 931-797-8029 1999 Bandit Tracked Disc

Boom & Delimber meter dont work. The last 2 owners Item ID: 49732 have only used it to load trucks or Contact: SAM as a backup as needed. Has a CTR Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTrebuilt. 702 delimber, grapple has been

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Best ValueItem Portable Log Splitter ID: 99904 -Contact: Small manufacturer in PA has AUSTIN

Email: Austin@lumbermensco.com made best valued Phone:the 888-401-6367 EXTlog 703splitter. OR 931-797-8029

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ Feller Buncher

log deck. Has hydraulic Itema ID: 78672 grapple, chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703

unit. Has aOR4’931-797-8029 chain saw that kicks

Lumbermens™  since 1986

Sam x702 Item ID: 79682

LOGGING EQUIPMENT BANDIT

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

PRENTICE 2210 3412 Caterpillar Diesel engine

Item ID: 7060 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

1998 Timberjack 360 BELL

Item ID: 8121 1990 Bell Super T - This Bell has WALKER aContact: brandWalker@lumbermensco.com new Duetz engine. Lever Email: Phone: 888-401-6367 EXTtranny 707 control, 33” bar, pump and ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Cat D6T XW Dozer Item ID: 27832

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Boonville, New York www.starwebhosting.net/woodsmen/ 08’ John Deere 437C

'09 John Deere 753J Buncher Item ID: 14106

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 www.arkloggers.com OR 931-797-8029 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

2012Woods John Deere 648H Publishing Price $45,000

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

MARKETING DIRECTOR

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Timberjack 240

Item ID: 80318 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Selma, North Carolina 234B 2014 Tigercat www.midatlantic-logging-biomass­ Item ID: 29966 expo.com/

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 Sept931-797-8029 931-797-8029 Fri, 15 - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co OR 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

John Skid Send Deere address333G changes to: SteerExchange Lumberman's Item P.O. ID: Box31439 1916

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Morbark 20 Lumberman's Chipharvester and writers, the ID: 38035 Exchange,Item its principles and associates, are not held liable for Contact: SAM errors or omissions. Reproduction, Email: Sam@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 702 out written consent. ©2017 Woods Publishing

CAT 235 BZ Item ID: 1865

Cambridge, Ohio www.ohioforest.org

2009 Valmet 840.4 Item ID: 79249

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

2015 Cat 545D BANDMILLS & HEADSAWS Item ID: 45196

Danckaert Band Resaw - Roughly Contact: AUSTIN 10 hoursAustin@lumbermensco.com on this machine since it Email: Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, 931-797-8029 feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Timberjack 240

is supported on both sides. This Cable Skidder Item accurate ID: 60608 is an extremely machine in ve1y good Contact: SAM condition, Cuts 130 Email: Sam@lumbermensco.com

feet a minute also has Phone: 888-401-6367 EXTCLT 702 presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

MC 166 Rotochopper

Sam x702 Item ID: 8165

CARRIAGES & DRIVES

Contact: SAM

2010 Cardinal HD Carriage Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Prentice 384 w/ Bucksaw & Delimber Buck Equipment (AIM) ........ 36

Item ID: 14213 Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... 25 Phone: 888-401-6367 EXT 703 CW Mill-ArmorHog OR 931-797-8029 .............. 17

John Deere 648H Morbark ..................................... 9 Grapple Skidder Multitek ................................... 12 Item ID: 96833

Contact: SAM Piper's Saw Shop.................... 13 Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 40 Rotochopper ............................

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler 2015 John............................. Deere 848L14

Thomas Industrial Mulcher Controls..... 10 Forestry Item ID: Union Grove Saw &47228 Knife.. 2, 37

Item ID: 83128 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

2012 Barko 920

Contact:Refiner AUSTIN................... 23 Universal Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom and 36" top saw Johnsaw Deere 648G3

Item ID: 99831

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Barko 595Ml Tracked Item ID: 43774

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 19

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

Sam Wall Grappleext. 702 (888) 401-6367 Item ID: 35810 sam@lumbermens.co

$46,500

SOUTHWEST FOREST PRODUCTS Item ID: 53095 EXPO Fri, 25 August - Sat, 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

‘16 Halverson H140 Skidsteer (DEMO) Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

‘93 Barko 180B

Item ID: 14077 Contact: Austin Ph: (888) 401-6367 x703

‘95 John Deere C6 Tree Farmer ‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

well built processor. Item ID 13820. Sam x702

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Best Value Portable Log Splitter - Small manufacturer in PA has

made the best valued log splitter.

a Chomper Model 16 PDA

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. Sam x702

LOGGING EQUIPMENT BANDIT

Handles logs up to 32”. Uses

1999 Bandit 1900 Tracked Disc

but electronic option is available.

50% or better. 475 hp Cummins

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine with 850 HP. 5300 hrs. Mill in

Item ID: 13920 Contact: Austin Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours.

(excellent condition.). Item ID 13238. Chris x700

1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

meter dont work. The last 2 owners have only used it to load trucks or

as a backup as needed. Has a CTR

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

BELL

good condition. Just finished 10

1990 Bell Super T - This Bell has

Remote control. Big production

control, 33” bar, pump and tranny

Acre clearing job, ready to work!

 List  seLL  exchange  buy  save

a brand new Duetz engine. Lever

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 21


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 540B Item ID: 0908

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 650H LGP Item ID: 84627

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

CatHalverson 939 Crawler Loader ‘16 H140 Item ID: 92188 Skidsteer (DEMO) Contact: SAM Item ID: JW-909632 Email: Sam@lumbermensco.com Phone: 888-401-6367 Contact: J Williams EXT 702

‘93 Barko 180B ‘03 John Deere 748GIII

Item ID:Item 14077 ID: 13851 Contact: Austin Contact: SAM Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Ph: (888) 401-6367 x701

Cat 535C Grapple Skidder Item ID: 50218

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2007 Cat 517

John Deere 540D

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com ‘13 KMC 2500 EXT Track Phone: 888-401-6367 702

Item ID: 60554

Item ID: 83019

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Michagan Wheel Loader

Item ID: 99929 with 1700 hours, in very good Contact: SAM condition. Easily produces high Email: Sam@lumbermensco.com Phone:chips 888-401-6367 EXT‘Cone’ 702 quality with patented drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Item ID 13644.230 SamCable x702 Skidder Timberjack Item ID: 51788 FIREWOOD PROCESSORS Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 392

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2009 2384 Prentice Knuckleboom Loader

Item ID: 5613

off onto a conveyor. This is a very

83’ John Deere 740A

well built processor. Item ID 13820.

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 931-797-8029 automatice firewood processor

Item ID: 95074

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

95 Timberjack 450 Best Dual Value Portable Log Splitter Arch Skidder Item ID: 12270 - Small manufacturer in PA has

2017 Tigercat 630E

Sam x702 Item ID: 84473

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Barko 395ML

Sam x702

Item ID: 99943

LOGGING EQUIPMENT Contact: WALKER Email: Walker@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 707

‘95Franklin John Deere C6 Mulcher ID: 99927 TreeItem Farmer

Item ID:SAM 13920 Contact: Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

grapple, 5,000 original hours. 2003 Tigercat 250 Log Loader Item ID: 46268 (excellent condition.). Item ID

Contact: WALKER 13238. Chris x700 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately 1500 hours. Log Max 7000Hour Item ID: 96628 meter dont work. The last 2 owners

Phone: 888-401-6367 931-797-8029 Handles logs up EXT to 703 32”.ORUses

OR 931-797-3915 1999 Bandit 1900 Tracked Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703 931-797-8029 delimber, grapple has been rebuilt.

but electronic option is available.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

made the best valued log splitter. Contact: AUSTIN Email: Austin@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ Cat D5H LGP Itema ID: 64808 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Caterpillar engine 2013 John Diesel Deere 437D Item ID:hrs. 96805 with 850 HP. 5300 Mill in

good condition. Just finished 10 Contact: AUSTIN Email: Austin@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 703 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Tigercat 630C Item BELL ID: 83971

1990 Bell Super T - This Bell has Contact: AUSTIN Email: Austin@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

1997 Timberjack 460 Cable Skidder

Item ID: 91657

Item ID:24393

The Tree

Contact: WALKER Email: Walker@lumbermensco.com that Started Phone: 888-401-6367 EXT 707

it All!

Item ID: 37092

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

SOUTHWEST FOREST PRODUCTS Item ID: 52045 EXPO Fri, 25 August - Sat, 26 August Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Hot Springs, Arkansas Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.arkloggers.com OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Tree Farmer Grapple - Cable Skidder Woods Publishing

Peterson Chipper

Timberjack 460 Dual Arch

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Clark 667

Item ID: 59500 MID-ATLANTIC

LOGGING & BIOMASS EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Selma, JD North Carolina 437D loader www.midatlantic-logging-biomass­ Item ID: 35922 expo.com/

MARKETING DIRECTOR

Contact: AUSTIN Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall John Deere 440C (888) 401-6367 ext.Cable 702 Skidder sam@lumbermens.co

Item ID: 30080 Austin Woods

Contact: SAM401-6367 ext. 703 (888) Email: Sam@lumbermensco.com austin@lumbermens.co Phone: 888-401-6367 EXT 702

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

JohnPOSTMASTER Deere 440A Send address changes to: Cable Skidder

Lumberman's Exchange Item ID: 99941 P.O. Box 1916 Contact: WALKER Columbia, TN 38402 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 The Lumberman's OR 931-797-3915 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Hood 28000 and writers, the Lumberman's Item ID: 18775 Exchange, its principles and associates, are not held liable for Contact: AUSTIN Reproduction, errors or omissions. Email: Austin@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 703 consent. out written 931-797-8029 ©2017 Woods Publishing

John Deere 437D Log Loader Item ID: 8834

Cambridge, Ohio www.ohioforest.org

‘06 CAT 517

Item ID: 13869

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2054 John Deere Processor Log Loader

BANDMILLS & HEADSAWS Item ID: 73244

Danckaert Band Resaw - Roughly Contact: AUSTIN

10 hours on this machine since it Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

has been rebuilt, it has a 24foot in OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting Transport Trailers Custom Logwheel Pup is supported on both sides. This Item ID: JW-538174

is an extremely accurate machine Contact: SAM in ve1y Sam@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 7021 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to240B run. Item ID 13434. Tigercat Knuckle

Sam x702Boom Loader Item ID: 76297

CARRIAGES & DRIVES

Contact: SAM 2010 Cardinal HD Carriage Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Corley Mfg 32 Item.............................. ID: 62252

Item ID: 99946 Multitek ................................... 12

John Deere 750J Buck Equipment (AIM) ........ 36 Forestry Dozer

2005 PRENTICE 210E Morbark ..................................... 9 LOG LOADER Contact: WALKER

Piper's Saw Shop.................... 13 Email: Walker@lumbermensco.com

CRD Metalworks .................... 25 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 CW Mill-ArmorHog .............. 17

OR 931-797-3915 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. John Deere 437D 14 Item ID: 10075 Iron Bull ................................... 21 Contact: AUSTIN Kilgore Saw ............................. 22 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ................................. 24 Lignomat 931-797-8029

Thomas Industrial Controls..... 10

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Phone: 888-401-6367 EXT 707

John Deere 648D

Item ID:&99942 Union Grove Saw Knife.. 2, 37 Contact: WALKER Universal Refiner ................... 23 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 WoodMizer ................................ l OR 931-797-3915

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" and 36" top saw '13bottom KMC saw 2500 Tack Skidder Item ID: 14078

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2013 John Deere 748H Item ID: 85729

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 23

L O G G I N G

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams FEATURED! (888) HOT-BUY! 401-6367 ext. 701 j@lumbermens.co

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Tigercat T240B

Tigercat 630C

Item ID: 4266

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99947

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Cat 573

Item ID: 59580 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 Item ID: JW-909632 EXT 703 Contact: ORJ Williams 931-797-8029

1988 John Deere ‘93 Barko 180B540D Item ID: 727

Item ID: 14077 Contact: Contact:AUSTIN Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

931-797-8029

Ph: (888) 401-6367 x701

Tigercat 630 C Dual Arch Item ID: 10836

L O G G I N G

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Morbark 23 disc chipper Item ID: 99944

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

SATCO 318T processing head Item ID: 99945

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

1991 Timberjack 450B Item ID: 1826

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 2015401-6367 Cat 563C Item ID: 72531

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXThigh 703 OR with 931-797-8029 quality chips patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

Timberjack 380C FIREWOOD PROCESSORS Item ID: 72259

2010 Shop Built Wood Processor Contact: WALKER -Email: It has Walker@lumbermensco.com a 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30 707 inch insert tooth circle saw, foot  Issue 364 392

John Deere 648l Item ID: 96378

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

Excavator 330Lx Link Belt

Best ValueItem Portable Log Splitter ID: 70897 AUSTIN -Contact: Small manufacturer in PA has

Email: Austin@lumbermensco.com Phone:the 888-401-6367 EXTlog 703 splitter. made best valued OR 931-797-8029

well built processor. Item ID 13820.

John Deere 437D Sam x702 Item ID: 99939 Firewood Processor - This is

Firewood Processor - This is a

‘00 Timbco homemade processor 445D with a 10’

Item ID: 14096 log deck. Has a hydraulic grapple, Contact: AUSTIN chain and kicker that all runs off Email: Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

2008 Barko 495 ML

grapple, 5,000 hours. Itemoriginal ID: 7648

on injection pump. always started

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Timbco Sam x702 425EXL Barsaw Item ID: 74878 LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

50% or better. 475 hp Cummins

Value! PA. Item ID 12062. Sam x702

Ph: (888) 401-6367 x703

low hours. Control panel includes

Phone: 888-401-6367 EXT 707

but electronic option is available.

adjustable to single two way. Great

Contact: AUSTIN Item ID: 13920 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: Austin OR 931-797-8029

automatice firewood processor OR 931-797-3915

1999 Bandit 1900 TrackedEXT Disc Phone: 888-401-6367 702

Has Log Lift. Uses 4-way wedge

ID: 51519 TreeItem Farmer

(excellent Contact:condition.). AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher

Contact: WALKER

aEmail: Chomper Model 16 PDA Walker@lumbermensco.com

Handles logs up to 32”. Uses

13HP Honda motor. Manual start

‘95Loader/ JohnExcavator Deere 225 C6LC Log

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

3412 Diesel engine '01Caterpillar John Deere 648G3 Item ID:hrs. 90899 with 850 HP. 5300 Mill in good condition. Contact: SAM Just finished 10 Email: Sam@lumbermensco.com Acre clearing job, ready to work! Phone: 888-401-6367 EXT 702 Remote control. Big production

 List  seLL  exchange  buy  save

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

540B John DeereHour approximately 1500 hours.

Cable Skidder

meter dont work. The last 2 owners Contact: WALKER have used it to load trucks or Email:only Walker@lumbermensco.com

Phone: 888-401-6367 707 as a backup as needed.EXT Has a CTR or 931-797-3915

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

Timbco 425C Item BELL ID: 99948

1990 Bell Super T - This Bell has Contact: WALKER

Walker@lumbermensco.com aEmail: brand new Duetz engine. Lever Phone: 888-401-6367 EXT 707

OR 931-797-3915 control, 33” bar, pump and tranny

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

MOST WANTED!

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Cat 527 Swingboom Grapple Skidder Dozer Item ID: 99841

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All!

Boonville, New York www.starwebhosting.net/woodsmen/

2001 John Deere 435 Item ID: 7100

Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 931-797-8029 www.arkloggers.com OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Prentice 2190 Woods Publishing Item ID: 28889

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Selma, Timberpro North Carolina620 Tigercat 845 www.midatlantic-logging-biomass­ Item ID: 79674 Item ID: 8139 MID-ATLANTIC

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

FEATURED!

Donna Heninger

Sam Wall Morbark 30XL (888) 401-6367 ext. 702 Item ID: 13937 sam@lumbermens.co

Contact: Austin SAM Woods Email:(888) Sam@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 702 austin@lumbermens.co

MAILING ADDRESS

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR EQUIPMENT REPS

expo.com/

LOGGING & BIOMASS EXPO

Contact: AUSTIN Contact: AUSTIN Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com WOOD EXPO Phone: 888-401-6367 EXT 703 KENTUCKY Phone: 888-401-6367 EXT 703 931-797-8029 Sept931-797-8029 Fri, 15 - Sat, 16 Sept

Tracked Log Picker/ Skidder Equipment Item ID: 99859

Cambridge, Ohio www.ohioforest.org

VALMET 840.2 FORWARDER Item ID: 9770

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

CAT 525C

Item ID: 4091 BANDMILLS & HEADSAWS

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 931-797-8029 has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Excavator w/Ryan DS 28 Felling Head

is supported on both sides. This Item ID: 76226 is an extremely accurate machine Contact: AUSTIN Email: in ve1y Austin@lumbermensco.com good condition, Cuts 130 Phone: 888-401-6367 EXT 703 feet also has CLT presses. a minute 931-797-8029 Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run.Grapple Item ID 13434. Cat 525D

w/Winch Sam skidder x702 Item ID: 99857 CARRIAGES & DRIVES Contact: SAM HD Carriage 2010 Cardinal Email: Sam@lumbermensco.com

Phone: 888-401-6367 702 Carriages (Sawmill)EXT - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

carriage knees, husk including

Timberpro TF830D Buck Equipment (AIM) ........ 36

Midwest Sharpening.............. 26

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

John Deere 650G to: Send address changes Item ID: 99852 Lumberman's Exchange P.O. Box 1916 Contact: WALKER Email: Walker@lumbermensco.com Columbia, TN 38402 Phone: 888-401-6367 EXT 707 OR 931-797-3915

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers 525 and writers, CAT the Lumberman's ID: 99853 Exchange,Item its principles and associates, are not held liable for Contact: WALKER errorsWalker@lumbermensco.com or omissions. Reproduction, Email: in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 707 out written OR 931-797-3915 consent. ©2017 Woods Publishing

Combo machine

Corley Mfg .............................. 32 Item ID: 1360 CRD Metalworks .................... 25 Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 CW Mill-ArmorHog .............. 17

‘00 ..................................... Timberjack 1110 9 Morbark Item ID: 14033 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Cat 517 Hurst Boiler ............................. 14

Item ID: 20725 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial ..... 10 Serco 7000Controls Loader

Item ID:&40498 Union Grove Saw Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

WoodMizer l OR................................ 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw Franklin Q70 Item ID: 5458

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Hydro Ax 611E Item ID: 58544

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 25

L O G G I N G

MARKETING DIRECTOR

98’ Timberjack 240 C

Item ID: 99838 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, Contact: AUSTIN 26 August

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

John Deere 548D

John Deere 640D

Item ID: 64196

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99845

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Franklin 170

L O G G I N G

Item ID: 99839 ‘16 Halverson H140 Contact: AUSTIN (DEMO) Skidsteer Email: Austin@lumbermensco.com Phone: EXT 703 Item 888-401-6367 ID:ORJW-909632 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 99856 Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

‘13 KMC 2500 Track Skidder Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

'93 John Deere 548E

Prentice 180

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 CTL 70 ‘05 Gehl 931-797-8029

Firewood Contact:Processor AUSTIN - This is Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 931-797-8029 automatice firewood processor

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 848 G Grapple Skidder Item ID: 85843

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXThigh 703 931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Treefarmer C5D Item ID 13644. Sam x702Skidder Item ID: 17115

FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT40703 -Phone: It has a 353 Detroit diesel, 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703 Prentice

210 E

Best ValueItem Portable Log Splitter ID: 98009

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the best valued log splitter. Phone: 888-401-6367 EXT 703 931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’

2011 Cat 525C

log deck. Item Has a ID: hydraulic 26688 grapple,

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Tigercat 615C

Sam x702 Item ID: 17058

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865. 1994 Timberjack 240 Item ID:74044 Sam x702

Contact: ItemAustin@lumbermensco.com ID:AUSTIN 13920 Email: Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

BARKO

well built processor. Item ID 13820.

Item ID: 7822

931-797-8029

capacity!. Item ID 13421. Sam x702

off onto a conveyor. This is a very Item ID: 14184

Item ID: 14077 Contact: AUSTIN Contact: Austin Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703

‘95 Deere700J C6 09’John John Deere Item ID: 48601 Tree Farmer

CAT 515

Item ID: 50512

Prentice 950B ‘9307 Barko 180B Item ID: 5368

Contact: J Williams Ph: (888) 401-6367 x701

John Deere 650H

Item ID: 99827

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 OR 931-797-3915

Cat D6K2 XL

B

LOGGING EQUIPMENT Contact: WALKER Email: Walker@lumbermensco.com BANDIT Phone: 888-401-6367 EXT 707 1999 Bandit 1900 Tracked Disc Chipper - Cat Under Carriage at 50% or better. 475 hp Cummins

Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

'04 John Deere 700H 3412 Caterpillar Diesel engine

Item ID: 14187 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous

96’ Hydro ax 611E

grapple, 5,000 hours. Itemoriginal ID: 4654

(excellent Contact:condition.). AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

John Deere 648G3The Grapple meter dont work. last 2Skidder owners Item ID: 51014 have only used it to load trucks or Contact: SAM

as a backup as needed. Has a CTR Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x7022010 Tigercat 724E Item ID: 14247

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

John Deere 540D Cable Skidder Item ID: 99277

The Tree Contact: SAM Email: Sam@lumbermensco.com that Started Phone: 888-401-6367 EXT 702 it All! Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

CAT D4GPublishing Skidder Woods Item ID: 99864

ADVERTISING SALES

Morris Woods Contact: AUSTIN Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

Boonville, New York www.starwebhosting.net/woodsmen/ Treefarmer C7T GM JD 648 G3 Grapple Skidder Grapple/Winch Skidder Item ID: 4572

SOUTHWEST FOREST PRODUCTS Item ID: 11726 EXPO Fri, 25 August Sat, 26 August Contact: AUSTIN

Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 www.arkloggers.com 931-797-8029 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Prentice 2432 (’09) Fri, 15 Sept - Sat, 16 Sept Item ID: 89885

Franklin Forwarder Selma, North155B Carolina Item ID: 10700 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

MID-ATLANTIC Contact: JOE LOGGING & BIOMASS EXPO Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Prentice 180E (888) 401-6367 ext. 702 sam@lumbermens.co Item ID: 99846 Austin Woods Contact: WALKER Email: Walker@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 707 austin@lumbermens.co OR 931-797-3915

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

SendDeere address640D changes to: John Cable Lumberman's Exchange Skidder P.O. ID: Box43930 1916 Item

Columbia, TN 38402

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's John Deere 648H Grapple Exchange, its principles and w/Winch Equipment associates, are not held liable for Item ID: errors or omissions. 99849 Reproduction, in whole or part, is prohibited with­ Contact: SAM Email: Sam@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

Fri, 15 Sept - Sat, 16 Sept

Rayco 160 Forestry Mulcher Item ID: 77447

Cambridge, Ohio www.ohioforest.org

John Deere 450H LGP

** INFO LINK**

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Item ID: 99891

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

96’ John Deere 643D

BANDMILLS & 14207 HEADSAWS Item ID:

Danckaert Resaw - Roughly Contact: Band AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 been rebuilt, 931-797-8029 has it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressureHydro guides. Top AxCasting 411 wheel Item ID: 98954 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Cat 559B Knuckle Loader

Sam x702 Boom

Item ID:&99872 CARRIAGES DRIVES

2010 Cardinal Contact: SAM HD Carriage Email: Sam@lumbermensco.com

Carriages (Sawmill)EXT - Cardinal Phone: 888-401-6367 702 Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Buck Equipment (AIM) ........ 36 2014 Prentice 2210

Morbark 08’..................................... Valmet 415EX 9 Item ID: 99923 Multitek ................................... 12

“Self Corley Mfg Propelled” .............................. 32 Item ID: 99900 CRD Metalworks .................... 25 Contact: AUSTIN

Email: Austin@lumbermensco.com CW Mill-ArmorHog 17 Phone: 888-401-6367 EXT 703 OR.............. 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 OR 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial ..... 10 Timberjack 225Controls Cable Skidder

John Deere 135D Iron BullExcavator ................................... 21

Item ID: 99850 Kilgore Saw ............................. 22

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Item ID:&99817 Union Grove Saw Knife.. 2, 37

Universal Contact:Refiner AUSTIN................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 WoodMizer ................................ l 931-797-8029

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

John Deere 650G Item ID: 99928

STACKING RAC

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Bell Ultra-C Tracked Cutter Item ID: 46567

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

www.BakerProducts.net 800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 27

L O G G I N G

MARKETING DIRECTOR

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO 931-797-8029

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Timbco 425Exl

Hydro AX 721E

Item ID: 84253

Item ID: 99826

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Item ID: 25974 ‘16 Halverson H140 Contact: SAM Skidsteer (DEMO) Email: Sam@lumbermensco.com

Item ID: JW-909632 EXT 702 Phone: 888-401-6367 Contact: J Williams Ph: (888) 401-6367 x701

Barko 495B

John Deere 648G3

‘89 Timberjack 380A

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track 931-797-8029

Item ID: 58995

Item ID: 44764

L O G G I N G

Log Loader

Item ID: 14039

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

Tigercat 604 Cable Skidder Item ID: 6552

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 John Deere 650Kx703 LGP

Forestry Dozer

CAT 525C

Item ID: 13443 Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘05 Gehl CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701 chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. x703 ‘98Austin 611 Ex-Hydro Ax Item ID: 13948 Best Value Portable Log Splitter

Timberpro TL735B well built processor. ItemTracked ID 13820. Sam x702Feller Buncher

Item ID: 64107 Firewood Processor - This is Contact: SAM

aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

‘85 440D new forJohn $32,500.Deere Item ID 13865. Item ID: 12453

Contact: SAM condition. Easily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 ‘Cone’ quality chips with patented

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 OR up 931-797-8029 Handles logs to 32”. Uses

Sam x702 Contact: AUSTIN LOGGING EQUIPMENT Email: Austin@lumbermensco.com Phone: 888-401-6367 BANDIT EXT 703 OR 931-797-8029 1999 Bandit 1900 Tracked Disc

vans and produce 6 - 8 loads per

but electronic option is available.

50% or better. 475 hp Cummins

with 1700Item hours,ID: in 85213 very good

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

'97 Hydro AX-411 EXx702 Bar Saw Head Item ID 13644. Sam Item ID: 98754

FIREWOOD PROCESSORS

Contact: SAM Wood Processor 2010 Shop Built Email: Sam@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40702 inch insert tooth circle saw, 30 foot  Issue 364 392

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2011 CAT 525C homemade processor with a 10’

Item ID: 14203 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 703 of a 4 cylinder MercedesEXT power 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

Tigercat 3412 ‘05 Caterpillar Diesel 230B engine

Item ID: 13911 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! OR 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

‘93 180B 2001Barko Cat 311CU Processor/

Harvestor - Fabtech head Item ID: 14077 Item ID: 99821 Contact: Austin Ph: (888) 401-6367 x703 Contact: AUSTIN

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

‘95 John Cable Deere SkidderC6 Item ID: 5597 Tree Farmer

Contact: AUSTIN Item ID: 13920 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Contact: Austin OR 931-797-8029

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp motor, Rotobec continuous JD 648H (’08)

grapple, 5,000 hours. Itemoriginal ID: 6051

(excellent condition.). Item ID Contact: JOE Email: Joe@lumbermensco.com 13238. Chris x700

Phone: 888-401-6367 EXT 709

OR 801-362-2170 1995 Barko 775 B Feller Buncher

- Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours. Hour 648 G1500 Skidder Item ID: 76963 meter dont work. The last 2 owners have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703 931-797-8029 delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702 John Deere 640D Item ID:63000

BELL

Contact: WALKER 1990 Bell Super T - This Bell has Email: Walker@lumbermensco.com aPhone: brand new Duetz engine. 888-401-6367 EXTLever 707 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York

2003 CAT 525B Item ID: 3800

The Tree

Contact: WALKER that Started Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

it All!

JD 640D (’95) www.starwebhosting.net/woodsmen/ CAT 525D Item ID: 51746

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

‘80Woods John Deere 550 Publishing Item ID: 14037

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

Email: Joe@lumbermensco.com Hot Springs, Arkansas Phone: 888-401-6367 EXT 709 www.arkloggers.com OR 801-362-2170

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER

Item ID: 9555 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact: JOE

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

Tigercat 234B Knuckle Selma, ‘80North JohnCarolina Deere 540B boom loader www.midatlantic-logging-biomass­ Item ID: 11345 MID-ATLANTIC Item ID: 99820

expo.com/ Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029

LOGGING & BIOMASS EXPO

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Wall437C John Sam Deere

(888)Item 401-6367 ext. 702 ID: 1020 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 (888) 401-6367 ext. 703 OR 931-797-8029 austin@lumbermens.co

MAILING ADDRESS

‘80 John Deere 550 Item ID: 14037

Cambridge, Ohio www.ohioforest.org

648 E Cable Skidder Item ID: 87791

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

John Deere 548G3

BANDMILLS & HEADSAWS Item ID: 985

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: Austin@lumbermensco.com 10 hours on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck

with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

‘05 Timberjack 608B

is supported onID: both sides. This Item 13898 is an extremely accurate machine Contact: SAM in ve1y Sam@lumbermensco.com good condition, Cuts 130 Email: Phone: 888-401-6367 EXT 702 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Timberjack 1270C

Sam x702 Item ID: 8676

CARRIAGES & DRIVES

Contact: JOE

Email: Joe@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 709

OR 801-362-2170 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Cat D4H TSK Grapple w/ Buck Equipment (AIM) ........ 36 Winch Equipment

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

John Deere Logger Send address changes to:

Item ID: 82959 Lumberman's Exchange P.O. Box 1916 Contact: SAM Columbia, TN 38402

Email: Sam@lumbermensco.com Phone: 888-401-6367 EXTis702 The Lumberman's Exchange

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content by Grapple advertisers Cat submitted D5H TSK and writers, the Lumberman's Winch Dozer Exchange, its principles and Item ID:held 99809 associates, are not liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent. EXT 702 Phone: 888-401-6367 ©2017 Woods Publishing

FEATURED HOT-BUY!

425D MorbarkTimbco ..................................... 9

CW Mill-ArmorHog .............. 17

Item ID: 98053 Multitek ................................... 12 Contact: AUSTIN Email: Austin@lumbermensco.com Piper's Saw Shop.................... 13 Phone: 888-401-6367 EXT 703 931-797-8029 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Item.............................. ID: 99843 Corley Mfg 32

Contact: SAM CRD Metalworks .................... 25 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John 85D 14 Hurst BoilerDeere .............................

Item ID: 48169 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. 22 Phone: 888-401-6367 EXT 703 Lignomat 931-797-8029 ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

John Deere 700H Thomas Industrial Controls ..... 10 Item ID: 1324 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

PARTS Timberjack 450 C

48" bottom saw and 36" top saw Cable Skidder Item ID: 5077

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘08 John Deere 335C Item ID: 14089

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net OR 931-797-8029 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 29

L O G G I N G

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

07’ Tigercat 724E

John Deere 850K LGP

Item ID: 14218

Item ID: 99814

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 540G2 Cable Skidder Item ID: 53891

L O G G I N G

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘02 Jackson Shavings Mill Item ID: 13736

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

2011 John Deere 648H Item ID: 14217

‘16 Halverson H140

Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com Phone: 888-401-6367 JW-909632 EXT 703 Item ID: 931-797-8029

Contact: J Williams Ph: (888) 401-6367 x701

2004 Timbco 445EXL Item ID: 14170

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track 931-797-8029

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

off onto a conveyor. This is a very

2016 Tigercat 604 E Cable Skidder

532 CAT Feller Buncher

well builtTimbco processor.820D Item ID 13820.

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl OR 931-797-8029 CTL 70

Firewood Contact:Processor AUSTIN - This is Email: Austin@lumbermensco.com aPhone: Chomper Model 16 PDA 888-401-6367 EXT 703 931-797-8029 automatice firewood processor

Item ID:55393

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) x703 16’ 401-6367 CAT 545D Item ID: 14211

with 1700 hours, in very good Contact: AUSTIN Email: Austin@lumbermensco.com condition. Easily produces Phone: 888-401-6367 EXThigh 703 931-797-8029 quality chips with patented ‘Cone’ drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

93’ Prentice Item ID 13644. Sam x702210 Item ID: 14216 FIREWOOD PROCESSORS

Contact: AUSTIN 2010 Shop Built Wood Processor Email: Austin@lumbermensco.com 888-401-6367 EXT40703 -Phone: It has a 353 Detroit diesel, 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 392

Item ID: 14079

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. 10’Austin Johnx703 Deere 648H ID: 14210 Best ValueItem Portable Log Splitter

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 931-797-8029 Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processor with a 10’ 12’ John Deere 437D Itema ID: 14209 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

Sam x702 Item ID: 18370

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

John Deere 437E new for $32,500. Item ID 13865.

Knuckleboom Loader Sam x702 Item ID: 63181 LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

Fabtek 344B ‘93 ‘04 Barko 180B

ID: JW-093430 Item Item ID: 14077 Contact:SAM Austin Contact: Ph: (888) 401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

John Deere 700K LGP ‘95 John Deere C6 Dozer Tree Farmer Item ID: 3674

Item ID: 13920 Contact: SAM Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 EXT 702

Ph: (888) 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous 07’ Tigercat 620C Itemoriginal ID: 14248 grapple, 5,000 hours.

(excellent Contact:condition.). AUSTIN Item ID Email:Chris Austin@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours. Hour 12’ John 1500 Deere 843K Item ID: 14212 meter dont work. The last 2 owners

Phone: 888-401-6367 EXT 702 1999 Bandit 1900 Tracked Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine JD 643G Item ID:hrs. 80565 with 850 HP. 5300 Mill in

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702John

Deere 650H LGP Forestry BELLDozer Item ID: 99810

good condition. Just finished 10 Contact: JOE

1990 Bell Super T - This Bell has

OR 801-362-2170 Remote control. Big production

control, 33” bar, pump and tranny

Email: Joe@lumbermensco.com

Acre clearing job, ready work! Phone: 888-401-6367 EXTto709

 List  seLL  exchange  buy  save

Contact: SAM

aEmail: brandSam@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 702

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Timberjack 380C Item ID: 410

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started OR 931-797-8029

90's Model Timberjack 240A Yanmar VIO27-2 mini-x Item ID: 14111 Item ID: 42920 EXPO SOUTHWEST FOREST PRODUCTS Fri, 25 August Sat, 26 August Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

John Deere 200D Woods Publishing Excavator

ADVERTISING SALES Item ID: 2959

Morris Woods Contact: SAM401-6367 ext. 704 (888) Email: Sam@lumbermensco.com morris@lumbermens.co Phone: 888-401-6367 EXT 702

Contact: SAM

Hot Springs, Arkansas Email: Sam@lumbermensco.com www.arkloggers.com Phone: 888-401-6367 EXT 702

CAT 140G

MID-ATLANTIC Item ID: 93592

LOGGING & BIOMASS EXPO

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

01’ Ponsee Forwarder Selma, North Bison Carolina Item ID: 14109 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

MARKETING DIRECTOR

Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Tigercat (888) 401-6367604 ext. 702 Item ID: 7436 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email:(888) Austin@lumbermensco.com 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co 931-797-8029

MAILING ADDRESS

‘93 John Deere 548E Item ID: 14083

Cambridge, Ohio 540B John Deere www.ohioforest.org

Cable Skidder

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 or 931-797-3915

Tigercat 234 Knuckle Boom Loader Item ID: BANDMILLS & 68516 HEADSAWS

Danckaert Band Resaw - Roughly Contact: SAM 10 hoursSam@lumbermensco.com on this machine since it Email: Phone: 888-401-6367 702 has been rebuilt, it has a EXT 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel

Barko 160B Self-

is supported on bothLoader sides. This Propelled

Item accurate ID: 99812 is an extremely machine

in ve1y good Contact: SAM condition, Cuts 130 Email: Sam@lumbermensco.com

feet a minute also has Phone: 888-401-6367 EXTCLT 702 presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400

2012toCat hours ready run.D6K ItemXL ID 13434. Item ID: 14169 Sam x702 Contact: AUSTIN& DRIVES CARRIAGES Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 2010 Cardinal HD Carriage OR 931-797-8029 Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

May be sent to­ morris@lumbermens.co

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

POSTMASTER

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

JD 648G Grapple Skidder Buck Equipment (AIM) ........ 36

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

Phone: 888-401-6367 EXT 703 The Lumberman's OR 931-797-8029 Exchange is

published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers Breezewood Band Mill and writers, the Lumberman's Exchange,Item its principles and ID: 83736 associates, are not held liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

Item ID: 54867 Corley Mfg .............................. 32

Contact: AUSTIN Email: CRDAustin@lumbermensco.com Metalworks .................... 25 Phone: 888-401-6367 EXT 703 931-797-8029

Morbark ..................................... 9

Trail King 60 Ton Lowboy

Multitek ................................... 12 Item ID: 56166

Piper's Contact:Saw SAM Shop.................... 13 Email: Sam@lumbermensco.com

CW Mill-ArmorHog .............. 17

Phone: 888-401-6367 EXT 702 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

John Deere 859M Hurst Boiler ............................. Tracked Cutter w/ 14 Quadco 3200 Barsaw 21 Iron Bull ...................................

Item ID: 31379 Kilgore Saw ............................. 22

Contact: SAM Email: Sam@lumbermensco.com Lignomat ................................. 24 Phone: 888-401-6367 EXT 702

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Thomas Industrial Controls ..... 10 2010 Baker 3665D

Item ID:&99964 Union Grove Saw Knife.. 2, 37 Contact: AUSTIN Universal Refiner ................... 23 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703

931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom 36" top saw Cook 3238saw HD and Portable Sawmill Item ID: 90653

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Woodmizer LT300 Item ID: 99975

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 www.BakerProducts.net 931-797-8029

800.S48.6914 I S73.663.7711

❘ L!  (888) 401-MENS 401-MENS

NO. 31

S A W M I L L

06’ address Franklin Q80to: Send changes Item ID: 14214 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

L O G G I N G

it All!

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Baker Double End Trim Saw

Baker Notcher

Item ID: 49890

Item ID: 49307

‘93 Real Barko Tuff180B Bagger

Item ID: 50281 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Hud-Son 360 Portable Sawmill

Woodmizer LT40 Hydraulic

Cornell Double End Trim Saw

‘95Fast John DeereSystem C6 Go Run Around

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track OR 931-797-8029

Item ID:SAM 13920 Contact: Email: Sam@lumbermensco.com Contact: Austin Phone: 888-401-6367 702 Ph: (888) 401-6367 EXT x703

Item ID: 7516

Item ID: 8841

S A W M I L L

Meadows #2 Deluxe

Item ID: 14250 ‘16 Halverson H140 Contact: AUSTIN Skidsteer (DEMO) Email: Austin@lumbermensco.com

03’ Woodmizer LT-300 Operation

Desjardin Shingle Mill

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029 ‘05 Gehl CTL 70

‘83 John Deere 4850 HOT BUY! Item ID: 14073 HOT BUY! Contact: HOT BUY! Austin

Ph: (888) 401-6367 Cook's AC-36 &x703 AP-4

Sawmill & Edger

with 1700Item hours,ID: in 62024 very good

Item ID: 63655

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. x703 '02 Austin WoodMizer

LT-40

ID: 11345 Best ValueItem Portable Log Splitter

Phone: 888-401-6367 EXT 702 ‘Cone’ quality chips with patented

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 OR up 931-797-8029 Handles logs to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

Contact: SAM condition. Easily produces high Email: Sam@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great. Item ID 13644. Sam x702

Hurdle 2 Sawmill FIREWOOD PROCESSORS Item ID: 72999

2010 Shop Built Wood Processor Contact: SAM -Email: It has aSam@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT30702 inch insert tooth circle saw, foot  Issue 364 392

Contact: J Williams Ph: (888) 401-6367 x701

Item ID: 6307

Skidder

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

Item ID: 14171

Phone: 888-401-6367 Item ID: JW-909632 EXT 703 OR 931-797-8029

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

Edmiston Complete Sawmill homemade processor with a 10’

Item ID: 14084 log deck. Has a hydraulic grapple, Contact: AUSTIN chain kicker that all runs off Email:and Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 of a 4 cylinder Mercedes power OR 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

off onto a conveyor. This is a very

Fence Post Processing Operation

Phone: 888-401-6367 EXT 703 OR 931-797-8029

Tree Item Farmer ID: 84282

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

Firewood Processor - This is Contact: AUSTIN Austin@lumbermensco.com aEmail: Chomper Model 16 PDA Phone: 888-401-6367 EXT 703 automatice firewood processor 931-797-8029

LT40 motor,Wood-Mizer Rotobec continuous Item ID: 13995 grapple, 5,000 original hours. Contact:condition.). AUSTIN Item ID (excellent Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 13238. Chris x700 OR 931-797-8029 1995 Barko 775 B Feller Buncher

low hours. Control panel includes

on injection pump. always started

well built processor. Item ID 13820. Sam x702 Item ID: 42175

with John Deere power unit with

tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Rogers 4 Headblock Circle Mill

Sam x702 Item ID: 23205

LOGGING EQUIPMENT

- Pumps recently redone. 400 hrs

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with approximately 1500 hours. Hour

Morbark Stac Trac

meter dont work. last 2 owners Item ID:The 64060

Contact: SAM BANDIT Email: Sam@lumbermensco.com Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has a CTR Phone: 888-401-6367 EXT 703 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 3412 Caterpillar Diesel engine

Blockbuster 18-20 with 850 HP. 5300 hrs. Mill inPlus Item ID: 4058 good condition. Just finished 10 Contact: SAM job, ready to work! Acre Email:clearing Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

Meadows #3 Complete Operation

x702

Item ID: 964

BELL

Contact: AUSTIN 1990 Bell Super T - This Bell has Email: Austin@lumbermensco.com 888-401-6367 EXTLever 703 aPhone: brand new Duetz engine. OR 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

Woodmizer Twin Blade Diesel Edger Item ID: 14191

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started OR 931-797-8029

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Precision Scragg Woods Publishing Item ID: 3607

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 931-797-8029 morris@lumbermens.co

Boonville, New York www.starwebhosting.net/woodsmen/ Mobile Dimensions

Danchaert Band Resaw Item ID: 13876

Model 12 Circle Saw SOUTHWEST FOREST PRODUCTS Item ID: 62784 EXPO Fri, 25 August - Sat, 26 August

Contact: AUSTIN Contact: SAM Email: Austin@lumbermensco.com Hot Springs, Arkansas Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 703 www.arkloggers.com Phone: 888-401-6367 EXT 702 OR 931-797-8029

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept ‘14 Hurdle 3-HD Block Sawmill Selma, '94 Barko Knuckleboom North160 Carolina Item ID: 13997

MID-ATLANTIC

Item ID: 14186 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING & AUSTIN BIOMASS EXPO Contact: Email: Austin@lumbermensco.com Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Phone: 888-401-6367 EXT 703 KENTUCKY WOOD EXPO OR 931-797-8029 OR 931-797-8029

Fri, 15 Sept - Sat, 16 Sept Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall S&W 125 High Production Mill (888)Item 401-6367 ext. 702 ID: 8019 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 OR 931-797-8029 austin@lumbermens.co

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

QualityPOSTMASTER 4 Head Trim Saw

Send Item address to: ID: changes 1559 Lumberman's Exchange Contact: AUSTIN P.O. Box 1916 Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 931-797-8029

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submittedLumber by advertisers Jackson andHarvester writers, the Lumberman's Circle Mill Exchange, its principles and Item ID: 2346 associates, are not held liable for errors or omissions. Reproduction, Contact: SAM in whole or part, is prohibited with­ Email: Sam@lumbermensco.com out written consent. Phone: 888-401-6367 EXT 702 ©2017 Woods Publishing

Woodmizer LT 3000 Operation Item ID: 10761

Cambridge, Ohio www.ohioforest.org

Sanborn Scragg Mill Item ID: 14050

** INFO LINK**

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Pendu Cut Off Saw

BANDMILLS & 10632 HEADSAWS Item ID:

Danckaert Band Resaw - Roughly Contact: AUSTIN Email: 10 hoursAustin@lumbermensco.com on this machine since it Phone: 888-401-6367 EXT 703 has it has a 24foot in been rebuilt, OR 931-797-8029 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel ‘13 Woodmizer 4000 Sawmill Item ID: 14000 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434.

Corinth American Sawmill

Sam x702 Item ID: 99844

CARRIAGES & DRIVES

Contact: AUSTIN

Email:Cardinal Austin@lumbermensco.com 2010 HD Carriage Phone: 888-401-6367 EXT 703

OR 931-797-8029 Carriages (Sawmill) - Cardinal

Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Cornell Edger

Buck Equipment (AIM) ........ 36 Item ID: 33423

Meadows 2 Deluxe Sawmill Mor bark ..................................... 9 Package Miner Edger

Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks .................... Phone: 888-401-6367 EXT 70325 931-797-8029 CW Mill-ArmorHog .............. 17

Phone: 888-401-6367 EXT 702 Rotochopper ............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

1996 Jackson Shavings Mill Hurst Boiler ............................. 14

Item ID: 1271 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 Lignomat OR................................. 931-797-8029 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

Multitek ................................... 12 Item ID: 45399 Piper's Contact:Saw SAM Shop.................... 13 Email: Sam@lumbermensco.com

Corley Complete Sawmill

Thomas Industrial Controls..... 10 Item ID: 14035 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

'02bottom Woodmizer LT-40 Super 48" saw and 36" top sawHD Item ID: 14118

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Baker Bandmill Item ID: 96085

Contact: SAM Email: Sam@lumbermensco.com www.BakerProducts.net Phone: 888-401-6367 EXT 702 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 33

S A W M I L L

MARKETING DIRECTOR

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Morbark Chipper

'93 KW 425 CAT Item ID:13342

M I S C E L L A N E O U S

Contact: WALKER Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707

Item ID: 43812

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘06 Cord King Model 60

Shop Built Wood Processor

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14068

Item ID: 14038

Item ID: 7422

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

'08 Dynamic Chipper

Item ID: 14196 with 1700 hours, in very good Contact: SAM condition. Easily produces high Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT‘Cone’ 702 quality chips with patented drum design. Can easily load 42’ vans and produce 6 - 8 loads per day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

‘15 Cord King M44 Item ID: 13961

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 ‘05 Gehl OR 931-797-8029 CTL 70

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID 13916. Austin x703

LT50 Wide, EG200 Edger, Best Value Portable Log Splitter Sharpener/Setter

Item ID: 70691

‘13 KMC 2500 Track Skidder

Contact: SAM Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702

off onto a conveyor. This is a very

well built processor. Item ID 13820. W6F Allied Systems Winch Sam x702 Item ID: 56032

Firewood Processor - This is Contact: SAM aEmail: Chomper Model 16 PDA Sam@lumbermensco.com Phone: 888-401-6367 EXT 702 automatice firewood processor

with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased

new $32,500. ItemArmy ID 13865. AM for General M818 Truck Item ID: 14576 Sam x702

Handles logs up toEXT 32”.702 Uses Phone: 888-401-6367

but electronic option is available.

50% or better. 475 hp Cummins

made theSAM best valued log splitter. Contact: Email: Sam@lumbermensco.com

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

2010 Shop Built Contact: SAM Wood Processor -Email: It has aSam@lumbermensco.com 353 Detroit diesel, 40 Phone: 888-401-6367 EXT 702 inch insert tooth circle saw, 30 foot

chain and kicker that all runs off Contact: SAM of a 4 cylinder Mercedes power Email: Sam@lumbermensco.com Phone: 888-401-6367 unit. Has a 4’ chain saw EXT that 702 kicks

 Issue 364 392

Prentice 410EX truck mounted knuckle boom loader

Contact: WALKER LOGGING EQUIPMENT Email: Walker@lumbermensco.com BANDIT EXT 707 Phone: 888-401-6367 or 931-797-3915 1999 Bandit 1900 Tracked Disc

- Small manufacturer in PA has Item ID: 60876

Marmon Picker Truck Item ID 13644. Sam x702 & Pup Trailer Item ID: 59341 FIREWOOD PROCESSORS

Item ID: JW-909632 Contact: J Williams Ph: (888) 401-6367 x701

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703OR 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

1990 Freightliner

09 Rotobec Loader on

'87 Peterbuilt ‘16 Halverson H140 Item ID: 1101 Skidsteer (DEMO)

homemade processor with a 10’

4700 International Lube Truck

log deck. Item Has a ID: hydraulic 61127 grapple,

Lumbermens™  since 1986

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

2007 Morbark 3412 Caterpillar DieselChipper engine Item ID: 9658 with 850 HP. 5300 hrs. Mill in Contact: WALKER good condition. Just finished 10 Email: Walker@lumbermensco.com Phone: 888-401-6367 EXT 707 Acre clearing job, ready to work! or 931-797-3915 Remote control. Big production

 List  seLL  exchange  buy  save

‘93Case Barko 180B FLX437 Floater

ItemPicker ID: 14077 Log Truck Item ID: 18710 Contact: Austin Ph: (888) Contact: SAM401-6367 x703 Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

‘95 John58” Deere C6 Morbark LIKE NEW Item ID: 6114 Tree Farmer

Contact: ItemAustin@lumbermensco.com ID:AUSTIN 13920 Email: Phone: 888-401-6367 Contact: Austin EXT 703 Ph: (888) OR401-6367 931-797-8029 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec GBN continuous Patriot Nailer Itemoriginal ID: 99886 grapple, 5,000 hours.

(excellent Item ID Contact:condition.). SAM Email:Chris Sam@lumbermensco.com 13238. x700 Phone: 888-401-6367 EXT 702 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

CAT Generators approximately 1500 hours. Hour Item ID:The 56046 meter dont work. last 2 owners have only used it to load trucks or Contact: AUSTIN Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703 931-797-8029 delimber, grapple has been rebuilt. Boom cylinders have minor leaks. Item ID 13694. Sam x702

94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam x702

NovaBELL Dry Kiln

Item ID: 83618 1990 Bell Super T - This Bell has

SAM Duetz engine. Lever aContact: brand new Email: Sam@lumbermensco.com

Phone: 888-401-6367 EXT 702 control, 33” bar, pump and tranny

 LumbermensCO.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August

1973 Transcraft Drop Deck Log & Equipment Trailer Item ID: 39382

Contact: AUSTIN The Tree Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 that Started 931-797-8029

it All!

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

PUBLISHER Precision Chipper Woods Publishing

Item ID: 4524

F800 Boom Bucket Truck Item ID: 35784

CTR Stand Alone

SOUTHWEST FOREST PRODUCTS EXPO Delimber Fri, 25 August -Item Sat,ID: 267735 August

Contact: AUSTIN Email: Austin@lumbermensco.com Hot Springs, Arkansas Contact: SAM Phone: 888-401-6367 EXT 703 Email: Sam@lumbermensco.com www.arkloggers.com OR 931-797-8029 Phone: 888-401-6367 EXT 702

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 '10 SeptWoodsman - Sat, 16 Sept440 25' LOG PUP 4 BUNKS TRAILER Selma, Whole Chipper NorthTree Carolina Item ID: 8062

MID-ATLANTIC

Item ID: 14105 www.midatlantic-logging-biomass­ expo.com/ Contact: AUSTIN

LOGGING & JOE BIOMASS EXPO Contact: Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 801-362-2170

MARKETING DIRECTOR

Email: Austin@lumbermensco.com KENTUCKY WOOD EXPO Phone: 888-401-6367 EXT 703 Sept OR 931-797-8029 Fri, 15 - Sat, 16 Sept

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

EQUIPMENT REPS

Sam Wall Viking Trailer (888)Deloupe 401-6367 ext. 702 Item ID: 32415 sam@lumbermens.co

Contact: AUSTIN Austin Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 703 Phone: 888-401-6367 EXT 703 austin@lumbermens.co OR 931-797-8029

MAILING ADDRESS

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER Morbark Chipper

SendItem address changes to: ID: 80356 Lumberman's Exchange P.O. Box 1916 Contact: AUSTIN Email: Austin@lumbermensco.com Columbia, TN 38402

Phone: 888-401-6367 EXT 703 931-797-8029

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been madeMorbark to ensure accuracy of 2015 M20R content submitted by advertisers Forestry Track Chipper and writers, the Lumberman's ID: 12383 Exchange,Item its principles and associates, are not held liable for Contact: AUSTIN Reproduction, errors or omissions. Email: Austin@lumbermensco.com in whole or part, is prohibited with­ Phone: 888-401-6367 EXT 703 consent. out written 931-797-8029 ©2017 Woods Publishing

94’ Mack w/ Prentice 120 Item ID: 14215

Cambridge, Ohio www.ohioforest.org

Int'l 4300 Bucket Truck Item ID: 29129

** INFO LINK**

Bandit 1850 Chipper BANDMILLS & HEADSAWS Item ID: 80543

Danckaert Band Resaw - Roughly Contact: 10 hours onSAM this machine since it Email: Sam@lumbermensco.com has been rebuilt, it has a EXT 24foot in Phone: 888-401-6367 702 feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough

pressure guides. Top Casting wheel '99 Peterbilt Road Tractor Item ID: 14188 is supported on both sides. This AUSTIN isContact: an extremely accurate machine Email: Austin@lumbermensco.com in ve1y good condition, Cuts 130 Phone: 888-401-6367 EXT 703 OR 931-797-8029 feet a minute also has CLT presses.

Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready run. Item ID 13434. 1995to Fruehauf

Sam x702 Item ID: 69317

CARRIAGES Contact: AUSTIN& DRIVES Email: Austin@lumbermensco.com 2010 Cardinal HD Carriage Phone: 888-401-6367 EXT 703 931-797-8029 Carriages (Sawmill) - Cardinal

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Item ID: (AIM) 761 ........ 36 Buck Equipment

Morbark ..................................... 9 Item ID: 8256

MACK CHN613

Sun 4 Bolster Log Trailer

CW Mill-ArmorHog .............. 17

Contact: AUSTIN Multitek ................................... 12 Email: Austin@lumbermensco.com Piper's Shop.................... 13 Phone:Saw 888-401-6367 EXT 703 931-797-8029 Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Corley Mfg .............................. 32 Contact: AUSTIN Email: Austin@lumbermensco.com CRD Metalworks 25 Phone: 888-401-6367.................... EXT 703 OR 931-797-8029

Kenworth Log Truck Hurst Boiler ............................. 14

Item ID: 4849 Iron Bull ................................... 21 Contact: AUSTIN Email: Austin@lumbermensco.com Kilgore Saw ............................. Phone: 888-401-6367 EXT 70322 931-797-8029 Lignomat ................................. 24

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

3 Strand Log Deck

Thomas Industrial Item ID:Controls 14095 ..... 10 Union Grove Saw & Knife.. 2, 37 Contact: AUSTIN Email: Austin@lumbermensco.com Universal Refiner ................... 23 Phone: 888-401-6367 EXT 703 OR 931-797-8029 WoodMizer ................................ l

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

Carriage line it includes carriage with onboard log turners, carriage drive, hyd pac for carriage,

02’bottom Jackson Lumber 48" saw and 36"Harvester top saw Item ID: 1187

STACKING RAC

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Morbark 40/36 Item ID: 647

Contact: JOE Email: Joe@lumbermensco.com Phone: 888-401-6367 EXT 709 www.BakerProducts.net 801-362-2170 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 35

M I S C E L L A N E O U S

ADVERTISING SALES

Contact: AUSTIN Morris Woods Email: Austin@lumbermensco.com (888) 401-6367 ext. 704 Phone: 888-401-6367 EXT 703 morris@lumbermens.co 931-797-8029

Boonville, New York www.starwebhosting.net/woodsmen/

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com


TO VIEW DESCRIPTION, PRICING AND LOCATION - VISIT WWW.LUMBERMENSCO.COM

“Precision Under Pressure”

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

2009 Bandit 90XP PullBehind Wood Chippers

Tajfun Firewood Processor

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 OR 931-797-8029

Item ID: 14249

Item ID: 86220

Morbark 6036 Chipper

‘16 Halverson H140 Item ID: 75143 Skidsteer Contact: SAM (DEMO) Email: Sam@lumbermensco.com Item ID: JW-909632 Phone: 888-401-6367 Contact: J Williams EXT 702

FordBarko Bucket / 180B Boom Truck ‘93

Item ID: 80919 Item ID: 14077 Contact:AUSTIN Austin Contact: Email: Austin@lumbermensco.com Ph: (888) 401-6367 x703 Phone: 888-401-6367 EXT 703 931-797-8029

M I S C E L L A N E O U S

Ph: (888) 401-6367 x701

25 Ton Pintle Hitch Trailer Item ID: 99848

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 EXT 702

2015 Morbark M20R Forestry Track Chipper

Bandit Grinder - Chipper

Item ID: 12383

Item ID: 72593

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 703 ‘13 KMC 2500 EXT Track 931-797-8029

Item ID: 14078 Contact: Austin Ph: (888) 401-6367 x703

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

2016 Barko Tree Chipper Item ID: 16688

Contact: AUSTIN Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 931-797-8029

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703

Cat C15 Generator Set

with 1700Item hours,ID: in 99858 very good

off onto a conveyor. This is a very

Ford Altec Bucket Truck Item ID: 347

Contact: SAM Email: Sam@lumbermensco.com Phone: 888-401-6367 ‘05 Gehl CTL 70EXT 702

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

chain conveyer, 8 way splitter, on

20,000lb goose neck trailer. Item ID

Paccair 13916. Austin x703 Winch

ID: 86536 Best ValueItem Portable Log Splitter

Phone: 888-401-6367 EXT 702 ‘Cone’ quality chips with patented

-Contact: Small manufacturer AUSTIN in PA has Email: Austin@lumbermensco.com made the888-401-6367 best valued logEXT splitter. Phone: 703 931-797-8029 Handles logs up to 32”. Uses

vans and produce 6 - 8 loads per

but electronic option is available.

condition. Easily produces high Contact: SAM Email: Sam@lumbermensco.com

drum design. Can easily load 42’ day. Item ID 13882. Austin x703

EDGERS & GANGS

Brewco Saws - Two Brewco Saws

in excellent condition. Runs great.

Pup Sam Trailers Item ID 13644. x702 Item 53363 FIREWOODID: PROCESSORS

2010 Shop Built Wood Processor Contact: AUSTIN Email: Austin@lumbermensco.com -Phone: It has a 353 Detroit diesel, 888-401-6367 EXT40703 931-797-8029 inch insert tooth circle saw, 30 foot  Issue 364 392

Skidder

13HP Honda motor. Manual start Has Log Lift. Uses 4-way wedge

adjustable to single two way. Great

Value! PA. Item ID 12062. Sam x702 Firewood Processor - This is a

homemade processorTrailer with a 10’ Transcraft Itema ID: 45261 grapple, log deck. Has hydraulic

chain and kicker that all runs off Contact: AUSTIN Email: Austin@lumbermensco.com of a 4 cylinder Mercedes power Phone: 888-401-6367 EXT 703 931-797-8029 unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

'09built Mack TruckItem & Trailer well processor. ID 13820. Item ID: 74618 Sam x702 Firewood Contact:Processor AUSTIN - This is Email: Austin@lumbermensco.com aPhone: Chomper Model 16 PDA 888-401-6367 EXT 703 931-797-8029 automatice firewood processor with John Deere power unit with

low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”. One owner and comes with all

manuals and receipts. Purchased new for $32,500. Item ID 13865.

Morbark PS8 Post Peeler Sam x702 Item ID: 63148

LOGGING EQUIPMENT Contact: SAM BANDIT Email: Sam@lumbermensco.com

2014 Morbark M20R

‘95 JohnTrack Deere C6 Forestry Chipper ID: 46375 TreeItem Farmer

Item ID:AUSTIN 13920 Contact: Email: Austin@lumbermensco.com Contact: Austin EXT 703 Phone: 888-401-6367 Ph: (888) 931-797-8029 401-6367 x703

capacity!. Item ID 13421. Sam x702

BARKO

1994 Barko 160B - Electric

knuckleboom, 30' boom, 75hp

motor, Rotobec continuous Dymax Skidsteer Tree Cutter Itemoriginal ID: 96694 grapple, 5,000 hours.

(excellent Contact:condition.). AUSTIN Item ID Email: Austin@lumbermensco.com 13238. Chris x700 Phone: 888-401-6367 EXT 703 931-797-8029 1995 Barko 775 B Feller Buncher - Pumps recently redone. 400 hrs

on injection pump. always started

good. in good working order. 22in kohing head. head works great. Item ID 13185. Sam x702

1999 Barko 160D - new engine with

approximately hours.Truck Hour Ford F650 1500 Service Item ID: 92089 meter dont work. The last 2 owners

Phone: 888-401-6367 702 1999 Bandit 1900 TrackedEXT Disc

Contact: AUSTIN have only used it to load trucks or Email: Austin@lumbermensco.com as a backup as needed. Has CTR Phone: 888-401-6367 EXTa703 OR 931-797-8029 delimber, grapple has been rebuilt.

50% or better. 475 hp Cummins

Item ID 13694. Sam x702

Chipper - Cat Under Carriage at Diesel. 7500 Hours. One owner.

Well maintained. Item ID 13294. Sam x702

2004 Bandit Beast Model 4680 -

1999 International 9100 3412 Caterpillar Diesel engine

Item ID: 33563 with 850 HP. 5300 hrs. Mill in Contact: AUSTIN good condition. Just finished 10 Email: Austin@lumbermensco.com Phone: 888-401-6367 EXT 703 Acre clearing job, ready to work! 931-797-8029 Remote control. Big production

 List  seLL  exchange  buy  save

Boom cylinders have minor leaks. 94 Barko 275 - Excellent value

with low at hours at 3,500. 5.9

CUMMINS continuous grapple.

Runs Great!. Item ID 13740. Sam

'07 Morbark 3800

x702Horizontal Grinder Item BELL ID: 84439

1990 Bell Super T - This Bell has Contact: AUSTIN aEmail: brandAustin@lumbermensco.com new Duetz engine. Lever Phone: 888-401-6367 EXT 703 931-797-8029 control, 33” bar, pump and tranny ❘

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 37


“Precision Under Pressure”

A D D I R EC TO RY

Phone 315.284.4126 Fax 315.849.2045 Website www.empirehyd.com Email info@empirehyd.com

Anson..................................................4................................800-663-7723 B & B Mfg..........................................7................................800-654-5320 B. H. Payne........................................14..............................404-761-8711 Baker...................................................8, 9............................800-548-6914

Bell's Machining...............................9................................888-995-1965 ‘93 Barko 180B

‘16 Halverson H140 Blockbuster Inc.................................10. .............................888-775-4883 Item ID: 14077 Contact: Austin Buck Equipment(DEMO) (AIM)....................12........................... ...800-803-3365 Skidsteer Ph: (888) 401-6367 x703 ItemKing...........................................2........................... ID: JW-909632 Cord 888-219-WOOD Contact: J Williams Corley Mfg.........................................3................................423-698-0284 Ph: (888) 401-6367 x701 CW Mills............................................5, 8, 39.....................800-743-3491 F&R Mfg.............................................12..............................800-355-1250 Great Lakes Mfg...............................10..............................877-248-5677 GoFast Manufacturing....................9................................800-854-7439 Hurst Boiler.......................................11..............................877-774-8778

‘95 John Deere C6 Kilgore Saw........................................12........................... ...888-857-5153 Lignomat............................................14..Tree ............................800-227-2105 Farmer

Item ID: 13920 L-M Equipment Co. Ltd...................1................................800-455-8807 Austin ‘13 KMC 2500 Track Lumbermens......................................14,Contact: 37.......................888-401-6367 Ph: (888) 401-6367 x703 SkidderSaw...............................14..............................800-582-0470 Menominee Item Detectors, ID: 14078 Inc........................7................................541-345-7454 Metal Contact: Austin capacity!. Item ID...231-924-5953 13421. Sam x702 Midwest Sharpening ......................13........................... Ph: (888) 401-6367 x703 BARKO Multitek North America. LLC........11..............................800-243-5438

13428 Victory Ln. // PO Box 124 Adams Center, NY 13606

,-soo-211-94&8

1994 Barko 160B .-..800-211-9468 Electric Pantron Automation, Inc. ..............38...........................

off onto a conveyor. This is a very

knuckleboom, 30' boom, 75hp

Piper’s Saw Shop..............................8................................800-845-6075

well built processor. Item ID 13820.

motor, Rotobec continuous

Prolenc................................................40..............................877-563-8899

Sam x702

grapple, 5,000 original hours.

Rawlings Wood Hogs......................6................................866-762-9327

Firewood Processor - This is

‘05 Gehl CTL 70

‘83 John Deere 4850

Item ID: 14073 Contact: Austin Ph: (888) 401-6367 x703 with 1700 hours, in very good

condition. Easily produces high

quality chips with patented ‘Cone’ drum design. Can easily load 42’

Item ID: JW-986495 Contact: J Williams Ph: (888) 401-6367 x701

20,000lb goose neck trailer. Item ID 13916. Austin x703

Item ID 13644. Sam x702

FIREWOOD PROCESSORS

2010 Shop Built Wood Processor - It has a 353 Detroit diesel, 40

inch insert tooth circle saw, 30 foot  Issue 364 392

Woodlandia.......................................10. ............................877-508-8777 with John Deere power unit with - .Pumps recently redone. 400 hrs low hours. Control panel includes tach, oil pressure, water temp and amp gauges. Cuts logs up to 16”.

on injection pump. always started

good. in good working order. 22in

NOVEMBER 2020

kohing head. head works great.

If you need to Change your Address or Item ID 13185. Sam x702 Add Your Name to our mailing list, then manuals and receipts. Purchased Barkoand 160D -mail new engine please complete this1999 form to: with One owner and comes with all

new for $32,500. Item ID 13865.

approximately 1500 hours. Hour

- Small manufacturer in PA has

Lumbermens™ Magazine meter dont work. The last 2 owners Sam x702 P.O. Box 1916 LOGGING EQUIPMENT have38402 only used it to load trucks or Columbia, TN

Handles logs up to 32”. Uses

❑ Bandit Please ❑ Disc Please Change Please Remove 1999 1900Add Tracked delimber,❑ grapple has been rebuilt.

Best Value Portable Log Splitter made the best valued log splitter. 13HP Honda motor. Manual start

• Through-beam range u1p to 230 feet vans and produce 6 - 8 loads per but electronic option is available. • Waterproof - IP67 rated day. Item ID 13882. Austin x703 Has Log Lift. Uses 4-way wedge • Not affected by vibration EDGERS & GANGS adjustable to single two way. Great • 60k LUX Immunity to sunlight Brewco Saws - Two Brewco Saws Value! PA. Item ID 12062. Sam x702 in excellent condition. Runs great.

Select Sawmill Co.............................13. .............................866-724-7600 1995 Barko 775 B Feller Buncher automatice firewood processor

PLEASE PRINT

chain conveyer, 8 way splitter, on

(excellent condition.). Item ID

Electric......................................13........................... 13238. Chris x700...800-248-4479 aRow Chomper Model 16 PDA

Firewood Processor - This is a

homemade processor with a 10’

log deck. Has a hydraulic grapple, chain and kicker that all runs off of a 4 cylinder Mercedes power

unit. Has a 4’ chain saw that kicks

Lumbermens™  since 1986

BANDIT

as a backup as needed. Has a CTR

*Company name and address process have your change. Chipper - Cat Under Carriage at required Boomto cylinders minor leaks. Company Name*:_ 50% or better. 475________________________________________________________ hp Cummins Item ID 13694. Sam x702

Diesel. 7500 Hours. One owner. 94 Barko 275 - Excellent value Individual Name:__________________________________________________________ Well maintained. Item ID 13294. with low at hours at 3,500. 5.9 Address:_________________________________________________________________ Sam x702

CUMMINS continuous grapple.

_______________________________________________________________________

2004 Bandit Beast Model 4680 -

Runs Great!. Item ID 13740. Sam

City:____________________________________________________________________

3412 Caterpillar Diesel engine

x702

State:___________________________________________________________________ with 850 HP. 5300 hrs. Mill in BELL Zip:__condition. ___________________________________________________________________ good Just finished 10 1990 Bell Super T - This Bell has

Acre clearing job, ready to work! a brand new Duetz engine. Lever Phone:__________________________________________________________________ Remote control. Big production control, 33” bar, pump and tranny Email:___________________________________________________________________

 List  seLL  exchange  buy  save

 LumbermensCO.com


** CALENDAR**

NY STATE WOODSMEN'S FIELD DAYS Fri, 18 August - Sun, 20 August Boonville, New York www.starwebhosting.net/woodsmen/

SOUTHWEST FOREST PRODUCTS EXPO Fri, 25 August - Sat, 26 August

The Tree that Started it All!

Hot Springs, Arkansas www.arkloggers.com

72ND ANNUAL GREAT LAKES LOGGING & HEAVY EQUIPMENT EXPO Thurs, 7 Sept - Sat, 9 Sept

Since 1986, Lumbermens has published a monthly circular reaching sawmills, loggers, pallet makers, recyclers and industrial woodworking plants worldwide.

Escanaba, Michigan

MID-ATLANTIC LOGGING & BIOMASS Fri, 15 Sept - Sat, 16 Sept

PUBLISHER

Woods Publishing

ADVERTISING SALES

Morris Woods (888) 401-6367 ext. 704 morris@lumbermens.co

MID-ATLANTIC

LOGGING & BIOMASS EXPO

KENTUCKY WOOD EXPO Fri, 15 Sept - Sat, 16 Sept

MARKETING DIRECTOR

Lexington, Kentucky http://www.kfia.org/ KentuckyWoodExpo.aspx

John Williams (888) 401-6367 ext. 701 j@lumbermens.co

THE PAUL BUNYAN SHOW Fri, 6 Oct - Sun, 8 Oct

DESIGN DIRECTOR Donna Heninger

Cambridge, Ohio www.ohioforest.org

EQUIPMENT REPS

Sam Wall (888) 401-6367 ext. 702 sam@lumbermens.co Austin Woods (888) 401-6367 ext. 703 austin@lumbermens.co

MAILING ADDRESS

Selma, North Carolina www.midatlantic-logging-biomass­ expo.com/

** INFO LINK**

FOR CLASSIFIEDS Call 888.401.MENS See pictures, prices, and Location of all equipment at www.LumberMB\ISmagazine.com BANDMILLS & HEADSAWS Danckaert Band Resaw - Roughly 10 hours on this machine since it has been rebuilt, it has a 24foot in feed deck 20 foot out feed deck with 44 inch wheels, and all the bells and whistles, its a production machine, with air strain conveyers that go up and down, with airbags, it includes two sets of Mcdonough pressure guides. Top Casting wheel is supported on both sides. This is an extremely accurate machine in ve1y good condition, Cuts 130 feet a minute also has CLT presses. Item ID 13876. Austin x703 S & W 125 Band Mill with Caterpillar generator - Low hours on the mill, electronic computer Set works,1 1/2" or 2" band, 22ft. track Cat 3406 140KW Genset, 12,400 hours ready to run. Item ID 13434. Sam x702

CARRIAGES & DRIVES

2010 Cardinal HD Carriage Carriages (Sawmill) - Cardinal Carriage line it includes carriage

B & B Mfg. ............................... 18

M&F Gauge ............................. 28

B. H. Payne .............................. 16

Meadows Mill, Inc. ................ 33

Baker ...................................... 5, 7

Menominee Saw ..................... 29

sawyers cab, computer controls,

Bell's Machining ..................... 27

Metal Detector's Inc. .............. 30

cabinet with electronic drives for

Brute Force Mfg. ..................... 31

Midwest Sharpening.............. 26

carriage knees, husk including

Send address changes to: Lumberman's Exchange P.O. Box 1916 Columbia, TN 38402

Buck Equipment (AIM) ........ 36

Morbark ..................................... 9

Corley Mfg .............................. 32

Multitek ................................... 12

CRD Metalworks .................... 25

Piper's Saw Shop.................... 13

The Lumberman's Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers, the Lumberman's Exchange, its principles and associates, are not held liable for errors or omissions. Reproduction, in whole or part, is prohibited with­ out written consent. ©2017 Woods Publishing

CW Mill-ArmorHog .............. 17

Rotochopper............................ 40

CW Mill-Hogzilla ................... 15

Row Electric ............................ 20

Dyna Products ........................ 35

Sawmill Exchange .................. 11

Empire Hydraulics ................... 8

Select Sawmill ......................... 19

Great Lakes Mfg. .................... 34

Smith Sawmill ........................... 4

Hahn Machinery ...................... 3

The Paul Bunyan Show ......... 39

Hurst Boiler ............................. 14

Thomas Industrial Controls..... 10

Iron Bull ................................... 21

Union Grove Saw & Knife.. 2, 37

Kilgore Saw ............................. 22

Universal Refiner ................... 23

Lignomat ................................. 24

WoodMizer ................................ l

P.O. Box 1916 Columbia, TN 38402-1916 (888) 401-6367

AD SUBMISSIONS

May be sent to­ morris@lumbermens.co

POSTMASTER

- USED FORESTRY EQUIPMENT FOR SALE SALE ❘

 SELL YOUR EQUIPMENT TODAY TODAY l§

 24/7 SUPPORT 0 SUPPORT

with onboard log turners, carriage drive, hyd pac for carriage,

48" bottom saw and 36" top saw

STACKING RAC

www.BakerProducts.net 800.S48.6914 I S73.663.7711 ❘ L!  (888) 401-MENS 401-MENS

NO. 39


ut

e ent

ore

Collar

Spring

Collar

Collar

Nut

Nut

Collar

Collar

Spring

Adjusting Bolts Link

Adjusting Bolts

Pin

Pressure Plate Wear Pin Sleeve

Bearing

Plate

Pressure Plate

Pressure Plate

Pressure Plate

Wear Sleeve Bearing

Housing

Wear Sleeve

Wear Sleeve

Pressure Plate

Housing

Wear Sleeve

Housing

Housing

Spring

Spring

Bearing

Pin

Pin

Pressure Plate

Adjusting Bolts Spring

Pin

Link

Bearing

Bearing

Wear HousingSpring Sleeve Housing Link Spring Bearing Adjusting Spring Bolts Bearing Adjusting Bearing Adjusting Bolts Pressure Bolts

Link

Spring Bearing

Housing

Bearing

Adjusting Bolts

Link

Bearing

Wear Sleeve

Bearing Pin

Link

Wear Sleeve

Wear Sleeve Bearing

Wear Sleeve

Pin

Wear Sleeve

Collar

Core

Bearing

Core

Nut

Core Wear Spring Sleeve Pressure Core Core Adjustment Link Spring Spring Pressure Adjustment

Wear Sleeve

Nut

Nut

Pressure Adjustment

Pressure Adjustment

Spring

Pressure Adjustment

Core

Wear Sleeve

LUMBERMENS™ MAGAZINE 1116 West 7th Street, Suite 297 Columbia, Tennessee 38401 PRSRT STD. U.S. Postage PAID Permit No. 212 Pulaski, TN


Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.