Assembly instructions
MAIOR PLUS BALUSTRADE
THE VIDEO OF THE ASSEMBLY (Faraone YouTube channel)How to mount the MAIOR PLUS system
AMAIOR PLUS with ground fastening featuring external glass, can be used outdoor and indoor.
1 3
Drill the ø10 mm holes in the floor according to the instructions. Position the posts every 1,500 mm maximum. Resistance to thrust up to 300 kg/m, position the posts every 1,000 mm maximum.
2
HOLE A HOLE B ART
MR-01-V1B ART. MR-13/AC/11 MR-01/V5
Insert the relative dowels in the holes.
Position the posts vertically by intervening on the adjusters and aiding with a level.
How to mount the MAIOR PLUS system
4
5
MR-04
MR-08
Loose art. MR-08, insert the lower profile MR04 complete with lower gasket.
Delrin dowel (not supplied)
Insert the glass in the lower profile, lay it on the delrin dowels (not supplied).
6 7
Insert the glass in the upper profile, close and finally tighten the MR-08 clamps.
Proceed with the fixing of the handrail and the relative caps.
How to mount the MAIOR PLUS system
BMAIOR PLUS with fascia mounting featuring full-height external glass, can be used outdoor.
1 2
L= resistance to thrust up to 200 Kg/m
INTERNAL
min. 50mm L
INTERNAL
L
Drill the holes in the floor according to the instructions. Upper hole ø16 mm, lower hole ø10 mm.
Position the posts every 1,500 mm maximum. Resistance to thrust up to 300 kg/m, position the posts every 1,000 mm maximum.
POSIZIONARE I PIANTONI PRE-ASSEMBLATI IN CORRISPONDENZA DEI FORI, FISSARLI AL SOLAIO CON LE VITI APPOSITE min. 50mm
HOLE A HOLE B
ART. MR-01/V3 MR-01/V4
ART MR-01/V1
POSIZIONARE I PIANTONI PRE-ASSEMBLATI IN CORRISPONDENZA DEI FORI, FISSARLI AL SOLAIO CON LE VITI APPOSITE CORRISPONDENZA
3
INTERNAL
4
INTERNAL
EXTERNAL EXTERNAL EXTERNAL EXTERNAL
Insert the relative dowels in the holes.
FLOOR
SCREED
CONCRETE
Art. MR-01/V3 MR-01/V4
Art. MR-01/V1
Position the pre-assembled posts in correspondence with the holes, fix them to the floor with the appropriate screws.
Position the posts vertically by intervening on the adjusters and aiding with a level.
Loose art. MR-08, insert the lower profile MR04 complete with lower gasket.
Delrin dowel (not supplied)
Insert the glass in the lower profile, lay it on the delrin dowels (not supplied).
Insert the glass in the upper profile, close and finally tighten the MR-08 clamps.
Proceed with the fixing of the handrail and the relative caps.
1
2 3
How to mount the MAIOR PLUS system
CMAIOR PLUS with fascia mounting featuring internal glass, ideal for indoor and outdoor elevated walkways
EFFETTUARE I FORI NEL SOLAIO SECONDO LE ISTRUZIONI FORO SUPERIORE Ø16mm FORO INFERIORE Ø10mm
L= resistance to thrust up to 200 Kg/m min. 50mm min. 50mm
L= RESISTENZA ALLA SPINTA 200Kg/m POSIZIONARE
Drill the ø10 mm holes in the floor according to the instructions.
I PIANTONI OGNI 1500mm MASSIMO
RESISTENZA ALLA SPINTA 300Kg/m POSIZIONARE
I PIANTONI OGNI 1000mm MASSIMO
Position the posts every 1,500 mm maximum. Resistance to thrust up to 300 kg/m, position the posts every 1,000 mm maximum.
HOLE A HOLE B ART.
MR-01-V3 MR-01-V4
ART. MR-01/V1
Insert the relative dowels in the holes.
FLOOR
SCREED
CONCRETE
Art. MR-01/V3 MR-01/V4
Art. MR-01/V1
Position the pre-assembled posts in correspondence with the holes, fix them to the floor with the appropriate screws.
How
Closure