EXIT Technical informations
40
10
- the most wear resistant grade among 8000 grades - submicron substrate without cubical carbides, low content of cobalt - nanostructural coating applied by PVD method - suitable for cutting conditions with high thermal stress - general-purpose grade - small up to medium chip cross section - high cutting speed - steady cutting conditions
20
30
40
10
- submicron substrate type H - nanostructural coating applied by PVD method - combines good wear resistance and good operational reliability - general-purpose grade - medium cutting speed - for less favourable cutting conditions
20
30
40
9230
10
- the most wear resistant grade among 92XX grades - functional gradient substrate with low content of cobalt - thick MTCVD coating with the main layer of Al2O3 - special adjustment after coating - finishing up to roughing - machining of materials group P and K, conditionally for M - higher cutting speeds - continuous and conditionally also moderate interrupted cut
30
40
- the most versatile grade among grades of new generation 9000 - functional gradient substrate - modern medium-thick special MT-CVD coating - special adjustment after coating - for finishing up to roughing - machining of materials groups P, M, K and conditionally for group S - medium and higher cutting speeds - continuous and interrupted cut
main area Continuous cut High speed Stable condition
20
NEW CHIPBREAKERS FOR TURNING OF CARBON STEEL, STAINLESS STEEL AND SUPER ALLOYS
P M K N S H
30
9210
P M K N S H
20
P M K N S H
10
8030
P M K N S H
8016
other application
conditional application
Continuous cut High speed Stable condition NOVÝ MATERIÁL
NOVÝ MATERIÁL
Wear resistance
Wear resistance
Toughness
Toughness
Interupted cut / High feed / Unstable conditions
Interupted cut / High feed / Unstable conditions
EXAMPLE automat crank turning 16MnCr5 DNMG110408-P25 - competitor DNMG110408E-FM; 9230 - Pramet
No. of machined pieces [pcs]
Pramet
vc
210
210
m.min-1
Feed
f
0,25
0,25
mm.rev
Depth of cut
ap
1,0
1,0
mm
No. of machined pieces
-
1500
3500
pcs
-1
N o. o
+13
2500 2000 1500
1500 pcs
1000 500 0
Competitor (P25)
Pramet
Pramet Tools, s.r.o., Unicovska 2, 787 53 Sumperk, CZECH REPUBLIC Tel./phone: +420 583 381 111, Fax: +420 583 215 401, E-mail: pramet.info.cz@pramet.com BRAZIL • Pramet Ind. e Com. de Ferramentas Ltda., Sorocaba / SP, Tel./Fax: +55 15 3325-6162, E-mail: pramet.info.br@pramet.com GERMANY • Pramet GmbH, Erlangen, Telefon: + 49 9131 / 93 37 40, E-mail: pramet.info.de@pramet.com HUNGARY • Pramet Kft., Budapest, Tel.: + 36-1-382-90-82, E-mail: pramet.info.hu@pramet.com INDIA • Pramet Tools India Pvt Ltd, Gurgaon, Phone: + 91 124 4703825, E-mail: pramet.info.in@pramet.com ITALY • Pramet SRL, Lainate (MI), Telefono: + 39 02 / 93 79 94 82, E-mail: pramet.info.it@pramet.com POLAND • Pramet Sp. z o.o., Sosnowiec, Telefon: + 48 32 / 78 15 890, E-mail: pramet.info.pl@pramet.com RUSSIA • OOO «Прамет», Москва, РФ, Тел.: +7 495 739 57 23, 739 57 22, E-mail: pramet.info.ru@pramet.com SLOVAKIA • Pramet Slovakia, Žilina, Telefon: + 421 41 / 764 54 60, E-mail: pramet.info.sk@pramet.com
www.pramet.com
ces
f pie
3000
Cutting speed
Cutting conditions
3500 pcs
3500
Competitor
Machine: Součástka: Operation: Workpiece: Inserts:
3%
FF FM FF FM FF FM FF FM FF FM FF FM FF, FM FF FM FF FM FF FM FF FM
LOW CUTTING FORCES CLOSE TOLERANCES EXCELLENT SURFACE QUALITY
www.pramet.com
P M S