2012/2013
1
Photo: Gabe LHeureux
A
politically correct term for "Snowblading" is actually, “Ski boarding.” I know because in the late 90’s, I bunked with a bunch of friends from Squaw who were sponsored Ski boarders at the US Freeskiing Open in Vail. Then, the twin tip along side its rival, the Ski board, was most commonly found in the back of any ski catalog. The section was called, “Do people really want these things?” The fact was, manufacturer's told us twin tips were a joke, race skis rocked and unless the skiers at the time risked it all to prove a point, it could have been just as easily forgotten as we have the "Snowblade."
Enter the rider owned revolution. We assembled as a group of friends, competitive peers and powder day lift line buddies. We turned our sponsors into our factories. We embarked down a path to create skis that enabled our passion for skiing to influence others. We’re proud to have suffered and survived the pains of jolting this old man’s industry back into a kid’s sport again. Ten years in the making. Thanks for your support. -Matt Sterbenz
4FRNT was born during this era. The year was 2002, when thoughts of skiing backwards were “unconventional” and team riders were glorified ski models. We wanted respect. We demanded some authenticity and we deserved unsolicited input to the skis we envisioned to make our contribution to ski history possible. 3
Photo: Gabe LHeureux
A
politically correct term for "Snowblading" is actually, “Ski boarding.” I know because in the late 90’s, I bunked with a bunch of friends from Squaw who were sponsored Ski boarders at the US Freeskiing Open in Vail. Then, the twin tip along side its rival, the Ski board, was most commonly found in the back of any ski catalog. The section was called, “Do people really want these things?” The fact was, manufacturer's told us twin tips were a joke, race skis rocked and unless the skiers at the time risked it all to prove a point, it could have been just as easily forgotten as we have the "Snowblade."
Enter the rider owned revolution. We assembled as a group of friends, competitive peers and powder day lift line buddies. We turned our sponsors into our factories. We embarked down a path to create skis that enabled our passion for skiing to influence others. We’re proud to have suffered and survived the pains of jolting this old man’s industry back into a kid’s sport again. Ten years in the making. Thanks for your support. -Matt Sterbenz
4FRNT was born during this era. The year was 2002, when thoughts of skiing backwards were “unconventional” and team riders were glorified ski models. We wanted respect. We demanded some authenticity and we deserved unsolicited input to the skis we envisioned to make our contribution to ski history possible. 3
*New
*New
*New
*New
Renegade
HOJI
YLE
CRJ
SIGNATURE SERIES
CODY
Turbo
Aretha
Madonna
IDENTITY SERIES
Switchblade
Click!
PARK SERIES
Blondie
YLE Coyote
Grom
FUTURE SERIES 5
*New
*New
*New
*New
Renegade
HOJI
YLE
CRJ
SIGNATURE SERIES
CODY
Turbo
Aretha
Madonna
IDENTITY SERIES
Switchblade
Click!
PARK SERIES
Blondie
YLE Coyote
Grom
FUTURE SERIES 5
for 4FRNT,
...it was also the culmination of six years of passion, drive and design. From day one 4FRNT’s mission has been to make skis designed by our riders for our riders. Our version of a skiers co-op. The first pair of skis we pressed in a Tahoe garage had it, and the countless rounds of prototypes we ordered from our manufacturers in the years that followed had it. But when the press arrived at our headquarters in Salt Lake, we bolted it to the ground. We knew that the future of our company, and the future of the sport, was going to come out of the layers of wood, fiberglass and metal that came out of that press. We call it, the White Room. Every ski in our line-up has come from the technology we have developed through prototyping and testing in the White Room. Having an in-house prototyping facility of this caliber at the base of the Wasatch Mountains allows us unlimited potential to create new shapes and designs that can be instantly tested by our athletes in real world conditions. Whether it’s skiing big lines in Little Cottonwood or hitting urban rails at the Rail Garden, our riders put these skis through their paces and generate feedback we could never get from just flex testing a ski with a robot.
When we walked into the warehouse in Vancouver, BC to claim a ski press from an out of business snowboarding company, it wasn’t just the start of a whole new chapter Photo: Phil Herbert Location: The White Room
As we have grown the White Room, it has also become the home to the Renegade. A ski that we produce in-house with a team of ski techs, engineers and woodworkers who spend all summer at our headquarters shoulder-to-shoulder with Cody Barnhill and Eric Hjorleifson. Turning the White Room into a production environment has allowed us to create a level of efficiency and quality that is unmatched and it trickles down into our new ski designs. The HOJI and the CODY are direct descendants of those long, hot summers spent with the Renegade. 7
for 4FRNT,
...it was also the culmination of six years of passion, drive and design. From day one 4FRNT’s mission has been to make skis designed by our riders for our riders. Our version of a skiers co-op. The first pair of skis we pressed in a Tahoe garage had it, and the countless rounds of prototypes we ordered from our manufacturers in the years that followed had it. But when the press arrived at our headquarters in Salt Lake, we bolted it to the ground. We knew that the future of our company, and the future of the sport, was going to come out of the layers of wood, fiberglass and metal that came out of that press. We call it, the White Room. Every ski in our line-up has come from the technology we have developed through prototyping and testing in the White Room. Having an in-house prototyping facility of this caliber at the base of the Wasatch Mountains allows us unlimited potential to create new shapes and designs that can be instantly tested by our athletes in real world conditions. Whether it’s skiing big lines in Little Cottonwood or hitting urban rails at the Rail Garden, our riders put these skis through their paces and generate feedback we could never get from just flex testing a ski with a robot.
When we walked into the warehouse in Vancouver, BC to claim a ski press from an out of business snowboarding company, it wasn’t just the start of a whole new chapter Photo: Phil Herbert Location: The White Room
As we have grown the White Room, it has also become the home to the Renegade. A ski that we produce in-house with a team of ski techs, engineers and woodworkers who spend all summer at our headquarters shoulder-to-shoulder with Cody Barnhill and Eric Hjorleifson. Turning the White Room into a production environment has allowed us to create a level of efficiency and quality that is unmatched and it trickles down into our new ski designs. The HOJI and the CODY are direct descendants of those long, hot summers spent with the Renegade. 7
Photo: Cody Barnhill Location: Alta, Utah
Signature Series:
The Signature Series is the embodiment of our philosophy of “Rider Driven” design, from the first pair of MSP’s, to the brand-new HOJI and CODY models. We have always been about making the skis we want to ski ourselves. We don’t need focus g roups or marketing teams to tell us what skis to make. We have our Team. We start with an idea, or a sketch on a napkin, from our riders about what ski they would make if they could have the ski they’ve always dreamed of. From that initial idea, the riders work with Cody and the rest of the White Room crew to draft up technical designs and the first round of prototypes. What happens over the next few weeks and months, and countless hours of trial and error, is that we pull a ski off our press that is exactly what our riders wanted, with no compromises made on shape, f lex or materials. The skis that ultimately end up in your local shop are these same skis. Over the course of the last decade, our Signature Series skis have not only transformed the way our riders ski, or how we look at the mountain, they have fundamentally changed the sport itself. The Signature Series models are the skis of choice for anyone demanding the very best in technology and construction, or for someone looking to take their riding to the next level. Whether you’re looking to step into big mountain lines in AK, slash a tree line on the ice coast, or try your hand at ski mountaineering in Chamonix, the Signature Series should be your first stop. Photo: Pieter Leeflang Location: The White Room
Photo: Phil Herbert Location: The White Room 9
Photo: Cody Barnhill Location: Alta, Utah
Signature Series:
The Signature Series is the embodiment of our philosophy of “Rider Driven” design, from the first pair of MSP’s, to the brand-new HOJI and CODY models. We have always been about making the skis we want to ski ourselves. We don’t need focus g roups or marketing teams to tell us what skis to make. We have our Team. We start with an idea, or a sketch on a napkin, from our riders about what ski they would make if they could have the ski they’ve always dreamed of. From that initial idea, the riders work with Cody and the rest of the White Room crew to draft up technical designs and the first round of prototypes. What happens over the next few weeks and months, and countless hours of trial and error, is that we pull a ski off our press that is exactly what our riders wanted, with no compromises made on shape, f lex or materials. The skis that ultimately end up in your local shop are these same skis. Over the course of the last decade, our Signature Series skis have not only transformed the way our riders ski, or how we look at the mountain, they have fundamentally changed the sport itself. The Signature Series models are the skis of choice for anyone demanding the very best in technology and construction, or for someone looking to take their riding to the next level. Whether you’re looking to step into big mountain lines in AK, slash a tree line on the ice coast, or try your hand at ski mountaineering in Chamonix, the Signature Series should be your first stop. Photo: Pieter Leeflang Location: The White Room
Photo: Phil Herbert Location: The White Room 9
The beauty of chemistry is you take a bunch of simple elements, and depending on the ratios and the process, you can create amazing things. That’s what we do at 4FRNT. Simple, quality components, and proven designs that are combined in ways to make revolutionary skis.
4FRNT TECHNOLOGY
Reflect Technology was dreamed up by the mind of Eric Hjorleifson as a way to make rocker and side-cut work together. In the past, full rocker profiles would have a negative impact on the ability of the ski to edge consistently, and would cause the tips to hook and the tails to wash out while the ski was on edge. With Reflect Tech, the rocker radius and the side-cut radius are matched, to allow the ski to edge smoothly, and create predictable carving in all conditions. It virtually eliminates tip hook, as the ski will engage smoothly along the length of the ski, while still giving you the float and pivotability of a fully rockered ski. You can find Reflect Tech in the Renegade and HOJI.
Our women’s skis have shapes similar to our men’s line, but they are set apart with our women’s specific Contour Core construction. While men drive the ski from their chest, women tend to ski from their hips, which generates forces down through their heels. With our women’s cores, we’ve moved the weight of the core rearwards (5cm) to accommodate this more centered skiing style. This lets women drive the true center of the core weight instead of constantly fighting from behind, while still being centered over the side cut. You can find Contour Core in the Aretha, Madonna and Blondie.
SKI CATEGORY
SHAPES
CAMBER
When you’re looking for a one-ski-quiver, look no further than our all-mountain skis.
The neutral sidecut length at the tip and tails' widest dimension.
An upturned radius in the tips and tails lets the ski float through powder and off-trail conditions.
Take the park into the backcountry with these skis designed for maximum stompage.
The two contact points of the ski are at the tips and tails.
The camber of the ski is flattened in the tips allowing for the tips to splay outwards.
These skis take you away to that special place. POW.
The tail of the ski is also upturned to allow for switch skiing and landings.
A traditional ski shape that gives the ski maximum performance in groomed conditions.
Spin, flip and slide your way to glory with our skis designed for the park and pipe.
Skis with the same dimensions in the tip and the tail, along with a near centered mounting point.
A full radius along the length of the ski gives the ski maximum float, and nimble turning.
These skis will get you down the steepest, tightest and most exposed lines out there.
A directional shape gives the ski a more consistent feel.
When the deep gets deeper, you want a ski with the float you need.
DIMENSIONS
GEOMETRY
Determines the length of the ski in centimeters along its base from end to end.
This measures the amount of sidecut the ski has in radial meters.
This measures the width of the tip of the ski at its widest point
The Effective Edge is the length of running surface along the base.
This measures the width at midsole of the skis' narrowest point.
CONSTRUCTION The wood core is inserted into a fiberglass sleeve for a lightweight, durable construction. Layers of wood and fiberglass are sandwiched together to create the highest performance ski. Semi-cap partially wraps the topsheet around the sidewall for additional durability. Inherited construction technique from central Norway, this sidewall-less design provdides superb energy transmission to the edge.
This measures the width of the tail at its widest point. Weight shows how heavy a single ski weighs in kilometers and pounds.
11
The beauty of chemistry is you take a bunch of simple elements, and depending on the ratios and the process, you can create amazing things. That’s what we do at 4FRNT. Simple, quality components, and proven designs that are combined in ways to make revolutionary skis.
4FRNT TECHNOLOGY
Reflect Technology was dreamed up by the mind of Eric Hjorleifson as a way to make rocker and side-cut work together. In the past, full rocker profiles would have a negative impact on the ability of the ski to edge consistently, and would cause the tips to hook and the tails to wash out while the ski was on edge. With Reflect Tech, the rocker radius and the side-cut radius are matched, to allow the ski to edge smoothly, and create predictable carving in all conditions. It virtually eliminates tip hook, as the ski will engage smoothly along the length of the ski, while still giving you the float and pivotability of a fully rockered ski. You can find Reflect Tech in the Renegade and HOJI.
Our women’s skis have shapes similar to our men’s line, but they are set apart with our women’s specific Contour Core construction. While men drive the ski from their chest, women tend to ski from their hips, which generates forces down through their heels. With our women’s cores, we’ve moved the weight of the core rearwards (5cm) to accommodate this more centered skiing style. This lets women drive the true center of the core weight instead of constantly fighting from behind, while still being centered over the side cut. You can find Contour Core in the Aretha, Madonna and Blondie.
SKI CATEGORY
SHAPES
CAMBER
When you’re looking for a one-ski-quiver, look no further than our all-mountain skis.
The neutral sidecut length at the tip and tails' widest dimension.
An upturned radius in the tips and tails lets the ski float through powder and off-trail conditions.
Take the park into the backcountry with these skis designed for maximum stompage.
The two contact points of the ski are at the tips and tails.
The camber of the ski is flattened in the tips allowing for the tips to splay outwards.
These skis take you away to that special place. POW.
The tail of the ski is also upturned to allow for switch skiing and landings.
A traditional ski shape that gives the ski maximum performance in groomed conditions.
Spin, flip and slide your way to glory with our skis designed for the park and pipe.
Skis with the same dimensions in the tip and the tail, along with a near centered mounting point.
A full radius along the length of the ski gives the ski maximum float, and nimble turning.
These skis will get you down the steepest, tightest and most exposed lines out there.
A directional shape gives the ski a more consistent feel.
When the deep gets deeper, you want a ski with the float you need.
DIMENSIONS
GEOMETRY
Determines the length of the ski in centimeters along its base from end to end.
This measures the amount of sidecut the ski has in radial meters.
This measures the width of the tip of the ski at its widest point
The Effective Edge is the length of running surface along the base.
This measures the width at midsole of the skis' narrowest point.
CONSTRUCTION The wood core is inserted into a fiberglass sleeve for a lightweight, durable construction. Layers of wood and fiberglass are sandwiched together to create the highest performance ski. Semi-cap partially wraps the topsheet around the sidewall for additional durability. Inherited construction technique from central Norway, this sidewall-less design provdides superb energy transmission to the edge.
This measures the width of the tail at its widest point. Weight shows how heavy a single ski weighs in kilometers and pounds.
11
SEMI-CAP CONSTRUCTION Topsheet Fiberglass
CORE CONSTRUCTION
Topsheet
Woodcore
Sidewall Full-wrap Edge
Fiberglass Base
Dampening TAIL RISE
CAP CONSTRUCTION
TRADITIONAL
FOAM - High-density foam is injected into state-of-the-art 3D molds to create a light and responsive core for our Future Series skis.
EARLY RISE
Fiberglass HYPER-BLOCK - This core is designed with Poplar and Birch for freestyle riding, shredding laps and cruising the mountain.
REVERSE CAMBER
SANDWICH CONSTRUCTION
CLASSIC CAMBER w/EARLY RISE
Dampening
CLASSIC CAMBER
MEGA-BLOCK - Ash and Beech come together to form our most dense and damp core for the best in all-mountain dominance.
Sidewall Full-wrap Edge
Fiberglass Base
CLASSIC CAMBER w/ROCKER
INDI-BLOCK - Indigenous Maple laminates paired with a Poplar center delivers a stable, even flex along the length of the ski.
Woodcore TIP RISE
HI-LITE - A blend of poplar and beech make Hi-Lite cores snappy and lightweight with enough substance to drive wider skis in soft snow.
HALS CONSTRUCTION Topsheet
Topsheet Fiberglass
Fiberglass
Wood Cap Core -orFoam Cap Core Fiberglass Base Woodcore 2 Piece Edge Dampening
2 Piece Edge
Fiberglass Base
Dampening
13
SEMI-CAP CONSTRUCTION Topsheet Fiberglass
CORE CONSTRUCTION
Topsheet
Woodcore
Sidewall Full-wrap Edge
Fiberglass Base
Dampening TAIL RISE
CAP CONSTRUCTION
TRADITIONAL
FOAM - High-density foam is injected into state-of-the-art 3D molds to create a light and responsive core for our Future Series skis.
EARLY RISE
Fiberglass HYPER-BLOCK - This core is designed with Poplar and Birch for freestyle riding, shredding laps and cruising the mountain.
REVERSE CAMBER
SANDWICH CONSTRUCTION
CLASSIC CAMBER w/EARLY RISE
Dampening
CLASSIC CAMBER
MEGA-BLOCK - Ash and Beech come together to form our most dense and damp core for the best in all-mountain dominance.
Sidewall Full-wrap Edge
Fiberglass Base
CLASSIC CAMBER w/ROCKER
INDI-BLOCK - Indigenous Maple laminates paired with a Poplar center delivers a stable, even flex along the length of the ski.
Woodcore TIP RISE
HI-LITE - A blend of poplar and beech make Hi-Lite cores snappy and lightweight with enough substance to drive wider skis in soft snow.
HALS CONSTRUCTION Topsheet
Topsheet Fiberglass
Fiberglass
Wood Cap Core -orFoam Cap Core Fiberglass Base Woodcore 2 Piece Edge Dampening
2 Piece Edge
Fiberglass Base
Dampening
13
4FRNT TEAM
Eirik Finseth Wiley Miller
Mack Jones
Cody Barnhill Laurent Favre
Niklas Karlstrรถm
Eric Hjorleifson
David Wise
Kalle Leinonen
Torgrim Vole
15
4FRNT TEAM
Eirik Finseth Wiley Miller
Mack Jones
Cody Barnhill Laurent Favre
Niklas Karlstrรถm
Eric Hjorleifson
David Wise
Kalle Leinonen
Torgrim Vole
15
The 4FRNT team consists of athletes who share the same passion for the sport. They come from all walks of life and utilize their passion for skiing to grow and progress the sport as well as our products. Our team is where we truly become “Rider Owned, Rider Inspired”.
ERIC HJORLEIFSON
LAURENT FAVRE
CODY BARNHILL
DAVID WISE
WILEY MILLER
MACK JONES
AGE: 28 HOMETOWN: Canmore, AB SPECIALTY: Big Mountain HOME RESORT: Whistler/Blackcomb
AGE: 28 HOMETOWN: Anchorage, AK SPECIALTY: Backcountry HOME RESORT: Alta/Snowbird
AGE: 27 HOMETOWN: Billings, MT SPECIALTY: Backcountry Freestyle HOME RESORT: Alta, UT
AGE: 27 HOMETOWN: La Clusaz, France SPECIALTY: Slopestyle HOME RESORT: Alpes, France
AGE: 21 HOMETOWN: Reno, NV SPECIALTY: Halfpipe HOME RESORT: Alpine Meadows
AGE: 21 HOMETOWN: Ottawa, ON SPECIALTY: Slopestyle HOME RESORT: Whistler/Blackcomb
EIRIK FINSETH
KALLE LEINONEN
NIKLAS KARLSTRÖM
TORGRIM VOLE
AGE: 29 HOMETOWN: Oppdal, Norway SPECIALTY: Backcountry HOME RESORT: Oppdal Så Klart
AGE: 26 HOMETOWN: Kiruna, Sweden SPECIALTY: Backcountry Freestyle HOME RESORT: Åre, Sweden
Eric Hjorleifson
AGE: 22 HOMETOWN: Ylöjärvi, Finland SPECIALTY: Halfpipe HOME RESORT: Sappe Ski Center
AGE: 28 HOMETOWN: Vågå, Norway SPECIALTY: Big Mountain HOME RESORT: Chamonix, FR
Photo: Robin O’Neill Location: Mt. Meager, British Columbia 17
The 4FRNT team consists of athletes who share the same passion for the sport. They come from all walks of life and utilize their passion for skiing to grow and progress the sport as well as our products. Our team is where we truly become “Rider Owned, Rider Inspired”.
ERIC HJORLEIFSON
LAURENT FAVRE
CODY BARNHILL
DAVID WISE
WILEY MILLER
MACK JONES
AGE: 28 HOMETOWN: Canmore, AB SPECIALTY: Big Mountain HOME RESORT: Whistler/Blackcomb
AGE: 28 HOMETOWN: Anchorage, AK SPECIALTY: Backcountry HOME RESORT: Alta/Snowbird
AGE: 27 HOMETOWN: Billings, MT SPECIALTY: Backcountry Freestyle HOME RESORT: Alta, UT
AGE: 27 HOMETOWN: La Clusaz, France SPECIALTY: Slopestyle HOME RESORT: Alpes, France
AGE: 21 HOMETOWN: Reno, NV SPECIALTY: Halfpipe HOME RESORT: Alpine Meadows
AGE: 21 HOMETOWN: Ottawa, ON SPECIALTY: Slopestyle HOME RESORT: Whistler/Blackcomb
EIRIK FINSETH
KALLE LEINONEN
NIKLAS KARLSTRÖM
TORGRIM VOLE
AGE: 29 HOMETOWN: Oppdal, Norway SPECIALTY: Backcountry HOME RESORT: Oppdal Så Klart
AGE: 26 HOMETOWN: Kiruna, Sweden SPECIALTY: Backcountry Freestyle HOME RESORT: Åre, Sweden
Eric Hjorleifson
AGE: 22 HOMETOWN: Ylöjärvi, Finland SPECIALTY: Halfpipe HOME RESORT: Sappe Ski Center
AGE: 28 HOMETOWN: Vågå, Norway SPECIALTY: Big Mountain HOME RESORT: Chamonix, FR
Photo: Robin O’Neill Location: Mt. Meager, British Columbia 17
RENEGADE Signature Series Artist: Eric Hjorleifson Hals Construction IndieBlock Core Sintered Base 2-Piece Edge
Nick Greener
Photo: Phil Herbert Location: Alta, Utah
W
hen you’re standing on top of a big mountain, or when you’re looking at a perfect powder field, you don’t want a ski that’s anything less than the best. Designed by Eric Hjorleifson and Cody Barnhill in the White Room, the Renegade has revolutionized the powder ski category, while simultaneously making us re-think the way we look at camber and sidecut. The reverse camber design and stiffer flex, paired with our Reflect Technology side cut, will effortlessly create any shape turn in any condition without tip and tail hook, while still giving you the stability you need to charge big mountain lines or make high-speed carves through the crud.
“The name says it all, this ski was born to go against the accepted business & manufacturing models established within the ski industry. The design also runs against the grain of popular powder ski designs that commonly cater toward weaker intermediate skiers with poor technique: soft, sloppy with exaggerated side cut. The Renegade + Design is simple really: Utilize a ski building heritage back when skiers didn’t soley rely on using plastics; built by skiers who create each pair with pride as if every pair were their own.” – Eric Hjorleifson
196 186
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
196 cm 137x122x131 35 m 106 cm 5.9 lbs. / 2.6 kg 6'1 - 6’7 in/186 - 206 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
186 cm 135x122x129 35 m 96 cm 5.5 lbs. / 2.4 kg 5’7 - 6’4 in/176 - 196 cm
19
RENEGADE Signature Series Artist: Eric Hjorleifson Hals Construction IndieBlock Core Sintered Base 2-Piece Edge
Nick Greener
Photo: Phil Herbert Location: Alta, Utah
W
hen you’re standing on top of a big mountain, or when you’re looking at a perfect powder field, you don’t want a ski that’s anything less than the best. Designed by Eric Hjorleifson and Cody Barnhill in the White Room, the Renegade has revolutionized the powder ski category, while simultaneously making us re-think the way we look at camber and sidecut. The reverse camber design and stiffer flex, paired with our Reflect Technology side cut, will effortlessly create any shape turn in any condition without tip and tail hook, while still giving you the stability you need to charge big mountain lines or make high-speed carves through the crud.
“The name says it all, this ski was born to go against the accepted business & manufacturing models established within the ski industry. The design also runs against the grain of popular powder ski designs that commonly cater toward weaker intermediate skiers with poor technique: soft, sloppy with exaggerated side cut. The Renegade + Design is simple really: Utilize a ski building heritage back when skiers didn’t soley rely on using plastics; built by skiers who create each pair with pride as if every pair were their own.” – Eric Hjorleifson
196 186
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
196 cm 137x122x131 35 m 106 cm 5.9 lbs. / 2.6 kg 6'1 - 6’7 in/186 - 206 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
186 cm 135x122x129 35 m 96 cm 5.5 lbs. / 2.4 kg 5’7 - 6’4 in/176 - 196 cm
19
*New
Eric Hjorleifson
HOJI Signature Series Artist: Eric Hjorleifson Semi-Cap Construction Hi-Lite Core Sintered Base Full-wrap Edge
Matty Richard
Photo: Matty Richard Location: Wedge Mountain, British Columbia Elevation: 249 m/9488 ft
T
he HOJI is a direct result of the years of R&D put in by Eric Hjorleifson in creating the EHP and the Renegade. We took the same Reflect Technology of the Renegade and transferred it to a slightly narrower platform. This makes the HOJI a perfect tool for touring in the backcountry and for people seeking a functional climbing tool for the way up, without having to sacrifice anything on the way down. The HOJI is also a perfect resort ski for the big mountain resorts you find out west, or for crushing tree lines out east. Either way, the HOJI is a great option for touring and POW days.
“Based off of the performance qualities developed, tested and proven by the Renegade, the HOJI incorporates Reflect Tech, matching the rocker profile with the sidecut radius. This gives the HOJI an unparalleled powder carving sensation that I have yet to experience on any other ski (except for the Renegade of course). With a 112 mm waist it is designed to also be a versatile ski in firmer snow conditions for ski touring. I am extremely excited about the HOJI and I will have them on my feet for a good portion of the season.” – Eric Hjorleifson
195 187 179
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
195 cm 132x112x122 30 m 125 cm 5.4 lbs. / 2.4 kg 6’0 - 6’7 in/185 - 205 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
187 cm 130x112x121 30 m 112 cm 4.9 lbs. / 2.2 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
179 cm 128x112x120 30 m 109 cm 4.6 lbs. / 2.1 kg 5’5- 6’2 in/169 - 189 cm
21
*New
Eric Hjorleifson
HOJI Signature Series Artist: Eric Hjorleifson Semi-Cap Construction Hi-Lite Core Sintered Base Full-wrap Edge
Matty Richard
Photo: Matty Richard Location: Wedge Mountain, British Columbia Elevation: 249 m/9488 ft
T
he HOJI is a direct result of the years of R&D put in by Eric Hjorleifson in creating the EHP and the Renegade. We took the same Reflect Technology of the Renegade and transferred it to a slightly narrower platform. This makes the HOJI a perfect tool for touring in the backcountry and for people seeking a functional climbing tool for the way up, without having to sacrifice anything on the way down. The HOJI is also a perfect resort ski for the big mountain resorts you find out west, or for crushing tree lines out east. Either way, the HOJI is a great option for touring and POW days.
“Based off of the performance qualities developed, tested and proven by the Renegade, the HOJI incorporates Reflect Tech, matching the rocker profile with the sidecut radius. This gives the HOJI an unparalleled powder carving sensation that I have yet to experience on any other ski (except for the Renegade of course). With a 112 mm waist it is designed to also be a versatile ski in firmer snow conditions for ski touring. I am extremely excited about the HOJI and I will have them on my feet for a good portion of the season.” – Eric Hjorleifson
195 187 179
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
195 cm 132x112x122 30 m 125 cm 5.4 lbs. / 2.4 kg 6’0 - 6’7 in/185 - 205 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
187 cm 130x112x121 30 m 112 cm 4.9 lbs. / 2.2 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
179 cm 128x112x120 30 m 109 cm 4.6 lbs. / 2.1 kg 5’5- 6’2 in/169 - 189 cm
21
CRJ Signature Series
Matt Sterbenz
Artist: Paul Yih Sandwich Construction Hi-Lite Core Sintered Base Full-wrap Edge
*Limited Memorial Edition
188 180 172 164 *
Photo: Phil Herbert Location: Alta, Utah
T
he CRJ is a ski that is designed to be a do-everything soft snow ski. It’s a fun, playful and poppy ski that turns the whole mountain into your theme park. From trees and soft bumps, to miles of untracked, you’ll never find a place that the CRJs can’t shred. The CRJ has been ahead of it’s time since we launched it three years ago, the shapes and ideas from the CRJ have changed the industry’s take on all-mountain skis. “The CRJ is a ski that the late CR Johnson painted on a truly blank canvas. The original images CR sketched in the fall of 2007 were hilarious, and up until we heard him talk about the design he had drawn did we think it could work nor be as popular as it has been. A true piece of CR’s legacy - the
CRJ is a ski that provides the modern demands a mountain climate skier should expect out of an all around ski. The contact point between camber under foot and rocker in the tip and tail has a crucial point of contact with the snow that also mirrors the blend between traditional antd reverse sidecut to offer the skier the ultimate control as to when a ski should grip and when a ski should smear its turn. The controlling factor of these two techniques is made possible by a contact point located at nearly half the length where a traditional skis’ contact point should be, providing the skier a very sensitive feel of control and playfulness. The generous width makes this ski equally powerful in deep snow conditions.” – Matt Sterbenz
*
*Available in Memorial Edition
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
188 cm 130x118x128 28 m 120 cm 5.2 lbs. / 2.4 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
180 cm 126x115x124 27 m 113 cm 4.9 lbs. / 2.1 kg 5’6 - 6’2 in/170 - 190 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 122x112x120 26 m 106 cm 4.6 lbs. / 2.1 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
164 cm 120x109x117 25 m 99 cm 4.1 lbs. / 1.9 kg 5’1 - 5’7 in/154 - 174 cm
23
CRJ Signature Series
Matt Sterbenz
Artist: Paul Yih Sandwich Construction Hi-Lite Core Sintered Base Full-wrap Edge
*Limited Memorial Edition
188 180 172 164 *
Photo: Phil Herbert Location: Alta, Utah
T
he CRJ is a ski that is designed to be a do-everything soft snow ski. It’s a fun, playful and poppy ski that turns the whole mountain into your theme park. From trees and soft bumps, to miles of untracked, you’ll never find a place that the CRJs can’t shred. The CRJ has been ahead of it’s time since we launched it three years ago, the shapes and ideas from the CRJ have changed the industry’s take on all-mountain skis. “The CRJ is a ski that the late CR Johnson painted on a truly blank canvas. The original images CR sketched in the fall of 2007 were hilarious, and up until we heard him talk about the design he had drawn did we think it could work nor be as popular as it has been. A true piece of CR’s legacy - the
CRJ is a ski that provides the modern demands a mountain climate skier should expect out of an all around ski. The contact point between camber under foot and rocker in the tip and tail has a crucial point of contact with the snow that also mirrors the blend between traditional antd reverse sidecut to offer the skier the ultimate control as to when a ski should grip and when a ski should smear its turn. The controlling factor of these two techniques is made possible by a contact point located at nearly half the length where a traditional skis’ contact point should be, providing the skier a very sensitive feel of control and playfulness. The generous width makes this ski equally powerful in deep snow conditions.” – Matt Sterbenz
*
*Available in Memorial Edition
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
188 cm 130x118x128 28 m 120 cm 5.2 lbs. / 2.4 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
180 cm 126x115x124 27 m 113 cm 4.9 lbs. / 2.1 kg 5’6 - 6’2 in/170 - 190 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 122x112x120 26 m 106 cm 4.6 lbs. / 2.1 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
164 cm 120x109x117 25 m 99 cm 4.1 lbs. / 1.9 kg 5’1 - 5’7 in/154 - 174 cm
23
YLE Signature Series Artist: Max Neutra Semi-Cap Construction Hi-Lite Core Sintered Base Full-wrap Edge
Wiley Miller
W
ith Wiley Miller’s signature ski, we set out to create a backcountry park ski. When we finished the design of the YLE, we had created a ski that was so much more than that. Designed to be symmetrical, and mounted close to center, the YLE gives you the low-swing weight, sidecut and switch skiing performance of a park ski. The nearly 120mm waist paired with rocker in the tip and tail gives you all the performance you need for skiing every condition off the beaten path. The skis provide a solid platform for stomping landings no matter if it’s snowed two feet overnight, or you’re a week out from your last storm. The YLE stays true to Wiley’s skiing roots of skiing the Montana backcountry.
Photo: Freedle Coty Location: Kootenay Range, British Columbia
“The YLE excels on everything from park, crud, and ice, to pow, bc jumps and big lines. The only decision I had to make was what size to be on? I ride the 177 in park, smaller bc jumps, features, resort crusing, etc, and the 187 on bigger lines, and basically faster, bigger skiing in general. I designed the YLE to be symmetrical, meaning you can ski it switch as comfortably as forwards. I like having also more tail behind me when landing airs. If one chooses to take a spin off a cat track, bump or jump, the ski offers a low swing weight. Although you may be skiing a 187 the swing weight is more balanced than if you where to be skiing a 187 mounted 7cm’s back from true center.” – Wiley Miller
187 177
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
187 cm 140x119x140 25 m 100 cm 5.2 lbs. / 2.4 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
177 cm 138x118x138 24 m 95 cm 4.9 lbs. / 2.2 kg 5’5 - 6'2 in/167 - 187 cm
25
YLE Signature Series Artist: Max Neutra Semi-Cap Construction Hi-Lite Core Sintered Base Full-wrap Edge
Wiley Miller
W
ith Wiley Miller’s signature ski, we set out to create a backcountry park ski. When we finished the design of the YLE, we had created a ski that was so much more than that. Designed to be symmetrical, and mounted close to center, the YLE gives you the low-swing weight, sidecut and switch skiing performance of a park ski. The nearly 120mm waist paired with rocker in the tip and tail gives you all the performance you need for skiing every condition off the beaten path. The skis provide a solid platform for stomping landings no matter if it’s snowed two feet overnight, or you’re a week out from your last storm. The YLE stays true to Wiley’s skiing roots of skiing the Montana backcountry.
Photo: Freedle Coty Location: Kootenay Range, British Columbia
“The YLE excels on everything from park, crud, and ice, to pow, bc jumps and big lines. The only decision I had to make was what size to be on? I ride the 177 in park, smaller bc jumps, features, resort crusing, etc, and the 187 on bigger lines, and basically faster, bigger skiing in general. I designed the YLE to be symmetrical, meaning you can ski it switch as comfortably as forwards. I like having also more tail behind me when landing airs. If one chooses to take a spin off a cat track, bump or jump, the ski offers a low swing weight. Although you may be skiing a 187 the swing weight is more balanced than if you where to be skiing a 187 mounted 7cm’s back from true center.” – Wiley Miller
187 177
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
187 cm 140x119x140 25 m 100 cm 5.2 lbs. / 2.4 kg 5’8 - 6’5 in/177 - 197 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
177 cm 138x118x138 24 m 95 cm 4.9 lbs. / 2.2 kg 5’5 - 6'2 in/167 - 187 cm
25
*New
CODY Signature Series Artist: Dylan Barnhill Semi-Cap Construction Mega-block Core Sintered Base Full-wrap Edge
Cody Barnhill
Photo: Phil Herbert Location: The White Room
W
e wanted to design an all-mountain ski to be as at home on the groomers as on the tight, high-consequence lines you’ll find on large peaks. We tapped Cody Barnhill, our Global team rider and R&D guru, to design his ski for just this purpose. “The CODY is a ski that I designed with the idea that the less-than-epic days can be more fun if you have the right tool. With a semi-tight turn radius and long running surface, I wanted a ski that would be stable at high speeds yet capable of quick turns when things get tight.
This design is perfect for the days when it hasn’t snowed in a while and you just want to take some laps on the hill. At roughly 100 under foot, this ski can still manage a lot more than just resort skiing. The CODY has a relatively short rocker radius in both the tip and tail to provide a catch free feeling. It floats smoothly off trail and combined with a tiny taper tip and tail, this ski gives just enough ease in transition from edge to base. The art for the CODY was done by my brother, Dylan, making this ski the realization of a collaborative project that I have had in mind for a long time.” – Cody Barnhill
186 179 172
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
186 cm 129x102x124 19.3 m 135 cm 4.6 lbs. / 2.1 kg 5’8 - 6’5 in/176 - 196 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
179 cm 126x100x122 18 m 130 cm 4.2 lbs. / 1.9 kg 5’5 - 6’2 in/169 - 189 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 123x98x118 17 m 126 cm 3.8 lbs. / 1.7 kg 5’3 - 5’10 in/162 - 182 cm
27
*New
CODY Signature Series Artist: Dylan Barnhill Semi-Cap Construction Mega-block Core Sintered Base Full-wrap Edge
Cody Barnhill
Photo: Phil Herbert Location: The White Room
W
e wanted to design an all-mountain ski to be as at home on the groomers as on the tight, high-consequence lines you’ll find on large peaks. We tapped Cody Barnhill, our Global team rider and R&D guru, to design his ski for just this purpose. “The CODY is a ski that I designed with the idea that the less-than-epic days can be more fun if you have the right tool. With a semi-tight turn radius and long running surface, I wanted a ski that would be stable at high speeds yet capable of quick turns when things get tight.
This design is perfect for the days when it hasn’t snowed in a while and you just want to take some laps on the hill. At roughly 100 under foot, this ski can still manage a lot more than just resort skiing. The CODY has a relatively short rocker radius in both the tip and tail to provide a catch free feeling. It floats smoothly off trail and combined with a tiny taper tip and tail, this ski gives just enough ease in transition from edge to base. The art for the CODY was done by my brother, Dylan, making this ski the realization of a collaborative project that I have had in mind for a long time.” – Cody Barnhill
186 179 172
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
186 cm 129x102x124 19.3 m 135 cm 4.6 lbs. / 2.1 kg 5’8 - 6’5 in/176 - 196 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
179 cm 126x100x122 18 m 130 cm 4.2 lbs. / 1.9 kg 5’5 - 6’2 in/169 - 189 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 123x98x118 17 m 126 cm 3.8 lbs. / 1.7 kg 5’3 - 5’10 in/162 - 182 cm
27
TURBO Identity Series Sean Zimmermann-Wall
Artist: Mike J
The Turbo is the evolution of the Vincent Dorion brain-child, the VCT. The Turbo is a true one quiver ski that utilizes Classic Camber coupled with Early Rise in the tip to give you confidence in variable off-trail conditions, but still have the stability at speeds on the corduroy.
Sandwich Construction Hi-Light Core Sintered Base Full-wrap Edge
Photo: Phil Herbert Location: Snowbird, Utah
IDENTITY SERIES
J
ust because our Identity Series skis don’t have a pro’s name on them doesn’t mean our team doesn’t ride them. The Identity Series takes proven shapes and designs and utilizes our highest quality cores and bases. Every ski in the Identity Series has been influenced by our team riders, so you know that they will stand the test of time. You can grab the Turbo, Aretha or Madonna on any day, anywhere in the world, knowing that you have the right ski on your feet for that day.
189 182 175 168
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
189 cm 134x108x126 28 m 161 cm 5.0 lbs. / 2.3 kg 5’9 - 6’5 in/179 - 199 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
182 cm 129x104x121 27.6 m 151 cm 4.6 lbs. / 2.1 kg 5’6 - 6’2 in/172 - 192 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
175 cm 129x104x131 25.1 m 146 cm 4.2 lbs. / 1.9 kg 5’4 - 6'1 in/165 - 185 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
168 cm 124x100x116 24 m 140 cm 3.8 lbs. / 1.7 kg 5’2 - 5’8 in/158 - 178 cm
29
TURBO Identity Series Sean Zimmermann-Wall
Artist: Mike J
The Turbo is the evolution of the Vincent Dorion brain-child, the VCT. The Turbo is a true one quiver ski that utilizes Classic Camber coupled with Early Rise in the tip to give you confidence in variable off-trail conditions, but still have the stability at speeds on the corduroy.
Sandwich Construction Hi-Light Core Sintered Base Full-wrap Edge
Photo: Phil Herbert Location: Snowbird, Utah
IDENTITY SERIES
J
ust because our Identity Series skis don’t have a pro’s name on them doesn’t mean our team doesn’t ride them. The Identity Series takes proven shapes and designs and utilizes our highest quality cores and bases. Every ski in the Identity Series has been influenced by our team riders, so you know that they will stand the test of time. You can grab the Turbo, Aretha or Madonna on any day, anywhere in the world, knowing that you have the right ski on your feet for that day.
189 182 175 168
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
189 cm 134x108x126 28 m 161 cm 5.0 lbs. / 2.3 kg 5’9 - 6’5 in/179 - 199 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
182 cm 129x104x121 27.6 m 151 cm 4.6 lbs. / 2.1 kg 5’6 - 6’2 in/172 - 192 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
175 cm 129x104x131 25.1 m 146 cm 4.2 lbs. / 1.9 kg 5’4 - 6'1 in/165 - 185 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
168 cm 124x100x116 24 m 140 cm 3.8 lbs. / 1.7 kg 5’2 - 5’8 in/158 - 178 cm
29
ARETHA Identity Series
*New
Artist: Paul Yih
MADONNA Identity Series
Artist: Harry Lau
The women on our team were consistently asking for a women’s specific ski that could hold up to aggressive skiing in all terrain. Cut from the same cloth as the Turbo. The Aretha has Classic Camber, Early Rise in the tip, and up to 104mm underfoot to allow for float and stability in all conditions.
The Madonna has been completely redesigned for this year incorporating a short rocker radius in the tip and tail with camber under foot. It also has a tapered tail for easy edge to edge carving. The Madonna is the all-mountain answer for our women skiers.
Sandwich Construction
Semi-Cap Construction
Hi-Light Core Sintered Base Full-wrap Edge
175 168 159
Mega-block Core Sintered Base Full-wrap Edge
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
175 cm 129x104x116 25.1 m 146 cm 4.2 lbs. / 1.9kg 5’4 - 6’1 in/165 - 185 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
168 cm 124x100x116 24 m 140 cm 3.8 lbs. / 1.7 kg 5’2 - 5’8 in/158 - 178 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
159 cm 124x100x116 23.1 m 134 cm 3.2 lbs. / 1.5 kg 4’9 - 5’6 in/149 - 169 cm
172 165 158
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 123x98x118 17 m 126 cm 3.8 lbs. / 1.7 kg 5’3 - 5'10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
165 cm 120x96x115 16 m 118.5 cm 3.3 lbs. / 1.5 kg 5’1 - 5’7 in/155 - 175 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
158 cm 119x94x114 15 m 113 cm 3.2 lbs. / 1.5 kg 4’9 - 5’5 in/148 - 168 cm
31
ARETHA Identity Series
*New
Artist: Paul Yih
MADONNA Identity Series
Artist: Harry Lau
The women on our team were consistently asking for a women’s specific ski that could hold up to aggressive skiing in all terrain. Cut from the same cloth as the Turbo. The Aretha has Classic Camber, Early Rise in the tip, and up to 104mm underfoot to allow for float and stability in all conditions.
The Madonna has been completely redesigned for this year incorporating a short rocker radius in the tip and tail with camber under foot. It also has a tapered tail for easy edge to edge carving. The Madonna is the all-mountain answer for our women skiers.
Sandwich Construction
Semi-Cap Construction
Hi-Light Core Sintered Base Full-wrap Edge
175 168 159
Mega-block Core Sintered Base Full-wrap Edge
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
175 cm 129x104x116 25.1 m 146 cm 4.2 lbs. / 1.9kg 5’4 - 6’1 in/165 - 185 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
168 cm 124x100x116 24 m 140 cm 3.8 lbs. / 1.7 kg 5’2 - 5’8 in/158 - 178 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
159 cm 124x100x116 23.1 m 134 cm 3.2 lbs. / 1.5 kg 4’9 - 5’6 in/149 - 169 cm
172 165 158
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 123x98x118 17 m 126 cm 3.8 lbs. / 1.7 kg 5’3 - 5'10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
165 cm 120x96x115 16 m 118.5 cm 3.3 lbs. / 1.5 kg 5’1 - 5’7 in/155 - 175 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
158 cm 119x94x114 15 m 113 cm 3.2 lbs. / 1.5 kg 4’9 - 5’5 in/148 - 168 cm
31
SWITCHBLADE Park Series Artist: Abe Kislevitz
The Switchblade has become our go-to ski for all of our top park and pipe skiers. Stiff enough for you to stomp any landing but playful enough for buttering and jibbing around all the transitions your mountain has to offer.
Laurent Favre
Semi-Cap Construction Hyper-block Core Sintered Base Full-wrap Edge
*176cm and 166cm colorway
181 176 171 166 156
* Photo: Matt Sterbenz Location: Copper Mtn., Colorado
PARK SERIES
W
hether it’s in the park, the pipe, or on a covert urban mission, our park skis are designed to take the abuse of the modern-day jibber, while still maintaining the 4FRNT quality and ride. Bomber construction, light-weight materials and progressive flexes make our Park Series the pinnacle of the jib-industry. We use cap and semi-cap construction to keep your topsheets intact and looking fresh, and use quality base materials to keep them running fast no matter what the conditions. With park and pipe heading for the Olympics, we demand the highest level of performance from our park skis to get our riders to the next level.
*
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
181 cm 122x89x116 18.4 m 160 cm 4.4 lbs. / 2.0 kg 5’6 - 6’2 in/171 - 191 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
176 cm 121x88x114 17.2 m 155 cm 4 lbs. / 1.9 kg 5’4 - 6’1 in/166 - 186 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
171 cm 120x86x112 16.1 m 150 cm 3.7 lbs. / 1.6 kg 5’3 - 5’10 in/161 - 181 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
166 cm 119x85x112 14.9 m 145 cm 3.5 lbs. / 1.6 kg 5’2 - 5’7 in/156 - 176 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
156 cm 117x83x110 13.8 m 135 cm 3.1 lbs. / 1.4 kg 4’8 - 5’4 in/146 - 166 cm
33
SWITCHBLADE Park Series Artist: Abe Kislevitz
The Switchblade has become our go-to ski for all of our top park and pipe skiers. Stiff enough for you to stomp any landing but playful enough for buttering and jibbing around all the transitions your mountain has to offer.
Laurent Favre
Semi-Cap Construction Hyper-block Core Sintered Base Full-wrap Edge
*176cm and 166cm colorway
181 176 171 166 156
* Photo: Matt Sterbenz Location: Copper Mtn., Colorado
PARK SERIES
W
hether it’s in the park, the pipe, or on a covert urban mission, our park skis are designed to take the abuse of the modern-day jibber, while still maintaining the 4FRNT quality and ride. Bomber construction, light-weight materials and progressive flexes make our Park Series the pinnacle of the jib-industry. We use cap and semi-cap construction to keep your topsheets intact and looking fresh, and use quality base materials to keep them running fast no matter what the conditions. With park and pipe heading for the Olympics, we demand the highest level of performance from our park skis to get our riders to the next level.
*
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
181 cm 122x89x116 18.4 m 160 cm 4.4 lbs. / 2.0 kg 5’6 - 6’2 in/171 - 191 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
176 cm 121x88x114 17.2 m 155 cm 4 lbs. / 1.9 kg 5’4 - 6’1 in/166 - 186 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
171 cm 120x86x112 16.1 m 150 cm 3.7 lbs. / 1.6 kg 5’3 - 5’10 in/161 - 181 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
166 cm 119x85x112 14.9 m 145 cm 3.5 lbs. / 1.6 kg 5’2 - 5’7 in/156 - 176 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
156 cm 117x83x110 13.8 m 135 cm 3.1 lbs. / 1.4 kg 4’8 - 5’4 in/146 - 166 cm
33
CLICK! Park Series
BLONDIE Park Series
The Click! is a light-weight, buttery park ski that hasn’t cut any corners when it comes to construction quality. With a full wood core, Bombtop topsheet and cap construction, this ski is perfect for the skier who is looking to dabble in the terrain park or is just looking for a lively, light weight ski.
The Blondie is the twin sister of the Click! It is a women's park/pipe specific ski. One way or another the cap construction, full wood core and structured top sheet are a ingredients for tearing up your local park.
Artist: Yale Wolf
Cap Construction
Cap Construction HyperBlock Core Extruded Base Bombtop Topsheet
HyperBlock Core Extruded Base Bombtop Topsheet
177 172 167 162 157
Artist: Yale Wolf
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
177 cm 120x88x115 19 m 155 cm 4.4 lbs. / 2.0 kg 5’5 - 6’2 in/167 - 187 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 119x87x114 18 m 148 cm 4.0 lbs. / 1.9 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
167 cm 118x86x113 17 m 142 cm 3.7 lbs. / 1.6 kg 5’2 - 5’8 in/157 - 177 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
162 cm 117x85x112 16 m 135 cm 3.4 lbs. / 1.5 kg 5’0 - 5’6 in/152 - 172 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 116x84x111 15 m 130 cm 3.0 lbs. / 1.4 kg 4’8 - 5’4 in/147 - 167 cm
172 167 162 157
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 119x87x114 18 m 148 cm 4.0 lbs. / 1.9 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
167 cm 118x86x113 17 m 142 cm 3.7 lbs. / 1.6 kg 5’2 - 5’8 in/157 - 177 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
162 cm 117x85x112 16 m 135 cm 3.4 lbs. / 1.5 kg 5’0 - 5’6 in/152 - 172 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 116x84x111 15 m 130 cm 3.0 lbs. / 1.4 kg 4’8 - 5’4 in/147 - 167 cm
35
CLICK! Park Series
BLONDIE Park Series
The Click! is a light-weight, buttery park ski that hasn’t cut any corners when it comes to construction quality. With a full wood core, Bombtop topsheet and cap construction, this ski is perfect for the skier who is looking to dabble in the terrain park or is just looking for a lively, light weight ski.
The Blondie is the twin sister of the Click! It is a women's park/pipe specific ski. One way or another the cap construction, full wood core and structured top sheet are a ingredients for tearing up your local park.
Artist: Yale Wolf
Cap Construction
Cap Construction HyperBlock Core Extruded Base Bombtop Topsheet
HyperBlock Core Extruded Base Bombtop Topsheet
177 172 167 162 157
Artist: Yale Wolf
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
177 cm 120x88x115 19 m 155 cm 4.4 lbs. / 2.0 kg 5’5 - 6’2 in/167 - 187 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 119x87x114 18 m 148 cm 4.0 lbs. / 1.9 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
167 cm 118x86x113 17 m 142 cm 3.7 lbs. / 1.6 kg 5’2 - 5’8 in/157 - 177 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
162 cm 117x85x112 16 m 135 cm 3.4 lbs. / 1.5 kg 5’0 - 5’6 in/152 - 172 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 116x84x111 15 m 130 cm 3.0 lbs. / 1.4 kg 4’8 - 5’4 in/147 - 167 cm
172 167 162 157
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
172 cm 119x87x114 18 m 148 cm 4.0 lbs. / 1.9 kg 5’3 - 5’10 in/162 - 182 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
167 cm 118x86x113 17 m 142 cm 3.7 lbs. / 1.6 kg 5’2 - 5’8 in/157 - 177 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
162 cm 117x85x112 16 m 135 cm 3.4 lbs. / 1.5 kg 5’0 - 5’6 in/152 - 172 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 116x84x111 15 m 130 cm 3.0 lbs. / 1.4 kg 4’8 - 5’4 in/147 - 167 cm
35
Ethan Swadburg
YLE Coyote Future Series Artist: Max Neutra
Finally! Symmetrical powder skis for the young rippers. The YLE Coyote is based off of the YLE, Wiley Miller's signature ski. Whether it’s venturing out on their own or just trying to keep up with dad, this ski bridges the gap for a lot of young skiers dialing in their backcountry skills.
Cap Construction Foam Cap Core Extruded Base 2 Piece Edge
Photo: Matt Sterbenz Location: Copper Mtn., Colorado
FUTURE SERIES
W
e want to make junior skis that are a springboard to learning and progression. That means we take adult ski technology and shapes and tweak them to make them light, playful and fun for young skiers. We have switched over to foam cores to allow for softer flex and cap construction to make them light and durable. What we haven’t done is skimp on any of the cutting-edge shapes from our adult lines. This allows the shredder to have a ski that’s forgiving enough to learn on, but will still support a higher level of skiing across a wide range of terrain.
157 147 137
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 128x110x128 14 m 87 cm 3.5 lbs. / 1.6 kg 4’8 - 5’4 in/ 147 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
147cm 122x105x122 13 m 79 cm 3.1 lbs. / 1.4 kg 4’5 - 5’2 in/137 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
137 cm 117x100x117 12 m 72 cm 2.8 lbs. / 1.3 kg 4'2 - 4’ in/127 - 147 cm
37
Ethan Swadburg
YLE Coyote Future Series Artist: Max Neutra
Finally! Symmetrical powder skis for the young rippers. The YLE Coyote is based off of the YLE, Wiley Miller's signature ski. Whether it’s venturing out on their own or just trying to keep up with dad, this ski bridges the gap for a lot of young skiers dialing in their backcountry skills.
Cap Construction Foam Cap Core Extruded Base 2 Piece Edge
Photo: Matt Sterbenz Location: Copper Mtn., Colorado
FUTURE SERIES
W
e want to make junior skis that are a springboard to learning and progression. That means we take adult ski technology and shapes and tweak them to make them light, playful and fun for young skiers. We have switched over to foam cores to allow for softer flex and cap construction to make them light and durable. What we haven’t done is skimp on any of the cutting-edge shapes from our adult lines. This allows the shredder to have a ski that’s forgiving enough to learn on, but will still support a higher level of skiing across a wide range of terrain.
157 147 137
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
157 cm 128x110x128 14 m 87 cm 3.5 lbs. / 1.6 kg 4’8 - 5’4 in/ 147 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
147cm 122x105x122 13 m 79 cm 3.1 lbs. / 1.4 kg 4’5 - 5’2 in/137 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
137 cm 117x100x117 12 m 72 cm 2.8 lbs. / 1.3 kg 4'2 - 4’ in/127 - 147 cm
37
GROM
Future Series
Artist: Harry Lau
The Grom is the perfect all-mountain ski for those getting in their early turns. It’s a cap ski that incorporates Classic Camber with a bit of Early-Rise in the tips for easy turning from edge to edge. With five lengths, the Grom serves a variety of ages and abilities.
Cap Construction Foam Cap Core Extruded Base
SLACK SLOG DUBS BUNGA Ski Poles No quiver is complete without poles. From left to right we offer the Bunga kids pole, the Dubs pole which is a park style pole with an aluminum shaft. The Slack pole is our light weight composite pole and the Slog pole is our adjustable pole for all our ski tour fans.
BUNGA
147 137 127 117 107
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
147 cm 115x83x110 14 m 128 cm 2.8 lbs. / 1.27 kg 4’5 - 5’2 in/137 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
137 cm 113x82x108 13 m 123 cm 2.4 lbs. / 1.08 kg 4’2 - 4’8 in/127 - 147 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
127 cm 111x81x106 12 m 116 cm 2.1 lbs. / 0.95 kg 3’8 - 4’5 in/117 - 137 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
117 cm 109x80x104 11 m 110 cm 1.7 lbs. / 0.77 kg 3’5 - 4’2 in/107 - 127 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
107 cm 107x79x102 10 m 104 cm 1.6 lbs. / 0.66 kg 3’2 - 3’8 in/97 - 117 cm
Length: 70- 105 cm 14mm 5085Aluminum Shaft Fixed Disc System Rubber Race Grip Style
DUBS
Length: 100-135cm 18mm 5085 Aluminum Shaft Fixed Disc System Rubber Race Grip Style
SLACK
Length: 100-135cm 16mm Composite Shaft Fixed POW Basket System Dual Density Pistol Grip
SLOG
Length: Adjustable 100 cm - 135cm 18/16mm 7075 Aluminum Shaft Fixed POW Basket System Dual Density Pistol Grip
39
GROM
Future Series
Artist: Harry Lau
The Grom is the perfect all-mountain ski for those getting in their early turns. It’s a cap ski that incorporates Classic Camber with a bit of Early-Rise in the tips for easy turning from edge to edge. With five lengths, the Grom serves a variety of ages and abilities.
Cap Construction Foam Cap Core Extruded Base
SLACK SLOG DUBS BUNGA Ski Poles No quiver is complete without poles. From left to right we offer the Bunga kids pole, the Dubs pole which is a park style pole with an aluminum shaft. The Slack pole is our light weight composite pole and the Slog pole is our adjustable pole for all our ski tour fans.
BUNGA
147 137 127 117 107
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
147 cm 115x83x110 14 m 128 cm 2.8 lbs. / 1.27 kg 4’5 - 5’2 in/137 - 157 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
137 cm 113x82x108 13 m 123 cm 2.4 lbs. / 1.08 kg 4’2 - 4’8 in/127 - 147 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
127 cm 111x81x106 12 m 116 cm 2.1 lbs. / 0.95 kg 3’8 - 4’5 in/117 - 137 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
117 cm 109x80x104 11 m 110 cm 1.7 lbs. / 0.77 kg 3’5 - 4’2 in/107 - 127 cm
Length: Dimension: Turn Radius: Edge: Weight: Suggested Height:
107 cm 107x79x102 10 m 104 cm 1.6 lbs. / 0.66 kg 3’2 - 3’8 in/97 - 117 cm
Length: 70- 105 cm 14mm 5085Aluminum Shaft Fixed Disc System Rubber Race Grip Style
DUBS
Length: 100-135cm 18mm 5085 Aluminum Shaft Fixed Disc System Rubber Race Grip Style
SLACK
Length: 100-135cm 16mm Composite Shaft Fixed POW Basket System Dual Density Pistol Grip
SLOG
Length: Adjustable 100 cm - 135cm 18/16mm 7075 Aluminum Shaft Fixed POW Basket System Dual Density Pistol Grip
39
4FRNT BINDINGS All of our bindings come from a mixture of World Cup proven race and freeride technology to create a globally renowned platform capable of supporting the highest performance and safety standards in the industry.
DEADBOLTS
Deadbolt 13
Deadbolt brake width’s available in: 78mm, 88mm, 97mm, 115mm, 130mm, 150mm
4-13 DIN
Deadbolt 15 5-15 DIN
THUNDERBOLT 8-18 DIN
PADLOCKS
Padlock brake width’s available in: 78mm, 90mm, 115mm, 130mm, 150mm
Padlock 11 3-11 DIN
Padlock 7 COMPATIBLE
2-7.5 DIN 90mm stock brake *Fits Jr. and Adult boots
Free your Deadbolts! The engineers at MFD have created their ALLTIME AT touring plate to turn your 4FRNT Deadbots into Alpine Touring machines! 41
4FRNT BINDINGS All of our bindings come from a mixture of World Cup proven race and freeride technology to create a globally renowned platform capable of supporting the highest performance and safety standards in the industry.
DEADBOLTS
Deadbolt 13
Deadbolt brake width’s available in: 78mm, 88mm, 97mm, 115mm, 130mm, 150mm
4-13 DIN
Deadbolt 15 5-15 DIN
THUNDERBOLT 8-18 DIN
PADLOCKS
Padlock brake width’s available in: 78mm, 90mm, 115mm, 130mm, 150mm
Padlock 11 3-11 DIN
Padlock 7 COMPATIBLE
2-7.5 DIN 90mm stock brake *Fits Jr. and Adult boots
Free your Deadbolts! The engineers at MFD have created their ALLTIME AT touring plate to turn your 4FRNT Deadbots into Alpine Touring machines! 41
Photo: Markus Alatalo Location: Montgenevre, France
4FRNT TOURING
We have expanded our accessories by offering an adjustable pole, pre-cut skins, and an all new touring binding to compliment the Deadbolt compatible All-Time touring plate. The backcountry experience awaits you. Niklas Karlstrรถm
ADRENALIN TOURING BINDING
The Adrenalin is your magic carpet ride up to the backcountry. Compatible with both touring and alpine boots, a maximum DIN of 16, and the ability to switch to skiing mode without having to get out of the binding, the Adrenalin gives you unparalleled uphill performance without compromising the downhill stability you need to get the goods you worked for.
SLOG
Length: Adjustable to 135cm 18/16mm 7075 Aluminum Shaft Fixed POW Basket System Dual Density Pistol Grip
4FRNT EVO CLIMBING SKINS
Our EVO skins are composed of a glueless, silicon system which are effortless to apply in comparison to epoxy based adhesion systems. We surface our skins with a nylon fabric for maximum durablity and versatility for custom fitting.
4FRNT EVO Pre-cut Skins HOJI & Renegade
Custom laser cut and printed skins that mirror the same shape outline as the ski itself.
4FRNT EVO Tour
These printed, square shaped skins are ready to be cut for your specific ski. Lengths: 180cm, 195cm Widths: 110mm, 120mm, 130mm 43
Photo: Markus Alatalo Location: Montgenevre, France
4FRNT TOURING
We have expanded our accessories by offering an adjustable pole, pre-cut skins, and an all new touring binding to compliment the Deadbolt compatible All-Time touring plate. The backcountry experience awaits you. Niklas Karlstrรถm
ADRENALIN TOURING BINDING
The Adrenalin is your magic carpet ride up to the backcountry. Compatible with both touring and alpine boots, a maximum DIN of 16, and the ability to switch to skiing mode without having to get out of the binding, the Adrenalin gives you unparalleled uphill performance without compromising the downhill stability you need to get the goods you worked for.
SLOG
Length: Adjustable to 135cm 18/16mm 7075 Aluminum Shaft Fixed POW Basket System Dual Density Pistol Grip
4FRNT EVO CLIMBING SKINS
Our EVO skins are composed of a glueless, silicon system which are effortless to apply in comparison to epoxy based adhesion systems. We surface our skins with a nylon fabric for maximum durablity and versatility for custom fitting.
4FRNT EVO Pre-cut Skins HOJI & Renegade
Custom laser cut and printed skins that mirror the same shape outline as the ski itself.
4FRNT EVO Tour
These printed, square shaped skins are ready to be cut for your specific ski. Lengths: 180cm, 195cm Widths: 110mm, 120mm, 130mm 43
Location: 4FRNT StoreFRNT - Salt Lake City, Utah
4FRNT APPAREL All our apparel is custom made. We utilize cut and sew garments to fit our specific styling needs. Just like our skis, we ensure high quality and influence on all our designs. Our T-shirts are made with poly/cotton blend fabric and our sweatshirts are made using Terry cotton for that loose, comfortable feel.
Zion T
Black/multi-color M, L, XL,XXL
Nomad T
Sequence T
Grey/multi-color M, L, XL, XXL
Black/Grey, Blue-Grey/Grey M, L, XL, XXL
Tyrol T Twenty20 T
Tan/multi-color M, L, XL, XXL
Black/White, Yellow/Black M, L, XL, XXL
Billboard Tall T Black/White, Red/Yellow XLT, XXLT, XXXLT
Billboard T
Blk/Wht, Red/Wht, Wht/Blk, Yl/Blk M, L, XL, XXL 45
Location: 4FRNT StoreFRNT - Salt Lake City, Utah
4FRNT APPAREL All our apparel is custom made. We utilize cut and sew garments to fit our specific styling needs. Just like our skis, we ensure high quality and influence on all our designs. Our T-shirts are made with poly/cotton blend fabric and our sweatshirts are made using Terry cotton for that loose, comfortable feel.
Zion T
Black/multi-color M, L, XL,XXL
Nomad T
Sequence T
Grey/multi-color M, L, XL, XXL
Black/Grey, Blue-Grey/Grey M, L, XL, XXL
Tyrol T Twenty20 T
Tan/multi-color M, L, XL, XXL
Black/White, Yellow/Black M, L, XL, XXL
Billboard Tall T Black/White, Red/Yellow XLT, XXLT, XXXLT
Billboard T
Blk/Wht, Red/Wht, Wht/Blk, Yl/Blk M, L, XL, XXL 45
Winnfield Jacket Black Wool/Heather Grey Fleece M, L, XL, XXL
Wallace Zip-up Black/Heather Grey/Yellow M, L, XL, XXL
Vega Crew Jules Pullover
Black/Heather Grey M, L, XL, XXL
Black/White, Red/White M, L, XL, XXL
Ringo Hooded LS Grey/Blue-Grey M, L, XL, XXL
Women’s Sunday Hoodie Grey/Aqua/Magenta S, M, L
Location: 4FRNT StoreFRNT - Salt Lake City, Utah 47
Winnfield Jacket Black Wool/Heather Grey Fleece M, L, XL, XXL
Wallace Zip-up Black/Heather Grey/Yellow M, L, XL, XXL
Vega Crew Jules Pullover
Black/Heather Grey M, L, XL, XXL
Black/White, Red/White M, L, XL, XXL
Ringo Hooded LS Grey/Blue-Grey M, L, XL, XXL
Women’s Sunday Hoodie Grey/Aqua/Magenta S, M, L
Location: 4FRNT StoreFRNT - Salt Lake City, Utah 47
4FRNT ACCESSORIES
Cuffed
Uptown Fitted
Grey/Black, Black/Grey 7 1/8, 7 1/4, 7 3/8, 7 1/2
Uncuffed
Marvin Beanie
Winston Beanie
Red,Black
Black, Grey, Red
Butch Beanie Blue-Grey, Grey
Metro Fitted
Black, Crimson 7 1/8, 7 1/4, 7 3/8, 7 1/2
Avalon7/4FRNT Co-lab Microfiber Tube Black/Yellow 10 in. x 20 in.
P.O.P. Bike Lane
Olive Canvas, Grey Wool Adjustable
Store Sign Double-sided Foam-core sign 10 in. x 14 in.
Posters
Semi-gloss 13 in x 19 in.
49
4FRNT ACCESSORIES
Cuffed
Uptown Fitted
Grey/Black, Black/Grey 7 1/8, 7 1/4, 7 3/8, 7 1/2
Uncuffed
Marvin Beanie
Winston Beanie
Red,Black
Black, Grey, Red
Butch Beanie Blue-Grey, Grey
Metro Fitted
Black, Crimson 7 1/8, 7 1/4, 7 3/8, 7 1/2
Avalon7/4FRNT Co-lab Microfiber Tube Black/Yellow 10 in. x 20 in.
P.O.P. Bike Lane
Olive Canvas, Grey Wool Adjustable
Store Sign Double-sided Foam-core sign 10 in. x 14 in.
Posters
Semi-gloss 13 in x 19 in.
49
4FRNT REPRESENTATIVES USA:
Bryan Reuer Pacific Northwest 509-990-9623 bryan.reuer@4frnt.com
Ryan Cornish New England 914-826-0763 ryan.cornish@4frnt.com
Derek Dimitri California and Nevada 775-815-4511 derek.dimitri@4frnt.com
Dayne Anderson Southeast 828-898-9786 dealine@gmail.com
Joey Weamer Northern Rockies 406-360-2547 joey.weamer@4frnt.com Alex Goyzueta Utah and Colorado 801-541-8031 alex.goyzueta@4frnt.com Jonny Gauld Arizona and New Mexico 928-814-8008 jonny.gauld@4frnt.com Cody Prudoehl Upper Midwest 507-398-5141 cody.p.mw@gmail.com Dan Copeland Lower Midwest 612-708-1421 dan.copeland.mw@gmail.com Ralph Palladino NY, NJ, PA, MD, DE 516-445-6970 rpoutfitters@optonline.net
Australia
Sportfactor sfisher@sportfactor.com.au
Chile
Da’ski Info@Daski.cl
Czech Republic
Photo: Tim Lloyd Location: Japan
Norway
7Blaner www.7blaner.no post@7blaner.no
Russia
Freestyle Sport Center helena@snowmag.ru
N Distribution www.Ndistribution.cz 4frnt@ndistribution.com
Spain
Andrew Clough Western Canada 778-995-7441 andrew.clough@4frnt.com
Finland
Sweden
Charles Leger Quebec 514-743-0852 charles-leger@hotmail.com
France
Canada:
Ryan Rouleau Ontario 613-795-4014 ryan.rouleau@4frnt.com Cole Fawcett Atlantic Provinces 506-872-2290 fawcett.cole@gmail.com
FOR ALL OTHER SALES OR DEALER INQUIRES: Randolph Green North American Sales Manager 801-975-9500 ext.502 randolph.green@4frnt.com
Jari Laakso Oy www.laakso.fi info@laakso.fi
General Outdoor Goutdoor@goutdoor.com
RA Import martin.haglev@raa.no
Switzerland
4FRNT Europe Ltd. France@4frnt.com
Dac Sport www.dacsport.ch info@dacsport.com
Germany/Austria
Everywhere Else
Richard Schurf - Gmbh richard.schuerf@freeheeler.eu
Italy
Wave Distribution www.wavedistribution.it info@wavedistribution.it
Wiley Miller
Matt Sterbenz 801-975-9500 ext.504 Matt.Sterbenz@4frnt.com Find a shop near you.
Japan
Powwave Co. LTD www.powwave.com Yoshizawahideo@mac.com
New Zealand
Kamai Sports LTD info@kamaisport.co.nz
51
4FRNT REPRESENTATIVES USA:
Bryan Reuer Pacific Northwest 509-990-9623 bryan.reuer@4frnt.com
Ryan Cornish New England 914-826-0763 ryan.cornish@4frnt.com
Derek Dimitri California and Nevada 775-815-4511 derek.dimitri@4frnt.com
Dayne Anderson Southeast 828-898-9786 dealine@gmail.com
Joey Weamer Northern Rockies 406-360-2547 joey.weamer@4frnt.com Alex Goyzueta Utah and Colorado 801-541-8031 alex.goyzueta@4frnt.com Jonny Gauld Arizona and New Mexico 928-814-8008 jonny.gauld@4frnt.com Cody Prudoehl Upper Midwest 507-398-5141 cody.p.mw@gmail.com Dan Copeland Lower Midwest 612-708-1421 dan.copeland.mw@gmail.com Ralph Palladino NY, NJ, PA, MD, DE 516-445-6970 rpoutfitters@optonline.net
Australia
Sportfactor sfisher@sportfactor.com.au
Chile
Da’ski Info@Daski.cl
Czech Republic
Photo: Tim Lloyd Location: Japan
Norway
7Blaner www.7blaner.no post@7blaner.no
Russia
Freestyle Sport Center helena@snowmag.ru
N Distribution www.Ndistribution.cz 4frnt@ndistribution.com
Spain
Andrew Clough Western Canada 778-995-7441 andrew.clough@4frnt.com
Finland
Sweden
Charles Leger Quebec 514-743-0852 charles-leger@hotmail.com
France
Canada:
Ryan Rouleau Ontario 613-795-4014 ryan.rouleau@4frnt.com Cole Fawcett Atlantic Provinces 506-872-2290 fawcett.cole@gmail.com
FOR ALL OTHER SALES OR DEALER INQUIRES: Randolph Green North American Sales Manager 801-975-9500 ext.502 randolph.green@4frnt.com
Jari Laakso Oy www.laakso.fi info@laakso.fi
General Outdoor Goutdoor@goutdoor.com
RA Import martin.haglev@raa.no
Switzerland
4FRNT Europe Ltd. France@4frnt.com
Dac Sport www.dacsport.ch info@dacsport.com
Germany/Austria
Everywhere Else
Richard Schurf - Gmbh richard.schuerf@freeheeler.eu
Italy
Wave Distribution www.wavedistribution.it info@wavedistribution.it
Wiley Miller
Matt Sterbenz 801-975-9500 ext.504 Matt.Sterbenz@4frnt.com Find a shop near you.
Japan
Powwave Co. LTD www.powwave.com Yoshizawahideo@mac.com
New Zealand
Kamai Sports LTD info@kamaisport.co.nz
51
2900 S. West Temple - Salt Lake City, UT 84115 - (801) 975 9500 - skierservice@4FRNT.com - www.4FRNT.com Cover Art - Harry Lau - Layout/Design - Paul Yih - Š 2012