MIDDLE GEAR
ENG
d. Press each bearing into the universal joint using a suitable socket. NOTE: The bearing must be inserted far enough into the universal joint so that the circlip can be installed. e. Install the circlips 2 into the groove of each bearing. ▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
R.
1
Install: drive shaft coupling washer nut 1 97 Nm (9.7 m · kg, 70 ft · lb) T.
6. • • •
NOTE: Use the coupling gear/middle shaft tool 2 to hold the drive shaft coupling.
2 Coupling gear/middle shaft tool P/N. YM-01229, 90890-01229
INSTALLING THE MIDDLE DRIVE SHAFT 1. Tighten: • middle drive pinion gear nut 1 New T.
R.
145 Nm (14.5 m · kg, 105 ft · lb)
NOTE: Secure the middle drive shaft in the vise with a clean rag. 2. Lock the threads with a drift punch.
4 - 97