CLEANING THE AIR FILTER/ CHECKING THE COOLANT LEVEL
CHK ADJ
c. Apply Yamaha foam air filter oil or other quality foam air filter oil. d. Squeeze out the excess oil. NOTE: The element should be wet but not dripping. ▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
6. Install: • air filter element • air filter case cover NOTE: To prevent air leaks make sure that the sealing surface of the element matches the sealing surface of the case. 7. • • •
Install: console passenger seat driver seat Refer to “SEATS, ENCLOSURE, HOOD AND CARGO BED” in chapter 8.
CHECKING THE COOLANT LEVEL 1. Place the vehicle on a level surface. 2. Lift the hood up. 3. Check: • coolant level The coolant level should be between the minimum level mark a and maximum level mark b. Below the minimum level mark → Add the recommended coolant to the proper level. CAUTION: • Adding water instead of coolant lowers the antifreeze content of the coolant. If water is used instead of coolant, check and if necessary, correct the antifreeze concentration of the coolant. • Use only distilled water. However, soft water may be used if distilled water is not available.
3 - 18