manual for the 660 Yamaha Rhino '04-07

Page 134

CHANGING THE ENGINE OIL/ CLEANING THE AIR FILTER

CHK ADJ

11.Check: • engine oil pressure ▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼

a. Slightly loosen the oil gallery bolt 1. b. Start the engine and keep it idling until engine oil starts to seep from the oil gallery bolt. If no engine oil comes out after one minute, turn the engine off so that it will not seize. c. Check the engine oil passages, the oil filter cartridge and the oil pump for damage or leakage. Refer to “CRANKSHAFT AND OIL PUMP” in chapter 4. d. Start the engine after solving the problem(s) and check the engine oil pressure again. e. Tighten the oil gallery bolt to specification.

T.

Oil gallery bolt 7 Nm (0.7 m · kg, 5.1 ft · lb)

R.

▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲

12.Install: • console • passenger seat • driver seat Refer to “SEATS, ENCLOSURE, HOOD AND CARGO BED” in chapter 8.

CLEANING THE AIR FILTER NOTE: There is a check hose 1 at the bottom of the air filter case. If dust and/or water collects in this hose, clean the air filter element and air filter case. 1. • • •

3 - 16

Remove: driver seat passenger seat console Refer to “SEATS, ENCLOSURE, HOOD AND CARGO BED” in chapter 8.


Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.