Tools on hanging cardboard

The images shown in this catalogue are not binding. Stanley Black & Decker italia S.r.l. reserves the right to change the technical characteristics of its products at any time.

Tools on hanging cardboard Two sizes of cardboard: 50x130 or 70x180 mm. Each product has an identification label with EAN code and product code

2858822Pz 1 Art 00 37

091 PH

Cod 80

ISO 8764 DIN 5260

Screwdrivers for PHILLIPS screws 1000 V ®

- Silicon, Manganese and Molybdenum steel blade with phosphatized finish - Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle to identify the different shapes - Each one is tested according to the European standard EN 60900 to ensure safe work - IMQ Certification L mm

n°xa

081 EX

ISO 5745 EN 60900

- Suitable for gripping and cutting operations in precision engineering - Pointed nose with knurled gripping surface - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Open hinge with forged joint - Insulated ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Protective enamelled finish - Each one is tested according to the European standard EN 60900 to ensure safe work - IMQ Certification 1600 N/mm2

160

ø max mm

1,6

Cod. code

a Q.tà x conf.

€

U00810103D 1

085 EX

ISO 5746 EN 60900

- Nose with knurled inner surface to grip flat material - Knurled gripping area to hold round material - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Open hinge with forged joint - Insulated ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Protective enamelled finish - Each one is tested according to the European standard EN 60900 to ensure safe work - IMQ Certification 2100 N/mm2 ø max mm

180 2,0

362

Cod. code

a Q.tà x conf.

U00850110D 1

€

Cod. code

179 209 245 275

a Q.tà x conf.

€

U00910023D 1 U00910025D 1 U00910027D 1 U00910029D 1

- Lengthened and pointed head - Clean and precise cut even on the extremities of cutting edges - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Fulcrum closer to the cutting edge to reduce effort during cutting operations - Open hinge with forged joint - Insulated ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Protective enamelled finish - Each one is tested according to the European standard EN 60900 to ensure safe work - IMQ Certification L mm

2200 N/mm2 ø max mm

140 1,4 160 1,6

Combination pliers - 1000 V

L mm

ISO 5749 EN 60900

Diagonal cutting nippers 1000 V

Half-round extra-long nose pliers with straight jaws - 1000 V

L mm

087 EX

0x75 1x100 2x125 3x150

a mm

Cod. code

a Q.tà x conf.

€

17 U00870107D 1 20 U00870108D 1

091

ISO 2380 EN 60900

Screwdrivers for slot-head screws 1000 V

115 CP

- Silicon, Manganese and Molybdenum steel blade with phosphatized finish - Insulated ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle to identify the different shapes - Each screwdriver is tested according to the European standard EN 60900 to guarantee safe working - IMQ Certification axbxc mm

0,4x2,5x75 0,5x3x75 0,6x3,5x100 0,8x4x100 1x5,5x125 1,2x6,5x150

L mm

169 179 204 209 234 270

Cod. code

a Q.tà x conf.

U00910004D 1 U00910005D 1 U00910008D 1 U00910009D 1 U00910011D 1 U00910013D 1

€

Curved pliers with extra-long half-round jaws

- Body curved with respect to the axis of the handle for a more comfortable front grip - Greater visibility to the task in hand - Knurled gripping surface: length 32 mm - Shaped jaws for perfect gripping even on round surfaces - Integrated cutter for hard wire - Box-joint with internal spring - Ergonomic handles sheathed in anti-slip material

L mm

a mm

b mm

c mm

Cod. code

a Q.tà x conf.

170 127 73 120 275 U01150024D 1

€

133 AX

127 N

UNI 7914 DIN 5256

Half-round extra-long nose pliers with straight jaws

Pliers with straight nose for internal circlips - Precision model - Spring steel tips inserted into the nose: longer life compared to the standard tips - Support surface of the rings between the tips and the nose - Spring integrated in the body - Handles sheathed in anti-slip PVC - Protective enamelled finish capacity mm

L mm

12÷25 19÷60

140 185

Cod. code

a Q.tà x conf.

€

U01270003D 5 U01270004D 5

127 PN

128 PN

UNI 7915 DIN 5254

Pliers with nose bent at 90° for external circlips - Precision model - Piano wire tips inserted into the nose: longer life compared to the standard tips - Support surface of the rings between the tips and the nose - Spring integrated in the body - Handles sheathed in anti-slip PVC - Protective enamelled finish capacity mm

L mm

10÷25 19÷60

140 180

Cod. code

a Q.tà x conf.

L mm

12÷25 19÷60

130 175

Cod. code

a Q.tà x conf.

€

U01270023D 5 U01270024D 5

128 N

1600 N/mm2

L mm

ø max mm

160

Cod. code

a Q.tà x conf.

€

U01330150D 1

1,6

U01280023D 5 U01280024D 5

133 AXP

Pliers with nose bent at 90° for internal circlips

capacity mm

- Suitable for gripping and cutting operations in precision engineering - Pointed nose with knurled gripping surface - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish

€

UNI 7914 DIN 5256

- Precision model - Piano wire tips inserted into the nose: longer life compared to the standard tips - Support surface of the rings between the tips and the nose - Spring integrated in the body - Handles sheathed in anti-slip PVC - Protective enamelled finish

ISO 5745

Half-round extra-long nose pliers with jaws at 45° - Suitable for gripping and cutting operations in precision engineering - Pointed nose with knurled gripping surface - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish

131 AX Flat extra-long nose pliers with straight jaws - Knurled gripping surface - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish L mm

a mm

160

Cod. code

a Q.tà x conf.

€

1600 N/mm2

L mm

160 1,6 200 1,6

U01310150D 1

a mm

ø max mm

Cod. code

a Q.tà x conf.

€

44 U01330160D 1 71 U01330161D 1

UNI 7915 DIN 5254

Pliers with straight nose for external circlips - Precision model - Piano wire tips inserted into the nose: longer life compared to the standard tips - Support surface of the rings between the tips and the nose - Spring integrated in the body - Handles sheathed in anti-slip PVC - Protective enamelled finish capacity mm

L mm

10÷25 19÷60

140 180

New item

Cod. code

a Q.tà x conf.

U01280003D 5 U01280004D 5

€

131 AXP

134

Flat extra-long nose pliers with jaws at 45°

Lock-grip pliers with concave jaws

- Knurled gripping surface - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish L mm

a mm

160

Cod. code

a Q.tà x conf.

U01310160D 1

- Special Chrome Vanadium steel jaws - Pressed sheet steel body - Nickel plated finish

€

L mm

a mm

250

Cod. code

a Q.tà x conf.

€

U01340002D 5

363

160 Punch pliers - Revolving model with six interchangeable punches - Handles sheathed in PVC

135 B

ø punches mm

Lock-grip rack-type pliers with long jaws

Cod. code

2-2,5-3-3,5-4-4,5

a Q.tà x conf.

180 C €

U01600001D 1

a mm

c mm

250

110

Cod. code

a Q.tà x conf.

178 N

Wire strippers

160

Cod. code

a Q.tà x conf.

364

a Q.tà x conf.

€

L mm

a mm

180 250

30 44

Cod. code

a Q.tà x conf.

180 V

ISO 8976

Box-joint adjustable pliers - 7-position model - Special Chrome Vanadium steel body - Enamelled finish

€

U01780011D 1 U01780012D 1

L mm

a mm

250

Cod. code

a Q.tà x conf.

€

U01800015D 5

ISO 5746

180 B

- Nose with knurled inner surface to grip flat material - Knurled gripping area to hold round material - Additional induction hardening on cutting edges - Ideal to cut soft , semi-hard and hard wire - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish

160 1,8 180 2 200 2,2

Cod. code

U01800010D 5

Lay-on slip-joint adjustable pliers

€

Combination pliers

2100 N/mm2 ø max mm

U01470150D 1

150 AX

L mm

250

ISO 8976

- 8-position model - Handles sheated in PVC - Sandblasted enamelled finish - Steel body - Security block, fingers protected in every opening position

- For single-pole and multi-wire conductors with insulated thin wires - Screw for regulating stripping depth - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated a mm

a mm

€

UNI 7926

L mm

U01350510 1

147 AX

k max mm2

Box-joint adjustable pliers - 7-position model - Handles sheathed in PVC - Special Chrome Vanadium steel body - Enamelled finish

- Forged jaws - Toothing designed for a perfect grip even on round surfaces - Patented opening system integrated in the handles - Roller grip adjustment integrated in the handle - 5-positions rack L mm

ISO 8976

a mm

Cod. code

a Q.tà x conf.

33 U01500150D 5 36 U01500151D 5 42 U01500152D 5

ISO 8976

Semiautomatic adjustable pliers

€

a mm

250

Cod. code

a Q.tà x conf.

U01800031D 1

ISO 5748

End cutting nippers - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Fulcrum closer to the cutting edge to reduce effort during cutting operations - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish

- Integrated regulation button - 12-position model - Quick and precise rack - Box-joint system - Self-locking - High frequency treatment of the jaws - Steel body totally forged - Burnished with protective enamelled finish - Ergonomic handles studied to apply extreme force L mm

182 AX

€

L mm

2000 N/mm2 ø max mm

160 2 200 2,5

a mm

7 7

Cod. code

a Q.tà x conf.

U01820151D 5 U01820152D 5

€

IP51

PROTEZIONE DA POLVERE E ACQUA

237 A 1/2”

ISO 3315

Reversible ratchet with sealed mechanism (certified IP51)

185 AX

ISO 5749

Diagonal cutting nippers - Lengthened and pointed head - Clean and precise cut even on the extremities of cutting edges - Additional induction hardening on cutting edges - Ideal to cut soft, semi-hard and hard wire - Fulcrum closer to the cutting edge to reduce effort during cutting operations - Open hinge with forged joint - Ergonomic bimaterial grip - Hanging holes at the ends for safety lock systems - Chrome plated finish 2200 N/mm2 ø max mm

L mm

a mm

140 1,4 160 1,6

Cod. code

a Q.tà x conf.

€

17 U01850151D 5 20 U01850152D 5

199

ISO 9242

Pincers for cement layers - Carbon steel - Phosphatized finish L mm

a mm

190 225

15 17

Cod. code

a Q.tà x conf.

235 1/2” EN

ISO 2725-1

Hexagonal sockets - Special Chrome Molybdenum steel - Chrome plated finish W

b mm

L mm

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

13,1 13,8 15,3 16,5 17,8 18,9 20,2 21,4 22,6 24,1 25,4 26,6 27,4 29,1 30,4 31,6 32,7 34,1 35,4 36,6 37,9 38,7 40,4 42,5

36 36 36 36 36 36 36 36 36 36 36 36 36 38 38 38 38 38 38 44 44 44 44 44

Cod. code

a Q.tà x conf.

- Model with 72 teeth and angle of action of 5° - Knob-turn reversal system - Sealed mechanism certified IP51 - Higher resistance in comparison to standard ratchets, because of the new patented pawl - Forged steel body with double T section: lightness and resistance - Conical bimaterial handle for safe and perfect grip - Handle with hole for hanging on tool-holding panels - Chrome plated finish L mm

b mm

260

38,4

€

U02352103D 5 U02352104D 5 U02352105D 5 U02352106D 5 U02352107D 5 U02352108D 5 U02352109D 5 U02352110D 5 U02352111D 5 U02352112D 5 U02352113D 5 U02352114D 5 U02352115D 5 U02352116D 5 U02352117D 5 U02352118D 5 U02352119D 5 U02352120D 5 U02352121D 5 U02352122D 5 U02352123D 5 U02352124D 5 U02352125D 5 U02352127D 5

Cod. code

a Q.tà x conf.

€

U02370106D 1

276 CE

UNI 6743 ISO 691

T-handle wrenches with jointed hexagonal socket - Universal joint model with friction-spring to allow presetting of the socket at the desired angle - Removable sliding bar W

a mm

€

7 8 10 12 13 14 16 17

U01990010D 5 U01990015D 5

201

10,7 12 14,6 17 18,7 20,7 22,2 23,4

L mm

398 398 431 434 466 466 499 499

Cod. code

a Q.tà x conf.

€

U02760401D 1 U02760402D 1 U02760404D 1 U02760406D 1 U02760407D 1 U02760408D 1 U02760410D 1 U02760411D 1

Hacksaw frame - Light model for 150 mm blades - Steel bow - Supplied with Super Rapid steel blade (32 teeth per inch)

blade

150

”

L mm

237

Cod. code

a Q.tà x conf.

IP51

€

PROTEZIONE DA POLVERE E ACQUA

U02010001D 10

237 A 1/4”

ISO 3315

Reversible ratchet with sealed mechanism (certified IP51) - Model with 72 teeth and angle of action of 5° - Knob-turn reversal system - Sealed mechanism certified IP51 - Higher resistance in comparison to standard ratchets, because of the new patented pawl - Forged steel body with double T section: lightness and resistance - Conical bimaterial handle for safe and perfect grip - Handle with hole for hanging on tool-holding panels - Chrome plated finish

204 Shears for sheet steel - American model with wide straight blades a L mm mm

400 N/mm2 600 N/mm2 max mm

200 48 1 250 58 1,2 300 75 1,5

max mm

0,7 0,8 1

Cod. code

a Q.tà x conf.

U02040002D 1 U02040004D 1 U02040006D 1

€ L mm

b mm

120

24,3

Cod. code

a Q.tà x conf.

U02370102D 1

€

278 N

ISO 11168

T-handle spark plug wrenches with jointed socket - Hexagonal opening - Rubber gasket for retaining the spark plug - Removable sliding bar mm

a mm

L mm

16 18 19

22 25 25

270 270 270

Cod. code

a Q.tà x conf.

€

U02780011D 1 U02780013D 1 U02780014D 1

365

285 KA

ISO 691

Reversible ratchet combination wrenches with locking ring

280 T

ISO 2936

T-handle hexagon keys - For hex socket screws - Special Chrome Vanadium steel - Chrome plated finish with burnished tips up to size 8 mm to ensure precision and perfect fit with the screw

a mm

L mm

2 3 4 5 6

62 75 90 105 105

125 150 180 210 210

22 26 63 100 145

Cod. code

a Q.tà x conf.

€

U02800130D 1 U02800132D 1 U02800134D 1 U02800136D 1 U02800137D 1

284 Double ended offset bihexagonal ring wrench for scaffolds W

L mm

21x22

315

Cod. code

L mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19 22 24

128 140 140 149 158 165 171 178 190 199 208 225 236 247 287 320

Cod. code

a Q.tà x conf.

€

- Thin open end angled at 15° - Ergonomic grip - Bihexagonal head bent at 15°

115 122 133 138 145 155 162 170 180 185 195 202 208 216 224 233 248 257 267 274 285 295 305 320 340 355 390 430 440

4,0 4,1 4,6 4,6 5,1 5,2 5,4 5,7 5,9 6,1 6,6 6,6 7,4 7,4 7,5 8,3 8,6 8,9 8,9 9,8 9,8 9,8 9,8 10,5 10,5 11,0 11,0 11,5 12,8

366

UNI 6749 ISO 2236

Double ended offset tubular box wrenches

a mm

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 35 36

5 5,5 6 7 8 10 13

b mm

c mm

L mm

75 75 75 75 75 85 85

25 30 35 35 50 50 50

188 188 188 193 193 198 188

Cod. code

a Q.tà x conf.

€

U02980252D 1 U02980253D 1 U02980254D 1 U02980255D 1 U02980256D 1 U02980258D 1 U02980261D 1

ISO 2380

a Q.tà x conf.

U02850701D 1 U02850702D 1 U02850703D 1 U02850704D 1 U02850705D 1 U02850706D 1 U02850707D 1 U02850708D 1 U02850709D 1 U02850710D 1 U02850711D 1 U02850712D 1 U02850713D 1 U02850714D 1 U02850715D 1 U02850716D 1 U02850717D 1 U02850718D 1 U02850719D 1 U02850720D 1 U02850721D 1 U02850722D 1 U02850723D 1 U02850724D 1 U02850725D 1 U02850726D 1 U02850727D 1 U02850728D 1 U02850729D 1

€

5 24

L mm

8,8 95 33,7 180

Cod. code

a Q.tà x conf.

- Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes axbxc mm

- Light-duty wrenches with hexagonal openings, manufactured from a drawn tube - Transverse holes for drive bar 292

Cod. code

U02840101D 1

Combination wrenches

b mm

€

U02856006D 1 U02856007D 1 U02856008D 1 U02856009D 1 U02856010D 1 U02856011D 1 U02856012D 1 U02856013D 1 U02856014D 1 U02856015D 1 U02856016D 1 U02856017D 1 U02856018D 1 U02856019D 1 U02856022D 1 U02856024D 1

324

ISO 7738

L mm

- Ergonomic three-material grip with soft covering, resistant to oils and chemicals - Special Chrome Vanadium steel blade - Chrome plated finish

Screwdrivers for slot-head screws

285

a Q.tà x conf.

UNI 6750 ISO 2236

Hexagonal socket spinners with grip

- Steel ring integrated in the bihexagonal head for better grip - Open end with anti-slip system of the hexagon - Integrated inversion lever - Bihexagonal head and open end bent at 15° - Working angle of 5°

289 N

298

€

0,5x3x75 0,8x4x100 1x5,5x125 1x5,5x150 1,2x6,5x150 1,2x8x200

L mm

169 204 234 259 270 325

Cod. code

a Q.tà x conf.

U02890101D 1 U02890121D 1

324 D

ISO 2380

Screwdrivers for slot-head screws

294 AD

- For driving recessed studs or screws - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes

Adjustable wrenches with quick adjustment - Quick adjustment by pulling back the roll - Large capacity: opening +20% compared to the standard - Double graduated scale: millimetres and inches - Head angled at 22° - Steel roll - Hanging hole - Chrome plated finish s mm

a mm

150 - 6" 11,4 200 - 8" 14,2 250 - 10" 16,3

23 33 38

L mm

€

U03240401D 1 U03240403D 1 U03240407D 1 U03240408D 1 U03240410D 1 U03240411D 1

Cod. code

a Q.tà x conf.

U02940012D 1 U02940013D 1 U02940014D 1

axbxc mm

€

0,4x2,5x50 0,5x3x75 0,6x3,5x100 0,8x4x100 1x5,5x125 1,2x6,5x150

L mm

144 169 204 204 234 270

Cod. code

a Q.tà x conf.

U03240426D 1 U03240427D 1 U03240428D 1 U03240429D 1 U03240431D 1 U03240433D 1

€

324 EPH

ISO 8764

Screwdrivers for PHILLIPS screws ®

324 E

ISO 2380

Screwdrivers for slot-head screws - Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes axbxc mm

L mm

Cod. code

a Q.tà x conf.

- Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes W

L mm

3x150 275

n°xa

Cod. code

a Q.tà x conf.

€

U03240515D 1

Screwdrivers for PHILLIPS screws ISO 2380

Screwdrivers for slot-head screws - Model with long blade - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes

0,8x4x300 404

Cod. code

a Q.tà x conf.

€

ISO 8764

Screwdrivers for PHILLIPS screws ®

0x75 1x75 1x100 2x100 3x150

L mm

179 184 209 220 275

- Model with long blade - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes n°xa

1x250 2x250

L mm

359 370

Cod. code

a Q.tà x conf.

Cod. code

a Q.tà x conf.

U03240439D 1 U03240440D 1 U03240441D 1 U03240442D 1 U03240444D 1

€

Cod. code

a Q.tà x conf.

€

U03240463D 1 U03240464D 1 U03240465D 1

324 NPH

ISO 8764

Screwdrivers for PHILLIPS screws ®

- Stubby model - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes

€

U03240450D 1 U03240451D 1

U03240420D 1

324 PH

L mm

ISO 8764 ®

L mm

0,8x4x35 91 1x5,5x35 91 1,2x6,5x35 91

324 LPH

axbxc mm

ISO 2380

Screwdrivers for slot-head screws

axbxc mm

€

1,6x8x175 300 12 U03240508D 1 2x12x250 375 14 U03240510D 1

324 L

324 N

n°xa

L mm

1x35 2x35

91 91

Cod. code

a Q.tà x conf.

€

U03240468D 1 U03240469D 1

324 TX 324 PZ

ISO 8764

Screwdrivers for POZIDRIV®-SUPADRIV® screws - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes n°xa

0x75 1x75 2x100 3x150

L mm

179 184 220 275

Cod. code

a Q.tà x conf.

U03240456D 1 U03240457D 1 U03240458D 1 U03240459D 1

€

Screwdrivers for TORX® screws - Zinc-plated tip for high resistance to wear and corrosion - TORX® profile optimized to adapt perfectly to the screw and increase torque transmission - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes n°xa

T6x50 T7x50 T8x50 T9x75

L mm

145 145 145 170

Cod. code

a Q.tà x conf.

€

U03240471D 1 U03240472D 1 U03240473D 1 U03240474D 1

367

746

324 STX Screwdrivers for TORX Tamper Resistant screws ®

- For safety screws - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes L mm

n°xa

T10x75 T15x75 T20x100 T25x100 T27x100 T30x125 T40x150

Cod. code

179 184 220 220 220 245 275

Crimping pliers for non-insulated open and closed terminals

329 N

a Q.tà x conf.

€

U03240486D 1 U03240487D 1 U03240488D 1 U03240489D 1 U03240490D 1 U03240491D 1 U03240492D 1

- Model with screw-cutter, wire-cutter and wirestripper - PVC handgrip - Body in cut sheet steel

Screwdrivers for slot-head screws - Ergonomic handgrip with revolving head for precision screwing action - Special Silicon Chrome Vanadium steel blade - Chrome plated finish with burnished tip axbxc mm

L mm

colour

0,2x1,5x35 0,3x1,8x35 0,4x2,5x35

Cod. code

a Q.tà x conf.

L mm

k mm2

235

0,5÷1 1,5÷2,5 4÷6

Cod. code

a Q.tà x conf.

€

U07460001D 1

€

118 U03290001D 1 118 U03290002D 1 118 U03290005D 1

748 Crimping pliers for non-insulated open terminals

329 NPH Screwdrivers for PHILLIPS® screws

324 H

ISO 2380-1

Screwdrivers with beating zone for slothead screws

n°xa

- Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench - Metal rear dome to protect the beating zone - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes axbxc mm

L mm

1,2x6,5x150 270 10 1,6x10x175 300 12

Cod. code

a Q.tà x conf.

€

00x35

118

Cod. code

a Q.tà x conf.

ISO 8764-1

L mm

k mm2

Cod. code

a Q.tà x conf.

€

227 0,25÷0,5 0,5÷1,0 1,5÷2,5 4÷6 U07480001D 1

€

U03290021D 1

749 Crimping pliers for non-insulated closed terminals

329 NTX

- Jaws in microcast steel - Body in pressed sheet steel

Screwdrivers for TORX® screws

n°xa

324 HPH

L mm

colour

- Ergonomic handgrip with revolving head for precision screwing action - Special Silicon Chrome Vanadium steel blade - Chrome plated finish with burnished tip

U03240535D 1 U03240537D 1

- Jaws in microcast steel - Body in pressed sheet steel

- Ergonomic handgrip with revolving head for precision screwing action - Special Silicon Chrome Vanadium steel blade - Chrome plated finish with burnished tip

L mm

colour

T5x35 T6x35

118 118

code

L mm

k mm2

Cod. code

a Q.tà x conf.

€

227 0,1÷0,35 0,5÷1,0 1,5÷2,5 4÷6 10÷16 U07490001D 1

U03290041D 1 U03290042D 1

Screwdrivers with beating zone for PHILLIPS® screws - Model with hexagonal drive and hexagonal blade for powerful tightening, also with a wrench - Metal rear dome to protect the beating zone - Zinc-plated tip for high resistance to wear and corrosion - Chrome Silicon Vanadium steel blade for excellent resistance to flexion - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Colour code on the handle for quick identification of the different shapes a

L mm

2x125 245

n°xa

368

Cod. code

a Q.tà x conf.

U03240542D 1

€

751 Crimping pliers for pre-insulated terminals

345 Square tip drifts - Ergonomic three-material grip with soft coating, resistant to oils and chemicals - Steel blade with square section a mm

b mm

L mm

195

code

a Q.tà x conf.

U03450116D 1

- Rack model for progressive and calibrated crimping pressure, with automatic jaw opening at the end of tightening - PVC handgrips - Jaws in microcast steel - Sheet steel body L mm

k mm2

215 0,5÷1 1,5÷2,5 4÷6

Cod. code

a Q.tà x conf.

U07510002D 1

€