All-winches by Croft Supply and Distribution

ATV/UTV WINCHES PE4500

4,500 LB Capacity (2041 kg) PN: 76-50115

COMPACT PERFORMANCE

•INNOVATIVE CONTROLS •FULL LINEUP OF MODELS •LOW AMPERAGE DRAW •UNMATCHED VALUE

PE3.5

3,500 LB Capacity (1586 kg) PN: 76-50112

The Mile Marker ATV and UTV winch line combines the powerful recovery power of their full size brothers in a rugged compact size. These mini-monsters combine all metal, planetary gear systems for unmatched reliability in an ATV recovery system. The newest lineup of Mile Marker ATV winches features MiFi Technology™, the most innovative control system in the industry. This ground-breaking system launches variable speed technology from a Joystick Pendant and features high temperature and low voltage cut-offs for safety.

VMX2.5

2,500 LB Capacity (1134 kg) PN: 76-72105

ATV/UTV WINCHES V SERIES

PAGES 23-24

PAGES 25-28

ATV/UTV WINCHES

These trail rated winches offer the expedition grade strength and reliability of a high speed planetary gear system and all metal construction in a more traditional package. These bantam size work-horses will keep you out of trouble and on your way.

ATV/UTV WINCHES

Top of the line construction and performance. Featuring variable speed recovery with MiFi Technology™ solid state control system. Unmatched construction. Potent Power. Revolutionary Technology.

TOUGH SERIES

PAGE 21

PRODUCT CATALOG

PAGE 22

SUPREME PERFORMANCE ELE C T RI C W I NCH L I NE

featuring:

•OUR FASTEST ATV/UTV WINCHES EVER! •SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL •BOTH HANDHELD AND HANDLEBAR REMOTE INCLUDED!

Available Early 2009!

VMX3.5

VMX2.5

3,500 LB Capacity (1588 kg) PN: 76-72112

2,500 LB Capacity (1134 kg) PN: 76-72105

Mile Marker’s new, completely redesigned ATV/UTV winches provide premium performance in line speed and braking. The new platform will better accommodate mounting systems with its center focused drum, and with MiFi Technology, you can experience the precision and safety of variable speed control without any of the moving parts of traditional solenoids.

VMX3.5 PRODUCT SPECIFICATIONS: 76-72112

Dimensions (LxWxH)

•Potent Permanent Magnet Motor •Redesigned Braking Mechanism •Center Focused Drum •Automatic Load holding brake •Includes Roller Fairlead •Includes Both Illuminated Remote Control and Illuminated Handlebar Remote Control

VMX2.5 PRODUCT SPECIFICATIONS: Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-72105

13.0” X 4.18” X 4.3”

Dimensions (LxWxH)

13.0” X 4.18” X 4.3”

Cable

7/32” X 50’ (nominal 5,600 lbs, 2540 kg)

Cable

3/16” X 50’ (nominal 5600 lbs, 2540 kg)

Drum Size: Net weight

1.5” X 3.15” (38.1 mm X 80 mm) 25 lbs (11.3 Kgs) 4 Bolt Pattern, 4.03” X 3.35”,

Drum Size: Net weight

2” X 3.15” (50.8 mm X 80 mm) 24.2 lbs (11 Kgs) 4 Bolt Pattern, 4.03” X 3.35”,

3500 lbs (1588 kg) Single Line

3 Stage Planetary 153:1 Permanent Magnet, 2 hp (1.5kw), 12 V DC Infinite Speed Joystick Remote, 12’ (3.7 m) (330 mm X 106.2 mmX 109.2 mm) (5.45 mm X 45.2 m)

Bolt Pattern

(102.4 mm X 85 mm)

ATV/UTV WINCHES

3 Stage Planetary 241:1 Permanent Magnet, 2 hp (1.5kw), 12 V DC Infinite Speed Joystick Remote, 12’ (3.7 m) (330 mm X 106.2 mmX 109.2 mm) (4.8 mm X 15.2 m

Bolt Pattern

(102.4 mm X 85 mm)

VMX2.5 PERFORMANCE:

VMX3.5 PERFORMANCE:

PAGE 23

2500 lbs (1134 kg) Single Line

LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

amps @ 12 V

fpm

mpm

amps @ 12 V

5.8

6.4

500

227

16.2

4.9

500

227

6.1

1000

454

14.4

4.4

1000

454

17.1

5.2

1500

680

3.9

110

1500

680

4.6

143

2000

907

11.7

3.6

130

2000

907

13.3

4.1

165

2500

1134

10.8

3.3

140

2500

1134

3.7

194

3000

1360

10.2

3.1

152

3500

1588

9.8

2.9

160

PRODUCT CATALOG

ATV/UTV WINCHES

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

PRODUCT FEATURES:

PRODUCT CATALOG

PAGE 24

TOUGHSERIES

•OUR FASTEST ATV/UTV WINCHES EVER! •300 AMP RATED SOLENOID •REDESIGNED BRAKE SYSTEM •BOTH HANDHELD AND HANDLEBAR REMOTE INCLUDED!

ATV/UTV WINCH

•VERSATILE DESIGN •ILLUMINATED CONTROLS •REDESIGNED SOLENOID FOR LONGER DUTY CYCLE

Available Early 2009!

PE3.5

PE2.5

3,500 LB Capacity (1588 kg) PN: 77-50112

Mile Marker’s new lineup ATV and UTV winches have been totally redesigned and now boast top-of-the-line recovery speeds and a new braking system. These winches include both a handheld remote control, as well as a handlebar mounted remote control providing illuminated “power in” and “power out” functions. Mile Marker has also developed a new 300 amp rated solenoid giving maximum duty cycle to these bantam size power houses.

PE 3.5 PRODUCT SPECIFICATIONS:

The PE 4500 is a versatile, 4,500 LB Capacity utility recovery tool that serves (2041 KG) PN: 76-50115 large side by side units just as well as trailer duty. Mile Marker’s PE 4500 winch has been updated to include an improved solenoid design for extended duty cycle, an integrated kill switch, and illuminated controls.

PRODUCT FEATURES: •Fast Line Speeds •Redesigned Braking System •All Metal Planetary Gearing •Includes Both Handheld and Handlebar Controls •Illuminated Remote Controls •300 Amp Rated Solenoid •Center Focused Drum •Free Spooling •Roller Fairlead

PRODUCT FEATURES:

Illuminated Joystick Remote Control

PE 2.5 PRODUCT SPECIFICATIONS:

PRODUCT SPECIFICATIONS:

•1.9 HP Permanent Magnet Motor •Rugged Planetary Gear Sets •Illuminated Controls •Automatic Load Holding Brake •Galvanized Roller Fairlead •80 Feet Galvanized Aircraft Cable •FRP Sheathing on Power Cables •Integrated Kill Switch

77-50105

Permanent Magnet, 2 hp (1.5kw), 12 V DC Illuminated Joystick Remote, 12’ (3.7 m)

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

Dimensions (LxWxH)

13.0” X 4.1” X 4.2”

Dimensions (LxWxH)

13.0” X 4.18” X 4.3”

(330 mm X 106.2 mmX 109.2 mm)

LINE PULL

LINE SPEED MOTOR CURRENT

Cable

7/32” X 50’ (nominal 5,600 lbs, 2540 kg)

Cable

3/16” X 50’ (nominal 5600 lbs, 2540 kg)

fpm

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50251 3500 lbs (1588 kg) Single Line

3 Stage Planetary 153:1

(330 mm X 105 mmX 108 mm)

(5.45 mm X 45.2 m)

Drum Size: Net weight

1.5” X 3.15” (38.1 mm X 80 mm) 25 lbs (11.3 kg) 4 Bolt Pattern, 4.03” X 3.35”,

Bolt Pattern

(102.4 mm X 85 mm)

2500 lbs (1134 kg) Single Line

(4.8 mm X 15.2 m

2” X 3.15” (50.8 mm X 80 mm) 24.2 lbs (11 kg) 4 Bolt Pattern, 4.03” X 3.35”,

Bolt Pattern

(102.4 mm X 85 mm)

LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

amps @ 12 V

fpm

mpm

amps @ 12 V

5.8

6.4

500

227

16.2

4.9

500

227

6.1

1000

454

14.4

4.4

1000

454

17.1

5.2

1500

680

3.9

110

1500

680

4.6

143

2000

907

11.7

3.6

130

2000

907

13.3

4.1

165

2500

1134

10.8

3.3

140

2500

1134

3.7

194

3000

1360

10.2

3.1

152

3500

1588

9.8

2.9

160

PAGE 25

PRODUCT CATALOG

76-50115

Dimensions (LxWxH)

17.2” X 6.2” X 7.3”

Cable

1/4” X 80’’ (nominal 7,000 lbs, 3175 kg)

Drum Size: Net weight

2.5” X 5.5” (63.5 mm X 140 mm) 51 lbs (23 Kg) 4 Bolt Pattern, 4.5” X 10”,

Illuminated Joystick Remote Control

4500 lbs (2041 kg)

3 Stage Planetary 294:1 Permanent Magnet, 4.0 hp (3 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (3.7 m) (436 mm X 152 mmX 185 mm) (5.45 mm X 25.9 m)

(114.3 mm X 254 mm)

PERFORMANCE:

Permanent Magnet, 2 hp (1.5kw), 12 VDC Illuminated Joystick Remote, 12’ (3.7 m)

Drum Size: Net weight

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

Bolt Pattern

3 Stage Planetary 241:1

PE 2.5 PERFORMANCE:

PE 3.5 PERFORMANCE:

ATV/UTV WINCHES

PE4500

2,500 LB Capacity (1134 kg) PN: 77-50105

Illuminated Handlebar Remote Control

mpm 4.3

RATED LINE PULL CABLE CAPACITY

amps @ 12 V

Layer

lb.

meters

4500

2041

4.6

1500

380

6.6

3880

1760

31.5

9.6

2200

998

5.2

1.6

100

3420

1551

15.2

3000

1361

4.6

1.4

145

3050

1383

21.3

4500

2041

3.3

170

2750

1247

24.4

ATV/UTV WINCHES

TOUGHSERIES

ATV/UTV WINCH

PRODUCT CATALOG

PAGE 26

TOUGHSERIES

ATV/UTV WINCH

PE3500

PE2500

3,500 LB Capacity PN: 76-50110

2,500 LB Capacity PN: 76-50105

PRODUCT FEATURES:

•Potent Permanent Magnet Motor •Redesigned Braking Mechanism •Automatic Load holding brake •Includes Roller Fairlead •Includes Both Illuminated Remote Control and Illuminated Handlebar Remote Control

•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Includes Both Handlebar and Handheld Remote Controls

PE3500 PRODUCT SPECIFICATIONS:

PE2500 PRODUCT SPECIFICATIONS:

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50110*

Dimensions (LxWxH)

13.4” X 4.7” X 4.3”

76-50105*

Dimensions (LxWxH)

13” X 5” X 5”

Cable

3/16” X 50’ (nominal 5600 lbs)

23.4 lbs (10.6 kg)

Drum Size: Net weight

2” X 2.95” 24.2 lbs (11 kg)

1.89” X 3” (3 bolts or 2 bolts)

Bolt Pattern

3” X 4.87” (4 bolts)

3 Stage Planetary 262:1 Permanent Magnet, 2 hp (1.5 KW), 12 V

12’ (3.7 m) Handheld Remote (340 mm X 119 mm x 109 mm)

7/32” X 45’ aircraft cable (nominal strength = 5600 lbs, 2540 kg) 1.5” X 3.2” (Diameter X Length)

Bolt Pattern

2500 lbs (1134 kg)

3 Stage Planetary 153:1 Permanent Magnet, 1.6 hp (1.2 KW), 12 V 12’ (3.7 m) Handheld and Handlebar Included (330 mm X 127 mm x 127 mm) (4.8 mm X 15.2 m)

PE2500 PERFORMANCE:

PE3500 PERFORMANCE: LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

fpm

mpm

amps @ 12 V

Illuminated Handlebar Remote Control

amps @ 12 V

12.0

3.7

15.00

19.1

5.8

1000

454

9.2

2.8

40.00

500

227

15.3

4.7

31.00

2000

907

7.5

2.3

80.00

1000

454

12.8

3.9

62.00

3000

1361

1.5

120

1500

680

9.0

2.7

90.00

3500

1588

1.2

140

2000

907

6.4

115.00

2500

1134

4.5

1.4

150.00

ATV/UTV WINCHES

Drum Size: Net weight

Illuminated Joystick Remote Control

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

3500 lbs (1588 kg)

Cable

ATV/UTV WINCHES

•PROVEN DESIGN •RELIABLE RECOVERY, LOW AMP DRAW •ILLUMINATED REMOTE CONTROL

*These Models Are Available Only While Supplies Last.

PAGE 27

PRODUCT CATALOG

PAGE 28

ATV/UTV MOUNTING SYSTEMS

ATV/UTV MOUNTING SYSTEMS Application

ARCTIC CAT

ATV/UTV MOUNTS Mile Marker’s ATV Winch Mounts are constructed of heavy duty steel and are finished in a gloss black, baked-on powder coat to endure years of abuse. These mounts are designed to incorporate a Mile Marker winch system to your ATV with no change in the vehicle’s handling. Each of our bolt-on ATV Winch Mounts includes all necessary hardware and mounting instructions for efficient installation.

CAN-AM OUTLANDER (06) PN: 51-1110

51-1005 51-1005 51-1005 51-1010 51-1010 51-1010 51-1012 51-1015 51-1015 51-1015 51-1860 51-1860

Traxter Quest Outlander 330/400 Outlander 400 V-Twin 500/600/800 CUB CADET C466 20HP Kohler 4x4

99-05 02-05 03-06 07-08 06-08

51-1105 51-1105 51-1110 51-1112 51-1112

51-1822

Buck/Ext Trail Buck Gator XUV Gator HPX

04-05 04-05 07-08 04-06

51-1105 51-1105 51-1831 51-1831

Rubicon 500 Foreman 400/450 Rancher 350/400 Rancher 420 Rubicon 500 Rincon 650/680 Foreman 500 Foreman 500 S/ES/FPE Rubicon 500 TRX 300

01-04 95-04 00-07 07-08 05-06 03-07 05-06 07-08 07-08 93-00

51-1210 51-1215 51-1220 51-1225A 51-1230A 51-1230A 51-1230A 51-1235 51-1235A 51-1240

650 Prairie 400 Prairie 650 Brute Force 360 Prairie 300 Bayou 700 Prairie 750 Brute Force 650i Brute Force 750 Brute Force 610 Mule UTV Teryx RUV

02-04 97-02 05-08 02-08 89-03 04-06 05-07 06 2008 05-08 08

51-1305 51-1310 51-1315 51-1320 51-1330 51-1335 51-1340 51-1340 51-1341 51-1840 51-1842

900 RTV 4X4 1100 RTV 4X4

04-08 08

51-1812 51-1812

Magnum

95-98

51-1400

BOMBARDIER/CAN-AM

KAWASAKI

MOUNTING SYSTEMS

KUBOTA

POLARIS

PAGE 37

PRODUCT CATALOG

MM Part #

98-05 96-01 00-01 02-04 02-04 02 08 05-08 04-08 06-08 06-07 08

HONDA

PN: 51-1610

Year(s)

250/300 400/454 4x4/500 500 AUTO 300/375/400 400i/400 ACT/400 Auto 500i 366 400/500 650 700 650 H1 Prowler 700 Prowler

JOHN DEERE

YAMAHA GRIZZLY 660 (04)

APP CHART Application

Year(s)

MM Part #

6x6 Sportsman 400 Sportsman 500 Sportsman 600/700 Sportsman Explorer 330 Magnum 6x6 ATP 330/500 400 Sportsman 500 Sportsman 400/600/700/800 Sportsman 450 Sportsman 500 Sportsman 500 X2 500 X2 700 X2 800 X2 500 Sportsman Touring 800 Sportsman Touring Hawkee 300/400 Sportsman Ranger Ranger Crew 800 Razor

91-99 Pre 95 96-98 04 02-04 96-01 99-06 00-06 04-05 01-04 96-03 05-07 05-06 05-08 06 08 08 2007 08 08 06 08 04-08 08 08

51-1400 51-1400 51-1400 51-1407 51-1407 51-1410 51-1410 51-1410 51-1410 51-1410 51-1410 51-1420 51-1420 51-1420 51-1420 51-1420 51-1420 51-1420 51-1420 51-1420 51-1425 51-1425 51-1850 51-1850 51-1852

Eiger Vinson King Quad 400 LTF 300 King Quad LTF 300 King Quad King Quad 450 King Quad 700 King Quad 750

02-07 02-07 08 01-02 99-00 07-09 05-07 08

51-1505 51-1505 51-1510 51-1515 51-1520 51-1530 51-1530 51-1530

Grizzly 660 Grizzly 600 Bruin 350 Grizzly 350 Grizzly 450 Kodiak 400/450 Kodiak 400 Grizzly 700 Rhino 450 Rhino 660 Rhino 700 Big Bear 400 Big Bear 400i Big Bear 400 Wolverine 350 Wolverine 450 4x4

02-08 98-01 04-06 07-08 07-08 03-06 00-02 07-08 06-08 04-08 06-08 07 07-08 97-06 Thru 05 06

51-1605 51-1610 51-1615 51-1615 51-1615 51-1615 51-1620 51-1625 51-1635 51-1635 51-1635 51-1640 51-1640 51-1650 51-1655 51-1660

POLARIS cont’d

SUZUKI

YAMAHA

PRODUCT CATALOG

MOUNTING SYSTEMS

FRONT MOUNT RECEIVER

PAGE 38

ELECTRIC WINCHES VSX12

12,000 LB Capacity (5443 kg) PN: 76-72151

V-10

INNOVATION. POWER. VALUE.

PEC8

12,000 LB Capacity (5443 kg) PN: 77-52148

The Mile Marker Electric Winch Line offers the more traditional off-road enthusiast an electric alternative to our Hydraulic System. These winches have been tested to the extreme and will undeniably prove to be the most necessary accessory to your off-road vehicle. Mile Marker electric winches offer superior pulling strength while maintaining a low electric current. From the potency of a permanent magnet motor to the durability of a series wound motor, Mile Marker has an electric recovery tool to handle every job imaginable. All Electric Winch systems now include FRP (Fiberglass Reinforced Polymer) Sheaths on all cable connections for added heat and abrasion resistance. Mile Marker has also expanded its development of solid state control and variable speed line retrieval with MiFi Technology™, the most innovative recovery control in the world. By eliminating the electro-mechanical solenoid and utilizing M.O.S.F.E.T. drivers, MiFi Technology™ is the safest and most reliable recovery system available today.

8,000 LB Capacity (3629 kg) PN: 77-50140

Variable Speed Remote Control

•INNOVATIVE CONTROLS •FULL LINEUP OF MODELS •LOW AMPERAGE DRAW •RUGGED •RELIABLE •UNMATCHED VALUE

ELECTRIC WINCHES V SERIES

PAGES 11-14

PAGES 15-16

PAGES 17-20

The original electric recovery systems that started it all. These recovery systems offer efficient, potent pulling power in ranges from 8,000 to 12,000 pounds, with a variety of motor and mounting combinations available.

ELECTRIC WINCHES

These winches combine revolutionary technology in control and user feedback with expedition proven recovery power. Together, it is the most complete self-recovery system available today.

TOUGH SERIES

ELECTRIC WINCHES

The newest addition to the Mile Marker Line Up, these winches feature the ultimate in performance, construction, and technology. When you demand the best, look no further.

X SERIES

PAGE 9

PRODUCT CATALOG

PAGE 10

SUPREME PERFORMANCE ELE C T RI C W I NCH L I NE

•FASTEST WINCH IN ITS CLASS! •SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL •IP67 WATERPROOF Variable Speed Remote Control

PN: 77-52151

featuring:

12,000 Pound Capacity

Mile Marker unleashes their best performing, most innovative winches to date: the V-Series electric winches. Featuring ground-breaking Solid-State controls (NO SOLENOIDS!), Variable Speed Line Control, Waterproof Sealing, and blazing line speeds, this winch line will prove to be the ultimate winch on the market. A durable, dual-compound black polyurethane coating and stainless steel hardware put the finishing touches on this 12,000 pound winch that is built to handle anything you can throw at it. If you are looking for the winch with awesome looks, and unmatched performance, look no further.

PRODUCT FEATURES:

PRODUCT SPECIFICATIONS:

•Variable Speed Controls •Solid State Electronics •IP67 Waterproof •Powerful 6.5HP Series Wound Motors •Waterproof Controls and Winch •Rugged Planetary Gear Sets •Illuminated Controls •Diagnostic Feedback •Automatic Load Holding Brake •Galvanized Roller Fairlead •Heavy Duty Polyurethane Finish •100 Feet Galvanized Aircraft Cable

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

77-52151

Dimensions (LxWxH)

23.30” X 6.63” X 8.83”

Cable

3/8” X 100’

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 102 lbs (46.3 Kg) 4 Bolt Pattern, 4.5” X 10”,

12,000 lbs. (5443 kg)

3 Stage Planetary 212:1 6.5 HP series wound (4.9 KW) 12V DC Infinite Speed Joystick Remote, 12’ (3.7m) (591.82mm X 168.4 mm X 224.3 mm) (nominal 14,400 lbs, 6531 kg)

(9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

PERFORMANCE: LINE SPEED MOTOR CURRENT fpm

mpm

RATED LINE PULL CABLE CAPACITY

amps @ 12 V

Layer

lb.

meters

12000

5443

5.18

6.4

2000

907

4.3

144

9600

4354

11.28

195

8100

3674

18.9

4000

ELECTRIC WINCHES

1814

10.4

3.2

6000

2722

8.5

2.6

240

7000

3175

28.04

8000

3629

7.4

2.3

300

6000

2722

100

30.48

10000

4536

6.6

2.0

334

12000

5443

6.1

1.9

380

PAGE 11

PRODUCT CATALOG

ELECTRIC WINCHES

LINE PULL lb

PRODUCT CATALOG

PAGE 12

SUPREME PERFORMANCE ELE C T RI C W I NCH L I NE

•OUR FASTEST WINCH EVER! •SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL •IP67 WATERPROOF Variable Speed Remote Control

PN: 77-52148

featuring:

10,000 Pound Capacity

Mile Marker unleashes their best performing, most innovative winches to date: the V-Series electric winches. Featuring ground-breaking Solid-State controls (NO SOLENOIDS!), Variable Speed Line Control, Waterproof Sealing, and blazing line speeds, this winch line will prove to be the ultimate winch on the market. A durable, dual-compound black polyurethane coating and stainless steel hardware put the finishing touches on this 10,000 pound winch that is built to handle anything you can throw at it. If you are looking for the winch with awesome looks, and unmatched performance, look no further.

PRODUCT FEATURES:

PRODUCT SPECIFICATIONS:

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

77-52148

Dimensions (LxWxH)

23.30” X 6.63” X 8.83”

Cable

3/8” X 100’ (nominal 14,400 lbs, 6531 kg)

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 102 lbs (46.3 Kg) 4 Bolt Pattern, 4.5” X 10”,

10,000 lbs. (4536 kg)

3 Stage Planetary 130:1 6.5 HP series wound (4.9 KW) 12V DC Infinite Speed Joystick Remote, 12’ (3.7m) (591.82mm X 168.4 mm X 224.3 mm) (9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

PERFORMANCE: LINE PULL

LINE SPEED MOTOR CURRENT

RATED LINE PULL CABLE CAPACITY

fpm

mpm

amps @ 12 V

Layer

lbs.

meters

38.5

11.7

10000

4536

5.18

2000

907

18.5

5.6

150

8000

3629

11.28

4000

1814

4.6

210

6800

3084

18.9

6000

2722

11.5

3.5

265

6000

2722

28.04

8000

3629

9.6

2.9

325

5200

2359

100

30.48

10000

4536

8.1

2.5

385

ELECTRIC WINCHES

lbs.

PAGE 13

PRODUCT CATALOG

PAGE 14

X-SERIES

featuring:

VSX12

featuring:

VSX9.5

12,000 LB Capacity (5443 kg) PN: 76-72151

VMX8

9,500 LB Capacity (4309 kg) PN: 76-72146

8,000 LB Capacity (3629 kg) PN: 76-72140

•MOST POPULAR PLATFORM •UPDATED DESIGN •SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL

Variable Speed Remote Control

PRODUCT FEATURES: •Variable Speed Controls •Solid State Electronics •Powerful Series Wound Motors •FRP Sheathing on Power Cables •Rugged Planetary Gear Sets •Illuminated Controls •Diagnostic Feedback •Automatic Load holding Brake •Galvanized Roller Fairlead •100 Feet Galvanized Aircraft Cable

By outfitting one of the most successful platforms in the lineup with the revolutionary MiFi Technology control system, Mile Marker is able to fuse innovation with proven performance. The VSX 9.5 (9,500 Pound) and VSX 12 (12,000 Pound) winches offer a hi-tech, feature packed addition to one of the industries favorite winch lines.

VSX 12 PRODUCT SPECIFICATIONS: Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-72151

Dimensions (LxWxH)

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-72146

22.25” X 6.25” X 8.00”

Dimensions (LxWxH)

22.25” X 6.25” X 8.00”

Cable

3/8” X 100’ (nominal 14,400 lbs, 6531 kg)

Cable

3/8” X 100’

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 Kgs) 4 Bolt Pattern, 4.5” X 10”,

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 kg) 4 Bolt Pattern, 4.5” X 10”,

12000 lbs (5443 kg)

3 Stage Planetary 296:1 Series Wound, 4.8 hp (3.6 KW), 12 / 24 V 6 pt (565.2 mm X 158.8 mmX 203.2 mm)

(9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

VSX 12 PERFORMANCE: LINE PULL lbs.

ELECTRIC WINCHES

VSX 9.5 PRODUCT SPECIFICATIONS:

kgs.

mpm

3 Stage Planetary 212:1 Infinite Speed Joystick Remote, 12’ (3.7 m) (565.2 mm X 158.8 mmX 203.2 mm) (nominal 14,400 lbs, 6531 kg)

(9.53 mm X 30.5 m)

Bolt Pattern

amps @ 12 V

LINE PULL lbs.

(114.3 mm X 254 mm)

LINE SPEED MOTOR CURRENT

kgs.

fpm

mpm

25.7

7.8

907

12.8

3.9

145

2000

907

15.1

4.6

150

4000

1814

9.7

3.0

185

4000

1814

10.5

3.2

210

6000

2722

7.9

2.4

230

6000

2722

7.9

2.4

270

8000

3629

7.1

2.2

270

8000

3629

5.9

1.8

320

9500

4309

4.3

1.3

375

4536

5.1

1.6

315

12000

5443

4.5

1.4

370

PAGE 15

PRODUCT CATALOG

PRODUCT SPECIFICATIONS:

•Variable Speed Controls •Solid State Electronics •4 HP Permanent Magnet Motor •Rugged Planetary Gear Sets •Illuminated Controls •Diagnostic Feedback •Automatic Load Holding Brake •Galvanized Roller Fairlead •Heavy Duty Polyurethane Finish •100 Feet Galvanized Aircraft Cable

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-72140

Dimensions (LxWxH)

21.50” X 6.25” X 8.00”

Cable

5/16” X 100’ (nominal 9,800 lbs)

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 81 lbs (37 Kg) 4 Bolt Pattern, 4.5” X 10”,

8000 lbs (3629 Kg)

3 Stage Planetary 212:1 Permanent Magnet, 4.0 hp (3 KW), 12 / 24 V Infinite Speed Joystick Remote, 12’ (3.7 m) (546.1 mm X 158.8 mmX 203.2 mm) (7.94 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

PERFORMANCE: LINE PULL

LINE SPEED MOTOR CURRENT

fpm

kg 0

mpm 4

RATED LINE PULL CABLE CAPACITY

amps @ 12 V

Layer

lb.

8000

3629

meters 5.49

6335

2874

12.19

2000

907

3.4

4000

1814

2.7

160

5243

2378

20.12

4473

2029

29.26

3900

1769

100

30.48

6000

2722

1.8

230

8000

3629

1.5

290

amps @ 12 V

2000

10000

PRODUCT FEATURES:

Series Wound, 4.6 hp (3.4 KW), 12 / 24 V

VSX 9.5 PERFORMANCE:

LINE SPEED MOTOR CURRENT fpm

9500 lbs (4309 kg)

Variable Speed Remote Control

A favorite in Jeep and Mid Size Off-Road Circles, Mile Marker’s 8,000 pound winch has been updated to include a new clutch design and more clearance under the tie-bars. Outfitted with Mile Marker’s Revolutionary MiFi Technology control system, the VMX 8 will be ready to take on challenges that would send traditionally controlled units begging for mercy.

ELECTRIC WINCHES

•PROVEN WINCH DESIGN •INNOVATIVE SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL

PRODUCT CATALOG

PAGE 16

SEC12

SEC12 PRODUCT SPECIFICATIONS: Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50251

Dimensions (LxWxH)

SEC 9.5 PRODUCT SPECIFICATIONS:

22.25” X 6.25” X 8.00”

Dimensions (LxWxH)

22.25” X 6.25” X 8.00”

Cable

3/8” X 100’

Cable

3/8” X 100’ (nominal 14,400 lbs, 6531 kg)

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 Kg) 4 Bolt Pattern, 4.5” X 10”,

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 Kg) 4 Bolt Pattern, 4.5” X 10”,

3 Stage Planetary 296:1 Series Wound, 4.8 hp (3.6 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (3.7 m) (565.2 mm X 158.8 mmX 203.2 mm) (nominal 14,400 lbs, 6531 kg)

(9.53 mm X 30.5 m)

(114.3 mm X 254 mm)

Illuminated Joystick Remote, 12’ (3.7 m) (565.2 mm X 158.8 mm X 203.2 mm) (9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

kg.

fpm

amps @ 12 V

mpm

25.7

7.8

907

12.8

3.9

145

2000

907

15.1

4.6

150

4000

1814

9.7

3.0

185

4000

1814

10.5

3.2

210

6000

2722

7.9

2.4

230

6000

2722

7.9

2.4

270

8000

3629

7.1

2.2

270

8000

3629

5.9

1.8

320

9500

4309

4.3

1.3

375

4536

5.1

1.6

315

12000

5443

4.5

1.4

370

PAGE 17

PRODUCT CATALOG

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

77-50140

Dimensions (LxWxH)

21.50” X 6.25” X 8.00”

Cable

5/16” X 100’ (nominal 9,800 lbs, 4445 kg)

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 81 lbs (37 kg) 4 Bolt Pattern, 4.5” X 10”,

Illuminated Joystick Remote Control

8000 lbs (3629 Kg)

3 Stage Planetary 212:1 Permanent Magnet, 4.0 hp (3 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (3.7 m) (546.1 mm X 158.8 mm X 203.2 mm) (7.94 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

PERFORMANCE: LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

RATED LINE PULL CABLE CAPACITY

amps @ 12 V

Layer

lb.

meters

8000

3629

5.49

2000

907

3.4

6335

2874

12.19

4000

1814

2.7

160

5243

2378

20.12

6000

2722

1.8

230

4473

2029

29.26

8000

3629

1.5

290

3900

1769

100

30.48

amps @ 12 V

2000

10000

•4 HP Permanent Magnet Motor •Rugged Planetary Gear Sets •Illuminated Controls •Automatic Load Holding Brake •Galvanized Roller Fairlead •100 Feet Galvanized Aircraft Cable •FRP Sheathing On Power Cables •Integrated Kill Switch

Series Wound, 4.6 hp (3.4 KW), 12 / 24 V

LINE PULL

mpm

Illuminated Joystick Remote Control

PRODUCT SPECIFICATIONS:

3 Stage Planetary 212:1

PRODUCT FEATURES:

9500 lbs (4309 Kgs)

SEC 9.5 PERFORMANCE:

SEC 12 PERFORMANCE:

ELECTRIC WINCHES

•Powerful Series Wound Motors •FRP Sheathing on Power Cables •Rugged Planetary Gear Sets •Illuminated Controls •Automatic Load Holding Brake •Galvanized Roller Fairlead •100 Feet Galvanized Aircraft Cable •Integrated Kill Switch

76-50246

12000 lbs (5443 Kgs)

A favorite in Jeep and Mid Size Off-Road Circles, Mile Marker’s 8,000 pound winch has been updated to include a new clutch design and more clearance under the tie-bars. With illuminated controls, sealed solenoids, and an integrated kill switch, the PEC series is a proven winch design at an unmatched value.

PRODUCT FEATURES:

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

Bolt Pattern

8,000 LB Capacity (3629 kg) PN: 77-50140

9,500 LB Capacity PN: 76-50246

Heavy Duty Series Wound Motors and rugged planetary gear sets are the backbone of this expedition grade winch series. With illuminated controls, sealed solenoids, and an integrated kill switch, the SEC series is a proven winch design at an unmatched value.

•MOST POPULAR PLATFORM •UPDATED DESIGN •ILLUMINATED CONTROLS •REDESIGNED SOLENOID FOR LONGER DUTY CYCLE

PEC8

SEC9.5

12,000 LB Capacity PN: 76-50251

TOUGHSERIES

ELECTRIC WINCH

ELECTRIC WINCHES

TOUGHSERIES

•PROVEN WINCH DESIGN •ILLUMINATED CONTROLS •POWERFUL SERIES WOUND MOTORS •AUTOMATIC LOAD HOLDING BRAKE

ELECTRIC WINCH

PRODUCT CATALOG

PAGE 18

TOUGHSERIES

•FINISHED LOOK •EASY INSTALLATION •POWERFUL SERIES WOUND MOTOR •AUTOMATIC LOAD HOLDING BRAKE

INTEGRATED SOLENOID

SI12000 12,000 LB Capacity PN: 76-50152

PRODUCT FEATURES:

Heavy Duty Series Wound Motors and rugged planetary gear sets are the backbone of this expedition grade winch series. The SI Series offers a one piece winch and solenoid combination for a finished look and simplified installation.

SI 12000 PRODUCT SPECIFICATIONS: 76-50152

Dimensions (LxWxH)

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50147

22.25” X 6.25” X 8.00”

Dimensions (LxWxH)

22.25” X 6.25” X 8.00”

Cable

3/8” X 100’ (nominal 14,400 lbs, 6531 kg)

Cable

3/8” X 100’ (nominal 14,400 lbs, 6531 kg)

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 kg) 4 Bolt Pattern, 4.5” X 10”,

Drum Size: Net weight

2.5” X 9” (63.5 mm X 228.6 mm) 92 lbs (42 kg) 4 Bolt Pattern, 4.5” X 10”,

12000 lbs (5443 kg)

3 Stage Planetary 296:1 Series Wound, 4.8 hp (3.6 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (565.2 mm X 158.8 mm X 203.2 mm)

(9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

SI 12000 PERFORMANCE:

ELECTRIC WINCHES

SI 9500 PRODUCT SPECIFICATIONS: 9500 lbs (4309 kg)

3 Stage Planetary 212:1 Series Wound, 4.6 hp (3.4 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (565.2 mm X 158.8 mm X 203.2 mm) (9.53 mm X 30.5 m)

Bolt Pattern

(114.3 mm X 254 mm)

SI 9500 PERFORMANCE:

LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

fpm

mpm

amps @ 12 V

fpm

mpm

amps @ 12 V

25.7

7.8

2000

907

12.8

3.9

145

2000

907

15.1

4.6

150

4000

1814

9.7

3.0

185

4000

1814

10.5

3.2

210

6000

2722

7.9

2.4

230

6000

2722

7.9

2.4

270

LINE SPEED MOTOR CURRENT

8000

3629

7.1

2.2

270

8000

3629

5.9

1.8

320

10000

4536

5.1

1.6

315

9500

4309

4.3

1.3

375

12000

5443

4.5

1.4

370

PAGE 19

PRODUCT CATALOG

Illuminated Joystick Remote Control

ELECTRIC WINCHES

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

SI9500

•Powerful Series Wound Motor •Rugged Planetary Gear Sets 9,500 LB Capacity •Integrated Solenoid Housing PN: 76-50147 •Automatic Load Holding Brake •Galvanized Roller Fairlead •100 Feet Galvanized Aircraft able •Illuminated Remote Control

PRODUCT CATALOG

PAGE 20

ATV/UTV WINCHES PE4500

4,500 LB Capacity (2041 kg) PN: 76-50115

COMPACT PERFORMANCE

•INNOVATIVE CONTROLS •FULL LINEUP OF MODELS •LOW AMPERAGE DRAW •UNMATCHED VALUE

PE3.5

3,500 LB Capacity (1586 kg) PN: 76-50112

VMX2.5

2,500 LB Capacity (1134 kg) PN: 76-72105

ATV/UTV WINCHES V SERIES

PAGES 23-24

PAGES 25-28

ATV/UTV WINCHES

Top of the line construction and performance. Featuring variable speed recovery with MiFi Technology™ solid state control system. Unmatched construction. Potent Power. Revolutionary Technology.

TOUGH SERIES

PAGE 21

PRODUCT CATALOG

PAGE 22

SUPREME PERFORMANCE ELE C T RI C W I NCH L I NE

featuring:

•OUR FASTEST ATV/UTV WINCHES EVER! •SOLID STATE ELECTRONICS •VARIABLE SPEED LINE CONTROL •BOTH HANDHELD AND HANDLEBAR REMOTE INCLUDED!

Available Early 2009!

VMX3.5

VMX2.5

3,500 LB Capacity (1588 kg) PN: 76-72112

2,500 LB Capacity (1134 kg) PN: 76-72105

VMX3.5 PRODUCT SPECIFICATIONS: 76-72112

Dimensions (LxWxH)

VMX2.5 PRODUCT SPECIFICATIONS: Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-72105

13.0” X 4.18” X 4.3”

Dimensions (LxWxH)

13.0” X 4.18” X 4.3”

Cable

7/32” X 50’ (nominal 5,600 lbs, 2540 kg)

Cable

3/16” X 50’ (nominal 5600 lbs, 2540 kg)

Drum Size: Net weight

1.5” X 3.15” (38.1 mm X 80 mm) 25 lbs (11.3 Kgs) 4 Bolt Pattern, 4.03” X 3.35”,

Drum Size: Net weight

2” X 3.15” (50.8 mm X 80 mm) 24.2 lbs (11 Kgs) 4 Bolt Pattern, 4.03” X 3.35”,

3500 lbs (1588 kg) Single Line

3 Stage Planetary 153:1 Permanent Magnet, 2 hp (1.5kw), 12 V DC Infinite Speed Joystick Remote, 12’ (3.7 m) (330 mm X 106.2 mmX 109.2 mm) (5.45 mm X 45.2 m)

Bolt Pattern

(102.4 mm X 85 mm)

ATV/UTV WINCHES

3 Stage Planetary 241:1 Permanent Magnet, 2 hp (1.5kw), 12 V DC Infinite Speed Joystick Remote, 12’ (3.7 m) (330 mm X 106.2 mmX 109.2 mm) (4.8 mm X 15.2 m

Bolt Pattern

(102.4 mm X 85 mm)

VMX2.5 PERFORMANCE:

VMX3.5 PERFORMANCE:

PAGE 23

2500 lbs (1134 kg) Single Line

LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

amps @ 12 V

fpm

mpm

amps @ 12 V

5.8

6.4

500

227

16.2

4.9

500

227

6.1

1000

454

14.4

4.4

1000

454

17.1

5.2

1500

680

3.9

110

1500

680

4.6

143

2000

907

11.7

3.6

130

2000

907

13.3

4.1

165

2500

1134

10.8

3.3

140

2500

1134

3.7

194

3000

1360

10.2

3.1

152

3500

1588

9.8

2.9

160

PRODUCT CATALOG

ATV/UTV WINCHES

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

PRODUCT FEATURES:

PRODUCT CATALOG

PAGE 24

TOUGHSERIES

•OUR FASTEST ATV/UTV WINCHES EVER! •300 AMP RATED SOLENOID •REDESIGNED BRAKE SYSTEM •BOTH HANDHELD AND HANDLEBAR REMOTE INCLUDED!

ATV/UTV WINCH

•VERSATILE DESIGN •ILLUMINATED CONTROLS •REDESIGNED SOLENOID FOR LONGER DUTY CYCLE

Available Early 2009!

PE3.5

PE2.5

3,500 LB Capacity (1588 kg) PN: 77-50112

PE 3.5 PRODUCT SPECIFICATIONS:

PRODUCT FEATURES:

Illuminated Joystick Remote Control

PE 2.5 PRODUCT SPECIFICATIONS:

PRODUCT SPECIFICATIONS:

77-50105

Permanent Magnet, 2 hp (1.5kw), 12 V DC Illuminated Joystick Remote, 12’ (3.7 m)

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

Dimensions (LxWxH)

13.0” X 4.1” X 4.2”

Dimensions (LxWxH)

13.0” X 4.18” X 4.3”

(330 mm X 106.2 mmX 109.2 mm)

LINE PULL

LINE SPEED MOTOR CURRENT

Cable

7/32” X 50’ (nominal 5,600 lbs, 2540 kg)

Cable

3/16” X 50’ (nominal 5600 lbs, 2540 kg)

fpm

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50251 3500 lbs (1588 kg) Single Line

3 Stage Planetary 153:1

(330 mm X 105 mmX 108 mm)

(5.45 mm X 45.2 m)

Drum Size: Net weight

1.5” X 3.15” (38.1 mm X 80 mm) 25 lbs (11.3 kg) 4 Bolt Pattern, 4.03” X 3.35”,

Bolt Pattern

(102.4 mm X 85 mm)

2500 lbs (1134 kg) Single Line

(4.8 mm X 15.2 m

2” X 3.15” (50.8 mm X 80 mm) 24.2 lbs (11 kg) 4 Bolt Pattern, 4.03” X 3.35”,

Bolt Pattern

(102.4 mm X 85 mm)

LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

amps @ 12 V

fpm

mpm

amps @ 12 V

5.8

6.4

500

227

16.2

4.9

500

227

6.1

1000

454

14.4

4.4

1000

454

17.1

5.2

1500

680

3.9

110

1500

680

4.6

143

2000

907

11.7

3.6

130

2000

907

13.3

4.1

165

2500

1134

10.8

3.3

140

2500

1134

3.7

194

3000

1360

10.2

3.1

152

3500

1588

9.8

2.9

160

PAGE 25

PRODUCT CATALOG

76-50115

Dimensions (LxWxH)

17.2” X 6.2” X 7.3”

Cable

1/4” X 80’’ (nominal 7,000 lbs, 3175 kg)

Drum Size: Net weight

2.5” X 5.5” (63.5 mm X 140 mm) 51 lbs (23 Kg) 4 Bolt Pattern, 4.5” X 10”,

Illuminated Joystick Remote Control

4500 lbs (2041 kg)

3 Stage Planetary 294:1 Permanent Magnet, 4.0 hp (3 KW), 12 / 24 V Illuminated Joystick Remote, 12’ (3.7 m) (436 mm X 152 mmX 185 mm) (5.45 mm X 25.9 m)

(114.3 mm X 254 mm)

PERFORMANCE:

Permanent Magnet, 2 hp (1.5kw), 12 VDC Illuminated Joystick Remote, 12’ (3.7 m)

Drum Size: Net weight

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

Bolt Pattern

3 Stage Planetary 241:1

PE 2.5 PERFORMANCE:

PE 3.5 PERFORMANCE:

ATV/UTV WINCHES

PE4500

2,500 LB Capacity (1134 kg) PN: 77-50105

Illuminated Handlebar Remote Control

mpm 4.3

RATED LINE PULL CABLE CAPACITY

amps @ 12 V

Layer

lb.

meters

4500

2041

4.6

1500

380

6.6

3880

1760

31.5

9.6

2200

998

5.2

1.6

100

3420

1551

15.2

3000

1361

4.6

1.4

145

3050

1383

21.3

4500

2041

3.3

170

2750

1247

24.4

ATV/UTV WINCHES

TOUGHSERIES

ATV/UTV WINCH

PRODUCT CATALOG

PAGE 26

TOUGHSERIES

ATV/UTV WINCH

PE3500

PE2500

3,500 LB Capacity PN: 76-50110

2,500 LB Capacity PN: 76-50105

PRODUCT FEATURES:

•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Includes Both Handlebar and Handheld Remote Controls

PE3500 PRODUCT SPECIFICATIONS:

PE2500 PRODUCT SPECIFICATIONS:

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

76-50110*

Dimensions (LxWxH)

13.4” X 4.7” X 4.3”

76-50105*

Dimensions (LxWxH)

13” X 5” X 5”

Cable

3/16” X 50’ (nominal 5600 lbs)

23.4 lbs (10.6 kg)

Drum Size: Net weight

2” X 2.95” 24.2 lbs (11 kg)

1.89” X 3” (3 bolts or 2 bolts)

Bolt Pattern

3” X 4.87” (4 bolts)

3 Stage Planetary 262:1 Permanent Magnet, 2 hp (1.5 KW), 12 V

12’ (3.7 m) Handheld Remote (340 mm X 119 mm x 109 mm)

7/32” X 45’ aircraft cable (nominal strength = 5600 lbs, 2540 kg) 1.5” X 3.2” (Diameter X Length)

Bolt Pattern

2500 lbs (1134 kg)

3 Stage Planetary 153:1 Permanent Magnet, 1.6 hp (1.2 KW), 12 V 12’ (3.7 m) Handheld and Handlebar Included (330 mm X 127 mm x 127 mm) (4.8 mm X 15.2 m)

PE2500 PERFORMANCE:

PE3500 PERFORMANCE: LINE PULL

LINE SPEED MOTOR CURRENT

LINE PULL

LINE SPEED MOTOR CURRENT

fpm

mpm

fpm

mpm

amps @ 12 V

Illuminated Handlebar Remote Control

amps @ 12 V

12.0

3.7

15.00

19.1

5.8

1000

454

9.2

2.8

40.00

500

227

15.3

4.7

31.00

2000

907

7.5

2.3

80.00

1000

454

12.8

3.9

62.00

3000

1361

1.5

120

1500

680

9.0

2.7

90.00

3500

1588

1.2

140

2000

907

6.4

115.00

2500

1134

4.5

1.4

150.00

ATV/UTV WINCHES

Drum Size: Net weight

Illuminated Joystick Remote Control

Part Number Rated line pull Gear Train Gear Ratio Motor Control Pendant

3500 lbs (1588 kg)

Cable

ATV/UTV WINCHES

•PROVEN DESIGN •RELIABLE RECOVERY, LOW AMP DRAW •ILLUMINATED REMOTE CONTROL

*These Models Are Available Only While Supplies Last.

PAGE 27

PRODUCT CATALOG

PAGE 28

WINCH ACCESSORIES

WINCH ACCESSORIES RECOVERY/TREE STRAP

PN: 19-50041

Rugged nylon strap can be used to extend range and to protect anchor point. The strap has built in blue lines that appear over time indicating that the strap is no longer safe to use, & needs to be replaced. 3” X 15’ in dimension, 24,000 pound rating.

ROLLER FAIRLEAD COVER

PN: 8402

This impact resistant cover protects your Mile Marker WH-9 and Wh-10 roller fairlead from weather and debris while adding a finished look to the front of your vehicle.

REPLACEMENT CABLE 5/16” X 100’ PN: 19-50010C 3/8” X 100’ PN: 19-50020C Galvanized aircraft cable with replaceable hook. Replace your winch cable at the first sign of stranding to stay safe.

SYNTHETIC ROPE Now Available in New Color Options. 3/8” X 100’ Assembly (16,200 lbs. Min Break Force) PN: 19-52038-100 5/16” X 100’ Assembly (11,700 lbs. Min Break Force) PN: 19-52516-100 1/4” X 50’ Assembly (7,740 lbs. Min Break Force) PN: 19-52014-50 3/16” X 50’ Assembly (5,440 lbs. Min Break Force) PN: 19-52316-50

NEOPRENE WINCH COVER PN: 8503 FITS HYDRAULIC WINCHES PN: 8504 FITS ELECTRIC WINCHES 6K AND UP

Wraps snugly around your winch for All weather protection.

DONT GET STUCK WITHOUT THEM Conquering the off-road paths of the world can prove to be a tough adventure. Count on these Mile Marker Accessories to level the playing field while protecting yourself and your vehicle.

HEAVY DUTY 3/4 SHACKLE HEAVY DUTY SNATCH BLOCK

PN: 60-50086 PN: 60-50085

ACCESSORIES

Snatch Block is rated at 24,000 pounds and utilizes a grease fitting to provide less friction on pulley rotation. Multi-purpose.

PAGE 39

PRODUCT CATALOG

WH-9 ROLLER FAIRLEAD

Universal Roller Fairlead works with 8000-12000 lb. Mile Marker, Warn, Ramsey or Superwinch winches. Also fits winch mount bumpers.

Attractive Chrome and Black finish Roll- Replaceable roller fairlead for 4,500 er Fairlead. Works with 8000-12000 lb. through 6,000 pound Mile Marker winch Mile Marker, Warn, Ramsey or Super- models. winch winches.

PN: 19-00001

To maximize your capabilities on the trail, count on the Mile Marker winch accessory kit. This essential kit includes: Heavy duty Snatch block, 24,000 pound recovery/tree strap, two heavy-duty clevis shackles, Mile Marker hook strap, Mile Marker winch gloves, and nylon carrying case.

WH-2 ROLLER FAIRLEAD Replaceable roller fairlead for 2,000 through 3,500 pound Mile Marker winch models.

ALUMINUM HAUSE FAIRLEAD PN: 19-52000 (ATV) PN: 19-52001 (Full Size) For Use With Synthetic Rope

ACCESSORIES

WINCH ACCESSORY KIT

WH-4 ROLLER FAIRLEAD

WH-10 ROLLER FAIRLEAD

PRODUCT CATALOG

PAGE 40

WINCH ACCESSORIES

WINCH CONTROL UPGRADE

SUV/Truck MiFi Technology™ Upgrade PN: 93-72000

ATV/UTVMiFi Technology™ Upgrade PN: 93-72105

The Mifi Technology™ system is available as an upgrade to experience the safety, precision, and reliability of the most innovative controls in the industry. Available as a kit to retrofit any existing winch, the MiFi Technology System is available in both a full size, SUV/Truck Winch kit (6,000 pound winches and up) and Utility/ATV Size Winch Kits (4,500 pound winches and below).

DONT GET STUCK WITHOUT THEM

QUICK DISCONNECT KITS FRONT MOUNT DISCONNECT KIT This kit will enable you to put the Mile Marker winch on a quick disconnect system for the front mount if the winch is to be installed on a receiver-type hookup. Electric Front Quick Disconnect Kit PN: 76-93-54000

Hydraulic Rear Quick Disconnect Kit PN: 70-53000

Hydraulic Front Quick Disconnect Kit PN: 70-54000

Electric Rear Quick Disconnect Kit PN: 76-93-53000

REAR MOUNT DISCONNECT KIT This kit enables a Mile Marker winch to function as a quick disconnect system for the rear mount if the winch is to be installed on a receiver-type hookup. Includes hose or cable needed to route system down length of vehicle.

JOYSTICK REMOTE

PN: 93-50057 HANDLEBAR REMOTE

PN: 7075

PN: 93-50105 WIRELESS REMOTE

For use with all Mile Marker Solenoid For use with all Mile Marker ATV/UTV Provides wireless control from up to 50 Controlled Electric and Hydraulic winch- winches. Adjustable mount provides feet away. For use with all Solenoid Conaccessible control to your trail blazing trolled winches with Hi-Profile control es. box. quad.

Available Early 2009

MIFI JOYSTICK REMOTE

PN: 93-72050 MIFI HANDLEBAR REMOTE PN: 93-72106 NEW WIRELESS REMOTE

PN: 7076

ACCESSORIES

For use with all MiFi Technology Con- For use with all MiFi Technology Con- Provides Plug and Play wireless control from up to 50 feet away. For use with all Solenoid trolled WInches. trolled ATV/UTV WInches. controlled winches with IP67 connector.

PAGE 41

PRODUCT CATALOG

PAGE 42

ACCESSORIES

Conquering the off-road paths of the world can prove to be a tough adventure. Count on these Mile Marker Accessories to level the playing field while protecting yourself and your vehicle.

DRIVETRAIN SYSTEMS

AMC QUADRA-TRAC

FOUR WHEEL DRIVE CHAIN Both MOPAR conversions fit ‘75-’79 models only. MOPAR, Ramcharger, Trail Dusters Heavy duty conversion kit 1/2 Ton 3/4 Ton pickups, includes premium hubs

BORG WARNER 1339 TRANSFER CASE. FITS ‘73-’79 VEHICLES ONLY. 602 603

Part-time conversion No hubs or chain (uses stock chain) Same as above w/ premium 1/2 Ton hubs Same as above with CJ hubs Part time with 16% overdrive

INCLUDES NEW CHAIN - NO HUBS

Same as above w/ premium 1/2 Ton hubs Same as above with CJ hubs

95-91204 95-12204 95-15204 95-91203

95-12203 95-15203

CONVERSIONS AND ACCESSORIES For owners of full time 4WD vehicles, here is a selection of products that allow for a variety of conversions. Count on these kits to reduce wear and tear on your drivetrain as well as saving at the gas pump. In some cases, these are the only kits available for your vehicle. In all cases, each kit has been carefully designed to provide years of trouble free service.

JEEP MANUAL HUB CONVERSION Replace those non-serviceable parts found on 1984 and newer XJ, YJ and TJ Jeeps with Mile Marker’s premium front hub conversion kit. PN: 33-50010 PN: 33-50020

PAGE 43

PRODUCT CATALOG

8005 8007 8092 8009 8012 8014 8015 8022 8027 8028

MOPAR without hubs 30T Ford no hubs GM-Ford without hubs GM-Ford 1/2 Ton hubs 3/4 Ton GM-Ford ‘73-’77 w/hubs 1 Ton GM-Ford with hubs

75-32203 95-94203 95-92203 95-22203 95-24203 95-26203

203 Transfer case without hubs With premium 1/2 Ton hubs (also fits ‘78-’79 3/4 Ton) With premium hubs fits ‘73-’77 3/4 Ton With premium hubs 1 Ton GM, Ford Bearing kit

501

LOCK OUT HUBS SEE NEXT PAGE FOR APPLICATION CHART

502 503 505 701

SUPREME HUB

STREETMASTER HUB

STAINLESS STEEL

CLASSIC HUB

The chrome appearance is the ultimate in style and service. Available for most domestic and import applications, it features the latest patented technology and decidedly smooth operation with a limited lifetime warranty.

Featuring the contrasting look of a chrome cap with a virtually unbreakable black nylon reinforced fiberglass dial, the Street Master is solid value in a 4WD hub. The Street Master features a limited lifetime warranty.

Made by die-casting aluminum into a pre-made stainless jacket, these hubs provide lightweight strength and corrosion resistance. It uses the ultimate combination of materials for the cap of a locking hub.

This is the hub for older vehicles – as far back as 1942. This tried and true hub has been around for more than 30 years and will be one of the most dependable pieces of equipment on your rig. The large handgrip surface allows easy engaging, even with clumsy gloves.

PRODUCT CATALOG

PAGE 44

DRIVETRAIN

Fits 203 transfer cases ‘73-’78 with 2 1/2” x 98 pitch chain Fits Quadra-TRAC Wagoneer, C CJ-7, Cherokee, pickups (‘73-’79) Fits Quadra-TRAC with part-time 16% overdrive conversion NP203 ‘73-’79, 1/2 x 2 x 72 NP208 Borg Warner 1356 ‘80-’88, 1/2 x 11/4 x 84 NP208 ‘80-’90, 1/2 x 11/4 x 72 NP219, 228, 229 ‘80-’93, 3/8 x 13/4 x 98 Borg Warner 1350, NP 207, NP 231C, 233C ‘84-’95, 1/2 x 11/4 x 62 NP231C ‘89-’95, 1/2 x 1 x 62 NP242 ‘89-’95, 1/2 x 1 x 72

FORD & GM 203 N.P.

SHAFT KITS

FOUR WHEEL DRIVE CHAIN

Wrangler/Cherokee with 260X, U-joint 27-spline, 1984-1994 Wrangler/Cherokee with 297X, U-joint 27-spline, 1995+hub conversion kit.

HUB APPLICATION GUIDE SUPREME

HUB SPECIFICATION GUIDE Selectro PN

MM PN

Bolt Circle

11001 104

Vehicle Model/Year # of Bolts

# of Splines

Axle O.D.

Selectro PN

Internal

1.250

Bolt Circle

# of Bolts

# of Splines

Axle O.D.

11025

3.875

1.250

3.125

1.250 1.250

Internal

1.250

11026

423

3.750

1.250

11027

4.000

437

3.543

1.187

457

3.437

1.187

430

3.260

1.094

432

3.750

1.250

434

3.465

1.250

11034

3.960

1.312

410

3.543

1.156

11035

4.375

1.375

435

3.260

1.143

11038

5.563

1.594

11016

2.844

1.250

466

3.543

1.300

11017

3.968

1.375

490

3.543

1.100

11018

3.750

1.125

449SS

Internal

1.312

3.750

1.125

459SS

Internal

1.500

11021

4.375

1.375

11162

5.563

1.750

11022

4.000

1.437

11165

5.563

1.750

470

3.440

1.187

11166

5.375

1.750

481

3.437

1.125

11167

5.080

1.580

427

4.500

1.016

95-37044

4.500

1.250

436

3.543

1.080

4.50

1.206

420

Vehicle Model/Year

AMC/JEEP

SUPREME Chrome

423

Land Rover (6 bolt 10-spline axle) Land Rover (6 bolt 24-spline axle) Series I, II, III, All W.B.

420 432 432

CHEVROLET/GMC

Blazer, Suburban, Jimmy, ‘69-’91 1/2 Ton Pickup (K-10) ‘69-’87 3/4 Ton Pickup Chevy ‘78-’87 1/2 Ton Pick-up ‘54-’55 Chevy 3/4 & 1 Ton pick-up ‘54-’56 Chevy 1/2 Ton Pickup ‘56 GMC 1/2 Ton Pickup ‘56-’57 Chevy 1/2 Ton Pickup ‘57-’59 GMC 1/2 Ton Pickup ‘58-’59 Chevy 1/2 Ton Pickup ‘60-’68 Chevy 3/4T (K-20) Pickup ‘60-’77 Chevy IT (K-30) Pickup ‘78-’87 Chevy IT Dana 50 & 60 Axle ‘77-’87 Chevy 3/4 & 1 Ton Pickup ‘57-’59 GMC 3/4 & 1 Ton Pickup ‘58-’59 GMC 350, 370, NAPCO Axle

CHRYSLER/PLYMOUTH/DODGE RAM Charger/Trail Duster ‘80-’93 1/2T W-100 P/U ‘69-’74, ‘80-’93

PAGE 45

PRODUCT CATALOG

STREET MASTER

Stainless

Chrome

Stainless

SELECTRO

NUT CONVERSION KIT

Classic

If Required

481 457 457 470

CJ Universal ‘42-’71 (6-bolt 10-spline) CJ Universal ‘72-’80 (6-bolt 27-spline Wagoneer, ‘71-’73 CJ Universal ‘81-’86 (5-bolt 27-spline) J10 Pickup ‘74-’80 J20 Pickup ‘74-’77 (6 bolt 19-spline) J20 Pickup ‘78-’90 Wagoneer, Cherokee ‘74-’87 Gladiator, ‘74-’87 Military 1 1/4 Ton M725, M726, M 728, M715

BRITISH LEYLAND

428

CHRYSLER/PLYMOUTH/DODGE

1/2T W-100 P/U ‘57-’68, (6 bolt 19-spline) 3/4 Ton W-200 Pickup except full-time 4WD ‘57-’74 1/2 Ton Military Pickup ‘41-’46 1 Ton W-300 Series ‘58-’67 1 Ton W-300 Series ‘68-’75 1 Ton W-300 Series ‘76-’89 1 Ton Dana 50 & 60 Axle ‘90-’93 1 Ton WC-50, WC-60 Power Wagon ‘42-’56 1 Ton WM-300 ‘57-’75 Bronco ‘66-’87, ‘90-’96 A, B Bronco II, Ranger, ‘83-’89 A, C Explorer, ‘90-’94 A, C Ranger, ‘90-’97 A, C 1/2 Ton Pickup ‘59-’87, ‘90-’96 A, B 3/4 Ton P/U w/Spline wheel hub A, B 3/4 Ton w/3500 axle ‘63-’77 ex. F/T F-250 hv dty ‘59-’87, ‘90-’96 ex. F/T A, B 1 Ton Dana 50 & 60 Axle ‘90-’04 A F-350, 450 Dana 50 & 60 Axle ‘76-’04 A 1 Ton Pickup ‘56-’72 F-600, F-700 4WD Conv ‘74-’83 RDS 75 Axle RDS 90 Axle ‘84-’94

104

302

103

104 104 104

302 302 302

103 103 103 11035-01 11035-01

104 104 104

302 302 302

103 103 103 11027-01 11027-01 11026-01 11026-01 11016-01 11016-01 11001-01

423 449SS 449SS 11025-01 11025-01 11025-01 104 104

302 302

103 103

NUT CONVERSION KIT

Classic

If Required

104

302

103

104 104

302 302

103 103

95-32720 95-27988 95-27997 95-27997 95-32720 95-32720

427** 428** 428**

423 449SS 449SS 449SS

95-32721 95-32721 11025-01 11038-01 11038-01 11162-01

457 457 457 481 104 104

302 302

103 103

423 423 11021-01 11034-01 11166-01

Pickup ‘94-’97 A, Navajo ‘90-’94 A, C

428

All models (6 bolt 10-spline) Hardbody ‘86 1/2-’89 (6 bolt 27-spline) 1/2 Ton P/U ‘86 1/2-’89 (6 bolt 27-spline) Pathfinder ‘86 1/2-’89 (6 bolt 27-spline) Nissan ‘90-’96 (6 bolt 28-spline)

434 430 430 430 435

ROCKWELL

SELECTRO

11022-01 11022-01 11022-01

Scout II (ex. F/T 4WD) ‘72-’80 1/2 Ton Pickup ‘74-’75 457 Travel-all 1/2 Ton ‘74-’75 Scout ‘61-’71 1/2 Ton Pickup ‘64-’73 Travel-all 1/2 Ton ‘64-’73 3/4 Ton Pickup ‘56-’75 Travel-all 3/4 Ton ‘56-’75 1 Ton with 9000# Axle 21 Spline 1 Ton H.D. 200 with FA-20 axle International Hub

NISSAN

Stainless

449SS

436

MAZDA

Chrome

11027-01 11035-01 11017-01 11034-01

Tracker (all)

INTERNATIONAL HARVESTER

STREET MASTER

Stainless

423 423

FORD

GEO

HUB APPLICATION GUIDE

DRIVETRAIN

MM PN

Chrome

95-27997

11038-01 11162-01 11165-01

RDS 75 axle RDS 90 axle RDS 90 axle 16 hole

Suzuki

Sierra, Samurai ‘82-’98 Sidekick, X-90 ‘82-’98

436 436

Land Crusier ‘63-’75, T100 ‘93-’98 C Land Cruiser, Pickup ‘76-’85 A Land Cruiser through ‘75 4 Runner 4x4 Pickup ‘86 1/2-’94 A Pickup, Hillux, 4Runner ‘76-’98 T-100 ‘93-’98 A Van Previa ‘86-’92 A

490 466 410 490 490 490 490

Toyota

NEW

35 spline Dana 70 hub

95-29918

DRIVETRAIN

HUB APPLICATION GUIDE

459SS

A. if OEM automatic hubs, a conversion kit is required to convert manual hubs. B. ‘73-’79 vehicles with full-time 4 wheel drive require a transfer case conversion kit. See 4x2 Conversion Kit. C. See Mile Marker manual hub applications for Supreme, Street Master, Chrome, and Stainless Steel hub to replace automatic hubs. Most of these conversion kits are required by Warn hubs, rather than Mile Marker hubs. **These hubs are a classic style “Top Hat” designed hub.

PRODUCT CATALOG

PAGE 46

APPAREL AND PROMOTIONAL

WARRANTY STATEMENT Mile Marker/Selectro hubs, conversion kits limited warranty Mile Marker Inc. warrants directly to the first purchaser of each Mile Marker Supreme and Streetmaster locking hub that it will be free from defects in material and workmanship appearing under normal use and service for as long as said purchaser owns the locking hub. Mile Marker “Selectro Classic” models have a 1-year warranty. All Mile Marker Conversion Kits have a 1-year warranty, except for the Four Wheel Drive Chain included in some kits, which has a 90-day warranty. This warranty extends only to the first purchaser. Warranty registration cards for each product must be submitted at the time of purchase or within 30 days by the end user. If you discover a hidden defect, Mile Marker will, as its option, repair or replace the product or necessary replacement parts at no charge to you, provided you remove the product from the vehicle and return it prepaid to Mile Marker Inc. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) Number before returning the product. If the product was purchased outside the United States, the owner must return the product to the original place of purchase.

ABUSED WORLD WIDE T-SHIRT Small Medium Large X-Large XX-Large

MILE MARKER HAT

PN: 30-50016

PN: 30-50001 PN: 30-50002 PN: 30-50003 PN: 30-50004 PN: 30-50005

Mile Marker Inc. hydraulic winch limited warranty Mile Marker Inc. warrants each winch when used in normal service against factory defects in materials and workmanship to the original commercial and recreational purchaser for the period of five (5) years. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Excluded from this warranty are the finish of the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Registration cards must reference winch serial number to be valid. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was originally registered. The owner will be responsible for removing the winch and returning it to Mile Marker freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the problem. Mile Marker will repair or replace any or all winch parts, which after inspection determines to be defective. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) Number before returning the product. If the product was purchased outside the United States, the owner must return the product to the original place of purchase. Mile Marker Inc. electric winch limited 2-year warranty Mile Marker, Inc. offers a limited two (2) year warranty to the original retail purchaser for each new Mile Marker electric winch, used as a recreational recovery winch only, against manufacturing defects in workmanship and materials on all mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Excluded from this warranty are the finish of the winch and any condition Mile Marker determines to have been caused by misuse or abnormal use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Registration cards must reference winch serial number to be valid. Warranty will only be valid for the original purchaser of the winch and installed on the vehicle for which it was originally registered. The owner will be responsible for removing the winch and returning it to Mile Marker freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the problem. Mile Marker will repair or replace any or all winch parts, which after inspection determines to be defective. If the product was purchased in the United States, the owner must contact our warranty department to get a Return Goods Authorization (RGA) Number before returning the product. If the product was purchased outside the United States, the owner must return the product to the original place of purchase. Mile Marker electric winches are intended for recreational self recovery usage. The warranty is void if the winch is used in commercial or industrial applications. General Warranty Procedure and Policy: For U.S. Customers: DO NOT RETURN TO PLACE OF PURCHASE. The end user MUST contact Mile Marker directly by calling 1-800-886-8647. Our customer service representatives will work to resolve any warranty issues. The owner must receive a Return Goods Authorization (RGA) Number before returning any product. The owner will be responsible for removing the product and returning it to Mile Marker freight prepaid unless a determination is made that replacement parts can be sent out which will remedy the problem. Mile Marker will repair or replace any or all parts, which after inspection determines to be defective. For International Customers: RETURN PRODUCT TO PLACE OF PURCHASE, OR IF NOT FEASIBLE, CONTACT MILE MARKER. The Distributor or Dealer may then repair or replace the product. The dealer may then contact Mile Marker by calling 1-800-886-8647 to receive an RGA number to return merchandise for warranty consideration. If a Distributor or Dealer chooses to submit warranty claims for the end user or Jobber there are certain guidelines that need to be adhered to. They are as follows: • The merchandise must be within the warranty period. See the Mile Marker warranty statement for time periods. • Freight must be prepaid to the designated warranty service location. • Mile Marker will inspect the returned merchandise and make a determination if the problem is warrantable. If it is warrantable Mile Marker will repair and return freight prepaid. For all returned merchandise: If it is determined that a problem is not warrantable Mile Marker will contact the returning party to determine a disposition of the merchandise as follows: •Return “as is” without repairing. •Provide an estimate of the repair costs to the sender for approval/disapproval and take action as directed by the sender. After receiving the Returns Good Authorization (RGA) Number: Attach the RGA Number, your name, address, phone number and a detailed description of problem relating to malfunction and a copy of a bill of sale. To obtain any warranty coverage, it is absolutely necessary that you present proof of purchase acceptable to Mile Marker, such as a purchase receipt. Please remove the cable from any winch to save both parties on freight costs, and package the product either in its original packaging, or other adequate means of packaging. Mile Marker will not repair or warranty items that are damaged in shipment to us, unless it is no fault of the customer.

WE’VE GOT YOU RECOVERED POSTER

PN: 80-00010

WINCH DISPLAY STAND

PN: 80-76-00006

MILE MARKER BANNER

PN: 80-00009

POWER TO MOVE BANNER

PN: 80-00008

Warranty Exclusions: There are certain conditions that are not eligible for warranty consideration by Mile Marker. They are as follows but not limited to the following: • Winches returned in pieces will not be considered for warranty. • Any item that has been involved in an accident will not qualify for warranty. • Winches caked in mud will not qualify for warranty • Winches that have been modified or taken apart and reassembled will not qualify for warranty. • Winches that have the tie bars separated from the housing will not qualify for warranty. • Winches that show general abuse will not qualify for warranty. • Products damaged in shipping due to poor packaging will not qualify for warranty. • Mile Marker will not issue an RGA for products that have been batched. If a Distributor or dealer receives a winch or other item for warranty consideration by Mile Marker, it must have an RGA issued and sent to the designated service location within 15 days of receipt from the end user. Mile Marker will not accept any merchandise without an RGA number or that exceeds the 15 day period. No credits will be provided. Products returned to Mile Marker will be repaired or replaced and returned. Important Notice: To the fullest extent permitted by applicable law, the following are hereby excluded and disclaimed: 1. All warranties of fitness for a particular purpose; 2. All warranties of merchantability; 3. All claims for the face hereof. Some states do not allow the above exclusions or disclaimers in consumer transactions and as such this disclaimer/exclusion may not apply to you. To the extent such warranties of fitness or merchantability are deemed to apply to this product, they exist for only so long as the express limited warranty elsewhere set forth is in existence. The obligation under this warranty, statutory or otherwise, is limited to the replacement or repair at the manufacturer, upon inspection of such part(s), to have been defective in material or workmanship. This warranty does not obligate Mile Marker, Inc. to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to a product upon which repairs or alterations have been made, unless authorized by the manufacturer, or for equipment misused, neglected or improperly installed.

Consequential Damages: Mile Marker accepts no liability, responsibility or obligations for incidental, indirect or consequential damages from the use of Mile Marker products no matter what the conditions of use. This includes injuries, repair costs, lost time, economic impacts and other similar impacts. Some states do not allow the above exclusions or disclaimers in consumer transactions and as such this disclaimer/exclusion may not apply to you. This warranty gives you specific legal rights and you may have other legal rights which vary from state to state. To submit a warranty claim contact; Mile Marker, Inc. Warranty Administrator: 2121 Blount Road, Pompano Beach , FL 33069. Phone: 1-(800) 886-8647

PAGE 47

PRODUCT CATALOG

PAGE 48

WARRANTY INFO

APPAREL AND PROMOTIONAL

Mile Marker, Inc. reserves the right to change, alter or improve its products in design, materials or appearance without incurring any obligation to incorporate such changes in products that were previously manufactured.

MILE MARKER 2121 BLOUNT ROAD POMPANO BEACH, FL 33069 USA WWW.MILEMARKER.COM INFO@MILEMARKER.COM

INCORPORATED

800.886.8647 TOLL FREE 954.782.0604 USA & INT’L 954.782.0770 FAX

PN: 30-50020-09

SUBMERSIBLE Completely sealed Gear Train is smoothest running self recovery system available.

BUILT TO LAST Ductile Iron Body

(12,000 lb models) and Stainless Steel Fasteners provide unmatched construction for a lifetime of corrosion-free abuse.

The Mile Marker Hydraulic Winch System has been a selfrecovery icon for over a decade. This legendary system utilizes the vehicleâ&#x20AC;&#x2122;s OEM power steering pump as its power source. Everyday, more than 200 million power steering pumps operate flawlessly. Used in all types of vehicles, under every condition, from 50 below to 135 degrees above, the pump must perform for years without service or adjustment. It has to withstand every type of abuse without failure. Having a built-in governor (the pressure relief valve), it is impossible to overload or overwork the pump. Steering is arguably the most important function while driving, so the power steering pump has evolved into the most reliable system on vehicles today. Mile Marker chose to design a winch to use this continuous reliable power supply over the battery power used by competitors. After rigorous testing, we learned it was the right choice. The Mile Marker Hydraulic Winch can run continuously under load without any battery drain. This Hydraulic Winch System is the choice of the U.S Army, as Mile Marker became the primary self-recovery outfitter for the HMMWV (Hummer) as well as many other tactical vehicles around the globe.

PAGE 4

The H-Series Hydraulic Winch Line offers the most versatility in mounting and installation options. With a completely independent solenoid control valve and multidirectional motor positions, the H Series is the professional choice for a custom recovery system application.

The HI-Series Hydraulic Winch comes with the solenoid control valve factory mounted to the winch, allowing for a more efficient installation. This outfit is designed to be installed with a permanent location in mind.

PAGE 6

PAGE 8

HYDRAULIC WINCH SYSTEMS

SMOOTH OPERATION Planetary

from the elements; vehicle recovery when you would truly need it: covered in mud and water.

PAGE 5

H SERIES HYDRAULIC

FEATURES H9000

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed

PERFORMANCE H9000

3.5 GPM @ 1500 PSI

Included in Kit: 12 ft. lead remote control, All hoses and fittings included, Power in and Power out, Remote Solenoid-activated control valve (draws only 2 amps), Adapter for vehicle specific power steering pump. Rated to 7 gpm. Required for H Series Winches.

Chevy/GMC 34-5010-15 34-5020-14 34-5010-12 34-5010-13

Ford

34-5010-09 34-5020-07 34-5010-07H 34-5020-06 34-5020-04 34-5020-05 34-5010-34 34-5020-35 34-5020-10

Dodge

1997+ ford F-150, Expedtion 78-96 Ford full size. 97-98 F250, F350 78-98 Ford full size (with hydroboost) 72-77 Ford full size 83-92 Ford Ranger, 90-94 Explorer 92-96 Ford Ranger, 95-96 Explorer 99-04 Ford 250, 350, 450, 550, Excursion 2005 and up Ford 250, 350,450, 550, Excursion 02+ Ford Ranger/Sport Trac Dodge 94+full size Dodge 72-93 full size

34-5020-22

Dodge Dakota 6 & 8 cylinder

Dodge Dakota 4 cylinder

34-5010-18

Truck & Scout

34-5010-50 34-5020-51 34-5020-55

Jeep Cherokee Jeep CJ, Scrambler Jeep YJ, TJ & Rubicon

Jeep

Nissan 34-5010-30 34-5010-31

Toyota

34-5020-41

Land Rover

34-5010-45

AM Gen.-Hummer 34-5010-01

34-5010-80

PAGE 6

4 10.5 5,400 57 900

PERFORMANCE H10500

3.5 GPM @ 1500 PSI

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

1 5.65 10,500 31 1,600

(International 7400)

2 6.43 8,500 36 1,300

3 7.41 7,400 42 1,200

4 8.58 6,400 48 1,000

FEATURES H12000

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners Reversible mounting on 3 sides Ductile Iron Body 2 speed

Land Rover Discovery 94-98

General kit; does not include PS pump Valve only; 24-volt system (No hose, fittings)

Medium Duty Trucks

3 8.8 6,200 48 1,000

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed

Toyota All

HI (Civilian) H2

34-5011-00

2 7.48 7,300 38.4 1,200

FEATURES H10500

Nissan 86-93 except Pathfinder 9195, 94-96 truck 91-95 Nissan Pathfinder, 9496 truck

34-5010-17 34-5010-15

General kit

1 6.16 9,000 33.6 1,500

88+ GM C/K,99+ Tahoe/Suburban, Silverado 72-87 GM C/K, 88-91 RV series GM S-series GM S-series w/4.3L Vortec

34-5010-24 34-5020-23 34-5010-20

International

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

PERFORMANCE H12000

3.5 GPM @ 1500 PSI

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

1 5.65 12,000 31 2,000

2 6.43 9,400 36 1,550

3 7.41 8,200 42 1,350

4 8.58 7,000 48 1,150

SPECIFICATIONS H9000 Part Number

70-50080C

Rated line pull (single line)

9,000 lbs.@1500 PSI (4,090 kgs.)

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

14 C.I. Hydraulic

Cable

3/8” x 100’ (14,400 lbs. nominal)

Drum Size: Diameter/Length

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

93 lbs. (42.2 kg)

Bolt Pattern

10” x

4.5” (4 bolts, 3/8”)

SPECIFICATIONS H10500 Part Number

70-50050C

Rated line pull (single line)

10,500 lbs.@1500 PSI (4,770 kgs.)

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

17.9 C.I. Hydraulic

Cable

3/8” x 100’ (14,400 lbs. nominal)

Drum Size: Diameter/Length

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

93 lbs. (42.2 kg)

Bolt Pattern

10” x

4.5” (4 bolts, 3/8”)

SPECIFICATIONS H12000 Part Number

70-52000C

Rated line pull (single line)

12,000 lbs.@1500 PSI (5,454 kgs.)

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

18.7 C.I. Hydraulic

Cable

3/8” x 100’ (14,400 lbs. nominal)

Drum Size: Diameter/Length

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

98 lbs. (44.5 kg)

Bolt Pattern

10” x 4.5” (4 bolts, 3/8”)

PAGE 7

HYDRAULIC WINCH SYSTEMS

The Mile Marker H Series Hydraulic Winch can be mounted to the front or rear of the vehicle as a permanent or detachable recovery system. This system is independent from its solenoid control pack to give more freedom in mounting options and vehicle application. The installation of one of the H Series models (H9000, H10500, and H12000) requires a vehicle specific 34-Series valve adapter kit (see application chart below).

HI SERIES HYDRAULIC

FEATURES HI9000

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out

PERFORMANCE HI9000

3.5 GPM @ 1500 PSI

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

1 6.16 9,000 33.6 1,500

2 7.48 7,300 38.4 1,200

3 8.8 6,200 48 1,000

4 10.5 5,400 57 900

FEATURES HI10500

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out

ADAPTERS MIGHT DIFFER FROM ITEMS SHOWN To be used to adapt power steering pump to HI Series Winch System. See Chart for Specific Vehicle Application.

PERFORMANCE HI10500

3.5 GPM @ 1500 PSI

PART NUMBER: 35-5020-15

APPLICATION: GM, Dodge, International, Chevrolet, H2

35-5020-22

2003 & up Durango

35-5020-07

Ford, up to 1998

35-5020-34

1 5.65 10,500 31 1,600

2 6.43 8,500 36 1,300

3 7.41 7,400 42 1,200

4 8.58 6,400 48 1,000

Part Number

75-50085C

Rated line pull

9,000 lbs.@1500 PSI

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

14 C.I. Hydraulic

Directional Control

12V Solenoid, 3 way

Valve

Integtrated

Control Pendant

12’ Wired Remote

Hoses

steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable

(4,090 kgs.)

(max flow 3.5 gpm) 2 amps

5’ & 6.5’:

3/8” x 100’ (14,400 lbs. nominal)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

103 lbs. (46.7 kg)

Bolt Pattern

10” x

SPECIFICATIONS HI10500

4.5” (4 bolts, 3/8”)

Part Number

75-50050C

Rated line pull

10,500 lbs.@1500 PSI

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

17.9 C.I. Hydraulic

Directional Control

12V Solenoid, 3 way

Valve

Integtrated

Control Pendant

12’ Wired Remote

Hoses

(4,770 kgs.)

(max flow 3.5 gpm) 2 amps

5’ & 6.5’:

steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable

3/8” x 100’ (14,400 lbs. nominal)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

103 lbs. (46.7 kg)

Bolt Pattern

10” x

4.5” (4 bolts, 3/8”)

Ford 1999 to 04; F-150 1997 to 04

35-5020-10

Ford SportTrac/Ranger

35-5020-51

Jeep

35-5020-31

Nissan

35-5020-41

Toyota

35-5020-45

Land Rover

35-5020-17

AM General–Hummer H1

35-5020-35

2005 and up Ford Super Duty

35-5020-36

2007 Ford F-550 Only

35-5020-81

Chevy 5500

PAGE 8

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

SPECIFICATIONS HI9000

FEATURES HI12000

Freespooling Mechanical lock Sealed against the elements Can use underwater Corrosion resistant Stainless steel tie bars and fasteners 2 speed power in & power out Reversible Mounting Ductile Iron Body

PERFORMANCE HI12000

3.5 GPM @ 1500 PSI

Layer of Cable Line speed-low gear (FPM) Rated pull (lbs.) Line speed-high gear (FPM) Rated pull (lbs.)

1 5.65 12,000 31 2,000

2 6.43 9,400 36 1,550

3 7.41 8,200 42 1,350

4 8.58 7,000 48 1,150

SPECIFICATIONS HI12000

Part Number

75-52000C

Rated line pull

12,000 lbs.@1500 PSI

Gear Train

Planetary

Gear Ratio

6:1 (low gear)1:1(high gear)

Motor

18.7 C.I. Hydraulic

Directional Control

12V Solenoid, 3 way

Valve

Integrated

Control Pendant

12’ Wired Remote

Hoses

steel braid, high pressure, 3k PSI, Uses size 6 JIC swivels on both ends

Cable

(5,454 kgs.)

(max flow 7 gpm) 2 amps

5’ & 6.5’:

3/8” x 100’ (14,400 lbs. nominal)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Total shipping weight

110 lbs. (49.9 kg) 10” x 4.5” (4 bolts, 3/8”)

Bolt Pattern

PAGE 9

HYDRAULIC WINCH SYSTEMS

The Mile Marker HI Series Hydraulic Winch was intended for permanent mounting in the front or rear of a vehicle. The solenoid control valve is integrated into the winch body, and therefore always remains in the same location as the winch itself. These systems include all necessary hoses, solenoid control valve, remote pendant, roller fairlead with fasteners, and winch cable. To adapt to your vehicle’s power steering pump, the HI Series winches (HI9000, HI10500, and HI12000) require a vehicle specific 35-series vehicle adapter kit (see below).

EVERYTHING YOU NEED, NOTHING YOU DON’T

Multi-Function Illuminated LED in IP65 Control Box

FEATURES PEC8

PERFORMANCE PEC8 Line Pull Line Speed lbs.

kgs.

fpm

mpm

Motor amps@12v

3.9

2000

907

3.3

100

4000

1814

2.7

180

6000

2722

1.8

230

8000

3629

1.5

300

•Clockable Clutch •Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead

FEATURES SEC9.5 PERFORMANCE SEC9.5 Line Pull Line Speed lbs.

kgs.

fpm

mpm

Motor amps@12v

25.7

7.8

2000

907

15.1

4.6

150

4000

1814

10.5

3.2

210

6000

2722

7.9

2.4

270

8000

3629

5.9

1.8

320

9500

4309

4.3

1.3

375

•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

FEATURES SEC12 PERFORMANCE SEC12 Line Pull Line Speed lbs.

PAGE 18

kgs.

fpm

mpm

Motor amps@12v

2000

907

12.8

3.9

145

4000

1814

9.7

2.9

185

6000

2722

7.9

2.4

230

8000

3629

7.1

2.1

270

10000

4536

5.1

1.6

315

12000

5443

4.5

1.4

315

SPECIFICATIONS PEC8 Part Number

77-50140

Rated line pull

8,000 LBS (3,629 KG)

Gear Train

3 Stage Planetary

Gear Ratio

210:1

Motor

4.1 HP

Control Pendant

Illuminated 2-Button

Perm. Magnet (3 KW) 12V DC

X 6.22” X 8.25” Dimensions (LxWxH) 21” (533MM X 158 MM X 209.5 MM) Cable

5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

X 114MM)

ELECTRIC WINCH SYSTEMS

Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. Featuring powerful motors, illuminated controls and planetary gearing, the TOUGH SERIES winches provide expedition grade recovery and the best consumer value. Available in ranges from 6,000-12,000 pounds, integrated or independent solenoids, and both permanent magnet and series wound varieties, there is certainly a winch ready for you to Abuse World Wide™.

SPECIFICATIONS SEC9.5 Part Number

76-50246

Rated line pull

9,500 LBS (4,309 KG)

Gear Train

3 Stage Planetary

Gear Ratio

212:1

Motor

4.8 HP

Control Pendant

Illuminated 2-Button

Series Wound(3.6 KW) 12V DC

X 6.6” X 7.91” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 200 MM) Cable

3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

92 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

X 114MM)

SPECIFICATIONS SEC12 Part Number

76-50251

Rated line pull

12,000 LBS (5,443 KG)

Gear Train

3 Stage Planetary

Gear Ratio

296:1

Motor

4.8 HP

Control Pendant

Illuminated 2-Button

Series Wound(3.6 KW) 12V DC

X 6.6” X 7.91” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 200 MM) Cable

3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

92 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

X 114MM)

PAGE 19

EVERYTHING YOU NEED, NOTHING YOU DON’T

INTEGRATED SOLENOID WINCHES FEATURES SI9500 PERFORMANCE SI9500 Line Pull Line Speed lbs.

kgs.

fpm

mpm

Motor amps@12v

25.7

7.8

2000

907

15.1

4.6

150

4000

1814

10.5

3.2

210

6000

2722

7.9

2.4

270

8000

3629

5.9

1.8

320

9500

4309

4.3

1.3

375

•Integrated Housing •Illuminated Pendant •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In and Power Out •Low Electric Current •3/8 in. x 100ft CABLE •Galvanized Roller Fairlead *Heavy Duty Series Wound Motor

FEATURES SI12000 PERFORMANCE SI12000 Line Pull Line Speed lbs.

PAGE 20

kgs.

fpm

mpm

Motor amps@12v

2000

907

12.8

3.9

145

4000

1814

9.7

2.9

185

6000

2722

7.9

2.4

230

8000

3629

7.1

2.1

270

10000

4536

5.1

1.6

315

12000

5443

4.5

1.4

315

SPECIFICATIONS SI9500 Part Number

76-50147

Rated line pull

9,500 LBS (4,309 KG)

Gear Train

3 Stage Planetary

Gear Ratio

212:1

Motor

4.8 HP

Control Pendant

Illuminated 2-Button

Series Wound (3.6 KW) 12V DC

X 6.6” X 10” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 254 MM) Cable

3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

ELECTRIC WINCH SYSTEMS

X 114MM)

SPECIFICATIONS SI12000 Part Number

76-50152

Rated line pull

12,000 LBS (5,443 KG)

Gear Train

3 Stage Planetary

Gear Ratio

296:1

Motor

4.8 HP

Control Pendant

Illuminated 2-Button

Series Wound(3.6 KW) 12V DC

X 6.6” X 10” Dimensions (LxWxH) 21.6” (548mm X 160 MM X 254 MM) Cable

3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

93 lbs. (42 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

X 114MM)

PAGE 21

EVERYTHING YOU NEED, NOTHING YOU DON’T

Multi-Function Illuminated LED in IP65 Control Box

FEATURES PE6000

PERFORMANCE PE6000 Line Pull Line Speed lbs.

kgs.

fpm

mpm

Motor amps@12v

4.6

1000

454

3.3

3000

1361

2.5

100

5000

2268

1.5

145

6000

2722

4.6

1.4

170

•Illuminated Controls •Planetary Gear System •Automatic Load Holding Brake •FRP Sheath Protecting all Cables •Free Spooling •Power In & Power Out •Low Electric Current •Galvanized Roller Fairlead

lbs.

kgs.

fpm

mpm

Motor amps@12v

3.9

2000

907

3.3

100

4500

2041

2.7

180

6000

2722

1.8

230

8000

3629

1.5

300

PAGE 22

lbs.

kgs.

fpm

mpm

Motor amps@12v

4.6

3000

907

11.2

3.4

120

6000

1814

8.1

2.5

210

9000

2722

1.5

305

76-50230

Rated line pull

6,000 LBS (2,722 KG)

Gear Train

3 Stage Planetary

Gear Ratio

210:1

Motor

3.6 HP

Control Pendant

Illuminated 2-Button

Perm. Magnet (2.7 KW) 12V DC

X 6.22” X 7.28” Dimensions (LxWxH) 17.24” (438MM X 158 MM X 185 MM) 5/16” x 85’(9,800 nominal) (7.94 MM X 26.06M)

Drum Size:

2.5” (6.4 cm)/5.5” (140 Cm)

Net weight Bolt Pattern

68 lbs. (31 kg) 6.535” x 4.5”

(166MM X

114MM)

SPECIFICATIONS PE8000 Part Number

76-50240

Rated line pull

8,000 LBS (3,629 KG)

Gear Train

3 Stage Planetary

Gear Ratio

210:1

Motor

4 HP

Control Pendant

Illuminated 2-Button

Perm. Magnet (3 KW) 12V DC

X 6.22” X 8.25” Dimensions (LxWxH) 21” (533MM X 158 MM X 209.5 MM) Cable

FEATURES E9000

PERFORMANCE E9000 Line Pull Line Speed

Part Number

Cable

FEATURES PE8000

PERFORMANCE PE8000 Line Pull Line Speed

SPECIFICATIONS PE6000

ELECTRIC WINCH SYSTEMS

5/16” x 100’(9,800 nominal) (7.94 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

80 lbs. (36 kg) 10” x 4.5” (254MM (4 bolts, 3/8”)

X 114MM)

SPECIFICATIONS E9000 Part Number

76-50042

Rated line pull

9,000 LBS (4,090 KG)

Gear Train

3 Stage Planetary

Gear Ratio

210:1

Motor

4.4 HP

Control Pendant

Illuminated 2-Button

Perm. Magnet (3.35 KW) 12V DC

X 6” X 6.38” Dimensions (LxWxH) 21.45” (544MM X 152 MM X 162 MM) Cable

3/8” x 100’(14,400 nominal) (9.53 MM X 30.5M)

Drum Size:

2.5” (6.4 cm)/9” (23cm)

Net weight Bolt Pattern

84 lbs. (38.1 kg) 10” x 4.5” (254MM X 114MM)(4 bolts, 3/8”)

PAGE 23

EVERYTHING YOU NEED, NOTHING YOU DON’T

Mile Marker’s TOUGH SERIES recovery systems are trail proven winches that have been Tested to the Extreme. The PE models are a compact, battle-proven resource for your trail conquering ATV. These winches feature the no compromise, all metal construction of all other models, without the innovative control of MiFi Technology™. The TOUGH SERIES, PE winches will get down to work, and get you through your path.

FEATURES PE2500

PERFORMANCE PE2500 Line Pull Line Speed kgs. 0 227 454 680 907 1134

fpm 19.1 15.3 12.8 9 6.4 4.5

mpm 5.8 4.7 3.9 2.7 2 1.4

amps@12v 12 31 62 90 114 154

Part Number

76-50105

Rated line pull

2500 lbs. (1134 kg)

Gear Train

Planetary

Gear Ratio

153:1

Motor

.9 hp

Control Pendant

Illuminated 2-Button & Handlebar switch

Dimensions (LxWxH) Cable

Perm Magnet (.7kw ), 12 volt

13” x 5” x 5”

(330mm x 127mm x

127mm)

3/16” x 50’(4200 nominal) (4.76 MM X 15.2 M)

Drum Size:

2” (50 mm) x 2.95” (75 mm)

Net weight Bolt Pattern

24 lbs. (11.8 kg) 3” x 4.87” (76.2 mm x 124 mm) SYSTEMS

lbs. 0 500 1000 1500 2000 2500

Motor

•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor •Includes both Handle bar Switch and 12’ Wired Pendant

SPECIFICATIONS PE2500

PERFORMANCE PE3000 Line Pull Line Speed kgs.

fpm

mpm

amps@12v

76-50110

Rated line pull

3,000 lbs. (1362 kg)

Gear Train

Planetary

Gear Ratio

153:1

Motor

1.8 HP

Control Pendant

Illuminated 2-Button

Cable

Perm. magnet (1.3 kw), 12V

12.9” x 4.22” x 4.3”

(330.2mm x 107mm x 112.5mm)

3/16” x 50’(4200 nominal) (4.76 MM X 15.2 M)

800

363

2.4

Drum Size:

1.5 (38mm) x 3.2” (82mm)

1500

680

7.2

2.2

2200

1000

6.6

2.0

110

Net weight Bolt Pattern

3000

1362

4.6

1.4

145

21 lb (9.6 kg) 3 Bolt, 1.9” x 3.07” (48 mm x 78 mm)

FEATURES PE3500 •Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor

PERFORMANCE PE3500 Line Pull Line Speed PAGE 30

Part Number

Dimensions (LxWxH)

Motor

lbs.

SPECIFICATIONS PE3000

SPECIFICATIONS PE3500 Part Number Rated line pull

76-50112 3,500 lbs. (1589 kg)

Gear Train

Planetary

Gear Ratio

262:1

Motor

2 HP

Control Pendant

Illuminated 2-Button

Dimensions (LxWxH) Motor

lbs.

kgs.

fpm

mpm

amps@12v

3.7

1000

454

9.2

2.8

2000

908

7.5

2.3

3000

1362

1.5

120

3500

1589

1.2

140

WINCHING

•Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor

ATV

FEATURES PE3000

Cable

Perm. Magnet (1.5kw), 12 volt

13.4” x 4.22” x 4.3”

(340.2mm x 107mm x 112.5mm)

7/32” x 45’(5600 nominal) (5.45 MM X 13.7 M)

Drum Size:

1.5 (38mm) x 3.2” (82mm)

Net weight Bolt Pattern

23 lb (10.6 kg) 1.9” x 3.07” (48 mm x 78 mm)

PAGE 31

Utility Winches FEATURES PE2000

PERFORMANCE PE2000 Line Pull Line Speed kgs. 0 454 680 907

fpm 14 9 7.5 5.9

mpm 4.3 2.7 2.3 1.8

amps@12v 14 60 90 115

Part Number

76-50100

Rated line pull

2,000 lbs. (907 kg)

Gear Train

Planetary

Gear Ratio

153:1

Motor

1.5 hp

Control Pendant

2-Button

Dimensions (LxWxH) Cable

Perm Magnet (1kw) 12V

12.2” x 4.13” x 4.35” (309mm x 105mm x

111mm)

5/32” x 50’ (4200 nominal) (4 MM X 15.2 M)

Drum Size:

2.56”(65 mm) x 2.86” (72.6 mm)

Net weight Bolt Pattern

15 lb (6.6 kg) T-Shaped 3” (76.2mm) x 1.9” (48.3mm)

ATV

lbs. 0 1000 1500 2000

Motor

SPECIFICATIONS PE2000

SYSTEMS

Mile Marker’s TOUGH SERIES recovery systems have you covered from the trail, to the trailer, and from the clay to the construction site. These utility winches have infinite uses, and you can count on them to get the job done over and over again.

WINCHING

EVERYTHING YOU NEED, NOTHING YOU DON’T

FEATURES PE4500 •Illuminated Controls •Planetary Gear System •Dynamic Brake •Free Spooling •Power In & Power Out •Low Electric Current •Heavy Duty Permanent Magnet Motor

PERFORMANCE PE4500 Line Pull Line Speed

PAGE 32

SPECIFICATIONS PE4500 Part Number Rated line pull

76-50115 4,500 lbs. (2,043 kg)

Gear Train

Planetary

Gear Ratio

294:1

Motor

1.9 HP

Control Pendant

Illuminated 2-Button

Dimensions (LxWxH) Motor

lbs.

kgs.

fpm

mpm

amps@12v

4.3

1500

680

6.6

2200

998

5.2

1.6

100

3000

1361

4.6

1.4

145

4500

2041

3.3

170

Cable

Perm. Magnet(1.4kw), 12 volt

17.16” x 6.2” x 7.3”

(436mm x 152mm x 185mm)

1/4” x 85’(7000 lbs. nominal)(5.45 MM X 13.7 M)

Drum Size:

2.5 (63mm) x 5.5” (140mm)

Net weight Bolt Pattern

51 lb (23 kg) 6.535” x 4.5” (166 mm x 114.3 mm)

PAGE 33