Available NATIONWIDE
Hire Desk: 0870 240 2381
TPA Product Profile
This versatile RRAP system features a patented corundum surface structure which enhances traction under wet conditions. tapSTRAIL® will fit a great variety of rail and sleeper configurations.
Rapid Rail Access
Further TPA RRAP System details can be found at; www.tpa-rrap.com
Network Rail Approved, tapSTRAIL®, the versatile solution for temporary crossings & rail access. TPA is firmly established in the rail sector as “the” principle provider of safe, effective, value for money temporary roadways, walkways & access systems. The tapSTRAIL® rail track access system is a further new addition to TPA’s range of portable access equipment and represents a proven solution for road rail vehicle track access and for temporary crossings on project work. The 90cm panels are quick to install and are independent of sleeper spacing. The Benefits The system comprises of one inner panel (900mm) and one outer panel (900mm), which are supplied in individual sections to suit most line & project size needs and can be easily adapted for each site using packing (timber or rubber). The tapSTRAIL® system provides the following benefits; 1. For use on Live Rail Lines - Fast, easy & reliable installation and removal 2. Easily adapted to fit different sleeper types with flat bottom rail 3. Network Rail Approval Number (PA05/00475) 4. London Underground Approval Number (2121) 5. Inner panels cut in to two halves to aid with manual installation and removal 6. Gap free design, anti vandal construction, secure lock tight tie rod system.
tapSTRAIL® RRAP
TPA Rapid Rail Access System
tapSTRAIL® Specifications Dimensions (inner panel) • Length: 900mm • Width: adapted to gauge width 1435mm • Thickness: 171mm; adaption to sleeper shape by rubber strip packing Dimensions (outer panel) • Length: 900mm • Width: 591mm • Thickness: 147mm; adaption to sleeper shape by rubber strip packing Configuration & Sizing • The system is supplied in individual 900mm sections to suit most line & project size needs and can be easily adapted for each site using packing (timber or rubber). Material • Recycled rubber based on natural and synthetic rubber with an additional surface layer made of virgin rubber, to protect against wear and tear. Characteristics • flange groove 60mm form fitting tongue/groove connection of panels • screw connection of all panels by patented lock tight system • top surface with pyramid structure to enhance water draining / corun dum in surface to improve slip resistance. horizontal drainability on surface (efflux meter acc. to Moore) • < 1 sec. (specified value acc. “ZTV AsphaltStB 01”: ≤ 30 sec.)
© 2015 TPA Portable Roadways Limited All Rights reserved Specifications are subject to change without notice Trademarks are the property of TPA Portable Roadways Limited or their respective owners.
W:
www.tpa-rrap.com
T:
0870 240 2381
Highlights Innovative Solution
1. Suitable for use with most sleeper types and bullhead rails. 2. Sleeper spacing independent utilising spacing as found on site. 3. Inner panels cut in to two halves means that the panels can be manually installed or removed with out the use of mechanical lifting.
Protective
1. Highly wear resistant surface due to embedded mineral grit. 2. Gap free, anti vandal, lock tight tie rod system. 3. Virtually maintenance free. Fit and forget.
Strengths
1. Fast, easy installation. 2. No more track circuit failures due to excellent electrical insulation properties of the rubber panels. 3. Noise and vibration reduction due to shock absorbing properties of rubber.
RISQS Registered Supplier Number 058540
Document Issue date 16/07/15 Document Version 1.3
E:
rrap@tpa-ltd.co.uk