Available for Hire NATIONWIDE
Hire Desk: 0870 240 2381
TPA Product Profile
Flood Barrier Hire. The TPA Flood Barrier protects critical infrastructure, people and the environment.
Further TPA Flood Barrier Product details can be found at; www.tpa-pontoons.com
Flood Barrier
TPA’s Flood Barrier can be installed in a very short time using only limited resources providing maximum efficiency in any deployment situation. TPA’s Flood Barrier solution offers professional, flexible and cost-efficient, large-scale flood protection. The Barrier can be deployed on all surfaces (such as but not limited to sand, grass, asphalt and concrete) and in almost any configuration (circles, 45 degree turns, 90 degree turns etc.) The Barrier can be delivered in modules ranging from 50meters to 200meters and in four standard heights. Each section can be continuously extended by the interconnection of special junctions to create an almost infinite length/ prolongation of the barrier to suit your installation and project. This solution is made for high volume pumps and 1km of the flood barrier can be filled from just one access point. Key Features: • Easy and rapid deployment • Multiple applications • Fights water with water • Takes up minimal storage • Not for permanent installations • Low environmental impact • Modular system • Robust and highly reliable materials • Easy removal
Flood Barrier
TPA Pontoons
Barrier Specifications
Innovative Solution
Dimensions & Weights •
Highlights • EASY TO USE AND MAINTENANCE FREE FLOOD BARRIERS
Product Dimensions
• NO OPEN AREAS TO ALLOW SPILLS THROUGH. • MODULAR FORM TO MEET YOUR BESPOKE SIZE & CONFIGURATION REQUIREMENTS.
Terminals & Junction The TPA Flood Barrier solution uses terminals and junctions made from lightweight aluminum providing stability and facilitating easy prolongation and “one-point” filling with high volume pumps.
TPA FloodBox Pro ‘Ready to Go’
Material The Barrier Tubes are made from high strength materials and composed to create double layered flexible and damage tolerant structure. TPA FloodTrail Pro ‘Ready to Go’ The double layer consists of a structural layer which is a special type of woven Polypropylene that gives it a high tensile strength and a water retention layer which is a high strength Polyethylene structure with high puncture resistance. This special woven structure also makes it resistant to tear propagation meaning that should a tear or puncture happen this will not expand hence resisting structural collapse of the barrier. Membrane The solution also offers the option to connect a membrane for extra resistance. Due to the innovative design even big damages to the tube structure will not lead to collapse and instability of the barrier but will leave sufficient time to make adequate corrections.
The FloodTrail & FloodBox PRO “ready to Go” Solutions are complete and boxed / trailer based “ready to go” flood protection. These contained systems both contain the PRO barrier solution and all necessary equipment for deployment.
© 2016 TPA Portable Roadways Limited All Rights reserved Specifications are subject to change without notice Trademarks are the property of TPA Portable Roadways Limited or their respective owners.
W: www.tpa-pontoons.com
T: 0870 240 2381
Product Design Protected by Patent(s) Document Issue date:28/10/16 Document Version: 1.1
E: pontoons@tpa-ltd.co.uk