ROUTER BITS MADE IN MARION, NC SINCE 1975 TOOLCO INDUSTRIAL CORPORATION produces a large line of slot cutters, carbide tipped router bits, solid surface bits and solid carbide router bits. We have been producing high quality tools since 1975 at our facility in Marion, North Carolina.
ABOUT US
Toolco has been selling under private labels to national and international OEM tool and OEM equipment manufacturers. These national and international companies have sold our private label woodworking tools to nationwide home improvement stores, nationwide hardware stores and nationwide lumber stores in large volumes for many years. Our products are also sold to other distributors and catalog companies. These tools are used for industrial applications, furniture manufacturing, cabinet manufacturing, solid surface applications, professional woodworking applications, RV and Manufactured Home industries, and woodworking by hobbyists. Toolco’s mission is to maintain a commitment to provide quality products and dependable service at very affordable prices. Our long-time commitment to high standards in workmanship and service has led to long-term business relationship with our customers. Please feel free to inquire about tooling not shown in this catalog. We have manufactured over 1100 SKUs of solid carbide router bits, 600+ SKUs of carbide tipped router bits and slot cutters. New tooling is continuously being developed to appear in future catalogs. We have the flexibility to provide the cutting tools that meet your needs at attractive prices. We look forward to serving you! Phone: 828-652-2273 Fax: 828-625-1850 Email: toolco@toolcobits.com
Shipping Addresses: UPS:
106 INDUSTRIAL DR. MARION, NC 28752
POST OFFICE:
P.O. BOX 996 MARION, NC 28752
NO PORTION OF THE CATALOG MAY BE REPRODUCED WITHOUT WRITTEN PERMISSION FROM TOOLCO INDUSTRIAL CORPORATION IN MARION,NC. © 2010 TOOLCO INDUSTRIAL CORPORATION
2
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
SOLID CARBIDE BITS
7째 BEVEL TRIM.............................................................................. 5 FLUSH TRIM . ................................................................................ 5 DADO BIT....................................................................................... 5 HOLE AND FLUSH TRIM............................................................... 5 FLUSH AND 7째 BEVEL TRIM - DOUBLE END............................. 5 FLUSH AND 7째 BEVEL TRIM......................................................... 5 V-GROOVE..................................................................................... 5 RIP AND SLOTTING....................................................................... 5 ROUND BOTTOM VEINING, 1 FLUTE.......................................... 6 ROUND BOTTOM VEINING, 2 FLUTE.......................................... 6 FLAT BOTTOM VEINING............................................................... 6 BALL NOSE UPCUT...................................................................... 6 BALL NOSE TAPERED UPCUT BIT.............................................. 6 ROUND BOTTOM VEINING, 2 FLUTE.......................................... 6 SOLID CARBIDE DOVETIAL BIT.................................................. 6 FIBERGLASS BIT........................................................................... 6 SINGLE FLUTE STRAIGHT BIT.................................................... 6 DOUBLE FLUTE STRAIGHT BIT................................................... 7
SOLID CARBIDE FOR PLASTICS
O FLUTE SLOW SPIRAL BIT, 2 FLUTE........................................ 7 O FLUTE STRAIGHT BIT, 1 FLUTE............................................... 7 O FLUTE STRAIGHT BIT, 2 FLUTE............................................... 7 O FLUTE UPCUT SPIRAL, 1 FLUTE (SOFT PLASTIC)................ 7 O FLUTE UPCUT SPIRAL, 1 FLUTE (HARD PLASTIC)............... 8 O FLUTE DOWNCUT SPIRAL, 1 FLUTE (SOFT PLASTIC)......... 8 O FLUTE DOWNCUT SPIRAL, 1 FLUTE (HARD PLASTIC)........ 8 O FLUTE LOW HELIX UPCUT SPIRAL, 2 FLUTE........................ 8 O FLUTE HIGH HELIX UPCUT SPIRAL, 2 FLUTE....................... 8 O FLUTE ROUNDING EDGE STRAIGHT BIT, 1 FLUTE............... 8 O FLUTE ROUNDING EDGE SPIRAL, 1 FLUTE.......................... 8 O FLUTE ROUNDING EDGE STRAIGHT BIT, 2 FLUTE............... 9
SOLID CARBIDE SPIRALS
2 FLUTE DOWNCUT...................................................................... 9 2 FLUTE UPCUT........................................................................... 10 2 FLUTE DOWNCUT FOR MDF................................................... 10 2 FLUTE UPCUT FOR MDF......................................................... 10 2 FLUTE DOWNCUT CHIPBREAKERS...................................... 11 2 FLUTE UPCUT CHIPBREAKERS............................................. 11 2 FLUTE DOWNCUT CHIPBREAKER FOR MDF....................... 11 2 FLUTE UPCUT CHIPBREAKER FOR MDF.............................. 11 2 FLUTE DOWNCUT, LEFT HAND.............................................. 12 2 FLUTE UPCUT, LEFT HAND..................................................... 12 2 FLUTE FLUSH TRIM DOWNCUT SPIRAL............................... 12 2 FLUTE FLUSH TRIM UPCUT SPIRAL...................................... 12 3 FLUTE DOWNCUT.................................................................... 12 3 FLUTE UPCUT........................................................................... 12 3 FLUTE DOWNCUT CHIPBREAKERS...................................... 13 3 FLUTE UPCUT CHIPBREAKERS............................................. 13 3 FLUTE SLOW SPIRAL DOWNCUT.......................................... 13 3 FLUTE SLOW SPIRAL UPCUT................................................. 13 3 FLUTE DOWNCUT ROUGHER................................................. 13 3 FLUTE UPCUT ROUGHER....................................................... 14 3 FLUTE SLOW SPIRAL DOWNCUT ROUGHER....................... 14 3 FLUTE SLOW SPIRAL UPCUT ROUGHER............................. 14 4 FLUTE DOWNCUT FINISH/ROUGHER.................................... 14 4 FLUTE UPCUT FINISH/ROUGHER.......................................... 14
SOLID CARBIDE COMPRESSIONS
1+1 COMPRESSION.................................................................... 14 1+1 COMPRESSION, LEFT HAND.............................................. 15 2+2 COMPRESSION, MORTISE.................................................. 15 2+2 COMPRESSION.................................................................... 15 Fax: 828-652-1850
2+2 COMPRESSION FOR MDF................................................... 15 2+2 COMPRESSION W/ CHIPBREAKERS................................. 15 2+2 COMPRESSION, LEFT HAND.............................................. 16 3+3 COMPRESSION.................................................................... 16 3+3 COMPRESSION W/ CHIPBREAKERS................................. 16 4+4 COMPRESSION.................................................................... 16 4+4 COMPRESSION MORTISE................................................... 16 4+4 COMPRESSION FINISH/ROUGHER.................................... 16
CARBIDE TIPPED BITS
SINGLE FLUTE STRAIGHT BIT ................................................. 17 DOUBLE FLUTE STRAIGHT BIT................................................. 17 DOUBLE FLUTE STRAIGHT BIT, CONT..................................... 18 DOUBLE FLUTE TEMPLATE STRAIGHT BIT............................ 18 DOUBLE FLUTE STRAIGHT BIT................................................. 18 DOUBLE FLUTE TEMPLATE STRAIGHT BIT............................ 18 2 FLUTE DOWNSHEAR STRAIGHT BIT..................................... 18 SINGLE FLUTE PANEL PILOT.................................................... 19 DOUBLE FLUTE PANEL PILOT.................................................. 19 STAGGERTOOTH PANEL BIT..................................................... 19 STAGGERTOOTH BIT.................................................................. 19 FLUSH TRIM BIT, 1 AND 2 FLUTE.............................................. 19 FLUSH TRIM BIT, 3 FLUTE.......................................................... 19 FLUSH TRIM BIT, DOUBLE BEARING........................................ 20 EURO TRIM BIT............................................................................ 20 BEVEL TRIM BIT, CT.................................................................... 20 FLUSH AND BEVEL, CT.............................................................. 20 BEADING PICTURE FRAME MOLDING BIT............................... 20 BORING POINT ROUNDOVER.................................................... 20 BORING POINT ROUNDOVER AND EDGE TRIM...................... 21 BULLNOSE . ................................................................................ 21 BULLNOSE W/ BEARING............................................................ 21 BEAUTY MOLDING BIT............................................................... 21 CHAIRMAT BIT............................................................................. 21 CHAMFER BIT.............................................................................. 22 CLASSICAL BIT........................................................................... 22 CORE BOX BIT............................................................................. 22 ROUND NOSE BIT....................................................................... 22 CHAMFER BIT.............................................................................. 22 CROWN MOLDING EDGE TRIM.................................................. 23 SLOT AND UNDERCUT BIT........................................................ 23 SLOTTING AND RABBETING BIT.............................................. 23 MDF PROFILE BIT....................................................................... 23 DOOR EDGE BIT.......................................................................... 24 DOOR EDGE PROFILE................................................................ 24 DOUBLE ROUNDOVER............................................................... 24 DOOR EDGE BIT.......................................................................... 24 DODDS DOVETAIL BIT................................................................ 25 ELLIPSE OGEE BIT..................................................................... 25 FURNITURE/BOX MAKER BIT.................................................... 25 FACE FRAME BIT........................................................................ 25 FINGER JOINT BIT....................................................................... 25 GLUE JOINT BIT.......................................................................... 25 HANG GRIP BIT........................................................................... 26 LOCK MITER BIT, 22.5 DEG........................................................ 26 LOCK MITER BIT, 45 DEGREE.................................................... 26 LOCKING DRAWER GLUE JOINT.............................................. 26 OGEE BIT..................................................................................... 26 OGEE FILLET BIT........................................................................ 26 OVERHANG BIT........................................................................... 27 MORTISE BIT............................................................................... 27 PICTURE FRAME BIT.................................................................. 27 RABBETING BIT.......................................................................... 27 ROUNDING EDGE BEADING BIT............................................... 27 MEDIUM RAISED PANEL BIT...................................................... 28
www.toolcobits.com
Phone: 828-652-2273
3
TABLE OF CONTENTS
Table of Contents
ROUTER BITS MADE IN MARION, NC SINCE 1975 BEADING BIT............................................................................... 28 ROUNDOVER BIT........................................................................ 28 SPECIALTY MOLDING BIT.......................................................... 29 TRIPLE FLUTE BIT...................................................................... 29 TONGUE AND GROOVE.............................................................. 29 V-GROOVE BIT, 60 DEG.............................................................. 29 V-GROOVE BIT, 90 DEG.............................................................. 29 V-GROOVE BIT, 120 DEG............................................................ 29
TABLE OF CONTENTS
SOLID SURFACE BITS
SOLID SURFACE BOWL BIT....................................................... 30 SOLID SURFACE OGEE BOWL BIT........................................... 30 SOLID SURFACE BEVEL BIT...................................................... 30 SOLID SURFACE FLUSH TRIM BIT............................................ 30 SOLID SURFACE FLUSH TRIM BIT............................................ 31 SOLID SURFACE OVERHANG TRIM BIT................................... 31 SOLID SURFACE OVERHANG TRIM BIT................................... 31 SOLID SURFACE STAGGERED OVERHANG TRIM BIT........... 31 SOLID SURFACE FLUSH TRIM BIT............................................ 31 SOLID SURFACE VERTICAL NO DRIP BIT................................ 31 SOLID SURFACE NO DRIP BIT................................................... 32 SOLID SURFACE DRAINBOARD BIT......................................... 32 SOLID SURFACE UNDER ROUNDING BIT................................ 32 SOLID SURFACE ROUNDOVER BIT.......................................... 32 SOLID SURFACE INLAY BIT....................................................... 32 SOLID SURFACE DOVETAIL REPAIR BIT................................. 33 SOLID SURFACE ROUNDOVER BIT.......................................... 33 SOLID SURFACE 4 WING BOWL REMOVAL BIT...................... 33 SOLID SURFACE PLUG CUTTER SET....................................... 33 SOLID SURFACE PROFILE BIT.................................................. 33
DOOR BITS
2 WING DOOR DRILL BIT............................................................ 35 3 WING DOOR DRILL BIT............................................................ 35
DOOR KNOB BIT......................................................................... 35 3 WING DOOR KNOB BIT............................................................ 35 LATCH BORE WITH SHANK....................................................... 35 LATCH BORE WITH THREADED END....................................... 35 HIGH SPEED STEEL DOORLITE BIT......................................... 36 DOORLITE BIT, CT STRAIGHT BIT............................................. 36
SLOT CUTTERS
2 WING SLOT CUTTERS............................................................. 36 3 WING COUNTERBORE SLOT CUTTERS................................ 36 3 WING SLOT CUTTERS............................................................. 36 4 WING SLOT CUTTERS............................................................. 37 TOPMASTER SLOT CUTTERS................................................... 37 DRAWER SLOT CUTTERS.......................................................... 37 JEMCO SLOT CUTTERS............................................................. 37 SLOT CUTTER ARBORS . ......................................................... 37 JEMCO ARBORS......................................................................... 37
BORING BITS
BRAD POINT,RH.......................................................................... 38 BRAD POINT,LH........................................................................... 38 THROUGH HOLE V-POINT, RH................................................... 38 THROUGH HOLE V-POINT, LH.................................................... 38 HINGE BIT,RH............................................................................... 38 HINGE BIT,LH............................................................................... 38
ACCESSORIES
BEARINGS.................................................................................... 39 DELRIN BEARINGS..................................................................... 39 ARBORS ...................................................................................... 39 LOCKING COLLARS.................................................................... 39 DUST SHIELDS............................................................................ 39 SCREWS....................................................................................... 39
Product Guarantee:
Toolco guarantees its products against defects in workmanship and materials. We limit our guarantee to replacement of defective products. Defective products must be returned to Toolco in Marion, NC. We do not guarantee solid carbide against breakage.
Returned Goods Policy:
Toolco does not normally accept returned goods. Authorization numbers must be issued by Toolco prior to returning any tooling. Restocking fees will be charged for returned tooling.
Safety Recommendations:
Carefully read before allowing the use of our products. Proper safety operation of our products is solely the responsibility of the operator. We strolnly encourage the use of eye protection, hearing protectionand respiratory protection dureing use. Always inspect tools for defects prior to use. Never allow body contact or clothing contact with the tools during use. Disconnet power sources when changing tools and when tooling is not attended by an experienced operator. Users should seek training for safe use and research all Federal and state laws and regulations covering the safety requirements of cutting tools. Toolco Inustrial Corporation dose not assume nay responsibility for defects, damage or injury caused by misuse, abuse, alteration or sharpening of any of our products. The grinding of carbide can be hazardous to your health.
Freight Policy:
Shipment is normally made via UPS, F.O.B Marion, NC. Shipments are insured only for the sales price. Claims for goods damaged during shipment should be filed directly with the carrier. Other methods of shipment are available, upon request.
4
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 SOLID CARBIDE BITS PART # CED CEL BT-140 1/4” 1/4” BT-140-BLK 1/4” 1/4” BT-140-LH 1/4” 1/4” NOTE: BT-140-BLK is a 100 quantity pack
SHANK 1/4” 1/4” 1/4”
OAL 1-1/2” 1-1/2” 1-1/2”
SHANK 1/4” 1/4” 1/4” 1/4”
OAL 1-1/2” 1-1/2” 1-1/2” 2”
CEL 1/4” 1/4” 3/8”
SHANK 1/4” 1/4” 1/4”
OAL 1-1/2” 1-1/2” 1-1/2”
ANGLE FLUSH 7 DEG FLUSH
CEL 5/16” 3/8” 1/4”
SHANK 1/4” 1/4” 1/4”
OAL 2” 1-1/2” 1-1/2”
ANGLE 45 DEG 45 DEG 45 DEG
FLUSH TRIM
PART # CED CEL FT-140 1/4” 1/4” FT-140-BLK 1/4” 1/4” FT-380 1/4” 3/8” FT-3802 1/4” 3/8” NOTE: FT-140-BLK is a 100 quantity pack
DADO BIT
PART # DT-140 DT-SPECIAL DT-380
CED 1/4” 1/4” 1/4”
HOLE AND FLUSH TRIM PART # HFT-140 HFT-140A HFT-140B
CED 1/4” 1/4” 1/4”
FLUSH AND 7° BEVEL TRIM - DOUBLE END PART # BTDE-140 FTDE-140
CED 1/4” 1/4”
CEL 1/4” 1/4”
SHANK 1/4” 1/4”
OAL 2” 2”
ANGLE 7 DEG FLUSH
CED 1/4”
CEL 3/8”
SHANK 1/4”
OAL 1-1/2”
ANGLE 7 DEG
CED 1/8” 1/4” 1/4” 1/4”
CEL 1/2” 1/8” 7/32” 7/32”
SHANK 1/8” 1/4” 1/4” 1/4”
OAL 2-1/2” 1-1/2” 1-1/2” 2-1/2”
ANGLE 60 DEG 90 DEG 60 DEG 60 DEG
CED 1/4”
CEL 3/8”
SHANK 1/4”
OAL 1-1/2”
FLUSH AND 7° BEVEL TRIM PART # FBT-140
V-GROOVE PART # VG-180D VG-140 VG-140A VG-140B-60
RIP AND SLOTTING PART # RS-140
Fax: 828-652-1850
ANGLE 7 DEG 7 DEG 7 DEG
www.toolcobits.com
Phone: 828-652-2273
PL 1/8” 1/8” 1/8”
SOLID CARBIDE
7° BEVEL TRIM
5
ROUTER BITS MADE IN MARION, NC SINCE 1975 ROUND BOTTOM VEINING, 1 FLUTE PART # RB-180 RB-140
CED 1/8” 1/4”
CEL 1/4” 1/4”
SHANK 1/4” 1/4”
OAL 1-1/2” 2”
RAD 1/16” 1/8”
CEL 5/16” 3/8” 3/8” 3/4”
SHANK 1/4” 1/4” 1/4” 1/2”
OAL 2” 2” 2” 2-1/2”
RAD 1/16” 3/32” 1/8” 1/4”
CED 1/8” 3/32”
CEL 1/4” 5/16”
SHANK 1/4” 1/4”
OAL 2” 1-1/2”
CED 1/8” 3/16” 1/4” 3/8” 1/2” 1/2” 3/4”
CEL 1/2” 3/4” 3/4” 1” 1-1/4” 2” 2”
SHANK 1/4” 1/4” 1/4” 3/8” 1/2” 1/2” 3/4”
OAL 2” 2” 2-1/2” 3” 3” 4” 4”
ROUND BOTTOM VEINING, 2 FLUTE PART # CB-180A CB-316A CB-140A CB-120
CED 1/8” 3/16” 1/4” 1/2”
FLAT BOTTOM VEINING PART # SC-180B SC-332
BALL NOSE UPCUT
SOLID CARBIDE
PART # SCUSB-180 SCUSB-316 SCUSB-140-.750 SCUSB-380 SCUSB-120A SCUSB-120C-2 SCUSB-340A-2
BALL NOSE TAPERED UPCUT BIT PART # SCTB-180-7D SCTB-180-5D SCTB-180-3D SCTB-180-1D SCTB-140-7D SCTB-140-5D SCTB-140-3D
CED 1/8” 1/8” 1/8” 1/8” 1/4” 1/4” 1/4”
CEL 1/2” 3/4” 1” 1-1/2” 1” 1-3/8” 2”
ROUND BOTTOM VEINING, 2 FLUTE PART # SCV-116C
CED 1/16”
FIBERGLASS BIT PART # SCFGF-140-78V SCFG-120A-EM
CED 1/4” 1/2”
SINGLE FLUTE STRAIGHT BIT PART # SC-116-SF SC-180-SF SC-140-SF SC-140A-SF
6
Phone: 828-652-2273
CED 1/16” 1/8” 1/4” 1/4”
OAL 3” 3” 3” 3” 4” 4” 4”
RAD 1/16” 1/16” 1/16” 1/16” 1/8” 1/8” 1/8”
ANGLE 7° 5° 3° 1° 7° 5° 3°
CEL 1/2”
SHANK 1/4”
OAL 2-1/2”
CEL 9.5 MM 8 MM 8 MM
SHANK 14 MM 14 MM 14 MM
OAL 60 MM 60 MM 60 MM
ANGLE 10 DEG 10 DEG 10 DEG
CEL 7/8” 1”
SHANK 1/4” 1/2”
OAL 2-1/2” 3”
TEETH FINE FINE
CEL 1/4” 3/8” 3/4” 1”
SHANK 1/4” 1/4” 1/4” 1/4”
OAL 1-1/2” 1-1/2” 2” 2-1/2”
SOLID CARBIDE DOVETIAL BIT PART # CED SCDTUS-14MM-10D 14 MM SCDTUS-1375MMR 13.75 MM SCDTUS-1375MML 13.75 MM
SHANK 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2”
RAD 1/16” 3/32” 1/8” 3/16” 1/4” 1/4” 3/8”
www.toolcobits.com
Fax: 828-652-1850
FLUTES 3 3 3 3 2 2 2
ROTATION RIGHT-HAND RIGHT-HAND LEFT-HAND
END TYPE Plunge V Pt End End Mill End
ROUTER BITS MADE IN MARION, NC SINCE 1975 DOUBLE FLUTE STRAIGHT BIT PART # SC-332 SC-180 SC-180A SC-180B SC-532 SC-532-RD2 SC-316 SC-316A SC-316B SC-732 SC-140 SC-140C SC-140A SC-140B SC-516 SC-380-ROD2.5 SC-380 SC-380A SC-120 SC-120A SC-120B
CED 3/32” 1/8” 1/8” 1/8” 5/32” 5/32” 3/16” 3/16” 3/16” 7/32” 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2”
CEL 5/16” 3/8” 13/32” 1/4” 3/8” 3/8” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1” 1-1/4” 1-1/8” 1-1/4” 1-5/8”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2”
OAL 1-1/2” 1-1/2” 2” 2” 1-1/2” 2” 1-1/2” 2” 2” 2” 2” 2-1/2” 2-1/2” 3” 3” 2 1/2” 3” 3” 3” 3” 3-1/2”
SHANK 1/4” 1/4”
OAL 2-1/2” 2-1/2”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 1/2” 1/2”
OAL 2” 4” 2” 4” 3-1/4” 4” 6” 3” 6”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 1/2”
OAL 2” 4” 2” 2” 4” 2-1/2” 3-1/4” 4” 2-1/2” 4” 3”
O FLUTE SLOW SPIRAL BIT, 2 FLUTE PART # SCODSS-140A SCOUSS-140A
CED 1/4” 1/4”
CEL 3/4” 3/4”
O FLUTE STRAIGHT BIT, 1 FLUTE PART # SCO1-180A SCO1-180B SCO1-316A SCO1-316D SCO1-140B SCO1-140D SCO1-380F SCO1-120B SCO1-120F
CED 1/8” 1/8” 3/16” 3/16” 1/4” 1/4” 3/8” 1/2” 1/2”
CEL 1/2” 5/8” 5/8” 1” 3/4” 1-1/4” 1-5/8” 1” 2-1/8”
O FLUTE STRAIGHT BIT, 2 FLUTE PART # SCO2-180A SCO2-180B SCO2-316 SCO2-316A SCO2-316D SCO2-140A SCO2-140C SCO2-140D SCO2-380A SCO2-380C SCO2-120B
CED 1/8” 1/8” 3/16” 3/16” 3/16” 1/4” 1/4” 1/4” 3/8” 3/8” 1/2”
CEL 1/2” 5/8” 3/8” 5/8” 1” 1” 1” 1-1/4” 7/8” 1” 1”
O FLUTE UPCUT SPIRAL, 1 FLUTE (SOFT PLASTIC) PART # SCOMS-U-180B SCOMS-U-180D SCOMS-U-316B SCOMS-U-316D SCOMS-U-140B SCOMS-U-140D SCOMS-U-140G SCOMS-U-380B SCOMS-U-380F SCOMS-U-380H SCOMS-U-120B
Fax: 828-652-1850
CED 1/8” 1/8” 3/16” 3/16” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2”
CEL 1/4” 1/2” 3/8” 5/8” 3/8” 3/4” 1-1/4” 5/8” 1-1/8” 1-5/8” 1-5/8”
www.toolcobits.com
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2”
SOLID CARBIDE FOR PLASTICS
SOLID CARBIDE FOR PLASTICS CUT DOWNCUT UPCUT
OAL 2” 2” 2” 2” 2” 2-1/2” 3” 2-1/2” 3” 3-1/2” 3-1/2”
Phone: 828-652-2273
7
ROUTER BITS MADE IN MARION, NC SINCE 1975 O FLUTE UPCUT SPIRAL, 1 FLUTE (HARD PLASTIC) PART # SCOMH-U-180B SCOMH-U-180D SCOMH-U-316B SCOMH-U-316D SCOMH-U-140B SCOMH-U-140D SCOMH-U-140G SCOMH-U-380B SCOMH-U-380F SCOMH-U-380H SCOMH-U-120B
CED 1/8” 1/8” 3/16” 3/16” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2”
CEL 1/4” 1/2” 3/8” 5/8” 3/8” 3/4” 1-1/4” 5/8” 1-1/8” 1-5/8” 1-5/8”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2”
OAL 2” 2” 2” 2” 2” 2-1/2” 3” 2-1/2” 3” 3-1/2” 3-1/2”
O FLUTE DOWNCUT SPIRAL, 1 FLUTE (SOFT PLASTIC) PART # SCOMS-D-180D SCOMS-D-316D SCOMS-D-140D SCOMS-D-140G SCOMS-D-380F SCOMS-D-120B
CED 1/8” 3/16” 1/4” 1/4” 3/8” 1/2”
CEL 1/2” 5/8” 3/4” 1-1/4” 1-1/8” 1-5/8”
SHANK 1/4” 1/4” 1/4” 1/4” 3/8” 1/2”
OAL 2” 2” 2-1/2” 3” 3” 3-1/2”
SOLID CARBIDE FOR PLASTICS
O FLUTE DOWNCUT SPIRAL, 1 FLUTE (HARD PLASTIC) PART # SCOMH-D-180D SCOMH-D-316D SCOMH-D-140D SCOMH-D-140G SCOMH-D-380F SCOMH-D-120B
CED 1/8” 3/16” 1/4” 1/4” 3/8” 1/2”
CEL 1/2” 5/8” 3/4” 1-1/4” 1-1/8” 1-5/8”
SHANK 1/4” 1/4” 1/4” 1/4” 3/8” 1/2”
O FLUTE LOW HELIX UPCUT SPIRAL, 2 FLUTE PART # SCOS-UL-140 SCOS-UL-140A SCOS-UL-380-1 SCOS-UL-120 SCOS-UL-120B SCOS-UL-120C
CED 1/4” 1/4” 3/8” 1/2” 1/2” 1/2”
CEL 3/8” 3/4” 1” 1-1/8” 1-5/8” 2-1/8”
SHANK 1/4” 1/4” 3/8” 1/2” 1/2” 1/2”
O FLUTE HIGH HELIX UPCUT SPIRAL, 2 FLUTE PART # SCOS-UF-140 SCOS-UF-140C SCOS-UF-380B SCOS-UF-380D SCOS-UF-120C SCOS-UF-120E
CED 1/4” 1/4” 3/8” 3/8” 1/2” 1/2”
CEL 3/8” 1-1/4” 1” 1-1/2” 1-1/4” 2-1/8”
SHANK 1/4” 1/4” 3/8” 3/8” 1/2” 1/2”
OAL 2” 2” 2-1/2” 3” 3” 3-1/2”
OAL 2-1/2” 2-1/2” 3” 3-1/2” 3-1/2” 4-1/2”
OAL 2-1/2” 3” 3” 4” 4” 4”
O FLUTE ROUNDING EDGE STRAIGHT BIT, 1 FLUTE PART # SCOR1-140-18 SCOR1-140-316 SCOR1-140-14
CED 1/4” 1/4” 1/4”
CEL 3/8” 3/8” 3/8”
SHANK 1/4” 1/4” 1/4”
OAL 2-1/2” 2-1/2” 2-1/2”
O FLUTE ROUNDING EDGE SPIRAL, 1 FLUTE PART # SCORS-140-18 SCORS-140-316 SCORS-140-14
8
Phone: 828-652-2273
CED 1/4” 1/4” 1/4”
CEL 3/8” 3/8” 3/8”
SHANK 1/4” 1/4” 1/4”
www.toolcobits.com
OAL 2-1/2” 2-1/2” 2-1/2”
OPENING 5/32” 7/32” 9/32”
RAD 1/8” 3/16” 1/4”
CEL 2 PLASTIC SIZE 1/16” 1/8” 1/16” 3/16” 1/16” 1/4”
OPENING 5/32” 7/32” 9/32”
RAD 1/8” 3/16” 1/4”
CEL 2 PLASTIC SIZE 1/16” 1/8” 1/16” 3/16” 1/16” 1/4”
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 O FLUTE ROUNDING EDGE STRAIGHT BIT, 2 FLUTE PART # SCOR2-140-18 SCOR2-140-316 SCOR2-140-14
CED 1/4” 1/4” 1/4”
CEL 3/8” 3/8” 3/8”
SHANK 1/4” 1/4” 1/4”
OAL 2-1/2” 2-1/2” 2-1/2”
OPENING 5/32” 7/32” 9/32”
RAD CEL 2 PLASTIC SIZE 1/8” 1/16” 1/8” 3/16” 1/16” 3/16” 1/4” 1/16” 1/4”
SOLID CARBIDE SPIRALS PART # SCDS-332 SCDS-180-W SCDS-532A-W SCDS-316-W SCDS-316-W-R25 SCDS-732 SCDS-140A-3/4-W SCDS-140A-W SCDS-140C-W SCDS-932C SCDS-932A SCDS-932B SCDS-516-1 SCDS-516B SCDS-516 SCDS-516A SCDS-380-RD2.5 SCDS-380-1 SCDS-380A SCDS-380B SCDS-716A SCDS-716B SCDS-120-1 SCDS-120A SCDS-120A-1.5 SCDS-120B SCDS-120C-2 SCDS-120C SCDS-1732 SCDS-916C SCDS-580-1.5 SCDS-580A SCDS-340-1.5 SCDS-340A-2 SCDS-340A SCDS-340B SCDS-340D SCDS-340E SCDS-340F
Fax: 828-652-1850
CED 3/32” 1/8” 5/32” 3/16” 3/16” 7/32” 1/4” 1/4” 1/4” 9/32” 9/32” 9/32” 5/16” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 7/16” 7/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 17/32” 9/16” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
CEL 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1-1/4” 1” 1” 1” 1” 1” 1-1/8” 1-1/8” 1” 1” 1-1/4” 1-1/4” 1” 1-1/4” 1” 1-1/4” 1-1/2” 1-5/8” 2” 2-1/8” 1-1/8” 1-1/4” 1-1/2” 2-1/8” 1-1/2” 2” 2-1/8” 2-1/2” 3” 3-1/4” 3-1/2”
www.toolcobits.com
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 1/2” 5/16” 1/2” 5/16” 1/2” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
OAL 2” 2” 2” 2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 3” 2-1/2” 2-1/2” 3” 3” 3” 3” 3” 2-1/2” 3” 3” 3” 3” 3” 3” 3” 3-1/2” 3-1/2” 4” 4” 3” 3-1/2” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
Phone: 828-652-2273
SOLID CARBIDE SPIRALS
2 FLUTE DOWNCUT
9
ROUTER BITS MADE IN MARION, NC SINCE 1975 2 FLUTE UPCUT
SOLID CARBIDE SPIRALS
PART # SCUS-332 SCUS-180-W SCUS-532A-W SCUS-316-W SCUS-316-W-R25 SCUS-316A-W-R25 SCUS-732 SCUS-140A-.75-W SCUS-140A-W SCUS-140C-W SCUS-932B SCUS-516-1 SCUS-516B SCUS-516 SCUS-516A SCUS-380-1 SCUS-380 SCUS-380A SCUS-380B SCUS-716B SCUS-120-1 SCUS-120 SCUS-120A SCUS-120A-1.5 SCUS-120B SCUS-120C-2 SCUS-120C SCUS-1732 SCUS-916C SCUS-580 SCUS-580A-2 SCUS-340-1.5 SCUS-340A-2 SCUS-340A SCUS-340B SCUS-340D SCUS-340E SCUS-340F
CED 3/32” 1/8” 5/32” 3/16” 3/16” 3/16” 7/32” 1/4” 1/4” 1/4” 9/32” 5/16” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 7/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 17/32” 9/16” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
2 FLUTE DOWNCUT FOR MDF PART # SCDS6-140A SCDS6-380-1 SCDS6-380A SCDS6-120A SCDS6-120B SCDS6-120C-2
CED 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
2 FLUTE UPCUT FOR MDF PART # SCUS6-140A SCUS6-380-1 SCUS6-120A SCUS6-120B SCUS6-120C-2
10
Phone: 828-652-2273
CED 1/4” 3/8” 1/2” 1/2” 1/2”
CEL 1/2” 1/2” 3/4” 3/4” 3/4” 1” 3/4” 3/4” 1” 1-1/4” 1” 1” 1” 1-1/8” 1-1/8” 1” 1-1/8” 1-1/4” 1-1/4” 1-1/4” 1” 1-1/8” 1-1/4” 1-1/2” 1-5/8” 2” 2-1/8” 1-1/8” 1-1/4” 1-1/2” 2” 1-1/2” 2” 2-1/8” 2-1/2” 3” 3-1/4” 3-1/2”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 5/16” 1/2” 5/16” 1/2” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
OAL 2” 2” 2” 2” 2-1/2” 2-1/2” 2” 2-1/2” 2-1/2” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3” 3-1/2” 3-1/2” 4” 4” 3” 3-1/2” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
CEL 1” 1” 1-1/4” 1-1/4” 1-5/8” 2”
SHANK 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
OAL 2-1/2” 3” 3” 3” 3-1/2” 4”
CEL 1” 1” 1-1/4” 1-5/8” 2”
SHANK 1/4” 3/8” 1/2” 1/2” 1/2”
OAL 2-1/2” 3” 3” 3-1/2” 4”
www.toolcobits.com
Fax: 828-652-1850
2 FLUTE DOWNCUT CHIPBREAKERS PART # SCCD-380-RD2.5 SCCD-380-1 SCCD-380A SCCD-380B SCCD-716A SCCD-716B SCCD-120-1 SCCD-120A SCCD-120A-1.5 SCCD-120B SCCD-120C-2 SCCD-120C SCCD-1732 SCCD-916C SCCD-580-1.5 SCCD-580A SCCD-340-1.5 SCCD-340A-2 SCCD-340A SCCD-340B SCCD-340D SCCD-340E SCCD-340F
CED 3/8” 3/8” 3/8” 3/8” 7/16” 7/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 17/32” 9/16” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
CEL 1” 1” 1-1/4” 1-1/4” 1” 1-1/4” 1” 1-1/4” 1-1/2” 1-5/8” 2” 2-1/8” 1-1/8” 1-1/4” 1-1/2” 2-1/8” 1-1/2” 2” 2-1/8” 2-1/2” 3” 3-1/4” 3-1/2”
2 FLUTE UPCUT CHIPBREAKERS PART # SCCU-380-1 SCCU-380 SCCU-380A SCCU-380B SCCU-716B SCCU-120-1 SCCU-120 SCCU-120A SCCU-120A-1.5 SCCU-120B SCCU-120C-2 SCCU-120C SCCU-1732 SCCU-916C SCCU-580 SCCU-580A-2 SCCU-340-1.5 SCCU-340A-2 SCCU-340A SCCU-340B SCCU-340D SCCU-340E SCCU-340F
CED 3/8” 3/8” 3/8” 3/8” 7/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 17/32” 9/16” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/8” 1-1/4” 1-1/4” 1-1/4” 1” 1-1/8” 1-1/4” 1-1/2” 1-5/8” 2” 2-1/8” 1-1/8” 1-1/4” 1-1/2” 2” 1-1/2” 2” 2-1/8” 2-1/2” 3” 3-1/4” 3-1/2”
SHANK 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
OAL 2-1/2” 3” 3” 3” 3” 3” 3” 3” 3-1/2” 3-1/2” 4” 4” 3” 3-1/2” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
SHANK 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
OAL 3” 3” 3” 3” 3” 3” 3” 3” 3-1/2” 3-1/2” 4” 4” 3” 3-1/2” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
2 FLUTE DOWNCUT CHIPBREAKER FOR MDF PART # SCCD6-380-1 SCCD6-380A SCCD6-120A SCCD6-120B SCCD6-120C-2
CED 3/8” 3/8” 1/2” 1/2” 1/2”
CEL 1” 1-1/4” 1-1/4” 1-5/8” 2”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2”
2 FLUTE UPCUT CHIPBREAKER FOR MDF PART # SCCU6-380-1 SCCU6-120A SCCU6-120B SCCU6-120C-2 SCCU6-120D
Fax: 828-652-1850
CED 3/8” 1/2” 1/2” 1/2” 1/2”
CEL 1” 1-1/4” 1-5/8” 2” 2-3/8”
www.toolcobits.com
SHANK 3/8” 1/2” 1/2” 1/2” 1/2”
SOLID CARBIDE SPIRALS
ROUTER BITS MADE IN MARION, NC SINCE 1975
OAL 3” 3” 3” 3-1/2” 4”
OAL 3” 3” 3-1/2” 4” 4”
Phone: 828-652-2273
11
ROUTER BITS MADE IN MARION, NC SINCE 1975 2 FLUTE DOWNCUT, LEFT HAND PART # SCDS-180-W-LH SCDS-316-LH SCDS-732-LH SCDS-140A-LH SCDS-516-1LH SCDS-380-1-LH SCDS-716B-LH SCDS-120A-LH SCDS-120B-LH SCDS-120C-2LH SCDS-580-1.5-LH SCDS-580-2-LH SCDS-340-1.5-LH SCDS-340-2LH
CED 1/8” 3/16” 7/32” 1/4” 5/16” 3/8” 7/16” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4”
2 FLUTE UPCUT, LEFT HAND
SOLID CARBIDE SPIRALS
PART # SCUS-180-W-LH SCUS-316-W-LH SCUS-732-LH SCUS-140A-LH SCUS-516-1-LH SCUS-380-1-LH SCUS-716B-LH SCUS-120A-LH SCUS-120A-1.5LH SCUS-120C-2-LH SCUS-580A-2LH SCUS-340A-2-LH
CED 1/8” 3/16” 1/4” 1/4” 5/16” 3/8” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4”
CEL 1/2” 3/4” 3/4” 1” 1” 1” 1-1/4” 1-1/4” 1-5/8” 2” 1-1/2” 2” 1-1/2” 2”
SHANK 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4”
OAL 2” 2” 2” 2-1/2” 3” 3” 3” 3” 3-1/2” 4” 3-1/2” 4” 4” 4”
CEL 1/2” 3/4” 3/4” 1” 1” 1” 1-1/4” 1-1/4” 1-1/2” 2” 2” 2”
SHANK 1/4” 1/4” 1/4” 1/4” 5/16” 3/8” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4”
OAL 2” 2” 2” 2-1/2” 3” 3” 3” 3” 3-1/2” 4” 4” 4”
2 FLUTE FLUSH TRIM DOWNCUT SPIRAL PART # SCFT-DS-140 SCFT-DS-120A SCFT-DS-120C
CED 1/4” 1/2” 1/2”
CEL 1” 1-1/4” 2”
2 FLUTE FLUSH TRIM UPCUT SPIRAL PART # SCFT-US-140 SCFT-US-120A SCFT-US-120C
3 FLUTE DOWNCUT PART # SCDS3-380 SCDS3-120-1.25 SCDS3-120A SCDS3-120B SCDS3-580 SCDS3-340-1.5 SCDS3-340A SCDS3-340E
3 FLUTE UPCUT PART # SCUS3-380 SCUS3-120-1.25 SCUS3-120A SCUS3-120B SCUS3-580 SCUS3-340-1.5 SCUS3-340A-2 SCUS3-340E
12
Phone: 828-652-2273
SHANK 1/4” 1/2” 1/2”
OAL 3” 4” 4-1/2”
BEARING B-250 B-500 B-500
BEARING B-250 B-500 B-500
CED 1/4” 1/2” 1/2”
CEL 1” 1-1/4” 2”
SHANK 1/4” 1/2” 1/2”
OAL 3” 3-1/2” 4-1/2”
CED 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
CEL 1-1/4” 1-1/4” 1-5/8” 2” 2” 1-1/2” 2” 3”
SHANK 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 4” 4” 6”
CED 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
CEL 1-1/4” 1-1/4” 1-5/8” 2” 2” 1-1/2” 2” 3”
SHANK 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 4” 4” 6”
www.toolcobits.com
Fax: 828-652-1850
3 FLUTE DOWNCUT CHIPBREAKERS PART # SCCD3-380 SCCD3-120-1.25 SCCD3-120A SCCD3-120B SCCD3-580 SCCD3-340-1.5 SCCD3-340A SCCD3-340E
CED 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
CEL 1-1/4” 1-1/4” 1-5/8” 2” 2” 1-1/2” 2” 3”
3 FLUTE UPCUT CHIPBREAKERS PART # SCCU3-380 SCCU3-120-1.25 SCCU3-120A SCCU3-120B SCCU3-580 SCCU3-340-1.5 SCCU3-340A-2 SCCU3-340E
CED 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
CEL 1-1/4” 1-1/4” 1-5/8” 2” 2” 1-1/2” 2” 3”
3 FLUTE SLOW SPIRAL DOWNCUT PART # SCSSD3-140A SCSSD-380 SCSSD-120 SCSSD-120-1.25S SCSSD-120-1.5 SCSSD-120A SCSSD-340
CED 1/4” 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
CEL 1” 1-1/4” 1-1/8” 1-1/4” 1-1/2” 1-5/8” 2”
3 FLUTE SLOW SPIRAL UPCUT PART # SCSSU3-140A SCSSU-380-34CL SCSSU-380 SCSSU-120-750 SCSSU-120 SCSSU-120-1.25 SCSSU-120A-1.5 SCSSU-120-RD4 SCSSU-120C-134 SCSSU-340 SCSSU-340D
CED 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
CEL 1” 3/4” 1-1/4” 3/4” 1-1/8” 1-1/4” 1-1/2” 1-1/2” 1-3/4” 2” 3”
3 FLUTE DOWNCUT ROUGHER PART # SCDR-380-78 SCDR-380 SCDR-120 SCDR-120A-1.5 SCDR-120A-RD4 SCDR-120A-134 SCDR-120B-134-4 SCDR-120C SCDR-580-2 SCDR-340B SCDR-340C SCDR-340D SCDR-340E SCDR-340F
Fax: 828-652-1850
CED 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4”
CEL 7/8” 1-1/4” 1-1/4” 1-1/2” 1-5/8” 1-3/4” 1-3/4” 2” 2” 2” 2-1/2” 3” 3-1/4” 3-1/2”
www.toolcobits.com
SHANK 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 4” 4” 6”
SHANK 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 4” 4” 6”
SHANK 1/4” 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
OAL 2-1/2” 3” 3-1/2” 3” 3-1/2” 4” 4”
SHANK 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
OAL 2-1/2” 3” 3” 3” 3” 3” 3-1/2” 4” 4” 4” 6”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4”
OAL 2-1/2” 3” 3” 3 1/2” 4” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
Phone: 828-652-2273
SOLID CARBIDE SPIRALS
ROUTER BITS MADE IN MARION, NC SINCE 1975
13
ROUTER BITS MADE IN MARION, NC SINCE 1975 3 FLUTE UPCUT ROUGHER PART # SCUR-380-78 SCUR-380 SCUR-120 SCUR-120A-1.5 SCUR-120A SCUR-120B-RD4 SCUR-120C SCUR-580-2 SCUR-340 SCUR-340C SCUR-340D SCUR-340E SCUR-340F
CED 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4”
CEL 7/8” 1-1/4” 1-1/4” 1-1/2” 1-5/8” 1-3/4” 2” 2” 2” 2-1/2” 3” 3-1/4” 3-1/2”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4” 3/4” 3/4”
3 FLUTE SLOW SPIRAL DOWNCUT ROUGHER
SOLID CARBIDE COMPRESSIONS
PART # SCSSDR-380 SCSSDR-380-SP SCSSDR-120-1.25 SCSSDR-120A-1.5 SCSSDR-120A-SP SCSSDR-580-SP SCSSDR-340A-2
CED 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 3/4”
CEL 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-5/8” 2-1/8” 2”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 3/4”
3 FLUTE SLOW SPIRAL UPCUT ROUGHER PART # SCSSUR-380 SCSSUR-120-SP SCSSUR-120A-SP SCSSUR-120B-SP SCSSUR-580B-SP SCSSUR-580C-SP SCSSUR-340B-SP SCSSUR-340-SP
CED 3/8” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4”
CEL 1-1/4” 1-1/8” 1-5/8” 1-3/4” 1-5/8” 2-1/8” 1-5/8” 2”
4 FLUTE DOWNCUT FINISH/ROUGHER PART # SC4DRF-120 SC4DRF-120B SC4DRF-120C SC4DRF-580B SC4DRF-580B SC4DRF-340B
CED 1/2” 1/2” 1/2” 5/8” 5/8” 3/4”
CEL 1-1/8” 1-5/8” 2-1/8” 2-1/8” 2-1/8” 2-1/8”
4 FLUTE UPCUT FINISH/ROUGHER PART # SC4URF-120 SC4URF-120B SC4URF-120C SC4URF-340A
OAL 2-1/2” 3” 3” 3-1/2” 3-1/2” 4” 4” 4” 4” 5” 6” 6” 6”
OAL 3” 3-1/2” 3-1/2” 4” 4” 5” 5”
SHANK 3/8” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4”
OAL 3” 3-1/2” 4” 4” 4” 5” 4” 5”
SHANK 1/2” 1/2” 1/2” 5/8” 5/8” 3/4”
OAL 3-1/2” 4” 4-1/2” 5” 5” 5”
CED 1/2” 1/2” 1/2” 3/4”
CEL 1-1/8” 1-5/8” 2-1/8” 2-1/8”
SHANK 1/2” 1/2” 1/2” 3/4”
OAL 3-1/2” 4” 4-1/2” 5”
CED 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2”
CEL 1” 1-1/4” 1-1/4” 1-1/8” 1-1/4” 1-3/8” 1-5/8”
SHANK 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/2” 3” 3” 3” 3” 3-1/2” 3-1/2”
SOLID CARBIDE COMPRESSIONS 1+1 COMPRESSION PART # SCCOM-140 SCCOM-380 SCCOM-380-316U SCCOM-120 SCCOM-120-1.25 SCCOM-120A SCCOM-120B
14
Phone: 828-652-2273
www.toolcobits.com
UPCUT 1/4” 3/8” 3/16” 1/2” 1/2” 1/2” 1/2”
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # SCCOM-140-LH SCCOM-380-LH SCCOM-120-1.25L
CED 1/4” 3/8” 1/2”
CEL 1” 1-1/4” 1-1/4”
SHANK 1/4” 3/8” 1/2”
OAL 2-1/2” 3” 3”
UPCUT 1/4” 3/8” 1/2”
CED 5/16” 3/8” 1/2” 1/2” 1/2” 1/2” 5/8”
CEL 1” 1-1/4” 1” 1” 1-1/4” 1-5/8” 2-1/4”
SHANK 5/16” 3/8” 1/2” 1/2” 1/2” 1/2” 5/8”
OAL 3” 3” 3” 3-1/2” 3” 3-1/2” 5”
UPCUT 3/16” 3/16” 3/16” 3/16” 3/16” 3/16” 3/8”
CED 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/2” 1-1/8” 1-1/4” 1-3/8” 1-5/8” 1-5/8” 1-5/8” 1-3/4” 2” 1-1/2” 2” 1-1/2” 2” 2-1/2” 3”
SHANK 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4”
OAL 2-1/2” 3” 4” 3” 3” 3-1/2” 3-1/2” 3-1/2” 4” 4” 4” 4” 4” 4” 4” 5” 6”
UPCUT 3/16” 3/8” 3/8” 5/16” 5/16” 5/16” 5/16” 1/4” 5/16” 1/4” 5/16” 9/16” 5/8” 7/8” 7/8” 7/8” 7/8”
CEL 1-1/4” 1-1/4” 1-1/8” 1-1/8” 1-1/4” 1-3/8” 1-5/8” 1-5/8” 1-3/4” 2” 2”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4”
OAL 3” 3” 3” 3” 3” 3-1/2” 3-1/2” 3-1/2” 3-1/2” 4” 4”
UPCUT 3/16” 3/8” 3/16” 5/16” 5/16” 5/16” 3/16” 5/16” 3/4” 5/16” 7/8”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4”
OAL 3” 4” 3” 3” 3-1/2” 3-1/2” 3-1/2” 4” 4” 4” 4” 4” 4” 4” 5” 6”
UPCUT 3/8” 3/8” 5/16” 5/16” 5/16” 5/16” 1/4” 5/16” 1/4” 5/16” 9/16” 5/8” 7/8” 7/8” 7/8” 7/8”
2+2 COMPRESSION, MORTISE PART # SCCOM2-516 SCCOM2-380 SCCOM2-120-316U SCCOM2-120-316M SCCOM2-120-316E SCCOM2-120B-316 SCCOM2-580-2.25
2+2 COMPRESSION PART # SCCOM2-140 SCCOM2-380-3/8E SCCOM2-380C SCCOM2-120 SCCOM2-120-1.25 SCCOM2-120A SCCOM2-120B SCCOM2-120B-.25 SCCOM2-120B-RD4 SCCOM2-120C-U25 SCCOM2-120D-RD4 SCCOM2-580FIBER SCCOM2-580 SCCOM2-340-1.5 SCCOM2-340 SCCOM2-340-RD5 SCCOM2-340E
2+2 COMPRESSION FOR MDF PART # SCOM26-380 SCOM26-380-3/8E SCOM26-120-U316 SCOM26-120 SCOM26-120-1.25 SCOM26-120A SCOM26-120B-316 SCOM26-120B SCOM26-120C-U34 SCOM26-120D SCOM26-340
CED 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4”
2+2 COMPRESSION W/ CHIPBREAKERS PART # SCCBM2-380-3/8E SCCBM2-380C SCCBM2-120 SCCBM2-120-1.25 SCCBM2-120A SCCBM2-120B SCCBM2-120B-.25 SCCBM2-120B-RD4 SCCBM2-120C-U25 SCCBM2-120D-RD4 SCCBM2-580FIBER SCCBM2-580 SCCBM2-340-1.5 SCCBM2-340 SCCBM2-340-RD5 SCCBM2-340E
Fax: 828-652-1850
CED 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4”
CEL 1-1/4” 1-1/2” 1-1/8” 1-1/4” 1-3/8” 1-5/8” 1-5/8” 1-5/8” 1-3/4” 2” 1-1/2” 2” 1-1/2” 2” 2-1/2” 3”
www.toolcobits.com
Phone: 828-652-2273
SOLID CARBIDE COMPRESSIONS
1+1 COMPRESSION, LEFT HAND
15
ROUTER BITS MADE IN MARION, NC SINCE 1975 2+2 COMPRESSION, LEFT HAND PART # SCCOM2-140-LH SCCOM2-380-LH SCCOM2-380-38EL SCCOM2-120A-L SCCOM2-120B-L SCCOM2-120D-LH SCCOM2-580-LH SCCOM2-340-1.5L SCCOM2-340-2LH SCCOM2-340-R5L
3+3 COMPRESSION PART # SCCOM3-380 SCCOM3-380-3/8E SCCOM3-120 SCCOM3-120A-316 SCCOM3-120-1.25 SCCOM3-120B SCCOM3-340
CED 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/4” 1-1/4” 1-5/8” 2” 2” 1-1/2” 2” 2-1/2”
SHANK 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 3/4” 3/4” 3/4”
OAL 2-1/2” 3” 3” 3” 3-1/2” 4” 4” 4” 4” 5”
UPCUT 3/16” 3/16” 3/8” 5/16” 5/16” 5/16” 5/8” 7/8” 7/8” 7/8”
CED 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
CEL 1-1/4” 1-1/4” 1-1/8” 1-1/4” 1-1/4” 1-5/8” 2”
SHANK 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
OAL 3” 3” 3” 3” 3” 3-1/2” 4”
UPCUT 3/16” 3/8” 7/16” 3/16” 7/16” 3/4” 7/8”
SOLID CARBIDE COMPRESSIONS
3+3 COMPRESSION W/ CHIPBREAKERS PART # SCCBM3-380-3/8E SCCBM3-120 SCCBM3-120A-316 SCCBM3-120-1.25 SCCBM3-120B SCCBM3-340
4+4 COMPRESSION PART # SCCOM4-120-1 SCCOM4-120 SCCOM4-120A SCCOM4-120B-RD4 SCCOM4-340 SCCOM4-340B
CED 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
CEL 1-1/4” 1-1/8” 1-1/4” 1-1/4” 1-5/8” 2”
SHANK 3/8” 1/2” 1/2” 1/2” 1/2” 3/4”
OAL 3” 3” 3” 3” 3-1/2” 4”
UPCUT 3/8” 7/16” 3/16” 7/16” 3/4” 7/8”
CED 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
CEL 1” 1-1/8” 1-3/8” 1-5/8” 1-7/8” 2-1/2”
SHANK 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 5”
UPCUT 1/2” 1/2” 3/4” 3/4” 7/8” 1-1/4”
CEL 7/8” 1-3/8”
SHANK 1/2” 1/2”
OAL 3” 3-1/2”
UPCUT 3/16” 3/16”
SHANK 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
OAL 3” 3” 3-1/2” 4” 4” 5”
UPCUT 1/2” 1/2” 3/4” 3/4” 7/8” 1-1/4”
4+4 COMPRESSION MORTISE PART # SCCOM4-120-78 SCCOM4-120A-316
CED 1/2” 1/2”
4+4 COMPRESSION FINISH/ROUGHER PART # SCCR-120-1 SCCR-120 SCCR-120A SCCR-120B-RD4 SCCR-340 SCCR-340B
16
Phone: 828-652-2273
CED 1/2” 1/2” 1/2” 1/2” 3/4” 3/4”
CEL 1” 1-1/8” 1-3/8” 1-5/8” 1-7/8” 2-1/2”
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
SINGLE FLUTE STRAIGHT BIT
HIGH HOOK
Part # 400-240 400-250 400-260 400-340 400-350 400-360 400-520 400-530 400-540 400-550 400-560 400-570
CED 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
CEL 1” 1” 1” 1” 1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 2” 2-1/2”
DOUBLE FLUTE STRAIGHT BIT
HIGH HOOK
Part # 401-218 401-235 401-240 401-245 401-260 401-265 401-292 401-315 401-325 401-325E 401-330 401-335 401-360 401-365 401-370 401-370E 401-375 401-380 401-385 401-410 401-420 401-515 401-525 401-540 401-550 401-555 401-560 401-565 401-570 401-575 401-580 401-590 401-620 401-625 401-630 401-640 401-656 401-675 401-730 401-735 401-745 401-755 401-765 401-775 401-785 401-810 401-820 401-860
CED 0.248 1/4” 1/4” 1/4” 1/4” 1/4” 9/32” 5/16” 5/16” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 13/32” 7/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 17/32” 9/16” 5/8” 5/8” 5/8” 5/8” 21/32” 11/16” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 25/32” 13/16” 7/8” 1”
CEL 1” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1” 1” 1” 1-1/4” 1” 1” 1” 1” 1-1/4” 1-1/4” 1-1/4” 1” 1-1/4” 1” 1” 1-1/4” 1-1/2” 1-1/2” 2” 2” 2” 2-1/2” 1-1/4” 1-1/4” 1” 1-1/4” 1-1/2” 2” 1-1/4” 1-1/4” 1” 1-1/4” 1-1/2” 2” 2” 2-1/2” 1-1/4” 1-1/4” 1-1/4” 1-1/4”
SHANK 1/4” 1/4” 1/2” 1/2” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/4” 2-7/8” 2-1/2” 2-1/2” 2-1/2” 2-3/4” 2-3/4” 4” 3” 4” 4” 4-1/4”
SHANK 1/4” 1/4” 1/4” 1/2” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/4” 1/4” 3/8” 1/2” 1/2” 1/4” 3/8” 1/2” 1/2” 1/2” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 1/2” 1/2” 1/2” 1/2”
OAL 3-3/4” 2” 2-5/8” 2-1/4” 2-3/8” 2-7/8” 2-1/4” 2-1/4” 2-1/2” 2-3/4” 3” 2-1/2” 2-1/4” 2-1/4” 2-1/2” 3” 2-1/2” 3-3/8” 2-3/4” 2-1/2” 2-3/4” 2-1/2” 3-1/4” 2-3/4” 3” 4-1/4” 3-1/2” 4” 5” 4-1/2” 2-7/8” 2-7/8” 2-5/8” 2-7/8” 3-1/8” 3-3/4” 2-7/8” 2-7/8” 2-3/4” 2-3/4” 3” 3-3/4” 4” 5” 2-7/8” 2-7/8” 2-7/8” 2-7/8”
CARBIDE TIPPED BITS
CARBIDE TIPPED BITS
CONTINUED ON THE NEXT PAGE.....
Fax: 828-652-1850
www.toolcobits.com
Phone: 828-652-2273
17
ROUTER BITS MADE IN MARION, NC SINCE 1975 DOUBLE FLUTE STRAIGHT BIT, CONT..... Part # 401-870 401-880 401-890 401-895 401-900 401-910 401-930 401-950
CED 1” 1” 1-1/8” 1-1/8” 1-1/8” 1-1/4” 1-1/2” 1-3/4”
CEL 1-1/2” 2” 1-1/4” 1-1/2” 2” 1-1/4” 1-1/4” 1-1/4”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-7/8” 3-3/4” 3-1/4” 3-1/2” 4” 2-7/8” 2-7/8” 2-7/8”
HIGH HOOK DOUBLE FLUTE TEMPLATE STRAIGHT BIT
CARBIDE TIPPED BITS
Part # 401-515T 401-715T 401-730T 401-735T 401-745T 401-755T 401-890T 401-895T 401-900T
CED 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 1-1/8” 1-1/8” 1-1/8”
CEL 1” 3/4” 1” 1-1/4” 1-1/2” 2” 1-1/4” 1-1/2” 2”
SHANK 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/2” 2-3/8” 2-3/4” 2-3/4” 3” 3-3/4” 3-1/4” 3-1/2” 4”
SHANK 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/2” 2-5/8” 2-7/8” 3-1/8” 3-1/2” 4-1/8” 4-1/2” 5-1/2” 2-3/4” 2-3/4” 3” 3-3/4” 3-1/4” 3-1/2” 4”
BEARING B-500A B-750-12 B-750-12 B-750-12 B-750-12 B-750-12 B-1125 B-1125 B-1125
HIGH HOOK DOUBLE FLUTE STRAIGHT BIT
Part # 401E-026’ 401E-066’ 401E-067’ 401E-069’ 401E-071’ 401E-072’ 401E-073’ 401E-073-01’ 401E-084’ 401E-085’ 401E-086’ 401E-087’ 401E-096-02’ 401E-096’ 401E-096-04’
CED 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 1-1/8” 1-1/8” 1-1/8”
CEL 1” 1” 1-1/4” 1-1/2” 2” 2” 2-1/2” 2-1/2” 1” 1-1/4” 1-1/2” 2” 1-1/4” 1-1/2” 2”
DOUBLE FLUTE TEMPLATE STRAIGHT BIT Part # 401E-026T 401E-084T 401E-085T 401E-086T 401E-087T 401E-096-02T 401E-096T 401E-096-04T
CED 1/2” 3/4” 3/4” 3/4” 3/4” 1-1/8” 1-1/8” 1-1/8”
CEL 1” 1” 1-1/4” 1-1/2” 2” 1-1/4” 1-1/2” 2”
2 FLUTE DOWNSHEAR STRAIGHT BIT
Part # 401H-0332* 401H-0362 401H-0752 401H-1192 401H-0335* 401H-0365 401H-0755 401H-1195 * bits are solid carbide
18
Phone: 828-652-2273
CED 7/32” 15/64” 31/64” 23/32” 7/32” 15/64” 31/64” 23/32”
CEL 3/4” 3/4” 1” 1” 3/4” 3/4” 1” 1”
www.toolcobits.com
SHANK 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/2” 2-3/4” 2-3/4” 3” 3-3/4” 3-1/4” 3-1/2” 4”
SHANK 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2”
OAL 2” 2-1/4” 2-1/4” 2-1/4” 2-15/16” 2-1/4” 2-5/8” 2-1/2”
BEARING B-500A B-750-12 B-750-12 B-750-12 B-750-12 B-1125 B-1125 B-1125
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
Part # 402-005 402-010 402-015 402-020 402-025 402-030 402-040
CED 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
DOUBLE FLUTE PANEL PILOT Part # 402-134 402-138 402-142
CED 3/8” 1/2” 1/2”
STAGGERTOOTH PANEL BIT Part # 402-550
CED 1/2”
STAGGERTOOTH BIT Part # 403-760
CED 1/2”
CEL 3/4” 3/4” 1” 1” 1-1/4” 1-1/4” 2”
SHANK 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 1/2”
OAL 2-1/2” 2-1/2” 3” 2-7/8” 3-1/2” 3-1/2” 4-1/2”
TIPS WEDGE TIP FLAT TIP WEDGE TIP FLAT TIP WEDGE TIP FLAT TIP WEDGE TIP
CEL 1” 1-3/16” 2”
SHANK 3/8” 1/2” 1/2”
OAL 2-7/8” 3-1/2” 4-1/2”
TIPS WEDGE TIP WEDGE TIP WEDGE TIP
CEL 1-7/8”
SHANK 1/2”
OAL 3-3/8”
CEL 1 1-3/16”
CEL 2 1-3/16”
CEL 2-1/4”
SHANK 1/2”
OAL 4”
CEL 1/2” 1” 1” 1/2” 1” 1-1/2” 1/2” 1” 1” 1-1/2” 2” 1” 1-1/4” 1-1/2” 2”
SHANK 1/4” 1/4” 3/8” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/4” 2-3/4” 2-7/8” 2-5/16” 2-13/16” 3-5/16” 2-11/16” 3-3/16” 3-15/16” 3-11/16” 4-3/16” 3-1/4” 3-1/2” 3-3/4” 4-1/4”
FLUTES 2 2 1 2 2 2 2 2 1 2 2 2 2 2 2
BEARING B-375 B-375 B-375A B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-750 B-750 B-750 B-750
CEL 1/2” 1” 1” 1-1/2” 2”
SHANK 1/4” 1/4” 1/2” 1/2” 1/2”
OAL 2-5/16” 2-13/16” 3-3/16” 3-11/16” 4-3/16”
FLUTES 3 3 3 3 3
BEARING B-500 B-500 B-500 B-500 B-500
FLUSH TRIM BIT, 1 AND 2 FLUTE PART # FTB-121 FTB-120 FTB-320-SF FTB-131 FTB-130 FTB-140 FTB-231 FTB-230 FTB-520-SF FTB-232 FTB-240 FTB-340 FTB-340C FTB-342 FTB-350
CED 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4”
FLUSH TRIM BIT, 3 FLUTE PART # FTB-134 FTB-133 FTB-233 FTB-235 FTB-243
Fax: 828-652-1850
CED 1/2” 1/2” 1/2” 1/2” 1/2”
www.toolcobits.com
CARBIDE TIPPED BITS
SINGLE FLUTE PANEL PILOT
Phone: 828-652-2273
19
ROUTER BITS MADE IN MARION, NC SINCE 1975 FLUSH TRIM BIT, DOUBLE BEARING
PART # FTB-252 FTB-253 FTB-262 FTB-263
CED 1/2” 1/2” 1/2” 1/2”
CEL 1-1/2” 2” 1-1/2” 2”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3-7/8” 4-3/8” 3-7/8” 4-3/8”
FLUTES 2 2 3 3
BEARING 2 X B-500 2 X B-500 2 X B-500 2 X B-500
CED 1/2” 3/4” 3/4”
CEL 1/4” 5/8” 5/8”
SHANK 1/4” 1/4” 1/2”
OAL 1-11/16” 1-5/16” 1-5/16”
ANGLE 2 DEG 4 DEG 4 DEG
BEARING B-E500 B-E750 B-E750
CED 9/16” 5/8” 3/4” 3/4” 1” 1” 1-3/16” 1-3/8”
CEL 3/8” 9/32” 1/2” 9/32” 9/16” 1” 15/16” 7/8”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2”
OAL 2-3/8” 1-15/16” 2-3/16” 1-15/16” 2-1/4” 2-15/16” 2-15/16” 2-15/16”
CEL 1/2” 1/2”
SHANK 1/4” 1/4”
OAL 1-1/8” 1-7/8”
ANGLE 22-1/2” 22-1/2”
OAL 3-1/16”
BEARING B-625
EURO TRIM BIT PART # FTE-500-4 FTE-750-4 FTE-750-2
BEVEL TRIM BIT, CT
CARBIDE TIPPED BITS
PART # BTB-107 BTB-115B BTB-115-12 BTB-122B BTB-125 BTB-115E-2 BTB-1225E-2 BTB-130E-2
FLUSH AND BEVEL, CT PART # FB-716 FB-716C
CED 7/16” 7/16”
BEADING PICTURE FRAME MOLDING BIT PART # BFM-9205
CED 1-45/64”
CEL 1-11/16”
BORING POINT ROUNDOVER PART # BPRO-140 BPRO-380A BPRO-380 BPRO-120 BPRO-916 BPRO-340
20
Phone: 828-652-2273
CED 3/4” 1” 1” 1-3/8” 1-5/8” 2”
CEL 9/16” 1/2” 3/4” 1” 1-5/16” 1-7/16”
www.toolcobits.com
SHANK 1/2”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-1/16” 2-1/8” 2-1/4” 2-1/2” 2-13/16” 3-1/16”
ANGLE BEARING 7 DEG B-500 15 DEG B-500 15 DEG B-500 22 DEG B-500 25 DEG B-500 15 DEG B-500 22.5 DEG B-500 30 DEG B-500
RAD 1/4” 3/8” 3/8” 1/2” 9/16” 3/4”
SM CED 1/4” 1/4” 1/4” 3/8” 1/2” 1/2”
Fax: 828-652-1850
SM CEL 3/8” 5/16” 1/2” 3/4” 1” 1-1/8”
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # BPRE-316 BPRE-316A BPRE-140 BPRE-140A BPRE-380 BPRE-380A
BULLNOSE PART # BN-564-4 BN-764-4 BN-964-4 BN-1164-4 BN-1364-4 BN-764-2 BN-964-2 BN-1164-2 BN-1364-2 BN-1764-2 BN-1132-2 BN-1332-2 BN-1532-2 BN-1732-2 BN-2132-2
CED 1” 1” 1-1/8” 1-1/8” 1-3/8” 1-3/8”
CED 21/32” 23/32” 25/32” 27/32” 29/32” 23/32” 25/32” 27/32” 29/32” 1-1/32” 1-3/16” 1-5/16” 1-7/16” 1-9/16” 1-13/16”
BULLNOSE W/ BEARING PART # BNB-564-4 BNB-764-4 BNB-964-4 BNB-1164-4 BNB-764-2 BNB-964-2 BNB-1164-2
CED 21/32” 23/32” 25/32” 27/32” 23/32” 25/32” 27/32”
CEL 1-1/16” 1-9/16” 1-1/16” 1-9/16” 1-1/16” 1-9/16”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-9/16” 3-1/16” 2-9/16” 3-1/16” 2-9/16” 3-1/16”
RAD 3/16” 3/16” 1/4” 1/4” 3/8” 3/8”
SM CED 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
SM CEL 13/16” 1-5/16” 13/16” 1-5/16” 13/16” 1-5/16”
CEL 1/2” 1/2” 3/4” 3/4” 3/4” 1/2” 3/4” 3/4” 3/4” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-3/4”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 1-3/4" 1-3/4" 2" 2" 2" 2-1/8" 2-3/8" 2-3/8" 2-3/8" 2-5/8" 2-3/4" 2-7/8" 3" 3-1/8" 3-3/8"
RAD 5/64” 7/64” 9/64” 11/64” 13/64” 7/64” 9/64” 11/64” 13/64” 17/64” 11/32” 13/32” 15/32” 17/32” 21/32”
MATERIAL 1/8” 3/16” 1/4” 5/16” 3/8” 3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1-1/4”
SHANK 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2”
OAL 1/2” 1/2” 3/4” 3/4” 1/2” 3/4” 3/4”
OAL 2-1/8" 2-1/8" 2-3/8" 2-3/8" 2-1/2" 2-3/4" 2-3/4"
RAD 5/64” 7/64” 9/64” 11/64” 7/64” 9/64” 11/64”
MATERIAL 1/8” 3/16” 1/4” 5/16” 3/16” 1/4” 5/16”
CARBIDE TIPPED BITS
BORING POINT ROUNDOVER AND EDGE TRIM
NOTE: all the above bits use a B-500 bearing
BEAUTY MOLDING BIT PART # BM-9105
CHAIRMAT BIT PART # CHR-332
CED 1-1/8”
CEL 1”
SHANK 1/2”
OAL 2-15/16”
RAD 1/8”
BEARING B-500
CED 19 mm
CEL 1/2”
SHANK 1/4”
OAL 2-1/8”
RAD 3/32”
BEARING B-745R
NOTE: max material thickness 1/4”
Fax: 828-652-1850
www.toolcobits.com
Phone: 828-652-2273
21
ROUTER BITS MADE IN MARION, NC SINCE 1975 CHAMFER BIT PART # CH-716-4 CH-716-2 CH-136-2 CH-1116-2
CED 1-3/8” 1-3/8” 2-1/8” 2-5/8”
CLASSICAL BIT
CARBIDE TIPPED BITS
PART # CL-180-4 CL-532-4 CL-180-2 CL-532-2
CORE BOX BIT
PART # CB-180A* CB-316A* CB-140A* CB-316-4 CB-140-4 CB-516-4 CB-380-4 CB-316-2 CB-140-2 CB-516-2 CB-380-2 CB-120-2 * SOLID CARBIDE
ROUND NOSE BIT PART # CB-2250
CHAMFER BIT
PART # COV-180-4 COV-316-4 COV-140-4 COV-516-4 COV-380-4 COV-120-4 COV-316-2 COV-140-2 COV-516-2 COV-380-2 COV-120-2 COV-580-2 COV-340-2
22
Phone: 828-652-2273
CEL 5/8” 5/8” 1-1/8” 1-1/2”
SHANK 1/4” 1/2” 1/2” 1/2”
OAL 2-1/8” 2-3/8” 2-3/4” 3”
CEL 2 7/16” 7/16” 13/16” 1-1/16”
ANGLE BEARING 45 DEG B-500 45 DEG B-500 45 DEG B-500 45 DEG B-500
CED 1-1/8” 1-1/4” 1-1/8” 1-1/4”
CEL 1/2” 11/16” 1/2” 11/16”
SHANK 1/4” 1/4” 1/2” 1/2”
OAL 2-1/8” 2-3/8” 2-3/8” 2-5/8”
RAD 1/8” 5/32” 1/8” 5/32”
CED 1/8” 3/16” 1/4” 3/8” 1/2” 5/8” 3/4” 3/8” 1/2” 5/8” 3/4” 1”
CEL 5/16” 3/8” 3/8” 1/4” 11/32” 3/8” 15/32” 1” 1-1/4” 1-1/4” 1-1/4” 1-1/4”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2” 2” 2” 1-1/2” 1-1/2” 1-5/8” 1-11/16” 2-1/2” 2-3/4” 2-3/4” 2-3/4” 2-3/4”
RAD 1/16” 3/32” 1/8” 3/16” 1/4” 5/16” 3/8” 3/16” 1/4” 5/16” 3/8” 1/2”
CED 2-1/4”
CEL 5/8”
SHANK 1/2”
OAL 2-1/2”
RAD 1-3/4”
CED 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-1/2” 7/8” 1” 1-1/8” 1-1/4” 1-1/2” 1-3/4” 2”
CEL 5/16” 1/2” 1/2” 1/2” 1/2” 5/8” 1/2” 1/2” 1/2” 1/2” 5/8” 3/4” 1”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2” 2-1/16” 2-1/8” 2-3/16” 2-1/4” 2-5/16” 2-5/16” 2-3/8” 2-3/8” 2-7/16” 2-9/16” 2-11/16” 2-13/16”
RAD 1/8” 3/16” 1/4” 5/16” 3/8” 1/2” 3/16” 1/4” 5/16” 3/8” 1/2” 5/8” 3/4”
www.toolcobits.com
Fax: 828-652-1850
BEARING B-500 B-500 B-500 B-500
BEARING B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # CMB-9065
CED 2-3/8”
SLOT AND UNDERCUT BIT PART # CTU-180-4 CTU-180-4B CTU-140-4 CTU-140-4B CTU-140C-4 CTU-140C-4B
CED 3/4” 3/4” 1” 1” 1-1/2” 1-1/2”
CEL 1-3/8”
CEL 1/8” 1/8” 1/4” 1/4” 1/4” 1/4”
SLOTTING AND RABBETING BIT PART # CTS-180-114-4 CTS-532-112-4 CTS-140-114-4 CTS-180-114-2 CTS-532-112-2 CTS-140-114-2 CTS-340-114-2
MDF PROFILE BIT PART # DBPS-875 DBSO-1250 DBSS-1250 DBST-1250 DBPC-1500 DBPO-1500 DBPS-1500
Fax: 828-652-1850
CED 1-1/4” 1-1/2” 1-1/4” 1-1/4” 1-1/2” 1-1/4” 1-1/4”
CED 7/8” 1-1/4” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 1-1/2”
CEL 1/8” 5/32” 1/4” 1/8” 5/32” 1/4” 3/4”
CEL 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
www.toolcobits.com
SHANK 1/2”
OAL 3-3/8”
ANGLE 1 ANGLE 2 BEARING 38 deg 52 deg B-750
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
OAL 1-7/8” 1-7/8” 2” 2” 2” 2”
DEPTH 1/4” 1/8” 3/8” 1/4” 5/8” 1/2”
BEARING NONE B-500A NONE B-500A NONE B-500A
SHANK 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2”
OAL 2” 2” 1-3/4” 1-3/4” 2” 2” 1-1/2”
DEPTH 3/8’ 1/2” 3/8” 3/8’ 1/2” 3/8” 3/8”
BEARING B-500 B-500 B-500 B-500 B-500 B-500 B-500
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
CARBIDE TIPPED BITS
CROWN MOLDING EDGE TRIM
OAL 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”
Phone: 828-652-2273
23
ROUTER BITS MADE IN MARION, NC SINCE 1975 DOOR EDGE BIT PART # DE-101
CED 1-1/2”
CEL 1-3/16”
SHANK 1/2”
OAL 2-15/16”
CEL 3/8” 3/8” 3/8” 3/8” 3/8”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-5/16” 2-5/16” 2-5/16” 2-5/16” 2-5/16”
BEARING B-500 B-500 B-500 B-500 B-500
CED 1-1/8” 1-3/8” 1-1/2”
CEL 1/2” 11/16” 3/4”
SHANK 1/2” 1/2” 1/2”
OAL 2-3/8” 11738 2-5/8”
RAD 5/32” 7/32” 1/4”
BEARING B-500 B-500 B-500
CED 1-1/8” 1-1/4” 1-3/8”
CEL 1-5/8” 1-5/8” 1-5/8”
SHANK 1/2” 1/2” 1/2”
OAL 4-1/8” 4-1/8” 4-1/8”
RAD 1/8” 3/16” 1/4”
BEARING B-875-3125 B-875-3125 B-875-3125
DOOR EDGE PROFILE
CED 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4”
CARBIDE TIPPED BITS
PART # DEP-05-2 DEP-10-2 DEP-15-2 DEP-20-2 DEP-25-2
DOUBLE ROUNDOVER PART # DRO-532-2 DRO-732-2 DRO-140-2
DOOR EDGE BIT PART # DROS-180 DROS-316 DROS-140
NOTE: for a 1/16” bead use B-750-516 bearing for a 1/8” bead use B-625-516 bearing
24
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 DODDS DOVETAIL BIT PART # DTD-550-ML DTD-550-MR
CED .550 .550
CEL 1/2” 1/2”
THREADS 5/16-24 LH 5/16-24
OAL 2” 2”
ANGLE 9 DEG 9 DEG
ROTATION LEFT-HAND RIGHT-HAND
ELLIPSE OGEE BIT PART # EOG-4 EOG-2
CED 1-3/4” 1-3/4”
CEL 1/2” 1/2”
SHANK 1/4” 1/2”
OAL 2-1/8” 2-3/8”
BEARING B-500 B-500
CED 1-1/2”
CEL 1-5/8”
SHANK 1/2”
OAL 3-9/16”
BEARING B-500
CED 5/8” 5/8”
CEL 1” 1”
SHANK 1/4” 1/2”
OAL 2-13/16” 2-3/16”
BEARING B-500 B-500
CED 1-9/16”
CEL 1-1/4”
SHANK 1/2”
MAX 1-1/4”
FURNITURE/BOX MAKER BIT PART # FBM-9205
FACE FRAME BIT PART # FFB-580-4 FFB-580-2
FINGER JOINT BIT PART # FJ-05-2
CARBIDE TIPPED BITS
Dodds is a registered trademark of the Alexander Dodds Company
FINGER DEPTH 7/32”
NOTE: max material thickness 1-1/4” NOTE: bearing B-1125
GLUE JOINT BIT PART # GJ-05-02
CED 1-1/2”
CEL 1-1/4”
SHANK 1/2”
OAL 2-3/4”
NOTE: max material thickness 1-1/4”
Fax: 828-652-1850
www.toolcobits.com
Phone: 828-652-2273
25
ROUTER BITS MADE IN MARION, NC SINCE 1975 HANG GRIP BIT PART # HGP-120
CED 1-1/8”
LOCK MITER BIT, 22.5 DEG PART # LM-225
CED 1-15/32”
LOCK MITER BIT, 45 DEGREE CARBIDE TIPPED BITS
PART # LM-2000-2
CED 2”
CEL 1-3/4”
CED 1”
OGEE BIT PART # OG-532-4 OG-140-4 OG-532-2 OG-140-2 OG-380-2
OGEE FILLET BIT PART # OGF-316-4 OGF-140-4 OGF-316-2 OGF-140-2
26
Phone: 828-652-2273
OAL 3-1/2”
BEAD OPEN BEAD DEPTH 7/8” 1/4”
CEL 15/16”
SHANK 1/2”
OAL 2-7/16”
ANGLE 22.5 DEG
CEL 7/8”
SHANK 1/2”
OAL 2-3/8”
ANGLE 45 DEG
LOCKING DRAWER GLUE JOINT PART # LD-100-2
SHANK 1/2”
CEL 1/2”
SHANK 1/2”
OAL 2-1/8”
CED 1-1/8” 1-1/2” 1-1/8” 1-1/2” 2”
CEL 9/16” 11/16” 9/16” 11/16” 15/16”
SHANK 1/4” 1/4” 1/2” 1/2” 1/2”
OAL 2-1/4” 2-3/8” 2-1/2” 2-5/8” 2-7/8”
RAD 5/32” 1/4” 5/32” 1/4” 3/8”
BEARING B-500 B-500 B-500 B-500 B-500
CED 1-3/8” 1-5/8” 1-3/8” 1-5/8”
CEL 9/16” 11/16” 9/16” 11/16”
SHANK 1/4” 1/4” 1/2” 1/2”
OAL 2-3/16” 2-3/8” 2-1/2” 2-5/8”
RAD 3/16” 1/4” 3/16” 1/4”
BEARING B-500 B-500 B-500 B-500
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # OH-116-4 OH-180-4 OH-316-4 OHM-116A-4 OHM-180A-4 OHM-116C-4 OHM-180C-4
CED 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”
MORTISE BIT PART # MBD-12-THD M916516 M916250
CED 1/2” 1-1/4” 1-1/4”
PICTURE FRAME BIT PART # PFM-9912 PFM-9922 PFM-9932 PFM-9942 PFM-9952 PFM-9915 PFM-9925 PFM-9935 PFM-9945 PFM-9955
RABBETING BIT
PART # RAB-1140-4 RAB-1140A-4 RAB-1375-4 RAB-1375A-4 RAB-1140-2 RAB-1140A-2 RAB-1375-2 RAB-1375A-2 RAB-2000-2
CEL 1/2” 1/2” 1/2” 1/2” 1/2” 1” 1”
CED 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
CED 1-1/4” 1-1/4” 1-3/8” 1-3/8” 1-1/4” 1-1/4” 1-3/8” 1-3/8” 2”
CEL 1/2” 1/2” 1/2”
OAL 31/32” 9/16” 9/16”
CEL 1-3/16” 3/4” 1-7/16” 1” 1-3/16” 1-3/16” 3/4” 1-7/16” 1” 1-3/16”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2”
CEL 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1”
ROUNDING EDGE BEADING BIT PART # REB-116-2 REB-180-2 REB-532-2
Fax: 828-652-1850
CED 5/8” 3/4” 13/16”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4”
CEL 7/16” 9/16” 3/4”
www.toolcobits.com
SHANK 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2”
SHANK 1/2” 1/2” 1/2”
OAL 2-5/8” 2-5/8” 2-3/4” 2-1/4” 2-1/4” 2-3/4” 2-3/4”
OVERHANG BEARING 1/16” B-500A 1/8” B-625 3/16” B-750 1/16” B-500 1/8” B-625-1875 1/16” B-500 1/8” B-625-1875
THREAD 1/4-28 5/16-24 1/4-28
OAL 2-7/8” 2-7/16” 3-1/8” 2-11/16” 2-13/16” 3-1/8” 2-11/16” 3-3/8” 2-15/16” 3-1/16”
OAL 2-3/16” 2-1/8” 2-1/8” 2-1/16” 2-7/16” 2-3/8” 2-3/8” 2-5/16” 3”
BEARING B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500
CARBIDE TIPPED BITS
OVERHANG BIT
DEPTH OF CUT BEARING 3/8” B-500 7/16” B-375 3/8” B-500 7/16” B-375 3/8” B-500 7/16” B-375 3/8” B-500 7/16” B-375 3/4” B-500
OAL 2-5/16” 2-7/16” 2-5/8”
RAD 1/16” 1/8” 5/32”
BEARING B-500 B-500 B-500
Phone: 828-652-2273
27
ROUTER BITS MADE IN MARION, NC SINCE 1975 MEDIUM RAISED PANEL BIT
PART # RPB-2500-COVE RPB-2500-OGEE RPB-2500-STRGHT
BEADING BIT
CARBIDE TIPPED BITS
PART# ROB-116-4 ROB-180-4 ROB-316-4 ROB-140-4 ROB-516-4 ROB-380-4 ROB-716-4 ROB-120-4 ROB-180-2 ROB-316-2 ROB-140-2 ROB-516-2 ROB-380-2 ROB-716-2 ROB-120-2 ROB-916-2 ROB-580-2 ROB-340-2 ROB-780-2 ROB-100-2
ROUNDOVER BIT PART# RO-116-4 RO-180-4 RO-316-4 RO-140-4 RO-516-4 RO-380-4 RO-716-4 RO-120-4 RO-180-2 RO-316-2 RO-140-2 RO-516-2 RO-380-2 RO-716-2 RO-120-2 RO-916-2 RO-580-2 RO-340-2 RO-780-2 RO-100-2 RO-1180-2 RO-1140-2 RO-1380-2 RO-1120-2
28
Phone: 828-652-2273
CED 2-1/2” 2-1/2” 2-1/2”
CEL 1/2” 5/8” 5/8”
SHANK 1/2” 1/2” 1/2”
OAL 2-1/2” 2-5/8” 2-5/8”
CED 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” 2” 2-1/4” 2-1/2”
CEL 3/8” 1/2” 1/2” 1/2” 9/16” 5/8” 11/16” 3/4” 1/2” 1/2” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 27/32” 1” 1-1/16” 1-1/4”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-13/16” 2-1/8” 2-1/8” 2-1/8” 2-3/16” 2-3/16” 2-5/16” 2-5/16” 2-3/8” 2-3/8” 2-3/8” 2-7/16” 2-7/16” 2-9/16” 2-9/16” 2-5/8” 2-11/16” 2-13/16” 3-3/16” 3-5/16”
RAD 1/16” 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1”
BEARING B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375 B-375
CED 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” 2” 2-1/4” 2-1/2” 3” 3-1/4” 3-1/2” 3-3/4”
CEL 1/4” 1/2” 1/2” 1/2” 9/16” 5/8” 11/16” 3/4” 1/2” 1/2” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 27/32” 1” 1-1/16” 1-1/4” 1-1/2” 1-5/8” 1-3/4” 1-7/8”
SHANK 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-7/8” 2-3/16” 2-3/16” 2-3/16” 2-1/4” 2-1/4” 2-3/8” 2-3/8” 2-7/16” 2-7/16” 2-7/16” 2-1/2” 2-1/2” 2-5/8” 2-5/8” 2-11/16” 2-3/4” 2-7/8” 3-1/4” 3-3/8” 3-11/16” 3-13/16” 3-15/16” 4-1/16”
RAD 1/16” 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 1/8” 3/16” 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2”
BEARING B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-750 B-750 B-750 B-750
www.toolcobits.com
MISC 11/16” RAD -25 DEG
Fax: 828-652-1850
BEARING B-500 B-500 B-500
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # SM-05-2 SM-10-2 SM-15-2 SM-20-2
TRIPLE FLUTE BIT PART# TFB-9905
CED 1-1/16” 7/8” 7/8” 1”
CEL 1-5/8” 1-5/8” 1-5/8” 1-5/8”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3-9/16” 3-1/2” 3-9/16” 3-1/2”
BEARING B-500 B-500 B-500 B-500
CED 7/8”
CEL 1”
SHANK 1/2”
OAL 2-15/16”
RAD 1/8”
CEL 9/32”
SHANK 1/2”
OAL 2-15/16
BEARING B-78-516
TONGUE AND GROOVE PART# TG-932-2
CED 1-5/8”
BEARING B-625
CARBIDE TIPPED BITS
SPECIALTY MOLDING BIT
NOTE: ARBOR USED A516-1316-2
V-GROOVE BIT, 60 DEG PART # VG-120-4-60 VG-120-2-60
CED 1/2” 1/2”
V-GROOVE BIT, 90 DEG PART # VG-140-4 VG-380-4 VG-580-2 VG-340-2 VG-1000-2 VG-1120-2
CED 1/4” 3/8” 5/8” 3/4” 1” 1-1/2”
V-GROOVE BIT, 120 DEG PART # VG-1340
Fax: 828-652-1850
CED 1-3/4”
CEL 5/8” 5/8”
SHANK 1/4” 1/2”
OAL 2” 2-1/4”
ANGLE 60 DEG 60 DEG
CEL 5/16” 3/16” 5/16” 3/8” 1/2” 3/4”
SHANK 1/4” 1/4” 1/2” 1/2” 1/2” 1/2”
OAL 1-5/8” 1-7/8” 2-1/8” 2-1/4” 2-3/8” 2-7/8”
ANGLE 90 DEG 90 DEG 90 DEG 90 DEG 90 DEG 90 DEG
CEL 1/2”
SHANK 1/2”
OAL 2-1/4”
ANGLE 120 DEG
www.toolcobits.com
Phone: 828-652-2273
29
ROUTER BITS MADE IN MARION, NC SINCE 1975 SOLID SURFACE BITS SOLID SURFACE BOWL BIT PART # 820-0140 820-0145 820-0150 820-0155 820-0160 820-0165 820-0166 820-0152 820-0157 820-0161 820-0164
CED 2-1/8” 2-1/4” 2-1/8” 2-3/8” 2-1/2” 2-1/2” 2-1/2” 2-1/8” 2-3/8” 2-1/2” 2-1/2”
CEL 1” 1-1/4” 7/8” 7/8” 1-1/8” 1-1/8” 1-3/8” 7/8” 7/8” 1-1/8” 1-1/8”
SHANK 1/2” 1/2” 3/8” 1/2” 1/2” 3/4” 1/2” 3/8” 1/2” 1/2” 3/4”
OAL 2-15/16” 3-3/16” 2-13/16” 2-13/16” 3-1/16” 3-1/16” 3-5/16” 2-13/16” 2-13/16” 3-1/16” 3-1/16”
ANGLE MATERIAL BEARING 20 DEG 1/2” BR-78A10 20 DEG 3/4” BR-78A10 10 DEG 1/2” BR-1R5 10 DEG 1/2” BR-1R5 10 DEG 3/4” BR-1R5 10 DEG 3/4” BR-1R5 10 DEG 1” BR-1R5 13 DEG 1/2” BR-1R5 13 DEG 1/2” BR-1R5 13 DEG 3/4” BR-1R5 13 DEG 3/4” BR-1R5
NOTE: 820-0140, 820-0145 is for use on Corian® bowls 802,809,810,871 NOTE: 820-0150 through 820-0166 is for use on Avonite®, Corian®, Fountainhead® and Formica® bowls, Transolid® and Hi-Macs® sinks. NOTE: 820-0152 through 820-0164 is for use on Gruber® , Royal Stone®, Transolid® and Hi-Macs® bowls. NOTE: 820-0150 through 820-0164 tools are supplied with a recessed screw.
SOLID SURFACE BITS
NOTE: RECESSED SCREW PART # SW1032R
SOLID SURFACE OGEE BOWL BIT PART # 823-0130 823-0135
CED 2-1/8” 2-1/4”
CEL 1” 1-1/4”
SHANK OAL 1/2” 2-15/16” 1/2” 3-3/16”
ANGLE MATERIAL BEARING 20 DEG 1/2” BR-78A10 20 DEG 3/4” BR-78A10
NOTE: use on Corian® bowls 802,809,810,871. NOTE: RECESSED SCREW PART # SW1032R
SOLID SURFACE BEVEL BIT PART # 825-0170 825-0171 825-0172 825-0185 825-0186 825-0187
CED 1-3/8” 1-9/16” 1-3/4” 1-3/8” 1-9/16” 1-3/4”
CEL 1” 1-1/4” 1-3/4” 1” 1-1/4” 1-3/4”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-15/16” 3-3/16” 3-11/16” 2-15/16” 3-3/16” 3-11/16”
ANGLE 10 DEG 10 DEG 10 DEG 12 DEG 12 DEG 12 DEG
MATERIAL BEARING 1/2” TO 3/4” BR-1R5 1” BR-1R5 1-1/2” BR-1R5 1/2” TO 3/4” BR-1R5 1” BR-1R5 1-1/2” BR-1R5
NOTE: 825-0170 through 825-0172 use on Avonite®, Cerata®, Corian®. NOTE: 825-0185 through 825-0187 use on Royal Stone® bowls, Gruber®, and Staron®. NOTE: ALL TOOLS SUPPLIED WITH A RECESSED SCREW PART # SW1032R
SOLID SURFACE FLUSH TRIM BIT PART # FTB-343 FTB-345 FTB-347 FTB-349
CED 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/2” 2”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3-1/4” 3-1/2” 3-3/4” 4-1/4”
MATERIAL BEARING 1/2” TO 3/4” B-750 1” B-750 1-1/4” B-750 1-3/4” B-750
Avonite®, Corian®, Fountainhead®g Formica®, Transolid®, Hi-Macs®, Gruber® , Royal Stone®, Cerata® and Staron® are all registered trademarks
30
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 SOLID SURFACE FLUSH TRIM BIT PART # 830-0212 830-0217 830-0222 830-0227
CED 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/2” 2”
SOLID SURFACE OVERHANG TRIM BIT PART # 830-0275 830-0285 830-0295 830-0297
CED 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/2” 2”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3-1/8” 3-3/8” 3-5/8” 4-1/8”
MATERIAL BEARING 1/2” TO 3/4” BR-750 1” BR-750 1-1/4” BR-750 1-3/4” BR-750
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3-1/8” 3-3/8” 3-5/8” 4-1/8”
MATERIAL 1/2” TO 3/4” 1” 1-1/4” 1-3/4”
OAL 3-1/8” 3-3/8” 3-5/8” 4-1/8”
MATERIAL BEARING 1/2” TO 3/4” BR-1R5 1” BR-1R5 1-1/4” BR-1R5 1-3/4” BR-1R5
BEARING BR-78A10 BR-78A10 BR-78A10 BR-78A10
SOLID SURFACE OVERHANG TRIM BIT PART # 830-0280 830-0290 830-0296 830-0298
CED 3/4” 3/4” 3/4” 3/4”
CEL 1” 1-1/4” 1-1/2” 2”
SHANK 1/2” 1/2” 1/2” 1/2”
SOLID SURFACE BITS
NOTE: all tools above produce a 1/16” overhang.
NOTE: all tools above produce a 1/8” overhang. NOTE: all tools above are supplied with a recessed screw. NOTE: RECESSED SCREW PART # SW1032R
SOLID SURFACE STAGGERED OVERHANG TRIM BIT PART # 830-0245 830-0255
CED 1/2” 1/2”
CEL 1-3/8” 1-3/8”
SHANK 1/2” 1/2”
OAL 3-5/16” 3-5/16”
OVERHANG BEARING 1/8” BR-34A5 7/32” BR-1516A5
NOTE: all tools above are supplied with a recessed screw. NOTE: RECESSED SCREW PART # SW1032R
SOLID SURFACE FLUSH TRIM BIT PART # SSCH-15
CED 3/4”
CEL 1”
SHANK 1/2”
SOLID SURFACE VERTICAL NO DRIP BIT PART # 840-0115
Fax: 828-652-1850
CED 1”
CEL 7/16”
www.toolcobits.com
SHANK 1/2”
OAL 2-7/8”
ANGLE 15 DEG
OAL 2-3/32”
Phone: 828-652-2273
31
ROUTER BITS MADE IN MARION, NC SINCE 1975 SOLID SURFACE NO DRIP BIT PART # 840-0100 840-0102 840-0105 840-0107
CED 1” 1” 1” 1”
CEL 7/8” 7/8” 1-1/8” 1-1/8”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 3” 3” 3-1/4” 3-1/4”
BEARING B-750R BR-750 B-750R BR-750
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 2” 2” 2” 2”
RAD 1/8” 1/8” 1/8” 1/8”
SHANK 1/2” 1/2” 1/2” 1/2”
OAL 2-7/8” 3-1/6” 3-3/16” 3-7/16”
RAD 1/4” 3/8” 1/2” 3/4”
BEARING B-1125R B-1125R B-1125R B-1125R
CEL 1/2” 9/16” 5/8” 3/4” 1”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-3/8” 2-7/16” 2-7/16” 2-9/16” 2-13/16”
RAD 1/4” 5/16” 3/8” 1/2” 3/4”
BEARING BR-500 BR-500 BR-500 BR-500 BR-500
CEL 1/8” 1/8” 1/8” 1/4” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 2-3/4” 2-3/4” 2-7/8” 2-7/8” 2-7/8” 3” 3” 3” 3-1/8” 3-1/8” 3-1/8” 3-1/4” 3-3/8” 3-3/8” 3-1/2”
SOLID SURFACE DRAINBOARD BIT
SOLID SURFACE BITS
PART # 847-0050 847-0052 847-0054 847-0056
CED 1/2” 5/8” 3/4” 1”
CEL 1/2” 1/2” 1/2” 1/2”
SOLID SURFACE UNDER ROUNDING BIT PART # 842-0140 842-0380 842-0120 842-0340
CED 1-5/8” 1-7/8” 2-1/8” 2-5/8”
CEL 3/8” 1/2” 3/4” 1”
SOLID SURFACE ROUNDOVER BIT PART # 845-0140-2 845-0516-2 845-0380-2 845-0120-2 845-0340-2
CED 1” 1-1/8” 1-1/4” 1-1/2” 2”
SOLID SURFACE INLAY BIT PART # 847-0180 847-0182 847-0184 847-0140 847-0142 847-0144 847-0380 847-0382 847-0384 847-0120 847-0122 847-0124 847-0340 847-0342 847-0344
32
Phone: 828-652-2273
CED 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8” 7/8”
www.toolcobits.com
OVERHANG BEARING 3/16” B-500A 1/8” B-625 1/16” B-750 3/16” B-500A 1/8” B-625 1/16” B-750 3/16” B-500A 1/8” B-625 1/16” B-750 3/16” B-500A 1/8” B-625 1/16” B-750 3/16” B-500A 1/8” B-625 1/16” B-750
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975
PART # 850-0300 850-0305
CED 1-1/8” 1-1/8”
CEL 1” 1”
SOLID SURFACE ROUNDOVER BIT PART # 850-0450
CED 1-5/8”
CEL 3/8”
SHANK 1/2” 1/2”
SHANK 1/2”
SOLID SURFACE 4 WING BOWL REMOVAL BIT PART # 850-0465 850-0466 850-0470
CED 3-5/8” 3-5/8” 3”
CEL 1/4” 1/4” 3/16”
SHANK 1/2” 1/2” 1/2”
OAL 3-1/8” 3-1/16”
BEARING B-1125R B-1125R
OAL 2-1/8”
OAL 3-1/4” 3-1/4” 3-3/16”
DEPTH 1-1/16” 1-1/4” 15/16”
SOLID SURFACE BITS
SOLID SURFACE DOVETAIL REPAIR BIT
BEARING BR-112A30 B-1125R B-1125R
NOTE: 850-0465, 850-0466 use on all bowls except Corian® bowls NOTE: 850-0465 use on all bowls Corian® bowls.
SOLID SURFACE PLUG CUTTER SET PART # 850-0175
PLUG 1-3/4”
SHANK 1/2”
SOLID SURFACE PROFILE BIT PART # 852-0101 852-0103 852-0104 852-0105 852-0106 852-0108 852-0109 852-0110 852-0111 852-0115 852-0117 852-0118 852-0125 852-0127 852-0130 852-0131 852-0133
Fax: 828-652-1850
CED 3” 2-3/4” 3” 2-1/2” 2-1/4” 2-1/2” 2-3/4” 1-1/2” 2-1/2” 3-1/8” 2-3/8” 1-11/16” 2” 2-1/8” 2-1/2” 2” 1-3/4”
CEL 1-1/8” 1-1/4” 1-3/8” 1-1/8” 1-1/4” 1-1/4” 1-5/8” 2” 1-1/2” 1” 1-3/16” 3/4” 1-1/8” 1” 1-1/4” 7/8” 1-1/4”
www.toolcobits.com
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 3-1/4” 3-5/16” 3-1/2” 3-1/4” 3-5/16” 3-5/16” 3-3/4” 4-1/16” 3-9/16” 3-1/16” 3-1/4” 2-13/16” 3-3/16” 3-1/16” 3-5/16” 2-15/16” 3-5/16”
BEARING BR-750 B-500 BR-750 BR-750 B-500 B-500 BR-750 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500 B-500
Phone: 828-652-2273
33
SOLID SURFACE BITS
ROUTER BITS MADE IN MARION, NC SINCE 1975
34
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 DOOR BITS 2 WING DOOR DRILL BIT PART # 2CT-218 2CT-218F
CED 2-1/8” 2-1/8”
SHANK 1/2” 1/2”
OAL 6” 6”
FLAT W/O FLAT W/ FLAT
3 WING DOOR DRILL BIT
DOOR KNOB BIT PART # DKD-2125 DKD-2125F DKD-2125-3F
CED 2-1/8” 2-1/8” 2-1/8”
3 WING DOOR KNOB BIT PART # DKD-3 DKD-3F DKD-3-750 DKD-3F-750
CED 2-1/8” 2-1/8” 2-1/8” 2-1/8”
LATCH BORE WITH SHANK PART # LBB500-7/8 LBB500-7/8F LBB500-15/16 LBB500-15/16F LBB500 LBB500F LBB500-1116 LBB500F-1116
CED 7/8” 7/8” 15/16” 15/16” 1” 1” 1-1/16” 1-1/16”
SHANK 1/2” 1/2” 1/2”
OAL 5-3/4” 5-3/4” 5-3/4”
FLAT W/O FLAT W/ FLAT W/ 3 FLATS
SHANK 1/2” 1/2” 3/4” 3/4”
OAL 5-3/4” 5-3/4” 5-3/4” 5-3/4”
FLAT W/O FLAT W/ FLAT W/O FLAT W/ FLAT
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6-1/4” 6-1/4”
FLAT W/O FLAT W/FLAT W/O FLAT W/ FLAT W/O FLAT W/ FLAT W/O FLAT W/ FLAT
LATCH BORE WITH THREADED END PART # LBB716T-7/8 LBB716T-15/16 LBB716T LBB716T-1116
Fax: 828-652-1850
CED 7/8” 15/16” 1” 1-1/16”
OAL 5-7/8” 5-7/8” 5-7/8” 5-7/8”
www.toolcobits.com
DOOR BITS
PART # CED SHANK OAL 3CT-012 1/2” 1/2” 6” 3CT-916 9/16” 1/2” 6” 3CT-058 5/8” 1/2” 6” 3CT-1116 11/16” 1/2” 6” 3CT-034 3/4” 1/2” 6” 3CT-1316 13/16” 1/2” 6” 3CT-078 7/8” 1/2” 6” 3CT-1516 15/16” 1/2” 6” 3CT-100 1” 1/2” 6” 3CT-118 1-1/8” 1/2” 6” 3CT-114 1-1/4” 1/2” 6” 3CT-138 1-3/8” 1/2” 6” 3CT-112 1-1/2” 1/2” 6” 3CT-158 1-5/8” 1/2” 6” 3CT-134 1-3/4” 1/2” 6” 3CT-178 1-7/8” 1/2” 6” 3CT-200 2” 1/2” 6” 3CT-218 2-1/8” 1/2” 6” 3CT-214 2-1/4” 1/2” 6” 3CT-238 2-3/8” 1/2” 6” 3CT-212 2-1/2” 1/2” 6” FOR A FLAT ON THE SHANK ADD AN “F” TO THE END OF THE PART NUMBER. EXAMPLE 3CT-218F
THREAD 7/16” X 14 7/16” X 14 7/16” X 14 7/16” X 14
Phone: 828-652-2273
35
ROUTER BITS MADE IN MARION, NC SINCE 1975 HIGH SPEED STEEL DOORLITE BIT PART # HSD-120-FS HSD-120-FSAL HSD-120-FSTIN HSD-120-SS HSD-120-SSAL HSD-120-SSTIN
CED 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
CEL 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”
DOORLITE BIT, CT STRAIGHT BIT PART # DL-120B DL-120E
CED 1/2” 1/2”
CEL 2-1/4” 2-1/4”
SHANK 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
OAL 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2” 5-1/2”
SHANK 1/2” 1/2”
OAL 5” 5-1/2”
COATING NONE Altin TIN NONE Altin TIN
HELIX 30 deg 30 deg 30 deg 18 deg 18 deg 18 deg
SLOT CUTTERS 2 WING SLOT CUTTERS
SLOT CUTTERS
PART # 2062 2070 2078 2080 2093 2125 2157 2187 2250
KERF Decimal FRACTION .062” 1/16” .070” N/A .078” 5/64” .080” N/A .093” 3/32” .125” 1/8” .156” NA .187” 3/16” .250” 1/4”
CED 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8”
BORE 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16”
3 WING COUNTERBORE SLOT CUTTERS PART # C3062 C3093 C3125 C3157 C3187 C3250
KERF DECIMAL FRACTION .062” 1/16” .093” 3/32” .125” 1/8” .157” NA .187” 3/16” .250” 1/4”
CED 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8”
BORE 5/16” 5/16” 5/16” 5/16” 5/16” 5/16”
1/4” SHANK 1/2” SHANK AC3062-4 AC3062-2 AC3093-4 AC3093-2 AC3125-4 AC3125-2 AC3157-4 AC3157-2 AC3187-4 AC3187-2 AC3250-4 AC3250-2
3 WING SLOT CUTTERS PART # 3050 3055 3062 3070 3078 3080 3093 3100 3110 3115 3125 3156 3157 3187 3218 3234 3250 3281 3313
36
Phone: 828-652-2273
KERF Decimal FRACTION .050” n/a .055” n/a .062” 1/16” .070” n/a .078” 5/64” .080” n/a .093” 3/32” .100” n/a .110” 7/64” .115” n/a .125” 1/8” .156” 5/32” .156” NA .187” 3/16” .218” 7/32” .234” 15/64” .250” 1/4” .281” 9/32” .313” 5/16”
www.toolcobits.com
CED 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8”
BORE 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16”
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 4 WING SLOT CUTTERS PART # 4062 4070 4080 4093 4125 4157 4187 4250 4281 4313
KERF Decimal FRACTION .062” 1/16” .070” n/a .080” n/a .093” 3/32” .125” 1/8” .156” NA .187” 3/16” .250” 1/4” .281” 9/32” .313” 5/16”
CED 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8” 1-7/8”
BORE 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16”
CED 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2” 2-1/2”
BORE 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8” 3/8”
WINGS 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
CED 1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4”
BORE 5/16” 5/16” 5/16” 5/16” 5/16”
WINGS 4 4 6 6 6
CED 1-1/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4”
THREAD 3/8” X 24 3/8” X 24 3/8” X 24 3/8” X 24 3/8” X 24
WINGS 4 4 6 6 6
OAL 2-7/16” 2-5/8” 2-5/8” 4”
PART # T2060 T2062 T2070 T2075 T2080 T2085 T2090 T2093 T2095 T2100 T2110 T2115 T2125 T2130 T2140 T2150 T2160 T2170 T2180 T2190
KERF Decimal FRACTION .060” n/a .062” 1/16” .070” n/a .075” n/a .080” n/a .085” n/a .090” n/a .093” 3/32” .095” n/a .100” n/a .110” 7/64” .115” n/a .125” 1/8” .130” n/a .140” n/a .150” n/a .160” n/a .170” n/a .180” n/a .190” n/a
SLOT CUTTERS
TOPMASTER SLOT CUTTERS
DRAWER SLOT CUTTERS PART # S4187 S4250 S6187 S6250 S6281
KERF Decimal FRACTION .187” 3/16” .250” 1/4” .187” 3/16” .250” 1/4” .281” 9/32”
JEMCO SLOT CUTTERS PART # J4187 J4250 J6187 J6250 J6281
KERF Decimal FRACTION .187” 3/16” .250” 1/4” .187” 3/16” .250” 1/4” .281” 9/32”
SLOT CUTTER ARBORS PART # AB516-78-4 AB516-78-3 AB516-78-2 AB516-78A-2
JEMCO ARBORS PART # SCA-38-4 SCA-38-3 SCA-38C-3 SCA-38-2
Fax: 828-652-1850
ARBOR DIA 5/16” 5/16” 5/16” 5/16”
ARBOR LENGTH 7/8” 7/8” 7/8” 7/8”
SHANK 1/4” 3/8” 1/2” 1/2”
THREAD 3/8”-24 3/8”-24 3/8”-24 3/8”-24
SHANK 1/4” 3/8” 3/8” 1/2”
OAL 1-3/4” 1-3/4” 3-1/4” 1-3/4”
www.toolcobits.com
Phone: 828-652-2273
37
ROUTER BITS MADE IN MARION, NC SINCE 1975 BORING BITS BRAD POINT,RH PART # DB0357RH DB0557RH DB0657RH DB0857RH DB0370RH DB0570RH DB0670RH DB0870RH
BRAD POINT,LH PART # DB0357LH DB0557LH DB0657LH DB0857LH DB0370LH DB0570LH DB0670LH DB0870LH
CED 3 mm 5 mm 6 mm 8 mm 3 mm 5 mm 6 mm 8 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm 70 mm
CED 3 mm 5 mm 6 mm 8 mm 3 mm 5 mm 6 mm 8 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm 70 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm
CED 5 mm 6 mm 8 mm 5 mm 6 mm 8 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm
CED 15 mm 20 mm 25 mm 30 mm 35 mm 15 mm 20 mm 25 mm 30 mm 35 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm 70 mm 70 mm
CED 15 mm 20 mm 25 mm 30 mm 35 mm 15 mm 20 mm 25 mm 30 mm 35 mm
SHANK 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm 10 mm
OAL 57 mm 57 mm 57 mm 57 mm 57 mm 70 mm 70 mm 70 mm 70 mm 70 mm
THROUGH HOLE V-POINT, RH
BORING BITS
PART # DT0557RH DT0657RH DT0857RH DT0570RH DT0670RH DT0870RH
CED 5 mm 6 mm 8 mm 5 mm 6 mm 8 mm
THROUGH HOLE V-POINT, LH PART # DT0557LH DT0657LH DT0857LH DT0570LH DT0670LH DT0870LH
HINGE BIT,RH PART # DH1557RH DH2057RH DH2557RH DH3057RH DH3557RH DH1570RH DH2070RH DH2570RH DH3070RH DH3570RH
HINGE BIT,LH PART # DH1557LH DH2057LH DH2557LH DH3057LH DH3557LH DH1570LH DH2070LH DH2570LH DH3070LH DH3570LH
38
Phone: 828-652-2273
www.toolcobits.com
Fax: 828-652-1850
ROUTER BITS MADE IN MARION, NC SINCE 1975 ACCESSORIES PART # B-250 B-375 B-375A B-500 B-500-250 B-E500 B-625-1875 B-625 B-625-516 B-750 B-750-516 B-750-12 B-E750 B-1116-316 B-866 B-875-3125 B-78-38 B-1125-516 B-1125 B-138-12 B-625R B-745R B-1125R
OD 1/4” 3/8” 3/8” 1/2” 1/2” 1/2” 5/8” 5/8” 5/8” 3/4” 3/4” 3/4” 3/4” 11/16” 22 mm 7/8” 7/8” 1-1/8” 1-1/8” 1-3/8” 5/8” 19 mm 1-1/8”
ID 1/8” 1/8” 3/16” 3/16” 1/4” 3/16” 3/16” 1/4” 5/16” 1/4” 5/16” 1/2” 3/16” 3/16” 8 mm 5/16” 3/8” 5/16” 1/2” 1/2” 1/4” 5 mm 1/2”
OD 1/2” 3/4” 7/8” 1” 3/4” 15/16” 1-1/2”
ID 3/16” 1/4” 1/4” 1/4” 1/4” 1/4” 1/2”
DELRIN BEARINGS PART # BR-500 BR-750 BR-78A10 BR-1R5 BR-34A5 BR-1516A5 BR-112A30
ARBORS
PART # A516-78-4 A516-78-3 A516-78-2 A516-78A-2 A516-1316-4 A516-1316-2 A516-1716-4 A516-1716-2 A516-134-2 A12-178-2 A12-218-2 A12-238-2
ARBOR DIA 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 5/16” 1/2” 1/2” 1/2”
LOCKING COLLARS PART # LCA-5 LCA-10
DUST SHIELDS PART # 12D 38D 34D
SCREWS PART # SW348 SW540 SW1032 SW1032R
Fax: 828-652-1850
DESCRIPTION
EURO-SQUARE
EURO-SQUARE OD - .866, ID - 315
RUBBER SEALED RUBBER SEALED RUBBER SEALED
DESCRIPTION FLAT FLAT 10 DEGREE ANGLE 5 DEGREE ANGLE WITH RADIUS 5 DEGREE ANGLE 5 DEGREE ANGLE 30 DEGREE ANGLE
ARBOR LENGTH 7/8” 7/8” 7/8” 7/8” 1-3/16” 1-3/16” 1-7/16” 1-7/16” 1-3/4” 1-7/8” 2-1/8” 2-3/8”
OD 7/16” 11/16”
ID 1/4” 1/2”
OD 1/2” 3/8” 3/4”
ID 3/16” 1/8” 1/4”
SHANK 1/4” 3/8” 1/2” 1/2” 1/4” 1/2” 1/4” 1/2” 1/2” 1/2” 1/2” 1/2”
ACCESSORIES
BEARINGS
OAL 2-7/16” 2-5/8” 2-5/8” 4” 2-3/4” 2-15/16” 3” 3-3/16” 3-3/8” 3-7/8” 4-1/8” 4-3/8”
THREAD DESCRIPTION 3-48 5-40 10-32 10-32 RECESSED SCREW
www.toolcobits.com
Phone: 828-652-2273
39