ORBIK Product Catalogue

ORBIK

ORBIK UK Electrical Wholesalers: SPEL Lighting & Fire Detection ORBIK House, Northgate Way, Aldridge, Walsall, West Midlands, WS9 8TX United Kingdom.

Tel: 0870 516 8214 Fax: 0870 516 8591 Email: sales@spelonline.co.uk

ORBIK

Irish Sales: ELF (Emergency Lighting & Fire) Unit 8, Block K, Ballymount Industrial Estate, Ballymount Drive, Dublin 12.

Tel: 01 426 5792 01 426 5410 Fax: 01 426 5411 Email: sales@e-l-f.ie

Head Office & European Export: ORBIK Electronics Ltd ORBIK House, Northgate Way, Aldridge, Walsall, West Midlands, WS9 8TX United Kingdom.

Tel: +44 (0) 1922 743515 Fax: +44 (0) 1922 743173 Email: sales@orbik.co.uk www.orbik.co.uk

The Lighting Specialists

Export Sales Asia, Africa & Middle East: IMCI Tel: +44 161 257 2541 Fax: +44 161 225 8817 Email: xportsales@xportsales.com

The Lighting Specialists

INTRODUCTION

Conditions of Sale

Conditions of Sale 1. GENERAL (a) In these General Conditions of Sale (the “Conditions”), the “Company” means Orbik Electronics Limited, the “goods” means any item of whatsoever nature which is to be supplied to the Purchaser by the Company in accordance with these Conditions, including any instalment or parts of the goods and the “Purchaser” means the person, firm or company who purchases or agrees to purchase the goods from the Company. (b) These Conditions shall apply to and form part of every contract of sale entered into by the Company. The Company shall sell and the Purchaser shall purchase the goods in accordance with the Company’s written quotation (if accepted by the Purchaser) or the Purchaser’s written order (if accepted by the Company), subject in either case to these Conditions, which shall govern the contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted, or any such order is made or purported to be made by the Purchaser. (c) No variation of these Conditions shall be binding unless agreed in writing between the authorised representatives of the Purchaser and the Company.

2. LIMITS OF CONTRACT (a) No order submitted by the Purchaser shall be deemed to be accepted by the Company until a written acknowledgment of order is issued by the Company or (if earlier) the Company delivers the goods to the Purchaser. (b) Any quotation is given by the Company on the basis that no contract will come into existence until the Company dispatches an acknowledgement of order to the Purchaser. (c) The Purchaser shall be responsible to the Company for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the Purchaser, and for giving the Company any necessary information relating to the goods within a sufficient time to enable the Company to perform the contract in accordance with its terms. (d) The quantity, quality and description of the goods and any specification for them shall be as set out in the Company’s quotation (if accepted by the Purchaser) or the Purchaser’s order (if accepted by the Company).

3. PRICES (a) The price payable for goods shall unless otherwise stated by the Company in writing be the Company’s quoted price or, where no price has been quoted (or a quoted price is no longer valid), the list price of the Company current at the date of delivery or deemed delivery and in the case of an order for delivery by instalments the price payable for each instalment shall be the Company’s quoted price or, where no price has been quoted (or a quoted price is no longer valid), the list price of the Company current at the date of delivery of such instalment. Any prices quoted by the Company are valid for a period of 30 days only from the date of the quotation or until earlier acceptance by the Purchaser, provided that such prices have not previously been withdrawn by the Company, after which time they may be altered by the Company without giving notice to the Purchaser. (b) Unless otherwise expressly stated to be firm for a period the Company’s prices are subject to variation to take account of any increase in the cost to the Company which is due to any factor beyond the reasonable control of the Company (such as, without limitation, significant increases in the costs of labour, materials and other costs of manufacture) calculated by using the British Electrotechnical & Allied Manufacturers Association (“BEAMA”) contract price adjustment clause and formulae. The Company reserves the right, by giving written notice to the Purchaser at any time before delivery, to increase the price of the goods accordingly. (c) The Company also reserves the right, by giving written notice to the Purchaser at any time before delivery, to increase the price of the goods to reflect any increase in costs to the Company arising from any delay caused by any instructions of the Purchaser or any failure of the Purchaser to give the Company adequate information or instructions. (d) The price for the goods shall be exclusive of value added tax and this will be charged at the applicable rate and recoverable by the Company in addition to the price. (e) All invoiced price discrepancies must be notified by the Purchaser to the Company within 7 days of the date of invoice.

4. PAYMENT (a) Unless otherwise agreed in writing between the Purchaser and the Company, the Company may invoice the Purchaser for the price of goods on or at any time after delivery of the goods, unless the goods are to be collected by the Purchaser or the Purchaser wrongfully fails to take delivery of the goods, in which event the Company shall be entitled to invoice the Purchaser for the price at any time after the Company has notified the Purchaser that the goods are ready for collection or (as the case may be) the Company has tendered delivery of the goods.

Unless otherwise agreed in writing, payment of the full price for the goods is due on or before the last working day of the month following the date of the invoice. (c) Time for payment of the price shall be of the essence of the contract. Receipts for payment will only be issued on request. (d) All payments payable to the Company under the contract shall become due immediately upon termination of the contract, despite any other provision of these Conditions. (e) Without prejudice to any other rights it may have, if the Purchaser fails to make any payment when due in accordance with these Conditions, the Purchaser will be liable to pay interest to the Company on such sum from the due date for payment at the annual rate of 2% above the base rate of HSBC Bank PLC from time to time, accruing on a daily basis until payment is made, whether before or after any judgment. The Company also reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998. (f) Additionally and without prejudice to its other rights the Company shall be entitled to recover all direct expenses reasonably incurred by the Company in collecting or attempting to collect amounts of the price outstanding. (g) If the Purchaser fails to make any payment when due in accordance with these Conditions, the Company reserves the right in its absolute discretion and without prejudice to any of its other rights or remedies to suspend all further deliveries until such payment has been made in full together with any other amounts owing to the Company whether the due date for payment has been reached or not, if so requested by the Company or, at the Company’s option, to cancel the balance of the order. In either case the Company shall hold the Purchaser liable for costs incurred in respect of goods in course of manufacture or ready for dispatch. (h) The Company shall be entitled to bring an action for the price or part thereof whether or not delivery or deemed delivery has taken place and whether or not the property in the goods has passed.

5. PAYMENT DISPUTES AND DEBIT NOTES (a) If the Purchaser operates a debit note system, debit notes will only be accepted by the Company if raised in respect of the following matters and otherwise in accordance with the provisions of this Condition 5: (i) incorrect goods supplied, subject to the provisions of Condition 2; (ii) pricing discrepancies, subject to the provisions of Condition 3; (iii) delivery shortages, subject to the provisions of Condition 6; (iv) non-delivery, subject to the provisions of Condition 8; (v) damaged goods, subject to the provisions of Conditions 8 and 13; (vi) faulty goods, subject to the provisions of Condition 13, and provided that if goods returned by the Purchaser have not been opened by the Purchaser, they will be returned to the Purchaser and no credit note will be issued by the Company; or (vii) cancellation, subject to the provision of Condition 15, and provided that in each case, written evidence of the Company’s consent to such cancellation is attached to the relevant debit note. (b) All requests to return goods to the Company must be agreed in writing by the Company before any debit note is raised by the Purchaser. (c) Debit notes will only be accepted by the Company if: (i) they include details of the Company’s invoice to which they relate; (ii) they are received by the Company within 7 days of the date on which the invoice is due for payment by the Purchaser; (iii) they are notified to the Company on the day that they are raised; and (iv) they relate to the value of goods in dispute and not the value of the whole invoice (except where the value of the whole invoice is in dispute). (d) In no circumstances will debit notes be accepted by the Company in relation to invoices which have either been subject to a prompt payment discount or which are the subject of a dispute raised by the Purchaser more than 5 days after the date on which the invoice is due for payment by the Purchaser.

6. DELIVERY (a) Delivery of the goods shall be made by the Purchaser collecting the goods at the Company’s premises within 14 days of the Company giving notice to the Purchaser that the goods are ready for collection or, if some other place for delivery is agreed by the Company, by the Company delivering goods to that place. (b) Unless accepted by the Company in writing, all times or dates quoted for delivery of the goods are given in good faith but are approximate only and time for delivery shall not be of the essence of the contract. If no dates are so specified, delivery will be within a reasonable time. The goods may be delivered by the Company in advance of the quoted delivery date on giving reasonable notice to the Purchaser. (c) All times or dates for delivery shall be calculated from the date of acceptance by the Company of the order of the Purchaser, or from the date of receipt by the Company from the Purchaser of all information, instructions and drawings as shall be necessary to enable the Company to carry out the order, whichever shall be the later. (d) If the Company delivers to the Purchaser a quantity of goods of up to 5% more or less than the quantity ordered, the Purchaser shall not be entitled to object to or reject the goods or any of them by reason of the surplus or shortfall and shall pay for such goods at the pro rata contract rate. (e) Unless otherwise stated in writing, the Company shall be entitled to make partial deliveries of the goods (delivery by instalments), provided that where goods are delivered in instalments, each delivery shall constitute a separate contract and failure by the Company to deliver any one or more of the instalments in accordance with these Conditions or any claim by the Purchaser in respect of any one or more instalments shall not entitle the Purchaser to treat the contract as a whole as repudiated. (f) Any contract shall be subject to the Company being satisfied as to the Purchaser’s credit references, and without prejudice to the generality of the foregoing, the Company may (in its absolute discretion), having informed the Purchaser that the goods are ready for dispatch, and notwithstanding any other provision of these Conditions, refrain from delivering the goods until such time as the Purchaser tenders the purchase money to the Company together with any outstanding amounts which may be due to the Company on any account whatsoever.

All ORBIK’s emergency luminaires are designed to operate in an ambient temperature of 25ºC, unless otherwise stated, and are fully compliant with EN60598.2.22 1999 and EN55015. Many of our emergency luminaires and modules are subject to ongoing surveillance testing by BSI and are covered by our kit mark licence KM31508.

Commitment to Quality

7. PACKING AND CARRIAGE (a) The costs of crates, cases, pallets, stillages, skids or other such returnable packing will be charged to the Purchaser in addition to the price of the goods. Unless otherwise specified, full credit will be given to the Purchaser provided such packaging is returned, undamaged, to the Company (carriage paid), before the Purchaser’s due payment date. No charge will be made by the Company by any other form of packaging and no credit will be allowed for its return. (b) Where the value of any order exceeds £500.00 the cost of delivery of the goods to the Purchaser’s premises on the mainland of Great Britain shall be included in the contract price. In all other cases, contract prices are exclusive of carriage and insurance to the Purchaser’s premises.

8. NON-DELIVERY OR DAMAGE IN TRANSIT (a) The quantity of any consignment of goods as recorded by the Company upon dispatch from the Company’s place of business shall be conclusive evidence of the quantity received by the Purchaser on delivery unless the Purchaser can provide conclusive proof to the contrary. (b) The Company shall not be liable for any non-delivery of goods unless written notice is given to the Company within 7 days of the date when the goods would in the ordinary course of events have been received. (c) Any liability of the Company for non-delivery of the goods shall be limited to replacing the goods within a reasonable time or issuing a credit note at the prorata contract rate against any invoice raised for such goods. (d) If the Purchaser fails to take delivery of the goods when they are ready for collection or the Company is unable to deliver the goods on time because the Purchaser has not provided appropriate delivery instructions, licences or authorisations, then, without limiting any other right or remedy available to the Company, the goods will be deemed to have been delivered and the Company may: (i) store the goods at the Company’s own premises or elsewhere on the Purchaser’s behalf until actual delivery and charge the Purchaser for the reasonable costs (including insurance) of storage; or (ii) sell the goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Purchaser for the excess over the price under the contract or charge the Purchaser for any shortfall below the price under the contract. (e) When the price quoted includes delivery, the Company shall repair or replace free of charge goods damaged in transit provided that the Company is given written notification of such damage within 7 days of the date when the goods would in the ordinary course of events have been received. (f) Subject to the provisions of Conditions 6 and 8, the Company will only consider claims for alleged shortage if they are received within 7 days of the receipt of the goods by the Purchaser together with sufficient information to enable the Company properly to identify the shortage including the Purchaser’s Advice Note number, case number and condition of case. Where goods are collected by the Purchaser, no claim for shortage or damage will be considered.

9. SAMPLES The Company shall provide samples of goods to the Purchaser on request. Samples will be charged for under the Company’s normal terms. With the prior written agreement of the Company, samples may be returned to the Company and provided they are returned in good condition (in the reasonable opinion of the Company), the Purchaser will be credited in full for such samples.

10. VARIATIONS (a) The Company shall be under no obligation to alter or vary any part of the contract or any work connected therewith. Any alteration to or addition to or amendment or other variation of the specification, including any increase or decrease in the quantity of the goods or any alteration to any drawings or to the quality, performance, weight or measurements of any goods or any alteration or variation of advised delivery schedules, shall, if requested by the Purchaser, be subject to the agreement of the Company, with such alteration or addition to the price and to delivery dates or schedules as may be required by the Company, and shall not be binding upon the Company unless and until accepted by the Company in writing. (b) In the event of any variation or suspension of the work by the Purchaser’s instructions or lack of instructions the Company shall be entitled to adjust the contract price to reflect any additional costs incurred, and to adjust delivery dates or schedules.

11. PERFORMANCE, INSPECTION AND TESTS (a) Any data, technical information or performance figures provided by the Company are based on tests performed under standard conditions at the Company’s premises. They are believed to be accurate but cannot be guaranteed under different conditions. (b) The Company’s products are carefully inspected, and, where practicable, submitted to its standard tests at the Company’s place of business before dispatch. If tests other than those specified or tests in the presence of the Purchaser or its representatives are required, these will be charged for. In the event of any delay on the Purchaser’s part in attending tests after the Purchaser has received 7 days’ notice that the Company is ready to perform the tests, the tests will proceed in the Purchaser’s absence and the Purchaser accordingly hereby agrees to accept and pay for such tests as if they had been performed in the Purchaser’s presence.

12. DESCRIPTIVE MATTER AND ILLUSTRATIONS (a) All descriptions and illustrations and particulars of weights and dimensions issued by the Company in catalogues, price lists, advertising matter and forwarding specifications are by way of general descriptions and approximate only, and shall not form part of any contract or give rise to any liability on the part of the Company. (b) It is the policy of the Company to endeavour to develop and improve its products, and accordingly the Company reserves the right to change all specifications without prior notification or public announcement pursuant to such policy, provided that nothing in this Condition 12 shall oblige the Purchaser to accept goods that do not reasonably comply with the contract.

13. WARRANTY (a) The Company will make good by repair, or at the Company’s option by the supply of a replacement, defects which, under proper storage and use appear in the goods within the period of twelve calendar months after the goods have been delivered and arise solely from faulty design (other than design made or furnished by the Purchaser), materials or workmanship. (b) The Warranty given in this clause is subject to the following provisos, namely:(i) that the Purchaser shall have followed all instructions issued by the Company in relation to the goods; (ii) that in the case of defects which would have been reasonably apparent to the Purchaser on reasonable examination of the goods on delivery, the Purchaser shall notify the Company of the defects in writing within fourteen working days of delivery; (iii) that in the case of any other defects, the Purchaser shall notify the Company of the defects in writing within seven working days of the date when the defect becomes apparent.

14. LIABILITY (a) Subject as expressly provided in these Conditions, and except where the goods are sold to a person dealing as a consumer (within the meaning of the Unfair Contract Terms Act 1977), all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. (b) A claim by the Purchaser which is based on any defect in the quality or condition of the goods or their failure to correspond with specification shall (whether or not delivery is refused by the Purchaser) be notified to the Company within 7 days from the date of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure. If delivery is not refused, and the Purchaser does not notify the Company accordingly, the Purchaser shall not be entitled to reject the goods and the Company shall have no liability for such defect or failure, and the Purchaser shall be bound to pay the price as if the goods had been delivered in accordance with the contract. (c) Where a valid claim in respect of any of the goods which is based on a defect in the quality or condition of the goods or their failure to meet specification is notified to the Company in accordance with these Conditions, the Company may, at its option, repair or replace the goods (or the part in question) free of charge, or at the Company’s sole discretion, refund to the Purchaser the price of the goods (or a proportionate part of the price), in which case the Company shall have no further liability to the Purchaser. (d) Except in respect of death or personal injury caused by the Company’s negligence, or liability for defective products under the Consumer Protection Act 1987, the Company shall not be liable whether in contract, tort or otherwise to the Purchaser by reason of any representation (unless fraudulent) or any warranty, condition or other term implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979), for any indirect, special, economic or consequential loss or damage (whether for loss of profit, loss of use, loss of production, loss of contract or otherwise) costs, expenses or other claims for compensation whatsoever (whether caused by the negligence of the Company, its employees or agents or otherwise) which arise out of or in connection with supply of the goods or their use or resale by the Purchaser.

15. REJECTION Unless otherwise agreed in writing, and subject to Condition 13 hereof, goods rejected as not complying with the contract must be rejected within 7 days of collection of the goods from the Company’s premises or if some other place for delivery is agreed by the Company, delivery to that place.

16. CANCELLATION (a) No order which has been accepted by the Company may be terminated by the Purchaser (whether by way of cancellation or otherwise) except with the prior written agreement of the Company (at the Company’s sole discretion) and on terms that the Purchaser shall indemnify the Company in full against all loss (including loss of profit), costs, damages, charges and expenses incurred by the Company as a result of the cancellation. (b) The provisions of Conditions 8(a) and 8(d) shall apply in relation to any goods which are the subject of a contract which is purportedly terminated by the Purchaser otherwise than in accordance with this Condition 15.

17. RETURN OF GOODS (a) Subject to Conditions 8 and 13 hereof, in no circumstances may goods supplied in accordance with a binding contract for sale be returned without the Purchaser first having applied for and obtained the written consent of the Company, provided that: (i) all goods returned must be in a resaleable condition, with undamaged cartons and must be in complete box quantities or minimum sales quantities; (ii) goods that are specialised or that have been modified in any way from standard will not be eligible to be returned; (iii) the Company will not collect goods from the Purchaser; and (iv) a handling charge (to cover the Company’s costs of restocking, transport and administration) will be deducted from any credit allowed by the Company; the handling charge will be calculated on the basis of 30% of the value of the returned goods, subject to a minimum handling charge in all cases of £100. (v) luminaires that are sold within the UK when it reaches the end of its useful life, may be returned for recycling, subject to our Conditions of Sale.

18. INTELLECTUAL PROPERTY (a) The Purchaser will indemnify the Company against all damages, penalties, costs, losses and expenses suffered by the Company, or for which it may become liable, in respect of the infringement of any intellectual property including (but without limitation) any patent, copyright, registered design, trade mark, trade name or knowhow arising out of the Company’s manufacture of goods or the application of any process to the goods in accordance with any specification, design, drawings or other data supplied by the Purchaser or its servants or agents. (b) All drawings descriptions and other information submitted by the Company, together with the copyright therein, shall remain the property of the Company.

19. FORCE MAJEURE The Company shall be entitled without liability on its part and without prejudice to its other rights, to terminate the contract or any unfulfilled part thereof or at its option to suspend or make partial deliveries or extend the time or times for delivery, if the manufacture of the goods by the Company or the Company’s suppliers, or the delivery of the goods or the performance by the Company of any of its obligations under the contract is hindered or delayed whether directly or indirectly by reason of the Purchaser failing to furnish necessary instructions or information, or by war or other hostilities, acts of terrorism, protests, riot, civil commotion, act of God, government action or legislation, interruption of transport, strike, fire, explosion, flood, epidemic lockout or other form of industrial action (including, without limitation, labour disputes with the Company’s or any subcontractor’s employees), accidents or stoppages to works, shortage of labour, materials, equipment, fuel or power, breakdown of machinery or any other cause whatsoever beyond the reasonable control of the Company or its subcontractors, whether or not such cause exists at the date of the order provided that if the event in question continues for a continuous period in excess of [90] days, the Purchaser shall be entitled to give notice in writing to the Company to terminate the contract.

20. PASSING OF PROPERTY AND RISK (a) Risk of damage to or loss of the goods shall pass to the Purchaser: (i) in the case of goods to be delivered at the Company’s premises, at the time when the Company notifies the Purchaser that the goods are available for collection; or (ii) in the case of goods to be delivered otherwise than at the Company’s premises, at the time of delivery, or, if the Purchaser wrongfully fails to take delivery of the goods, the time when the Company has tendered delivery of the goods. (b) Notwithstanding delivery and the passing of risk in the goods, or any other provision of these Conditions, the property in the goods shall not pass to the Purchaser until the Company has received in cash or cleared funds payment in full of the price of the goods and all other goods agreed to be sold by the Company to the Purchaser for which payment is then due. (c) Until such time as the property in the goods passes to the Purchaser, the Purchaser shall hold the goods as the Company’s fiduciary agent and bailee, and shall keep the goods separate from those of the Purchaser and third parties and properly stored, protected and insured and identified as the Company’s property, but shall be entitled to resell or use the goods in the ordinary course of its business. (d) Until such time as the property in the goods passes to the Purchaser (and provided the goods are still in existence and have not been resold), the Company shall be entitled at any time to require the Purchaser to deliver up the goods to the Company and, if the Purchaser fails to do so forthwith, to enter upon any premises of the Purchaser or any third party where the goods are stored and repossess the goods and the Purchaser grants to the Company and its agents and employees an irrevocable licence at any time to enter any premises where the goods are or may be stored in order to inspect them or, where the Purchaser’s right to possession has terminated, to recover them. (e) The Purchaser shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the goods which remain the property of the Company, but if the Purchaser does so all moneys owing by the Purchaser to the Company shall (without prejudice to any other right or remedy of the Company) forthwith become due and payable.

21. INSOLVENCY OF PURCHASER (a) This Condition applies if: (i) the Purchaser becomes insolvent or makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or (ii) an encumbrancer takes possession, or a receiver or administrative receiver is appointed, of any of the property or assets of the Purchaser; or (iii) the Purchaser ceases, or threatens to cease, to carry on business; or (iv) the Company reasonably apprehends that any of the events mentioned above is about to occur in relation to the Purchaser and notifies the Purchaser accordingly. (b) If this Condition applies: (i) without prejudice to any other right or remedy available to the Company, the Company shall be entitled to cancel the contract or suspend any further deliveries under the contract without any liability to the Purchaser, and if the goods have been delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary; and (ii) the Purchaser shall have a duty to immediately bring to the notice of any receiver, administrator or any such person or persons appointed the existence and content of Condition 19 of these Conditions (Passing of Property and Risk) and the rights of the Purchaser to use or trade on the Company’s goods shall immediately terminate and any such receiver, administrator or other person or persons appointed will not be entitled to use or to trade on the Company’s goods unless so authorised in writing by the Company.

22. ARBITRATION If at any time any question, dispute or difference whatsoever shall arise between the Purchaser and the Company upon or in relation to or in connection with the contract, either party may give the other notice in writing of the existence of such question, dispute or difference, and the same shall be referred to the arbitration of a person to be mutually agreed upon, or failing agreement within 30 days of receipt of such notice, of some person appointed by the President for the time being of the Chartered Institute of Arbitrators. A submission to arbitration under this Condition shall be deemed to be a submission to a sole arbitrator pursuant to the Arbitration Act 1996 or any statutory modification or re-enactment thereof. Any such arbitration shall be held in London, England.

23. GOVERNING LAW AND JURISDICTION (a) All contracts to which these Conditions apply shall be governed by and construed in accordance with English Law. (b) Subject to Condition 21 hereof, the Purchaser agrees to submit to the nonexclusive jurisdiction of the English courts.

24. MISCELLANEOUS (a) Each right or remedy of the Company under the contract is without prejudice to any other right or remedy of the Company whether under the contract or not. (b) A notice required or permitted to be given by either party to the other under these Conditions shall be in writing and addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice. Notices shall be deemed to have been received (i) if sent by prepaid first class post, 2 days after posting; (ii) if delivered by hand on a working day prior to 4:00pm, on the day of delivery and otherwise on the next working day; (iii) if sent by facsimile on a working day prior to 4:00pm, at the time of transmission and otherwise on the next working day. (c) No waiver by the Company of any breach of the contract by the Purchaser shall be considered as a waiver of any subsequent breach of the same or any other provision. (d) If any provision of these Conditions is held by a court or other competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of the contract and the remainder of the provision in question shall not be affected.

April 2008

02

orbik THE LIGHTING SPECIALISTS

visit: www.orbik.co.uk

95

INTRODUCTION

ORBIK The Lighting Specialists

Contents

ORBIK’s journey began in 1982 when they quickly developed into a respected manufacturer of high quality, reliable, emergency lighting control gear, supplying lighting manufacturers across the UK.

Luminaire product finder

04

New products

06

ORBIK’s continual policy of commitment to quality quickly gained the approval of many major lighting companies and their ability to maintain high standards of customers service quickly confirmed ORBIK as a leader in the supply of lighting and emergency lighting products.

Luminaires

07

Legends

65

Photometric data

66

Design guide

68

Self contained emergency gear (conversion kits)

71

Low voltage emergency lighting

80

Inverters for use with central systems

84

Central systems

86

Addressable emergency lighting systems

90

Digital self testing systems

93

Electronically controlled emergency lighting

94

Conditions of sale

95

ORBIK’s passion towards maintaining successful partnerships with customers enabled new markets to be explored and this rapidly expanded ORBIK’s range of products which now includes a comprehensive range of emergency control gear for linear and compact fluorescent lamps, central battery systems, inverters, mains and emergency lighting luminaires, static inverter systems self test and addressable emergency systems and now with a range of LED mains and emergency luminaires to support the challenges of reducing carbon footprint.

ORBIK’s Head Office is based in Aldridge situated in the West Midlands region of England and their in-house state-of-the-art production, high precision metal engineering and powder coating facilities has enabled ORBIK to confidently design and supply a wide range of competitively priced lighting products and systems.

Quality is assured with ORBIK’s purpose built factory, which is registered to and audited by BSI for their ISO 9001/2008 quality system. With over 300 kite marked BSI approved products, ORBIK’s dedication towards their consistent high quality manufactured products allows their customers to confidently specify ORBIK as their provider of solutions.

Quality products made in the UK. IC I CEIELC LEL I

FM09128

NDUSTRY COMMITTEE I LIGHTING FOR EMERGENCY LIGHTING FOR EMERGENCY INDUSTRY COMMITTEE FOR EMERGENCY LIGHTING

visit: www.orbik.co.uk

NDUSTRY COMMITTEE

03

Luminaire product finder

Luminaire Product Finder W

09

Cadiz

11

P

Chella 8W or LED recessed polycarbonate luminaire with optional exit legend featuring LED light-pipe

8W polycarbonate bulkhead with clip-fit diffuser

12

Calabor Recessed 8W or

LED luminaire with metal frame and optional plasi-glas exit legend

NE

NE

W

W

IO RS VE

IO RS VE

17

N

N

!

14

P

N

P

Bewdley 8W IP65 polycarbonate/metal base bulkhead featuring fresnel diffuser

IO RS VE

N

08 W NE

13

NE

IO RS VE

8W IP65 polycarbonate bulkhead featuring soft ARC linear lens diffuser

W

P

Arc

NE

07

N

N

IO RS VE

IO RS VE

W

W

NE

NE

P

18

19

P

P

P

P

P

Dart

Dual Fire-rated die-cast down-lights for halogen compact fluorescent and LED lamps

Dalby Shallow surface/recessed 8W or LED polycarbonate luminaire with LED light-pipe (exit legend option)

Dyode

Ecos Anti-ligature IP65 polycarbonate luminaire with radial lens option

LED downlight including emergency versions

24

N

IO

RS

VE

N

IO

RS

VE

N

IO

RS

VE

N

IO

RS

VE

23

W

W

W

W

22

NE

NE

NE

NE

20

Self-test LED recessed emergency downlight

26

P

P

P

P

P

Eden

Elled Self-test LED surface/ recessed self-contained emergency downlight with refractor lens

Geneva Recessed 8W or LED luminaire with metal frame and optional exit legend

Holt

Idro Circular aluminium die-cast IP65 bulkhead with optional eyelid and guard versions. LED options

8W or LED emergency IP65 bulkhead with fresnel lens

NE W

NE !

!

N IO

RS

W

W

VE

NE

27

29

IP65 square polycarbonate luminaire

31

32

33

P

P

P

P

P

Iona

Jaro IP65 wall pack for 70W HQI and compact fluorescent with integral emergency

Kandel Circular surface/semi

Kalix Architectural surface mounted wall-light with integral emergency options

Karis Architectural curved luminaire with integral emergency options for surface/suspension mounting

Square IP65 bulkhead with optional eyelid and guard options

recessed IP54 luminaire with twist and lock diffuser

W

NE

NE

35

36

!

N IO RS

W

VE

34

38

40

P

P

P

P

P

Kea

Lavaine Surface mounted

Larino

Lens Circular luminaire with

Leah Circular IP65 polycarbonate

Curved wall-light with integral emergency options

04

circular decorative luminaire with integral emergency options

Circular luminaire with integral emergency in three sizes

optional halo-effect back light and integral emergency versions

luminaire with optional trims and integral emergency versions

orbik THE LIGHTING SPECIALISTS

Luminaire product finder

Category Key We have introduced a category key to help you identify the product which best suits the application you require - mains, emergency and LED luminaires.

Luminaires marked ‘NEW’ are additions to our range those marked ‘NEW VERSION’ are revised versions of popular models. See luminaire pages for full details.

MAINS LUMINAIRES

EMERGENCY LUMINAIRES

LED LUMINAIRES

= feature not supported.

IO RS VE

47

N

44

W

N

N

N

!

IO RS VE

IO RS VE

IO RS VE

43

NE

W

W

W

W NE

NE

NE

NE

42

48

P

P

P

P

P

Mezzina IP65 circular

Monza Compact fluorescent

Multia HQI/compact fluor-

Ordbey 250W/400W HQI high performance low bay with optional integral emergency version

Odet Twinspot emergency

polycarbonate luminaire with techno radial lens technology

downlighter with optional attachments and emergency versions

escent downlighter with optional attachments and emergency versions

floodlight with IP65 and self-test versions options

NE W !

49

50

51

52

53

P

P

P

P

P

Orbe Compact fluorscent

Olten High bay luminaire with

Napoli

pescara

Pescara-G

low-bay with optional high-output Integral emergency versions

prismatic refractor for HQI and compact fluorescent lamps with emergency options

Slim profile injection moulded polycarbonate exit sign

Single or double sided 8W exit sign with self test and IP65 versions

NE

NE

NE

W

W

W

55

N IO

RS

VE

N IO

RS

VE

N IO

RS

VE

54

Single and double sided exit sign 90M viewing distance

57

58

59

P

P

P

P

P

Petina

Pico

Quarto

Retz

Rota

Ultra slim LED single/double sided exit sign

Low profile 8W and LED single sided exit box

4 sided exit sign for surface mounting/suspension options

Curved low profile 8W exit sign single/double sided

LED exit sign for wall/ceiling mounted with plasi-glas legend

W NE N

IO

RS

VE

61

62

63

64

P

P

P

P

Romney

Savona

Savona Petite

Tiel

LED exit sign with optional wall brackets and suspension kit

visit: www.orbik.co.uk

Chain suspended/recessed 8W or LED exit sign single/double sided

Chain suspended LED white single/ double sided exit sign

IP65 single/double sided polycarbonate exit sign

05

Luminaires NEW PRODUCTS

New Products Dual p14

Leah p40

Olten p50 Ordbey p47

IONA p27

Jaro p29

High Power LED Conversion Kits p82

06

orbik THE LIGHTING SPECIALISTS

NEW VERSION Luminaires

Arc

IP65 compact bulkhead with soft arc linear lens diffuser for improved performance Completely manufactured in the UK, Arc was the first luminaire on the market to feature a Soft Arc Linear Lens Diffuser designed to provide maximum spacings between emergency luminaires. Even today, very few products are able to meet Arc’s optical performance. The lens also makes Arc an excellent mains lighting option with T5 or Compact Fluorescent lamps.

Arc offers many other features with its compact polycarbonate enclosure. These include a screw fixing diffuser located with brass threaded inserts, centre rear besa entry and 20mm conduit knockouts at each end plus a hinged steel gear tray for ease of installation. Making this product one of the most flexible and best performing luminaires on the market.

The Arc can be fitted with a self adhesive legend SAL 1 kit to create an exit sign or with a semi-recessing trim, suitable for use with suspended or plaster board ceilings.

Arc surface mounting luminaire

Mains Luminaires Cat No. AR 8 AR 2x8 AR 11

Arc with brass semi-recessed trim Lamp 1 x 8W 300mm 2 x 8W 300mm 11 W TC-S

Lumens - - -

Emergency Luminaires Cat No. Mode/Lamp Lumens* AR8/NM3 NM3 8W 300mm 80E

120S

180H AR8/M3 M3 8W 300mm 80E

120S

180H AR2x8/NM3 NM3 2x8W 300mm 150S

250H AR/LED/M3 NEW NM/M3 LED Slave Luminaires Cat No. AR8/#/D AR8/LED/#D NEW

Kg 0.90 0.90 0.90

Kg 1.20

1.45

1.70

SAL1 provides several exit legend options.

Viewing distance 18 metres

1.20 Options Suffix:

Mode/Lamp Slave 8W Luminaire Slave LED

Lumens* 275 -

Kg 0.85 1.20

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 350mm x Width 108mm x Depth 80mm Cut out dimensions: Length 330mm x Width 90mm

KM31508

visit: www.orbik.co.uk

/E Economy Output /S Standard Output /H High Output AR/WH White Finished Semi-recess Trim AR/BR Brass Finished Semi-recess Trim AR/CH Chrome Finished Semi-recess Trim /SAL 1 Self-adhesive exit legend kit /VR Anti-tamper Screws /HPF Power Factor Corrected /O Opal Diffuser /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /TS Push to Test Switch

07

Luminaires NEW VERSION

Bewdley

Robust IP65 bulkhead for exterior or interior use Designed for use as either a mains bulkhead, or as a robust solution to emergency lighting requirements, Bewdley has proven to be an outstanding performer.

Its tough all polycarbonate housing is combined with useful features including a hinged steel gear tray, rear centre besa entry drill starts and 20mm end conduit entries.

Bewdley is supplied with a white base and clear fresnel diffuser as standard and a black base, or opal fresnel diffuser are available as options.

An attractive metal base version sealed to IP65 is also available.

Bewdley with fresnel diffuser

Bewdley with opal fresnel diffuser

SAL2 provides several exit legend options.

Viewing distance 22 metres Options Suffix: /S Standard Output /E Economy Output /H High Output BE/WH White Finished Semi-recess Trim BE/BR Brass Semi-recess Trim BE/CH Chrome Recessing Flange SAL2 Self-adhesive exit legend /VR Anti-tamper Screws /HPF Power Factor Corrected /PH Dawn/Dusk Photo cell /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /TS Push to Test Switch /BK Black Base /OP Opal Fresnel Diffuser /M IP65 White Metal Base /-25C Freezer Option

08

Mains Luminaires Cat No. BE1x8 BE2x8 BE11 BE2x11 BE118

Lamp 1x8W 300mm 2x8W 300mm 11W TC-S 2x11W TC-S 1x18W TC-L

Lumens - - - - -

Kg 1.20 1.25 1.25 1.35 1.50

Kg 1.70

BE2x8/NM3 NM3 2x8W 300mm

BE/LED/M3 NEW NM/M3 LED

Lumens* 80E 120S 180H 80E 120S 180H 80E 120S 180H 150E 250S -

Slave Luminaires Cat No. BE8/#/D BE8/PVR/# BE/LED/#/D NEW

Lumens* 275 275 -

Kg 1.00 1.20 1.40

Emergency Luminaires Cat No. Mode/Lamp BE8/NM3 NM3 8W 300mm

BE8/M3 M3 8W 300mm

BE8/C3 C3 8W 300mm

(1 lamp mains, 1 NM3)

Mode/Lamp Slave 8W AC/DC Mains/Slave 8W changeover Slave LED

1.90

1.90

2.20 1.40

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 370mm x Width 140mm x Depth 105mm Cut out dimensions: Length 365mm x Width 135mm

KM31508

orbik THE LIGHTING SPECIALISTS

Luminaires

Cadiz

Practical emergency bulkhead for interior use with clip-fit diffuser Cadiz is the perfect solution to emergency lighting needs in all interior applications where a clip-fit diffuser is acceptable.

Cadiz is designed for rapid and easy installation with a hinged, clip-out steel gear tray with pre-formed centre rear besa entry with fixing holes. The body of the luminaire is injection moulded polycarbonate, along with the diffuser, which incorporates etched areas to partially obscure the lamp from view.

Cadiz surface mounted

Robust, low cost, fast to install, easy to clean and maintain, Cadiz is an ideal product for offices, retail outlets and similar premises, particularly where cost is critical but a reliable and an efficient product is required.

The Cadiz semi-recessing trim provides a neat surround to this product and is available in white, brass or chrome.

Cadiz semi-recessed with white trim

Emergency Luminaires Cat No. Mode/Lamp CAD8/NM3 NM3 8W 300mm

CAD8/M3 M3 8W 300mm

CAD2x8/NM3 NM3 2x8W 300mm

Slave Luminaires Cat No. CAD8/#/D

Lumens* 80E 120S 180H 80E 120S 180H 150E 250S

Kg 1.20

1.45

1.75

SAL1 provides several exit legend options.

Viewing distance 18 metres Options Suffix:

Mode/Lamp Slave 8W AC/DC

Lumens* 275

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 350mm x Width 108mm x Depth 80mm Cut out dimensions: 335mm x 107mm

IP42 KM31508

visit: www.orbik.co.uk

Kg 1.00

/E Economy Output /S Standard Output /H High Output CAD/WH White Finished Semi-recess Trim CAD/BR Brass Finished Semi-recess Trim CAD/CH Chrome Finished Semi-recess Trim /SAL1 Self-adhesive Exit Legend Kit /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /TS Push to Test Switch /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire

09

The perfect model for any location.

NEW VERSION Luminaires

Chella

Stylish and versatile recessed polycarbonate luminaire or exit sign with LED option.

Chella is an affordable recessed polycarbonate luminaire available in long life LED or 8W Fluorescent versions.

Supplied in White as standard, the Chella range of luminaires are available in chrome or brass to order.

Chella luminaires all utilise a hinged gear tray for ease of installation and the range of products includes mains, 3 hour maintained and non-maintained emergency versions with slave, addressable and self-test emergency options available.

Chella’s design allows all versions to be utilised as a stylish edge-lit exit sign by specifying the optional legend. The attentionto-detail is illustrated with the effective light-pipe design, which enables the charge LED indicator to be clearly visible.

Other options available for Chella include slave versions for central battery or static inverter systems, self test and intelligent addressable gear.

Mains Luminaires Cat No. CHE1X8 CHE2X8 CHE11

Lamp 1X8W 300mm 2X8W 300mm 11W TC-S

Chella with white trim

Lumens - - -

Kg 1.00Kg 1.00Kg 1.00kg

Emergency Luminaires Cat No. Mode/Lamp CHE8/NM3 NM3 8W 300mm

CHE8/M3 M3 8W 300mm

CHE2X8/NM3 NM3 2x8W 300mm

CHE/LED/M3 NEW LED M3

Lumens* 80E 120S 180H 80E 120S 180H 240E 360S -

Kg 1.50Kg

Slave Luminaires Cat No. CHE8/#/D CHE/LED/#/D NEW

Lumens* 275 -

Kg 1.00Kg 1.30kg

Mode/Lamp Slave 8W AC/DC Slave Slave LED

1.80Kg

KM31508

visit: www.orbik.co.uk

Chella with brass trim and recessed legend (IP20) Viewing distance 32 metres

1.55Kg 1.80Kg

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 380mm x Width 150mm Edge-Lit Versions: Length 380mm x Width 150mm Cut-Out: Length: Length 360mm x Width 130mm (70mm Min Ceiling Void) Viewing Distances: 27 metres Legend: Length 300mm x Width 173mm

IP20/44

Chella with chrome trim

For all Legend details See Page 65

Options Suffix: /H High Output /E Economy Output /S Standard Output /BR Brass Finish /CH Chrome Finish /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /EX Exit Version (IP20)

11

Luminaires NEW VERSION

Calabor

Fully recessed 8W or LED emergency luminaire for interior use Calabor is an attractive, fully recessed emergency luminaire available in white as standard with brass and chrome as options. The Calabor features a robust galvanised body which recesses fully into the ceiling and only requires a ceiling depth of 90mm. Within the fitting a hinged, removable gear tray facilitates easy fixing and maintenance whilst the front trim plate with a diffuser ensures a neat and attractive finish.

Standard models are supplied with a prismatic polycarbonate diffuser but this can be supplied in opal if preferred.

Calabor is available as a recessed edge-lit exit sign, with an exit fascia manufactured from Plasi-Glas, a light conducting flame retardant plastic almost impossible to distinguish from glass, but with the strength of plastic.

Calabor is also available with long life light emitting diode (LED) light sources.

A version with 11 watt TC-S lamps is available for use as a rectangular downlight mains luminaire and combined emergency version.

Calabor in white finish

Calabor in brass finish

Calabor in chrome finish with exit legend Viewing distance 32 metres

Options Suffix: /H High Output /E Economy Output /S Standard Output /BR Brass Finish Fascia /CH Chrome Finish Fascia /HPF Power Factor Corrected /OP Opal diffuser /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /EX Exit Version

12

Mains Luminaires Cat No. CAL 1x8 CAL11 CAL2x11

Lamp 8W 300mm 11W TC-S 2x11W TC-S

Lumens - - -

Kg 2.20 2.25 2.40

Emergency Luminaires Cat No. Mode/Lamp CAL8/NM3 NM3 8W 300mm

CAL2x8/NM3 NM3 2x8W 300mm

CAL8/M3 M3 8W 300mm

CAL11/8/C3 C3 11W TC-S + 8W 300mm CAL/LED/M3 NEW M3 LED

Lumens* 80E 120S 180H 240E 360S 80E 120S 180H 120S -

Kg 2.70

Slave Luminaires Cat No. CAL8/#/D CAL11/#/PVR CAL/LED/#/D NEW

Lumens* 275 650 -

Kg 2.10 2.10 2.10

Mode/Lamp Slave 8W AC/DC Mains/Slave 11W Changeover Slave LED

3.00 2.90

2.90 2.20

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 410mm x Width 155mm x Depth 90mm Legend Drop: 175mm Cut out dimensions: Length 325mm x Width 130mm Ceiling Void 85mm min

KM31508

IP20

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

Luminaires

Dart

Compact LED downlight range Dart is a discreet mains or emergency downlight, designed to blend in with GU10 and GZ10 mains and low voltage luminaires.

Using the latest high output LED technology, it is aesthetically attractive, versatile and is virtually maintenance-free with a lamp life of approximately 50,000 hours.

The Dart packs feature high quality, battery cells and a silicone coated woven glass fibre sleeving.

Dart is available in white as standard but can also be supplied in brass and chrome finishes.

Dart in white finish

Dart emergency pack

Luminaires Cat No. DAR/LED/WH DAR/LED/BR DAR/LED/CH

Dart in brass finish Mode/Lamp White 3 x 1W Luminaire Brass 3 x 1W Luminaire Chrome 3 x 1W Luminaire

Mains & Emergency Luminaires Mode/Lamp Cat No. DAR/M3 M3 Emergency Pack DAR/MAINS Mains Pack

Lumens - - -

Kg 0.50 0.50 0.50

Lumens* - -

Kg 1.00 1.00

* Mains and emergency packs will operate up to two LED downlights * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Ø 80mm x 40mm Depth Dimensions Mains and Emergency Packs: Ø 75mm x 190mm Cut out dimensions: Ø 75mm

Dart in chrome finish

IP20 visit: www.orbik.co.uk

13

Luminaires NEW PRODUCT

Dual

Fire rated downlight for halogen LED and compact fluorescent lamps.

The Dual is a comprehensive range of fire rated downlights.

The robust diecast body comes with a twist and lock retaining bezel for ease of lamp removal. There is a wide range of options including tiltable, IP65 showerlights, and can be used with MR16, GU10, LED, 11W fluorescent and of course the Dart LED lamp. All of the lamps can be used for emergency options (see opposite page).

The luminaires come with a fixed and shrouded 3 way terminal block.

Dual downlights are fire tested and approved to a 90 minute rating to BS476 Part2/1987 and acoustically tested and approved to BSEN150 140-3 1995 and BSEN150 140-6 1998 respectively.

The use of Dual fire rated downlights removes the need for firehoods, and ensures compliance with building regulations.

Dual in white finish Dual in brass finish

Dual in chrome finish

Dual in satin-chrome finish

Options Suffix: /DLED /MR16 /50G /50M /5W /TX

Extra Low Voltage 3x1W LED Lamp Supply with MR16 Lampholder 50W GU10 Aluminium Reflector Lamp 50W MR16 Aluminium Reflector Lamp 5W 12V MR16 LED Lamp 60VA Electronic Transformer

The Dual range of luminaires, when used with 50W dichroic lamps, must use aluminium reflector lamps.

We advise that only branded reflector lamps are used with the Dual which project the heat forward reducing heat build up within the luminaire, and maintaining the 90 minute fire rating. The guarantee will be invaladated if these types of lamps are not used.

14

Luminaires Cat No. DU/WH DU/BR DU/CH DU/SC

Mode/Lamp Downlight White GU10 Downlight Brass GU10 Downlight Chrome GU10 Downlight Satin Chrome GU10

Kg 0.38 0.38 0.38 0.38

DU/TD/WH DU/TD/BR DU/TD/CH DU/TD/SC

Tiltable Downlight White GU10 Tiltable Downlight Brass GU10 Tiltable Downlight Chrome GU10 Tiltable Downlight Satin Chrome GU10

0.40 0.40 0.40 0.40

DU/SL/WH DU/SL/BR DU/SL/CH DU/SL/SC

IP65 Shower Light White GU10 (35W Lamp only) IP65 Shower Light Brass GU10 (35W Lamp only) IP65 Shower Light Chrome GU10 (35W Lamp only) IP65 Shower Light Satin Chrome GU10 (35W Lamp only)

0.43 0.43 0.43 0.43

DU/11W/WH DU/11W/BR DU/11W/CH DU/11W/SC

11W CFL GU10 Downlight White 11W CFL GU10 Downlight Brass 11W CFL GU10 Downlight Chrome 11W CFL GU10 Downlight Satin Chrome

0.42 0.42 0.42 0.42

DU/11W/SL/WH DU/11W/SL/BR DU/11W/SL/CH DU/11W/SL/SC

IP65 11W CFL Shower Light White IP65 11W CFL Shower Light Brass IP65 11W CFL Shower Light Chrome IP65 11W CFL Shower Light Satin Chrome

0.43 0.43 0.43 0.43

SUPPLIED LESS LAMP Dimensions: Downlight Ø 115mm (125mm for 11W) x 92mm Cut out 74mm Tilted Downlight Ø 115mm (125mm 11W) x 105mm Cut out 85mm Shower Light Ø 135mm (145mm 11W) x 87mm Cut out 74mm

IP20/65 orbik THE LIGHTING SPECIALISTS

NEW PRODUCT Luminaires

Dual Emergency Lighting Options Low Voltage Lighting Train for 12V MR16 lamps up to 50W Orbik’s low voltage lighting train enables 12 volt Tungsten Halogen lamps to operate in the event of a power failure. The ability to feed the lighting train through ceiling aperture cut-outs of 60mm ensures easy installation.

The low voltage lighting train features high quality, high temperature Nickel Cadmium battery cells of 1 hour duration and Nickel Metal Hydride for 3 hour duration, and a silicone coated woven glass fibre sleeving ensure’s the product complies with to BS/EN61347-2-7 and EN60598.2.22. The lighting train also allows dimming of the Halogen lamps if required.

Dimensions (millimetres) Overall Length: 740mm (1 hour) and 800mm (3 hour) Lighting Train can fit through Ceiling Cut-Outs of 60mm or above

Tungsten halogen lamp

Cat No. R960/50/NM1 R960/50/M1 R961/50/M1 R962/50/NM3 R962/50/M3 R963/50/M3

Mode Non-Maintained Maintained (with transformer) Maintained (without transformer) Non-Maintained Maintained (with transformer) Maintained (without transformer)

Lamp 50/20W 12V 50/20W 12V 50/20W 12V 50/20W 12V 50/20W 12V 50/20W 12V

Duration (1x20W) 3 Hours 3 Hours 3 Hours 3 Hours 3 Hours 3 Hours

Duration (1x50W) 1 Hour 1 Hour 1 Hour 3 Hour 3 Hour 3 Hour

Ballast Lumen Factor 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6%

NEW LED Self Testing Low Voltage Lighting Train for 12V MR16 LED Lamps up to 6W 3 hours Our low voltage LED lighting train enables 12 volt MR16 LED lamps to operate in the event of a power failure. The ability to feed the lighting train through ceiling aperture cut-outs of 60mm ensures easy installation.

The lighting train is available in Maintained mode (but can be used non-maintained), and is supplied with an integral driver which operates the lamp in mains healthy and in the event of a power failure.

The low voltage lighting train features high quality, high temperature Nickel Metal Hydride battery cells and a silicone coated woven glass fibre sleeving ensuring the product is manufactured to comply with EN61347.2.13 and EN60598.2.22.

Dimensions (millimetres) Overall Length: 740mm Lighting Train can fit through Ceiling Cut-Outs of 60mm or above.

Cat No. RL5012/6/M3

Mode Maintained (with integral mains driver)

LED lamp

Lamp 1.5/6W 12V

Duration 3 Hours

Ballast Lumen Factor 3 and 6W 100%

For emergency options for 11W CFL and GU10 see our Mini-Sine on page 88

visit: www.orbik.co.uk

15

Form and function.

NEW VERSION Luminaires

Low profile 8W or LED emergency surface/recessed luminaire/exit sign

Dalby

Manufactured from Flame-Retardant Polycarbonate, this elegantly designed IP55 Luminaire is suitable for almost any prestigious application.

Dalby can be used for surface or recessed mounting (when recessed only 25mm protrudes below the ceiling) and with the addition of a Self-Adhesive Legend, a simple but attractive Exit sign is created.

The Dalby design also offers an Edge-Lit Exit sign version which can be confidently specified for projects including Hotels and Reception areas.

Dalby’s diffuser design incorporates a light-pipe ensuring the LED charge indicator is visible in all modes.

DalbyExit recessed with edge lit exit legend Viewing distance 32 metres

Dalby surface mounted

Mains Luminaires Cat No. DAL8

Lamp 8W 300mm

Emergency Luminaires Cat No. Mode/Lamp DAL8/NM3 NM3 8W 300mm

DAL8/M3 M3 8W 300mm

DAL/LED/M3 NEW NM/M3 LED

Slave Luminaires Cat No. Mode/Lamp DAL8/#/D Slave 8W Luminaires DAL/LED/#/D NEW Slave LED

Lumens -

Kg 1.35

Lumens* 80E 120S 180H 80E 120S 180H -

Kg 1.80

Lumens* 275 -

Kg 1.10 1.10

2.00

1.80

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 but for 1 hour duration becomes /NM1 Dimensions: Length 355mm x Width 195mm x Depth 70mm Legend Size: 175mm Cut out dimensions: Length 335mm x Width 175mm

For all Legend details See Page 65

visit: www.orbik.co.uk

IP55/IP20

KM31508

SAL2 provides several exit legend options.

Viewing distance 22 metres Options Suffix: /H High Output /E Economy Output /S Standard Output /SAL2 Self-adhesive Exit Legend Kit /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /TS Push to Test Switch /EX/L+ Edge-lit Exit Kit /R Recessing Kit

17

Luminaires NEW VERSION

Dyode

Unique fully recessed LED emergency luminaire.

At just 50mm in diameter Dyode is one of the smallest recessed LED based emergency luminaires currently available and the superbly designed refractor lens assembly which is incorporated into a high quality injection moulded housing offering an IP20 protection rating accentuates the virtues of the high power white LED light source. By utilizing a specially developed LED driver and advanced thermal engineering techniques to dramatically reduce the LED operating temperature the light output level from the LED is guaranteed throughout the full emergency duration, ensuring the life of the LED exceeds 50,000 hours.

Two versions of the advanced lens designs are available. One specifically for corridor lighting (CR) offers an elongated distribution pattern to efficiently illuminate the centre line of escape route corridors and extends the spacing distance between luminaires. The second offers a more traditional cone distribution pattern for use in open areas (OA) or for specific task lighting. These unique features allow the emergency lighting scheme designer the option of incorporating Dyode into an existing mains only luminaire, to create an unobtrusive low maintenance integrated emergency luminaire.

Alternatively they can be used in stand alone applications for emergency lighting.

The control circuitry is housed in a robust metal assembly and along with the Ni-MH battery pack is contained within a high quality flexible silicone sleeve which can easily pass through the 40mm cut out required for Dyode when mounted independently in a ceiling void.

All Dyode products are available with a self-test facility as an option which includes a volt-free contact.

Actual size

Key Features: • 50 mm diameter • Refractor lens • A specially developed LED Driver • Life of LED exceeds 50,000 hours • NI-MH battery pack • LED Self-test facility

Options Suffix: /CR Corridor Lens (must be factory fitted) /ST Self Testing Luminaire /TM14 14 Minute Timer Delay for use with Discharge Lamp schemes

The open area lens (OA) will be supplied as standard. The corridor lens (CR) is an option. The required lens must be specified when ordering because it cannot be changed on site.

Dyode NM3/M3 emergency pack

Mains Luminaires Cat No. DY/LED/230A/OA NEW

Lamp LED Open Area

Lumens* 75

Kg 0.1

Emergency Luminaires Cat No. DY/LED/NM3/OA DY/LED/M3/OA NEW

Mode/Lamp NM3 LED Open Area M3 LED Open Area

Lumens* 75 75

Kg 0.1* 0.1*

Slave Luminaires Cat No. DY/LED/#/D/OA NEW

Mode/Lamp Slave LED Open Area

Lumens* 75

Kg 0.1*

* Emergency Lumens * For other durations, specify the required time period e.g. /NM3 but for 1 hour duration becomes /NM1 * The specified weight does not include Dyode Emergency pack, add 0.4kg # Suitable for 110V and 220 V AC/DC systems Dimensions: Ø 50mm x 32mm depth (22mm above ceiling) Cut out dimensions: Ø 40mm

IP20

18

orbik THE LIGHTING SPECIALISTS

Luminaires

Ecos

IP65 robust polycarbonate luminaire for interior and exterior use Over 1.4 kilograms of UV stabilised, flame retardant polycarbonate is used in each Ecos body and its sheer toughness has been illustrated by its successful use in police and magistrates cells, military establishments, schools and public areas.

Ecos is sealed to IP65 as standard with clear ‘Radial’ lens for enhanced photometric performance and with a white base. It is available with 2D lamps ranging from 28 to 55 Watts and 24W compact lamps.

Versions up to 2 x 24W can have integral emergency gear.

All versions have a hinged steel gear tray, and a white base as standard. Ecos can also be recessed with an optional white trim, which allows it to be considered for anti-ligature applications.

An optional Microwave Presence Detector integrally mounted allows presence detection and switching utilising lux level sensing including a time-delay function.

Ecos with white base and clear diffuser Mains Luminaires Cat No. EC28 EC38 EC55 EC218 EC2x24

Lamp 28W 2D 38W 2D 55W 2D 2x18W TC-L 2x24W TC-F

EC40 EC40/22

40W T5 Circular 40W and 22W T5 Circular

Lumens - - - - -

Kg 2.80 2.80 2.80 2.80 2.90

- -

2.80 2.80

Emergency Luminaires Cat No. Mode/Lamp Lumens* EC218/M3 M3 2x18W TC-L (one lamp M3) 120

Kg 3.10

EC2x24/M3

M3 2x24W TC-F (one lamp M3)

120

3.20

EC28/M3 EC38/M3 EC40/M3

M3 28W 2D M3 38W 2D M3 40W T5 Circular

270 625 370

3.10 3.10 3.10

Slave Luminaires Cat No. EC28/PVR/# EC38/PVR/#

Mode/Lamp Mains/Slave 28W 2D Mains/Slave 38W 2D

Lumens* 500 500

Kg 2.90 2.90

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions Standard: Ø 397mm x 132mm Dimensions With Recess Trim: Ø 406mm x 86mm x 46mm into void Cut out dimensions: Ø 395mm

KM31508

visit: www.orbik.co.uk

Ecos with white semi-recessing trim and opal diffuser

Options Suffix: /ECR/WH White Semi Recessing Trim /BK Black base /VR Anti-tamper Screws /HPF Power Factor Corrected /ST Self Testing Luminaires /O Opal Diffuser /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /TS Push to Test Switch /PH Dawn/Dusk Photo Cell /MD Microwave Prescence detector

19

Luminaires

Eden

IP65 compact bulkhead with fresnel lens for improved light distribution with an led option Eden is an attractive weatherproof IP65 luminaire available in both Non-Maintained and Maintained emergency modes. It can be supplied with an 8W T5 fluorescent lamp or alternatively using LED’s with a life of approximately 50,000 hours.

The Eden body is manufactured in white flame retardant polycarbonate.

Eden’s polycarbonate diffuser incorporates a Fresnel lens, ensuring excellent light distribution.

To aid rapid installation, Eden is fitted with a hinged geartray and has side and rear entry points moulded into the base.

Eden is available with a number of options including semirecessing kits and self-adhesive exit legends.

Eden with white semi-recessing trim

SAL1 provides several exit legend options.

Viewing distance 18 metres

Options Suffix:

Emergency Luminaires Cat No. Mode/Lamp ED8/NM3/E NM3 8 Watt 300mm ED8/M3/E M3 8 Watt 300mm ED/LED/M3 LED NM/M3 ­

Lumens* 80 80 -

Kg 1.20 1.45­ 1.20

* Emergency Lumens Dimensions: Length 350mm x Width 108mm x Depth 80mm Dimensions (Semi-Recess Cut-Out): Length 330mm x Width 90mm­­­­

/ED/BR Brass Semi-Recess Kit /ED/CH Chrome Semi-Recess Kit /ED/WH White Semi-Recess Kit /SAL1 Self-Adhesive Legend Kit

20

orbik THE LIGHTING SPECIALISTS

Elled, p22.

Small yet perfectly formed.

Luminaires NEW VERSION

Elled

Distinctive ceiling mounted led emergency luminaire including cold store options Elled is a fully self contained, high power white LED light sourced emergency lighting luminaire which has been designed to seamlessly blend into lighting schemes by imitating the design ethics of fire detection and CCTV head units.

Amongst its many innovative features is the use of an advanced design of LED driver, which provides a constant level of illumination throughout the emergency duration and ensure the LED operating temperature is at an optimum ensuring an LED life in excess of 50,000 hours. The use of Ni-MH cells and monitored charging combined with RoHS compliant components and a polycarbonate enclosure ensures a low in service environmental impact and easy disposal at the end of life.

To provide the ultimate spacing between luminaires on emergency exit corridor routes and to ensure the requirements of EN1838 can be easily met, the sophisticated photometrically optimised refractor lens gives a type 1 light distribution pattern, whereas, for open areas (OA) or specific task illumination a second lens option can be specified that provides the more traditional cone of light (CR).

The open area lens (OA) will be supplied as standard.

The corridor lens (CR) is an option. The required lens must be specified when ordering because it cannot be changed on site.

Automatic self-testing versions can be specified which conform to the requirements of BS EN62034:2006 and conduct testing in accordance with BS EN50172:2004. Self-testing versions provide both a visual and an audible test failure indication and the results of the last test are displayed via a multi-coloured LED indicator. A volt-free contact is made available allowing a simple system fault monitoring facility to be incorporated into the system.

A NEW freezer version has been produced suitable for ambients down to -30ºC.

Chrome surface trim

White surface trim

Options Suffix: /CR Corridor Lens (must be factory fitted) /ST Self Testing Luminaire /WH White surface trim /BR Brass surface trim /CH Chrome surface trim /-30C Suitable down to -30ºC ambient /R Recessing kit

22

Mains Luminaires Cat No. ELL/LED/230A/OA NEW

Lamp LED OPEN AREA

Emergency Luminaires Cat No. Mode/Lamp ELL/LED/NM3/OA Slave Luminaires Cat No. Mode/Lamp ELL/LED/#/D/OA NEW

Lumens* 45

Kg 0.5

Lumens* NM3 LED OPEN AREA

Kg 45

0.5

Lumens* Slave LED OPEN AREA

Kg 45

0.5

* Emergency Lumens # Suitable for 110V and 220 V AC/DC systems Dimensions: Ø 120mm x 67mm depth (35mm above ceiling) Cut out dimensions: Ø 100mm

IP55 orbik THE LIGHTING SPECIALISTS

NEW VERSION Luminaires

Geneva

Stylish recessed fluorescent and LED luminaire Geneva is an impressive design of high quality recessed emergency lighting luminaires.

Available in white, chrome or brass finishes, Geneva is manufactured in steel with an epoxy coating to create a robust, simplistic but unobtrusive and elegant luminaire, suitable for almost any prestigious retail application. The Geneva range of emergency luminaires can be specified as an 8W Fluorescent or LED Luminaire that offers long lamp life of up to 50,000 hours. Its prismatic lens controller ensures optimised light distribution.

An optional exit legend is available for all versions transforming Geneva into a beautiful edge-lit exit sign with impressive uniform light distribution, which can be confidently specified for almost any prestigious project including hotels, conference centres and retail shopping centres.

Available as 3 hour emergency non-maintained or maintained options, Geneva can also be specified as a slave luminaire for use on central battery and static inverter systems.

Geneva finished in white

Geneva LED Exit finished in white Viewing distance 32 metres

Emergency Luminaires Cat No. Mode/Lamp GN/LED/M3 M3 LED Luminaire GN8/NM3 NM3 8W 300mm GN8/M3 M3 8W 300mm

Lumens* - 120 120

Kg 1.00 1.20 1.50

Slave Luminaires Cat No. GN8/#/D GN/LED/#/D NEW

Lumens* 275 275

Kg 1.20 1.20

Mode/Lamp Slave 8W Luminaire Slave LED Luminaire

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 360mm x Width 90mm. Requires minimum ceiling void of 80mm Exit Version Dimensions: Length 360mm x Width 90mm x Depth 160mm Cut out dimensions: 325mm x 80mm

For all Legend details See Page 65

visit: www.orbik.co.uk

Chrome

Brass

Silver-grey

Options Suffix: /BR Brass Finish /CH Chrome Finish /SG Silver Grey Finish /EX Edge-Lit Exit Version

IP20

23

Luminaires NEW VERSION

Holt

A rugged IP65 square luminaire A robust IP65 luminaire suitable for interior and exterior applications supplied as standard with rear besa and side conduit entries.

Captive screws secure the prismatic diffuser to the white base, with options for an alternative opal diffuser, and black base.

Holt’s all polycarbonate housing is robust enough to be used in a wide range of lighting applications and has the advantage of matching models with integral emergency control gear.

Holt with white base and clear diffuser

Holt with black base and opal diffuser

Mains Luminaires Cat No. HT16B HT28B HT211B NEW

Options Suffix: /AD /ST /BK /VR /HPF /O /PH /HF /ES

I ntelligent Addressable Luminaire Self Testing Luminaire Black Base Anti-tamper Screws Power Factor Corrected Opal diffuser Dawn/Dusk Photo Cell High Frequency Ballast Electronic Start

Lamp 16W 2D 28W 2D 2x11W TC-S

Emergency Luminaires Cat No. Mode/Lamp HT16B/M3 M3 16W 2D HT28B/M3 M3 28W 2D HT28B/24/3S 28W Mains + 2x4W T5 NM3 HT211B/M3 NEW M3 2x11W TC-S (one lamp M3)

Slave Luminaires Cat No. Mode/Lamp HT16B/#/D Slave 16W 2D HT28B/#/D Slave 28W 2D

Lumens - - -

Kg 1.10 2.00 2.00

Lumens* 200 270 160 180

Kg 3.00 3.00 3.00 3.00

Lumens* 400 500

Kg 1.10 1.50

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Length 255mm x Width 255mm x Depth 90mm

IP65

24

orbik THE LIGHTING SPECIALISTS

Idro, p26.

Tough and dependable.

Luminaires NEW VERSION

Idro Idro in black with guard option

A robust and attractive circular aluminium die-cast IP65 exterior bulkhead, now with LED option.

Idro is a range of robust but versatile circular die-cast IP65 exterior bulkheads. Suitable for wall and ceiling mounted applications, Idro luminaires can be specified with an optional decorative guard, or with an effective and attractive anti-light pollution eyelid or alternatively this luminaire can be selected for use with its toughened polycarbonate opal diffuser alone.

Supplied with vandal resistant screws as standard, Idro is available in black (as standard) or silver-grey, and can be used as a mains or 3 hour integral emergency non-maintained and maintained luminaire.

Other options available to Idro are as a slave luminaire for use with central battery or static inverter systems, with self-test or addressable emergency lighting gear.

An optional Microwave Presence Detector integrally mounted allows presence detection and switching utilising lux level sensing including a timedelay function.

Idro in silver-grey

Mains Luminaires Cat No. IDR26A NEW IDR28B IDR38B IDR211B NEW IDR/LED/230A NEW

Idro size A, in black with eyelid option

Options Suffix: /SG /EY /GU /HPF /HF /ES /AD /ST /MD

Silver-Grey Finish Eyelid Version Guard Power Factor Corrected High Frequency Ballast Electronic Start Intelligent Addressable Luminaire Self Testing Luminaire Microwave prescence detector (size B only)

Lamp 26W TCD Size A TC-D 1x28W 2D Size B 1x38W 2D Size B 2x11W TC-S Size B LED Size B

Lumens - - - - -

Kg 6.0 6.0 6.0 7.0 6.0

Emergency Luminaires Cat No. Mode/Lamp IDR28B/M3 M3 28W 2D Size B IDR38B/M3 M3 38W 2D Size B IDR211B/M3 NEW M3 2 x 11W TC-S (1 lamp M3) IDR/LED/M3 NEW M3 LED Size B

Lumens* 270 625 390 -

Kg 7.0 7.0 7.0 6.3

Slave Luminaires Cat No. IDR26B/#D NEW IDR28B/#/D IDR38B/#/D IDR/LED/#/D NEW

Lumens* 450 500 500 -

Kg 6.0 6.0 6.0 6.0

Mode/Lamp Slave 26W TC-D AC/DC Size B Slave 28W 2D AC/DC Size B Slave 38W 2D AC/DC Size B Slave LED Size B

* Emergency Lumens Replace # with AC/DC system Voltage 24, 50, 110 or 230 Volts. LED Slave fittings are suitable for 110V and 220V AC/DC systems. * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Size A: 260mm Ă˜ x 115mm Depth With Optional Guard/Eyelid Depth 155mm Size B: 360mm Ă˜ x 130mm Depth

IP65

26

orbik THE LIGHTING SPECIALISTS

NEW PRODUCT Luminaires

Iona

A robust and attractive square aluminium diecast IP65 exterior bulkhead.

Iona is an impressive range of stylish but robust IP65 square die-cast exterior bulkheads.

Suitable for wall and ceiling mounted applications. Iona luminaires are available as standard in black with a toughend polycarbonate opal diffuser secured by vandal resistant screws.

Iona in black with guard option

Iona’s optional decorative guards/eyelids create a versatile range of architectural luminaires which are available as a mains or 3 hour self contained emergency luminaire.

Other options available to Iona are as a slave luminaire for use with central battery or static inverter systems, with self-test or addressable emergency lighting gear.

An optional Microwave Presence Detector integrally mounted allows presence detection and switching utilising lux level sensing including a time-delay function.

Iona in silver-grey

Mains Luminaires Cat No. ION28 ION38 ION211 ION/LED/230A

Lamp 1x28W 2D 1x38W 2D 2x11W TC-S LED

Lumens - - - -

Kg 6.0 6.0 6.0 6.0

Emergency Luminaires Cat No. Mode/Lamp ION28/M3 M3 28W 2D ION38/M3 M3 38W 2D ION211/M3 M3 2 x 11W TC-S 1 lamp M3 ION/LED/M3 M3 LED

Lumens* 270 625 390 -

Kg 7.0 7.0 7.0 6.0

Slave Luminaires Cat No. ION28/#/D ION38/#/D ION/LED/#/D

Lumens* 500 500 -

Kg 6.5 6.5 6.5

Mode/Lamp Slave 28W 2D AC/DC Slave 38W 2D AC/DC Slave LED

* Emergency Lumens Replace # with AC/DC system Voltage 24, 50, 110 or 230 Volts. LED Slave fittings are suitable for 110V and 220V AC/DC systems. * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: 360mm x 360mm x 125mm

Iona in black with eyelid option

Options Suffix: /SG /EY /GU /HPF /HF /ES /AD /ST /MD

Silver-Grey Finish Eyelid Version Guard Power Factor Corrected High Frequency Ballast Electronic Start Intelligent Addressable Luminaire Self Testing Luminaire Microwave Prescence Detector

IP65 visit: www.orbik.co.uk

27

Olten, p50.

The industry standard.

NEW PRODUCT Luminaires

Jaro

Jaro is a compact and robust range of external IP65 vandal-resistant wall-pack luminaires.

Supplied as standard with a black polycarbonate base and clear prismatic diffuser, its design offers maximum efficiency whilst reducing wasted light-pollution.

The Jaro can be supplied as a mains luminaire using either single18W TC-D or 42 TC-T compact fluorescent lamps, with a 70W HQI version for higher outputs and improved lamplife of approximately 12,000 hours.

The Jaro can be supplied as a 3 hour selfcontained emergency luminaire with integral control gear using the 18W TC-D lamp version, which ensures the lamp operates for 3 hours on mains failure.

Mains Luminaires Cat No. JA18 JA42 JA70

Lamp 1x18W TC-D 1x42W TC-T 1x70W HQI

Lumens - - -

Kg 2.40 2.40 2.60

Emergency Luminaires Cat No. Mode/Lamp JA18/M3 M3 18W TC-D

Lumens* 290

Kg 3.60

Slave Luminaires Cat No. JA18/#D JA42/#D

Lumens* 390 390

Kg 2.40 2.40

Mode/Lamp Slave 18W TC-D AC/DC Slave 42W TC-T AC/DC

Replace # with AC/DC system voltage 24, 50, 110 or 230 Volts Dimensions: 295mm x 265mm x 185mm

Options Suffix: /PH Dawn/Dusk Photo Cell /HF High Frequency

IP65 visit: www.orbik.co.uk

29

Kolour concepts.

Kandel with white reflective trim

Blue Backlight

Green Backlight

Red Backlight

NEW VERSION Luminaires

Kandel

Circular surface or semi-recessed IP54 luminaire An attractive range of circular IP54 white polycarbonate luminaires, Kandel can be specified as a mains or emergency luminaire with integral emergency gear, using either 2D or TC-S compact fluorescent lamps. Kandel is now available as an energy saving, maintenance free, LED luminaire utilising the latest LED technology. This allows this stylish luminaire to be confidently specified for most applications.

Kandel can be surface mounted or semi-recessed using an attractive range of high quality surface trims are available in white, brass or chrome which transform Kandel into a stylish range of mains and emergency luminaires.

Kandel recessed

The optional choice of opal, green, red or blue halo effects for Kandel luminaires allows them to be confidently specified for several applications where a certain colour theme is required such as hotels, hospitals, restaurants etc.

This is particularly effective when combined with the new wide angled reflecting trim.

Installation and maintenance is simplified due to the design of the twist-and-lock diffuser, which is supplied in opal as standard with an alternative clear diffuser available.

Mains Luminaires Cat No. KN16 KN28 KN38 KN211 NEW KN/LED/230A NEW

Kandel white trim

Lamp 16W 2D 28W 2D 38W 2D 2 x 11W TC-S LED

Lumens - - - - -

Kg 0.50 0.50 0.50 0.50 0.50 Options Suffix:

Emergency Luminaires Cat No. Mode/Lamp Lumens* KN16/NM3 NM3 16W 2D 160 KN16/M3 M3 16W 2D 160 KN28/NM3 NM3 28W 2D 280 KN28/M3 M3 28W 2D 280 KN28/24/3S Mains 28W + NM3 2x4W 150mm 160 KN211/M3 NEW 2 x 11W TC-S One lamp in M3 180 KN/LED/M3 NEW M3 LED - Slave Luminaires Cat No. KN16/#/D KN28/#/D KN38/#/D

Mode/Lamp Slave 16W 2D Slave 28W 2D Slave 38W 2D

Kg 2.90 3.00 3.00 3.00 2.70 2.30 2.70

Lumens* 420 650 650

Kg 2.30 2.30 2.30

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions reflective trim: Ø 520mm x Depth 85mm Dimensions: Ø 360mm x Depth 85mm Cut out dimensions: Ø 335mm x 50mm Minimum Ceiling Void

IP54

visit: www.orbik.co.uk

/AD /ES /R /CD /HF /HPF /ST

Intelligent Addressable Luminaire Electronic Start Recessing Kit Clear Diffuser High Frequency Power Factor Correction Self Testing Luminaires

Surface Trims Options Suffix: KN/BR Brass Surface Trim KN/CH Chrome Surface Trim KN/WH White Surface Trim

Reflecting Trims Options Suffix: KRT/BR Brass Reflecting Trim KRT/CH Chrome Reflecting Trim KRT/WH White Reflecting Trim

Back Light Effect Options /BU Blue Halo Effect /GN Green Halo Effect /RD Red Halo Effect /OP Opal Halo Effect

31

Luminaires

Kalix

Superbly designed wall light suitable for hotels and commercial buildings Kalix is an impressive and sleek range of elegantly profiled fluorescent luminaires which utilises the latest energy saving high performance 14W T5 lamps.

Manufactured from sheet steel, Kalix is available in white as standard and can also be supplied in silver-grey with a choice of 2 diffusing fascias to accommodate the ambience of their installation.

This unobtrusive but robust high quality high frequency luminaire provides an impressive soft diffused illuminance and its minimalistic low profile design creates a superb wall or ceiling mounted luminaire.

Available in single and twin 14W high-frequency mains versions, Kalix offers the option of integral 3 hour BSI approved emergency control gear which on mains failure ensures reliable emergency back up, achieving a Ballast Lumens Factor (BLF) of 32%.

The Kalix range of Luminaires are suitable as Slave Luminaires for use with central battery or static inverter systems and can be specified for use with self test or intelligent addressable emergency gear.

Kalix in silver-grey Style B

Kalix in white Style A

Mains Luminaires Cat No. KAL14 KAL2X14

Options Suffix: /A /B /AD /ST /SG

Kalix Style A Kalix Style B Intelligent Addressable Luminaire* Self Testing Luminaire* Silver Grey

* One lamp only

Lamp 14W T5 HF 2X14W T5 HF

Lumens - -

Kg 2.60kg 2.70Kg

Emergency Luminaires Cat No. Mode/Lamp KAL14/M3 M3 14W T5 Emergency KAL214/M3 M3 2x14W Emergency

Lumens* 384 384

Kg 3.50Kg 3.60Kg

Slave Luminaires Cat No. KAL14/#/D

Lumens* 500

Kg 2.60Kg

Mode/Lamp Slave 14W T5 AC/DC

* Emergency Lumens Replace # with AC/DC system voltage 24, 50, 110 or 230 Volts * For other durations, specify the required time period e.g. /M3 but for 1 hour duration becomes /M1 Dimensions: Length 585mm x Width 200mm x Depth 42mm

IP20

32

orbik THE LIGHTING SPECIALISTS

Luminaires

Karis

Stylish and contemporary luminaire ideal for prestigious applications The Karis range of luminaires offer an elegant appearance with a host of options which creates flexibility suitable for most commercial applications.

Karis is a decorative but robust high quality luminaire using energy saving compact fluorescent lamps. Its steel base is supplied in white as standard with silver-grey as an option, with an elegant polycarbonate diffuser designed to evenly diffuse its luminance.

Supplied as a mains and integral emergency luminaire, Karis offers single and twin lamp versions as standard in mains mode with 1 lamp being used for emergency versions.

This stylish luminaire is suitable for ceiling or wall mounted applications and its facility to include an optional wire suspension kit enables this range of luminaires to be confidently specified for virtually all projects where matching mains and emergency luminaires are required.

Karis can be supplied as a slave luminaire for use with central battery systems or static inverters and can be supplied with self-test emergency and intelligent addressable emergency systems

Karis finished in white

Mains Luminaires Cat No. KAR18 KAR2X18 KAR26 KAR2X26

Lamp 1 X 18W TC-D 2 X 18W TC-D 1 X 26W TC-D 2 x 26w TC-D

Lumens - - - -

Kg 1.90Kg 1.90Kg 1.90Kg 1.90Kg

Emergency Luminaires Cat No. Mode/Lamp KAR18/M3 M3 1 X 18W TC-D KAR2X18/M3 M3 2 X 18W TC-D KAR26/M3 M3 1 X 26W TC-D KAR2X26/M3 M3 2 x 26w TC-D

Lumens* 276 276 324 324

Kg 2.70Kg 2.80Kg 2.70Kg 2.80Kg

Slave Luminaires Cat No. KAR18/#D KAR2X18/#D KAR26/#D KAR2X26/#D

Lumens* 420 420 540 540

Kg 1.90Kg 1.90Kg 1.90Kg 1.90Kg

Mode/Lamp Slave 1 X 18W TC-D Slave 2 X 18W TC-D Slave 1 X 26W TC-D Slave 2 x 26w TC-D

* Emergency Lumens Replace # with AC/DC system Voltage 24, 50 , 110 or 230v Volts * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Length 345mm x Width 345mm x Depth 100mm

Options Suffix: /SG /HPF /HF /AD /ST

Silver Grey Power Factor Corrected High Frequency Ballast Intelligent Addressable Luminaire * Self Testing Luminaire *

*Not available in twin versions

IP20 visit: www.orbik.co.uk

33

Luminaires

Kea

A stylish exit sign or wall luminaire for prestigious interior applications Kea stylish appearance coupled with it’s distinctive symmetrical design makes it ideal for the most prestigious applications.

Suitable as an exit sign or a high frequency mains/emergency luminaire, Kea is available in white as standard with an attractive silver grey finish as an option.

Kea finished in white

Kea finished in white with exit legend Viewing distance 30 metres

Mains Luminaires Cat No. KE14 KE36

Options Suffix: /AD Intelligent Addressable Luminaire /EX Exit Fascia /ST Self Testing Luminaire /SG Silver Grey Finish

Lumens - -

Kg 3.20 3.30

Emergency Luminaires Cat No. Mode/Lamp KE14/M3 M3 14W T5 Emergency KE36/M3 M3 36W TC-L Emergency

Lumens* 384 435

Kg 4.20 4.20

Slave Luminaires Cat No. KE14/#D KE36/#D

Lumens* 384 435

Kg 3.20 3.30

Mode/Lamp Slave 14W T5 Slave 36W TC-L

* Emergency Lumens Replace # with AC/DC 24, 50, 110 or 230 system Voltage * For other durations, specify the required time period e.g. /M3 but for 1 hour duration becomes /M1 Dimensions: 610mm Length x 200mm Width x 105mm Depth

IP20

34

Lamp 14W T5 HF 36W TC-L HF

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

Luminaires

Lavaine

Classically styled decorative luminaire for energy saving lamps The Lavaine range of luminaires feature a classic styling consisting of a steel gallery finished in either brass or chrome polished plate and an opal glass diffuser. The diffuser is held in place by three knurled screws finished to match the gallery.

Lavaine features mains, emergency and slave luminaires available in two body sizes.

This elegant luminaire is a popular choice for many applications where a prestigious, reliable range of matching mains and emergency luminaires are required.

Lavaine with chrome finish

Lavaine with brass finish

Mains Luminaires Cat No. LV16B LV28B LV38B LV28C LV38C

Lamp 16W 2D Size B 28W 2D Size B 38W 2D Size B 28W 2D Size C 38W 2D Size C

Lumens - - - - -

Kg 2.00 4.00 4.00 4.60 4.60

Emergency Luminaires Cat No. Mode/Lamp LV16/M3 M3 16W 2D Size B LV28/M3 M3 28W 2D Size C

Lumens* 200 280

Kg 3.00 4.80

Slave Luminaires Cat No. LV16/#/D LV28/#/D LV38/#/D

Lumens* 400 500 500

Kg 1.80 3.80 3.80

Mode/Lamp Slave 16W 2D AC/DC Size B Slave 28W 2D AC/DC Size C Slave 38W 2D AC/DC Size C

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions Size B: Ă˜ 360mm x depth 140mm Dimensions Size C: Ă˜ 390mm x depth 180mm

Options Suffix: /AD Intelligent Addressable Luminaire /BR Brass Finish /CH Chrome Finish /ES Electronic Start /HF High Frequency Ballast /HPF Power Factor Corrected /ST Self Testing Luminaire

IP20 visit: www.orbik.co.uk

35

Luminaires NEW VERSION

Larino

Elegant circular lighting range Designed for universal application within any lighting project, the Larino range of luminaires are available in three diameters: 330mm, 430mm and 525mm.

Larino luminaires feature a spun metal base containing the control gear and energy saving compact fluorescent lamps. Models can be either mains only operation or, in selected versions, incorporate integral emergency gear.

Larino’s base is available in a range of epoxy coated and plated finishes and can be supplied with a smooth, polished opal or clear prismatic diffuser.

Larino is available as standard with a white base and opal diffuser.

Larino finished in brass

Larino finished in chrome

Options Suffix: /BR /CH /PR /HPF /HF /ES /AD /ST

Brass Finish Chrome Finish Prismatic Diffuser Power Factor Corrected High Frequency Ballast Electronic Start Intelligent Addressable Luminaire Self Testing Luminaire

Mains Luminaires Cat No. LAR16 LAR28 LAR38 LAR40 NEW LAR226HF LAR55 LAR55T5C NEW

Lamp 16W 2D Size A 28W 2D Size B 38W 2D Size B 40W T5c Circular Size B 2x26W Size C TC-D 55W Size C 2D 55W T5c Circular

Lumens - - - - - - -

Kg 1.10 2.10 2.10 2.10 2.60 2.60 2.60

Emergency Luminaires Cat No. Mode/Lamp LAR16/M3 M3 16W 2D Size A LAR28/M3 M3 28W 2D Size B LAR38/M3 M3 38W 2D Size B LAR40/M3 NEW M3 40W T5c Circular Size B LAR226/M3 M3 2x26W TC-D Size C LAR55/M3 M3 55W 2D Size C LAR55T5C/M3 NEW M3 55W T5c Circular Size C

Lumens* 200 270 625 370 324 450 530

Kg 2.70 3.00 3.00 3.00 3.70 3.70 3.70

Slave Luminaires Cat No. LAR16/#/D LAR28/#/D LAR38/#/D LAR40/#D NEW

Lumens* 400 500 500 990

Kg 1.00 2.00 2.00 2.00

Mode/Lamp Slave 16W 2D Size A Slave 28W 2D Size B Slave 38W 2D Size B Slave 40W T5c Size B

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions Size A: Ø 330mm x 105mm Dimensions Size B: Ø 430mm x 105mm Dimensions Size C: Ø 525mm x 105mm

IP20

36

orbik THE LIGHTING SPECIALISTS

Simply elegant.

Luminaires

Lens

Contemporary circular luminaire with a halo effect back light creating a touch of style to interior applications Lens is a stylish range of circular polycarbonate luminaires available in mains and integral emergency versions.

Lens with white straight trim

Supplied as standard with an opal base, white straight sided clip-on metal trim and an opal diffuser. Lens luminaires offer a comprehensive range of options including a prismatic diffuser, with alternative clip-on trims which can be specified as curved or straight sided in white, brass, chrome or black chrome.

The optional choice of blue, green or red halo effects allows you to specify this luminaire to meet your exact requirements where a specific colour theme is required, enhancing any installation.

Lens is now available with a stylish broad deluxe trim in all colour options.

Lens with brass curved trim

Mains Luminaires Cat No. LN28 LN38

Lamp 28W 2D 38W 2D

Lumens - -

Kg 2.70 2.70

Emergency Luminaires Cat No. Mode/Lamp LN28/M3 M3 28W 2D Emergency LN38/M3 M3 38W 2D Emergency

Lumens* 384 625

Kg 3.60 3.60

Slave Luminaires Cat No. LN28/#D LN38/#D

Lumens* 500 500

Kg 2.60 2.60

Mode/Lamp Slave 28W 2D Slave 38W 2D

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Curved Trim Version Dimensions: Ø 500mm x Depth 105mm Straight Sided Trim Version Dimensions: Ø 490mm x Depth 105mm Broad Deluxe Trim Version Dimensions: Ø 525mm x Depth 105mm

IP20

38

orbik THE LIGHTING SPECIALISTS

Luminaires

Lens with black chrome broad deluxe trim

Opal Backlight

Blue Backlight

Green Backlight

Lens with chrome broad deluxe trim

Red Backlight

Metal Trim & Colour Finish Options (white straight sided trim standard) /S/BR Brass Finish Straight Sided Metal Trim /S/CH Chrome Finish Straight Sided Metal Trim /S/GM Black Chrome Finish Straight Sided Metal Trim /C/WH White Finish Curved Metal Trim /C/BR Brass Finish Curved Metal Trim /C/CH Chrome Finish Curved Metal Trim /C/GM Black Chrome Finish Curved Metal Trim /BD/WH White Finish Broad Deluxe Metal Trim /BD/BR Brass Finish Broad Deluxe Metal Trim /BD/CH Chrome Finish Broad Deluxe Metal Trim /BD/GM Black Chrome Broad Deluxe Sided Metal Trim Back Light Effect Options (opal halo effect back light standard) /BU Blue Halo Effect Back Light /GN Green Halo Effect Back Light* /RD Red Halo Effect Back Light* * Green and red back light effect luminaires are manufactured to order.

Options Suffix /AD Intelligent Addressable Luminaire /ES Electronic Start /HF High Frequency Ballast /HPF Power Factor Correction /ST Self-Test Luminaire

visit: www.orbik.co.uk

39

Luminaires NEW PRODUCT

Leah

Leah is an attractive circular IP65 robust polycarbonate luminaire available for wall or ceiling mounting.

Leah offers a choice of 2D, T5c and TC-S energy-saving lamps for mains lighting with optional integral 3 hour emergency versions including slave.

Supplied as standard with a hinged geartray, white base and opal diffuser, this high quality elegant luminaire provides a reliable and effective solution for most indoor and outdoor applications.

Optional elegant trims are available which create an impressive diffused halo-effect enabling this stylish range of luminaires to be considered for luxurious or challenging applications including hotels, universities, shower areas and stairwells.

Alternatively, the Leah can be used as a semi-recessed luminaire when using the narrower version of the two attractive trims.

Leah with large white trim

Leah is suitable for self-test emergency lighting and can be supplied with emergency gear for intelligent addressable systems.

Leah with narrow white trim

Leah without trim

Options Suffix: /ST /AD /HF /NT /WT /OP

40

Self Testing Luminaire Intelligent Addressable luminaire High Frequency Narrow Trim Wide Trim Opal Halo Base

Mains Luminaires Cat No. LE28 LE38 LE40 LE211

Lamp 28W 2D 38W 2D 40W T5c Circular 2 x 11W TCS

Lumens - - - -

Kg 2.70 2.70 2.70 2.70

Emergency Luminaires Cat No. Mode/Lamp LE28/M3 M3 28W 2D LE38/M3 M3 38W 2D LE40/M3 M3 40W T5c Circular LE211/M3 2 x 11W TC-S (One lamp in M3)

Lumens* 384 625 370 390

Kg 3.60 3.60 3.60 3.60

Slave Luminaires Cat No. LE28/#D LE38/#D LE40/#D LE211/#D

Lumens* 500 500 990 380

Kg 2.60 2.60 2.60 2.60

Mode/Lamp Slave 28W 2D Slave 38W 2D Slave 40W T5c Circular Slave 2 x 11W TCS

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration No Trim Version Dimensions: Ø 395mm x 120mm Narrow Trim Version Dimensions: Ø 440mm x 120mm Broad Trim Version Dimensions: Ø 520mm x 120mm Recess Cut out: Ø 357mm

orbik THE LIGHTING SPECIALISTS

Universally aesthetic.

Luminaires NEW VERSION

Mezzina

IP65 circular polycarbonate utility luminaire for interior and exterior use Mezzina is available as a mains and emergency bulkhead luminaire designed specifically for either energy efficient compact fluorescent lamps or now with the option of using LED’S which offer a 50,000 lamp life with low maintenence costs, to provide designers and installers with maximum flexibility.

Mezzina is sealed to IP65 and has a screw fit diffuser sealed to the body with a closed cell neoprene gasket for durability. Mezzina’s pleasing appearance lends it to both exterior and interior applications.

The control gear is mounted on a removable steel gear tray and the all polycarbonate white housing has drill starts for both centre rear Besa entry or 20mm surface conduit entries. Three surface conduit entries are provided. It comes as standard with a clear diffuser and Techno Radial lens technology.

An opal diffuser and a black base can be supplied as options and an attractive recessing trim available in white finish, enables Mezzina to be confidently specified in a wide range of applications.

Mezzina with white base Mezzina with white recessing trim

Mains Luminaires Cat No. MZ16 MZ28 MZ38/HF MZ211 NEW MZ/LED NEW

Mezzina with black base

Options Suffix: /MZR/W White Recessing Trim /BK Black Base /O Opal Diffuser /VR Anti-tamper Screws /HPF Power Factor Corrected /PH Dawn/Dusk Photo cell /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire

Lamp 16W 2D 28W 2D 38W HF 2D 2 x 11W TC-S LED

Lumens - - - - -

Kg 1.10 1.10 1.10 1.10 1.10

Emergency Luminaires Cat No. Mode/Lamp MZ16/M3 M3 16W 2D Emergency MZ28/M3 M3 28W 2D Emergency MZ211/M3 NEW M3 2 x 11W (one lamp M3) MZ/LED/M3 NEW M3 LED Emergency

Lumens* 200 270 180 -

Kg 2.70 3.00 2.80 2.70

Slave Luminaires Cat No. MZ16/#/D MZ28/#/D

Lumens* 400 500

Kg 1.10 1.10

Mode/Lamp Slave 16W 2D Luminaire Slave 28W 2D Luminaire

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Ø 290mm x 79mm Dimensions (Below Ceiling) With Recess Trim: 345mm x 50mm Cut out dimensions: Ø 295mm

IP65

42

orbik THE LIGHTING SPECIALISTS

NEW VERSION Luminaires

Monza

A range of miniature compact fluorescent downlights with HF gear.

A stylish range of affordable high quality recessed downlighters; the Monza range has been specifically designed to accommodate energy saving compact fluorescent lamps as mains luminaires.

Available as 18W or 26W TC-DE lamps (lamps not included), the Monza downlighter range offers a 3 hour emergency version for both lamps.

Orbik’s BSI approved Kite Marked emergency control gear and Nickel Cadmium battery pack are contained in a silicone coated woven glass Fibre sleeve which can be offered into the ceiling via the cut out.

During emergency discharge, the high ballast lumen factors (BLF) achieved (17% for 18W, 16% for 26W) ensure reliable emergency lighting even when low-mercury lamps are in use.

Monza with chrome trim

The Monza range is available as standard in White with brass or chrome options and has optional attachments including drop-glass which ensures the Monza’s range of recessed down lighters can be confidently specified in both mains and emergency lighting for most indoor applications.

Monza with white trim Monza with brass trim and drop glass

Mains Luminaires Cat No. MO18 MO26 NEW

Lamp 18W TC-D/E 26W TC-D/E

Emergency Luminaires Cat No. Mode/Lamp MO18/M3 M3 18W TC-D/E Downlight MO26/M3 NEW M3 26W TC-D/E Downlight

Lumens - -

Kg 0.50 0.50

Lumens* 200 290

Kg 1.30 1.40

LAMPS NOT INCLUDED * Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: 18W: Ø 130mm x Depth 175mm 26W: Ø 130mm x Depth 200mm Cut out dimensions: Ø 86mm * Add 0.1kg for IP44 and Floating Glass Options

IP20/44 visit: www.orbik.co.uk

Options Suffix: /BR Brass Trim /CH Chrome Trim /WH/DG White Trim with Drop Glass /BR/DG Brass Trim with Drop Glass /CH/DG Chrome Trim With Drop Glass /IPWH White IP44 Trim /IPBR Brass IP44 Trim /IPCH Chrome IP44 Trim /ST Self Testing Luminaire

43

Luminaires NEW VERSION

Multia

A stylish range of compact fluorescent/Metal Halide Discharge downlights Multia is a comprehensive range of downlighters offering a variety of options for almost every application.

Available from 18W to 42W in both single and twin lamp versions. Multia is supplied with a white bezel as standard with inter-changeable brass or chrome options which enables the Multia to suit most interior decor.

Single 70/150W Metal Halide versions allow this luminaire to be specified in most commercial and retail environments.

Additional optional attachments include an attractive floating glass, IP44 opal cover and a range of polycarbonate emergency drop legends which creates a complete and quality range of recessed downlight luminaires.

Emergency options, for all compact fluorescent versions, are available using a remote box which contains BSI approved Perferm™ emergency control gear, designed to operate low Mercury compact fluorescent lamps.

Multia also offers a range of mains HQI discharge downlights with integral control gear for 70W and 150W lamps.

Mains Luminaires Cat No. MU18 MU218 MU26 MU226 MU32 MU42 MU232 NEW MU242 NEW MU70 NEW MU150 NEW

Options Suffix: /AD Intelligent Addressable Luminaire /ES Electronic Start /HF High Frequency /HPF Power Factor Corrected /ST Self Testing Luminaire /L+ Drop Legend (Replace + with Required Legend Panel) /TB Turbo Louvre

Trims: MU/BR Brass trim MU/CH Chrome trim

Drop Glass: DG/WH Drop glass with White trim DG/BR Drop glass with Brass trim DG/CH Drop glass with Chrome trim

IP Cover: IP/WH IP44 White cover IP/BR IP44 Brass cover IP/CH IP44 Chrome cover

Lumens – – – – – – – – – –

Kg 2.42 3.25 2.42 3.25 2.28 2.36 3.25 3.25 2.50 2.50

Emergency Luminaires (Incorporating Perferm™ Technology) Cat No. Mode/Lamp Lumens* MU18/M3 M3 18W TC-D 276 MU218/M3 M3 2 x 18W TC-D 276 MU26/M3 M3 26W TC-D 324 MU226/M3 M3 2 x 26W TC-D 324 MU32/M3 M3 32W HF TC-T 480 MU42/M3 M3 42W HF TC-T 416 MU232/M3 NEW M3 2 x 32W TC-T 480 MU242/M3 NEW M3 2 x 42W TC-T 416

Kg 2.42 3.25 2.42 3.25 2.28 2.36 3.30 3.40

Mains/Slave Luminaires Cat No. Mode/Lamp MU218/PVR/# NEW 2 x 18W TC-D One lamp in emergency MU226/PVR/# NEW 2 x 26W TC-D One lamp in emergency MU232/PVR/# NEW 2 x 32W TC-T One lamp in emergency MU242/PVR/# NEW 2 x 42W TC-T One lamp in emergency

Kg 3.55 3.55 3.55 3.55

Lumens* 390 400 580 760

LAMPS NOT INCLUDED * Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration ^ Supplied with remote mounted metal halide control gear Dimensions: Ø 226mm x 198mm (Minimum Ceiling Void) Cut-Out (All Versions): Ø 208mm * This weight does not include remote gear box, add 2.1kg

IP20/44

44

Lamp 18W TC-D 2 x 18W TC-D 26W TC-D 2 x 26W TC-D 32W HF TC-T 42W HF TC-T 2 x 32W HF TC-T 2 x 42W HF TC-T 1 x 70W HQI-TS 1 x 150W HQI-TS

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

White trim turbo lourve

The informed choice.

Chrome trim

Brass trim with legend

Chrome trim drop glass

IP44 Brass trim

Efficient and durable an unbeatable combination.

NEW PRODUCT Luminaires

Ordbey

High performance Low Bay luminaire Ordbey is an impressive range of high quality low bay luminaires designed to achieve maximum efficiency reducing the required quantities of fittings and minimising installation and maintenance costs.

Manufactured from zinc coated steel with a white epoxy finish, the Ordbey is suitable for surface mounting or suspension fixing and is ideal for most industrial and storage open areas.

Ordbey emergency luminaire

Suitable for mounting heights from 4 to 8 metres, the Ordbey can be specified for use with 250-400W SON-T or HQI discharge lamps. An optional integral emergency 3 hour version utilises an 18W TC-L compact fluorescent lamp which provides an impressive 49% ballast lumen factor (BLF) in mains failure. This self-contained emergency lowbay is designed to negate the requirement for costly additional emergency lighting luminaires.

Optional clear diffusers and wire quards are available and a safety glass cover is provided as standard with all HQI versions.

Ordbey mains luminaire

Mains Luminaires Cat No. ORD250S ORD400S ORD250H ORD400H

Lamp 250W SON-T 400W SON-T 250W HQI (with glass) * 400W HQI (with glass) *

Lumens - - - -

Kg 7.00 9.00 7.50 9.50

Emergency Luminaires Cat No. Mode/Lamp Lumens* ORD250S/C3 250W SON-T + NM3 18W TC-L 570 ORD400S/C3 400W SON-T + NM3 18W TC-L 570 ORD250H/C3 250W HQI* (with glass) + 18W TC-L 570 ORD400H/C3 400W HQI* (with glass) + 18W TC-L 570

Kg 12.50 14.50 13.00 15.00

Slave Luminaires Cat No. ORD250S/#D ORD400S/#D ORD250H/#D ORD400H/#D

Kg 12.50 14.50 13.00 15.00

Mode/Lamp Lumens* 250W SON-T + Slave 18W - 400W SON-T + Slave 18W - 250W HQI (with glass) + Slave 18W * - 400W HQI (with glass) + Slave 18W * -

# Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * Not suitable for use with lamps with integral ignitors Dimensions: Emergency: Length 880mm x Width 304mm x Depth 210mm

Mains: Length 560mm x Width 304mm x Depth 210mm

visit: www.orbik.co.uk

Options Suffix: /DD Dished Clear Diffuser /GL Safety Glass Cover /WG Wire guard /AD Intelligent Addressable Luminaire /ST Self Test Luminaire /TM14 Using the 18W lamp to provide light for 14 min during re-strike

47

Luminaires VERSION

Odet

Emergency floodlighting unit Odet emergency floodlights incorporate a British Standard Approved Constant Voltage Charger. The chargers are fitted with thermal, current and short circuit protection devices.

A low voltage disconnect circuit to prevent the batteries entering a deep discharge state in the event of prolonged power failure, maximising battery life.

Batteries are maintenance free, sealed lead acid types with a life expectancy of five years under normal conditions. The robust but stylish sheet steel enclosure is finished in a light grey epoxy coating.

Odet is also available with an IP65 polycarbonate enclosure, for external requirements. We have extended the range to include a 2x55W NM3 version.

Odet is available as a deluxe version utilising 20 Watt and 50 Watt dichroic halogen lamps (not supplied). The various beam angles enable the client to tailor the light distribution to their specific requirements. The heads enable the lamps to be adjusted both horizontally and vertically giving total flexibility. Available as standard in white finish, this stylish emergency luminaire is a popular choice for shopping malls and most interior applications.

An optional 14 minute timer enables Odet to continue to operate in the emergency mode after the main supply has been reinstated allowing discharge luminaires to re-ignite and provide a suitable light output.

ODS 20/NM1/TH

Odet IP65

ODS Deluxe

ODS 55/NM3/TH Options Suffix: /AD Intelligent Addressable Luminaire (not available in deluxe version) /ST Self Testing Luminaire (not available in deluxe version) /IP65 Weatherproof Enclosure /TM14 14 Minute Timer Delay Unit for use with Discharge Lamp Schemes

48

Emergency Luminaires Cat No. ODS20/NM1/TH ODS20/NM3/TH ODS21/NM1 ODS21/NM3 ODS55/NM1/TH ODS55/NM3/TH†ODS/DELUXE

Mode/Lamp NM1 2x20W/TH NM3 2x20W/TH NM1 2x21W NM3 2x21W NM1 2x55W TH NM3 2x55W TH 20/50W* Dichroic

Lumens 2x 340 2x 340 2x 280 2x 280 2x 900 2x 900 -

Kg 5.88 7.00 5.88 7.00 7.50 16.00 7.00

Slave Luminaires Cat No. ODS20/#D NEW ODS21/#D NEW ODS55/#D NEW ODS/DELUXE/#D NEW

Mode/Lamp Slave 2 x20W Slave 2 x 21W Slave 2 x 55W Slave 20/50W *

Lumens 2x 340 2x 280 2x 900 -

Kg 3.00 3.00 3.00 3.20

* Deluxe versions give 3 hours emergency duration when used with 20W lamps and a 1 hour emergency duration when used with 50W lamps (lamps not supplied) * Odet Slaves are suitable for 110V and 220V AC/DC supplies * Emergency Lumens †This product is supplied with the batteries packed separately Dimensions: 20 and 21W (NM1 & NM3) 55W (NM1) Length 315mm x Height 310mm x Depth 110mm 55W NM3 Length 440mm x Height 315mm x Depth 110mm Dimensions IP65 Version: Length 400mm x Height 400mm x Depth 135mm Dimensions Deluxe Version: Length 315mm x Height 200mm x Depth 75mm

IP20/65 orbik THE LIGHTING SPECIALISTS

Luminaires

Orbe

Compact fluorescent low bay The Orbe lobay is a robust, high quality luminaire utilising energy saving compact fluorescent lamps.

Supplied as standard with a choice of 4 x 55w TC-L or 4 x 80w TC-L compact fluorescent lamps, instant high-efficiency lighting with high-output integral 3 hour emergency lighting using 1 lamp enables the Orbe to be specified for applications which traditional high-pressure discharge lobays do not have a solution.

Orbe is suitable for surface mounting or suspension and is supplied with 4 fixing points and 3 BESA box entries as standard.

Orbe’s high quality and intelligently designed reflector system provides precise and controlled optical performance resulting in impressive and superior spacing data (see photometric data), ideal for high mounting applications such as sports halls, warehouses, factories.

Independent switching circuits enable the Orbe luminaire the option of switching off 2 lamps when in mains operation enabling potential power savings.

Optional wire guard and polycarbonate covers offer added protection typically for sports halls or where damage may occur to the luminaire.

Orbe can be used as a Slave Luminaire operating from a central battery system or static inverter, and can be specified with self test emergency and intelligent addressable emergency lighting.

Mains Luminaires Cat No. OR455 OR480

Lamp 4X55W TC-L 4X80W TC-L

Lumens - -

Kg 11.50 11.50

Emergency Luminaires Cat No. Mode/Lamp OR455/M3 M3 4 X 55W TC-L OR480/M3 M3 4 X 80W TC-L

Lumens* 1034 1020

Kg 17.00 17.00

Slave Luminaires Cat No. OR455/#/D OR480/#/D

Lumens* 1034 1020

Kg 11.50 11.50

Mode/Lamp Slave 55W TC-L Slave 80W TC-L

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Length 900 x Width 605 x Depth 100mm

Options Suffix: /WG Wire Guard /CP Clear Polycarbonate Diffuser /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire

IP20 visit: www.orbik.co.uk

49

Luminaires NEW PRODUCT

Olten

High Bay with Prismatic Refractor Olten is a comprehensive range of stylish High Bay luminaire designed to accomodate most commercial interiors including retail stores, car show rooms, reception areas and university buildings.

Available in two sizes, 420mm or 570mm, the Olten can be surface mounted or suspended, and consists of compact fluorescent and HQI discharge versions. It is also supplied with integral mains gear and a high-performance polycarbonate refractor as standard (additional light diffusion can be provided with the optional lens cover).

Optional integral emergency versions are available with the 42W or 57W lamps enabling the Olten to be considered for most prestigious installations where seperate emergency luminaires are not acceptable.

Olten 420mm Mains Luminaires Cat No. OLT242A OLT57A OLT70A OLT85A OLT150A OLT120B OLT250B OLT400B

Olten 570mm

Options Suffix: /LCA Lens cover A size /LCB Lens cover B size /SK Suspension kit

Lamp 2 x 42W TC-T 57W TC-T 70W HQ-I 85W PL-H 150W HQ-I 120W PL-H 250W HQ-I 400W HQ-I

Lumens - - - - - - - -

Kg 4.00 4.00 4.50 4.50 8.00 8.00 9.20 10.80

Emergency Luminaires Cat No. Mode/Lamp OLT242A/M3 M3 2 x 42W TC-T (one lamp in emergency) OLT57A/M3 M3 57W TC-T

Lumens* 580 560

Kg 5.80 5.90

Slave Luminaires Cat No. OLT242A/PVR/# OLT57A/PVR/#

Lumens* 770 860

Kg 4.00 4.00

Mode/Lamp Slave 2 x 42W TCT-T (one lamp in emergency) Slave 57W TC-T

# Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * Not suitable for use with lamps with integral ignitors Dimensions: Mains A size: 410 Ø x 470mm Mains B size: 570 Ø x 570mm

Emergency A size: 410 Ø x 550mm

IP20

50

orbik THE LIGHTING SPECIALISTS

NEW VERSION Luminaires

Napoli­­­

Slim profile injection moulded polycarbonate exit sign Napoli exit signs lead the market in aesthetic design, ease of installation and maintenance.

The use of an injection moulded body has enabled us to create an exit sign superior in style to conventional versions but remains equally as competitively priced.

Napoli’s body and base is made from flame retardant polycarbonate, features a threshold downlight and a screen-printed legend panel. Utilising clip fixings the Napoli is probably the quickest exit sign to install. IP44 protection makes Napoli suitable for use in sheltered exterior locations

Viewing distance 40 metres

Emergency Luminaires Cat No. Mode/Lamp NA8/NM3/E NM3 8W 300mm NA8/M3/E M3 8W 300mm NA8/NM3 NM3 8W 300mm NA8/M3 M3 8W 300mm

Lumens* 80 80 120 120

Kg 2.30 2.60 2.30 2.60

Slave Luminaires Cat No. NA8/#/D

Lumens* 275

Kg 2.30

Mode/Lamp Slave 8W 300mm

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: 420 mm x 221mm x 58mm

Options Suffix: /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire

For all Legend details See Page 65

visit: www.orbik.co.uk

51

Luminaires

Pescara

Fluorescent exit sign for internal and external use The Pescara range of fluorescent single and double sided exit signs are manufactured from sheet steel and finished in a choice of either white, black, brass or chrome. Pescara’s many features include a hinged internal steel gear tray, rear centre Besa entry, keyhole mounting slots and an opal threshold downlight panel to illuminate the area below the sign.

The double sided version of Pescara has a central top Besa entry for ease of fixing. The double-sided sign is no deeper than the standard Pescara exit sign and so co-ordinates with other Pescara models.

A special U shaped gear tray allows even illumination of both legend panels and an opal downlight panel ensures that illumination is also directed below the sign to the escape route and the door threshold.

The Cinema version of Pescara exit sign is fitted with a fret-cut legend panel to reduce light emission. They are designed for use in Theatres, Cinemas, School Halls and Discotheques.

The IP65 rated Pescara is of robust construction making it suitable for external and internal use. It is suitable for car parks, sports stadiums, livestock markets and many other applications.

Viewing distance 40 metres

Non-maintained, maintained and sustained (combined) models are BSI approved to EN60598, and all models are CE and F marked.

The legend panel can be removed from either end of the sign via removable endcaps making Pescara suitable for close fitting into corners where necessary.

IP65 Pescara

Mains Luminaires Cat No. PES8 PED8

Lamp 8W 300mm Single Sided 8W 300mm Double Sided

Lumens - -

Kg 2.60 2.60

Lumens* 120

Kg 2.75

M3 8W 300mm Single Sided

120

3.00

C3 8W 300mm Single Sided

120

3.00

PED8/NM3 PED8/M3

NM3 8W 300mm Double Sided M3 8W 300mm Double Sided

120 120

2.75 3.00

Slave Luminaires Cat No. PES8/#/D PED8/#/D

Mode/Lamp Lumens* Slave 8W Exit Sign Single Sided 275 Slave 8W Exit Sign Double Sided 275

Emergency Luminaires Cat No. Mode/Lamp PES8/NM3 NM3 8W 300mm Single Sided PES8/M3 Pescara with fret cut legend

Options Suffix: /C Fret Cut Legend /BK Black Finish /BR Brass Finish /CH Chrome Finish /E Economy Version /IP65 IP65 Version (Does not have a Downlight Panel) /LP Single sided signs available in low profile /VR Anti-tamper Screws /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /TS Push to Test Switch /RAB Right angled mounting bracket

52

PES8/C3

Kg 2.50 2.50

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 385mm x Width 200mm x Depth 95mm (Low Profile 65mm) Dimensions IP65 Version: Length 445mm x Width 225mm x Depth 95mm

For all Legend details See Page 65

IP20/65 KM31508

orbik THE LIGHTING SPECIALISTS

Luminaires

Pescara-G

Large exit sign with a 90 metre viewing distance To compliment our Pescara range, we have introduced a large exit sign Pescara-G for applications where greater viewing distances are required.

The Pescara-G is available in single and double sided versions and incorporate many of the features of the Pescara range.

The ’U’ channel geartray ensures even illumination in both single and double sided versions and the double downlight panel illuminates directly below the sign to the escape route and door threshold.

Available in white as standard and non-maintained and maintained emergency modes, the Pescara-G is ideal for supermarkets, car parks and warehouses.

Viewing distance 90 metres Emergency Exit Signs Cat No. Mode/Lamp PES18/NM3 NM3 18W T8 Single Sided PES18/M3 M3 18W T8 Single Sided PED18/NM3 NM3 18W T8 Double Sided PED18/M3 M3 18W T8 Double Sided

Lumens 320 320 320 320

Kg 9.30 9.40 9.30 9.40

Slave Luminaires Cat No. PES18/#D PED18/#D

Lumens* 320 320

Kg 9.30 9.30

Mode/Lamp Slave 18W T8 Single Sided Slave 18W T8 Double Sided

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 620mm x Width 455mm x Depth 155mm

For all Legend details See Page 65

visit: www.orbik.co.uk

Options Suffix: /AD Intelligent Addressable Luminaire /ES Electronic Start /HF High Frequency /HPF Power Factor Correction /ST Self Testing Luminaire

IP20

53

Luminaires NEW VERSION

Petina

Ultra-slim LED single and double-sided exit sign At only 30mm the single sided version of Petina is one of the slimmest emergency exit signs available on the market.

The Petina’s new clean square profile allows it to be considered as on of the most stylish emergency luminaires available and with new wire-suspension kits and end-mounting black brackets now available double-sided Petina can also be confidently considered for almost any internal application as wall or ceiling mounted.

Viewing distance 35 metres

Beautifully designed, this elegantly styled LED emergency luminaire utilises advanced optical design, which ensures its Light Conducting Legend receives an even spread of illumination from its LEDs with a life of approximately 50,000 hours.

Suitable for non-maintained and maintained modes, this 3 hour emergency luminaire is available in white, black, brass or chrome and can now also be supplied as a double-sided version which at 45mm is probably one of the slimmest double sided exit signs ever designed.

Petina double-sided in Silver-Grey

White

Silver-Grey

Brass

Black

Options Suffix: /WS Wire Suspension Kit /RB Right angled Mounting Bracket /ST Self Testing Luminaire /BK Black Finish /SG Silver-grey Finish /BR Brass Finish /CH Chrome Finish

54

Chrome

Emergency single-sided Luminaires Cat No. Mode/Lamp PE/M3/WH NM/M3 White LED Sign Single Sided

Kg 2.00

Emergency double-sided Luminaires Cat No. Mode/Lamp PD/M3/WH NM/M3 White LED Sign Double Sided

Kg 2.60

Slave Luminaires Cat No. PE/#D NEW PD/#D NEW

Kg 2.30 2.30

Mode/Lamp Slave White LED Sign Single Sided Slave White LED Sign Double Sided

# Suitable for 110V and 220V AC/DC Systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Single sided - Length 360mm x Width 235mm x Depth 30mm Double sided - 377mm x 255mm x 45mm Legend - 280mm x 155mm

IP20

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

NEW VERSION Luminaires

Pico

Low profile 8W or LED single sided emergency exit box The Pico range of low-profile single sided fluorescent exit signs are manufactured from sheet steel and are available in high quality white, brass or chrome options.

This competitively priced high quality exit luminaire is available as a mains option, with 3 hour non-maintained and maintained emergency versions.

The Pico LED version utilises high quality manufacturing design to maximise the high performance and efficiency of the LED’s which provide a reliable lamp life of approximately 50,000 hours.

Pico luminaires are only 65mm deep and are supplied as standard with a rear centre BESA entry, keyhole mounting slots and an opal threshold downlight panel to illuminate the area below the sign.

Pico luminaires are supplied with removeable end-caps, which enable the legend to be removed via either end of the luminaire allowing the Pico to be suitable for cornered installations.

Viewing distance 40 metres

(For Double Sided Versions See Pescara on Page 52)

Mains Luminaires Cat No. PIC8

Lamp Lumens 8W 300mm Single Sided

Emergency Luminaires Cat No. Mode/Lamp PIC8/NM3 NM3 8W 300mm Single Sided

PIC8/M3 M3 8w 300mm Single Sided

PIC/LED/M3 NEW M3 LED Single Sided

Kg 2.50

Lumens* 80E 120S 80E 120S -

Kg 2.60 2.90 2.50 Options Suffix:

Slave Luminaires Cat No. PIC8/#/D PIC/LED/#D NEW

Mode/Lamp Slave 8W Exit Sign Single Sided Slave LED Exit Sign Single Sided

Lumens* 275 -

Kg 2.50 2.50

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V AC/DC Systems * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 385mm x Width 200mm x Depth 65mm

For all Legend details See Page 65

visit: www.orbik.co.uk

/E Economy Version /S Standard Version /CH Chrome Finish /BR Brass Finish /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /TS Push to test switch /ST Self Testing Luminaire

IP20

55

Quarto - designed with safety in mind.

Luminaires

Quarto

Robust 4 sided exit sign Quarto is an impressively robust 4 sided white emergency exit sign manufactured from high quality sheet steel which is suitable for either surface mounting or for large open tall buildings such as railway stations and airports Quarto can be suspended using rod suspension kits available (750mm and 1200mm white rod lengths as standard).

Optional blanking plates are available for Quarto for situations when less than four legends are required Its energy saving compact fluorescent lamp ensures each of the legends and downlight panel receives an impressive even illumination creating a reliable and highly visible exit sign.

Available as a mains or 3 hour non-maintained and maintained emergency luminaires, Quarto is also available as a slave unit operating from a Central battery or Static Inverter System.

Self Test and Intelligent Addressable Emergency versions are also available as options for this flexible exit sign enabling it to be confidently specified for the largest of projects.

Viewing distance 40 metres

Mains Luminaires Cat No. QU16

Lamp 16W 2D

Emergency Luminaires Cat No. Mode/Lamp QU16/NM3 NM3 16W 2D QU16/M3 M3 16W 2D

Lumens -

Kg 6.40

Lumens* 200 200

Kg 7.00 7.30 Options Suffix:

Slave Luminaires Cat No. QU16/#/D

Mode/Lamp Slave 16W 2D

Lumens* 400

Kg 6.40

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 420mm x Depth 420mm x Width 230mm

For all Legend details See Page 65

visit: www.orbik.co.uk

/HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /RS1 Rod Suspension Kit (600mm) /RS2 Rod Suspension Kit (1.2m) /BP White Blanking Plate

IP20

57

Luminaires NEW VERSION

Retz

A decorative curved single and double sided exit sign The Retz is a superbly designed low profile exit sign which can be confidently specified for most prestigious installations.

The elegant design of Retz utilises an attractive curved fascia which is supplied in white finish as standard with silver grey, brass and chrome finishes providing a comprehensive range of options.

The Retz can be used as a mains luminaire, or self contained 3 hour emergency luminaire in either maintained or nonmaintained mode.

Retz single sided

Available as a single or double sided exit sign, this comprehensive range of luxurious emergency luminaires can be specified for projects where both matching single and double sided exit signs are required to compliment each other.

The Retz can be supplied with integral self-test emergency and for use with intelligent addressable emergency systems.

Retz double sided

Viewing distance 40 metres

Mains Luminaires Cat No. RZ8 RZD8 NEW

Brass

Chrome

Silver Grey

Options Suffix: /BR Brass Finish /CH Chrome Finish /SG Silver Grey Finish /ES Electronic Start /HF High Frequency Ballast /AD Intelligent Addressable Luminaire /HPF Power Factor Correction /ST Self Testing Luminaire /WS Wire suspension kit

Lumens - -

Kg 1.60 2.00

Emergency Luminaires Cat No. Mode/Lamp RZ8/NM3 NM3 8W Single Sided RZ8/M3 M3 8W Single Sided RZD8/NM3 NEW NM3 8W Double Sided RZD8/M3 NEW M3 8W Double Sided

Lumens* 120 120 120 120

Kg 2.00 2.20 2.40 2.60

Slave Luminaires Cat No. RZ8/#D RZD8/#D NEW

Lumens* 275 275

Kg 2.00 2.00

Mode/Lamp Slave8W Single Sided Slave 8W Double Sided

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions- Single Sided: Length 440mm x Height 220mm x Depth 65mm

Double Sided: Length 440mm x Height 250mm x Depth 130mm

IP20

58

Lamp 8W Single Sided 8W Double Sided

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

Luminaires

Rota

Led exit signs suitable for wall or ceiling mounting The Rota is a superbly designed range of LED Exit Signs, which combines long-life LED Technology with High Quality engineering.

The versatile design of the Rota allows wall or ceiling mounting with a range of high quality finishes including white, brass, chrome, black or silver-grey (RAL-9006) Suitable for non-maintained and maintained modes this 3 hour exit sign also includes a new recessed version suitable for almost any prestigious project.

Both the surface and recessed versions utilise the unique high quality plasi-glas legends with flame polished edges which ensure that the light distribution is effectively and evenly diffused across the legend resulting in a high performance, impressive and reliable emergency luminaire.

Can be used with single and double-sided legends (please specify when ordering)

Rota recessed finished in white

Rota finished in chrome Viewing distance 32 metres

Emergency Luminaires Cat No. Mode/Lamp RO/LED/M3/WH M3 White LED Exit Sign RO/LED/M3/BR M3 Brass LED Exit Sign RO/LED/M3/CH M3 Chrome LED Exit Sign RO/LED/M3/BK M3 Black LED Exit Sign RO/LED/M3/SG M3 Silver Grey LED Exit Sign

Lumens - - - - -

Kg 2.00 2.00 2.00 2.00 2.00

* For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 310mm x Height 240mm x Depth 40mm Cut out dimensions: Length 310mm x Height 60mm x Depth 35mm

For all Legend details See Page 65

visit: www.orbik.co.uk

White

Brass

Silver-Grey

Black

Chrome

Options Suffix:

IP20

/R Recessed Version /ST Self Testing Luminaire

59

Romney - the ultimate solution.

Right angle mount

Wall mount

Wire suspension

Luminaires

Romney

Flexible LED exit sign Romney is an affordable, robust flexible exit sign featuring LED’s with a 50,000-hour lamp-life.

This economically designed 3 hour emergency luminaire has been specifically engineered to ensure Romney benefits from the latest LED technology.

Romney is available in white and has the choice of two legend sizes (135mm as standard and an optional 180mm version) with optional wire mounting suspension kits for high-ceiling applications.

Additional end or wall mounting kits can be specified to enable Romney to be used as a single or double-sided exit sign emphasising the wide range of variations.

Viewing distance 20 metres (135mm legend)

Viewing distance 30 metres (175mm legend)

Romney with optional wire suspension kit

Emergency Luminaires Cat No. Mode/Lamp ROM/LED/M3 M3 LED Exit Sign

Lumens* -

* For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Length 300mm x Width 195mm x Depth 40mm (135mm Legend) Length 300mm x Width 240mm x Depth 40mm (180mm Legend)

For all Legend details See Page 65

visit: www.orbik.co.uk

Kg 1.60

Options Suffix: /RAB Right Angled Mounting Bracket /WMB Wall Mounting Bracket /WS Wire Suspension Kit /ST Self Testing Luminaire

IP20

61

Luminaires

Savona

Edge-lit exit signs in single and double-sided versions Savona is an edge-lit exit sign available in a range of high quality finishes. The smooth lines of the new Savona create a product of contemporary design which lends itself for use in many prestigious installations.

Models featuring both fluorescent and high output white light emitting diodes (LED) are available. LED’s have the advantage of a long life combined with a very low maintenance requirement. Which ever light source you choose, Savona offers an elegant exit sign with superb performance.

The flame retardant Plasi-Glas legend panel suspends below the lamp and its light conducting properties ensure even and clear illumination of the panel.

The Savona body is supplied separately from the legend which is assembled with just two screws. This makes ordering single or double-sided signs very simple. If you require a single sided sign simply add the relevant legend number to the product code e.g. SAV8/NM3/L19. If you require a double-sided sign the product code would be SAV8/NM3/L19/D.

Savona with chrome finish

There are two Legend depths available - 270mm as standard or 135mm for areas where height is restricted.

Savona recessed with brass finish

Viewing distances 27 metres (135mm legend) Viewing distances 40 metres (270mm legend)

Options Suffix: /R Recessed Trim /CH Chrome Finish /WH White Finish /BR Brass Finish /AD Intelligent Addressable Luminaire /ST Self Testing Luminaire /RAB Right angled mounting bracket

Mains Luminaires Cat No. SAV8

Lumens -

Kg 2.90

Emergency Luminaires Cat No. Mode/Lamp SAV8/NM3 NM3 8W 300mm SAV8/M3 M3 8W 300mm

Lumens* 120 120

Kg 3.00 3.20

Emergency LED Luminaires Cat No. Mode/Lamp SAV/LED/M3 M3 LED

Lumens* -

Kg 3.20

Slave Luminaires Cat No. SAV8/#/D

Lumens* 275

Kg 2.90

Mode/Lamp Slave 8W 300mm Sign

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 445mm x Width 90mm x Depth 340mm Recess Version Dimensions: Length 502mm x Width 152mm Recess Version Dimensions Cut Out: Length 428mm x Width 135mm x Depth 85mm

IP20

62

Lamp 8W 300mm

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

Luminaires

Savona Petite

Compact suspended LED exit sign Savona Petite is a compact suspended emergency exit sign, which utilises the latest LED technology to ensure a long lamp-life of up to 50,000 hours.

Extensive thermal engineering has enabled the Savona Petite to be suitable as a 3 hour non-maintained/maintained emergency luminaire.

Available in white as standard with optional brass or chrome high quality finishes, this exceptionally luxurious suspended exit sign can be confidently specified as a single or double-sided emergency luminaire with additional options including an endmounting wall bracket, creating a reliable universal LED exit sign.

Viewing distances 32 metres

Emergency Luminaires Cat No. Mode/Lamp SP/LED/M3 M3 LED Exit Sign

Lumens* -

Kg 2.70

* For other durations, specify the required time period e.g. /M3 becomes /M1 for 1 hour duration Dimensions: Length 340mm x Depth 275mm x Width 85mm including legend Ceiling Bar: Length 325mm x Depth 20mm x Width 63mm

For all Legend details See Page 65

visit: www.orbik.co.uk

Brass

Chrome

Options Suffix: /CH /BR /ST /RAB

Chrome Finish Brass Finish Self Test Luminaire Right Angled Mounting bracket

IP20

63

Luminaires NEW VERSION

Tiel

IP65 single or double sided exit sign Tiel is a robust IP65 ceiling mounted single or double sided white polycarbonate exit sign.

Suitable for surface or semi-recessed installations.

Its IP65 rating and optional tamper resistant screws, make the Tiel a unique single or double sided sign for all public areas.

Tiel is supplied complete with two self-adhesive legends as standard (please specify) so that the installer can create either a single sided or double sided sign.

Tiel recessed

Viewing distances 28 metres

Mains Luminaires Cat No. TI8 TI2x8 TI11

Options Suffix: /E Economy Output /S Standard Output /H High Output /TI/WH White Finished Semi-recess Trim /TI/BR Brass Finished Semi-recess Trim /TI/CH Chrome Finished Semi-recess Trim /VR Anti-tamper Screws /HPF Power Factor Corrected /HF High Frequency Ballast /ES Electronic Start /AD Intelligent Addressable Luminaire (Non-Maintained Only) /ST Self Testing Luminaire (Non-Maintained Only) /TS Push to Test Switch

Lumens - - -

Kg 0.90 0.90 0.90

Emergency Luminaires Cat No. Mode/Lamp TI8/NM3 NM3 8W 300mm

TI8/M3 M3 8W 300mm

TI2X8/NM3 NM3 2X8W 300mm

TI/LED/M3 NEW NM3/M3 LED

Lumens* 80E 120S 180H 80E 120S 180H 150S 250H -

Kg 1.20

Slave Luminaires Cat No. TI8/#/D TI/LED/#D NEW

Lumens* 275 -

Kg 0.85 0.90

Mode/Lamp Slave 8W Slave LED

1.45

1.70 1.20

* Emergency Lumens # Specify 24, 50, 110 or 230 Volts AC/DC System Voltage. LED Slaves are suitable for 110V and 220V systems. * For other durations, specify the required time period e.g. /NM3 becomes /NM1 for 1 hour duration Dimensions: Length 350mm x Width 108mm x Depth 204mm Cut out dimensions: Length 330mm x Width 90mm

IP65

64

Lamp 1x8W 300mm 2x8W 300mm 11W TC-S

For all Legend details See Page 65

orbik THE LIGHTING SPECIALISTS

Legends

62

P

Savona

Edge-lit exit sign in single and double-sided versions

EN7010 format signs are also available.

L16

L19

L17

L20

L22

L18

L21

L23

visit: www.orbik.co.uk

65

Photometric data

CAT Number

Mounting height (m)

CAD8/NM3/E (M3) 2.5 AR8/NM3/E (M3) 4.0 ED8/NM3/E (M3) 6.0 CAD8/NM3/S (M3) 2.5 AR8/NM3/S (M3) 4.0

6.0 CAD8/NM3 (M3)/H 2.5 AR8/NM3 (M3)/H 4.0

6.0 DAL8/NM3 2.5 DAL8/M3 4.0

6.0 BE8/NM3+BA/NM3 2.5 BE8/M3+BA/M3 4.0 BE8/C3+BA/C3 6.0 CAL8/NM3/M3 2.5 GN8/NM3/M3 4.0 CHE8/NM3/M3 6.0 MZ28/M3 2.5 EC28/M3 4.0

6.0 EC38/M3 2.5

4.0

6.0 MZ16/M3 2.5 LA16/M3 4.0 LV16/M3 + HT16/M3 6.0 HT28/M3 + LN28/M3 2.5 LV28/M3 + KN28/M3 4.0 IDR28/M3 6.0 LA38/M3 2.5 IDR38/M3 4.0

6.0 DAR/LED/M3 2.5

4.0

6.0 ED/LED/M3 2.5

4.0

6.0 GN/LED/M3 2.5 CHE/LED/M3 4.0

6.0 MULTIA18W 2.5

4.0

6.0 MULTIA26W 2.5

4.0

6.0 MULTIA32W 2.5

4.0

6.0 MULTIA42W 2.5

4.0

6.0 OR455/M3 4.0 OR480/M3 6.0

8.0 DY/LED/OA 2.5

3.0

4.0 DY/LED/CR 2.5

3.0

4.0 ELL/LED/OA 2.5

3.0

3.5 ELL/LED/CR 2.5

3.0

3.5

66

Transverse to wall

Transverse spacing

Axial to wall

0.2 4.17 4.18 3.34 4.80 5.00 4.50 5.90 6.50 6.50 5.30 6.00 6.20 4.00 4.20 3.40 3.90 4.90 4.70 5.40 6.30 6.70 5.60 6.60 7.60 4.30 4.60 4.40 4.40 4.80 4.40 5.60 6.60 6.90 3.20 3.50 3.60 3.70 4.70 5.60 3.90 4.70 4.50 4.60 5.60 6.30 5.00 6.00 7.20 3.70 5.40 7.40 4.20 6.10 9.10 9.30 10.80 11.80 4.10 3.70 2.10 4.10 4.30 0.70 4.10 4.00 3.70 4.80 4.90 4.90

0.2 10.92 12.01 11.73 12.40 13.70 14.00 15.20 17.00 18.20 13.30 15.30 16.80 10.10 11.40 11.50 8.90 12.20 11.80 13.40 15.90 17.00 13.80 16.50 19.10 10.60 12.30 13.00 11.10 12.80 13.60 13.80 16.50 17.70 8.20 8.50 9.90 10.00 10.90 13.50 8.90 11.30 11.10 9.40 12.40 14.70 10.00 13.00 16.80 8.20 11.80 16.30 9.10 12.90 17.90 22.30 26.60 29.70 11.90 12.00 10.80 16.00 14.70 11.60 10.40 11.00 11.30 11.70 12.70 13.30

0.2 3.28 3.48 2.69 3.70 4.10 3.80 4.40 5.10 5.40 5.00 5.70 6.00 3.50 3.90 3.10 2.90 3.20 3.00 5.40 6.30 6.70 5.60 6.60 7.60 4.30 4.70 4.30 4.50 4.80 4.40 5.60 6.60 6.90 3.20 3.50 3.60 3.10 3.20 3.00 2.70 2.80 2.00 4.60 5.60 6.30 5.00 6.00 7.20 3.70 5.40 7.40 4.20 6.10 9.10 6.50 8.60 10.30 4.10 3.70 2.10 3.40 2.50 0.80 4.10 4.00 3.70 3.80 3.80 3.70

0.5 2.45 N/A N/A 3.20 2.80 N/A 4.10 4.10 3.00 3.80 3.90 N/A 2.70 1.90 N/A 3.10 3.80 2.00 4.00 4.40 4.40 4.20 4.50 5.20 3.00 2.70 N/A 3.20 2.80 N/A 4.20 4.50 4.50 2.20 2.80 2.70 2.90 3.10 N/A 2.80 2.10 N/A 3.70 4.20 4.30 4.10 4.70 5.70 2.40 3.30 3.90 2.90 3.90 5.30 7.00 7.90 8.20 1.40 - - 0.50 - - 2.20 1.30 - 2.90 2.50 -

1.0 1.63 N/A N/A 2.10 N/A N/A 3.00 1.30 N/A 2.90 1.30 N/A 1.70 N/A N/A 2.70 1.40 0.50 3.10 3.00 2.50 3.20 3.10 3.40 2.20 N/A N/A 2.30 N/A N/A 3.00 3.30 N/A 1.80 2.10 2.40 2.50 N/A N/A 1.80 0.50 N/A 3.00 3.20 2.20 3.40 3.80:: 3.50 3.20 3.80 3.60 4.10 4.90 5.90 5.50 5.80 5.40 0.60 - - 1.30 - - - - - 0.90 - -

0.5 7.94 5.60 N/A 8.60 8.70 7.10 10.70 11.50 11.10 9.70 10.80 10.50 7.40 7.30 4.60 7.10 10.10 8.80 10.00 11.50 12.10 10.40 11.90 13.80 7.80 8.30 7.00 8.10 8.60 7.40 10.40 11.90 12.50 5.80 6.80 6.10 7.10 7.70 5.80 5.70 7.70 N/A 7.70 9.50 10.60 6.90 9.80 10.30 7.30 10.40 13.80 7.90 11.40 16.10 17.20 19.90 21.70 6.80 6.00 1.40 7.30 5.10 - 7.20 6.80 5.90 8.60 8.70 8.20

1.0 5.29 3.73 N/A 6.30 5.40 N/A 8.10 8.00 7.30 7.50 7.80 N/A 5.30 4.00 N/A 7.20 4.90 2.90 7.80 8.60 8.60 8.20 8.90 10.20 5.90 5.30 N/A 6.10 5.50 N/A 7.50 8.40 9.00 4.90 5.20 5.40 5.80 5.10 N/A 6.10 3.00 N/A 7.00 7.40 7.60 7.20 8.90 7.30 7.10 9.60 11.20 7.80 10.70 14.30 13.80 15.60 16.20 4.20 - - 5.10 - - 4.10 2.40 - 5.70 4.60 2.50

0.5 2.01 N/A N/A 2.60 2.40 N/A 3.20 3.40 2.50 3.60 3.80 N/A 2.40 1.60 N/A 2.70 2.90 1.50 4.00 4.40 4.40 4.20 4.50 5.20 3.00 2.70 N/A 3.10 2.80 N/A 4.20 4.50 4.50 2.20 2.80 2.70 2.20 2.40 N/A 2.40 1.60 N/A 3.70 4.20 4.30 4.10 4.70 5.70 2.40 3.30 3.90 2.90 3.90 5.30 5.60 7.20 8.30 1.40 - - 0.80 - - 2.20 1.30 - 2.30 1.90 1.30

1.0 1.34 N/A N/A 1.80 N/A N/A 2.40 2.00 N/A 2.80 1.50 N/A 1.50 N/A N/A 1.40 0.50 N/A 3.10 3.00 2.50 3.20 3.10 3.40 2.20 N/A N/A 2.10 N/A N/A 3.00 3.30 N/A 1.80 2.10 2.40 1.40 N/A N/A 1.00 N/A N/A 3.00 3.20 2.20 3.40 3.80 3.50 3.20 3.80 3.60 4.10 4.90 5.90 4.90 6.00 6.60 0.60 - - 0.60 - - - - - 0.90 - -

orbik THE LIGHTING SPECIALISTS

Photometric data

Axial spacing

Transverse to axial spacing

0.2 8.23 9.57 9.77 8.90 10.60 11.50 10.30 12.70 14.50 13.00 14.90 16.50 8.80 10.10 10.40 7.40 8.10 7.90 13.40 15.90 17.00 13.80 16.50 19.10 10.70 12.30 13.00 11.10 12.70 13.60 13.80 16.50 17.70 8.20 8.50 9.90 9.00 9.80 11.00 6.90 7.80 6.80 9.40 12.40 14.70 10.00 13.00 16.80 8.20 11.80 16.30 9.10 12.90 17.90 13.80 18.90 23.10 11.90 12.00 10.80 8.20 8.80 7.50 10.40 11.00 11.30 9.30 10.00 10.40

0.2 9.59 10.73 10.76 8.50 9.10 8.30 9.70 10.80 10.70 12.60 14.40 16.00 9.40 10.80 11.00 8.10 10.70 10.80 13.40 15.90 17.00 13.80 16.50 19.10 10.70 12.40 13.00 11.00 12.70 13.60 13.80 16.50 17.70 8.20 8.50 9.90 8.10 8.80 8.60 8.10 10.10 10.30 9.40 12.40 14.70 10.00 13.00 16.80 8.20 11.80 16.30 9.10 12.90 17.90 17.40 22.00 25.80 11.30 12.00 10.80 12.10 9.80 8.00 10.40 11.00 11.30 10.50 11.30 11.80

0.5 6.62 4.56 N/A 6.70 7.20 5.80 8.00 9.30 9.30 9.40 10.60 10.40 6.50 6.50 4.00 6.40 6.90 6.70 10.00 11.50 12.10 10.40 11.90 13.80 7.80 8.90 7.00 8.10 8.60 7.40 10.40 11.90 12.50 5.80 6.80 6.10 6.20 6.60 4.00 5.50 6.20 N/A 7.70 9.50 10.60 6.90 9.80 10.30 7.30 10.40 13.80 7.90 11.40 16.10 12.40 16.40 19.40 6.80 6.00 1.40 4.80 3.10 - 7.20 6.80 5.90 6.60 6.60 6.30

1.0 4.41 3.04 N/A 5.10 4.60 N/A 6.30 6.70 4.20 7.50 7.60 N/A 4.90 3.30 N/A 4.50 3.10 2.00 7.80 8.60 8.60 8.20 8.90 10.20 5.90 5.30 N/A 6.10 5.50 N/A 7.50 8.40 9.00 4.90 5.20 5.40 4.80 3.50 N/A 3.80 2.00 N/A 7.00 7.40 7.60 7.20 8.90 7.30 7.10 9.60 11.20 7.80 10.70 14.30 11.10 14.20 16.50 4.20 - - 2.60 - - 4.10 2.40 - 4.40 3.70 2.40

visit: www.orbik.co.uk

0.5 7.28 5.07 N/A 5.80 5.20 N/A 6.90 6.80 3.90 9.00 10.40 10.50 7.00 6.90 4.30 6.80 7.30 6.10 10.00 11.50 12.10 10.40 11.90 13.80 7.80 8.40 7.00 8.00 8.60 7.40 10.40 11.90 12.50 5.80 6.80 6.10 6.90 7.20 5.30 5.60 N/A N/A 7.70 9.50 10.60 6.90 9.80 10.30 7.30 10.40 13.80 7.90 11.40 16.10 14.30 17.80 20.30 6.80 6.00 - 5.10 3.20 - 7.20 6.80 5.90 7.60 7.60 7.20

1.0 4.85 3.38 N/A 3.90 N/A N/A 4.90 3.50 N/A 7.30 7.50 N/A 5.00 3.70 N/A 5.70 4.30 N/A 7.80 8.60 8.60 8.20 8.90 10.20 5.90 5.30 N/A 6.00 5.50 N/A 7.50 8.40 9.00 4.90 5.20 5.40 3.90 3.40 N/A 5.00 N/A N/A 7.00 7.40 7.60 7.20 8.90 7.30 7.10 9.60 11.20 7.80 10.70 14.30 12.20 14.70 16.10 4.20 3.2 4.10 2.40 5.10 3.80 2.30

Notes: These tables are based on the following factors: Light output ratios measured to BS5225 and lamp lumen outputs are from GE Lighting Warm white lamps.

Requirements from BS5266/EN1838

Permanently unobstructed escape routes: Require minimum 0.2 lux along the centre line of the escape route, where there is a possibility of an obstruction occuring along the route 1 lux minimum is required.

Undefined, Open areas: The minimum level of illumination required throughout the area is 0.5 lux excluding a half metre border around the edge of the room which can be at a lower level.

TWINSPOT SPACING DATA (1 LUX AVERAGE) Mounting Height

Spacing to Wall

Between Units

2 x 21 Watt Tungsten Versions 2.5 metres 4 metres 6 metres 8 metres

3m 4m 3m 3m

9m 11m 12m 10m

2 x 20 Watt Tungsten Halogen Versions 2.5 metres 4 metres 6 metres 8 metres

5m 6m 5m 4m

15m 16m 16m 15m

2 x 55 Watt Tungsten Halogen Versions 8 metres 10 metres

8m 8m

20m 20m

These tables are to be used as a guide only.

Please refer to www.relux.biz for accurate photometric planning

67

Design guide

Design Guide NON -MAINTAINED

MAINTAINED

The lighting only operates when the normal mains supply fails (emergency lighting only).

FINAL EXIT

To provide illumination of escape routes.

FINAL EXITS

Install externally within 2 metres horizontal distance of any final exits.

Please note that sufficient light will be needed to muster a roll call.

LIFTS

To provide emergency illuminations in all lifts.

The lighting operates normally and continues to operate when the normal mains supply fails (mains lighting and emergency lighting).

JUNCTIONS

CORRIDORS

STAIRWAYS

Install within 2 metres of escape route junctions.

Install within 2 metres horizontal distance of a change of direction in an escape route.

Install within 2 metres horizontal distance of change in floor level or stairs (each tread to receive direct light).

ALARM AREAS

ESCALATORS

TOILETS

Should not be used as an escape route, but requires the same illumination to protect users on it when the supply fails.

Install in all toilets exceeding 8m2 area or where natural light is not present.

OPEN AREAS

HAZARDOUS AREAS

Fire alarms, first aid points and fire-fighting equipment, install within 2 metres horizontal distance.

CONTROL ROOMS

Motor generator, control and plant rooms for essential and safety services.

Open rooms either with a particular hazard, an escape route passing through or larger than 60m2 .

Areas of high risk should be illuminated to 10% of normal lighting or 15 lux, whichever is greater.

Lighting requirements When luminaires have been sited to cover the locations above, additional luminaires may be required to ensure minimum lighting levels are achieved. We provide spacing tables for this purpose. Spacing tables advise how far to locate the first luminaire, then how far apart other luminaires should be located for a given mounting height.

Installation to the spacings will ensure the lighting levels will be achieved.

68

Escape route corridors etc: 1 lux minimum on the centre line of the escape route.

Open Areas: 0.5 lux minimum in the central core to within 0.5m of the walls.

Exit signs – Signs should apply to the European Signs Directive and be either back illuminated or have an emergency luminaire within 2m of horizontal height.

Signs should be of the same format throughout the building.

orbik THE LIGHTING SPECIALISTS

Design guide

Relux ORBIK is a fully registered member of Relux Powered by Relux the full comprehensive range of ORBIK products is available free of charge to be downloaded via our website at: www.orbik.co.uk or at: www.relux.biz in a UK format.

Orbik are able to offer the most technical advanced and user friendly lighting design software available in todays market. Our built in database has a full technical library on all of our products, including photometric data and product data sheets.

A complete lighting design solution which is fast and simple to create, the Relux express mode will guide you through the lighting calculation on an intuitive, step by step basis.

Once the design is complete the results can be complied into an impressive structured report, table results and 3D computer generated visualisations.

Designs can be competed to meet the requirements of the latest European and British standards, using dedicated emergency luminaires, converted mains lighting luminaires or a combination of mains and emergency luminaires for a complete design solution.

visit: www.orbik.co.uk

69

Luminaires

Power is nothing without control.

06

orbik THE LIGHTING SPECIALISTS

NEW VERSION Self contained emergency gear conversion kits

Conversion modules suitable for low Mercury dosage lamps with self test options Lamp manufacturers are committed to reducing or eliminating the mercury used in fluorescent lamps to lessen the impact on the environment when these lamps require disposal at the end of their usable life. These actions are being driven in Europe by the WEEE and RoHS directives which impose ever lower levels of the potentially hazardous mercury used in lamps. To help combat some of the problems introduced by these lower mercury levels, including ‘pink limbs’ on certain compact lamps and severely reduced life or premature blackening of the lamp cathodes in all fluorescent lamps, Orbik’s PERFERM ™ modules employ enhanced lamp striking technology combined with a high level of continuous lamp cathode heating throughout the emergency operation period.

Since their introduction in 2001 Orbik’s PERFERM™ conversion modules have become the units of choice for major emergency lighting companies within Europe and the Middle and Far East and can be confidently relied upon to operate a wide range of low mercury fluorescent lamps for emergency lighting.

We offer our Perferm ™ conversion modules in two formats to allow the end user flexibility and cost effective performance dependent on the type of mains control gear employed in their emergency luminaires. For conventional switch-start based luminaires the PH4000 and PL4000 series are suitable.

Where electronic ballasts are installed the luminaire PLR5000 and PHR5000 conversion modules should be used as these incorporate an additional switched supply delay relay facility to ensure the mains supply to the electronic ballast is completely isolated whenever the conversion module is in its emergency operation mode. This switched supply delay relay ensures the electronic ballast has time to reset and never encounters the “no lamp” or “incorrect lamp” condition that can occur when a keyswitch is used to remove only the permanent main feed to the emergency luminaire during emergency testing. Electronic ballasts can ‘lock out’ under these conditions and may require their mains supply to be disconnected for a short period to reset the lamp failure circuitry and in some instances the electronic ballast can fail completely.

NEW Self-test Conversion Modules As a result of the recently introduced EN50172 it is now a legal requirement to regularly test emergency luminaires and to assist with this function and to reduce installation times during production a new range of ORBIK PERFERM™ modules are being introduced which contain an integral self testing facility. This will offer a comprehensive and standards compliant test and reporting regime to remove many of the labour and time consuming aspects of the emergency lighting testing requirements. By measuring three critical lamp performance parameters the ORBIK self-testing system ensures the buildings emergency lighting system performs to its maximum efficiency and any defects are detected and reported promptly.

KM21518

visit: www.orbik.co.uk

71

Self contained emergency gear conversion kits

Technical Specification Ballast lumen factors for control gear incorporating Perferm™ technology (suitable for all lamps including low Mercury & Amalgam lamps) MODULE NUMBER

BATTERY

MODULE OPTIONS

M2019/3 (Non-Maintained)

SELF TEST PH4003P3 PL4003P3 PLR5003P3 PLS5003P3

PH4007P3 PL4007P3 PLR5007P3 PLS5007P3 PH4009P3 PL4009P3 PLR5009P3 PLS5009P3 PH4013P3 PL4013P3 PLR5013P3 PLS5013P3 PH4018P3 PL4018P3 PLR5018P3 PLS5018P3

T8

T5

BATTERY T8 T5 CELL 18W 36W 58W 70W 100W 8W 14W 21W 24W 28W 35W 39W 49W 54W 80W 2 x 4AH 26 3 x 4AH 12 9 4 x 4AH 10 5 x 4AH

7

3 x 4AH 25 3 x 4AH

MT5414P3 4 x 4AH 32 PH4418P3 PL4418P3 PLR5418P3 PLS5418P3 4 x 4AH 23 42 PH4005P3 PL4005P3 PLR5005P3 PLS5005P3 4 x 4AH 11 10 30 21

MT5528P3 PH4506P3 PL4506P3 PLR5506P3 PLS5506P3 PH4008P3 PL4008P3 PLR5008P3 PLS5008P3 PH4011P3 PL4011P3 PLR5011P3 PLS5011P3

PHR5607P3 PHS5607P3 PHR5608P3 PHS5608P3

5 x 4AH 28 25 26 5 x 4AH 13 28 25 5 x 4AH 11 21 5 x 4AH

6 x 4AH 18 6 x 4AH 11 10

MT5854P3 8 x 4AH

PHR5809P3 PHS5809P3 8 x 4AH 15 14 9

PHR5108P3 PHS5108P3

10 x 4AH

17

27 27

24 24

20 20

17 17

10

10

Fixing centres

72

Module

A

B

C

D

E

Kg

PH

154

42

35

144

138

0.33

PL/PLS

203

42

28

193

187

0.34

PLR

216

42

28

206

200

0.35

PHR/PHS

216

42

35

206

200

0.54

MT5

345

32

28

336

–

0.34

M

154

42

35

144

138

0.33

orbik THE LIGHTING SPECIALISTS

Self contained emergency gear conversion kits

T5 CIRCULAR

T5 CIRCULAR

2D

2D

TC-L

TC-L

TC-S/E

TC-D/E

TC-T/E AMALGAM

TC-S/E TC-D/E TC-T/E AMALGAM

22W 40W 55W 60W 16W 28W 38W 55W 18W 24W 34W 36W 40W 55W 9W 11W 13W 18W 26W 13W 14W 17W 18W 26W 32W 42W 57W

10 16 12

25 22 30

40 42 30 12 25 17 18 13 12 12

15 13 11 24 29 14 15 14 11 14 11 9 8

17 16 25 23 21

28 25 22

22 20

16 15 13 14 12 12

20

30 15

18

• Perferm™ technology is an ongoing development involving the latest lamp technology and as such is subject to change as and when further lamps/data become available • We strongly recommend that modules incorporating Perferm™ technology are used in all emergency luminaires and conversions to provide the ultimate future proofing against lamp evolution • Most modules and PCB’s are tested and approved to EN61347-2-7. They are EMC compliant to EN55015, CE marked where applicable and carry the British Standard Kitemark • They incorporate over temperature and charger short circuit protection • Mains supply 230V - 6% + 10% 50/60 Hz power consumption 8VA (other supply Voltages available on request) • Output circuitry uses a high efficiency sinusoidal inverter, with nominal operating current of 1.1 Amps

visit: www.orbik.co.uk

• Available as standard in 3 hour operation (other durations to order) • All modules have battery over discharge protection as standard (DDP) to prevent discharge below 1 Volt per cell • Reverse battery polarity protected • All connections are via terminal blocks with a green light emitting diode (LED), to indicate correct charging conditions. All products are supplied with LED indicators • Operating temperature range module 0 to 70°C (centre side of case) • Printed circuit boards 0 to 90°C (coil/core of charging transformer) • All ballast lumen factors are shown as worst case • All figures are based on an ambient temperature of 25°C

13

All figures quoted assume integral conversions.

Because of the variability of fluorescent lamps, this lamp and module compatibility chart is for guidance purposes only and does not cover all of the available lamp types. If you require information on lamps not shown in this table or connection diagrams for our conversion modules please refer to our wesite or contact our technical department on: technical@orbik.co.uk

KM21518

73

Self contained emergency gear conversion kits

Joule range

Combined mains and emergency lighting ballasts for single compact lamps Features: • Combined electronic ballast and emergency modules for compact lamps • Incorporating our PERFERM™ technology to ensure optimum operation of low mercury and amalgam construction lamps from both ‘cold start’ and warm start applications • The electronic ballast circuit has a lamp failure protection circuit to prevent damage occurring to the ballast when a lamp falls •

Sine-wave output in emergency prevents unpleasant visual lamp effects and ensures maximum lamp cathode life • Advanced battery charging circuit exploits energy absorption charging technology which reduces power losses in the unit, is reverse polarity protected and provides stable charge conditions to maximise battery life • Joule combined units have Deep Discharge Protection to further help in preventing damaging operating conditions for the battery pack and are suitable for use with Ni-Cad and Ni-MH cells • Designed to comply with the requirements of the European product standards EN 60924, EN 60925, EN 60929, EN55015, EN61000.3.2, EN 61547, EN61347-2-7 and EN 61347-2-3 • Produced in our UK manufacturing plant which is registered and audited

by BSI to BS EN ISO 9001:2008

Cat No. Cells 16W 2D

MCP4100P3 MCP4097P3 MCP4099P3 MCP4098P3 MCP4101P3

3x4AH 3x4AH 4x4AH 4x4AH 5x4AH

15 - 21 - -

Single 18W TC-D 22W T5C

- 19 - 21 -

- - - 17 -

Single 26W TC-D

28W 2D

36W TC-F

38W 2D

40W T5 C

- - 18 - -

- 12 - 15 -

- - - - 10

- - - - 13

12

*’Cold start’ deemed to be temperatures above 10°C All modules supplied with green LED.

KM21518

74

All modules are BSI Kitemarked.

All of the products are for 3 hour duration, for other durations, specify the required time period e.g. P3 becomes P1 for 1 hour duration Dimensions: 180mm x 70mm x 35mm Fixing Centres: 170mm Weight: 0.54Kg

orbik THE LIGHTING SPECIALISTS

Self contained emergency gear conversion kits

Emergency conversions within quality systems ISO9001: 2008 and ICEL 1004 approved Orbik manufacture a comprehensive range of BSI approved emergency control gear within their ISO9001: 2008 approved factory in the UK.

Emergency Conversions

One of the many added-value services ORBIK offer to their customers is the re-engineering of third party mains only luminaires into emergency versions.

This operation is carried out and tested by highly skilled personnel working within a ISO9001:2000 quality environment and registered to ICEL and approved to its ICEL 1004 Luminaire re-engineering scheme.

Facilities on site include testing for thermal endurance and EMC compliance for reengineered luminaires so that customers can be confident that these luminaires remain compliant with European product safety and performance standards and comply with the CE regulations.

Orbiks BSI approved emergency control gear ensures the highest quality products are used to convert free issued luminaires with a choice of integral or remote solutions for most 4 pin fluorescent lamps and 12V halogen dichroic lamps.

With reduced mercury lamps being standardised on by most leading lamp manufacturers, Orbiks BSI approved Perferm emergency modules are specified for these lamp types as their in-house design ensures reliable striking of the latest generation of 4 pin compact and linear fluorescent lamps.

visit: www.orbik.co.uk

75

Lighting industry for over 25 years...

49

P

Orbe

Two lines of copy to help explain the products primary features

Self contained emergency gear conversion kits

Remote Emergency Systems

A full range of pre-wired emergency control remote boxes

With the constant development of low-energy compact fluorescent lamps, luminaire designers are now able to design smaller low profile luminaires. With the increasing requirements of emergency lighting in Public Buildings, these smaller luminaires can present problems where they are physically too small and hot to house integral emergency lighting control gear and batteries. For such applications we offer a full range of pre-wired emergency control remote boxes which can be mounted adjacent to the luminaire and simply connected via a flexible 0.5 metre, flame retardant, loom. Constructed in a galvanised finish steel enclosure without side panels for easy access.

If you require this service simply prefix the product with RB/ i.e. PL4003P3 = RB/PL4003P3.

Dimensions (mm) Size Upto 3 cell Upto 5 cell Upto 10 cell

L 290 425 430

W 95 100 150

H 40 45 50

Printed Circuit Boards

PCB ranges are generally for self contained luminaires where price is a significant factor.

As with most of our products the printed circuit board range are approved to the British/ European Standard EN60924/60925.

PCB Suffix/T have fold over LED. Suffix/TL have an LED. terminal block All of the above products are for 3 hour duration, for other durations, specify the required time period e.g. P3 for 1 hour duration becomes P1

Dimensions (mm) Printed Circuit boards Length

Non-Maintained Maintained with C/O Relay

40 40

114 114

31 31

30 30

P404/3/TL*

2 x 4AH

45 22

30 26

P226/3/TL

P232/3/TL*

3 x 4AH

45 33

33 37 28

PERFERM

P1028/3/TL

3 x 4AH

PERFERM

P1038/3/TL

5 x 4AH

8W 300mm

P400/3/TL

38W 2D 4 Pin

28W 2D 4 Pin

16W 2D 4 Pin

9W TC-S 4 Pin

7W TC-S 4 Pin

No. of Cells

6W 225mm

Maintained PCB’s for external gear Circuits

4W 150mm

Non-Maintained PCB’s

123 123

Width Fixing Centres End Height

Fixing Centres

20 12 13

* Only suitable for Switchstart circuits.

PCB suffix/T have a fold over LED. Suffix/TL have an LED terminal block. All PCBs supplied with a green LED. All of the above products are for a three hour duration, for other durations specify the required time period e.g. for 1 hour duration change part number from /3 to /1.

BSI Approved visit: www.orbik.co.uk

77

Self contained emergency gear conversion kits

Nickel Cadmium Batteries

In today’s competitive environment it is often the hidden elements of a product where “savings” are made. In the case of self contained emergency lighting luminaires, it is often the Nickel Cadmium battery which is judged to be an item where money can be saved, often to the detriment of product performance, life, maintenance, and ultimately safety of lives.

We have a policy of using quality, high temperature Nickel Cadmium batteries manufactured by world class companies using premium materials and graded to the demanding standards of IEC285, and when installed and operated in accordance with EN60598.2-22 meet the requirements for a 4 year life.

In addition to the many standard battery configurations illustrated in this catalogue, we are able to offer special battery configurations to assist in the layout of components within luminaires having restricted space.

Redesigned endcaps now allow for inline batteries to be dove-tailed together creating dual-in-line packs.

Nickel Metal Hydride The Green Alternative

Anticipating the growing awareness for the need to care more for our environment, we have had an “alternative” battery development program in place since 1996. Whilst the nickel cadmium battery is still specified in the majority of our emergency lighting products, there is no doubt that it is becoming expensive to dispose of both financially and environmentally due to the heavy metals and other pollutants which form part of the chemistry of each cell.

We have been working closely with both sealed recombination lead acid battery manufacturers and nickel metal hydride battery manufacturers to find the most economical and practical alternative to nickel cadmium. Our experience with nickel metal hydride battery packs used in self contained luminaires sited in locations with elevated temperatures, is second to none and we are confident that these batteries, when used in the correct way, have many advantages over other battery technologies.

These are supplied in 2 and 3 Cell variations to enable most Cell combinations to be easily constructed.

• N iMh batteries are kinder to the environment than NiCd and are cheaper to dispose of at the end of life • N iMh batteries have a better power density than NiCd and lead acid batteries from a smaller size cell, so can be used in products where space is limited igh temperature NiMh batteries are particularly designed for emergency • H lighting applications which some alternative battery technologies cannot provide • N iMh batteries have a lower cost and longer active life than Lithium batteries, which means being environmentally friendly is not too costly • N iMh battery technology is advancing all the time and there is little doubt they will become increasingly popular, so designing battery and product layouts using NiMh can sizes is an investment in the future Whether the future of your next emergency lighting installation or the future of the World is your prime consideration, NiMh batteries should feature high on your list of priorities

78

orbik THE LIGHTING SPECIALISTS

Self contained emergency gear conversion kits

Technical Details For battery packs Battery Cat No. Pack 2x4 AH NMH BH164 3x4 AH NMH BH167 2x1.5 AH Nicad B163/215 2x4 AH Nicad B164/24 2x4 AH Nicad B161/2 x 4 3x1.5 AH Nicad B165/315 3x4 AH Nicad B166/3x4 3x4 AH Nicad B167/34 4x1.5 AH Nicad B168/415 4x4 AH Nicad B169/4x4 4x4 AH Nicad B702/4x4 4x4 AH Nicad B170/44 5x1.5 AH Nicad B171/515 5x4 AH Nicad B172/5x4 5x4 AH Nicad B173/54 6x1.5 AH Nicad B174/615 6x4 AH Nicad B176/64 6x4 AH Nicad B701/6x4 8x4 AH Nicad B878/84 8x4 AH Nicad B879/8x4 10x1.5 AH Nicad B177/1015 10x4 AH Nicad B178/104 10x4 AH Nicad B179/10x4

Duration (Hours) 3 3 1 3 3 1 3 3 1 3 3 3 1 3 3 1 3 3 3 3 1 3 3

Length A 140 210 125 164 65 167 99 226 209 130 123 285 251 163 346 293 406 182 525 242 451 648 300

Width B 20 20 27 36 72 27 65 36 27 65 75 36 27 65 36 27 36 75 36 75 54 36 75

Depth C 20 20 25 36 36 25 34 36 25 34 36 36 25 34 36 25 36 36 36 36 25 36 36

Fixing Centre Style Battery D Weight (Kgs) 70 IN-LINE 0.14 70 IN-LINE 0.21 113 IN-LINE 0.10 149 IN-LINE 0.29 - SidexSide 0.28 155 IN-LINE 0.15 40x33 PLATE 0.47 214 IN-LINE 0.43 197 IN-LINE 0.20 40x65 PLATE 0.59 108 DUAL 0.58 270 IN-LINE 0.57 239 IN-LINE 0.25 40x97 PLATE 0.78 331 IN-LINE 0.70 281 IN-LINE 0.30 391 IN-LINE 0.83 167 DUAL 0.84 510 IN-LINE 1.00 227 DUAL 1.35 239 DUAL 0.50 633 IN-LINE 1.40 285 DUAL 1.35

All dimensions in mm

Cells 1.5AH Nicad for 1 hour duration modules/PCB’s. 4AH Nicad + NMH for 3 hour duration modules/PCB’s

Permitted cell temperature Minimum 0°C. Maximum 54°C, to give the specified performance for an expected life of 4 years

Battery connections Batteries are supplied with tag connections with the exception of dual in-line and plate versions, which are fitted with a non-reversable plug. The appropriate connections are supplied with the batteries.

Battery fixing Batteries are supplied with plastic end caps or metal plates with screwserts with provision for screw fixings.

visit: www.orbik.co.uk

79

Low voltage emergency lighting

Low Voltage Emergency Lighting Emergency lighting kits to operate 12 volt tungsten halogen lamps in the event of a power failure These are available in three modes: • Non-maintained (NM) where the lamp is only illuminated when power fails • Remote Maintained where a separate transformer is used, ideal for dimming installations or where matching mains operation characteristics are critical.

• Maintained (M) where the unit is supplied with an integral transformer.

C

A

B

All units incorporate a BSI Approved Charger Circuit to maximise battery life and deep discharge battery protection, essential for Lead Acid batteries. They are housed in a white epoxy coated sheet steel enclosure, and are supplied with 5 year life sealed Lead Acid batteries.

LOW-VOLTAGE EMERGENCY BOX - ECONOMY VERSION (BALLAST LUMEN FACTOR 20W - 6% 50W - 10%)

Duration Dimensions (Size in mm) Cat No. Mode 1 Hour 2 Hours 3 Hours A B C Fixing Centres Kg R931/50 Non-Maintained D

R932/50 Maintained with C

Maintaining Transformer R942/50 Maintained without

Maintaining Transformer A

2 x 20W 5 x 20W 1 x 50W 2 x 20W 2 x 50W 5 x 20W

1 x 50W 3 x 20W 1 x 50W 2 x 20W 1 x 50W 3 x 20W

1 x 50W 2 x 20W 1 x 50W 2 x 20W 1 x 50W 2 x 20W

250

230

72

187

4.0

250

230

72

187

5.0

250

230

72

187

4.0

LOW-VOLTAGE EMERGENCY BOX - 12V B VERSION (BALLAST LUMEN FACTOR = 100%)

Duration Dimensions (Size in mm) Cat No. Mode 1 Hour 2 Hours 3 Hours A B C R939/50 Non-Maintained

R940/50 Maintained with

Maintaining Transformer R943/50 Maintained without

Maintaining Transformer R760/50 Non-Maintained

R759/50 Non-Maintained

R757/50 Maintained with

Maintaining Transformer R758/50 Maintained with

Maintaining Transformer R700/50 Maintained with 2x 50W

Maintaining Transformer R700/100/M3 Maintained with Maintaining

Transformer R835/50 Maintained without

Maintaining Transformer R836/50 Maintained without

Maintaining Transformer

80

Fixing Centres Kg

1 x 50W 1 x 20W 1 x 20W 250 230 72 187 2 x 20W 1 x 50W 1 x 20W 1 x 20W 250 230 72 187 2 x 20W 1 x 50W 1 x 20W 1 x 20W 250 230 72 187 2 x 20W 2 x 20W 1 x 20W 1 x 20W 315 270 110 120 1 x 50W 5 x 20W 3 x 20W 2 x 20W 315 270 110 120 2 x 50W 1 x 50W 1 x 50W 2 x 20W 2 x 20W 1 x 20W 315 270 110 120 1 x 50W 2 x 20W 2 x 20W 2 x 20W 315 270 110 120 1 x 50W 1 x 50W 1 x 50W 5 x 20W - - 315 270 110 120 2 x 50W - - - - 2 x 50W 350 320 110 240 - - 5 x 20W 2 x 20W 1 x 20W 1 x 20W 315 270 110 120 1 x 50W - - 5 x 20W 2 x 20W 2 x 20W 315 270 110 120 2 x 50W 1 x 50W 1 x 50W

5.2 6.7 5.5 5.2 10.7 6.7 12.2 13.5 13.5 5.2 10.9

orbik THE LIGHTING SPECIALISTS

Low voltage emergency lighting Low Voltage Lighting Train for 12V MR16 lamps up to 50W Orbik’s low voltage lighting train enables 12 volt Tungsten Halogen lamps to operate in the event of a power failure. The ability to feed the lighting train through ceiling aperture cutouts of 60mm ensures easy installation.

The low voltage lighting train features high quality, high temperature Nickel Cadmium battery cells of 1 hour duration and Nickel Metal Hydride for 3 hour duration, and a silicone coated woven glass fibre sleeving ensure’s the product complies with BS/EN60924 and EN60598.2.22. The lighting train also allows dimming of the Halogen lamps if required.

Emergency Lighting Options

Dimensions (millimetres) Overall Length 740mm (1 hour) and 800mm (3 hour) Lighting Train can fit through Ceiling Cut-Outs of 60mm or above

Cat No. R960/50/NM1 R960/50/M1 R961/50/M1 R962/50/NM3 R962/50/M3 R963/50/M3

Mode Non-Maintained Maintained (with transformer) Maintained (without transformer) Non-Maintained Maintained (with transformer) Maintained (without transformer)

Lamp Duration (1x20W) Duration (1x50W) 50/20W 12V 3 Hours 1 Hour 50/20W 12V 3 Hours 1 Hour 50/20W 12V 3 Hours 1 Hour 50/20W 12V 3 Hours 3 Hour 50/20W 12V 3 Hours 3 Hour 50/20W 12V 3 Hours 3 Hour

Ballast Lumen Factor 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6% 50W - 10% / 20W - 6%

NEW LED Low Voltage Lighting Train for 12V MR16 LED Lamps up to 6W 3 hours Our low voltage lighting train enables 12 volt MR16 LED lamps to operate in the event of a power failure. The ability to feed the lighting train through ceiling aperture cut-outs of 60mm ensures easy installation.

The lighting train is available in Maintained mode (but can be used non-maintained), which is supplied with an integral driver which operates the lamp in mains healthy and in the event of a power failure.

The low voltage lighting train features high quality, high temperature Nickel Metal Hydride battery cells and a silicone coated woven glass fibre sleeving ensuring the product is manufactured to comply with EN61347.2.13 and EN60598.2.22.

Dimensions (millimetres) Lighting Train can fit through Ceiling Cut-Outs of 60mm or above

Cat No. RL5012/6/M3

Mode Maintained (with integral mains driver)

Lamp 1.5/6W 12V

Duration C 3 Hours

Ballast Lumen Factor 3 and 6W 100% B

A

Emergency lighting pcb’s to operate 12 volt tungsten halogen lamps in the event of a power failure

6V & 12V dc Charger PCB

The 6V and 12V DC charger circuits incorporated into our tungsten lead acid remote boxes are also available as separate printed circuit boards to give users full flexibility with their choice of housings, batteries and maintaining components. The facility of a 10A terminal block on each PCB offers a greater degree of flexibility for installation within a remote box/ twinspot/luminaire.

Dimensions (mm) Cat No. Voltage CB112 12V CB106 6V

A

147

Battery Type Mode Lamp Range No. of Outlets VRLA Maintained or 10-100W 2 25Ah max Non Maintained B C D Height 68 135 50 45

BSI Approved

D C

A B

For emergency options for 11W CFL and GU10 see our Mini-Sine on page 88

visit: www.orbik.co.uk

81

SPECIAL PRODUCTS

NEW High Power LED Conversion Kits

High Power LED Conversion Kits The Orbik LED emergency conversion unit is compatible with most LED mains drivers and can be configured to operate a single LED or a series LED array of up to a maximum of 10 LED’s. This conversion unit is compliant with EN61347-2-13 and will operate a range of LED’s over the power range of 3W to 22W and the microprocessor controlled high-efficiency mains monitoring and variable rate switched mode power supply ensure optimum battery performance with minimum power consumption.

An innovative automatic power output sensing circuit monitors the voltage and current demand and will detect and protect itself against over-current demands caused by someone connecting the wrong load to the output terminals and a self-test option is also available to carry out periodic testing in accordance with EN50172.

Module Number Battery Cells

LCM3350 5 x 4 Ah

LED Single LED, 1.0 Watt 7 x 1W LED’s in series 1 x 10W LED cluster 1 x 22W LED cluster

BLF % 100% 100% 60% 30%

The LCM3350 LED conversion module delivers a current limited 350mA to the connected device and is suitable for use with a single LED or cluster LED’s that can operate from less than the 30V DC limit imposed by EN61347-2-13 Dimensions: 203mm x 42mm x 28mm Fixing centres: 193mm Weight: 0.3Kg

Change-over and Sub-circuit Monitor Relay drm415ac

The DRM415AC relay module is an enclosed change-over relay for use with static inverter operated emergency lighting systems and is rated at 1250VA. The DRM415AC can be used with either maintained or non-maintained luminaires, powered from a static inverter and provides local sub-circuit monitoring to comply with the European Standard for centrally supplied emergency systems, EN50171.

For non-maintained operation, the static inverter supply is connected to the DRM415AC together with the local lighting circuits un-switched supply.

Upon loss of the local supply, the relay changes over and the luminaire is operated by the output from the static inverter.

For maintained operation, the switched supply is also connected to the DRM415AC. This allows the luminaire to be switched on and off as though it were a normal mains luminaire. In the event of the local un-switched supply failing the luminaire is operated from the static inverter supply, regardless of whether the luminaire was being operated from the normal mains supply at the time.

A number of different options based upon the DRM415AC are available: DRM415AC: Static inverter changeover relay rated at 1250VA DRM415AC/NR: As above, with neon indicator showing that the static inverter supply is present and healthy DRM415AC/RB: Static inverter change over relay housed within a sheet metal box for remote mounting DRM415AC/RB/NR: As above except with neon indicator showing that the static inverter supply is present and healthy DRM415AC/ADD: Addressable remote box incorporating OEL305 All of the above products can be factory fitted within “free-issued” luminaires, please contact our sales office for information.

Dimensions: 203mm x 42mm x 28mm Fixing centres: 193mm Weight: 0.3Kg

82

orbik THE LIGHTING SPECIALISTS

Inverters for use with Central Systems Incorporating PERFERM™ Technology We produce a range of inverter units suitable for operating fluorescent lamps from low voltage AC or DC supplies, including central battery systems of 24 Volts, 50 Volts and 110 Volts and fluorescent lamps from 4 Watts to 100 Watts.

All PV range inverters incorporate our PERFERM™ technology to ensure good lamp life and correct operation with low mercury fluorescent lamps and sine-wave output to prolong lamp cathode life and prevent unpleasant visual lamp effects.

Inverters for use with Central Systems

They are designed to comply with the European product standards EN50172, EN55015, EN 61547 and EN 61000.3.2 and are produced in our UK manufacturing plant which is registered to BS EN ISO9001:2000 by BSI. Two types of operation are normally encountered in low voltage systems being: 1. Slave inverters - where the lamp is operated only from the inverter unit.

Typical of this type of use is vehicles where there is no mains supply or an emergency lighting system that is separate to the normal lighting luminaires. An example of a slave inverter of this type is our PV289.

2. Inverter units with an AC hold-off relay are used to convert normal mains luminaires to emergency luminaires by switching the lamp from the normal mains control gear to the inverter output when the un-switched monitored mains supply fails. An example of this type of inverter unit is our PVR110.

Luminaire with Slave inverter Low Voltage AC or DC Supply

Inverter Unit

Converted luminaire Switched Supply

Mains ballast

Unswitched Supply

Inverter Unit with AC hold-off relay

Low Voltage AC or DC Maintained Supply

Technical Details

Technical details for inverters • Inverters are designed to conform to EN60924/60925. They are EMC compliant and carry the CE mark.

• Output circuitry uses a high efficiency sinusoidal inverter.

• Operating temperature range Inverter 0 to 70°C (centre side of case).

• DC Inverter Supply Range

Nominal Supply - 16% + 25%

• AC/DC Inverter Supply Range Nominal Supply - 16% + 25% DC supply +/- 10% AC supply Dimensions

Sizes A B C Lamps up to 20W 154 42 35 Inverters with relay 216 42 28 Open PCB versions 131 40 114

D 144 206 31

Fixing Centre E 138 200 -

Kg 0.25 0.35 -

Inverter Dimensions (millimetres)

visit: www.orbik.co.uk

83

Inverters for use with central systems

Technical Specification Inverters For Fluorescent Lamps

No Relay Canned Unit PCB Version

4W (150mm) 5W TC-S 6W (225mm) 7W TC-S 8W (300mm)

24 Volt AC/DC PV288 19288 Power Input BLF AC DC AC DC 11VA 4.3W 0.44 0.36 12VA 4.7W 0.68 0.40 13VA 5.0W 0.56 0.41 13VA 5.5W 0.39 0.38 15VA 6.3W 0.60 0.47

50 Volt AC/DC PV289 19289 Power Input BLF AC DC AC DC 14VA 3.96W 0.56 0.34 14VA 4.73W 0.46 0.34 16VA 5.2W 0.58 0.53 16VA 5.2W 0.44 0.40 18VA 6.3W 0.80 0.60

110 Volt AC/DC PV290 19290 Power Input BLF AC DC AC 15VA 4.6W 0.50 1VA 5.2W 0.65 17VA 5.6W 0.85 18VA 5.9W 0.62 20VA 6.9W 0.70

DC 0.43 0.51 0.71 0.49 0.57

No Relay Canned Unit PCB Version

9W TC-S 11W TC-S 13W TC-D, TC-T 16W 2D 14W T5 18W TC-D, TC-L 18/20W T8

24 Volt AC/DC PV190 19720 Power Input BLF AC DC AC DC 20VA 11W 0.60 0.40 22VA 13W 0.40 0.31 21VA 13W 0.51 0.41 22VA 16W 0.42 0.32 22VA 15W 0.50 0.45 20VA 13W 0.49 0.40 21VA 14W 0.29 0.19

50 Volt AC/DC PV191 19721 Power Input BLF AC DC AC DC 23VA 11W 0.54 0.45 29VA 14W 0.49 0.41 30VA 15W 0.54 0.44 32VA 16W 0.49 0.38 31VA 16W 0.50 0.41 28VA 14W 0.37 0.31 33VA 17W 0.35 0.29

110 Volt AC/DC PV192 19722 Power Input BLF AC DC AC 26VA 9W 0.51 32VA 11W 0.49 31VA 11W 0.61 33VA 12W 0.49 35VA 13W 0.49 32VA 12W 0.41 35VA 13W 0.27

DC 0.42 0.41 0.48 0.35 0.39 0.37 0.21

84

orbik THE LIGHTING SPECIALISTS

Inverters for use with central systems

Incorporating mains holdoff Relay

7W TC-S 8W T5 9W TC-S 11W TC-S 13W T5 14W T5 16W 2D 18W/20W T8 18W TC-D 21W T5 22W T5 Circular 24W TC-L 26W TC-D 28W 2D T5 28W T5 32W TC-T 35W T5 36W TC-L 36W T8 38W 2D T5 39W T5 40W T5 Circular 40W TC-L 42W TC-T 49W T5 54W T5 55W T5 Circular 55W 2D 55W TC-L 58W T8 70W T8 80W T5 100W T12

visit: www.orbik.co.uk

24 Volt AC/DC PVR24 Power Input BLF AC DC AC DC 15VA 7W 0.38 0.28 15VA 7W 0.45 0.56 15VA 8W 0.42 0.35 16VA 8W 0.40 0.29 16VA 8W 0.62 0.48 16VA 9W 0.36 0.27 17VA 9W 0.45 0.38 18VA 8W 0.20 0.14 19VA 9W 0.31 0.24 19VA 10W 0.32 0.24 19VA 10W 0.28 0.25 19VA 9W 0.25 0.20 20VA 11W 0.24 0.18 19VA 9W 0.24 0.19 22VA 12W 0.31 0.23 21VA 12W 0.37 0.28 25VA 14W 0.31 0.23 22VA 11W 0.22 0.16 21VA 11W 0.17 0.14 19VA 11W 0.16 0.13 22VA 12W 0.15 0.12 24VA 13W 0.30 0.23 24VA 13W 0.29 0.21 23VA 13W 0.23 0.13 26VA 15W 0.29 0.22 27VA 15W 0.18 0.14 26VA 14W 0.25 0.20 23VA 12W 0.17 0.13 26VA 14W 0.22 0.18 24VA 13W 0.13 0.11 27VA 15W 0.12 0.09 30VA 17W 0.17 0.14 27VA 14W 0.09 0.06

50 Volt AC/DC PVR50 Power Input BLF AC DC AC DC 18VA 7W 0.47 0.35 19VA 8W 0.60 0.45 19VA 8W 0.58 0.48 20VA 8W 0.55 0.43 20VA 8W 0.64 0.50 21VA 9W 0.50 0.36 21VA 9W 0.60 0.46 21VA 8W 0.24 0.20 23VA 10W 0.45 0.35 24VA 11W 0.44 0.34 26VA 11W 0.40 0.33 21VA 9W 0.43 0.28 27VA 11W 0.35 0.22 27VA 11W 0.36 0.27 31VA 13W 0.46 0.35 28VA 12W 0.51 0.40 36VA 16W 0.45 0.33 26VA 11W 0.30 0.25 27VA 11W 0.27 0.20 27VA 11W 0.24 0.19 30VA 13W 0.24 0.18 33VA 14W 0.45 0.35 30VA 13W 0.39 0.28 32VA 14W 0.39 0.24 37VA 17W 0.44 0.28 36VA 16W 0.26 0.20 35VA 15W 0.39 0.29 30VA 12W 0.26 0.19 32VA 13W 0.31 0.24 34VA 14W 0.29 0.22 38VA 16W 0.10 0.08 41VA 19W 0.28 0.22 37VA 16W 0.15 0.10

110 Volt AC/DC PVR110 Power Input BLF AC DC AC 20VA 8W 0.53 21VA 9W 0.57 21VA 9W 0.58 22VA 9W 0.61 22VA 9W 0.58 23VA 9W 0.42 23VA 9W 0.56 23VA 9W 0.24 24VA 10W 0.42 25VA 11W 0.40 26VA 11W 0.38 24VA 10W 0.36 26VA 11W 0.30 25VA 11W 0.33 30VA 13W 0.42 29VA 12W 0.49 34VA 15W 0.41 29VA 12W 0.29 28VA 11W 0.22 30VA 13W 0.23 30VA 13W 0.22 30VA 13W 0.43 31VA 14W 0.36 32VA 13W 0.36 35VA 16W 0.33 35VA 16W 0.24 33VA 15W 0.33 30VA 13W 0.21 33VA 15W 0.30 33VA 14W 0.22 36VA 17W 0.10 39VA 19W 0.25 35VA 16W 0.13

DC 0.40 0.43 0.46 0.49 0.46 0.33 0.44 0.18 0.32 0.32 0.30 0.25 0.25 0.24 0.35 0.38 0.34 0.21 0.18 0.17 0.17 0.34 0.28 0.24 0.26 0.20 0.27 0.17 0.25 0.18 0.08 0.21 0.11

85

Central systems

Central Battery and Inverter Systems

We supply a wide range of AC/DC and AC/AC central systems We supply a wide range of DC Central Battery Systems designed to meet customer requirements and compliant with EN50171. Central Battery Systems often have the following advantages over self-contained emergency luminaires: The Central Battery Cubicle allows easier maintenance, monitoring, control and battery replacement when necessary.

• With the wide range of battery types and sizes available the design life of the system and the duration of discharge can be more easily tailored to suit individual applications.

• The luminaires are remote from their emergency power supply so they can be located in areas where high ambient temperatures are present.

Low Power DC Systems

Low Power Systems Wall mounting 24V low power systems using 10-year design life valve regulated lead acid batteries. Table below shows our standard range.

Model

15/24 24/24 38/24 48/24 65/24 Cabinet style A B C D

Rating in Watts 1 Hour version 3 Hour version 195 86 313 138 495 218 620 275 720 373 Height 500 mm 600 mm 700 mm 800 mm

Width 400 mm 500 mm 500 mm 600 mm

Cabinet style A B B C D Depth 200 mm 250 mm 250 mm 250 mm

Typical Order Code: 38/24/M3/218/S - is a 24 Volt 3-Hour Maintained unit giving 218 Watts sealed lead acid batteries but without Amp or Voltmeters

High Power DC Systems Features: • Lockable lift off covers for easy installation and maintenance • Separate battery and gear compartments • Recessed instrument panel • A wide range of optional extras • Finish epoxy powder RAL 7032 • Maintained and Non-Maintained options • Dual output option for system flexibility • Flexible manufacturing facility allows maximum customer specific options

Options : M = Maintained NM = Non Maintained AV = Amp and Voltmeter LV = Low voltage cut-off S = Sealed lead acid batteries

High Power Systems Floor standing high power systems using 10-year design life valve regulated lead acid batteries. Table below shows our standard range Voltage

1 Hour 24 340

480

750

1050

1350

1550

1925 50 680

960

1500

2100

2700

3150

3850

4700 110 1500

2150

3350

4800

6100

7150

8700 Cabinet style 1 2 3 4

Rating in Watts 2 Hour 3 Hour 195 135 280 190 430 300 610 420 790 545 925 635 1120 780 390 270 560 380 860 600 1220 840 1580 1090 1850 1270 2250 1560 2800 1960 890 610 1250 870 1950 1350 2750 1900 3550 2450 4150 2850 5050 3500

Height 1000 mm 1250 mm 1250 mm 1250 mm

Width 600 mm 800 mm 1000 mm 1050 mm

Cabinet style 1 1 1 1 1 1 1 1 1 1 1 2 2 2 3 2 2 2 3 3 4 4 Depth 440 mm 540 mm 640 mm 700 mm

Typical Ordering Code: 50/NM3/600/AV/LV/S - is a 50 Volt, 3-Hour Non-Maintained unit supplying a 600 Watt load with Ammeter and Voltmeter and Low Voltage cut-off and sealed lead acid batteries

86

orbik THE LIGHTING SPECIALISTS

Central systems

AC Systems

ORBIK’s range of Static Systems are built in accordance with BS EN50171 and are divided into two categories, LPAC (low power AC) and HPAC (high power AC). The LPAC system is offered with a range of power outputs from 150VA to 1500VA with the HPAC systems ranging from 2kVA to 200kVA a nd all systems are Sinewave output to ensure compatibility with most lighting loads. Both system types come with Volt Free Contacts for remote monitoring and a Fire Test Input is included for integration with the building fire alarm and systems as standard and can be supplied for 1 or 3 hour duration with other autonomies available on request. The battery is monitored during the Battery Test and if the battery discharges faster than predicted then an alarm is raised. The system achieves this by comparing the actual discharge current against a typical discharge curve. This test provides an early warning of battery failure, which is a critical feature for an emergency system. Deep Battery Discharge Protection, Battery Disconnection protection and Reverse Battery Polarity Protection are also included as standard.

LPAC The LPAC is a single-phase system designed smaller installations or for floor by floor installations. Load monitoring is supplied as standard and is a cost effective alternative to addressable systems. The LPAC is configured for passive standby (inverter normally off) for maximum efficiency. The inverter output is directed through 4 independent changeover relays, each of these relays has a separate mains input, which can be configured to allow a non-maintained, maintained or switched output. Each output is individually protected against short circuit by fuses effectively providing 4-way distribution to the luminaires, in addition to providing load discrimination. Each output is individually monitored for load change, earth leakage and overload.

Load Monitoring: During the Auto Test (weekly), the system monitors the load on each of the 4 output lines. If the system detects that the load on any of the 4 output lines has changed by more than 10VA (3VA for LED loads) from the load recorded during commissioning, an alarm condition will occur and details of the load change will be displayed e.g. ‘Line 1- 20VA Change’.

Datalogging as described below is an optional feature for the LPAC range.

HPAC The HPAC has been designed for larger installations and is available with single-phase input/ output for systems up to 20kVA and three-phase input/output for systems ranging from 10kVA to 200kVA. Systems can be configured for passive or active standby depending on the application. HPAC systems can be supplied with static switch changeover (in place of a contactor) resulting in a no-break changeover making the HPAC suitable for high-pressure discharge lighting schemes. HPAC is specifically designed for lighting loads and has the capability to clear a load faults (up to 1/3rd output rating ‘C’ type MCB) whilst maintaining full load.

Datalogging is a standard feature on the HPAC range and stores records of alarms and test results in an internal non-volatile memory.

LPAC Cat No

Rating VA/W

LPAC10/#

150/120

LPAC20/#

300/240

LPAC30/#

450/360

LPAC40/#

600/480

LPAC50/#

750/600

LPAC60/#

950/750

LPAC80/#

1250/1000

LPAC100/#

1500/1200

• # 1 or 3 hour • Larger systems available on request • 3 Phase input/single phase output also available.

visit: www.orbik.co.uk

HPAC (Single Phase)

HPAC (Three Phase)

Cat No

Phase Input/ Output

Rating kVA/kW

Cat No

Phase Input/ Output

Rating kVA/kW

HPAC2.0/1/1/#

1/1

2.0/1.7

HPAC10/3/3/#

3/3

10.0/8.5

HPAC2.5/1/1/#

1/1

2.5/2.1

HPAC15/3/3/#

3/3

15.0/12.75

HPAC3.2/1/1/#

1/1

3.2/2.7

HPAC20/3/3/#

3/3

20.0/17.0

HPAC4.8/1/1/#

1/1

4.8/4.1

HPAC30/3/3/#

3/3

30.0/25.5

HPAC5.6/1/1/#

1/1

5.6/4.8

HPAC40/3/3/#

3/3

40.0/34.0

HPAC6.0/1/1/#

1/1

6.0/5.1

HPAC50/3/3/#

3/3

50.0/42.5

HPAC8.0/1/1/#

1/1

8.0/6.8

HPAC60/3/3/#

3/3

60.0/51.0

HPAC10/1/1/#

1/1

10.0/8.5

HPAC80/3/3/#

3/3

80.0/68.0

HPAC12/1/1/#

1/1

12.0/10.2

HPAC100/3/3/#

3/3

100.0/85.0

HPAC14/1/1/#

1/1

14.0/11.9

HPAC120/3/3/#

3/3

120.0/102.0

HPAC16/1/1/#

1/1

16.0/13.6

HPAC150/3/3/#

3/3

150.0/127.5

HPAC20/1/1/#

1/1

20.0/17.0

HPAC200/3/3/#

3/3

200.0/170.0

87

Central systems

Mini-Sine

A mini static inverter emergency lighting unit for loads up to 150 watts Orbik low power compact Mini-Sine is a Mini Static inverter system designed to operated loads upto 150W at 230V. This popular unit is available in 2 versions, either for 1 or 3 hour duration on mains failure.

A purpose designed lead acid charger provides a float voltage of 27V within a tolerance of 1% with a sustainable charge current of 5A and over current protection. The charger is short circuit and battery reversal protected with the addition of thermal shutdown protection.

Addition cooling for the charger during early charging stages is provided by a quiet chassis mounted fan.

A high efficiency soft start modified sine wave inverter provides the emergency back up making it suitable for inductive loads. Output is 230V ¹ 10% 50Hz ¹ 1%. It is able to provide continues loading up to 150W and includes overload protection. The sine wave inverter includes over temperature and short circuit protection and is suitable for operation in an ambient of up to 30°c.

The front panel provides a number of indictors displaying healthy supply, power failure battery disconnect/charger failure and over a charge indicator that extinguishes when the charge current falls below 1 Amp. Additional fault monitoring is provided via a set of volt free contacts allowing for remote monitoring of the Mini-Sine.

Mini-Sine is supplied with Lead Acid Batteries which are housed within its robust high quality steel enclosure that is supplied in a white finish.

Mini-Sine has advantages compared to selfcontained systems for emergency lighting which include lower maintenance being a central unit, mains luminaires can be used with higher light outputs compared to conventional emergency luminaires which typically produce lower ballast lumen factors. Also with integral batteries the Mini Sine can operate luminaires which maybe placed in environments unsuitable for batteries due to extreme heat or cold.

Mini Sine has also been successfully utilised to operate with certain discharge luminaires. Please contact our technical department for assistance.

Ordering Codes Cat No MS150/1 MS150/3

Description 150W 1 Hour Static Inverter Emergency Lighting Unit 150W 3 Hour Static Inverter Emergency Lighting Unit

Batteries 2x12V 12Ah 2x12V 25Ah

Dimensions: 375mm x 440mm x 160mm Weight: 21Kg (MS150/1 including batteries) 30Kg (MS150/3 including batteries)

88

orbik THE LIGHTING SPECIALISTS

Complete reassurance.

Addressable emergency lighting systems

PALS™

Addressable Emergency Lighting Regular testing and maintenance of emergency lighting systems is essential and is now a legal requirement in many countries. It is possible to carry out testing manually but this can be expensive and time consuming and accurate record keeping difficult to arrange. PALS is a Programmable Addressable Lighting System that will automatically test and monitor the emergency lighting system and produce accurate reports of test results and system events.

It ensures building owners and occupiers are informed promptly of any problems effecting the emergency lighting system and as the system can be networked and remotely accessed, off-site monitoring also becomes an option.

Key features include: • Each PALS panel is fully expandable from 1 to 5 loops using plug-in line drivers • To allow for future expansion, specify 100 devices per driver (Maximum 126) can be supported by each line driver card allowing one panel to monitor and test 630 devices • A total of 95 PALS panels can then be networked to allow a total system size of 59,850 devices • A range of interface units allow the system to operate with most types of emergency luminaires including self-contained, central battery and static inverter systems • User friendly software with auto device learn and data loop status for trouble free settingup, commissioning and fault finding • Constant communication with luminaires to prove system integrity • Reports charger or mains supply failure within 60 seconds of the event • Loops, zones and luminaires can be disabled to carry out maintenance work • Carries out daily, weekly, quarterly and annual tests – fully automatically - or to customers requirements • Full system and luminaires test can be manually activated at any time • Reports luminaire number, location and nature of the fault detected • On-board power supplies on the panel to maintain memory if power fails • Designed to fail safe whatever event occurs • Easy to use, tab style questions for programming and operating, On-board alpha numeric keyboard for easy updates and modifications • External printer available • Multi panel networking, modem communications and PC report and control • Complies with the requirements of EN62034

Specifications PALS™ Control Panel OEL-CA1 Dimensions: Height 350 x width 340 x depth 115mm Weight: 10 kg (ex. Batteries) Mains Supply: 230V 50Hz AC – other voltages are available Standby: Integral charger for 12V, 6Ah Sealed lead acid battery (battery not included) Warning output: 4 programmable short circuit protected monitored outputs 1 amp per output maximum, total current 2 amps Auxiliary relay: 2 programmable volt free change over outputs

Contacts rated at 5 amps 250V max. per relay Sensor circuit: 2 wire addressable loop Loop protection: Short circuit protection on-board (i.e. without isolators in loop).

Signalling Lines: 1 expandable to 5 via plug-in line driver circuits Devices per Line: up to 126 luminaires per line driver Controls: Alpha-numeric key pad Indicators: 20 Test zone LED’s and audible buzzer Display: 2 line by 40 characters backlit LCD

20 LED zone test indicators

20 LED zone fault indicators

10 LED system indicators

2 LED common fault indicators Communications: 1 x RS485 serial port (OEL-485 plug in module required)

1 x on-board RS232 port (OEL-004 lead assembly required) Recommended Cable: For signalling line circuits: Beldon 8762, 8760 or 8719 is recommended.

90

orbik THE LIGHTING SPECIALISTS

Addressable emergency lighting systems

PALS™

System schematic/PALS

Central Battery or Static Inverter

RS485 Network

Modem

Printer

Key From a single site to a global multi national, PALS puts you in complete control of your emergency lighting testing requirements.

Slave luminaires Modem

Self contained luminaires (require 230 VAC) Communication loop Remote communication Computer

visit: www.orbik.co.uk

91

Addressable emergency lighting systems

PALS™

Self-contained interface units (OEL-302) monitor and test for: • Unswitched mains supply present at all times • Battery connected and charging • Light output from the lamp in emergency operation (PALS monitors the actual lamp light output as current monitoring can be unreliable) • Data loop integrity at all times Central battery system interface units (OEL-307) monitor and test for: • Data loop integrity at all times • Light output from the lamp in emergency operation

Dimensions: Depth 30 x width 50 x length 130 mm Weight: 80 grams Fixing Centres: 120mm

Cat No

Description

Function

OEL-CA1

PALS™ Control Panel

Each PALS™ panel requires at least one OEL-001 driver, with a maximum of 5

OEL-001

PALS™ Line Driver

To allow for future expansion, specify 100 devices per driver (Maximum 126)

OEL-003

9 Pin - 25 Pin D Type Cable

For serial printer connection

OEL-004

RS232 Cable and Gland

Internal cable and gland for local printer and RS232 panel communications

OEL-006

Modem Cabling Kit

Requires OEL-485 and OEL-009 (PC Net 002 software)

OEL-008

PC-Net 001 Upload Software

To allow easy on-site description and test changes via external computer

OEL-009

PC-Net 002 Light Logger Software

Allows full off-site system monitoring and testing facilities

OEL-010

RS232 Cable to Centronics

For parallel printer connection

OEL-108

RS232-RS485 Converter

Converter for use with local RS232 printers

OEL-301

240V AC Current Sensor Interface

Used to detect the current into mains luminaires

OEL-302

Lighting Interface

One required for each maintained/non-maintained luminaire, monitors charge, mains and light

OEL-304/20

12 Volt 20W Tungsten Interface

Monitors the current in 10W and 20W non-maintained Tungsten luminaires

OEL-304/40

12 Volt 50W Tungsten Interface

Monitors the current in 20W and 50W non-maintained Tungsten luminaires

OEL-305

Central System Interface

One addressable relay required for each static inverter or central battery unit

OEL-307

Light Sensor Interface

Monitors only the lamp light output , one required for each luminaire on central systems

OEL-485

RS485 Network Card

One required for each panel for local and modem networking of PALS™ panels

16-508

12 Volt 6Ah Sealed Lead Acid Battery

Must be installed in each PALS™ control panel

LED-INT

Interface for 4 V LED circuits from 1 to 5 W and 6V 10W tungsten lamps.

92

orbik THE LIGHTING SPECIALISTS

Digital self testing systems

A unique fully automatic self testing module (3 hour only)

DST™

The Digital Self-Test Adapter, DST™, is a unique, fully automatic, independent, selftesting module that complies with the requirements of BS5266 and the forthcoming International Standard for automatic testing devices, IEC62034 and unlike many is suitable for incorporation into virtually any Nickel Cadmium, Nickel Metal Hydride VRLA. Battery powered, self contained emergency lighting luminaire.

The DST™ is flexible and can be specified to be included in virtually all self contained luminaires and conversion kits and is ideally suited to retrofitting.

The DST™ is thorough and carries out the monthly, six monthly and yearly test regime contained within BS 5266 without need for manual intervention. When the unit detects a fault condition it provides both a visual and an audible alarm indication (if not required, the audible alarm can be simply disabled when the DST is commissioned).

DST™ is reliable and even when it has failed its associated luminaire for duration or light output discrepancies, it will still allow the luminaire to operate to the best of its ability in its emergency mode.

Additionally, the DST™ has a non-volatile memory so if the power fails the clock is suspended but the test sequence remains unaltered. When the mains power is restored they simply carry on from the point at which power failed.

On initial power up the DST’s intelligence allows it to enter a battery pre-conditioning mode to ensure the batteries are in a suitable condition to supply sufficient power for emergency operation. Testing, initiation and clock resetting are carried out via a single discrete push button.

Performance DST™ Standard Testing programme conforms to the requirements of BS5266-1 Monthly: 1 minute, functional test 6 Monthly: 1 hour, duration test Annually: 3 hour, full rated duration test

Dimensions: Height 30mm x Length 130mm x Width 50mm, Fixing centres: 120mm, Weight: 80 grams.

DST™ LED Status Reports are made via a single tri-colour LED. Continuous GREEN LED: Mains, battery, charger and previous test correct Continuous RED LED: Test in progress Flashing AMBER LED: Test fail alarm * (With optional sound alarm) LED off: Mains failure or battery faulty *If a fault is detected the sounder will enter a cycle where it emits an optional audible alarm, it will then sound every 10 seconds until 4 hours have elapsed and if during this time it has not been reset or the test reinitiated the sound alarm will repeat the alarm cycle. A single bleep only will be emitted during manually initiated tests.

Ordering Codes DST – 2 cell

Suitable for all modules using 2 Cell Batteries

DST – 3 cell

Suitable for all modules using 3 Cell Batteries

DST – 4 cell

Suitable for all modules using 4 Cell Batteries

DST – 5 cell

Suitable for all modules using 5 Cell Batteries

DST – 6 cell

Suitable for all modules using 6 Cell Batteries

DST – 8 cell

Suitable for all modules using 8 Cell Batteries

DST – 10 cell

Suitable for all modules using 10 Cell Batteries

DSTT – 12 V

Suitable for Tungsten Lamps using 12V VRLA Batteries

LED–INT

Interface for 4 volt LED circuits from 1 to 5 watts and 6V 10W tungsten lamps.

visit: www.orbik.co.uk

93

Electronically controlled emergency lighting

Test Switch

This innovative test switch enables manual testing Simple to install and use, this innovative test switch enables manual testing of emergency lighting to current UK and European standards.

There are requirements for all building occupiers and operators to test their emergency lighting on a regular basis. The ELTS switch enables the short monthly test (10 minutes), the six monthly 1 hour test and the annual 3 hour test to be carried out by one person who, having operated the switch, is then free to inspect the emergency lights for correct operation. At the end of the selected test period, the mains is automatically re-instated.

ELTS is a cost effective solution for meeting testing requirements and is installed in the unswitched supply to the emergency lights.

Ordering Codes Cat No

Description

ELTS

Emergency Lighting Test Switch

ELT/R5

5 Channel Relay Box

ELT/R10

10 Channel Relay Box

ELT/R15

15 Channel Relay Box

ELT/R20

20 Channel Relay Box

53

P

Pescara - G

Large exit sign with a 90 metre viewing distance

94

orbik THE LIGHTING SPECIALISTS

INTRODUCTION

Conditions of Sale

Conditions of Sale 1. GENERAL (a) In these General Conditions of Sale (the “Conditions”), the “Company” means Orbik Electronics Limited, the “goods” means any item of whatsoever nature which is to be supplied to the Purchaser by the Company in accordance with these Conditions, including any instalment or parts of the goods and the “Purchaser” means the person, firm or company who purchases or agrees to purchase the goods from the Company. (b) These Conditions shall apply to and form part of every contract of sale entered into by the Company. The Company shall sell and the Purchaser shall purchase the goods in accordance with the Company’s written quotation (if accepted by the Purchaser) or the Purchaser’s written order (if accepted by the Company), subject in either case to these Conditions, which shall govern the contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted, or any such order is made or purported to be made by the Purchaser. (c) No variation of these Conditions shall be binding unless agreed in writing between the authorised representatives of the Purchaser and the Company.

2. LIMITS OF CONTRACT (a) No order submitted by the Purchaser shall be deemed to be accepted by the Company until a written acknowledgment of order is issued by the Company or (if earlier) the Company delivers the goods to the Purchaser. (b) Any quotation is given by the Company on the basis that no contract will come into existence until the Company dispatches an acknowledgement of order to the Purchaser. (c) The Purchaser shall be responsible to the Company for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the Purchaser, and for giving the Company any necessary information relating to the goods within a sufficient time to enable the Company to perform the contract in accordance with its terms. (d) The quantity, quality and description of the goods and any specification for them shall be as set out in the Company’s quotation (if accepted by the Purchaser) or the Purchaser’s order (if accepted by the Company).

3. PRICES (a) The price payable for goods shall unless otherwise stated by the Company in writing be the Company’s quoted price or, where no price has been quoted (or a quoted price is no longer valid), the list price of the Company current at the date of delivery or deemed delivery and in the case of an order for delivery by instalments the price payable for each instalment shall be the Company’s quoted price or, where no price has been quoted (or a quoted price is no longer valid), the list price of the Company current at the date of delivery of such instalment. Any prices quoted by the Company are valid for a period of 30 days only from the date of the quotation or until earlier acceptance by the Purchaser, provided that such prices have not previously been withdrawn by the Company, after which time they may be altered by the Company without giving notice to the Purchaser. (b) Unless otherwise expressly stated to be firm for a period the Company’s prices are subject to variation to take account of any increase in the cost to the Company which is due to any factor beyond the reasonable control of the Company (such as, without limitation, significant increases in the costs of labour, materials and other costs of manufacture) calculated by using the British Electrotechnical & Allied Manufacturers Association (“BEAMA”) contract price adjustment clause and formulae. The Company reserves the right, by giving written notice to the Purchaser at any time before delivery, to increase the price of the goods accordingly. (c) The Company also reserves the right, by giving written notice to the Purchaser at any time before delivery, to increase the price of the goods to reflect any increase in costs to the Company arising from any delay caused by any instructions of the Purchaser or any failure of the Purchaser to give the Company adequate information or instructions. (d) The price for the goods shall be exclusive of value added tax and this will be charged at the applicable rate and recoverable by the Company in addition to the price. (e) All invoiced price discrepancies must be notified by the Purchaser to the Company within 7 days of the date of invoice.

4. PAYMENT (a) Unless otherwise agreed in writing between the Purchaser and the Company, the Company may invoice the Purchaser for the price of goods on or at any time after delivery of the goods, unless the goods are to be collected by the Purchaser or the Purchaser wrongfully fails to take delivery of the goods, in which event the Company shall be entitled to invoice the Purchaser for the price at any time after the Company has notified the Purchaser that the goods are ready for collection or (as the case may be) the Company has tendered delivery of the goods.

Unless otherwise agreed in writing, payment of the full price for the goods is due on or before the last working day of the month following the date of the invoice. (c) Time for payment of the price shall be of the essence of the contract. Receipts for payment will only be issued on request. (d) All payments payable to the Company under the contract shall become due immediately upon termination of the contract, despite any other provision of these Conditions. (e) Without prejudice to any other rights it may have, if the Purchaser fails to make any payment when due in accordance with these Conditions, the Purchaser will be liable to pay interest to the Company on such sum from the due date for payment at the annual rate of 2% above the base rate of HSBC Bank PLC from time to time, accruing on a daily basis until payment is made, whether before or after any judgment. The Company also reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998. (f) Additionally and without prejudice to its other rights the Company shall be entitled to recover all direct expenses reasonably incurred by the Company in collecting or attempting to collect amounts of the price outstanding. (g) If the Purchaser fails to make any payment when due in accordance with these Conditions, the Company reserves the right in its absolute discretion and without prejudice to any of its other rights or remedies to suspend all further deliveries until such payment has been made in full together with any other amounts owing to the Company whether the due date for payment has been reached or not, if so requested by the Company or, at the Company’s option, to cancel the balance of the order. In either case the Company shall hold the Purchaser liable for costs incurred in respect of goods in course of manufacture or ready for dispatch. (h) The Company shall be entitled to bring an action for the price or part thereof whether or not delivery or deemed delivery has taken place and whether or not the property in the goods has passed.

5. PAYMENT DISPUTES AND DEBIT NOTES (a) If the Purchaser operates a debit note system, debit notes will only be accepted by the Company if raised in respect of the following matters and otherwise in accordance with the provisions of this Condition 5: (i) incorrect goods supplied, subject to the provisions of Condition 2; (ii) pricing discrepancies, subject to the provisions of Condition 3; (iii) delivery shortages, subject to the provisions of Condition 6; (iv) non-delivery, subject to the provisions of Condition 8; (v) damaged goods, subject to the provisions of Conditions 8 and 13; (vi) faulty goods, subject to the provisions of Condition 13, and provided that if goods returned by the Purchaser have not been opened by the Purchaser, they will be returned to the Purchaser and no credit note will be issued by the Company; or (vii) cancellation, subject to the provision of Condition 15, and provided that in each case, written evidence of the Company’s consent to such cancellation is attached to the relevant debit note. (b) All requests to return goods to the Company must be agreed in writing by the Company before any debit note is raised by the Purchaser. (c) Debit notes will only be accepted by the Company if: (i) they include details of the Company’s invoice to which they relate; (ii) they are received by the Company within 7 days of the date on which the invoice is due for payment by the Purchaser; (iii) they are notified to the Company on the day that they are raised; and (iv) they relate to the value of goods in dispute and not the value of the whole invoice (except where the value of the whole invoice is in dispute). (d) In no circumstances will debit notes be accepted by the Company in relation to invoices which have either been subject to a prompt payment discount or which are the subject of a dispute raised by the Purchaser more than 5 days after the date on which the invoice is due for payment by the Purchaser.

6. DELIVERY (a) Delivery of the goods shall be made by the Purchaser collecting the goods at the Company’s premises within 14 days of the Company giving notice to the Purchaser that the goods are ready for collection or, if some other place for delivery is agreed by the Company, by the Company delivering goods to that place. (b) Unless accepted by the Company in writing, all times or dates quoted for delivery of the goods are given in good faith but are approximate only and time for delivery shall not be of the essence of the contract. If no dates are so specified, delivery will be within a reasonable time. The goods may be delivered by the Company in advance of the quoted delivery date on giving reasonable notice to the Purchaser. (c) All times or dates for delivery shall be calculated from the date of acceptance by the Company of the order of the Purchaser, or from the date of receipt by the Company from the Purchaser of all information, instructions and drawings as shall be necessary to enable the Company to carry out the order, whichever shall be the later. (d) If the Company delivers to the Purchaser a quantity of goods of up to 5% more or less than the quantity ordered, the Purchaser shall not be entitled to object to or reject the goods or any of them by reason of the surplus or shortfall and shall pay for such goods at the pro rata contract rate. (e) Unless otherwise stated in writing, the Company shall be entitled to make partial deliveries of the goods (delivery by instalments), provided that where goods are delivered in instalments, each delivery shall constitute a separate contract and failure by the Company to deliver any one or more of the instalments in accordance with these Conditions or any claim by the Purchaser in respect of any one or more instalments shall not entitle the Purchaser to treat the contract as a whole as repudiated. (f) Any contract shall be subject to the Company being satisfied as to the Purchaser’s credit references, and without prejudice to the generality of the foregoing, the Company may (in its absolute discretion), having informed the Purchaser that the goods are ready for dispatch, and notwithstanding any other provision of these Conditions, refrain from delivering the goods until such time as the Purchaser tenders the purchase money to the Company together with any outstanding amounts which may be due to the Company on any account whatsoever.

All ORBIK’s emergency luminaires are designed to operate in an ambient temperature of 25ºC, unless otherwise stated, and are fully compliant with EN60598.2.22 1999 and EN55015. Many of our emergency luminaires and modules are subject to ongoing surveillance testing by BSI and are covered by our kit mark licence KM31508.

Commitment to Quality

7. PACKING AND CARRIAGE (a) The costs of crates, cases, pallets, stillages, skids or other such returnable packing will be charged to the Purchaser in addition to the price of the goods. Unless otherwise specified, full credit will be given to the Purchaser provided such packaging is returned, undamaged, to the Company (carriage paid), before the Purchaser’s due payment date. No charge will be made by the Company by any other form of packaging and no credit will be allowed for its return. (b) Where the value of any order exceeds £500.00 the cost of delivery of the goods to the Purchaser’s premises on the mainland of Great Britain shall be included in the contract price. In all other cases, contract prices are exclusive of carriage and insurance to the Purchaser’s premises.

8. NON-DELIVERY OR DAMAGE IN TRANSIT (a) The quantity of any consignment of goods as recorded by the Company upon dispatch from the Company’s place of business shall be conclusive evidence of the quantity received by the Purchaser on delivery unless the Purchaser can provide conclusive proof to the contrary. (b) The Company shall not be liable for any non-delivery of goods unless written notice is given to the Company within 7 days of the date when the goods would in the ordinary course of events have been received. (c) Any liability of the Company for non-delivery of the goods shall be limited to replacing the goods within a reasonable time or issuing a credit note at the prorata contract rate against any invoice raised for such goods. (d) If the Purchaser fails to take delivery of the goods when they are ready for collection or the Company is unable to deliver the goods on time because the Purchaser has not provided appropriate delivery instructions, licences or authorisations, then, without limiting any other right or remedy available to the Company, the goods will be deemed to have been delivered and the Company may: (i) store the goods at the Company’s own premises or elsewhere on the Purchaser’s behalf until actual delivery and charge the Purchaser for the reasonable costs (including insurance) of storage; or (ii) sell the goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Purchaser for the excess over the price under the contract or charge the Purchaser for any shortfall below the price under the contract. (e) When the price quoted includes delivery, the Company shall repair or replace free of charge goods damaged in transit provided that the Company is given written notification of such damage within 7 days of the date when the goods would in the ordinary course of events have been received. (f) Subject to the provisions of Conditions 6 and 8, the Company will only consider claims for alleged shortage if they are received within 7 days of the receipt of the goods by the Purchaser together with sufficient information to enable the Company properly to identify the shortage including the Purchaser’s Advice Note number, case number and condition of case. Where goods are collected by the Purchaser, no claim for shortage or damage will be considered.

9. SAMPLES The Company shall provide samples of goods to the Purchaser on request. Samples will be charged for under the Company’s normal terms. With the prior written agreement of the Company, samples may be returned to the Company and provided they are returned in good condition (in the reasonable opinion of the Company), the Purchaser will be credited in full for such samples.

10. VARIATIONS (a) The Company shall be under no obligation to alter or vary any part of the contract or any work connected therewith. Any alteration to or addition to or amendment or other variation of the specification, including any increase or decrease in the quantity of the goods or any alteration to any drawings or to the quality, performance, weight or measurements of any goods or any alteration or variation of advised delivery schedules, shall, if requested by the Purchaser, be subject to the agreement of the Company, with such alteration or addition to the price and to delivery dates or schedules as may be required by the Company, and shall not be binding upon the Company unless and until accepted by the Company in writing. (b) In the event of any variation or suspension of the work by the Purchaser’s instructions or lack of instructions the Company shall be entitled to adjust the contract price to reflect any additional costs incurred, and to adjust delivery dates or schedules.

11. PERFORMANCE, INSPECTION AND TESTS (a) Any data, technical information or performance figures provided by the Company are based on tests performed under standard conditions at the Company’s premises. They are believed to be accurate but cannot be guaranteed under different conditions. (b) The Company’s products are carefully inspected, and, where practicable, submitted to its standard tests at the Company’s place of business before dispatch. If tests other than those specified or tests in the presence of the Purchaser or its representatives are required, these will be charged for. In the event of any delay on the Purchaser’s part in attending tests after the Purchaser has received 7 days’ notice that the Company is ready to perform the tests, the tests will proceed in the Purchaser’s absence and the Purchaser accordingly hereby agrees to accept and pay for such tests as if they had been performed in the Purchaser’s presence.

12. DESCRIPTIVE MATTER AND ILLUSTRATIONS (a) All descriptions and illustrations and particulars of weights and dimensions issued by the Company in catalogues, price lists, advertising matter and forwarding specifications are by way of general descriptions and approximate only, and shall not form part of any contract or give rise to any liability on the part of the Company. (b) It is the policy of the Company to endeavour to develop and improve its products, and accordingly the Company reserves the right to change all specifications without prior notification or public announcement pursuant to such policy, provided that nothing in this Condition 12 shall oblige the Purchaser to accept goods that do not reasonably comply with the contract.

13. WARRANTY (a) The Company will make good by repair, or at the Company’s option by the supply of a replacement, defects which, under proper storage and use appear in the goods within the period of twelve calendar months after the goods have been delivered and arise solely from faulty design (other than design made or furnished by the Purchaser), materials or workmanship. (b) The Warranty given in this clause is subject to the following provisos, namely:(i) that the Purchaser shall have followed all instructions issued by the Company in relation to the goods; (ii) that in the case of defects which would have been reasonably apparent to the Purchaser on reasonable examination of the goods on delivery, the Purchaser shall notify the Company of the defects in writing within fourteen working days of delivery; (iii) that in the case of any other defects, the Purchaser shall notify the Company of the defects in writing within seven working days of the date when the defect becomes apparent.

14. LIABILITY (a) Subject as expressly provided in these Conditions, and except where the goods are sold to a person dealing as a consumer (within the meaning of the Unfair Contract Terms Act 1977), all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. (b) A claim by the Purchaser which is based on any defect in the quality or condition of the goods or their failure to correspond with specification shall (whether or not delivery is refused by the Purchaser) be notified to the Company within 7 days from the date of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure. If delivery is not refused, and the Purchaser does not notify the Company accordingly, the Purchaser shall not be entitled to reject the goods and the Company shall have no liability for such defect or failure, and the Purchaser shall be bound to pay the price as if the goods had been delivered in accordance with the contract. (c) Where a valid claim in respect of any of the goods which is based on a defect in the quality or condition of the goods or their failure to meet specification is notified to the Company in accordance with these Conditions, the Company may, at its option, repair or replace the goods (or the part in question) free of charge, or at the Company’s sole discretion, refund to the Purchaser the price of the goods (or a proportionate part of the price), in which case the Company shall have no further liability to the Purchaser. (d) Except in respect of death or personal injury caused by the Company’s negligence, or liability for defective products under the Consumer Protection Act 1987, the Company shall not be liable whether in contract, tort or otherwise to the Purchaser by reason of any representation (unless fraudulent) or any warranty, condition or other term implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979), for any indirect, special, economic or consequential loss or damage (whether for loss of profit, loss of use, loss of production, loss of contract or otherwise) costs, expenses or other claims for compensation whatsoever (whether caused by the negligence of the Company, its employees or agents or otherwise) which arise out of or in connection with supply of the goods or their use or resale by the Purchaser.

15. REJECTION Unless otherwise agreed in writing, and subject to Condition 13 hereof, goods rejected as not complying with the contract must be rejected within 7 days of collection of the goods from the Company’s premises or if some other place for delivery is agreed by the Company, delivery to that place.

16. CANCELLATION (a) No order which has been accepted by the Company may be terminated by the Purchaser (whether by way of cancellation or otherwise) except with the prior written agreement of the Company (at the Company’s sole discretion) and on terms that the Purchaser shall indemnify the Company in full against all loss (including loss of profit), costs, damages, charges and expenses incurred by the Company as a result of the cancellation. (b) The provisions of Conditions 8(a) and 8(d) shall apply in relation to any goods which are the subject of a contract which is purportedly terminated by the Purchaser otherwise than in accordance with this Condition 15.

17. RETURN OF GOODS (a) Subject to Conditions 8 and 13 hereof, in no circumstances may goods supplied in accordance with a binding contract for sale be returned without the Purchaser first having applied for and obtained the written consent of the Company, provided that: (i) all goods returned must be in a resaleable condition, with undamaged cartons and must be in complete box quantities or minimum sales quantities; (ii) goods that are specialised or that have been modified in any way from standard will not be eligible to be returned; (iii) the Company will not collect goods from the Purchaser; and (iv) a handling charge (to cover the Company’s costs of restocking, transport and administration) will be deducted from any credit allowed by the Company; the handling charge will be calculated on the basis of 30% of the value of the returned goods, subject to a minimum handling charge in all cases of £100. (v) luminaires that are sold within the UK when it reaches the end of its useful life, may be returned for recycling, subject to our Conditions of Sale.

18. INTELLECTUAL PROPERTY (a) The Purchaser will indemnify the Company against all damages, penalties, costs, losses and expenses suffered by the Company, or for which it may become liable, in respect of the infringement of any intellectual property including (but without limitation) any patent, copyright, registered design, trade mark, trade name or knowhow arising out of the Company’s manufacture of goods or the application of any process to the goods in accordance with any specification, design, drawings or other data supplied by the Purchaser or its servants or agents. (b) All drawings descriptions and other information submitted by the Company, together with the copyright therein, shall remain the property of the Company.

19. FORCE MAJEURE The Company shall be entitled without liability on its part and without prejudice to its other rights, to terminate the contract or any unfulfilled part thereof or at its option to suspend or make partial deliveries or extend the time or times for delivery, if the manufacture of the goods by the Company or the Company’s suppliers, or the delivery of the goods or the performance by the Company of any of its obligations under the contract is hindered or delayed whether directly or indirectly by reason of the Purchaser failing to furnish necessary instructions or information, or by war or other hostilities, acts of terrorism, protests, riot, civil commotion, act of God, government action or legislation, interruption of transport, strike, fire, explosion, flood, epidemic lockout or other form of industrial action (including, without limitation, labour disputes with the Company’s or any subcontractor’s employees), accidents or stoppages to works, shortage of labour, materials, equipment, fuel or power, breakdown of machinery or any other cause whatsoever beyond the reasonable control of the Company or its subcontractors, whether or not such cause exists at the date of the order provided that if the event in question continues for a continuous period in excess of [90] days, the Purchaser shall be entitled to give notice in writing to the Company to terminate the contract.

20. PASSING OF PROPERTY AND RISK (a) Risk of damage to or loss of the goods shall pass to the Purchaser: (i) in the case of goods to be delivered at the Company’s premises, at the time when the Company notifies the Purchaser that the goods are available for collection; or (ii) in the case of goods to be delivered otherwise than at the Company’s premises, at the time of delivery, or, if the Purchaser wrongfully fails to take delivery of the goods, the time when the Company has tendered delivery of the goods. (b) Notwithstanding delivery and the passing of risk in the goods, or any other provision of these Conditions, the property in the goods shall not pass to the Purchaser until the Company has received in cash or cleared funds payment in full of the price of the goods and all other goods agreed to be sold by the Company to the Purchaser for which payment is then due. (c) Until such time as the property in the goods passes to the Purchaser, the Purchaser shall hold the goods as the Company’s fiduciary agent and bailee, and shall keep the goods separate from those of the Purchaser and third parties and properly stored, protected and insured and identified as the Company’s property, but shall be entitled to resell or use the goods in the ordinary course of its business. (d) Until such time as the property in the goods passes to the Purchaser (and provided the goods are still in existence and have not been resold), the Company shall be entitled at any time to require the Purchaser to deliver up the goods to the Company and, if the Purchaser fails to do so forthwith, to enter upon any premises of the Purchaser or any third party where the goods are stored and repossess the goods and the Purchaser grants to the Company and its agents and employees an irrevocable licence at any time to enter any premises where the goods are or may be stored in order to inspect them or, where the Purchaser’s right to possession has terminated, to recover them. (e) The Purchaser shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the goods which remain the property of the Company, but if the Purchaser does so all moneys owing by the Purchaser to the Company shall (without prejudice to any other right or remedy of the Company) forthwith become due and payable.

21. INSOLVENCY OF PURCHASER (a) This Condition applies if: (i) the Purchaser becomes insolvent or makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or (ii) an encumbrancer takes possession, or a receiver or administrative receiver is appointed, of any of the property or assets of the Purchaser; or (iii) the Purchaser ceases, or threatens to cease, to carry on business; or (iv) the Company reasonably apprehends that any of the events mentioned above is about to occur in relation to the Purchaser and notifies the Purchaser accordingly. (b) If this Condition applies: (i) without prejudice to any other right or remedy available to the Company, the Company shall be entitled to cancel the contract or suspend any further deliveries under the contract without any liability to the Purchaser, and if the goods have been delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary; and (ii) the Purchaser shall have a duty to immediately bring to the notice of any receiver, administrator or any such person or persons appointed the existence and content of Condition 19 of these Conditions (Passing of Property and Risk) and the rights of the Purchaser to use or trade on the Company’s goods shall immediately terminate and any such receiver, administrator or other person or persons appointed will not be entitled to use or to trade on the Company’s goods unless so authorised in writing by the Company.

22. ARBITRATION If at any time any question, dispute or difference whatsoever shall arise between the Purchaser and the Company upon or in relation to or in connection with the contract, either party may give the other notice in writing of the existence of such question, dispute or difference, and the same shall be referred to the arbitration of a person to be mutually agreed upon, or failing agreement within 30 days of receipt of such notice, of some person appointed by the President for the time being of the Chartered Institute of Arbitrators. A submission to arbitration under this Condition shall be deemed to be a submission to a sole arbitrator pursuant to the Arbitration Act 1996 or any statutory modification or re-enactment thereof. Any such arbitration shall be held in London, England.

23. GOVERNING LAW AND JURISDICTION (a) All contracts to which these Conditions apply shall be governed by and construed in accordance with English Law. (b) Subject to Condition 21 hereof, the Purchaser agrees to submit to the nonexclusive jurisdiction of the English courts.

24. MISCELLANEOUS (a) Each right or remedy of the Company under the contract is without prejudice to any other right or remedy of the Company whether under the contract or not. (b) A notice required or permitted to be given by either party to the other under these Conditions shall be in writing and addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving the notice. Notices shall be deemed to have been received (i) if sent by prepaid first class post, 2 days after posting; (ii) if delivered by hand on a working day prior to 4:00pm, on the day of delivery and otherwise on the next working day; (iii) if sent by facsimile on a working day prior to 4:00pm, at the time of transmission and otherwise on the next working day. (c) No waiver by the Company of any breach of the contract by the Purchaser shall be considered as a waiver of any subsequent breach of the same or any other provision. (d) If any provision of these Conditions is held by a court or other competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of the contract and the remainder of the provision in question shall not be affected.

April 2008

02

orbik THE LIGHTING SPECIALISTS

visit: www.orbik.co.uk

95

ORBIK

ORBIK UK Electrical Wholesalers: SPEL Lighting & Fire Detection ORBIK House, Northgate Way, Aldridge, Walsall, West Midlands, WS9 8TX United Kingdom.

Tel: 0870 516 8214 Fax: 0870 516 8591 Email: sales@spelonline.co.uk

ORBIK

Irish Sales: ELF (Emergency Lighting & Fire) Unit 8, Block K, Ballymount Industrial Estate, Ballymount Drive, Dublin 12.

Tel: 01 426 5792 01 426 5410 Fax: 01 426 5411 Email: sales@e-l-f.ie

Head Office & European Export: ORBIK Electronics Ltd ORBIK House, Northgate Way, Aldridge, Walsall, West Midlands, WS9 8TX United Kingdom.

Tel: +44 (0) 1922 743515 Fax: +44 (0) 1922 743173 Email: sales@orbik.co.uk www.orbik.co.uk

The Lighting Specialists

Export Sales Asia, Africa & Middle East: IMCI Tel: +44 161 257 2541 Fax: +44 161 225 8817 Email: xportsales@xportsales.com

The Lighting Specialists