TELEGRAM Loadmonitor - Series GAMMA Active power transducer with analogue output
G2BA480V12A 0..10V (Extension of G2BA480V12A 4..20mA) Art.No. 2390708 Available for order and deliverable now n n n n
True power monitoring in 1- or 3-phase mains Analogue output 0-10V Suitable for VFI (10 to 100Hz) Zoom voltage 24V to 240V DC and 48V to 240V AC
http://www.tele-online.com/medialibrary/datenblaetter/en_g2ba480V12a0-10v.pdf
Predecessor:
BW...DA5X/ BUT...A5X (if analogue output is used) n Loadmonitor - Series VOX
Functional description:
This true power monitoring system enables continuous monitoring and control of motors and drive systems via an analogue control signal. It converts the true power current value into a standard signal proportional to the load condition of the system being monitored. The analogue output signal of 0…10V can be adjusted across application dependent operating ranges and is connected to a control unit (e.g. SPS), directly to a frequency converter or a display unit. Additionally an LED bargraph indicates the measured true power.
Additional benefits:
Efficiency increase of the whole process through continuous control Higher accuracy through scalable output signal and adaption of operating area n Less storage costs through less type variety due to zoom voltage power supply n Preventative detection of invalid operating conditions through definable thresholds via SPS and consequently fully adjustable; whereas standard monitoring relays allow a maximum of only two adjustable thresholds n Lower installation and maintenance costs through partial replacement of sensors and mechanical safety appliances such as sliding clutches, torque sensors, limit switches and shear pins n n
Market segments:
Conveying and transportation equipment, pumps, compressors, fans, water purification, drainage facilities in quarries and mines, hydro electric power plants,...
TELE Haase Steuergeräte Ges.m.b.H • Vorarlberger Allee 38 • A-1230 Vienna • T: +43 (0) 1 614 74-0 • F: +43 (0) 1 614 74-100 • www.tele-online.com