37
2200 SERIES CONTINUED
TUBE WELD YOKE BORE 1 5/8˝ RD 1 5/8˝ RD 1 5/8˝ RD
(L) LENGTH 4 1/2˝ 4 1/2˝ 4 1/2˝
USE W/TUBE PART NUMBER FOR TUBE 70-2250 2 1/4˝ X .120 (11 GA) 70-2125 2 1/8˝ X .120 (11 GA) --- 2 1/8˝ X .083 (14 GA)
PART NUMBER 22-1343 22-1325 22-1307
ROUND TUBE O.D. 2 1/8˝ 2 1/8˝ 2 1/4˝
(L) LENGTH 72˝ 72˝ 72˝
WALL THICKNESS .120 (11 GA) .083 (14 GA) .120 (11 GA)
USE W/WELD YOKE PART NUMBER 22-1325 22-1307 22-1343
PART NUMBER 70-2125 --70-2250
SLIP SLEEVE (L) LUBE BORE LENGTH FITTING FOR TUBE 1 3/16˝ SQ 5˝ YES 2 1/4˝ X .120(11 GA) 1 3/16˝ SQ 5˝ YES 2 1/8˝ X .120(11 GA) 1 3/16˝ SQ 5˝ YES 2 1/8˝ X .083(14 GA)
SHIELD PART BRG. NO. NUMBER 56-2294 53-2434 56-2295 56-2294 53-2435 56-2295 --- 53-3500
BEARING STUB BEARING (L) DIAMETER DIAMETER END TO WELD 1 3/8˝-6 SPL 1 3/8˝ 4 1/2˝ *NOTE: FOR USE WITH PART NUMBER 22-1226 DRILLED FOR CONE POINTED SET SCREW
USE W/TUBE PART NUMBER 70-2250
PART NUMBER 53-2247*
DRIVE SHAFT WITH WORLD SHIELD™ OVERALL DRIVELINE LENGTH 36˝ 48˝ 60˝
(L) MINIMUM 28 1/2˝ 39˝ 51˝
(L) MAXIMUM 44 1/2˝ 65˝ 77˝
PART NUMBER 58-2229 58-2239 58-2251