Cat Upgrades D10 Dozer

Infused with industry-leading technology, the durable Cat® D10 Dozer burns less fuel, increases productivity and improves uptime.

Featuring a stator clutch torque converter and loadsensing hydraulics, the new design is up to 6% more efficient than the Cat D10T2. Its combination of improved technology, longer component life, extended oil changes and increased serviceability reduces maintenance and repair costs up to 8%, helping the new D10 deliver industryleading low cost of ownership.

The new D10 is powered by the Cat C27 engine, which offers aftertreatment solutions to meet U.S. EPA Tier 4 Final/EU Stage V as well as Tier 2 equivalent emissions standards for meeting the needs of the global market. Maximizing material moved per liter of fuel, the C27 switches power settings based on travel direction to offer up to 20% more power in reverse, reducing cycle times. In addition to delivering productivity gains of up to 3%, the new D10 offers up to a 4% fuel consumption advantage over the D10T2 and up to 10% over the D10T.

The dozer’s new torque converter design with stator clutch automatically frees up the stator when torque multiplication is not required, improving drivetrain efficiency for reduced fuel consumption. During high-load and retarding conditions, the stator clutch locks without the need for operator input.

594 Chilcotin Road, Kamloops, BC V2H 1G5

Load-sensing hydraulics deliver more power to the ground for increased responsiveness and added fuel efficiency.

The new cab for the D10 not only creates a comfortable operating environment that lowers noise, vibration, stress and fatigue, it is an integrated electronic platform designed to maximize productivity. The operator’s new multicolor touchscreen display monitors machine performance and allows machine parameters to be quickly tailored to the application.

carry and spread positions. In addition, the dozer is customizable to site conditions with multiple optional technologies designed to increase productivity and efficiency, including:

• AutoCarry™, which provides automatic blade control during the carry segment

• Cat Grade Control 3D that precisely positions the blade’s cutting edge for consistent grades

• Automatic Ripper Control to minimize track slip by automatically monitoring and adjusting engine speed and ripper shank depth

The innovative D10 of today leverages a range of onboard technologies and is future-ready to integrate tomorrow’s technology advancements. Standard with dual-tilt and Automated Blade Assist (ABA), the machine reduces operator workload by automating blade movement to preset load,

EQUIPMENT FOR RENT OR SALE

Shipped from the factory capable of integrating Cat MineStar™ technologies, the D10 optimizes grading efficiency and offers remote operating capabilities to keep the operator safe and comfortable. MineStar Terrain with Automatic Blade Control integrates full automatics, blade load and overcut protection into the control system to increase productivity and decrease fuel burn. It minimizes overcut, overfill and rehandling to lower costs. Optional MineStar Command for dozing features deep integration with the new D10’s electronic and hydraulic systems to deliver remote operation with reduced delay

Continued on page 10

• SPECIALIZING IN NEW & USED UNDERCARRIAGE

• PARTS

• EQUIPMENT RENTALS & REPAIRS

• TRACK PRESS FACILITY

• 2018 Hitachi ZX290LC-5N, 2 bkts, thumb, cabguard, catwalks, exc. cond., 3,800 hrs.

• 2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, exc. cond., 1,772 hrs.

• 2017 Komatsu PC350LC-8, 3 bkts, thumb, cabguard, catwalks, exc. cond. 4,415 hrs.

• 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, exc. cond., 2,725 hrs.

• 2014 Komatsu PC88MR-8, 2 bkts, hyd. Q/C & thumb, swing boom and blade, 2,400 hrs.

• 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., 75% U/C, exc. cond., 6,050 hrs.

• 2014 Hamm H13iX, 84” smoothdrum packer w/cab, A/C, low hrs, exc. cond.

• 2012 Hamm 3412, 84” smoothdrum packer w/shell kit, cab, A/C, exc. cond.

• 2014 Hamm 3307, 66” smoothdrum packer w/shell kit, cab, A/C, exc. cond.

• IDLER REBUILDING bkt, hyd. Q/C, forks, like new cond., 430 hrs.

HUGE INVENTORY OF USED UNDERCARRIAGE

Rollers

• Deere 2154 TGAʼs 28” 2 bar on new rails

• 290/350 Size TGA's, 32", 3 bar pads (good condition)

• ZX200LC/PC200LC TGA, 28” 2 Bar on new rails

• 200 Sized PC-200/ZX-200 Good Used Rails, 80% remaining

• ZX200 (Rebuilt) Track Adj. Assembly

1992 - 2023 and quick response to commands. Requiring no on-site network requirements, the portable and lightweight Command console provides quick and efficient line-ofsight remote control from up to 400 m (1,312 ft) for optimum operator visibility. For non-line-of-site operation, the Command station features a comfortable seat with familiar controls to flexibly operate individual machines on site or from miles away.

Major components for the D10, including the frame and powertrain, are built to be rebuilt using new, remanufactured or used parts and components to deliver a cost- effective second life of likenew performance at a fraction of the price. Life-enhancing upgrades made throughout the drivetrain help to improve component life. Optional Heavy-Duty Extended Life (HDXL) with DuraLink™ Un- dercarriage reduces scallop wear, features an 8,000-hour bushing seal life and delivers 20 to 40% longer life than the heavy-duty undercarriage.

The D10 design offers easy service and maintenance with features like new replaceable push-arm trunnion bearing inserts, so the dozer spends less time in the shop and more time dozing. The reengineered engine compartment integrates a single-plane cooling system that is up to 30% more resistant to plugging and improves heat dissipation to extend component life. Its new easy-access radiator door facilitates cleaning. Offering 50% more capacity, the new oil pan improves average oil quality and extends change intervals by up to an additional 250 hours.

Part of the new standard technology package for the D10, Remote Flash and Troubleshoot capabilities improve servicing efficiency. Remote Troubleshoot allows the dealer to remotely run dozer diagnostic testing while the machine is in operation to decrease downtime. Remote Flash allows the dealer to send software updates to the machine, so the D10 operates with the most current software to optimize equipment performance and productivity. SP

Source: Caterpillar

EXCAVATORS/FORKLIFTS

2020 Kubota KX018-4 Mini, c/w 2 buckets and thumb, cab, no door, blade $45,000.

2020 Kubota KX018-4 Mini Cab, no door, 2 buckets, thumb and blade $45,000.

2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. $84,500.

1999 Takeuchi TB016 Excavator $22,500. 6 New Tide Power Mini Excavators: TDU20, TDU25, TDU30 Call for pricing

BACKHOES/SKID STEERS

2018 Bobcat T630, 12.5” tracks, A/C, joystick controls $57,000.

Bobcat S850 Skid Steer, Enclosed cab, A/C, Air ride seat, 80” bucket $75,000.

2015 Caterpillar 246D 2 speed Skid Steer Loader, hyd Q/C, aux hyd, joystick controls, 72” bucket, ride control $41,500.

2015 Caterpillar 259D Compact Track Loader, Q/C, aux hyd, A/C cab, joystick steer, rearview camera, 78” bucket $58,900.

2015 Bobcat S510 Skid Steer Loader, solid tires, Q/C, aux hyd, cab, joystick controls, 61” bucket $41,000.

2005 Caterpillar 267B Multi Terrain, 71 HP, 2 speed, closed cab, heat $41,000.

2017 Caterpillar 246D Skid Steer, 74 HP, 7400lbs, closed cab, A/C, heat, 2 speed, 12x16.5 tires @ 90% $54,900.

ROLLERS/PACKERS/CRUSHING & PAVING

2004 Ingersoll Rand SD45D TF, 54” smooth drum, 80HP Cummins, plumbed for front blade $62,000.

2015 Volvo SD45D, 54” drum, Has EPA, Kubota Eng, 4cyl $53,000.

2012 Bomag BW124DH-40-SDC, 48” drum, Has EPA, Deutz 3 cyl Eng. 45HP $52,000.

2015 Volvo SD45D, 54” drum, smooth roller $53,000.

2013 Bomag BW211 D50 Smooth Drum Compactor, 84” Drum $59,000.

(2) 2005 Ammann ASC110 84” Smooth Drum Compactors $59,000 ea.

2018 Bobcat S650 Skid Steer Loader, 12x16.5 aperture tires @ 95%, cab, A/C, Pos. air shut off, 7 pin elec. kit, hyd Q/C, 2 speed 72” bucket $51,900.

2012 Bobcat S770 Skid Steer Loader, new tires, cab, A/C, ride control, joystick steer, 7pin elec. kit, hyd Q/C, 68” bucket, 2 speed $47,900.

2012 John Deere 310 SJ, A/C, Pilot controls, EPA, 4-1 bucket, 24” dig bucket $51,900.

2010 Case 590 Super M 4x4 Backhoe Loader $57,900.

2008 John Deere 310SJ 4x4 Loader Backhoe, 4895 hours, A/C, Ride control, joystick, pattern changer $57,000.

2015 Bobcat S510, Solid tires, Q/C $42,000.

2015 Bobcat S510, no A/C, has heater $46,000.

GRADERS & DOZERS

2008 John Deere 872D $105,000.

2012 John Deere 872GP AWD $149,000.

2009 John Deere 872D, 450 hrs on rebuilt engine $94,500.

2006 Volvo G940 Motor Grader, 6,475 Hours, 14’ MB, A/C, Aux Hyd, Ripper, Scarifier $75,000.

CRANES

1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires $24,900.

1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 $39,000

CRUSHING EQUIPMENT

1999 MVP 380 Cone (rebuilt) $175,000.

2007 Ingersoll Rand SD70D, 66” Smooth Drum with Padfoot shell kit $61,000.

2013 Bomag BW145 PDH 56”, Blade, 1050 hours $71,000.

BELLY DUMPS, LOW BEDS & TILT TRAILERS

2014 Diamond C 7 Ton Tilt Trailer 22’ x 8’ $12,000.

TRUCKS

20 Water trucks available, up to 4,000 gallon. Internationals, Freightliners, Kenworths, Peterbilts. Call for details and availability POR.

2011 International 4300 DuraStar, A/T, Hyd brakes $75,000.

1999 International 4900 Bucket truck 55’ Boom model $15,900.

2007 Ford F650 XL 2000 gal, Cummins 200 HP, 6 sp $53,900.

Four-metric-ton -7 Series mini excavator features fast cycle times and powerful digging forces

7 offers impressive features such as fast cycle times, efficient torque-limiting piston pumps that respond to load demands, and a larger counterweight for improved balance and durability.

“Weighing in at 4 metric tons, the DX42-7 delivers the power, maneuverability and versatility our customers have come to expect from DEVELON mini excavators,” says Thomas Lee, director of product management at DEVELON. “Whether it’s utility work, landscaping, construction or site prep, the DX42-7 boasts an impressive lifting capacity, enabling effortless movement of pipes, boulders and various materials. With its powerful digging forces, customers can accomplish more tasks in less time.”

DEVELON, a leading construction equipment manufacturer, is expanding its range of mini excavators with the introduction of the DX42-7.

With a 47-net-horsepower and conventional tail swing configuration, this model is ideally suited for navigating tight, congested jobsites and urban areas. Part of the nextgeneration -7 Series mini excavator lineup, the DX42-

The DX42-7 is equipped with exceptional capabilities that improve jobsite productivity. One optional standout feature is its four-way swing blade on the front, enabling optimal blade positioning and reducing the need for frequent machine repositioning, as well as facilitating efficient backfilling. Additional productivity features include the following:

• A thumb-ready arm: The DX42-7 comes equipped with a standard thumbready arm. Durable thumb mounts are seamlessly integrated into the excavator arm, eliminating the need for any welding when adding a thumb attachment.

• Quick-coupler-ready design: With a quick-coupler hydraulic piping installed at the end of the arm, the

DX42-7 eliminates the need for additional accessories when installing a compatible quick coupler to the machine. This design enhancement significantly reduces the time needed to switch attachments.

• Lever pattern control: Customers can choose between two control patterns, ISO and BHL. This allows customers to select the pattern that best suits their preferences and ensures ease of use during operation.

The cab of the DX42-7 is easy to enter, exit and work in, offering optimal comfort for operators. Two cabin options are available: open canopy and enclosed cab configuration. Enclosed cab models come with standard heating and air conditioning and hands-free Bluetooth® audio. The superior air conditioning system improves airflow through multiple vents, enhancing operator comfort even during long, hot days.

The controls, buttons and general operations on the DX42-7 make it easy to operate with confidence. A simple thumb switch located on the right joystick controls auxiliary hydraulic functions, making fine adjustments ef- fortless and improving efficiency and comfort throughout the workday. Moreover, the boom swing is also controlled by a thumb switch on the right joystick, eliminating the need for foot pedals and further simplifying operation.

The DX42-7 effectively addresses various challenges encountered on jobsites, particularly concerning visibility and safety. Here are a few notable features worth highlighting:

• A framed full-glass door improves visibility to the surrounding work area.

• For additional visibility, an optional rearview camera offers an extra perspective.

• High-illumination LED lamps are incorporated to offer optimal visibility of the work group, allowing operators to navigate across the jobsite.

• A standard travel alarm provides more jobsite awareness. The alarm is activated when the machine is moving in reverse motion or is operating on the jobsite, alerting workers to its presence.

• An optional rotating beacon is available for enhanced safety when working in high-traffic areas or low-light situations.

The DEVELON Fleet Management system comes standard on the DX42-7. The system gives owners and dealers access to vital equipment data, such as machine location, health and productivity. Through a user-friendly app and website, customers can conveniently monitor and analyze this information, helping them make informed decisions that can positively impact productivity and profitability.

DX42-7 Mini Excavator Specs

• Horsepower: 47 hp at 2200 rpm (34.6 kW)

• Operating weight: 9,877 lb. (4,480 kg)

• Maximum digging depth: 11 ft. 5 in. (3.5 m)

• Maximum digging reach (ground): 18 ft. 3 in. (5.6 m)

• Maximum loading height: 12 ft. 6 in. (3.8 m)

• Travel speed: 2.1 – 3.1 mph (3.4 – 5 km/hr)

Specs reflect the standard excavator arm. SP

Source: DEVELON