Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat)
EEC Version;3.0 Feb..2005
a) Disconnect the negative battery lead wire; b) Disconnect the positive battery; The disconnecting order can’t be reversed. When disconnecting the positive cable, don’t touch the body of the vehicle with the removal tool; otherwise the short circuit will occur and the gas will be ignited to damage the battery.
4.2.2 Installation a) Connect the positive cable; b) Connect the negative cable. 4.2.3 Inspection of Battery Open-Circuit Voltage a) Disconnect the cable on the battery terminals. Disconnect the negative pole first, and then the positive pole. f) Measure the voltage between the two poles of the battery. Full charging
13.1V
Under charging
12.3V
4.2.4 Battery Charging a) Lift the battery out of the vehicle. b) Connect the positive pole of the charger with the positive pole of the battery; Connect the negative pole of the charger with the negative pole of the battery. c) Charge the battery for the charging time marked on the battery.
Don’t use fast charging unless it is emergent. No smoking or open fire near the battery when charging. At the beginning or the end of charging, turn off the charger first to avoid the connecting part arcing. g) Measure the voltage 30 minutes after the charging is finished; It should reach the specified value; otherwise it needs recharging. Charging Current
Normal
0.7A
Fast
3.0A 63