ACCESSORIES
components Accessories TBM20
Thermostatic domestic water mixer 3/4“, incl. backflow inhibitor
65.-
TBM25
Thermostatic domestic water mixer 1“, incl. backflow inhibitor
150.-
120 013
EHP25 120 001
EHP45 120 002
EHP6
120 003
EHP9
120 004
2,5kW, 230V or 400V, 390 mm fitting length
255.-
4,5kW, 400V, 470 mm fitting length
285.-
6.0kW, 400V, 620 mm fitting length
305.-
9.0kW, 400V, 780 mm fitting length
330.-
120 014
Solar flow volume meter DMS20 130 005
DMS25
Electrical heating information
130 006
EHP25
EHP45
EHP6
EHP9
DMS20-HT 130 336
DMS25-HT
PS5000E
PS3000E
PS1500/2000E
PS800/1000E
PSC800/1000E
PSR800/1000E
PSR500E
DHW750/1000R2E
DHW300/400/ 500PR2E
DHW200PR2E
EHP
TANK
Selecting the electrical cartridge: Using a 2,5kW cartridge, approx. 100 l water can be heated in approx. 1,5 hrs from 10° up to 40°C. Observe local connection regulations. The electrical cartridges are only intended for auxiliary heating and horizontal installation (not for continuous operation).
130 337
DWV20 130 007
130 008
Stainless steel corrugated pipe, insulated
DWV32
Stainless steel corrugated pipe with 1” female/1” male thread screw connections allows solder free and flexible pipe laying into the house and accommodates heat expansion. Corrugated connector hose; 50 cm long
30.-
IWS100
Corrugated connector hose; 100 cm long
40.-
IWS300
Corrugated connector hose; 300 cm long
80.-
141 520 141 521
141 522
SSD
140 009
Silicone roof inlet up to Ø 35 mm, EPDM pipe sleeve with fastening flange on roof side
130 449
ETI22
Air vent 22 mm, weatherproof insulated
67.-
ETI28
Air vent 28 mm, weatherproof insulated
74.-
140 002 140 003
2013 prices – all prices are indicated in GBP excluding VAT
225.-
Flow volume meter for high temperatur applications, 1” female thread, 10-40 l/min (~30-120m2 coll. area), max. 185°C (long term) or 195°C (short term)
235.-
3-way motor valve 3/4” female thread
90.-
3-way motor valve 1” female thread
95.-
3-way motor operated valve 5/4”, incl. electric actuator
480.-
3-way distributor valve 3/4” incl. actuator
220.-
DWF25
3-way distributor valve 1” incl. actuator
250.-
DWF32
3-way fixed-value controller 5/4”, incl. drive and 2 m capillary tube
620.-
Sealing disc for bench screw ø12 mounting sytems on sheet metal roofing
5.-
130 088
67.-
Flow volume meter for high temperatur applications, 3/4” female thread, 2-12 l/min (~30m2 coll. area), max. 185°C (long term) or 195°C (short term)
DWF20 130 009
Air vents 140 001
185.-
Can be set between 40°C and 70°C for limiting temperature, incl. thermal actuator and capillary tube. Install according to instructions.
130 010
Air vent 18 mm, weatherproof insulated
Flow volume meter 1” female thread, 10-40 l/min (~30-120m2 coll. area), max 130°C
Three-way set-value control
25.-
ETI18
180.-
Motor valves with spring return 230V
DWV25
IWS50
Flow volume meter 3/4” female thread, 2-12 l/min (~30m2 coll. area), max. 130°C
VARIOUS SS12350-DS 182 101
65
Accessories
Electrical heating cartridges Immersion heater with 6/4“ male thread use only for secondary heating