TWIST DRILLS prof iline
1.01
Twist drills DIN 338 TL 3000 with split point Multirange drill especially suitable for drilling deep holes. Covers types N, H and W for a wide range of applications. Point cut: Point angle: Helix angle: Ø tolerance: right hand cutting
helical point from Ø 3,0 mm with split point DIN 1412 C 130° 40° h8
Packing unit: in plastic box
HSS ground
HSS-TiN ground
Surface: bright
Surface: TiN coating
Multirange drill consisting of heavy-duty high speed steel with reinforced drill core and parabolic flute to give improved chip removal. Ideal for drilling medium and long chipping materials. Suitable for drilling depths < 3 x diameter.
Like HSS-G plus titanium nitride coating. The TiN wear-resistant co ating increases the surface hardness to approx. 2,300 HV and the heat resistance to 600 °C.
Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 900 N/mm²), grey, malleable, ductile and die-cast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
Application areas: for unalloyed and alloyed steel (up to a strength of 1200 N/mm²), high chrome alloyed steel such as stainless and acidresistant steel, steel resistant to rust and acid, titanium, titanium alloys, cast iron, aluminium, aluminium alloys, copper, brass and bronze.
HSS Co 5 ground
HSS-TiAlN ground
Surface: golden brown
Surface: TiAlN coating
Like HSS-G plus cobalt alloyed. The cobalt content ensures increased heat resistance.
Like HSS-G plus titanium aluminium nitride coating. The TiAlN wear-resistant coating increases the surface hardness to approx. 3,000 HV and the heat resistance to 900 °C.
Application areas: for unalloyed and alloyed steel (up to a strength of 1200 N/mm²), steel resistant to rust and acid, cast iron, aluminium, aluminium alloys, copper, brass and bronze.
14
Twist drills
Application areas: for unalloyed and alloyed steel (up to a strength of 1200 N/mm²), high chrome alloyed steel such as stainless and acidresistant steel, steel resistant to rust and acid, titanium, titanium alloys, cast iron, aluminium, aluminium alloys, copper, brass and bronze.
« www.ruko.de » 1.01
Twist drills DIN 338 TL 3000 HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point Ø mm
Total length mm
Flute length mm
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
Article no. HSS-G TiAlN
Cont. pcs.
2,00 2,10 2,20 2,30 2,40 2,50 2,60 2,70 2,80 2,90 3,00 3,10 3,20 3,30 3,40 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,80 4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,60 5,70 5,80 5,90 6,00 6,10 6,20 6,30 6,40 6,50 6,60 6,70 6,80 6,90 7,00 7,10 7,20 7,30 7,40 7,50 7,60 7,70 7,80 7,90 8,00 8,10 8,20 8,30
49,0 49,0 53,0 53,0 57,0 57,0 57,0 61,0 61,0 61,0 61,0 65,0 65,0 65,0 70,0 70,0 70,0 70,0 75,0 75,0 75,0 75,0 75,0 80,0 80,0 80,0 80,0 80,0 86,0 86,0 86,0 86,0 86,0 86,0 93,0 93,0 93,0 93,0 93,0 93,0 93,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0
24,0 24,0 27,0 27,0 30,0 30,0 30,0 33,0 33,0 33,0 33,0 36,0 36,0 36,0 39,0 39,0 39,0 39,0 43,0 43,0 43,0 43,0 43,0 47,0 47,0 47,0 47,0 47,0 52,0 52,0 52,0 52,0 52,0 52,0 57,0 57,0 57,0 57,0 57,0 57,0 57,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 69,0 69,0 69,0 69,0 69,0 69,0 69,0 69,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0
258 020 258 021 258 022 258 023 258 024 258 025 258 026 258 027 258 028 258 029 258 030 258 031 258 032 258 033 258 034 258 035 258 036 258 037 258 038 258 039 258 040 258 041 258 042 258 043 258 044 258 045 258 046 258 047 258 048 258 049 258 050 258 051 258 052 258 053 258 054 258 055 258 056 258 057 258 058 258 059 258 060 258 061 258 062 258 063 258 064 258 065 258 066 258 067 258 068 258 069 258 070 258 071 258 072 258 073 258 074 258 075 258 076 258 077 258 078 258 079 258 080 258 081 258 082 258 083
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
229 020 229 021 229 022 229 023 229 024 229 025 229 026 229 027 229 028 229 029 229 030 229 031 229 032 229 033 229 034 229 035 229 036 229 037 229 038 229 039 229 040 229 041 229 042 229 043 229 044 229 045 229 046 229 047 229 048 229 049 229 050 229 051 229 052 229 053 229 054 229 055 229 056 229 057 229 058 229 059 229 060 229 061 229 062 229 063 229 064 229 065 229 066 229 067 229 068 229 069 229 070 229 071 229 072 229 073 229 074 229 075 229 076 229 077 229 078 229 079 229 080 229 081 229 082 229 083
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
258 020 T 258 021 T 258 022 T 258 023 T 258 024 T 258 025 T 258 026 T 258 027 T 258 028 T 258 029 T 258 030 T 258 031 T 258 032 T 258 033 T 258 034 T 258 035 T 258 036 T 258 037 T 258 038 T 258 039 T 258 040 T 258 041 T 258 042 T 258 043 T 258 044 T 258 045 T 258 046 T 258 047 T 258 048 T 258 049 T 258 050 T 258 051 T 258 052 T 258 053 T 258 054 T 258 055 T 258 056 T 258 057 T 258 058 T 258 059 T 258 060 T 258 061 T 258 062 T 258 063 T 258 064 T 258 065 T 258 066 T 258 067 T 258 068 T 258 069 T 258 070 T 258 071 T 258 072 T 258 073 T 258 074 T 258 075 T 258 076 T 258 077 T 258 078 T 258 079 T 258 080 T 258 081 T 258 082 T 258 083 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
258 020 F 258 021 F 258 022 F 258 023 F 258 024 F 258 025 F 258 026 F 258 027 F 258 028 F 258 029 F 258 030 F 258 031 F 258 032 F 258 033 F 258 034 F 258 035 F 258 036 F 258 037 F 258 038 F 258 039 F 258 040 F 258 041 F 258 042 F 258 043 F 258 044 F 258 045 F 258 046 F 258 047 F 258 048 F 258 049 F 258 050 F 258 051 F 258 052 F 258 053 F 258 054 F 258 055 F 258 056 F 258 057 F 258 058 F 258 059 F 258 060 F 258 061 F 258 062 F 258 063 F 258 064 F 258 065 F 258 066 F 258 067 F 258 068 F 258 069 F 258 070 F 258 071 F 258 072 F 258 073 F 258 074 F 258 075 F 258 076 F 258 077 F 258 078 F 258 079 F 258 080 F 258 081 F 258 082 F 258 083 F
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Twist drills
15
1.01 16
Twist drills DIN 338 TL 3000 HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point Ø mm
Total length mm
Flute length mm
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
Article no. HSS-G TiAlN
Cont. pcs.
8,40 8,50 8,60 8,70 8,80 8,90 9,00 9,10 9,20 9,30 9,40 9,50 9,60 9,70 9,80 9,90 10,00 10,10 10,20 10,30 10,40 10,50 10,60 10,70 10,80 10,90 11,00 11,10 11,20 11,30 11,40 11,50 11,60 11,70 11,80 11,90 12,00 12,10 12,20 12,30 12,40 12,50 12,60 12,70 12,80 12,90 13,00 13,50 14,00 14,50 15,00 15,50 16,00
117,0 117,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 142,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 160,0 160,0 169,0 169,0 178,0 178,0
75,0 75,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 94,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 108,0 108,0 114,0 114,0 120,0 120,0
258 084 258 085 258 086 258 087 258 088 258 089 258 090 258 091 258 092 258 093 258 094 258 095 258 096 258 097 258 098 258 099 258 100 258 101 258 102 258 103 258 104 258 105 258 106 258 107 258 108 258 109 258 110 258 111 258 112 258 113 258 114 258 115 258 116 258 117 258 118 258 119 258 120 258 121 258 122 258 123 258 124 258 125 258 126 258 127 258 128 258 129 258 130 258 135 258 140 258 145 258 150 258 155 258 160
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
229 084 229 085 229 086 229 087 229 088 229 089 229 090 229 091 229 092 229 093 229 094 229 095 229 096 229 097 229 098 229 099 229 100 — 229 102 — — 229 105 — — — — 229 110 — — — — 229 115 — — — — 229 120 — — — — 229 125 — — — — 229 130 229 135 229 140 229 145 229 150 229 155 229 160
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 — 10 — — 5 — — — — 5 — — — — 5 — — — — 5 — — — — 5 — — — — 5 5 5 5 5 5 5
258 084 T 258 085 T 258 086 T 258 087 T 258 088 T 258 089 T 258 090 T 258 091 T 258 092 T 258 093 T 258 094 T 258 095 T 258 096 T 258 097 T 258 098 T 258 099 T 258 100 T 258 101 T 258 102 T 258 103 T 258 104 T 258 105 T 258 106 T 258 107 T 258 108 T 258 109 T 258 110 T 258 111 T 258 112 T 258 113 T 258 114 T 258 115 T 258 116 T 258 117 T 258 118 T 258 119 T 258 120 T 258 121 T 258 122 T 258 123 T 258 124 T 258 125 T 258 126 T 258 127 T 258 128 T 258 129 T 258 130 T 258 135 T 258 140 T 258 145 T 258 150 T 258 155 T 258 160 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
258 084 F 258 085 F 258 086 F 258 087 F 258 088 F 258 089 F 258 090 F 258 091 F 258 092 F 258 093 F 258 094 F 258 095 F 258 096 F 258 097 F 258 098 F 258 099 F 258 100 F 258 101 F 258 102 F 258 103 F 258 104 F 258 105 F 258 106 F 258 107 F 258 108 F 258 109 F 258 110 F 258 111 F 258 112 F 258 113 F 258 114 F 258 115 F 258 116 F 258 117 F 258 118 F 258 119 F 258 120 F 258 121 F 258 122 F 258 123 F 258 124 F 258 125 F 258 126 F 258 127 F 258 128 F 258 129 F 258 130 F 258 135 F 258 140 F 258 145 F 258 150 F 258 155 F 258 160 F
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
Twist drills
« www.ruko.de »
No. 258 214
No. 229 214
No. 258 214 T
1.01
Twist drills DIN 338 TL 3000 HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point in steel case
No. 258 214 F
Description
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
Article no. HSS-G TiAlN
19-piece set of twist drills DIN 338 TL 3000 Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm
258 214
229 214
258 214 T
258 214 F
25-piece set of twist drills DIN 338 TL 3000 Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm
258 215
229 215
258 215 T
258 215 F
Twist drills DIN 338 TL 3000 HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point in polystyrene case
No. 258 214
No. 229 214
Description
No. 258 214 T
No. 258 214 F
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
Article no. HSS-G TiAlN
19-piece set of twist drills DIN 338 TL 3000 Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm
258 214 RO
229 214 RO
258 214 TRO
258 214 FRO
25-piece set of twist drills DIN 338 TL 3000 Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm
258 215 RO
229 215 RO
258 215 TRO
258 215 FRO
Twist drills
17
1.01
Jobber length DIN 338 TL 3000 in fractional sizes HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point Ø in inch
Ø in mm
Total length in inch
Flute length in inch
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
Article no. HSS-G TiAlN
Cont. pcs.
1/16
1,59 1,98 2,38 2,78 3,18 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,53 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70
1 7/8 2 2 1/4 2 5/8 2 3/4 2 7/8 3 1/8 3 1/4 3 1/2 3 5/8 3 3/4 3 7/8 4 4 1/8 4 1/4 4 3/8 4 1/2 4 5/8 4 3/4 4 7/8 5 5 1/8 5 1/4 5 3/8 5 1/2 5 5/8 5 3/4 5 7/8 6
7/8
258 801 258 802 258 803 258 804 258 805 258 806 258 807 258 808 258 809 258 810 258 811 258 812 258 813 258 814 258 815 258 816 258 817 258 818 258 819 258 820 258 821 258 822 258 823 258 824 258 825 258 826 258 827 258 828 258 829
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
229 801 229 802 229 803 229 804 229 805 229 806 229 807 229 808 229 809 229 810 229 811 229 812 229 813 229 814 229 815 229 816 229 817 229 818 229 819 229 820 229 821 229 822 229 823 229 824 229 825 229 826 229 827 229 828 229 829
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
258 801 T 258 802 T 258 803 T 258 804 T 258 805 T 258 806 T 258 807 T 258 808 T 258 809 T 258 810 T 258 811 T 258 812 T 258 813 T 258 814 T 258 815 T 258 816 T 258 817 T 258 818 T 258 819 T 258 820 T 258 821 T 258 822 T 258 823 T 258 824 T 258 825 T 258 826 T 258 827 T 258 828 T 258 829 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
258 801 F 258 802 F 258 803 F 258 804 F 258 805 F 258 806 F 258 807 F 258 808 F 258 809 F 258 810 F 258 811 F 258 812 F 258 813 F 258 814 F 258 815 F 258 816 F 258 817 F 258 818 F 258 819 F 258 820 F 258 821 F 258 822 F 258 823 F 258 824 F 258 825 F 258 826 F 258 827 F 258 828 F 258 829 F
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
5/64 3/32 7/64 1/8 9/64
5/32 11/64
3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
1
1 1/4 1 1/2 1 5/8 1 3/4 2 2 1/8 2 5/16 2 7/16 2 1/2 2 5/8 2 3/4 2 7/8 2 15/16 3 1/16 3 3/16 3 5/16 3 7/16 3 1/2 3 5/8 3 3/4 3 7/8 3 15/16 4 1/16 4 3/16 4 5/16 4 3/8 4 1/2
Jobber length sets DIN 338 TL 3000 with fractional sizes HSS, HSS Co 5, HSS-TiN and HSS-TiAlN ground with split point in steel case
No. 258 850
18
No. 229 850
No. 258 850 T
No. 258 850 F
Description
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
Article no. HSS-G TiAlN
21-piece set of jobber length DIN 338 TL 3000 Ø 1/16" up to 3/8" in increments of 1/64"
258 850
229 850
258 850 T
258 850 F
29-piece set of jobber length DIN 338 TL 3000 Ø 1/16" up to 1/2" in increments of 1/64"
258 851
229 851
258 851 T
258 851 F
Twist drills
1.01
« www.ruko.de »
Twist drills
19
1.01
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30° Ø tolerance: h8 right hand cutting
Packing unit:
in plastic box
HSS rolled
HSS ground
Point cut: helical point Point angle: 118° Surface: black, steam tempered
Point cut: from Ø 3,0 mm with split point DIN 1412 C Point angle: 118° Surface: bright
High performance rolled twist drill consisting of heavy-duty high speed steel. The material is strengthened by the rolled production process and is more resistant to fracture.
High performance ground twist drill consisting of heavy-duty high speed steel. The fully ground twist drill has a more precise concentricity.
Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 900 N/mm²), grey, malleable, ductile and die-cast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
HSS Co 5 ground
HSS-TiN ground
Point cut: from Ø 3,0 mm with split point DIN 1412 C Point angle: 130° Surface: golden brown
Point cut: from Ø 3,0 mm with split point DIN 1412 C Point angle: 118° Surface: TiN coating
Like HSS-G plus cobalt alloyed. The cobalt content ensures increased heat resistance.
Like HSS-G plus titanium nitride coating. The TiN wear resistant coating increases the surface hardness to approx. 2,300 HV and the heat resistance to 600 °C. Achieves longer tool life with increased cutting values. Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 1100 N/mm²), grey, malleable, ductile and die-cast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
Application areas: for unalloyed and alloyed steel (up to a strength of 1100 N/mm²), hot and cold-working steel, reinforced and case-hardened steel and also steel resistant to rust and acid.
20
Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 900 N/mm²), grey, malleable, ductile and die-cast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
Twist drills
« www.ruko.de »
Ø mm
0,30 0,40 0,50 0,60 0,70 0,80 0,90 1,00 1,10 1,20 1,25 1,30 1,40 1,50 1,60 1,70 1,75 1,80 1,90 2,00 2,10 2,20 2,25 2,30 2,40 2,50 2,60 2,70 2,75 2,80 2,90 3,00 3,10 3,20 3,25 3,30 3,40 3,50 3,60 3,70 3,75 3,80 3,90 4,00 4,10 4,20 4,25 4,30 4,40 4,50 4,60 4,70 4,75 4,80 4,90 5,00 5,10 5,20 5,25 5,30 5,40 5,50 5,60 5,70
Total length mm
19,0 20,0 22,0 24,0 28,0 30,0 32,0 34,0 36,0 38,0 38,0 38,0 40,0 40,0 43,0 43,0 46,0 46,0 46,0 49,0 49,0 53,0 53,0 53,0 57,0 57,0 57,0 61,0 61,0 61,0 61,0 61,0 65,0 65,0 65,0 65,0 70,0 70,0 70,0 70,0 70,0 75,0 75,0 75,0 75,0 75,0 75,0 80,0 80,0 80,0 80,0 80,0 80,0 86,0 86,0 86,0 86,0 86,0 86,0 86,0 93,0 93,0 93,0 93,0
Flute length mm
3,0 5,0 6,0 7,0 9,0 10,0 11,0 12,0 14,0 16,0 16,0 16,0 18,0 18,0 20,0 20,0 20,0 22,0 22,0 24,0 24,0 27,0 27,0 27,0 30,0 30,0 30,0 33,0 33,0 33,0 33,0 33,0 36,0 36,0 36,0 36,0 39,0 39,0 39,0 39,0 39,0 43,0 43,0 43,0 43,0 43,0 43,0 47,0 47,0 47,0 47,0 47,0 47,0 52,0 52,0 52,0 52,0 52,0 52,0 52,0 57,0 57,0 57,0 57,0
Article no. HSS-R
201 003 201 004 201 005 201 006 201 007 201 008 201 009 201 010 201 011 201 012 201 0125 201 013 201 014 201 015 201 016 201 017 201 0175 201 018 201 019 201 020 201 021 201 022 201 0225 201 023 201 024 201 025 201 026 201 027 201 0275 201 028 201 029 201 030 201 031 201 032 201 0325 201 033 201 034 201 035 201 036 201 037 201 0375 201 038 201 039 201 040 201 041 201 042 201 0425 201 043 201 044 201 045 201 046 201 047 201 0475 201 048 201 049 201 050 201 051 201 052 201 0525 201 053 201 054 201 055 201 056 201 057
Cont. pcs.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Article no. HSS-G
214 003 214 004 214 005 214 006 214 007 214 008 214 009 214 010 214 011 214 012 214 0125 214 013 214 014 214 015 214 016 214 017 214 0175 214 018 214 019 214 020 214 021 214 022 214 0225 214 023 214 024 214 025 214 026 214 027 214 0275 214 028 214 029 214 030 214 031 214 032 214 0325 214 033 214 034 214 035 214 036 214 037 214 0375 214 038 214 039 214 040 214 041 214 042 214 0425 214 043 214 044 214 045 214 046 214 047 214 0475 214 048 214 049 214 050 214 051 214 052 214 0525 214 053 214 054 214 055 214 056 214 057
Cont. pcs.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Article no. HSS-G Co 5
— — — — — — — 215 010 215 011 215 012 215 0125 215 013 215 014 215 015 215 016 215 017 215 0175 215 018 215 019 215 020 215 021 215 022 215 0225 215 023 215 024 215 025 215 026 215 027 215 0275 215 028 215 029 215 030 215 031 215 032 215 0325 215 033 215 034 215 035 215 036 215 037 215 0375 215 038 215 039 215 040 215 041 215 042 215 0425 215 043 215 044 215 045 215 046 215 047 215 0475 215 048 215 049 215 050 215 051 215 052 215 0525 215 053 215 054 215 055 215 056 215 057
1.01
Twist drills DIN 338 type N HSS rolled, HSS ground, HSS Co 5 ground and HSS-TiN ground Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
— — — — — — — 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
250 003 T 250 004 T 250 005 T 250 006 T 250 007 T 250 008 T 250 009 T 250 010 T 250 011 T 250 012 T 250 0125 T 250 013 T 250 014 T 250 015 T 250 016 T 250 017 T 250 0175 T 250 018 T 250 019 T 250 020 T 250 021 T 250 022 T 250 0225 T 250 023 T 250 024 T 250 025 T 250 026 T 250 027 T 250 0275 T 250 028 T 250 029 T 250 030 T 250 031 T 250 032 T 250 0325 T 250 033 T 250 034 T 250 035 T 250 036 T 250 037 T 250 0375 T 250 038 T 250 039 T 250 040 T 250 041 T 250 042 T 250 0425 T 250 043 T 250 044 T 250 045 T 250 046 T 250 047 T 250 0475 T 250 048 T 250 049 T 250 050 T 250 051 T 250 052 T 250 0525 T 250 053 T 250 054 T 250 055 T 250 056 T 250 057 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Twist drills
21
1.01 22
Twist drills DIN 338 type N HSS rolled, HSS ground, HSS Co 5 ground and HSS-TiN ground Ø mm
Total length mm
5,70 5,75 5,80 5,90 6,00 6,10 6,20 6,25 6,30 6,40 6,50 6,60 6,70 6,75 6,80 6,90 7,00 7,10 7,20 7,25 7,30 7,40 7,50 7,60 7,70 7,75 7,80 7,90 8,00 8,10 8,20 8,25 8,30 8,40 8,50 8,60 8,70 8,75 8,80 8,90 9,00 9,10 9,20 9,25 9,30 9,40 9,50 9,60 9,70 9,75 9,80 9,90 10,00 10,10 10,20 10,30 10,40 10,50 10,60 10,70 10,80 10,90 11,00 11,10
93,0 93,0 93,0 93,0 93,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 117,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 125,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 133,0 142,0 142,0 142,0 142,0 142,0
Twist drills
Flute length mm
57,0 57,0 57,0 57,0 57,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 63,0 69,0 69,0 69,0 69,0 69,0 69,0 69,0 69,0 69,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 75,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 81,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 87,0 94,0 94,0 94,0 94,0 94,0
Article no. HSS-R
201 057 201 0575 201 058 201 059 201 060 201 061 201 062 201 0625 201 063 201 064 201 065 201 066 201 067 201 0675 201 068 201 069 201 070 201 071 201 072 201 0725 201 073 201 074 201 075 201 076 201 077 201 0775 201 078 201 079 201 080 201 081 201 082 201 0825 201 083 201 084 201 085 201 086 201 087 201 0875 201 088 201 089 201 090 201 091 201 092 201 0925 201 093 201 094 201 095 201 096 201 097 201 0975 201 098 201 099 201 100 201 101 201 102 201 103 201 104 201 105 201 106 201 107 201 108 201 109 201 110 201 111
Cont. pcs.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5
Article no. HSS-G
214 057 214 0575 214 058 214 059 214 060 214 061 214 062 214 0625 214 063 214 064 214 065 214 066 214 067 214 0675 214 068 214 069 214 070 214 071 214 072 214 0725 214 073 214 074 214 075 214 076 214 077 214 0775 214 078 214 079 214 080 214 081 214 082 214 0825 214 083 214 084 214 085 214 086 214 087 214 0875 214 088 214 089 214 090 214 091 214 092 214 0925 214 093 214 094 214 095 214 096 214 097 214 0975 214 098 214 099 214 100 214 101 214 102 214 103 214 104 214 105 214 106 214 107 214 108 214 109 214 110 214 111
Cont. pcs.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5
Article no. HSS-G Co 5
215 057 215 0575 215 058 215 059 215 060 215 061 215 062 215 0625 215 063 215 064 215 065 215 066 215 067 215 0675 215 068 215 069 215 070 215 071 215 072 215 0725 215 073 215 074 215 075 215 076 215 077 215 0775 215 078 215 079 215 080 215 081 215 082 215 0825 215 083 215 084 215 085 215 086 215 087 215 0875 215 088 215 089 215 090 215 091 215 092 215 0925 215 093 215 094 215 095 215 096 215 097 215 0975 215 098 215 099 215 100 — 215 102 — — 215 105 — — — — 215 110 —
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 — 10 — — 5 — — — — 5 —
250 057 T 250 0575 T 250 058 T 250 059 T 250 060 T 250 061 T 250 062 T 250 0625 T 250 063 T 250 064 T 250 065 T 250 066 T 250 067 T 250 0675 T 250 068 T 250 069 T 250 070 T 250 071 T 250 072 T 250 0725 T 250 073 T 250 074 T 250 075 T 250 076 T 250 077 T 250 0775 T 250 078 T 250 079 T 250 080 T 250 081 T 250 082 T 250 0825 T 250 083 T 250 084 T 250 085 T 250 086 T 250 087 T 250 0875 T 250 088 T 250 089 T 250 090 T 250 091 T 250 092 T 250 0925 T 250 093 T 250 094 T 250 095 T 250 096 T 250 097 T 250 0975 T 250 098 T 250 099 T 250 100 T 250 101 T 250 102 T 250 103 T 250 104 T 250 105 T 250 106 T 250 107 T 250 108 T 250 109 T 250 110 T 250 111 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5
« www.ruko.de » 1.01
Twist drills DIN 338 type N HSS rolled, HSS ground, HSS Co 5 ground and HSS-TiN ground Ø mm
Total length mm
Flute length mm
Article no. HSS-R
Cont. pcs.
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
11,20 11,30 11,40 11,50 11,60 11,70 11,80 11,90 12,00 12,10 12,20 12,30 12,40 12,50 12,60 12,70 12,80 12,90 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00 18,50 19,00 19,50 20,00
142,0 142,0 142,0 142,0 142,0 142,0 142,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 151,0 160,0 160,0 169,0 169,0 178,0 178,0 184,0 184,0 191,0 191,0 198,0 198,0 205,0 205,0
94,0 94,0 94,0 94,0 94,0 94,0 94,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 101,0 108,0 108,0 114,0 114,0 120,0 120,0 125,0 125,0 130,0 130,0 135,0 135,0 140,0 140,0
201 112 201 113 201 114 201 115 201 116 201 117 201 118 201 119 201 120 201 121 201 122 201 123 201 124 201 125 201 126 201 127 201 128 201 129 201 130 201 135 201 140 201 145 201 150 201 155 201 160 201 165 201 170 201 175 201 180 201 185 201 190 201 195 201 200
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1
214 112 214 113 214 114 214 115 214 116 214 117 214 118 214 119 214 120 214 121 214 122 214 123 214 124 214 125 214 126 214 127 214 128 214 129 214 130 214 135 214 140 214 145 214 150 214 155 214 160 — — — — — — — —
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 — — — — — — — —
— — — 215 115 — — — — 215 120 — — — — 215 125 — — — — 215 130 215 135 215 140 215 145 215 150 215 155 215 160 — — — — — — — —
— — — 5 — — — — 5 — — — — 5 — — — — 5 5 5 5 5 5 5 — — — — — — — —
250 112 T 250 113 T 250 114 T 250 115 T 250 116 T 250 117 T 250 118 T 250 119 T 250 120 T 250 121 T 250 122 T 250 123 T 250 124 T 250 125 T 250 126 T 250 127 T 250 128 T 250 129 T 250 130 T 250 135 T 250 140 T 250 145 T 250 150 T 250 155 T 250 160 T — — — — — — — —
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 — — — — — — — —
Twist drill sets DIN 338 type N HSS and HSS Co 5 ground with split point in magazine Description
Article no.
Consisting of 170 twist drills DIN 338 type N HSS ground 10 pcs, Ø 1,0 - 8,0 mm in increments of 0,5 mm 5 pcs, Ø 8,5 - 10,0 mm in increments of 0,5 mm
214 200
Consisting of 170 twist drills DIN 338 type N HSS Co 5 ground 10 pcs, Ø 1,0 - 8,0 mm in increments of 0,5 mm 5 pcs, Ø 8,5 - 10,0 mm in increments of 0,5 mm
215 200 No. 214 200
Twist drills
23
1.01
Twist drill sets DIN 338 type N HSS rolled, HSS ground, HSS Co 5 ground and HSS-TiN ground in steel case
No. 205 212
No. 214 214
No. 215 214
No. 250 214 T
Description
Article no. HSS-R
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
19-piece set of twist drills DIN 338 type N Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm
205 212
214 214
215 214
250 214 T
25-piece set of twist drills DIN 338 type N Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm
205 213
214 215
215 215
250 215 T
41-piece set of twist drills DIN 338 type N Ø 6,0 mm up to 10,0 mm in increments of 0,1 mm
205 218
214 218
215 218
—
50-piece set of twist drills DIN 338 type N Ø 1,0 mm up to 5,9 mm in increments of 0,1 mm
205 217
214 217
215 217
—
Twist drill sets DIN 338 type N HSS rolled, HSS ground, HSS Co 5 ground and HSS-TiN ground in polystyrene case
No. 205 212 RO
No. 214 214 RO
Description
24
No. 215 214 RO
No. 250 214 TRO
Article no. HSS-R
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
19-piece set of twist drills DIN 338 type N Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm
205 212 RO
214 214 RO
215 214 RO
250 214 TRO
25-piece set of twist drills DIN 338 type N Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm
205 213 RO
214 215 RO
215 215 RO
250 215 TRO
Twist drills
« www.ruko.de » 1.01
Twist drill sets DIN 338 type N HSS rolled in steel case Description
Article no.
13-piece set of twist drills DIN 338 type N Ø 1,5 mm up to 6,5 mm in increments of 0,5 mm + Ø 3,3 and 4,2 mm
205 207
Twist drill sets DIN 338 type N HSS rolled, HSS ground and HSS Co 5 ground in bench stand Description
Article no.
91-piece set of twist drills DIN 338 type N HSS rolled Ø 1,0 mm up to 10,0 mm in increments of 0,1 mm
205 223
91-piece set of twist drills DIN 338 type N HSS ground Ø 1,0 mm up to 10,0 mm in increments of 0,1 mm
214 223
91-piece set of twist drills DIN 338 type N HSS Co 5 ground Ø 1,0 mm up to 10,0 mm in increments of 0,1 mm
215 223 No. 205 223
Drill cabinet Description
Article no.
Drill cabinet empty Ø 1,0 mm up to 10,0 mm in increments of 0,1 mm + Ø 10,5 mm up to 13,0 mm in increments of 0,5 mm
205 2081 L
Drill cabinet empty Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm
205 208 L
Drill cabinet consisting of 570 twist drills DIN 338 type N HSS rolled contents list see below
205 208
Drill cabinet consisting of 570 twist drills DIN 338 type N HSS ground contents list see below
214 208
Drill cabinet consisting of 570 twist drills DIN 338 type N HSS Co 5 ground contents list see below
215 208
No. 205 208 L
Contents list: Ø mm x pcs.
Ø mm x pcs.
Ø mm x pcs.
Ø mm x pcs.
Ø mm x pcs.
1,0 x 50 1,5 x 50 2,0 x 50 2,5 x 50 3,0 x 30
3,5 x 30 4,0 x 30 4,5 x 30 5,0 x 30 5,5 x 30
6,0 x 20 6,5 x 20 7,0 x 20 7,5 x 20 8,0 x 10
8,5 x 10 9,0 x 10 9,5 x 10 10,0 x 10 10,5 x 10
11,0 x 10 11,5 x 10 12,0 x 10 12,5 x 10 13,0 x 10
No. 205 2081 L
Twist drills
25
1.01
Jobber length DIN 338 type N in fractional sizes HSS, HSS Co 5 and HSS-TiN ground with split point Ø in inch
Ø in mm
Total length in inch
Flute length in inch
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G TiN
Cont. pcs.
1/16
1,59 1,98 2,38 2,78 3,18 3,57 3,97 4,37 4,76 5,16 5,56 5,95 6,35 6,75 7,14 7,54 7,94 8,33 8,73 9,13 9,53 9,92 10,32 10,72 11,11 11,51 11,91 12,30 12,70
1 7/8 2 2 1/4 2 5/8 2 3/4 2 7/8 3 1/8 3 1/4 3 1/2 3 5/8 3 3/4 3 7/8 4 4 1/8 4 1/4 4 3/8 4 1/2 4 5/8 4 3/4 4 7/8 5 5 1/8 5 1/4 5 3/8 5 1/2 5 5/8 5 3/4 5 7/8 6
7/8
214 801 214 802 214 803 214 804 214 805 214 806 214 807 214 808 214 809 214 810 214 811 214 812 214 813 214 814 214 815 214 816 214 817 214 818 214 819 214 820 214 821 214 822 214 823 214 824 214 825 214 826 214 827 214 828 214 829
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
215 801 215 802 215 803 215 804 215 805 215 806 215 807 215 808 215 809 215 810 215 811 215 812 215 813 215 814 215 815 215 816 215 817 215 818 215 819 215 820 215 821 215 822 215 823 215 824 215 825 215 826 215 827 215 828 215 829
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
250 801 T 250 802 T 250 803 T 250 804 T 250 805 T 250 806 T 250 807 T 250 808 T 250 809 T 250 810 T 250 811 T 250 812 T 250 813 T 250 814 T 250 815 T 250 816 T 250 817 T 250 818 T 250 819 T 250 820 T 250 821 T 250 822 T 250 823 T 250 824 T 250 825 T 250 826 T 250 827 T 250 828 T 250 829 T
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5
5/64 3/32 7/64 1/8 9/64
5/32 11/64
3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
1
1 1/4 1 1/2 1 5/8 1 3/4 2 2 1/8 2 5/16 2 7/16 2 1/2 2 5/8 2 3/4 2 7/8 2 15/16 3 1/16 3 3/16 3 5/16 3 7/16 3 1/2 3 5/8 3 3/4 3 7/8 3 15/16 4 1/16 4 3/16 4 5/16 4 3/8 4 1/2
Twist drill sets DIN 338 type N with fractional sizes HSS, HSS Co 5 and HSS-TiN ground with split point in steel case
No. 214 850
26
No. 215 850
No. 250 850 T
Description
Article no. HSS-G
Article no. HSS-G Co 5
Article no. HSS-G TiN
21-piece set of jobber length DIN 338 type N Ø 1/16" up to 3/8" in increments of 1/64"
214 850
215 850
250 850 T
29-piece set of jobber length DIN 338 type N Ø 1/16" up to 1/2" in increments of 1/64"
214 851
215 851
250 851 T
Twist drills
« www.ruko.de » 1.01
Twist drills DIN 338 type N HSS rolled, HSS ground and HSS Co 5 ground in plastic bags Point cut: helical point Helix angle: 20-30° Ø tolerance: h8 right hand cutting
Packing unit: in plastic bags
Ø mm
Total length mm
Flute length mm
Article no. HSS-R
Cont. pcs.
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
1,00 1,50 2,00 2,50 2,90 3,00 3,20 3,30 3,50 3,70 4,00 4,20 4,50 4,80 5,00 5,50 6,00 6,50 6,80 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,20 10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00
34,0 40,0 49,0 57,0 61,0 61,0 65,0 65,0 70,0 70,0 75,0 75,0 80,0 86,0 86,0 93,0 93,0 101,0 109,0 109,0 109,0 117,0 117,0 125,0 125,0 133,0 133,0 133,0 142,0 142,0 151,0 151,0 151,0 160,0 160,0 169,0 169,0 178,0 178,0
12,0 18,0 24,0 30,0 33,0 33,0 36,0 36,0 39,0 39,0 43,0 43,0 47,0 52,0 52,0 57,0 57,0 63,0 69,0 69,0 69,0 75,0 75,0 81,0 81,0 87,0 87,0 87,0 94,0 94,0 101,0 101,0 101,0 108,0 108,0 114,0 114,0 120,0 120,0
206 010 206 015 206 020 206 025 206 029 206 030 206 032 206 033 206 035 206 037 206 040 206 042 206 045 206 048 206 050 206 055 206 060 206 065 206 068 206 070 206 075 206 080 206 085 206 090 206 095 206 100 206 102 206 105 206 110 206 115 206 120 206 125 206 130 206 135 206 140 206 145 206 150 206 155 206 160
3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2144 010 2144 015 2144 020 2144 025 2144 029 2144 030 2144 032 2144 033 2144 035 2144 037 2144 040 2144 042 2144 045 2144 048 2144 050 2144 055 2144 060 2144 065 2144 068 2144 070 2144 075 2144 080 2144 085 2144 090 2144 095 2144 100 2144 102 2144 105 2144 110 2144 115 2144 120 2144 125 2144 130 — — — — — —
2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — — — — —
2155 010 2155 015 2155 020 2155 025 2155 029 2155 030 2155 032 2155 033 2155 035 2155 037 2155 040 2155 042 2155 045 2155 048 2155 050 2155 055 2155 060 2155 065 2155 068 2155 070 2155 075 2155 080 2155 085 2155 090 2155 095 2155 100 2155 102 2155 105 2155 110 2155 115 2155 120 2155 125 2155 130 — — — — — —
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — — — — —
Twist drills
27
1.01
Twist drills DIN 345 type N Highly efficient standard drill with Morse taper. High security against fracture. Point cut: Point angle: Helix angle: Ø tolerance: right hand cutting
cut chisel edge in accordance with DIN 1412 A 118° 20-30° h8
Packing unit:
in plastic box
HSS
HSS Co 5 ground
HSS Co 5 TiN ground
Surface: bright / ground
Surface: bright
Surface: TiN coating
Highly efficient standard drill consisting of heavy-duty high speed steel usable for all drilling work in normal materials.
Highly efficient standard drill consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable for drilling of materials that are difficult to drill and for highest loading.
Like HSS Co 5 ground plus titanium nitride coating. The TiN wear-resistant coating increases the surface hardness to approx. 2,300 HV and the heat resistance to 600 °C. Ideally suitable for drilling of materials that are difficult to drill and for highest loading.
Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/mm² strength, grey cast, malleable cast iron, diecast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Applications: for steel and cast-steel alloyed and unalloyed over 900 N/mm² strength, grey cast, malleable cast, high-alloyed chromium steel such as stainless and acid resistant steel.
Applications: for steel and cast-steel alloyed and unalloyed up to approx. 1.200 N/mm² strength, grey cast, malleable cast, high-alloyed chromium steel such as stainless and acid resistant steel.
Twist drills DIN 345 type N HSS, HSS-G Co 5 and HSS-G Co 5 TiN
28
Ø mm
Total length mm
Flute length mm
Morse taper no.
Article no. HSS
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G Co 5 TiN
Cont. pcs.
10,00 10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00 18,50 19,00 19,50 20,00 20,50 21,00 21,50 22,00 22,50 23,00
168,0 168,0 175,0 175,0 182,0 182,0 182,0 189,0 189,0 212,0 212,0 218,0 218,0 223,0 223,0 228,0 228,0 233,0 233,0 238,0 238,0 243,0 243,0 248,0 248,0 253,0 253,0
87,0 87,0 94,0 94,0 101,0 101,0 101,0 108,0 108,0 114,0 114,0 120,0 120,0 125,0 125,0 130,0 130,0 135,0 135,0 140,0 140,0 145,0 145,0 150,0 150,0 155,0 155,0
1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
204 100 204 105 204 110 204 115 204 120 204 125 204 130 204 135 204 140 204 145 204 150 204 155 204 160 204 165 204 170 204 175 204 180 204 185 204 190 204 195 204 200 204 205 204 210 204 215 204 220 204 225 204 230
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
204 100 E 204 105 E 204 110 E 204 115 E 204 120 E 204 125 E 204 130 E 204 135 E 204 140 E 204 145 E 204 150 E 204 155 E 204 160 E 204 165 E 204 170 E 204 175 E 204 180 E 204 185 E 204 190 E 204 195 E 204 200 E 204 205 E 204 210 E 204 215 E 204 220 E 204 225 E 204 230 E
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
204 100 T 204 105 T 204 110 T 204 115 T 204 120 T 204 125 T 204 130 T 204 135 T 204 140 T 204 145 T 204 150 T 204 155 T 204 160 T 204 165 T 204 170 T 204 175 T 204 180 T 204 185 T 204 190 T 204 195 T 204 200 T 204 205 T 204 210 T 204 215 T 204 220 T 204 225 T 204 230 T
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Twist drills
« www.ruko.de » 1.01
Twist drills DIN 345 type N HSS, HSS-G Co 5 and HSS-G Co 5 TiN Ø mm
Total length mm
Flute length mm
Morse taper no.
Article no. HSS
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
Article no. HSS-G Co 5 TiN
Cont. pcs.
23,50 24,00 24,50 25,00 25,50 26,00 26,50 27,00 27,50 28,00 28,50 29,00 29,50 30,00 30,50 31,00 31,50 32,00 32,50 33,00 33,50 34,00 34,50 35,00 35,50 36,00 36,50 37,00 37,50 38,00 38,50 39,00 39,50 40,00 40,50 41,00 41,50 42,00 42,50 43,00 43,50 44,00 44,50 45,00 45,50 46,00 46,50 47,00 47,50 48,00 48,50 49,00 49,50 50,00 51,00 52,00 53,00 54,00 55,00 56,00 57,00 58,00 59,00 60,00
276,0 281,0 281,0 281,0 286,0 286,0 286,0 291,0 291,0 291,0 296,0 296,0 296,0 296,0 301,0 301,0 301,0 334,0 334,0 334,0 334,0 339,0 339,0 339,0 339,0 344,0 344,0 344,0 344,0 349,0 349,0 349,0 349,0 349,0 354,0 354,0 354,0 354,0 354,0 359,0 359,0 359,0 359,0 359,0 364,0 364,0 364,0 364,0 364,0 369,0 369,0 369,0 369,0 369,0 412,0 412,0 412,0 417,0 417,0 417,0 422,0 422,0 422,0 422,0
155,0 160,0 160,0 160,0 165,0 165,0 165,0 170,0 170,0 170,0 175,0 175,0 175,0 175,0 180,0 180,0 180,0 185,0 185,0 185,0 185,0 190,0 190,0 190,0 190,0 195,0 195,0 195,0 195,0 200,0 200,0 200,0 200,0 200,0 205,0 205,0 205,0 205,0 205,0 210,0 210,0 210,0 210,0 210,0 215,0 215,0 215,0 215,0 215,0 220,0 220,0 220,0 220,0 220,0 225,0 225,0 225,0 230,0 230,0 230,0 235,0 235,0 235,0 235,0
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5
204 235 204 240 204 245 204 250 204 255 204 260 204 265 204 270 204 275 204 280 204 285 204 290 204 295 204 300 204 305 204 310 204 315 204 320 204 325 204 330 204 335 204 340 204 345 204 350 204 355 204 360 204 365 204 370 204 375 204 380 204 385 204 390 204 395 204 400 204 405 204 410 204 415 204 420 204 425 204 430 204 435 204 440 204 445 204 450 204 455 204 460 204 465 204 470 204 475 204 480 204 485 204 490 204 495 204 500 204 510 204 520 204 530 204 540 204 550 204 560 204 570 204 580 204 590 204 600
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
204 235 E 204 240 E 204 245 E 204 250 E 204 255 E 204 260 E 204 265 E 204 270 E 204 275 E 204 280 E 204 285 E 204 290 E 204 295 E 204 300 E — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
204 235 T 204 240 T 204 245 T 204 250 T 204 255 T 204 260 T 204 265 T 204 270 T 204 275 T 204 280 T 204 285 T 204 290 T 204 295 T 204 300 T — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Twist drills
29
1.01
Twist drills DIN 340 TL 3000 HSS Co 5 ground with split point Point cut: helical point from Ø 3,0 mm with split point DIN 1412 C Point angle: 130° Helix angle: 40° Ø tolerance: h8 Surface: golden brown right hand cutting
Packing unit: Ø 2,5 mm up to 10,0 mm in plastic box of 10 Ø 10,5 mm up to 13,0 mm in plastic box of 5
Multirange drill consisting of cobalt alloyed heavy-duty high-speed steel with higher heat-resistance. Ideally suitable for drilling of materials that are middle, long-chipping and hard to work. Especially suitable for drilling deep holes. Covers in many areas type N, H and W. Applications: for steel alloyed and unalloyed up to approx. 1200 N/mm² strength, acid resistant steel, titanium, titanium alloy, cast iron, aluminium, aluminium alloy, copper, brass, bronze and further materials.
Ø mm
2,50 3,00 3,10 3,20 3,30 3,40 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,80 4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,60 5,70 5,80 5,90 6,00 6,10 6,20 6,30 6,40 6,50 6,60 6,70
30
Twist drills
Total length mm
95,0 100,0 106,0 106,0 106,0 112,0 112,0 112,0 112,0 119,0 119,0 119,0 119,0 119,0 126,0 126,0 126,0 126,0 126,0 132,0 132,0 132,0 132,0 132,0 132,0 139,0 139,0 139,0 139,0 139,0 139,0 139,0 148,0 148,0 148,0 148,0 148,0 148,0 148,0
Flute length mm
62,0 66,0 69,0 69,0 69,0 73,0 73,0 73,0 73,0 78,0 78,0 78,0 78,0 78,0 82,0 82,0 82,0 82,0 82,0 87,0 87,0 87,0 87,0 87,0 87,0 91,0 91,0 91,0 91,0 91,0 91,0 91,0 97,0 97,0 97,0 97,0 97,0 97,0 97,0
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
253 025 253 030 253 031 253 032 253 033 253 034 253 035 253 036 253 037 253 038 253 039 253 040 253 041 253 042 253 043 253 044 253 045 253 046 253 047 253 048 253 049 253 050 253 051 253 052 253 053 253 054 253 055 253 056 253 057 253 058 253 059 253 060 253 061 253 062 253 063 253 064 253 065 253 066 253 067
6,80 6,90 7,00 7,10 7,20 7,30 7,40 7,50 7,60 7,70 7,80 7,90 8,00 8,10 8,20 8,30 8,40 8,50 8,60 8,70 8,80 8,90 9,00 9,10 9,20 9,30 9,40 9,50 9,60 9,70 9,80 9,90 10,00 10,50 11,00 11,50 12,00 12,50 13,00
156,0 156,0 156,0 156,0 156,0 156,0 156,0 156,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 184,0 184,0 184,0 184,0 184,0 184,0 195,0 195,0 205,0 205,0 205,0
102,0 102,0 102,0 102,0 102,0 102,0 102,0 102,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 121,0 121,0 121,0 121,0 121,0 121,0 128,0 128,0 134,0 134,0 134,0
253 068 253 069 253 070 253 071 253 072 253 073 253 074 253 075 253 076 253 077 253 078 253 079 253 080 253 081 253 082 253 083 253 084 253 085 253 086 253 087 253 088 253 089 253 090 253 091 253 092 253 093 253 094 253 095 253 096 253 097 253 098 253 099 253 100 253 105 253 110 253 115 253 120 253 125 253 130
« www.ruko.de » Point cut: Point angle: Helix angle: Ø tolerance: Surface:
1.01
Twist drills DIN 340 type N HSS ground helical point 118° 20-30° h8 bright
right hand cutting
Packing unit: Ø 2,5 mm up to 10,0 mm in plastic box of 10 Ø 10,5 mm up to 13,0 mm in plastic box of 5
Highly efficient standard drill in long version. Suitable for deep hole drillings in all normal materials. High security against fracture. For deep hole drillings small forward feeds and frequent chip removal are necessary. Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/mm² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-sliver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Ø mm
2,50 3,00 3,10 3,20 3,30 3,40 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,80 4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,60 5,70 5,80 5,90 6,00 6,10 6,20 6,30 6,40 6,50 6,60 6,70
Total length mm
95,0 100,0 106,0 106,0 106,0 112,0 112,0 112,0 112,0 119,0 119,0 119,0 119,0 119,0 126,0 126,0 126,0 126,0 126,0 132,0 132,0 132,0 132,0 132,0 132,0 139,0 139,0 139,0 139,0 139,0 139,0 139,0 148,0 148,0 148,0 148,0 148,0 148,0 148,0
Flute length mm
62,0 66,0 69,0 69,0 69,0 73,0 73,0 73,0 73,0 78,0 78,0 78,0 78,0 78,0 82,0 82,0 82,0 82,0 82,0 87,0 87,0 87,0 87,0 87,0 87,0 91,0 91,0 91,0 91,0 91,0 91,0 91,0 97,0 97,0 97,0 97,0 97,0 97,0 97,0
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
203 025 203 030 203 031 203 032 203 033 203 034 203 035 203 036 203 037 203 038 203 039 203 040 203 041 203 042 203 043 203 044 203 045 203 046 203 047 203 048 203 049 203 050 203 051 203 052 203 053 203 054 203 055 203 056 203 057 203 058 203 059 203 060 203 061 203 062 203 063 203 064 203 065 203 066 203 067
6,80 6,90 7,00 7,10 7,20 7,30 7,40 7,50 7,60 7,70 7,80 7,90 8,00 8,10 8,20 8,30 8,40 8,50 8,60 8,70 8,80 8,90 9,00 9,10 9,20 9,30 9,40 9,50 9,60 9,70 9,80 9,90 10,00 10,50 11,00 11,50 12,00 12,50 13,00
156,0 156,0 156,0 156,0 156,0 156,0 156,0 156,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 165,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 175,0 184,0 184,0 184,0 184,0 184,0 184,0 195,0 195,0 205,0 205,0 205,0
102,0 102,0 102,0 102,0 102,0 102,0 102,0 102,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 109,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 115,0 121,0 121,0 121,0 121,0 121,0 121,0 128,0 128,0 134,0 134,0 134,0
203 068 203 069 203 070 203 071 203 072 203 073 203 074 203 075 203 076 203 077 203 078 203 079 203 080 203 081 203 082 203 083 203 084 203 085 203 086 203 087 203 088 203 089 203 090 203 091 203 092 203 093 203 094 203 095 203 096 203 097 203 098 203 099 203 100 203 105 203 110 203 115 203 120 203 125 203 130
Twist drills
31
1.01
Solid TC twist drills DIN 338 type N TiAIN coated with split point High performance solid carbide K 20 twist drill, especially well suited for high strength steels at high cutting speeds. Point cut: Point angle: Helix angle: Ø-tolerance: Surface: right hand cutting
helical point from Ø 3,0 mm with split point DIN 1412 C 118° 20-30° h8 TiAlN coating
Packing unit: in plastic box
Solid tungsten carbide K 20 twist drill with titanium aluminium nitride coating. The TiAlN wear-resistant coating increases the surface hardness to approx. 3,000 HV and the heat resistance to 900 °C. This helps to increase service lives and cutting rates by 50%. Application areas: for high strength steels up to 1200 N/mm², cast steel, grey iron, chilled cast iron, annealed cast iron, CrNi steels, titanium alloys, bronze, brass, copper, aluminium with high silicon content and abrasive plastics.
Ø mm
Total length mm
3,00 3,10 3,20 3,30 3,40 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,30 4,40 4,50 4,60 4,70 4,80 4,90
32
Twist drills
61,0 61,0 61,0 61,0 61,0 70,0 70,0 70,0 75,0 75,0 75,0 75,0 75,0 80,0 80,0 80,0 80,0 80,0 86,0 86,0
Flute length mm
33,0 36,0 36,0 36,0 39,0 39,0 39,0 39,0 43,0 43,0 43,0 43,0 43,0 47,0 47,0 47,0 47,0 47,0 52,0 52,0
Article no.
Cont. pcs.
Ø mm
Total length mm
Flute length mm
Article no.
Cont. pcs.
814 030 814 031 814 032 814 033 814 034 814 035 814 036 814 037 814 038 814 039 814 040 814 041 814 042 814 043 814 044 814 045 814 046 814 047 814 048 814 049
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
5,00 5,50 6,00 6,50 6,80 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,20 10,50 11,00 11,50 12,00 12,50 13,00
86,0 93,0 93,0 101,0 109,0 109,0 109,0 117,0 117,0 125,0 125,0 133,0 133,0 133,0 142,0 142,0 151,0 151,0 151,0
52,0 57,0 57,0 63,0 69,0 69,0 69,0 75,0 75,0 81,0 81,0 87,0 87,0 87,0 94,0 94,0 101,0 101,0 101,0
814 050 814 055 814 060 814 065 814 068 814 070 814 075 814 080 814 085 814 090 814 095 814 100 814 102 814 105 814 110 814 115 814 120 814 125 814 130
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1.01
« www.ruko.de »
Twist drills
33
1.01
Twist drills DIN 338 HSS ground "TURBO" High-performance twist drill, particularly suited to freehand drilling of thin-walled materials. Point cut: Center angle: Helix angle: Ø tolerance: Surface: right hand cutting
helical point 130° 56° h8 golden brown
Packing unit: in plastic box
Ground twist drill in high-performance high-speed steel. Drills very cleanly with burr-free hole edges. Immediate drilling start after insertion as no prepunching is necessary. Shatter stability is increased by up to 50% as the core diameter increases constantly in the direction of the shaft (from Ø 3,2 mm). Triple milled clamping areas prevent the drill from spinning in the machine (from Ø 5,0 mm). For use on: non-alloy and alloy steel (up to grade of approx. 900 N/mm² ), for drilling thin-walled profiles and sheeting up to 5,0 mm, plastics and wood.
Ø mm
Total length mm
1,00 1,50 2,00 2,50 3,00 3,20 3,30 3,50 4,00 4,10 4,20 4,50 4,80 5,00 5,10 5,20 5,40 5,50
34,0 40,0 49,0 57,0 61,0 65,0 65,0 70,0 75,0 75,0 75,0 80,0 86,0 86,0 86,0 86,0 93,0 93,0
Flute length mm
12,0 18,0 24,0 30,0 33,0 36,0 36,0 39,0 43,0 43,0 43,0 46,0 46,0 46,0 46,0 46,0 52,0 52,0
Article no.
Cont. pcs.
Ø mm
Total length mm
2146 010 2146 015 2146 020 2146 025 2146 030 2146 032 2146 033 2146 035 2146 040 2146 041 2146 042 2146 045 2146 048 2146 050 2146 051 2146 052 2146 054 2146 055
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
6,00 6,50 6,80 7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 11,80 12,00 12,50 13,00
93,0 101,0 109,0 109,0 109,0 117,0 117,0 125,0 125,0 133,0 133,0 142,0 142,0 151,0 151,0 151,0 151,0
Twist drill sets DIN 338 HSS ground "TURBO" in steel case and polystyrene case
34
Description
Article no.
19-piece set of twist drills DIN 338 HSS ground "TURBO" Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm in steel case
214 614
25-piece set of twist drills DIN 338 HSS ground "TURBO" Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm in steel case
214 615
19-piece set of twist drills DIN 338 "TURBO" Ø 1,0 mm up to 10,0 mm in increments of 0,5 mm in polystyrene case
214 614 RO
25-piece set of twist drills DIN 338 "TURBO" Ø 1,0 mm up to 13,0 mm in increments of 0,5 mm in polystyrene case
214 615 RO
Twist drills
Flute length mm
57,0 58,0 66,0 66,0 66,0 72,0 72,0 78,0 78,0 84,0 84,0 91,0 91,0 98,0 98,0 98,0 98,0
Article no.
Cont. pcs.
2146 060 2146 065 2146 068 2146 070 2146 075 2146 080 2146 085 2146 090 2146 095 2146 100 2146 105 2146 110 2146 115 2146 118 2146 120 2146 125 2146 130
10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5
« www.ruko.de » 1.01
Twist drills DIN 338 type N with reduced shank Ideally suitable for drilling largish drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm. Point cut: helical point Helix angle: 20-30° Ø tolerance: h8 right hand cutting
Packing unit:
in plastic box
HSS rolled
HSS ground
Point cut: Point angle: Surface:
Point cut: Point angle: Surface:
helical point 118° black, steam tempered
HSS Co 5 ground
with split point DIN 1412 C 118° bright
Point cut: Point angle: Surface:
with split point DIN 1412 C 130° golden brown
High performance rolled twist drill consisting of heavy-duty high speed steel. The material is strengthened by the rolled production process and is more resistant to fracture.
High performance ground twist drill consisting of heavy-duty high speed steel. The fully ground twist drill has a more precise concentricity.
Like HSS-G plus cobalt alloyed. The cobalt content ensures increased heat resistance.
Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 900 N/ mm²), grey, malleable, ductile and die-cast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
Application areas: for steel, alloyed and unalloyed cast iron (up to a strength of 900 N/mm²), grey, malleable, ductile and diecast iron, sintered iron, nickel silver, graphite, short chipping aluminium alloys, brass and bronze.
Application areas: for unalloyed and alloyed steel (up to a strength of 900 N/mm²), hot and cold-working steel, reinforced and casehardened steel and also steel resistant to rust and acid.
Twist drills DIN 338 type N with reduced shank HSS rolled, HSS ground and HSS Co 5 ground Ø mm
Total length mm
Shank Ø mm
Shank length mm
Article no. HSS-R
Cont. pcs.
Article no. HSS-G
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
10,50 11,00 11,50 12,00 12,50 13,00 13,50 14,00 14,50 15,00 15,50 16,00 16,50 17,00 17,50 18,00 18,50 19,00 19,50 20,00 22,00 24,00 25,00
133,0 142,0 142,0 151,0 151,0 151,0 160,0 160,0 169,0 169,0 178,0 178,0 184,0 184,0 191,0 191,0 198,0 198,0 205,0 205,0 205,0 205,0 205,0
10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0 13,0
30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 35,0 35,0 35,0 35,0 35,0 35,0 35,0 35,0 35,0 35,0 35,0
200 105 200 110 200 115 200 120 200 125 200 130 200 135 200 140 200 145 200 150 200 155 200 160 200 165 200 170 200 175 200 180 200 185 200 190 200 195 200 200 200 220 200 240 200 250
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
200 4 105 200 4 110 200 4 115 200 4 120 200 4 125 200 4 130 200 4 135 200 4 140 200 4 145 200 4 150 200 4 155 200 4 160 200 4 165 200 4 170 200 4 175 200 4 180 200 4 185 200 4 190 200 4 195 200 4 200 — — —
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — —
200 5 105 200 5 110 200 5 115 200 5 120 200 5 125 200 5 130 200 5 135 200 5 140 200 5 145 200 5 150 200 5 155 200 5 160 200 5 165 200 5 170 200 5 175 200 5 180 200 5 185 200 5 190 200 5 195 200 5 200 — — —
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 — — —
Twist drills
35
1.01
Twist drills DIN 1897 type N - short Ideally suitable for assembly work in thin-walled materials such as sheet steels, flat steels and profile steels. High security against fracture. For use in all hand-held drilling machines. Point cut: helical point Helix angle: 20-30° Ø tolerance: h8 right hand cutting Packing unit:
in plastic box
HSS rolled
HSS Co 5 ground
Point cut: helical point Point angle: 118° Surface: black, steam tempered
Point cut: from Ø 3,0 mm with split point DIN 1412 C Point angle: 135° Surface: golden brown
Short and stable rolled standard drill consisting of heavy-duty high speed steel.
Short and stable ground standard drill consisting of cobalt alloyed heavy-duty high-speed steel with higher heat-resistance.
Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/mm² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Applications: for steel and alloyed cast steel (up to a strength of 1100 N/mm²), grey cast, malleable cast, high-alloyed chromium steel such as stainless and acid resistant steel.
Twist drills DIN 1897 type N - short HSS rolled and HSS Co 5 ground
36
Ø mm
Total length mm
Flute length mm
Article no. HSS-R
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
2,00 2,10 2,20 2,30 2,40 2,50 2,60 2,70 2,80 2,90 3,00 3,10 3,20 3,25 3,30 3,40 3,50 3,60 3,70 3,80 3,90 4,00 4,10 4,20 4,25 4,30 4,40 4,50 4,60 4,70 4,80
38,0 38,0 40,0 40,0 43,0 43,0 43,0 46,0 46,0 46,0 46,0 49,0 49,0 49,0 49,0 52,0 52,0 52,0 52,0 55,0 55,0 55,0 55,0 55,0 55,0 58,0 58,0 58,0 58,0 58,0 62,0
12,0 12,0 13,0 13,0 14,0 14,0 14,0 16,0 16,0 16,0 16,0 18,0 18,0 18,0 18,0 20,0 20,0 20,0 20,0 22,0 22,0 22,0 22,0 22,0 22,0 24,0 24,0 24,0 24,0 24,0 26,0
202 020 202 021 202 022 202 023 202 024 202 025 202 026 202 027 202 028 202 029 202 030 202 031 202 032 — 202 033 202 034 202 035 202 036 202 037 202 038 202 039 202 040 202 041 202 042 — 202 043 202 044 202 045 202 046 202 047 202 048
10 10 10 10 10 10 10 10 10 10 10 10 10 — 10 10 10 10 10 10 10 10 10 10 — 10 10 10 10 10 10
202 020 E — — — — 202 025 E — — — — 202 030 E 202 031 E 202 032 E 202 0325 E 202 033 E 202 034 E 202 035 E 202 036 E 202 037 E 202 038 E — 202 040 E 202 041 E 202 042 E 202 0425 E — 202 044 E 202 045 E — 202 047 E 202 048 E
10 — — — — 10 — — — — 10 10 10 10 10 10 10 10 10 10 — 10 10 10 10 — 10 10 — 10 10
Twist drills
« www.ruko.de »
Ø mm
4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,60 5,70 5,80 5,90 6,00 6,10 6,20 6,30 6,40 6,50 6,60 6,70 6,80 6,90 7,00 7,10 7,20 7,30 7,40 7,50 7,60 7,70 7,80 7,90 8,00 8,50 9,00 9,50 10,00 10,20 10,50 11,00 11,50 12,00 12,50 13,00
1.01
Twist drills DIN 1897 type N - short HSS rolled and HSS Co 5 ground Total length mm
Flute length mm
Article no. HSS-R
Cont. pcs.
Article no. HSS-G Co 5
Cont. pcs.
62,0 62,0 62,0 62,0 62,0 66,0 66,0 66,0 66,0 66,0 66,0 66,0 70,0 70,0 70,0 70,0 70,0 70,0 70,0 74,0 74,0 74,0 74,0 74,0 74,0 74,0 74,0 79,0 79,0 79,0 79,0 79,0 79,0 84,0 84,0 89,0 89,0 89,0 95,0 95,0 102,0 102,0 102,0
26,0 26,0 26,0 26,0 26,0 28,0 28,0 28,0 28,0 28,0 28,0 28,0 31,0 31,0 31,0 31,0 31,0 31,0 31,0 34,0 34,0 34,0 34,0 34,0 34,0 34,0 34,0 36,0 36,0 36,0 36,0 36,0 36,0 40,0 40,0 43,0 43,0 43,0 47,0 47,0 51,0 51,0 51,0
202 049 202 050 202 051 202 052 202 053 202 054 202 055 202 056 202 057 202 058 202 059 202 060 202 061 202 062 202 063 202 064 202 065 202 066 202 067 202 068 202 069 202 070 202 071 202 072 202 073 202 074 202 075 202 076 202 077 202 078 202 079 202 080 202 085 202 090 202 095 202 100 — — — — — — —
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 — — — — — — —
202 049 E 202 050 E 202 051 E 202 052 E — — 202 055 E — 202 057 E 202 058 E 202 059 E 202 060 E — — — — 202 065 E — — 202 068 E — 202 070 E — — — — 202 075 E — — — — 202 080 E 202 085 E 202 090 E 202 095 E 202 100 E 202 102 E 202 105 E 202 110 E 202 115 E 202 120 E 202 125 E 202 130 E
10 10 10 10 — — 10 — 10 10 10 10 — — — — 10 — — 10 — 10 — — — — 10 — — — — 10 10 10 10 10 10 5 5 5 5 5 5
Twist drills
37
1.01
Centre drills DIN 333 HSS shape A, shape A with reinforcing bead and shape R Centre angle: 60° Point angle: 120° Ø tolerance: h9 right hand cutting Packing unit: in individual plastic pack
Shape A
Shape A with reinforcing bead
Shape R
For making centre holes according to DIN 332, Shape A.
For making centre holes according to DIN 332 shape A with recess at the crossover of countersink and drill.
For making centre holes with radius according to DIN 332 R.
Ø mm
Total length mm
0,80 1,00 1,60 2,00 2,50 3,15 4,00 5,00 6,30
20,0 31,5 35,5 40,0 45,0 50,0 56,0 63,0 71,0
Shank-Ø mm
Article no. Shape A
Article no. Shape A with reinforcing bead
Article no. Shape R
3,15 3,15 4,00 5,00 6,30 8,00 10,00 12,50 16,00
217 008 217 010 217 016 217 020 217 025 217 315 217 040 217 050 217 063
— 217 1 010 217 1 016 217 1 020 217 1 025 217 1 315 217 1 040 217 1 050 217 1 063
217 2 008 217 2 010 217 2 016 217 2 020 217 2 025 217 2 315 217 2 040 217 2 050 217 2 063
Hollow section twist drills works standard type N HSS ground Due to the short spiral shape the drill is particularly suitable for the working and fitting of hollow sections. The web thinning guarantees an optimized centring and long tool life.
Point cut: helical point DIN 1412 A Point angle: 118° Helix angle: 20-30° Ø tolerance: h8 Surface: black, steam tempered right hand cutting
Applications: Optimal drill for roofers, plumbers, window and front works.
Packing unit: in plastic box of 10
Ø mm
4,90 4,90 5,00 5,00 5,00 5,00 5,10 5,10 5,10 5,30 5,30
38
Twist drills
Total length mm
100,0 150,0 70,0 100,0 150,0 210,0 100,0 150,0 210,0 100,0 150,0
Flute length mm
30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0
Article no.
Ø mm
257 491 257 492 257 501 257 502 257 503 257 504 257 511 257 512 257 513 257 531 257 532
5,30 5,50 5,50 5,50 5,70 5,70 5,70 5,70 5,80 5,80 5,80
Total length mm
210,0 100,0 150,0 210,0 70,0 100,0 150,0 210,0 100,0 150,0 210,0
Flute length mm
30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0 30,0
Article no.
257 533 257 551 257 552 257 553 257 571 257 572 257 573 257 574 257 581 257 582 257 583
Spot drills HSS ground, extra short with split point Extra short and stable standard drill. Shorter than DIN 1897. Ideally suitable for assembly work in thin-walled materials such as sheet steels, flat steels and profile steels. High security against fracture. For use in all hand-held drilling machines. Advantages DIN 1412 C: good centring, little pressure required. Chip distribution improves chip removal.
Point cut: helical point from Ø 3,0 mm with split point DIN 1412 C Point angle: 135° Ø tolerance: h8 Surface: bright right hand cutting
1.01
« www.ruko.de »
Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/mm² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-siver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Packing unit: in plastic box of 10
Ø mm
Total length mm
Flute length mm
2,50 2,80 3,00 3,10 3,20 3,25 3,30 3,40 3,50 4,00 4,10 4,20
38,0 40,0 40,0 40,0 40,0 41,0 41,0 42,0 42,0 42,0 44,0 44,0
14,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 18,0 18,0
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
251 025 251 028 251 030 251 031 251 032 251 0325 251 033 251 034 251 035 251 040 251 041 251 042
4,30 4,50 4,70 4,80 4,90 5,00 5,10 5,20 5,50 6,00 6,50
44,0 48,0 48,0 48,0 50,0 52,0 52,0 52,0 52,0 55,0 60,0
18,0 20,0 20,0 20,0 22,0 24,0 24,0 24,0 24,0 26,0 26,0
251 043 251 045 251 047 251 048 251 049 251 050 251 051 251 052 251 055 251 060 251 065
Double end sheet metal drills HSS ground with split point Extra short and stable standard drill. Shorter than DIN 1897. Ideally suitable for assembly work in thin-walled materials such as sheet steels, flat steels and profile steels. High security against fracture. For use in hand-held drilling machines. Usable at both ends. Advantages DIN 1412 C: good centring, little pressure required. Chip distribution improves chip removal. Applications: for steel and cast-steel alloyed and unalloyed up to approx. 900 N/mm² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Point cut: helical point from Ø 3,0 mm with split point DIN 1412 C Point angle: 135° Ø tolerance: h8 Surface: bright right hand cutting
Packing unit: in plastic box of 10
Ø mm
Total length mm
Flute length mm
2,50 2,80 3,00 3,10 3,20 3,25 3,30 3,40 3,50 4,00 4,10
43,0 46,0 46,0 49,0 49,0 49,0 49,0 52,0 52,0 55,0 55,0
10,0 11,0 11,0 11,0 11,0 11,0 11,0 14,0 14,0 14,0 14,0
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
252 025 252 028 252 030 252 031 252 032 252 0325 252 033 252 034 252 035 252 040 252 041
4,20 4,30 4,50 4,80 4,90 5,00 5,10 5,20 5,50 6,00 6,50
55,0 58,0 58,0 62,0 62,0 62,0 62,0 62,0 66,0 66,0 70,0
14,0 17,0 17,0 17,0 17,0 17,0 17,0 17,0 20,0 20,0 20,0
252 042 252 043 252 045 252 048 252 049 252 050 252 051 252 052 252 055 252 060 252 065
Twist drills
39
1.01
Twist drills DIN 1869 TL 3000 HSS ground with split point, extra long Point cut: helical point from Ø 3,0 mm with split point DIN 1412 C Pont angel: 130° Helix angel: 40° Ø-tolerance: h8 Surface: bright / black
Packing unit: in individual plastic bags
right hand cutting
Stable special drill. Ideally suitable for deep holes under difficult conditions, e.g. work for bad chipping materials. Suitable for all usual drilling work in all normal materials. High rotational precision. For drilling deep holes please use small feed and deaerate chips often. Applications: for steel and cast-steel alloyed and unalloyed up to 900N/mm² strength, grey cast, malleable cast iron, die-cast metal, iron sinter, nickel-silver, graphite cast iron, short-chipping aluminium alloys, bronze and brass.
Ø mm
2,00 2,50 3,00 3,20 3,30 3,50 4,00 4,20 4,50 5,00 5,50 6,00 6,50 Ø mm
3,00 3,20 3,30 3,50 4,00 4,20 4,50 5,00 5,50 6,00 6,50 7,00 Ø mm
3,50 4,00 4,20 4,50 5,00 5,50 6,00 6,50 7,00 7,50 8,00
40
Twist drills
Total length mm
Flute length mm
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
125,0 140,0 150,0 155,0 155,0 165,0 175,0 175,0 185,0 195,0 205,0 205,0 215,0
85,0 95,0 100,0 105,0 105,0 115,0 120,0 120,0 125,0 135,0 140,0 140,0 150,0
254 020 254 025 254 030 254 032 254 033 254 035 254 040 254 042 254 045 254 050 254 055 254 060 254 065
7,00 7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00
225,0 225,0 240,0 240,0 250,0 250,0 265,0 265,0 280,0 280,0 295,0 295,0 295,0
155,0 155,0 165,0 165,0 175,0 175,0 185,0 185,0 195,0 195,0 205,0 205,0 205,0
254 070 254 075 254 080 254 085 254 090 254 095 254 100 254 105 254 110 254 115 254 120 254 125 254 130
Total length mm
Flute length mm
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
190,0 200,0 200,0 210,0 220,0 220,0 235,0 245,0 260,0 260,0 275,0 290,0
130,0 135,0 135,0 145,0 150,0 150,0 160,0 170,0 180,0 180,0 190,0 200,0
255 030 255 032 255 033 255 035 255 040 255 042 255 045 255 050 255 055 255 060 255 065 255 070
7,50 8,00 8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00
290,0 305,0 305,0 320,0 320,0 340,0 340,0 365,0 365,0 375,0 375,0 375,0
200,0 210,0 210,0 220,0 220,0 235,0 235,0 250,0 250,0 260,0 260,0 260,0
255 075 255 080 255 085 255 090 255 095 255 100 255 105 255 110 255 115 255 120 255 125 255 130
Total length mm
Flute length mm
Article no.
Ø mm
Total length mm
Flute length mm
Article no.
265,0 280,0 280,0 295,0 315,0 330,0 330,0 350,0 370,0 370,0 390,0
180,0 190,0 190,0 200,0 210,0 225,0 225,0 235,0 250,0 250,0 265,0
256 035 256 040 256 042 256 045 256 050 256 055 256 060 256 065 256 070 256 075 256 080
8,50 9,00 9,50 10,00 10,50 11,00 11,50 12,00 12,50 13,00
390,0 410,0 410,0 430,0 430,0 455,0 455,0 480,0 480,0 480,0
265,0 280,0 280,0 295,0 295,0 310,0 310,0 330,0 330,0 330,0
256 085 256 090 256 095 256 100 256 105 256 110 256 115 256 120 256 125 256 130
Twist drill grinding machine BSM 20 for subsequent grinding of twist drills, counter- and deburring sinkers Quick and simple handling Tried and tested, patented prism process Guaranteed maximum symmetry of cutting edges Grinds twist drills, also special shapes such as plate drills, wood drills. Also taper and deburring countersinkers.
Length: 370,0 mm Width: 310,0 mm Height: 260,0 mm Grinding wheel: Ø 125,0 x 20,0 x 20,0 mm Weight: ca. 22,0 kg Connection: 230 volt 50/60 Hz Motor: 230 volt, 0,12 kW, 2.800 r. p.m. Clamping range: Ø 1,0 up to 20,0 mm Clearance / vertex angle: infinetely adjustable
1.01
« www.ruko.de »
Packing unit: individual in carton
Description
Article no.
Twist drill grinding machine BSM 20, complete with corundum wheel
104 060
Cut chisel edge
Corrected major edge
Left-hand cutting
Split point
Grey cast iron
Centre point for metal and plastics
Centre point for wood
Tungsten carbide drills
Accessories for twist drill grinding machine BSM 20 Description
Article no.
Optical system with neon light
104 061
Grinding disk dresser
104 062
Corundum grinding wheel grain 60 Measurements Ø 125,0 x 20,0 x 20,0 mm (rough)
104 063
Corundum grinding wheel grain 80 Measurements Ø 125,0 x 20,0 x 20,0 mm (BSM standard)
104 064
Corundum grinding wheel grain 180 Measurements Ø 125,0 x 20,0 x 20,0 mm (fine)
104 065
Adapter for a additional grinding disk
104 066
Diamond wheel 3-sided covered D 76/3 125,0 mm for wood drills
104 067
Diamond wheel 3-sided covered D 76/3 125,0 mm for drills with tungsten carbide edges
104 068
Arbor for short spot weld millers 6,0 oder 8,0 mm
104 069
Sleeve for short morse taper drills (morse taper no. 1)
104 070
Sleeve for short morse taper drills (morse taper no. 2)
104 071
No. 104 061
No. 104 064
No. 104 067
Twist drills
41
1.01
Special accessories for twist drill grinding machine BSM 20 for subsequent grinding of countersinkers Description
Article no.
SVR 31 sink grinding device, basic equipment incl. 10,0 mm collet chuck for adapter
104 072
Collet chuck 6,0 mm for SVR 31
104 073
Collet chuck 8,0 mm for SVR 31
104 074
Collet chuck 12,0 mm for SVR 31
104 075
Nut for additional collet chuck
104 076
Curve for slotted taper and deburring countersinkers
104 077
Point angel 60° up to 90° Taper and deburring countersinkers with cylindrical shank Ø 7,0 mm up to 31,0 mm
Slotted taper and deburring countersinkers 90° Ø 2/5", 5/10", 10/15", 15/20"
No. 104 074
No. 104 072
No. 104 077
No. 104 076
The Drillgrind® precision drill-grinding set Motor speed: Power input: Power output: Supply voltage: Weight: Swing-over prism:
2.800 r.p.m. 70 Watt 50 Watt 220 volt / 50 Hz 9,0 kg 1,0 up to 20,0 mm
The Drillgrind® precision drill-grinding set from RUKO is ideal for all those who want to save costs and time. This Drillgrind® can sharpen and point twist drills, adjust point angles and sharpen drills with carbide cutting edges.
Packing unit: individual carton Description
Article no.
Drillgrind® precision drill grinding set incl. special screw clamp and high-grade corundum wheel
104 020
Drillgrind® accessories
42
Description
Article no.
Grinding disc dresser
104 021
Optical system for fine adjustment
104 022
High-grade corundum wheel Measurements Ø 125,0 x 20,0 x 20,0 mm
104 023
Silicium carbide wheel Measurements Ø 125,0 x 20,0 x 20,0 mm
104 024
Diamond wheel Ø 125,0 mm
104 025
Twist drills
No. 104 021
No. 104 024
Cutting speed Vc = m/min
Drills Ø mm
4
1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 11,0 12,0 13,0 14,0 15,0 16,0 17,0 18,0 19,0 20,0 21,0 22,0 23,0 24,0 25,0 26,0 27,0 28,0 29,0 30,0 31,0 32,0 33,0 34,0 35,0 36,0 37,0 38,0 39,0 40,0 41,0 42,0 43,0 44,0 45,0 46,0 47,0 48,0 49,0 50,0
1274 849 637 510 425 364 318 283 255 232 212 196 182 170 159 150 142 134 127 116 106 98 91 85 80 75 71 67 64 61 58 55 53 51 49 47 45 44 42 41 40 39 37 36 35 34 34 33 32 31 30 30 29 28 28 27 27 26 25
6
8
10
12
15
18
20
25
30
35
7962 5308 3981 3185 2654 2275 1990 1769 1592 1448 1327 1225 1137 1062 995 937 885 838 796 724 663 612 569 531 498 468 442 419 398 379 362 346 332 318 306 295 284 275 265 257 249 241 234 227 221 215 210 204 199 194 190 185 181 177 173 169 166 162 159
9554 6369 4777 3822 3185 2730 2389 2123 1911 1737 1592 1470 1365 1274 1194 1124 1062 1006 955 869 796 735 682 637 597 562 531 503 478 455 434 415 398 382 367 354 341 329 318 308 299 290 281 273 265 258 251 245 239 233 227 222 217 212 208 203 199 195 191
11146 7431 5573 4459 3715 3185 2787 2477 2229 2027 1858 1715 1592 1486 1393 1311 1238 1173 1115 1013 929 857 796 743 697 656 619 587 557 531 507 485 464 446 429 413 398 384 372 360 348 338 328 318 310 301 293 286 279 272 265 259 253 248 242 237 232 227 223
40
50
60
80
100
r.p.m.
1911 1274 955 764 637 546 478 425 382 347 318 294 273 255 239 225 212 201 191 174 159 147 136 127 119 112 106 101 96 91 87 83 80 76 73 71 68 66 64 62 60 58 56 55 53 52 50 49 48 47 45 44 43 42 42 41 40 39 38
2548 1699 1274 1019 849 728 637 566 510 463 425 392 364 340 318 300 283 268 255 232 212 196 182 170 159 150 142 134 127 121 116 111 106 102 98 94 91 88 85 82 80 77 75 73 71 69 67 65 64 62 61 59 58 57 55 54 53 52 51
3185 2123 1592 1274 1062 910 796 708 637 579 531 490 455 425 398 375 354 335 318 290 265 245 227 212 199 187 177 168 159 152 145 138 133 127 122 118 114 110 106 103 100 97 94 91 88 86 84 82 80 78 76 74 72 71 69 68 66 65 64
Material
High carbon struc. steel < 700 N/mm² High carbon struc. steel > 700 N/mm² Alloyed steel < 1000 N/mm² Cast iron < 250 N/mm² Cast iron > 250 N/mm² CuZn alloy brittle
3822 2548 1911 1529 1274 1092 955 849 764 695 637 588 546 510 478 450 425 402 382 347 318 294 273 255 239 225 212 201 191 182 174 166 159 153 147 142 136 132 127 123 119 116 112 109 106 103 101 98 96 93 91 89 87 85 83 81 80 78 76
4777 3185 2389 1911 1592 1365 1194 1062 955 869 796 735 682 637 597 562 531 503 478 434 398 367 341 318 299 281 265 251 239 227 217 208 199 191 184 177 171 165 159 154 149 145 141 136 133 129 126 122 119 117 114 111 109 106 104 102 100 97 96
5732 3822 2866 2293 1911 1638 1433 1274 1146 1042 955 882 819 764 717 674 637 603 573 521 478 441 409 382 358 337 318 302 287 273 261 249 239 229 220 212 205 198 191 185 179 174 169 164 159 155 151 147 143 140 136 133 130 127 125 122 119 117 115
Cutting speed Vc m/min
Coolant
30 - 35 20 - 25 20 - 25 15 - 25 10 - 20 60 - 100
cutting spray cutting spray cutting spray compressed air compressed air compressed air
6369 4246 3185 2548 2123 1820 1592 1415 1274 1158 1062 980 910 849 796 749 708 670 637 579 531 490 455 425 398 375 354 335 318 303 290 277 265 255 245 236 227 220 212 205 199 193 187 182 177 172 168 163 159 155 152 148 145 142 138 136 133 130 127
1.01
« www.ruko.de »
12739 15924 19108 25478 31847 8493 10616 12739 16985 21231 6369 7962 9554 12739 15924 5096 6369 7643 10191 12739 4246 5308 6369 8493 10616 3640 4550 5460 7279 9099 3185 3981 4777 6369 7962 2831 3539 4246 5662 7077 2548 3185 3822 5096 6369 2316 2895 3474 4632 5790 2123 2654 3185 4246 5308 1960 2450 2940 3920 4900 1820 2275 2730 3640 4550 1699 2123 2548 3397 4246 1592 1990 2389 3185 3981 1499 1873 2248 2997 3747 1415 1769 2123 2831 3539 1341 1676 2011 2682 3352 1274 1592 1911 2548 3185 1158 1448 1737 2316 2895 1062 1327 1592 2123 2654 980 1225 1470 1960 2450 910 1137 1365 1820 2275 849 1062 1274 1699 2123 796 995 1194 1592 1990 749 937 1124 1499 1873 708 885 1062 1415 1769 670 838 1006 1341 1676 637 796 955 1274 1592 607 758 910 1213 1517 579 724 869 1158 1448 554 692 831 1108 1385 531 663 796 1062 1327 510 637 764 1019 1274 490 612 735 980 1225 472 590 708 944 1180 455 569 682 910 1137 439 549 659 879 1098 425 531 637 849 1062 411 514 616 822 1027 398 498 597 796 995 386 483 579 772 965 375 468 562 749 937 364 455 546 728 910 354 442 531 708 885 344 430 516 689 861 335 419 503 670 838 327 408 490 653 817 318 398 478 637 796 311 388 466 621 777 303 379 455 607 758 296 370 444 593 741 290 362 434 579 724 283 354 425 566 708 277 346 415 554 692 271 339 407 542 678 265 332 398 531 663 260 325 390 520 650 255 318 382 510 637
Material
CuZn alloy tough Al alloy 11% Si Thermoplastics Duroplastics with inorganic filling Duroplastics with organic filling
Cutting speed Vc m/min
Coolant
35 - 60 30 - 50 20 - 40 15 - 25 15 - 35
compressed air cutting spray water compressed air compressed air
Twist drills
43
1.01
Drills Ø inch 1/16 5/64 3/32 7/64 1/8 9/64
5/32 11/64
3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2
Cutting speed Vc = m/min 4
6
8
10
15
18
20
25
30
35
40
50
60
4980 3980 3320 2840 2490 2210 1990 1810 1660 1530 1420 1330 1240 1190 1120 1060 1010 960 920 870 840 800 770 740 720 690 670 650 630
5970 4780 3980 3410 2990 2650 2390 2170 1990 1840 1710 1590 1490 1430 1350 1270 1210 1150 1100 1050 1010 970 930 890 860 830 800 780 750
6970 5570 4640 3980 3480 3100 2790 2530 2320 2140 1990 1860 1740 1660 1570 1490 1410 1340 1280 1220 1170 1130 1080 1040 1000 970 940 910 880
7960 6370 5310 4550 3980 3540 3180 2900 2650 2450 2270 2120 1990 1900 1790 1700 1610 1530 1460 1400 1340 1290 1240 1190 1150 1110 1070 1040 1000
9950 7960 6630 5690 4980 4420 3980 3620 3320 3060 2840 2650 2490 2380 2240 2120 2020 1920 1830 1750 1680 1610 1550 1490 1430 1380 1340 1290 1250
80
100
r.p.m.
800 640 530 450 400 350 320 290 270 240 230 210 200 190 180 170 160 150 150 140 130 130 120 120 110 110 110 110 110
1190 960 800 680 600 530 480 430 400 370 340 320 300 290 270 250 240 230 220 210 200 190 190 180 170 170 160 160 150
1590 1270 1060 910 800 710 640 580 530 490 450 420 400 380 360 340 320 310 290 280 270 260 250 240 230 220 210 210 200
1990 1590 1330 1140 1000 880 800 720 660 610 570 530 500 480 450 420 400 380 370 350 340 320 310 300 290 280 270 260 250
Material
High carbon struc. steel < 700 N/mm² High carbon struc. steel > 700 N/mm² Alloyed steel < 1000 N/mm² Cast iron < 250 N/mm² Cast iron > 250 N/mm² CuZn alloy brittle
44
12
Twist drills
2390 1910 1590 1360 1190 1060 960 870 800 730 680 640 600 570 540 510 480 460 440 420 400 390 370 360 340 330 320 310 300
2990 2390 1990 1710 1490 1330 1190 1090 1000 920 850 800 750 710 670 640 600 580 550 520 500 480 460 450 430 420 400 390 380
3580 2870 2390 2050 1790 1590 1430 1300 1190 1100 1020 960 900 860 810 760 730 690 660 630 600 580 560 540 520 500 480 470 450
Cutting speed Vc m/min
Coolant
30 - 35 20 - 25 20 - 25 15 - 25 10 - 20 60 - 100
cutting spray cutting spray cutting spray compressed air compressed air compressed air
3980 3180 2650 2270 1990 1770 1590 1450 1330 1220 1140 1060 1000 950 900 850 810 770 730 700 670 640 620 600 570 550 540 520 500
Material
CuZn alloy tough Al alloy 11% Si Thermoplastics Duroplastics with inorganic filling Duroplastics with organic filling
11940 15920 19900 9550 12740 15920 7960 10620 13270 6820 9100 11370 5970 7960 9950 5310 7080 8850 4780 6370 7960 4340 5790 7240 3980 5310 6630 3670 4900 6120 3410 4550 5690 3180 4250 5310 2990 3980 4980 2850 3800 4750 2690 3590 4490 2550 3400 4250 2420 3230 4030 2300 3070 3840 2200 2930 3660 2100 2800 3500 2010 2680 3350 1930 2570 3220 1860 2470 3090 1790 2380 2980 1720 2300 2870 1660 2220 2770 1610 2140 2680 1550 2070 2590 1500 2010 2510
Cutting speed Vc m/min
Coolant
35 - 60 30 - 50 20 - 40 15 - 25 15 - 35
compressed air cutting spray water compressed air compressed air