105
MIXER TABLE
MOD.
REF kg / Lb
M-80
65929
MIXERS
M-100
65930
M-100-L
73922
M-100-R
72934
M-120-R
72935
M-140-R
72936
M-160-R
72937
MR-80
65927
MR-100
65928
E-80
65939
E-80-2H
71956
ML-100
65931
ML-100-L 73921 65932
L-60
65933
L-80 L-100
65934
L-100-R
73938
L-120-R
73910
M-120 DUPLEX
25946
P-120-R
72954
10-15 kg 22-33,1 Lb 15-20 kg 33,1-44,1 Lb 15-20 kg 33,1-44,1 Lb 15-20 kg 33,1-44,1 Lb 15-25 kg 33,1-55,1 Lb 25-40 kg 55,1-88,2 Lb 30-60 kg 66,1-132,3 Lb 4-7 kg 8,8-15,4 Lb 7-15 kg 15,4-33,1 Lb 1-2 kg 2,2-4,4 Lb 2-5 kg 4,4-11 Lb 10-15 kg 22-33,1 Lb 10-15 kg 22-33,1 Lb 1-5 kg 2,2-11 Lb 5-15 kg 11-33,1 Lb 15-25 kg 33,1-55,1 Lb 15-25 kg 33,1-55,1 Lb 15-40 kg 33,1-88,2 Lb 30-50 kg 66,1-110,2 Lb 15-30 kg 33,1-66,1 Lb
Tile adhesive
RPM
W
200-500 200-500
500 700
200-500
700
200-500
700
200-500
950
200-500
1300
200-500
1500
200-500
400
200-500
500
300-500
700
300-500
700
200-500 200-500 500-1000 500-1000
500 500 300 400
200-500
500
200-500
500
200-500
950
480
1350
200-500
950
Paint / Liquids
mm / inch 400 mm 153/4” 400 mm 153/4” 760 mm 2915/16” 400 mm 153/4” 550 mm 2111/16” 550 mm 2111/16” 600 mm 2111/16” 400 mm 153/4” 550 mm 2111/16” 400 mm 153/4” 400 mm 153/4” 550 mm 2111/16” 760 mm 2915/16” 350 mm 1313/16” 400 mm 153/4” 550 mm 2111/16” 550 mm 2111/16” 600 mm 2111/16” 570 mm 187/16” 590 mm 231/4”
Ø mm / inch 80 mm 33/16” 100 mm 4” 100 mm 4” 100 mm 4” 120 mm 43/4” 140 mm 59/16” 160 mm 65/16” 80 mm 33/16” 100 mm 4” 80 mm 33/16” 80 mm 33/16” 100 mm 4” 100 mm 4” 60 mm 23/8” 80 mm 33/16” 100 mm 4” 100 mm 4” 120 mm 43/4” 120 mm 43/4” 110 mm 411/32”
Epoxi resin
Ø mm / inch 8 mm 5/16”
10 mm 13/32”
10 mm 13/32”
M14x2 M14x2 M14x2 M14x2 8 mm 5/16”
10 mm 13/32”
8 mm 5/16”
8 mm 5/16”
10 mm 5/16”
10 mm 5/16”
6 mm 11/32”
8 mm 5/16”
10 mm 5/16”
M14x2 M14x2 M27x1,5 M14x2 Gypsum Round finish
Quantity to be mixed
Material to be mixed
UPWARDS MOTION: The material rises through the inner section of the mixing paddle and falls on the outside. This motion allows for an homogeneous mixture of viscous materials such as mortar, cement, glue, etc. Less effort and easier use.
Recommended speed (RPM)
Minimum drill power (W)
Rod shape
Ø of mixer
Total length
Hexagonal finish Thread finish
PARALLEL MOTION: The mixture is done horizontally so the materials flow in both directions (up/down) depending on the movement of the paddle. This motion is recommended for resines, bicomponents, liquids, etc. It reduces the aumount of bubbles and lumps.
DOWNWARD MOTION: The material is pulled through the paddle’s head and rises through the exterior. This motion is recommended for materials with a low viscosity such as paint, sealers, plaster, etc...The lumps are dissolved without splashing.
COUNTER MOTION: Both paddles work simultaneously generating a more intense mixture. Recommended for resilient and viscous materials such as mortars. Only for dual- paddle mixers.