RACE WINNING
COMPONENTS
INTRO With seven World Championships won since 2010, Renthal cycle products are the choice of the performance rider. Renthal cycle products are designed, developed and manufactured at our facilities in Manchester, UK. We use the highest quality materials, engineering and craftsmanship, to provide you with premium parts that are the ultimate in lightweight and durability. Hit the trail at full speed on any Renthal product, confident that it has been manufactured by a company run by engineers with an obsession for engineering excellence and quality. Renthal. Competition Ready. Trail focused.
Front Cover : Troy Brosnan
// Specialized Racing
1
CONTENTS
S T EM S
HA NDL EB AR S
1 - 2 // Intro - Contents 3 - 4 // Fatbar Carbon 5 - 6 // Fatbar 7 - 8 // Fatbar Lite Carbon 9 - 10 // Fatbar Lite 11 - 12 // Integra 13 - 14 // Apex 15 - 16 // Duo 17 - 18 // SR4 MTB Chainrings 19 - 20 // Lock-On Grips 21 - 22 // BMX MOTO bars - Push-on Grips - Chainrings - Padded Cells
Aaron Gwin
// Specialized Racing
2
Thibaut Ruffin
3
// Commencal/Riding Addiction
UD Carbon Construction - The Fatbar Carbon uses a full UD carbon construction. Efficient placement and orientation of the unidirectional carbon fibers maximizes the strength and stiffness of the handlebar. Ride Tuned - The UD (unidirectional) carbon fibers are layered and aligned to give specific flex characteristics. The stiffness of the Fatbar Carbon results in incredible control, yet careful tuning gives the perfect level of comfort.
Center Profile - The 31.8mm central section extends much further than most other handlebars. Widening the span of this oversized section vastly increases the strength and stiffness of this 780mm wide, DH race ready handlebar.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M133
10mm
780mm
7°
5°
225g
M134
20mm
780mm
7°
5°
225g
M135
30mm
780mm
7°
5°
225g
M136
40mm
780mm
7°
5°
225g
4
7 Series Aluminum - The Renthal Fatbar is constructed from exclusive, high strength, 7 series aluminum. The material and specific heat treatment processes have been carefully selected to give the ultimate in strength and durability. Surface Treatment - Millions of tiny steel shot are blasted at high velocity at the Fatbar, vastly increasing the fatigue life. The hard anodized surface finish is abrasion resistant, to keep your Fatbar looking fresh. Race Proven - The Fatbar is raced by the world’s fastest athletes and is proven at the very top level of competition. Six World Championship gold medals have been won using the Renthal Fatbar.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M110
10mm
780mm
7°
5°
355g
M109
20mm
780mm
7°
5°
360g
M117
30mm
780mm
7°
5°
365g
M108
38mm
780mm
7°
5°
365g
5
SPEC Aaron Gwin
// Specialized Racing
6
Neil Donoghue
7
// SPS Racing
UD Carbon Construction - The Fatbar Lite Carbon uses a full UD carbon construction. Efficient placement and orientation of the unidirectional carbon fibers maximize strength, while keeping weight to an absolute minimum. Ride Tuned - The UD (unidirectional) carbon fibers are layered and aligned to give specific flex characteristics, unique to the Fatbar Lite Carbon. This trail-proof handlebar is built to maximize control and comfort.
Trail Geometry - A full 740mm trail width gives ample control in the most extreme trail conditions. Four rise options allow you to choose the right bar for your body size, your riding style and your bike set-up.
Part Number
Rise
M128
10mm
M129
20mm
M130
30mm
M131
40mm
SPEC Width
Backsweep
Upsweep
Weight
740mm
7°
5°
180g
740mm
7°
5°
180g
740mm
7°
5°
180g
740mm
7°
5°
180g
8
Taperwall Tubing - The Renthal Fatbar is constructed from exclusive, high strength, 7 series aluminum. An optimized, taperwall tube is used to minimize weight, while maintaining maximum strength and durability. Surface Treatment - Millions of tiny steel shot are blasted at high velocity at the Fatbar Lite, vastly increasing the fatigue life. The hard anodized surface finish is abrasion resistant, to keep your Fatbar Lite looking fresh. Trail Geometry - A full 740mm width gives ample control in the most extreme trail conditions. Four rise options allow you to choose the right bar for your body size, riding style and bike set-up.
Part Number
Rise
Width
Backsweep
Upsweep
Weight
M118
10mm
740mm
7°
5°
269g
M119
20mm
740mm
7°
5°
269g
M120
30mm
740mm
7°
5°
271g
M121
38mm
740mm
7°
5°
272g
9
SPEC Neil Donoghue
// SPS Racing
10
Richie Rude
11
// Yeti Fox
CNC Machined - The Renthal Integra is fully CNC machined from a solid billet of 6082 T6 aluminum.
Six Bolt Configuration Just six bolts are used, instead of the normal eight, vastly reducing overall weight.
Ultra Wide - The 64mm wide, u-shape clamp gives superior strength, structural stability and handlebar support.
Part Number
Offset
Weight
Rise
Mounting
Clamp Diameter
Clamp Width
STM-200
45/50mm
138g
0
Boxxer/Fox IS mount
31.8mm
64mm
12
AP E X CNC Machined The Renthal Apex is CNC’d from solid billet 2014 aluminum with 7075 aluminum clamps.
240° Clamps - Twin clamps give a unique 240° wrap of the handlebar and help vastly reduce overall stem weight.
O.S. Center Bore The unique clamping system allows for an oversize center bore to increase stiffness and strength.
Part Number
Length
Weight
Rise
Stack Height
Clamp Diameter
Steerer Clamp
STM-101
40mm
118g
+/- 6°
40mm
31.8mm
28.6mm
STM-102
50mm
127g
+/- 6°
40mm
31.8mm
28.6mm
STM-103
60mm
136g
+/- 6°
40mm
31.8mm
28.6mm
STM-104
70mm
140g
+/- 6°
40mm
31.8mm
28.6mm
STM-105
80mm
149g
+/- 6°
40mm
31.8mm
28.6mm
STM-106
90mm
158g
+/- 6°
40mm
31.8mm
28.6mm
13
AP E X CO P Y
S PEC Jared Graves
// Yeti Fox
14
DUO
Jared Graves
15
// Yeti Fox
D U O COP Y
S PEC
CNC Machined The patented Renthal Duo is fully CNC machined from a solid billet of 6082 T6 aluminum.
Split Stem Design Horizontally dividing the stem allows access to the core, to remove the maximum material possible.
U-Shape Clamp An uninterrupted clamping area cradles the underside of the handlebar, eliminating stress risers.
Part Number
Length
Weight
Rise
Stack Height
Clamp Diameter
Steerer Clamp
STM-100
50mm
143g
10째
40mm
31.8mm
28.6mm
STM-109
40mm
124g
10째
40mm
31.8mm
28.6mm
16
MCR104 MCR100
Hard Anodized finish
Hard Anodized finish
CNC Machined
CNC Machined
7075 Aluminum
7075 Aluminum
8,9 & 10 speed compatible
8,9 & 10 speed compatible
120mm BCD
104mm BCD
36T = 40g
32T = 35g
36, 37, 38 teeth available
32 to 44 teeth range
Offset tooth bed
CNC Machined - The Renthal SR4 is fully CNC machined from solid, 5mm thick, 7075 T6 aluminum plate.
Ultra Durable - Full width tooth profile and hard anodized surface coating vastly increases durability.
17
Ultra Stiff - The 5mm thick, I-beam section gives the ultimate combination of strength, stiffness and lightweight.
SPEC 18
19
LO CK -O N C OP Y
// Super Comfort G122
// Soft
// Medium
G118
G119
// Kevlar® G121
Grip the Technology
tm
Integrated Collars - Permanently integrating the aluminum collars into the grip body eliminates any movement that can develop over time.
Four Compounds - Four different compounds are available to perfectly match a grip to your preferences and riding style.
Kevlar® Compound - The Kevlar® brand resin contained within these grips gives three times the durability of a similar soft compound grip.
Tapered End Profile - The tapered transition between the grip and the end collar gives the ultimate in comfort
Part Number
Compound
G119
Medium
G118
Soft
G122
Super Comfort
G121
Kevlar
®
S PE C Tackiness
Absorption
★★★★
★★★★
★★★
★★★★★ ★★★★
Control
★★★
★★★★
★★★★★
★★★★★
★★
★★
★★★★
20
Durability ★★★
★★★★★
★★★★
★★★★
KEVLAR® is a registered trademark of E.I du Pont de Nemours and Company
MOTO BMX Handlebars
7 Series Aluminum - The Renthal MOTO is constructed from exclusive, high strength, 7 series aluminum. The material, butting and specific heat treatment processes have been carefully selected to give the ultimate in strength and durability.
Modular Construction - The all-aluminum construction uses two single bolt clamps and a brace bar. Incredibly light, compared to a welded chromoly bar, the MOTO also boasts the strength and stiffness needed for BMX racing.
Surface Treatment - Millions of tiny steel shot are blasted at high velocity at the MOTO, vastly increasing the fatigue life. The hard anodized surface finish is abrasion resistant, to keep your MOTO looking fresh.
Set-Up and Graphics - A detailed, laser marked set-up grid ensures you can set your preferred angle accurately. Chemically applied, oven cured permanent graphics provide a subtle aesthetic look to coordinate with any bike.
Part Number
Name
Rise
Width
Backsweep
Upsweep
Weight
M114
MOTO 24
140mm / 5.5in
699mm / 27.5in
12°
1°
547g
M115
MOTO 20
190mm / 7.5in
711mm / 28in
12°
1°
611g
M116
MOTO 20XL
210mm / 8.25in
736mm / 29in
12°
1°
638g
21
4X Chainwheel (MCR102)
BMX Chainwheel (MCR101)
Hard Anodized finish
Hard Anodized finish
CNC Machined
CNC Machined
7075 Aluminum
7075 Aluminum
8,9 & 10 speed compatible
3/32” & 1/8” chain
23.8mm axle hole w/ alloy adaptors for 19mm & 22mm axles
23.8mm axle hole w/ alloy adaptors for 19mm & 22mm axles
34T = 90g
28T = 55g
34,36,38,40,42,44 teeth available
25,27,28,30,32 teeth available
Push-On Grips
// Kevlar
// Soft
G117
Part Number
Compound
G116
Firm
G115
Medium
G114
Soft
G117
Kevlar
®
// Medium
G114
Tackiness
Absorption
★★★
★★★
★★
★★★★
★★★★
// Firm
G115
Durability
★★
★★★★★
★★★★
★★★
★★★★
G116
Control
★★★★★
★★★★
★★★★★
★★★★★
★★★★
★★★★
Renthal Grip Glue available - G101
Padded Cell
The Padded Cell is a durable, low profile frame protector. Double stitching and hook and loop closure ensures it stays in place. Choose from four sizes to accurately fit your frame.
Part Number
Size
Length
Min Circumference
Max Circumference
MBA-CSP-XS
X-Small
250mm
50mm
80mm
MBA-CSP-S
Small
250mm
60mm
100mm
MBA-CSP-M
Medium
250mm
85mm
140mm
MBA-CSP-L
Large
250mm
110mm
180mm
22
KEVLAR® is a registered trademark of E.I du Pont de Nemours and Company
www.renthalcycling.com This symbol, Renthal速 and Fatbar速 are registered trademarks of Renthal Ltd. UK