Tecnare 2012 by RSP Music IvanKorchak

Reinventing The Rules

INDEX Company

References

PCC Technology

Ibiza One Series

22 26 32 38 44 50 56 60 64 70

IBZA P204 IBZA6 IBZA10 IBZA15 Megadisco Array IBZA1561 SW118H W115 SW12 Minisub SW215

V Series

78 84 90

V10 V12 V15

Array Series

Mini Array LA208 LA122 LA312 SW118M SW218V

98 102 108 114 120 126

AMS Series

132

134 140 146

AMS12 AMS15 SW218V

Electronics

Tecnare | 2

152

Tecnare | 3

Founded in 1985 State of Art factory located in the heart of Spain

Tecnare | 4

Tecnare | 5

Ultraflexible installations

Tecnare | 6

Tecnare | 7

Ultimate reference in premier class dance clubs

Tecnare | 8

Tecnare | 9

Global leaders in DSP speaker box networking since 2002

World class reference installations on DSP self powered networking speakers Tecnare | 10

Tecnare | 11

User friendly software control High end speaker technology

Tecnare | 12

Tecnare | 13

PCC

Technology

PCC Technology is the future in the evolution of the concept of sound reinforcement, based on the application of computer digital management advantages to professional audio reinforcements. With this revolutionary technique the entire concept of the speaker box is completely replaced by the idea that each loudspeaker, from a line array to a small monitor, changes to be an active device, namely a PCC speaker, controlled with a small laptop via software.

Tecnare | 14

Tecnare | 15

PCC

Technology

A standard PCC speaker houses one or more module amps and a DSP processor. All these PCC speakers are linked by a network through a USB interface to the laptop, or wireless via Bluetooth. Once connected, we can control in real time the parameters of each speaker indiviually or grouped as we decide, factors such as volume, graphic equalisation, parametric equalisation, crossover, box delay, clock settings, internal delays, compressorlimiters, check test, save and recall of presets, mute, transfer spectrum analysis, r.t.a. spectrum control, phase check, and more!

Cant you imagine, when working with a line array system, adjusting differently the array elements used for downfill to the ones used on top of the line, ONLY with the help of a small laptop? And what about also controlling your monitors using ONLY a small laptop... while on the same screen a very powerful audio tool is monitoring the audio response? Using this technology, you can forget about racks, eqs, crossovers, patches, etc.. That is all in the past!

Tecnare | 16

Tecnare | 17

PCC

SOFTWARECONTROL Matrix, Parametric Equalizer, Graphic Equalizer, Crossover, Network, Response & Analyzer Screens.

ORIGINAL Series

Tecnare | 18

• Input graphic eq. • Input parametric eq (10 bands). • 4 band crossover. • Gain control. • Mute control. • Check test. • Buit in Analyzer (impulse, transfer, rta, etc). • Real time control. • Presets storage in the PC. • Grouping. • Acoustic center control, between bands. • Compressor / limiter in each band.

COBRANET Series

• Cobranet protocol. • Input graphic eq. • Parametric eq on each band (4 x 6 bands). • General Delay. • 4 band crossover. • Gain control. • Mute control. • Check test. • Buit in Analyzer. • Real time control. • Presets storage in the PC. • Grouping. • Acoustic center control, between bands. • Compressor / limiter in each band.

ADVANCED Series

• Ethernet control. • 10 built in presets without the use of the software. • Unlimited presets storage in the PC. • Input graphic eq. • Parametric eq on each band (4 x 8 bands). • General Delay. • 4 band crossover. • Gain control. • Mute control. • Check test. • Buit in Analyzer. • Real time control. • Presets storage in the PC. • Grouping. • Acoustic center control, between bands. • Compressor / limiter in each output band. • Input compressor / limiter. • Clock set.

Tecnare | 19

IBIZA ONE Series is the ultimate reference for dance clubs environments. A combination of high-end audio, sound quality, stunning aesthetics, extreme sound pressure level and reliability.

Once connected, we can control in real time

IBIZA ONE is a family of self-powered DSP

the parameters of each speaker such as volume,

networking loudspeaker systems, engineered

graphic equalisation, parametric equalisation,

for dance environments, where high-output,

crossover, internal delays, compressor-limiters,

low-distortion, and the highest quality sound

check test, save and recall of presets, mute,

are required.

transfer spectrum analysis, r.t.a. spectrum con-

It offers unbeatable audio performance, ad-

IBIZA ONE Series

P204 / IBZA6 / IBZA10 / IBZA15 Megadisco / IBZA1561 / SW118H SW115 / SW12MiniSub SW215

trol, phase check, and more!

vanced Pcc technology features including net-

Consisting of ten models, and suitable for

working and software control on each speaker.

portable or fixed installation dance sound rein-

IBIZA ONE Series are synonymous with ex-

forcement applications, the IBIZA ONE Series

ceptional sound quality and reliability, designed

has set the standard for professional disco loud-

for the most discerning DJ and audio systems

speaker systems.

contractor. PCC Technology transforms a standard powered speaker into an active device, namely a PCC speaker, controlled with a small laptop via software. A standard PCC speaker houses one or more module amps and a DSP processor. Allz these PCC speakers are linked by a network through a USB interface to the laptop. Photo Model / IBZA15

Photo Model / IBZA P204

Photo Model / IBZA1561 Photo Model / SW12 MiniSub

APPLICATIONS Dance clubs. Theatre and corporate events. Houses of Worship. Touring. Live music venues.

Tecnare | 20

Tecnare | 21

The P204 is a 16 Ohm compact full range weatherproof plastic loudspeaker, designed to be used as a sound reinforcement speaker in a wide variety of audio applications. The double high sensitivity 4” and the 25mm silk soft dome tweeter produce full range sound quality for foreground or background music, being voiced for maximum speech clarity and intelligibility. The enclosure includes a special mounting bracket with an adjustable splay angle of 10° vertically. The 3 support base provided by the flat bottom surface of the cabinet, allows also the speaker to be set on a surface such as a shelf.

IBZA P204

IBZAP204

ENGINEERING SPECIFICATIONS Frequency Response: 80 Hz – 20 kHz ±4dB, measured on axys. Nominal Dispersion: 120°H x 120°V@6db points.

IBIZA ONE Series

Impedance: 16 Ohm. Sensitivity: 91 dB (1w/1m). Calculated Max Spl: 110 dB continuous /116 peak. Power Handling: #80 W nominal. *160 W continuos. Dimensions (HxWxD): 182x182x320 mm. Net Weight: 4,5 kg. Components: 2x4” LF driver, 1x25mm. Construction: Weatherproof plastic. Finished in white. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

# 2 hours test made with continuous pink. noise signal (6 dB crest factor). * Power calculated on rated minimum impedance. * Power on Continuous Program is defined as 3 dB greater than the nominal rating.

Tecnare | 22

Tecnare | 23

IBZAP204

Accessories

IBIZA ONE Series

DATASHEET

IBZAP204

FREQUENCY RESPONSE & MINIMUM PHASE

HORIZONTAL COVERAGE

IBZA P204 Bracket

VERTICAL COVERAGE

Tecnare | 24

Tecnare | 25

The IBZA6 is a small trapezoidal compact full range loudspeaker of studio quality, designed to be used in a wide variety of audio applications as a small sound reinforcement unit. The enclosure design allows for installation very close to walls and ceilings making it an ideal choice for under balcony, column, or wall mounting. The IBZA6 is a versatile, two-way passive system designed for applications where high output is required from an ultra-compact enclosure. It features a long-excursion, 6 ½ “low frequency driver and

IBZA6 a tweeter. The combination exhibits smooth power response resulting in extremely natural voicing. It has been designed for use as stand-alone full-range speaker or together with a passive sub-woofer (e.g. the SW12MiniSub). The box houses multiple internal rigging points for ground-support, truss and wall mounting, pole mount socket, and Speakon NL4 connectors.

IBIZA ONE Series

IBZA6

ENGINEERING SPECIFICATIONS Frequency Response: 82 Hz – 20 kHz ±4dB, measured on axys. Nominal Dispersion: 80°H x 80°V@-6db points. Impedance: 8 Ohm. Sensitivity: 93 dB (1w/1m). Calculated Max Spl: 114 dB continuous /120 dB peak. Power Handling: #110 W nominal. *220 W continuos. Dimensions (HxWxD): 332x213x206 mm. Net Weight: 6 kg. Components: 1x6 1/2” LF driver, 1x tweeter. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M6 rigging points.

Tecnare | 26

Tecnare | 27

IBZA6

Accessories

DATASHEET

IBZA6

IBIZA ONE Series

L-IBZA6

FREQUENCY RESPONSE & MINIMUM PHASE

HORIZONTAL COVERAGE

2x IBZA6

Tecnare | 28

Tecnare | 29

IBZA6

IBZA ONE Series

INSTALLATIONDIAGRAMS

IBZA6 + SW12Minisub

4 IBZA6 + 1 SW12Minisub

12 AMS12 + 4 SW218V

Tecnare | 30

Tecnare | 31

The IBZA10 is a trapezoidal compact full range loudspeaker, which houses a long excursion 10” and high frequency 1 inch compression driver. It has a highly extended bass performance for such a small volume, with a well-balanced mid and high section. This two-way system is designed for applications where high output is required from a compact enclosure. It has been designed for use as stand-alone full-range speaker or together with a passive sub woofer (E.G. the SW115).

IBIZA ONE Series

The horn can be rotated through 90° in order to swap the horizontal and vertical dispersion patterns.

IBZA10 The box houses multiple internal rigging points for ground-support, truss and wall mounting, pole mount socket, and Speakon NL4 connectors. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially grills. The system’s choice can be passive (IBZA10), and self-powered with remote PC control (IBZA10 PCC). IBZA10 PCC is self-powered with two way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters.

IBZA10

ENGINEERING SPECIFICATIONS Frequency Response: 56 Hz – 18 kHz ±4dB, measured on axys. Nominal Dispersion: 70°H x 50°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 97 dB (1w/1m). Calculated Max Spl: 123 dB continuous /129 dB peak. Power Handling: #360 W nominal. *650 W continuos. Dimensions (HxWxD): 500x303x320 mm. Net Weight: 20 kg selfpowered Pcc version. Components: 1x10” LF driver, 1x1’’ HF driver on a rotatable exponential horn. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Impulse response, phase response and polar plot analysis are also available.

Tecnare | 32

Tecnare | 33

IBZA10

Accessories

DATASHEET

IBZA10

IBIZA ONE Series

L-IBZA10

FREQUENCY RESPONSE & MINIMUM PHASE

HORIZONTAL COVERAGE

LP-IBZA10

Tecnare | 34

Tecnare | 35

IBZA10

IBZA ONE Series

INSTALLATIONDIAGRAMS

4 IBZA10 + 2 SW12Minisub

4 IBZA10 + 1 SW115

Tecnare | 36

Tecnare | 37

IBIZA ONE Series

The IBZA15 is a trapezoidal full range loudspeaker high performance, wide-bandwidth system in a compact and efficient package. Extended frequency response is provided by a bass reflex tuned 15 inch LF driver and a 1.4 inch exit compression driver mounted on a 80° x 50° constant directivity HF horn.

IBZA15

ENGINEERING SPECIFICATIONS

This two-way system is designed for applications where very high output is required from a compact enclosure. It has been designed for use as stand-alone full-range speaker or together with a passive sub woofer (E.G. the SW215).

Frequency Response: 48 Hz – 18 kHz ±4dB, measured on axys.

The box houses multiple internal rigging points for ground-support, truss and wall mounting, pole mount socket, and Speakon NL4 connectors.

Impedance: 8 Ohm.

The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially grills. The system’s choice can be passive (IBZA15), and self-powered with remote PC control (IBZA15 PCC). IBZA15PCC is self-powered with two way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, the four of them without using the software, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation.

Nominal Dispersion: 80°H x 50°V@-6db points.

Sensitivity: 101 dB (1w/1m). Calculated Max Spl: 129 dB continuous /135 dB peak. Power Handling: #650 W nominal. *1000 W continuos. Dimensions (HxWxD): 633x455x483 mm. Net Weight: 33 kg selfpowered Pcc version. Components: 1x15” LF driver, 1x1.4’’ HF driver on a CD horn. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points.

The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

Tecnare | 38

Tecnare | 39

IBZA15

Accessories

DATASHEET

IBZA15

IBIZA ONE Series

L-IBZA15

FREQUENCY RESPONSE & MINIMUM PHASE

HORIZONTAL COVERAGE

On a wall-IBZA15

LP-IBZA15

Tecnare | 40

Tecnare | 41

IBZA15

IBZA ONE Series

INSTALLATIONDIAGRAMS

4 IBZA15 + 2 SW215

2 IBZA15 + 1 SW215

Tecnare | 42

Tecnare | 43

Megadisco Array

The IBZA MEGADISCO is a high performance trapezoidal full range loudspeaker, wide-bandwidth system, specially developed for large nightclub applications. It can be used both as stand alone unit or clustered into array configurations, both horizontal and vertical, as mid-high section is rotatable.

MegadiscoArray ENGINEERING SPECIFICATIONS

Frequency Response: 42 Hz – 22 kHz ±4dB, measured on axys. Nominal Dispersion: 90°H x 40°V@-6db points. Rotatable mid high section allows swap of horizontal and vertical pattern.

IBIZA ONE Series

Impedance: 8 Ohm. Sensitivity: 105 dB (1w/1m). Calculated Max Spl: 135 dB continuous /141 dB peak. Power Handling: #775 W nominal. *1550 W continuos. Dimensions (HxWxD): 890x520x550 mm. Box can be rigged both horizontal or vertical, as mid-high section can be rotated.

Extended frequency response is provided by a horn loaded 15 inch (380mm) LF driver, charged with a proprietary phase device attached to the speaker, a 2 inch exit compression driver mounted on a 90° x 40° constant directivity HF horn, and 4 angled tweeters sprayed to match the required pattern coverage. Box design allows 90º rotation of mid-high section. In this way IBZA MEGADISCO can be rigged either horizontally or vertically, depending on the application required. This three way system is designed for applications where very high output is required from a compact enclosure. It has been designed for use as mid-high enclosure combined with a subwoofer (e.g. the SW215 or SW118H). The box houses rigging hardware to be used both in horizontal and array configurations, as well as multiple internal rigging points for ground-support, truss and wall mounting, handles, pole mount socket, and Speakon NL8 connectors. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system’s choice can be passive (IBZA MEGADISCO), and self-powered with remote PC control (IBZA MEGADISCO PCC). IBZA MEGADISCO PCC is self-powered with two way amplification and controlled by a DSP built inside, (PCC Original or PCC Advanced Series)

Tecnare | 44

Net Weight: 49 kg passive. 56 kg selfpowered Pcc version.

with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, the four of them, without using the software, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation.

Components: 1x15” LF driver phase corrected, 1x2’’ HF, 4x TWEETER on a rotatable mid-high section. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points and array hardware.

Tecnare | 45

MegadiscoArray

Accessories

DATASHEET

Megadisco Array

FBVM15

IBIZA ONE Series

LPM15

FREQUENCY RESPONSE & MINIMUM PHASE

CV 12 M15

LM15

HORIZONTAL COVERAGE

FBHM15

HVM15

HSM15

Tecnare | 46

Tecnare | 47

MegadiscoArray

IBZA ONE Series

INSTALLATIONDIAGRAMS

2x Megadisco Array + 2x SW215

2x Megadisco Array

4x Megadisco Array + 4x SW215

2x Megadisco Array + 2x SW118H

Tecnare | 48

12x Megadisco Array + 8x SW215

Tecnare | 49

IBZA1561 The IBZA 1561 is a full range high output 3 way speaker comprising the highest requirement for quality, response and spl level. Speaker houses a 15” driver charged with a proprietary horn including a phase corrector device attached to the speaker, a 6 ½”mid-high horn loaded and phase corrected speaker plus a 1” exit HF compression driver, offering an unprecedented ﬁdelity, clarity, purity, and breathtaking, even at highs SPLs.

IBIZA ONE Series

ENGINEERING SPECIFICATIONS Frequency Response: 42 Hz – 19 kHz ±4dB, measured on axys. Nominal Dispersion: 60°H x 35°V@-6db points. Rotatable mid high section allows swap of horizontal and vertical pattern.

System can be supplied in mono, bi or triamplified way, as well as in selfpowered active version (PCC). The IBZA 1561 can be used as standalone unit or clustered into array (vertical or horizontal). The cabinet features a 90° rotatable mid high section. This allows the enclosure to be deployed in either a vertical or horizontal array configuration.

Impedance: 8 Ohm.

The box houses multiple internal rigging hardware fot array stacking, including facilities for ground-support, truss and wall mounting, handles, pole mount socket, and Speakon NL4 connectors.

Power Handling: #775 W nominal. *1550 W continuos.

Sensitivity: 104 dB (1w/1m). Calculated Max Spl: 134 dB continuous /140 dB peak.

Dimensions (HxWxD): 890x520x550 mm. Box can be rigged both horizontal or vertical, as mid-high section can be rotated.

The enclosure has been made with the latest techniques ensuring a perfect and rigid construction.

Net Weight: 49 kg passive. 56 kg selfpowered Pcc version.

Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills.

Components: 1x15” LF driver, 1x6 ½’’ HF, 1x1” HF on a rotatable mid-high section.

The system’s choice can be passive (IBZA 1561), and self-powered with remote PC Control (IBZA 1561PCC).

Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle.

IBZA 1561PCC is self-powered with two way amplification and controlled by a DSP built inside, (PCC Original or PCC Advanced Series) with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, the four of them, without using the software, but only clicking on the rear panel. In this way the operation’s sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without

Tecnare | 50

IBZA1561

Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points and array hardware.

the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters.

Impulse response, phase response and polar plot analysis are also available.

Tecnare | 51

IBZA1561

Accessories

DATASHEET

IBZA1561

FBVM15

IBIZA ONE Series

LPM15

FREQUENCY RESPONSE & MINIMUM PHASE

CV 12 M15

LM15

HORIZONTAL COVERAGE

HVM15

FBHM15

VERTICAL COVERAGE

HSM15

Tecnare | 52

Tecnare | 53

IBZA1561

IBZA ONE Series

INSTALLATIONDIAGRAMS

2x IBZA1561 + 2x SW118H

Tecnare | 54

Tecnare | 55

SW118H The SW118H is a folded horn loaded subwoofer designed for use in disco applications (nightclubs and portable), although it is also ideally suited for concert touring and festivals. A high-velocity horn loading technique, gives a precise cone control, resulting in a deep and fast bass response at high power levels, with a very high sensitivity.

IBIZA ONE Series

Nominal Dispersion: Not available. Impedance: 8 Ohm. Sensitivity: 103 dB (1w/1m).

The SW118H has built in proprietary hardware for simple, fast and safe rigging.

Calculated Max Spl: 135 dB continuous /140 dB peak.

The enclosure has been made with the latest techniques ensuring a perfect and rigid construction.

Power Handling: #1000 W nominal. *2000 W continuos.

Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills.

Dimensions (HxWxD): 1020x520x920 mm.

The SW118H can be supplied in active Pcc version or passive one.

Net Weight: 79 kg selfpowered Pcc version.

SW118H PCC is self-powered with one way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc.

Components: 1x18” LF driver. Construction: 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle.

With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers.

Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

ENGINEERING SPECIFICATIONS

Frequency Response: 40 Hz – 400 kHz ±4dB, measured on axys.

The response given with this subwoofer is very deep, starting at 40 Hz, but at the same time it delivers tremendous impact due its fast transient response.

The program allows the storage of as many presets as desired, which can be loaded any time, four of them without using the software, by only clicking on the rear panel.

SW118H

Flying Hardware: M8 rigging points.

check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters.

Impulse response, phase response and polar plot analysis are also available.

The system incorporates as standard a very powerful audio analyzer. The sound engineer can

Tecnare | 56

Tecnare | 57

SW118H

IBIZA ONE Series

DATASHEET

SW118H

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

2x IBZA 1561 + 2x SW118H

2x Megadisco Array + 2x SW118H

Tecnare | 58

Tecnare | 59

SW115 The SW115 is a very powerful band pass rear horn-loaded subwoofer designed for use in nightclub applications, although it is also ideally suited for concert touring and festivals. High-velocity band pass horn-loading technique, gives a precise cone control, resulting in a deep and fast bass response at high power levels, with a very high sensitivity.

IBIZA ONE Series

Nominal Dispersion: Not available. Impedance: 8 Ohm. Sensitivity: 102 dB (1w/1m).

The SW115 has built in proprietary hardware for simple, fast and safe rigging.

Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The SW115 can be supplied in active Pcc version or passive one. SW115 PCC is self-powered with one way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything.

ENGINEERING SPECIFICATIONS Frequency Response: 38 Hz – 800 kHz ±4dB, measured on axys.

The response given with this subwoofer is very deep, starting at 38 Hz, but at the same time it delivers tremendous punch due to its fast transient response.

The enclosure has been made with the latest techniques ensuring a perfect and rigid construction.

SW115

The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

Calculated Max Spl: 134 dB continuous /140 dB peak. Power Handling: #1000 W nominal. *2000 W continuos. Dimensions (HxWxD): 735x445x690mm. Net Weight: 52 kg selfpowered Pcc version. Components: 1x15” LF driver. Construction: 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points.

The program allows the storage of as many presets as desired, which can be loaded any time, four of them without using the software, but only clicking on the rear panel. With this way of operation, sound systems become far more flexible. A lot of patching can be avoided, reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way for a complex installation.

Tecnare | 60

Tecnare | 61

SW115

IBIZA ONE Series

DATASHEET

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

4x IBZA10 + 1 SW115

Tecnare | 62

Tecnare | 63

SW12 Minisub The Tecnare SW12Minisub is a very powerful 1x12” low frequency loudspeaker enclosure. This vented subbass cabinet has been designed for small sound reinforcements, where box size matters. It consists of a 12” reflex-loaded low frequency driver in a birch plywood enclosure, optimally tuned for extended low frequency response. It can be used in combination with IBZA6 or 10.

IBIZA ONE Series

The response given with this subwoofer is very deep, starting at 38 Hz. The cabinet has been tuned using the latest cad techniques. The SW12Minisub has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The box can be supplied in active Pcc version or passive one. SW12Minisub PCC is self-powered with oneway amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything.

SW12 Minisub ENGINEERING SPECIFICATIONS

Frequency Response: 38 Hz – 500 kHz ±4dB, measured on axys.

With this way of operation, sound systems become far more flexible. A lot of patching can be avoided, reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way for a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

Nominal Dispersion: Not available. Impedance: 8 Ohm. Sensitivity: 94 dB (1w/1m). Calculated Max Spl: 124 dB continuous /130 dB peak. Power Handling: #700 W nominal. *1400 W continuos. Dimensions (HxWxD): 376x376x398 mm. Net Weight: 25 kg selfpowered Pcc version. Components: 1x12” LF driver. Construction: 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points.

The program allows the storage of as much presets as desired, which can be loaded any time, four of them without using the software, by only clicking on the rear panel.

Tecnare | 64

Tecnare | 65

SW12 Minisub

IBZA ONE Series

IBIZA ONE Series

DATASHEET

FREQUENCY RESPONSE & MINIMUM PHASE

IBZA6 + SW12Minisub

Tecnare | 66

Tecnare | 67

SW12 Minisub

IBZA ONE Series

INSTALLATIONDIAGRAMS

4 IBZA10 + 2 SW12Minisub

4 IBZA6 + 1 SW12Minisub

Tecnare | 68

Tecnare | 69

SW215 The SW215 is a very powerful band pass rear horn-loaded subwoofer designed for use in large nightclub applications, although it is also ideally suited to concert touring and festivals. A high-velocity band pass horn-loading technique, gives precise cone control, resulting in a deep and fast bass response at high power levels, with a very high sensitivity.

IBIZA ONE Series

The response given with this subwoofer is very deep, starting at 36 Hz, but at the same time it delivers tremendous punch due its fast transient response. The SW215 has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The SW215 can be supplied in active Pcc version or passive one. SW215 PCC is self-powered with one way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers.

SW215

ENGINEERING SPECIFICATIONS

The program allows the storage of as many presets as desired, which can be loaded any time, four of them without using the software, by only clicking on the rear panel.

Frequency Response: 36 Hz – 400 Hz ±4dB, measured on axys.

Impedance: 4 Ohm.

Nominal Dispersion: Not available.

Sensitivity: 104 dB (1w/1m). Calculated Max Spl: 137 dB continuous /143 dB peak. Power Handling: #2000 W nominal. *4000 W continuos. Dimensions (HxWxD): 735x870x690 mm. Net Weight: 94 kg selfpowered Pcc version. Components: 2x15” LF driver. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. Flying Hardware: M8 rigging points.

Tecnare | 70

Tecnare | 71

SW215

IBIZA ONE Series

DATASHEET

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

2x IBZA15 + 1 SW215

Tecnare | 72

Tecnare | 73

IBZA215

IBZA ONE Series

INSTALLATIONDIAGRAMS

2x Megadisco Array + 2x SW215

4x Megadisco Array + 4x SW215

4x IBZA10 + 2x SW215

12x Megadisco Array + 8x SW215

Tecnare | 74

Tecnare | 75

V Series means Versatile loudspeakers,

Since its introduction, V Series has set the

DSP controlled networking powered and non-

standard for portable, professional loudspeaker

powered, portable sound reinforcement prod-

systems.

V10 / V12 / V15

V Series

ucts, ideally suited to all kinds of live performances, including stage monitoring. It offers unbeatable audio performance, advanced Pcc Technology including networking and software control on each speaker. V Series are synonymous with exceptional sound quality and reliability and are designed for the most discerning musician and audio systems contractor. Pcc Technology transforms a standard powered speaker into an active device, namely

Photo Model / V12

a PCC speaker, controlled with a small laptop via software. A standard PCC speaker houses one or more module amps and a DSP processor. All these PCC speakers are linked by a network through a USB interface to the laptop. Once connected, we can control in real time the parameters of each speaker such as volume, graphic equalisation, parametric equalisation, crossover, internal delays, compressor-limiters, check test, save and recall of presets, mute, transfer spectrum analysis, r.t.a. spectrum control, phase check, and more! Photo Model / V15

Photo Model / V10

APPLICATIONS Live music venues. Dance clubs. Theatre and corporate events. Houses of Worship. Touring.

Tecnare | 76

Tecnare | 77

The V10 is a lightweight, flexible and multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement either as a main PA or as a stage monitor. The design includes a powerful 3” voice coil 10” speaker CAD tuned into a vented box, and a 1” exit compression driver coupled to a rotatable 90ºx60º cd horn to provide a smooth and clear high frequency reproduction.

V Series

Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system can be passive (V10), or selfpowered with remote PC control (V10 PCC). V10 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response, alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting

V10 TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and four different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay, etc of each box no longer has to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

V10

ENGINEERING SPECIFICATIONS Frequency Response: 52 Hz – 20 kHz ±4dB, measured on axys. Nominal Dispersion: 90°H x 60°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 97 dB (1w/1m). Calculated Max Spl: 124 dB continuous/ 130 Peak. Power Handling: #350 W nominal. *700 W continuous. Dimensions (HxWxD): 525x340x290 mm. Net Weight: 20 kg selfpowered PCC version. Components: 1x10” LF driver, 1x1” HF driver on a rotatable exponential horn. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 78

Tecnare | 79

V10

Accessories

V Series

DATASHEET

V10

FREQUENCY RESPONSE & MINIMUM PHASE

LP-V and L-V in V10

HORIZONTAL COVERAGE

L-V10 and LP-V L-V and LP-V10

Tecnare | 80

Tecnare | 81

V Series

V10

INSTALLATIONDIAGRAMS

4x V10 +2 SW118M

2x V10

Tecnare | 82

Tecnare | 83

The V12 is a lightweight , flexible and multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a main PA or as a stage monitor. The design includes a powerful 3” voice coil 12” speaker CAD tuned into a vented box, and a 1.4” exit compression driver coupled to a rotatable asymmetric horn to provide a smooth and clear high frequency reproduction.

V Series

Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system can be passive (V12), or selfpowered with remote PC control (V12 PCC). V12 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed,

V12 and six different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

V12

ENGINEERING SPECIFICATIONS Frequency Response: 48 Hz – 17 kHz ±4dB, measured on axys. Nominal Dispersion: 55 to 100°H x 60°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 100 dB (1w/1m). Calculated Max Spl: 128 dB continuous/ 134 Peak. Power Handling: #520 W nominal. *1040 W continuous. Dimensions (HxWxD): 645x390x392 mm. Net Weight: 29 kg selfpowered PCC version. Components: 1x12” LF driver, 1x1.4” HF driver on a rotatable exponential horn. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 84

Tecnare | 85

V12

Accessories

V Series

DATASHEET

V12

FREQUENCY RESPONSE & MINIMUM PHASE

LP-V and L-V in V12

HORIZONTAL COVERAGE

L-V12 and LP-V L-V and LP-V12

Tecnare | 86

Tecnare | 87

V Series

V12

INSTALLATIONDIAGRAMS

2x V12 +2 SW118M

2x V12

Tecnare | 88

Tecnare | 89

The V15 is a lightweight, flexible and multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a main PA or as a stage monitor. The design includes a powerful 3” voice coil 15” speaker CAD tuned into a vented box, and a 1.4” exit compression driver coupled to an asymmetrical rotatable horn to provide a smooth and clear high frequency reproduction.

V Series

Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system can be passive (V15), or selfpowered with remote PC control (V15 PCC). V15 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them

V15 in the network window of the program. It is only necessary to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, by only clicking on the rear panel. Through this technique of operation, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation.

V15

ENGINEERING SPECIFICATIONS Frequency Response: 42 Hz – 17 kHz ±4dB, measured on axys. Nominal Dispersion: 55 to 100°H x 60°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 101 dB (1w/1m). Calculated Max Spl: 130 dB continuous/ 136 dB Peak.

Power Handling: #720 W nominal. *1050 W continuous.

Impulse response, phase response and polar plot analysis are also available.

Components: 1x15” LF driver, 1x1.4” HF driver on an asymmetrical exponential horn.

Dimensions (HxWxD): 715x445x395 mm. Net Weight: 34 kg selfpowered PCC version.

Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 90

Tecnare | 91

V15

Accessories

V Series

DATASHEET

V15

FREQUENCY RESPONSE & MINIMUM PHASE

LP-V and L-V in V15

HORIZONTAL COVERAGE

L-V15 and LP-V L-V and LP-V15

Tecnare | 92

Tecnare | 93

V Series

V15

INSTALLATIONDIAGRAMS

2x V15 +2 SW118M

2x V15

Tecnare | 94

Tecnare | 95

The Tecnare Array Series is a fully integrated line of self-powered DSP controlled loudspeakers that merge the singular advantages of

MINIArray / LA208 / LA122 LA312 / SW118M / SW218V

array technology, with the application of computer digital management benefits to profes-

ARRAY Series

sional audio reinforcements. With this revolutionary technique the entire concept of an array box is completely replaced by the idea that each array element changes to be an active device, namely a PCC speaker, controlled with a small laptop via software. A standard PCC speaker houses one or more module amps and a DSP processor. All these PCC speakers are linked by a Photo Model / SW118M

network through a USB interface to the laptop. Once connected, we can control in real time the parameters of each speaker such as volume, graphic equalisation, parametric equalisation, crossover, internal delays, compressor-limiters, check test, save and recall of presets, mute, transfer spectrum analysis, r.t.a. spectrum con-

Photo Model / LA122

trol, phase check, and more! Array Series are designed both for permanent installation and touring applications where even coverage, intelligibility, and high SPL levels are required. Photo Model / LA312

Array Series are engineered to offer sound reinforcement professionals solutions to meet almost any challenge. Self-powered DSP controlled arrays ensure the consistency required to obtain the benefits of line array technology and provide the best flexibility, which is a very important factor when multiple zones within the array are required.

Photo Model / LA208

APPLICATIONS Live music venues. Dance clubs. Theatre and corporate events. Houses of Worship. Touring.

Tecnare | 96

Tecnare | 97

ARRAY Series

MINIArray The Tecnare MiniArray is an extremely compact, lightweight enclosure housing two 6 and a half inches speakers, and one 1.4 inch compression driver attached to a wave guide device.

(PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc.

The first and pleasantly surprising characteristic when working with this MiniArray is the extremely extended bass response coming from such a small cabinet, well balanced with clean mids and highs.

With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers.

This solution is ideal for applications such as theaters and indoor auditoriums, where the use of excess subbass units combined with small arrays represent stage problems with undesirable bass excess headroom. The system’s shape is trapezoidal, so we can better angle and focus its elements. This feature could partially solve front fill applications if the front fill focused elements could be managed independently apart from the other elements of the array. This can be done with the active PCC MiniArray versions, as each loudspeaker is individually DSP controlled by its own digital processor. This performance give us the possibility to program air absorption correction , modified eq’s and gain for front fill situations, directivity control... and all the parameters we need to optimize the overall performance. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills. The system can be supplied in active Pcc version or passive one.

After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything. The program allows the storage of as much presets as desired, which can be loaded any time, four of them without using the software, but only clicking on the rear panel.

MINIArray

ENGINEERING SPECIFICATIONS Frequency Response: 85 Hz – 18 kHz ±4dB, measured on axys. Nominal Dispersion: 85ºH x 8ºV@-6dB points. Impedance: 16 Ohm. Sensitivity: 96 dB (1w/1m). Calculated Max Spl: 123 dB continuous/ 129 Peak. Power Handling: #250 W nominal. * 500 W continuous.

Dimensions (HxWxD): 232x543x462 mm.

Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle.

Net Weight: 27 kg selfpowered PCC version. Components: 2x6 1/2” LF driver, 1x1.4” HF driver on a proprietary waveguide device.

Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Impulse response, phase response and polar plot analysis are also available.

MiniArray PCC is self-powered with two way amplification and controlled with a DSP built inside,

Tecnare | 98

Tecnare | 99

MINIArray

ARRAY Series

DATASHEET

Accessories HV-208

MINIArray

FREQUENCY RESPONSE & MINIMUM PHASE

HS-208

HORIZONTAL COVERAGE

INSTALLATION DIAGRAMS

12x MINI Array + 4x SW118

VERTICAL COVERAGE

Tecnare | 100

Tecnare | 101

The Tecnare LA208 array is an extremely compact high oputput, lightweight enclosure housing two 8 inches speakers, and one 1.4 inches compression driver attached to a waveguide device. The system can be supplied in active Pcc version or passive one. The active PCC version has an output connector to power one passive LA208 box. The LA208 Array delivers extended bass response and well balanced clean mids and highs.

ARRAY Series

High frequency is handled by one 3 inches coil, 1.4 inches exit compression driver attached to a 85ºx10º wave guide. The system’s shape is trapezoidal, so we can better angle and focus it’s elements. This feature could partially solve front fill applications, if the front fill focused elements could be managed independently a part from the other elements of the array. This can be done with the active LA208 Array versions, as each loudspeaker, or group of 2 speakers, are individually DSP controlled by it’s own digital processor. This performance give us the possibility to program air absortion correction, modified eq’s and gain for front fill situations, directivity control... and all the parameters we need to optimize the overall performance. The LA208 Array has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills. The system can be supplied in active Pcc version or passive one. LA208 PCC is self-powered with two way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points,

LA208 compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything. The program allows the storage of as much presets as desired, which can be loaded any time, four of them without using the software, but only clicking on the rear panel. With this way of operation, sound systems become far more flexible. A lot of patching can be avoided, reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay of each box no longer have to be the same, without the hieroglyphic without the hieroglyphic needed to do that in a conventional way for a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters.

LA208

ENGINEERING SPECIFICATIONS Frequency Response: 78 Hz – 18 kHz ±4dB (1 box). Impedance: 8 Ohm. Sensitivity: 99 dB. Calculated Max Spl: 129 dB. Power Handling: #480 W nominal. *900 W continuous. Coverage angle: 110º horizontal x 20º vertical. Dimensions (HxWxD): 610x458x262 mm. Net Weight: 28,6 kg PCC version. Components: Low 2x8”. High 1x1.4” exit compression driver. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Impulse response, phase response and polar plot analysis are also available.

Tecnare | 102

Tecnare | 103

LA208

Accessories

ARRAY Series

DATASHEET

LA208

FREQUENCY RESPONSE & MINIMUM PHASE

HV-208

HORIZONTAL COVERAGE

VERTICAL COVERAGE

HS-208

Tecnare | 104

Tecnare | 105

LA208

ARRAY Series

INSTALLATIONDIAGRAMS

3x LA208 + 2x SW218V

2x LA208 + 2x SW118

Tecnare | 106

Tecnare | 107

ARRAY Series

The LA122 is an extremely compact line array designed to be used in large or medium sound reinforcement applications. The bass and mid sections are conformed by one 12” driver in bass reflex configuration. High frequency is handled by two 1.4” exit compression drivers attached to a pattern-controlled (90º horizontal x 8º vertical) symmetrical curved wave guide. The system’s shape is trapezoidal, so we can better angle and focus its elements. This feature could partially solve front fill applications if the front fill focused elements could be managed independently apart from the other elements of the array. That can be done with the LA122 array, as each loudspeaker is individually DSP controlled by its own digital processor. Every LA122 array has built-in the amplifiers and digital control required to vary each of the features of the enclosure. This performance gives us the possibility to program air absorption correction, modified eq’s and gain for front fill situations, directivity control... and all the parameters we need to optimize the overall performance. The LA122 has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills. LA122 PCC array is self-powered with twoway amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc.

LA122 With the mouse of a small laptop, the sound engineer can vary, real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything. The program allows the storage of as much presets as desired, which can be loaded any time, four of them without using the software, but only clicking on the rear panel. With this way of operation, sound systems become far more flexible. A lot of patching can be avoided, reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way for a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, on spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters.

LA122

ENGINEERING SPECIFICATIONS Frequency Response: 69 Hz – 18 kHz ±4dB, measured on axys. Nominal Dispersion: 85ºH x 8ºV@-6dB points. Impedance: 8 Ohm. Sensitivity: 102 dB (1w/1m). Calculated Max Spl: 131 dB continuous/ 137 Peak. Power Handling: #660 W nominal. * 1100 W continuous. Dimensions (HxWxD): 410x600x430 mm. Net Weight: 40 kg selfpowered PCC version. Components: 1x12” LF driver, 2x1.4” HF driver on a proprietary waveguide device. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 108

Tecnare | 109

LA122

Accessories

ARRAY Series

DATASHEET

LA122

FREQUENCY RESPONSE & MINIMUM PHASE

HV-G15-122

HORIZONTAL COVERAGE

VERTICAL COVERAGE

HS-G15-122

Tecnare | 110

Tecnare | 111

LA122

ARRAY Series

INSTALLATIONDIAGRAMS

12x LA122 + 8x SW118

8x LA208 + 4x SW118

Tecnare | 112

Tecnare | 113

ARRAY Series

Since the beginning, the goal of most line array manufacturers has been to build a one cabinet model that could cope with all kind of events. Very big and heavy designs have been unable to avoid the use of extra subs. So why rig those huge systems housed with 15” and 18” units if in the end, extra subs, usually not hung, are required? Moreover, the technology employed brings extra on- stage problems with undesirable bass excess headroom. Another complication, not well-solved, is the need for specially developed loudspeakers to cover the front fill situations. More loudspeakers have to be used, with different signal processing, so in the end we find that systems become more complex and less flexible. To bring forward a total solution to fix all these in a simple way is not easy, but the LA312 has enough new solutions to clear up things and make the job of sound engineers easier. First of all we have established a design criterion in which the size of the cabinet is extremely compact. The bass section consists of two 12” drivers coupled to a low flare folded horn. A horn always has the benefit of better control the pattern in which the sound is projected, avoiding the headroom bass problems on stage. The coherent sum of the mouths’ outputs of all the enclosures of the array extends the low frequency response (i.e. 46Hz–3dB for an 8 array element). Nowadays for events in which very low frequency performance is needed, the use of extra subwoofers will be required. For the mid frequencies reproduction, the LA312 uses one very high output 12” neodimium loudspeaker, coupled to a phase corrector device that evenly spreads its response all over the mouth of the horn. That is fundamental for every well designed line array to avoid combing situations.

LA312

ENGINEERING SPECIFICATIONS

High frequency is handled by two 1.4” exit compression drivers attached to a pattern controlled (85º horizontal x 8º vertical) symmetrical curved wave guide, coupled to a non resonant horn.

Frequency Response: 58 Hz – 19 kHz ±4dB, measured on axys. 42 Hz – 19 kHz ±4dB (6 element array).

The system’s shape is trapezoidal, so we can better angle and focus its elements. This feature could partially solve front fill applications, if the front fill focused elements could be managed independently apart from the other elements of the array. That can be done with the LA312, as each loudspeaker is individually DSP controlled by its own digital processor. Every LA312 has built into it the amplifiers and digital control required to vary each of the features of the enclosure. This performance give us the possibility to program air absorption correction, modified eq’s and gain for front fill situations, directivity control... and all the parameters we need to optimize the overall performance. The LA312 has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills. With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything.

Nominal Dispersion: 90ºH x 8ºV@-6dB points. Impedance: 4 Ohm low, 8 Ohm mid, 8 Ohm high.

The program allows the storage of as much presets as desired, which can be loaded any time, four of them without using the software, but only clicking on the rear panel.

Sensitivity: 105 dB (1w/1m).

Power Handling: #2400 W nominal. * 4800 W continuous.

LA312 PCC is self-powered with three-way amplification and controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc.

Net Weight: 89 kg selfpowered PCC version.

Calculated Max Spl: 138 dB continuous/ 144 dB Peak.

Dimensions (HxWxD): 440 (front height) - 310 (rear height) x 1245x740 mm.

Components: Low: 2x12” LF driver band pass horn loaded. Mid: 1x2” HF phase corrected. High: 2x1.4” compression driver attached to proprietary waveguide device. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 114

Tecnare | 115

LA312

ARRAY Series

DATASHEET

LA312

FREQUENCY RESPONSE & MINIMUM PHASE

HORIZONTAL COVERAGE

VERTICAL COVERAGE

Tecnare | 116

Tecnare | 117

LA312

Accessories

INSTALLATIONDIAGRAMS

LA312

HV-312

8x LA312 + 6x SW218V

HS-312

Tecnare | 118

Tecnare | 119

The Tecnare SW118M is a very powerful 1x18” vented subbass cabinet. It has been designed for all kinds of sound reinforcement: short, medium or long throw. The box houses rigging hardware to be used in array systems, such as LA122 or MiniArray. It can be also used in combination with V Series or IBZA One Series. The response given with this subwoofer is very deep, starting at 35 Hz. The cabinet has been tuned using the latest cad techniques.

ARRAY Series

The SW118M has built in proprietary hardware for simple, fast and safe rigging. The enclosure has been made with the latest techniques assuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is covered with rugged Durawound texture finish and protected with epoxy powder coating grills. The system can be supplied in active Pcc version or passive one. SW118M PCC is self-powered with one way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with ten fully parametric eqs, delay, crossover points, compressors, gain controls, 30 band eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. You only have to choose the speaker to be managed, and six different windows will be available for the sound engineer to control everything.

SW118M The program allows the storage of as many presets as desired, which can be loaded any time, four of them without using the software, by only clicking on the rear panel. With this way of operation, sound systems become far more flexible. A lot of patching can be avoided, reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way for a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, in spectrum or transfer mode, while modifying any of the various audio controls available on the system. It also incorporates a set-up screen, with an audio generator, markers for a delay measurement, and vu-meters. Impulse response, phase response and polar plot analysis are also available.

V Series SW118M ENGINEERING SPECIFICATIONS

Frequency Response: 35 Hz – 400 Hz ±4dB, measured on axys. Nominal Dispersion: Not available. Impedance: 8 Ohm. Sensitivity: 98 dB (1w/1m). Calculated Max Spl: 129 dB continuous/ 135 Peak. Power Handling: #1000 W nominal. * 2000 W continuous. Dimensions (HxWxD): 556x569x691 mm. Net Weight: 54 kg selfpowered PCC version. Components: 1x18” LF driver. Construction: 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 120

Tecnare | 121

SW118M

ARRAY Series

DATASHEET

SW118M

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

2x SW118M + 2x LA208

4x SW118M + 12x MiniArray Tecnare | 122

Tecnare | 123

SW118M

ARRAY Series

INSTALLATIONDIAGRAMS

8x SW118M + 12x LA122

4x SW118M + 8x LA208

Tecnare | 124

Tecnare | 125

The Tecnare SW218V is a very powerful double 2x18” hybrib subwoofer cabinet. It has been designed for medium to long throw sound reinforcements. The response given with this subwoofer is very deep, starting at 38 Hz. It delivers a tight punch combined with a low deep response. The acoustic loading of the Speakers, perfectly matched, prevents cones to over run maximum cone displacement. It is the perfect solution for all kind of touring systems. Castors can be supplied as an accessory.

ARRAY Series

The system can be supplied in active Pcc Version or passive one. The design includes two very powerful 4” voice coil 18” speakers. The system can be passive (SW218V), or selfpowered with remote PC Control (SW218V PCC). SW218V PCC is self-powered with two mono modules amplification and is controlled with a DSP (Original, Cobranet, or Advanced series) built inside, with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be available for the sound engineer to control everything.

SW218V The program allows the storage of as many presets as desired, which can be loaded at any time, ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, while modifying any of the various audio controls available on the system. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged texture finish and protected with specially treated grills.Z

SW218V

ENGINEERING SPECIFICATIONS

Frequency Response: 38 Hz – 280 Hz ±4dB, measured on axys. Nominal Dispersion: Omnidirectional. Impedance: 4 Ohm. Sensitivity: 103 dB (1w/1m). Calculated Max Spl: 138 dB continuous /144 dB peak. Power Handling: #2.000 W nominal. * 4.000 W continuous. Dimensions (HxWxD): 108x58x83 cm. Net Weight: 85 kg selfpowered PCC Version. Components: Low 2x18” LF driver. Construction: 18mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam. CONNECTORS Audio: Input: XLR 3 pin female. Link: XLR 3 pin male. DSP Network: Input: XLR 5 pin female. Input: XLR 5 pin male. Mains: Neutrik Powercon male and link. AMPLIFIER Type: Class D inc SMPA and networked DSP. Power Output: 2x1.500 watts r.m.s. @ 8 ohms (1kHz, 0.01% THD) +220 watts continuous @ 8 ohms (1kHz, 0.01% THD) Dynamic Range: 110 dB Input Clip: 10 dBu Bandwidth: 20 Hz - 20 kHz ±0.5 dB Power Requirements: 100V to 240V AC @ 50/60 Hz.

Tecnare | 126

Tecnare | 127

SW218V

ARRAY Series

DATASHEET

SW218V

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

8x LA312 + 6x SW218V

6x LA208 + 2x SW218V Tecnare | 128

Tecnare | 129

SW218V INSTALLATIONDIAGRAMS

Tecnare | 130

ARRAY Series

8 AMS12 + 2 SW218V

8 AMS15 + 2 SW218V

12 AMS12 + 4 SW218V

12 AMS15 + 4 SW218V

Tecnare | 131

AMS12 / AMS15 / SW218V Tecnare AMS Series (Arrayable Multi-

tically. At the same time, equalization, cross-

purpose Speaker) have been released to be

overing, limiting, delay etc of each box no longer

the most versatile sound system solution for

have to be the same, without the hieroglyphic

all kind of audio applications. Doing every job

needed to do that in a conventional way with a

with a single tool is not an easy task, but AMS

complex installation.

incorporate several solutions that make these

The system incorporates as standard a very

systems the perfect solution for versatility and

powerful audio analyzer. The sound engineer

ease of use.

can check the systemâ&#x20AC;&#x2122;s response, while modify-

AMS can be used as a full range stand alone speaker box, or as an scalable high output co-

AMS Series

ing any of the various audio controls available on the system.

herent radiating module element in either vertical and horizontal array systems. Thanks to the wide range of accesories, the compact and flexible design, as well as the availability of selfpowered PCC DSP Software Control Technology involved, makes AMS ideal for nearly every high end audio application. AMS Series is formed by AMS12, AMS15 and SW218V hybrid double subwoofer. The system can be passive (AMS), or self-powered with remote PC Control (AMS PCC). AMS PCC is a self-powered speaker, controlled in real time with a built inside DSP (PCC Photo Model / AMS15

Tecnology). Original, Cobranet, OR Advanced Series, with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, on each speaker, individually controlled. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE Software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be avail-

Photo Model / AMS12

able for the sound engineer to control every-

APPLICATIONS

thing.

Live music venues. Dance clubs. Theatre and corporate events. Houses of Worship. Touring.

The program allows the storage of as many presets as desired, which can be loaded at any time, ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls dras-

Photo Model / SW218V

Tecnare | 132

Tecnare | 133

The AMS12 is a flexible multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a single full range PA or as an array element. Arrays can be stacked horizontally or vertically. The design includes a powerful neodimium 3” voice coil 12” speaker CAD tuned into a vented box, and a 1.4” exit neodimium compression driver coupled to a rotatable wide bandwidth 90ºx30º high frequency horn.

AMS Series

The system can be passive (AMS12), or selfpowered with remote PC control (AMS12 PCC). AMS12 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series) with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time,

AMS12 ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, while modifying any of the various audio controls available on the system. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills.

AMS12

ENGINEERING SPECIFICATIONS Frequency Response: 48 Hz – 19 kHz ± 3dB, measured on axys. Nominal Dispersion: 90°H x 30°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 103 dB (1w/1m). Calculated Max Spl: 132 dB continuous. Power Handling: #580 W AES nominal. * 1.160 W continuous. Dimensions (HxWxD): 705x395x420 mm. Net Weight: 24 kg passive version, 30 kg PCC version including rigging accesories. Components: 1x12” LF driver, 1x1.4” HF driver on a rotatable Constant Q horn. Construction: 16mm birch plywood. Finished in black semi-matt textured weatherized coating. Two recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated cloth. AMPLIFIER Type: Class H inc SMPA and networked DSP. Power Output: 620 watts continuous @ 8 ohms (1kHz, 0.01% THD) +220 watts continuous @ 8 ohms (1kHz, 0.01% THD)

Tecnare | 134

Tecnare | 135

AMS12

Accessories

DATASHEET

AMS12

FBV12

AMS Series

LP12

FREQUENCY RESPONSE & MINIMUM PHASE

Tec B004 12

FBH12

HORIZONTAL COVERAGE

L12

Tec B AMS12

HV12

VERTICAL COVERAGE

HS12

Tecnare | 136

Tecnare | 137

AMS12

AMS Series

INSTALLATIONDIAGRAMS

8 AMS12 + 2 SW218V

2 AMS12 + 2 SW118M

12 AMS12 + 4 SW218V

Tecnare | 138

Tecnare | 139

The AMS15 is a flexible multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement, either as a single full range PA or as an array element. Arrays can be stacked horizontally or vertically. The design includes a powerful neodimium 3” voice coil 15” speaker front horn loaded CAD tuned box, and a 1.4” exit neodimium compression driver coupled to a rotatable wide bandwidth 90ºx40º high frequency horn.

AMS Series

The system can be passive (AMS15), or selfpowered with remote PC control (AMS15 PCC). AMS15 PCC is self-powered with two way amplification and is controlled with a DSP built inside, (PCC Original or PCC Advanced Series), with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, etc. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, four of them without using the software, by only clicking on the rear panel.

AMS15 Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, while modifying any of the various audio controls available on the system. Flying hardware provision, handles and a recessed floor stand socket are included as standard.

AMS15

ENGINEERING SPECIFICATIONS

Frequency Response: 42 Hz – 18 kHz ±4dB, measured on axys. Nominal Dispersion: 90°H x 40°V@-6db points. Rotatable horn allows swap of horizontal and vertical pattern. Impedance: 8 Ohm. Sensitivity: 104 dB (1w/1m).

The enclosure has been made with the latest techniques ensuring a perfect and rigid construction.

Calculated Max Spl: 133 dB continuous /135 peak.

Weatherized finish is provided, as the cabinet is coated with rugged

Power Handling: #680 W AES nominal. * 1.360 W continuous.

Durawound texture finish and protected with specially treated grills.

Dimensions (HxWxD): 890x520x550 mm. Net Weight: 39 kg passive version, 45 kg PCC. Components: 1x15” LF driver, 1x1.4” HF driver on a rotatable CD horn. Construction: 16mm birch plywood. Finished in black semi-matt textured Durawound weatherized coating. One recessed carrying handle. Grille: Powder coated perforated steel with acoustically transparent reticulated foam.

Tecnare | 140

Tecnare | 141

AMS15

Accessories

DATASHEET

AMS15

FBVM15

AMS Series

LPM15

FREQUENCY RESPONSE & MINIMUM PHASE

Tec B004 15

FBHM15

HORIZONTAL COVERAGE

LM15

Tec B AMS15

HVM15

VERTICAL COVERAGE

Tec AMS15

HSM15

Tecnare | 142

Tecnare | 143

AMS15

AMS Series

INSTALLATIONDIAGRAMS

8 AMS15 + 2 SW218V

2 AMS15 + 2 SW118M

12 AMS15 + 4 SW218V

Tecnare | 144

Tecnare | 145

AMS Series

SW218V

ENGINEERING SPECIFICATIONS

Tecnare | 146

Tecnare | 147

SW218V

AMS Series

DATASHEET

SW218V

INSTALLATIONDIAGRAMS

FREQUENCY RESPONSE & MINIMUM PHASE

8x LA312 + 6x SW218V

6x LA208 + 2x SW218V Tecnare | 148

Tecnare | 149

SW218V INSTALLATIONDIAGRAMS

Tecnare | 150

AMS Series

8 AMS12 + 2 SW218V

8 AMS15 + 2 SW218V

12 AMS12 + 4 SW218V

12 AMS15 + 4 SW218V

Tecnare | 151

ELECTRONICS FOR PASSIVE SPEAKERS Tecnare passive speakers, available for all series, can be powered up with conventional amplifiers (Tecnare MA, MH and MCH Series power amplifiers) and processed with external processors (Tecnare DPA28X digital processor).

TECNARE POWER AMPLIFIERS The TECNARE power amplifiers are professional tools, designed and built to release outstanding audio performance with maximum reliability. Protected against overheating, overload and short-circuits as well as high frequency and DC at the output. All are rugged, and offer unmatched value in their class.

MA800

MA2400

Load impedance Rated output power (THD=1%, 1kHz) Single channel output power (THD=1%, 1kHz) Maximum bridged output power (THD=1%, 1kHz) Maximum RMS voltage swing (THD=1%, 1kHz) Slew rate (at 1kHz) Power consumption (at 1/8 maximum output power, lim. Pink) Input sensitivity (at rated output power or voltage, 1kHz) THD at rated output power IMD-SMPTE (60Hz, 7kHz) DIM30 (3.1kHz, 15kHz) Crosstalk (ref. 1kHz, at 10% rated output power) Frequency response (ref. 1kHz) Input impedance (20Hz …20kHz, balanced) Damping factor (at 100Hz/1kHz 8Ohms) Signal to noise ratio (A weighted) Power requirements Protection

Cooling Dimensions (WxDxH) Net weight Gross weight

MA800

MA2400

MH4000

MCH4700

8ohm/ 4ohm/ 2ohm 350W/ 545W/ 704W 370W/ 590W/ 800W 1040W/ 1340W

8ohm/ 4ohm/ 2ohm 740W/ 1100W/ 1360W 800W/ 1250W/ 1475W 2240W/ 2719W

8ohm/ 4ohm/ 2ohm 1030W/ 1600W/ 2200W

8ohm/ 4ohm/ 2ohm 4x490/4x810/4x930 W

3300W/ 4500W

2x1600W/ 2x1800W

54.4V 32V/us 410W/ 700W/ 1085W

80V 42V/us 450W/ 720W/ 1105W

100V 50V/us 500W/ 740W/ 1500W

62V 38V/us 400W/ 650W/ 950W

1.4V

<0.1% <0.1% <0.1% <80dB

20Hz…20kHz (0-2dB) 20kOhm/balanced 10kOhm/unbalanced >450 105dB AC-230V 50Hz-60Hz Audio limiters, high temperature, shor circuit Front - to - rear 483x310x88mm 16.5kg 19.5kg

20Hz…20kHz (0-2dB) 20kOhm/balanced 10kOhm/unbalanced >500 105dB AC-230V 50Hz-60Hz Audio limiters, high temperature, shor circuit Front - to - rear 483x405x88mm 22.8kg 25.8kg

20Hz…20kHz (0-2dB) 20kOhm/balanced 10kOhm/unbalanced >450 106dB AC-230V 50Hz-60Hz Audio limiters, high temperature, shor circuit Front - to - rear 483x390x88mm 23.7kg 26,7kg

20Hz…20kHz (0-2dB) 20kOhm/balanced 10kOhm/unbalanced >450 106dB AC-230V 50Hz-60Hz Audio limiters, high temperature, shor circuit Front - to - rear 483x335x88mm 11.5kg 14.0kg

MH4000

MCH4700

Tecnare | 152

Tecnare | 153

ELECTRONICS FOR PASSIVE SPEAKERS

TECNARE DPA28X DIGITAL PROCESSOR

The DPA 28X is a complete 2 input - 8 output digital loudspeaker management system designed for the touring or fixed sound installation markets. The absolute latest in available technology is utilized with 64-bit floating point processors and high performance 24-bit Analogue Converters. The high-bit DSP prevents noise and distortion induced by truncation errors of the commonly used 24-bit fixed-point devices. A complete set of parameters include I/O levels, delay, polarity, 8 bands of parametric EQ per channel, multiple crossover selections, compressor, Limiter, USB and Ethernet port connection. Precise frequency control is achieved with its 1 Hz resolution.

FEATURES

The DPA 28X can be controlled or configured in real time on the front panel using the previously stored presets or with the intuitive PC software via the USB or Ethernet interface. The Ethernet port allows controlling the device from a long distance using just an Internet connection.

Ethernet port connection.

2 Input and 8 Outputs. 64 Bits floating point DSP. High performance 24-bit A/D Converters. 1 Hz Frequency Resolution. Storage of up to 10 program setups. Unlimited number of presets via software. Uploading of 10 collection presets in one step via software. USB port connection. 30 bands Input graphic equalizer. 8 bands Output Parametric equalizer per output channel. 4 ways configurable Crossover Main Delay. Input and output Compressor and Limiter. Configurable Clock. Noise Generator. Sound Analyzer. Phase inverter per band. Mute. Via adjustable delay.

Tecnare | 154

Tecnare | 155

Design: www.avancecreativo.com

C/ Encinar 282 - Pol. Ind. Monte Boyal 45950 Casarrubios del Monte SPAIN Phone: 34 918 170 110 34 918 171 001 Fax: 34 918 183 053 www.tecnare.com