EXP5000 System Overview
2.4 EXP5000 Buttons and Knobs Left Buttons and Knob The left-hand buttons and knob on the Entegra EXP5000 allow you to set the navigation configuration and course. The Nav (Primary Navigation) button is enabled by default (the enabled button has a green rim). To enable a different left-hand button, press it. Once enabled, you can continue to press the button to change the setting.
Note: The Nav button is re-enabled ten seconds after you last push or rotate the Bearing, Aux, and Range/View button. Avidyne suggests that you enable the desired button just before you change the knob. The state of each navigation button is displayed in the adjacent data block, as shown in Figure 5. For information about the data blocks, see Nav, Bearing and Aux Data Blocks, on page 19. 1
2
3
4
5
Figure 5. Left Knob & Buttons 1) Nav (Primary Navigation)—Controls the source for the Course Deviation Indicator (CDI) and adjacent data block. In a dual GPS/ VHF navigator system, the available sources are: GPS 1, VLOC 1, GPS 2, and VLOC 2.
600-00142-000 Rev 05
-17-
Entegra EXP5000 PFD