AMP [ XTv3 ] XT-800.2 V3 • 2 Ohm Stable Class DE • 2-Channel High Speed DIGITAL STEREO Amplifier • Dynamic Power: 1000W • RMS Power (2 Ohm): 250W X 2 • RMS Power (4 Ohm): 125W X 2 • Bridged Power (4 Ohm) (RMS): 500W X 1 • Signal to Noise Ratio: 110 dB • Frequency Response: 5Hz to 50KHz • Low Level Input Sensitivity: 200mV to 8V
XT-2000DE V3 • 1 Ohm Stable Class DE Mono-Block • Dynamic Power: 2400W • RMS Power (1 Ohm): 1200W X 1 • RMS Power (2 Ohm): 750W X 1 • RMS Power (4 Ohm): 500W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 500Hz • Low Level Input Sensitivity: 200mV to 8V
XT-800.4 V3
XT-1600.2 V3
• 2 Ohm Stable Class DE • 4-Channel High Speed DIGITAL STEREO Amplifier • Dynamic Power: 700W • RMS Power (2 Ohm): 170W X 4 • RMS Power (4 Ohm): 100W X 4 • Bridged Power (4 Ohm) (RMS): 340W X 2 • Signal to Noise Ratio: 110 dB • Frequency Response: 5Hz to 50KHz • Low Level Input Sensitivity: 200mV to 8V
• 2 Ohm Stable Class DE • 2-Channel High Speed DIGITAL STEREO Amplifier • Dynamic Power: 2000W • RMS Power (2 Ohm): 500W X 2 • RMS Power (4 Ohm): 250W X 2 • Bridged Power (4 Ohm) (RMS): 1000W X 1 • Signal to Noise Ratio: 110 dB • Frequency Response: 5Hz to 50KHz • Low Level Input Sensitivity: 200mV to 8V
XT-4000DE V3 • 1 Ohm Stable Class DE Mono-Block • Dynamic Power: 3200W • RMS Power (1 Ohm): 1600W X 1 • RMS Power (2 Ohm): 950W X 1 • RMS Power (4 Ohm): 550W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 500Hz • Low Level Input Sensitivity: 200mV to 8V
RE Audio’s New Generation of High Speed Digital Amplifiers series is a welcomed u upgrade upgr from our popular XT V2 series. DE class and This new seriess 2 Ohm-stable O Blocks offer a massive new 1 Ohm-stable Mono Blo along with other refinements heat sink design alo upgrades. and upgrade es. “Elevated Efficiency Platform,” With its ““Elev are guaranteed that ever you ar re g abundance of power that we ab und are famous for, but with much less drain on the charging system.
1
►Due to continuing product improvement, specifications are subject to change without notice.
AMP [ VLX ] VLX-4150X • 4-Channel High Speed DIGITAL Amplifier • Dynamic Power: 800W • RMS Power (2 Ohm): 200W X 4 • RMS Power (4 Ohm): 125W X 4 • Bridged Power (4 Ohm) (RMS): 400W X 2 • Signal to Noise Ratio: 85 dB • Frequency Response: 20Hz to 30KHz • Low Level Input Sensitivity: 200mV to 8V
VLX-2DE • Class-DE Monoblock DIGITAL Bass Amplifier • RMS Power (1 Ohm): 1800W X 1 • RMS Power (2 Ohm): 900W X 1 • RMS Power (4 Ohm): 450W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 250Hz • Low Level Input Sensitivity: 350mV to 8V
VLX-1DE • Class-DE Monoblock DIGITAL Bass Amplifier • RMS Power (1 Ohm): 1000W X 1 • RMS Power (2 Ohm): 500W X 1 • RMS Power (4 Ohm): 250W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 250Hz • Low Level Input Sensitivity: 350mV to 8V
VLX-3DE • Class-DE Monoblock DIGITAL Bass Amplifier • RMS Power (1 Ohm): 2400W X 1 • RMS Power (2 Ohm): 1200W X 1 • RMS Power (4 Ohm): 600W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 250Hz • Low Level Input Sensitivity: 350mV to 8V
VLX-4DE • Class-DE Monoblock DIGITAL Bass Amplifier • RMS Power (1 Ohm): 7000W X 1 • RMS Power (2 Ohm): 4400W X 1 • RMS Power (4 Ohm): 2500W X 1 • Signal to Noise Ratio: 80 dB • Frequency Response: 20Hz to 250Hz • Low Level Input Sensitivity: 350mV to 9V
Take It Up a Notch Watch for the new full range, ALL digital series amplifiers - one of the smallest, most powerful, most efficient 1ohm-stable (excluding VLX-4150X) amplifiers on the market.
Common Features • • • • • • • •
High-current Matched MOSFET devices Class DE technology utilizing our Elevated Efficiency Flatform 24 dB/octave Subsonic Filter(DE class) 24 dB/octave Electronic Crossover Balanced Transformerless Logic input for the highest possible Damping Factor, Slew Rate, and Signal-to-Noise Ratio. Double 30-amp speaker relays(DE class: single on VLX-1DE) 90% High Density Construction Surface Mount Technology Pulse-width Modulation power supply(DE class: excluding VLX-1DE)
►Due to continuing product improvement, specifications are subject to change without notice.
2
Woofer [ REX ]
Common Features • • • • • • • • • •
Mica Filled Poly Cone Santoprene Rubber Surround Pressed Steel Basket High Temp 8-layer Copper Voice Coil FEA Optimized Motor Structure Single Magnet Linear Conex Spiders Rubber Gasket Nominal Impedance: Dual 4 Ohm Power Handling: 175W (RMS)
Product Dimension 8 • Mounting Depth - 4.5” • Mounting Hole Diameter - 7.3” • Overall Diameter - 8.7” • Bolt Hole Circle - 8” • Motor Width - 4.875” • Motor Depth - 1.9” • Basket Depth - 2.4” • Displacement - 0.07 cu. ft. • Weight - 6.2 lbs.
What We Call “Entry Level” is Anything But Entry Level The series offers incredible output and distortion free sound you would come to expect from fro subs costing far more.
10 • Mounting Depth - 5” • Mounting Hole Diameter - 9.3” • Overall Diameter - 10.9” • Bolt Hole Circle - 10.5” • Motor Width - 4.875” • Motor Depth - 1.9” • Basket Depth - 3” • Displacement - 0.09 cu. ft. • Weight - 6.8 lbs.
12 • Mounting Depth - 5.5” • Mounting Hole Diameter - 11” • Overall Diameter - 12.8” • Bolt Hole Circle - 12” • Motor Width - 4.875” • Motor Depth - 1.9” • Basket Depth - 3.5” • Displacement - 0.10 cu. ft. • Weight - 7.5 lbs.
3
►Due to continuing product improvement, specifications are subject to change without notice.
Woofer [ SRX ] Common Features
Product Dimension 10 • • • • • • • • •
Mounting Depth - 6” Mounting Hole Diameter - 9.3” Overall Diameter - 10.9” Bolt Hole Circle - 10” Motor Width - 6.7” Motor Depth - 3” Basket Depth - 3” Displacement - 0.12 cu. ft. Weight - 15.4 lbs.
• • • • • • • • •
Mounting Depth - 6.5” Mounting Hole Diameter - 11” Overall Diameter - 12.8” Bolt Hole Circle - 12” Motor Width - 6.7” Motor Depth - 3” Basket Depth - 3.5” Displacement - 0.14 cu. ft. Weight - 16 lbs.
• • • • • • • • •
Mounting Depth - 7.9” Mounting Hole Diameter - 14” Overall Diameter - 15.6” Bolt Hole Circle - 14.7” Motor Width - 6.7” Motor Depth - 3” Basket Depth - 4.9” Displacement - 0.16 cu. ft. Weight - 16.5 lbs.
• • • • • • • • • •
Kraft Pulp Cone Rubber Surround Pressed Steel Basket 4-layer Copper Voice Coil FEA Optimized Motor Structure Double Stack Magnets Linear Spiders Foam Gasket Normal Impedance: Dual 2 or 4 Ohm Power Handling: 300W (RMS)
12
15
Expect MONSTER Performance Form our series—with double the power handling, striking cosmetics, and increased audio output over our RE series.
►Due to continuing product improvement, specifications are subject to change without notice.
4
Woofer [ SEX ]
Redefining “Bang for the Buck!”
Product Dimension 10
Reproducing that gut retching lower bass register loudly, accurately, and continuously without failure is what you can expect from the series.
• Mounting Depth - 6.4” • Mounting Hole Diameter - 9.3” • Overall Diameter - 11” • Bolt Hole Circle - 10.1” • Motor Width - 7.3” • Motor Depth - 3.4” • Basket Depth - 2.94” • Displacement - 0.14 cu. ft. • Weight - 21 lbs.
Common Features 12 • Mounting Depth - 6.9” • Mounting Hole Diameter - 11.2” • Overall Diameter - 12.5” • Bolt Hole Circle - 11.75” • Motor Width - 7.3” • Motor Depth - 3.44” • Basket Depth - 3.46” • Displacement - 0.15 cu. ft. • Weight - 21.5 lbs.
15 • Mounting Depth - 8.4” • Mounting Hole Diameter - 14” • Overall Diameter - 15.5” • Bolt Hole Circle - 14.65” • Motor Width - 7.3” • Motor Depth - 3.6” • Basket Depth - 4.8” • Displacement - 0.17 cu. ft. • Weight - 23.5 lbs.
5
• • • • • • • • • • •
Dual Composite 2-piece Cone Rubatek Foam Surround Cast Aluminum Basket Tork-Tite Terminal 3" 4-layer Aluminum Voice Coil FEA Optimized Motor Structure Triple Stack Magnets Progressive Spiders Wrap around Rubber Gasket Nominal Impedance: Dual 2 or 4 Ohm Power Handling: 600W (RMS)
►Due to continuing product improvement, specifications are subject to change without notice.
Woofer [ SXX/SX ]
Product Dimension 10 • Mounting Depth - 6.4” • Mounting Hole Diameter - 9.3” • Overall Diameter - 11” • Bolt Hole Circle - 10.1” • Motor Width - 7.3” • Motor Depth - 3.4” • Basket Depth - 2.94” • Displacement - 0.15 cu. ft. • Weight - 24 lbs.
12
Common Features What A Daily Driving Sub Should Be.
Dual Composite 2-piece Cone Rubatek Foam Surround Cast Aluminum Basket Tork-Tite Terminal 3" 8-layer Aluminum Flat Wire Voice Coil FEA Optimized Motor Structure Triple Stack Magnets Progressive Spiders Wrap around Rubber Gasket Nominal Impedance: Dual 2 or 4 Ohm Power Handling: 1000W (RMS)
15 • Mounting Depth - 8.4” • Mounting Hole Diameter - 14” • Overall Diameter - 15.5” • Bolt Hole Circle - 14.65” • Motor Width - 7.3” • Motor Depth - 3.6” • Basket Depth - 4.8” • Displacement - 0.18 cu. ft. • Weight - 27.6 lbs.
US
A
What most other manufacturers do to make a speaker handle torturous digital bass also degrades sound quality. Not so HERE! Now you can play loud and sound great all week, then go compete on the weekend! That’s the series.
• • • • • • • • • • •
• Mounting Depth - 6.9” • Mounting Hole Diameter - 11.2” • Overall Diameter - 12.5” • Bolt Hole Circle - 11.75” • Motor Width - 7.3” • Motor Depth - 3.44” • Basket Depth - 3.46” • Displacement - 0.16 cu. ft. • Weight - 24.5 lbs.
►Due to continuing product improvement, mprovement, specifications are subject to change c without notice.
M
ad
e
in
18 • Mounting Depth - 9..5” • Mounting Hole Diameter - 16.75” • Overall Diameter - 18.5” • Bolt Hole Circle - 17.5” • Motor Width - 6.5” • Motor Depth - 3.25” • Basket Depth - 6.25” • Displacement - 0.22 cu. ft. • Weight - 28 lbs.
6
Woofer [ XXX ] Common Features
Product Dimension XXX 12 • • • • • • • • •
Mounting Depth - 12.75” Mounting Hole Diameter - 11.5” Overall Diameter - 13” Bolt Hole Circle - 12.25” Motor Width - 10.5” Motor Depth - 5” Basket Depth - 7.75” Displacement - 0.24 cu. ft. Weight - 72 lbs.
• • • • • • • • • • • • •
Dual Composite 2-piece Cone Rubber Surround Integrated Gasket Cast Aluminum Basket Tork-Tite Terminal 3" 4-layer Aluminum Flat Wire Voice Coil FEA Optimized Motor Structure Split Coil Design VMS Vented Magnet System Dual Progressive Spiders Integrated Tinsel Lead Nominal Impedance: Dual 2 Ohm Power Handling: 2000W (RMS)
“Near Perfect Bass”
US in e ad
Mounting Depth - 13.5” Mounting Hole Diameter - 14.5” Overall Diameter - 16” Bolt Hole Circle - 15.25” Motor Width - 10.5” Motor Depth - 5” Basket Depth - 8.5” Displacement - 0.27 cu. ft. Weight - 76 lbs.
M
• • • • • • • • •
A
XXX 15
“It makes all the sounds I want to hear from a subwoofer. It was tight, clean, and imaged perfectly. RE has gone for the gold with their XXX line of subs, and I have to say they earned it!” Quote from a prominent p leading g Car Audio Magazine g
XXX 18 • • • • • • • • •
Mounting Depth - 14.75” Mounting Hole Diameter - 17.375” Overall Diameter - 19” Bolt Hole Circle - 18.25” Motor Width - 10.5” Motor Depth - 5” Basket Depth - 9.75” Displacement - 0.30 cu. ft. Weight - 78 lbs.
7
►Due to continuing product improvement, specifications are subject to change without notice.
Tweeter & Jam Box
TW-1 Technical Specifications • • • • • • •
Nominal Diameter - 3”(25mm) Nominal Impedance - 4 Ohm Frequency Response - 1,500-20,000Hz ± 2dB Sensitivity - 92dB Power Handling - 45W(RMS) Mounting Diameter - 1.73”(44mm) Mounting Depth - 0.95”(24mm)
Precision Engineered The TW-1 Tweeter System contains two(2) 25mm soft dome tweeter units and protection modules that have been precision engineered to produce the highest quality audio for your vehicle.
Technical Design Features • • • • • • •
25mm Soft Dome Tweeter Open Weave Silk Dome Diaphragm Hexatech Aluminum Voice Coil Former Low-Viscosity Ferro-Fluid Cooling Pure Copper Voice Coil Wire Highest Grade Neodymium Magnet Low Resonance Frequency - 1,500Hz
The Name Says It All ! Optimum size, shape, material, port size and length to enable any sub to jam. High grade carpet and a multiple color embroidered logo make for a killer look that will stand out in any vehicle.
† Speaker sold separately.
►Due to continuing product improvement, specifications are subject to change without notice.
UB-10B
UB-12B
Box only (for 10” Woofer) Dimensions: 21x17x17.5
Box only (for 12” Woofer) Dimensions: 21.5x17x21
8
Full-ranges You’ll Hear Things You Never Heard Before Our FR series coaxial speaker systems incorporate a powerful woofer and true soft dome tweeter of the type you may more often find in a sophisticated home loudspeaker system and the response that goes with it.
RE 6x9 FR R • Design & Specifications: 6“x9” • Configuration: 3-Way • Power Handling: 160-200W • Nominal Rating: 80-100W • Frequency Response: 45-20,000Hz 00Hz • Efficiency: 91dB • Impedance: 4 Ohm • fo (Lowest Resonant Frequency): y): 70Hz • Crossover Frequency: 2,500Hz • Mounting Depth: 90mm • Surround: Rubber • Black Polyester Diaphragm: Black ck Silk
RE 5x7 RE 5xx7 5 7 FR FR • Design & Specifications: Specif cification ns: 5“x 5“ 5“x7” 7” • Configuratio Configuration: tion: n 2-W 2-Way -Way • Pow Power er Handling: Handliling Ha ng: 100-12 100-125W -12 125W 125W W • Nom Nomin Nominal inal Rati Rating: ting: ng: 5 50-70W 0-70 0W • Fre Frequ Frequency quenc ncy Response: R Respo ponse ns : 555 55-20,000Hz 20 20,000 0 000 00Hz H Hz • Ef Effici Efficiency: iciency: 9 90dB 0dB • Impedance: 4 Ohm • fo (Lowest Resonant Frequency): 100Hz • Crossover Frequency: 4,500Hz • Mounting Depth: 61mm • Surround: Rubber • Black Polyester Diaphragm: Black Silk
R RE 6x8 FR† (Coming Soon) • Design & Specifications: 6“x8” • Configuration: 2-Way • †Detail Specs: TBA (To Be Announced) ounced)
RE 6.5 FR • Design & Specifications: pecificati tions: ns 6.5 6.5”” • Configuration: n: 2-W 2-Way Way • Power Handling: 100-125W • Nominal Rating: 50-70W • Frequency Response: 55-20,000Hz • Efficiency: 90dB • Impedance: 4 Ohm • fo (Lowest Resonant Frequency): 90Hz • Crossover Frequency: 4,000Hz • Mounting Depth: 64mm • Surround: Rubber • Black Polyester Diaphragm: Black Silk
RE-5 FR • Design & Specifications: 5” • Configuration: 2-Way • Power Handling: 75-100W • Nominal Rating: 35-50W • Frequency Response: 75-20,000Hz • Efficiency: 89dB • Impedance: 4 Ohm • fo (Lowest Resonant Frequency): 100Hz • Crossover Frequency: 4,500Hz • Mounting Depth: 55mm • Surround: Rubber • Black Polyester Diaphragm: Black Silk
9
►Due to continuing product improvement, specifications are subject to change without notice.
BassMekanik & Components
VLS-1 Want More Bass In Your Sound System? Bass Mekanik and US Amps are both synonymous for producing high output, ground pounding, low bass frequencies. Together, we are proud to introduce Bass Mekanik VLS-1: a one band, low frequency, quantum digital processor. Now, your bass can sound the way it was envisioned by the artist. With controls at your fingertips, “You decide when, how deep, and how much”.
XXX-6.5C • • • • • • • • • • • • • • •
RE-6.5C
6.5" component set (2 Ohm)
12dB/Octave Crossover Network High Grade Non-inductive Resistors Tweeter Attentuation Control 6.5" Midbass Driver Rubber Surround Foamed Core Poly Cone Cast Aluminum Basket FEA Optimized Motor Structure Split Coil Design High Linearity Nomex Spider Extreme Exctursion 1" Silk Dome Tweeter Powerful Neodymium Motor on Bass Driver & Tweeter Power Handling (RMS): 150W Power Handling (Peak): 300W
►Due to continuing product improvement, specifications are subject to change without notice.
• • • • • • • • • • • •
6.5" component set (4 Ohm)
12dB/Octave Crossover Network Tweeter Attentuation Control 6.5" Midbass Driver Rubber Surround w/ Mica Filled Poly Cone Pressed Steel Basket FEA Optimized Motor Structure Nomex Spider 1" Silk Dome Tweeter Powerful Neodymium Motor on Tweeter Swiveling Flush Mount Tweeter Power Handling (RMS): 50W Power Handling (Peak): 150W
10
Authorized Dealer
usamps.com / reaudio.com