INSTALLATION INSTRUCTIONS YAMAHA Raptor 700 Dominator Bumper To avoid injury or damage to your ATV, read and understand these instructions completely before installation. 1. Parts List: Item 1 2 3 4
Part Name Bumper Hex Head bolt Button Socket Head bolt Flat Washer
Description
Qty 1 2 2 2
M8 x 20mm M8 x 16mm M8
2. Preparation: a) Set/Lock rear parking brake on bike, make sure vehicle is secure and will not move while installing the bumper. 3. Installation: a) Remove OE plastic bumper and hardware. b) Place replacement bumper in place. c) Use (2) Item #2 and (2) Item #4 in upper mounting locations and loosely tighten. d) Use (2) Item #3 in upper mounting locations and loosely tighten. e) Once fit and clearances have been verified, tighten bolts.
4. Maintenance:
Periodically check all fasteners for tightness and re-torque as required.
5. Care and Cleaning:
Clean using a soft cloth with soap and water
6. Customer service:
For further information call Pro Armor at 951-270-0559 Y063080