Fully equipped pool control system, completely pre-configured.
More functions, more conveniences, superior technology. Simply enjoy the best water!
d i n o t e c
b u s
s y s t e m
For outdoor and indoor pools with Wired ready for connection and pre-assembled
a volume up to about 150 m³
on a plastic wall mounting plate with rapid assembly device
Full control over the water quality
Functions, workflows and settings are clearly and concisely presented.
„ready“ means that you receive a perfectly matched, pre-configured system for control of your swimming pool. Complex system combinations are dispensed with. Due to modern bus technology, the expenses involved in the installation of the dinotecNET+ ready are kept to a minimum. The „intelligent“ system is superior to conventional systems as regards technology, range of functions and modern conveniences. At the same time, the system provides a maximum scope for individualisation. It permits a free choice of the water care method, only the appropriate measurement sets must be connected. In addition, it is possible to further customise the system by means of additional options. All models feature a 5.7'' colour touch screen. Clear, logical menu structures allow an intuitive operation. All processes and parameters are
The colouring of the level indicator allows you to
clearly and concisely presented.
identify the current state at a glance: Blue means
Bus-controlled peristaltic dosage pumps with non-wearing stepper motor.
everything is alright. Yellow means „Reserve“, a refilling is required. Red means: Warning, container is empty.
Simply enjoy the best water!
Everything included! Functions and advantages at a glance
Best water quality, measurement and control of all sanitary parameters.
Party mode - water treatment is carried on also outside the set hours of operation, thereby ensuring an optimum water quality.
Free choice of water care method: chlorine-free (Poolcare) or with chlorine.
Holiday mode: energy-saving operation. Activation and automatic return to normal operation by means of the calendar feature.
Input of water agents as required.
Solar temperature control for heating the pool water by means of solar absorber systems.
Filter control for filters with a filter pump 230/400 V up to 4 kW, with integrated time switch for filter running times.
Solar temperature control for cooling the pool water over night by means of solar absorber systems.
Peristaltic dosage pumps, bus controlled, with non-wearing stepper motor.
Graphical display, information comprehensible at a glance, intuitive operation.
Peristaltic dosage pumps with integrated measurement of level in container (in cm). Alarm via system bus.
Dosing time control for preventing uncontrolled dosing.
Economical use of resources.
All measured data is stored for more then 1 year.
Expandable to meet future requirements.
Connection to a PC, router, printer; direct data transmission via DSL possible.
Heating: Measurement of the pool temperature and control of heating circulation pump / 3-way valve.
And more ...
More individuality, more conveniences: optional features
Second, larger touch screen for (remote) control of your entire system from the indoor pool or any other room.
You also own a whirlpool? No problem with the dinotecNET+ ready measuring and control technology for a second pool circulation.
Control your attractions, such as counter current systems, massage nozzles or lighting with the attraction control for up to 3 attractions and 1 floodlight array (up to 600 W). Only together with a second touch screen.
Accessible worldwide. Information retrieval and setting of current values as well as alarm messages via SMS.
Full accessibility to all functions of the system via fixed line.
Improve the filtration performance by means of flocculation! Flocculant dosing station, bus-controlled, 3 – 3000 ml/h.
Balance tank control for pools with overflow gutter. With hydrostatic measured value logging of level.
Control of overflow channel cleaning. Input for key switch.
Automatic filter backwash with lit display for valve size 1 ½“, 2“ or 3“.
Simply enjoy the best water!
Technical data: Mains voltage: Power consumption: Protection class: Dimensions housing (w x h x d): Weight: Permissible ambient temperature: Permissible humidity: Storage temperature pH electrode: Control outputs: Operation: Display: Language: Wall mounting plate:
85 – 265 V/AC (48-63 Hz) 50 VA IP 65 approx. 500 x 300 x 150 mm approx. 2.5 kg up to +50 °C -20 °C to +65 °C max. 90 % at +40 °C (non-condensing) -5 °C to 40 °C proportional via bus via touch screen colour graphic display 640 x 480 px multilingual with rapid assembly device, pre-assembled 720 x 720 mm
Poolcare (active oxygen) meter and controller (Poolcare version, chlorine-free): potentiostatic with Poolcare electrode (3-electrode system) Measurement of oxididant: Measuring range: 0 – 99 mg/l Poolcare Resolution: 1 mg/l Control type: PID Continuous dosing monitor: adjustable Electrode check: by means of compensation of the slope (slope control) manual by measurement of the actual content of Poolcare at the measuring cell outlet or in the pool Calibration: Chlorine meter and controller (chlorine version): potentiostatic with chlorine electrode (3-electrode system) 0.0 – 4.0 mg/l chlorine 0.01 mg/l PID adjustable by means of compensation of the slope (slope control) Electrode check: Calibration: manual by measurement of the actual content of free chlorine at the measuring cell outlet or in the pool
Measurement of oxidant: Measuring range: Resolution: Control type: Continuous dosing control:
pH meter and controller: pH measurement: Measuring range: Resolution: pH control direction: Continuous dosage control: Temperature compensation: Slope control:
via combined electrode with KCL filling 0 – 14 pH 0.01 pH pH raise/pH reduce (switchable) adjustable
Calibration: Electrode check:
yes yes manual with calibration solution pH 7.0 and pH 4.0 by means of compensation of slope and zero shift, control of slope and zero point
Alarm:
alarm relay (collective alarm) with voltage-free two-way contact
Dosage pump:
dinodos START LEVEL BUS
Until June 2008, the dinotecNET+ ready system is supplied with the Easydos
Pump type: Motor: Capacity:
CONCEPT peristaltic dosage pump. peristaltic dosage pump stepper motor, non-wearing max. 8.5 l/h with a counter pressure of max. 1.5 bar (adjustable 10 - 100 %)
Filter control: Time switch: Backwash:
weekly timer freely adjustable, max. 20 switching times manual, optionally automatic (with automatic backwash device Combitrol IMPULS)
Temperature control: Setting range: Switching output (heating): Collector sensor: Switching output (solar): Priority circuit 'solar'
+5 °C to +40 °C voltage-free two-way contact optional -50 °C to +150 °C voltage-free two-way contact adjustable via menu:
Simply enjoy the best water!
Background photo: Water photo no. 1 Artist: Thomas Kuhn
dinotec GmbH Water and Pool Technology Spessartstr.7 63477 Maintal/Germany Telephone: +49(0)6109-6011-0 Fax: +49(0)6109-6011-90 E-mail: mail@dinotec.de www.dinotec.de Subject to technical changes. Errors excepted! 02/2008
Simply enjoy the best water!
RH/Rehms – 1 – 04/08
Your dinotec specialist dealer: