Accessories: Wiper Motors
Wiper Motors The motor choice is based primarily on the size of the windshield and where the motor is to be installed, either in an exterior or interior location. Marinco® motors are split into three categories, Standard, Heavy-Duty, and Heavy-Duty Plus, with the categories categories. Within the three categories, there are motors designed for interior or protected installations, and motors designed for exterior installations. With the addition of the 3.0 motor, we offer wiper motors for all windshield sizes up to 45", which could be covered by a 30" arm and 30" blade combination, driven by a 3.0 motor. The Standard motor category includes the STD, WMW, and able to drive a 14" arm and a 14" blade. The differences in the motors relate to their casings and the appropriate installation applications. The STD is designed to be used in interior or well protected locations. The WMW, with its chrome-plated brass outer housing, provides protection for exterior installations that have some protection. The 500 motor, with its thermoplastic, watertight housing, is ideal for any light-duty, external installation where the motor is constantly exposed to the elements. When coverage of a larger windshield is required, Marinco offers the Heavy-Duty motors, which are capable of driving a wide range of arm and blade sizes, up to a 26" x 26" Deluxe arm and blade combination, which would cover windshields up to 39" with
the 2.5 motor. The MRV is built for interior or well-protected locations, and has the power to pull a 22" X 22" Deluxe arm and 16" Deluxe arm and blade combination. While not as powerful as the MRV, it is waterproof, with the high-density thermoplastic housing offering complete protection from the elements. The 1.5 motor has the power to pull a 22" x 22" Deluxe arm and blade combination like the MRV, but is waterproof and built for exposed installations. The 1.5 motor has a powder-coated aluminum base fourth motor is the 2.5 motor and has the same features as the 1.5 motor (waterproof, powder-coated aluminum housing, etc.), with the added power to drive a longer (26") Deluxe arm and blade combination. The 3.0 motor is the motor that makes up the Heavy-Duty Plus category. A wiper motor for internal installations, the 3.0 motor has an external linkage shaft drive that gives it the power and torque to drive a 30" Premier pantographic arm and Premier blade combination. See the following catalog pages for a full set
Choosing the Right Motor Model Voltage Speeds 12 & single 24V
3.0
Stall Torque/ Stall Current 165 in-lbs 12.5–14.5 amps
Compatible Blade Lengths 30" Premier Plus single or pantographic
Available Shaft Lengths Sweep Angles 2.5" Factory preset to 110° 3.5"
2.5
12 & 24V
2 speed
139 in-lbs 9–10.5 amps
26" Deluxe 24" Premier
1.5" 2.5"
Factory preset: 80° or 110°
fully sealed powder coated aluminum
1.5
12 & 24V
2 speed
109 in-lbs 11.5–13 amps
22" Deluxe 20" Premier
1.5" 2.5" 3.5"
Factory preset: 80° or 110°
fully sealed powder coated aluminum
1000
12V
single
55 in-lbs 9.8–10 amps
16" Deluxe 18" Premier
1.5" 2.5"
Factory preset: 80° or 110°
fully sealed, UV stabilized hi-temp thermoplastic
MRV
12 & 24V
2 speed
109 in-lbs 11.5–13 amps
22" Deluxe 20" Premier (at 80° sweep)
1.5" 2.5" 3.5"
Factory preset: 80° or 110°
80° or 110°
234
Accessories.indd 234
Housing external linkage – no housing
(but can be operated as 1)
Corrosion resistant cast housing
80°, or 110°
500
12V
single
—
14" Deluxe
2.5"
Factory preset: 80° or 110°
fully sealed, UV stabilized hi-temp thermoplastic
WMW
12V
single
—
14" Deluxe
2.5"
Factory preset: 110°
chrome plated brass case
STD
12V
single
—
14" Deluxe
2.5" 3.5"
Factory preset: 80° or 110°
corrosion proof aluminum alloy case
toll free 800.307.6702
MASTERVOLT | mastervolt.us
MARINCO | marinco.com
9/28/11 11:46 AM