Pichler Tools - Catalogue EN by Bernhard Lammer

engine, cylinder head, valves

electric, injection

gearbox, clutch, steering, oil service

springs, shock absorber, axels, silent bearings

brakes, tyres, exhaust

cooling system

body, upholstery

test and measuring equipment

fitting tools

chipping tools

g.com

erkzeu ichler-w .p w w w

Austria

Switzerland

France

Belgium

Pichler Werkzeug GmbH & Co KG Pacherstrasse 20 A - 6023 Innsbruck

Pichler Werkzeug AG RĂźnenbergerstraĂ&#x;e 31 CH - 4460 Gelterkinden

Pichler Outillage Sarl 19, rue de Reiningue F - 68310 Wittelsheim

Pichler Outillage BVBA Industrieweg 45 B - 8800 Roeselare

Tel.: +43 512 344 552 Fax.: +43 512 393 762 info@pichler-werkzeug.com

Tel.: +41 61 981 33 55 Fax.: +41 61 981 12 86 pichler@werkzeugag.ch

Tel.: +33 3 89 551 596 Fax.: +33 3 89 552 438 pichler@pichler.fr

Tel.: +32 51 250 828 Fax.: +32 51 250 829 pichler.belgique@pichler.fr

Engine lift- and alignment equipment Carrying capacity: 900 kg Angle of inclination45° Weight: 1,7 kg Drive: 1/2" □ Load adjustable engine lifting equipment. By use of a patented unwind stand -roll coil. The alignment tool when used along with present workshop lifting equipment allows fast and safe inclining of the engine in both directions. The tool can be locked in the correct position by use of the 1/2“ security lever Engine lift- and alignment equipment

p/n 608 23 00

Universal support tool for engines and sub frames A support tool recommended by Honda Switzerland particularly for use on the sub frames of Honda vehicles. This tool is also an outstanding universal auxiliary tool for all passenger vehicles, where the engine, gearbox or sub frame must be unscrewed and/or dismantled. The device has four arms which are adjustable in length and can laterally tilt. On the arms it is possible to mount guide pins or rubber plates. The support is best used with hydraulic engine and transmission jack p/n: 975 00 00. Universal support tool for engines and subframes p/n 911 32 00

Compression tester Compression tester model O (0...25 bar) for petrol engines, with a flexible hose and an outside thread p/n 609 10 00 M 12x1,25, M 18x1,5 and M 14x1,25 compression tester model D (0...60 bar) for diesel engines, with a flexible hose and an outside thread p/n 609 11 00 M 14x1,25, M 18x1,5 and M 24x2

Compression tester Metering range model O 3-15 bar (petrol engines) model D 10-50 bar (diesel engines) Handy recording instrument with sturdy metal housing for measuring compression. With a push button switch on the hand grip and a remote start cable it is possible for one person to both start the engine and record the compression. Compression tester model O ( petrol engines) contents: 1 compression writer model basic unit O with electric push button switch in the grip 1 extension inflexible 120 mm long, 1 extension flexible 400 mm long. 1 replacement rubber cone sparkplug 20,8 mm 1 replacement rubber cone sparkplug 15,9 mm 1 remote start cable for starter operation 100 diagram cards 3-15 bar Compression tester model D ( diesel engines ) contents: 1 Compression writer model basic unit D with electric push button switch in the grip 1 flexible pressure hose with valve 1 angled coupling M 12x1,5 1 angled coupling M 14x1,5 1 diesel adapter dim.1 (injector) 1 remote start cable for starter operation 100 diagram cards 10-50 bar

Compression test adapter D Compression test adapter diesel The adapter is mounted in place of the injector or glow plug. With a thread M 12 x 1,5 to connected to the compression writer model D p/n 609 16 00. D= injector G= glow plug Dim. 1D 2G 3G 4D 5G 6G 7D 8G 9G 11 G 12 D 13 D 15 D 16 D

measure M24 x 2 M12 x 1,25 M18 x 1,5 M24 x 2 M10 x 1,25 M10 x 1,25 M20 x 1,5 M10 x 1 M10 x 1 M10 x 1,25 M24 x 2 M22 x 1,5 M24 x 2 M24 x 1,5

17 D 18 D

M22 x 1,5 inserted

MB, Ford 1.8 D/TD, Opel, Peugeot, Renault 1.9/2.1 GTD, VW Standard PKW, BMW M51 engine, Renault R21, 25, Espace, Trafic older passenger cars Mazda, Mitsubishi, Nissan, Toyota B-C-H engine Isuzu, Mitsubishi, Nissan, Toyota L engine Toyota C-B-H engine Mitsubishi, Toyota C engine BMW engine M47/M57, Audi/VW 1.4, 1.9 and 2.5 TDI Audi, VW, Skoda, Seat 2,5l V6 TDI Opel Isuzu engine 1.5 D/DT, 1.7 TD Opel, not Isuzu engine 1.5 D/DT, 1.7 TD, VW with 1,3 engine, Polo VW 1.7, 1.9 engine, Renault 1.9TD. BMW, VM engine 2,5 TD, e.g.: Alfa, Ford, Fiat Chrysler Cherokee, Voyager, Opel Frontera, Renault Safrane 2.5 TD, Rover, Landrover, Lancia MB from 601 / 602 / 603 with power up rating Ford Transit 2,5 TDI

Type p/n 609 16 20 p/n 609 16 30 p/n 609 16 40 p/n 609 16 50 p/n 609 16 60 p/n 609 16 70 p/n 609 16 80 p/n 609 16 85 p/n 609 17 96 p/n 602 15 20 p/n 609 17 20 p/n 609 17 30 p/n 609 17 50 p/n 609 17 65 p/n 609 17 70 p/n 609 17 80

p/n 609 15 00 p/n 609 15 10 p/n 609 18 00 p/n 609 18 20 p/n 609 18 40 p/n 609 18 70 p/n 609 18 30 p/n 609 18 50 p/n 609 16 00 p/n 609 16 10 p/n 609 19 00 p/n 609 19 10 p/n 609 19 20 p/n 609 16 20 p/n 609 19 40 p/n 609 19 50

19 G 20 D 21 G

M12 x 1,25 M22 x 1,5 M10 x 1

22 D 23 G 24 G 25 G 26 G 27 D 31 G 32 D 33 G

Ø 19/22 M10 x 1,25 M10 x 1 M10 x 1 M10 x 1 inserted

34 G 35 G 36 D 41 D 42 D 46 D 49 G

M10 x 1,0 M8 x 1 M22 x 1,5 inserted inserted

51 G

M10 x 1,25

52 G

M10 x 1,0

54 G

M8 x 1,0

55 G 58 D 61 D

M8 x 1,0 inserted inserted

63 D 62 D 65 D 66 G 66 D

inserted inserted inserted M8 x 1 inserted

67 D 68 G 79 D

inserted M10 x 1 inserted

80 D 81 D 94 D

inserted inserted inserted

M9 X 1

MB from M 601 / 602 / 603 p/n 609 17 91 MB from M 604 (four valve) p/n 609 17 90 Audi / VW 1,9 / 2,5 TDi 3 cyl. 1,4 TDi, PD engine p/n 609 17 92 Volvo 850, Ford Galaxy, Seat Alhambra, Grommet commercial vehicles p/n 602 17 50 Opel SOHC X 20 DTL p/n 609 17 25 Opel SOHC X 20 DTL / DTH from `98 100 PS p/n 609 17 27 MB M 611, 612, 613 CDi engines p/n 609 17 75 Peugeot u. Citroen with HDi engine p/n 609 17 85 Citroen HDI p/n 609 17 87 Ford 1.8 TDCi Dura Torq engine p/n 609 17 31 Ford 1.8 TDCi Dura Torq engine p/n 609 17 32 Alfa Romeo 145, 146, 147, 156,166, Fiat Brava, Bravo, Marea, Marengo, Multipla, Punto, Stilo and Lancia Lybra with 1,9 JTD and 2,4 JTD engine p/n 609 17 33 Ford 2.0 TDCI / Transit 2,4 TDCI p/n 609 17 81 Ford 1.4 TDCI Diesel, Citroen C3 HDI p/n 609 17 82 Ford 2.0 TDCI / Transit 2,4L TDCI (not common rail system) p/n 609 17 83 Renault Clio 1,5 CDi (65 and 85 PS) p/n 609 17 41 Renault Laguna 1,9 DTi p/n 609 17 42 Citroen & Peugeot 2,0 / 2,2l HDI 16V p/n 609 17 46 Alfa Romeo, Fiat, Lancia with 1,9 JTD 16 V engine and identical constructed Opel vehicles (MC Z19DT+Z19DTH) p/n 609 17 34 Opel Astra G, Corsa C, Meriva & Combo with Y17DT + Y17DTL engine, Honda Civic from 01/2002 1.7 CTDi engine code 4EE-2 p/n 609 17 510 Fiat 1,9l JTD 8V from 2000 in the Bravo, Brava, Doblo, Idea, Marea, Multipla, Punto II, Sedici and Stilo, Alfa 1,9l JTD 8V & 2,4l JTD 10V from 00` in the 145, 146, 147, 156 & 166, Lancia 1,9l JTD 8V & 2,4l JTD 10V from ‘00 in the Kappa,` Lybra, Musa & Thesis p/n 609 17 335 MB CDI V6 2,8l + 3,2l engine code OM 642 in the new C-, E-, M-, R-, S class, new Sprinter and Viano MB CDI 4 cil. 1,6l, 1,8l and 2,0l engine code OM 640 in the A- and B-class, CDI 4,2l with engine code OM 629 in the new CLS-, E-, GL-, M-, ML- and S-class p/n 609 17 540 Smart-Diesel p/n 609 17 550 Fiat Ducato 2,8l JTD C-Rail p/n 609 17 58 MAN engine 2866, 2566, MB engines OM 401 / 7 / 9, 421 / 7 / 9, 441 / 7 p/n 609 17 61 MAN D2876 LF 03 p/n 609 17 63 MB engine OM 314, 346, 352, 360, 362, 364, 366 p/n 609 17 62 Opel Corsa C 1,3 D Mc: Z13DT, Fiat 1,3 D Multijet p/n 609 17 21 Opel Corsa C 1,3 D Mc: Z13DT, Fiat 1,3 D Multijet p/n 609 17 22 Alfa Romeo 156, 166, Fiat Marea, Marengo and Lancia Lybra with 2,4 JTD engine p/n 609 17 66 Opel Movano, Renault Master 2,2 DTI/CDI, e.c.: G9T720 `00 - `03 p/n 609 17 28 Opel Movano, Renault Master 2,2 DTI/CDI, e.c.: G9T720 `00 - `03 p/n 609 17 29 Fiat Ducato 2,5 TDi, Maxi D/DT `86-94 p/n 609 17 95 Opel Movano, Nissan Interstar, Renault Master Renault Fuego D p/n 609 17 88 Renault 18D, 20D, 30D and Master p/n 609 17 89 MB E290 / Sprinter with 5-cyl. direct injection p/n 609 17 94 (OM 602.982, OM602.980)

Accessories for compression tester Adapter Model A with valve, inner thread M 12 x 1,5 - quick coupler SW adapter / Motometer writer with quick coupler p/n 609 15 80 Model B inner thread M 12 x 1,5 - outside R1/4" SW adapter / Motometer writer with thread

p/n 609 18 90

Model. C inner thread M 12 x 1,5 - quick coupler SW adapter / SW pressure loss tester p/n 6096550 p/n 609 17 05 Extensions for compression tester model O Ext. with rubber cone and thread connector 270 mm p/n 609 18 10 Ext. with rubber cone and quick coupler 270 mm p/n 609 18 15

Pressure loss tester model 3 Handy device with 1m hose and quick coupler and a manometer protected by a rubber cap (Ă&#x2DC; 80mm), can be calibrated With this equipment it is possible to quickly determine engine failures. Appropriate connecting adaptor must be specially ordered according to engine type e.g. the universal compressed air adapter (spark plug) p/n 609 63 50 Type : Universal Pressure loss tester model 3

p/n 609 65 50

Oil pressure tester model KU The tester is connected in place of the oil pressure switch, in order to test the oil pressure. The basic equipment consists of: * Manometer 0-10 bar, Ă&#x2DC; 80 mm, with rubber cap, p/n 609 26 60 * Hose with quick coupler, 500 mm, p/n 609 29 15 * Angled adapter p/n 609 28 20 Adapter connection type ANK 4 M10 x 1,0 Audi, VW, BMW, Alfa Romeo, MB, Porsche p/n 609 28 30 ANK 40 M18 x 1,5 Peugeot, Renault, Volvo p/n 609 28 80 ANK 18 M12 x 1,5 Autobianchi, BMW, Citroen, Fiat p/n 609 28 40 ANK 19 M14 x 1,5 Alfa Romeo, DAF, MB, Fiat, Lancia, Opel, Renault, Volvo p/n 609 28 50 ANK 62 3/8" x 24 UNF Ford, Jaguar, Rover p/n 609 28 62 ANK 20 1/8" x 27 NPTF Chrysler, Ford, Mazda, Volvo p/n 609 28 55 ANK 39 1/4" x 27 NPTF Alfa Romeo, Ford, Saab, Volvo p/n 609 28 70 ANK 47 1/8" x 28 BSP Honda, Mazda, Nissan, Opel, Toyota p/n 609 28 90 ANK 63 1/2" x 20 UNF Pontiac p/n 609 28 63 ANK 53 M16 x 1,5 Citroen, Peugeot, Renault, p/n 609 28 10 Oil pressure tester model KU p/n 609 29 60

Accessories for oil pressure tester model KU Pressure relief valve as intermediate piece to relieve the oil pressure and for bleeding long hose connections. Angled adapter with quick coupler for hard to reach places. Pressure relief valve for oil pressure tester Angled adapter with quick coupler Flex. hose with quick coupler 500 mm Flex. hose with quick coupler 1000 mm Flex. hose with quick coupler 3000 mm (for measurements during test drive)

p/n 609 29 40 p/n 609 28 20 p/n 609 29 10 p/n 609 29 15 p/n 609 29 30

Adapter for oil pressure tester model. K Adapter for oil pressure tester model SK One side with quick coupler (NW 5), second side with outside thread see the table. Type Alfa-Romeo

Audi Austin Bedford BMW British-Leyland Chrysler Citroen

Daewoo DAF Daihatsu Fiat Ford

Ford Zetec General Motor Pontiac Honda IHC-Schlepper Innocenti Isuzu Lada Lancia MAN Mazda

thread

ANK

p/n

M 14 x 1,5 M 10 X 1 R 1/4 x 18 NPTF M 10 x 1 cone short M10 X 1 R 1/8 x 27 NPTF M 14 x 1,5 R 1/4 x 18 NPTF M 12 x 1,5 M 10 X 1 R 1/4 x 27 NPTF R 1/8 x 27 NPTF R 1/8 x 27 NPTF M 12 x 1,5 M 14 x 1,5 M 16 x 1,5 M 18 x 1,5 M 14 x 1,5 M 14 x 1,5 R 1/8 x 27 NPTF M 12 x 1,5 M 14 x 1,5 R 1/8 x 27 NPTF R 1/4 x18 NPTF M 8 x 1,25 M 10 x 1, cone short R 1/8 x 27 NPTF ¼ x 18 NPT R 1/8 x 28 BSPP M 10 X 1 R 1/8 x 27 ASSIT R 1/8 x 28 NPTF M 14 x 1,5 M 12 x 1,5 M 14 x 1,5 M 10X1 M 18 x 1,5 G 1/8 x 28 BSP

19 04 39 44 04 20 19 39 18 04 39 20 20 18 19 53 40 19 19 20 18 19 20 39 55 44 20 60b 47 04 48 56 19 18 19 04 40 47

609 28 50 609 28 30 609 28 70 609 28 84 609 28 30 608 28 55 609 28 50 609 28 70 609 28 40 609 28 30 609 28 70 608 28 55 608 28 55 609 28 40 609 28 50 609 28 10 609 28 80 609 28 50 609 28 50 608 28 55 609 28 40 609 28 50 608 28 55 609 28 70 609 28 15 609 28 84 609 28 55 609 36 00 609 28 90 609 28 30 609 28 73 609 28 16 609 28 50 609 28 40 609 28 50 609 28 30 609 28 80 609 28 90

R 1/8 x 27 NPTF

608 28 55

Type Mercedes-Benz

Mitsubishi MWM Nissan Opel

Z 22 SE engine Peugeot

Porsche Renault

Saab Scania Seat Skoda Steyer-Daimler Talbot

Toyota Vauxhall

Volvo

VW Yucio (Zastava)

thread

ANK

p/n

M 14 x 1,5 M 10 x 1 M8 x 1 R 1/8 x 28 BSPP

19 04 52 47

609 28 50 609 28 30 609 28 09 609 28 90

M 10 x 1 R 1/8 x 28 BSPP R 1/8 x 27 NPTF R 1/8 x 28 BSPP M 14 x 1,5 M 14 x 1,5 cone ¼ x 18 NPT M 12 x 1,75 M 18 x 1,5 M 16 x 1,5 M 8 x 1,25 M 10 X 1 M 14 x 1,5 M 18 x 1,5 M 16 x 1,5 R 1/4 x 18 NPTF M 14 x 1,5 M 12 x 1,5 M 10 x 1 M 10 x 1 M 10 x 1 M 12 x 1,5 M 12 x 1,5 M 18 x 1,5 R 1/8 x 28 BSPP M 14 x 1,5 cone M 14 x 1,5 R 1/4 x 18 NPTF M 10 x 1 M 14 x 1,5 R 1/4 x 27 NPTF R 1/8 x 27 NPTF M 18 x 1,5 M 10 x 1 M 12 x 1,5

04 47 20 47 19 50 60b 61 40 53 55 04 19 40 53 39 19 18 04 04 04 51 36 40 47 50 19 49 04 19 39 20 40 04 36

609 28 30 609 28 90 608 28 55 609 28 90 609 28 50 609 28 07 609 36 00 609 28 51 609 28 80 609 28 10 609 28 15 609 28 30 609 28 50 609 28 80 609 28 10 609 28 70 609 28 50 609 28 40 609 28 30 609 28 30 609 28 30 609 28 08 609 28 56 609 28 80 609 28 90 609 28 07 609 28 50 609 28 75 609 28 30 609 28 50 609 28 70 609 28 55 609 28 80 609 28 30 609 28 56

Oil pressure tester for automatic transmission The connection is made with the transmission oil circuit. Type: e.g. BMW, Ford, Honda, Mercedes, Mitsubishi, Opel and Renault. Contents: Precision manometer with rubber cap 0 – 25 bar 3m pressure hose, 6 adapter (ANK 4, 18, 20, 55, 60, 61) Oil pressure tester for automatic transmission p/n 609 29 80

Timing belt tester For controlled adjustment of the timing belt tension. This is absolutely necessary, in order to avoid damage, (e.g. of the water pump or of the valve gear) and the running noise of the timing belt. Type : particularly diesel-engines Timing belt tester

p/n 608 45 00

Timing Timing belt tester for belts up to 30mm Universal with 8 inserts This timing belt test tool examines the tension very exactly and is universally suitable for belts up to 30 mm thick. This kit is recommended by ‘’Gates’’ for timing belt testing Timing belt tension tester

p/n 908 44 20

Timing belt tension meter with sensor and display in „Newton“ The measuring instrument determines by pneumatic pressure the toothed belt tension in ’’Newton longitudinal force“. The sensor measuring head is constructed in such a way that it can be installed in nearly all engine compartments without complex disassembly. The digital manometer is programmable to the customer's wish and possesses an external interface to exchange data with a computer or a printer. Beside battery operation it is also possible to run the meter using a 12 V car battery. ADVANTAGES: • Applicably for timing belts of all usual cars • Measurement during tensioning of the timing belt • Acoustic and optical signal when a successful measurement is reached.

Timing belt tension meter with sensor and display in „Newton“ sensor testing with vacuum p/n 908 45 00

Timing belt tester "Elektronik" model 3 For testing of the timing belt tension. The electronic and specialy adjusted software provide for a high repetition accuracy of the results of measurement over a large measuring range. Thus a reliable determination of the timing belt tension is reached. The existing type list can be supplemented partially by comparison with existing measured values. This is a professional device for workshop use and is universally applicable. It has a clearly arranged digital display and a 700mm feed cable attached to the robust measuring head. The special measuring head makes it possible also to test difficult to reach timing belts. The limit stop provides for a long service life of the standard 9V battery. The contact pressure of the feeler is specified by torque delimitation in the measuring head, thus continuous measuring conditions are created and prevent a faulty reading. With an extensive type list the broad measuring range will also permit the examination of future motor vehicle types.

Timing belt tester "Elektronik" model 3

p/n 608 44 50

In a plastic case

Timing belt adjustment keys PSA Timing belt adjusting key 8mm 4-sided drive, 15mm hexagon, length 35mm

p/n 908 42 08

Timing belt adjusting key 7mm 4- sided drive, 15mm hexagon, length 35mm

p/n 908 42 11

Timing belt adjusting key 7mm 4- sided drive, 15mm hexagon, length 70mm

p/n 908 42 12

Timing belt adjusting key 6mm 6- sided drive, 15mm hexagon, length 35mm

p/n 908 42 13

Timing belt adjusting key 10mm 4- sided drive, 15mm hexagon, length 70mm

p/n 908 42 14

Timing belt adjusting key 15mm hexagon set 3-pcs. consisting of 9084211_12_13 p/n 908 42 15 Timing belt adjusting key 15mm hexagon set 5-pcs. consisting of 9084208_11_12_13_14 p/n 908 42 17

Timing belt adjust spanner 15 hexagon length 550 mm p/n 604 84 15

Timing belt adjustment key Type: Renault petrol engine 2.0 l 16V Timing belt adjust key tapered 9,5 â&#x20AC;&#x201C; 10mm 13 hexagon length 47mm

p/n 908 42 25

Allen key 8mm short For the timing belt tension pulley on the FORD Mondeo Allen key 8mm short collet 13mm

p/n 608 93 16

Multi-rib belt tensioner model R To pretension the spring loaded multi-rib belt tensioner. Thus the multi-rib belt is eased and can be removed and/or changed. Without this multi-rib belt tension adjuster it is impossible to press back the difficult to reach tensioner. Type:

1,9 DCi engine with e.c.: F9Q e.g. in Renault Megane, Master, Trafic, Laguna, Scenic

Multi-rib belt tensioner model R

p/n 604 84 22

Tension pulley adjust tool model F For adjusting the timing belt tension. Type : 1.6 16V `95-03, Brava, Bravo, Marea, Marea Weekend Multipla, Stilo Tension pulley adjust tool model F

p/n 608 43 30

Pulley extraction set 12 pcs. For pulleys on air conditioning compressors. With most automobile manufacturers offering air conditioning even on their smallest vehicle air conditioning repair has become an important topic in the workshop. This versatile set helps to extract the majority of air conditioning compressor pulleys. Pulley extraction set 12 pcs. universal

p/n 949 49 90

Pulley extraction set Pulleys Ă&#x2DC; till 195 mm Extraction dept two-stage 68 / 88 mm Universal pulley extractor. Due to the small overall height and the special extractor hooks this tool is particularly suitably for confined spaces. With replaceable thrust pieces, in different lengths, a spindle extension and special extendable hooks it is possible to adapt the extractor to the pulley.For pulleys with tapped holes the second extraction bridge is mounted directly. Pulley extraction set in a plastic case

p/n 604 87 60

Vibration damper / pulley extractor model T4 For extracting the vibration damper e.g. when exchanging a defective vibration absorber. With purpose-built extraction arms to wedge into the ribbed belt profile of the vibration damper. Wedges under the extraction arm fixing bolts increase the contact pressure to the vibration damper. The puller supports itself over the stabilizer base on the 4 bolts that are screwed into the pulley. Thus an unintentional extraction of the timing belt pulley from the crankshaft is prevented and a timing adjustment is not required. Type: VW T4 from 2/96 and identically constructed models partially for the 2,4, 2,5 engines in A6 and also the first Audi 100 Vibration damper / pulley extractor model T4 in a plastic case

p/n 604 87 80

Timing belt tension pulley spanner model UNV 155 mm long x 3/8" ďż˝-drive

Solid tension pulley spanner, for difficult to reach tension pulleys. The spanner has an additional 3/8" ďż˝ - drive and so can be extended at will. Type : Audi/VW e.g.. Golf Vento 1,5 - 1,9 L, 1,9 L Diesel in the T4 Timing belt tension pulley spanner model UNV p/n 608 41 50

Multi-rib belt spanner 15, 16, 17 & 19mm 550mm long The tensioner is pressed back with the spanners for examination and while changing the multi-rib belt. Type : Audi / VW e.g. : Audi A4, VW Passat from `97 with TDI or pump-injector-engine (Without having to bring the radiator unit to the service position.) Opel DOHC 4- / 6cylinder, Mitsubishi, Saab V6 engines Multi-rib belt spanner 15mm Multi-rib belt spanner 16mm Multi-rib belt spanner 17mm Multi-rib belt spanner 19mm Multi-rib belt spanner set 4 pcs. Multi-rib belt spanner set 2 pcs. (15 & 17mm) Multi-rib belt spanner set 3-tlg. (15, 17&19mm)

p/n 604 84 15 p/n 604 84 16 p/n 604 84 17 p/n 604 84 19 p/n 604 84 45 p/n 604 84 20 p/n 604 84 40

Special belt tensioning pulley spanner Ratchet ring spanner for use with 3/8” drive ratchets etc. This tool is specific to bolts of type LH-10S, which are used on the belt tensioner of Toyota vehicles with the following engines: 1ZZ (1.8L), 1AZ (2.0L) and 2AZ (2.4L) Type: Toyota with LH-10S screw Belt tensioning pulley spanner TOYOTA with LH-S10 screws p/n 908 42 60

Pulley reaction wrench

1/2" �-drive x 255 mm long To brace the pulley and to unscrew the fixing bolt. The rubberized grip with additional � - drive facilitates the loosening of seized screws. Model 1 water pump Type : Audi 80, A4, VW Polo, Golf III, Passat Mod. 2 ZF servo pump / water pump Type : Audi/VW Pulley brace model 1 Pulley brace model 2

p/n 608 96 10 p/n 608 96 20

Viscous coupling reaction wrench model A 385 mm lg. Special long sturdy pin wrench with adjustable legs for arresting the pulley during viscous coupling disassembly and assembling. Install the fan hub with an 8mm Allen key or viscous coupling jaw wrench model B p/n 608 97 60. Type : Audi 100, A4 from `95, A6 from `98, A8, V8 VW Passat from `97 Visco coupling reaction wrench model A with two pair cone points Replacement cone point till 08.2004 Replacement cone point from 08.2004

p/n 608 97 90 p/n 608 97 91 p/n 608 97 92

Viscous coupling reaction wrench 46mm For removing the fan bolts. For use on the newer type viscous couplings which are supplied with a 46mm nut. Type : Audi / VW with longitudinal engine Viscous coupling reaction wrench 46mm

A 10

p/n 608 97 80

TDC adjusting help model 1 Total length 680 mm. Press the rubber cone of the adjuster into the spark plug hole. Then turn the engine slowly by hand.The level indicator can now be recognized by the floating element (signal piston), when TDC is reached. TDC adjusting help model 1

p/n 430 12 20

Camshaft pulley extractor model 5 For the disassembly of the camshaft pulley during work on the motor distribution e.g. timing belt change. The spreading cone provides for safe hold of the puller. Because of the additional supporting butt-strap the puller can be used also as an asymmetrical or 2 arm extractor. Type : Universal, specially Audi V6 Camshaft pulley extractor model 5

p/n 430 65 50

Camshaft pulley extractor model 6 Used for the undamaged extraction of 5 and 6 spoke camshaft pulleys. With a centring ball in the spindle and headless screws for fixing the extraction arms. Type : Audi / VW 4- / 6 cyl. TDi engines, V6- / V8- engines e.g. A4, A6, A8, VW Golf, Passat, Porsche Cayenne Camshaft pulley extractor model 6

p/n 430 65 70

Camshaft gauge model 6 For adjusting the cam shaft, e.g. during timing belt change without disassembly of the valve cover. The gauge is screwed onto the cylinder head and grips into the cam shaft Type : Audi / VW 5 cyl. TDi engine, e.g. LT, T4 Camshaft gauge model 6

p/n 430 13 05

Timing tools model CP For blocking and adjusting cam, crankshaft and injection pump during work on the motor distribution e.g. timing belt change. Also contained in the set is an assembly clip, special for fixing the timing belt to the crankshaft pulley as well as a crankshaft pulley puller specific to PSA HDI engines. Type : Citroen/Peugeot petrol and diesel engines incl. HPI and HDI engines Timing tools model CP 21 pcs. in a case

p/n 430 24 00

A 11

Timing tools model F For blocking and adjusting camshaft, crankshaft and injection pump during work on the motor distribution e.g. timing belt change. Model FA Type : Fiat 1,7l D/TD from `96Model FB Type : Fiat 1,9l D from `87Model FC Type : Fiat und Alfa 1,9l TD from `87Model FA 4 pcs. Model FB 4 pcs. Model FC 4 pcs.

p/n 430 23 80 p/n 430 23 83 p/n 430 23 86

Timing tools model F For blocking and adjusting camshaft, crankshaft during work on the motor distribution e.g. timing belt change Model FE Type : Fiat Brava, Bravo, Marea + We, Barchetta and Coupe 1,8l 16V petrol Model FF Type : Fiat Brava, Bravo, Marea + We/Multipla and Palio 1,6l 16V petrol Model FE 6 pcs. Model FF 5 pcs.

p/n 430 23 60 p/n 430 23 50

Timing tools model F For blocking and adjusting camshaft, crankshaft and injection pump during work on the motor distribution e.g. timing belt change. Model FG 4 pcs. Type : Fiat Brava, Bravo and Lancia Ypsilon from `95 - 1,4l 12V petrol Model FH 8 pcs. Type : Fiat Brava, Bravo, Marea + We, Scudo, Ducato Ulysse with 1,9l D/DT Peugeot engine from `96Model FG 4 pcs. Model FH 8 pcs.

A 12

p/n 430 23 40 p/n 430 23 75

Universal locking and rigging tool kit for petrol engines with double cam shaft This tool kit offers the advantage to the mechanic of fixing the timing adjustment on petrol engines with double camshaft on several vehicle models. The universal set is suitable for Ford, Honda, Rover, Land Rover, Volkswagen, Seat, Skoda, Audi, Renault, Citroen, Peugeot, Fiat, Vauxhall and Opel models. During all work where the timing belt must be removed it is possible with this locking tool set to lock either with rigging pins the pulleys or with blocking devices the cam shafts and crankshafts so that the gear rim on the flywheel is fixed in the marked position. Universal locking and rigging tool kit 19 pcs.

p/n 930 23 00

Dial gauge stand Fiat To adjusting the crankshaft to the TDC. The stand is used in the place of the spark plug. Dial gauge stand I Follower Ă&#x2DC; 2 mm, M 14 x 1,25, total length 260mm Type : Fiat/Alfa 1,6l 16V, 2,4l 20V Dial gauge stand II Follower Ă&#x2DC; 5 mm, M 14 x 1,25, total length 260mm Type : Fiat 1,8l 16V, 2,0l 20V Dial gauge stand I Fiat without dial gauge Dial gauge stand II Fiat without dial gauge

p/n 430 21 10 p/n 430 21 20

Crankshaft / flywheel locking tool model F Model F1 locking tool flywheel Type : Fiat 1.4 12V, Brava/Bravo 95-98, Lancia Ypsilon 96-99 Model F2 locking tool crankshaft pulley Type : 1, 7D / TD/ (KaVEGR) Punto 96-97, 1,9D/TD Tipo/'Tempra/Ducato Model F3 locking tool crankshaft Type : 1,8 16V Stilo 01-02, 1,9D/DT/JDT 96-02, Brava/Bravo /Punto/Stilo/Marea& We, Multipla, 2.4 DT/JTD (96-), Marea& We, Doblo 1,9D 00-02 Model F1 locking tool flywheel Model F2 locking tool crankshaft pulley Model F3 locking tool crankshaft TDC

p/n 430 21 55 p/n 430 21 60 p/n 430 21 65

Camshaft locking equipment model 147 For adjusting the cam shaft the blocking tools are attached in place of the cam shaft bearing brackets. The tool supports are marked L1 and L2. Type: Alfa 147 1,6l 16V Camshaft locking equipment model 147; 2 pcs. p/n 430 22 150

A 13

Camshaft locking equipment model F8 The locking tools are mounted in place of the cam shaft bearing brackets. Type:

Lancia Kappa 2.0 / 2.4 20 V

Camshaft locking equipment model F8

p/n 430 22 45

Camshaft locking equipment model F The locking tools are mounted in place of the cam shaft bearing brackets. Model F1 Alfa 145/146 1.4 & 1.6 Twin Spark (96-), 155/156 1.6 Twin Spark (96-) Model F2 Alfa 145/146 1.8 & 2.0 Twin Spark (96-), 155/156, Spider/GTV 1.8 & 2.0 Twin Spark (96-), Spider/GTV 2.0 16V (95-) Model F3 Alfa 156 2.5 V6 (97-) Model F4 Fiat Brava, Bravo 1.4 12V (95-), Lancia Ypsilon 1.4 12V (96-99) Model F5 Fiat Brava, Bravo, Marea, Marea Weekend 1.8 16V (95-) Model F6 Fiat Barchetta, Coupe 1.8 16V (96-) Model F7 Fiat Bravo, Marea, Marea Weekend, Coupe 2.0 20V & Turbo (94-) Model F1 2 pcs. Model F2 2 pcs. Model F3 4 pcs. Model F4 1 pcs. Model F5 2 pcs. Model F6 2 pcs. Model F7 2 pcs.

p/n 430 22 10 p/n 430 22 20 p/n 430 22 30 p/n 430 22 40 p/n 430 22 60 p/n 430 22 65 p/n 430 22 70

Camshaft locking equipment model F Model F8 Fiat 1,6 18V Bravo/Brava/Stilo 95-02, 1,8 16V Palio 97-02, Model F9 Fiat -1.7 D/TD Punto (96-) Model F10 Fiat -1.9 D Tipo, Tempra, Ducato (87-) Model F11 Fiat -1.9 TD Tipo, Tempra, Ducato (87-) Model F8 2 pcs. Model F9 Model F10 Model F11

p/n 430 22 50 p/n 430 22 80 p/n 430 22 83 p/n 430 22 86

Crankshaft peg out bolt model FO For adjusting the crankshaft to TDC, e.g. during the timing belt change. The peg out bolt is put in place of the crankshaft sensor into the crank case and locks the crankshaft Type :

Ford engines 1,8 L D / TD Escort, Fiesta, Orion from `95, Mondeo `93

Crankshaft peg out bolt model FO

A 14

p/n 430 19 20

Timing tool set model F1 For locking and adjusting of the camshaft during work on timing. Type: Ford Fiesta, Puma, Escort/Orion, Focus, Sierra, Mondeo, Cougar, Courier/Kombi and Mazda 121, engines 1,25 till 2,0l-16V Zetec und 1,8l D/TD/TDCi Camshaft gauge DOHC engines p/n 430 11 90 Locking pin for TDC p/n 430 18 00 Adjusting pin for TDC Ford, Zetec-Se 1.25l p/n 430 19 15 Adjusting pin for TDC II long (M10 x Ø 8 x 79) p/n 430 19 16 Locking pin for camshaft / CAV injection pump (Ø 6 x 65) 2 pcs. p/n 430 19 17 Locking pin Bosch injection pump (Ø 9,5 x 65) p/n 430 19 18 Flywheel locking device (starter end) p/n 608 90 00 Camshaft and pump pulley puller p/n 430 65 30 Timing tool set model F1 p/n 430 72 00

Vibration damper disassembly/assembly tool F/M For work on toothed timing belt change. Type: Ford Fiesta 1.25, 1.4, 1.6l -16V Zetec, Puma 1.4, 1.6, 1.7l -16V, Mazda 121 1.25l - 16V Vibration damper disassembly/assembly tool F/M p/n 430 73 00

Timing tool set model R1 For locking and adjusting of the camshaft during work on the timing e.g. changing of the timing belt. Type : Renault Twingo, Clio, Kangoo, Megane/Scenic, Laguna, Espace, Trafic, Express, Extra, Rapid u. R19 engines 1.2-, 1.4-, 1.6-, 1.8-; 2.0 -16V + 1.9-D/TD/DTI Camshaft gauge Crankshaft locking pin I Crankshaft locking pin II Timing tool set model R1 in a case

p/n 430 70 01 p/n 430 70 02 p/n 430 70 03 p/n 430 70 00

Timing tool set model RON For locking and adjusting of the camshaft and the crankshaft during timing belt change. Type: Renault Clio, Megane, Scenic, Laguna, Espace, Kangoo, Trafic und Master, Opel Vivaro und Movano `99 -`04, Nissan Micra, Kubistar, Primastar und Interstar with K9K (1,5l cDi), F9Q (1,9l cDi), G9T (2,2l cDi), G9U (2,5l cDi) engines Timing tool set model RON 9 pcs.

p/n 603 88 70

A 15

Timing tool set R/V For locking and adjusting the camshaft and the crankshaft during work on timing: Type: Renault Laguna, Safrane, Volvo 850, S-, V-70 engines 2,0 â&#x20AC;&#x201C; 16V + 2,5 - 20V engine code N7Q 700/704/710/711 + N7U 700/701, B5254, B5234 und B5204 Camshaft gauge R/V Crankshaft locking pin R/V V-belt â&#x20AC;&#x201C;tensioner pulley spanner R/V Timing tool set R/V

p/n p/n p/n p/n

430 71 01 430 71 02 430 71 03 430 71 00

Timing and locking tool sets For adjusting the engine timing along with various locking tools for crankshafts, camshafts and starter rings The sets are designed for engines manufactured by Ford, Renault, VAG and PSA, also used in other model types such as Opel, Nissan, VW PD, Audi, Seat, Skoda, Citroen, Peugeot etc.

A 16

Timing adjust and locking tool set for Ford

p/n 930 23 10

Timing adjust and locking tool set for Renault

p/n 930 23 20

Timing adjust and locking tool set for VAG

p/n 930 23 30

Timing adjust and locking tool set for PSA

p/n 930 24 00

Valve spring disassembly / assembly set For the fast disassembly and assembly of valve stem seals Compressed air adapter with compressed air quick coupler, length 150 mm for thread; M 14x1,25, M10x1, M12x1,25 p/n 609 62 40 Compressed air adapter with compressed air quick coupler, length 220 mm e.g.: MB, VW, Ford f. thread M 14x1,25, M10x1, M12x1,25 p/n 609 62 50 Valve spring disassembly / assembly set 7 pcs p/n 902 35 00 Valve spring disassembly / assembly set passenger car 16 V 3 pcs p/n 902 10 00 Valve spring disassembly / assembly set motorbikes 3 pcs p/n 902 13 00

Valve spring compressor set universal This universal valve spring compressor set is ideal for workshops that repair vehicles of several different marks. The set contains 5 driving adaptors: 30mm, 25mm, 23mm, 19mm and 16mm Valve spring compressor set 7 pcs.

p/n 902 36 00

Valve assembly set model U For the disassembly/assembly of valves. Because of the compressed air adapter it is also possible to work with the cylinder head in place. The assembly bracket has 7 retaining positions and a universally applicable lever to allow the versatile employment of the tool. Contents: 2 x assembly bracket 1 x axel 515 mm 1 x assembly lever 1 x disassembly / assembly compression piece Ă&#x2DC; 22mm 1 x assembly aid 1 x Compressed air adapter flexible.. M14/18 350 mm 1 x Compressed air adapter inflexible M14/18 115 mm 1 x Compressed air adapter diesel injectors M24 x 2 4 x quick coupler connector 1 x assembly set (screws, washers and pins) Valve assembly set model U

p/n 600 90 00

A 17

Compressed air adapter flexible To hold the valves closed, as the combustion chamber is pressurised with compressed air. The adapters are screwed in place of the spark plugs or glow plugs. Use e.g. with valve stem repairs or with the pressure loss tester. Model 1 - 4 with flexible reinforced hose Model 1 type : universal (spark plug) Model 2 type : Ford DOHC (spark plug) Model 3 type : Opel Isuzu diesel engine 1,7TD / 1,5D (glow plug) Model 4 type : universal (glow plug) Model 5 type : universal Compressed air adapter flexible model 1 M14 x 1,25 x 250 mm p/n 609 63 50 Compressed air adapter flexible model 2 M14 x 1,25 x 250 mm p/n 609 63 55 Compressed air adapter flexible model 3 M10 x 1,25 x 250 mm p/n 609 63 60 Compressed air adapter flexible model 4 M12 x 1,25 x 250 mm p/n 609 63 65 Compressed air adapter inflexible model 5 M14 x 1,25 x 220 mm p/n 609 62 50 (diesel adapter see compression writers)

Reaction wrench model U3 with a reference circle of 45 mm to 350 mm Universal reaction wrench for holding e.g. transmission and differential flanges, crankshaft and camshaft pulleys With replaceable, hardened screwed ends Handhold 400 mm Lg. p/n 608 46 71 Applicator for reaction wrench without screwed ends p/n 608 80 81 Screwed ends with groove Ø 10 u. 12 mm 2 pcs.* p/n 608 80 82 Screwed ends with groove Ø 8 u. 14 mm 2 pcs.* p/n 608 80 83 Screwed ends with groove Ø 7 u. 9 mm 2 pcs.* p/n 608 80 84 Reaction wrench model U3 p/n 608 80 80 3 pair screwed ends with groove p/n 608 80 85 in a plastic case

A 18

Face milling device crankshaft model 3 For repairing (re-milling) the damaged fitting surface of the crankshaft face. For correct seating of the new timing belt pulley it is necessary to rework the damaged fitting surface of the crankshaft in order to prevent further loosening. A centring pin is placed in the crankshaft in order to get an accurate angle and flat surface Type : Audi, VW, Ford, Seat, Skoda 1,9 L diesel engines 5 cyl. engines (e.c.: e.g. ACV, AHY) Contents: Face cutter model 2 35 mm Centrering bolt size 1 M14 x 1,5 x 73 mm Centrering bolt size 2 M18 x 1,5x 88 mm Special spanner Cleaning brush Face milling device crankshaft model 3 in a plastic case

p/n 608 88 91 p/n 608 88 82 p/n 608 88 92 p/n 608 88 83 p/n 608 88 84 p/n 608 88 70

Supplements Centrering bolt size 3 4 cyl. engines with crankshaft thread M16 x 1,5 Type : Audi/VW 4 cylinder engine code AGR Centrering bolt size 4 Long centring bolt for engines with a deep crankshaft thread. Type : VW 5 cylinder ACV from engine nr. 048 995 >> and AAB from engine nr. 424 606 >> Centrering pin size 3 M16 x 1,5 x 73 mm Centrering pin size 4 M18 x 1,5 x 131 mm

p/n 608 88 87 p/n 608 88 93

Cylinder head socket inserts Ribe 1/2" ďż˝-drive

Model 1R Ribe 12 x 120 mm Type: Fiat with petrol engines Model 2R Ribe 13 x 120 mm Type: Fiat Bravo, Brava, Alfa, Lancia Kappa Model 3R Ribe 14 x 100 mm Type: e.g. Fiat Thema, - Ducato, Lancia Dedra, Tipo, Tempra, 3 diesel engines 1930 + 2500 cm Model 4R Ribe 9 x 100 mm Type: e.g. Fiat 1,4l 16V Cylinder head socket insert model 1R Cylinder head socket insert model 2R Cylinder head socket insert model 3R Cylinder head socket insert model 4R

p/n 792 21 20 p/n 606 22 80 p/n 792 21 40 p/n 792 21 09

A 19

Cylinder head socket insert Torx 55

T-profile socket insert T 55 x 140 x 1/2" �-drive Type : Ford OHC und DOHC Renault engine code : G8T + all from ´95 Opel 6- cyl. series MB engines 112,113 T-profile socket insert T 55

p/n 788 55 50

Cylinder head socket E 20 -NFZ E-profile E 20 x 132 mm x 1/2" �-drive

Type : MAN F2000, F90, F8 and busses with the engines D25 / D28 Cylinder head socket E 20

p/n 606 14 20

Cylinder head socket 3/4“ Impact commercial vehicles 3/4“ �-drive, without chamfer For the disassembly and assembly of cylinder head screws on commercial vehicles. Type : MB, MAN e.g. SW 17 MB / MAN SW 19 MB Actros E 18 MAN model M 2000, busses with engine D08 E 20 MAN model F 2000, F90, F8, busses with engine D25 / D28 Cylinder head socket 17 12 sided x 110 Cylinder head socket 19 12 sided x 110

p/n 606 28 17 p/n 606 28 19

Cylinder head socket Cylinder head socket Cylinder head socket Cylinder head socket

p/n 606 28 18 p/n 606 28 20 p/n 606 28 22 p/n 606 28 24

E 18 x 110 E 20 x 110 E 22 x 110 E 24 x 110

Piston ring compressor Pistons 75 - 125 mm Ø Bandwidth 38 mm With profiled band Low friction between the band and piston ring, The band can not slip into the cylinder. One time adjustment for several piston rings of the same diameter. Piston ring compressor

A 20

p/n 607 30 00

Piston ring compressor A ratchet with release lever ensures the fast compression of the piston rings. The band is made of sprung steel. Ratchet

For pistons Ø

Bandwidth

P/n

without with with with

40 - 75 54 – 125 90 - 175 90 - 175

44 mm 89 mm 89 mm 165 mm

607 20 50 607 20 00 607 21 00 607 21 50

Cylinder hone brushes These hone brushes are auto centring and produce a finely polished surface for a long life span. All brushes have a range of tolerance of +/-2 mm the diameters are graduated in the sizes below. Hone brush SIC grain 240 outside Ø 10,0mm Hone brush SIC grain 240 outside Ø 15,0mm Hone brush SIC grain 240 outside Ø 20,0mm Hone brush SIC grain 240 outside Ø 25,0mm Hone brush SIC grain 240 outside Ø 30,0mm Hone brush SIC grain 240 outside Ø 35,0mm Hone brush SIC grain 240 outside Ø 40,0mm Hone brush SIC grain 240 outside Ø 45,0mm Hone brush SIC grain 240 outside Ø 50,0mm Hone brush SIC grain 240 outside Ø 55,0mm Hone brush SIC grain 240 outside Ø 60,0mm

p/n 913 60 10 p/n 913 60 15 p/n 913 60 20 p/n 913 60 25 p/n 913 60 30 p/n 913 60 35 p/n 913 60 40 p/n 913 60 45 p/n 913 60 50 p/n 913 60 55 p/n 913 60 60

Cylinder hone tool 1/4" flexible drive shaft for drills with speeds of 1500 to 2500 rpm. Self spreading hone arms, contact pressure is adjustable. Model

Cyl-Ø mm

A B C D

15- 45 22- 50 50-135 50-175

Hone arms mm 2 3 3 3

Stone length mm 28 28 75 100

Total length mm 20 205 270 300

p/n 613 60 00 613 61 00 613 62 00 613 63 00

Replacement segments (set) : For tool A A B B C C C D D D

Stone length mm 28 28 28 28 75 75 75 100 100 100

Standard

Fine

Crude

p/n

x x x x -

x x

613 60 10 613 60 20 613 61 10 613 61 20 613 62 10 613 62 20 613 62 30 613 63 10 613 63 20 613 63 30

A 21

Neway valve seat cutter set Universal set passenger car valve Ø 28-46m 203,212,217,622 with pilots p/n 601 00 50 Nr:

Head- Ø mm

203 212 217 622

31,8 31,6 38 38

Operational range min max mm mm 29 38 29 38 35 44 35 44

Angle° 31°x46° 15°x75° 15°x75° 31°x46°

Repl. blades Type Nr. quantity 250 250/254 251/254 251

3/3 3/3 3/3 5/5

p/n . 601 20 30 601 21 20 601 21 70 601 62 20

Universal set trucks 203,212,217,622,642,643,652, 653,672,674 with pilots p/n 601 01 30 Nr:

Head- Ø mm

203 212 217 622 642 643 652 653 672 674

31,8 31,6 38 38 44,5 44,5 50,8 50,8 63,5 63,5

Operational range min max mm mm 29 38 29 38 35 44 35 44 42 50 42 50 48 57 48 57 61 70 61 70

Angle° 31°x46° 15°x75° 15°x75° 31°x46° 31°x46° 15°x60° 31°x46° 15°x60° 31°x46° 15°x60°

Repl. blades Type Nr. quantity 250 250/254 251/254 251 251 251/254 251 251/254 251 251/254

3/3 3/3 3/3 5/5 5/5 5/5 5/5 5/5 7/7 5/5

p/n . 601 20 30 601 21 20 601 21 70 601 62 20 601 64 20 601 64 30 601 65 20 601 65 30 601 67 20 601 67 40

Universal set passenger car 16V - diameter 28,6 mm 68,269,278 / 3 pilots p/n 601 04 50 Nr:

Head- Ø mm

268 269 278

28,6 28,6 28,6

Operational range min max mm mm 26 35 26 35 26 35

Angle° 45° 60° 30°

Repl. blades Type Nr. quantity 250 252 250

3 3 3

p/n . 601 26 80 601 26 90 601 27 80

Universal set VW valves, diameter 28-46mm 206,229,230,234 p/n 601 05 22 Nr:

Head- Ø mm

206 229 230 234

31,8 31,8 31,8 38

Operational range min max mm mm 29 38 29 38 29 38 35 44

Angle° 75° 15°x45° 30°x45° 30°x45°

Repl. blades Type Nr. quantity 254 250 250 251

3 3/3 3/3 3/3

p/n . 601 20 60 601 22 90 601 23 00 601 23 40

Valve seat milling set Mercedes Benz passenger cars 203, 212, 217, 622, 697 p/n 601 05 30 Nr:

Head- Ø mm

203 212 217 622 697

31,8 31,6 38 38 44,5

Operational range min max mm mm 29 38 29 38 35 44 35 44 42 51

Angle° 31°x46° 15°x75° 15°x75° 31°x46° 15°x75°

Repl. blades Type Nr. quantity 250 250/254 251/254 251 251/254

3/3 3/3 3/3 5/5 5/5

p/n . 601 20 30 601 21 20 601 21 70 601 62 20 601 69 70

Valve seat milling set 121,122 for Opel Corsa with engine x10XE and X12XE p/n 601 05 40

A 22

Nr:

Head- Ø mm

121 122

25,4 24,8

Operational range min max mm mm 22 31 22 31

Angle° 15° 45°

Repl. blades Type Nr. quantity 253 253

3 3

p/n . 601 12 10 601 12 20

Valve seat cutters set, valve diameter 12-38mm 130,131,133,212,602 2-Rad p/n 601 05 65 Operational range HeadReplacement blades Nr: Angle° P/n . min max Ø mm Type Nr. quantity mm mm 601 13 00 130 20,7 19 15° glued 3 601 13 10 131 21,6 20 45° glued 3 601 13 30 133 22,2 28 60° glued 3 601 21 20 212 31,6 29 38 15°x75° 250/254 3/3 601 60 20 602 31,8 29 38 31° 250 5

Universal set passenger car valves, diameter 28-46mm 204,206,216,621 p/n 601 05 70 Nr:

HeadØ mm

204 206 216 621

31,8 31,8 38 38

Operational range min max mm mm 29 38 29 38 35 44 35 44

Angle° 15°x46° 75° 75° 15°x46°

Replacement blades Type Nr. quantity 250 254 254 251

3/3 3 3 3/5

Universal set passenger car u. 16V 203,212,217,268,269 278,622 Nr:

HeadØ mm

203 212 217 268 269 278 622

31,8 31,6 38 28,6 28,6 28,6 38

Operational range min max mm mm 29 38 29 38 35 44 26 35 26 35 26 35 35 44

P/n . 601 20 40 601 20 60 601 21 60 601 62 10 p/n 601 06 50

Angle°

Replacement blades Type Nr. quantity

31°x46° 15°x75° 15°x75° 45° 60° 30° 31°x46°

250 250/254 251/254 250 252 250 251

3/3 3/3 3/3 3 3 3 5/5

P/n . 601 20 30 601 21 20 601 21 70 601 26 80 601 26 90 601 27 80 601 62 20

Neway accessories / spare parts Description: Tungsten carbide blade nr. 250 - 9,5 mm Tungsten carbide blade nr. 251 - 12,7 mm Tungsten carbide blade nr. 252 - 12,7 mm Tungsten carbide blade nr. 253 - 7,9 mm Tungsten carbide blade nr. 254 - 19 mm Tungsten carbide blade for HVR Rotary handle for valve seat cutter S 100 Rotary handle for valve seat cutter S 200/600 Rotary handle with crank lever for valve seat cutter S200/600 Adapter for rotary handle 200/100 Allen key 5/64" for Neway valve seat cutters Allen key 3/32 for stud screw HK332 Allen key 9/64" for Neway Pilot puller pin for Neway guiding spike Allen key 5,5 + 6 mm Stud screw 5-40 Stud screw 6 x 4 mm Allen key with grip for stud screw Nr. 564 Wedge for valve seat cutters till 25 mm Wedge for valve seat cutters from 25 mm Neway cleaning brush Valve guide cleaning tool Neway GIZMATIC valve cone milling tool for 30°and 45 with feed adapter universal

P/n 601 95 00 601 95 10 601 95 20 601 95 30 601 95 40 601 95 50 601 96 00 601 96 10 601 96 15 601 96 20 601 97 00 601 97 10 601 97 15 601 97 20 601 97 30 601 97 40 601 97 50 601 97 60 601 98 00 601 98 10 601 99 00 601 99 50 601 40 00

A 23

Neway pilots Serie 100

120

150

200

Nr. 9/32 starr 5 starr 5,5 starr 6 starr 6,5 starr 8 starr 5,5 6 6,5 7 7,5 8 8,5 6 6,5 7 7,5 8 8,5 9 9.5 10 10,5 11 11.5 12 12.5 3/8 " 5/16" 13/32" 1/2" 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13

clamping range mm

for cutters

130 - 143

5,4-5,9 5,9 – 6,4 6,4 – 6,9 6,9 – 7,4 7,4 – 7,9 7,9 – 8,4 8,4 – 8,9 5,9- 6.4 6,4- 6.9 6,9- 7.4 7,4- 7.9 7,9- 8,4 8,4- 8.9 8.9- 9,4 9.4- 9.9 9.9-10,4 10.4-109 10,9-11,4 11.4-11.9 11.9-12,4 12.4-12,9 9,4-9,9 7,9-8,4 10,2-10,7 12,6-13,1 7.9- 8,4 8.4- 8,9 8.9- 9,4 9,4- 9,9 9,9-10,4 10.4-109 10,9-11,4 11.4-11.9 11,9-12,4 12,4-12.9 12,9-13,4

100

200/600

Description

A 24

Length mm 114 114 114 114 133 114 133 133 133 159 159 159 165 152 152 159 159 165 165 178 178 178 178 178 178 178 178 197 197 203 203 197 197 197 197 203 203 203 203 203 203 203

P/n 601 71 02 601 71 11 601 71 14 601 71 25 601 71 30 601 71 44 601 71 90 601 72 00 601 72 10 601 72 20 601 72 30 601 72 40 601 72 50 601 85 00 601 85 10 601 85 20 601 85 30 601 85 40 601 85 50 601 85 60 601 85 70 601 85 80 601 85 90 601 86 00 601 86 10 601 86 20 601 86 30 601 91 50 601 91 60 601 91 70 601 91 90 601 92 00 601 92 10 601 92 20 601 92 30 601 92 40 601 92 50 601 92 60 601 92 70 601 92 80 601 92 90 601 93 00

P/n

Neway guiding spike 16-V engines 140/5 starr

601 83 72

Neway guiding spike 16-V engines 140/5,5 starr

601 83 74

Neway guiding spike 16-V engines 140/6 starr

601 83 76

Neway guiding spike 16-V engines 140/6.6 starr

601 83 78

Neway guiding spike 16-V engines 140/7 starr

601 83 80

Neway guiding spike 16-V engines 140/5.52 starr

601 84 56

Neway guiding spike 16-V engines 140/6.5 starr

601 84 66

Neway guiding spike 16-V engines 140/6.98 starr

601 84 69

Neway guiding spike 16-V engines 140/7.02 starr

601 84 72

Neway guiding spike 16-V engines 140/7.5 starr

601 84 75

Neway guiding spike 16-V engines 140/8 starr

601 84 80

Neway guiding spike 16-V engines 140/8.02 starr

601 84 82

Neway guiding spike 16-V engines 140/8.5 starr

601 84 85

Neway guiding spike 16-V engines 140/9 starr

601 84 90

Neway guiding spike 16-V engines 140/9.5 starr

601 84 95

Neway valve seat cutters Nr:

HeadØ mm

102 103 110 111 114 115 119 121 122 123 124 125 126 127 128 130 131 132 133 134 135 142 143 201 203 204 205 206 209 211 212 213 216 217 219 220 221 222 229 230 232 234 237 239 243 244 268 269 270 271 272 273 274 275 278 279 285 286 288 292 293 297 299 602 603 604 605 606

33,3 28,6 24,8 25,4 31,8 24,8 25,4 25,4 24,8 24,8 33,3 25,4 25,4 24,8 31,8 20,7 21,6 21,1 22,2 19,4 21,1 23,5 23,5 35 31,8 31,8 38 31,8 35 31,6 31,6 38 38 38 38 31,8 35 31,8 31,8 31,8 35 38 41,3 38 28,6 31,8 28,6 28,6 31,8 38 44,5 31,8 28,6 38 28,6 28,6 31,8 35 50,8 44,5 44,5 38 28,6 31,8 31,8 31,8 31,8 31,8

Operational range min max. mm mm

30 26 22 22 29 22 22 22 22 22 30 22 22 22 29

32 29 29 35 29 32 29 29 35 35 35 35 29 32 29 29 29 35 35 38 35 26 29 26 26 29 32 42 29 26 32 26 26 29 32 48 42 42 35 26 29 29 29 29 29

39 35 31 32 38 31 32 32 32 32 39 31 31 31 38 18 19 19 19 16 19 22 22 41 38 38 44 38 41 38 38 44 44 44 44 38 41 38 38 38 41 44 47 44 35 38 35 35 35 44 51 38 35 44 35 35 38 41 57 51 51 44 35 38 38 38 38 38

Angle°

31°x46° 31°x46° 46° 60° 60° 31° 15° 15° 45° 31° 15°x60° 75° 30° 20° 30°x45° 15° 45° 32° 60° 15° 45° 32° 45° 31°x46° 31°x46 15°x46° 60° 75° 15°x46° 60°x75° 15°x75° 15°x60° 75° 15°x75° 65° 20°x45° 20°x45° 70° 15°x45° 30°x45° 30°x45° 30°x45° 30°x45° 11°x45° 15° 15° 45° 60° 60° 70° 75° 15°x60° 30°x45° 46° 30° 75° 46° 11°x45° 15°x60° 15°x60° 60° 15°x70° 30° 31° 15°x31° 15° 65° 25°

Repl. blades Type Nr. quantity

250 253 253 252 252 250 355 253 253 253 251/254 254 250 253 250 geklebt geklebt geklebt geklebt geklebt geklebt geklebt geklebt 250/251 250 250 254 254 250 252/254 250/254 251/254 254 251/254 254 250 250/251 252 250 250 250/251 251 251 251 250 259 250 252 251 254 254 250/252 250 251 250 254 250 250 251/254 251/254 254 251/254 253 250 250 250 254 250

3/3 3/3 3 3 3 3 3 3 3 3 3/3 3 3 3 3/3 3 3 3 3 3 3 3 3 3/3 3/3 3/3 3 3 3/3 3/3 3/3 3/3 3 3/3 3 3/3 3/3 3 3/3 3/3 3/3 3/3 3/3 3/3 3 3 3 3 3 3 3 3/3 3/3 3 3 3 3 3/3 3/3 3/3 3 3/3 3 5 3/5 5 3 5

P/n

Nr:

HeadØ mm

6011020 6011030 6011100 6011110 6011140 6011150 6011190 6011210 6011220 6011230 6011240 6011250 6011260 6011270 6011280 6011300 6011310 6011320 6011330 6011340 6011350 6011420 6011430 6012010 6012030 6012040 6012050 6012060 6012090 6012110 6012120 6012130 6012160 6012170 6012190 6012200 6012210 6012220 6012290 6012300 6012320 6012340 6012370 6012390 6012430 6012440 6012680 6012690 6012700 6012710 6012720 6012730 6012740 6012750 6012780 6012790 6012850 6012860 6012880 6012920 6012930 6012970 6012990 6016020 6016030 6016040 6016050 6016060

607 608 609 611 612 613 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 631 632 633 634 635 636 641 642 643 644 645 646 647 649 652 653 654 657 659 660 662 664 665 666 672 674 675 676 677 680 681 683 684 685 686 689 690 691 692 695 696 697 698 699 701 740

31,8 31,8 31,8 35 35 35 35 35 35 35 38 38 38 38 38 38 38 38 38 38 38 41,3 41,3 41,3 41,3 41,3 41,3 44,5 44,5 44,5 44,5 44,5 44,5 44,5 44,5 50,8 50,8 50,8 50,8 50,8 50,8 57,2 57,2 57,2 57,2 63,5 63,5 63,5 63,5 63,5 50,8 50,8 50,8 50,8 55,6 50,8 38 38 38 38 44,5 44,5 44,5 44,5 44,5 31,8 44,5

Operational range min max. mm mm

29 29 29 32 32 32 32 32 32 32 35 35 35 35 35 35 35 35 35 35 35 28 28 328 28 28 28 42 42 42 42 42 42 42 42 48 48 48 48 48 48 54 54 54 54 61 61 61 61 61 48 48 48 48 53 48 35 35 35 35 42 42 42 42 42 29 42

38 38 38 41 41 41 41 41 41 41 44 44 44 44 44 44 44 44 44 44 44 47 47 47 47 47 47 50 50 50 50 50 50 50 50 57 57 57 57 57 57 63 63 63 63 70 70 70 70 70 57 57 57 57 62 57 44 44 44 44 51 51 51 51 51 38 51

Angle°

30° 45° 46° 31° 15°x46° 20°x46° 15°x45° 30°x45° 0°x46° 35°x60° 15°x60° 45° 15°x46° 31°x46° 15°x30° 15°x75° 15°x45° 30°x45° 30° 31° 15° 15°x46° 31°x46° 20°x45° 45° 15°x45° 30°x45° 15°x46° 31°x46° 15°x60° 60° 30°x45° 15°x45° 30° 31° 31°x46 15°x60° 15°x75° 50° 15°x45° 30°x45° 31°x46° 15°x46° 30°x45° 15°x60° 31°x46° 15°x60° 60° 15° 30°x45° 30° 20° 36° 70° 20° 15° 25° 35° 43x52° 36° 35° 25° 15°x75° 37-1/2° 70° 0° 0°

Repl. blades Type Nr. quantity

250 250 250 250 250 251/250 250 251 250 250/252 251/254 251 251 251 250 251/254 251 251 250 251 250 251 251 251 251 251 251 251 251 251/254 254 251 252 250 251 251 251/254 251/254 254 251 251 251 251 251 251/254 251 251/254 254 251 251 251 250 251 254 251 251 251 251 251 251 251 251 251/254 251 254 250 251

5 5 5 5 3/5 3/5 3/5 5/5 3/5 5/5 5/5 5 3/5 5/5 3/5 5/5 3/5 5/5 5 5 5 3/5 5/5 5/5 5 5/5 5/5 3/5 5/5 5/5 5 5/5 3/5 5 5 5/5 5/5 5/5 5 3/5 5/5 7/7 5/9 7/ 5/5 7/7 5/5 5 5 7/7 5 5 5 5 5 5 5 5 5/5 5 5 5 5/5 5 5 3 3

P/n

6016070 6016080 6016090 6016110 6016120 6016130 6016150 6016160 6016170 6016180 6016190 6016200 6016210 6016220 6016230 6016240 6016250 6016260 6016270 6016280 6016290 6016310 6016320 6016330 6016340 6016350 6016360 6016410 6016420 6016430 6016440 6016450 6016460 6016470 6016490 6016520 6016530 6016540 6016570 6016590 6016600 6016620 6016640 6016650 6016660 6016720 6016740 6016750 6016760 6016770 6016800 6016810 6016830 6016840 6016850 6016860 6016890 6016900 6016910 6016920 6016950 6016960 6016970 6016980 6016990 6017010 6017400

A 25

Valve seat cutters set model NW Type : Opel engines X 10 XE, X 12 XE Contents: Rotary handle for valve seat cutter S 100 Valve seat cutters nr. 122 / 45° Valve seat cutters nr 121 / 15° Pilot 100 - 5,0 mm Allen key 5/64" Cleaning brush Valve seat cutters set model NW In a plastic case

p/n 601 96 00 p/n 601 12 20 p/n 601 12 10 p/n 601 71 11 p/n 601 97 00 p/n 601 99 00 p/n 601 05 40

Valve cone milling tool model 2 The valve cone milling tool with integrated linear feed unit permits a precise, fast and low-priced treatment of valve cones of 30° and 45° It is suitable for valves with a cone Ø of 16 - 54 mm and a stem Ø of 3,8 - 13 mm. Valve stem guiding sleeves are not needed with this model. Valve cone milling tool model 2

p/n 601 40 00

Rotary handle with crank lever Rotary handle with crank lever for cutter S200/600 this rotary handle makes possible an exact, precise operation due to the even contact pressure produced by the spring action. Rotary handle with crank lever

p/n 601 96 50

Separation and rivet tool for motorcycle driving chains Here we offer a tool for the separation and riveting elements in drive chains. Most frequent application is the moped and motorcycle sectors. Separation and rivet tool for motorcycle driving chains p/n 908 40 00

XZN socket inserts

Socket inserts with □-drive ½ “in short 40.0 mm and long 75.0 mm version XZN M14, XZN M16 and XZN M18. These are needed for the disassembly and assembly of the special screw connections in the chassis and the engine support. Made in one piece, these inserts are extremely tough. XZN socket inserts ½“-drive, 6 pcs

A 26

p/n 794 05 00

Tow hitch in vehicle tester 12 Volt LED display with a 5m feed cable For examining the electrical connection at the tow hitch. This is a robust tool designed to save time and money for the workshop. From the driver's seat it is possible to check: Turn signals right/left, brake light right/left, tail lights right/left reversing light, Fog tail light, Fog tail lights disconnection when using a trailer. Also suitable for lamp control systems. Tow hitch in vehicle tester 12 Volt with 13-pin DIN 72570 connecter plug

p/n 861 61 50

Multi tester Universal multi-tester in an impact protected plastic housing. With digital 7 digit LCD and an additional bar line display. Overload safety device with optical and acoustic signal. Automatic shut off after 30 minutes. Basic functions for the rotary switch: Temperature measurement, diode test, passage test, ohm meter, voltage measurement, current measurement, number of revolutions, work cycle, frequency and dwell angle. Through a 9 V battery, the device is independent Includes are: Storage bag, measuring cable, inductive clamp, thermo feeler, 9 V battery. Technical data: Safety fuse: 2 A 600 V and 15 A 600 V Voltage: max. 1000 V Dimensions: 203 x 100 x 47 mm Multi tester

p/n 609 99 00

Universal 13 pcs. set with measurement and test cables High quality tool for the car electrician is an indispensable test cable set for use with testers, test lamps, Multi meters etc. The set can be used for example to test bad mass connections, continuity tests, polarization or for operating electric devices such as starter motors, wiper motors, electric power windows, electric antennas, etc. Measurement and test cable set 13 pcs p/n 951 48 00 Measurement and test cable set 15 pcs with 2 piercing aids. p/n 951 48 05 Piercing aids for circuit tester with special steel points and cable. p/n 951 47 50

B 01

Electronic protection This equipment is designed for the protection of electronic units in motor vehicles against voltage peaks, e.g. during welding, during loading of the battery, or during starting aid. Thus electronic units in the vehicle can be protected, without having to disconnect the battery. The equipment is attached to the battery and automatically identifies voltage, so it can be used with both 12V and 24V systems. Voltage suppression: > 15 V/25 V Electronics protection

p/n 410 60 00

Automatic cable stripper Automatic cable stripper

p/n 604 92 00

Central connector dismounting VW-Sharan, Ford-Galaxy, Seat-Alhambra For the disassembly and assembly of the difficult to access central connectors, which are built into the cross-beam of the door. Triple adjustable groove nut spanner. Suitably for VW Sharan, Ford Galaxy, Seat Alhambra. Central connector groove nut spanner

p/n 607 63 00

Alternator many toothed key 33 teeth For the disassembly and assembly of the free-wheel when changing the alternator or the pulley. With a socket insert which engages the generator arbour, e.g. MT/XZN 10, Fiats / inbus 7, the screw connection problem is solved Model 1 Type :

B 02

Without socket insert p/n 604 82 85 SW 17 6-kant, bore hole 12mm, 30mm long Audi, VW, Fiat, Ford, Porsche, Seat, Skoda

Model 2K Socket insert XZN 10 x 110 mm 1/2" �-drive 22 mm hexagon

p/n 604 82 80

Model 2L Socket insert XZN 10 x 135 mm 1/2" �-drive 22 mm hexagon Type : Audi, VW, MB, Seat, Skoda u. a.

p/n 604 82 83

Model 3K T-profile T 50 x 110 mm 1/2" �-drive 22 mm hexagon

p/n 604 82 95

Model 3L T-profile T 50 x 135 mm 1/2" �-drive 22 mm hexagon Type : Renault, Peugeot

p/n 604 82 93

Identification mark tool

Identification mark spare point(s)

Point thickness ( t ) / mm

Point width ( b ) / mm

19719-05 E 19719-05 19729-05 19729-08 19729-08 E

19719-05 EK 19719-05 K 19729-05 K 19729-08 K 19729-08 EK

0,5 0,5 0,5 0,8 0,8

0,8 0,8 1,5 1,5 1,5

Adjusting dimension ( e ) / mm single point 2,2 3,3 3,3 single point

Connector release 19729-08 Spare points 19729-08K Connector release 19729-08 with spare points

p/n 951 50 60 p/n 951 50 70 p/n 951 50 50

Connector release 19719-05 Spare points 19719-05K Connector release 19719-05 with spare points

p/n 951 51 10 p/n 951 51 20 p/n 951 51 00

Connector release 19729-05 Spare points 19729-05K Connector release 19729-05 with spare points

p/n 951 52 10 p/n 951 52 20 p/n 951 52 00

Connector release 19729-08E Spare point 19729-08EK Connector release 19729-08E with spare point

p/n 951 52 60 p/n 951 52 70 p/n 951 52 50

Connector release 19719-05E Spare point 19719-05EK Connector release 19719-05E with spare point

p/n 951 53 10 p/n 951 53 20 p/n 951 53 00

Connector release set 2 pcs. consists of 19729-08, 19729-08E Spare points 19729-08K, 19729-08EK Connector release set 2 pcs with spare points

p/n 951 50 00 p/n 951 50 10 p/n 951 50 20

Connector release set 4 pcs. for Japanese vehicles consists of 19729-08, 19729-08E, 19719-05, 19719-05E with spare points

p/n 951 60 00

Connector release set 5 pcs. Spare points for connector release set 5 pcs. Connector release set with spare points

p/n 951 55 50 p/n 951 56 00 p/n 951 55 00

B 03

Alternator socket insert and bit set Toolset for stopping the alternator axle and at the same time release or tighten the free-wheel pulley. Alternator socket insert and bit set 12 pcs in plastic case.

p/n 904 83 00

Alternator Socket insert Inbus 7mm and pin wrench Type :Fiat, Lancia, Alfa Alternator socket insert Inbus 7mm and pin wrench p/n 904 82 50

UV detector light flexible 440 mm long For leak detection in air conditioning systems. This is an extra slim "pen lamp" with an ultra bright, broad ray of light and a flexible body, which is adjustable to any possible angle. As a result the difficult to access parts of the air conditioning system can be illuminated e.g. deepl in the engine compartment or under the instrument panel. The system must be filled with UV active liquid. UV eyeglasses make it additionally easy to recognize of leakages UV detector light flexible

p/n 649 52 00

Line link release tie-clip For lines-Ă&#x2DC; 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8 For quick hose clips e.g. on air conditioning systems or fuel pipes Typ :

Universal, z.B. Opel, Ford

Line link release tie-clip set 7 pcs.

p/n 605 04 90

Test devices for starter batteries up to 12,75V SBC LC tester and SBC tester with printer also used for testing the alternator These two highly sensitive battery test devices work in a voltage range of 6,00V to 15,00V and a CCA minimum starter current of 10A and CCA max. starter current of 1500A. The test results can be obtained using 4 guidelines, IEC, SAE, DIN and EN. Test options are: alternator tests, starter impact, short-circuit protection. Using model 9206500 it is possible to then print the results using the devices SBC printer. The battery data must be entered for example 12,75V as well as the test standard e.g. DIN, also the temperature if under or over 0Â°Celsius. After a few seconds the determined condition of the battery is displayed. These battery testers function without external operating battery. Battery load examiner with LCD display

p/n 920 60 00

Battery load examiner with LCD display and printer function p/n 920 65 00

B 04

Adjusting tool for start of fuel delivery Release nut, pin wrench, reduction adapter for adjusting the start of fuel delivery with Bosch & CAV pumps. Using the pin wrench the two-piece pump impeller is rotated. Type: Renault Clio, Laguna, Megane, Scenic, Express /Extra, R19, Kangoo, Opel Movano, Arena; Mitsubishi Carisma from `97, Volvo S40+V40 and engine code F8Q und F9Q Adjusting tool for start of fuel delivery 3-tlg.

p/n 430 18 90

Pressure and negative pressure testing set For leak testing of petrol and diesel fuel systems. Easy to use with connectable adapters that are contained in the case. Manometer from -1 to 9 bar with rubber protection. Specification: • Manometer with pressure and negative pressure display • The examination of the suction face of the fuel pump is possible • Air bubble recognition by Plexiglas / inspection glass function • Adapter particularly to vehicles with plastic quick-couplers Type: Mercedes: A class, B class, C class, CLK, CLS, E class, GL class, ML class Seat: Alhambra, Ibiza, Leon, Toledo 3 Skoda: Octavia, Roomster VW: Caddy, Crafter, Eos, Golf 5, New Beetle, Passat, Phaeton V6, Polo, Touareg, Touran, etc. Pressure and negative pressure testing set

p/n 909 59 55

Negative pressure pump Robust complete metal version Metering range: negative pressure to -30 in Hg, -76 cm Hg or -1 bar Complete in plastic case with accessories: several adapters, a container for examining fluids such as gasoline, brake fluid, water etc.. Negative pressure pump

p/n 609 85 50

Pressure and negative pressure pump Robust complete metal unit can be switched between pressure and negative pressure. Metering range: pressure to 4 bar negative pressure to -1,0 bar Complete in plastic case with accessories: several adapters and containers for examining fluids such as gasoline, brake fluid, water etc. Pressure and negative pressure pump

p/n 609 87 50

B 05

Pressure and negative pressure pump model 2 Robust complete metal unit. Can be switched between pressure and negative pressure.. Metering range:

pressure to 1,5 bar negative pressure to -1,0 bar

Complete in a case with many accessories: several adapters and a container for examining fluids such as gasoline, brake fluid, water etc Pressure and negative pressure pump model 2 p/n 609 08 50

Pressure and negative pressure pump model HV90 Robust complete metal unit. Can be switched between pressure and negative pressure. Metering range:

pressure to 1,5 bar negative pressure to -1,0 bar

Complete in a case with several adapters Pressure and negative pressure pump model HV90 p/n 609 08 00

Turbocharger pressure test unit model C Range -1 to 3 bar, precision manometer 100 mm Ă&#x2DC;, 3 m PVC hose with 3 way splitter For turbocharger compression test while driving. Turbocharger pressure test unit model C

p/n 609 81 00

Exhaust pressure testing device Manometer Ă&#x2DC; 63 mm, -1 till +3 bar, Connecting piece M 18 x 1.5, pressure hose 3 m long By examining the exhaust pressure a fast diagnosis of the catalytic converter is possible. To be mounted in place of the lambda probe. Exhaust pressure testing device

p/n 604 58 50

Combination socket set 7 pcs A socket set for the removal of lambda probes, injectors , sensors and switches. Special sockets with slots or windows in long or special short versions - in the sizes 22 (7/8"), 27 (11/16") and 29mm Combination socket set 7 pcs

B 06

p/n 905 90 00

Fuel extraction station model 2 Electrical extraction apparatus for fuel from passenger car tanks etc. This model is equipped with a high delivery pump with a capacity of 200 L/hr. The barrel takes up 120l of fuel for short term storage. It is then emptied by changing the hoses. Equipment voltage: 12 V automotive battery, 5m cable. suck/pressure hose: 1,5 and 2,5m Security: Overloading protection, TÜV and PTB examined, CE mark Pump for 12 V - connection (model 2) p/n Barrel 120 L with overflow automatic shut-off p/n Barrel car universal p/n Fuel extraction station model 2 comp. 12 V , 3 pcs. p/n Spare part: Fuel filter p/n

806 61 00 806 62 00 806 53 50 806 60 00 806 51 50

Diesel filling device Containers 1.8l, and 6 to 10 bar, Air consumption 180l/min (efficiency 60% /vacuum) Compressed air bleed port 1/4 “, hook, 3 x silicone hose inside Ǿ 4/6/8.5 mm Vacuum device for fast, clean and problem-free bleeding and/or filling of diesel filters and brake assemblies in most motor vehicle types e.g. diesel passenger cars filter changes, run dry tanks, wrong refuelling or for the brake bleeding of motorcycles The venturi nozzle produces a vacuum in the container, then using the extraction hose liquid can be sucked off and/or sucked in. (Compressed air must thereby be permanently attached.) Type: Universal (is suitable for diesel and brake fluid) e.g. Audi/VW PD engines diesel filter change (all 60000Km/ when using biodiesel all 30000 km), MT-CDI-engines, PSA HDI engines, as well as Renault, Fiat direct injection etc. Warning! Do not use for easily inflammable liquids e.g. petrol Diesel filling device

p/n 806 36 500

Accessory: Brake fluid angle adapter

p/n 806 36 502

Fuel pipe release tool model V 210 mm long For the damage-free loosening of the fuel line connectors e.g. between fuel filters and line. For difficult installation positions the pliers head is bent to 90°. Type : Alfa, Audi, VW, Fiat, Lancia and Volvo Fuel pipe release tool model V

p/n 605 04 80

B 07

Fuel pipe release tool model F2 For the loosening of the plug connectors on fuel pipes and fuel level sensors. Type : Ford DOHC Motor Fuel pipe release tool model F2

p/n 605 03 50

Fuel filter tool

1/2" ďż˝ drive For the damage-free disassembly of the fuel filter housing cover screw connection when renewing the filter cartridge Type : PSA Fuel filter tool

p/n 912 08 96

Hose clamp pliers " Clic" To open and close " CLIC" type - Clips. These clips can then be reused. Type: e.g. VW - Audi fuel pipes, Expansion tank water, BMW windshield wiper system among other things Opelâ&#x20AC;&#x2122;s brake booster VW Polo hose clamp pliers " Clic" Hose clamp pliers " Clic"

p/n 605 02 50

Hose clip pliers model F With flexible cable for remote control (530 mm) For use on hose clips on coolant and fuel hoses, cv boots etc. universal applicable, for nearly all passenger car marks. No damage to clip or hose. Allows problem-free, fast removal of coolant hoses. Hose clip pliers model F

p/n 605 03 25

Hose clip pliers model ES for Clic clips A pair of pliers to open and close Clic clips. With this model the inserts are replaceable and twistable in order to reach the most difficult to access clips. Hose clip pliers model ES for Clic clips

B 08

p/n 605 02 70

Hose clamp pliers for MUBEA clips For use on the new hose clips which are used in VW Passat turbocharger suction hoses and in the T5 water hoses with clamps MU56 or MU65. To cover both large and small clips both pliers are required. Hose clamp pliers for MU25,MU26,MU27,MU40 Hose clamp pliers for MU56,MU65

p/n 905 02 93 p/n 905 02 95

Fuel injection system pressure test set model 3 Extensive set for fuel pressure testing of petrol engine fuel injection systems. Precision manometer 0-10bar with fine adjustment Set contents in the case: Manometer Ă&#x2DC; 100 mm, 0-10bar 3 way valve

p/n 609 53 00 p/n 609 52 50

Reinforced hose 260 mm with quick coupler and nut Reinforced hose 260 mm with two nuts

p/n 609 46 50 p/n 609 52 00

21 Connecting adaptors with quick-coupler: 01 Fiat LE-Jetronic p/n 609 45 10 02 Fiat LE-Jetronic, Ford, BMW (just hollow bolt) p/n 609 45 20 03 MB, Golf, BMW, Audi 100 5-cyl. + DPAK 14 p/n 609 45 30 04 Porsche 911, Audi, Peugeot, Renault, Fiat p/n 609 45 40 05 Saab, Renault Audi 5-Zyl.,VW Golf, Fiat p/n 609 45 50 06 BMW p/n 609 45 60 07 Opel-Astra, BMW, Fiat, Alfa-Romeo, Nissan p/n 609 46 70 Mazda, Renault Twingo, Peugeot-806, Citroen Evasion 08 MB p/n 609 46 80 09 Ford, Mitsubishi, Golf 16 V p/n 609 46 90 11 MB p/n 609 47 10 12 Alfa, Peugeot, Volvo, Fiat Croma, Seat VW, Audi p/n 609 47 20 13 Peugeot, Fiat Croma, Audi 6-Zyl. p/n 609 47 30 14 Audi, Porsche 911, 928 924, Audi 100 5cyl. p/n 609 47 40 21 Ford Standard / 2,8i , Golf 16 V p/n 609 48 10 22 Opel-Motronic 1.5, 2.5, 4.1 p/n 609 48 20 26 Ford EFi 2.4 + 2.9 L p/n 609 48 60 28 MB and Opel LMH p/n 609 48 80 29 Ford p/n 609 48 90 30 Ford-Zeta + SEFi, Peugeot HPi 206 / 307 p/n 609 49 00 31 2-tlg. Audi/VW Bosch-Mono-Jetronik ec: RP p/n 609 49 10 32 Opel -Motronic p/n 609 49 20 Fuel injection system pressure test set model 3

p/n 609 59 70

B 09

Pressure test adapter QC One side with quick-coupler, second side with vehicle-specific thread. O = outside thread, I = Inside thread, A = angle adapter Type

p/n.

M 14x1.5(O,A)

American vehicles, Fiat LE-Jetronic

609 45 10

M 12x1.5 (O,A)

American vehicles, Fiat LE-Jetronic, Ford Fiesta, Escort 1.1, BMW (just hollow bolt)

604 45 20

M 8x1 (O)

BMW, MB, VW Golf, Audi 100 5 cyl. + QC 14

609 45 30

Thread

M 12x1.5 (O)

M 12x1.5 (l)

M 8x1 (l)

07 08

609 45 40

609 45 50

BMW

609 45 60

1 x Ø 6mm^ 1 x Ø 8mm

Opel-Astra, BMW, Fiat Uno, Lancia, AlfaRomeo, Nissan, Mazda Renault Espace, Twingo, Peugeot-806, Citroen Evasion

609 46 70

M 10 x 1 (O)

609 46 80

M 10x1 (O,A)

Ford, Mitsubishi, VW Golf 16 V

609 46 90

M 8x1 (O) special adapter

Audi

609 47 00

M 8x1 (l)

609 47 10

Alfa-Romeo, Peugeot, Volvo, Fiat-Croma, Seat (Ibiza, Malaga), VW-Monojetronic, Audi 6 cyl. + QC 13

609 47 20

M 14x1.5 (l)

M 14x1.5 (O)

Peugeot, Fiat-Croma, Audi 6 cyl. + QC 12

609 47 30

M 8x1 (O,A)

Porsche 911, 924, 928 am Warming up automatic controller , Audi 100 5 cyl. + QC 03

609 47 40

M 10x1 (l)

Ford

609 47 50

M 8x1 (l) special adapter

609 47 60 609 47 90

M 16x1.5 (O)

Citroën XM, Ford Scorpio, engine DOH 2.0 L, Opel `97 1.4L

M 16x1.5 (l)

Citroën XM, Ford Scorpio 2.8i

609 48 00

Ford Standard, VW Golf 16 V

609 48 10

21 22 26

M 10 x 1 (l) 7/16"-20UNF V6 (l) 7/16"-20UNF V6 (I)

7/16"-20UNF V6 (l, A) swivelling

VG 8 with release pin (I,A)

30 31 32

B 10

Audi 5-cyl., Peugeot 205, 309, 405, Porsche 911, 928, 924, Renault 9/ 11/18,GTX 11,TXE, Fiat L-Jetronic +QC 05, Fiat Monotronic +QC 07 Audi 5 cyl., VW Golf, Fiat L-Jetronic + QC 04, Porsche 911 3.6l, 944 3.2l, 928 S4, Renault 4, 9, 18, GTX 11, TXE, Saab,

VG 8 with release pin (l) Female hose connector 8 mm 2-tlg M 14x1.5 (l) with closing dome

Opel Kadett 16V, Astra `95-, Corsa B, Vectra B, Omega B, Deawoo like qc 22, but with O-ring, Chrysler, Ford Efi 2.4i + 2,9 i, MB, like qc 22, however swivelling and with O-ring, 8x2.5, MB, L+H Jetronic, LMH Motronic, Opel Ecotec, Porsche

609 48 20 609 48 60 609 48 80

swivelling, with angle, Ford-Mondeo

609 48 90

Ford Mondeo, Volvo 850, Peugeot HPi 206, 307, 406, Opel

609 49 00

Bosch Mono-Jetronic for VW Motor RP

609 49 10

Opel Motronic, VW Golf II

609 49 20

Vacuum box Housing: Shatter-proof plastic Suction volume: approx. 14 litres L/W/H: 300/200/350 mm Weight: 3.3 kg. Drain valve, 2 m suction hose and double cone point For the bleeding and suction of liquids. The box is independently applicable, a manometer and level indicator inform the status of application. Areas of application: Pre-bleed of Diesel fuel injection systems after fuel filter change. Change of e.g. water, coolant or brake fluid, oil (engine oil, transmission oil, etc.) Vacuum box p/n 806 36 00 Adapter suction hose CDi Overall length 1000 mm, coupling for MB fuel filter. For the ventilation of the fuel system over the Diesel filter. Type : MB with CDI engine Adapter suction hose CDi

p/n 806 36 10

Injector pressure test device Precision manometer: Ø 100 mm, grade 1.0 with rubber protective cap Desktop device for the examination of Diesel injection nozzles on opening pressure, spray pattern and leak tightness of the injection nozzle. During the examination the liquid is squirted back into the fluid reservoir (330 cm ³) with spray protection. The pumping lever can be changed for easier pumping to the front position (piston displacement 35 cm ³). The drag pointer stops once the pressure required for the nozzle to open is reached. Thus it is not necessary to observe both the jet of the nozzle and the manometer. One pressure pipe (thread M 12 x 1.5) and 3 connecting adaptor are provided. M 14 x 1.5 universal M 12 x 1,25 VW/Audi TDi M 10 x 1 (with sealing cone) Opel DTL/DTH 1) Injector pressure test device 0 - 400 bar with drag pointer p/n 430 53 40 2) Injector pressure test device 0 - 600 bar with drag pointer p/n 430 53 60

Diesel supply pressure testing set Manometer : -1 till 9 bar, Ø 63 mm Feed line: 2 x 3 m, oil and petrol resistant Adapter R 1/4" inner- and R 1/4" outside thread For a fast and reliable pressure test, also during test run. In one step the opening pressure of the overflow valve the maximum pressure of the fuel pump and bubble-free transfer are examined. The transparent centre section permits an evaluation of the fuel. Moreover the negative suction pressure can be examined. Diesel supply pressure testing set

p/n 609 83 20

B 11

Injection pump locking pin For locking the injection pump, e.g. during timing belt change. Mod. 2 Ă&#x2DC; 15,0 mm Type : VW 5 cyl. 2,4L D Injection pump locking pin model 2

p/n 430 19 30

Glow plugs drilling set M 8x1 Drilling and extracting tool set for broken off CDI glow plugs with thread M 8 x 1. During disassembly of extremely seized glow plugs the drive hexagon can often be sheared off. While still attached to the glow plug body the central contact of the glow plug prevents the drive hexagonal from being removed. Using this tool set in a few steps the central contact is removed, the glow plug thread is drilled and the glow plug body is pulled out of the cylinder head. Type:

MB engine OM 642 ( V6 2,8 l + 3,2 l ) in the C, E, M, R, S class, new Sprinter and Viano.

Glow plugs drilling set M 8x1 p/n 604 16 40 in a case In addition recommended: Thread repair set, supplement to the drilling set M8 x 1 p/n 604 16 85

Glow plugs drilling set M 10 x 1 Drilling and extracting tool set for broken off CDI glow plugs with thread M 10 x 1. During disassembly of extremely seized glow plugs the drive hexagon can often be sheared off. While still attached to the glow plug body the central contact of the glow plug prevents the drive hexagonal from being removed. Using this tool set in a few steps the central contact is removed, the glow plug thread is drilled and the glow plug body is pulled out of the cylinder head. Type : CDi glow plugs M10 x 1 Glow plugs drilling set M 10 x 1 in a case

p/n 604 17 40

Glow plugs drilling set M10x1 Renault G9T & G9U Tool kit designed to drill and extract broken off M10x1-glow plugs from the Renault G9T and G9U engines

Glow plugs drilling set M10x1 Renault G9T & G9U p/n604 18 70 in a case

B 12

Glow plugs drilling set M8x1 Tool kit for drilling and extracting broken off M8x1 glow plugs in Fiat/Opel 1,3l Multijet engines. Glow plugs drilling set M8x1 for Fiat/Opel 1,3l Multijet engines p/n 604 16 60

Glow plug reamer model I M 8 x 1 Type: CDI engines e.g. MB, Opel, Renault Glow plug reamer model I M 8 x 1

p/n 604 16 25

Special thread repair set For glow plug M8 x 1, 7 pcs Special tread repair set for glow plug M8 x1, 7 pcs p/n 604 16 85

Stepped glow plug reamer For cleaning the glow plug shaft and the sealing seat in the cylinder head for MB CDI glow plugs M 10x1 with actuator and guidance. Stepped glow plug reamer for MB CDI glow plugs M 10x1 p/n 604 17 25

Universal glow plug reamer model R For cleaning the glow plug shaft and the sealing seat in the cylinder head for glow plugs with a thread M10x1 and M10x1,25 with actuator. Universal glow plug reamer for glow plugs with a thread M10x1 and M10x1,25 p/n 604 17 15

Glow plug reamer model III for CDI engines For cleaning the glow plug shaft and the sealing seat in the cylinder head for MB CDI glow plugs M 12x1,25 with actuator and guidance Glow plug reamer model III for CDI engines

p/n 604 16 15

Special tap supplement Glow plug tools M10 x 1 assortment 12 pcs Special tap supplement glow plug tools M10 x 1 assortment 12 pcs p/n 604 17 83

B 13

Special thread repair set for glow plug M10 x 1 Special thread repair set for glow plug M10 x 1, 13 pcs. p/n 604 17 85

Set with optional tools to the glow plug drill out toolM10x1 Supplement with optional tools to remove free turning electrode caps, cleaning of the glow plug shaft, sealing the seat in the cylinder head and renewing destroyed threads. Set with optional toolsM10x1

p/n604 18 80

Supplement set uni 3 pcs for glow plugs M10x1 Supplement set uni 3 pcs. for glow plugs M10x1 p/n604 18 85

Glow plug drill out set M12x1,25 Tool kit for drilling and extraction of broken off M12x1,25 glow plugs in MB engines. Glow plug drill out set M12x1,25 Glow plug drill out set M12x1,25 supplement supplement to glow plug drill out set M10 x 1

p/n 604 17 60 p/n 604 17 70

Quick set „G“ For glow plug thread repair M12x1,25 Quick set „G“ For glow plug thread repair M12x1,25 p/n 604 19 05

Thread repair set 10x1 If the M10x1 thread has been damaged in the cylinder head, then this can be renewed with this thread repair set. Thread repair set 7 pcs. for M10x1

B 14

p/n 604 18 90

Glow plugs drilling/extracting tool set model Audi/VW M10x1 With these slim glow plugs frequently the drive hexagon shears off. The central contact of the glow plug is till firmly connected with the glow plug body and prevents the hexagonal from being removed. With this tool in few steps the central contact is removed, the glow plug thread is drilled and the glow plug body is pulled out of the cylinder head. Type: Audi & VW V6 TDI engines with glow plugs M10 x 1 (Except ceramic glow plugs!) Glow plugs drilling/extracting tool set model Audi/VW M10x1 p/n 604 22 000 Suplement set 5 pcs. p/n 604 22 010 with existing sets p/n 604 17 300 / 400

Special puller with 3 jaws and pull nut For pulling stuck glow plugs or remove free turning electrode caps in connection with an impact hammer or the combination sleeve. Special puller with nut and 3 jackets M8/M10/M12 p/n 604 17 97

Impact thread adapter and Impact hammer For pulling stuck glow plugs with an Impact hammer. Impact thread adapter Impact hammer

p/n 604 17 98 p/n 103 02 10

Stud puller To remove from the top broken off central electrodes. Special production with drive. Âź " Stud puller 2,5 mm p/n 113 10 25 Stud puller 3,5 mm p/n 113 10 35 Stud puller 4,0 mm p/n 113 10 40 Stud puller 5,0 mm p/n 113 10 55 Stud puller set 4 pcs. p/n 113 00 04

Thread repair sets M8 and M10 For repairing and/or renewing destroyed threads. With the special drill (3 edged, titanium-nitrate) the destroyed thread is removed and the drilling for the threaded insert is produced. Using the turner the cutting threaded insert is then installed. contents Special drill (3 edged, titanium-nitrated) 10 self cutting threaded bushes threaded bush installer Thread repair set M8 Thread repair set M10

p/n 930 00 80 p/n 930 01 00

B 15

Glow plug socket with universal joint 75 mm long, 3/8"  drive Special long socket for difficult to accessible glow plugs 8 mm p/n 604 71 08 Type: Universal e.g. VW T4 / T5, Opel Z13DT and MB A class. 9 mm p/n 604 71 09 Type: 1,9l CDTI engine in the Opel Vectra C, Signum, Astra H 1,9l JTD engine in the Alfa Romeo 147, 156, GT-, Fiat Stilo 2,4l JTD engine in the Alfa Romeo 166, Lancia Thesis

Glow plug socket 9mm laterally slit This special 9mm socket has a lateral slot to allow it to go around the cable which is fixed to the glow plug so that it will not be damaged Type: Fiat, Alfa, Lancia PSA Glow plug socket 9mm laterally slit

p/n: 904 70 90

Glow plug socket 8 mm with universal joint 8mm 3/8“□ drive 150 mm long This glow plug socket 8mm does not have a magnet, but a retaining ball which holds the glow plug. The joint is approximately in the centre of the socket. Type: VAG, Opel, MB and others. Glow plug socket 8 mm with universal joint

p/n 904 71 08

Glow plug ratchet 12mm x 8mm x 245 mm long Slim, bent ratchet. Particularly developed for hard to reach glow plugs, e.g. behind the injection pump. Glow plug ratchet

p/n 604 82 20

Glow plug socket Short, slim socket with universal joint and retaining spring. Model 1 3/8" �drive, 12mm. Type : BMW, Fiat, MB, Renault, Volvo et al.. Model 2 3/8" �drive, 10mm Type : Audi/VW TDI, Renault G8 T, Honda MB A class (with angled extension 7312020) Model 4 3/8" �drive, SW 10mm L Type : Opel/ MB CDI Model 5 3/8" �drive, SW 12mm L Type : Universal, e.g.. MB 4 valve Glow plug socket model 1 Glow plug socket model 2 Glow plug socket model 4L Glow plug socket model 5L

B 16

p/n 604 71 20 p/n 604 71 10 p/n 604 72 10 p/n 604 72 20

Spark plug socket double joint release pliers 45 6 and 12 mm round, 320 mm long Spark plug socket pliers double jointed for low-lying and hard to access spark plugs. Because of the double joint the pliers need little room to open and seize Type: e.g. MB R classV6 und V8 spark plug socket Spark plug socket double joint release pliers 2 pcs. p/n 604 02 700

Glow plug testing device 11 / 12 V With LED display For testing installed glow plugs with the engine switched off (approx. 15 min.) polarity safe connection to the car battery. Automatic shut off In case of short-circuit, the red LED shines for approx. 2 sec. Glow plug testing device 11 / 12 V

p/n 609 98 00

Glow plug testing device GKP 05 For the examination of glow plugs in diesel engines from year of manufacture 2004. DESCRIPTION: • For 4,4 and 5 V glow plugs • Display by led’s of the condition of the glow plugs good/bad • “Low Battery” display • Automatic shut off • Voltage supply by 9 V compound battery Type: Audi: A2, A3, A4, A6, A8 BMW: 1, 3, 5, and 7 series, X3, X5 Mercedes: A , B , C class, CLK, CLS, E class, GL class, ML class Seat: Alhambra, Ibiza, Leon, Toledo 3 Skoda: Octavia, Roomster VW: Caddy, Crafter, Eos, Golf 5, New Beetle, Passat, Phaeton V6, Polo, Touareg, Touran, etc. Glow plug testing device GKP 05

p/n 909 98 00

Spark plug socket pliers model 3 Grab pipe 35 mm, length 290 mm For taking off and press on of hard to reach spark plug sockets, in particular for rubber spark plug sockets Type : Alfa Romeo, BMW, MB, Opel, Ford Spark plug socket pliers model 3

p/n 604 02 00

Spark plug socket pliers model 6 Special pliers to damage-free taking off and/or press on of spark plug sockets. Spark plug socket pliers model 6

p/n 604 01 00

B 17

Spark plug torque wrench model ZK

3/8" � drive For controlled fastening of spark plugs with cone sealing seat. Fixed adjusted torque of 25 Nm. Unscrewing by switching as with conventional ratchet. Spark plug torque wrench model ZK

p/n 406 10 00

Spark plug socket With spark plug fixing clip. 5/8" (16 mm) x 70 x 3/8" � drive 5/8" (16 mm) x 70 x 1/2" � drive 11/16"(18 mm) x 70 x 3/8" � drive. 11/16"(18 mm) x 70 x 1/2" � drive 13/16"(20,6 mm) x 70 x 3/8" � drive 13/16"(20,6 mm) x 70 x 1/2" � drive

p/n 604 60 20 p/n 604 60 40 p/n 604 60 50 p/n 604 60 60 p/n 604 60 10 p/n 604 60 30

Spark plug joint socket 3/8“ � drive

model 1 with fixing clip SW 16 (5/8) x 85 Type : Universal, MB A class V6 Spark plug joint socket model 1 with fixing clip p/n 604 61 20

Injector disassembly tools For removing of seized injectors. With the adapter screwed into upper section of the disassembled injector and then using the impact hammer the injector is removed. Type: BMW CR-Diesel e.g. M57, M47 2,0l in the BMW 320, Citroen etc. Renault Trafic and Master, Opel Vivaro and Movano, Nissan Primastar and Interstar with Renault motor 1,9l dCi, e.c.: F9Q Disassembly adapter Special inbus socket insert Slide hammer model 38kg Injector disassembly tools 3 pcs.

p/n 603 84 40 p/n 603 84 17 p/n 614 88 00 p/n 603 84 20

Special inbus socket insert with bore 7,5mm Special inbus socket insert

p/n 603 84 171

Injector disassembly adapter Special for Bosch piezo injectors m14 x 1,5 : M18 x 1,5 Injector disassembly adapter piezo

B 18

p/n 603 84 405

Injector extractor model dci2,2 hydraulically For the extraction of seized injectors. This specially designed tool kit allows for mechanical or hydraulic extraction of seized injectors in the following engines: Type: Renault Motor 2,2/2,5 dCi, e.c.: G9T & G9U in the Espace, Laguna, Master, Vel Satis, Opel Movano, Nissan Primastar, Interstar Injector extractor model dci2,2 20 pcs.

p/n 603 83 95

Injector extractor supplement 12 pcs. with present MB CDi tool 603 84 00/10

p/n 603 83 90

Injector extractor model dci1,9 hydraulically For the extraction of seized injectors. This specially designed tool kit allows for mechanical or hydraulic extraction of seized injectors in the following vehicles: Type: Renault Megane, Scenic, Laguna, Trafic and Master, Opel Vivaro and Movano, Nissan Primastar and Interstar with Renault Motor 1,9l dCi, e.c.: F9Q Injector extractor model dci1,9 13 pcs in a case, complete

p/n 603 83 36

Injection nozzle extractor MB CDI engines For the extraction of seized CDI injectors. For use on all MB CDI models including A class, offers both mechanical and hydraulic extraction, with hydraulic extraction on A class models it is necessary to destroy the rocker cover. Injector extraction set Mercedes Benz CDI engines inclusive A class, 15 pcs in a case p/n 603 84 00

Injector extraction set Mercedes Benz CDI engines exclusive A class, 9 pcs p/n 603 84 10

B 19

Supplement set for MB A class 6 pcs Supplement to p/n 603 84 10

p/n 603 84 15

Supplement set 4-tlg. for extremely seized injectors p/n 603 84 45 Injectors extraction spindle M18 p/n 603 84 46 Nut with washer p/n 603 84 47 Support sheet p/n 603 84 49

Support elements for injector extraction set Mercedes Benz CDI engines, 4 pcs

p/n 603 83 65

Injector extraction set Mercedes Benz CDI engines 19 pcs

p/n 6038370

Injector extraction set For the removal of seized injectors in vehicles using PSA HDI engines type DW10ATED4 and DW12TED4, for mechanical or hydraulic extraction using a 20 tonne open core hydraulic cylinder. Type: PSA engines DW10ATED4 and DW12TED4 Peugeot, Citroen, Fiat, Suzuki, Ford, Volvo etc Injector extraction set

p/n 603 83 305

Injector extraction set Supplement to the existing tool set 30 pcs. p/n 60383305, 5 pcs. for PSA 2 valve engines e.c. DW10 RHY/RHZ (2.0 L / 8V) Type: Citroen, Peugeot, Fiat und Suzuki Injector extraction supplement set 5 pcs. for BOSCH injectors in PSA 2 valve engines DW10 RHY/RHZ p/n 60383320

B 20

Assortment of copper sealing rings 450 pcs Universal copper injector sealing ring set with 15 different combinations. P/n

External diameter

Internal diameter

Thickness

6039051 6039052 6039053 6039054 6039055 6039056 6039057 6039058 6039059 60390600 6039061 6039062 6039063 6039064 6039065

15 15 15 15 15 15 16 16 15,5 16 16,4 20 13,85 14,6 14,6

7 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,5 7,4 9,4 7,3 7,5 7,5

2 1 1,5 2 2,5 3 1,5 1,7 2 2 2 0,9 1,4 1,3 3

Assortment of copper sealing rings 450 pcs

p/n 603 90 505

Injector sealing seat cleaning & milling set UNI This is the optimized version of the cleaning and milling tool set. The advantages are clearly obvious: Can be used with HDi engines, diesel direct injection and common rail engines with BOSCH and DELPHI injectors. Shaft cleaning by brushes with machine drive, sealing seat cleaning with cutter 120° Ø. 21,0mm: 17,0mm stepped, miller 0° Ø. 17,0mm continuous, miller 0° Ø. 19,0mm: 17,0mm: 15,0mm stepped. Universal sealing ring puller for seized sealing rings. Cleaning brush set universal 18 pcs completely with holder, brushes and sealing ring extractor p/n 903 90 30 Cleaning brush set universal 17 pcs completely with holder, brushes without the sealing ring extractor p/n 903 90 40 Specially cleaning brush set 4 pcs with holder ¼ “bit drive 2 brushes and flexible drill holder p/n 903 90 35

Injector sealing seat cleaning & milling set PSA For cleaning and revising the injector shaft of PSA engines With the special brush the injector shaft wall, the sealing seat for the injector and the borehole for the injector nozzle are cleaned. In the case of heavy pollution and/or damage to the sealing seat it is precisely reworked with the milling tool, so that a perfect sealing surface is obtained. Type: PSA engines DW10ATED4 (RHW 2,0l 16V) & DW12TED4 (4HW 2,2l 16V) (Peugeot 407, 806, 807; Citroen C5, C8, Evasion; Fiat Ulysse; Lancia Phedra, Volvo S 40 ( II ), V 50 (new types); Suzuki Vitara, Ford Focus (2,0l 16 V from 2006) Cleaning brush set PSA 16 pcs completely with holder, brushes and sealing ring extractor p/n 903 91 200 Cleaning brush set PSA 15 pcs completely with holder, brushes without sealing ring extractor p/n 903 91 250

B 21

Sealing ring extractor For extracting the seized copper sealing rings from the injector shaft without damaging the cylinder head. Without this tool it is extremely difficult to remove the sealing ring without damaging the sealing seat. With an M10 thread for use with a slide hammer. Type: CDI engines e.g. MB, Opel, Renault engines with 2,2L (MC G9T) + 2,5L (MC G9U) , Nissan und PSA-Engine. Sealing ring extractor

p/n 603 90 700

Thread repair set M6 For repairing and/or renewing destroyed aluminium threads e.g. Injector retaining claw thread at the common rail cylinder head. With the special drill (3 edged, titanium-nitrate) the damaged thread is removed and the drilling for the threaded sleeve is produced. The cutting threaded insert is then placed with the turning tool. Type : Aluminium cylinder heads e.g. common rail Contents: Special drill (3 edged, titanium-nitrate) 10 self cutting thread bushes Threaded bush installer Thread repair set M6

p/n 604 17 80

Line key set 10, 11, 12, 13, 14mm hexagon each size as short and long ring spanner 12 point. Special socket 22mm x 3/8" Allows better power transmission and accurate tightening by torque wrench. With special sockets, each in a short and long version (e.g. for deep lying screw connections) this tool can be used for example for air conditioning lines or brake hoses according to specification and/or after manufacturer data. The torque wrench (e.g. 4061000) is applied axially to the screw centre; the torque value is thereby not falsified by an additional lever. Line key set in a metal case

p/n 605 11 50

Injector socket model 2

27mm x 1/2" ďż˝ drive, laterally milled open Internally machined socket For removing leak lines. Type : passenger cars also turbo Injector socket model 2

B 22

p/n 605 93 70

CR injector testing set model Master Diesel resistant Plexiglas block with 6 chambers (each 8 ml) on a chain. 6 silicone hoses each 37 mm long and 4 six-part sets with connectors for Bosch, Delphi, Denso and Siemens injectors. This is universally applicable equipment for examining the CR injector return rate. The return rate quantity of the injectors gives information of the condition of the individual injector e.g. with starting problems or a badly running engine Type: CR injectors from Bosch, Delphi, Denso, Siemens e.g. Ford, MB, Opel CR injector testing set model Master in a case

p/n 430 49 20

CR Injector measuring containers size III 120 ml measuring beakers with 1 m tubes and brass connectors. Containers for the ascertainment of the return rate of CR injectors, e.g. with starting problems or badly running engine. The return rate quantity of the injectors gives information of the condition of the individual injector. Typ:

CR-Injectors e.g. Opel, Ford (Delphi system)

CR Injector measuring containers size III 6pcs p/n 430 49 35 in a case

CR Injector connectors Connectors for CR injector test equipment model Master p/n 430 49 20 and measuring beaker size III p/n 430 49 35 Model C1 for Bosch injectors (Standard) 90 째 brass Model C2 for VDO/ Siemens injectors 90째 brass Model C3 for Denso injectors 90째 brass Model C4 for Delphi injectors 45째 plastic Model C1 (standard) 1 pcs Model C1 (standard) 6 pcs Model C2 VDO/ Siemens injectors 1 pcs Model C2 VDO/ Siemens injectors 6 pcs Model C3 Denso injectors 1 pcs Model C3 Denso injectors 6 pcs Model C4 Delphi injectors 1 pcs Model C4 Delphi injectors 6 pcs

p/n 930 49 36 p/n 930 49 38 p/n 430 49 36 p/n 430 49 46 p/n 930 49 39 p/n 430 49 43 p/n 430 49 34 p/n 430 49 39

B 23

Return flow measuring instrument for CR injectors Testing set for Common Rail return flow measurement of up to 6 injectors, applicable independent of engine design and injector manufacturer. Test possibilities: for starting problems a defective injector can be determined. Comparison of the return flow of different Common Rail injectors. Determination of the total return volume. The connection takes place through brass adapters on the return pipe of the injector or directly to the hose on the leakage oil nipple. The standard version is delivered with adapters for Bosch injectors. For other injector manufacturers further adapters are available Return quantities measuring instrument of CR injectors Set with 6 measuring beakers plastic p/n 430 49 06 Set with 4 measuring beakers p/n 430 49 04

CR piezo & Delphi injectors testing set For the examination in the new common rail systems of partly built in piezo and the new Delphi injectors. Different to conventional injectors in that return flow is not tested here for the examination and/or comparison of the injectors, but the pressure in the return system. The pressure ranges which can be measured depend on the injector manufacturer and the pressure specified for the respective engine. The injectors do not have to be removed for examination. The following diagnostic possibilities are given: 1. Defectiveness of the injector 2. Defectiveness of the pressure support valve 3. Bubble-free Diesel return Type: CR piezo injectors of Bosch & Siemens CR Delphi injectors new generation CR piezo BOSCH injectors testing set CR piezo SIEMENS injectors testing set CR DELPHI new generation testing set

p/n 430 49 60 p/n 430 49 70 p/n 430 49 80

Common-rail piezo & Delphi injectors testing set complete: 1 manometer, Plexiglas housing and 6 return hoses p/n 430 49 90 CR piezo injectors testing set with a pair hoses for Bosch + Siemens p/n 909 83 50 Single sets: Return hose connectable 2 pcs for Bosch CR-piezo injectors p/n 909 83 25 Return hose connectable 2 pcs for SIEMENS CR-piezo injectors p/n 909 83 05 Return hose connectable 2 pcs for DELPHI new generation injectors p/n 909 83 75

B 24

Digital Common Rail Sensor-und pressure test unit Digital pressure test unit with plug in adapters for the pressure and leakage test of the common rail injection system. The test unit is connected with the plug in adapters (see scope of supply) directly to the common rail pressure sensor. The existing system pressure is displayed and compared with the manufacturing data. Measuring range selectable of a) 0...1500 bar b) 0...1800 bar (resolution of measured values 10 bar). Error recognition by red LED, automatic disconnection after approximately 7 minutes. Voltage supply by 9 V compound battery. Scope of delivery: 1 basic unit CRP 02 1 adaptor cable for Mercedes vehicles 1 adaptor cable universal plug 1 adaptor cable for French and Italian vehicles Digital Common Rail Sensor-und pressure test unit p/n 430 49 00 Supply completely in the sturdy plastic case, without battery

Fuel pipe release pliers These pliers are required for the disassembly of the diesel fuel lines from the diesel filter on Fiat multi-jet engines. For example with the Fiat Grande Punto, Panda, Ducato Idea etc. These engines are also used in Opel and Suzuki vehicles. Fuel pipe release pliers

p/n 605 04 200

Battery tester F90 12-24Volt For testing the battery charge and the alternator Battery tester F90

p/n 909 09 00

Steel wire hole brushes with grasp Steel wire brushes for cleaning injector shafts, with a diameter 15.00 mm and 20.00 mm Type: Common Rail diesel engines such as PSA or Renault models, also suited to thinner or thicker shafts in the cylinder head. Steel wire hole brush 15x100 overall length 280.00 mm with wooden grip p/n 903 90 23 Steel wire hole brush 20x100 overall length 280.00 mm with wooden grip p/n 903 90 24 Steel wire hole brushes set 2 pcs 15x100 and 20x100 overall length 280.00 mm with wooden grip p/n 903 90 25

B 25

Stroboscope lamps for petrol and diesel engines Stroboscope lamps for professional use. The slim, pistol-like form allows work in the tightest of engine compartments. Robust construction with an analogue or digital display. Special high speed bulbs produce an extremely bright light. For vehicles with a diesel engine an adapter SKUA 01 is available. For specification see the following table. Supplied in a cardboard box

   

      





























Stroboscope lamp SKB82 without SKUA 01 p/n 609 08 82 Stroboscope lamp SKB84 without SKUA 01 p/n 609 08 84 Stroboscope lamp SKB86 without SKUA 01 p/n 609 08 86 Stroboscope lamp SKB84 with SKUA 01 p/n 609 09 00 Stroboscope lamp adapter for Diesel engines SKUA 01 p/n 609 09 25

B 26



  

Gearbox flange socket model 3 36mm x 12 edged x 1/2" drive Type : MB commercial vehicles gearbox G 2/ 24/ 27 Clutch flange MB passenger cars rear axel bearing W 140 Gearbox flange socket model 3 p/n 743 63 60 Hint: Also works with the VW Polo, Skoda Fabia drive shaft from `02

Extractor Krallex model F / S Twin & triple arm Span 25 - 130 mm Extractor arms 150/200/250 mm long Foot thickness 2.0/3.6 mm Outside and interior extractor with slim hooks particularly suitably for small gaps. Because of the different extractor arm lengths and different foot forms is it possible to use this extractor in a wide range of areas. Type : Universal 1 x twin arm bridge 25-130 mm 1 x triple arm bridge 25-130 mm 1 x spindle 210 mm lg. 1 x spindle with transverse grasp 250 mm long 3 x extractor arm size 1 100 mm long, with foot F 2,0 3 x extractor arm size 2 200 mm long, with foot F 2,0 3 x extractor arm size 3 250 mm long, with foot F 2,0 3 x foot Krallex 3,6 thick x 27 mm wide 3 x foot Krallex S 3,6 thick x 14 mm wide 1 x bracket

p/n 104 22 20 p/n 104 88 80 p/n 104 23 20 p/n 104 98 70 p/n 104 88 91 p/n 104 88 92 p/n 104 88 93 p/n 104 25 55 p/n 104 25 53 p/n 104 98 95

Extractor Krallex model F / S twin & triple arm in a steel box

p/n 104 98 10

Bearing extractor model K Hooks size 1 thru 3 Bearing nr: 6004 thru 6010, 6200 thru 6205, 6300 thru 6302 Hooks size 4 thru 6 Bearing nr.: 6011 thru 6015, 6206 thru 6211, 6303 thru 6307, 6403 thru 6404. For the disassembly of a range of ball bearing sizes. Because of the different extractor arms, the set of extensions and the adjustable three-arm bridge with a clamping range up to 120 mm it is possible to get optimal adjustment of the extractor. As the extractor grips at three points between the bearing outer race and inner race tilting can be prevented Basic equipment 1 x spindle 1 x three-arm bridge 3 x of attachment pins (hooks) 3 x of attachment pins (extensions) 1 x set of extensions (3 pcs) 2 x thrust piece Bearing extractor model K Basic equipment in a case with 6 hook sets size 1-6 Bearing extractor model K1 Basic equipment in a case with 3 hook sets size 1-3 Bearing extractor model K2 Supplement set, hook sets size 4 thru 6

p/n 610 57 00 p/n 610 56 80 p/n 610 56 90

C 01

Pressure piece set ALU Versatile pressure piece set made from aluminium. The installation forces are transferred evenly and carefully so that damage to ball bearings, sockets, shaft seals etc are avoided. For use with a rubber or plastic hammer Contents: 1 handle 120 mm long with retaining screw 9 pressure pieces with outside Ø: 40/ 44/ 50/ 59/ 63/ 65/ 72/ 76/ 81 Pressure piece set ALU 10 pcs

p/n 614 45 30

Transmission bearing ring extractor This set of special inner bearing extractors and slide hammer are used for extracting the diagonal roller bearing outer rings from the transmission case. Type: Renault: Master, Trafic, Espace, Laguna Opel: Movano, Vivaro Nissan: Interstar, Primastar Inner bearing extractor 6A Inner bearing extractor 7A Slide hammer 700 g Adapter 3/8“ inner – ½“ outer Transmission bearing ring extractor 4 pcs

p/n 104 96 61 p/n 104 96 71 p/n 103 02 10 p/n 904 96 05 p/n 910 17 00

Optional: For Renault gearbox PK1: inner bearing extractor 51-E7 40-75 mm with 3 jackets p/n 104 96 96 Counter support size 2 p/n 105 01 20

Ball bearing extractor For ball bearings, which sit on the axel or in the housing and thus can not be seized from the outside or by the hole. Type: ISO bearing series nr 6000 - 6012, 6200 – 6212, 6300 – 6310, 6403 – 6410 Ball bearing extractor

p/n 107 00 00

Pliers for retaining rings without grab holes For Renault vehicles this is a special pliers for the disassembly and assembly of the snap ring in the transmission case which secures the transmission shaft into the exit port. There are two different snap ring types: a weaker snap ring in all JC transmissions, such as the JB and JR transmission, and a strong, more solid ring in the transmissions PK1, PK6 and PF1, PF2. Pliers for retaining rings without grab holes

C 02

p/n 910 33 40

Clutch centring tool model 3 For centring clutches that do not have a crankshaft guide bearing. Type : passenger car universal Clutch centring tool model 3

p/n 611 85 00

Oil pan repair combination set M 13 , 15 , 17 x 1,5 For the repair of defective oil drain plug threads. The defective threads are removed with the threaded tap and extended to the next size. before/after M12 = 13 M14 = 15 M16 = 17 Type : Universal, e.g. Audi, VW, BMW, Ford, Opel 1 x tap M 13 x 1,5 1 x tap M 15 x 1,5 1 x tap M 17 x 1,5 3 x screw M 13 x 1,5 6 x screw M 15 x 1,5 long 3 x screw M 15 x 1,5 short 3 x screw M 17 x 1,5 With copper sealing rings Oil pan repair combination set in a plastic case

p/n 912 55 00

Oil pan repair set model 1, 2 & 3 For fast and low-priced repair of defective oil drain plug threads in the oil pan. Each set consists of one tap and 16 spare screws with sealing rings in a plastic case. Tap M 15 x1,5 12 x screw M 15 x 1,5 x 24 with sealing ring Oil pan repair set model 1

p/n 612 51 00 p/n 612 51 50 p/n 612 52 00

Tap M 15 x1,5 4 x screw M 15 x 1,5 x 24 with sealing ring 4 x screw M 15 x 1,5 x 16 with sealing ring Oil pan repair set model 1a

p/n 612 51 00 p/n 612 51 50

Tap M 17 x 1,5 16 x screw M 17 x 1,5 x 16 with sealing ring Oil pan repair set model 2

p/n 612 52 50 p/n 612 51 70 p/n 612 53 00

Tap M 13 x 1,5 12 x screw M 13 x 1,5 x 16 with sealing ring Oil pan repair set model 3

p/n 612 50 80 p/n 612 51 30 p/n 612 54 00

Refilling packs sealing rings: M 13 Copper (10 pieces) M 15 Copper (10 pieces) M 17 Copper (10 pieces)

p/n 612 51 60 p/n 912 12 00 p/n 612 51 75

M 13 Aluminium (10 pieces) M 15 Aluminium (10 pieces) M 17 Aluminium (10 pieces)

p/n 612 51 33 p/n 612 51 61 p/n 612 51 79

Spare screws M15 x 1,5 x 16 (packing unit 5pcs) Spare screws M15 x 1,5 x 24 (packing unit 5pcs)

p/n 912 10 50 p/n 912 11 50

p/n 912 11 00

C 03

Oil pan repair set model 4 M 20 / 24 x 1,5 For the repair of defective oil drain plug threads. The defective threads are removed with the threaded tap and extended to the next size. Before /after M18 = 20 M22 = 24 Type : Alfa Romeo, Fiat, Lancia und Volvo Tap M 20 x 1,5 5 x screw M 20 x 1,5 Copper sealing rings M 20 (10 pieces) Aluminium sealing rings M 20 (10 pieces) Tap M 24 x 1,5 5 x screw M 24 x 1,5 Copper sealing rings M 24 (10 pieces) Aluminium sealing rings (10 pieces) Oil pan repair set model 4 in a case

p/n 612 56 50 p/n 612 56 60 p/n 612 56 75 p/n 612 56 85 p/n 612 57 50 p/n 612 57 60 p/n 612 57 75 p/n 612 57 85 p/n 612 56 00

Additional individual sets in a case: Contain tap and 10 screws, sealing rings aluminium & sealing rings copper Oil pan repair set model 4a M 20 x 1,5 p/n 612 56 10 Oil pan repair set model 4b M 24 x 1,5 p/n 612 56 20

Oil service socket

10mm � drive x 1/2" � drive Type : Ford Sierra, Granada diesel engine, Peugeot, Volvo V 6, Opel Frontera 8mm � drive x 3/8" � drive Type : Peugeot, Volvo 264, Renault all from `83 Nissan Micra 1,5 D till `98 Opel Vivano Oil service socket 10 � Oil service socket 8 �

p/n 612 03 20 p/n 612 03 30

Oil service key set Specially hardened set of keys for the disassembly and assembly of most normal oil drain plugs. Adapter 1/2" � drive for the acceptance of the inserts p/n 612 21 00 Insert size 1 8 mm x 3/8" hexagon p/n 612 20 10 Insert size 2 10 mm x 11 mm hexagon p/n 612 20 20 Insert size 3 12 mm x 13 mm hexagon p/n 612 20 30 Insert size 4 14 mm x 17 mm hexagon p/n 612 20 40 Insert size 5 8 mm x 3/8" square p/n 612 20 50 Insert size 6 19 mm x 17 mm hexagon p/n 612 20 60 Oil service key set 7 pieces in a metal box p/n 612 20 00

Universal oil service socket set This 17 piece universal oil service socket set offers along with triangular, square and hexagonal and many other required variants, all have a 3/8 “ drive . Universal oil service socket set 17 pieces special sizes p/n 9122010

C 04

Oil filter spanner model F For oil filter 60 - 110 mm Ø. With one handed operation this tool is ideal for hard to reach oil filter housings. Oil filter spanner model F Spare band

p/n 612 18 00 p/n 612 18 50

Oil filter chain with joint Type : Universal 60 – 110mm Oil filter chain with joint

p/n 910 12 00

Oil filter spider

3/8" � and 19mm hexagon drive Step less adjustment from 60 to 120 mm Ø. Oil filter spider Mod. US

p/n 612 00 20

Alternatively: 1/2"� and 21mm hexagon drive Step less adjustment from 63 to 102 mm Ø Oil filter special spider

p/n 912 00 30

Oil filter key model G For easy loosening of oil filters possible even in the tightest of engine compartments Oil filter key 65 - 80 mm Ø Oil filter key 80 - 100 mm Ø

p/n 912 00 00 p/n 912 00 10

Oil filter special key assortment 3 pcs Three most popular oil filter keys in a particularly short version with 1/2"� drive and 21mm hexagonal. Sizes are 27, 32 and 36mm each with an overall height of 32 mm. Special Oil Filter key assortment 3 pcs

p/n 912 08 75

C 05

Oil filter key

3/8" ďż˝ Drive x 27mm hexagon For the disassembly/assembly of oil filters or filter cartridges. 65mm 14 sided 66mm 6 sided 74mm 8 sided 74mm 8 sided 14mm sided 92mm 10 sided 95mm 15 sided 100mm 15 sided 105mm 10 sided

p/n 912 00 67 Fiat, Renault p/n 912 00 66 Fiat, Iveco, Opel, VM p/n 612 00 65 VM diesel engines p/n 912 00 60 MB, Porsche, BMW, VAG p/n 912 01 20 Alfa 156, 166 diesel engines p/n 912 00 70 Toyota, Alfa, Ford, GM p/n 912 01 80 Kia, Hyundai, Mitsubishi p/n 912 01 90 MAN, OEM, D-0826-LUH/LF3506 p/n 912 01 95

Burl oil filter key Ă&#x2DC; 92 36 burl Ford

p/n 912 00 71

Oil filter key for Haldex clutch 46mm 12 sided. x 390 mm long For the disassembly/assembly of the oil filter on the Haldex clutch allows easy access to this difficult to reach filter. Type : VW 5 /6 speed gearbox 4WD , in the Golf IV, Bora, Sharan, Skoda Octavia Oil filter key Haldex clutch

p/n 611 96 50

Steering wheel puller model GM Span width 90 mm, span depth 87 and 135 mm Type: Opel passenger cars with standard and sport steering wheels. Steering wheel puller model GM Spare parts: Replacement hooks 135 mm long Replacement hooks 87 mm long Spindle 200 mm long.

p/n 106 20 20 p/n 106 24 20 p/n 106 24 10 p/n 104 57 30

Steering wheel puller model D trucks Four legged steering wheel puller for trucks with 2 sets of spindles size M 8 + M 10. Type : MB (e.g. DB 1632) and Iveco Steering wheel puller model D trucks

C 06

p/n 106 36 00

Steering wheel spacer puller. Total length 75 mm, 42 mm Ă&#x2DC;. For removing the spacer from the steering column on VAG vehicles. The spacer must be pulled, when the ignition switch is renewed. The puller is put over the spacer and locked with a clamping sleeve. The spacer can now be pulled off over the spindle. Type : Audi / VW, Seat Steering wheel spacers puller

p/n 617 15 00

Ball joint separation fork. For the release of ball joint pins on automobiles, land and construction machines, hydraulic plant and large machinery. Model Fork opening Overall length SizeT3* 18 mm 300 mm SizeT4 29 mm 300 mm SizeT5 39 mm 350 mm SizeT6 45 mm 350 mm Hint*: BMW E36 front axle ball joint.

p/n 106 40 30 p/n 106 40 40 p/n 106 40 50 p/n 106 40 60

Ball joint extractor model T 1 Fork opening: conical 18-22 mm. For fast and undamaged extraction of ball joints in the suspension and steering. Ball joint puller model T1

p/n 106 40 10

Ball joint/ball pin ejector Model T11 - T12 For safe ejection of the swivel joints from the stub axle and steering arm (wishbones and McPherson struts). Model T11 Fork opening 20 mm, clamping range 12 - 50 mm Type : Opel front wheel drive, Ford passenger cars, Transit, VW, Audi 80 / 100 / 200, Transporter, BMW, MB, Citroen (except CX), Renault, Fiat, all Japanese, Honda (ball joint) commercial vehicles (shift linkage) Model T11P Fork opening 24 mm, clamping range 12 - 50 mm Type : Audi A 4/ 6 /8, Opel Movano, Porsche, Renault Master Model T11 MB with slot Type : MB W203 and 210 Model T12 Fork opening 20 mm, clamping range 50 - 80 mm Type : Opel Omega A/B, Senator, VW-Transporter Model T 11 Model T 11P Model T 12 Model T11 MB with slot

p/n 106 45 00 p/n 106 45 70 p/n 106 46 00 p/n 106 45 80

C 07

Ball joint ejector model SP1 commercial vehicles For ball joint -Ă&#x2DC; : 27 - 36 mm Rate of cut max. : 90 mm workshop-tested, heavy version for high strain Type : e.g. MB Atego till 18t, MAN, Iveco, Renault, Scania, Volvo, DAF Model SP 1 with mechanical spindle Spindle and anvil are exchangeable depending upon the space required. Model HS 1 with 12 tonne hydraulic spindle Improved power with the 12 tonne hydraulic spindle. Model HZ 1 with 10tonne hydraulic cylinder. Faster, safer and easier to use, with quick coupler for use with our hydraulic hand pump, connector and hose. Model SP 1 with mech. spindle p/n 106 44 30 Model HS 1 with hydraulic spindle 12t p/n 106 44 40 Model HS 1 without hydraulic spindle 12t p/n 106 44 39 Model HZ 1 with hydraulic cylinder 10t p/n 106 44 45 Model HZ 1 without cylinder p/n 106 44 44

Ball joint ejector for commercial vehicles For ball joint Ă&#x2DC; : 35-45mm Rate of cut max. : 115 mm workshop-tested, heavy version for high strain Type:

MB Actros, Atego from 18t, SK MAN F 2000, TG, low-floor vehicle Iveco Euro Star, Tech, Turbo-Star Renault, Scania, Volvo, DAF

Model SP with mechanical spindle. Spindle and anvil are exchangeable depending upon the space required. Model HS with hydraulic spindle 12t Improved power with the 12 tonne hydraulic spindle Model HZ with hydraulic cylinder 10t Faster, safer and easier to use, with quick coupler for use with our hydraulic hand pump, connector and hose. Model SP with mech. spindle Model HS with hydraulic spindle 12t Model HZ with hydraulic cylinder. 10t Model HZ without cylinder Hydraulic flat cylinder 10t With strong spring release and SW quick-coupler.

C 08

p/n 106 43 30 p/n 106 43 40 p/n 106 43 50 p/n 106 43 49 p/n 802 51 60

Ball joint extractor universal Fork opening of 22,0 mm quadruple adjustability. This high-quality, solid universal extractor is characterised by the possibility for quadruple elevation adjustment. This puller is adjustable in the height on 24,0 - 30.0 - 40.0 - 45.0 mm. and has a fork opening of 22,0mm and a overall length of 155,0mm Ball joint extractor universal

p/n 906 46 00

Ball joint ejector model T 8 For ejecting the ball joint from tie rods etc. Allows for safe and simple operation. Size Fork opening Clearance 1 18 mm 40 mm 2 25 mm 50 mm 3 29 mm 60 mm 4 40 mm 80 mm 5 46 mm 90 mm

Headroom 35 mm 45 mm 55 mm 80 mm 100 mm

p/n 106 42 80 p/n 106 42 90 p/n 106 43 00 p/n 106 43 10 p/n 106 43 20

Ball joint ejector For ejecting the ball joint from track rods, hubs and stabilisers etc. Particularly suitable where there is little space. Size 1 fork opening 23 mm Type : Audi, VW, BMW, Citroen Jumper, Fiat Ducato, Ford, MB e.g. 202, 210, Opel, Peugeot Boxer, Renault, Rover, SAAB, Volvo, Japanese passenger cars Size 2 fork opening 28 mm Type : Audi A4, A6, A8, VW Passat from `97, MB Size 3 fork opening 34 mm Type : MB Sprinter, VW LT Ball joint ejector size 1 Ball joint ejector size 2 Ball joint ejector size 3 Ball joint ejector set 3 pcs.

p/n 106 44 50 p/n 106 44 60 p/n 106 44 70 p/n 106 44 75

Ball joint ejector model B 26 mm fork opening, 45 mm clearance With a slim at the rear open construction for ejecting ball joints from stub axles and track rods. Type: BMW E 46 et al. Ball joint ejector model B

p/n 106 44 80

C 09

Fixing thorn sub frame For fixing the sub frame e.g. during oil pan disassembly, silent bearing change or accidental damage for which the sub frame must be moved and/or dismantled. Thereby is partially an otherwise necessary wheel alignment void. Model 1 2-tlg. p/n 617 44 80 Type : Audi A4 / A8, A6 from 97´, Passat from `97

Universal spur measuring setting jig. Also suitable for small panel vans For fixing the „Spur“ (toe in – toe out) on track rods during repair to the stub axle or when replacing the track rod ball joint Type : passenger cars and small panel vans Universal spur measuring setting jig set 12 pcs.p/n 917 45 50

Track rod spanner Two sets with two tie rod keys and a 1/2" square drive available in sizes 17 and 22 mm Track rod special spanner 1/2" drive 17 Track rod special spanner 1/2" drive 22

p/n 917 20 00 p/n 917 22 20

Track rod spanner set With 7 spanner inserts ( 14, 17 & 33,6mm, 3/16”, 1 1/4” ,1 5/16” & 1 7/16”) for operation of the internal tie rod nut.

C 10

Track rod spanner set

p/n 917 30 00

Extra spanner inserts Spanner insert 27mm Spanner insert 32mm Spanner insert 34mm Spanner insert 38mm

p/n 917 27 00 p/n 917 32 00 p/n 917 34 00 p/n 917 38 00

Spring compressor with basic equipment Max. 2300 Kg bracket set 80-160mm + bracket set 140-195mm Due to its large clamping range this extremely sturdy spring compressor set with newly developed spring brackets is suitable for most passenger car and vans with conventional vehicle springs. This is a highly cost effective tool as the versatility negates the requirement to purchase additional clamps for the tool The set comprises of the basic device with a maximum capacity of 2.300 kg, as well as 2 spring brackets for spring diameters of 80 160 mm and 140 - 195 mm. The spindle in the basic device can be operated with an impact gun. The spring brackets are coated with plastic. Brackets are also available suitable for conical springs. Ball springs can also be clamped. With a clamping force of max. 2,300 kg and the employment of a bracket adapter in connection with the standard bracket it is possible to clamp the new asymmetrical suspension of e.g.: VAG, BMW, MB etc. Further technical data and detailed application lists can be found in the enclosed operating instructions. Spring compressor set for McPherson shock struts with 2 pair coated spring brackets, tensile force max 2.300 Kg p/n 915 93 20

Spring compressor basic device round McPherson shock struts, tensile force max 2.300 Kg p/n 915 93 00

Spring brackets size 3 plastic coated for 2,3 t basic device 80 160mm application range, double support function p/n 915 93 56

Spring brackets size 5 plastic coated for 2,3 t basic device 140 - 195mm application range, double support function p/n 915 93 58 Spring bracket adapter one piece plastic coated for 2,3 t basic device asymmetric suspensions like e.g.: VAG, BMW, MB p/n 915 92 65

D 01

Spring compressor model P22 Max Tension. 22.500N, GS and TĂ&#x153;V tested. Total length with SW 27 drive hexagon 480 mm Span ca. 340 mm This spring compressor is designed for extremely high loads and is delivered with 2 pairs of standard spring brackets. Suitable for use on the majority of modern motor vehicles. The maximum tension is determined specific to the new generation of vehicles, e.g. AUDI, BMW and MB. For the protection and better grip of the springs the spring brackets are made from special cast steel which is plastic-coated. Examples of use Size bracket II Audi, BMW, Daihatsu, Fiat, Ford, Honda, Hyundai, Mazda, Mitsubishi, Nissan, Opel, Rover, Seat, Skoda, Subaru, Suzuki, Toyota, VW III Audi, Citroen, Daihatsu, Fiat, Ford, Honda, Hyundai, Kia, Mazda, , Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Subaru, Toyota, Volvo, VW V Audi, BMW, Citroen, Fiat, Ford, Honda, Hyundai, Kia, Mazda, MB, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Subaru, Suzuki, Toyota, Volvo, VW VII Renault, Toyota X conical and ball springs - Audi, Chrysler, Citroen, Fiat, Ford, Hyundai, Kia, Mazda, Nissan, Opel, Peugeot, Saab, Seat, Toyota, VW Spring compressor basic device 22.500N Spring bracket size III (pair) 100-155 mm Spring bracket size V (pair) 155-200 mm Spring compressor standard 22.500N With 2 pair brackets ( size. III/V )

p/n 615 93 00 p/n 615 93 56 p/n 615 93 58 p/n 615 93 20

Accessories: Spring bracket size II (pair) 80-120 mm p/n 615 91 90 Spring bracket size VII (1 pcs) 180-235 mm p/n 615 93 59 Spring bracket size VIII/IX (pair) Peugeot p/n 615 92 40 Spring bracket size X (1 pcs) 150 mm, conical springs p/n 615 91 15 Spring bracket size XI (1 pcs) BMW E39/46 (top) p/n 615 92 65 Additional the bracket size V is needed. Spring bracket size XII (1 pcs) MB C class (top) p/n 615 92 70 A-/E-/ M class, additional the bracket size V is needed. Spring bracket size XIII (1 pcs) MB E class 211 (top) p/n 615 92 80 Additional the bracket size II is needed. Spring bracket size IX (pair) left spiral Chrysler Voyager p/n 615 92 95 Repair set RP22 spindle, thread block, rivet, hexagon nut, guard pin

D 02

p/n 615 93 10

Spring compressor model PK GS tested Tension force 15000N, span 280 mm With plastic-coated hooks for the disassembly/assembly of coil springs on the vehicle. Simple assembly with plastic coated safety loop and a wedged security hook. Type : Universal, e.g. Opel Vectra C front axle Spring compressor model PK

p/n 106 11 00

Shock absorber spanner model 2 5,1 and 6,1 mm flat / oval The moveable grip can move along the central tube. So the key does not have to be changed when there is little room around the shock absorber. Type : Universal

Shock absorber spanner model 2

p/n 620 00 30

Draw hook UNI Thread; M 18 x 1,5 Headroom: approx. 110 mm Hook width: approx. 28 mm Weight: 2.34 kg Solid draw hook applied with our 5kg or 8kg slide hammers. The draw hook is very versatile and can be used e.g. for separating connections such as ball joint (wishbone)/wheel bearing housing or shock strut/wheel bearing housing as well as rough alignment work. Type: Universal e.g. Ford Mondeo, MB Vito front axle Draw hook UNI (without slide hammer)

p/n 953 55 30

Slide hammer 5 kg Slide hammer 8 kg

p/n 614 87 90 p/n 614 88 00

practice

Spring compressor MB Spring compressor for MB 123, 124, 126, 140, 201, 202, 210 Consists of the basic device with 2 pairs of holders Spring compressor MB

p/n 615 65 00

Separation tool kit shock absorber out of the knuckle Renault Megane II 8 pcs Separation tool kit for simple separation of the shock absorber from the knuckle on the Renault Megane II Separation tool kit 8 pieces

p/n 921 40 00

D 03

Basic device U 14 Basic device for the fast professional and damage free replacement of bushes, bearings and ball joints. Used with either a hydraulic spindle or hydraulic cylinder this versatile tool can be used on a large number of vehicles. Basic device without attachments Restrictor insert Safety cable 1000 mm Basic device U 14 - base

p/n 614 91 01 p/n 614 91 43 p/n 802 51 15 p/n 614 91 00

a) basic device model U 14 S with 12t hydraulic spindle Due to the 10 mm spindle stroke this variant is particularly suitably for the change of ball joints. The hydraulic spindle is also used in different wheel hub extractors. (6146850 und 6148679). * Basic device base *Thread adapter for hydraulic spindle 12t hydraulic spindle with thrust piece Basic device model U 14 S * Basic device without hydraulic spindle

p/n 614 91 00 p/n 614 91 41L p/n 104 16 500 p/n 614 91 05 p/n 617 54 05

b) basic device model U 14 H with 12t hydraulic open core cylinder The reliable 12t hydraulic open core cylinder with a stroke of 42 mm is equally suitable for ball joints, bushes and wheel bearings*. To operate the hydraulic cylinder a hand pump, hydraulic hose and hose adapter must be used.

practice

D 04

* Additional requirement: wheel bearing spindle

p/n 614 71 40

Basic device base 12t adapter for hydraulic open core cylinder 12t spindle 3 pcs for hydraulic open core cylinder Hydraulic open core cylinder 12t Basic device model U 14 H

p/n 614 91 00 p/n 614 91 47 p/n 617 60 80 p/n 802 51 00 p/n 614 91 10

Hydraulic adapter model P12 p/n 614 91 49 When using the 12t cylinder with the basic device made by the company Paschke. The pressure spindle p/n 6176080 must be used.

Ball joint removal and replacement sets These ball joint removal and replacement sets can are specific to the basic device U14

Model 2A Type :

MB 211, 220

Supporting sleeve Press out bolt Press in sleeve Support disk Press piece set model 2A, 4 pcs

p/n 614 89 31 p/n 614 89 32 p/n 614 89 33 p/n 614 89 34 p/n 614 89 30

Model 3 Type :

Renault Laguna

Press out bolt Press out sleeve Press in sleeve Press in bolt Press piece set model 3, 4 pcs

p/n 614 90 61 p/n 614 90 62 p/n 614 90 63 p/n 614 90 64 p/n 614 90 60

Model 5 Type :

MB Sprinter, VW LT from 97

Support sleeve Press piece A Press in sleeve Support ring E Press piece set model 5, 4 pcs

p/n 614 90 71 p/n 614 90 72 p/n 614 90 73 p/n 614 90 74 p/n 614 90 70

Model 6 Type :

VW T4

Support sleeve Press piece A Press in sleeve Press piece E Press piece set model 6, 5 pcs

p/n 614 90 91 p/n 614 90 92 p/n 614 90 93 p/n 614 90 94 p/n 614 90 85

Model 7 Model 7a Type :Opel Movano, Renault Master bottom control arm Model 7b Type :Opel Movano, Renault Master top control arm Model 7a Support sleeve A Press piece A Press piece E Support sleeve E Press piece set model 7a, 4 pcs

p/n 614 94 56 p/n 614 94 57 p/n 614 94 58 p/n 614 94 59 p/n 614 94 65

Model 7b Press piece A Support sleeve A Support sleeve E Press piece E Press piece set model 7b, 4 pcs Press piece set model 7a&b, 8 pcs

p/n 614 94 51 p/n 614 94 52 p/n 614 94 53 p/n 614 94 54 p/n 614 94 60 p/n 614 94 70

D 05

Model Type : PSA 106, 206, AX, Saxo Combined press piece Countermove support sleeve Press in piece Press piece set for ball joints 3 pcs

p/n 614 90 21 p/n 614 90 22 p/n 614 90 23 p/n 614 90 20

Press piece set bushes For changing the bushes on the front and rear axles without the need to dismantle the axle. Press piece sets I to VI are only suitable for use with the specified basic device U14. Type : Audi, VW with front wheel drive

Press piece rear axle Type : Golf III from `92 rear axle Here for recommended basic devices: p/n 617 54 40, p/n 617 55 00 U-Profile Press piece E Press bolt Press piece A Guiding sleeve Allen key 5 Press piece set VIa

D 06

p/n 617 51 01 p/n 617 51 05 p/n 617 51 07 p/n 617 51 09 p/n 617 51 08 p/n 525 20 50 p/n 617 51 00

Bush and bearing set universal Universal tool kit for the removal and replacement of bushes, hydraulic bearings, sockets, ball bearings, shaft seals etc. Dependent upon the requirement the individual sleeves can be modified (e.g. cut outs can be added). As well as being used with the spindles supplied it can also be used on the workshop press. Contents: 4 stepped disks Nr. 1 size 34, 42, 50, 58, 66 Nr. 2 size 36, 44, 52, 60, 68 Nr. 3 size 38, 46, 54, 62, 70 Nr. 4 size 40, 48, 56, 64, 72 4 spindles M 10, 12, 14, 16 8 x press nuts M10, 12. 14, 16 20 press sleeves Ă&#x2DC; inside/outside 34 / 44 36 / 46 38 / 48 40 / 50 42 / 52 44 / 54 46 / 56 48 / 58 50 / 60 52 / 62 Type:

Ă&#x2DC; inside/outside 54 / 64 56 / 66 58 / 68 60 / 70 62 / 72 64 / 74 66 / 76 68 / 78 70 / 80 72 / 82

Universal

Bush and bearing set universal 36 pcs

p/n 617 69 30

36 pcs universal bush and bearing kit with 12.9 quality spindles Universal 36 pcs bush and bearing kit with 12.9 quality spindles p/n 914 46 50

Supplementary 13 pc set of 12.9 quality spindles, nuts and adapters for press and drawing sleeve set Draw adapter M10 Draw adapter M12 Draw adapter M14 Press nut M12 Press nut M14 Press nut M16 Spindle 12.9 M10 Spindle 12.9 M12 Spindle 12.9 M14 Spindle 12.9 M16

p/n 91445400 p/n 91445402 p/n 91445404 p/n 91446560 p/n 91446570 p/n 91446580 p/n 91446510 p/n 91446520 p/n 91446530 p/n 91446540

Supplementary 13 pc set of 12.9 quality spindles, nuts and adapters for press and drawing sleeve set p/n 914 45 500

D 07

Rear bush toolkit model RL rear axle

practice

For the removal and replacement of the bushes in the rear axle of the Renault Laguna II. For alignment of the bushes (left/right) an assembly jig can be included in the set. The tool can be operated both mechanically and hydraulically. For hydraulic operation our 12t hydraulic open core cylinder p/n 8025100 (not contained in the set) must be used. Type: Renault Laguna II Bush toolkit model RL 8 pcs without assembly jig in a case Rear bush toolkit model RL 9 pcs complete with assembly jig in a case

p/n 617 64 35 p/n 617 64 20

Bush tools model N1 supplement for commercial vehicles Supplement to bush toolkit p/n 6175350. For the new bush (Ø 68, 00 mm) in the leaf spring eye. Type: MAN Bring in funnel nr. II Drawing in disk nr. II Bush tools model N1 supplement 2 pcs

p/n 617 53 56 p/n 617 53 57 p/n 617 53 58

Bush tools model N2 supplement for commercial vehicles Supplement to silent bush toolkit p/n 6175360. To change the following original slotted bushes: Nr. 1 p/n 000 322 1285 Nr. 2 p/n 000 325 0785 ZGS 002 Type: MB, e.g.. Leaf spring eyes Bring in funnel nr. 1 Ø 59,7 mm Drawing in disk nr. 1 Bring in funnel nr. 2 Ø 60,8 mm Drawing in disk nr. 2 Bush tools model N2 supplement

p/n 617 53 68 p/n 617 53 69 p/n 617 53 66 p/n 617 53 67 p/n 617 53 70

Bush tools axle suspension commercial vehicles For the disassembly/assembly of the stabilizer bush using the workshop press. Type: MB Actros front axle suspension new bush with Ø 75 mm Cone sleeve Press bolt Clamping sleeve bolt Stepped sleeve Bush tools axle suspension 4 pcs

D 08

p/n 617 53 96 p/n 617 53 97 p/n 617 53 98 p/n 617 53 99 p/n 617 53 95

Drive shaft socket

77 x 1/2" � drive 30mm x hexagon. Type : Universal

30mm x twelve-point Type : Audi, Opel, Renault VW Golf III, Vento u. Passat VR 6 36mm x twelve-point Type : VW Polo (9 N) Socket 30mm x hexagon. Socket 30mm x twelve-point. Socket 36mm x twelve-point.

p/n 742 63 00 p/n 743 63 00 p/n 743 63 60

Axle nut socket Type : for Ford Transit from `91, axle nr. 34 2 1/4" (57mm) - twelve-point 3/4" � drive

p/n 752 57 00

Type : IVECO 65mm twelve-point 1" � drive

p/n 762 65 00

Drive shaft socket set 1/2"  drive Special thin walled impact sockets and one-piece socket hexagon inserts. Hexagon inserts 14mm x 43 mm long p/n 610 34 91 Hexagon inserts 17mm x 43 mm long p/n 610 34 92 Hexagon inserts 19mm x 43 mm long p/n 610 34 93 Socket 27mm twelve-point x 85 mm long x Ø 42 mm p/n 610 34 98 Socket 30mm twelve-point x 85 mm long x Ø 42 mm p/n 610 34 94 Socket 32mm twelve-point x 85 mm long x Ø 42 mm p/n 610 34 95 Socket 34mm twelve-point x 85 mm long x Ø 42 mm p/n 610 34 97 Socket 36mm twelve-point x 85 mm long x Ø 42 mm p/n 610 34 96 Drive shaft socket set 8 pcs

p/n 610 34 90

Drive shaft socket set 1/2"  drive Special thin walled impact sockets and one-piece socket hexagon inserts. Socket hexagon inserts; 14, 17 & 19mm Sockets; 30, 32 & 36mm Drive shaft socket set 6 pcs

p/n 614 60 00

D 09

Drive shaft sockets 1/2"  drive Special thin walled impact socket. Type: PSA Socket 35mm hexagon x 85 mm long x Ø 47 mm p/n 794 23 50 Socket 36mm hexagon. x 85 mm long x Ø 47 mm p/n 794 23 60

Drive shaft separating tool Helpful tool for taking off and/or separation of the constant velocity joints from the drive shaft of passenger cars with front wheel drive. High time saving while exchanging the gaiter, no impact damage by striking with hammers, universally applicable. Patented tool recommended in the SEAT/VW data base Drive shaft separating tool "VAG"

p/n 910 33 55

Drive shaft separating tool Type : Audi, VW, Seat and Skoda For dividing the drive shafts held by a necked-down bolt. The drive shaft joint separation tool is operated by the 12 tonne hydraulic spindle (p/n 104 16 50). Pressure piece size 2 diameter 10,0 mm Pressure piece size 1 diameter 8,0 mm Thread insert M14 x 1,5 Thread insert M16 x 1,5 short Thread insert M16 x 1,5 long Basic device sleeve with support Drive shaft separating tool set 6 pcs

p/n 610 33 39 p/n 610 33 41 p/n 610 33 42 p/n 610 33 43 p/n 610 33 46 p/n 610 33 44 p/n 610 33 40

p/n 610 33 40 Set 6 pcs as above 12 tonne hydraulic spindle p/n 104 16 50 Drive shaft separating tool set 7 pcs incl. hydr. spindle p/n 610 33 45

Circlip squeezing pliers 285 mm long. For pretension of the drive shaft circlip when assembling the outer joint. The snap ring which is pretensioned by the pliers strengthened spring ensures a fast and damage-free assembly of the joint Type : Audi, VW, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Seat, Skoda, Subaru, Suzuki, Toyota, etc. Circlip squeezing pliers.

D 10

p/n 610 33 30

Hose band pliers model DR. For CV boot hose clamps made from stainless steel on the drive shaft. The pliers have a 1/2" square in both handles for the use with an extension tool or torque wrench. Effective relationship 1:3,4. Type : e.g. Audi, Opel, VW Hose band pliers model DR

p/n 122 65 00

Hose band pliers model o. O. For "earless" clips , e.g. at drive shaft seals, coolant and fuel hoses. Due to the fine points these special hose clips can be installed problem-free with these pliers. Type : e.g. Audi, VW, MB, Toyota Hose band pliers model o. O. Hint: Retaining clip of the air cleaner Opel Astra

p/n 122 65 50

Drive shaft retraction nuts Impact nuts with connection thread M 18 x 1.5 M 22 x 1, M 18 x 1.5, M 22 x 1.5, M 20 x 1, M 24 x 1.5, M 20 x 1.5, M 27 x 1.5, M 20 x 1.25, M 30 x 1.5. To retract the drive shaft with our slide hammer p/n 6148790/95 or hub extraction flanges p/n 6148725/6148685 Application sample Thread protection during the disassembly of the drive shaft from the wheel hub and for transmission lateral loosening of the drive shaft. For dividing and separating the often very tight joint; the advantage is that there will be an even and horizontal draw. For retracting the precisely fitting drive shaft teeth into the wheel hub until the hub nut can be fitted Drive shaft impact nut size 0 M16 x 1,5 Drive shaft impact nut size 1*M18 x 1,5 Drive shaft impact nut size 2*M20 x 1 Drive shaft impact nut size 3*M20 x 1,5 Drive shaft impact nut size 4*M20 x 1,25 Drive shaft impact nut size 5*M22 x 1 Drive shaft impact nut size 6*M22 x 1,5 Drive shaft impact nut size 7*M24 x 1,5 Drive shaft impact nut size 8*M27 x 1,5 Drive shaft impact nut size 9*M30 x 1,5 Retract spindle with nut* Adapter/ housing with bearing* Drive shaft impact nut sizes 1 till 9, 9 pcs Drive shaft retraction nuts 11 pcs.*

p/n 610 33 06 p/n 610 33 08 p/n 610 33 10 p/n 610 33 15 p/n 610 33 25 p/n 610 33 33 p/n 610 33 35 p/n 610 33 37 p/n 610 33 38 p/n 610 33 47 p/n 610 32 80 p/n 610 32 83 p/n 610 33 07 p/n 610 33 20

D 11

Transmission shaft extractor Type : Fiat Ducato Transmission shaft extractor

p/n 611 84 00

Thread cut nuts set 32mm hexagon drive For the re-cutting of damaged threads on drive shafts. Contents: M 20 x 1,25 M 22 x 1 M 20 x 1,5 M 22 x 1,5 13/16" x 20 M 24 x 1,5 3 /4" x 20 M 24 x 2 Type : Universal Thread cut nuts set 8 pcs. in a plastic box

p/n 276 50 00

Disassembly tool kit for VAG models For the disassembly of the bolted wheel hub bearing unit and the drive shaft.

D 12

Combined disk Support tube 3 screws M14x1,5x60 10.9 with washers Adapter 1 1/2â&#x20AC;&#x153; 16G : M18x1,5 Puller disk Disassembly tool kit

p/n 916 94 74 p/n 916 94 73 p/n 614 87 285 p/n 614 87 10 p/n 916 94 72 p/n 916 94 70

Disassembly tool kit Spindle with puller nut Puller dome for wheel bearing set Disassembly tool kit with basic device

p/n 916 94 70 p/n 614 70 70 p/n 614 70 90 p/n 916 94 75

Disassembly tool kit Hydraulic set 5 pcs Disassembly tool kit with hydraulic

p/n 916 94 70 p/n 802 50 000 p/n 916 94 80

Passenger car wheel hub puller and drive shaft ejector Flange for pulling hubs with 3, 4 and 5 hole divisions, suitable for nearly all passenger car marques with a pitch from 98.0 mm to 139.7 mm. Flange Adapter (2 ¼ x16G to 1½ x16G) Adapter (1½ x16G to M18X1,5) Hydraulic spindle12 tonne Spare wheel screws 15 pcs Spare wheel screws 15 pcs Case empty with burl foam material Hard aerated plastic insert punched out Drive shaft ejector and wheel hub puller

p/n 614 78 50 p/n 614 91 41 p/n 614 87 10 p/n 104 16 50 p/n 614 87 290 p/n 614 87 390 p/n 880 08 50 p/n 880 00 86 p/n 614 79 001

Flange Adapter (2 ¼x16G to 1½ x16G) Adapter (1½ x16G to M18X1,5) Drive shaft ejector and wheel hub puller

p/n 614 78 50 p/n 614 91 41 p/n 614 87 10 p/n 614 68 50

Flange Adapter (2 ¼x16G to 1½ x16G) Cone rings set 5 pcs. Drive shaft ejector and wheel hub puller

p/n 614 78 50 p/n 614 91 41 p/n 614 79 70 p/n 614 68 505

Extract flange with adapters p/n 614 68 50 Mechanical spindle (M18x1,5x210mm) p/n 614 78 60 Cone rings set 5 pcs. p/n 614 79 70 Drive shaft ejector and wheel hub puller (mechanical) p/n 614 78 00 Extract flange with adapters p/n 614 68 50 Hydraulic spindle 12 tonne p/n 104 16 50 Cone rings set 5 pcs p/n 614 79 70 Case empty with burl foam material p/n 880 08 50 Hard aerated plastic insert punched out p/n 880 00 86 Drive shaft ejector and wheel hub puller (hydraulic) p/n 614 79 00 Accessories Extension for the hydraulic spindle for Audi A4, A6, Ford p/n 990 16 50 Slide hammer 5kg p/n 614 87 90 Slide hammer 8kg p/n 614 88 00 Spacer ring universal without screws p/n 614 86 98 Spare wheel screws 5 pcs M 12x1,25 60 mm long with washers p/n 614 87 330 Spare wheel screws 5 pcs M 12x1,5 60 mm long with washers p/n 614 87 340 Spare wheel screws 5 pcs M 14x1,5 60 mm long with washers p/n 614 87 350 Spacer ring complete with 15 screws and washers p/n 614 86 95 Spacer ring with Spare wheel screws for BMW 5 pcs M 12x1,5, 60 mm long with washers p/n 614 86 90 Spacer ring with Spare wheel screws for Volvo 5 pcs M 14x1,5, 60 mm long with washers p/n 614 86 94

D 13

Hub extractor 4, 5, and 6 hole divisions. For ejecting the drive shaft and when used with the slide hammer extracting the wheel hub. The puller can also be used with the 10t hydraulic cylinder p/n 8025110 directly or with the 12t open core hydraulic cylinder*. (*12t adapter and 12t spindle must be present). Type : universal, e.g. Transporter, off road Vehicles, Ford Transit, MB Sprinter, Nissan Interstar / Primastar, Opel Arena, Movano, Renault Trafic / Master, Toyota Hydraulic spindle 12 tonne p/n 104 16 50 Hub extractor without hydraulic spindle 12 tonne p/n 614 86 79 Hub extractor with hydraulic spindle 12 tonne with 5 cone rings and 2 adapters (incl. M 18 x 1,5) p/n 614 86 80 Accessories: Slide hammer 5kg (thread M 18x1,5) Slide hammer 8kg (thread M 18x1,5) 12t spindle 3 pcs for hydraulic open core cylinder* Adapter for hydraulic open core cylinder *

p/n 614 87 90 p/n 614 88 00 p/n 617 60 80 p/n 614 91 47

Wheel hub counter support front axle Counter support for wheel hub ejection. With the counter support installed on the internal knuckle and used with hub puller p/n 614 86 80 the hub is quickly and safely ejected. Type : Opel Movano, Nissan Interstar, Primastar, Renault Master Wheel hub counter support To be used with: Hub extractor with hydraulic spindle 12 tonne

p/n 614 25 90 p/n 614 86 80

Hub bolt extensions for wheel bolts These extensions can be used in connection with extraction flanges p/n 61479001 and p/n 6148680 when expressing the drive shaft or when disassembling wheel hubs. The hub bolts are installed in place of the wheel bolts which are usually too short to allow you to screw the flange on securely. They can also be used as a spacer for protruding wheel hubs. Hub bolt extension passenger car 1 piece for M12x1,25 p/n 614 78 512 Hub bolt extension passenger car 1 piece for M12x1,50 p/n 614 78 513 Hub bolt extension passenger car 1 piece for M14x1,50 p/n 614 78 514 Hub bolt extension passenger car 1 piece for M14x2,00 p/n 614 78 515 Hub bolt extension passenger car 1 piece for M16x1,50 p/n 614 78 516 Shouldered nut M14 for hub bolt extension 1 piece p/n 614 78 519 Hub bolt extension passenger car set complete 25 pcs M12, M14 & M16 for the extractor flanges p/n 614 78 520

D 14

Adapter with spindle for the admission of a hydraulic open core cylinder This adapter is used with ejecting the drive shaft from the hub with a hydraulic open core cylinder. Used in connection with the basic equipment U14 ideally suitable for the replacement of bushes. Hydraulic adapter with spindle

p/n 614 91 55

Slide hammer 8 Kg Can be universally used on M18x1,5 threads. The 8 kg slide hammer provides tremendous traction to the parts to be removed. Slide hammer complete 8 kg with spindle thread M18x1,5 p/n 614 88 00

Slide hammer 5kg Slide weight approx. 5 kg. With safety grasp (thumb protection). For application with our wheel hub pullers, drive shaft retraction nuts or body work tools Slide hammer 5 kg (thread M 18x1,5) Adapter size 2 M 20 x 1,5 to M 18 x1,5

p/n 614 87 90 p/n 613 26 10

Hub grinder 1 & 2 Number of revolutions max. 1500 rpm For the cleaning of the wheel centre and the contact surface (wheel /brake disk to the hub). For application in connection with a drill, portable electric drill or pneumatic drill. Replaceable cleaning disks with Velcro fastening. Long service life of the cleaning disk. Small dust formation contrary to wire brushes etc. because of the open-porous abrasive and cupshaped basic equipment, no flying sparks and a perfect finish. The cleaned contact surface ensures a flat seat for the brake disk and wheel thus maintaining the clearances of the brake disk and getting the genuine torque values. Hub grinder size 1 (Ø 160) mm

p/n 614 95 60

Basic device with 3 cleaning disks Cleaning disks 3 pcs size 1 (Ø 160)

p/n 614 95 65

Hub grinder size 2 (Ø 200) mm

p/n 614 95 70

Basic device with 2 cleaning disks Cleaning disks 3 pcs size 2 (Ø 200)

p/n 614 95 75

D 15

Hub grinder size 3 for wheel studs For the cleaning of the wheel centre and the contact surface (wheel /brake disk to the hub). For application in connection with a drill, portable electric drill or pneumatic drill. Replaceable cleaning disks with Velcro fastening. Long service life of the cleaning disk. Small dust formation contrary to wire brushes etc. because of the open-porous abrasive and cup-shaped basic equipment, no flying sparks and a perfect finish. The cleaned contact surface ensures a flat seat for the brake disk and wheel thus maintaining the clearances of the brake disk and getting the genuine torque values. Type: e.g. Ford, Porsche, Japanese vehicles Hub grinder size 3 (Ø 40/50) mm 2 basic devices with 12 cleaning disks Cleaning disks 5 pcs (Ø 40) Cleaning disks 5 pcs (Ø 50)

p/n 614 95 80 p/n 614 95 85 p/n 614 95 95

Thread cleaning & repair set Special set for cleaning or re-cutting damaged threads at hubs, wheel studs and wheel nuts. The threads are frequently damaged due to rust, contamination and error when applying the wheels. Thus starting torques are falsified and/or the threads destroyed completely while tightening. Type: M12 x 1.25, M12 x 1.5 & M14 x 1.5 thread Threaded tapM12 x 1.25 / M12 x 1.5 / M14 x 1.5 Hexagon threading die M12 x 1.25 / M12 x 1.5 / M14 x 1.5 Die wrench M4 till M12 Core hole drill HSS 6.5mm / 7.5mm Screw pitch gauge, metric, super out M12 / M14 Thread cleaning & repair set 12-tlg. p/n 232 20 10

Prism disk model S 170 x 280 x 4 mm dick Opening max. 69 mm, min. 29 mm For applications where there is little place. Special steel, particularly slim version, similarly to a torsion bar. For work on the workshop press, e.g. for transmissions, axles etc. Type : Universal Prism disk model S

D 16

p/n 615 88 00

Prism disk model R 250 x 200 mm Sizes: a - 43 mm, 60 mm, 75 mm, 80 mm b - 30 mm, 40 mm, 50 mm, 80 mm For the pressing on or extracting of bearings, pinions etc. For use on the bench press Type: Universal Prism disk model R

p/n 615 87 00

Snap ring pliers „NEW“ for wheel hubs PSA Suitable for models up to 2005 and from 2005 The wheel bearing snap ring pliers for Peugeot wheel bearing has been modified, to accommodate models starting from 2005. Our pliers with the p/n 9103300 only fit the models to year of construction 2005, the new pliers fit for all models thus also the model starting from 2005 Snap ring pliers „NEW“

p/n 910 22 00

Spare sickle blade

p/n 910 22 05

Wheel bearing thrust piece set Wheel bearing thrust piece set, 3 piece to remove the snap ring without grab holes on PSA vehicles p/n 910 33 10 Wheel bearing thrust piece set, 4 pieces for PSA with pliers p/n 910 33 25 Wheel bearing thrust piece set, 5 pieces for PSA with pliers and a spare sickle blade p/n 910 33 30

Wheel bearing set UNI Universal tool kit to the disassembly/assembly of wheel hubs and wheel bearings without dismounting the shock struts. Applicable directly on the vehicle. Complete with 2 basic devices, 1 spacer, 9 different disks and 1 pressure spindle with distance adapter and bearing. Type : BMW, Citroen, Fiat, Honda, MB 124+201 rear axle, Opel, Porsche, Seat, Toyota, Volvo, VW Wheel bearing set UNI in a sturdy plastic case

p/n 614 69 30

D 17

Wheel bearing and separation tool kit front axle Transporter PSA Boxer, Jumper, Fiat etc. Extruding disk p/n 614 61 15 Support sleeve p/n 614 61 22 Support disk p/n 614 61 23 Press in disk p/n 614 61 27 Support tube p/n 614 61 28 Press in disk p/n 614 61 29 Thrust piece p/n 614 80 79 Press bolt p/n 614 80 88 Prism disk pair p/n 614 88 45 Wheel bearing and separation tool kit front axle for Transporter PSA Boxer, Jumper, Fiat etc. p/n 614 61 20

Wheel bearing disassembly and assembly tool set 8 pcs for Renault master, OPEL Movano, Nissan Interstar Thrust piece size 2 p/n 614 61 11 Thrust piece size 7 p/n 614 61 16 Thrust piece size 9 p/n 614 61 18 Support-/distance sleeve with exchange stud p/n 614 62 80 Thrust piece size 5R p/n 614 80 79 Press in/out bolt p/n 614 80 88 Support bolt p/n 614 80 91 Prism disk pair p/n 614 88 45 Wheel bearing de and assembly tool set p/n 614 61 95

Support sleeve 4 In addition to existing sets p/n 6146195 and 6146120 is this support sleeve no. 4 used for all new models with a hub diameter of 140 mm with 17â&#x20AC;&#x153; wheels. Type: Peugeot Boxer, Renault Master et al.. Support sleeve 4

p/n 614 61 31

Wheel bearing assembly tool no. A2 front axle Front wheel bearing Type : Audi A3, A4 1,6-1,9 VW Golf IV, Passat from Â´97 Skoda Oktavia Basic device with spindle Distance sleeve A3, Golf IV Retract disk A3, Golf IV Retract disk A3, Golf IV Extract disk A3, Golf IV * Distance sleeve size 5 A4, Passat * Centre disk size 1 A4, Passat * Counter draw disk size 1 A4 , Passat * Retract disk size 8 A4 , Passat * Extract disk size 5 A4 , Passat Wheel bearing assembly tool no. A2 Wheel bearing assembly tool no. A2 supplement without basic device and spindle

D 18

p/n 614 71 00 p/n 614 75 25 p/n 614 74 85 p/n 614 74 95 p/n 614 73 40 p/n 614 72 35 p/n 614 72 38 p/n 614 72 40 p/n 614 72 42 p/n 614 72 45 p/n 614 73 90 p/n 614 73 93

Wheel bearing assembly tool no. 2 front axle Front wheel bearing Type : Audi A4 1,6 – 1,9 VW Passat from `97 Basic device with spindle p/n 614 71 00 Distance sleeve size 5* p/n 614 72 35 Centre disk size 1* p/n 614 72 38 Counter draw disk size 1* p/n 614 72 40 Retract disk size 8* p/n 614 72 42 Extract disk size 5 * p/n 614 72 45 Wheel bearing assembly tool no. 2, p/n 614 72 90 * Wheel bearing assembly tool no. 2a supplement 5 pcs without basic device with spindle p/n 614 72 95

Wheel bearing assembly tool no. 2b front axle Front wheel bearing Type : Audi A4 2,6-2,8L (bearing Ø 82 mm) VW Passat V6 from `97 Distance sleeve size 6 p/n 614 72 33 Retract disk size 9 p/n 614 72 44 Extract size 6 p/n 614 72 46 Wheel bearing assembly tool no. 2b supplement 3 pcs p/n 614 72 85

Wheel bearing assembly tool no. 2a + 2b, without basic device and spindle

p/n 614 72 10

Wheel bearing assembly tool no. 2 + 2b, with basic device with spindle

p/n 614 72 20

Univ. wheel bearing disassembly and assembly tool Universal wheel bearing disassembly and assembly tool p/n 914 69 30

Press wheel bearing bolt Outside Ø: 28 mm Length without thread: 178 mm Thread: M20 x 1.5 Supplement to wheel bearing tool p/n 914 69 30 In connection with the extracting / press in disks for the disassembly/assembly of the wheel bearings on the dismounted shock strut on the press table Press wheel bearing bolt

p/n 614 72 00

D 19

Wheel bearing assembly tool no. 3 front axle Front wheel bearing Type : VW-Transporter T4 Basic device with spindle p/n 614 71 00 * Distance sleeve size 4 p/n 614 76 80 * Counter draw disk size 2 p/n 614 74 48 * Retract disk size 10 p/n 614 74 45 * Extract disk size 7 p/n 614 73 45 Wheel bearing assembly tool no. 3, 5 pcs in a case p/n 614 73 70 * Wheel bearing assembly tool no.3, supplement 4 pcs without basic device and spindle p/n 614 73 80

Wheel bearing assembly tool no. 3b front axle Front wheel bearing Type : VW Sharan, Ford Galaxy, Seat Alhambra 1,9 Diesel, 2,0 and 2,8 V6 Basic device with spindle p/n 614 71 00 *Distance sleeve p/n 614 65 51 *Extract disk p/n 614 65 52 *Retract disk p/n 614 65 53 *Centre disk p/n 614 65 54 Wheel bearing assembly tool no. 3b, 5 pcs in a case p/n 614 65 50 *Wheel bearing assembly tool no. 3b, supplement 4 pcs. without basic device and spindle p/n 614 65 55

Wheel bearing assembly tool no. 12 front axle Front wheel bearing Type : Ford Escort, Mondeo Basic device with spindle p/n 614 71 00 *Distance sleeve size 7 Escort p/n 614 64 71 *Counter draw disk size 7 Escort p/n 614 64 72 *Retract disk size 25 Escort p/n 614 64 73 *Extract disk size 2 Escort p/n 614 73 20 *Distance sleeve size 18 Mondeo p/n 614 64 81 *Retract disk size 26 Mondeo p/n 614 64 82 *Extract disk size 4 Mondeo p/n 614 73 40 Wheel bearing assembly tool no. 12 8-tlg. in a case p/n 614 64 50 *Wheel bearing assembly tool Nr.12 supplement 7 pcs without basic device and spindle p/n 614 64 45

D 20

Wheel bearing assembly tool no. 15 rear axle Rear wheel bearing Type : Ford Focus Basic device with spindle p/n 614 71 00 *Distance sleeve p/n 614 64 71 *Adapter disk p/n 614 64 72 *Retract disk p/n 614 64 10 *Extract disk p/n 614 64 91 Wheel bearing assembly tool no. 15 complete in a case p/n 614 64 90 *Wheel bearing assembly tool no. 15 supplement without basic device and spindle p/n 614 64 95

Wheel bearing assembly tool no. 8 rear axle Rear wheel bearing Type : MB W 201 -124 -129 - 202 - 210 Basic device with spindle p/n 614 71 00 *Distance sleeve size 11 p/n 614 63 81 *Counter draw disk size 4 p/n 614 63 20 *Retract disk size 18 p/n 614 63 30 *Extract disk size 11 p/n 614 63 40 Wheel bearing assembly tool no. 8 complete 5 pcs in a case p/n 614 63 50 *Wheel bearing assembly tool no. 8 supplement without basic device and spindle p/n 614 63 70 Wheel bearing assembly tool supplement 3 pcs p/n 614 63 88 Type : MB W140

Wheel bearing assembly tool no. 17 front axle Front wheel bearing Type : MB A class bearing no. : SKF=BAH 0059. Basic device with spindle p/n 614 71 00 *Extract disk p/n 614 72 46 *Counter draw disk p/n 614 74 10 *Retract disk p/n 614 74 41 *Distance sleeve p/n 614 75 00 Wheel bearing assembly tool no. 17 complete 5 pcs in a case p/n 614 63 60 *Wheel bearing assembly tool no. 17 supplement 4 pcs without basic device and spindle p/n 614 63 90 For disassembly of the hub: Wheel hub puller

p/n 614 77 00

D 21

Wheel bearing assembly tool 11 V front axle Front wheel bearing Type : Peugeot 106 from `95 - 205 - 309 - 405 - 406 Basic device with spindle p/n 614 71 00 Distance sleeve size 15 106 (Ø 79 mm) p/n 614 75 15 Distance sleeve size 10 205 (Ø 74 mm) p/n 614 75 60 Distance sleeve size 17 309 (Ø 73 mm) p/n 614 75 20 Distance sleeve size 14 405, 406 (Ø 77 mm) p/n 614 75 30 Retract counter draw disk size 23 106 p/n 614 77 25 Retract counter draw disk size 28 205, 309 p/n 614 77 30 Retract counter draw disk size 21 405, 406 p/n 614 77 20 Retract disk size 22 106 p/n 614 77 05 Retract disk size 2 205, 309 p/n 614 74 20 Retract disk size 20 205, 309,405, 406 p/n 614 77 10 Extract disk size 13 106 p/n 614 74 05 Retract/extract disk size 1 205, 309 p/n 614 74 10 Retract centre disk size 29 106 p/n 614 77 06 Wheel bearing assembly tool no. 11, 14 pcs in a case p/n 614 62 70 Distance sleeves for pressing out and in, used in combination with the wheel bearing tool or at the press table. Type : Peugeot 205, 309 (Ø 77 mm) p/n 614 75 65 Type : Peugeot 205, 309 (Ø 85 mm) p/n 614 75 75

Wheel bearing assembly tool 5 front axle Front wheel bearing Type : Renault R 5 - 9 - 11, CLIO and R19 with bearing no. 7701462469 and 7701464049 Basic device with spindle p/n 614 71 00 *Distance sleeve size 9 Renault, almost all passenger cars p/n 614 62 55 *Counter draw disk size 3 p/n 614 62 10 *Retract disk size 15 p/n 614 62 30 *Retract disk size 16 p/n 614 62 40 *Extract disk size 8 p/n 614 62 20 Wheel bearing assembly tool no. 5, 6 pcs in a case p/n 614 62 00 *Wheel bearing assembly tool no. 5 supplement without basic device with spindle p/n 614 62 05 Wheel bearing assembly tool no. 5b supplement Type : Renault Laguna, Clio, R 19 Distance sleeve p/n 614 62 60 Retract / Extract disk Ø 82 mm p/n 614 61 70 Retract / Extract disk Ø 72 mm p/n 614 61 75 Wheel bearing assembly tool no. 5b supplement 3 pcs p/n 614 61 80

Distance sleeve model ABS For the disassembly/assembly of the wheel bearings together with the wheel bearing tools. Alternatively the distance sleeve can be used on the press. Type : Renault with ABS et al. (not for the Laguna from `98) Distance sleeve model ABS

D 22

p/n 614 62 65

Distance sleeve model UNI Adjustable distance sleeve with three pairs of top parts used in addition to the wheel bearing tools or for use on the bench press. At the base plate of the distance sleeve the diameter can be adjusted according to the wheel bearing housing. The different top parts are selected depending on the shape of the wheel bearing housing and installed on the distance sleeve. Additionally the top parts can be shifted separately on the guide. Thus the distance sleeve is optimally adjustable to the wheel bearing housing shape. Type : universal Distance sleeve model UNI in a case

p/n 615 87 60

Top parts supplement „TRANSPORTER“ For adjustable distance sleeve The supplement consists of 3 strengthened guides for the 95.0 mm top parts narrow and broad, of which there are 1 pair each in the set. Supplement 7 pcs; 2 pair top parts size 4 and 5 length 95,0mm with 3 strengthened guidance’s p/n 615 87 650 Strengthened guidance 1 piece for top part “long” p/n 615 87 655 Top parts pair broad size 4 long version 95,0 mm p/n 615 87 615 Top parts pair narrow size 5 long version 95,0 mm p/n 615 87 625

Distance sleeve model SUV Basic device with strengthened top parts Distance sleeve model SUV

p/n 615 87 70

Assembly paste anti seize 10 g High performance grease for strongly loaded spindles, e.g. on wheel bearing and bush tools. Temperature-resistant protects against corrosion, seizing and wear. The handy one-way syringe makes a proportioned and clean application possible. Assembly paste anti seize

p/n 816 01 00

D 23

Bearing inner race drawer Precise clamping devices for removal of the inner race wheel bearing remaining on the hub during wheel bearing change. An operational compilation consists of: basic device + spindle + clamping device + thrust piece (with hollow shafts)

Sample applications for the clamping devices: Size 1 Alfa, Audi, Ford, Peugeot, Lancia, Renault, VW Size 2 Alfa, Audi, Ford, Renault Size 3 Citroen, Ford, Opel Vectra B, Renault, VW Golf IV Size 4 BMW, Renault, Peugeot Size 5 Citroën XM, Xantia Size 6 BMW E 39, Safrane, Laguna, Megane, Size 7 Alfa, Fiat Tipo, UNO, Panda, Lancia, VW Polo Size 8 Opel Kadett, Corsa, Astra, Citroen, AX/ZX Size 9 Lancia, Opel Vectra A front axle, Peugeot Size 10L* BMW E32/38, Opel Omega A/B rear axle Long version

Basic device size 1 standard Basic device size 2* Spindle M16 x 1,5 x 100 standard Spindle M16 x 1,5 x 150

p/n 614 80 83 p/n 617 81 41 p/n 614 80 86 p/n 614 80 89

Clamping device Ø -reach Size 1 46-50 Size 2 48-52 Size 3 54-58 Size 4 56-60 Size 5* 58-62 Size 6* 62-66 Size 7 40-44 Size 8 45-49 Size 9 50-54 Size 10L 51-54

basic device size 1 size 1 size 1 size 1 size 2 size 2 size 1 size 1 size 1 size 1

p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 614 80 74 p/n 614 81 44 p/n 614 81 45 p/n 614 80 69 p/n 614 80 81 p/n 614 80 82 p/n 614 80 41

height 15 mm 25 mm 16 mm 15 mm

p/n 614 80 76 p/n 614 80 77 p/n 614 80 78 p/n 614 80 85

Thrust piece Size 1 Size 2 Size 3 Size 4a

D 24

Ø 30 / 21 38 / 21 38 / 21 28 / 21

Bearing inner race puller This set is suitable for 90% wheel bearings available on the market. With this particularly affective puller the wheel bearing inner race, which remains on the hub during the wheel bearing change, is pulled simply and efficiently. Type : Renault Twingo, Clio, Espace, Trafic, Fuego, Safrane, Laguna , Chamade 9, 11, 18, 19, 20, 21, 25, 30, universal Basic device size 1 Collet size 1 Collet size 2 Collet size 3 Collet size 4 Press in ring 1 Press in ring 2 Press in ring 3 Thrust piece size 1 Thrust piece size 2 Thrust piece size 3 Thrust spindle 100 mm In and excursion bolt Bearing inner race puller, set 13 pcs in a case

p/n 614 80 83 p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 614 80 74 p/n 914 10 10 p/n 914 10 20 p/n 914 10 30 p/n 914 10 50 p/n 914 10 60 p/n 914 10 55 p/n 614 80 86 p/n 914 10 70 p/n 914 09 51

Bearing inner race puller Type : Opel Omega Basic device size 1 Collet size 10 Thrust spindle 150 mm Bearing inner race puller, set 3 pcs

p/n 614 80 83 p/n 614 80 41 p/n 614 80 89 p/n 614 80 40

Bearing inner race puller Type : Universal Basic device size 1 Collet size 1 Collet size 2 Collet size 3 Collet size 4 Collet size 7 Thrust piece size 1 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 9 pcs

p/n 614 80 83 p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 614 80 74 p/n 614 80 69 p/n 914 10 50 p/n 914 10 55 p/n 614 80 86 p/n 614 80 45

Bearing inner race puller Type : Audi, Ford, Toyota, VW Basic device size 1 Collet size 1 Collet size 2 Collet size 3 Thrust piece size 1 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 7 pcs in a case

p/n 614 80 83 p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 614 80 76 p/n 614 80 78 p/n 614 80 86 p/n 614 80 55

D 25

Bearing inner race puller Type : Audi A3, Golf Basic device size 1 Collet size 9 Thrust piece size 3 Thrust spindle 100 mm

p/n 614 80 83 p/n 614 80 82 p/n 914 10 55 p/n 614 80 86

Bearing inner race puller, set 4 pcs

p/n 614 80 57

Bearing inner race puller Type : Audi A3, Golf Basic device size 1 Collet size 1 Collet size 7 Thrust piece size 1 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 6 pcs

p/n 614 80 83 p/n 614 80 71 p/n 614 80 69 p/n 914 10 50 p/n 914 10 55 p/n 614 80 86 p/n 614 80 59

Bearing inner race puller Type : VW Basic device size 1 Collet size 9 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 4 pcs

p/n 614 80 83 p/n 614 80 82 p/n 914 10 55 p/n 614 80 86 p/n 614 80 63

Bearing inner race puller Type : Renault, universal Basic device size 1 Collet size 1 Collet size 2 Collet size 3 Collet size 4 Thrust piece size 1 Thrust piece size 2 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 9 pcs

p/n 614 80 83 p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 614 80 74 p/n 914 10 50 p/n 914 10 60 p/n 914 10 55 p/n 614 80 86 p/n 614 80 65

Bearing inner race puller Type : Renault Basic device size 1 Collet size 1 Collet size 2 Collet size 3 Thrust piece size 1 Thrust piece size 2 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 9 pcs

D 26

p/n 614 80 83 p/n 614 80 71 p/n 614 80 72 p/n 614 80 73 p/n 914 10 50 p/n 914 10 60 p/n 914 10 55 p/n 614 80 86 p/n 914 09 50

Bearing inner race puller Type : Opel Basic device size 1 Collet size 8 Collet size 9 Thrust piece size 3 Thrust piece size 4A Thrust spindle 100 mm Bearing inner race puller, set 9 pcs

p/n 614 80 83 p/n 614 80 81 p/n 614 80 82 p/n 914 10 55 p/n 914 80 85 p/n 614 80 86 p/n 614 80 80

Bearing inner race puller Type : Opel Basic device size 1 Collet size 3 Collet size 8 Collet size 10 Thrust piece size 3 Thrust piece size 4A Thrust spindle 150 mm Bearing inner race puller, set 9 pcs

p/n 614 80 83 p/n 614 80 73 p/n 614 80 81 p/n 614 80 41 p/n 914 10 55 p/n 914 80 85 p/n 614 80 89 p/n 614 81 75

Bearing inner race puller Type : Peugeot 106, 205, 306, 309, 405, 406, 806 Basic device size 1 Collet size 4 Collet size 9 Thrust piece size 1 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 6 pcs in a case

p/n 614 80 83 p/n 614 80 74 p/n 614 80 82 p/n 614 80 76 p/n 614 80 78 p/n 614 80 86 p/n 614 80 97

Bearing inner race puller Type : BMW E32, E38, E39 Basic device size 1 Basic device size 2 Collet size 3 Collet size 6 Thrust piece size 3 Thrust spindle 100 mm Bearing inner race puller, set 9 pcs

p/n 614 80 83 p/n 617 81 41 p/n 614 80 73 p/n 614 81 45 p/n 914 10 55 p/n 614 80 86 p/n 614 81 75

Triple arm bearing inner race puller This universal puller has a clamping range from 40,0 to 60.0 mm and is suitable for work, where sufficient place is present for the attachment of the puller. Triple arm bearing inner race puller Clamping range 40-60 mm

p/n 614 80 525

D 27

Bearing race drive out To remove seized bushes ( on commercial vehicles, also rough fork sockets), e.g. for the bushes of the split taper roller bearings in the wheel hubs. Possible to regrind! Type : universal Bearing race drive out passenger cars 300 mm lg. Bearing race drive out commercial vehicles 510 mm long x 24mm hexagon

p/n 616 94 00 p/n 616 94 95

Bearing race assembler commercial vehicles Area of application of 92 mm - 165 mm Ø For tilt-free and central mounting of bushes. Adjust the cheeks to the inside diameter clamp the bush and punch it in. Bearing race assembler commercial vehicles

p/n 616 95 00

Wheel bearing outer race/grease cap driving tool model A For the damage-free and central driving of outer bearing races and the dust/grease caps on the rear axle. Formation of chips when driving is prevented, so that no damage to the wheel bearings is caused. Type : Audi / VW (not all wheel drive) Driving bolt 150 mm lg., M 16 x 1,5 p/n 616 94 51 Driving disk Ø 40 mm p/n 616 94 52 Driving disk Ø 45 mm p/n 616 94 53 Driving disk Ø 50 mm p/n 616 94 54 Driving sleeve dust caps Ø 40 / 45 mm p/n 616 94 35 Wheel bearing outer race/grease cap driving tool model A 5 pcs p/n 616 94 60 in a plastic case

D 28

p/n 614 45 30

Pressure piece set 15 pcs Pressure piece set universal 60 – 85mm, 15 pcs with 3 washers 50 – 130mm Pressure piece set 15 pcs in a case

p/n 614 61 30

Pressure piece set 11 pcs Pressure piece set universal 60 – 85mm, 11 pcs without washers Pressure piece set 11 pcs in a case

p/n 614 61 40

Grease cap driving in tool model F For the damage-free and central driving of the dust/grease caps on the rear axle. Formation of chips is prevented when driving so that no damage to the wheel bearings is caused. Type : Ford Escort, Mondeo, Transit front axle Drive in bolt 150 mm lg., M 16 x 1,5 Drive in sleeve for dust/grease caps Grease cap driving in tool model F 2 pcs .

p/n 616 94 51 p/n 616 94 16 p/n 616 94 15

Grease cap driving in tool model MB For the damage-free and central driving of the dust/grease caps at the front axle wheel bearings Formation of chips is prevented when driving so that no damage to the wheel bearings is caused. . Type : MB all passenger cars Drive in bolt 150 mm lg., M 16 x 1,5 Drive in sleeve Ø 52 / 60mm Grease cap driving in tool model MB 2 pcs .

p/n 616 94 51 p/n 616 94 34 p/n 616 94 40

Socket E22 impact commercial vehicle E-profile E 22 x 100 mm x 3/4" drive For the disassembly and assembly of cylinder head screws. Type: commercial vehicles, e.g. MAN new TGA engines Socket E22 impact

p/n 606 28 22

Axle nut socket Universal socket from 55,0 to 150,0mm Type : commercial vehicles e.g. screwed in grease caps. Screwed in drive shafts etc. Axle nut socket

p/n 915 87 60

D 29

Manual thread cutter commercial vehicles For re-cutting and equalizing damaged threads on the axle stub of commercial vehicles etc.,. Step less adjustment from 25 to 140 mm Ă&#x2DC;. Included are a set of metric and imperial re-threaders Pitch metric : 1,0-1,25-1,5-1,75, 2,0-2,5-3,0-3,5, 4,0 Manual thread cutter commercial vehicles Replacements sets : Re-threading set 3 pcs metric

p/n 276 00 00 p/n 276 00 60

Swing arm clamping screw push out tool For pushing out the upper wishbone clamping screw on Audi A4, A6,VW Passat vehicles from 1997 which have the four swinging arm wheel axle. Swinging arm clamping screw pusher tool

p/n 917 46 30

Swinging arm screw drill-out tool Supplement for accurately drilling the four swinging arm clamping screw. Using the 2 screwed on drilling cases first for predrilling the screw will then be drilled out to the thrust bolt measure. The clamping screw is then drilled out into the casting body. Using the thrust bolt to press centraly on the screw core. The thread is not distorted, which can often prevented the removal from the casting body. Also suitable for removal tools from other manufacturers Release nut 1/2" With this and an impact screwdriver the clamping screw is first â&#x20AC;&#x153;shaken loose". The release nut is then screwed onto the protruding end of the clamping screw Type : Audi A4, A6, VW Passat 97, vehicles with four swinging arm wheel axle. Swinging arm clamping screw drill-out tool p/n 613 40 00 Release nut 1/2" p/n 113 51 00 Swinging arm clamping screw drill-out -/ push out tool in a plastic case p/n 617 46 80

D 30

Hydraulic hand pump model 11 (single acting) Usable tank volume: 655 cm3 Piston displacements: 2.62 cm3 Weight: 5.9 kg Max. lever strength: 50 kg max. Operating pressure: 700bar Overall length: 585 mm , Connection: 3/8" - 18 NPT Economical single-step hand pump with a large tank capacity for single acting cylinders, with a manually operated reverse valve for forward and return. Built in relief valve for overload protection. Recommended for cylinders from 10t Hydraulic hand pump model 11 (single-acting) p/n 802 55 10

Hydraulic hand pump model 22 (double acting) Usable tank volume: 901 cm3 Piston displacement stage I/II: 11,26/2.47 cm3 Weight: 4.1 kg Max. lever strength: 42.2 kg max. Operating pressure: 700bar Overall length: 549 mm Connection: 3/8" - 18 NPT 1. Small weight and compact build 2. Nylon tank and nylon-coated aluminium housing for highest corrosion protection 3. Through double action 78% fewer pump strokes. Recommended if the cylinder must drive out quickly in order to make contact and fix the thrust pieces. 4. Large tank capacity for versatile employment 5. Build in relief valve as overload protection Recommended for cylinders 10t - 20t Hydraulic hand pump model 22 (double acting) p/n 802 55 20

Air hydraulic foot pump 10000 P.S.I. / 700 BAR High performance air powered hydraulic foot pump, an addition to the wheel bearing tool kits, time-saving operation one man operation Air hydraulic foot pump HL-2810

p/n 802 55 65

D 31

Hydraulic high-pressure hose Length 2.20 m Bursting pressure 1.400 bar Max. permissible operating pressure 700bar Connection 3/8" NPT. Suitably for all Pichler hydraulic tools. For high demand with high resistant external layer and spring break protection for increased stability against wear Hose adapter with ball valve for the oil loss-free change of individual components without additional tools. Hydraulic high-pressure hose 2,20 m long Hose adapter with ball valve

p/n 802 53 00 p/n 802 54 00

Hydraulic cylinder 10 t Maximum force: Stroke: Height retracted: Cylinder outside Ø: Oil volume: Operating pressure: Weight:

10 t 156 mm 247 mm 57 mm 226 cm ³ 700 bar 4.4 kg

Cylinder made from high-strength alloyed steel with spring return and substantial bronze guides. Developed for use in all situations. The piston rod for protection against corrosion and wear is chromium plated. With Pichler standard quick-coupler. Employment: e.g. ball joint and silent bush tools. Hydraulic cylinder 10 t

p/n 802 51 10

Hydraulic hollow piston cylinder 12 t Maximum force: Stroke: Overall height retracted: Cylinder outside Ø: Oil volume: Operating pressure: Weight: Hole: External thread:

12 t 42 mm 120 mm 69 mm 75 cm ³ 700 bar 2.8 kg 20,2 mm 2 3/4" – 16

End to end hollow piston for the use with pressure spindles, hauling cables etc. The hollow piston construction makes possible the employment of the cylinder for pushing and pulling work. With strong spring release and Pichler standard quick-coupler. Employment: e.g. wheel bearings, hubs, silent bearing etc. Hydraulic hollow piston cylinder 12 t

D 32

p/n 802 51 00

Hydraulic hollow piston cylinder 20 t Maximum force: 20 t Stroke: 76 mm Overall height retracted: 200 mm Cylinder outside Ă&#x2DC; : 98 mm Oil volume: 150 cmÂł Operating pressure : 700 bar Weight : 8,6 kg Hole : 26,9 mm. The hollow piston construction makes it possible to use the cylinder for pushing and pulling work. With strong spring release and Pichler standard quick-coupler. Stationary employment of two tapped holes in the base and an additional adapter ring are possible Employment: e.g. for all wheel knuckle tool set p/n 614 27 50 and silent bushes on commercial vehicles. Hydraulic hollow piston cylinder p/n 802 51 40 Adapter rings attachment on the cylinder with allen screws Size 2 tool connecting thread M 65 x 2 p/n 614 27 90 Size 3 tool connecting thread M 60 x 1,5 p/n 614 28 00

Hydraulic flat cylinder Model/ Maximum force: Stroke: Height retracted: Cylinder external dimensions: Operating pressure: Weight :

10t 12 mm 42 mm 82 x 55 mm 700 bar 1,4 kg

20t 11 mm 51 mm 101 x 76 mm 700 bar 3,1 kg

Compact, flat version for employment where other cylinders are too large. Mounting holes make simple assembly possible. The grooved piston end makes thrust pieces redundant. With Pichler standard quick-coupler. Employment: e.g. trace and connecting rod head pullers for commercial vehicles Hydraulic flat cylinder 10t Hydraulic flat cylinder 20 t

p/n 802 51 60 p/n 802 51 50

D 33

Hydraulic set 12t For use with different bush and ball joint tools model R also for the wheel bearing tool. Optimal working is ensured by the maximum traction power of 12 t. Replacement of bushes and ball joints is made much easier by the use of hydraulics. Hand pump model 11 Usable tank volume. 655 cm3 Hydraulic high-pressure hose 2,20 m long. Hose adapter with ball valve For the oil loss-free change of hydraulic cylinder. Hydraulic hollow piston cylinder 12 t Stroke: 42 mm Hole : 20,2 mm Wheel bearing spindle 450 mm long, With extraction nut (p/n 6147141) for use with of the hydraulic insert. 1) Hand pump model 11 2) Hydraulic high-pressure hose 2,20 m long. 3) Hose adapter with ball valve 4) Hydraulic hollow piston cylinder 12 t 5) Wheel bearing spindle 450 mm (only model R) Hydraulic set model B 3 pcs. 1, 2, 3 Hydraulic set model S 4 pcs. 1, 2, 3, 4 Hydraulic set model R 5 pcs. 1, 2, 3, 4, 5

p/n 802 55 10 p/n 802 53 00 p/n 802 54 00 p/n 802 51 00 p/n 614 71 40 p/n 802 55 50 p/n 802 49 00 p/n 802 50 00

XZN special sockets Impact sockets with ½ “ drive in short 40.0 mm and long 75.0 mm versions XZN M14, XZN M16 and XZN M18. These are required for the release and tightening of the special screw connections in the chassis and suspension. Manufactured in one part, thus extremely though. XZN special sockets ½“ drive 6 pcs XZN 14,16,18 impact 40,0 mm and 75,0 mm long p/n 794 05 00

D 34

Vacuum extraction pump Pneumatic and manual operation. Includes 3 extraction hoses, container volume is 6.5 litres Can be used for siphoning off most fluids for example, fuels, oils, water, brake fluid and coolants. This pump can be operated both pneumatically or by using the hand pump to produce negative pressure in the 6,5 litres container. With manual use one is independent of power sources or compressed air and thus has substantially more flexibility. The equipment is provided with 3 different suction hoses, which have outside diameters of 5,0 - 7.0 and 10.0 mm. The length of each is approx. 1 meter. Vacuum siphon pump pneumatic and with manual control 6,5 litre with 3 extraction hoses p/n 901 18 00

Pump for extraction and filling Manual operation. With a change over valve for extraction or filling - container volume is 8.8 litres This version be used for extracting most different fluids for example, fuels, oil, water, brake fluid and coolants. By operating the change over valve the mode can be changed from extraction to filling. As operation by hand pump produces negative and/or positive pressure in the 8,8 litres container and is independent from electrical or compressed air sources the unit offers great flexibility of use. This device is equipped with 1 hose and 2 probes for the extracting of engine oil. Hand extracting pump for extracting and filling of liquids, 8,8 litre with 1 hose and 2 probes p/n 901 19 00

Double action pumps extraction and pressure Volumes 125ml and 250ml Robust hand extraction pumps with double stroke. The pumps pump fluid with each movement; therefore there are no â&#x20AC;&#x153;no-load operation â&#x20AC;&#x153;pump strokes. The aluminium housing and plastic parts from which the pumps are manufactured, are suitable for liquids such as diesels, heating oil, engine oil, brake fluid, water and different coolants. ATTENTION these pumps are not to be used for petrol, acids and caustic solutions! Double-acting pump universal 125 ml volume aluminium housing with plastic hoses p/n 80125125 Double-acting pump universal 250 ml volume aluminium housing with plastic hoses p/n 80125250

E 01

Brake service adapter Manufacturer / Type

My.

Adapt.

P/n

ALFA-ROMEO

Manufacturer / Type

My.

Vision

All passenger cars

Adapt.

P/n

61A

8064610

8064200

Viper

03-

8064223

8064270

Voyager LE

96 -

8064223

8064200

Voyager LX 2,5 / SE 2,4

01-

8064223

Voyager SE

94-

22+22/1

8064220

DB7 Vantage

8064200

CITROEN

V12 Vanquish

8064200

2CV, AX, Berlingo, Evasion

8064200

Saxo, Visa, ZX

8064200

54A

8063010

Giulietta

81-86

156 + Sportwagon ASTON MARTIN

AUDI All passenger cars

8064200

BENTLEY All passenger cars BMW All passenger cars

2CV4 dr.brake fr., Ami 6/8 Berlingo

98-

38A

8064380

C2, C3

03-

8064200

01-

8064200

03-

50S

8064505

Motos R60-R100

76-80

8064200

Dyane dr.brake fr.

54A

8063010

Motos R75

73-76

8064200

Jumper

98-

50S

8064505

Jumpy

98-

8064200

03-

38A

8064380

8064200

CADILLAC All passenger cars

61A

8064610

Xara

CTS (DOT3)

01-

61A

8064610

Dacia

32V Northstar

96-

61A

8064610

1210, 1310, 1410

Eldorado

96-

61A

8064610

DAEWOO

Seville SLS

96-

61A

8064610

Espero, Lanos, Nexia

Seville STS

96-

61A

8064610

Evanda

03-

61A

8064610

SRX

03-

61A

8064610

Kalos

03-

8064200

XLR

03-

61A

8064610

Lacetti

03-

8064200

Leganza

99-

8064450

CHEVROLET Alero, Blazer, Camaro,Trans Sport Astro-Van, Surburban, Tahoe Blazer, S10 Pick-Up 2WD + 4WD Corvette Trail Blazer

99-

61A

8064610

Matiz + ABS

99-

8064350

96-

8064120

Nubira

99-

8064200

96-

8064130

Nubira

01-

61A

8064610

96-

61A

8064610

Rezzo CDX

01-

8064270

01-

61A

8064610

DAF 98-

38A

8064380

CHRYSLER All passenger cars

65-85CF Series 88-

cast-iron packaging

22+22/1

8064220

Type 45

8064200

8064130

V 400

8064710

8064790

300 M 2.7 Executive

99-

8064770

DAIHATSU

Grand Voyager

99-

8064770

Applause

Grand Voyager

02-

8064223

Applause A101, Charade G200

95-

8064730

Crossfire

03-

8064200

Charade

89-

8064790

8064150

Charmant

89-

54A

8063010

Jeep

99-

Jeep Cherokee Jeep Cherokee / Grand Cherokee Jeep Wrangler

-95

8064770

Copen

03-

8064820

96-

8064223

Cuore

89-

8064790

96-

22+22/1

8064220

Cuore

91-

8064790

Jeep Wrangler Sport

99-

8064223

Cuore

98-99

8064850

Jeep Wrangler

03-

8064223

Cuore

01-

8064850

Neon LE 1,6

01-

8064223

Cuore / Charade

-89

54A

8063010

Stratus

99-

8064770

Move, Sirion (M101), YRV (M201)

01-

8064850

E 02

Brake service adapter Manufacturer / Type

My.

Move (L901) Gran Move, Move

99-

Gran Move (G301)

Adapt.

P/n

My.

Adapt.

P/n

54A

8063010

Ranger

Manufacturer / Type

99-

8064490

8064730

Transit Van

98-

8064200

55A

8063020

Transit Van

81-

27+52

8064270

Hijet 4WD / Sta.Wag.

89-

8064730

Transit Van

71-

8064710

Hijet S 86, Rocky Mod. F75/78

95-

8064730

Truck series 813-815, Cargo

8064560

8064730

Truck Series N

98-

8064730

Windstar

Rocky EL 4WD / EX 4WD Sirion

54A

8063010

Sirion (100, M101, M111)

03-

8064820

Cars with ITT ABS MkIV

Terios

97-

8064790

HONDA

Sirion (M100, M101)

96-

8064680

77A

8064775

61A

8064610

Terios (J102)

8064790

Accord

85-92

8064800

YRV (M201)

54A

8063010

Accord

96-

8064800

8064850

Accord

01-

8064860

Accord

03-

8064860

8064200

Civic

92-

8064810

Civic

96-

8064810

YRV (M201)

01-

FERRARI All passenger cars FIAT All passenger cars, Palio

8064200

Civic

126, Argenta, Cinque-/ Seicento

8064760

Civic + Accord + Prelude

8064200

Fiorino

98-

Daily 45,0 Ø, 127

01-

8064860

76-83

8064470

Civic (EJ 9), HR-V, Insight, Logo

99-

8064810

99-

8064270

Odyssey (US-Minivan), S 2000

Multipla

00-

8064270

Concerto, CRV

Panda

03-

8064200

CRX 1,6, Civic Shuttle

Daily 26,5 Ø

8064810

54A

8063010

8064710

CRX 1,6

97-

8064810

Bachetta Coupe

98-

8064760

CRV

03-

8064860

Ducato

98-

50S

8064505

Jazz

03-

8064860

Marea

98-

8064200

Legend

91-

8064810

Doblo

01-

8064200

Legend V6 2,7

38A

8064380

Punto + ABS

96-

8064760

Motorcycles 250-1000cm³

8064480

Punto

03-

8064200

NSX-T (1981- =DOT3)

99-

8064800

Scudo

98-

8064800

Stilo Ulysee

03-

X 1/9 Bertone

8064200

Prelude

91-

8064200

Prelude

92-

8064810

50S

8064505

Prelude 2,0

55A

8063020

8064200

S 2000, Stream

01-

8064860

Shuttle

97-

8064800

95-

8064770

FORD All passenger cars

8064200

HYUNDAI

Continental ABS (USA)

8064180

8064200

Cougar

99-

Courier

95-

Econovan Escort

96-

Explorer Fiesta

96-

Focus

8064200

Accent, Lantra II, Pony, Sonata Lantra, Matrix, Pony, Sonata, Terracan, XG 30/XG350 Atos, Centenial, Coupe

99-

8064770

8064170

Elantra, H-1, Santa Fe

01-

8064770

8064200

Getz,

03-

77A

8064775

8064770

H-1 SRAREX

98-

8064770

8064200

H100

14A

8064140

8064200

H100

96-

8064630

01-

77A

8064775

89-

8064820

Galaxy

95-

8064200

Trajet

Galaxy

03-

20S

8064205

ISUZU

8064200

Frontera, Monterey, Trooper

Ka Maverick + Ranger

96-

8064770

Gemini

8064730

Mondeo

96-

8064200

Midi

8064240

Navigator (USA)

01-

8064770

NPR 65+69, NQR 70

98-

8064430

Probe

-92

8064720

Trooper

-89

54A

8063010

Probe

93-

8064200

E 03

Brake service adapter Manufacturer / Type

My.

Adapt.

P/n

IVECO

Manufacturer / Type

My.

Adapt.

P/n

LAND ROVER

Daily-Turbo 59-12, 35-10, 49-12, 35-12, 30-8, Daily 30.8-35.8

8064200

Land-Rover Defender

99-

8064200

Euro-Cargo 60 E10,E12,E14

8064370

Land-Rover Discovery

95-

8064200

Euro-Cargo 65 E10,E12,E14

8064370

Land-Rover Discovery XS

01-

8064280

Euro-Cargo 75 E12,E14,E15

8064370

Land-Rover Freelander

99-

8064280

Euro-Cargo 80 E15,E18,E21 Euro-Cargo 100 E15,E18, E21 Series M 155.14-175.24 MK 75.9 Types 30.8-49.10 / 80.13Zeta 50.9 109.14

8064370

Land-Rover Freelander + Sport

01-

8064200

8064370

Range-Rover / Vogue / EFI

8064200

Range-Rover 4.6 HSE

99-

8064200

LEXUS

8064320

GS 300,430, LS400, 430

95-

8064310

IS 200

99-

8064310

01-

8064310

98-

8064270

8064520

JAGUAR Jaguar Daimler Super V8

8064200

RX 300, S 300, SC 430

Jaguar S-Type R

03-

8064200

LDV

Jaguar S-Type V8

99-

8064770

Convoy

8064200

MASERATI

8064570

3200 GT, Quattroporte

99-

8064200

38A

8064380

Spyder Cambiocorsa

01-

50S

8064505

8064570

MAZDA

99-

8064200

121

95-

8064770

54A

8063010

Besta

97-

8064170

2/3

03-

8064200

Carens

99-

8064770

323

91-

8064490

Carens, Magentis

01-

8064770

323 C + F, 626

95-

Carnival

99-

8064170

323 LXD / GLX, B2500

Clarus

97-

8064200

323 P1.5 Luxury / S1.5 Exclusive

Jaguar Sovereign 4.0 Jaguar X-Type

01-

Jaguar XJ 12 Series III Jaguar XJ 40 + XJ6 Jaguar XJ 6 Series III + XJS Jaguar XJR / XKR KIA

121 LX / 626 LX / GLX

Joice

8064490

99-

8064490

8064770

6, RX 8

03-

61A

8064610

Opius

03-

8064200

626

01-

8064490

Pride

95-

55A

8063020

626 GD

91-

8064720

Rio

00-

55A

8063020

626 GE

92-

8064490

Rio

03-

8064770

626 Break

98-

8064490

Sephia, Sportage

95-

8064200

929

86-

8064490

Shuma

00-

8064200

B series 2.5L TD

99-

8064200

Sorento

03-

8064200

B series 2.5L TD

01-

8064490

B2500 Pickup 4WD

98-

8064200

98-

55A

8063020

8064170

LADA All passenger cars 2100 Speed

89-

Niva-4x4, Nova

8064270

Demio

8064270

E2000 + E2200 mini van

8064270

E2200 Transporter

98-

Samara, 1.3, 1100, 1500

89-

8064270

Luxus / LX + Sport

54A

8063010

Samara Happy Eco

97-

8064270

MPV

-98

8064490

8064270

MPV, MX-5

99-

8064770

Type 2110, 2111, 2112

38A

8064380

MPV

01-

61A

8064610

Type 110, 111, 112 GLI

8064270

MX-5

-94

8064490

MX-5

95-98

8064720

01-

55A

8063020

Type 2101, 2104, 2105, 2107

LANCIA All passenger cars

8064200

MX-5

A 112

8064760

MX-3, MX-6, Xedos, RX7-Turbo

8064200

Premacy

Lybra

01-

Thema

8064490

61A

8064610

8064270

Tribute

01-

8064770

Thesis

01-

8064200

Xedos-6, Xedos-9

95-

8064490

Type K / Y

96-

8064200

E 04

Brake service adapter Manufacturer / Type

My.

Adapt.

P/n

Manufacturer / Type

My.

Bluebird 2,0 SLX / Hatchback

Adapt.

P/n

55A

8063020 8064770

All passenger cars

8064200

Maxima QX, Micra

95-

230 Mot. and G model

8064270

Micra, Sunny, Primera, Serena

93-

8064770

207 / 209 / 310 / 609 Van ACTROS / ATEGO with HPS see E brake bleeder G 60 MB Sprinter, Unimog 2 x 38A) w.

8064200

Micra GL + LX, Patrol Turbo D

54A

8063010

8064405

Micra

03-

8064200

38A

8064380

Patrol GR TD6

99-

8064770

Twin hose

38c

8064990

Pick Up

55A

8063020

8064770

MITSUBISHI Canter

96-

Canter 35, 60, 75

Pick Up, X-Trail

0195-

8064690

Primera, Serena, Vanette Cargo

8064190

Sherry 89-

Carisma

95-

8064340

Carisma hatchback / sedan

99-

8064370

Sunny GTI Sunny SLX / Coupe SLX + 1,3 LX Terrano

Colt 1300 Cl / CLXi, Eclipse

8064770

8064450

54A

8063010

54A

8063010

89-92

8064450

Cordia, Tredia, Starion, Colt

78-84

8064370

Terrano

93-

55A

8063020

Galant

00-

8064410

Terrano II

99-

8064770

8064370

Urvan

11A

8064110

Galant D Galant GTI / GLSI+ Break, L200 L200

-87

8064410

OPEL

8064370

All passenger cars

8064200

98-

8064410

Agila

38A

8064380

Galopper

99-

8064770

Arena

98-

38A

8064380

L300 Minibus

88-

14A

8064140

Astra

99-

8064200

L400

98-

62A

8064625

Campo, Frontera, Monterey

8064820

Lancer

85-

8064410

Movano

98-

8064200

8064370

OPC Turbo

03-

38A

8064380

8064210

61A

8064610

Galant 1800 GLS Kat.

Lancer, Sapporo 2400 Lancer

03-

8064770

Outlander

03-

8064770

Kadett C, Ascona B, Manta B, Rekord D Sintra

Pajero

-87

8064410

Vivaro

Pajero

88-

8064410

Zafira

Pajero, Space Wagon

90-

8064370

PEUGEOT

Pajero 3,2

01-

8064770

Pajero Sport

99-

8064410

Pinin, Santamo,

Sigma

03-

8064200

38A

8064380

All passenger cars

8064200

Boxer

38A

8064380

8064770

Expert, Partner, Type 307

8064200

8064410

Type 204, 504

8064730

73A

8064735

Space Gear Space Runner, Space Wagon (GDI) Space Star

95-

62A

8064625

Type 304 S

99-

8064770

Type 806

96-

8064200

99-

8064340

Type 807

03-

50S

8064505

Space Star

00-

8064370

PONTIAC

Space Wagon

84-89

8064410

Firebird + Cabrio, Trans Sport

61A

8064610

Station Wagon

03-

8064770

PORSCHE

8064200

MOSKVICH 2140 / 2141

NISSAN

All passenger cars

77-

8064200

All passenger cars

-76

8064270

Carrera 2 * Close the ventilation line with a clamp, remove the clamp after bleeding!

`89-

100 NX

93-

8064770

PROTON

200 NX

93-

55A

8063020

99-

8064410

200 SX, Almera

95-

8064770

315 GLSI, 415 GLSI 316 GLSI, 318 GLSI, 413 GLSI, 416 GLSI

99-

8064370

55A

8063020

415 GLI

95-

8064370

03-

8064770

Carmony Plus

97-

8064370

200 SX - Turbo Maxima 3,0 350 Z

E 05

Brake service adapter Manufacturer / Type

My.

Adapt.

P/n

Manufacturer / Type

My.

Adapt.

P/n

All passenger cars

8064200

Impreza 1,8GL, Sedan 1800 4WD Impreza 4WD

98-

8064770

Avantime

8064200

Impreza WRX

01-

8064770

B 120.50

8064200

Justy

95-

8064370

Bus FR1/GTX, FR1E, R312

8064200

Justy

03-

8064200

Legacy

95-

8064780

38A

8064380

Legacy Sedan 1800 / 2200

RENAULT

Clio, Twingo

95-

Espace, Traffic

8064410

8064780

Kangoo

98-

8064200

Libero

93-

8064770

Laguna

95-

8064200

Libero E10 + E12 mini van

88-

8064350

Master

98-

8064200

Outback

89-

8064770

Megane

96-

8064200

Turismo

83-

8064450

8064200

SUZUKI

38A

8064380

Alto

96-

8064830

S 120.08 Midliner, S 140.09, S 160.08 / 09 Midliner, Tracer

8064200

Alto GA / GL

-89

8064450

Velsatis

8064200

Baleno

96-

M 200.13, M 230.13 Scenic

03-

ROVER

und

8064420

8064490

200, MG F-Steptronic, MG IVVC

99-

8064280

Baleno 1.6 GLX +special

99-

8064180

200 / 214 / 800

95-

8064280

Baleno Holiday

99-

8064770

25, MG ZR 160

8064280

Baleno m. ABS +1.3 GS + GL

96-

8064770

400, 420, 600, 45, MG ZS 180

8064800

Carry Family

89-

8064350

8064200

Ignis + Sport

01-

8064350

38A

8064380

Ignis

03-

8064200

75 + Tourer, Mini Cooper

99-

800 / 820 / 825 / 827 Maestro, Metro MG / HL / HLE, Montego Mini + 1300 Special

8064200

Jimny, Vitara + Grand

99-

8064600

-88

8064650

JLX

96-

8064600

Mini Spezial

88-

8064200

Liana

01-

SAAB

Maruti

All passenger cars

8064200

Alhambra

03-

20S

8064205

88-

8064460

Samurai

93-

8064200

Samurai Van

89-

55A

8063020

Samurai Van + Pick Up

99-

8064200

SJ Samurai + SJ 413

85-

55A

8063020

Swift

96-

8064410

8064200

Swift 1,0 GA / 1,3 GL

-89

8064470

SKODA All passenger cars

8064420 8064350

SA 310 + SA 413

SEAT All passenger cars

42 35

Felicia, Octavia, Super B

8064200

Swift 13 + SF 413 / SF 310

89-

8064600

120 L, 135 L Favorit

8064390

Vitara

89-

54A

8063010

Vitara

91-

8064600

SSANG YOUNG Korando, Musso

61A

8064610

Vitara + Grand + 2.0

99-

8064600

Musso E32

01-

8064770

Vitara + Grand + XL7

01-

8064770

Korando

03-

8064770

Wagon R+

99-

8064830

8064770

Wagon R+

03-

8064200

4-Runner

96-

8064310

Avensis

98-

8064200

Avensis Verso

03-

31A

8064315

Rexton STEYR

TOYOTA

Tractors

64A

8064640

SUBARU Coupe 1800, Station Wagon 1800, Super Justy

88-

8064410

Forester, Legacy +combi

99-

8064770

Forester

00-

8064770

E 06

Brake service adapter Manufacturer / Type Camry, Carina, Corolla

My.

Adapt.

P/n

93-

8064310

VOLVO

8064700

Camry, Carina II / 2,0 GLI / 16V Celica 4 WD / GT 2,0 / GT 1600

Manufacturer / Type

My.

Adapt.

P/n

FL 608, FL 611

8064150

8064470

FLC 6 series 7,5 - 12t

8064170

Celica GT 2,0 / GT 1600

01-

8064310

S 40 / V 40

-02

8064340

Celica CS

03-

8064310

S 40

03-

8064200

8064700

S 60

01-

8064200

Corolla, Starlet, Tercel Corolla, Hiace, RAV 4

96-

8064470

S 70 / V 70

8064200

Corolla

01-

31A

8064315

S 80

03-

8064200

Corolla

03-

8064200

XC 90

03-

8064200

8064310

77-81

8064460

Crown

85-

55A

8063020

All passenger cars

EAV-4

03-

8064310

1500/1500 Type 1/ 1600 Type 3

16A

8064160

411 / 412 Type 2 (Diam.28)

8064470

Beetle

98-02

38A

8064380

8064460

Beetle

03-

20S

8064205

8064310

LT 28, 31, 35

64A

8064640

50S

8064505

8064200

Corolla E11, Landcruiser HJ100, Yaris Cressida

Hiace mini van, Liteace, Previa Hilux Landcruiser

-88

8064200

64A

8064640

64A

8064640

Landcruiser

03-

MR-2

03-

8064310

Lupo

Picnic

99-

31A

8064315

Multivan

03-

Prius

01-

8064310

Sharan

-02

8064200

Verso

99-

8064310

Sharan

03-

20S

8064205

8064200

94-

Yaris (special model)

Taro

8064200

8064470

Adapt.

P/n

8064200

Clutch service adapter Manufacturer / Type

My.

Adapt.

P/n

Manufacturer / Type

My.

FIAT ALFA-ROMEO Giulietta

All passenger cars + X 1/9 81-86

38A

8064380

8064200

ASTON MARTIN DB7 Vantage CHRYSLER

FORD Maverick + Ranger

96-

8064430

Ranger

99-

8064200

HONDA

Neon LE 1,6

01-

8064200

Civic, Stream

01-

8064170

Jeep Wrangler

03-

8064200

Accord

01-

8064270

PT Cruiser

01-

8064200

Accord, Civic

96-

8064310

Voyager LX 2,5 / SE 2,4

01-

8064310

Accord

03-

8064170

CRV

03-

8064170

DAEWOO Rezzo CDX

01-

Espero / Nexia

8064270

Civic (EJ 9), HR-V, S 2000, NSX-T (1981-=DOT3)

99-

8064470

8064670

CRX 1,6

97-

8064470

Jazz

03-

8064170

DAF 45 Serie= 150/160/180/210

98-

38A

8064380

HYUNDAI

95+F Serie

98-

38A

8064380

Accent, Lantra II, Pony,Sonata

95-

8064430

Elantra

01-

8064430

DAIHATSU Terios (J102)

8064310

Terracan

E 07

Clutch service adapter Manufacturer / Type

My.

Adapt.

P/n

ISUZU

Manufacturer / Type

My.

Adapt.

P/n

99-

8064430

All passenger cars

8064290

G, R, series AE,

8064290

M 200 / 230.13

8064290

S 120.08 Midliner, S 140.09

8064290

S 160.08, S 160.09 Midliner

8064290

Bus FR1/GTX, FR1E, R312, Tracer

8064200

Metro MG / HL / HLE

8064200

420 / 600

8064310

PROTON 316 / 318 / 416 GLSI

Frontera, Monterey, Trooper

89-

8064670

IVECO Mod. Euro-Cargo

8064200

KIA Magentis

01-

8064430

LADA Niva-4x4, Nova

8064760

8064310

LEXUS IS 200

ROVER 99-

LAND ROVER Land-Rover Discovery

RENAULT

95-

8064200

Mini + 1300 Special

-88

8064710

Mini Cooper

99-

8064710

Mini special

88-

8064710

98-

8064200

SCANIA

MX-5

95-98

8064200

Mod.93 / 13 / 143 / P / R /T

8064200

MX-5

01-

8064490

SSANG YOUNG 45

8064450

Range-Rover Vogue / EFI MAZDA B2500 PickUp 4WD

Korando, Musso

Von Type 1814 LKW G model

38A

8064380

SUBARU

8064270

Forester

00-

8064350

Impreza WRX

01-

8064350

MITSUBISHI Carisma Hatchback, Galopper, Pajero Sport Colt CLXi, Eclipse, Pinin, Santamo Galant GTI / GLSI+combi Lancer (all) L 200 Pajero, Space Wagon

99-

8064430

Legacy +Kombi

99-

8064350

8064430

Outback

89-

8064350

8064430

SUZUKI

98-

8064430

Liana, Vitara + Grand

01-

8064430

90-

8064430

Vitara + Grand , Jimny

99-

8064430

Galant

00-

8064840

TOYOTA

Pajero 3,2

01-

8064840

Avensis

NISSAN

8064310

Corolla E11

98-

8064310

Maxima QX, Vanette Cargo

95-

8064430

Camry, Carina II / 2,0 GLI /16V

8064470

Patrol GR TD6, Terrano II

99-

8064430

Celica 4WD, Celica GT 2,0 / GT 1600, Corolla, Starlet, Tercel, Hilux, Landcruiser

8064470

8064430

RAV 4

8064470

8064430

VOLVO

8064450

Busses B 12 + B 10 B

8064170

8064430

FH 12 series from 12t

8064170

FL 7 / 10 / 12 + series FM

8064170

Pick Up Sunny GTI

89-

Patrol Turbo D 350 Z

03-

OPEL

96-

Sintra

8064200

FLC 6 series 7,5 - 12t

8064170

Campo, Frontera, Monterey

8064260

FL 608, FL 611

8064200

8064670

VW 47

8064470

Agila (bleed from the bottom to the top!)

Taro

E 08

Brake fluid tester model 1 Brake fluid: DOT 4 Measurement: % water content Measures: 100 x 60 x 30 mm Display: LED Probe: 52 mm long. Electronic brake fluid tester with keypad for the fast examination of the water content of brake fluid. Brake fluid tester model 1

p/n 422 40 00

Brake fluid tester model EBT 03 Electronic brake fluid tester for different kinds of brake fluid such as DOT 3, DOT 4, DOT 4 plus and DOT 5.1. The device is menu led and shows the measurement results in the form of the boiling temperature (in °C) and the water content (in %). Supplied in a cardboard box. Characteristics: • processor-controlled • with two-line, alphanumeric display • automatic measuring start when immersing the sensor • Low battery notification • automatic shut off of the equipment after 2 minutes without measurement • Voltage supply over 9 V battery. Brake fluid tester model EBT 03

p/n 422 35 00

Brake flaring tool model M For pipes 4,75 mm of copper, steel or aluminium with up to 1,0 mm wall thickness. For SAE and DIN single and double flange. Handy mechanical flaring tool that can be used on the vehicle. This compact tool can be used in restricted work areas, e.g. at the rear axle. The few individual parts can be installed simply, thus the flaring tool is fast and ready to use. The full set contains a deburring device, a pipe cutter and bending device. Brake flaring tool model M complete

p/n 613 32 14

Brake flaring tool model p/n 613 32 13 without deburring device, a pipe cutter and bending device

E 09

Brake bleeder spanner 11 mm For the manipulation of the hard to reach bleeder screws at the rear axle without the need for disassembly/assembly of the rear wheels. The silicone hose is placed over the breather nipple before setting the spanners. Thus an absolutely leak free operation is ensured. Model 1 29 mm height Type: Passat, Audi A4, etc.

p/n 613 44 55

Model 2 75 mm height p/n 613 44 65 Type: Golf V, Audi A3, Seat Altea, Skoda Octavia new

Brake calliper bleeder valve boring set model uni For drilling out torn off bleeder valves. The valve is drilled out completely with thread and replaced by a threaded bush with new bleeder valve. Type:

Universal e.g. Audi, VW, Opel brake calliper

Core drill, cylindrical p/n 935 30 11 Tap HSSG NPT ¼"x 18 p/n 935 30 14 Tap HSSG NPT 1/8"x 27 p/n 935 30 18 HSS counter sink 3 flutes 90° p/n 935 30 20 HSS-Co drill 6,0 mm p/n 935 30 16 Special drill 2 pcs 8,5mm p/n 935 30 13 Tread sealant p/n 935 30 08 Bleeder valves 2 pcs (1/4" und 1/8" NPT) p/n 935 30 05 Brake calliper bleeder valve boring set model uni, 12 pcs. p/n 935 30 10 Bleeder valves: 5 x NPT 1/4" (big) 5 x NPT 1/8" (small)

p/n 935 30 06 p/n 935 30 07

Brake calliper wire brush model K 1 Total length 225 mm, Setting height 22 mm, steal wire, smooth 0,35 mm Ø With a narrow setting. For cleaning the brake callipers and/or brake lines. Brake calliper wire brush model K1

p/n 613 96 00

Brake calliper file model narrow Brake calliper file complete with grip, narrow version for Japanese vehicles. Brake calliper file model narrow

E 10

p/n 613 85 05

Calliper wind back tool

3/8" � drive, in a case Special tool kit for winding back brake pads at disc brakes on most available passenger cars. Contents: 2 basic devices (size 1 and size 3L with anti clockwise thread e.g. Ford Mondeo, Fiat), basic device body 2 Ø 38 (to be used with the spindle of basic device size 1) and 15 different inserts. Type : Universal Calliper wind back tool, 20 pcs.

p/n 613 87 25

Calliper wind back tool N/O/R Type : Nissan Primastar / Interstar, Opel Vivaro / Movano Renault Kangoo 4wd, new Traffic / Master Calliper wind back tool N/O/R, 5 pcs p/n 613 87 75 Calliper wind back tool Audi/VW 7 pcs p/n 613 87 55 Calliper wind back tool Opel 8 pcs (except Opel Vivaro/Movano) p/n 613 87 72 Opel Vivaro/Movano supplement 3 pcs to p/n 613 87 72 p/n 613 87 76 Calliper wind back tool Ford 10 pcs p/n 613 87 80 Calliper wind back tool Ford 11 pcs p/n 613 87 85 Calliper wind back tool universal 9 pcs p/n 613 88 00

Calliper wind back tool Mechanical wind back tool for different brake calliper versions in the front and rear brakes. Calliper wind back tool

p/n 913 87 25

Calliper wind back tool model 4 For Brembo brake systems Type : Renault Calliper wind back tool model 4

p/n 613 97 00

Calliper wind back tool model 5 For pressing back the brake pistons of Girling brake callipers’ with integrated emergency brake (automatic adjustment). Turning and pressing back in one step, includes a counter plate. Type : Renault Espace, Safrane, R19 Calliper pressing back tool model 5

p/n 613 97 50

E 11

Brake disk raised Torx sockets set 3/8â&#x20AC;&#x153;drive Raised Torx sockets in the sizes T-40, T-45, T50 Type : Ford und GM Brake disk raised Torx sockets set

p/n 913 48 00

Brake disk extractor model F For extracting front brake disks. Using the 12t hydraulic cylinder extremely seized brake disks can be dismantled safely and quickly. Type : Ford Mondeo `96-00 (except V6) Brake disk extractor model F without hydraulics Thrust piece for 12t. hydr. spindle 12t hydraulic spindle Brake disk extractor model F complete incl. hydraulic spindle

p/n 613 96 65 p/n 613 96 66 p/n 104 16 500 p/n 613 96 60

Brake disk and drum extractor Span width ca. 520 mm, span depth ca. 115 mm, Thread 2 Âź" x 16 For extracting the front brake disks of the Mondeo and the rear brake drums of the Transit. Two solid arms with broad puller hooks give the puller a safe hold and distribute the pressure evenly on the brake disk/drum. Using a hand pump and 12t hollow piston cylinders the extremely seized brake disks can be dismantled safely and quickly. The hydraulic components are also used in conjunction with our wheel bearing and certain bush tools. The puller can also be used with the 10t hydraulic cylinder p/n 802 51 10 Type: Brake disks front Ford Mondeo `96-00 Brake drums rear Ford Transit from `00 Brake disk and drum extractor p/n 613 37 61 Adapter for 12t. hydr. cylinder p/n 614 91 90 Adapter size 1 1 1/2" x 16. p/n 614 91 41 12t hydr. open core cylinder stroke 42 mm p/n 802 51 00 Hydraulic hose ca. 2,20 m p/n 802 53 00 Hose adapter with ball valve p/n 802 54 00 Hand pump model 11 p/n 802 55 10 Brake disk and drum extractor with 12t hydr. components p/n 613 37 55

E 12

Brake calliper guidance thread repair set M9 x 1,25 For repairing the guide pin threads in the wheel bearing housing. With disassembly of the guide pins while changing the brake pads the internal threads are frequently destroyed. The defective threads are repaired professionally and quickly with a heavy duty rustproof high-grade steel threaded bush. Type: VAG, Opel, Ford Drill jig UNI complete with 3 inserts p/n 913 44 11 Drill jig insert size 2 VAG p/n 913 44 12 Drill jig insert size 3 OPEL p/n 913 44 13 Drill jig insert size 4 FORD p/n 913 44 14 Replacement bushes with copper ring M 9x1.25 (packing unit 10 pcs) p/n 613 44 10 Special core drill p/n 613 44 08 Special tap M9x1.25 p/n 613 44 09 Tread repair kit M9x1,25 brake calliper guidance bolds complete with UNI drill jig p/n 913 44 20 Alternative: Repair kit with a rigid rather than universal drilling jig Brake calliper guidance thread repair set model V for VAG p/n 613 44 15 Brake calliper guidance thread repair set model O for Opel p/n 613 44 20 Brake calliper guidance thread repair set model F for Ford p/n 613 44 30

Brake spring tool With clamping screw For easy hooking up of the brake springs. Brake spring tool

p/n 913 32 80

Reamer for ABS sensor model 4 Kopf-Ă&#x2DC; 10 mm To drill out the defective abs sensor and for reaming and cleaning the locating hole in the wheel bearing housing. The tool permits a damage-free drilling out of the old sensor and provides a clean and correct seat for the new sensor. Because of the integrated fine-interlocked ratchet a clockwise rotation only is possible. Type: VW Golf V, Polo new , T5, Skoda Fabia, Seat Ibiza Reamer for ABS sensor model 4

p/n 613 10 400

E 13

Reamer for abs sensor Length: 180 mm To clean the locating hole of the abs sensor in the wheel bearing housing of rust. Damage to the new sensor during assembly is avoided. Because of the integrated fine-interlocked ratchet a clockwise rotation only is possible. Model 1 Head Ø : 18 mm, head height : 28 mm Type : e.g. Audi/VW, BMW E36/46, Seat, Skoda Model 2 Head Ø : 18 mm, head height: 34 mm Type : e.g. Audi/VW, Seat, Skoda, commercial vehicles Model 3 Head Ø : 15 mm, head height: 28 mm Type : e.g. MB A class, Mazda, Ford Reamer for abs sensor model 1 Reamer for abs sensor model 2 Reamer for abs sensor model 3

p/n 613 10 00 p/n 613 10 50 p/n 613 10 60

Brake disk slide gauge size 1 Measuring range: 0 - 60 mm Bill length: 85 mm Reading: 1/10 mm

size 2 0 - 90 mm 120 mm 1/10 mm

To determine wear on brake disks. With divided measuring carriage. Thereby once the thickness of the brake disk is measured, the calliper gauge can be taken of the brake disk, otherwise the measure would be adjusted. Brake disk slide gauge size 1 Brake disk slide gauge size 2

p/n 402 20 00 p/n 402 20 05

Rim puller for commercial vehicles Overall length: 1740 mm Draw hook width: 33 mm Supporting surface: 145 x 40 mm Strong version with double-walled steel tube for the loosening of caked-on wheels. The long assembly lever ensures superior torque. With a tilting assembly head this tool is also suitable for dual tires. Rim puller

E 14

p/n 105 95 50

Torque staff These torque staffs make it possible to have controlled tightening of the wheel bolts (+ 7%). By using an automatic tightening stop they can prevent damage to threads and rims. Warning: Do not use the torque staffs by hand or for releasing wheel nuts. Follow the torque values of the motor vehicle manufacturers. A final check with the torque wrench must take place.

Size 17 17 17 17 19 19 19 21 21 22 27 32 33 24 27 27 30 32 32 32 33 33 36

torque Nm mm length 75 228 95 214 110 219 120 213 90 223 120 216 170 210 100 214 120 214 160 224 450 280 600 280 600 280 350 300 350 300 450 300 500 300 450 300 550 300 600 300 550 300 600 300 600 300

�drive 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 1/2“ 3/4“ 3/4“ 3/4“ 1“ 1“ 1“ 1“ 1“ 1“ 1“ 1“ 1“ 1“

p/n 798 10 15 p/n 798 10 20 p/n 798 11 00 p/n 798 10 30 p/n 798 20 20 p/n 798 20 30 p/n 798 20 40 p/n 798 30 10 p/n 798 30 20 p/n 798 40 05 p/n 798 50 10 p/n 798 50 20 p/n 798 50 25 p/n 798 52 40 p/n 798 52 70 p/n 798 52 75 p/n 798 60 00 p/n 798 60 05 p/n 798 50 30 p/n 798 60 10 p/n 798 60 30 p/n 798 60 20 p/n 798 60 40

Hand tire filler Calibrated version * Makes examining of the tire pressure and filling the tire possible. * For connection to the workshop compressed air network. * With gas station or lever plugs. * Handy grasp with 2-step fill lever gives optimal handling. (Release and fill position) * Manometer 0 - 10 bar, Ø 80 mm with rubber protective cap. * Manometer with double volume scale bar/psi Complete calibrated devices with official calibration stamp and sequential unit number. Hand tire filler with lever connector Manometer Ø 80 mm, calibrated Hand tire filler with gas station connector Manometer Ø 80 mm, calibrated

p/n 613 94 20 p/n 613 94 40

Wheel security release tool Set of 8 impact sockets sizes 16.8 - 25,8mm ideally to open most of the commonly found security wheel nuts. The sockets are driven using the impact thorn by a hammer onto the security wheel nut and are then removed using a wheel cross. The slim form permits use on rims with very narrow mounting holes. Wheel security release tool

p/n 913 77 00

E 15

Wheel security breaker

21 -27,5 mm, 1/2" □ drive Ideally to open of most normal wheel security nuts Socket size 1+2 - 21x24,5* Socket size 3+4 – 26x27,5* Impact extension 75 mm Wheel security breaker set 2 pcs* Wheel security breaker set 3 pcs

p/n 913 75 05 p/n 913 75 10 p/n 913 75 15 p/n 913 75 00 p/n 913 75 50

Twist-Sockets

17 -22 mm, 1/2" □ drive Sockets made from high-strength special steel with a unique fixing special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded off hexagonal profiles. Twist-Sockets

p/n 913 00 30

Twist-Sockets Gr. 2 19 -25 mm, 1/2" □ drive

Sockets made from high-strength special steel with a unique fixing special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded off hexagonal profiles. Twist-Sockets Gr. 2

p/n 913 00 20

Universal hose clamp pliers Locking for exhaust connecting clips On newer vehicles the connection between exhaust pipe and exhaust manifold is made with a hose clamp which can be difficult to remove. This hose clamp is extremely rigid and cannot be spread with conventional pliers without damage or deformation! Universal hose clamp pliers with locking for exhaust connecting clips

p/n 605 03 05

Exhaust pipe cutter Exhaust pipe cutter for stainless steel exhaust pipes p/n 618 20 50

E 16

Cooling system tester model G Metering range: 0 - 2,5 bar, with quick-coupler. Universally applicable device for the examination of the cooling system. - Radiator evacuating pump Mod. K-SK p/n 404 14 60, made from impact resistant plastic with quick-coupler. - rapid pressure build-up in the cooling system through a long pump stroke. - Impact-protected, well readable manometer. - Release valve - 2 one-turn cap adapters made from steel - 9 system thread adapters The system adapter is connected when needed to the adapter with flexible hose and quick-coupler. Cooling system adapter No.: 1, 18, 23, 26, 31, 32, 38, 42, 62, 65, 81 Type : Universal (see cooling system adapter list) Cooling system tester model G 12-tlg. in a plastic case

p/n 405 62 00

Cooling system tester model 1 Metering range: 0 - 2,5 bar, with quick-coupler. For testing the cooling system as well as the cylinder head leak tightness. Type : Adapter KS 1 57 + 60mm Standard (bayonet cap) Adapter KS 31 Ford KA / Mondeo, Opel, Seat, Skoda, Rover Adapter KS 62.1 Audi, VW , Seat Alhambra, Ford Galaxy Radiator pressure pump model S-SK 2 0 - 2,5 bar cylinder head leak tightness tester Test liquid Adapter KS 1 Adapter KS 31 Adapter KS 62.1 Flexible connector FZ 30 Cooling water thermometer, dipping shank 135 mm lg. Cooling system tester model 1 in a plastic case

p/n 404 15 00 p/n 405 25 00 p/n 405 00 10 p/n 404 60 10 p/n 404 63 10 p/n 404 66 21 p/n 404 63 00 p/n 404 24 00 p/n 405 65 00

Cooling system tester model 2 -NFZ Metering range: 0 - 4,0 bar, with quick-coupler. For testing the cooling system of commercial motor vehicles. With metal adapters. Type : MB, MAN, Iveco Radiator pressure pump model S-SK 1 0 - 4,0 bar Flexible connector FZ 30 Cooling water thermometer, dipping shank 135 mm lg. Adapter cap KS 1 Universal Adapter cap KS 5 MAN/Krupp Adapter cap KS 19 MB NFZ, 2-Kreis-K端hlsystem Adapter cap KS 40 MB-SK, Iveco Cooling system tester model. 2 in a plastic case

p/n 404 14 50 p/n 404 63 00 p/n 404 24 00 p/n 404 60 10 p/n 404 60 50 p/n 404 61 90 p/n 404 64 00 p/n 404 71 50

F 01

Cooling system tester model VAG Radiator pressure pump model S-SK 1 0 - 4,0 bar Flexible connector FZ 30

UNI cooling system adapter VA50 UNI cooling system adapter UA60J Cooling system adapter AK1 Cooling system adapter KS38 Cooling system adapter KS65 Cooling system tester model VAG

p/n 404 14 50 p/n 404 63 00 p/n 403 36 00 p/n 404 66 00 p/n 404 60 10 p/n 404 63 80 p/n 404 66 50 p/n 905 69 50

in a plastic case

Cooling system tester model Opel Radiator pressure pump model S-SK 1 0 - 4,0 bar Flexible connector FZ 30

UNI cooling system adapter VA50 UNI cooling system adapter UA60J Cooling system adapter AK1 Cooling system adapter KS31 Cooling system adapter KS77 Cooling system tester model OPEL

p/n 404 14 50 p/n 404 63 00 p/n 403 36 00 p/n 404 66 00 p/n 404 60 10 p/n 404 63 10 p/n 404 67 70 p/n 905 69 60

in a plastic case

Cooling system tester model PSA-, Fiat-, Renault Radiator pressure pump model S-SK 1 0 - 4,0 bar Flexible connector FZ 30

p/n 404 14 50 p/n 404 63 00 UNI cooling system adapter VA50 p/n 403 36 00 UNI cooling system adapter UA60J p/n 404 66 00 Cooling system adapter AK1 p/n 404 60 10 Cooling system adapter KS23 p/n 404 62 30 Cooling system adapter KS25 p/n 404 62 50 Cooling system tester model PSA-, Fiat-, Renault in a plastic case p/n 905 69 70

Cooling system tester model Asians Radiator pressure pump model S-SK 1 0 - 4,0 bar Flexible connector FZ 30

UNI cooling system adapter VA50 UNI cooling system adapter UA60J Cooling system adapter AK1 Cooling system adapter K33 Cooling system adapter K47 Cooling system adapter K56 Cooling system tester model Asians

p/n 404 14 50 p/n 404 63 00 p/n 403 36 00 p/n 404 66 00 p/n 404 60 10 p/n 404 61 80 p/n 404 64 70 p/n 404 65 60 p/n 905 69 80

in a plastic case

Radiator pressure pump model S-SK 2 Metering range: 0 - 2,5 bar, with quick-coupler.

Because of the long stroke of the pump a quick pressure build-up is ensured in the cooling system. The easily readable manometer, Ă&#x2DC; 50 mm, is impact-protected by a rubber cap. Radiator pressure pump model S-SK 2

F 02

p/n 404 15 00

Radiator pressure pump model S-SK 1 Metering range: 0 - 4,0 bar, with quick-coupler

For compression testing the cooling system up to 4.0 bar. Because of the long stroke of the pump a quick pressure build-up in the cooling system is ensured. The well readable manometer, Ă&#x2DC; 50 mm, is impact-protected by a rubber cap. Type : Universal, special BMW M 62 / 73 engine 8 /12 cyl., commercial vehicles Radiator pressure pump model S -SK 1

p/n 404 14 50

Radiator pressure pump Metering range 0-2,5 bar For filler necks with external diameter of 57 mm and 60 mm. For compression testing the cooling system. Radiator pressure pump model SV clamp buckle, air release valve Radiator pressure pump model SDV bayonet catch, air release valve

p/n 404 14 00 p/n 404 13 00

Cooling system vacuum filling equipment For bubble free filling of the cooling system. The vacuum filling equipment is connected to the vehicle cooling system with the corresponding cooling system adapter. The vacuum produced allows a leak test of the system to be performed. The system can then be filled bubble free. Simple application without subsequent ventilation saves additional time. Type : Universal Cooling system vacuum filling equipment model 1 without adapter p/n 405 75 00 Cooling system vacuum filling equipment model 1A with adapter UA 50 p/n 403 36 00 p/n 405 75 50

F 03

Cooling system adapters Adapters for connecting the radiator and/or expansion tank to the test set. All caps with connection for quick-coupler. For these fit:

Radiator pressure pump model S-SK 2 Radiator pressure pump model S-SK 1 Radiator pressure pump model K-SK

p/n 404 15 00 p/n 404 14 50 p/n 404 14 60

Adapter

p/n

Adapter

p/n

Adapter

p/n

Adapter

p/n

KS 1 (R) KS 5 (R) KS 6 (R) KS 16 (R) K 33 (R) KS 19 (R) KS 23 (G) KS 24 (R) KS 25 (G) KS 26(GW) KS 31 (G) KS 32 (G)

404 60 10 404 60 50 404 60 60 404 61 60 404 61 80 404 61 90 404 62 30 404 62 40 404 62 50 404 62 60 404 63 10 404 63 20

KS 35 (G) KS 36 (G) KS 38 (AG) KS 39 (R) KS 40 (G) KS 41 (G) KS 42 (G) KS 43 (G) KS 44 (R) KS 47 (R) KS 49 (G) KS 53 (R)

404 63 50 404 63 60 404 63 80 404 63 90 404 64 00 404 64 10 404 64 20 404 64 30 404 64 40 404 64 70 404 64 90 404 65 30

KS 55 (G) KS 56 (R) KS 57 (R) KS 58 (R) KS 59 (G) KS 61 (G) KS 62.1 (G) KS 64 (G) KS 65 (AG) KS 66 (G) KS 67 (R) KS 72 (R)

404 65 50 404 65 60 404 65 70 404 65 80 404 65 90 404 66 10 404 66 21 404 66 40 404 66 50 404 66 60 404 66 70 404 67 20

KS 74 (G) KS 75 (AG) KS 77 (G) KS 78 (G) KS 79 (R) KS 81 (G) KS 82 (G) KS 83 (G) KS 84 (G) KS 85 (G) KS 85 (GW) KS 90 (G)

404 67 40 404 67 50 404 67 70 404 67 80 404 67 90 404 68 15 404 68 20 404 68 30 404 68 40 404 68 55 404 68 50 404 68 80

(R) = bayonet cap

Manufacturer Alfa Romeo Standard

(G) = thread

(GW) = thread / angled

Adapter

p/n

KS 23 (G) KS 1 (R) KS 25 (G)

404 62 30 404 60 10 404 62 50

Audi Standard A3, A4, A6 `97-, TT Autobianchi Standard

KS 62.1 (G) KS 1 (R) KS 65 (AG)

404 66 21 404 60 10 404 66 50

KS 1 (R)

404 60 10

Bentley GT Continental Coupe Amaga

F 04

KS 62.1 (G)

404 66 21

KS 31 (G)

404 63 10

(AG) =outside thread

Manufacturer BMW Old models 5er, 7er , 524 TD -`96 3er -`6.98, Z3, 3er `7.98-, 5er 97-, X5series, new models `005er `6.03B端ssing Standard Chrysler 171 PS `89185 PS `91-, Type 300M `98-, Cherokee WJ 3.11, Plymouth 3,3 V6 Cherokee TD ` 97Vision, Interpride, Concorde Voyager TD Type GS `96-

Adapter

p/n

KS 1 (R) KS 32 (G) KS 42 (G)

404 60 10 404 63 20 404 64 20

KS 43 (G)

404 64 30

KS 84 (G)

404 68 40

KS 16 (R)

404 61 60

KS 23 (G)

404 62 30

KS 1 (R)

404 60 10

KS 83 (G)

404 68 30

KS 24 (R)

404 62 40

Manufacturer Citroen Standard, Jumper, Picasso, C5 XM, Evasion, Berlingo `97Xantia 3.0 V6 / 2.1 TD, XM 2.5 TD, Xsara `99Daewoo Standard

Adapter

p/n

Farmer 309 Type 500, 700 `97Ferrari Standard Type 350, 355 Fiat Standard Ducato / 2,5 TDi, Tipo, Tempra Ford Standard, Transit,

Probe, Maverick Galaxy Mondeo 94-, KA `96-, Focus, Fiesta `95-, Fusion 03´-, Scorpio Scorpio / Transit 95-, Mondeo 99´Mondeo, Cougar, Escort `97C-Max Hanomag-Henschel Standard Honda Standard Concerto, Accord `92-, Civic, Legend Civic Coupe `93-, Accord `98Hyundai Standard

Adapter

p/n

Isuzu KS 23 (G)

404 62 30

KS 1 (R)

404 60 10

KS 55 (R)

404 65 50

KS 31 (G)

404 63 10

Standard

K 33 (R)

404 61 80

KS 1 (R)

404 60 10

KS 1 (R) KS 16 (R)

404 60 10 404 61 60

Euro-Tech, Euro-Truck, Euro-Star

KS 40 (G)

404 64 00

Iveco Standard

DAF Standard, comm vehicles Type 45 comm vehicles `92Daihatsu Standard Move (L601), Cuore ( L201, L501) Deutz engines Engine KHD 1012 Engine KHD 1015 Fendt Standard

Manufacturer

KS 1 (R)

404 60 10

Daily 2000, series C

KS 23 (G)

404 62 30

KS 64 (G)

404 66 40

KS 25 (G)

404 62 50

KS 1 (R)

404 60 10

Daily Transporter Jaguar Standard

KS 1 (R)

404 60 10

KS 56 (R)

404 65 60

XJ 64, Type S

KS 31 (G)

404 63 10 404 66 10

404 67 50 404 62 40

XK 8, XJ 8, XIC, X-Type Kia Standard

KS 61 (G)

KS 75 (AG) KS 24 (R)

KS 1 (R) KS 90 (G)

404 60 10 404 68 80

KS 1 (R) KS 16 (R) KS 5 (R) KS 62.1 (G)

404 60 10 404 61 60 404 60 50 404 66 21

Lada Standard Lamborghini Standard

KS 35 (G)

404 63 50

KS 1 (R)

404 60 10

KS 1 (R) KS 23 (G)

404 60 10 404 62 30

KS 1 (R)

404 60 10

KS 1 (R) KS 23 (G)

404 60 10 404 62 30

Lancia Standard Land Rover Discovery, Range Rover Range Rover 25 DSF

KS 31 (G) KS 42 (G)

404 63 10 404 64 20

KS 23 (G)

404 62 30

Freelander 2,0 Di

KS 25 (G)

404 62 50

KS 83 (G)

404 68 30

KS 23 (G)

404 62 30

KS 1 (R) KS 1 (R)

404 60 10 404 60 10

KS 23 (G)

404 62 30

KS 16 (R)

404 61 60

KS 62.1 (G)

404 66 21

KS 5 (R) K 33 (R) KS 16 (R) KS 40 (G) KS 62.1 (G)

404 60 50 404 61 80 404 61 60 404 64 00 404 66 21

K 33 (R) KS 1 (R) KS 47 (R) KS 57 (R) K 33 (R)

404 61 80 404 60 10 404 64 70 404 65 70 404 61 80

KS 31 (G)

404 63 10

KS 1 (R)

404 60 10

K 33 (R) KS 62.1 (G)

404 61 80 404 66 21

Freelander `03Defender TD 5, Discovery TD 5 Land-/construction machines Standard John Deere

KS 31 (G)

404 63 10

John Deere

KS 61 (G)

404 66 10

Lanz

KS 49 (G) KS 85 (GW)

404 64 90 404 68 50

KS 16 (R)

404 61 60

Standard Linde Fork lift Man, Krupp Standard

K 33 (R) KS 1 (R) KS 23 (G) KS 53 (R)

404 61 80 404 60 10 404 62 30 404 65 30

Krupp engine Type F90, F 2000 Type L71

KS 56 (R)

404 65 60

Mazda

K 33 (R)

404 61 80

Standard 121 323 F `95Premacy `00-

F 05

Manufacturer MB PKW, Viamo A class, CDi C class `95-, class E (W124, 210) S class C class -`94, SLK, SLC Coupe, CLK, Vito M class Vans, Sprinter `99-, 208D, 210D, 212D, 214, 314 NFZ, Citaro( TC 400 )

Adapter

p/n

Manufacturer

Adapter

p/n

KS 1 (R) KS 82 (G) KS 81 (G)

404 60 10 404 68 20 404 68 15

Porsche Standard Boxster, 911er `97-, Carrera 996 Cayenne `02-

KS 1 (R) KS 62.1 (G) KS 65 (AG)

404 60 10 404 66 21 404 66 50

KS 24 (R)

404 62 40

Proton

KS 83 (G) KS 24 (R)

404 68 30 404 62 40

Standard Renault

KS 56 (R)

404 65 60

KS 1 (R) KS 19 (R)

404 60 10 404 61 90

KS 6 (R) KS 23 (G)

404 60 60 404 62 30

KS 16 (R) KS 19 (R)

404 61 60 404 61 90

Standard Safrane, Laguna, Megane, Twingo, Rapid Diesel `90-, Traffic, Master Espace, Avantime 02´Rover

KS 25 (G)

404 62 50

KS 79 (G) KS 40 (G)

404 67 90 404 64 00

Standard, Mini SD1 Metro 115, 200, 400, 2000, Cabriolet 216i, 420si, 620ti, 800

KS 1 (R) KS 23 (G)

404 60 10 404 62 30

KS 24 (R) KS 78 (G)

404 62 40 404 67 80

K 33 (R) KS 1 (R) KS 47 (R)

404 61 80 404 60 10 404 64 70

6000 Diesel engines (BMW ) from 2,5l 620si `97-, 600 75 Models `98-, 200, 400, RT-RS Saab Standard

K 33 (R) KS 32 (G) KS 47 (R) KS 43 (G) KS 25 (G)

404 61 80 404 63 20 404 64 70 404 64 30 404 62 50

KS 1 (R)

404 60 10

KS 56 (R)

404 65 60

KS 25 (G)

404 62 50

K 33 (R) KS 1 (R) K 33 (R)

404 61 80 404 60 10 404 61 80

900 `94- (Opel) 900 / 9000 -`93 Models `99Scania

KS 31 (G) KS 25 (G) KS 61 (G)

404 63 10 404 62 50 404 66 10

KS 24 (R) KS 23 (G)

404 62 40 404 62 30

Standard, Vobis 4

KS 1 (R) KS 41 (G)

404 60 10 404 64 10

KS 72 (R)

404 67 20

KS 44 (R)

404 64 40

KS 31 (G)

404 63 10

Mod. 112 88-, 143 `98-

KS 49 (G) KS 49 (G)

404 64 90 404 64 90

K 33 (R)

404 61 80

Mod. 112 `85 – `88, Vobis 4

KS 16 (R)

404 61 60

KS 83 (G) KS 23 (G) KS 26 (GW) KS 1 (R)

404 68 30 404 62 30 404 62 60 404 60 10

KS 59 (G)

404 65 90

KS 1 (R) KS 38 (AG)

404 60 10 404 63 80

KS 49 (G) KS 61 (G) KS 77 (G)

404 64 90 404 66 10 404 67 70

KS 65 (AG) KS 62.1 (G)

404 66 50 404 66 21

KS 6 (R) KS 23 (G) KS 1 (R)

404 60 60 404 62 30 404 60 10

Mod. 113, 114, 124, 144 Seat Standard Arosa, Cordoba, Ibiza Vario -, Leon `00 Toledo `98Alhambra Skoda Standard `97Oktavia, Fabia Felicia `99-

KS 31 (G) KS 38 (AG) KS 65 (AG) KS 49 (G)

404 63 10 404 63 80 404 66 50 404 64 90

KS 39 (R) KS 36 (G) KS 23 (G) KS 25 (G) KS 50 (R)

404 63 90 404 63 60 404 62 30 404 62 50 404 65 00

Smart Standard, Roadster For four Subaru Standard

KS 62.1 (G) KS 90 (G)

404 66 21 404 68 80

KS 1 (R) K 33 (R) KS 47 (R) K 33 (R)

404 60 10 404 61 80 404 64 70 404 61 80

Busses Viano `3.03SK class, Actros, Atego 1217 `99, Type 1728 / 8401, ECOTruck 8401 Mini Mini 01´Cooper S 02´Mitsubishi Standard Space-Wagon, Pajero, Space Runner, Space Gear, L 400 Eclipse, Galant, Carisma, Colt, Lancer, Pajero Sigma, Nissan Standard Terrano `6.96-, Maxima, Almera, Patrol 2,8L D, Micra `12,92Terrano -5.96, Serena `94`Micra, Interstar, Primastar, Kubistar `6,03Primera P11/P12, Terrano II, Navara, Almera 2000 Opel Standard, Frontera -`98, Calibra, Pontiac Trans Sport 2,3 (GM), Corsa B, Vectra, Agila `7/00-, Zafira `01Monterey (jap. Mod.), Agila 1,0 / 1,2 Astra `98-, Sintra `97Movano, Vivaro Arena Omega `87 Omega B series `94Frontera B / TD 2,2 `99Vectra C `02Peugeot Standard 306, 806 D / Otto, 405, 406 D `97205 D, 309 D, 205 GTI 206 `00-, Boxer 2,5 D `99206 -`99 106

Justy Impreza

F 06

`99-,

Manufacturer

Adapter

p/n

Suzuki Standard, Samurai, Vitara, X-90

KS 1 (R)

404 60 10

K 33 (R) KS 56 (R) KS 47 (R)

404 61 80 404 65 60 404 64 70

Swift, Baleno, Wagon-R Alto,

Celica, Starlet, Corolla, RAV 4 `00-, Yaris AE 101 L, Carina E `98-, Carona, Avensis RAV 4 -`99 Celica, Camry `96Avensis (Common Rail) `01Triumph Standard Unimog Standard Volvo Std., 850, 960, V40, V70, S80, XC90 V 50, S 40 `9,03Commercial vehicles Commercial vehicle FH 12 Commercial vehicle FH 12

Adapter

p/n

KS 1 (R)

404 60 10

KS 62.1 (G) KS 62.1 (G) KS 38 (AG)

404 66 21 404 66 21 404 63 80

KS 65 (AG)

404 66 50

K 33 (R)

404 61 80

KS 25 (G)

404 62 50

KS 25 (G)

404 62 50

KS 26 (GW)

404 62 60

VW Standard,

KS 1 (R) K 33 (R) KS 47 (R)

404 60 10 404 61 80 404 64 70

Sharan Golf II / III, Polo 96-, Vento `93-, Lupo `98-, Passat `87`96, Transporter `89-, T4 Passat `97-, Golf IV `97-, LT 28 / 30 / 35, Vento, Bora `98, New Beetle, Touareg Taro Motorbikes Aprillia 650

KS 56 (R)

404 65 60

Leonardo Type 125

KS 67 (R) KS 58 (R) KS 74 (G)

404 66 70 404 65 80 404 67 40

SR 50, all model scooters

KS 1 (R)

404 60 10

KS 16 (R)

404 61 60

KS 25 (G)

404 62 50

KS 85 (G) KS 41 (G) KS 66 (G) KS 25 (G)

404 68 55 404 64 10 404 66 60 404 62 50

Toyota Standard

Manufacturer

F 07

Adapter model SK Suitable for pumps with bayonet cap or clamping catch. This adapter makes it possible to change the pumps for the quickcoupler system. Adapter model SK

p/n 404 19 00

Flexible connector SK 600 mm long with quick-coupler. This distance piece is required everywhere when the pump cannot be put directly onto the radiator and/or expansion tank. Flexible connector SK

p/n 404 63 00

Cooling system adapter model UA 60J For radiator opening Ă&#x2DC; of 18 - 24 mm With quick-coupler Because of the adjustable bridge with gripper jaws this adapter fits most different makes. Type : Daihatsu, Ford Probe, Honda, Hyundai, Isuzu, Kia, Mazda, Mitsubishi, Nissan, Opel Monterey, Subaru, Toyota, VW Taro Cooling system adapter model UA 60J

p/n 404 66 00

Cooling system adapter UA 50 Ă&#x2DC; 20 till 40 mm, with quick-coupler The special 3 stepped construction made from flexible material, which deforms ball-like when in a strained condition, permits safe locking of the cooling system opening. Rough adjustment takes place through manipulation of the hand wheels. It is also possible to make micro-adjustments by use of the tightening screw. Type : Universal Cooling system adapter UA 50

F 08

p/n 403 36 00

Cooling system adapter KS 74 Adapter with quick-coupler for connecting the pressure pump and expansion tank Type: Toyota and Fiat Sedici Cooling system adapter KS 74

p/n 404 67 40

Cooling system adapter KS 77 W Adapter with angled connector, hose and quick-coupler to connect the cooling system with the radiator pressure pump. Type:

Opel Zafira B from 2005

Cooling system adapter KS 77 W

p/n 404 67 75

Cooling system adapter KS 79.1 Adapter with quick-coupler to connect the radiator pressure pump and the expansion tank. Type:

MB Sprinter from 2006

Cooling system adapter KS 79.1

p/n 404 67 950

Cooling system adapter KS 82.2 Adapter with quick-coupler to connect the cooling system with the radiator pressure pump. Type:

MB B class

Cooling system adapter KS 82.2

p/n 404 68 250

Cooling system adapter KS 100 Adapter with quick-coupler to connect the cooling system with the radiator pressure pump. Type:

Fiat Idea and Panda

Cooling system adapter KS 100

p/n 404 70 00

F 09

Cooling system adapter model H Adjustable from Ø 19,5 - 60 mm Direct connection to the pump: Radiator pressure pump model S-SK 2 Radiator pressure pump model S-SK 1

p/n 404 15 00 p/n 404 14 50

Connection only in connection with adapter KS p/n 404 19 00: Radiator pressure pump model SV Radiator pressure pump model SD-V

p/n 404 14 00 p/n 404 13 00

Model H Type 11 12 Japanese 13 Standard 14 Audi, Opel, Scania, VW 15 MB 16 MAN, Krupp

Colour red red black grey

Ø from - to mm 21,0-38,0 19,5-38,0 27,0-42,0 33,0-50,0

p/n 403 35 10 p/n 403 35 20 p/n 403 35 30 p/n 403 35 40

grey blue

26,0-45,0 40,0-65,0

p/n 403 35 50 p/n 403 35 60

Cap test adapter DP With quick-coupler for testing the cooling system caps during error tracing. DP 77 DP 78 DP 79 DP 84 DP 85 DP 90

Type : Type : Type : Type : Type : Type :

Opel Vectra C from `02 Mini Cooper S MB Vivano `03.03BMW 5er `06.03Ford C-Max, Volvo S40 `09.03Kia, Smart For Four

p/n 404 17 70 p/n 404 17 80 p/n 404 17 90 p/n 404 18 40 p/n 404 18 50 p/n 404 18 80

Cap test adapter set Light cap test adapters made from impact resistant plastic with quick-coupler for testing the cooling system caps during error tracing. DP 1 Type : Standard DP 18 Type : Japanese vehicles, Ford, MAN, Opel, VW DP 23/26 Type : Alfa, Chrysler, Citroen, Fiat, Honda, Opel, Peugeot, Renault DP 31 Type : Daewoo, Ford, Jaguar, Opel, Rover, Skoda DP 32 Type : BMW, Rover DP 38 Type : VW DP 62 Type : Audi, Ford, Porsche, Seat, VW, Smart DP 65 Type : Audi, VW DP 81 Type : MB For types see cooling system adapter list. DP 1 bayonet cap DP 18 bayonet cap DP 23/26 DP 31 DP 32 DP 38 DP 62 DP 65 DP 81 Cap test adapter set 9 pcs. in a plastic case

F 10

p/n 404 16 05 p/n 404 13 35 p/n 404 12 35 p/n 404 13 15 p/n 404 13 25 p/n 404 13 85 p/n 404 14 85 p/n 404 16 50 p/n 404 18 15 p/n 405 61 50

Battery acid examiner This equipment allows quick and simple examination of the anti freeze levels, the windshield washer fluid and the battery acid. The anti freeze examination can be made instantly, i.e. independent of the temperature of the coolant (cold or hot). For precise measurement a drop of coolant, windshield washing water and/or battery acid is sufficient. With optimal optical adjustment to allow visual perception by sharpness attitude. Supplied in a carrying bag, with pipette and detailed operating instructions. Coolant and battery acid examiner

p/n 420 00 05

p/n 420 00 00

Battery acid examiner Hand refractometer, go anywhere equipment for examination of the anti freeze levels, the windshield washer fluid and battery acid. Measuring range Ethandiol (ethyl glycol) 0°to-50°C, Propandiol (propylene glycol) 0°to -50°C, battery acid 1.15 to 1.30 g/ml. Highquality quality, zero-line adjustment, visual perception attitude on the eyepiece. Sturdy metal housing. In a hard plastic box including a mini screwdriver for adjustment and a pipette. Coolant and battery acid examiner model Japan OTC p/n 920 00 00

Cylinder head leak tightness tester model SK With quick-coupler connectable to all Pichler cooling system adapter caps and universal plugs. For water-cooled combustion engines. The regenerating test liquid used in this equipment discolours automatically with leakage and ensures accurate inspection results. Cylinder head leak tightness tester Special test liquid 250 cm³ Spec. cleaning and rinsing agent 250 cm³

p/n 405 25 00 p/n 405 00 10 p/n 405 00 30

F 11

Staff thermometer Scale -Ø 63 mm Metering range 0 - 120°C. To check the water temperature. Indispensable for the examination of thermostats, the vehicle temperature display and the water pump. Gr. 1

Dipping shank -Ø 7 mm, 135 mm long. with seal, for adapter model SK.

Gr. 2

Dipping shank -Ø 4 mm, 230 mm log. for adapter model H

Staff thermometer size 1 Staff thermometer size 2

p/n 404 24 00 p/n 404 24 50

Hose clip pliers model F With flexible shaft (530 mm) For pulling together of ear clips on coolant and fuel hoses, cv joints etc. universally applicable, suitable for nearly all passenger car makes. No damage to the clip or hose. Problem-free, fast removal of coolant hoses. Hose clip pliers model F Repair kit (shaft, spring & gripper clamp)

p/n 605 03 25 p/n 605 03 27

Hose clip pliers with “Cartouche principle " Universally applicable with 2/ 3 replaceable shafts. Hose clip pliers with 2 different replaceable flexible shafts and clamps. A third shaft and clamp is available specifically for use on VAG models with new generation clips. Hose clip pliers with 2 flexible, replaceable shafts p/n 905 03 10 Flexible shaft "VAG" SZ3000 for the hose clip pliers p/n 905 03 15

Hose clip pliers for MUBEA clips For the extremely strong and new hose clips MU56 and MU65, which are mounted on VW Passat turbocharger suction hoses and on T5 water hoses. Also for other smaller clips e.g. MU25, MU26, MU27 and MU40 used on other vehicles. In order to make a professional disassembly and assembly of these clips the mechanic requires both of these large pliers. Hose clip pliers for MU25,MU26,MU27,MU40 Hose clip pliers for MU56,MU65

F 12

p/n 905 02 93 p/n 905 02 95

Hose clamp pliers "Clic" model V To open and close "CLIC" clamps. Because of the swivelling grab jaws the pliers are adaptable. Thus hard to reach clamps can be opened and closed without a problem. Type : e.g. Audi / VW, BMW, Opel etc. fuel pipes, cooling system, oil lines and windshield wiper system. Hose clamp pliers "Clic" model V

p/n 605 02 30

Hose clamp pliers model ES for "CLIC" clamps Re-usable "CLIC" clamps are used throughout the motor industry. Be it at fuel pipes, on drive shafts, on negative pressure hoses or heater hoses, they are fitted everywhere. In order to be able to reach the clamps in the different installation positions for disassembly and assembly many different clamping pliers are offered. On this model the jaws are replaceable and rotatable. Thus the position of the pliers can be preset in order for optimal reach of the clamp. The markings on the jaws must always be lined up to each other! Hose clamp pliers model ES for "CLIC" clamps p/n 605 02 70

Hose clamp set For radiator hoses, plastic fuel pipes and many other non steel reinforced hoses. Hose clamp size 1 (up to 10 mm Ø) Hose clamp size 2 (up to 15 mm Ø) Hose clamp size 3 (up to 25 mm Ø) Hose clamp size 4 (up to 45 mm Ø) Hose clamp set 4 pcs

p/n 605 04 00 p/n 605 05 00 p/n 605 06 00 p/n 605 07 00 p/n 605 08 00

F 13

Body work set model K Nine replaceable plastic impact heads with firmly integrated metal threaded inserts - Slide hammer 1kg. - All parts interchangeable. - Can be used as a slide hammer and with the knurled handle as a pure beating tool. Particularly suitably for steel, aluminium bodies and painted surfaces. It is possible by filing or grinding to modify the plastic heads. Body work set model K12 pcs. in a case

p/n 655 75 00

Panel assortment for the body repair man This beautiful and high-quality set composed of three panel hammers with Hickory handles and four dolly’s is supplied in a plastic case. The perfect set for the craftsman who values the optimal relationship between price and quality. Panel set "HICKORY" 7 pcs

p/n 955 09 00

Dolly set F Special dolly set for the stretch and shrink-free treatment of bodies made from normal, high-strength, special thin steel sheets and aluminium. Employment e.g.: door sheets, wing flaring and direct panel beating. A rubber-covered solid steel core provides for a full surface support during the sheet metal working. Used with pick irons for the best way results for colourless damage repair. Hand fist set F 7 pcs.

p/n 655 77 00

Rubber dolly’s with steel core Even the smallest workshop is subject to new technologies. Here we offer dolly’s for aluminium bodies as well as for the treatment of high-strength, specially thin steel sheets in two versions. The dolly’s have a steel core and are covered with rubber. The advantages are: full surface support (more than with conventional steel dolly’s), can be used also for direct impact, arranges the sheet metal without stretch or shrink. Rubber truing blocks set 2 pcs with steel core p/n 955 22 20

G 01

Edge impact iron Ridge width 145 mm 450 mm long. For professional panel beating of edges and flares in hard to reach areas. This tool permits repair without damage to the edges. With a 4 sided grip to check the tool position in cavities. The edge impact iron can be folded up like a pocket knife, thus one can reach nearly every corner with the slim anvil blade e.g. in doors, at the tail sheet metal inside or in quarter panels. Because of the mobile blade the impact is always flat on the outer skin. Edge impact iron

p/n 655 14 00

Torque - panel hammer 1 side flexible-swivelling with spiral outline 42 mm Ø and 1 side smooth 31.5 mm Ø. For material thicknesses from 0,2 to 1.0 mm. Due to the particular design of the tightening yoke of the hammer the beating is converted into a rotating motion the fan-like surface of the hammer stretches the metal so evenly that neither the material condition nor material thickness are changed Torque - panel hammer

p/n 655 05 90

Panel work system model 3 Slide hammer panel set Basic device with slide hammer 5 kg (thread M 18x1,5) p/n 614 87 90 Double hook, mobile p/n 653 55 30 Draw clamp on his own tightening p/n 653 62 00 Finger hook (draw hook "F") p/n 653 63 00 Reinforcement angle/pair (only with finger hook) p/n 653 64 00 Slide hammer panel set model 3

p/n 653 60 00

Pneumatic slide hammer Overall length 660 mm, slide weight 1800 g 2 rubber suction plates: size 1 Ø 155 mm, size 2 Ø 120 mm For the extraction of dents from body surfaces. Using the operating valve on the end of the handle the pressure drop and pressure build-up are regulated. With a compressor air bleed port of 6-8 bar traction power of 100 kg can be achieved. The aluminium grasp is equipped with hand guard and has auxiliary vents to ensure rapid air release. Pneumatic slide hammer

G 02

p/n 655 20 00

Mini draw clamp Body work clamps quick and easy to install. For hard to reach places which have a small working surface. Mini draw clamp model 2 32 x 60 x 50 mm For lateral 90째 course, without dumps and rotating. Mini draw clamp model 2

p/n 652 32 60

Special draw clamp These specially formed clamps allow work in hard to reach places of all stretching applications for the body repair man. Apart from the useful design this tool has enormous strength at the jaws. We have two models available so that as well as a flat muzzle form it is also possible to grip 90째 bent sheet metals and to stretch them. Both draw clamps are provided with a neck slot head, which makes pulling possible when used with a double draw hook or with a chain or slide hammer. Draw clamp with flat cheeks for sheet metals with flat profile Draw over neck slot head p/n 900 16 30 Draw clamp with 90째 cheeks for sheet metals with angular profile. Draw over neck slot head p/n 900 16 40

Triangle drawing equipment Model I-M500 and model X-M200 Special drawing equipment. Since the use of metal bodies on the automobile there have been many variations of draw clamps. The advantage of these devices is that they can be used on columns, hinges, in the shock strut cathedral in fact anywhere where it is possible to fasten with screws or pins. Triangle drawing equipment model X-M200

p/n 900 20 20

Triangle drawing equipment model I-M500

p/n 900 20 21

Triangle drawing equipment model X-M200 + I-M500 p/n 900 20 25

Pair of clamping latches in tongue form Additional equipment for the triangle hauling equipment The clamping jaws are used in connection with the triangle drawing equipment, corrugated for seizing round creases as e.g. within the door frame. Latch pair " tongue form "

p/n 900 20 27

G 03

Draw hook thumb form This draw hook is a valuable and quick link to body work. Without the need to screw in this thumb hook can be inserted into a double draw hook and be used e.g. connected into the eye of a draw clamp. The downward facing tap prevents slippage of the hook. Dead weight 450 gram, maximum tensile load 3 tons. Draw hook thumb form in connection with double draw hook p/n 953 55 10

Twist/pulling equipment longitudinal channel front For stretching and truing the front longitudinal channel and the preparation of part replacement. The screw on plate with an interchangeable pull ring (M20) can be used on the left and right side. The device is screwed onto the bumper attachment. The hauling equipment is fixed with additional clamping devices to prevent detachment. Type: Audi A3, VW Golf IV Twist/hauling equipment longitudinal channel front p/n 652 10 50

Universal telescopic gauge This tool has extremely universal application possibilities due to the special shape and the offset clamping plates of the gap gauge. Because of this it is possible to close the hood or trunk lid with the gap gauge mounted. Also with non parallel running clamping edges the gap gauge can be used, as the clamping plates can also be tilted. Because of the strong construction it is possible, through pulling or pressing the mounted gap gauge to change the gap dimension before welding. Universal telescope gauge

p/n 900 10 30

Grip wrench set 16 pcs Wrenches with rubber-covered handles. Apart from the special composition for body work each wrench is equipped with comfortable skid-proof and cooling restraining rubber grips for comfortable work. Grip wrenches set 16 pcs with rubber-covered handles p/n 900 50 00

G 04

Pneumatic rivet removing drill set With replaceable inserts and drills To allow optimal drilling out of the very hard and variable diameter large rivets during the separation of sheet metals, this special pneumatic rivet removing drill set with 3 replaceable centring attachments and 2 different large " RIVET TWISTING BIT" drill inserts which are co-ordinated to commercially standard rivets. Pneumatic rivet removing drill set with replaceable attachments and drills p/n 825 05 45

Spot welding drill Made from special steel. For the removal of spot welds in sheet metal work and body construction. Spot welding drill HSSE 8,0 mm Ø

p/n 270 50 00

Pneumatic axial grinder Connection: 1/4" internal thread Operating pressure: 6 bar Air consumption: 285 l/min. Air outlet: in front Number of revolutions: 23000 1/Min. Weight: 600 g Particularly for the use of hard metal milling cutters with 6 mm shank. Pneumatic axial grinder p/n 820 50 00

Hard metal milling cutters One piece polished, for the machining of welding seams, point and MIG welds, hardened steel, casting etc. (for application in the pneumatic axial grinder) shank Ø 6 mm. Spherical shape 10 mm Ø Spherical shape 12 mm Ø Drip shape 10 x 16 mm Flame shape 8 x 20 mm Cylindrical shape 10 mm Hard metal milling cutters set 5 pcs

p/n 670 01 00 p/n 670 01 20 p/n 670 21 00 p/n 670 10 80 p/n 670 31 00 p/n 670 50 00

Laser weld seam milling cutter With the laser welding seam milling cutter welding seams can be loosened during body work. Specific milling avoids material weakening and damage to the lacquer finish, this can not to be prevented when grinding welding seams. Misaligned laser welding seams can be followed with the help of the oval-formed base plate. The milling depth is adjusted with the help of a fine thread and a rubber locking mechanism which is infinitely variable; as a result a milling trough of the sheet metal behind it is prevented. Welding seam release tool for laser welded seams Laser weld seam milling cutter set with 2 spherical cutters and 2 plates p/n 960 80 50

G 05

Door hinge adjuster model W Specially formed correcting heads, applicable to many different vehicles. Using specially hardened steel for high rigidity. Because they are screwed into the handle a simple replacement of the correcting heads is possible. Correcting heads: Size 1 Type: Audi 80 /100, Ford Fiesta, DB 201&124, Opel, Renault R5 Size 2 Type: Audi 80 /100, Ford Fiesta, DB 201&124, Opel, Renault R5 Size 3 Type: VW Passat Size 4 Type: Citroën AX /ZX, Ford Escort / Sierra, Peugeot 205 / 405, Renault R5, VW Polo / Golf III Size 5 Type: Opel Corsa B bottom / Omega B top/bottom, doors front: Citroën Evasion, Fiat Ulysse, Peugeot 806 Size 6 Type: Opel Corsa B bottom / Omega B top/bottom, doors front: Citroën Evasion, Fiat Ulysse, Peugeot 806 Size 7 Type: Opel Corsa B top, VW-Passat, Peugeot, Fiat Size 8 Type: Opel Corsa B top, Audi A4, VW Passat 97 top Size 9 Type: Ford Galaxy, Seat Alhambra, VW Sharan Size 10 Type: Ford Galaxy, Seat Alhambra, VW Sharan Parts:

Jaw opening

Side

Size 1 9 mm left Size 2 9 mm right Size 3 10 mm Size 4 12 mm Size 5 8 mm right Size 6 8 mm left Size 7 13 mm right Size 8 13 mm left Size 9 14 mm left Size 10 14 mm right Universal handle 400 mm long.

p/n 654 28 01 p/n 654 28 02 p/n 654 28 03 p/n 654 28 04 p/n 654 26 63 p/n 654 26 64 p/n 654 26 61 p/n 654 26 62 p/n 654 28 08 p/n 654 28 09 p/n 654 28 20

Set compositions: Set Type: No. I Audi, DB, Opel No. II Ford, Renault No. III Peugeot, Citroën No. IV VW No. V Audi, VW No. VI Opel Corsa B bottom / Omega B top/bottom No. VII Opel Corsa B top, Audi A3/A4/A6, Passat No. VIII Ford Galaxy, Seat Alhambra, VW Sharan All sets include a handle.

Correcting heads size 1 & 2 size 1, 2 & 4 size 4 size 3, 4 size 1, 2, 3 & 4 size 5 & 6 size 7 & 8 size 9 & 10

p/n 654 26 50 p/n 654 27 00 p/n 654 27 10 p/n 654 27 50 p/n 654 28 00 p/n 654 26 65 p/n 654 26 60 p/n 654 28 10

Set complete

size1 – size10

p/n 654 29 00

G 06

11 pcs

Hinge disassembly and assembly set Because of the laterally bent SW 12 ratchet handle it is easy to reach inaccessible door hinges. Also can be used on other disassembly and assembly work such as fenders, boot lids, hoods and similar body parts. The very short manufactured bits are held with a retaining ball surely and firmly in the ratchet head, a special spring prevents slipping through and allows safe working. The set contains bits 10,12,13 mm. with twelve-point , M8, M10, M12 in XZN, T40, T45 Torx as Inbus M7 and M8. Hinge disassembly and assembly set 12mm. drive with 10 different inserts p/n 954 45 60

Hinge repair set For the repair of worn hinges and for replacing worn out hollow spring pins with new larger diameter pins. The 3 edged titaniumnitrated special drill does not cut at the front and is cylindrically stepped. This ensures an accurate guidance of the drill and round drilling out of worn, oval hinge holes. Type : Opel Astra, Omega, Vectra etc. Hollow spring pin impact thorn 175 mm Special drill 3 edged, titanium-nitrated Slotted straight pin set Ă&#x2DC; 8, (24 pcs) Hinge repair set in a plastic case

p/n 654 24 60 p/n 274 80 00 p/n 654 24 55 p/n 654 24 50

Lock out set Extensive tool set to open locked vehicles. Different operating tools made of round steel bar; flat steel strip and plastic make it possible to unlock doors using the operating knob, the door lock linkage or the interior door handle. With the three-part 170 cm long "Long Jim" door handles are operated through the car interior. The two plastic wedges allow the entry of the tools. For illumination a staff flashlight is included. Lock out tool set complete. 22 pcs p/n 657 70 00 in an imitation leather bag Note: Store these door opener tools under lock and bold!

Air spreading cushion 150 X 150 mm For the careful raising and forcing delicate materials e.g. in the instrument panel, windows and while using of the lock out tools. The spread cushion is pushed between the door frame and the A pillar or between the side window and the door panel. By inflating the spread cushion a consistent gap is created without damage. In order to fix or extend the gap plastic wedges e.g. p/n. 6611055 can be inserted. Air spreading cushion

p/n 957 76 50

G 07

Door upholstery release pliers Particularly slim “aggressive" muzzle form, slightly wedge-shaped. For damage-free removal of the clips on door linings and other vehicle linings. Door upholstery release pliers

p/n 654 51 50

Door upholstery release pliers model XL Extra large version of 654 51 50 Predominantly for use with wide linings in the door and luggage compartment upholstery with lining plugs that have a large diameter e.g. in the Golf V this model is highly recommended. Door upholstery release pliers model XL

p/n 654 51 60

Release lever set universal For the careful release of door linings, trim, armature linings and tie-clips without damaging. From break-proof but soft plastic so ideally suited to sensitive materials. Release lever set universal 4 pcs

p/n 654 51 20

Hatch lining release lever 500 mm long. For the disassembly of hatch linings with difficult to reach retaining springs. The release lever directly seizes the retaining tie-clip and prevents damage of the lining. Type: Audi A3, A6, A4 Avant, VW Golf IV and Passat Variant Hatch lining release lever

p/n 654 51 40

Combination assembly wedge model 1 22 x 270 mm, Groove side 15° bent, opening Ø 7,5 mm Slim universally applicable assembly wedge made from wear resistant plastic with groove. For the release of trim, protective caps, operating knobs, window pit borders and door linings. Combination assembly wedge model 1

p/n 611 11 70

Combination assembly wedge model 2 215 mm x 26 mm, groove ca 7,5mm, bent 45° Made from wear resistant plastic. For the release of trim, window pit borders and door linings. Type : Universal, specially MB trim clips Combination assembly wedge model 2

G 08

p/n 961 15 00

Trim disassembly board 350 x 180 x 16 mm. Specially formed assembly and disassembly board for trim. - Light shatter resistant plastic - Reciprocal chamfered induction bevel makes it possible to dismantle close lying trim - Broad low-cut grasp oval permits sensitive even lever off of long trim - Semicircular milled out back for pressing the trim in. Trim disassembly board

p/n 655 50 00

Star screwdriver 200 mm long. For star screw heads with 5 slots, e.g. emblem (boot lid). Type : Saab, Seat, Volvo Star screwdriver

p/n 501 20 00

Fender key model 3 T 30 x 300 mm. Particularly slim T-section key in special length. For the disassembly of the fender, without the disassembly of the door. The slot between the opened door and the A pillar does not permit thicker tools. Type : BMW E 38 For the headlight disassembly Type : Audi A 6, Renault Laguna (headlight adjustment) Fender key model 3

p/n 654 62 00

Wiper arm repair set For the repair of the rusted tight arm linkages Set consists of: Expressing fork for removing the safety moon rings. Special punch for deflecting extremely firm wiper axles. Wire brush for cleaning teeth at the wiper arm axle. T-grasp reamer for cleaning and finish-reaming of the locating hole. Package of snap rings (20 pcs) in â&#x20AC;&#x153;original size" Type : VW Golf 4, Audi A3, Seat, Skoda etc. Wiper arm repair set in a plastic box

p/n 658 24 00

Refilling packing of snap rings (20 pcs)

p/n 658 24 01

G 09

Wiper arm repair set model II For the repair of rusted tight wiper arm linkages. Set consists of: Expressing fork - Removing the snap rings. Punch - Deflecting the wiper axles Wire brush - Cleaning teeth. T-grip reamer - Cleaning and finish-reaming the locating hole. Package of snap rings (20 pcs) in " original size" Type: VW Sharan, Seat Alhambra, Ford Galaxy Wiper arm repair set model II in a plastic box

p/n 658 25 000

Refilling packing of snap rings size II (20 pcs)

p/n 658 25 010

Rear window washer repair set For repairing the rear window washer. With this tool the remainder of the broken off washer nozzle is drilled out of the windshield wiper axle and if necessary the broken brass tubing in the rear windshield wiper motor is repaired. By using the windshield wiper axle screw as a guide the milling cutter for removing the remaining nozzle or the drill for removing the remaining riser pipe is accurately positioned. The brass tubing is replaced by the enclosed plastic tubes.. Type : VW, Audi e.g. Golf IV, Passat, Sharan and Audi A4 Ford Galaxy, Seat Alhambra Rear window washer repair set Plastic tubes 5 pcs. Plastic tubes 10 pcs

p/n 658 23 20 p/n 658 23 25 p/n 658 23 30

Claw hook universal Applicable with slide hammer Impact weight 5 kg or 8 kg This hook model with a internal thread of M18x1.5 is universally applicable with our two slide hammers of 5 kg or 8 kg impact weight. Generally for rough panel work on the body and in the frame area, as well as for the disassembly of knuckles, tie rod joints, articulated bearings of wishbones etc. Claw hook universal Slide hammer complete 5kg Slide hammer complete 8kg

G 10

p/n 953 55 30 p/n 614 87 90 p/n 614 88 00

Wiper arm extractor. For problem-free and damage-free extraction of windshield wiper arms.

P/n

6582232 6582235 6582240 6582245 6582250 6582255 6582257 6582260 6582265 6582270 6582280 6582285 9582272 9582812 9582815 9582820 9582823 9582825 6582260H

22 10,5 14,2 11 14 23 14,2 21 12 26 22 10,5 38,5 37,5 14,2 23,5 14. 12 21

29/31 26 27/25 26 49/36 27/25 24/27,5 54 34 29/31 37 46 43,5 27/25 29 38 30 28

20,5 41 23,4/41 42 45-51 13/27 23,4/41 10/21/34 34,8 29,4 20,5 27 43,5 45 23,4/41 27 27 32 10/21/34

3 4 4 3 3-7 6 4 4 6 3,7 3 3 2,5 4 4 4 3 4 4

29/31 29,4 27 29 49 27 27,5 54 34 29/31 40 46 43,5 27 30 40 30 28

35 35 33 35 45 57 33 34 60 42 35 47 52 52 33 37 47 36,5 34

Wiper arm extractor Type: e.g. Fiat Ulysse front, Peugeot 306, 406, 806 front Saab all models VW Golf IV, V front

Spindle Ball / Hollow / Press. p. K H B B P B B B B B B P H H B B B H

p/n 658 22 32*

Wiper arm extractor p/n 658 22 35 Type : e.g. MB M,ML class rear, combi. models rear Peugeot 306, 806 rear Wiper arm extractor p/n 658 22 40* Type : e.g. Opel Astra G Caravan till 7.99 rear Peugeot 206, 307 rear VW Golf III, Polo old rear Wiper arm extractor p/n 658 22 45* Type : e.g. Citroën C3, C5, Xsara Break, Coupé, Picasso rear Opel Astra G Caravan from 7.99, Zafira rear Peugeot 307 SW rear Renault Clio, Espace, Megane Scenic rear Wiper arm extractor Type : e.g. Audi A3 front BMW E32,34,36,38,39 rear Ford Mondeo from 2000 front

p/n 658 22 50*

Wiper arm extractor Type : e.g. Chrysler Voyager rear

p/n 658 22 55*

Wiper arm extractor Type : e.g. Audi A4, A6 front Ford Focus front Opel Vectra rear Renault Megane rear VW general new models front

p/n 658 22 57*

G 11

Wiper arm extractor Type : e.g. Audi A4, A6 rear Opel Corsa rear Seat Alhambra rear VW Golf IV Passat Variant, Sharan new models rear

p/n 658 22 60H

Wiper arm extractor Type : e.g. Citroën Xsara Break, Coupé front MB M class front VW Lupo, Bora, Polo rear Seat rear Skoda rear

p/n 658 22 60

Wiper arm extractor p/n 658 22 65* Type : e.g. Renault Laguna Kombi from 2000, Megane Scenic from 2000 rear Wiper arm extractor Type : e.g. Citroën C5 Break rear Ford Galaxy new models front Porsche Cayenne front Seat Alhambra new models front VW Sharan new models, Touareg front

p/n 658 22 70

Wiper arm extractor Type : e.g. VW Golf V front

p/n 658 22 80

Wiper arm extractor Type : e.g. Audi A4 from 2004 rear VW Golf V rear

p/n 658 22 85*

Wiper arm extractor Type : e.g. Porsche Cayenne rear VW Touareg rear

p/n 658 22 72

Wiper arm extractor Type : e.g. Audi A3, A4, A6, Audi 80 rear

p/n 958 28 12*

Wiper arm extractor Type : e.g. Honda Civic from 2002 rear

p/n 958 28 15

Wiper arm extractor Type : e.g. Citroën Xsara Picasso front Ford Mondeo new Traveller front Ford Mondeo new Limousine front Peugeot 206, 307, 307 SW Renault Espace ,Megane Scenic front

p/n 958 28 20*

Wiper arm extractor Type : e.g. Renault Megane front

p/n 958 28 23

Wiper arm extractor p/n 958 28 25 Type : e.g. Citroën C5 from 2004, C5 Limousine rear Peugeot 407 rear * Wiper arm extractor set- 10 pcs in a case

G 12

p/n 958 28 00

Kombi two arm extractor Wiper arm & battery pole extractor. Universal, handy two-arm extractor with cone extraction device. Special tool for the extraction of battery pole clamps or to be used as a universal wiper arm extractor. Battery pole and Uni wiper arm extractor

p/n 940 33 50

Rear wiper arm extractor UNI Renault Rear wiper arm extractor UNI set 6 pcs. With 2 extraction plates. Type : Renault all new models and universal. Rear wiper arm extractor Renault

p/n 958 28 30

Wiper arm extractor two armed Universally applicable two armed extractor, auto centring. Wiper arm extractor two armed

p/n 103 99 50

Wiper arm extractor Wiper arm extractor with lateral guidance. Pair of narrow arms for wiper arm extractor p/n 658 21 42 Pair of wide arms for wiper arm extractor p/n 658 21 43 Wiper arm extractor two armed with pair of wide arms p/n 658 21 41 Wiper arm extractor four armed p/n 658 21 40

Wiper arm extractor set. Universally applicable extractor set for the fast and damage-free disassembly of wiper arms. The wiper arm grip arms are used with a spindle. Bridge with spindle Wiper arm extractor universal four armed 7 wiper arm claws size 1 - size 7 Wiper arm extractor set in a case with 7 claws

p/n 658 21 40 p/n 958 29 50

Wiper arm extractor set. Universally applicable extractor set for the fast and damage-free disassembly of wiper arms. The wiper arm claws are used alternatively depending on the wiper construction with a slide hammer or spindle. Type : Universal Bridge with spindle (S) Bridge with slide hammer (H) Wiper arm claw size 1 opening 21,0 mm Wiper arm claw size 2 opening 23,8 mm Wiper arm claw size 3 opening 15,5 mm Wiper arm claw size 4 opening 22,0 mm Wiper arm claw size 5 opening 28,0 mm Wiper arm claw size 6 opening 18,8 mm Wiper arm claw size 7 opening 15,0 mm Wiper arm extractor set in a case with 7 claws

p/n 658 21 00

G 13

Windscreen separation knife model M Release and blade grip made from aluminium with replaceable blade. For the cutting out of bonded windscreens. Operation by one man! (For non-fusible adhesives.) Repl. blade angle No. 1 standard 90째 No. 2 long 90째 No. 4 pointed 90째

blade long 20 mm 36 mm 23 mm

wide 8,5 mm 11,0 mm 3-8 mm

p/n 658 51 00 p/n 658 51 30 p/n 658 51 40

Windscreen separation knife model M incl. stand. knife no.1 p/n 658 50 00 Windscreen separation knife model M set 5 pcs. p/n 658 51 50

Windshield assembly equipment For the problem-free installation of nearly all non-bonded windshields and for drawing in the trim. The trim drawing in tool can be adapted to different trims by the use of 5 different inserts. Three further tools for installing and cleaning e.g. glass remainders are contained in the set. Contents: Handle with 6 m cord Trim drawing in tool with 5 inserts Trim cleaning tool, for removing of glass remainders Hook tool, curved Hook tool, straight Windshield assembly equipment 5 pcs. in a plastic case

p/n 657 35 00

Pass through awl disk disassembly 280 mm lg. For puncturing the windscreen adhesive and for drawing in and drive through of the cutting wire during the disassembly of bonded windscreens. Passing through awl windscreens disassembly p/n 657 35 20

Auto glass disassembly set The set contains as well as the classical hand cutting tools with square cutting wire, a separation knife, a passing through awl, a cutting knife for removing the remaining adhesive, a universal scraper and a clip tool Auto glass disassembly set 8 pcs in a plastic case

G 14

p/n 957 00 00

Suction pad For body attachment and windscreen fixing Suction pad

p/n 658 20 00

Suction pad set model F Carrying capacity: 50 kg For lifting and transporting glass, for installation and removal of windscreens. Consists of two flexible lifting pads and a band. Vacuum lifting pad model F Tightening strap Vacuum lifting pad set model F, 2 pcs

p/n 658 11 00 p/n 658 75 00 p/n 658 12 00

Suction pad set 2 pcs "MINI" Universally applicable, an aid for the extraction of small dents and body damage or when mounting bonded windows, fix of trim, emblems or tuning accessories. This set with a carrying capacity of 10-15 kg. per piece with a suction cup diameter of 57.0 mm is invaluable to any workshop. Vacuum lifting pad set small, Ă&#x2DC;57,0mm suction power 10-15 kg. p/n 958 11 50

Vacuum holder set Cup-Ă&#x2DC; 60 mm, Steel retaining strap 280 mm long., rubber covered For fixing the side windows during work to the doors. The retaining strap is put over the door frame and fixed with the suction plates to the side window within the frame. Type : Universal Vacuum holder set 2 pcs

p/n 658 11 50

Pneumatic one hand disc grinder This unique hand disc grinder functions in connection with fibre corundum grinding disks. The newly conceived 5" hole supporting disk permits a favourable view of the worked surface and special air cooling of the work area. Further advantages are speed regulation, lightness and ergonomically formed handle for easy use. Pneumatic one hand disc grinder "BELLA-VISTA" for 5 holes fibre corundum grinding disks. p/n 804 38 00

G 15

Scraper Handy scraper with a replaceable blade. The blade can be moved by a slider with slots in the grasp. For removing stickers etc. from glass panels. Scraper Spare blade

p/n 311 15 00 p/n 311 11 00

Plastic chisel and scraper set With 100 spare blades The plastic chisel is particularly well suited to removing the stuck on weights from aluminium rims or for the disassembly of adhesive trim and the like. The scraper is only good as long as it is sharp, therefore we include in this set 100 spare blades. Also the handle is flexible therefore easy to modify depending upon the required application. Plastic chisel and scraper set

p/n 311 10 05

Scraper and chisel set 4 pcs. This tool kit can be used either as scrapers or chisels. With solid continuous high-grade stainless steel blades (which can be reground). Ideally for removing plaques, stickers, adhesive detritus, seals etc., also as chisels for the separation of sheet metals and even spot welds. Scraper and chisel set 4 pcs.

p/n 911 01 50

Universal scraper and cutter set This universal set should be in every workshop. Whether you are cutting, scraping, separating or removing this set always has the suitable tool. With blades in widths 12mm, 16mm, 20mm straight, a 16mm diagonal blade for the scraper handle with a screwed holder, or a trapezoid blade for the cutter you are sure to have the correct tool for the job. Scraper set 27 pcs with replaceable blades In a plastic box

G 16

p/n 911 05 00

Torque wrench KS3 20NM to 200Nm 1/2" drive with push through head The work range of this 1/2” torque wrench is from 20NM - 200NM The scale with a display in Nm and lbs-ft is easily readable behind a window, the 36 fine tooth ratchet head has a push through knob. These torque wrenches have a test certificate meeting DIN EN ISO 6789 and have an accuracy of +/-3%. Torque wrench KS3

p/n 906 60 30

Precision micrometer screw gauge Spindle Ø: 8 mm, Measuring drum Ø: 20 mm. The spindle thread is completely hardened and polished. The measuring surfaces are lapped and have a locking ring, ratchet and adjusting nut. The handle, measuring drum diameter and case are matte-chromium plated. With screwed on insulating clamps and hardened measuring surfaces. Size 1 measuring range 0 - 25 mm Size 2 measuring range 25 - 50 mm Size 3 measuring range 50 - 75 mm Size 4 measuring range 75 - 100 mm

p/n 402 00 10 p/n 402 00 20 p/n 402 00 30 p/n 402 00 40

Calliper gauge model ST Reading: 1/10 - 1/20 mm Measuring range: -150 mm Stainless steel (Inox) precision - calliper gauge (DIN 862) lockable. - cross points with depth measuring rod - back with thread table Calliper gauge model ST

p/n 402 10 00

Disk brake calliper gauge Size1 Measuring range: 0 - 60 mm Bill length: 85 mm Reading: 1/10 mm

Size2 0 - 90 mm 120 mm 1/10 mm

For determining the brake disk wear. With divided measuring carriage so when the strength of the brake disk is measured, the calliper gauge can be loosened from the brake disk, without the measure being adjusted. Disk brake calliper gauge size 1 Disk brake calliper gauge size 2

p/n 402 20 00 p/n 402 20 05

Flexible lamp model CMI Flexible lamp 410 mm long with protective pipe, mirror attachment and magnet. Flexible lamp model CMI

p/n 901 03 00

H 01

Stethoscope Flexible listening device for safe location of mechanical damage: Examples: Engine: Faulty valves and bearings. Differential: Running noise Alternator: Defective bearings Body: Creak and screeching noises etc. Stethoscope

p/n 401 50 00

Endoscope model H Effective length = 1000 mm Probe ∅ = 6 mm Bending radius = 30 mm At least distance = 10 mm Line of sight = 0° and 110° Brightness = up to 50000 lux in a distance of 16 mm Battery handle for 3 LR14 for approx. 10 hours of work time For seeing into inaccessible places e.g. engine repair, error tracing, body parts etc. The flexible optical probe, based on optical fibre technology, has an outside diameter of 6.0 mm and can therefore be fed into small openings. So it makes it possible to look into the inside of the engine and into other difficult to access places in the vehicle e.g. transmission, doors, sun roof etc. without time-consuming disassembly work Endoscope model H1000 mm without mirrors Mirror 90° for endoscope Mirror 110° for endoscope Endoscope f. 12V Battery box Endoscope model H complete with mirror 110° in a plastic case

p/n 966 70 06 p/n 966 70 90 p/n 966 71 10 p/n 966 70 16 p/n 966 15 00 p/n 607 76 000

Borescope With a flexible 100cm long probe. With monitor for photo and video recordings The next generation of endoscopes brings this borescope with flexible probe. This has a diameter of 5.5 mm and a length of 1 meter. It is possible to store the captured picture as a photo or even a video recording which can then be viewed on the 3,5 “TFT LCD monitor with 240 pixels: The data can be uploaded also using USB interface or an SD-card onto a computer for further processing. To increase this tools efficiency there are also two optional screw on mirrors with 35° or 45° view angles.

H 02

Borescope without mirror

p/n 907 75 00

Mirror mountable on the probe 35° Mirror mountable on the probe 45°

p/n 907 70 60 p/n 907 70 90

Measuring instrument and adjusting tool for bracket less " AEOROWISCHER" Systems To adjust of the new generation bracket less windshield wipers of Bosch, Valeo etc. Aero wiper arm measuring and adjusting tool basic device with 1 adapter

p/n 95 82 400

Digital measuring equipment A collection of measuring and test tools including a digital calliper gauge a micrometer and dial gauge and a brake disk calliper gauge. Digital precision micrometer 0 - 25 mm Digital precision micrometer 25-50 Digital brake disk checking gauge 0 - 60 mm Digital calliper gauge 150 mm Digital dial gauge 0-10 mm diameter 55 mm

p/n 402 00 15 p/n 402 00 25 p/n 402 20 10 p/n 402 50 00

p/n 430 10 50 Digital measuring equipment kit brake disk checking gauge, dial gauge and stand in a plastic case p/n 402 20 15

H 03

Car jack rubber attachment Disk with 140mm diameter These disks with their stepped receptacle are suitable for nearly all car jacks available in the trade. The 140 mm internal diameter has a cross slot for mounting at the door sill crease. Car jack rubber attachment UNI

p/n 900 25 80

Twist Sockets short 6, 8, 10, 12 mm 1/4“ drive Sockets made from high-strength special steel with a self locking special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded hexagonal profiles. Twist-Sockets short

p/n 913 00 04

Twist Sockets long 8, 10, 12, 14 mm 1/4“-Antrieb Sockets made from high-strength special steel with a self locking special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded hexagonal profiles. Twist sockets long

p/n 913 00 05

Twist Sockets size 1 10 - 19 mm 3/8“ drive Sockets made from high-strength special steel with a self locking special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded hexagonal profiles. Twist sockets size 1

p/n 913 00 10

Twist Sockets 17 -22 mm, 1/2" drive Sockets made from high-strength special steel with a self locking special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded hexagonal profiles. Twist sockets

p/n 913 00 30

J 01

Twist Sockets size 2 19 -25 mm, 1/2" drive Sockets made from high-strength special steel with a self locking special profile. For the release of screws, nuts, rim locks and socket head screws, whose drive profiles are damaged, e.g. rounded hexagonal profiles.. Twist Sockets size2

p/n 913 00 20

E profile Torx socket set long version/ 1/2" drive The 8 pcs set contains sizes with a 1/2" drive and 77 mm length: E10,E12,E14,E16,E18,E20,E22,E24 Outside Torx set 8 pcs long version in a plastic box

p/n 788 10 05

E profile double joint spanner set 5 pc double joint Torx E profile set containing individual sizes for diverse ranges of application. E6xE8 E10xE12 E14xE16 E18xE20 E22xE24 E profile double joint spanner set 5 pcs

p/n 907 10 80 p/n 907 11 20 p/n 907 11 40 p/n 907 11 60 p/n 907 11 80 p/n 907 10 00

Gearwrench set With special bits A bit set to work in tight spaces. The double ratchet ring spanner 8x10mm can be easily used with the 30 short special bits Philips PH 0, 1, 2, 3 hex 4, 5, 6, 7, 8 XZN 5, 6, 8, 10 ,TX with and without tamper proof holes 10, 15, 20, 25, 27, 30, 40, 45 with a max. overall length of 22 mm. Gearwrench set

p/n 970 50 00

Universal Gear plus adapter set This set is an ideal addition for customers who have our ratchet ring spanners, this adapter set consists of hex10mm:1/4" bit, hex10mm:1/4", hex13mm:3/8" and hex19mm:1/2" Adapter set 4 pcs. Gear plus

J 02

p/n 926 00 50

Socket acceptance adapter set 3 pc. drill head to square 1/4", 3/8", 1/2" Socket acceptance adapter set

p/n 926 01 00

Combination wrench set Extra-flat 10 till 22mm This combination wrench has several specific characteristics such as extra flat with a 3.0 mm thick hex 10mm spanner up to a 6.0 mm thick hex 22mm spanner and 12 pointed ring spanners bent 15째. Ideally suitably for machine repair or in the two-wheeler and bicycle repair range. Combination wrench flat set 10 pcs

p/n 910 05 00

Impact release tool with joint attachment 1/2" Universally applicable impact release tool with overall length of 560 mm, a mobile 1/2" joint attachment for the attachment of different box spanners. Especially suitable for the loosening of the central nut during the disassembly of pulleys. Impact release tool 560 mm long, joint attachment 1/2" p/n 904 98 70

Joint socket set This set with sizes of 8, 9, 10, 12, 14, 16 mm. and a 3/8" drive is predominantly suitable for the disassembly and assembly of glow plugs. Additionally it is suitable for other areas of application in which a jointed socket can be used.

Joint socket set 6 pcs In a plastic case

p/n 904 76 00

Ribe screwdriver set Grip hexagon drive A 7 piece set of Ribe M4 to M10. The screwdrivers have a female hexagon at the handle end for strong operation and the blade passes through to the handle end. Ribe screwdriver set

p/n 902 52 00

J 03

Ratchet 72 teeth "Extra-flat" The advantage is in the detail of this ratchet series. For example a standard commercial 1/2" ratchet has a head diameter of approx. 38 mm; this version has one of 32 mm. The same is valid with the overall height; here the difference from a standard 1/2" ratchet is 33mm as oppose to 44mm. Ratchet 1/4" extremely slim head Ratchet 3/8" extremely slim head Ratchet 1/2" extremely slim head

p/n 970 71 10 p/n 970 71 20 p/n 970 71 30

Socket wrench sets "TRIPLE-Plus“ ‘These ’TRIPLE Plus" socket sets it is possible to operate hexagonal, double hexagon, hex, E-Torx as well as metric and imperial sizes. Sets come with1/4" - 3/8" - 1/2" square drives and sockets in imperial or metric dimensions. Also available is the "TRIPLE Plus" passage socket wrench set for stay bolts etc. Socket wrench set "TRIPLE-Plus" 40 pcs, 1/4" drive p/n 920 23 50 Socket wrench set "TRIPLE-Plus" 47 pcs, short, long and bit sockets p/n 920 23 75 Socket wrench set "TRIPLE-Plus" 12 pcs, 50 mm long sockets 1/4" drive p/n 920 23 80 Socket wrench set "TRIPLE-Plus" 53 pcs, sockets and bits 3/8" drive p/n 920 23 85 Socket wrench set "TRIPLE-Plus" 22 pcs, ratchet, extensions, sockets 1/2" drive p/n 920 24 50 Socket wrench set "TRIPLE-Plus" 17 pcs passage sockets, adapter, ratchet, extension p/n 920 24 70

Socket wrench sets Socket wrench set "imperial sockets" 47 pc, sockets short and long with 1/4" drive p/n 920 22 20 Socket wrench combination set "metric/imperial" 99 pc sockets short and long, bit inserts, ratchets and extensions, grip in 1/4" and 3/8" drive p/n 940 12 50 Socket wrench set “Metric/imperial" 30 pcs, sockets short and long with a 1/2" drive p/n 943 55 00

"E" clips assortment and "E" clips setter These snap rings have versatile application in repair and production plants. The setters in the set have a holder and four replaceable inserts for 6, 7, 8, 9 mm clips. E clip assortment 300 pcs E clip setter set 5 pcs

J 04

p/n 913 43 55 p/n 913 43 57

Punch set with hand guard This set of high-quality punches has several positive characteristics: Special material composition of the points which are not too soft so they do not bend and not too hard and brittle so they do not break or chip easily. With a soft plastic handle with additional hand guard. Dimensions 1.7/2.7/3.7/4.7/5.7/7.7 mm. Punch set with hand guard 6 pcs In a wallet

p/n 960 70 15

Combination wrench set extra long Strength savers as a higher torque is reached during disassembly/assembly. 6mm x 150 mm 15mm x 275 mm 7mm x 160 mm 16mm x 275 mm 8mm x 160 mm 17mm x 300 mm 9mm x 175 mm 18mm x 300 mm 10mm x 180 mm 19mm x 330 mm 11mm x 205 mm 20mm x 340 mm 12mm x 225 mm 21mm x 340 mm 13mm x 225 mm 22mm x 350 mm 14mm x 250 mm Combination wrench set 12 pcs

p/n 711 03 00

E profile ring spanner straight Matt polished chrome vanadium steel in industrial quality. E profile ring spanner size 1 E 6 - E 8 E profile ring spanner size 2 E10 - E12 E profile ring spanner size 3 E14 - E18 E profile ring spanner size 4 E20 - E24

p/n 716 00 60 p/n 716 01 00 p/n 716 01 40 p/n 716 02 00

E profile ring spanner set 4 pcs

p/n 716 00 00

Not contained in the set: E profile ring spanner E16 - E22

p/n 716 01 80

E profile ring spanner offset Industrial quality Ring spanner offset E 6 - E 8 Ring spanner offset E 7 - E 11 Ring spanner offset E 10 - E 12 Ring spanner offset E 14 - E 18 Ring spanner offset E 16 - E 22 Ring spanner offset E 20 - E 24

p/n 716 10 60 p/n 716 10 70 p/n 716 11 00 p/n 716 11 40 p/n 716 11 60 p/n 716 12 00

Ring spanner set offset 6 pcs.

p/n 716 10 00

J 05

Combination ratchet ring spanner sets with 72 teeth Multigear Combination wrench 10mm short Combination wrench 11mm short Combination wrench 12mm short Combination wrench 13mm short Combination wrench 14mm short Combination wrench 15mm short Combination wrench 16mm short Combination wrench 17mm short Combination wrench 18mm short Combination wrench 19mm short Combination ratchet ring spanner set 10 pcs 10 till 19mm short version Combination wrench 8mm long Combination wrench 9mm long Combination wrench 10mm long Combination wrench 11mm long Combination wrench 12mm long Combination wrench 13mm long Combination wrench 14mm long Combination wrench 15mm long Combination wrench 16mm long Combination wrench 17mm long Combination wrench 18mm long Combination wrench 19mm long Combination ratchet ring spanner set 12 pcs 8 to 19mm long version

p/n 971 72 10 p/n 971 72 11 p/n 971 72 12 p/n 971 72 13 p/n 971 72 14 p/n 971 72 15 p/n 971 72 16 p/n 971 72 17 p/n 971 72 18 p/n 971 72 19 p/n 971 72 00 p/n 971 71 08 p/n 971 71 09 p/n 971 71 10 p/n 971 71 11 p/n 971 71 12 p/n 971 71 13 p/n 971 71 14 p/n 971 71 15 p/n 971 71 16 p/n 971 71 17 p/n 971 71 18 p/n 971 71 19 p/n 971 71 00

Flex head combination ratchet ring spanner set Fork ring version with locking device The flex head is lockable in all positions The adapters can be used as ratchet with locking in 1/4" , 3/8" and 1/2" and as bit adapter for 10.0 mm, 5/16" and 1/4" in connection with the wrenches. Flex head combination ratchet ring spanner set 12 pcs. 819mm in a case p/n 903 34 70 Flex head combination ratchet ring spanner set 18 pcs. 819mm in a case p/n 903 34 75

Double-ended ring spanner straight extra long 10 till 24mm High-quality extra long spanners for strength-saving working.

J 06

8 x 10mm 285 mm 10 x 11mm 285 mm 12 x 14mm 325 mm 13 x 15mm 365 mm 16 x 18mm 400 mm 17 x 19mm 400 mm 22 x 24mm 435 mm

p/n 911 02 51 p/n 911 02 52 p/n 911 02 53 p/n 911 02 54 p/n 911 02 55 p/n 911 02 56 p/n 911 02 57

Double-ended ring spanner straight set 7 pcs in a wallet

p/n 911 02 50

Double-ended off set ratchet ring spanner With fast switching pressure switch for on right of and left use. L thickness 10 x 11mm* 200 12 / 13 12 x 14mm* 230 11 / 12 13 x 17mm* 260 13,5 / 15 15 x 16mm* 260 15,5 / 15,5 19 x 22mm* 310 16 / 17 21 x 23mm 340 17 / 18 24 x 27mm 360 18 / 18 30 x 32mm 430 20 / 20 Double-ended ratchet ring spanner set* 5 pcs

p/n 703 51 00 p/n 703 51 20 p/n 703 51 30 p/n 703 51 50 p/n 703 51 90 p/n 703 52 10 p/n 703 52 40 p/n 703 53 00 p/n 703 50 00

Double-ended ratchet ring spanner E profile "extra flat" Straight: E4 x E6 E6 x E8 E10 x E12

L 108 108 134

thickness 7,5 7,5 9

p/n 703 20 10 p/n 703 20 20 p/n 703 20 30

Off set: E4 x E6 E6 x E8 E10 x E12

L 108 108 128

thickness 7,5 7,5 9

p/n 703 21 10 p/n 703 21 20 p/n 703 21 30

Socket wrench set 1/4" Profile Super Lock Change-over quick release ratchet with insert, turning grasp, sliding grasp and universal joint, 1/4" square adapter x hex and 50, 100, flex. 145 mm extensions for each. Socket Super Lock 4, 4.5, 5, 5.5 6, 7, 8, 9, 10, 11, 12, 13, 14mm Insets T profile tamper proof sockets T10, T15, T20, T25, T30, T40 Phillips sockets size 1, 2, 3 Pozidrive bit sockets size 1, 2, 3 Slotted bit head sockets size 4, 5.5, 7 Hex bit sockets 3, 4, 5, 6, 7, 8 mm Angle allen key, 2, 2.5 Socket wrench set 1/4" 46 pcs Super Lock p/n 720 22 00

Torx socket set Torx sockets short 3/8“ drive E 6, 8, Torx sockets short 1/2“ drive E 10, 12, 14 Torx sockets long 3/8“ drive E 6, 8 Torx sockets long 1/2“ drive E 10, 12, 14 Reduction adapter; 1/2“– 3/8“ Angle extension 1/2“ Torx socket set 12 pcs

p/n 788 25 00

J 07

Socket wrench set 1/4" Surface drive Change-over quick release ratchet with turning handle, sliding handle and universal joint. With 50 and 100 mm extensions and a 150 mm flex extension. Socket surface drive short. 4 , 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm Socket surface drive long. 6, 7, 8, 10, 11, 12, 13 mm Inserts T profile bit sockets tamper proof T10, T15, T20, T25, T30, T40 Phillips bit sockets size 1, 2, 3 Pozidrive bit size 1, 2, 3 Slotted head bit sockets size 4, 5.5, 7 mm Hex bit sockets 3, 4, 5, 6, 7, 8mm Angle allen key 1.27, 1.5, 2, 2.5 Socket adapter 1/4“ square x 1/4“ hexagon for a electric screwdriver Socket wrench set 1/4", 53-tlg

p/n 920 22 00

Socket wrench set 3/8" Profile Super Lock 3/8" □ Change-over ratchet fine-toothed, sliding handle adapter 1/2" □ x 3/8" □ , universal joint with spring, angle extension 75 mm, extension 250 mm, adapter 3/8" square x 8mm hexagon and spark plug sockets 16 / 21mm. Socket Super Lock 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm Socket Super Lock - 63 mm long. SW 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mm. Inserts Hex bit sockets 3, 4, 5, 6, 7, 8, 10mm T profile bit sockets not tamper proof T15, 20, 25, 27, 30, 40, 45, 50, 55 Pozidrive bit sockets size1, 2, 3 Phillips bit sockets size 1, 2, 3 Slotted head bit sockets size 5.5, 7, 8 Socket wrench set 3/8" 61 pcs Super Lock p/n 730 16 00

Socket wrench set 3/4" Profile hexagon 500 mm long quick release ratchet Sliding handle 450 mm lg. Extensions 100, 200 and 400 mm Socket hexagon 19, 21, 22, 23, 24, 26, 27, 29, 30, 32, 35, 36, 38, 41, 46, 50mm Socket wrench set 3/4" 21 pcs

J 08

p/n 750 05 55

Individual parts socket wrench sets Sets Change-over ratchet Change-over ratchet fine-toothed Turning grasp Sliding grasp Sliding grasp adapter 1/2" ď&#x20AC; x 3/8" ď&#x20AC; Universal joint Universal joint with spring Extension 145 mm Lg. Flex. Extension 50 mm long Extension 100 mm long Extension 125 mm long Extension 200 mm long Extension 250 mm long Extension 400 mm long Angle extension75mm long Socket 3,5mm. Socket 4mm. Socket 4,5mm. Socket 5mm. Socket 5,5mm. Socket 6mm. Socket 7mm. Socket 8mm. Socket 9mm. Socket 10mm. Socket 11mm. Socket 12mm. Socket 13mm. Socket 14mm. Socket 15mm. Socket 16mm. Socket 17mm. Socket 18mm. Socket 19mm. Socket 20mm. Socket 21mm. Socket 22mm. Socket 23mm. Socket 24mm. Socket 26mm. Socket 27mm. Socket 29mm. Socket 30mm. Socket 32mm. Socket 35mm. Socket 36mm.

P/n 720 22 00

P/n 720 24 00

P/n 730 16 00

P/n 750 05 55

1/4"

hex.1/4"

3/8"

hex. 3/4"

720 22 10

720 24 10

750 05 10 731 02 00

720 20 70 720 20 30

720 20 80

720 20 90 720 20 50 720 20 60

720 20 50 720 20 60

750 05 15 730 10 16 730 10 14 730 20 35 750 05 11 750 05 12 730 10 25 750 05 14 730 10 75

720 34 05 720 34 55 720 35 05 720 35 55 720 36 05 720 37 05 720 38 05 720 39 05 720 40 05 720 41 15 720 41 25 720 41 35 720 41 45

720 33 50 720 34 00 720 34 50 720 35 00 720 35 50 720 36 00 720 37 00 720 38 00 720 39 00 720 40 00 720 41 10 720 41 20 720 41 30 720 41 40

730 11 06 730 11 07 730 11 08 730 11 09 730 11 10 730 11 11 730 11 12 730 11 13 730 11 14 730 11 15 730 11 16 730 11 17 730 11 18 730 11 19 730 11 20 730 11 21 730 11 22 730 1124

750 05 19 750 05 21 750 05 22 750 05 23 750 05 24 750 05 26 750 05 27 750 05 29 750 05 30 750 05 32 750 05 35 750 05 36

J 09

P/n 720 22 00 1/4"

Sets Socket 38 Socket 41 Socket 46 Socket 50 Socket 8 63 mm Lg. Socket 9 63 mm Lg. Socket 10 63 mm Lg. Socket 11 63 mm Lg. Socket 12 63 mm Lg. Socket 13 63 mm Lg. Socket 14 63 mm Lg. Socket 15 63 mm Lg. Socket 17 63 mm Lg. Socket 19 63 mm Lg. Spark plug sockets 16 Spark plug sockets 21 Pozidrive bit socket size1 Pozidrive bit socket size2 Pozidrive bit socket size3 Phillips bit socket size 1 Phillips bit socket size 2 Phillips bit socket size 3 Slotted head socket 4 Slotted head socket 5.5 Slotted head socket 7 Slotted head bit socket 8 Hex bit socket 3 Hex bit socket 4 Hex bit socket 5 Hex bit socket 6 Hex bit socket 7 Hex bit socket 8 Hex bit socket 10 T profile bit socket not tamper proof T15 T profile bit socket not tamper proof T20 T profile bit socket not tamper proof T25 T profile bit socket not tamper proof T27 T profile bit socket not tamper proof T30 T profile bit socket not tamper proof T40 T profile bit socket not tamper proof T45 T profile bit socket not tamper proof T50 T profile bit socket not tamper proof T55 T profile bit socket tamper proof T10 T profile bit socket tamper proof T15 T profile bit socket tamper proof T20 T profile bit socket tamper proof T25 T profile bit socket tamper proof T27 T profile bit socket tamper proof T30 T profile bit socket tamper proof T40

720 20 10 720 20 20 720 20 25 720 11 10 720 11 20 720 11 25 720 24 50 720 25 50 720 26 00

P/n 720 24 00 hex. 1/4"

720 20 10 720 20 20 720 11 10 720 11 20 720 24 50 720 25 50 720 26 00

720 10 30 720 10 40 720 10 50 720 10 60 720 10 70 720 10 80

720 10 30 720 10 40 720 10 50 720 10 60

720 21 10 720 21 15 720 21 20 720 21 25 720 21 27 720 21 30 720 21 40

720 10 80

P/n 730 16 00 3/8"

P/n 750 05 55 hex. 3/4" 750 05 38 750 05 41 750 05 46 750 05 49

730 60 08 730 60 09 730 60 10 730 60 11 730 60 12 730 60 13 730 60 14 730 60 15 730 60 17 730 60 19 730 10 18 730 10 17 730 20 10 730 20 20 730 20 30 730 20 31 730 20 32 730 20 33 730 25 50 730 26 00 730 28 80 730 10 30 730 10 40 730 10 50 730 10 60 730 10 70 730 10 80 730 10 95 730 31 15 730 31 20 730 31 25 730 31 27 730 31 30 730 31 40 730 31 45 730 31 50 730 31 55

Operating tool Change-over ratchet Sliding grasp Universal joint Crank Extension 50 mm Extension 75 mm Extension 105 mm Extension 125 mm Extension 200 mm Extension 50 mm Extension 400 mm Extension 500 mm Extension 600 mm

J 10

1/4" P/n 721 00 00 721 10 10 721 10 30 721 10 20 721 10 40 721 10 50 786 31 00 786 32 00

3/8" P/n 731 00 00 731 10 10 731 10 30 731 10 20 731 10 40 731 10 50 731 10 60 731 10 70 786 40 00 786 42 00

1/2" P/n 741 00 00 741 10 10 741 10 30 741 10 20 741 10 40 741 10 50 741 10 60 786 51 00 786 50 00 786 52 00

3/4" P/n 751 00 00 751 10 10 751 10 30 751 10 40 751 10 50 -

1" P/n 761 00 00 761 10 10 761 10 30 761 10 40 761 10 50 -

Sockets metric MM 4,0 4,5 5,0 5,5 6,0 7,0 8,0 9,0 10,0 11,0 12,0 13,0 14,0 15,0 16,0 17,0 18,0 19,0 20,0 21,0 22,0 23,0 24,0 25,0 26,0 27,0 28,0 29,0 30,0 32,0 33,0 34,0 36,0 38,0 40,0 41,0 42,0 44,0 46,0 48,0 50,0 55,0 60,0 65,0 70,0 80,0

1/4" hex. P/n 722 04 00 722 04 50 722 05 00 722 05 50 722 06 00 722 07 00 722 08 00 722 09 00 722 10 00 722 11 00 722 12 00 722 13 00 722 14 00 -

3/8" hex. P/n 731 30 60 731 30 70 731 30 80 731 30 90 731 31 00 731 31 10 731 31 20 731 31 30 731 31 40 731 31 50 731 31 60 731 31 70 731 31 80 731 31 90 731 32 00 731 32 10 731 32 20 -

3/8" d. hex. P/n 732 06 00 732 07 00 732 08 00 732 09 00 732 10 00 732 11 00 732 12 00 732 13 00 732 14 00 732 15 00 732 16 00 732 17 00 732 18 00 732 19 00 732 20 00 732 21 00 732 22 00 -

1/2" hex. P/n 742 05 00 742 05 50 742 06 00 742 07 00 742 08 00 742 09 00 742 10 00 742 11 00 742 12 00 742 13 00 742 14 00 742 15 00 742 16 00 742 17 00 742 18 00 742 19 00 742 20 00 742 21 00 742 22 00 742 23 00 742 24 00 742 25 00 742 26 00 742 27 00 742 28 00 742 29 00 742 30 00 742 32 00 742 33 00 742 34 00 742 36 00 -

1/2" d. hex. P/n -

743 08 00 743 09 00 743 10 00 743 11 00 743 12 00 743 13 00 743 14 00 743 15 00 743 16 00 743 17 00 743 18 00 743 19 00 743 20 00 743 21 00 743 22 00 743 23 00 743 24 00 743 25 00 743 26 00 743 27 00 743 28 00 743 29 00 743 30 00 743 32 00 743 33 00 -

3/4" hex. P/n -

3/4" d. hex. P/n

753 20 00 753 22 00 753 23 00 753 24 00 753 25 00 753 26 00 753 27 00 753 30 00 753 32 00 753 34 00 753 36 00 753 38 00 753 40 00 753 41 00 753 42 00 753 44 00 753 46 00 753 50 00 753 55 00 -

752 17 00752 19 00 752 22 00 752 23 00 752 24 00 752 25 00 752 26 00 752 27 00 752 28 00 752 29 00 752 30 00 752 32 00 752 33 00 752 34 00 752 36 00 752 38 00 752 40 00 752 41 00 752 42 00 752 44 00 752 46 00 752 48 00 752 50 00 752 55 00 752 60 00 -

1" d. hex. P/n -

762 36 00 762 41 00 762 46 00 762 50 00 762 55 00 762 60 00 762 65 00 762 70 00 762 80 00

Sockets inch MM 1/8" 3/16" 1/4" 5/16" 7/32" 9/32" 11/32" 3/8" 7/16" 1 /2 " 9/16"

1/4" hex. P/n 722 50 00 722 50 10 722 50 20 722 50 30 722 50 40 722 50 50 722 50 70 722 50 80 722 50 90 722 51 00 722 51 10

MM 7/16“ 1/2" 9/16“ 5/8“ 11 /16“ 3/4" 7/8“

3/8" d. hex. P/n 732 50 20 732 50 30 732 50 40 732 50 60 732 50 70 732 50 80 732 51 00

MM 1/4" 3/8“ 7/16“ 1/2" 9/16“ 19/32“ 5/8" 11/16“ 3/4" 13/16“ 7/8“ 15/16“ l“ 1.1/16“ 1.1/8“ 1.1/4“

1/2" hex. P/n 742 50 00 742 50 10 742 50 20 742 50 30 742 50 40 742 50 50 742 50 60 742 50 70 742 50 80 742 50 90 742 51 00 742 51 10 742 51 20 742 51 30 742 51 40 742 5150

1/2" d. hex. P/n 743 50 00 743 50 10 743 50 20 743 50 30 743 50 40 743 50 50 743 50 60 743 50 70 743 50 80 743 50 90 743 51 00 743 51 10 743 51 20 743 51 30 743 51 40 743 51 50

J 11

Change-over ratchet model B Robust workshop quality, polished chrome vanadium. Change-over ratchet model B 1 1/4" � drive 125 mm lg. p/n 770 70 10 Change-over ratchet model B 2 3/8" � drive 175 mm lg. p/n 770 70 20 Change-over ratchet model B 3 1/2" � drive 250 mm lg. p/n 770 70 30 Change-over ratchets model B set 3 pcs p/n 770 70 50 Flexible change-over ratchet model G 1 1/4" � drive 165 mm lg. p/n 770 60 10 Flexible change-over ratchet model G 2 3/8" � drive 265 mm lg. p/n 770 60 20 Flexible change-over ratchet model G 3 1/2" � drive 330 mm lg. p/n 770 60 30 Flexible change-over ratchets model G set 3 pcs p/n 770 60 50 Ratchet repair kits for model B und G: Repair kit 1/4" � drive Repair kit 3/8" � drive Repair kit 1/2" � drive

p/n 770 72 10 p/n 770 72 20 p/n 770 72 30

Turning head ratchet 3/8" 3/8" � drive, 260 mm long.

Fine toothed pass through ratchet for difficult to reach screw connections e.g. glow plugs, fenders, manifolds and starter motors. The swivel joint can be locked in any position. Also can be used as a stroke ratchet. Turning head ratchet 3/8"

p/n 730 30 00

Ratchet adapter � drive Size 1 1/4" Size 2 3/8" Size 3 1/2"

overall height 40 mm 55 mm 65 mm

p/n 770 30 10 p/n 770 30 20 p/n 770 30 30

Power bar 1/2"

1/2" � drive The ideal aide e.g.: wheel assembly, wheel hub nuts, shock-mount screws, etc. Hinge handle 280 mm long. Hinge handle 610 mm long. "Extra Long"

J 12

p/n 741 10 90 p/n 741 10 00

Angle extensions Special extension, with 30° tilt for work in hard to reach places. Size 0 Size 1 Size 2 Size 3 Size 4 Size 5 Size 7 Size 8 Size 9 Size 10

1/4" � drive 25 mm long 3/8" � drive 32 mm long 3/8" � drive 75 mm long 3/8" � drive 125 mm long 3/8" � drive 250 mm long 3/8" � drive 450 mm long 1/2" � drive 52 mm long 1/2" � drive 125 mm long 1/2" � drive 250 mm long 1/2" � drive 500 mm long

p/n 721 20 10 p/n 731 20 10 p/n 731 20 20 p/n 731 20 30 p/n 731 20 40 p/n 731 20 50 p/n 741 20 10 p/n 741 20 30 p/n 741 20 60 p/n 741 20 80

Flexible extension 300 mm long Flexible extension 1/4" � drive Flexible extension 3/8" � drive

p/n 786 33 00 p/n 786 34 00

Adapter extension � drive �-output 1/2" 3/8" 1/2" 3/8" 1/2" 3/8"

length 125 mm 210 mm 600 mm

p/n 786 20 50 p/n 786 21 00 p/n 786 60 00

Reduction adapter Quality inserts from chrome vanadium. � drive �-output length 1/4" 3/8" 25 mm 3/8" 1/4" 25 mm 3/8" 1/2" 35 mm 1/2" 3/8" 58 mm 1/2" 3/4" 60 mm 3/4" 1/2" 60 mm 3/4" 1" 80 mm 1" 3/4" 80 mm

p/n 726 00 10 p/n 736 00 10 p/n 736 00 20 p/n 746 00 10 p/n 746 00 20 p/n 756 00 10 p/n 756 00 20 p/n 766 00 10

Sockets hexagon "Extra deep" 1/4" � drive, 50 mm long

4,0 mm. 4,5 mm. 5,0 mm. 5,5 mm. 6,0 mm. 7,0 mm. 8,0 mm. 9,0 mm. 10,0 mm. 11,0 mm. 12,0 mm. 13,0 mm. 14,0 mm. Sockets hexagon "Extra deep" set 13 pcs

p/n 740 60 40 p/n 740 60 45 p/n 740 60 50 p/n 740 60 55 p/n 740 60 60 p/n 740 60 70 p/n 740 60 80 p/n 740 60 90 p/n 740 61 00 p/n 740 61 10 p/n 740 61 20 p/n 740 61 30 p/n 740 61 40 p/n 740 62 00

on a rail

J 13

Sockets double hexagon "Extra deep " 1/4" � drive, 50 mm long.

4,0 mm. 4,5 mm. 5,0 mm. 5,5 mm. 6,0 mm. 7,0 mm. 8,0 mm. 9,0 mm. 10,0 mm. 11,0 mm. 12,0 mm. 13,0 mm. 14,0 mm. Sockets double hexagon set 13 pcs

p/n 740 70 40 p/n 740 70 45 p/n 740 70 50 p/n 740 70 55 p/n 740 70 60 p/n 740 70 70 p/n 740 70 80 p/n 740 70 90 p/n 740 71 00 p/n 740 71 10 p/n 740 71 20 p/n 740 71 30 p/n 740 71 40 p/n 740 72 00

on a rail

Sockets hexagon "Extra deep " 3/8" � drive , 55 mm long.

7 mm. 8 mm. 9 mm. 10 mm. 11 mm. 12 mm. 13 mm. 14 mm. 15 mm. 16 mm. 17 mm. 18 mm. 19 mm. Sockets hexagon set 13 pcs

p/n 741 60 70 p/n 741 60 80 p/n 741 60 90 p/n 741 61 00 p/n 741 61 10 p/n 741 61 20 p/n 741 61 30 p/n 741 61 40 p/n 741 61 50 p/n 741 61 60 p/n 741 61 70 p/n 741 61 80 p/n 741 61 90 p/n 741 62 50

on a rail

Sockets hexagon "Extra deep "

1/2" � drive, 77 long 10 mm. 11 mm. 12 mm. 13 mm. 14 mm. 15 mm. 16 mm. 17 mm. 18 mm. 19 mm.

p/n 742 61 00 p/n 742 61 10 p/n 742 61 20 p/n 742 61 30 p/n 742 61 40 p/n 742 61 50 p/n 742 61 60 p/n 742 61 70 p/n 742 61 80 p/n 742 61 90

Sockets hexagon set 10 pcs

J 14

21 mm. 22 mm. 24 mm. 25 mm. 26 mm. 27 mm. 28 mm. 30 mm. 32 mm. 36 mm.

p/n 742 62 10 p/n 742 62 20 p/n 742 62 40 p/n 742 62 50 p/n 742 62 60 p/n 742 62 70 p/n 742 62 80 p/n 742 63 00 p/n 742 63 20 p/n 742 63 60 p/n 742 64 00

Socket double hexagon "Extra deep" 1/2" � drive, 77 lg. 8 mm. 9 mm. 10 * mm. 11 * mm. 12 * mm. 13 * mm. 14 * mm. 15 * mm. 16 * mm. 17 * mm. 18 * mm. 19 * mm. 20 mm.

p/n 743 60 80 p/n 743 60 90 p/n 743 61 00 p/n 743 61 10 p/n 743 61 20 p/n 743 61 30 p/n 743 61 40 p/n 743 61 50 p/n 743 61 60 p/n 743 61 70 p/n 743 61 80 p/n 743 61 90 p/n 743 62 00

21 mm. 22 mm. 23 mm. 24 mm. 26 mm. 27 mm. 28 mm. 29 mm. 30 mm. 31 mm. 32 mm. 36 mm.

Sockets double hexagon set * 10 pcs

p/n 743 62 10 p/n 743 62 20 p/n 743 62 30 p/n 743 62 40 p/n 743 62 60 p/n 743 62 70 p/n 743 62 80 p/n 743 62 90 p/n 743 63 00 p/n 743 63 10 p/n 743 63 20 p/n 743 63 60 p/n 743 64 00

Universal joint socket double hexagon 1/4" � drive 4 mm. 5 mm. 6 mm. 7 mm. 8 mm. 9 mm. 10 mm. 11 mm. 13 mm.

p/n 780 20 40 p/n 780 20 50 p/n 780 20 60 p/n 780 20 70 p/n 780 20 80 p/n 780 20 90 p/n 780 21 00 p/n 780 21 10 p/n 780 21 30

Universal joint socket double hexagon set 9 pcs in a sheet steel case p/n 780 22 00

Universal joint socket double hexagon 3/8" � drive

10 * mm. p/n 780 31 00 11 * mm. p/n 780 31 10 12 * mm. p/n 780 31 20 13 * mm. p/n 780 31 30 14 * mm. p/n 780 31 40 15 * mm. p/n 780 31 50 16 mm. p/n 780 31 60 17 * mm. p/n 780 31 70 18 mm. p/n 780 31 80 19 * mm. p/n 780 31 90 Universal joint socket double hexagon set* 8 pcs on a rail p/n 780 30 00

J 15

Universal joint socket hexagon 3/8" � drive x 75 mm long

Socket inside depth 10 mm. 31 mm 11 mm. 31 mm 12 mm. 31 mm 13 mm. 31 mm 14 mm. 31 mm 15 mm. 31 mm 16 mm. 31 mm 17 mm. 31 mm 18 mm. 31 mm 19 mm. 31 mm Universal joint socket model L set, 10 pcs on a rail

p/n 782 51 00 p/n 782 51 10 p/n 782 51 20 p/n 782 51 30 p/n 782 51 40 p/n 782 51 50 p/n 782 51 60 p/n 782 51 70 p/n 782 51 80 p/n 782 51 90 p/n 782 50 50

Universal joint socket double hexagon 3/8" � drive

Short (45 to 50mm long) universal joint socket for hard to reach places. Suitable for hexagon and the new double hexagon profiles. 8 mm. 9 mm. 10 mm. 11 mm. 12 mm. 13 mm.

14 mm. 15 mm. 16 mm. 17 mm. 18 mm. 19 mm.

Universal joint socket set 12 pcs. in a sheet steel case

p/n 780 22 50

Crow ring spanner double hexagon Crow ring spanner set open 4 pcs double hexagon on a rail 1/2“ drive-23, 24, 25, 26 mm p/n 935 10 00

Flexible open ring spanner 8x130, 9x130, 10x130, 11x150, 12x150 Open ring spanner with hexagon /double hexagon with knuckle Special slim version, for the release/tightening of screw connections on fuel and hydraulic lines. Because of the knuckle and the slim construction it is also possible to use them where there is little room to work.

J 16

Flexible open ring spanner set, 5 pcs

p/n 905 09 000

Flexible open ring spanner 14mm Flexible open ring spanner 17mm Flexible open ring spanner 19mm

p/n 905 09 140 p/n 905 09 170 p/n 905 09 190

Crow ring spanner

3/8" � drive Very slim for inaccessible line screw connections. 10mm. 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm Crow ring spanner, set 10 pcs on a rail

p/n 735 11 00 p/n 735 11 10 p/n 735 11 20 p/n 735 11 30 p/n 735 11 40 p/n 735 11 50 p/n 735 11 60 p/n 735 11 70 p/n 735 11 80 p/n 735 11 90 p/n 735 10 00

Crow ring spanner set 8mm – 19mm 3/8” drive 21mm – 24mm 1/2”drive Crow ring spanner set* 15 pcs

p/n 735 00 00

T-profile bit sockets

1/4" � drive x 32 long not tamper proof T 10 p/n 729 11 10 T 15 p/n 729 11 15 T 20 p/n 729 11 20 T 25 p/n 729 11 25

T 27 T 30 T 40

T-profile bit sockets 7 pcs on a rail

p/n 729 11 27 p/n 729 11 30 p/n 729 11 40 p/n 729 11 00

T-profile bit sockets

3/8" � drive x 50mm. Made from high alloy special steel. T9 T 10 T 15 T 20 T 25 T 27

p/n 788 10 09 p/n 788 10 10 p/n 788 10 15 p/n 788 10 20 p/n 788 10 25 p/n 788 10 27

T-profile bit sockets 11 pcs on a rail

T 30 T 40 T 45 T 50 T 55

p/n 788 10 30 p/n 788 10 40 p/n 788 10 45 p/n 788 10 50 p/n 788 10 55 p/n 788 12 00

J 17

T profile bit sockets 1/2"� drive x 55mm. Made from high alloyed special steel. T20 p/n 788 82 00 T25 p/n 788 82 50 T27 p/n 788 82 70 T30 p/n 788 83 00 T40 p/n 788 84 00

T45 T50 T55 T60

T-profile bit sockets 9 pcs on a rail

p/n 788 84 50 p/n 788 85 00 p/n 788 85 50 p/n 788 86 00 p/n 788 88 00

Special composition special sizes for motor vehicle special screws A 38 pieces assortment with specific tools for working on the special screws used in newer motor vehicle types. Like e.g.: T profile; T 60, T70 and T80 or T30 length 300 mm. XZN M16 tamper proof and M18x100 drive ¾“, Ribe M7x240, M8x240 M10x140 and M9x100, hex bit sockets 5x160 with ballpoint etc. Special composition special sizes 38 pieces

p/n 988 24 00

T-profile bit sockets

1/2" � drive. Made from high alloy special steel. T 20 T 25 T 30 T 40 T 45 T 50 T 55 T 60 T 70

95 mm long 95 mm long 120 mm long 120 mm long 120 mm long 120 mm long 140 mm long 120 mm long 115 mm long

p/n 788 52 00 p/n 788 52 50 p/n 788 53 00 p/n 788 54 00 p/n 788 54 50 p/n 788 55 00 p/n 788 55 50 p/n 788 56 00 p/n 788 57 00

T-profile bit sockets 9 pcs in a plastic case

p/n 788 51 10

TS profile bit sockets 5 star

1/4 � drive x 25 mm long, tamper proof TS 10 p/n 729 13 100 TS 15 p/n 729 13 150 TS 20 p/n 729 13 200 TS 25 p/n 729 13 250 TS 27 p/n 729 13 270 TS profile bit sockets 9 pcs on a rail

J 18

TS 30 TS 40 TS 45 TS 50

p/n 729 13 300 p/n 729 13 400 p/n 729 13 450 p/n 729 13 455 p/n 729 13 50

E profile bit sockets

1/4" � drive x 22 mm long E profile bit socket E 4 E profile bit socket E 5 E profile bit socket E 6 E profile bit socket E 7 E profile bit socket E 8 E profile bit socket E 10 E profile bit sockets set 6 pcs on a rail

p/n p/n p/n p/n p/n p/n p/n

729 00 40 729 00 50 729 00 60 729 00 70 729 00 80 729 01 00 729 00 00

E profile bit sockets

3/8" � drive x 26 mm long Sockets profile E 4 Sockets profile E 5 Sockets profile E 6 Sockets profile E 7 Sockets profile E 8

p/n 788 30 04 p/n 788 30 05 p/n 788 30 06 p/n 788 30 07 p/n 788 30 08

Sockets profile E 10 Sockets profile E 11 Sockets profile E 12 Sockets profile E 14 Sockets profile E 16

E profile bit sockets set 10 pcs on a rail

p/n 788 30 10 p/n 788 30 11 p/n 788 30 12 p/n 788 30 14 p/n 788 30 16

p/n 788 30 30

E profile bit sockets

3/8" � drive x 55 mm long Sockets profile E 4 Sockets profile E 5 Sockets profile E 6 Sockets profile E 7 Sockets profile E 8

p/n 788 36 04 p/n 788 36 05 p/n 788 36 06 p/n 788 36 07 p/n 788 36 08

Sockets profile E 10 Sockets profile E 12 Sockets profile E 14 Sockets profile E 16

E profile bit sockets set 9 pcs on a rail

p/n 788 36 10 p/n 788 36 12 p/n 788 36 14 p/n 788 36 16

p/n 788 36 50

E profile bit sockets 1/2" � drive

E 10 x 36 mm p/n E 11 x 37 mm p/n E 12 x 37 mm p/n E 14 x 37 mm p/n E 16 x 37 mm p/n

788 31 00 788 31 10 788 31 20 788 31 40 788 31 60

E 18 x 37 mm E 20 x 37 mm E 22 x 37 mm E 24 x 40 mm

E profile bit sockets, set 9-tlong in a steel box

p/n 788 31 80 p/n 788 32 00 p/n 788 32 20 p/n 788 32 40

p/n 788 10 00

E profile bit sockets "long " 1/2" � drive x 77 mm long E 10 E 12 E 14

p/n 788 41 00 p/n 788 41 20 p/n 788 41 40

E 16 E 18 E 20

E profile bit sockets set 6 pcs on a rail

p/n 788 41 60 p/n 788 41 80 p/n 788 42 00 p/n 788 43 00

J 19

E profile universal joint sockets 3/8" � drive

E profile universal joint sockets E 6 E profile universal joint sockets E 8 E profile universal joint sockets E 10 E profile universal joint sockets E 12 E profile universal joint sockets E 14 E profile universal joint sockets set 5 pcs on a rail

p/n 780 70 60 p/n 780 70 80 p/n 780 71 00 p/n 780 71 20 p/n 780 71 40 p/n 780 72 00

Hex bit socket 3/8" � drive

44 mm long 44 mm long 44 mm long 160 mm long 44 mm long 55 mm long 220 mm long 44 mm long 100 mm long 44 mm long 155 mm long

3 4 5 5 6 6 6 8 8 10 10

p/n 790 00 30 p/n 790 00 40 p/n 790 00 50 p/n 790 01 50 p/n 790 00 60 p/n 790 03 60 p/n 790 01 60 p/n 790 00 80 p/n 790 01 80 p/n 790 01 00 p/n 790 02 10

Hex bit socket 1/2"� drive 4mm 4mm 5mm 5mm 5mm 5x8mm 6mm 6mm 6mm 6mm 6x8mm 6mm 6mm 7mm 7mm 7mm 8mm 8mm 8mm 8mm 8mm

38mm 52mm 38mm 52mm l00mm 180mm 38mm 52mm 70mm 100mm 105mm 160mm 220mm 52mm 100mm 150mm 38mm 52mm 80mm 120mm 190mm

p/n 790 05 40 p/n 790 10 40 p/n 790 05 50 p/n 790 10 50 p/n 790 30 50 p/n 790 40 50 p/n 790 05 60 p/n 790 10 60 p/n 790 20 60 p/n 790 30 60 p/n 790 36 80 p/n 790 45 60 p/n 790 55 60 p/n 790 10 70 p/n 790 30 70 p/n 790 40 70 p/n 790 05 80 p/n 790 10 80 p/n 790 30 80 p/n 790 40 80 p/n 790 50 80

10mm 10mm 10mm 10mm 12mm 12mm 14mm 14mm 17mm 17mm 19mm 19mm 5/32" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16"

40 mm 52 mm 100 mm 140 mm 40 mm 140 mm 40 mm 52 mm 42 mm 60 mm 42 mm 60 mm 52 mm 52 mm 52 mm 52 mm 52 mm 52 mm 52 mm 52 mm

p/n 790 06 00 p/n 790 11 00 p/n 790 31 00 p/n 790 41 00 p/n 790 06 20 p/n 790 41 20 p/n 790 06 40 p/n 790 11 40 p/n 790 06 70 p/n 790 11 70 p/n 790 06 90 p/n 790 11 90 p/n 790 80 10 p/n 790 80 20 p/n 790 80 40 p/n 790 80 50 p/n 790 80 60 p/n 790 80 70 p/n 790 80 80 p/n 790 80 90

Hex bit universal joint socket 3/8" � drive x 62 mm long

Tilt-free bit sockets for hex screws Hex bit socket 5 Hex bit socket 6 Hex bit socket 7 Hex bit socket 8 Hex bit socket 10 Hex bit socket 12 Hex bit universal joint sockets set 6 pcs

J 20

p/n 786 00 50 p/n 786 00 60 p/n 786 00 70 p/n 786 00 80 p/n 786 01 00 p/n 786 01 20 p/n 786 11 50

Hex bit ballpoint sockets 3/8" � drive x 100 mm lg.

Hex bit ballpoint socket 4 Hex bit ballpoint socket 5 Hex bit ballpoint socket 6 Hex bit ballpoint socket 7 Hex bit ballpoint socket 8 Hex bit ballpoint sockets 5 pcs. on a rail

p/n 790 72 40 p/n 790 72 50 p/n 790 72 60 p/n 790 72 70 p/n 790 72 80 p/n 790 73 00

XZN bit socket Spanner size 4mm 4mm 8mm 10mm 5mm 6mm 6mm 7mm 8mm 8mm 8mm 10mm 10mm 10mm 10mm 12mm 12mm 12mm 14mm 14mm 16mm 16mm 16mm tamper proof

length 25 mm 125 mm 93 mm 93 mm 60 mm 60 mm 100 mm 53 mm 60 mm 100 mm 120 mm 60 mm 100 mm 120 mm 180 mm 60 mm 100 mm 140 mm 60 mm 100 mm 60 mm 100 mm 60 mm

� drive 1/4 " 1/4 " 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

p/n 791 00 04 p/n 791 00 14 p/n 791 10 80 p/n 791 11 00 p/n 791 20 50 p/n 791 20 60 p/n 791 30 60 p/n 791 20 70 p/n 791 20 80 p/n 791 30 80 p/n 791 40 80 p/n 791 21 00 p/n 791 31 00 p/n 791 41 00 p/n 791 42 00 p/n 791 21 20 p/n 791 31 20 p/n 791 41 20 p/n 791 21 40 p/n 791 31 40 p/n 791 21 60 p/n 791 31 60 p/n 791 51 60

Ribe bit socket 1/2" � drive 5mm 6mm 8mm 10mm 12mm 12mm 14mm 14mm 16mm

63 mm lg 63 mm lg 63 mm lg 63 mm lg 63 mm lg 120 mm lg 63 mm lg 100 mm lg 63 mm lg

p/n 792 10 50 p/n 792 10 60 p/n 792 10 80 p/n 792 11 00 p/n 792 11 20 p/n 792 21 20 p/n 792 11 40 p/n 792 21 40 p/n 792 11 60

J 21

Rail set 400 mm long., 15 clamps each Rails for sockets, spring steel, chromed. Rail 1/4 " � drive Rail 3/8" � drive Rail 1/2" � drive Rail set 3 pcs

p/n 740 60 10 p/n 741 60 10 p/n 742 60 10 p/n 742 60 50

T profile bits not tamper proof 30 mm long. Bit T 20 Bit T 25 Bit T 27 Bit T 30

p/n 570 62 00 p/n 570 62 50 p/n 570 62 70 p/n 570 63 00

Bit T 40 Bit T 45 Bit T 50 Bit T 55

p/n 570 64 00 p/n 570 64 50 p/n 570 65 00 p/n 570 65 50

75 mm long. Bit T 20 Bit T 25 Bit T 27 Bit T 30 Bit T 40

p/n 570 72 00 p/n 570 72 50 p/n 570 72 70 p/n 570 73 00 p/n 570 74 00

Bit T 45 Bit T 50 Bit T 55 Bit T 60 Bit T 70

p/n 570 74 50 p/n 570 75 00 p/n 570 75 50 p/n 570 56 00 p/n 570 57 00

T profile bits tamper proof 30 mm long. Bit T 20 Bit T 25 Bit T 27 Bit T 30

p/n 570 42 00 p/n 570 42 50 p/n 570 42 70 p/n 570 43 00

Bit T 40 Bit T 45 Bit T 50 Bit T 55

p/n 570 44 00 p/n 570 44 50 p/n 570 45 00 p/n 570 45 50

75 mm long. Bit T 20 Bit T 25 Bit T 27 Bit T 30

p/n 570 52 00 p/n 570 52 50 p/n 570 52 70 p/n 570 53 00

Bit T 40 Bit T 45 Bit T 50 Bit T 55

p/n 570 54 00 p/n 570 54 50 p/n 570 55 00 p/n 570 55 50

Ribe socket set 1/2“□ drive M6 till 16 Ribe socket set On a rail

J 22

p/n 992 10 00

RIBE bit socket set M5 till M14 tamper proof ½“drive length 110mm RIBE bit socket set 9 pcs. On a rail

p/n 970 59 70

Ribe bits hexagon 10mm 30mm long Bit Ribe 4mm Bit Ribe 5mm Bit Ribe 6mm Bit Ribe 7mm

p/n 570 58 04 p/n 570 58 05 p/n 570 58 06 p/n 570 58 07

Bit Ribe 8mm Bit Ribe 10mm Bit Ribe 12mm

75mm long Bit Ribe 4mm Bit Ribe 5mm Bit Ribe 6mm Bit Ribe 7mm

p/n 570 59 04 p/n 570 59 05 p/n 570 59 06 p/n 570 59 07

Bit Ribe 8mm p/n 570 59 08 Bit Ribe 10mm p/n 570 59 10 Bit Ribe 12mm p/n 570 59 12

30mm long Bit XZN 5mm Bit XZN 6mm Bit XZN 8mm

p/n 570 00 50 p/n 570 00 60 p/n 570 00 80

Bit XZN 10mm Bit XZN 12mm

p/n 570 01 00 p/n 570 01 20

75mm long Bit XZN 5mm Bit XZN 6mm Bit XZN 8mm

p/n 570 10 50 p/n 570 10 60 p/n 570 10 80

Bit XZN 10mm Bit XZN 12mm

p/n 570 11 00 p/n 570 11 20

30mm long Bit hex 4mm Bit hex 5mm Bit hex 6mm Bit hex 7mm

p/n 570 20 40 p/n 570 20 50 p/n 570 20 60 p/n 570 20 70

Bit hex 8mm Bit hex 10mm Bit hex 12mm

p/n 570 20 80 p/n 570 21 00 p/n 570 21 20

75mm long Bit hex 4mm Bit hex 5mm Bit hex 6mm Bit hex 7mm

p/n 570 30 40 p/n 570 30 50 p/n 570 30 60 p/n 570 30 70

Bit hex 8mm Bit hex 10mm Bit hex 12mm

p/n 570 30 80 p/n 570 31 00 p/n 570 31 20

p/n 570 58 08 p/n 570 58 10 p/n 570 58 12

XZN bits

Hex bits

J 23

Mini bit reversible ratchet With live ring With the multiplicity of bits that are on offer in our program come these two mini bit ratchets as an ideal addition. The small construction, 15° bend, with switchover lever for left/right and the live ring, which makes manual operation of the loose or set screw possible, make this the ideal tool. The ratchets are equipped with a special holding device and have 1/4" and 5/16" drives to accept the available bits. Bit ratchet "MINI" 1/4" acceptance reversible with live ring p/n 906 11 40 Bit ratchet "MINI" 5/16" acceptance reversible with live ring p/n 906 11 60

Extension "Impact" � drive 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 1" 1" 1"

long mm 75 125 250 175 250 330 175 250 330

Ø mm 30 30 30 44 44 44 54 54 54

p/n 794 50 20 p/n 794 50 30 p/n 794 50 40 p/n 796 50 10 p/n 796 50 20 p/n 796 50 30 p/n 797 50 10 p/n 797 50 20 p/n 797 50 30

Ball joint (tilt-free) "Impact" Ball joint Ball joint Ball joint

1/2" � drive 74 mm long 3/4" � drive 105 mm long 1" � drive 128 mm long

p/n 794 60 10 p/n 796 60 10 p/n 797 60 10

Adapter "Impact" 3/8" � drive 3/8" � drive 1/2" � drive 1/2" � drive 3/4" � drive 3/4" � drive 1" � drive

J 24

1/4" � output 1/2" � output 3/8" � output 3/4" � output 1/2" � output 1" � output 3/4" � output

25 mm long 32,5 mm long 36 mm long 44 mm long 52 mm long 62 mm long 76 mm long

p/n 793 70 10 p/n 793 70 20 p/n 794 70 10 p/n 794 70 20 p/n 796 70 10 p/n 796 70 30 p/n 797 70 10

Bits set hex / Torx „Impact“ With adapter ¾“ drive 10 pcs With this assortment we offer the truck, agricultural machinery and construction machine mechanic a top tool for the operation of larger screw sizes. Everything is in a sturdy wooden box with the s drive component ¾ “- drive 22mm hexagonal. The tools in the set have the following sizes: Torx T70, T80, T90, T 100. Hex 14mm, 17mm, 19mm, 22mm, 24mm. Additionally as an option we offer the hex bit size 17 mm with a length of 80 mm. This is needed for operation of the Lukas D3 brake assembly p/n 989 01 00

Bits set hex / Torx „Impact“10 pcs

Impact bit hex 17 x 80 mm (Lukas brake assembly D3) p/n 989 01 70

Socket hexagonal "Impact" 1/2" � drive 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 23mm 24mm 25mm 26mm 27mm 30mm 32mm 34mm

D1 17 18,2 19,5 20,7 22 23,2 24,5 25,7 27 28,2 30,7 32 33,2 34,5 35,7 37 38,2 42 44,5 47

D2 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30

L 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 40 42 42 46

p/n 794 01 00 p/n 794 01 10 p/n 794 01 20 p/n 794 01 30 p/n 794 01 40 p/n 794 01 50 p/n 794 01 60 p/n 794 01 70 p/n 794 01 80 p/n 794 01 90 p/n 794 02 10 p/n 794 02 20 p/n 794 02 30 p/n 794 02 40 p/n 794 02 50 p/n 794 02 60 p/n 794 02 70 p/n 794 03 00 p/n 794 03 20 p/n 794 03 40

J 25

Socket double hexagonal "Impact" 1/2" � drive 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 24mm 26mm 27mm

D1 14,5 15,7 17 18,2 19,5 20,7 22 23,2 24,5 25,7 26,2 28,2 30,7 32 34,5 37 38,2

D2 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30

L 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 38 40

p/n 794 05 80 p/n 794 05 90 p/n 794 06 00 p/n 794 06 10 p/n 794 06 20 p/n 794 06 30 p/n 794 06 40 p/n 794 06 50 p/n 794 06 60 p/n 794 06 70 p/n 794 06 80 p/n 794 06 90 p/n 794 07 10 p/n 794 07 20 p/n 794 07 40 p/n 794 07 60 p/n 794 07 70

Socket hexagonal with plastic insert "Impact"

1/2" � drive For the protection of the wheel bolt surfaces and rims of aluminium wheels. D1 D2 L t 17mm 26 30 80 14 p/n 794 16 70 19mm 29 30 80 16 p/n 794 16 90 21mm 31 30 80 20 p/n 794 17 10

Socket hexagonal "Impact"

1/2" � drive, double hexagonal, double depth Long, thin walled version for wheel nuts. 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 21mm 22mm 24mm 27mm

J 26

D1 16 16 18 19 20 22 23 24 25 27 29 30 33 36

D2 25 25 25 25 25 29 30 26 30 29 30 30 30 30

L 80 80 80 80 80 80 80 80 80 80 80 80 80 80

t 10 11 12 13 14 17 16 26 18 30 21 22 24 27

p/n 794 11 00 p/n 794 11 10 p/n 794 11 20 p/n 794 11 30 p/n 794 11 40 p/n 794 11 50 p/n 794 11 60 p/n 794 11 70 p/n 794 11 80 p/n 794 11 90 p/n 794 12 10 p/n 794 12 20 p/n 794 12 40 p/n 794 12 70

Ball joint socket hexagonal "Impact"

3/8" ďż˝ drive 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm 18 mm 19 mm 22 mm 24 mm

57 mm long 57 mm long 57 mm long 57 mm long 59 mm long 59 mm long 59 mm long 59 mm long 61 mm long 61 mm long 61 mm long 63 mm long

p/n 782 61 00 p/n 782 61 10 p/n 782 61 20 p/n 782 61 30 p/n 782 61 40 p/n 782 61 50 p/n 782 61 60 p/n 782 61 70 p/n 782 61 80 p/n 782 61 90 p/n 782 62 20 p/n 782 62 40

Ball joint socket model "D" set 10 pcs

p/n 781 20 50

Ball joint socket hexagonal "Impact" 1/2" ďż˝ drive

13 mm 68 mm long 14 mm 70 mm long 15 mm 70 mm long 16 mm 70 mm long 17 mm 70 mm long 18 mm 70 mm long 19 mm 75 mm long 21 mm 75 mm long 22 mm 75 mm long Ball joint socket set 9 pcs

p/n 782 71 30 p/n 782 71 40 p/n 782 71 50 p/n 782 71 60 p/n 782 71 70 p/n 782 71 80 p/n 782 71 90 p/n 782 72 10 p/n 782 72 20 p/n 782 71 00

Socket hexagonal "Impact" 3/4" ďż˝ drive 17 mm 19 mm 22 mm 24 mm 26 mm 27 mm 30 mm 32 mm 33 mm 34 mm 36 mm 38 mm 41 mm 42 mm 46 mm

D1 30,6 32,9 37 39,2 41,3 43 47 49,2 50 51,3 53,5 56,3 61 61,3 67

D2 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44

L 50 50 50 50 50 50 53 56 56 56 56 57 57 57 60

p/n 796 01 70 p/n 796 01 90 p/n 796 02 20 p/n 796 02 40 p/n 796 02 60 p/n 796 02 70 p/n 796 03 00 p/n 796 03 20 p/n 796 03 30 p/n 796 03 40 p/n 796 03 60 p/n 796 03 80 p/n 796 04 10 p/n 796 04 20 p/n 796 04 60

J 27

Socket hexagonal extra long "Impact" 3/4" � drive 17mm 19mm 20mm 21mm 22mm 24mm 26mm 27mm 30mm 32mm 33mm 34mm 35mm 36mm 38mm 41mm 46mm

D1 30 32 34 35 37 39,2 41,3 42,5 47 49,2 49,2 51 52,5 54,5 56 60 66,3

D2 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44

L 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102

t 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77

p/n 796 11 70 p/n 796 11 90 p/n 796 12 00 p/n 796 12 10 p/n 796 12 20 p/n 796 12 40 p/n 796 12 60 p/n 796 12 70 p/n 796 13 00 p/n 796 13 20 p/n 796 13 30 p/n 796 13 40 p/n 796 13 50 p/n 796 13 60 p/n 796 13 80 p/n 796 14 10 p/n 796 14 60

Socket double hexagonal "Impact" 3/4" � drive

example Type : MB Atego leaf spring U-bolt, nut / lock nut Socket "Impact" 17mm x 50 mm long Socket "Impact" 19mm x 50 mm long Socket "Impact" 32mm x 53 mm long Socket "Impact" 30mm x 100 mm long Socket "Impact" 32mm x 100 mm long

p/n 796 51 70 p/n 796 51 90 p/n 796 53 20 p/n 796 63 00 p/n 796 63 20

Socket hexagonal thin walled "Impact" 3/4" � drive 22mm 24mm 27mm 30mm 32mm 33mm 36mm

J 28

D1 36 38 40 46 48 50 51,2

D2 44 44 44 44 44 44 44

L 102 102 102 102 102 102 102

t 77 77 77 77 77 77 77

p/n 796 22 20 p/n 796 22 40 p/n 796 22 70 p/n 796 23 00 p/n 796 23 20 p/n 796 23 30 p/n 796 23 60

Socket hexagonal "Impact" 1"� drive 19mm 21mm 22mm 24mm 27mm 28mm 29mm 30mm 32mm 33mm 35mm 36mm 38mm 41mm 42mm 46mm 50mm 55mm 60mm 65mm 85mm

D1 35,3 37,8 39 41,5 45,3 46,5 47,5 49 51,5 53 55,3 57 59,5 63,5 63,5 69,5 74,5 81 87 93,5 117,8

D2 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 86

L 57 57 57 57 57 57 57 62 62 62 62 62 65 66 66 70 70 75 75 75 90

p/n 797 01 90 p/n 797 02 10 p/n 797 02 20 p/n 797 02 40 p/n 797 02 70 p/n 797 02 80 p/n 797 02 90 p/n 797 03 00 p/n 797 03 20 p/n 797 03 30 p/n 797 03 50 p/n 797 03 60 p/n 797 03 80 p/n 797 04 10 p/n 797 04 20 p/n 797 04 60 p/n 797 05 00 p/n 797 05 50 p/n 797 06 00 p/n 797 06 50 p/n 797 08 50

Socket hexagonal extra long "Impact" 1"� drive 22mm 24mm 27mm 30mm 32mm 33mm 34mm 36mm 41mm 46mm 48mm 50mm 65mm

D1 39,5 42 46 49,5 52 53 54 57 63,5 69,5 71,5 74,5 92,8

D2 54 54 54 54 54 54 54 54 54 54 54 54 54

L 108 108 108 108 108 108 108 108 108 108 108 108 108

t 79 79 79 79 79 79 79 79 79 79 79 79 79

p/n 797 12 20 p/n 797 12 40 p/n 797 12 70 p/n 797 13 00 p/n 797 13 20 p/n 797 13 30 p/n 797 13 40 p/n 797 13 60 p/n 797 14 10 p/n 797 14 60 p/n 797 14 80 p/n 797 15 00 p/n 797 16 50

Socket hexagonal thin walled "Impact" 1"� drive 22mm 24mm 27mm 30mm 32mm 33mm 34mm 36mm

D1 36 38 40 46 48 49 51 53

D2 54 54 54 54 54 54 54 54

L 108 108 108 108 108 108 108 108

t 79 79 79 79 79 79 79 79

p/n 797 22 20 p/n 797 22 40 p/n 797 22 70 p/n 797 23 00 p/n 797 23 20 p/n 797 23 30 p/n 797 23 40 p/n 797 23 60

J 29

Socket hexagonal 270 mm long "Impact"

1" � drive With continuous drilling, for extremely low-lying bolts. Ø outside length 27mm 45mm 270mm p/n 798 02 70 30mm 48mm 270 mm p/n 798 03 00 32mm 51mm 270 mm p/n 798 03 20 33mm 54mm 270 mm p/n 798 03 30 34mm 55 mm 270 mm p/n 798 03 40 36mm 56 mm 270 mm p/n 798 03 60

E profile socket "Impact" 1/2" � drive

Socket E 10 x 38 mm long Socket E 12 x 38 mm long Socket E 12 x 80 mm long* Socket E 14 x 38 mm long Socket E 14 x 80 mm long* Socket E 16 x 38 mm long Socket E 18 x 38 mm long Socket E 20 x 38 mm long * Type :

p/n 788 21 00 p/n 788 21 20 p/n 788 61 20 p/n 788 21 40 p/n 788 61 40 p/n 788 21 60 p/n 788 21 80 p/n 788 22 00

MB C / E class drive shaft screws

E profile socket extra long "Impact" 3/4" � drive x 110 mm long E profile socket E 18 E profile socket E 20 E profile socket E 22 E profile socket E 24

p/n 606 28 18 p/n 606 28 20 p/n 606 28 22 p/n 606 28 24

Hex bit socket "Impact" Application samples Type : MB brake disks / lining Audi, VW drive shaft central screw Hex bit socket 12mm x 61 x 1/2" � drive Hex bit socket 14mm x 61 x 1/2" � drive Hex bit socket 17mm x 61 x 1/2" � drive Hex bit socket 19mm x 61 x 1/2" � drive Hex bit socket 12mm x 76 x 3/4" � drive Hex bit socket 14mm x 76 x 3/4" � drive Hex bit socket 17mm x 76 x 3/4" � drive Hex bit socket 19mm x 76 x 3/4" � drive

p/n 791 10 12 p/n 791 10 14 p/n 791 10 17 p/n 791 10 19 p/n 796 11 12 p/n 796 11 14 p/n 796 11 17 p/n 796 11 19

Socket extra long "Impact" 110 mm Special socket size 22mm. This set contains a 22mm socket as required for example on the Mercedes A class models. Apart from this special size the usual sizes of 17, 19 and 21mm are included in the set. Socket extra long "Impact" set 1/2" X-large in a plastic box

J 30

p/n 994 16 40

Stud puller model S For screwing in and out of studs and screws with or without threads. Stud-Ø 2,5 mm 3,5 mm 4 mm 5 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 10,5 mm 12 mm 14 mm 16 mm 18 mm 20 mm 22 mm 24 mm 27 mm 30 mm

Lift S -Ø 24 mm 24 mm 24 mm 24 mm 24 mm 24 mm 24 mm 24 mm 28 mm 28 mm 28 mm 28 mm 34 mm 34 mm 48 mm 48 mm 48 mm 48 mm 63 mm 63 mm

L 65 mm 65 mm 65 mm 65 mm 65 mm 65 mm 65 mm 65 mm 75 mm 75 mm 75 mm 75 mm 75 mm 75 mm 100 mm 100 mm 100 mm 100 mm 125 mm 125 mm

� drive 1/4" 1/4" 1/4" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

p/n 113 10 25 p/n 113 10 35 p/n 113 10 40 p/n 113 10 50 p/n 113 10 55 p/n 113 10 60 p/n 113 10 70 p/n 113 10 80 p/n 113 10 90 p/n 113 11 00 p/n 113 11 10 p/n 113 11 20 p/n 113 11 40 p/n 113 11 60 p/n 113 11 800 p/n 113 12 000 p/n 113 12 200 p/n 113 12 400 p/n 113 12 700 p/n 113 13 000

Lift S 1 set 3 pcs in a plastic case (6 - 8 - 10 mm)

p/n 113 00 10

Lift S 2 set 4 pcs in a plastic case (6 - 8 - 10 - 12 mm)

p/n 113 00 20

Screw extractor pins model UF With these extractor pins the front square is twisted 90° and the intermediate flanks are hollowed out so that no material is displaced when hitting them in and the screw does not block further. The 16 piece set also includes drill fitting drill sockets. These drill sockets are stepped so they can be used both for protruding and sunken screw remains. These special drill sockets are also separately available e.g. for set p/n 110 00 00. Screw extractor pins lift UF set 4 pcs size 1 - 4 p/n 114 00 0F Screw extractor set 16 pcs lift UF with special drill sockets and drills

p/n 114 01 5F

J 31

Screw extractor model B Special screw extractor set made from special steel for removing torn off screws and pins from 5 - 16 mm or 3/16" - 5/8". Applicable up to a depth of 25 mm. No expanding of the hole and no damage to the thread. Mode of operation: Drill with drill socket, hammer in the extractor pin and screw out with the nut. Extractor pins Size for thread 1 M 5-M 7 2 M 8-M 10 3 M 12 4 M 14 5 M 16

pin-Ø mm/" 3,2 (1/8") 4,8 ( 3/16") 6,4 (1/4") 8,0 (5/16") 8,7 (11/32")

Extractor nut Size drill-Ø for for mm pin size 1 3,2 1 2 4,6 2 3 6,4 3 4 8,0 4 5 8,7 5 HSS drill Size Ø mm 1 3,2~1/8" 2 4,6~3/16" 3 6,4~1/4" 4 8,0~5/16" 5 8,7~11/32"

mm screw 10 11 13 14 17

socket-Ø size 1, 2, 3, 4 size 5, 6, 7 size 8 size 9 size 10

Drill sockets Size outside Ø 1 7 2 8 3 9 4 10 5 11 6 12 7 13 8 14 9 15 10 17

l mm 60 70 78 83 94

p/n 110 30 10 p/n 110 30 20 p/n 110 30 30 p/n 110 30 40 p/n 110 30 50

l mm 16 16 16 16 16

p/n 110 20 10 p/n 110 20 20 p/n 110 20 30 p/n 110 20 40 p/n 110 20 50

l mm 65 86 101 117 125

p/n 110 10 10 p/n 110 10 20 p/n 110 10 30 p/n 110 10 40 p/n 110 10 50

Inner Ø 1/8" 1/8" 1/8" 1/8" 3/16" 1/l 6" 1/l 6" 1/4" 5/16" 11/32"

Screw extractor set complete M 5 - M 16

p/n 110 40 10 p/n 110 40 20 p/n 110 40 30 p/n 110 40 40 p/n 110 40 50 p/n 110 40 60 p/n 110 40 70 p/n 110 40 80 p/n 110 40 90 p/n 110 41 00 p/n 110 00 00

Bolt Twister Size 2 – 10 32 mm lg., 3/8"  drive Sockets made from high-strength special steel with self fixing, conical special profile. For the release of screws with damaged female hexagon, XZN and T profiles Size 2 for M5 Size 6 for M10 - M12 Size 3 for M6 Size 8 for M14 - M16 Size 4 for M8 Size 10 for M18 - M20 Bolt Twister 6 pcs on a rail

J 32

p/n 731 56 00

Hex ballpoint t-handle key 2,0 2,5 3,0 4,0 5,0 6,0

blade length grip length 100 mm 56 mm 100mm 56 mm 100 mm 56 mm 153 mm 56 mm 153 mm 78 mm 153 mm 78 mm

p/n 961 00 20 p/n 961 00 25 p/n 961 00 30 p/n 961 00 40 p/n 961 00 50 p/n 961 00 60

Hex ballpoint T-handle key set 6 pcs

p/n 961 00 00

Impact driver set

1/2" â&#x2013;Ą and 5/16" hexagonal drive Robust, impact driver system. For the loosening (and tightening) of seized screws. Max impact approx. 120 Nm. Impact driver set 6 pcs in a steel box

p/n 523 50 00

Reduction adapter Acceptance of hexagon bits square 1/4" 3/8" 3/8" 1/2" 1/2"

hexagon 1/4" 1/4" 5/16" 1/4" 5/16"

length 25 mm 31 mm 31 mm 38 mm 38 mm

p/n 792 80 10 p/n 793 80 10 p/n 793 80 20 p/n 794 80 10 p/n 794 80 20

Philips bits 1/4" hexagon drive Size 1 x 25 mm Size 2 x 25 mm

p/n 531 01 00 p/n 531 02 00

size 3 x 25 mm size 4 x 32 mm

Philips bit set 4 pcs

p/n 531 03 00 p/n 531 04 00 p/n 531 20 00

Philips bits 5/16" hexagon drive Size 1 x 32 mm Size 2 x 32 mm

p/n 541 01 00 p/n 541 02 00

size 3 x 32 mm size 4 x 32 mm

Philips bit set 4 pcs

p/n 541 03 00 p/n 541 04 00 p/n 541 20 00

Hex bits 1/4" hexagon drive 3 mm x 25 mm p/n 532 03 00 4 mm x 25 mm p/n 532 04 00 5 mm x 25 mm p/n 532 05 00 Hex bit set 6 pcs

6 mm x 25 mm 8 mm x 25 mm 10 mm x 25 mm

p/n 532 06 00 p/n 532 08 00 p/n 532 10 00 p/n 532 20 00

J 33

Pozidrive bits 1/4" hexagon drive Size 1 x 25 mm Size 2 x 25 mm

p/n 535 01 00 p/n 535 02 00

size 3 x 25 mm size 4 x 32 mm

Pozidrive bits set 4 pcs

p/n 535 03 00 p/n 535 04 00 p/n 535 20 00

Pozidrive bits 5/16" hexagon drive Size 1 x 32 mm Size 2 x 32 mm

p/n 545 01 00 p/n 545 02 00

size 3 x 32 mm size 4 x 32 mm

Pozidrive bits set 4 pcs

p/n 545 03 00 p/n 545 04 00 p/n 545 20 00

T profile bits 1/4" hexagon drive T 6 x 25 mm T 7 x 25 mm T 8 x 25 mm T 9 x 25 mm T 10 x 25 mm T 15 x 25 mm

p/n 534 00 60 p/n 534 00 70 p/n 534 00 80 p/n 534 00 90 p/n 534 01 00 p/n 534 01 50

T 20 x 25 mm T 25 x 25 mm T 27 x 25 mm T 30 x 25 mm T 40 x 25 mm

T profile bits set 11 pcs

p/n 534 02 00 p/n 534 02 50 p/n 534 02 70 p/n 534 03 00 p/n 534 04 00 p/n 534 30 50

T profile bits 5/16" hexagon drive T 20 x 35 mm T 25 x 35 mm T 27 x 35 mm T 30 x 35 mm

p/n 544 02 00 p/n 544 02 50 p/n 544 02 70 p/n 544 03 00

T 40 x 35 mm T 45 x 35 mm T 50 x 35 mm T 55 x 35 mm

T profile bits set 8 pcs

p/n 544 04 00 p/n 544 04 50 p/n 544 05 00 p/n 544 05 50 p/n 544 20 50

XZN bits 5/16" hexagon drive M 6 x 28 mm M 8 x 28 mm

p/n 547 06 00 p/n 547 08 00

M 12 x 36 mm M 14 x 38 mm

p/n 547 12 00 p/n 547 14 00

Ratchet ring spanner offset 135 mm long. Special offset reversible ratchet ring spanner. For the acceptance of all bits with 1/4" and 5/16" hexagon drive for work in hard to reach places (e.g. loudspeaker installation) Ratchet ring spanner offset

J 34

p/n 703 57 00

Flexible grabber 450 mm long. Flexible gripping tool with spring for small articles up to 30mm diameter. Flexible grabber

p/n 526 00 30

Telescope magnet 6 mm Ø, length: 140 till 590 mm . With holding clip. Telescope magnet

p/n 526 01 00

Force pliers set VDE tested (German Association for Electrical, Electronic & Information Technologies) Side cutting pliers and combination pliers Equipped with high-quality " formed 2 components grips.

" pliers with ergonomically

Contents: • Force combination pliers 180 mm - American model - Optimum power transmission because of improved leverage - Cutting edges additionally induction hardened - For hard and soft wires - Tool steel, drop-forged, oil-hardened • Side cutter 160 mm - Induction hardened precision cutting edges - Wave cross section for long lasting sharpness, patented - For hard and soft wires - Optimum power transmission because of improved leverage - Special tool steel Force pliers set 2 pcs

p/n 925 01 20

Double joint pliers set Pointed (straight/45°) and flat-nose pliers, approx. 300 mm long Special double joint pliers for hard to reach places, e.g. on MB commercial vehicles, with driving cab lifted to loosen electrical system plug at the engine and body. Because of the double joint the pliers need little room to open for seizing plugs, pins and the like (see picture), with Plexiglas pipe. Double joint pliers set 3 pcs

p/n 127 03 000

Spark plug plug double joint release pliers 45° 6 and 12 mm round, 320 mm long Spark plug pliers with double joint for low-lying and with hard to reach spark plugs. Because of the double joint the pliers need little room to open for seizing. Type:

e.g. MB R class V6 and V8 spark plug plugs

Spark plug double joint release pliers 2 pcs

p/n 604 02 700

J 35

Special flat-nose pliers Special flat-nose pliers long straight Special flat-nose pliers long S form Special flat-nose pliers long 45° form Special flat-nose pliers long 90° form Special flat-nose pliers set 4pcs long version

p/n 927 01 10 p/n 927 01 30 p/n 927 01 50 p/n 927 01 90 p/n 927 00 00

Circlip pliers American special steel - for inner and outer circlips Size 00 01 02 * 10 * 11 * 12 * 20 * 21 * 22 30 31 32

length 150 145 140 150 145 140 215 210 200 245 240 230

axle Ø 3-10 3-10 3-10 7-25 7-25 7-25 18-60 18-60 18-60 40-100 40-100 40-100

points straight 45° 90° straight 45° 90° straight 45° 90° straight 45° 90°

points Ø 0,96 mm 0,96 mm 0,96 mm 1,2 mm 1,2 mm 1,2 mm 1,8 mm 1,8 mm 1,8 mm 2,3 mm 2,3 mm 2,3 mm

Circlip pliers set 6 pcs in a plastic case* Circlip pliers set 12 pcs in a plastic case

p/n 122 40 00 p/n 122 50 00 p/n 122 60 00 p/n 122 40 10 p/n 122 50 10 p/n 122 60 10 p/n 122 40 20 p/n 122 50 20 p/n 122 60 20 p/n 122 40 30 p/n 122 50 30 p/n 122 60 30 p/n 122 42 00 p/n 122 45 00

Circlip pliers For inner and outer circlips. Circlip pliers set 11 pcs in a plastic case

p/n 122 40 60

Multi-function two-arm puller Size 1 work range 13 mm - 36 mm Size 2 work range 24 mm - 47 mm The special design of the puller hooks and puller bridge offers the user a work range from 13 mm to 47 mm with only two pullers of small design. With the loosening of the two lateral hex screws and reversing the medium pressure spindle many possibilities are given to pull bearings, wiper arms, battery clamps and the likes. Two-arm puller with changeable bridge size 1

p/n 904 00 40

Two-arm puller with changeable bridge size 2

p/n 904 00 50

Two-arm puller set with changeable bridge size 1 + 2 p/n 904 00 45

J 36

Special three leg puller Working range 19 mm - 45 mm with screwable fixing sleeve This three leg puller has a very large work range and a substantial advantage for fixing with a screwable fixing collar which holds the puller legs in position. Universal ranges of application and an indispensable aid when taking the bearings off from the anchors in electric motors make this an ideal tool for electrical workshops, Bosch service centres and similar specialized enterprises. Three leg puller "micro puller" with fixing sleeve p/n 904 00 00

Two leg puller size 2 Span 50 mm/clamping depth 40 mm Smallest puller with self pressing legs. Easy pulling off of small work pieces such as terminal clamps and small bearings on electrical motors etc. Two leg puller size 2

p/n 104 00 10

Puller model GU With the shears effect the stress of the adjustable legs increases during the pulling procedure. The legs are milled claw-like and pointed for use on narrow gaps. Size 1 2 3

span 6 - 100 mm 10 x 140 mm 15 x 140 mm

clamping depth 85 mm 120 mm 155 mm

p/n 104 55 10 p/n 104 55 20 p/n 104 55 30

Three leg puller Span 70 mm / clamping depth 65 mm. For terminal clamps, small gear wheels, ball bearing etc. Three leg puller

p/n 104 70 00

J 37

Three leg puller Due to the clamping nut the pulling legs are fixed at the work piece and so slipping of the legs is prevented. Universally applicable e.g. for transmission, starter and generator bearings. Size 1 and 2 with impact hammer e.g. for the disassembly of wheel bearing hub caps. Slide hammer size 2 0,7 kg M10 inner thread

p/n 103 02 10

Three leg puller with spindle Size 1 Ø 10 - 60 mm Size 2 Ø 15 - 70 mm Size 3 Ø 20 - 100 mm

p/n 104 06 15 p/n 104 06 25 p/n 104 06 35

Three leg puller with slide hammer 700g Size 1S Ø 10 - 60 mm Size 2S Ø 15 - 70 mm Size 3S Ø 20 - 100 mm

p/n 104 07 10 p/n 104 07 20 p/n 104 07 30

Puller model F Die forged two leg puller with clamp. The legs are pressed by the clamp behind the part which should be removed, thus slipping is prevented. Clamp is removable. Size 1 2 3

span 70 mm 100 mm 140 mm

clamping depth 94 mm 100 mm 150 mm

p/n 104 30 10 p/n 104 30 20 p/n 104 30 30

Puller model G Height adjustable turning puller for the loosening or removal of concise fitting parts such as axle bearings, pinion, bearing rings etc. It is possible to use the puller in confined spaces due to the special thin jaws. The clamping collar prevents slipping of the jaws. Size 1 2 3 4

J 38

span 100 mm 150 mm 150 mm 150 mm

clamping depth 170 mm 270 mm 330 mm 425 mm

p/n 104 50 10 p/n 104 50 20 p/n 104 50 30 p/n 104 50 40

Puller model E Forged pullers, CV-steel with specially hardened spindle and ball. By reversing the legs this can be used as an internal or external puller.

Two leg puller model E 2 Size 1 2 3 4 5 6 7 8

span clamping depth leg 25 -.80 mm 100 mm 25 - 130 mm 100 mm 50 - 160 mm 150 mm 60 - 200 mm 150 mm 80 - 250 mm 200 mm 80 - 350 mm 200 mm 110 - 520 mm 200 mm 170 - 640 mm 225 mm

width 20 20 25 25 35 35 35 50

p/n 104 20 10 p/n 104 20 20 p/n 104 20 30 p/n 104 20 40 p/n 104 20 50 p/n 104 20 60 p/n 104 20 70 p/n 104 20 80

20 20 25 25

p/n 104 21 60 p/n 104 21 70 p/n 104 21 80 p/n 104 21 90

width 20 25 35 50 20 20 25 25 35 35 35 50 50 50

p/n 104 24 10 p/n 104 24 20 p/n 104 24 30 p/n 104 24 40 p/n 104 25 10 p/n 104 25 15 p/n 104 25 17 p/n 104 25 20 p/n 104 25 30 p/n 104 26 30 p/n 104 27 30 p/n 104 25 40 p/n 104 26 40 p/n 104 27 40

Three leg puller model E 3 1 2 3 4

25 - 80 mm 25 - 130 mm 25 - 160 mm 25 - 200 mm

100 mm 100 mm 150 mm 150 mm

Replacement legs ( 1 piece ) Size 1 2 3 4 5 6 7 12 13 23 33 14 24 34

Span clamping depth leg 100 mm size 1 + 2 150 mm size 3 + 4 200 mm size 5 - 7 225 mm size 8 200 mm size 1 + 2 250 mm size 1 + 2 220 mm size 3 + 4 300 mm size 3 + 4 300 mm size 5 + 7 400 mm size 5 + 7 500 mm size 5 + 7 300 mm size 8 400 mm size 8 500 mm size 8

Replacement legs without clamp for model E Size 1 Size 2 Size 3 Size 4

20 mm wide for size 1 and 2 25 mm wide for size 3 and 4 35 mm wide for size 5, 6 and 7 50 mm wide for size 8

p/n 104 24 11 p/n 104 24 21 p/n 104 24 31 p/n 104 24 41

J 39

Puller Krallex model F / S Two and three legs Span 25 - 130 mm Legs 150 / 200 / 250 mm long Jaw thickness 2,0 / 3,6 mm Outer and inner puller with slim legs particularly suitable for small spaces. As a result of the different leg lengths and different jaw forms a large area of application is possible. Type :

Universal

1 x two leg bridge 25-130 mm 1 x three leg bridge 25-130 mm 1 x spindle 210 mm long 1 x spindle with T-bar grip 250 mm long 3 x leg size 1 100 mm long, with jaw F 2,0 3 x leg size 2 200 mm long, with jaw F 2,0 3 x leg size 3 250 mm long, with jaw F 2,0 3 x jaw Krallex 3,6 thick x 27 mm wide 3 x jaw Krallex S 3,6 thick x 14 mm wide 1 x bracket Puller Krallex model F / S two and three leg in a steel box

p/n 104 22 20 p/n 104 88 80 p/n 104 23 20 p/n 104 98 70 p/n 104 88 91 p/n 104 88 92 p/n 104 88 93 p/n 104 25 55 p/n 104 25 53 p/n 104 98 95 p/n 104 98 10

Puller Krallex model D Two and three legs Span 50 - 160 mm Legs 150 / 220 / 300 mm long Jaw thickness 5,0 mm A heavy duty version for various applications. Outer and inner pullers with slim jaws are particularly suitable for small spaces. Type : Universal Two leg bridge 50 - 160 mm (just two leg puller) p/n 104 22 30 Three leg bridge 50 - 160 mm (just three leg puller) p/n 104 88 84 Spindle 210 mm long p/n 104 23 30 Leg 150 mm long ( with jaw 5,0) p/n 104 88 71 p/n 104 88 72 Leg 220 mm long ( with jaw 5,0) p/n 104 88 73 Leg 300 mm long ( with jaw 5,0) Puller Krallex model D2 two legs p/n 104 98 40 with 6 legs (2 each) Puller Krallex model D3 three legs p/n 104 98 30 with 9 legs (3 each)

J 40

Puller model Krallex Particularly slim ending puller hooks give extra grip to the pullers in tight pulling applications.

Two leg puller Model Krallex D Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2 3D 4D

20 - 80 25 - 130 50 - 160 60 - 200

100 100 150 150

M14 x 1,5 x 130 M14 x 1,5 x 130 G1/2“x 14Gg.x 210 G1/2“x 14Gg.x 210

17 17 22 22

3,6 3,6 5,0 5,0

27 27 40 40

104 88 55 104 88 65 104 88 70 104 88 75

Model Krallex F ( with extra slim legs ) Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2

20 - 80 25 - 130

100 100

M14 x 1,5 x 130 M14 x 1,5 x 130

17 17

2,0 2,0

27 27

104 88 40 104 88 45

Model Krallex S ( with narrow legs ) Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2

20 - 80 25 - 130

100 100

M14 x 1,5 x 130 M14 x 1,5 x 130

17 17

3,6 3,6

14 14

104 89 60 104 89 65

Three leg puller Model Krallex D Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2 3D 4D

25 - 80 25 - 130 50 - 160 50 - 200

100 100 150 150

M14 x 1,5 x 130 M14 x 1,5 x 130 G1/2“x 14Gg.x 210 G1/2“x 14Gg.x 210

17 17 22 22

3,6 3,6 5,0 5,0

27 27 40 40

104 88 83 104 88 87 104 88 90 104 88 95

Model Krallex F ( with extra slim legs ) Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2

25 - 80 25 - 130

100 100

M14 x 1,5 x 130 M14 x 1,5 x 130

17 17

2,0 2,0

27 27

104 89 40 104 89 45

Model Krallex S ( with narrow legs ) Size

Span mm

Clamping depth mm

Spindle Thread x length

Jaw thickn.

Jaw width

P/n

1 2

25 - 80 25 - 130

100 100

M14 x 1,5 x 130 M14 x 1,5 x 130

17 17

3,6 3,6

14 14

104 89 80 104 89 85

Jaw thickn.

Jaw width

P/n

3,6 3,6 3,6 5,0 5,0 5,0 2,0 2,0 2,0 3,6 3,6 3,6

27 27 27 40 40 40 27 27 27 14 14 14

104 88 61 104 88 62 104 88 63 104 88 71 104 88 72 104 88 73 104 8891 104 88 92 104 88 93 104 89 61 104 89 62 104 89 63

Jaw thickness tolerance

Jaw thickn.

Jaw width

P/n

+ / - 0,2 mm + / - 0,2 mm + / - 0,2 mm + / - 0,2 mm

3,6 5,0 2,0 3,6

27 40 27 14

104 25 55 104 25 60 104 25 50 104 25 53

Legs with jaw (1 piece) Size

For model

Clamping depth mm

For puller

1 2 3 1 2 3 1 2 3 1 2 3

Krallex Krallex Krallex Krallex D Krallex D Krallex D Krallex F Krallex F Krallex F Krallex S Krallex S Krallex S

100 200 250 150 220 300 100 200 250 100 200 250

size 1 + 2 size 1 + 2 size 1 + 2 size 3 + 4 size 3 + 4 size 3 + 4 size 1 + 2 size 1 + 2 size 1 + 2 size 1 + 2 size 1 + 2 size 1 + 2

Standard

Jaws for model Krallex / D / F / S Model

Krallex Krallex D Krallex F Krallex S

size 1 + 2 size 3 + 4 size 1 + 2 size 1 + 2

Krallex /

Krallex

J 41

Puller Krallex model F Two and three legs Span 25 - 100 mm Legs 100 mm lg. Jaw thickness 2,0 / 3,6 mm With quick-action clamping nut and particularly slim Krallex F puller jaws. The puller jaws permit the employment also in tight pulling situations. Due to the quick-action clamping nut the change from the 2-arm to the 3-arm bridge is rapidly accomplished and the setting of the puller is substantially simplified. Contents: Bridge 3 legs Bridge 2 legs Spindle 3 x legs with quick-action clamping nut Puller Krallex model F two and three legs in a plastic case

p/n 104 99 50

Hydraulic pull system Thrust force 12 t. - Fat hydraulic building block principle suitable for 2 -and 3-legged pullers. Special leg construction (the greater the pressure, the more stress on the legs). Contents: 1 x hydraulic spindle 12 t with thrust piece 1 x 2 leg bridge 1 x 3 leg bridge 3 x leg (span 50 - 100 mm, clamping depth 100 mm) 3 x leg (span 75 - 150 mm, clamping depth 150 mm) 3 x leg (span 100 - 200 mm, clamping depth 200 mm) 1 x spindle extension 50 mm long 1 x spindle extension 100 mm long 1 x spindle extension 150 mm long Hydraulic pull system 15 pcs Accessories: legs (span 75 - 150 mm, clamping depth 250 mm) legs (span 130 - 250 mm, clamping depth 250 mm)

p/n 104 16 50 p/n 104 16 20 p/n 104 16 30 p/n 104 17 10 p/n 104 17 20 p/n 104 17 30 p/n 104 18 60 p/n 104 18 70 p/n 104 18 80 p/n 104 15 00

p/n 104 18 30 p/n 104 18 40

Multi leg hub puller model P1 - P3 Strong version with pitch diameter Ă&#x2DC; up to 225 mm and axially mobile threaded bush with annular groove for the admission of 2 to 5 adjustable pulling legs. For the safe removal of wheel hubs. Type: passenger car universal Multi leg hub puller model P 1 3 legs Multi leg hub puller model P 2 4 legs Multi leg hub puller model P 3 5 legs

J 42

p/n 105 60 10 p/n 105 60 20 p/n 105 60 30

Extractor model NA Size Span min-max 2 65-115 mm 3 80-210 mm 4 100-295 mm 5 150-350 mm

Length extr. rod 150 mm 210 mm 315 mm 305 mm

Fitting to extractor NT 1+2 NT3 NT4 NT5

p/n 105 20 20 p/n 105 20 30 p/n 105 20 40 p/n 105 20 50

Separator NT Robust separator with sharp, tapered edges. Size 1 2 3 4 5

Span 10 - 60 mm 15 - 75 mm 35 -115 mm 40 -150 mm 48 -220 mm

Fitting to extractor NA 2 NA 2 NA 3 NA 4 NA 5

p/n 105 10 10 p/n 105 10 20 p/n 105 10 30 p/n 105 10 40 p/n 105 10 50

Extensions for extractor model NA Size NV 1 NV 2 NV 3

Length 100 mm 100 mm 100 mm

M M12 M 16 M 20x1,5

Fitting to extractor NA 2 NA 3 NA 4 + 5

p/n 105 30 10 p/n 105 30 20 p/n 105 30 30

Extractor Mod. NS Complete workshop set for separation and pulling in a sturdy steel box. Size 1 2 3 4 5

Extractor 1xNA 2 1xNA 2 1xNA 3 1xNA 4 1xNA 5

Extension 2xNV 1 2xNV 1 2xNV 2 2xNV 3 2xNV 3

Separator 1xNT 1 1xNT 2 1xNT 3 1xNT 4 1xNT 5

p/n 105 40 10 p/n 105 40 20 p/n 105 40 30 p/n 105 40 40 p/n 105 40 50

Internal extractor sets Compact sets with large clamping range. Split collets made from one source (particularly wear resistant). With even spreading for safe and careful extraction. These are suitable for ball bearings, - outer rings, sockets and seals. Set size 1 10 - 37 mm holes 5 collets size 1A, 2A, 3A, 4A, 5A counter stay size 1 and slide hammer 103 02 00 Set size 2 10 - 45 mm holes 6 collets size 1A, 2A, 3A, 4A, 5A , 6A and 1 counter stay size 1 Set size 5 15 - 75 mm holes 4 collets size 2A, 3A, E3, E7 counter stay size 2, thread adapter

p/n 104 97 01

p/n 104 97 02 p/n 104 97 10

J 43

Collets Split collets from one source (particularly wear resistant). With even spreading for safe and careful extraction. They are suitable for ball bearings, - outer rings, sockets and seals. Size Hole Ă&#x2DC; mm 0A 5-7 0B 7-9 0C 9-12 1A 10-13 1B 13-17 2A 14-19 2B 16-21 2C 18-23 3A 20-25 4A 25-30 5A 30-37 5B 35-42 6A 38-45 E3 25-40 E 7 40-75 E 8 70-115

Thread M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 R 3/8" R 3/8"

p/n 104 96 01 p/n 104 96 02 p/n 104 96 03 p/n 104 96 11 p/n 104 96 12 p/n 104 96 21 p/n 104 96 22 p/n 104 96 23 p/n 104 96 31 p/n 104 96 41 p/n 104 96 51 p/n 104 96 52 p/n 104 96 61 p/n 104 96 30 p/n 104 96 96 p/n 104 96 98

counter stay Size 1 2 3 4

For extractor 0A - 6A E7 + E8 E7 + E8 E7 + E8

Adapter thread M 10 R 3/8" R 3/8" R 3/8"

Spindle thread M 16x1,5 M 24x1,5 M 24x1,5 R1/2" 14G

Counter stay size 1 Counter stay size 2 Counter stay size 4

Reach 35- 75 mm 60-130 mm 60-210 mm 60-210 mm p/n 105 01 10 p/n 105 01 20 p/n 105 01 40

Pressure piece set ALU Versatile pressure piece set made from aluminium. The installation forces are transferred evenly and carefully so that damage to ball bearings, sockets, shaft seals etc is avoided. For use with a rubber or plastic hammer Contents: 1 handle 120 mm long with retaining screw 9 pressure pieces with outside Ă&#x2DC;: 40/ 44/ 50/ 59/ 63/ 65/ 72/ 76/ 81 Pressure piece set ALU 10 pcs

J 44

p/n 614 45 30

Vice soft jaws Width 140 mm Magnetic auxiliary jaws can be put on the vice jaws when needed. So it is possible to work on very sensitive parts. 1 pair aluminium soft jaws 1 pair aluminium prism soft jaws 1 pair aluminium soft jaws with rubber coating 1 pair aluminium soft jaws with fibber coating Vice soft jaws 4 pcs

p/n 701 00 10

Vice soft jaws set model 2 120 mm long with retaining magnet. The back magnets fix the protection jaws to the vice jaws. The special formed plastic jaws adapt to the form of the part and give it safe hold without damage. So very sensitive parts can be worked on. With special jaws for the disassembly/assembly of shock struts it is possible to clamp the struts without damage at an angle of 45째. 1 pair plastic soft jaws 1 pair aluminium shock strut soft jaws

p/n 946 17 60 p/n 946 12 00

Vice soft jaws set model 2, 2 pcs in a pouch

p/n 701 00 20

Lever set - commercial vehicles Lever set, developed for the special requirements of the commercial vehicle workshop. Ergonomic plastic handle, laid out for use with 2 hands. With a solid impact head for the highest demands. Continuous square special steel blade 16 x 16 mm, hardened and tempered, can be reground. Application e.g.: Leaf spring bolt eye Annul the rotary shaft seals in the wheel hub (special size 3) To install wheels onto a vehicle (special size 2) To examine ball joints and steering cross rods and steering side rods To check bushes for play Size 1 610 mm x 90째 Size 2 910 mm x 45째 Size 3 610 mm x 60째 Size 4 910 mm x straight Lever set 4 pcs

p/n 119 10 01 p/n 119 10 02 p/n 119 10 03 p/n 119 10 04 p/n 119 11 00

J 45

Hydraulic nut splitter Suitably for nuts 7 – 22mm , max load 5 t For removing de-threaded nuts

- Small effort necessarily - Slim build, so easy to work on hard to reach places - In addition the jaw is inductively hardened Hydraulic nut splitter Replacement jaw Anvil

p/n 118 50 00 p/n 118 50 10 p/n 118 50 20

Double action pumps extraction and pressure Volumes 125ml and 250ml Robust hand extraction pumps with double stroke. The pumps pump fluid with each movement; therefore there are no “no-load operation “pump strokes. The aluminium housing and plastic parts from which the pumps are manufactured, are suitable for liquids such as diesels, heating oil, engine oil, brake fluid, water and different coolants. ATTENTION these pumps are not to be used for petrol, acids and caustic solutions! Double-acting pump universal 125 ml volume aluminium housing with plastic hoses

p/n 80125125

Double-acting pump universal 250 ml volume aluminium housing with plastic hoses

p/n 80125250

Demagnetising block Demagnetising block

p/n 960 67 00

Impact gun 3/8"  butterfly Weight 950 g., about 150 mm long. 8 adjust steps, idling 9000 U/min, Torque max. 102 Nm Swivelling compressed air connector. Small, handy impact gun with practical operating jack for the direction of rotation choice. With its compact and light construction it is particularly suitably for work in the engine compartment e.g. for valve cover disassembly. Impact gun 3/8"  butterfly

J 46

p/n 923 53 00

Impact gun Silent Power Drive square Idling speed Fastening torque Release torque Weight Air pressure Air inlet:. Acoustic pressure

1/2" 7.000 rpm 880 Nm 990 Nm 1,95 kg 6,3 bar 1/4" 85 dB/A

A high-quality impact gun with every conceivable advantage for the modern workshop. The plastic housing, exhaust air downward silent power and huge torque distinguish this tool from others. With a very well balanced weight of 1.95 kg make this easy to use 1/2" Impact gun with 3 different speeds and a release of 990 Nm suitable for the highest requirements. With a double hammer blow action. Impact gun Silent Power 1/2" Silent Power

p/n 923 52 00S

Impact gun Drive square Spindle length Idling speed Output Weight Air pressure Air inlet:.

3/4" 1" 4.200 rpm 1.345 nm 5,2 kg 6,2 bar 3/8"

High performance, robust 3/4" Impact gun with excellent weight per horsepower ratio. 3 fastening and 3 release torques ensure a broad field of application. Exit air discharge is through the grasp downward. Impact gun 1

p/n 923 55 00

Impact gun "low noise" New generation A 1/2" Impact gun “GOLD" with ergonomic plastic housing making it easy to operate, it is the “low noise" version. Exhaust air downward, 3 performance levels with a maximum torque of 660 Nm. Impact gun "GOLD" low noise A 1/2" 660 NM p/n 923 52 50S

Impact gun "Silent Power" A 1 A 1" impact gun with a spindle length of 8". Unique “Silent Power" and an incredible maximum torque of 2430 Nm – so it is suitable for trucks, construction equipment etc. Impact gun "Silent Power" A 1" 2340 NM

p/n 923 56 00S

J 47

Compressed air rivet gun for rivets up to 6,4 mm, in a case A pneumatically operated rivet gun for rivets up to 6.4 mm Practical version in a plastic case Compressed air rivet gun. In a plastic case

p/n 924 76 00

Compressed air chisel hammer For Hex bits. Includes a special insert for jolting This standard compressed air device has been re-designed to become a helpful special tool. In connection with the production of a special chisel with a hexagonal drive, which has a V-type recess instead of a chisel point - and a commercial pneumatic hammer, these tools can be used to help during the disassembly of seized injectors. With our superior range of injector disassembly tools such as the special sets for MB, Renault, Fiat or PSA the air chisel can be used to directly jolt the seized injector. Chisel hammer set model S with 1 piece chisel insert for jolting seized injectors p/n 802 20 00 Special chisel hammer insert S8 for jolting seized injectors p/n 820 20 10

Pneumatic rivet drilling kit With replaceable inserts and drills The technologies in the use and processing of new materials and the connection techniques in the auto body bring new challenges for the repair, disassembly and assembly of steel sheet pieces. These include spot-welds, welds, adhesives, solder and of course rivets. In order to be able to drill out optimally and centrally the very hard and varying diameter large rivets during separation of sheet metals, this special pneumatic rivet drill set contains 3 replaceable centring inserts and 2 different large " RIVET â&#x20AC;&#x201C;DRILL-BIT" drills, which are exactly adapted to the standard commercially used rivets Pneumatic rivet drilling kit

J 48

p/n 825 05 45

Pneumatic one hand disc grinder This unique hand disc grinder functions in connection with fibre corundum grinding disks. The newly conceived 5" hole support disk permits a good view of the work surface and gives special air cooling of the work area. Further advantages are speed regulation, lightness and an ergonomically formed handle for easy use. Pneumatic one hand disc grinder "BELLA-VISTA" for 5 holes fibre corundum grinding disks. p/n 804 38 00

Pneumatic corner-grinder Idling speed: Output: Total length: Height: Weight: Air pressure: Air inlet:

15.000 U/min 0,85 PS/0,63 kW 350mm 65mm 1,1 kg 6,3 bar ¼“

The design of this corner cutter makes possible optimal work in hard to reach places on motor vehicles and locksmith's works. In particular corroded and idle turning screw connections can be cut through simply and easily for example: connecting rod and anti-roll bars, tie rods and tie rod ends as well as carrying joints (Ford, Opel or BMW). Exhaust screw connections can be separated just as easily, also wheel arches and the screw connections of many rear axle bushes which are hard to reach (in the Golf III the brake pressure regulator must be dismantled to do this). Pneumatic corner cutter

p/n 804 45 00

Cleaning pistol "TORNADOR " This simple air gun with “Tornador" - funnel attachment can be filled with any conventional cleaning agent and connected to compressed air. For hard to reach places such as radio consoles, lattices of risers, centre consoles, roof skies, seats and carpets simply everything in the vehicle can be cleaned without scrubbing. Simply hold the pistol with the funnel directly over the place to be cleaned and spray until the dirt has disappeared. Cleaning pistol "TORNADOR"

p/n 949 52 50

J 49

O-ring assortment 419 pcs A 419 piece O-ring set. The set covers O-rings of 3.0 mm inside diameters up to 50.0 mm. The rings have different strengths from 1.5 mm to 3.5 mm and are contained in different numbers of items ranging from 10 to 20 in the assortment O-ring assortment 419 pcs metric O-ring assortment 419 pcs inch

p/n 913 43 60 p/n 913 43 70

Grooved nut key UNI adjustable With 4 pair replaceable points This universal grooved nut key is universal applicable because of its adjustable range of 20mm to 90mm and its 4 pairs of screwed ends with diameters 2.5/4.0 mm 3.0/5.0 mm 6.0/8.0 mm and 7.0/11.0 mm. Predominantly for use with the repair of screw connections which have drillings, grooves or slots for stopping, releasing or tightening Grooved nut key UNI

p/n 940 13 90

Socket wrench set „Surface Drive“ 1/4" - 3/8" - 1/2" This set contains ¼”, 3/8” and ½” drives easily accessible in one handy carry case. Contained in the set are tools in profiles E-Torx, TX, hex, Philips and slotted heads. The ratchets are fine toothed equipped with ergonomic handles and a holding device. Socket wrench set „Surface Drive“150 pcs

J 50

p/n 740 01 60

Spot weld drill 3 fluted with multilayer alloy Solid tungsten carbide drill STC 8 x 44mm for maximum rigidity sheet metals (Usibor), which are used for example in the cross framework and side members, but partially in the door sills or A and B-columns in models from Daimler/Chrysler, Porsche, VW, Audi, BMW, Volvo, Peugeot and many others. For these extremely hard and tough sheet metals this high-tech drill has been specially developed as 3 fluted and has a completely new “multilayer” coating, with all the advantages of the conventional TiN, TiAIN + TiCN alloys combined. Replacement miller for SPEEDY 8,0 x 44 mm solid tungsten carbide, 3 fluted for „Spitznagel Drill“ p/n 270 61 05 Replacement miller for SPEEDY 8,0 x 44 mm solid tungsten carbide, 3 fluted for “Vario-Drill” p/n 270 61 10

Stepped drill " Gold " Long service life because of the titanium nitrite (Tin) coating. The hole diameter is readable by the laser scale in the slot. For the number of revolutions required approximate values for steel/CrNi (VA) are printed in a table in the lid of the steel sheet cartridge. With flat spot for burr free drilling of sheet metals, pipes and profiles up to 4 mm material thickness. Stepped drill size 1 Ø4 - 12 mm, 1 mm ascending p/n 280 24 00 Stepped drill size 1a Ø4 - 20 mm, 2 mm ascending p/n 280 24 50 Stepped drill size 2 Ø 6 - 30 mm, 2 mm ascending p/n 280 25 00 Stepped drill " Gold ", 3 pcs. in steel box p/n 280 28 50 Stepped drill size 3 Ø 9 - 36 mm, 3 mm ascending p/n 280 26 00 Stepped drill size 4 Ø 30 - 40 mm, 1 mm ascending p/n 280 30 40

Hole cutter Conical special sheet metal drills from HSS for burr-free drilling and reaming. (Steel sheets, stainless steel, V2A, non-ferrous metals, plastics, wood). Also available a special machine cutting paste ZSW for the protection and preservation of the drills performance. Material:

Non-ferrous

Steel ST 14 / 37

Material thickness Size TITAN 1 TITAN 2 TITAN 3 TITAN 6 TITAN 6 A TITAN 10 Machine cutting paste

Ø / mm Shank-Ø mm 3-14,5 6 8-20,5 8 16-30,5 9 5-30,5 10 5-30,5 8 29-52,0 12

0,1-5 mm rpm 2000-1500 1500-800 1000-500 1000-500 1000-500 300-200

0,1-3 mm rpm 800-500 600-300 400-200 400-200 400-200 200-100

ZSW

high-grade steel stainless steel V2 0,1-1,5 mm rpm 600-400 400-200 200-100 200-100 200-100 80- 50

Plastics

- 10 mm rpm 3000-2000 2000-1500 1500-1000 1500-1000 1500-1000 500-200

p/n 280 00 10 280 00 20 280 00 30 280 00 60 280 11 60 280 01 00 280 20 00

The indicated rpm were determined with test drillings in a controlled environment. They serve only as a non-committal indication of performance.

L 01

Hand tap set 1 M 3 - M 12 DIN 352 HSS Contents: 7 sets of heavy duty hand taps, consisting of 1 pilot a middle and a finishing tap each. Hand tap set 1 in a steel box

p/n 230 00 10

Tap and Die set 4 Contents: 7 sets of heavy duty hand taps, consisting of 1 pilot a middle and a finishing tap each, DIN 352, 7 HSS Dies M 3-M12 in equal height, outside diameter 25 x 9 mm. Also: 1 die stock, 1 tap wrench 1 screwdriver Tap and die set 4

p/n 230 00 40

Tap extensions Hardened universal extensions with inside and outside square as per DIN 10 for hand taps and reamers.

ďż˝ size 2,1 2,4 2,7 3 3,4 3,8 4,3 4,9 5,5 6,2

L 02

Metric M1-2,6 M3 M3,5 M4 - 4,5

M5-8 M9-10 M11

P/N 267 02 10 267 02 40 267 02 70 267 03 00 267 03 40 267 03 80 267 04 30 267 04 90 267 05 50 267 06 20

ďż˝ size 7 8 9 10 11 12 13 14,5 16 18

Metric M12 M13-16 M18 M 20 M 22-26 M 27-28 M 30-32

P/N 267 07 00 267 08 00 267 09 00 267 10 00 267 11 00 267 12 00 267 13 00 267 14 50 267 16 00 267 18 00

HSS-hand taps HSS heavy duty hand taps (high abrasion resistance) for high cutting velocities, with relief ground profile and precision thread. HSS-hand tap metric DIN 352 Thread-Ø P/N 3 piece sets Thread-Ø M1 M1,1 M1,2 M1,4 M1,6 M1,7 M1,8 M2 M2,2 M2,3 M2,5 M2,6 M3 M3,5 M4 M4,5 M5 M5,5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52

Speed. / mm 0,25 0,25 0,25 0,3 0,35 0,35 0,35 0,4 0.45 0,4 0,45 0,45 0,5 0,6 0,7 0,75 0,8 0,9 1 1 1,25 1,25 1.5 1,5 1.75 2 2 2,5 2.5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5

P/N. 230 71 00 230 71 10 230 71 20 230 71 40 230 71 60 230 71 70 230 71 80 230 72 00 230 72 20 230 72 30 230 72 50 230 72 60 230 73 00 230 73 50 230 74 00 230 74 50 230 75 00 230 75 50 230 76 00 230 77 00 230 78 00 230 79 00 230 81 00 230 81 10 230 81 20 230 81 40 230 81 60 230 81 80 230 82 00 230 82 20 230 82 40 230 82 70 230 83 00 230 83 30 230 83 60 230 83 90 230 84 20 230 84 50 230 84 80 230 85 20

HSS-hand tap metric fine DIN 2181 2 piece sets Thread-Ø M 3 x 0,35 M 4 x 0,35 M 4 x 0,5 M 5 x 0,5 M 6 x 0,5 M 8 x 0,5 M 10 x 0,5 M 6 x 0,75 M 7 x 0,75 M 8 x 0,75 M 9 x 0,75 M 1 0 x 0,75 M 12 x 0,75 M 14 x 0,75

P/N 232 50 30 232 50 40 232 60 40 232 60 50 232 60 60 232 60 80 232 61 00 232 70 60 232 70 70 232 70 80 232 70 90 232 71 00 232 71 20 232 71 40

M8x1 M9x1 M10 x 1 M 11 x 1 M 12 x 1 M 13 x 1 M 14 x 1 M 15 x 1 M 16x 1 M 18x 1 M 20x 1 M 22x 1 M 24 x l M 25 x 1 M 26 x 1 M 27 x 1 M 28 x 1 M 30 x 1 M 10 x 1,25 M 11 x 1,25 M 12 x 1,25 M 14 x 1,25 M 16 x 1,25 M 18 x 1,25 M 20 x 1,25 M 12 x 1,5 M 13 x 1,5 M 14 x 1,5 M 15 x 1,5 M 16 x 1,5 M 18 x 1,5 M 20 x 1,5 M 21 x 1,5 M 22 x 1,5 M 23 x 1,5 M 24 x 1,5 M 25 x 1,5 M 26 x 1,5 M 27 x 1,5 M 28 x 1,5 M 29 x 1.5 M 30 x 1,5 M 32 x 1,5 M 33 x 1,5 M 34 x 1,5 M 35 x 1,5 M 36 x 1,5 M 38 x 1,5 M 39 x 1,5 M 40 x 1,5 M 42 x 1,5 M 45 x 1,5 M 48 x 1,5 M 50 x 1,5 M 52 x 1,5

232 80 80 232 80 90 232 81 00 232 81 10 232 81 20 232 81 30 232 81 40 232 81 50 232 81 60 232 81 80 232 82 00 232 82 20 232 82 40 232 82 50 232 82 60 232 82 70 232 82 80 232 83 00 232 91 00 232 91 10 232 91 20 232 91 40 232 91 60 232 91 80 232 92 00 233 01 20 233 01 30 233 01 40 233 01 50 233 01 60 233 01 80 233 02 00 233 02 10 233 02 20 233 02 30 233 02 40 233 02 50 233 02 60 233 02 70 233 02 80 233 02 90 233 03 00 233 03 20 233 03 30 233 03 40 233 03 50 233 03 60 233 03 80 233 03 90 233 04 00 233 04 20 233 04 50 233 04 80 233 05 00 233 05 20

L 03

HSS hand taps metric fine DIN 2181 2 pcs sets Thread-Ø

P/N

Hand taps HSS DIN 351 American coarse thread – sets 3 pcs. Thread-Ø threads per inch

P/N

M 18 x 2

233 11 80

NC 1/4

234 30 10

M 20 x 2

233 12 00

NC 5/16

234 30 20

M 22 x 2

233 12 20

NC 3/8

234 30 30

M 24 x 2

233 12 40

NC 7/16

234 30 40

M 26 x 2

233 12 60

NC 1/2

234 30 50

M 27 x 2

233 12 70

NC 9/16

234 30 60

M 28 x 2

233 12 80

NC 5/8

234 30 70

M 30 x 2

233 13 00

NC 3/4

234 30 80

M 33 x 2

233 13 30

NC 7/8

234 30 90

M 36 x 2

233 13 60

NC 1

234 31 00

M 39 x 2

233 13 90

NC 1 1/8

234 31 10

M 40 x 2

233 14 00

NC1 1/4

234 31 20

M 42 x 2

233 14 20

NC 1 3/8

234 31 30

M 45 x 2

233 14 50

NC1 1/2

234 31 40

M 48 x 2

233 14 80

M 50 x 2

233 15 00

M 52 x 2

233 15 20

M 30 x 3

233 23 00

M 36 x 3

233 23 60

HSS hand taps DIN 351 American fine pitch thread NF – sets 3 pcs. Thread-Ø threads per inch

M 39 x 3

233 23 90

NF 1/4

235 30 10

M 40 x 3

233 24 00

NF 5/16

235 30 20

M 42 x 3

233 24 20

NF 3/8

235 30 30

M 45 x 3

233 24 50

NF 7/16

235 30 40

M 48 x 3

233 24 80

NF 1/2

235 30 50

M 50 x 3

233 25 00

NF 9/16

235 30 60

M 52 x 3

233 25 20

NF 5/8

235 30 70

NF 3/4

235 30 80

NF 7/8

235 30 90

NF 1

235 31 00

NF 1

235 31 10

NF 1 1/8

235 31 20

NF 1 1/4

235 31 30

NF 1 3/8

235 31 40

NF 1 1/2

235 31 50

Thread-Ø M3 M4 M5 M6 M7 M8 M 10

L 04

Standard version P/N 242 30 30 242 30 40 242 30 50 242 30 60 242 30 70 242 30 80 242 31 00

Machine tap DIN 352 HSS short machine taps for metric thread or metric ISO thread DIN 13 AZ version with Standard interrupted thread version P/N Thread-Ø P/N 242 00 30 M 12 242 31 20 242 00 40 M 14 242 31 40 242 00 50 M 16 242 31 60 242 00 60 M 18 242 31 80 242 00 70 M 20 242 32 00 242 00 80 M 22 242 32 20 242 01 00 M 24 242 32 40

P/N

AZ version with interrupted thread P/N 242 01 20 242 01 40 242 01 60 242 01 80 242 02 00 242 02 20 242 02 40

Tap wrench Adjustable tap wrench with hardened steel jaws as per DIN 1814 with unscrewable arms. � size 0 1 1½ 2 3

Metric M1-8 M 1- 10 M 3 – 12 M 4 – 22 M 5 -20

P/N 267 50 00 267 51 00 267 51 50 267 52 00 267 53 00

� size 4 5 6 7

Metric M 10 – 27 M 14 – 33 M 18 – 42 M 27 – 52

P/N 267 54 00 267 55 00 267 56 00 267 57 00

Tap ball wrench With unscrewable arms and fixed square holes. Size 0 1 2 3 4 5 6

Square 2,1 - 2,7- 3.0 - 3,4 3.0 - 3,4 - 4,3 - 4,9 3,4 - 4,3 - 4,9 - 5,5 4,9 - 5,5 - 6,2 - 7.0 5,5 - 6,2 - 7.0 - 9.0 7.0 – 9.0 - 11 - 12 11 - 12 -14,5 – 6.0

Metric /fine M 1 - 4,5 M 3,5 - 8 M 4 - 10 M 5 - 12 M 9 - 16 M 12 - 20 M 18 - 27

P/N 266 00 00 266 00 10 266 00 20 266 00 30 266 00 40 266 00 50 266 00 60

Tap tool holder. For the admission of thread taps with ratchet and hardened steel chuck. Size 1 2 3 4

Metric M 3 - M 10 M 5 - M 12 M 3 - M 10 M 5 - M 12

Length 80 mm 97 mm 250 mm 300 mm

P/N 268 00 10 268 00 20 268 10 10 268 10 20

Die stock Die stock as per DIN 225 for the direct admission of round dies, DIN 223 Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Inside-Ø x height mm 16 x 5 20 x 5 20 x 7 25 x 9 30 x 11 38 x 10 38 x 14 45 x 14 45 x 18 55 x 16 55 x 22 65 x 18 65 x 25 75 x 20 75 x 30 90 x 22

Metric

P/N

M 1 - 2,6 M3–4 M 4,5 - 6 M7-9 M 10 - 11 M 12 - 14 M 12 - 14 M 15 - 20 M 16 - 20 M 22 - 24 M 22 - 24 M 25 - 36 M 27 - 36 M 38 - 42 M 39 - 42 M 45 - 52

265 00 10 265 00 20 265 00 30 265 00 40 265 00 50 265 00 60 265 00 70 265 00 80 265 00 90 265 01 00 265 01 10 265 01 20 265 01 30 265 01 40 265 01 50 265 01 60

L 05

Die stock. For round dies, DIN 223. To be used in the tightest areas. Manipulation by ratchet and socket or by the enclosed box spanner (female hexagon 24mm and external hexagon 30mm)

admission

3 - 6* 7 - 8* 9 - 10* 11 - 14* 18 - 20 22 - 24

Ø 20 Ø 25 Ø 30 Ø 38 Ø 45 Ø 55

external hexagon 24 24 24 41 41 41

female hexagon

30 30 30

P/N 265 50 10 265 50 20 265 50 30 265 50 40 265 50 50 265 50 60

Grip for die stock

p/n 265 55 00

Die stock set 7 pcs. Die stock set 5 pcs. *

p/n 265 60 00 p/n 265 65 00

Thread restorer file Universal thread restorer file for interior and external threads Thread restorer file Durospan GF (metric-ISO) p/n 306 00 10

Thread repair and cleaning set M12x1,25 / M12x1,50 / M 14x1,50 An ideal set arrangement for cleaning and re-cutting the threads of wheel hubs, wheel bolts, stay bolts and wheel nuts. Salt, corrosion, rust, contamination or diagonal setting risks the danger of damage to the threads and can produce the wrong torques when tightening. With this universal cleaning and repair set these problems can be repaired and/or avoided. Thread repair and cleaning set

L 06

p/n 232 20 10

HSS dies round DIN 223 for metric thread or metric ISO Fine thread DIN 13 Thread

Outside Ø 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 25 25 25 30 30 38 38 45 45 45 55 55 65 65 65 65 75 75 90 90 90

Pitch mm

M1 M 1,1 M 1,2 M1,4 M1.6 M1.7 M1,8 M2 M2,2 M2.3 M2,5 M2,6 M3 M3,5 M4 M4,5 M5 M5,5 M6 M7 M8 M9 M10 M11 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M 36 M 39 M 42 M 45 M 48 M 52

0.25 025 0.25 0,3 0.35 035 0.35 0,4 0,45 0.4 0.45 0.45 0,5 0.6 0,7 0.75 0,8 0,9 1 1 1.25 1.25 1,5 1,5 1,75 2 2 2,5 2,5 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5

HSS-Dies Hexagon DIN 382

P/N 2500100 2500110 2500120 2500140 2500160 2500170 2500180 2500200 2500220 2500230 2500250 2500260 2500300 2500350 2500400 2500450 2500500 2500550 2500600 2500700 2500800 2500900 2501000 2501100 2501200 2501400 2501600 2501800 2502000 2502200 2502400 2502700 2503000 2503300 2503600 2503900 2504200 2504500 2504800 2505200

P/N

19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 19 mm 22 mm 22 mm 22 mm 27 mm 27 mm 36 mm 36 mm 41 mm 41 mm 41 mm 50 mm 50 mm 60 mm 60 mm 60 mm 60 mm 70 mm 70 mm 85 mm 85 mm 85 mm

2600300 2600350 2600400 2600450 2600500 2600550 2600600 2600700 2600800 2600900 2601000 2601100 2601200 2601400 2601600 2601800 2602000 2602200 2602400 2602700 2603000 2603300 2603600 2603900 2604200 2604500 2604800 2605200

HSS dies round for American coarse thread NC Thread inch-Ø NC 1/4 NC 5/16 NC 3/8 NC 7/16 NC 1/2 NC 9/16 NC 5/8 NC 3/4 NC 7/8 NC 1 NC 1 1/8 NC 1 1/4 NC 1 3/8 NC 1 1/2

threads per inch 20 18 16 14 13 12 11 10 9 8 7 7 6 6

Outside Ø mm 20 25 30 30 38 38 45 45 55 55 65 65 65 75

Height mm 7 9 11 11 14 14 18 18 22 22 25 25 25 30

P/N 2520010 2520020 2520030 2520040 2520050 2520060 2520070 2520080 2520090 2520100 2520110 2520120 2520130 2520140

HSS dies round for American fine pitch thread NF Thread inch-Ø NF 1/4 NF 5/16 NF 3/8 NF 7/16 NF 1/2 NF 9/16

28 24 24 20 20 18

Outside Ø mm 20 25 30 30 38 38

NF 5/8 NF 3/4 NF 7/8

18 16 14

45 45 55

Height mm 7 9 11 11 10 10

P/N 2530010 2530020 2530030 2530040 2530050 2530060

14 14 16

2530070 2530080 2530090

HSS dies round DIN 223 for metric thread or metric ISO fine thread DIN 13 Thread M 3 x 0,5 M 4 x 0,35 M 4 x 0,5 M 5 x 0,5 M 6 x 0,5 M 8 x 0,5 M 10 x 0,5 M 6 x 0,75 M 7 x 0,75 M 8 x 0,75 M 9 x 0,75 M 10 x 0,75 M 12 x 0,75 M 14 x 0,75 M8xl M9x1 M 10 x 1 M 11 x l M 12 x 1 M 13 x 1 M 14 x 1 M 15x 1 M 16 x 1 M 18 x 1 M 20 x 1 M 22 x 1 M 24x1 M 25x 1 M 26x 1 M 27 x 1 M 28 x 1 M 30 x 1 M 10 x 1,25 M 11 x 1,25 M 12 x 1,25 M 14 x 1,25 M 16 x 1,25 M 18 x 1,25 M 20 x 1,25 M 8 x 1,5 M 12 x 1,5 M 13 x 1,5 M 14 x 1,5 M 1 5 x 1,5 M 16 x 1,5 M 18x 1,5 M 20x 1,5 M 21 x 1,5 M 22 x 1,5 M 23 x 1,5 M 24 x 1,5 M 25 x 1,5 M 26 x 1,5 M 27 x 1,5 M 28 x 1,5 M 29 x 1,5 M 30 x 1,5 M 32 x 1,5 M 33 x 1,5 M 34 x 1,5 M 35 x 1,5 M 36 x 1,5 M 38 x 1,5 M 39 x 1,5 M 40 x 1,5 M 42 x 1,5 M 45 x 1,5 M 48 x 1,5 M 50 x 1,5 M 52 x 1,5 M 18 x 2 M 20 x 2 M 22 x 2 M 24 x 2 M 26 x 2 M 27 x 2 M 28 x 2 M 30 x 2 M 33 x 2 M 36 x 2 M 39 x 2 M 40 x 2 M 42 x 2 M 45 x 2 M 48 x 2 M 50 x 2

HSS-Dies Hexagon DIN 382

Outside Ø

Height mm

P/N

20 20 20 20 20 25 30 20 25 25 25 30 38 38 25 25 30 30 38 38 38 45 45 45 45 55 55 65 65 65 65 65 30 30 38 38 45 45 45 38 38 38 38 45 45 45 45 55 55 55 55 65 65 65 65 65 65 65 65 65 65 65 75 75 75 75 90 90 90 90 45 45 55 55 65 65 65 65 65 65 75 75 75 90 90 90

5 5 5 7 7 9 11 7 9 9 9 11 10 10 9 9 11 11 10 10 10 14 14 14 14 16 16 18 18 18 18 18 11 11 10 10 14 14 14 10 10 10 10 14 14 14 14 16 16 16 16 18 18 18 18 18 15 18 18 18 18 18 20 20 20 20 22 22 22 22 14 14 16 16 18 18 18 18 18 18 20 20 20 22 22 22

2510030 2510040 2511040 2511050 2511060 2511080 2511100 2512060 2512070 2512080 2512090 2512100 2512120 2512140 2513080 2513090 2513100 2513110 2513120 2513130 2513140 2513150 2513160 2513180 2513200 2513220 2513240 2513250 2513260 2513270 2513280 2513300 2514100 2514110 2514120 2514140 2514160 2514180 2514200 2515080 2515120 2515130 2515140 2515150 2515160 2515180 2515200 2515210 2515220 2515230 2515240 2515250 2515260 2515270 2515280 2515290 2515300 2515320 2515330 2515340 2515350 2515360 2515380 2515390 2515400 2515420 2515450 2515480 2515500 2515520 2516180 2516200 2516220 2516240 2516260 2516270 2516280 2516300 2516330 2516360 2516390 2516400 2516420 2516450 2516480 2516500

19 mm 19 mm 19 mm 19mm

2610030 2610040 2611040 2611050 -

19 mm 22 mm 22 mm 22 mm 27 mm 27 mm 36 mm 36 mm 36 mm 41 mm 41 mm 41 mm 50 mm

2611060 2611080 2612080 2612090 2612100 2612110 2612120 2613120 2613140 2613160 2613180 2613200 2613220

50 mm

2613240

60 mm 60 mm 60 mm

60 mm 60 mm 70 mm

2613260 2613270 2613280 2613300 2613320 2613330 2613350 2613360 2613380

70 mm 70 mm 85 mm 85 mm 85 mm 85 mm 41 mm 41 mm 50 mm 50 mm

2613400 2613420 2613450 2613480 2613500 2613520 2614180 2614200 2614220 2614240

60 mm 60 mm 60 mm 60 mm 70 mm 70 mm 70 mm 85 mm 85 mm 85 mm

2614270

60 mm 60 mm 60 mm

2614300 2614330 2614360 2614390 2614400 2614420 2614450 2614480 2614500

L 07

Glow plug thread repair kits For repairing damaged or for renewing destroyed glow plug threads. When the thread is only slightly damaged the thread is re cut with the finishing tap. Using the reamer the destroyed thread is removed and the drilling for cutting the thread is prepared. The threaded bush is placed last using the turner. Repair kits

6042100 M 8 x 1,0

6041700 M10x1x10

6041710 M10x1x19

6041500 M10x1,25

6041900 M12 x 1,25

Reamer

6042101

6041701

6041501

6041960

Tap

6042102

6041702

6041502

6041950

Finishing tap

6042103

6041703

6041503

Threaded bush setting tool

6042104

6041704

6041504

M 8 x 1,0 x 11 mm 6 pcs.

6044085

M10 x 1,0 x 10 mm 6 pcs.

6044090

M10 x 1,0 x 19 mm 6 pcs.

6044095

M10 x 1,25 x 17 mm 6 pcs. M12 x 1,25 x 12,7 mm 8 pcs.

6044125 6041980

Thread repair kits For repairing or renewing destroyed threads. Using the special drill (3 fluted, titanium-nitrated) the destroyed thread is removed and the drilling for using the threaded bush is introduced. Using the bush setter the cutting threaded bush is then placed. Contents Special drill (3 fluted, titanium-nitrated) 10 cutting threaded bushes Bush setter

L 08

Special drill 6mm for M4 10 cutting threaded bushes M4 Bush setter for M4 Thread repair kit M4

p/n 930 09 00 p/n 930 03 40 p/n 930 05 40 p/n 930 00 40

Special drill for M 5 10 cutting threaded bushes M5 Bush setter for M5 Thread repair kit M5

p/n 930 09 10 p/n 930 03 50 p/n 930 05 50 p/n 930 00 50

Special drill 9mm for M6 10 cutting threaded bushes M6 Bush setter for M6 Thread repair kit M6

p/n 930 09 20 p/n 930 03 60 p/n 930 05 60 p/n 930 00 60

Special drill 11mm for M8 10 cutting threaded bushes M8 Bush setter for M8 Thread repair kit M8

p/n 930 09 30 p/n 930 03 80 p/n 930 05 80 p/n 930 00 80

Special drill 13mm for M10 10 cutting threaded bushes M10 Bush setter for M10 Thread repair kit M10

p/n 930 09 40 p/n 930 04 00 p/n 930 06 00 p/n 930 01 00

10 cutting threaded bushes M M10x1,25 Bush setter for M M10x1,25 Thread repair kit M M10x1,25

p/n 930 04 70 p/n 930 06 70 p/n 930 02 00

Special drill 15mm for M12 10 cutting threaded bushes M12 Bush setter for M12 Thread repair kit M12

p/n 930 09 50 p/n 930 04 20 p/n 930 06 20 p/n 930 01 20

10 cutting threaded bushes M12x1,5 Bush setter for M12x1,5 Thread repair kit M12x1,5

p/n 930 04 80 p/n 930 06 80 p/n 930 02 20

Special drill 17mm for M14 10 cutting threaded bushes M14 Bush setter for M14 Thread repair kit M14

p/n 930 09 60 p/n 930 04 40 p/n 930 06 40 p/n 930 01 40

10 cutting threaded bushes M14x1,25 Bush setter for M14x1,25 Thread repair kit M14x1,25

p/n 930 04 90 p/n 930 06 90 p/n 930 02 40

10 cutting threaded bushes M14x1,5 Bush setter for M14x1,5 Thread repair kit M14x1,5

p/n 930 05 00 p/n 930 07 00 p/n 930 02 50

Special drill 19 mm for M16 10 cutting threaded bushes M16 Bush setter for M16 Thread repair kit M16

p/n 930 09 70 p/n 930 04 60 p/n 930 06 60 p/n 930 01 60

10 cutting threaded bushes M16x1,5 Bush setter for M16x1,5 Thread repair kit M16x1,5

p/n 930 05 10 p/n 930 07 10 p/n 930 01 70

Hard metal milling cutters One piece polished, for the machining of welding seams, spot and MIG welds, hardened steel, castings etc. (for use in the pneumatic axial grinder) shank diameter 6 mm. Spherical shape 10 mm Ă&#x2DC; Spherical shape 12 mm Ă&#x2DC; Drip shape 10 x 16 mm Flame shape 8 x 20 mm Cylindrical shape 10 mm Hard metal milling cutters set 5 pcs

p/n 670 01 00 p/n 670 01 20 p/n 670 21 00 p/n 670 10 80 p/n 670 31 00 p/n 670 50 00

L 09

Hacksaw and saw blades Hacksaw for all commercially available saw blades In fully flexible HSS and HSSE quality for the rational sawing of hard, high alloy and stainless steel.

Hacksaw S without blades p/n 307 17 00 Blueflex HSS hand saw blade teeth 18 p/n 307 01 80 Blueflex HSS hand saw blade teeth18 double sided p/n 307 05 00 Blueflex HSS hand saw blade teeth 24 p/n 307 02 40 Blueflex HSS hand saw blade teeth 24 double sided p/n 307 05 10 Blueflex HSS hand saw blade teeth 32 p/n 307 03 20 Redflex HSSE hand saw blade teeth 18 p/n 307 11 80 Redflex HSSE hand saw blade teeth 24 p/n 307 12 40 Redflex HSSE hand saw blade teeth 32 p/n 307 13 20

Plaque scraper For removing plaque. Plaque scraper

p/n 311 20 00

p/n 311 10 05

Pipe cutter Pipe cutter for copper, brass, aluminium and thin-walled steel tubes Pipe cutter T 03 Cutting range 3-16 mm = 1/8"- 5/8" Length: 50 mm. for close radii Pipe cutter T 03

L 10

p/n 312 10 400

Austria

Switzerland

France

Belgium

Pichler Werkzeug GmbH & Co KG Pacherstrasse 20 A - 6023 Innsbruck

Pichler Werkzeug AG RĂźnenbergerstraĂ&#x;e 31 CH - 4460 Gelterkinden

Pichler Outillage Sarl 19, rue de Reiningue F - 68310 Wittelsheim

Pichler Outillage BVBA Industrieweg 45 B - 8800 Roeselare

Tel.: +43 512 344 552 Fax.: +43 512 393 762 info@pichler-werkzeug.com

Tel.: +41 61 981 33 55 Fax.: +41 61 981 12 86 pichler@werkzeugag.ch

Tel.: +33 3 89 551 596 Fax.: +33 3 89 552 438 pichler@pichler.fr

Tel.: +32 51 250 828 Fax.: +32 51 250 829 pichler.belgique@pichler.fr