BRACON Dental Laboratory Products
Carbon-free phosphate-bonded investment
A proven dimension in high precision castings
F I R S T
I S
Q U A L I T Y
Product characteristics for high precision castings
at the final just 20 r mixing.
High precision investments
Ease of use
● Extremely smooth cast surfaces and reproduction of the minutest detail even with finely feathered edges.
● Fluid consistency and adequate setting time Time saving facilitate investing.
Features and ed for quickstments Benefits
Consistent quality
● Can be fired at the final 20 minutes after mixing.
Controlable expansionjust temperature
● Perfectly suited for quickheating investments
Ease of use An extremely fluid consistency allows even the finest modelling edges to High precision investments be reproduced, down to the smallest detail. The working time of up to 4 minutes ● Extremely smooth cast is conducive careful, consurfaces and to reproductrolled investment. The crititioncal ofaspect the minutest detailis of edge stability even with finely feathered guaranteed by good comedges. pressive strength (5 MPa). The final cast - a very smooth surface structure down to the finest detail.
Time saving Of particular importance GC Fujivest Super to the dental technician is Stepped heating progression the suitability of GC Fujivest Super® for laboratory appliMin. cation - a suitability amply demonstrated by its physical properties. The amount of time saved speaks for itself. After a mere 20 minutes, the product is set and can be placed in the pre-heated furnace at the final temperature.
st Super ®
Final temperature 700° - 900°C
250°C 23° Room temperature
Product characteristics fo Ease of use ● Fluid consistency and adequate setting time facilitate investing. Consistent quality Extremely fluid consistency Controlable expansion
Compressive strength
Smooth cast without sprues
Expansion test
GC Fujivest Super® is a widely applicable, high quality investment material, which fully satisfies the requirements of the modern dental laboratory. It combines ideally the benefits of traditional materials with the time-saving advantage of quick-heating. GC Fujivest Super Stepped heating progression
Controlable expansion Exact control of the total Min. expansion is crucial for the accuracy of the fit of the castings. Here again, the procedure is straight-forward and geared to routine, practical use.
Product B
Expansion
100% Liquid
Setting expansion
1,18
Thermal expansion
1,01
Total expansion
2,19
100
125x magnification of the investment surface
st Super
®
High Precision Investments The use of carefully balanced, fineparticle filler in the powder mix significantly reduces surface roughness, and improves the surface quality of the final cast.
Indications
Further
● For quick and step heating
● Ask for the sp for Implanto
● With special attention B and semiforProduct precious precious alloys SEM photograph with 125x magnification of the investment surface
GC Fujivest Super ®
● Perfect fit even for long span resolutions
uct B
GC Fujivest Super®
magn. 25x) with sur-
Product B
Finished gold casting (magn. 25x) with surface structure
Product characteristics for high precision castings
r high precision castings
at the final just 20 r mixing.
High precision investments
Ease of use
● Extremely smooth cast surfaces and reproduc-
● Fluid consistency and adequate setting time
Ease of use tion of the minutest detail facilitate investing. An extremely even with fluid finely consisfeathered ed for quickConsistent quality tency edges. allows even the finest stments Controlable expansion modelling edges to be reproduced, down to the smallest detail. The working time of up to 4 minutes is conducive to careful, controlled investment. The critical aspect of edge stability is guaranteed by good compressive strength (5 MPa).
Extremely fluid consistency
Ease of use An extremely fluid consistency allows even the finest modelling edges to be reproduced, down to the smallest detail. The working time of up to 4 minutes is conducive to careful, controlled investment. The critical aspect of edge stability is guaranteed by good compressive strength (5 MPa).
Extremely fluid consistency
The final cast - a very smooth surface structure down to the finest detail. GC Fujivest Super® is a wide-
ly applicable, high quality Compressive strength test
investment material, which fully satisfies the requirements of the modern dental laboratory.
The final cast - a very GC Fujivest Super Stepped heating smooth surface structure progression down to the finest detail. Min.
It combines ideally the benefits of traditional materials with the time-saving advantage of quick-heating.
GC Fujivest Super® is a widely applicable, high quality investment material, which fully satisfies the requirements of the modern dental laboratory. It combines ideally the benefits of traditional materials with the time-saving advantage of quick-heating.
st Super ®
Smooth cast without sprues
Product B
Consistent quality Uniform results when processing dental materials can not be achieved economically unless their quality is maintained from one batch to the next.
Controlable expansion Exact control of the total expansion is crucial for the accuracy of the fit of the castings. Here again, the procedure is straight-forward Expansion testgeared to routine, pracand tical use.
Compressive strength
Each batch is checked several times during manufacture by means of in-process controls to ensure compliance with product-specific characteristics. The final result of the invested material is also subject to optical and photometric test criteria using a series of Smooth cast without sprues before Expansion test reference models a batch is finally released. Expansion
100% Liquid
Setting expansion
1,18
Thermal expansion
1,01
Total expansion
2,19
100
125x magnification of the investment surface
st Super
®
Controlable expansion Exact control of the total expansion is crucial for the accuracy of the fit of the castings. Here again, the procedure is straight-forward and geared to routine, practical use.
100% Liquid
Setting expansion
1,18
Thermal expansion
1,01
Total expansion
2,19
100% Water 0,32 Indications 0,58 ● For quick and step heating 0,90 ● With special attention for precious and semiprecious alloys ● Perfect fit even for long span resolutions
uct B
magn. 25x) with sur-
Expansion
Indications
Further Infomation
● For quick and step heating
● Ask for the special brochure: “GC Fujivest Super” for Implantology
● With special attention for precious and semiprecious alloys ● Perfect fit even for long span resolutions
Further
● Ask for the sp for Implanto
Physical properties*
Guidelines for perfect casts
Powder/liquid ratio
100 g / 22 ml
Mixing time
1 minute
Working time
up to 4 minutes
Setting time
8 minutes
Setting expansion
1.18%
Thermal expansion
1.01%
Total expansion
2.19%
Compressive strength
5 MPa
Optimal storage and working conditions are at a temperature of 23°C.
Do not use old mixing bowls or those containing residual investment.
* at a room temperature of 23°C and 100% liquid concentration
Carefully pre-mix by hand until the powder is evenly wetted with the liquid - a precondition for accurate casting.
Packaging
Only a small amount of vibration is required for investing the material due to its extreme fluidity. Fierce vibration should be avoided.
Stop vibrating as soon as the ring is filled. Do not touch the material until it has set.
After pouring, leave the investment to set for 20 minutes before placing it directly into a pre-heated furnace.
Casting and devesting.
Pack.: 6 kg powder (100 x 60 g bags) 6 kg powder (67 x 90 g bags) 6 kg powder (40 x 150 g bags) 900 ml liquid 900 ml liquid H.E. (High Expansion Liquid)
GC UNITED KINGDOM Ltd. GC EUROPE N.V. 22-23, Coopers Court Head Office Newport Pagnell Interleuvenlaan 13 UK - Bucks. MK16 8JS B-3001 Leuven Tel. +44.1908.218.999 Tel. +32.16.39.80.50 Fax. +44.1908.218.900 Fax. +32.16.40.02.14 E-mail: info@uk.gceurope.com E-mail: info@gceurope.com www.uk.gceurope.com www.gceurope.com Dental Laboratory Products
Bracon Limited • Unit C • Swife Business Park • Burwash Road • Broad Oak • Heathfield • East Sussex TN21 8UP t: +44 (0)1580 817000 e: sales@bracon.co.uk w: bracon.co.uk F I R S T
I S
Q U A L I T Y
z O LF GB 47 0 - 12/02
BRACON