FIGURE 5.11 You can also view the electronic level through the viewfinder. In this example, the hash marks that you see indicate that the camera is not level on the horizon. The indicator on the top LCD Panel shows these same hash marks on the bottom of the panel.
SETTING THE ELECTRONIC LEVEL IN THE LCD MONITOR
A
1. First, be sure that you have the electronic level set up to display properly. To do so, press the Menu button and use the Main dial to select the third setup tab, and then scroll down to Info Button Display Options using the Quick Control dial (A). Press the Set button. 2. Make sure that there is a check mark next to the Electronic Level setting (B). If there isn’t, use the Quick Control dial to scroll to it, and then press the Set button (a check mark should appear). Use the Quick Control dial again to scroll down to OK, and then press Set. 3. Next, press the Info button until the electronic level appears in the LCD Monitor. (To view the electronic level when using Live View, press the Info button until it appears in the LCD Monitor.) You’ll know the horizontal tilt is leveled when the red lines turn green (C). ■
B
C
CHAPTER 5: LANDSCAPE PHOTOGRAPHY
137