Version Version1.09 connector as it might short against components on the RockMite circuit board.
RockMite Assembly Instructions
Carefully route the wires so that they travel along the side and bottom of the box.
Figure 54 Wiring routed along the side
Solder the ring connector for the BNC connector to the grey lead.
Figure 53 Diode tucked away
Mount the power connector in the larger of the two holes in the rear of the radio. Orient the lugs so that the 12 O’Clock lug (with the two brown ground wires) is up. Secure the connector with a flat washer and hex nut on the outside of the box.
Mount the key jack in the other small hole in the rear of the radio. Orient the ground lug (with the black and brown wires) towards the center. Secure with the ring nut.
Figure 55 Ring connector
37