Misc.
WINDSCREEN WIPER CONTROL PANELS W PANEL
If multiple windscreen wipers are installed this VETUS control panel allows up to 5 wiper motors to run synchronously, at either high or low speed. Each wiper motor is individually switched, so it is possible to select which wipers are operational. The wiper motors to be connected must have 2 speeds and an automatic parking position. The device also features a combination switch for the functions: • Screen wash/wipe activation • Speed selection and interval wipe delay. Pressing the switch one way will start the wash/wipe function for all operational wipers. Pressing the switch the other way will select the wiper speed or one of five interval delays for all operational wipers. A LED on the panel indicates which interval position has been selected. Option
Up to 3 VETUS rain sensors, type MARBO, can be connected to the control unit. The rain sensor function is activated using the supplied switch panel. With one single rain sensor fitted, it is possible to activate all five wipers simultaneously. Alternatively, sensor 1 activates one wiper motor, sensor 2 activates three wiper motors and sensor 3 activates one wiper motor. The rain sensor kit consists of a rain sensor and switch panel.
The control panel is supplied complete with the following components: 1 control unit, 5 wiper motor switches, 1 combined switch for wash/ wipe and speed selection, 1 mounting plate with locations for 6 switches and 2 blind plates. The panel is completely pre-wired. The control unit has electronic overload protection and can be DIN rail mounted.
Technical data: Voltage: 12 and 24 Volt D.C. Power consumption, stand-by: approx. 10 mA Maximum power per wiper motor: 120 W Internal fuses: 10A each wiper motor, 5 A for screen wash pump or solenoid valve. Dimensions: 160 x 90 x 60 mm Control panel: 19 x 10 x 15 mm
MARB02 MARB0
For smaller craft, this panel type RWPANEL 2 will control up to three switched windscreen wipers synchronously. The wipers can be set to run at high or low speed or at one of five interval wipe speeds. If required, the wipers can also be operated automatically by connecting an optional rain sensor. • • • • • • • •
Suitable for controlling 1, 2 or 3 individually switched windscreen wipers The wipers can be set at two different speeds There are 5 interval wipe settings A screen wash system can also be activated All connected wipers will work synchronously All wipers will self-park when switched off RW PANEL2 The panel is suitable for both 12 Volt and 24 Volt D.C. supply Up to three rain sensors (type MARBO2) may be connected, for automatic operation of the wiper(s) • Dimensions of the control panel: 85 x 85 mm • Built-in depth: 40 mm • Control unit: 160 x 90 x 60 mm 216 www.vetus.com
216217_11_ROW.indd 2
12/16/2010 11:52:41 AM