Catalogo general de RAASM by Alex mtisl

Catalogue No. 217 1st September 2006

Made in Italy

FLUIDS AND LUBRICATION EQUIPMENT

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

8:58

Pagina 5

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

8:55

Pagina 1

founded in 1975

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

8:55

Pagina 2

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

8:56

Pagina 3

General view of RAASM Area in San Zeno di Cassola - Vicenza

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

8:58

Pagina 6

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:07

Pagina 7

RAASM premises in San Zeno di Cassola - Vicenza

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 8

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 9

RAASM branch in Romano d’Ezzelino - Vicenza

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 10

specialists in the production of EQUIPMENT FOR FLUIDS AND LUBRICANTS USE air • water • oil • greases • antifreeze • diesel oil • detergents and allied products • industrial and chemical fluids, paints, etc.

OPERATIONS transfer and siphoning of fluids (for a wide range of deliveries and pressures) lubrication • greasing bleeding of brakes and clutches spraying • tyre inflating graphiting • washing • fixed systems mobile systems • etc.

SECTORS: repair garages • service stations • mechanical industry automobile industry • chemical industry tanning industry • wood industry marble industry • manufacturing industry in general agriculture • building • road works boating • aircraft • civil and military airports railway sector • mining sector armed forces • mobile workshops and other

RAASM products (made in Italy)

are highly versatile and easy to use.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 11

working for TOMORROW, TODAY

EXPERTISE

RESEARCH AND DESIGN

PROFESSIONALISM

PRODUCTION TECHNOLOGIES

COMMUNICATION

SUPPLIES SELECTION

INTERPERSONAL RELATIONS

CONTINUITY AND CONSTANCY

ENTHUSIASM

SERVICE

FLEXIBILITY

QUALITY IS A COMBINATION OF AND CARE TO MANY SMALL BUT IMPORTANT DETAILS

GUARANTEE AND LASTING RELIABILITY

MADE IN ITALY

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 12

The starting point for the entire production cycle is the research and design of new solutions that will become cutting-edge products.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 13

Mechanical and electronic testing of projects that become a concrete reality.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 14

High precision dies developed in partnership with specialist companies, using cutting edge technology.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 15

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:14

Pagina 16

Highly automated robotised welding islands, with different positions for covering all the types of our products, to guarantee high precision results.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

Welding quality is guaranteed by: - the material used - precise torch positioning - control of temperature The control of welding quality is guaranteed by: - a high-tech robot - an appropriate welding programme - an absolute control of position and...

9:16

Pagina 17

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:16

Pagina 18

... testing and a complete visual check of all welds of each product.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

The painting is guaranteed by innovative systems with lead and heavy metal-free non-toxic polyester resin for exteriors, with average thickness of 80 µ. The painting is highly resistant to atmospheric agents and impacts. The painted products undergo “saline mist resistance” corrosion testing according to UNI 9227 standards.

9:16

Pagina 19

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:16

Pagina 20

Computerised laser cutting enables the execution of complex work requiring extreme precision. Bending press with electronic programmer, for working sheet with an absolute control of bending to ensure a high quality standard.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:16

Pagina 21

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 22

Turning, with state of the art machinery, as a result of continuing investment. Allowing the manufacture of complex components.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 23

Numerical control work centres. Machines that guarantee top quality for the production of high-precision pieces. Control room for better quality.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 24

The excellence of the die-castings is ensured by the consistent quality of the castings obtained by means of computerised control of the presses and castings during the course of production.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 25

Robotised injection moulding of components in thermoplastic material with subsequent structural inspection of the moulded pieces.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 26

Automated vertical store complete with travelling lift for storage and handling of material...

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

... a static structure for a dynamic system. Control is carried out by means of company management software, offering efficiency and maximum flexibility.

Pagina 27

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 28

Industrial pump assembly department organised to make a product ready for the final testing phase where all the pumps are completely and individually checked according to internal procedures with calibrated measuring instruments.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:17

Pagina 29

Assembly departments for products ready for end-use.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:18

Pagina 30

The packaging department prepares the products with packaging suitable for specific protection requirements. This phase includes a further visual check of each article.

The carefully packaged products are sent to the warehouse which provides for shipments in Italy and to other countries where the RAASM brand is present.

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:18

Pagina 31

Customer service: a dedicated team of qualified technicians are available, to support customers and solve any possible problems. A single aim: CUSTOMER SATISFACTION

CATALOGO LIST 217 pag 1-32 GB ok

23-06-2006

9:18

Pagina 32

For a more efficient customer service, RAASM periodically organises refresher courses for its partners, for better knowledge of the products.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:22

Pagina 33

RAASM... other moments, with museum areas open to schools and the organisation of particular events open to the public.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:22

Pagina 34

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:22

Pagina 35

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:24

Pagina 36

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:24

Pagina 37

Index

Index Families

BRAKE BLEEDING - WASHING - INFLATING

page to

WASTE OIL SUCTION/DRAINERS

page to

SPECIAL DRAINERS

page to

MANUAL OIL AND GREASE PUMPS

page to

INFORMATION ON AIR OPERATED PUMPS AND SYSTEMS

page to

AIR OPERATED PUMPS

page to

AIR OPERATED PUMPS

FOR DISTRIBUTION OF GREASE

page to

TROLLEYS - SERVICE COLUMNS

page to

INDUSTRIAL PUMPS - HOISTS

page to

HOSE REELS AND ACCESSORIES

page to

FOR DISTRIBUTION OF OIL AND SIMILAR

63 101

103

111

113 127

129 149

151 234

237 267

269 282

285 329

331 409

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 2

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

10/09 10/10 10/11 10/12 10/13 10/14 10/15 10/17 10/18 10/20 10/22 10/23 10/24 10/50 10/51 10/52 10/55 10/56 10/57 10/60 10/61 10/62 10/65 10/66 10/67 10/80 10/81 10/82 10/85 10105 10205 10207 10705 10801 10802 10805 10807 11000/A 11000/B 11000/C 11000/D 11000/E 11000/F 11000/G 11000/H 11000/I 11000/K 11000/L 11000/M 11000/P 11000/R 11000/T 11000/U 11000/W 11000/X 11000/Y 11000/Z 11001 11002 11003 11003/1 11003/2 11003/3 11003/4

323 225-322 225-322 225-322 225-322 323 224-323 323 225-323 234-325 234-325 234-325 234-325 260-324 260-324 260-324 324 324 324 258-325 258-325 258-325 325 325 325 327 327 261-328 329 48 48 48 49 51 51 49 49 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 51 51 51 51 51

11003/5 11003/6 11003/7 11003/8 11003/9 11004 11/60 115D/121 115D/181 115D/31 115D/91 115DV/31 115F/121 115F/181 115F/401 115F/751 115F/91 116F/121 116F/181 116F/401 116F/751 117F/401 117F/751 120D/91 150D/41 150D/61 150DV/61 151F/701 152F/701 180D/51 180D/81 180DV/81 22017 22024 23024 23025 24801 24805 24806 24891 26090 26091 26094 30050 30051 30200 31200 31201 32016 32024 32065 32067 32068 32712 33016 33024 33060 33061 33070 33071 33072 33073 33080 33081

51 51 51 51 51 51 329 307 308 315 306 315 307 308 312 311 306 307 308 312 311 312 311 321 316 317 317 313 313 318 319 319 54 54 55 55 54 54 55 55-116 160 160 160 115 118 115 114 114 116 116 116 118 118 114-120 120 120 163 163 163 163 163 163 162 162

33082 33083 33094 33096 33/101160 33/101260 33100 33110 33112 33113 33114 33115 33116 33117 33118 33119 33120 33121 33122 33123 33124 33125 33126 33127 33128 33129 33130 33135 33140 33150 33151 33152 33153 33160 33161 33170 33171 33172 33173 33194 33196 33200 33210 33250 33270 33271 33272 33273 33274 33275 33276 33300 33360 33396 33426 33427 33434 33440 33500 33501 33510 33520 33530 33550

162 162 163 163 157 156 184 188 226 226 403 224 226-403 226-403 226 226-403 210 212 223 223 187 186 186-226 186-226 403 403 403 187 216 218-222 218 218 218-326 165 165 164 164 164 164 165 165 184 188 179 403 403 403 403 403 226 226 159 158 158 228 227 224 159-223 156 201 184 179 188 186

33581 33582 33590 33591 33701 33703 33705 35060 35061 35094 35160 35161 35163 35173 35176 35194 35196 35200 35210 35220 35250 35265 35270 35275 35276 35280 35281 35285 35290 35293 35296 35310 35312 35320 35322 35330 36060 36061 36063 36073 36076 36094 36096 36310 36312 36320 36322 36330 36340 36350 36420 36430 36530 36601 36602 36610 36611 36620 36621 36630 36641 36650 36651 36660

227 227 225 225 205-326 205-326 205-326 161 161 161 166 166 167 167 167 167 167 172 173 174 175 176 177 180 181 182 183 185 178 178 178 194 194 195 195 190 168 168 169 169 169 169 169 194 194 195 195 190 191 191 189 189 189 197 194 196 197 196 197 196 193 192 193 192

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 3

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

36661 36670 36675 36910 36912 36920 36930 37100 37150 37200 37500 37650 37670 37675 37676 37679 37680 37681 37682 37683 37685 37686 37687 37688 37689 37690 37691 37692 37693 37694 37695 37697 37698 37699 37701 37703 37711 37712 37713 37714 37715 37717 37718 37720 37722 37725 37726 37727 37735 37736 37737 37740 37741 37742 37743 37744 37745 37746 37747 37748 37749 37750 37751 37752

193 192 192 203 203 203 203 172 173 174 175 176 177 180 181 183 182 202 202 200 185 198 198 198 198 198 198 202 202 202 201 200 200 200 204 206 204 211 211 213 213 213 211 206 204 211 211 211 213 213 213 214-220 214 214 214 215 215 215 215 215 215 216-221 216 216

37765 37766 37767 37771 37772 37773 37801 37810 37811 37812 37814 37815 37816 37817 38010 38011 38012 38013 38015 38016 38017 38018 38020 38021 38022 38023 38024 38025 38026 38027 38028 38029 38030 38031 38032 38034 38035 38037 38038 38039 38040 38042 38043 38046 38047 38051 38052 38055 38062 38063 38065 38070 38071 38072 38073 38075 38076 38077 38078 38084 38085 38086 38087 38088

217 217 217 217 217 217 264 264 264 229-264 264 264 264 229-264 220 220 220 220 220 220 220 220 212-220 212 212 210-220 210 210 228 227 228 221 221 221 221 221 221 222 222 222 222 224 224 224 224 224 224 227 220 221 222 226 226-403 226-403 226 226 226 226 226 232 232 232 232 232

38089 38090 38091 38092 38093 38095 38096 38097 38098 38099 38100 38102 38105 38120 38121 38210 38211 39100 39200 39202 39210 39220 39221 39230 39240 39260 39261 39264 39265 39266 39267 39268 39280 39281 39282 39284 39285 39286 39287 39289 39290 39304 39307 39314 39317 39320 39321 39322 39324 39328 39351 39352 39901 39902 42000 42050 42059 42060 42061 42062 42063 42064 42065 42066

233 234 226 234 233 229 229 229 229 229 229 202 202 403 403 228 228 146 147 147 147 146-147 146-147 146-147 147 149-231 149-231 149 149 149 149 149 230 230 231 231 231 231 231 231 231 277 277 273 273 99 279 279 275 275 281 281 282 282 66 66 64 64 64 64 70 70 68 72

42069 42070 42072 42073 42088 42089 42090 42091 42101 42102 42103 42113 42114 42115 42116 42160 42164 42170 42215 43016 43024 43060 43065 43090 43091 43114 43115 43116 43190 43724 43760 43765 43790 44060 44065 44066 44067 44090 44091 44092 44093 44115 44116 44117 44118 45100 45110 45111 45150 45180 45200 45250 45280 45290 45291 45292 45300 45310 45311 45498 45499 45500 45501 45502

65 65 65 65 70 70 68 72 74 74 74 70 70 68 72 110 110 110 110 79 79 80 82 80 82 80 82 106 106 108 108 108 108 84 86 88 88 84 86 88 88 84 86 88 88 97 97 97 96 96 104 104 104 104 104 104 98 99 99 100 100 100 100 100

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 4

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

45504 45505 45506 45515 45516 45517 45518 45526 45527 45528 45538 45539 45540 45550 45551 45552 45560 45570 46064 46065 46114 46115 46116 46215 52010 52013 52015 52020 52024 53016 53024 60280 60310 60311 60410 60411 60450 60451 61280 61310 61311 61410 61411 62041 62048 62074 62095 63041 63048 63074 63095 64000 64000/65 64000/75 64020 64021 64024 64025 64030 64031 64032 64033 64033/40 64034

100 100 100 100 100 100 100 100 100 100 100 100 100-106 101-109 101-109 106 100 101 90 90 91 91 92 94 60 58 59 58 59 59 59 124 124 124 126 126 126-262 126-262 125 125 125 127 127 238 238 238 238 239 239 239 239 242 242 242 251 251 250 250 251 251 249 249 249 248

64035 64036 64037 64038 64038/65 64039 64039/65 64040 64041 64041/65 64042 64042/65 64063 64064 64064/65 64070 64070/65 64070/75 64145 64146 64147 64150 64151 64155 64156 64195 64196 64197 64200 64201 64210 64211 64510 64512 64520 64522 65138 65142 65160 65280 65309 65310 65311 65350 65385 65420 65600 66265 66310 66340 66370 66400 66590 66599 66661 66663 66739 66740 66741 66742 66743 66855 66856 66857

248 248 246 246 246 247 247 244 244 244 245 245 244 244 244 243 243 243 256 256 256 252 252 253 253 257 257 257 254 254 255 255 265 265 265 265 229-324 229-324 229-324 260 260 260 260 260 260 260 260 258 258 258 258 258 258 263 262 262 263 263 263 263 263 266 267 267

66860 66880 66881 66882 66888 66889 66891 66892 66893 66895 66896 66897 66899 68012 68113 68213 70365 70809 80035 80040 80050 80200 80201 8380.100 8380.101 8380.102 8380.200 8380.201 8380.202 8380.300 8380.301 8380.302 8380.350 8380.351 8380.352 8380.400 8380.401 8380.402 8380.500 8380.501 8380.502 8381.201 8381.301 8381.351 8382.100 8382.101 8382.102 8382.200 8382.201 8382.202 8382.300 8382.301 8382.302 8382.350 8382.351 8382.352 8382.401 8382.402 8382.500 8382.501 8382.502 8383.201 8383.301 8383.351

266 267 267 267 266 266 262 262 262-403 262 262 262 266 122 122 123 56 56 270 270 270 271 271 342 342 342 350 350 350 356 356 356 360 360 360 372 372 372 380 380 380 350 356 360 343 343 343 351-373 351 351 357 357 357 361 361 361 373 373 381 381 381 351 357 361

8390.100 8390.101 8390.102 8390.200 8390.201 8390.202 8390.300 8390.301 8390.302 8390.350 8390.351 8390.352 8390.400 8390.401 8390.402 8390.500 8390.501 8390.502 8391.201 8391.301 8391.351 8392.100 8392.101 8392.102 8392.200 8392.201 8392.202 8392.300 8392.301 8392.302 8392.350 8392.351 8392.352 8392.401 8392.402 8392.500 8392.501 8392.502 8393.201 8393.301 8393.351 8420.100 8420.101 8420.102 8420.103 8420.104 8420.200 8420.201 8420.202 8420.300 8420.301 8420.302 8420.350 8420.351 8420.352 8420.400 8420.401 8420.402 8420.500 8420.501 8420.502 8420.505 8420.506 8420.700

340 340 340 348 348 348 354 354 354 358 358 358 370 370 370 378 378 378 348 354 358 341 341 341 349-371 349 349 355 355 355 359 359 359 371 371 379 379 379 349 355 359 342 342 342 342 342 350 350 350 356 356 356 360 360 360 372 372 372 380 380 380 380 380 391

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 5

Index Articles Code

Page

Code

Page

Code

Page

8420.701 8420.702 8420.800 8420.801 8420.802 8420.803 8420.804 8421.202 8421.302 8421.352 8422.100 8422.101 8422.102 8422.103 8422.104 8422.201 8422.202 8422.301 8422.302 8422.351 8422.352 8422.401 8422.402 8422.500 8422.501 8422.502 8422.505 8422.506 8423.202 8423.302 8423.352 8424.101 8424.102

391 391 393 393 393 393 393 350 356 360 343 343 343 343 343 351 351 357 357 361 361 373 373 381 381 381 381 381 351 357 361 363 363 351-363 365-373 365 365 357-367 367 367 361-369 369 369 394 394 395 395 340 340 340 340 340 348 348 348 354 354 354 358 358 358 370 370 370

8430.500 8430.501 8430.502 8430.505 8430.506 8430.700 8430.701 8430.702 8430.800 8430.801 8430.802 8430.803 8430.804 8431.202 8431.302 8431.352 8432.100 8432.101 8432.102 8432.103 8432.104 8432.201 8432.202 8432.301 8432.302 8432.351 8432.352 8432.401 8432.402 8432.500 8432.501 8432.502 8432.505 8432.506 8433.202 8433.302 8433.352 8434.101 8434.102

378 378 378 378 378 390 390 390 392 392 392 392 392 348 354 358 341 341 341 341 341 349 349 355 355 359 359 371 371 379 379 379 379 379 349 355 359 362 362 349-362 364-371 364 364 355-366 366 366 359-368 368 368 344 344 344 344 344 374 374 374 382 382 382 382 382 394 395

8450.100 8450.101 8450.102 8450.103 8450.104 8450.400 8450.401 8450.402 8450.500 8450.501 8450.502 8450.505 8450.506 8520.100 8520.101 8520.102 8520.200 8520.201 8520.202 8520.300 8520.301 8520.302 8520.350 8520.351 8520.352 8520.400 8520.401 8520.402 8520.500 8520.501 8520.502 8520.700 8520.701 8520.702 8520.703 8520.704 8520.705 8520.800 8520.801 8520.802 8520.803 8520.804 8521.202 8521.302 8521.352 8522.100 8522.101 8522.102 8522.201 8522.202 8522.301 8522.302 8522.351 8522.352 8522.401 8522.402 8522.500 8522.501 8522.502 8523.202 8523.302 8523.352 8524.101 8524.102

344 344 344 344 344 374 374 374 382 382 382 382 382 342 342 342 350 350 350 356 356 356 360 360 360 372 372 372 380 380 380 391 391 391 391 391 391 393 393 393 393 393 350 356 360 343 343 343 351 351 357 357 361 361 373 373 381 381 381 351 357 361 363 363

8424.200 8424.201 8424.202 8424.300 8424.301 8424.302 8424.350 8424.351 8424.352 843001 843002 843005 843006 8430.100 8430.101 8430.102 8430.103 8430.104 8430.200 8430.201 8430.202 8430.300 8430.301 8430.302 8430.350 8430.351 8430.352 8430.400 8430.401 8430.402

8434.200 8434.201 8434.202 8434.300 8434.301 8434.302 8434.350 8434.351 8434.352 8440.100 8440.101 8440.102 8440.103 8440.104 8440.400 8440.401 8440.402 8440.500 8440.501 8440.502 8440.505 8440.506 845001 845005

Code 8524.200 8524.201 8524.202 8524.300 8524.301 8524.302 8524.350 8524.351 8524.352 853001 853002 853005 853006 8530.100 8530.101 8530.102 8530.200 8530.201 8530.202 8530.300 8530.301 8530.302 8530.350 8530.351 8530.352 8530.400 8530.401 8530.402 8530.500 8530.501 8530.502 8530.601 8530.602 8530.700 8530.701 8530.702 8530.703 8530.704 8530.705 8530.800 8530.801 8530.802 8530.803 8530.804 8531.202 8531.302 8531.352 8532.100 8532.101 8532.102 8532.201 8532.202 8532.301 8532.302 8532.351 8532.352 8532.401 8532.402 8532.500 8532.501 8532.502 8532.601 8532.602

Page 351-363 365-373 365 365 357-367 367 367 361-369 369 369 394 394 395 395 340-386 340 340 348 348 348 354 354 354 358 358 358 370 370 370 378 378 378 386 386 390 390 390 390 390 390 392 392 392 392 392 348 354 358 341-387 341 341 349 349 355 355 359 359 371 371 379 379 379 387 387

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 6

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

8533.202 8533.302 8533.352 8534.101 8534.102

349 355 359 362 362 349-362 364-371 364 364 355-366 366 366 359-368 368 368 394 394 395 395 340-386 340 340 340 340 340 348 348 348 348 348 348 354 354 358 358 370 370 370 370 370 370 378 378 386 386 386 390 390 390 390 390 390 390 390 390 390 392 392 392 348 354 358 341-387 341

8542.102 8542.103 8542.105 8542.106 8542.201 8542.202 8542.203 8542.206 8542.301 8542.351 8542.401 8542.402 8542.403 8542.406 8542.500 8542.501 8542.601 8542.602 8542.603 8543.202 8543.301 8543.351 8544.101 8544.102 8544.103 8544.106

341 341 341 341 349 349 349 349 355 359 371 371 371 371 379 379 387 387 387 349 355 359 362 362 362 362 349-362 364-371 364 364 364 349-362 364-371 364 355-366 366 359-368 368 342 342 342 342 342 342 350 350 350 350 350 350 356 356 360 360 372 372 372 372 372 372 380 380 391 391

8550.702 8550.703 8550.704 8550.705 8550.706 8550.707 8550.708 8550.709 8550.800 8550.801 8550.802 8551.202 8551.301 8551.351 8552.100 8552.101 8552.102 8552.103 8552.105 8552.106 8552.201 8552.202 8552.203 8552.206 8552.301 8552.351 8552.401 8552.402 8552.403 8552.406 8552.500 8552.501 8553.202 8553.301 8553.351 8554.101 8554.102 8554.103 8554.106

391 391 391 391 391 391 391 391 393 393 393 350 356 360 343 343 343 343 343 343 351 351 351 351 357 361 373 373 373 373 381 381 351 357 361 363 363 363 363 351-363 365-373 365 365 365 351-363 365-373 365 357-367 367 361-369 369 394 394 340-386 340 340 340 340 340 340 340 340 348 348

8560.203 8560.204 8560.205 8560.206 8560.207 8560.208 8560.209 8560.300 8560.301 8560.302 8560.350 8560.351 8560.352 8560.400 8560.401 8560.403 8560.404 8560.405 8560.406 8560.407 8560.408 8560.409 8560.601 8560.602 8560.603 8560.604 8560.605 8562.100 8562.101 8562.103 8562.104 8562.105 8562.106 8562.107 8562.108 8562.109 8562.201 8562.203 8562.204 8562.205 8562.207 8562.208 8562.209 8562.301 8562.302 8562.351 8562.352 8562.401 8562.403 8562.404 8562.405 8562.407 8562.408 8562.409 8562.601 8562.602 8562.603 8562.604 8562.605 8564.101 8564.103 8564.104 8564.105 8564.107

348 348 348 348 348 348 348 354 354 354 358 358 358 370 370 370 370 370 370 370 370 370 386 386 386 386 386 341-387 341 341 341 341 341 341 341 341 349 349 349 349 349 349 349 355 355 359 359 371 371 371 371 371 371 371 387 387 387 387 387 362 362 362 362 362

8534.200 8534.201 8534.202 8534.300 8534.301 8534.302 8534.350 8534.351 8534.352 854001 854002 854005 854006 8540.100 8540.101 8540.102 8540.103 8540.105 8540.106 8540.200 8540.201 8540.202 8540.203 8540.205 8540.206 8540.300 8540.301 8540.350 8540.351 8540.400 8540.401 8540.402 8540.403 8540.405 8540.406 8540.500 8540.501 8540.601 8540.602 8540.603 8540.700 8540.701 8540.702 8540.703 8540.704 8540.705 8540.706 8540.707 8540.708 8540.709 8540.800 8540.801 8540.802 8541.202 8541.301 8541.351 8542.100 8542.101

8544.200 8544.201 8544.202 8544.203 8544.205 8544.206 8544.300 8544.301 8544.350 8544.351 8550.100 8550.101 8550.102 8550.103 8550.105 8550.106 8550.200 8550.201 8550.202 8550.203 8550.205 8550.206 8550.300 8550.301 8550.350 8550.351 8550.400 8550.401 8550.402 8550.403 8550.405 8550.406 8550.500 8550.501 8550.700 8550.701

8554.200 8554.201 8554.202 8554.203 8554.205 8554.206 8554.300 8554.301 8554.350 8554.351 856001 856002 8560.100 8560.101 8560.103 8560.104 8560.105 8560.106 8560.107 8560.108 8560.109 8560.200 8560.201

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 7

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

8564.108 8564.109

362 362 349-362 364-371 364 364 364 364 349-362 364-371 364 364 364 355-366 366 366 359-368 368 368 346 346 346 346 346 346 346 346 346 352 352 352 352 352 352 352 352 352 376 376 376 376 376 376 376 376 376 384 384 384 384 388 388 388 388 388 388 388 388 347-389 347 347 347 347 347

8618.106 8618.107 8618.108 8618.200 8618.201 8618.202 8618.203 8618.204 8618.205 8618.206 8618.207 8618.208 8618.400 8618.401 8618.402 8618.403 8618.404 8618.405 8618.406 8618.407 8618.408 8618.500 8618.501 8618.502 8618.503 8618.601 8618.602 8618.603 8618.604 8618.605 8637.100 8637.101 8637.102 8637.103 8637.104 8637.105 8637.106 8637.107 8637.108 8637.109 8637.110 8637.200 8637.201 8637.202 8637.203 8637.204 8637.205 8637.206 8637.207 8637.208 8637.209 8637.210 8637.400 8637.401 8637.402 8637.403 8637.404 8637.405 8637.406 8637.407 8637.408 8637.409 8637.410 8637.500

347 347 347 353 353 353 353 353 353 353 353 353 377 377 377 377 377 377 377 377 377 385 385 385 385 389 389 389 389 389 346 346 346 346 346 346 346 346 346 346 346 352 352 352 352 352 352 352 352 352 352 352 376 376 376 376 376 376 376 376 376 376 376 384

8637.501 8637.502 8637.503 8637.504 8637.505 8637.600 8637.601 8637.602 8637.603 8637.604 8637.605 8637.606 8637.607 8637.608 8637.609 8637.610 8638.100 8638.101 8638.102 8638.103 8638.104 8638.105 8638.106 8638.107 8638.108 8638.109 8638.110 8638.200 8638.201 8638.202 8638.203 8638.204 8638.205 8638.206 8638.207 8638.208 8638.209 8638.210 8638.400 8638.401 8638.402 8638.403 8638.404 8638.405 8638.406 8638.407 8638.408 8638.409 8638.410 8638.500 8638.501 8638.502 8638.503 8638.504 8638.505 8638.601 8638.602 8638.603 8638.604 8638.605 88630 88650 88651 89001

384 384 384 384 384 388 388 388 388 388 388 388 388 388 388 388 347-389 347 347 347 347 347 347 347 347 347 347 353 353 353 353 353 353 353 353 353 353 353 377 377 377 377 377 377 377 377 377 377 377 385 385 385 385 385 385 389 389 389 389 389 203-265 397 397 60-338

89010 89011 89109 89110 90C/111 90C/51 90C/71 90D/111 90D/21 90D/51 90D/71 90DV/21 90F/111 90F/451 90F/51 90F/71 91C/111 91C/701 91C/71 91F/111 91F/451 91F/71 92C/111 92C/71 92F/451 95D/61 971.011 971.102 971.111 973.913 973.917 973.920 973.925 973.930 973.935 974.912 974.915 974.920 974.925 974.930 974.935 974.1015 974.1020 974.1024 974.1028 974.1030 975.902 975.915 975.920 975.925 975.927 975.1002 975.1012 975.1018 975.1022 975.1027 975.1030 985.606 985.612 985.618 985.620 985.625 985.630 985.640

338 338 339 339 304 170-301 171-302 305 314 301 303 314 305 240-309 170-301 171-303 304 241-310 171-302 305 240-309 171-303 305 303 309 320 405 404 405 409 409 409 409 409 409 409 409 409 409 409 409 409 409 409 409 409 404 409 409 409 409 404 409 409 409 409 409 404 407 407 407 407 407 407

8564.200 8564.201 8564.203 8564.204 8564.205 8564.206 8564.207 8564.208 8564.209 8564.300 8564.301 8564.302 8564.350 8564.351 8564.352 8617.100 8617.101 8617.102 8617.103 8617.104 8617.105 8617.106 8617.107 8617.108 8617.200 8617.201 8617.202 8617.203 8617.204 8617.205 8617.206 8617.207 8617.208 8617.400 8617.401 8617.402 8617.403 8617.404 8617.405 8617.406 8617.407 8617.408 8617.500 8617.501 8617.502 8617.503 8617.600 8617.601 8617.602 8617.603 8617.604 8617.605 8617.606 8617.607 8618.100 8618.101 8618.102 8618.103 8618.104 8618.105

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 8

Index Articles Code

Page

Code

Page

Code

Page

Code

Page

985.650 985.906 985.912 985.918 985.920 985.925 985.930 985.940 985.950 986.106 986.110 986.115 986.120 986.125 986.130 986.140 986.150 986.160 986.406 986.410 986.415 986.420 986.425 986.430 986.440 986.450 986.460 987.115 987.120 987.130 987.140 987.415 987.420 987.430 987.440 988.106 988.115 988.120 988.130 988.406 988.415 988.420 988.430 9910.315 9910.320 9910.325 9910.330 9911.306 9911.310 9911.315 9911.320 993.201 993.202

407 404 407 407 407 407 407 407 407 404 406 406 406 406 406 406 406 406 404 407 407 407 407 407 407 407 407 406 406 406 406 407 407 407 407 404 406 406 406 404 407 407 407 409 409 409 409 404 409 409 409 404 404

993.502 993.504 993.511 993.512 993.516 993.518 994.512 994.517 994.612 994.712 994.717 994.812 995.206 995.211 995.212 995.217 995.218 995.312 995.313 995.317 995.318 995.412 995.506 995.512 995.518 995.520 995.525 995.530 995.540 995.550 995.606 995.618 995.625 995.630 995.701 995.702 995.706 995.710 995.715 995.720 995.725 995.730 995.806 995.812 995.818 995.820 995.825 995.830 995.840 995.850 995.906 995.918 995.925

404 404 408 408 408 408 406 406 406 406 406 406 404 405 405 405 405 408 405 408 405 405 404 406 406 406 406 406 406 406 404 406 406 406 404 404 404 408 408 408 408 408 404 406 406 406 406 406 406 406 404 406 406

995.930 996.210 996.215 996.220 996.225 996.230 996.240 996.250 996.260 996.270 996.280 996.290 996.2100 996.301 996.302 996.304 996.306 996.310 996.311 996.315 996.316 996.320 996.321 996.325 996.326 996.330 996.331 996.340 996.341 996.350 996.351 996.360 996.361 996.370 996.371 996.380 996.381 996.390 996.391 996.399 996.3100 996.406 996.415 996.425 996.706 996.730 996.740 996.750 996.760 996.770 996.780 996.790 996.7100

406 405 405 405 405 405 405 405 405 405 405 405 405 404 404 404 404 408 405 408 405 408 405 408 405 408 405 408 405 408 405 408 405 408 405 408 405 408 405 405 408 404 405 405 404 408 408 408 408 408 408 408 408

996.806 996.820 996.825 997.215 997.220 997.230 997.240 997.250 997.260 997.315 997.320 997.330 997.340 997.350 997.360 997.420 997.505 997.515 997.520 997.530 997.540 997.550 997.560 997.815 997.820 997.830 997.835 997.840 997.850 997.860 998.215 998.220 998.230 998.240 998.315 998.320 998.330 998.340 998.406 998.501 998.502 998.506 998.515 998.520 998.530 998.540 998.806 998.815 998.820 998.830 998.840

404 409 409 405 405 405 405 405 405 405 405 405 405 405 405 405 404 408 408 408 408 408 408 409 409 409 409 409 409 409 405 405 405 405 405 405 405 405 404 404 404 404 408 408 408 408 404 409 409 409 409

CATALOGO 217 pag 38-45 RAASM

29-06-2006

14:23

Pagina 9

Conversion Table Articles Hose Reels and Hoses Ex

New

81401 81411 81417 81501 81507 81510 81511 81512 81514 81601 81610 81615 81701 81712 81716 81718 81719 81720 81807 81812 81818 82001 82007 82010 82011 82012 82014 82100 82110 82115 82201 82211 82217 82301 82310 82315 82316 82319 82320

8430.300 8430.301 8430.302 8430.400 8430.104 8430.101 8430.102 8430.401 8430.402 8430.500 8430.501 8430.502 8434.300 8432.301 8433.302 8432.302 8434.200 8433.202 8432.104 8432.101 8432.102 8420.400 8420.104 8420.101 8420.102 8420.401 8420.402 8420.500 8420.501 8420.502 8420.300 8420.301 8420.302 8424.300 8422.301 8422.302 8423.302 8424.200 8423.202

82407 82412 82418 83101 83107 83110 83111 83112 83114 83201 83210 83215 87201 87225 87401 87417 87620 87625 87714 87715 87720 88201 88220 88225 88320 88325 88401 88414 88415 88420 88501 88525 88526 88601 88627 88701 88717 88801 88814

8422.104 8422.101 8422.102 8440.400 8440.104 8440.101 8440.102 8440.401 8440.402 8440.500 8440.501 8440.502 8520.300 8520.302 8540.200 8541.202 8522.101 8522.102 8542.403 8542.401 8542.402 8520.400 8520.101 8520.102 8520.401 8520.402 8540.400 8540.403 8540.401 8540.402 8524.300 8522.302 8523.302 8524.200 8523.202 8544.200 8543.202 8540.100 8540.603

88815 88820 89101 89111 89112 89201 89215 89216 89217 89220 89221 89301 89320 89324 89325 89326 89327 89330 89331 89335 89336 89400 89401 89500 89501 90100 90114 91200 91202 91204 91210 91215 91216 91220 91225 91226 91315 91320 91325

8540.601 8540.602 8420.700 8420.702 8420.701 8520.700 8520.703 8520.705 8520.701 8520.702 8520.704 8540.700 8540.707 8540.701 8540.704 8540.708 8540.709 8540.702 8540.705 8540.703 8540.706 8424.300 8424.200 8524.300 8524.200 998.506 998.315 996.306 996.302 996.304 996.310 996.315 996.415 996.320 996.325 996.425 996.215 996.220 996.225

91400 91402 91404 91412 91418 93405 93415 93420 93700 93712 93718 93912 93918 93925 93926 96102 96111 98113 98117 98120 98125 98130 98135 98212 98215 98220 98225 98230 98235 98302 98315 98320 98325 98327 99115 99120 99200 99215

995.706 993.502 993.504 993.512 993.518 997.505 997.315 997.320 995.506 995.212 995.218 995.512 995.518 995.525 995.625 971.102 971.111 973.913 973.917 973.920 973.925 973.930 973.935 974.912 974.915 974.920 974.925 974.930 974.935 975.902 975.915 975.920 975.925 975.927 997.815 997.820 998.806 998.815

The conversion only concerns the articles codes, whereas the product remains unchanged.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:24

Pagina 46

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:24

Pagina 47

47 470

BRAKE BLEEDING - WASHING - INFLATING

BRAKE-CLUTCH BLEEDING

110 page 48

PRESSURE SPRAYERS

page

WASHING TANK

page

TYRE INFLATOR

page

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:24

Pagina 48

BRAKE-CLUTCH BLEEDING EQUIPMENT

100 48 480 480

with two chambers The simplified air-operated two-chamber brake bleeding device is suitable for bleeding the hydraulic brakes and clutches of all motor vehicles. Bleeding can be carried out in a few minutes by just one person. The brake-bleeding device is equipped with an elastic inner membrane which hermetically separates the oil from the air, thus avoiding the risk of emulsion. It is also suitable for systems with braking control and ABS (max. at 1 bar).

Art. 10105 (l 5) Art. 10205 (l 5) Art. 10207 (l 5) Art. 10105

BRAKE-BLEEDING SECTION

Two-chamber brake-clutch bleeding device, complete with: - Art. 10801 two collection containers - filler funnel No. 1 packing

m 3 0,070

1 Tank capacity 5 l

kg 8,5

3 Air oil tank elastic membrane

Art. 10205 Two-chamber brake-clutch bleeding device, complete with: - Art. 11001 set of plugs (see page 50) - Art. 10802 clutch bleeding tube - Art. 10801 two collection containers - filler funnel No. 1 packing

m 3 0,070

kg 9,5

4 2 Air “expansion” tank (low pressure)

Filler cap with reserve indicator

Art. 10207 Two-chamber brake-clutch bleeding device, complete with: - Art. 11004 set of plugs (see page 51) - Art. 10802 clutch bleeding tube - Art. 10801 two collection containers - filler funnel No. 1 packing

m 3 0,070

kg 9,7

The brake-bleeding device is equipped with an elastic inner membrane (3) which hermetically separates the oil contained in the oil tank (1), from the air contained in the air “expansion” tank (2), thus avoiding the risk of emulsion (working pressure 1 - 2 bar controllable on the upper pressure gauge).

TECHNICAL TABLE Tank capacity (upper chamber)

Oil max working pressure (lower chamber)

2 bar

Delivery hose length

Safety valve (max pressure)

3 bar

The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:27

Pagina 49

BRAKE-CLUTCH BLEEDING EQUIPMENT

49 101 490 490

with three chambers The air-operated three-chamber brake bleeding device is suitable for bleeding the hydraulic brakes and clutches of all motor vehicles. The pressurised (8 - 10 bar) air reserve chamber enables several bleeding operations to be carried out without having to recharge the device. The brake-bleeding device is equipped with an elastic inner membrane which hermetically separates the oil from the air, thus avoiding the risk of emulsion. It is also suitable for systems with braking control and ABS (max. at 1bar).

Art. 10705 (l 5) Art. 10805 (l 5) Art. 10807 (l 5) Art. 10705

BRAKE-BLEEDING SECTION

Three-chamber brake-clucth device, complete with: - Art. 10801 two collection containers - filler funnel No. 1 packing

m 3 0,070

Three-chamber brake-clutch bleeding device, complete with: - Art. 11001 set of plugs (see page 50) - Art. 10802 clutch bleeding tube - Art. 10801 two collection containers - filler funnel m 3 0,070

Tank capacity 5 l

kg 10,2

Art. 10805

No. 1 packing

kg 11,2

2 Air oil tank elastic membrane

3 Pressure regulator

4 Filler cap with reserve indicator 5 Air “expansion” tank (low pressure)

6 Air “reserve” tank (high pressure)

Art. 10807 Three-chamber brake-clutch bleeding device, complete with: - Art. 11004 set of plugs (see page 51) - Art. 10802 clutch bleeding tube - Art. 10801 two collection containers - filler funnel No. 1 packing

m 3 0,070

kg 11,4

TECHNICAL TABLE Tank capacity (upper chamber)

Oil max working pressure (middle chamber)

2 bar

Reserve tank max pressure (lower chamber)

10 bar

Delivery hose length

Safety valve (max pressure)

10 bar

The brake-bleeding device is equipped with an elastic inner membrane (2) which hermetically separates the oil contained in the oil tank (1), from the air contained in the air “expansion” tank (5), thus avoiding the risk of emulsion. It is also equipped with a third air reserve tank (high pressure air 8-10 bar) (6) which, delivered by means of a pressure regulator (3), enables several bleeding operations to be carried out at a constant pressure without having to recharge the device. The oil tank (4) filler cap is equipped with a “reserve indicator” that signals when the fluid is finishing, and an air venting valve to be used in the device activation phase.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

50 500

9:27

Pagina 50

SCREW CONNECTION PLUGS Art. 11001 Series of standard screw connection plugs, supplied with Art. 10205 or Art. 10805 (refer to page. 48 - 49), consisting of: - 5 screw plugs: 11000/A/D/F/I/T - 1 universal plug 11000/W Note: the above plugs can also be supplied individually. The universal plug W can be used on many types of cars and trucks in addition to those given in the plug list (refer to page 53)

APPLICATION EXAMPLES OF UNIVERSAL PLUG 11000/W

Art. 11001 Art. 11002 Series of special screw connection plugs, consinting of: 11000/B/C/E/G/H/K/L/M/P/R/U/X/Y/Z Note: The series of special plugs is only supplied by request

Art. 11002 LIST OF SCREW PLUGS SUPPLIABLE INDIVIDUALLY A

Article

Plug series

Diameter (A) mm

11000/M

type M

68,5

type B

21,5

11000/P

type P

11000/C

type C

26,5

11000/R

type R

33,5

11000/D

type D

11000/T

type T

11000/E

type E

11000/U

type U

11000/F

type F

52,5

11000/X

type X

44,5

11000/G

type G

11000/Y

type Y

34,5

11000/H

type H

41,5

11000/Z

type Z

58,5

11000/I

type I

Article

Plug series

Diameter (A) mm

11000/A

type A

11000/B

11000/W Universal plug W with 3 tapered plugs:

11000/K

type K

61,5

1) ø 20 mm 2) ø 28 mm

11000/L

type L

76,5

3) ø 45 mm

Note: To choose the connection plug see the “Brake bleeder plug list” tables (refer to page 53)

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:27

Pagina 51

51 510

PRESSURE CONNECTION PLUGS Art. 11004

Adjustable universal bracket (Art.11003) with series of pressure plugs 11003/1/2/3/4/5/6/7/8/9

APPLICATION EXAMPLES OF UNIVERSAL PRESSURE PLUGS

Art. 11004 LIST OF PRESSURE PLUGS SUPPLIABLE INDIVIDUALLY Article

Plug series

Diameter (A) mm

11003/1

pressure

42,2 42,5

11003/2

pressure

42,8

11003/3

pressure

53,8 54,0

11003/4

pressure

56,0

11003/5

pressure

65,7

11003/6

pressure

74,2

11003/7

pressure

58,8

11003/8

pressure

33,7

11003/9

pressure

35,8

Article

11003 Adjustable universal bracket for pressure plugs.

10801 Brake fluid collection containers, complete with transparent tube and 90° flexible attachment for connection to the bleeder valve.

10802 Clutch bleeding connection tube, length 600 mm.

Note: Po choose the connection plug see the “Brake bleeder plug list” tables (refer to page 53)

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

52 520

9:27

Pagina 52

BLEEDING OPERATIONS BRAKING SYSTEM BLEEDING PHASE

Fill the brake fluid reservoir by means of the quick-release connector. Apply the required connection plug on the reservoir. Connect the brake bleeding device by means of the quick-releaser connector. Pressurise the braking system to approximately. 2 bar and proceed with the bleeding operation. For vehicles with ABS the max. pressure is 1 bar. Note: Start bleeding from the rear wheels especially if the vehicle is equipped with a braking control.

TRUCK CLUTCH SYSTEM BLEEDING PHASE

The bleeding of hydraulic clutches of trucks must be carried out by inverting the connections with respect to the brake bleeding operation. Connect the brake bleeder device to the clutch bleeder valve. Apply the required connection plug on the clutch fluid reservoir. Connect the collection container to the required connection plug by means of the special tube.

PROCEDURES FOR APPLYING THE CONNECTION PLUGS

Before bleeding it is important to fill the brake fluid reservoir by means of the brake bleeder quick-release connector.

The extended nozzle of the plug must be immersed in the fluid to avoid sprays or air and oil emulsions.

Connect the brake bleeding device to the reservoir by means of the quick-release connector.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:27

Pagina 53

53 530

Car model

List of screw plugs 11000 / A B C D E F G H I K L M P R T U X Z

universal plug

LIST OF BRAKE BLEEDER PLUGS

List of pressure plugs 11003 / 1

5 6

ALFA AUDI AUSTIN MORRIS AUTOBIANCHI BMW CITROEN CHRYSLER DAEWOO FERRARI FIAT FORD HONDA HYUNDAI INNOCENTI JAGUAR JEEP KIA LAMBORGHINI LADA LANCIA LAND ROVER LEXUS LEYLAND MASERATI MITSUBISHI MAZDA MERCEDES MG NISSAN OPEL PEUGEOT PORSCHE RENAULT ROVER SAAB SEAT SUBARU SUZUKI TALBOT TOYOTA TRIUMPH VAUXHALL VOLKSWAGEN VOLVO

Trucks

List of screw plugs 11000 / A B C D E F G H I K L M P R T U X Z

ASTRA BEDFORD BERLIET DAF EBRO FIAT FORD IVECO MAGIRUS MERCEDES PEGASO RENAULT SAVIEM SCANIA UNIC VOLVO

Important: The above pressure plugs can replace the majority of screw plugs, as well as the universal plug W, for cars and trucks.

Note: The vehicles on which bleeding operations with standard series plugs Art. 11001 can be carried out are highlighted (in yellow)

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

54 540

9:27

Pagina 54

NON-TOXIC PRESSURE SPRAYERS painted steel

Devices for the non-toxic spraying of low viscosity detergent liquids, such as lubrication oils and similar. Suitable for washing motor vehicles, graphiting, lubricating, delivering dismantling oils, etc. Filled to 3/4 their capacity with the required liquid and pressurised with air at 6-8 bar, they work independently without requiring continuous connection to the compressed air line.

Art. 22024 (l 24)

Art. 22017 (l 16)

Art. 22017

EXAMPLES OF USE

Portable pressure sprayer with 16-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,080

Spraying antioxidant, oil, diesel oil on mechanical parts

kg 9,8

Art. 22024 Wheel-mounted pressure sprayer with 24-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,090

Spraying detergent for washing engines

kg 13

Art. 24805 Standard spray gun with EPDM seals

Spraying detergents or protective products for machine tools

Art. 24801 Standard spray nozzle (equipped with filter) with delivery of approx. 1 - 1.5 l/min.

Caution: Do not use with flammable or corrosive liquids

Spraying detergent for washing cars and trucks

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:27

Pagina 55

STAINLESS STEEL NON-TOXIC PRESSURE SPRAYERS stainless steel AISI 304 Devices for stainless steel for the non-toxic spraying of low viscosity liquids such as detergents, lubrication oils and similar. Suitable for spraying disinfectants for agriculture, animal breeding, gardening, food, etc. Filled to 3/4 their capacity with the liquid and pressurised with air at 6-8 bar, they work independently without requiring continuous connection to the compressed air line.

Art. 23025 (l 24)

Art. 23024 (l 24)

Art. 23024

EXAMPLES OF USE

Painted stainless steel wheel-mounted pressure sprayer with 24-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,090

Spraying of detergent or disinfectant in places containing food

kg 12,8

Art. 23025 Stainless steel wheel-mounted pressure sprayer with 24-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,090

Spraying of detergent for washing engines

kg 12,8

Art. 24806 Stainless steel standard spray gun with EPDM seals

Spraying of detergent in slaughter-houses

Art. 24891 Funnel with antisplash rim to prevent the liquid from spilling out when filling the tank.

Important: The stainless steel pressure sprayer can also be used with acid-base products such as sulphuric, nitric, muriatic, phosphoric acid. Make sure to choose a product that does not tend to separate and with a dilution percentage not exceeding 15 - 20%

Spraying of detergent for washing public places

55 550

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 56

WASHING TANK

56 560

Universal washing tank for quick washing of mechanical parts and components in general. The lowpressure pneumatic system enables: - continuous liquid detergent flow with brush for thorough washing - washing by dipping, with the parts dipped in the liquid detergent in the tank.

removable cover

Art. 70365 (l 65) Art. 70365

No. 2 packing

70365

Article

Universal washing tank with removable cover fitted on the 65-litre wheel-mounted tank. Two spare brushes Art. 70809 are supplied with the washing tank m 3 0,290

kg 47,1

Tank capacity

65 l

Washing tank capacity

50 l

Max working pressure

0,5 bar

Required quantity of liquid

50 l

Max blowing gun pressure

12 bar

Art. 70809

OVERALL DIMENSIONS

Knurled bristle brush for facilitating removal of dirt

510

1060

200

660

Important: Do not use corrosive liquids with flashpoint below 55°C, that can give off toxic and harmful fumes. Use specific chemical products for washing mechanical parts, according to the instructions supplied by the manufacturer.

600

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 57

57 570

DETAILS AND ADVANTAGES

For correct use, add 48 - 52 litres of detergent liquid

The pneumatic systems works at low pressure 0.5 bar, consuming very little air

Washing with brush, with continuous liquid flow

Dip washing, with parts placed in the tank

Brush or dip wash management unit

Decanting filter/screen

The possibility of collecting liquid in the tank guarantees the following advantages: - easy moving of tank without risk of liquid spilling out - no evaporation of liquid during idle periods - easy recovery of old liquid - decanting of the product inside the tank for always having a clean liquid

Draining cock Total emptying plug (under the tank)

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

58 580

9:28

Pagina 58

PORTABLE TYRE INFLATOR automatic

Type-approved tyre inflator for checking and restoring the pressure of any type of tyre. The 13-litre tank is equipped with an automatic charging device for always being ready for use (indispensable and handy at service stations).

automatic charger

EEC approval certificate

Art. 52013 (l 13)

Art. 52013 Type-approved automatic charging tyre inflator with 13-litre tank equipped with: - type-approved pressure gauge ø 80 mm - Art. 52020 automatic charger No. 1 packing

m 3 0,088

The tyre inflation and deflating operations are done with single 3-position lever 1 idle

2 deflate

kg 8,8

3 inflate

Pressure gauge ø 80 mm, type-approved, supplied with the inflating group

Art. 52020 Automatic charger for tyre inflator

OVERALL DIMENSIONS

INSTALLATION MEASURES 250 300

900 - 950

770

In order to have the tyre inflator always ready for use, just place it on the automatic charger as shown in the illustration

310

Note: Type-approved for public use

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 59

PORTABLE TYRE INFLATORS

59 590

standard Tyre inflator for checking and restoring the pressure of any type of tyre. The 13 and 24-litre tanks are with standard charging. Tyre pressure checking and inflation operations are carried out with the gun equipped with pressure gauge ø 60 mm with scale 0 - 10 bar.

Art. 52024 (l 24) Art. 53024 (l 24) Art. 52015 (l 13) Art. 53016 (l 13)) Art. 52015

Art. 53016

Standard charging portable tyre inflator with 13-litre tank equipped with: - gun with pressure gauge ø 60 mm

Standard charging wheel-mounted tyre inflator with 13-litre tank equipped with: - gun with type-approved pressure gauge ø 60 mm

No. 1 packing

m 3 0,088

kg 6,5

m 3 0,088

No. 1 packing

kg 6,5

Art. 52024

Art. 53024

Standard charging wheel-mounted tyre inflator with 24-litre tank equipped with: - gun with pressure gauge ø 60 mm

Standard charging wheel-mounted tyre inflator with 24-litre tank equipped with: - gun with type-approved pressure gauge ø 60 mm

No.1 packing

m 3 0,090

kg 10

Pressure gauge ø 60 mm, not type-approved, supplied with the inflating gun

No. 1 packing

m 3 0,090

kg 10

Pressure gauge ø 60 mm, type-approved, supplied with the inflating gun

600

860

OVERALL DIMENSIONS

Tyre pressure control and/or inflation operations are carried out with the inflating gun Note: Not type-approved for public use

310

280

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

60 600

9:28

Pagina 60

TYRE INFLATOR HOSE REEL

Inflation system with hose reel for checking and restoring the pressure of any type of tyre by means of the inflation gun equipped with pressure gauge ø 60 mm with scale 0 - 10 bar. Constant connection to the compressed air system makes the inflation system always ready for use. The hose reel is equipped with a system for quick hooking to the wall support to facilitate possible moving.

SUPER

Art. 52010 Art. 52010 Inflation system comprising: - Art. 89010 hose reel - inflation gun with pressure gauge ø 60 mm, type-approved - Art. 89001 bayonet hooking support

Article

52010

Length of hose used

11 m

Length of connection hose

1,5 m

Hose diameter

ø8 x ø12 mm

Inlet connection thread

M 1/4” G

Max. working pressure

10 bar

Art. 89001

Pressure gauge ø 60 mm

Type app. 0-10 bar

Bayonet hooking support. The placing of several supports in various service points enables easy moving of the hose reel which is equipped with a quick-release bayonet hooking system.

Operating temperature

-20° +60°C

No. 1 packing

m 3 0,019

kg 6,8

Pressure gauge ø 60 mm type-approved, supplied with the inflating gun

DETTAGLI E VANTAGGI Rewinding spring

Self-lubricating hose guide rollers

Hose stop

Locking pawl for automatic stopping of hose at required length

Fluid conveyor joint

Swivel bracket with bayonet joint

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 61

61 610

EASY APPLICATION QUICK HOOKING OF HOSE REEL Bayonet bracket Art. 89001 easy to mount on wall

Step 1

Inserting the hose reel in the wall support

Quick connection to compressed air system

Step 2

Quick connection to compressed air system

Handle for easy carrying (lightweight)

QUICK RELEASE OF HOSE REEL Handle for easy carrying (lightweight)

Step 2 Step 1

Unhooking hose reel from wall support

Disconnecting from compressed air system

Fig. 2

Fig. 1

GASOLINE

Fig. 1 The inflation hose reel is provided with a wall bracket with automatic bayonet hooking (Art. 89001) enabling very quick and easy installation or shifting. The ease of this operation enables - also for safety reasons - the hose reel to be put away in a closed place at the end of the working day. Also, the application of a wall support for every service point, either inside or outside, facilitates quick shifting and application of the hose reel in the workstation required by the operator. Fig. 2 To prevent removal or theft of the hose reel it can be locked with a bolt or padlock.

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 62

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

Pagina 63

WASTE OIL SUCTION-DRAINERS

63 630

GRAVITY DRAINERS

page

SUCTION POWER

110 page 76

WHEEL-MOUNTED - PORTABLE SUCTION-DRAINERS

COMBINED SUCTION-DRAINERS

SUCTION-DRAINERS

UNIVERSAL PANTOGRAPH

SUCTION DRAINER-DISPENSERS

WITH AIR-OPERATED AND DIAPHRAGM PUMP

PROBES AND ACCESSORIES

page

110 page 84

page

100

CATALOGO LIST 217 pag 33-64 GB ok

23-06-2006

9:28

64 640

Pagina 64

PIT OIL DRAINERS

Pit waste oil drainers. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on a pit. Equipped with antisplash screen which can be used as a support for draining oil filters.

Art. 42061 (l 110) Art. 42062 (l 110)

removable splashguard

adjustable carriage

Art. 42059 (l 65) Art. 42060 (l 65)

Art. 42059

Art. 42061

Pit waste oil drainer, 65-litre capacity, equipped with quick-release connector

Pit waste oil drainer, 110-litre capacity, equipped with quick-release connector

No. 1 packing

m 3 0,140

kg 27,3

m 3 0,235

No. 1 packing

kg 39

Art. 42060

Art. 42062

Pit waste oil drainer, 65-litre capacity, equipped with hose-holder ø 30

Pit waste oil drainer, 110-litre capacity, equipped with hose-holder ø 30

No. 1 packing

m 3 0,140

kg 27,1

m 3 0,235

No. 1 packing

kg 38

OVERALL DIMENSIONS

Antisplash screen

The drained oil can be transferred from the collection bowl to the storage tank by gravity or by using an emptying pump connected to the fixed system (refer to page 186-187)

A B

emptying pump

Caution: Do not use flammable or corrosive liquids

Article

42059 - 42060

750

1200

510

580

660

220

42061 - 42062

840

1250

628

760

788

304

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:30

Pagina 65

FLOOR OIL DRAINERS

65 650

Wheel-mounted floor waste oil drainers, suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles. Equipped with antisplash screen which can be used as a support for draining oil filters.

Art. 42072 (l 95) Art. 42073 (l 95)

Art. 42069 (l 50) Art. 42070 (l 50) Art. 42069

Art. 42072

Floor waste oil drainer, 50-litre capacity, equipped with quick-release connector

Floor waste oil drainer, 95-litre capacity, equipped with quick-release connector

No. 1 packing

m 3 0,136

kg 19,0

m 3 0,200

No. 1 packing

kg 34

Art. 42070

Art. 42073

Floor waste oil drainer, 50-litre capacity, equipped with suction tube

Floor waste oil drainer, 95-litre capacity, equipped with pump Art. 33070 (see page 163)

No. 1 packing

m 3 0,136

kg 18,8

m 3 0,200

No. 1 packing

Antisplash screen

kg 39

OVERALL DIMENSIONS

Caution: Do not use flammable or corrosive liquids

The drained oil can be transferred from the collection bowl to the storage tank by suction with the incorporated probe or by an emptying pump connected to the fixed system (refer to page 186-187)

emptying pump

Article

42069 - 40270

780

660

510

630

235

42072 - 42073

1130

988

628

725

200

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:30

66 660

Pagina 66

DRUM OIL DRAINERS wheel-mounted for drums 20 - 220 kg

15 litre adjustable bowl

Wheel-mounted waste oil drainers. Ideal for use with jerry cans, drums and containers of various sizes, up to 220 kg. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit. The height-adjustable bowl (15 litres) is mounted on a swivel joint that facilitates positioning.

Art. 42000 (Kg 180 - 220)

Art. 42050 (Kg 20 - 60) Art. 42050

OVERALL DIMENSIONS

Waste oil drainer for 20 - 60 kg drums, consisting of: - Art. 80050 trolley for 20 - 60 kg containers - collection bowl with oversize funnel - antisplash screen/filter No. 2 packing

m 3 0,120

total operating range of bowl 780 mm ø bowl 580 mm

kg 17

Art. 42000

m 3 0,150

kg 29

No. 2 packing

Waste oil drainer for 180 - 220 kg drums, consisting of: - Art. 80200 trolley for 180 - 220 kg drums - collection bowl with oversize funnel - antisplash screen/filter - drum clamping ring

As well as serving as a filter for small residuals, bolts, etc., the antisplash screen is also a useful support for draining the changed filters.

Caution: Do not use flammable or corrosive liquids

Article

42000

1300

1800

42050

1200

1800

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:30

Pagina 67

DETAILS AND ADVANTAGES

Removable oversize funnel Antisplash screen

Adjustable bowl to increase operating range

Bowl closing valve

Bowl clamping ring

Bowl adjustment support

Trolley platform suitable for any type of container or drum up to 60 kg

67 670

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

68 680

9:30

Pagina 68

OIL DRAINERS WITH TANK with central bowl

Waste oil drainers with wheel-mounted tank. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit. The bowl (15 litres) with heightadjustable central support is mounted on a swivel joint that facilitates positioning.

Art. 42090 (l 90)

Art. 42065 (l 65) Art. 42065

Art. 42115

Waste oil drainer with wheel-mounted 65-litre tank, equipped with: - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

Waste oil drainer with wheel-mounted 115-litre tank, equipped with: - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

No. 2 packing

m 3 0,270

kg 33

No. 2 packing

m 3 0,420

kg 42

Art. 42090 Waste oil drainer with wheel-mounted 90-litre tank, equipped with: - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray No. 2 packing

m 3 0,300

kg 34

Caution: Do not use flammable or corrosive liquids

42065

42090

42115

Tank capacity

65 l

90 l

115 l

Max. collection capacity

52 l

75 l

97 l

Bowl capacity

15 l

ø 580 mm

Article

Diameter oversize funnel

Max. height

1780 mm

1900 mm

1920 mm

Min. height

1270 mm

1400 mm

1420 mm

Draining pressure

0,5 bar

Length draining hose

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:30

Pagina 69

69 690 OVERALL DIMENSIONS total operating range of bowl 780 mm

Height-adjustable central support

ø bowl 580 mm

Article

42065

1270

1780

42090

1400

1900

42115

1420

1920

Note: Kit for draining tank with pump (refer to page 186)

Art. 42115 (l 115) DETAILS AND ADVANTAGES

Removable oversize funnel Bowl closing cock

Antisplash screen Adjustable bowl to increase operating range

Bowl height adjustment tube clamping ring

Removable tool tray

Level indicator with scale in litres and gallons

Unit with safety valve 1 bar, and universal valve 1/4” G Tank draining valve

Stable and handy wheel-mounted base

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

70 700

9:30

Pagina 70

OIL DRAINERS WITH TANK with central bowl

Waste oil drainers, with wheel-mounted tank equipped with air inlet pressure regulator and quick-release connector for emptying the drained oil. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit.The bowl (15 litres) with height-adjustable central support is mounted on a swivel joint that facilitates positioning.

Art. 42088 (l 90) Art. 42089 (l 90)

Art. 42063 (l 65) Art. 42064 (l 65) Art. 42063

Art. 42064

Waste oil drainer with wheel-mounted 65-litre tank, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

Waste oil drainer with wheel-mounted 65-litre tank and air inlet pressure regulator, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

No. 2 packing

m 3 0,270

kg 33

No. 2 packing

m 3 0,270

kg 33

Art. 42088

Art. 42089

Waste oil drainer with wheel-mounted 90-litre tank, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

Waste oil drainer with wheel-mounted 90-litre tank and air inlet pressure regulator, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

No. 2 packing

m 3 0,300

kg 34

No. 2 packing

m 3 0,300

kg 34

Art. 42113

Art. 42114

Waste oil drainer with wheel-mounted 115-litre tank, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

Waste oil drainer with wheel-mounted 115-litre tank and air inlet pressure regulator, equipped with: - quick-release connector for emptying the tank - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

No. 2 packing

m 3 0,420

kg 42

Caution: Do not use flammable or corrosive liquids

No. 2 packing

m 3 0,420

kg 42

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 71

71 710 OVERALL DIMENSIONS total operating range of bowl 780 mm

Height-adjustable central support

ø bowl 580 mm

Article

42063 - 42064 1270 1780 42088 - 42089 1400 1900 42113 - 42114 1420 1920

Article

Art. 42113 (l 115) Art. 42114 (l 115)

Note: Kit for draining tank with pump (refer to page 186)

Quick-release connector for emptying the drained oil

Pressure regulator with pressure gauge for regulating the inlet compressed air pressure

42063 - 42064

42088 - 42089

42113 - 42114

Tank capacity

65 l

90 l

115 l

Max. collection capacity

52 l

75 l

97 l

Bowl capacity

15 l

Diameter oversize funnel

ø 580 mm

Max. height

1780 mm

1900 mm

1920 mm

Min. height

1270 mm

1400 mm

1420 mm

Draining pressure

0,5 bar

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

72 720

9:31

Pagina 72

OIL DRAINERS WITH TANK with side bowl

Waste oil drainers, with wheel-mounted tank. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit. The bowl (15 litres) with side support offers greater manoeuvrability of the drainer even in difficult positions. The height-adjustable bowl is mounted on a swivel joint that facilitates positioning.

Art. 42066 (l 65)

Art. 42091 (l 90)

Art. 42066

Art. 42116

Waste oil drainer with wheel-mounted 65-litre tank and side bowl, equipped with: - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray

Waste oil drainer with wheel-mounted 115-litre tank and side bowl, equipped like Art. 42091

No. 2 packing

m 3 0,270

kg 33

Art. 42091 Waste oil drainer with wheel-mounted 90-litre tank and side bowl, equipped with: - level gauge - collection bowl with oversize funnel - antisplash screen/filter - removable tool tray No. 2 packing

m 3 0,300

Article

kg 34

No. 2 packing

m 3 0,420

kg 42

The minimum height of the drainer with side bowl allows the motor vehicle to be positioned at a height also enabling other maintenance operations.

Caution: Do not use flammable or corrosive liquids

42066

42091

42116

Tank capacity

65 l

90 l

115 l

Max. collection capacity

52 l

75 l

97 l

Bowl capacity

15 l

ø 580 mm

Max. height

1750 mm

1700 mm

1730 mm

Min. height

1340 mm

1250 mm

1280 mm

Draining pressure

0,5 bar

Diameter oversize funnel Length draining hose

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 73

73 730 OVERALL DIMENSIONS Height-adjustable side support

total operating range of bowl 780 mm

Article

42066

1340

1750

42091

1250

1700

42116

1280

1730

ø bowl 580 mm

Note: Kit for draining tank with pump (refer to page 186)

Art. 42116 (l 115) DETAILS AND ADVANTAGES

Removable oversize funnel Bowl height adjustment tube clamping ring

Antisplash screen Adjustable bowl to increase operating range

Removable tool tray

Unit with safety valve 1 bar, and universal valve 1/4” G Keep open during oil draining

Level indicator with scale in litres and gallons

Tank draining valve

Stable and handy wheel-mounted base

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

74 740

9:31

Pagina 74

OIL DRAINERS WITH TANK for trucks

Waste oil drainers with wheel-mounted 100-litre tank. Suitable for gravity draining of engine, gearbox and differential oil from all motor vehicles placed on an auto lift or pit. The tank can be emptied by suction or by manual or air pump. The bowl (17 litres) suitable for safety draining large quantities of oil from trucks, has a larger passage with direct discharge inside the tank. It is also height-adjustable and mounted on a swivel joint that facilitates positioning.

Art. 42101 (l 100)

Art. 42102 (l 100)

Art. 42101

Art. 42103

Waste oil drainer with wheel-mounted 100-litre tank emptying with suction, equipped with: - suction tube for tank emptying - level gauge - collection bowl - removable tool tray

Waste oil drainer with wheel-mounted 100-litre tank for emptying with air pump, equipped with: - air pump for tank emptying - level gauge - collection bowl - removable tool tray

No. 1 packing

m 3 0,350

kg 40

Art. 42102 Waste oil drainer with wheel-mounted 100-litre tank for emptying with manual pump, equipped with: - manual rotary pump for tank emptying - level gauge - collection bowl - removable tool tray No. 2 packing

m 3 0,370

kg 42

Caution: Do not use flammable or corrosive liquids

No. 2 packing

m 3 0,370

The minimum height and the operating range of the bowl enable oil draining even in difficult situations with limited space.

kg 46

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 75

75 750 OVERALL DIMENSIONS total operating range of bowl 698 mm ø bowl 456 mm

1040

1660

Height-adjustable side support

Note: Kit for draining tank with pump (refer to page 186)

Art. 42103 (l 100) DETAILS AND ADVANTAGES

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

76 760

9:31

Pagina 76

SUCTION POWER To understand the concept of suction power it is important to remember the difference between pressure and depression. In this way the characteristics and advantages offered by the oil drainer will be clearly understood.

Therefore, however, it is necessary to refer to the structure of the atmosphere that surrounds us and, above all, its barometric stratification and compressibility. Its lower layers, i.e. those nearest the ground, are more densely compressed than those higher up, precisely like what happens with a pile of bags of compressible material. (see Fig. 1). The atmospheric pressure decreases as the altitude increases: at sea level it is 1 atm, at 2,000 metres a.s.l. it is approx. 0.8 atm, at 10,000 metres it falls to approx. 0.3 atm (see Fig. 2). In general, pressure is obtained by compressing any type of fluid inside a given container, until reaching the required values: 1 - 3 - 10 - 100 atm without limits, apart from those of the fluid container's structure and the power of the pump used.

On the other hand, a depression or vacuum is obtained by removing all the air contained in a given recipient or tank, and the maximum value obtainable (vacuum or suction power) is independent of the pumping or suction system used. Whatever the pump used (electric pump, air pump, Venturi principle, etc.) the maximum depression (or suction power) obtained is equal to the atmospheric pressure outside the suction system. In fact, this value cannot be exceeded because, obviously, it is not possible to remove from a container more air than what is contains. Fig. 1

A T M O S P H E R E

It is important to remember that the atmospheric pressure is given by the weight of the air above us, and this value is expressed in atmospheres. At sea-level this weight is approx. 1 Kg per cm2, i.e. 1 atm.

One kg per square metre corresponds to 10 tons per square metre of area; almost the same as a one cubic metre block of lead. Man, however, does not feel this enormous weight exerted on him because the atmosphere is also present inside his organism

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 77

77 770 The air pressure at sea-level is 1 atm, at 2000 metres a.s.l. the pressure falls to approximatively 0.8 atm (see fig. 2).

Fig. 2 At 10,000 metres a.s.l. the atmospheric pressure is approx. 0.3 atm

At 2,000 metres a.s.l. the atmospheric pressure is approx. 0.8 atm

At sea-level the atmospheric pressure is approx. 1 atm

PUMP OPERATION WITH VENTURI PRINCIPLE Connect a compressed air line (7 atm) to the special connection on the suction device. Obliged to pass through a special “MULTIPLIER NOZZLE” of the Venturi unit, the air considerably increases in speed, creating “EDDIES” that can suck and “pump” all the air contained in the suction device tank, thus creating a complete vacuum.

Therefore the suction force generated by the Venturi principle is equal to that obtained with any other air-operated and/or electric pump.

For correct depressurisation, the pressure of the air passing through the Venturi system must be between 6.5 and 7 bar.

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 78

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 79

OIL DRAINERS

79 790

portable Air-operated drainers. Ideal for quick engine oil change of any motor vehicle. The old oil is sucked from the engine by means of the probes supplied. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system Suck hot oil at 70 - 80 °C.

Art. 43024 (l 24)

Art. 43016 (l 16)

Art. 43016

Article

Air-operated waste oil drainer with portable 16-litre tank, equipped with: - level gauge - Art. 45560 set of probes (refer to page 100) No. 1 packing

m 3 0,080

kg 10,5

Tank capacity Max. draining capacity Air pressure for depressurisation Depressurisation time Noise level

Art. 43024

Suction speed

Air-operated waste oil drainer with wheel-mounted 24-litre tank, equipped with: - level gauge - Art. 45560 set of probes (refer to page 100) No. 1 packing

m 3 0,090

(oils 70° - 80°C, probes 6 mm)

Total suction capacity Suction hose

43016 16 l 13 l 7 bar 1 min 75 dB

43024 24 l 20 l 7 bar 1-1,5 min 75 dB

1,5-2 l/min 1,5-2 l/min 9-10 l 2m

15-16 l 2m

kg 13,7

Vacuum gauge for checking suction power

OVERALL DIMENSIONS

845

Venturi inlet with customisable 1/4” connection

860

Air silencer

For correct depressurisation, the pressure of the air passing through the Venturi system must be between

6.5 and 7 bar 255

280

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

80 800

9:31

Pagina 80

WASTE OIL DRAINERS wheel-mounted

Air-operated drainers. Ideal for quick engine oil change of any motor vehicle. Suitable for sucking more than 8 litres from trucks, tractors and heavy vehicles. The old oil is sucked from the engine by means of the probes supplied. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C.

Art. 43090 (l 90)

Art. 43060 (l 65) Art. 43060

Art. 43114

Air-operated waste oil drainer with wheel-mounted 65-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100)

Air-operated waste oil drainer with wheel-mounted 115-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 2 packing

m 3 0,230

kg 26,9

No. 2 packing

m 3 0,420

kg 39

Art. 43090 Air-operated waste oil drainer with wheel-mounted 90-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 2 packing

m 3 0,250

kg 31,4

Article

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

43060

43090

43114

Tank capacity

65 l

90 l

115 l

Max. draining capacity

52 l

75 l

97 l

Depressurisation time

2 min

2,5-3 min

3-3,5 min

Suction speed (oils 70° - 80°C, probes 6 mm)

1,5-2 l/min

Total suction capacity

43-45 l

60-65 l

85-90 l

Suction hose

Draining hose

Max. pressure for draining

0,5 bar

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 81

81 810

OVERALL DIMENSIONS

Article

43060

860

600

43090

1000

640

43114

1020

660

Note: Kit for draining tank with pump (refer to page 186)

Art. 43114 (l 115) DETAILS AND ADVANTAGES Vacuum gauge for checking suction power Venturi inlet with customisable 1/4” connection Air silencer

2 m suction hose with probe connection

Removable probe container

Removable tool tray

Level indicator with scale in litres and gallons

Unit with safety valve 1 bar, and universal valve 1/4” G Tank draining valve

Stable and handy wheel-mounted base

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

82 820

9:31

Pagina 82

WASTE OIL DRAINERS with prechamber

Air-operated drainers with transparent prechamber. Ideal for quick engine oil change of any motor vehicle. The 8-litre prechamber can be used for quick and independent draining. Its transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C.

Art. 43091 (l 90)

Art. 43065 (l 65) Art. 43065

Art. 43115

Air-operated oil drainer with transparent prechamber and wheel-mounted 65-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100)

Air-operated oil drainer with transparent prechamber and wheel-mounted 115-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 2 packing

m 3 0,230

kg 32,9

No. 2 packing

m 3 0,420

kg 43

Art. 43091 Air-operated oil drainer with transparent prechamber and wheel-mounted 90-litre tank, equipped with: - level gauge - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 2 packing

m 3 0,250

kg 36

Article Tank capacity Max. draining capacity Prechamber capacity Depressurisation time Suction speed (oils 70° - 80°C, probes 6 mm) Total suction capacity Suction hose Draining hose Max. pressure for draining

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

43065 65 l 52 l 8l 2 min 1,5-2 l/min 43-45 l 2m 2m 0,5 bar

43091 90 l 75 l 8l 2,5-3 min 1,5-2 l/min 60-65 l 2m 2m 0,5 bar

43115 115 l 97 l 8l 3-3,5 min 1,5-2 l/min 85-90 l 2m 2m 0,5 bar

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 83

83 830

OVERALL DIMENSIONS

Article

43065

1280

600

43091

1400

640

43115

1420

660

Note: Kit for draining tank with pump (refer to page 186)

Art. 43115 (l 115) DETAILS AND ADVANTAGES To depressurise, introduce air at 6,5-7 bar through the Venturi unit. Vacuum gauge for checking suction power Prechamber/tank connection and oil draining valve

2 m suction hose with probe connection

Transparent prechamber with level indicator Level indicator with scale in litres and gallons Removable probe container

Stable and handy wheel-mounted base Removable tool tray

Unit with safety valve 1 bar and universal valve 1/4” G

Tank draining valve

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

84 840

9:31

Pagina 84

COMBINATION OIL DRAINERS standard

Air-operated combination suction-drainers. Ideal for quick engine oil change of any motor vehicle. The old oil is drained by gravity, through the bowl (15 litres) mounted on the side support and height adjustable, and by suction with the probes supplied. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C.

Art. 44060 (l 65)

Art. 44090 (l 90)

Art. 44060

Art. 44115

Combination air-operated oil suction-drainer with wheel-mounted 65-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

Combination air-operated oil suction-drainer with wheel-mounted 115-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 3 packing

m 3 0,330

No. 3 packing

kg 34,6

m 3 0,460

kg 46

Art. 44090 Combination air-operated oil suction-drainer with wheel-mounted 90-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 3 packing

m 3 0,360

kg 38,2

Article

Caution Do not suck brake fluids, fuels, flammable or corrosive liquids

44060

44090

44115

Tank capacity

65 l

90 l

115 l

Max. draining capacity

52 l

75 l

97 l

Depressurisation time

2 min

2,5-3 min

3-3,5 min

1,5-2 l/min

Suction speed (oils 70° - 80°C, probes 6 mm) Total suction capacity

43-45 l

60-65 l

85-90 l

Suction hose

Draining hose

0,5 bar

Max. pressure for draining

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:31

Pagina 85

85 850 OVERALL DIMENSIONS

total operating range of bowl 780 mm

Height-adjustable side support

ø bowl 580 mm

Article

44060

1340

1750

44090

1380

1880

44115

1400

1900

Note: Kit for draining tank with pump (refer to page 186)

Art. 44115 (l 115) DETAILS AND ADVANTAGES

Removable oversize funnel Practical for sucking more than 8 litres from trucks, tractors and heavy vehicles

Antisplash screen Adjustable bowl to increase operating range

Removable tool tray Level indicator with scale in litres and gallons Unit with safety valve 1 bar, and universal valve 1/4” G Keep open during Oil draining

Tank draining valve

Removable probe container

Stable and handy wheel-mounted base

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

86 860

9:33

Pagina 86

COMBINATION OIL DRAINERS with prechamber

Air-operated combination suction-drainers with transparent prechamber. Ideal for quick engine oil change of any motor vehicle. The old oil is drained by gravity, through the bowl (15 litres), and by suction with the probes supplied. The prechamber (8-litre capacity) can be used for rapid and independent suction. Its transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurisation the drainer works without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C

Art. 44065 (l 65)

Art. 44091 (l 90)

Art. 44065

Art. 44116

Combination air-operated oil suction-drainer with transparent prechamber and wheel-mounted 65-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

Combination air-operated oil suction-drainer with transparent prechamber and wheel-mounted 115-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 3 packing

m 3 0,330

kg 38,2

No. 3 packing

m 3 0,460

kg 50

Art. 44091 Combination air-operated oil suction-drainer with transparent prechamber and wheel-mounted 90-litre tank, equipped with: - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 3 packing

m 3 0,360

kg 42,1

Article

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

44065

44091

44116

Tank capacity

65 l

90 l

115 l

Max. draining capacity

52 l

75 l

97 l

Prechamber capacity

Depressurisation time

2 min

2,5-3 min

3-3,5 min

1,5-2 l/min

43-45 l

60-65 l

85-90 l

Suction hose

Draining hose

0,5 bar

Suction speed (oils 70° - 80°C, probes 6 mm) Total suction capacity

Max. pressure for draining

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:33

Pagina 87

87 870 OVERALL DIMENSIONS

Height-adjustable side support

total operating range of bowl 780 mm

ø bowl 580 mm

Article

44065

1530

1750

44091

1660

1880

44116

1680

1900

Note: Kit for draining tank with pump (refer to page 186

Art. 44116 (l 115) DETAILS AND ADVANTAGES To depressurise, introduce air at 6,5-7 bar through the Venturi unit.

Removable oversize funnel

Vacuum gauge for checking suction power

Antisplash screen

Prechamber/tank connection and oil draining cock

Adjustable bowl to increase operating range

Transparent prechamber with level indicator

Removable probe container

2 m suction hose with probe connection

Removable tool tray Unit with safety valve 1 bar, and universal valve 1/4” G Keep open during Oil draining

Level indicator with scale in litres and gallons

Tank draining valve

Stable and handy wheel-mounted base

2 m hose for draining tank with air

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

88 880

9:33

Pagina 88

COMBINATION OIL DRAINERS with prechamber

Air-operated combination suction-drainers with transparent prechamber and wheel-mounted tank equipped with air inlet pressure regulator and quick-release connector for draining collected oil. The old oil is drained by gravity, through the bowl (15 litres), and by suction with the probes supplied. The prechamber (8-litre capacity) can be used for rapid and independent suction. Its transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurisation the drainer works without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C.

Art. 44092 (l 90) Art. 44093 (l 90)

Art. 44066 (l 65) Art. 44067 (l 65) Art. 44066

Art. 44067

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 65-litre tank, equipped with: - quick-release connector for draining tank - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 65-litre tank, equipped with: - quick-release connector for draining tank - air inlet pressure regulator - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 3 packing

m 3 0,330

kg 38,2

No. 3 packing

m 3 0,330

kg 39

Art. 44092

Art. 44093

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 90-litre tank, equipped with: - quick-release connector for draining tank - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 90-litre tank, equipped with: - quick-release connector for draining tank - air inlet pressure regulator - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 3 packing

m 3 0,360

kg 42,1

No. 3 packing

m 3 0,360

kg 43

Art. 44117

Art. 44118

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 115-litre tank, equipped with: - quick-release connector for draining tank - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

Combination air-operated suction-drainer with transparent prechamber and wheel-mounted 115-litre tank, equipped with: - quick-release connector for draining tank - air inlet pressure regulator - level gauge - side collection bowl - removable tool tray - Art. 45560 set of probes (refer to page 100)

No. 3 packing

m 3 0,460

kg 50

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

No. 3 packing

m 3 0,460

kg 51

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:33

Pagina 89

89 890 OVERALL DIMENSIONS Height-adjustable side support

total operating range of bowl 780 mm

ø bowl 580 mm

Article

44066 - 44067 1530 1750 44092 - 44093 1660 1880 44117 - 44118 1680 1900

Art. 44117 (l 115) Art. 44118 (l 115)

Note: Kit for draining tank with pump (refer to page 186

Quick-release connector for draining collected oil

Pressure regulator with pressure gauge for adjusting compressed air inlet pressure

Article

44066 - 44067

44092 - 44093

44117 - 44118

Tank capacity

65 l

90 l

115 l

Max. draining capacity

52 l

75 l

97 l

Prechamber capacity

2 min

2,5-3 min

3-3,5 min

1,5-2 l/min

43-45 l

60-65 l

85-90 l

0,5 bar

Suction speed (oils 70° - 80°C, probes 6 mm) Total suction capacity Suction hose Max. pressure for draining

CATALOGO LIST 217 pag 65-96 GB ok

90 900

23-06-2006

9:33

Pagina 90

PANTOGRAPH OIL SUCTION-DRAINERS for moto and auto

Air-operated combination suction-drainer with pantograph collection bowl and wheel-mounted 65-litre tank. The old oil is drained by gravity with floor tray (14 litres) or raised for vehicles placed on an auto lift or pit. The suction-drainer also drains the old oil by suction with the probes supplied. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system Suck hot oil at 70 - 80 °C.

Art. 46065 (l 65)

Art. 46064 (l 65) Art. 46064 Universal waste oil drainer with 65-litre tank, equipped with: - level gauge - 14-litre collection bowl on cantilever arms - removable tool tray - not equipped with suction unit or probes No. 3 packing

m 3 0,247

kg 38,2

Art. 46065 Air-operated universal oil suction-drainer with 65-litre tank, equipped with: - level gauge - 14-litre collection bowl on cantilever arms - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 4 packing

m 3 0,310

kg 42,7

OVERALL DIMENSIONS

1009

360

550

Note: refer to page 93 for technical specifications Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

570

140

1410

480 2007

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:33

Pagina 91

PANTOGRAPH OIL SUCTION-DRAINERS

91 910

for motor vehicles Air-operated combination suction-drainer with pantograph collection bowl and wheel-mounted 115-litre tank. The old oil is drained by gravity with floor tray (14 litres) or raised for vehicles placed on an auto lift or pit. The suction-drainer also drains the old oil by suction with the probes supplied. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system Suck hot oil at 70 - 80 °C.

Art. 46115 (l 115) Art. 46114 (l 115) Art. 46114 Universal waste oil drainer with 115-litre tank, equipped with: - level gauge - 14-litre collection bowl on cantilever arms - removable tool tray - not equipped with suction unit or probes No. 3 packing

m 3 0,360

kg 49,5

Art. 46115 Air-operated universal oil suction-drainer with 115-litre tank, equipped with: - level gauge - 14-litre collection bowl on cantilever arms - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 4 packing

m 3 0,420

kg 50,8

OVERALL DIMENSIONS Tank with antisplash filter

1500

360

550

590

650

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

140

1770

2400

CATALOGO LIST 217 pag 65-96 GB ok

92 920

23-06-2006

9:33

Pagina 92

PANTOGRAPH OIL SUCTION-DRAINERS with prechamber

Air-operated combination suction-drainer with pantograph collection bowl, transparent prechamber and wheel-mounted 115-litre tank. The old oil is drained by gravity with floor tray (14 litres) or raised for vehicles placed on an auto lift or pit, or by suction with the probes supplied. The prechamber (8-litre capacity) can be used for rapid and independent suction. Its transparency allows the quantity and quality of the sucked oil to be checked immediately. After depressurisation the drainer works independently without requiring continuous connection to the compressed air system Suck hot oil at 70 - 80 °C.

Art. 46116 (l 115) Art. 46116 Universal waste oil suction-drainer with transparent prechamber and wheel-mounted 115-litre tank, equipped with: - level gauge - 14-litre collection bowl on cantilever arms - removable tool tray - Art. 45560 set of probes (refer to page 100) No. 4 packing

m 3 0,420

kg 53,2

OVERALL DIMENSIONS Tank with antisplash filter

1500

360

550

590

650 2400

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

140

1770

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:33

Pagina 93

93 930

USE

PANTOGRAPH SUCTION-DRAINERS - TECHNICAL SPECIFICATIONS Article Tank capacity Max. draining capacity Prechamber capacity Bowl capacity Depressurising pressure Depressurisation time Noise level Suction speed (oils 70° - 80°C, probes 6mm)

Total suction capacity Suction and draining hose Max. pressure for draining

46064

46065

46114

46115

46116

46215

65 l 52 l 14 l -

65 l 52 l 14 l 7 bar 2 min 75 dB

115 l 97 l 14 l -

115 l 97 l 14 l 7 bar 3-3,5 min 75 dB

115 l 97 l 8l 14 l 7 bar 3-3,5 min 75 dB

115 l 97 l 50 l 7 bar 3-3,5 min 75 dB

1,5-2 l/min

2m 0,5 bar

43-45 l 2m 0,5 bar

2m 0,5 bar

85-90 l 2m 0,5 bar

CATALOGO LIST 217 pag 65-96 GB ok

94 940

23-06-2006

9:33

Pagina 94

PANTOGRAPH OIL SUCTION-DRAINERS for trucks

Air-operated combination suction-drainer with large pantograph collection bowl (50 litres) and wheel-mounted 115-litre tank. The old oil is drained by gravity with floor tray or raised for trucks placed on auto lifts or pit, or by suction with the probes supplied. After depressurisation the drainer works without requiring continuous connection to the compressed air system. Suck hot oil at 70 - 80 °C.

Art. 46215 (l 115) Art. 46215 Universal waste oil suction/drainer with wheel-mounted 115-litre tank, equipped with: - level gauge - large 50-litre collection bowl on cantilever arms - removable tool tray - Art. 45560 set of probes (refer to page 100) m 3 0,520

kg 68,7

2 m suction hose with probe connection

Note: Refer to page 93 for technical specifications

OVERALL DIMENSIONS

1560

The collection tank can be placed on the floor or raised under an auto lift by means of the cantilever arms

1900 660

700

600 2550

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

510

230

No. 4 packing

CATALOGO LIST 217 pag 65-96 GB ok

23-06-2006

9:33

Pagina 95

95 950

USE

Protection screen/filter splash guard and support base for filter

The air pressure for correct depressurisation is between 6,5 and 7 bar

Castors with brake

Tank with antisplash

To empty the tank with device already depressurised, open the bowl/tank connection cock and in a few seconds the oil will be sucked in the tank

Tank with 4 castors for easy positioning

CATALOGO LIST 217 pag 65-96 GB ok

96 960

23-06-2006

9:33

Pagina 96

SUCTION DRAINERS-DISPENSERS WITH PUMP wheel-mounted

Wheeled-mounted drainer-dispensers with pneumatic pump. They enable draining by means of the probes supplied, and delivery of the previously sucked liquid, for any vehicle or machine. The air pump, equipped with special VITON seals, is particularly suitable for sucking and delivering fluids such as: various oils, old oil, antifreeze liquid, diesel oil and allied products.

Art. 45180 (Kg 180 - 220)

Art. 45150 (Kg 30 - 60) Art. 45150 Drainer-dispenser, with air pump and wheel-mounted for 30 - 60 kg drums, equipped with: - 2 m suction/delivery hoses - pump with vacuum gauge - Art. 80050 trolley for 30 - 60 kg drums - Art. 45560 set of probes (refer to page 100) - Art. 45540 probe ø 12 (refer to page 100) No. 2 packing

m 3 0,080

kg 19,5

Art. 45180 Drainer-dispenser, with air pump and wheel-mounted for 180 - 220 kg drums, equipped with: - 2 m suction/delivery hoses - pump with vacuum gauge - Art. 80200 trolley for 180 - 220 kg drums - Art. 45560 set of probes (refer to page 100) - Art. 45540 probe ø 12 (refer to page 100) No. 2 packing

m 3 0,113

kg 32,1

For correct draining, the pump must operate slowly. To adjust the working speed, operate the flow regulator, “metering” the inlet air feed. Make sure the vacuum gauge indicator is always in the optimum position.

optimum position of vacuum gauge indicator

flow regulator

Caution: Do not suck any flammable or corrosive liquids

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 97

DRAINERS WITH PUMP

97 970

wall-mounted Air pump operated fixed drainers. They enable draining by means of the probes supplied. The air pump, equipped with special VITON seals, is particularly suitable for sucking and delivering fluids such as: various oils, old oil, antifreeze liquid, diesel oil and allied products. Wall-mounting enables connection to a fixed system for draining the sucked liquid directly in the storage tank.

Art. 45110 (m 10)

Art. 45111 (m 10)

Art. 45100 (m 4) Art. 45100

Art. 45111

Drainer with wall-mounted station, operated by pneumatic pump, equipped with: - pump with vacuum gauge - wall bracket - 4 m suction/delivery hoses - Art. 45560 set of probes (refer to page 100) - Art. 45540 probe ø 12 (refer to page 100)

Column drainer (Art. 39320) operated by pneumatic pump, equipped like Art. 45110

No. 1 packing

m 3 0,056

kg 12,2

Art. 45110 Drainer with wall-mounted station, operated by pneumatic pump, equipped with: - pump with vacuum gauge - wall bracket - hose reel for suction with 10 m 1/2” hose - 4 m draining hose - Art. 45560 set of probes refer to page 100) - Art. 45540 probe ø 12 (refer to page 100) No. 2 packing

m 3 0,116

No. 3 packing

m 3 0,250

kg 75

Best use of the article is obtained by connecting it to a fixed system for direct discharge of the sucked liquid in the storage tank

kg 29,1

Article

45150

45180

45100

45110

45111

Suction pump R 1:1

33070/A

Max. air pressure at pump

6 bar

Noise level

81 dB

Suitable for drums

30-60 Kg

180-220 Kg

wall mounted

Length of suction hose

1/2” X 2 m

1/2” X 4 m

1/2” X 10 m

Length of draining hose

1/2” X 2 m

1/2” X 4 m

Suction speed

1,5 - 2 l/min

(oils 70° - 80°C, probes 6 mm)

Caution: Do not suck any flammable or corrosive liquid

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

98 980

Pagina 98

DRAINER wall-mounted

Series 1/2” wall mounted drainer-dispensers with diaphragm pump. They enable draining by means of the probes supplied and delivery of the waste liquid, for any vehicle or motorcycle. The diaphragm pump, equipped with special NBR seals, is particularly suitable for sucking and delivering fluids such as: various oils, old oil, antifreeze liquid, diesel oil and allied products.

Art. 45300 (m 4) Art. 45300 Drainer-dispenser with wall-mounted station, operated by diaphragm pump Series 1/2”, equipped with: - diaphragm pump with vacuum gauge - 4 m suction/delivery hoses - Art. 33590 wall bracket - Art. 45560 set of probes (refer to page 100) - Art. 45540 probe ø 12 (refer to page 100) No. 2 packing

Best use of the article is obtained by connecting it to a fixed system for direct draining of the sucked liquid in the storage tank

m 3 0,070

kg 14

Connectors for engines with incorporated probe for faster suction of the old oil

Art. 45501 Art. 45499 Art. 45500 Art. 45502

A Art. 45498 16

Mercedes incorporated probe

JTD -FIAT engines

AUDI engines

BMW engines

Volkswagen engines

CITROEN engines

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 99

WITH DIAPHRAGM PUMP

Art. 45311 (m 10)

Art. 45310 (m 10) Art. 45310 Drainer-dispenser with wall-mounted station, operated by diaphragm pump Series 1/2”, equipped with: - diaphragm pump with vacuum gauge - hose reel for draining with 10 m 1/2” hose - 4 m draining hoses - Art. 33590 wall bracket - Art. 45560 set of probes (refer to page 100) - Art. 45540 probe ø 12 (refer to page 100) No. 3 packing

m 3 0,130

Art. 996.302

Art. 8430.401/AS

Art. 33/101260

Column drainer (Art. 39320) operated by diaphragm pump Series 1/2”, equipped like Art. 45310 m 3 0,260

Art. 39320

kg 31

Art. 45311

No. 4 packing

99 990

Art. 33590 kg 77

Art. 996.304

Art. 39320

Art. 45560

Frontal column for suction Kit, the holes allow application of one hosereel series 380-390-420-440-450 and one bracket for suction pump. No. 1 packing

m 3 0,114

kg 47

Art. 39320

Art. 45570

CATALOGO LIST 217 pag 97-134 GB ok per pdf

100 100

23-06-2006

9:58

Pagina 100

FLEXIBLE AND METAL PROBES All the drainers used for changing engine oil come with a series of standard metal and flexible probes in addition to connections for engines with incorporated probes.

STANDARD PROBE SERIES

Art. 45504 Art. 45560

Art. 45505

consisting of: - Art. 45504 flexible probe ø 5 mm - length 700 mm - Art. 45505 rigid probe ø 5 mm - length 700 mm - Art. 45506 flexible probe ø 6 mm - length 700 mm - Art. 45516 rigid probe ø 6 mm - length 700 mm - Art. 45517 flexible probe ø 7 mm - length 1000 mm - Art. 45518 flexible probe ø 8 mm - length 700 mm - Art. 45500 connection for incorporated probes Volkswagen - Art. 45501 connection for incorporated probes BMW - Art. 45502 connection for incorporated probes Citroen

Art. 45506 Art. 45516 Art. 45517 Art. 45518 Art. 45500 Art. 45501

Art. 45502

Note: The probes can be supplied separately

CONNECTORS FOR INCORPORATED PROBES Quick connector

Art. 45501 Art. 45499 Art. 45500 Art. 45502

A Art. 45498 16

- for Mercedes cars connect the quick-release connector A of the oil drainer directly to the probe incorporated in the engine. - for Audi cars: Art. 45498 Art. 45499 - for JTD Fiat Group cars: - for Volkswagen cars: Art. 45500 Art. 45501 - for BMW cars: - for Citroen cars: Art. 45502

Mercedes engines engines incorporated BMW JTD -FIAT probe engines engines engines Volkswagen AUDI CITROEN

PROBES SUPPLIED BY REQUEST Art. 45515 Art. 45526 Art. 45527 Art. 45528 Art. 45538 Art. 45539

Non-standard probes available by request. Specify for vehicles requiring a longer probe for draining the oil from the bottom of the sump.

Art. 45515 flexible probe ø 5 mm - length 1000 mm Art. 45526 flexible probe ø 6 mm - length 1500 mm Art. 45527 flexible probe ø 7 mm - length 1500 mm Art. 45528 flexible probe ø 7 mm - length 2000 mm Art. 45538 flexible probe ø 8 mm - length 1500 mm for suction in trucks

Art. 45539 flexible probe ø 8 mm - length 2000 mm Art. 45540 special flexible probe ø 12 mm - length 700 mm for quick suction. Already supplied with the following articles: Art. 45100 - 45110 - 45150 - 45180 - 45250 - 45280 - 43116 43190 - 42164 - 42215

Art. 45540

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 101

SPECIAL CONNECTIONS

101 101

Art. 45570 Wall-mounted probe kit, a handy container for the longest and less-used probes, useful for avoiding having to carry them with the drainer.

Art. 45570

Art. 45550 3/8” connection for outboard engines supplied with the drainers for boating Art. 43724 - 43760 - 43765 - 43790 (refer to page 108)

Art. 45550

Art. 45551 Art. 45551 Outboard engine draining

3/4” connection for inboard engines supplied with the drainers for boating Art. 43724 - 43760 - 43765 - 43790 (refer to page108)

Inboard engine draining

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 102

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 103

SPECIAL DRAINERS

103 103

3 SUCTION-DRAINERS FOR FUELS

AIR-OPERATED LIQUID DRAINERS

DRAINERS FOR BOATING

ANTIFREEZE SUCTION-DRAINERS

page

104

110 page 106

page

108

110 page 110

CATALOGO LIST 217 pag 97-134 GB ok per pdf

104 104

23-06-2006

9:58

Pagina 104

SUCTION DRAINER-DISPENSERS FOR FUELS fuel suction

In accordance with directive

Wheel-mounted air-operated suction systems, for the management of fuels. The air pump, equipped with special VITON seals, is suitable for sucking petrol or diesel oil from any vehicle or motorcycle by means of the probes or connections supplied. The wheel-mounted drainer with pump is easy to handle, versatile and ideal for workshops and bodyshops. The system is equipped with an earth connection for discharging electrostatic current.

Atex 94/9

Art. 45280 (Kg 180 - 220)

Art. 45250 (Kg 30 - 60) Art. 45250

Art. 45290

Drainer operated by air pump, wheel mounted for drums 30 - 60 kg, equipped with: - pump with vacuum gauge - Art. 80050 trolley for drums 30 - 60 kg - 2 m suction-delivery hoses - flexible probes ø 8 - 12 - connections for tubes ø 6 - 8 - 10

Connection for tube ø 6

No. 2 packing

m 3 0,080

kg 19,5

Art. 45291 Connection for tube ø 8

Art. 45292 Connection for tube ø 10

Art. 45280

Art. 45200

Drainer operated by air pump, wheel mounted for drums 180 - 220 kg, equipped with: - pump with vacuum gauge - Art. 80200 trolley for drums 180 - 220 Kg - 2 m suction-delivery hoses - flexible probes ø 8 - 12 - connections for tubes ø 6 - 8 - 10

Wall-mounted pump for sucking petrol equipped with: - wall bracket - flow regulator unit - earth connection

No. 2 packing

m 3 0,113

No. 1 packing

kg 32,1

optimum position of vacuum gauge indicator

flow regulator

m 3 0,015

kg 6,2

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 105

DUAL USE DRAINING PHASE

Draining occurs by means of one of the probes supplied. For fuels use the ø 12 mm flexible probe. Note: Connect to earth before use

DELIVERY PHASE OF PREVIOUSLY SUCKED LIQUID

Delivery of sucked liquids occurs by reversing the position of the tubes. Insert the suction tube in the container of previously sucked liquid. Insert the draining tube in the container (or tank) just emptied. Note: Connect to earth before use

105 105

CATALOGO LIST 217 pag 97-134 GB ok per pdf

106 106

23-06-2006

9:58

Pagina 106

AIR-OPERATED LIQUID DRAINER liquids suction

The liquid drainer guarantees quick, handy and clean draining of liquids in general (oil, brake fluid, machine tool oil, antifreeze, etc.). Indispensable for the maintenance of machine tools, lathes, presses, industrial compressors, hydraulic power packs and everything having a liquid to be drained.

Art. 43190 (l 90)

Art. 43116 (l 16) Art. 43116

Art. 43190

Portable air-operated liquid drainer with 16-litre tank, equipped with: - level gauge - Art. 45540 industrial probe ø 12

Air-operated liquid drainer with wheel-mounted 90-litre tank, equipped with: - level gauge - Art. 45540 - 45552 ndustrial probes ø 12 and ø 22

No. 1 packing

m 3 0,080

kg 10,1

Art. 45552 Metal probe ø 22 mm - length 700 mm

(also other probes are available by request, refer to page 100)

Art. 45540 Flexible probe ø 12 mm - length 700 mm

(also other probes are available by request, refer to page 100)

No. 2 packing

m 3 0,250

kg 32

Art. 43190 The grip of the quickrelease connector for probes has a filter that blocks the passage of any small solid residuals sucked with the liquid. The filter is easy to remove for checking and cleaning

Article

43116

43190

Tank capacity Max. draining capacity Depressurising time

16 l 13 l 1 min 7 bar 75 dB 9-10 l 2m -

90 l 75 l 2,5-3 min 7 bar 75 dB 60-65 l 2,5 m 2m

Depressurisation pressure Noise level Total suction capacity Suction hose Draining hose Caution: Do not use with flammable or corrosive liquids

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 107

107 107

EXAMPLES OF USE

Draining small quantities of residual liquid during an engine overhaul

Draining of old oil during servicing of a lawn mover

Draining for changing the oil of a small compressor for routine maintenance

Draining of various oils during the repair of a water pump with internal combustion engine

Draining for changing the oil of a compressor for routine maintenance

Draining of liquids during the maintenance of an industrial compressor

Draining the oil from a hydraulic press for change or maintenance

Draining oil in a machine tool control station

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

108 108

9:58

Pagina 108

DRAINERS FOR BOATING waste oil drainer

Waste oil drainers ideal for changing the engine oil in boats. Draining occurs by means of a 4-metre suction hose and connections for inboard engines (Art. 45551) and outboard engines (Art. 45550).

Art. 43724 (l 24)

Art. 43760 (l 65)

Art. 43724

Art. 43765

Waste oil drainer with wheel-mounted 24-litre tank, equipped with: - 4 m suction hose - special connections

Waste oil drainer with transparent prechamber and wheel-mounted 65-litre tank, equipped with: - 4 m suction hose - special connections

No. 1 packing

m 3 0,090

kg 13,7

No. 2 packing

m 3 0,230

kg 33,9

Art. 43760

Art. 43790

Waste oil drainer with wheel-mounted 65-litre tank, equipped with: - 4 m suction hose - special connections

Waste oil drainer with wheel-mounted 90-litre tank, equipped with: - 4 m suction hose - special connections

No. 2 packing

m 3 0,230

No. 2 packing

kg 27,9

Article Tank capacity Max. draining capacity Bowl capacity Depressurisation time Suction speed (oils 70° - 80°C, probes 6 mm) Total suction capacity Suction hose Draining hose Max. pressure for draining

m 3 0,250

kg 32,4

43724

43760

43765

43790

24 l 20 l 1-1,5 min 1,5-2 l/min 15-16 l 4m manual

65 l 52 l 2min 1,5-2 l/min 43-45 l 4m 2m 0,5 bar

65 l 52 l 8l 2 min 1,5-2 l/min 43-45 l 4m 2m 0,5 bar

90 l 75 l 2,5-3 min 1,5-2 l/min 60-65 l 4m 2m 0,5 bar

Caution: Do not suck brake fluids, fuels, flammable or corrosive liquids

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 109

109 109

Art. 43765 (l 65) Suction phase with connection Art. 45550 on an outboard engine

Art. 43790 (l 90) Suction phase with connection Art. 45551 on an inboard engine with incorporated probe

CATALOGO LIST 217 pag 97-134 GB ok per pdf

110 110

23-06-2006

9:58

Pagina 110

SUCTION-DRAINERS FOR ANTIFREEZE

drainers for antifreeze

by gravity

Gravity drainers and suction-drainers for antifreeze. Practical, functional and extremely easy to handle. Ideal for draining antifreeze from all motor vehicles placed on an auto lift, floor or pit. The tanks and bowl are equipped with an antisplash screen, useful as a drip tray.

Art. 42170 (l 50)

Art. 42160 (l 65)

Art. 42170

Art. 42164

Antifreeze drainer with 50-litre floor tank.

Antifreeze suction-drainer with 65-litre tank and pantograph collection tray (14 litres) for cars and motorcycles, equipped with: - level gauge - Art. 45540 probe holder with probe ø 12

No. 1 packing

m 3 0,136

kg 18,8

No. 4 packing

m 3 0,310

kg 42,70

Art. 42160

Art. 42215

Antifreeze drainer with wheel-mounted 65-litre tank, equipped with: - level gauge - collection bowl with oversize funnel

Antifreeze suction-drainer with 115-litre tank and large pantograph collection tray (50 litres), equipped with: - level gauge - Art 45540 probe holder with probe ø 12

No. 2 packing

m 3 0,270

kg 33

Article

No. 4 packing

m 3 0,520

kg 68,70

42170

42160

42164

42215

Tank capacity

65 l

115 l

Max. draining capacity

50 l

52 l

97 l

Bowl capacity

50 l

15 l

14 l

50 l

Depressurisation time

2 min

Suction speed (oils 70° - 80°C, probes 6 mm)

1,5-2 l/min

Total suction capacity

43 - 45 l

43-45 l

88-90 l

Suction hose

Draining hose

incorporated

0,5 bar

Max. pressure for draining

Suction: Do not suck brake fluids, fuels, flammable or corrosive liquids

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 111

111 111 gravity and suction

Art. 42164 (l 65)

Art. 42215 (l 115)

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 112

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 113

MANUAL PUMPS FOR OIL AND GREASE

MANUAL OIL PUMPS

113 113

page

114 4

MANUAL OIL DISPENSERS

page

116

AIR-OPERATED OIL DISPENSERS

page

120

MANUAL GREASE PUMPS

page

122

CATALOGO LIST 217 pag 97-134 GB ok per pdf

114 114

23-06-2006

9:58

Pagina 114

MANUAL PUMPS FOR OIL AND SIMILAR single-acting

VITON Seals

Manual pump for oil and allied products. Single-acting and VITON seals. The telescopic suction tube enables direct application on containers of different capacities. Suitable for delivering low-viscosity oil.

Art. 31201 (Kg 50 - 220)

Art. 31200 (Kg 50 - 220) Art. 31200

Article

Single-acting manual pump for drums 50 - 220 Kg with 2 m flexible delivery hose No. 1 packing

m 3 0,016

kg 4,2

31200

31201

Suitable for drums

50-220 Kg

Length delivery hose

Length suction tube

0,7-1,04 m

240 g

SAE 130

Art. 31201

Quantity deliverable with

Single-acting manual pump for drums 50 - 220 kg with rigid curved terminal

complete cycle of lever

No. 1 packing

m 3 0,016

kg 4,0

Single-action (fig. 1) occurs when the pumping piston delivers the fluid only in the pumping lever downstroke

Fig. 1

Down

Double-action (fig. 2) occurs when the pumping piston delivers the fluid in its upstroke and downstroke. Double-action delivers the fluid with a continuous and constant flow

Max. density oil deliverable

Fig. 2 Up

Down

Caution: Do not use flammable or corrosive liquids

Art. 32712 Digital litre-counter kit with partial and cumulative reading, complete with connection unions. Application between the pump and delivery hose allows the quantity of oil delivered to be controlled

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 115

115 115

MANUAL PUMPS FOR OIL AND SIMILAR double-acting

VITON Seals

Manual pump for oil and allied products. Double-acting and NBR seals. The telescopic suction tube enables direct application on containers of different capacities. Suitable for delivering low/high-viscosity oil.

Art. 30050 (Kg 30 - 60)

Art. 30200 (Kg 50 - 220) Art. 30200

Article

30050

30200

Double-acting manual pump for drums 50 - 220 Kg complete with fixing ring for drum application.

Suitable for drums

30-60 Kg

50-220 Kg

Length delivery hose

Length suction tube

0,7-1,04 m

220 g

SAE 240

No. 1 packing

m 3 0,016

kg 4,4

Art. 30050

Quantity deliverable with

Double-acting manual pump for drums 30 - 60 Kg equipped with: - Art. 80050 trolley

complete cycle of lever

No. 2 packing

m 3 0,040

Max. density oil deliverable

kg 13,6

LEVER HOOKING VARIATION TABLE

Hooking

Pumping Compression Delivery capacity with ratio complete cycle shaft stroke

Oil viscosity

No. 3

127 mm

1 : 2,2

220 g

SAE W 80/90

No. 2

100 mm

1 : 3,6

170 g

SAE W 85/140

No. 1

60 mm

1 : 6,9

100 g

SAE 240

Note: The position of lever pivot can be varied (3 hookings) to adapt the pumping force to the viscosity of the oil used. Caution: Do not use flammable or corrosive liquids

CATALOGO LIST 217 pag 97-134 GB ok per pdf

116 116

23-06-2006

9:58

Pagina 116

MANUAL OIL DISPENSERS

double-acting pump Manual oil dispensers with double-acting pump suitable for high-viscosity oil. The manual oil dispensers are ideal for filling or topping-up engine, gearbox, differential, hydraulic power pack, reduction unit oil, etc.

Art. 32016 (l 16) Art. 32016 Portable manual oil dispenser with 16-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,080

kg 10,6

Art. 32024 Manual oil dispenser with wheel-mounted 24-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 1 packing

m 3 0,090

kg 13,7

Art. 32065 Manual oil dispenser with wheel-mounted 65-litre tank, equipped with: - level gauge - Art. 24891 antisplash funnel No. 2 packing

m 3 0,185

kg 24

Art. 24891 Antisplash funnel. With antisplash rim to prevent the liquid from spilling out when filling the tank.

Art. 32024 (l 24)

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:58

Pagina 117

117 117

OVERALL DIMENSIONS

Art. 32065 (l 65)

Art. 24891

Article

32016

845

255

32024

880

280

32065

880

600

Possibility of applying the digital litre-counter Kit

Art. 32712

The manual double-acting pumps are equipped with a lever with variable pivot according to the viscosity of the oil to be delivered.

Note: double-action occurs when the pumping piston delivers fluid during the upstroke and downstroke

Down

Article

32016

32024

32065

Tank capacity

16 l portable 2m 220 g SAE 240

24 l wheel mounted 2m 220 g SAE 240

65 l wheel mounted 2m 220 g SAE 240

Structure Length delivery tube Quantity deliverable with complete cycle of lever Max. density oil deliverable

CATALOGO LIST 217 pag 97-134 GB ok per pdf

118 118

23-06-2006

9:58

Pagina 118

MANUAL OIL DISPENSERS Removal drip bowl

Wheel-mounted oil dispensers with double-acting pump suitable for high-viscosity oil and removable drip bowl. Ideal for filling or topping-up tanks for engine, gearbox, differential, hydraulic power pack, reduction unit oil, etc. The removable drip bowl, on height-adjustable side support, enables the recovery of any oil spillage during the filling phases in particular in gearboxes and differentials.

Art. 32067 (l 65)

Art. 30051 (Kg 30 - 60) Art. 30051

Art. 32067

Manual double-acting pump, for 30 - 60 Kg containers, equipped with: - Art. 80050 trolley - removal drip bowl

Manual oil dispenser with wheel-mounted 65-litre tank, equipped with: - level gauge - tool tray - removal drip bowl - Art. 24891 antisplash funnel

No. 2 packing

m 3 0,108

kg 20,6

No. 2 packing

m 3 0,232

kg 31

Art. 32068 Manual oil dispenser with wheel-mounted 65-litre tank, equipped with: - level gauge - Art. 32712 digital litre-counter (refer to page. 117) - tool tray - removal drip bowl - Art. 24891 antisplash funnel No. 2 packing

m 3 0,232

kg 32

Article Tank capacity Structure Length delivery tube Quantity deliverable with complete cycle of lever Max. density oil deliverable

Caution: Do not use flammable or corrosive liquids

30051

32067

32068

30-60 Kg drums wheel-mounted 2m 220 g SAE 240

65 l wheel-mounted 2m 220 g SAE 240

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 119

119 119

OVERALL DIMENSIONS

Art. 32068 (l 65)

Removable drip bowl for easy emptying and cleaning. Height-adjustable, it turns on support unit for easy positioning.

USE

Article

30051

1010

1700

32067

1160

1620

32068

1160

1620

CATALOGO LIST 217 pag 97-134 GB ok per pdf

120 120

23-06-2006

9:59

Pagina 120

AIR-OPERATED OIL DISPENSERS air operated

Air-operated oil dispensers suitable for high-viscosity oil. Filled with oil to 4/5 their capacity and pressurised to 6 - 8 bar, they work independently without requiring connection to the compressed air system. The air-operated oil dispensers are ideal for filling or topping-up engine, gearbox, differential, hydraulic power pack, reduction unit oil, etc.

Art. 32712

Art. 24891

Art. 33024 (l 24)

Art. 33016 (l 16) Art. 33016

EXAMPLES OF USE

Portable air-operated oil dispenser with 16-litre tank, equipped with: - level gauge - delivery gun with flexible terminal - Art. 24891 antisplash funnel No. 1 packing

m 3 0,080

kg 9,9

Art. 33024 Air-operated oil dispenser with wheel-mounted 24-litre tank equipped with: - level gauge - delivery gun with flexible terminal - Art. 24891 antisplash funnel No. 1 packing

m 3 0,090

Topping-up or filling engine oil

Topping-up or filling lubrication oil

kg 13,1

Art. 32712 Digital litre-counter kit with partial and cumulative reading, complete with connection unions. Application between the pump unit and delivery hose allows the quantity of oil delivered to be controlled.

Topping-up or filling lubrication oil in gearcases

Art. 24891 Antisplash funnel. With special rim to prevent the liquid from spilling out when filling the tank.

Caution: Do not use flammable or corrosive liquids

Topping-up or filling lubrication oil in gearcases

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 121

CATALOGO LIST 217 pag 97-134 GB ok per pdf

122 122

23-06-2006

9:59

Pagina 122

13 Kg MANUAL GREASE PUMPS manual

Portable and wheel-mounted lever or pedal-operated manual grease pumps. Practical and functional, they can be used in all workplaces and enable quick, high-pressure greasing on any motor vehicle or mechanism. They are equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Art. 68113

Art. 68012 Art. 68012 Portable high-pressure 350 - 400 bar hand-operated grease pump, equipped with: - tank 13 Kg - grease follower plate - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) kg 10,4

Art. 68113 Wheel-mounted high-pressure 300 - 350 bar pedal-operated grease pump, equipped with: - tank 13 Kg - grease follower plate - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) No. 1 packing

Grease pedal

m 3 0,070

Cover

Follower plate

Vacuum created by the pump sucking grease

kg 14

OVERALL DIMENSIONS 350

Delivery hose Ball

Grease pump

Pump

Grease

840

m 3 0,070

710

No. 1 packing

The follower plate, indispensable when using particularly hard greases, is drawn towards the bottom of the drum by the vacuum created by the pump in the grease suction stage.

340

520

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 123

13 Kg AIR-OPERATED GREASE PUMPS

123 123

air operated Wheel-mounted grease pump with air pump. Practical, functional and compact, they can be used in all workplaces and enable quick, high-pressure greasing on any motor vehicle or mechanism. Equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Art. 68213

Air-operated grease pump R 50:1, wheel-mounted, equipped with: - 13 kg tank - grease follower plate - Art. 993.504 1/4” - 4 m hose - Art. 62041 air pump R 50:1 - Art. 66892 nipple 1/4” x 3/8” - M/M - Art. 66888 grease gun with flexible terminal No. 1 packing

m 3 0,100

kg 16,7

Art. 66892

Carrying handle with hose hook

Art. 62041 Art. 993.504

13 kg tank

Follower plate

Art. 66888

OVERALL DIMENSIONS

840

Art. 68213

300

CATALOGO LIST 217 pag 97-134 GB ok per pdf

124 124

23-06-2006

9:59

Pagina 124

MANUAL GREASE PUMPS portable for drums 12 - 30 kg

Portable lever-operated manual grease pumps. Practical and functional, they can be used in all workplaces, and in particular on rough ground such as in farming or building sites. They enable easy change of the grease container (drum or bucket) and quick greasing on any motor vehicle or mechanism. They are equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Art. 60311

Art. 60280 Art. 60310

Art. 60280 Portable high-pressure 350 - 400 bar, hand-operated grease pump for drums of 12 - 20 kg with external ø from 240 mm to 260 mm, equipped with: - manual pump - drum cover ø 280 mm - grease follower plate ø 265 mm - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) No. 1 packing

m 3 0,022

ø from 240 to 260 mm ø from 255 to 300 mm ø from 270 to 330 mm

1/4” hose

Pump

Drum cover

kg 5,4

Art. 60310 Portable high-pressure 350 - 400 bar, hand-operated grease pump for drums of 16 - 30 kg with external ø from 255 mm to 300 mm, equipped with: - manual pump - drum cover ø 310 mm - grease follower plate ø 310 mm - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739)

Art. 66739

Follower plate

OVERALL DIMENSIONS 350

No. 1 packing

m 3 0,022

kg 6,5

Portable high-pressure 350 - 400 bar, hand-operated grease pump for drums of 16 - 30 kg with external ø from 270 mm to 330 mm, equipped with: - manual pump - drum cover ø 337 mm - grease follower plate ø 310 mm - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) No. 1 packing

m 3 0,036

kg 7,2

630

Art. 60311

280 310 - 337

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 125

125 125

MANUAL GREASE PUMPS trolley-mounted for drums 12 - 30 kg

Portable trolley-mounted lever-operated manual grease pumps. Practical and functional, they can be used in all workplaces, and in particular on rough ground such as in farming or building sites. They enable easy change of the grease container (drum or bucket) and quick greasing on any motor vehicle or mechanism. They are equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Art. 61311

ø from 240 to 260 mm ø from 255 to 300 mm ø from 270 to 330 mm

Art. 61280 Art. 61310 Art. 61280 Portable wheel-mounted high-pressure 350 - 400 bar, hand-operated grease pump for drums of 12 - 20 Kg with external ø from 240 mm to 260 mm, equipped with: - Art. 80035 trolley - manual pump - drum cover ø 280 mm - grease follower plate ø 265 mm - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) No. 2 packing

m 3 0,032

1/4” hose

Pump

Drum cover Art. 66739

kg 10,4

Art. 61310 Portable wheel-mounted high-pressure 350 - 400 bar, hand-operated grease pump for drums of 16 - 30 Kg with external ø from 255 mm to 300 mm, equipped with: - Art. 80035 trolley - manual pump - drum cover ø 310 mm - grease follower plate ø 310 mm - 1/4” - 2,5 m hose - rigid terminal with 4-jaw grease head (Art. 66739) No. 2 packing

m 3 0,032

Art. 80035

Follower plate

OVERALL DIMENSIONS 350

kg 11,5

No. 2 packing

m 3 0,046

kg 12,2

630

Portable wheel-mounted high-pressure 350 - 400 bar, hand-operated grease pump for drums of 16 - 30 Kg with external ø from 270 mm to 330 mm, equipped with: - Art. 80035 trolley - manual pump - drum cover ø 337 mm - grease follower plate ø 310 mm - 1/4” - 2,5 m hose - Art. 66739 rigid terminal with 4-jaw grease head

1000

Art. 61311

500 460

680

280 310 - 337

CATALOGO LIST 217 pag 97-134 GB ok per pdf

126 126

23-06-2006

9:59

Pagina 126

HAND-OPERATED GREASE TRANSFER PUMPS portable for drums 16 - 30 kg

Portable manual lever-operated grease transfer pumps. Each cycle of the lever delivers 50 g of grease. Practical and handy, they are used for filling gearcases, casings, hand-operated grease guns. They enable easy changing of the grease container (drums or bucket) and are equipped with a grease follower plate that protects the lubricant and ensures positive priming.

Art. 60411

Art. 60410 Filling central greasing system

Transfer in drums

Art. 60410 Portable hand-operated grease transfer pump for drums of 16 - 30 kg, with external ø from 255 mm to 300 mm, equipped with: - hand-operated transfer pump - drum cover ø 310 mm - grease follower plate ø 310 mm - 1/2” - 2 m hose - dispenser with rigid terminal No. 1 packing

m 3 0,030

ø from 255 to 300 mm ø from 270 to 330 mm

1/2” hose

Pump

Drum cover

kg 6

Art. 60411 Portable hand-operated grease transfer pump for drums of 16 - 30 kg, with external ø from 270 mm to 330 mm, equipped with: - hand-operated transfer pump - drum cover ø 337 mm - grease follower plate ø 310 mm - 1/2” - 2 m hose - dispenser with rigid terminal No. 1 packing

m 3 0,040

kg 6,7

Art. 60450 Female quick connector complete with check valve - 1/4” F thread for filling central greasing system

Art. 60451 Male quick connector complete with check valve - 1/4” F thread for filling central greasing system

Dispenser

Quick connect coupling

Follower plate

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 127

127 127

HAND-OPERATED GREASE TRANSFER PUMPS trolley-mounted for drums 16 - 30 kg

Trolley-mounted manual lever-operated grease transfer pumps. Each cycle of the lever delivers 50 g of grease. Practical and handy, they are used for filling gearcases, casings, manual grease guns. They enable easy changing of the grease container (drums or bucket) and are equipped with a grease follower plate that protects the lubricant and preserves its characteristics.

Art. 61411 ø from 255 to 300 mm ø from 270 to 330 mm

Art. 61410 Filling central greasing system

Transfer in small drums

Art. 61410 Portable trolley-mounted hand-operated grease transfer pump for drums of 16 - 30 kg, with external ø from 255 mm to 300 mm, equipped with: - Art. 80035 trolley - hand-operated transfer pump - drum cover ø 310 mm - grease follower plate ø 310 mm - 1/2” - 2 m hose - dispenser with rigid terminal No. 2 packing

m 3 0,040

Pump

1/2” hose

Dispenser

Drum cover

kg 11

Art. 61411 Portable trolley-mounted hand-operated grease transfer pump for drums of 16 - 30 kg, with external ø from 270 mm to 330 mm, equipped with: - Art. 80035 trolley - hand-operated transfer pump - drum cover ø 337 mm - grease follower plate ø 310 mm - 1/2” - 2 m hose - dispenser with rigid terminal m 3 0,050

OVERALL DIMENSIONS 350

kg 11,7

1000

Art. 60450 Female quick connector complete with check valve - 1/4” F thread for filling central greasing system

780

No. 2 packing

Follower plate

Art. 80035

Art. 60451 Male quick connector complete with check valve – 1/4” F thread for filling central greasing system

500 460

680

310 337

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 128

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

9:59

Pagina 129

129 129

INFORMATION ON PUMPS-SYSTEMS

SINGLE AND DOUBLE-ACTING

page

132

DELIVERY - COMPRESSION RATIO

page

134

APPROX. DELIVERY - SUCTION DISTANCE

page

136 5

DISTRIBUTION SYSTEM

page

138

FLUID STORAGE ROOM MANAGEMENT

page

143

MONITORING

page

144

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

10:08

EXAMPLE OF SYSTEM

Pagina 130

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

10:08

Pagina 131

CATALOGO LIST 217 pag 97-134 GB ok per pdf

132 132

23-06-2006

10:27

Pagina 132

SINGLE AND DOUBLE-ACTING PUMP PRINCIPLE OF SINGLE-ACTING PUMP

PUMPING PISTON UPSTROKE

PUMPING PISTON DOWNSTROKE

Delivery

Suction

In a single-acting pump, the pumped product comes out during one of the two piston strokes making up a pumping cycle

PRINCIPLE OF DOUBLE-ACTING PUMP PUMPING PISTON UPSTROKE

PUMPING PISTON DOWNSTROKE

Delivery

Suction

In a double-acting pump, the pumping piston delivers the fluid in both alternating movements (upstroke and downstroke) A double-acting pump delivers the fluid in an even and constant way.

The mechanisms for obtaining a double-acting pump are numerous.

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

10:27

Pagina 133

ADVANTAGES OF DOUBLE-ACTION

133 133

There are many technical solutions for obtaining a reciprocating double-acting pump. The double-action of RAASM pumps is obtained with solutions that have simplified the pump mechanism itself, ensuring that delivery of the fluid in both alternating movements (upstroke and downstroke) of the pump occurs only through the difference in volume between the diameters of the pumping piston (A) and the pump shaft (B). On the upstroke, delivery is caused by the pumping piston (A). On the downstroke it is caused by the difference in volume between the diameter of the motor shaft (B) and the diameter of the pumping piston (A).

DOWNSTROKE

UPSTROKE

Silencer

Air distributor

Silencer

Air distributor

Compressed air

Recycle tube Motor piston Motor piston

Liquid outlet

Motor shaft - (B) Upper chamber

Pumping piston valve

Upper chamber

Pumping piston - (A) Pumping piston - (A)

Lower chamber Lower chamber Foot valve

In addition to guaranteeing regular delivery of the fluid, this solution offers the further advantage of having fewer parts inside the pump. This means less wear plus greater and longer reliability.

CATALOGO LIST 217 pag 97-134 GB ok per pdf

23-06-2006

134 134

10:27

Pagina 134

COMPRESSION RATIO

Compression ratio (R), is understood as the direct ratio existing between the pressure of compressed air feeding the pump and the pressure at which the fluid comes out. Inside the pump this compression ratio is obtained by the difference in diameter between the air motor piston A and the liquid pumping piston B.

R 1:1

motor piston (A)

Liquid outlet 1 bar

Transfer (oil pump Art. 33094)

air piston ø 60

feed at 1 bar

pumping piston ø 60

oil outlet pressure 1 bar

Air inlet 1 bar

pumping piston (B)

R 3:1

motor piston (A)

Liquid outlet 3 bar

Dispensing at short distances (oil pump Art. 35194) air piston ø 60

feed at 1 bar

pumping piston ø 38

oil outlet pressure 3 bar

Air inlet 1 bar

pumping piston (B)

R 5:1

motor piston (A)

Liquid outlet 5 bar

Air inlet 1 bar

Delivery of high viscosity liquids at long distances (oil pump Art. 36094) air piston ø 60

feed at 1 bar

pumping piston ø 28,5

oil outlet pressure 5 bar

pumping piston (B)

It can be noted that the greater the difference between the pumping piston and the air motor piston, the greater the pressure of liquid delivered, but the lower the quantity (capacity). For example, in the grease pump with ratio 50:1, the diameter of the motor piston is 60 mm and the diameter of the pumping piston is 8.5 mm, the pressure of the grease coming out is 50 times higher than the pressure of the air feeding it.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 135

CAPACITY

135 135

The capacity of a reciprocating pump indicates the quantity of fluid it delivers. The capacity of a pump is read in two ways: - relative capacity - real capacity The “relative” capacity or “approximate” capacity was obtained by laboratory testing under the following conditions: - pump operated at 6 bar - using SAE 30 motor oil - at room temperature (16-18°C) - with free outlet, i.e. without any connection, delivery hose or gun connected to the pump.

The ”real” capacity, i.e. the “real delivery quantity” in certain applications and combinations, varies according to: - type of compression ratio (refer to page 134) - single or double-acting pump (refer to page 132) - viscosity and temperature of the fluid; - pressure of air feeding the pump; - transfer with one delivery hose only; - delivery hose and gun for dispensing near the drum;

1 bar

- centralised systems with one or more delivery points; - size of dispensing tube; - height and length of system in suction and delivery; - type of connections and accessories for completing the system.

PUMPS WITH RATIO 1:1 have low head (power) but high capacity (air piston diameter equal to suction piston diameter), and are excellent for transferring low/medium-viscosity fluids and for short distances .

1 bar

PUMPS WITH RATIO 3:1 have medium head (power) and medium capacity, and are excellent for delivering medium/high-viscosity fluids and for short distances (wheel-mounted kit). 1 bar 3 bar

1 bar

PUMPS WITH RATIO 5:1 have high head (power) and medium capacity, and are excellent for delivering and dispensing medium/high-viscosity fluids and for short distances (wheelmounted kit with or without hose reel) and with fixed systems for centralised dispensing

5 bar

When choosing a pump, however, the relative capacity (approximate capacity) is taken into consideration, as indicated on page 137.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 136

SUCTION DISTANCE

136 136

The suction capacity of a pump is a technical concept that must take into account various parameters, including: - atmospheric pressure - specific weight of the liquid - viscosity of the liquid - evaporation of the liquid - size of suction tube, etc All these factors affect the suction capacity of a pump, because they all depend on precise physical laws which cannot be avoided. Therefore a pump must be installed as close as possible to the suction point; in fact, if a certain distance is exceeded, the efficiency and functionality of the pump are seriously affected.

In order to render this concept clearer, image how hard it would be to drink your cool drink, just served, with the glass on the floor and you on the table.

pump position

For the correct installation of a pump that ensures “RELAXED” and lasting operation, just follow the simple indications given below: vertical suction distance max. 6 metres

foot valve at suction point

Approximate suction distances when installing a pump Firstly, when installing a pump, it is essential to apply a foot valve at the point of suction. The vertical distance between the pump and the foot valve must not be more than 6 metres. The horizontal distance between the pump and the foot valve must not be more than 20 metres. The vertical and horizontal distances must be taken into consideration when installing a pump, these must also be proportionally reduced.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 137

APPROXIMATE CAPACITIES ON SYSTEM

137 137

The “relative” or “approximate” capacity was obtained by means of laboratory testing under the following conditions: - for pumps ratio 5:1 and 3:1 = pump with air feed at 6 bar; temperature 15° C with SAE 30 oil - for pumps ratio 50:1 and 65:1 = pump with air feed at 6 bar; temperature 15° C with NLGl - 1 grease

relative capacity l/min

PUMP RATIO 5:1

20 18 16 14 12 10 8 6 4 2 0

hose 1/2” hose 3/4” hose 1”

100

length in metres

relative capacity l/min

PUMP RATIO 3:1

18 16 14 12 10 8 6 4 2 0

hose 1/2” hose 3/4” hose 1”

length in metres GREASE PUMP

1600

ratio 50:1 ratio 65:1

relative capacity g/min

1400 1200 1000 800 600 400 200 0 0

15 length in metres

100

CATALOGO LIST 217 pag 135-170 GB ok

138 138

23-06-2006

12:08

Pagina 138

INDICATIONS FOR SYSTEM

Medium and large-size system for dispensing oils and allied products.

This system includes storage and dispensing systems for several fluids such as various types of oil, grease, antifreeze and old oil. Each fluid has one or more delivery points located at different distances from the storage point. For the purpose of correct and effective planning it is essential to consider each distribution line as a separate system.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 139

DISTRIBUTION SYSTEMS

139 139

To correctly design a distribution line or system, and for efficient operation, it is essential to know the following data: - type of fluid to be delivered, its density and temperature (a temperature decrease determines an increase in density) - distance between the pump and delivery point - the number of delivery points and quantity/minute of fluid to be delivered for each pump - horizontal distance between the pump and the delivery points connected to it - vertical distance between the pump and the delivery points connected to it - vertical and horizontal distance of the pump from the fluid suction point (a precise physical law applies)

With this fundamental data it is possible to correctly determine the most suitable RAASM articles and accessories for the type of application required. Example: - type of pump (with tank, drum or wall-mounted) - delivery system (from hose reel, oil bar, etc.) - type of delivery guns (with or without litre-counters) - accessories and unions for completing the system

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 140

DISTRIBUTION SYSTEMS

140 140

According to European Standards, high-pressure fluid distribution systems must not exceed 400 bar. The tubes, in steel or rubber, used for preparing the grease distribution lines must be specific for high pressures (600 bar), and must be smooth and seamless, with connections having an inside diameter greater than the inside diameter of the tube to be connected. No constrictions must be created.

Characteristics of tubes for system lines Tube for main grease line - distance 0 - 200 metres: 1/2” (Ø 15 mm) Grease pendant tube: 3/8” (Ø 10 mm)

The tubes, in steel or rubber, used for preparing the oil, antifreeze, etc., distribution lines must be specific for high pressures (60 bar), and must be smooth and seamless, with connections having an inside diameter greater than the inside diameter of the tube to be connected. No constrictions must be created.

Characteristics of tubes for system lines Tubes for main motor oil line - distance 0 - 15 metres: 3/4” - distance 16 - 50 metres: 1” - distance 51 - 100 metres: 1.1/4” - distance 101 - 200 metres: 1”.1/2

(Ø 19 mm) (Ø 25 mm) (Ø 30 mm) (Ø 38 mm)

Oil pendant tube:

(Ø 19 mm)

3/4”

Tubes for main gear oil line (Ø 25 mm) 1” - distance 0/15 metres: - distance 16/50 metres: 1.1/2” (Ø 38 mm) - distance 51/250 metres: 2” (Ø 50 mm)

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 141

DISTRIBUTION SYSTEMS

141 141

Constrictions

System tube System tube Constrictions

When preparing a system , in addition to the correct choice of tubing, it is also important to install functional subsidiary elements to ensure better efficiency of the system: - cocks (ball valves) at the start of each line, at every branch and delivery point (e.g. before the connection to the hose reel) - bleeding system to be applied at the highest part of the line - condensate discharge or filter at the start of the compressed air feeding the pump The unions, branches, bends and anything that can create constrictions must be chosen carefully so as not to compromise the efficiency of the system.

CATALOGO LIST 217 pag 135-170 GB ok

142 142

23-06-2006

12:08

Pagina 142

EXAMPLES OF DISTRIBUTION SYSTEMS

System with pump inserted inside the tank. A modular extension has been applied to the pump in order to adapt the suction tube to the height of the tank.

System with wall-mounted pump and movable suction tube. This system facilitates changing the empty tank and enables the distance between the pump and the liquid to be delivered as required.

System with wall-mounted pump and flexible suction tube connected directly to the tank discharge cock. In this case it is advisable to apply a foot valve to the tank cock.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 143

EXAMPLE OF STORAGE ROOM MANAGEMENT

143 143

Fluid storage can be managed in an effective and safe way by means of specific electropneumatic accessories that signal the level of tanks and stop the pumps when the fluid is finished. The operator can have a general view of the levels of all the tanks in the storage room at any time and can stop the pumps with a single operation (for more details refer to page 230). 1 2 3 4 5 6 7 8

220/24V power supply Solenoid valve with air discharge Flashing light Timer Main stop pushbutton Levels and alarms control Automatic-manual selector Solenoid valve

3 4 7

Note: pipe bleeding must be done before start using the distribution system to clean pipe inner surface from dirty or solid remnants, in order to prevent malfunction ofmeter oil pistols and accessories. For pneumatic pump first use, to allow a fast priming of the pump and to fill the pipe of the distribution system, we suggest: - gradually open compressed air feeding - let air go out from pump outlet to help oil suction from barrel or tank.

CATALOGO LIST 217 pag 135-170 GB ok

144 144

23-06-2006

12:08

Pagina 144

MONITORING

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 145

MONITORING

145 145

COMPUTERIZED FLUID MANAGEMENT SYSTEM The computerized management system can be used by small garages and large service centres, as well as in industry in general, when different types of oil and antifreeze, stored in centralised tanks in a single place, must be delivered by several dispensers located in various places in the workshop. THE JMCO MODULE MANAGES FROM 1 TO 4 DELIVERY POINTS: 1 Management of up to 4 delivery points. 2 Delivery only by authorised personnel (up to 99 user codes). 3 Deliveries with preselection of up to 99.9 litres (memory capacity up to 2000 deliveries). 4 Loading and unloading of tanks, with capacity to manage up to 4 tanks. 5 Management and detailed printout of deliveries, loading/unloading movements and levels of tanks

THE MCO MODULE MANAGES FROM 1 TO 384 DELIVERY POINTS: 1 Management of up to 12 Delivery points for each MCO module. 2 Up to 32 modules can be connected in network and connected to a PC for controlling up to 384 dispensers. 3 Delivery only by authorised personnel (up to 900 user codes). 4 Deliveries with preselection of up to 99.9 litres. 5 Management and control of loading/unloading of an unlimited number of types of fluid tanks. 6 Security in the management and printing of, referring to loading/unloading movements, tank levels and details of deliveries, with possibility of filtering the data by period, operator or product.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 146

JMCO MANAGES UP TO 4 DELIVERY POINTS

146 146

Art. 39100

(*)

JMCO MODULE

JMCO is a system for managing the delivery of oil and other fluids from one or more centralised tanks. It uses a Control Unit through which it is possible to manage up to 4 delivery points with 4 different products. Equipped with LCD (display) and membrane keyboard, it guides the operator in the data input phases and displays the quantities delivered. It enables delivery in preselection and manages the quantities in the tanks. The unit is equipped with a printer for issuing tickets at the end of delivery and for detailed and summary printouts for management of deliveries.

Art. 39221

(*)

GPV = PULSER/BIVALVE UNIT

The GPV in double valve (high precision) version is installed along the feed lines from the pumps that supply oil to the individual distribution centres. It combines the functions of a shut-off valve with those of a litre-counter.

Art. 39220

GPVS = PULSER/MONOVALVE UNIT

The GPVS in single valve version is available as an alternative to the GPV in double valve version. 5

Art. 39230

(*)

LD = REMOTE DISPLAY (Optional)

The remote display is used to display the quantities delivered, even at considerable distances.

(*) Articles not produced by Raasm 5

JMCO wiring diagram

HOSE REEL

OIL

HOSE REEL

PRINTER

HOSE REEL

PRINTER

HOSE REEL

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 147

MCO MANAGES UP TO 384 DELIVERY POINTS

147 147

3 4

Art. 39202

MCO MODULE WITH PU AND TICKET ISSUER

(*)

The MCO module is installed near the delivery point. It allows operators to carry out dispensing and dialogue with the system via a special keyboard. The ticket issuer is housed in the lower part. PU = POWER UNIT The power unit serves to guarantee low voltage power to all components of the system. All electrical connections of the system depend on it. The PU directly controls up to 4 dispensers.

Art. 39200

MCO MODULE WITH PU WITHOUT TICKET ISSUER

Art. 39210

EPU - EXPANSION UNIT

(*)

The expansion unit is the component which, integrated with the module, enables the control of 4 supplementary dispensers (Max. 2 EPU's per MCO module). 4

Art. 39221

GPV = PULSER/BIVALVE UNIT

(*)

Art. 39220

GPVS = PULSER/MONOVALVE UNIT

The GPVS in single valve version is available as an alternative to the GPV in double valve version. 5

Art. 39230

LD = REMOTE DISPLAY (Optional)

(*)

The remote display is used to display the quantities delivered, even at considerable distances.

Art. 39240

PC KIT = PERSONAL COMPUTER KIT

The PC Kit enables management of the system to be centralised on the PC. It consists of a converter RSC 232/485 (art. 39120) for connecting the MCO Module to the PC and a CD-ROM containing the software to be installed. The software is designed to manage all the operations necessary for controlling delivery, such as system configuration and enabling operators.

(*) Articles not produced by Raasm

(*)

CATALOGO LIST 217 pag 135-170 GB ok

148 148

23-06-2006

12:08

Pagina 148

LEVEL INDICATOR

OCIO is an innovative and reliable system for remote monitoring of the liquid level in the tanks (up to 12), displaying the data on the screen of your PC. The system consists of a tube with terminal for measuring the static pressure inside each tank and a control unit for displaying the liquid level and managing the equipment by means of software with which it is possible to: - configure the type and dimensions of the tank - define the level alarms - define the level indication - calibrate the instrument According to the settings made, the control unit activates or deactivates the alarm devices or the feed of the equipment connected.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 149

LEVEL INDICATOR (*)

149 149

Art. 39260 Control unit for managing the system with display of liquid level in the tank. According to the alarm levels set, the OCIO control unit acts as a switch for activating alarm devices or shutting off the feed to the equipment connected.

Art. 39261 Control unit with direct connection to PC for remote management of liquid in the tank. According to the alarm levels set on the computer, the OCIO control unit acts as a switch for activating alarm devices or shutting off the feed to the equipment connected.

Art. 39260 Art. 39261 (*)

Art. 39264 Tube with terminal, accessory for Art. 39260 or Art. 39261, for measuring the quantity of liquid (viscosity > 30 cst). The tube must be immersed in the liquid and touch the bottom of the tank.

Art. 39264 (*)

Art. 39265 Interface and software for connection to 1 “OCIO” level indicator Art. 39261

Art. 39265 (*)

Art. 39266 Interface and software for connection to 4 “OCIO” level indicators Art. 39261

Art. 39267 Interface and software for connection to 8 “OCIO” level indicators Art. 39261

Art. 39266 Art. 39267 Art. 39268 (*) Articles not produced by Raasm

Art. 39268 Interface and software for connection to 12 “OCIO” level indicators Art. 39261

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 150

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 151

PUMPS FOR TRANSFER AND DISTRIBUTION

CHOOSING A PUMP

151 151

110 page 152

PUMPS FOR DISTRIBUTION OILS AND ALLIED PRODUCTS

page

154

TROLLEY-MOUNTED - FIXED - MODULAR KITS

page

172

WALL-MOUNTED OIL BAR AND WITH DRUM

page

198 6

GUNS AND ACCESSORIES

page

204

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 152

CHOOSING THE RIGHT PUMP

152 152

RAASM offers a very wide range of air-operated pumps suitable for many needs.

When choosing a pump, it is important to take into consideration the following basic elements: - type of fluid and its viscosity, - relative capacity to be delivered - distance between pump and point of use - pressure of fluid for type of use.

The following table will help you choose the right pump for your needs. For other needs refer to page 290

Series Compression ratio Capacity

1/2” - 1” 1:1 60-160 l/min

500 1:1 35 l/min

600 1:1 23 l/min

650 1:1 40 l/min

600 1:1 30 l/min

Low viscosity fluids: various low viscosity oils (SAE 15/20), hydraulic fluid, gas oil and allied products, etc.

for distances < 15 m

Medium viscosity fluids: motor oil, gearbox oil (SAE 15/140), etc.

for distances < 15 m

High viscosity fluids: motor oil, gearbox oil (SAE 240), etc.

Medium and high viscosity greases

for distances < 15 m

for distances < 50 m

for distances 50 - 100 m

page 156

page 160

page 162

page 164

page 158

Antifreeze

Windshield fluid

For other technical data see the pages indicated Note: The measurements in the table are approximate

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 153

FOR YOUR NEEDS

900 2:1 95 l/min

500 3:1 20 l/min

600 3:1 14 l/min

650 5:1 18 l/min

900 5:1 45 l/min

900 7:1 30 l/min

153 153

600 700 1200 50:1 65:1 40:1 1500 g/min 1900 g/min 10000 g/min

for distances for distances 50 - 100 m 50 - 100 m

for distances for distances for distances for distances 50 - 100 m 100 - 200 m 100 - 200 m > 200 m

for distances for distances 50 - 100 m 15 - 50 m

for distances for distances for distances for distances > 200 m 50 - 100 m 100 - 200 m 100 - 200 m

for distances 50 - 100 m

for distances < 15 m

for distances for distances for distances 50 - 100 m 50 - 100 m 50 - 100 m

for distances for distances 50 - 100 m 100 - 200 m

for distances for distances for distances 50 - 100 m > 100 m > 100 m

page 314

page 161

page 166

page 168

page 170

page 171

page 238

page 239

page 312

CATALOGO LIST 217 pag 135-170 GB ok

154 154

23-06-2006

12:08

Pagina 154

DIAPHRAGM PUMPS IN ALUMINIUM

RAASM air-operated diaphragm pumps are ideal for a wide range of uses and are arranged for numerous applications.

FLUIDS RAASM diaphragm pumps are compatible with a wide variety of fluids: - water, - muds; - mineral and vegetable oils, - abrasive fluids or fluids with suspended solids, etc,.

FLEXIBILITY AND MODULARITY RAASM diaphragm pumps are designed according to a modular concept in order to reduce the number of components. This means: - different combinations for adapting the pump to specific applications - fast and economical scheduled maintenance operations - easy management of spare parts

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 155

OPERATION

155 155

The air-operated diaphragm pumps are oscillating transfer pumps with 2 opposed pumping chambers. Each chamber is divided into 2 hermetic parts, one for the air and one for the fluid. The 2 membranes are united by a metal shaft that makes them carry out an alternating motion. The introduction of air into one part of the chamber creates suction of the fluid in the opposed part of the other chamber and vice versa.

COMPLETE CYCLE SEQUENCE

Air feed Liquid in suction Liquid in delivery

PHASE 1

The slide valve of the air distribution system sends air (blue) to the left chamber which, pushing the membrane outwards, compresses the previously sucked liquid (green). Through the effect of the pressure created, the valve 1 closes and the valve 2 opens, allowing the liquid to come out (green). The right membrane, obliged to carry out the same movement by the shaft joining it to the left membrane, creates a vacuum. Through the effect of the vacuum, the valve 3 opens and the valve 4 closes, enabling suction of the liquid (red).

PHASE 2 The slide valve of the air distribution system sends air (blue) to the right chamber which, pushing the membrane outwards, compresses the previously sucked liquid (green). Through the effect of the pressure created, the valve 3 closes and the valve 4 opens, allowing the liquid to come out (green). The left membrane, obliged to carry out the same movement by the shaft joining it to the right membrane, creates a vacuum. Through the effect of the vacuum, the valve 1 opens and the valve 2 closes, enabling suction of the liquid (red).

APPROXIMATE DISTANCES FOR CORRECT INSTALLATION OF A MEMBRANE PUMP Suction Delivery (depends on the following variables):

- vertically, not more than 6 metres - horizontally, not more than 20 metres - viscosity and temperature of fluid - suspended solids - length/diameter of delivery hose and its constrictions - vertically, not more than 70 metres - horizontally, not more than 200 metres

PUMP FOR DRUMS The diaphragm pumps can be fitted directly on a drum, tank or other container. For easy use of the pump, equipped with suction tube, it is fixed to the container by means of its adapter.

SELF-PRIMING PUMP The diaphragm pumps are self-priming. Depending on the model, it is possible to obtain self-priming up to 6 metres vertically and 20 metres horizontally.

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 156

DIAPHRAGM PUMPS Series 1/2”

156 156

Membrane NBR

Ratio 1:1 Capacity 60 l/min

The transfer diaphragm pumps in die-cast aluminium, with high-quality components, ensure lasting and reliable operation even in extreme conditions.

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

8 (116) 6 (87) 4 (58)

190

285

380 0,50

0,38 0,27

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 0 30 60 l/min 45 15 (gpm) (3,96) (7,93) (11,89) (15,85)

KIND OF FLUID: Cold water - 15 °C SAE30 oil (ISO VG 100) - 20 °C

33/101260

Article Pump material

33500

Aluminium

Membrane material

NBR High Nitrile

Ball valve material

Hytrel

Compatible fluids

Water, mineral-vegetable oils, diesel oil

Compression ratio

1:1

Air inlet connection

F1/4” G

F3/4” x F3/4” G

suction tube ø 34 mm - F3/4” G

2-6 bar

Fluid inlet-outlet connection Air working pressure Air max. pressure

8 bar

Average air consumption

400 l/min

Relative flowrate (free outlet at 8 bar)

60 l/min

Noise level

75 dB

Deliverable oil temperature

-10+50°C

Max. solids diameter

ø 1,5 mm

for drums (180-220 Kg)

Suitable for drums or tanks with drum

for drum

No. 1 packing m 3 0,020

No. 2 packing m 3 0,040

kg 7,0

kg 10

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:08

Pagina 157

DIAPHRAGM PUMPS

Series 1”

Membrane NBR

Ratio 1:1 Capacity 160 l/min

The transfer diaphragm pumps in die-cast aluminium, with high-quality components, ensure lasting and reliable operation even in extreme conditions. Ideal for transferring fluids even in the presence of suspended solids.

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

8 (116) 6 (87)

150

225

300 1,38

B B

1,04

4 (58)

0,69 C

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 0 83 l/min 124 165 42 (gpm) (11,10) (21,91) (32,74) (43,56)

KIND OF FLUID: Cold water - 15 °C SAE30 oil (ISO VG 100) - 20 °C

Article Pump material

33/101160 Aluminium

Membrane material

NBR High Nitrile

Ball valve material

Hytrel

Compatible fluids

Water, mineral-vegetable oils, diesel oil

Compression ratio

1:1

Air inlet connection

F1/2” G

Fluid inlet-outlet connection Air working pressure Air max. pressure

F1.1/4” x F1.1/4” G 2-6 bar 8 bar

Average air consumption

1200 l/min

Relative flowrate (free outlet at 8 bar)

160 l/min

Noise level

75 dB

Deliverable oil temperature

-10+50°C

Max. solids diameter

ø 2 mm

No. 1 packing m 3 0,032 kg 16

157 157

CATALOGO LIST 217 pag 135-170 GB ok

28-06-2006

16:44

Pagina 158

WINDSHIELD FLUIDS PUMP Series 600 S/Steel

158 158

Ratio 1:1 Capacity 30 l/min

VITON Seals

Stainless steel AISI 304 air-operated pumps for short/medium distance transfer. Ideal for transferring low/mediumviscosity fluids such as: antifreeze liquid, windshield washing liquid and chemical products.

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

8 (116) 6 (87)

200

100

300

400

A A B B

4 (58)

0 l/min (gpm)

0,65 0,51 0,36

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 7,5 (2,1)

15 (4,1)

22,5 (6,2)

30 (8,3)

KIND OF FLUID: windshield fluid with water

33360

Article

33396

Compatible fluids

Suitable for antifreeze and windshield liquids

Compression ratio

1:1

Air inlet connection

F1/4” G

Oil outlet connection

F1/2” G

Air working pressure

6-8 bar

Air max. pressure

8 bar

Average air consumption

370 l/min

Relative flowrate (free outlet at 8 bar)

30 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

50 SAE

Bung adaptor Art. 33434

standard

Suction tube length

940 mm

Suction tube diameter

34 mm

modular

for drums (180-220 Kg)

Suitable for drums or tanks

modular

with drum

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,3

kg 7,4

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 159

MODULAR KIT FOR S/STEEL PUMPS

159 159

Modular wall-mounted kit for transfer with stainless steel pump. Ideal for transferring low/mediumviscosity fluids such as: antifreeze liquid, window washing liquid and chemical products. Wall-mounting, with connection to a fixed system, enables liquids to be transferred from the place of storage to the service station.

Art. 33440 Art. 33300 (R 1:1 - 30 l/min) Art. 33300 Modular kit with stainless-steel pump, comprising: - Art. 33360 pump 30 l/min. - Art. 33115 wall bracket - Art. 33426 flexible suction tube - Art. 33427 rigid suction tube - Art. 33434 bung adaptor No. 1 packing

m 3 0,029

Art. 33115

Art. 33360

kg 11,4

Art. 33440 Gun for antifreeze and windshield liquid applicable to Kit (Art. 33300) equipped with: - inlet joint 1/2”F - rigid terminal with free outlet (refer to page 223)

Art. 33427

Art. 33434

Art. 33426

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 160

PUMPS FOR OIL AND SIMILAR Series 500

160 160

Ratio 1:1 Capacity 35 l/min

VITON Seals

Air-operated pumps for short and medium-distance transfer. Ideal for transferring low/mediumviscosity fluids such as: oils, lubricants and allied products. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 204), enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

8 (116) 6 (87) 4 (58)

180

120

0,44 A

0,34

B C

0 l/min (gpm)

240

9,0 (2,4)

18 (4,8)

27 (7,2)

0,25

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 36 (9,5)

KIND OF FLUID: SAE15 oil (ISO VG 100) - 20 °C

26090

Article Compatible fluids

26091

26094

Oils, lubricants and similar

Type of seals

VITON

Suction tube upper body

aluminium

Suction tube

carbon steel

Compression ratio

1:1

Air inlet connection

F1/4” G

Fluid outlet connection

F3/4” G

Air working pressure

6-8 bar

Air max. pressure

8 bar

Relative flowrate (free outlet at 8 bar)

35 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

130 SAE

940 mm

Suction tube length Suction tube diameter

50 mm

Suitable for drums or tanks

modular

customisable 1”

with drum (180-220Kg)

modular

customisable 1”

with drum

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,5

kg 6

kg 7,2

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 161

Series 500

PUMPS FOR OIL AND SIMILAR Ratio 3:1 Capacity 20 l/min

161 161

VITON Seals

Air-operated pumps for short/medium distance distribution. Ideal for transferring low/mediumviscosity fluids such as: oils, lubricants and allied products. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 204), enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

24 (348) 18 (261) 12 (174)

160

240

0,65 A

0,51

B C

0 l/min (gpm)

320

5,0 (1,3)

10 (2,7)

15 (4,0)

0,36

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 20 (5,3)

KIND OF FLUID: SAE15 oil (ISO VG 100) - 20 °C

35060

Article Compatible fluids

35061

35094

Oils, lubricants and similar

Type of seals

VITON

Suction tube upper body

aluminium

Suction tube

carbon steel

Compression ratio

3:1

Air inlet connection

F1/4” G

Fluid outlet connection

F1/2” G

Air working pressure

6-8 bar

Air max. pressure

8 bar

Relative flowrate (free outlet at 8 bar)

20 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

130 SAE

Suction tube length

940 mm

Suction tube diameter

32 mm

Suitable for drums or tanks

modular

customisable 1”

with drum

customisable 1” with drum (180-220Kg)

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,3

kg 5,8

kg 6,5

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 162

PUMPS FOR OIL AND SIMILAR

162 162 Ratio 1:1 Capacity 23 l/min

NBR seals

Series 600 air-operated pumps for short/medium distance transfer. Ideal for transferring low-viscosity fluids such as: oil, old oil, antifreeze and allied products. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 204), enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

8 (116) 6 (87) 4 (58)

0 l/min (gpm)

187

125

250

A A B C

6 (1,6)

12 (3,2)

18 (4,8)

0,41

0,32

0,23

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 24 (6,4)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

33080

Article Compatible fluids

33082 33083

33081 Suitable for oil and similar

Compression ratio

1:1

Air inlet connection

F1/4”G

Oil outlet connection

F1/2”G

Air working pressure

6-8 bar

Air max. pressure

8 bar

Average air consumption

230 l/min

Relative flowrate (free outlet at 8 bar)

23 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

80 SAE

Bung adaptor Art. 38042

standard

standard on 33083

Suction tube length

940 mm

Suction tube diameter

42 mm

modular

customisable 1”

with drum (180-200 Kg)

Suitable for drums or tanks

modular

customisable 1”

with drum

No. 1 packing m 3 0,006

No. 1 packing m 3 0,020

kg 4,3

kg 5

kg 6,3 kg 6,4

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 163

Series 600 VITON seals

33070

163 163

TEFLON seals

33071

33072 33073

Suitable for waste oil

33060

33061

33094 33096

Suitable for industrial use (refer to page 301)

1:1

F1/4”G

F1/2”G

6-8 bar

8 bar

230 l/min

23 l/min

81 dB

-10+50°C

80 SAE

standard

standard on 33073

standard

standard on 33096

940 mm

42 mm

modular

customisable 1”

with drum (180-220 Kg)

modular

customisable 1”

with drum (180-220 Kg)

No. 1 packing m 3 0,006

No. 1 packing m 3 0,020

No. 1 packing m 3 0,006

No. 1 packing m 3 0,020

kg 4,3

kg 5

kg 6,3 kg 6,4

kg 4,3

kg 5

kg 6,3 kg 6,4

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 164

PUMPS FOR OIL AND SIMILAR

164 164 Ratio 1:1 Capacity 40 l/min

VITON seals

Series 650 air-operated pumps for short/medium distance transfer. Ideal for transferring low/mediumviscosity fluids such as: oil, old oil, antifreeze and allied products. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 204),enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

8 (116) 6 (87) 4 (58)

0 l/min (gpm)

112

150 0,68

0,53

B C

0,38

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 10,5 (2,8)

21 (5,5)

31,5 (8,3)

42 (11)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

33170

Article Compatible fluids

33171

33172 33173

Suitable for waste oil

Compression ratio

1:1

Air inlet connection

F1/4” G

F1/4”G

Oil outlet connection

F3/4” G

Air working pressure

6-8 bar

Air max. pressure

1:1

8 bar

Average air consumption

370 l/min

Relative flowrate (free outlet at 8 bar)

40 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

130 SAE

Bung adaptor Art. 38042

standard

standard on 33173

Suction tube length

940 mm

Suction tube diameter

42 mm

modular

customisable 1”

with drum (180-200Kg)

Suitable for drums or tanks

modular

customisable 1”

with drum

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,3

kg 6

kg 7,3 kg 7,4

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 165

Series 650

165 165

According to needs, 1” suction tubes of different lengths can be applied to the pumps defined as customisable, to enable use with any type of container.

TEFLON Seals

To obtain a pump with customised suction tube: - thread 1” GAS the ends of a water pipe normally available on the market, of length suitable for the depth of the container - apply the threaded pipe between the pump and the foot valve (Art. 10/20)

Choosing suction tube length

Scelta della

33160

33161

33194 33196

Preparing customised suction tube

Suitable for industrial use (refer to page 301) 1:1

1:1

F1/4”G

F3/4” G

6-8 bar

8 bar

370 l/min

40 l/min

81 dB

-10+50°C

130 SAE

standard

standard on 33196

940 mm

42 mm

modular

customisable 1”

with drum (180-200Kg)

Pump application with customised suction tube pumps Art. 33061-33071-33081 33161-33171

customized suction tube No. 1 packing m 3 0,010

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,3

kg 6

kg 7,3 kg 7,4

foot valve Art. 10/20

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 166

PUMPS FOR OIL AND SIMILAR

166 166 Ratio 3:1 Capacity 14 l/min

NBR Seals

Series 600 air-operated pumps for mediumdistance oil distribution. Ideal for distributing medium/high-viscosity oil and antifreeze liquid. Suitable for movable installations and fixed systems. The wall-mounted version of these pumps, mounted on wall or in a fixed position by means of the special accessories (refer to page 204), enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

20 (290) 15 (217) 10 (145)

0 l/min (gpm)

285

190

380 A

B C

3,5 (0,9)

7 (1,8)

10,5 (2,7)

0,62 0,48 0,35

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 14 (3,7)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Articolo

35160

Compatible fluids Compression ratio

Suitable for medium/high-viscosity oil 3:1 3:1

Air inlet connection

F1/4” G

Fluid outlet connection

F1/2” G

Air working pressure

6-8 bar

Air max. pressure

35161

8 bar

Average air consumption

330 l/min

Relative flowrate (free outlet at 8 bar)

14 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

130 SAE

Bung adaptor Art. 38042

standard

Suction tube length

42 mm

modular

customisable 1”

Suction tube diameter Suitable for drums or tanks

modular

customisable 1”

with drum

No. 1 packing m 3 0,010

kg 4,4

kg 5,0

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 167

Series 600

35163

35173 35176

167 167

35194 35196

Suitable for medium/high-viscosity oil 3:1

3:1

F1/4” G

F1/4”G

F1/2” G

6-8 bar

8 bar

330 l/min

14 l/min

81 dB

-10+50°C

130 SAE

standard

standard on 35176

standard on 35196

1250 mm

740 mm

940 mm

42 mm

customisable 1”

with drum (50-60 Kg)

with drum (180-220 Kg)

No. 1 packing m 3 0,020

kg 6,8

kg 5,8

kg 6,5

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 168

PUMPS FOR OIL AND SIMILAR

168 168 Ratio 5:1 Capacity 18 l/min

NBR Seals

Series 650 air-operated double-acting pumps for medium-distance oil distribution. Ideal for also distributing high-viscosity oil. The double action guarantees the delivery of a continuous and constant flow, ideal for all installations, excellent for centralised distribution systems. The wall-mounted version of these pumps,mounted on wall or in a fixed position by means of the special accessories (refer to page 204), enables numerous uses through the application of modular extensions (refer to page 232). B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

35 (507) 26 (377) 17 (246)

0 l/min (gpm)

120

40 A

160 A

B C

4,5 (1,2)

9 (2,4)

13,5 (3,6)

0,72 0,56 0,40

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 18 (4,8)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Articolo

36060

Compatible fluids Compression ratio

Suitable for medium/high-viscosity oil 5:1 5:1

Air inlet connection

F1/4” G

Fluid outlet connection

F1/2” G

Air working pressure

6-8 bar

Air max. pressure

36061

8 bar

Average air consumption

350 l/min

Relative flowrate (free outlet at 8 bar)

18 l/min

Noise level

81 dB

Deliverable oil temperature

-10+50°C

Max. deliverable oil viscosity

240 SAE

Bung adaptor Art. 38042

standard

Suction tube length

Suction tube diameter Suitable for drums or tanks

modular

customisable 1”

with drum

42 mm

modular

customisable 1”

No. 1 packing m 3 0,010

kg 4,7

kg 5,2

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 169

Series 650

36063

36073 36076

169 169

36094 36096

Suitable for medium/high-viscosity oil 5:1

5:1

F1/4” G

F1/4”G

F1/2” G

6-8 bar

8 bar

350 l/min

18 l/min

81 dB

-10+50°C

240 SAE

standard

standard on 36076

standard on 36096

1250 mm

740 mm

940 mm

42 mm

customisable 1”

with drum (50-60 Kg)

with drum (180-220 Kg)

No. 1 packing m 3 0,020

kg 7,2

kg 6,2

kg 6,8

CATALOGO LIST 217 pag 135-170 GB ok

23-06-2006

12:09

Pagina 170

PUMPS FOR OIL AND SIMILAR Series 900

170 170

Ratio 5:1 Capacity 45 l/min

Polyurethane seals

Series 900 industrial air-operated double-acting pumps for distribution. Suitable for transferring oils, lubricants and allied products also with very high viscosity. The double action guarantees the delivery of a continuous and constant flow, ideal for all needs. Particularly effective in systems equipped with several distribution points.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

36 (522)

24 (348)

16 (232)

1,8 1,3 1,0

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 0 l/min 11,25 22,50 33,75 45,00 (gpm) (3,0) (5,9) (9,0) (11,9)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

90C/51

90F/51

oils, lubricants and allied products

polyurethane/PU

Suction tube upper body

aluminium

carbon steel

Suction tube

carbon steel

Article Compatible fluids Type of seals

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”G

Suction tube diameter

ø 62

1,6 m3/min

Noise level

80 dB

Air max. pressure

8 bar

Suitable for drums or tanks

modular

No. 1 packing m 3 0,040

kg 12

kg 13

Max. air consumption 8 bar

modular

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 171

Series 900

PUMPS FOR OIL AND SIMILAR Ratio 7:1 Capacity 30 l/min

171 171

Polyurethane seals

B 6 bar

bar (psi)

(58 psi)

cycles/min

(m3/min)

FLUID OUTLET PRESSURE

C 4 bar

(87 psi)

(116 psi)

AIR CONSUMPTION

A 8 bar

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

90C/71

Article

90F/71

91C/71

91F/71

Compatible fluids

oils, lubricants oils, lubricants oils, lubricants oils, lubricants and allied products and allied products and allied products and allied products

Type of seals

polyurethane/PU

Suction tube upper body

aluminium

carbon steel

aluminium

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”G

Suction tube diameter

ø 53

1,6 m3/min

Noise level

80 dB

Air max. pressure

8 bar

Suitable for drums or tanks

modular

No. 1 packing m 3 0,040

No. 1 packing m 3 0,070

kg 11

kg 12

kg 13

kg 14

Max. air consumption 8 bar

modular

drum

with drum (180-200Kg) with drum (180-200Kg)

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 172

OIL DISPENSER PLATFORM

172 172 for drums 180 - 220 kg with hose reel

Mobile oil dispenser platform. The ideal combination for dispensing oil in any workplace. The very easy to handle trolley is equipped with a drum (180 - 220 kg) clamping device, adjustable side support for stowing accessories, wheel with brake. The platform comes with a handy hose reel with 10 m of hose, and digital hose end meter

Art. 35200 (R 3:1 - 14 l/min) Art. 37100 (R 5:1 - 18 l/min) Art. 35200 Mobile oil dispenser platform with hose reel, for drums of 180 - 220 kg, comprising: Art. 35194 pump R 3:1 - 14 l/min - Art. 80201 heavy duty trolley - Art. 8430.401 hose reel with 10 m hose ø 1/2” - Art. 38042 bung adaptor nipple 1/2”x1/2”G M/M - Art. 38071 digital metering gun - Art. 37735 - Art. 996.302 hose 1/2” - 2 m No. 4 packing

m 3 0,210

Art. 35194 (for Art. 35200)

Art. 36094 (for Art. 37100)

Art. 37735

kg 72,2

Art. 37100 Mobile oil dispenser platform with hose reel, for drums of 180 - 220 kg, comprising: pump R 5:1 - 18 l/min Art. 36094 - Art. 80201 heavy duty trolley - Art. 8430.401 hose reel with 10 m hose ø 1/2” - Art. 38042 bung adaptor - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 digital metering gun - Art. 996.302 hose 1/2” - 2 m No. 4 packing

m 3 0,210

Art. 996.302 Art. 38071 Art. 38042 Art. 8430.401

kg 73,4

Note: By request the platform can be supplied with other hose reels (refer to page 370)

Art. 80201

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 173

OIL DISPENSER PLATFORM

173 173

for drums 180 - 220 kg

Art. 35210 (R 3:1 - 14 l/min) Art. 37150 (R 5:1 - 18 l/min) Art. 35210 Mobile oil dispenser platform for drums of 180 - 220 kg, comprising: Art. 35194 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor - Art. 80201 trolley - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m m 3 0,176

No. 3 packing

Art. 35194

Art. 37735

(for Art. 35210)

Art. 36094 (for Art. 37150)

kg 55

Art. 37150 Mobile oil dispenser platform for drums of 180 - 220 kg, comprising: Art. 36094 pump R 5:1 - 18 l/min - Art. 80201 trolley - Art. 38042 bung adaptor - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m

Art. 996.304 Art. 38071

m 3 0,176

No. 3 packing

kg 56,2

Art. 38042

OVERALL DIMENSIONS m 3 0,176

1410

N° 3 packing

950

Measurements approximate also valid for the articles on page 172-173

Art. 80201 850

920

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 174

OIL DISPENSER KIT

174 174 for drums 180 - 220 kg

Trolley-mounted oil dispenser kit. The ideal combination for dispensing oil in any workplace. The very easy to handle trolley is equipped with a drum (180 - 220 kg) clamping device and adjustable side support for stowing accessories.

Art. 35220 (R 3:1 - 14 l/min) Art. 37200 (R 5:1 - 18 l/min) Art. 35220 Mobile oil dispenser platform for drums of 180 - 220 kg, comprising: Art. 35194 pump R 3:1 - 14 l/min - Art. 80200 trolley - Art. 38042 bung adaptor - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m No. 3 packing

m 3 0,121

Art. 36094

Art. 38071

(for Art. 37200)

Art. 35194 (for Art. 35220)

Art. 37735

kg 33,3

Art. 37200 Mobile oil dispenser platform for drums of 180 - 220 kg, comprising: Art. 36094 pump R 5:1 - 18 l/min - Art. 80200 trolley - Art. 38042 bung adaptor - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m

Art. 996.304

Art. 38042 No. 3 packing

m 3 0,121

kg 34,1

830

1380

OVERALL DIMENSIONS

770

700

Art. 80200

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 175

OIL DISPENSER KIT

175 175

for drums 30 - 50 kg

Trolley-mounted oil dispenser kit. The ideal combination for dispensing oil in any workplace. The compact trolley has 2 fixed wheels and 2 castors that make it very easy to handle. It is equipped with a pump support and is suitable for holding various types of containers (30 - 50 kg).

Art. 35250 (R 3:1 - 14 l/min) Art. 37500 (R 5:1 - 18 l/min) Art. 35250 Trolley-mounted oil dispenser kit for containers of 30 - 50 kg, comprising: Art. 35173 pump R 3:1 - 14 l/min - Art. 80050 trolley - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m m 3 0,085

No. 3 packing

Art. 35173

Art. 38071

(for Art. 35250)

Art. 36073 (for Art. 37500)

Art. 37735

kg 20

Art. 37500 Trolley-mounted oil dispenser kit for containers of 30 - 50 kg, comprising: Art. 36073 pump R 5:1 - 18 l/min - Art. 80050 trolley - Art. 38071 nipple 1/2” G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2”- 4 m No. 3 packing

m 3 0,085

Art. 996.304

kg 20,5

1000

1145

OVERALL DIMENSIONS

500

460

Art. 80050

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 176

OIL DISPENSER KIT

176 176 with 65 l tank

Oil dispensers, with air-operated pump suitable for oils of any density. Practical and functional, with wheel-mounted 65-litre tank, they can be used in any workplace. Equipped with an aluminium dispensing gun, with digital litre-counter. The version with pump R 3:1 - 14 l/min. is also recommended for dispensing antifreeze liquid.

Art. 35265 (R 3:1 - 14 l/min) Art. 37650 (R 5:1 - 18 l/min) Art. 35265 Oil dispenser with wheel-mounted 65-litre tank, and level indicator, equipped with: Art. 35173 pump R 3:1 - 14 l/min - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2” - 4 m - Art. 24891 antisplash funnel No. 3 packing

m 3 0,230

Art. 35173

Art. 38071

(for Art. 35265)

Art. 36073 (for Art. 37650)

Art. 37735

kg 33

Art. 37650 Oil dispenser with wheel-mounted 65-litre tank, and level indicator, equipped with: Art. 36073 pump R 5:1 - 18 l/min - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2” - 4 m - Art. 24891 antisplash funnel kg 34

OVERALL DIMENSIONS

Art. 24891 Antisplash funnel With antisplash rim to prevent the liquid from spilling out when filling the tank.

1145

No. 3 packing

m 3 0,230

Art. 996.304

600

65 l tank

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 177

OIL DISPENSER KIT

177 177

with 65 l tank

Oil dispensers, with air-operated pump suitable for oils of any density. Practical and functional, with wheel-mounted 65-litre tank, they can be used in any workplace. Equipped with an aluminium dispensing gun. The version with pump R 3:1 - 14 l/min. is also recommended for dispensing antifreeze liquid.

Art. 35270 (R 3:1 - 14 l/min) Art. 37670 (R 5:1 - 18 l/min) Art. 35270 Oil dispenser with wheel-mounted 65-litre tank and level indicator, equipped with: Art. 35173 pump R 3:1 - 14 l/min - Art. 38071 nipple 1/2” G M/M - Art. 38022 oil gun - Art. 996.304 hose 1/2” - 4 m - Art. 24891 antisplash funnel No. 3 packing

m 3 0,230

Art. 36073

Art. 38071

(for Art. 37670)

Art. 35173 (for Art. 35270)

Art. 38022

kg 30,9

Art. 37670 Oil dispenser with wheel-mounted 65-litre tank and level indicator, equipped with: Art. 36073 pump R 5:1 - 18 l/min - Art. 38071 nipple 1/2” G M/M - Art. 38022 oil gun - Art. 996.304 hose 1/2” - 4 m - Art. 24891 antisplash funnel m 3 0,230

kg 31,3

OVERALL DIMENSIONS

Art. 24891 Antisplash funnel With antisplash rim to prevent the liquid from spilling out when filling the tank.

1145

No. 3 packing

Art. 996.304

600

65 l tank

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 178

PUMPS EQUIPPED FOR DISPENSING OIL

178 178

for drums 180 - 220 kg

Air-operated pump equipped for dispensing oil and allied products. A complete solution for fixed station equipped with hose for compressed air feeding the pump and hose with digital metering gun for delivering fluid.

Art. 35290 (R 3:1 - 20 l/min) Art. 35293 (R 3:1 - 14 l/min) Art. 35296 (R 5:1 - 18 l/min) Art. 35290 Oil dispenser pump kit, equipped with: Art. 35094 pump R 3:1 - 20 l/min - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2” - 4 m - Art. 37801 pressure regulator with pressure gauge - Art. 993.201 hose 1/4” - 1 m No. 2 packing

m 3 0,070

kg 14

Art. 35196 (for Art. 35293)

Art. 35094 (for Art. 35290)

Art. 36096 (for Art. 35296)

Art. 37801 Art. 993.201

Art. 35293 Oil dispenser pump kit, equipped with: Art. 35196 pump R 3:1 - 14 l/min - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2” - 4 m - Art. 37801 pressure regulator with pressure gauge - Art. 993.201 hose 1/4” - 1 m No. 2 packing

m 3 0,085

kg 13,5

Art. 35296 Oil dispenser pump kit, equipped with: Art. 36096 pump R 5:1 - 18 l/min - Art. 38071 nipple 1/2”x1/2”G M/M - Art. 37735 metering gun - Art. 996.304 hose 1/2” - 4 m - Art. 37801 pressure regulator with pressure gauge - Art. 993.201 hose 1/4” - 1 m No. 2 packing

m 3 0,085

kg 13,5

Art. 38071 Art. 996.304

Art. 37735

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 179

MODULAR TRANSFER KIT

179 179

for drums 180 - 220 kg with wall-mounted pump

Modular wall-mounting kit, for transfer from drums, with digital litre-counter. Ideal for transferring low/mediumviscosity fluids such as: oil, antifreeze liquid, diesel oil, etc. Supplied with digital litre-counter for controlling the quantity of liquid delivered from storage containers to other containers or service points.

Art. 33250 (R 1:1 - 40 l/min) Art. 33520 (R 1:1 - 60 l/min) Art. 33250 Modular kit, with wall application, for transfer from drums 180 - 220 kg, complete with: pump R 1:1 - 40 l/min - VITON seals Art. 33170 - Art. 33115 wall bracket - Art. 33701 digital litre-counter - Art. 38026 flexible suction tube - Art. 38027 rigid suction tube - Art. 38042 bung adaptor hose 3/4” - 5 m - Art. 997.505 - Art. 33153 dispenser gun - Art. 33117 nipple 3/4”x 3/4” M/M No. 2 packing

m 3 0,070

Art. 33170

Art. 33117

(for Art. 33250)

Art. 33/101260

Art. 33701

(for Art. 33520)

Art. 33153

kg 18,5

Art. 33590 Art. 33115

Art. 33520 Modular kit, with wall application, for transfer from drums 180 - 220 kg, complete with: Art. 33/101260 diaphragm pump in aluminium series 1/2” R 1:1 - 60 l/min - NBR seals wall bracket - Art. 33590 - Art. 33701 digital litre-counter - Art. 38026 flexible suction tube - Art. 33581 rigid suction tube - Art. 33434 bung adaptor hose 3/4” - 5 m - Art. 997.505 dispenser gun - Art. 33153 - Art. 33117 nipple 3/4”x 3/4” M/M No. 2 packing

m 3 0,085

Art. 38027 (for Art. 33250)

Art. 33581

Art. 38042 (for Art. 33250)

Art. 33434 (for Art. 33520)

kg 20,5

Art. 997.505

(for Art. 33520)

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 180

WALL-MOUNTED OIL DISPENSER KIT

180 180

for drums 180 - 220 kg with open hose reel

Oil dispensing systems with pump applied on drum or tank, equipped with series 420 swivelling open hose reel. They enable oil dispensing from an independent fixed station and with connection to a centralised system for distribution from storage zones.

Art. 35275 (R 3:1 - 14 l/min) Art. 37675 (R 5:1 - 18 l/min) Art. 35275 Wall-mounted oil dispenser kit with pump on drum 180 - 220 kg or tank, comprising: Art. 35194 pump R 3:1 - 14 l/min - Art. 8420.401 hose reel 10m hose ø 1/2” bung adaptor - Art. 38042 - Art. 38071 nipple 1/2”G M/M - Art. 996.302 hose 1/2”- 2 m - Art. 37735 metering gun - Art. 88630 drip-tray No. 4 packing

m 3 0,128

Art. 36094

Art. 8420.401

(for Art. 37675)

By request the kits can be supplied with other hose reels (page 370)

Art. 35194 (for Art. 35275)

kg 30,1

Art. 37675 Wall-mounted oil dispenser kit with pump on drum 180 - 220 kg or tank, equipped like Art. 35275 but with: Art. 36094 pump R 5:1 - 18 l/min No. 4 packing

m 3 0,128

Art. 37735

kg 31,1

2200

OVERALL DIMENSIONS

900

Art. 38042 Art. 38071 Art. 996.302

Art. 88630

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:15

Pagina 181

WALL-MOUNTED OIL DISPENSER KIT

181 181

for drums 180 - 220 kg with enclosed hose reel

Oil dispensing systems with pump applied on drum or tank, equipped with series 440 swivelling enclosed hose reel. They enable oil dispensing from an independent fixed station and with connection to a centralised system for distribution from storage zones.

Art. 35276 (R 3:1 - 14 l/min) Art. 37676 (R 5:1 - 18 l/min) Art. 35276 Wall-mounted oil dispenser kit with pump on drum 180 - 220 kg or tank, comprising: Art. 35194 pump R 3:1 - 14 l/min - Art. 8440.401 enclosed hose reel 10m hose ø 1/2” bung adaptor - Art. 38042 - Art. 38071 nipple 1/2”G M/M - Art. 996.302 hose 1/2”- 2 m - Art. 37735 metering gun - Art. 88630 drip-tray No. 4 packing

m 3 0,130

Art. 36094

Art. 8440.401

(for Art. 37676)

By request the kits can be supplied with other hose reels (page 374)

Art. 35194 (for Art. 35276)

kg 37,1

Art. 37676 Wall-mounted oil dispenser kit with pump on drum 180 - 220 kg or tank, equipped like Art. 35276 but with: pump R 5:1 - 18 l/min Art. 36094 No. 4 packing

m 3 0,130

Art. 37735

kg 38,1

2200

OVERALL DIMENSIONS

900

Art. 38042 Art. 38071 Art. 996.302

Art. 88630

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 182

WALL-MOUNTED OIL DISPENSER KIT

182 182

for drums 180 - 220 kg with pump and open hose reel

Oil dispensing systems with pump applied on wall, equipped with series 420 swivelling open hose reel. A modular solution enabling oil dispensing from an independent fixed station and with connection to a centralised system for distribution from storage zones.

Art. 35280 (R 3:1 - 14 l/min) Art. 37680 (R 5:1 - 18 l/min) Art. 35280 Wall-mounted oil dispenser kit with pump on wall, for drums 180 - 220 kg or tank, comprising: - Art. 35160 pump R 3:1 - 14 l/min - Art. 8420.401 hose reel 10m hose ø 1/2” bung adaptor - Art. 38042 - Art. 38043 wall bracket - Art. 38071 nipple 1/2” G M/M - Art. 38026 flexible suction tube 1” - Art. 38027 rigid suction tube - Art. 37735 metering gun - Art. 996.302 hose 1/2”- 2 m - Art. 88630 drip-tray m 3 0,130

No. 4 packing

Art. 36060

Art. 8420.401

(for Art. 37680)

By request the kits can be supplied with other hose reels (page 370)

Art. 35160 (for Art. 35280)

Art. 996.302

Art. 37735

kg 38,5

Art. 37680 Wall-mounted oil dispenser kit with pump on wall for drums 180 - 220 kg or tank, equipped like Art. 35280 but with: Art. 36060 pump R 5:1 - 18 l/min No. 4 packing

m 3 0,130

kg 39,5

OVERALL DIMENSIONS

Art. 38026

Art. 38027

900

1700

2200

600

Art. 38042 Art. 38043

Art. 38071

Art. 88630

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 183

WALL-MOUNTED OIL DISPENSER KIT

183 183

for drums 180 - 220 kg with pump and enclosed hose reel

Oil dispensing systems with pump applied on wall, equipped with series 440 swivelling enclosed hose reel. A modular solution enabling oil dispensing from an independent fixed station and with connection to a centralised system for distribution from storage zones.

Art. 35281 (R 3:1 - 14 l/min) Art. 37679 (R 5:1 - 18 l/min) Art. 35281 Wall-mounted oil dispenser kit with pump on wall, for drums 180 - 220 kg or tank, comprising: Art. 35160 pump R 3:1 - 14 l/min - Art. 8440.401 enclosed hose reel 10m hose ø 1/2” bung adaptor - Art. 38042 - Art. 38043 wall bracket - Art. 38071 nipple 1/2” G M/M - Art. 38026 flexible suction tube 1” - Art. 38027 rigid suction tube - Art. 37735 metering gun - Art. 996.302 hose 1/2”- 2 m - Art. 88630 drip-tray No. 4 packing

m 3 0,135

Art. 35160

Art. 8440.401

(for Art. 35281)

By request the kits can be supplied with other hose reels (page 374)

Art. 36060 (for Art. 37679)

Art. 996.302

Art. 37735

kg 45

Art. 37679 Wall-mounted oil dispenser kit equipped like Art. 35280 but with: - Art. 36060 pump R 5:1 - 18 l/min No. 4 packing

m 3 0,135

kg 45

OVERALL DIMENSIONS 600

Art. 38026

900

1700

2200

Art. 38027

Art. 38042

Art. 38043

Art. 38071 Art. 88630

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 184

MODULAR TRANSFER KIT

184 184 for drums 180 - 220 kg with wall-mounted pump

Modular wall-mounted kit for transfer from drums. Ideal for transferring low/medium-viscosity fluids such as: oil, antifreeze liquid, diesel oil, etc. Wall-mounting, with connection to a fixed system enables liquids to be transferred from the place of storage to the service station. The rigid suction tube (Art. 38027) can be lengthened by means of modular elements (refer to page 232) for adapting to the height of the tanks.

Art. 33100 (R 1:1 - 23 l/min) Art. 33200 (R 1:1 - 40 l/min) Art. 33510 (R 1:1 - 60 l/min) Art. 33100 Modular wall-mounted kit, for transfer from drums 180 - 220 kg, complete with: pump R 1:1 - 23 l/min - VITON seals - Art. 33070 - Art. 33115 wall bracket bung adaptor - Art. 38042 flexible suction tube - Art. 38026 - Art. 38027 rigid suction tube No. 1 packing

m 3 0,029

Art. 33/101260 (for Art. 33510)

Art. 33170 (for Art. 33200)

Art. 33070 (for Art. 33100)

kg 10,4

Art. 33590

Art. 33200

Art. 33115

Modular wall-mounted kit, for transfer from drums 180 - 220 kg, equipped like Art. 33100 but with Art. 33170 pump R1:1 - 40 l/m - VITON seals No. 1 packing

m 3 0,029

kg 11,4

Art. 33510 Modular wall-mounted kit, for transfer from drums 180 - 220 kg, equipped like: - Art. 33/101260 diaphragm pump series 1/2” R 1:1 - 60 l/min - NBR Hight Nitrile seals wall bracket - Art. 33590 - Art. 33434 bung adaptor - Art. 38026 flexible suction tube - Art. 33581 rigid suction tube No. 2 packing

Art. 38027 (for Art. 33100 33200)

m 3 0,040

kg 15

Art. 33581 (for Art. 33510)

Art. 38042 (for Art. 33100 - 33200)

Art. 33434 (for Art. 33510)

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 185

MODULAR TRANSFER KIT

185 185

for drums 180 - 220 kg with wall-mounted pump

Oil dispensing system with pump applied on wall. A modular solution enabling oil dispensing with connection to a centralised system, a hose reel or directly to the delivery hose. Ideal for distribution from storage zones. The rigid suction tube (Art. 38027) can be lengthened by means of modular elements (refer to page 232) for adapting to the height of the tanks.

Art. 35285 (R 3:1 - 14 l/min) Art. 37685 (R 5:1 - 18 l/min) Art. 35285 Modular wall-mounted kit, for dispensing from trade drums 180 - 220 kg or tank, comprising: Art. 35160 pump R 3:1 - 14 l/min - Art. 38043 wall bracket - Art. 38042 bung adaptor - Art. 38026 flexible suction tube - Art. 38027 rigid suction tube m 3 0,029

No. 1 packing

Art. 36060 (for Art. 37685)

Art. 35160 (for Art. 35285)

kg 11,4

Art. 37685 Modular wall-mounted kit, for dispensing from trade drums 180 - 220 kg or tank comprising: Art. 36060 pump R 5:1 - 18 l/min - Art. 38043 wall bracket - Art. 38042 bung adaptor - Art. 38026 flexible suction tube - Art. 38027 rigid suction tube No. 1 packing

m 3 0,029

kg 11,9

OVERALL DIMENSIONS

Art. 38027 The rigid suction tube can be lengthened by means of modular elements (refer to page 232) for adapting to the height of the tanks.

1500

600

Art. 38042

Art. 38026

Art. 38043

CATALOGO LIST 217 pag 171-198 GB ok

4-07-2006

11:42

Pagina 186

DRAINING KIT

186 186 for containers

and tanks Wall-mounted transfer kit. A practical solution for draining movable equipment, waste oil suction/drainers by means of connection with quick-coupling valve. Wall application enables connection to a fixed system for discharging the sucked liquid directly into the storage tank.

Art. 33125 (R 1:1 - 23 l/min) Art. 33550 (R 1:1 - 60 l/min) Art. 33119 Art. 33126 Art. 33127 Art. 33118

Art. 33125 Wall-mounted draining kit, complete with: Art. 33070 pump R 1:1 - 23 l/min - VITON seals - Art. 33115 wall bracket - Art. 38026 flexible suction tube - air inlet flow regulator No. 1 packing

m 3 0,029

Art. 33/101260 (for Art. 33550)

Art. 33070 (for Art. 33125)

kg 8,4

Art. 33550 Wall-mounted draining kit, complete with: Art. 33/101260 diaphragm pump series 1/2” R 1:1 - 60 l/min - NBR High Nitrile seals - Art. 33590 wall bracket - Art. 38026 flexible suction tube - air inlet flow regulator No. 1 packing

m 3 0,030

kg 14

Art. 33115

Suction filter Art. 33590

Art. 33118 Nipple 1/2”x 3/4” G connection M/M

Art. 38026 Art. A605

Art. 33119 Nipple 1”x 3/4” G connection M/M

Art. 33126 Female quick connector with check valve, thread 3/4” F

Art. 33127 Male quick connector with check valve, thread 3/4” F

Threaded union 1”F, to be applied the flexible tube for receiving a quick-connector for pump connection to tank to be emptied

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 187

DRAINING KIT

187 187

for containers

and tanks

Wall-mounted transfer kit. A practical solution for draining movable equipment, waste oil suction/drainers by means of connection with quick-coupling valve. Wall application enables connection to a fixed system for discharging the sucked liquid directly into the storage tank.

Art. 33124 (R 1:1 - 35 l/min) Art. 33135 (R 3:1 - 20 l/min) Art. 33119 Art. 33126 Art. 33127 Art. 33118

Art. 33124 Wall-mounted draining kit, complete with: Art. 26090 pump R 1:1 - 35 l/min - VITON seals - Art. 38052 wall bracket - Art. 38026 flexible suction tube - air inlet flow regulator No. 1 packing

m 3 0,030

kg 8,7

Art. 33119

Art. 33135 Wall-mounted draining kit, complete with: Art. 35060 pump R 3:1 - 20 l/min - VITON seals - Art. 38047 wall bracket - Art. 38026 flexible suction tube - air inlet flow regulator No. 1 packing

m 3 0,030

Art. 33127 Art. 33126 Art. 33119

kg 8,5

Art. 33119 Art. 33126 Art. 33119

Art. 33127

Art. 33126

Art. 33118

Art. 33127 Art. 33118

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 188

WALL-MOUNTED KIT FOR TRANSFER FROM TANK

188 188

with wall-mounted pump

Wall-mounted kit for transfer from tank. A practical solution for transferring high quantities of oil, waste oil, etc., from tank to other containers. The suction tube and 1” M threaded valve enable easy connection to the storage tank.

Art. 33110 (R 1:1 - 23 l/min) Art. 33210 (R 1:1 - 40 l/min) Art. 33530 (R 1:1 - 60 l/min) Art. 33110 Wall-mounted kit, for transfer from tank, complete with: Art. 33070 pump R 1:1 - 23 l/min - VITON seals wall bracket - Art. 33115 - Art. 38026 flexible suction tube - Art. 38091 check valve No. 1 packing

m 3 0,029

kg 8,6

Art. 33/101260 (for Art. 33530)

Art. 33170 (for Art. 33210)

Art. 33070 (for Art. 33110)

Art. 33210 Wall-mounted kit, for transfer from tank, complete with: Art. 33170 pump R 1:1 - 40 l/min - VITON seals wall bracket - Art. 33115 - Art. 38026 flexible suction tube - Art. 38091 check valve

Art. 33590 Art. 33115

No. 1 packing

m 3 0,029

kg 9,6

Art. 33530

Art. 38091

Wall-mounted kit, for transfer from tank, complete with: Art. 33/101260 diaphragm pump series 1/2” R 1:1 - 60 l/min - NBR High Nitrile seals - Art. 33590 wall bracket - Art. 38026 flexible suction tube check valve - Art. 38091 No. 1 packing

m 3 0,030

Check valve with 1” M connection, to be applied to flexible suction tube. Enables connection to the tank draining cock by means of a special elbow.

kg 15

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 189

WALL-MOUNTED KIT FOR DISPENSING FROM TANK

189 189

with wall-mounted pump

Wall-mounted kit for dispensing oil with pump connected to tank. Enables oil dispensing with connection to a centralised system for distribution from storage zones. The suction tube and 1” M threaded valve enable easy connection to the storage tank.

Art. 36420 (R 5:1 - 18 l/min) Art. 36430 (R 5:1 - 45 l/min) Art. 36530 (R 7:1 - 30 l/min) Art. 36420 Wall-mounted kit, for dispensing from tank, complete with: Art. 36060 pump R 5:1 - 18 l/min - Art. 38043 wall bracket - Art. 38026 flexible suction tube - Art. 38091 check valve No. 1 packing

m 3 0,029

Art. 90C/71 (for Art. 36530)

Art. 90C/51 (for Art. 36430)

Art. 36060 (for Art. 36420)

kg 9,9

Art. 36430 Wall-mounted kit, for dispensing from tank, complete with: Art. 90C/51 pump R 5:1 - 45 l/min - Art. 10/10 wall bracket - Art. 38026 flexible suction tube - Art. 38091 check valve No. 1 packing

m 3 0,050

Art. 10/10

kg 17,6

Art. 38043

Art. 36530 Wall-mounted kit, for dispensing from tank, complete with: Art. 90C/71 pump R 7:1 - 30 l/min - Art. 10/10 wall bracket - Art. 38026 flexible suction tube - Art. 38091 check valve No. 1 packing

m 3 0,050

kg 16,6

Art. 38091 Check valve with 1” M connection, to be applied to flexible suction tube. Enables connection to the tank draining cock by means of a special elbow.

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 190

WALL-MOUNTED KIT FOR DISPENSING FROM TANK

190 190

with wall-mounted pump

System for oil dispensing from tank with pump applied on wall. A modular solution for oil delivery with connection to a centralised system or hose reel or directly to the delivery hose. Ideal for distribution from storage zones. Complete with accessories for connection to the compressed air system and dispensing system.

Note: The tank is not part of the Kit

Art. 35330 (R 3:1 - 14 l/min) Art. 36330 (R 5:1 - 18 l/min) Art. 35330 Modular wall-mounted kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min - Art. 38043 wall bracket - Art. 33434 bung adaptor - Art. 38026 flexible suction tube - Art. 38055 rigid suction tube 1260 mm - Art. 993.201 tube 1/4” - 1 m - Art. 996.301 tube 1/2” - 1 m - Art. 38210 cock 1/2” - Art. 38071 nipple 1/2”x1/2” G - M/M - Art. 37812 condensate discharge regulator with lubricator No. 2 packing

m 3 0,040

Art. 36060

Art. 37812

(for Art. 36330)

Art. 993.201

Art. 35160 (for Art. 35330)

kg 15

Art. 38071 Art. 38210

Art. 36330 Modular wall-mounted kit for tank, complete with: Art. 36060 pump R 5:1 - 18 l/min - Art. 38043 wall bracket - Art. 33434 bung adaptor - Art. 38026 flexible suction tube - Art. 38055 rigid suction tube 1260 mm - Art. 993.201 tube 1/4” - 1 m - Art. 996.301 tube 1/2” - 1 m - Art. 38210 cock 1/2” - Art. 38071 nipple 1/2”x1/2” G - M/M - Art. 37812 condensate discharge regulator with lubricator No. 2 packing

m 3 0,040

Art. 996.301

Art. 38043

Art. 38055

kg 16

Art. 33434

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 191

WALL-MOUNTED KIT FOR DISPENSING FROM TANK

191 191

with wall-mounted pump

System for oil dispensing from tank, with pump applied on wall. A modular solution for oil delivery with connection to a centralised system or hose reel or directly to the delivery hose. Ideal for distribution from storage zones. Complete with accessories for connection to the compressed air system and dispensing system.

Note: The tank is not part of the Kit

Art. 36340 (R 5:1 - 45 l/min) Art. 36350 (R 7:1 - 30 l/min) Art. 36340 Modular wall-mounted kit for tank, complete with: Art. 90C/51 pump R 5:1 - 45 l/min - Art. 10/10 wall bracket - Art. 33434 bung adaptor - Art. 38026 flexible suction tube - Art. 38055 rigid suction tube 1260 mm - Art. 996.301 tube 1/2” - 1 m - Art. 998.501 tube 1” - 1 m - Art. 38211 cock 1” - Art. 33119 nipple 1” x 3/4” G - M/M - Art. 37817 condensate discharge regulator with lubricator No. 2 packing

m 3 0,120

Art. 90C/71

Art. 37817

(for Art. 36350)

Art. 90C/51 (for Art. 36340)

kg 23

Art. 996.301 Art. 33119

Art. 36350 Modular wall-mounted kit for tank, complete with: Art. 90C/71 pump R 7:1 - 30 l/min - Art. 10/10 wall bracket - Art. 33434 bung adaptor - Art. 38026 flexible suction tube - Art. 38055 rigid suction tube 1260 mm - Art. 996.301 tube 1/2” - 1 m - Art. 998.501 tube 1” - 1 m - Art. 38211 cock 1” - Art. 33119 nipple 1” x 3/4” G - M/M - Art. 37817 condensate discharge regulator with lubricator No. 2 packing

m 3 0,120

Art. 998.501

Art. 38211 Art. 10/10

Art. 38055

kg 22

Art. 33434

Art. 38026

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 192

KIT FOR DISPENSING FROM TANK

192 192 with pump connected to tank drain

System for dispensing from tank with pump applied to the drain. A complete solution for dispensing oil and allied products. The dispensing pump and hose reel are fixed directly to the tank by means of sturdy brackets. The pump connection is fixed to the tank drain.

Note: The tank is not part of the Kit

Art. 36650 (R 3:1 - 14 l/min) Art. 36660 (R 5:1 - 18 l/min) Art. 36670 (R 5:1 - 45 l/min) Art. 36675 (R 7:1 - 30 l/min) Art. 36650 Dispensing kit for oil and allied products with pump connected to the tank drain and hose reel, complete with: Art. 35160 pump R 3:1 - 14 l/min - Art. 38043 pump support bracket - Art. 8430.401 hose reel with 10 m hose ø 1/2” - Art. 38028 flexible suction hose - Art. 38091 check valve - Art. 37735 metering gun - Art. 36641 support bracket - Art. 88630 drip tray - Art. 38071 nipple 1/2” x1/2” G M/M

Art. 36060 (for Art. 36660)

Art. 35160 (for Art. 36650)

Art. 90C/51

Art. 90C/71

(for Art. 36670)

(for Art. 36675)

Art. 33119 No. 4 packing

m 3 0,260

kg 50

Art. 36660 Dispensing kit for oil and allied products, equipped like Art. 36650 but with: Art. 36060 pump R 5:1 - 18 l/min No. 4 packing

m 3 0,260

Art. 38043

kg 51

Art. 36670

Art. 38071

Dispensing kit for oil and allied products with pump connected to the tank drain and hose reel, complete with: Art. 90C/51 pump R 5:1 - 45 l/min - Art. 10/10 pump support bracket - Art. 8540.401 hose reel with 15 m hose ø 3/4” - Art. 38028 flexible suction hose - Art. 38091 check valve - Art. 37771 metering gun1/2” - Art. 36641 support bracket - Art. 88630 drip tray - Art. 33119 nipple 1” x 3/4” G - MM No. 4 packing

m 3 0,280

Art. 10/10 Art. 8430.401 (for Art. 36650)

Art. 8540.401 (for Art. 36670)

Art. 38091

kg 72

Art. 37771

Art. 36675 Dispensing kit for oil, equipped like Art. 36670 but with: Art. 90C/71 pump R 7:1 - 30 l/min No. 4 packing

Art. 38028

m 3 0,280

kg 71

(for Art. 36670)

Art. 88630

Art. 37735 (for Art. 36650)

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 193

KIT FOR DISPENSING FROM TANK

193 193

with pump connected to tank drain

Note: The tank is not part of the Kit

Art. 36651 (R 3:1 - 14 l/min) Art. 36661 (R 5:1 - 18 l/min) Art. 36651 Dispensing kit for oil and allied products with pump connected to the tank drain and hose reel, complete with: Art. 35160 pump R 3:1 - 14 l/min - Art. 38043 pump support bracket - Art. 8450.401 hose reel with 10 m hose ø 1/2” flexible suction hose - Art. 38028 check valve - Art. 38091 - Art. 37735 metering gun - Art. 36641 support bracket - Art. 88630 drip tray - Art. 38071 nipple 1/2” x1/2” G M/M No. 4 packing

m 3 0,270

Art. 35160 (for Art. 36651)

Art. 36060 (for Art. 36661)

Art. 38071 Art. 8450.401

kg 55

Art. 36661 Dispensing kit for oil equipped like Art. 36651 but with: Art. 36060 pump R 5:1 - 18 l/min No. 4 packing

m 3 0,270

Art. 38043

kg 56

Art. 36641 Tank fixing bracket for pump and hose reel No. 1 packing

m 3 0,029

kg 12

Art. 38028

Art. 36641 Bracket for 1 m width tank

Art. 88630

Art. 37735 Art. 38091

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 194

PUMP KIT PLUS ACCESSORIES FOR TANK

194 194

with central pump

suction tube 960 mm Oil dispensing system with pump applied directly to tank. A modular solution for oil delivery with connection to a centralised system or hose reel or directly to the delivery hose. Ideal for distribution from storage zones. Complete with accessories for connection to the compressed air system and dispensing system.

Note: The tank is not part of the Kit

Art. 35310 (R 3:1 - 14 l/min) Art. 35312 (R 3:1 - 14 l/min) Art. 36310 (R 5:1 - 18 l/min) Art. 36312 (R 5:1 - 18 l/min) Art. 35310 Modular kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor - Art. 10/22 extension 660 mm - Art. 10/20 suction tube valve-filter - Art. 993.202 tube1/4”- 2 m - Art. 996/302 tube 1/2” - 2 m - Art. 38210 cock 1/2” - Art. 38071 nipple 1/2” x 1/2” G - M/M - Art. 37812 condensate discharge regulator with lubricator - Art. 36602 tank support bracket No. 2 packing

m 3 0,090

Art. 36060

Art. 37812

(for Art. 36310 Art. 36312)

Art. 35160 (for Art. 35310 Art. 35312)

kg 18

Art. 35312 Modular kit for tank equipped like Art. 35310 but with Art. 38090 filter-valve air intake stop for suction tube. No. 2 packing

m 3 0,090

Art. 10/22

kg 18

Art. 996.302

Art. 36310 Modular kit for tank equipped like Art. 35310 but with: Art. 36060 pump R 5:1 - 18 l/min No. 2 packing

Art. 993.202

m 3 0,090

Art. 38210 Art. 38071 Art. 38042

Modular kit for tank equipped like Art. 36310 but with Art. 38090 ilter-valve air intake stop for suction tube. No. 2 packing

m 3 0,090

Art. 10/20 (for Art 35310 - 36310)

kg 19

Art. 36312

Art. 38090 (for Art 35312 - 36312)

kg 19

Art. 36602

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 195

PUMP KIT PLUS ACCESSORIES FOR TANK

195 195

with central pump

suction tube 1260 mm Oil dispensing system with pump applied directly to tank. A modular solution for oil delivery with connection to a centralised system or hose reel or directly to the delivery hose. Ideal for distribution from storage zones. Complete with accessories for connection to the compressed air system and dispensing system.

Note: The tank is not part of the Kit

Art. 35320 (R 3:1 - 14 l/min) Art. 35322 (R 3:1 - 14 l/min) Art. 36320 (R 5:1 - 18 l/min) Art. 36322 (R 5:1 - 18 l/min) Art. 35320 Modular kit for tank, complete with: Art. 35160 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor - Art. 10/23 extension 960 mm - Art. 10/20 suction tube valve-filter - Art. 993.202 tube1/4”- 2 m - Art. 996/302 tube 1/2” - 2 m - Art. 38210 cock 1/2” - Art. 38071 nipple 1/2” x 1/2” G - M/M - Art. 37812 condensate discharge regulator with lubricator - Art. 36602 tank support bracket No. 2 packing

m 3 0,090

Art. 36060

Art. 37812

(for Art. 36320 Art. 36322)

Art. 35160 (for Art. 35320 Art. 35322)

kg 19

Art. 35322 Modular kit for tank equipped like Art. 35320 but with Art. 38090 filter-valve air intake stop for suction tube. No. 2 packing

m 3 0,090

Art. 10/23

kg 19

Art. 996.302

Art. 36320 Modular kit for tank equipped like Art. 35320 but with: Art. 36060 pump R 5:1 - 18 l/min No. 2 packing

Art. 993.202

m 3 0,090

Art. 38210 Art. 38071 Art. 38042

Modular kit for tank equipped like Art. 36320 but with Art. 38090 filter valve air intake stop for suction tube. No. 2 packing

m 3 0,090

Art. 10/20 (for Art 35320 - 36320)

kg 20

Art. 36322

Art. 38090 (for Art 35322 - 36322)

kg 20

Art. 36602

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 196

TANK DISPENSING KIT

196 196 with central pump and open hose reel

Kit for dispensing from tank. A complete solution for dispensing oil and allied products. The dispensing pump and the enclosed hose reel are fixed directly to the tank by means of sturdy brackets.

Note: The tank is not part of the Kit

Art. 36610 (R 3:1 - 14 l/min) Art. 36620 (R 5:1 - 18 l/min) Art. 36630 (R 7:1 - 30 l/min) Art. 36610 Dispensing kit for oil and allied products with pump inserted centrally and enclosed hose reel, complete with: Art. 35163 pump R 3:1 - 14 l/min - Art. 36601 support bracket - Art. 8430.401 hose reel with 10 m hose ø 1/2” meternig gun - Art. 37735 - Art. 38071 nipple 1/2” x 1/2” G M/M - Art. 88630 drip tray No. 4 packing

m 3 0,250

kg 48

Art. 92C/71 (for Art 36630)

Art. 35163 (for Art 36610)

Art. 36063 (for Art 36620)

Art. 38071

Art. 36620 Dispensing kit for oil and allied products, equipped like Art. 36610 but with pump: pump R 5:1 - 18 l/min Art. 36063 No. 4 packing

m 3 0,250

kg 49

Art. 36630 Dispensing kit for oil and allied products with pump inserted centrally and enclosed hose reel complete with: - Art. 92C/71 pump R 7:1 - 30 l/min - Art. 36601 support bracket - Art. 8540.401 hose reel with 15 m hose ø 3/4” - Art. 37771 meternig gun - Art. 33119 nipple 1” x 3/4” G M/M - Art. 10/15 bung adaptor ø 53 - Art. 88630 drip tray

Art. 33119 Art. 10/15 Art. 8430.401 (for Art 36610 - 36620)

Art. 8540.401 (for Art 36630)

Art. 37771 No. 4 packing

m 3 0,270

kg 70

(for Art 36630)

Art. 37735 (for Art 36610 - 36620)

Art. 88630

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 197

TANK DISPENSING KIT

197 197

with central pump

and enclosed hose reel

Kit for dispensing from tank. A complete solution for dispensing oil and allied products. The dispensing pump and the enclosed hose reel are fixed directly to the tank by means of sturdy brackets.

Note: The tank is not part of the Kit

Art. 36611 (R 3:1 - 14 l/min) Art. 36621 (R 5:1 - 18 l/min) Art. 36611 Dispensing kit for oil and allied products with pump inserted centrally and enclosed hose reel, complete with: Art. 35163 pump R 3:1 - 14 l/min - Art. 36601 support bracket - Art. 8450.401 hose reel with 10 m hose ø 1/2” meternig gun - Art. 37735 - Art. 38071 nipple 1/2” x 1/2” G M/M - Art. 88630 drip tray No. 4 packing

m 3 0,260

kg 53

Art. 35163 (for Art 36611)

Art. 36063 (for Art 36621)

Art. 8450.401 (for Art 36611 - 36621)

Art. 36621 Dispensing kit for oil and allied products, equipped like Art. 36611 but with pump: pump R 5:1 - 18 l/min Art. 36063

Art. 38071 No. 4 packing

m 3 0,260

kg 54

Art. 36601 Drum fixing brackets for pump and hose reel No. 1 packing

m 3 0,029

kg 8,6

Art. 36601 Bracket for 1 m width tank

Art. 88630

Art. 37735 (for Art. 36611 36621)

CATALOGO LIST 217 pag 171-198 GB ok

23-06-2006

14:16

Pagina 198

OIL BAR

198 198 wall-mounted Oil bar ideal for dispensing oil and antifreeze liquid. Fed by air pump or with connection to a centralised system. It offers the availability of up to 3 different types of oil and antifreeze liquid. Quick and easy drawing of oil with possibility of controlling the quantity by means of the digital litre-counter.

Art. 37686

Art. 37690

Art. 37691

Oil bar equipped with 1 tap (Art. 37692)

Oil bar equipped with 1 tap (Art. 37692) and 1 digital litre-counter kit (Art. 37694)

No. 1 packing

m 3 0,136

kg 23,8

No. 1 packing

m 3 0,136

kg 25

Art. 37689

Art. 37687

Oil bar equipped with 2 taps (Art. 37692)

Oil bar equipped with 2 taps (Art. 37692) and 2 digital litre-counter kits (Art. 37694)

No. 1 packing

m 3 0,136

kg 25,0

No. 1 packing

m 3 0,136

kg 26,5

Art. 37688

Art. 37686

Oil bar equipped with 3 taps (Art. 37692)

Oil bar equipped with 3 taps (Art. 37692) and 3 digital litre-counter kits (Art. 37694)

No. 1 packing

m 3 0,136

kg 26,2

No. 1 packing

m 3 0,136

kg 28

Note: A max. of 3 taps and 3 digital litre-counter kits can be fitted on the oil bar. For other combinations according to needs (see accessories on page 202)

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 199

199 199

TECHNICAL CHARACTERISTICS

Installation of an oil bar equipped with 3 taps and fed by air pump through hoses (Art. 37695). After connecting the compressed air system to the feed pump, delivery is activated by operating the tap lever. Connection recommended for short distances.

Installation of an oil bar equipped with 3 taps and fed by air pump through a centralised system. The oil bar is connected to the centralised system by means of a 60 cm hose (Art. 37693). After connecting the compressed air system to the feed pump, delivery is activated by operating the tap lever.

OVERALL DIMENSIONS 165

460

Equipped with an easy to clean, removable drip-catcher tray and sturdy support grid.

670

Tap with double valve and antisplash filter to guarantee delivery while preventing sprays caused by possible air bubbles in the system. Closing is automatic when the lever is released. STOP

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

200 200

15:09

Pagina 200

OIL BAR for oil from drum

Drum oil bar. Ideal for dispensing oil and antifreeze liquid. The delivery tap is connected directly to the feed pump. Very compact, it enables quick filling of jugs or other small containers.

Art. 37683

Art. 37699

Art. 37698

Art. 37697 Art. 37697 Oil bar for drums, equipped with: - Art. 35194 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor - Art. 37683 tap for oil bar with connection to pump - Art. 37699 drip-catcher tray No. 2 packing

m 3 0,034

kg 12

Art. 37698 Oil bar for drums, equipped with: - Art. 35194 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor - Art. 37683 tap for oil bar with connection to pump No. 2 packing

m 3 0,025

kg 9,5

Art. 37699 Drip-catcher tray No. 1 packing

m 3 0,014

kg 2,5

Art. 37683 Tap for oil bar with connection to pump, equipped with: - Art. 37681 tap for oil bar - Art. 37682 tap/pump connection hose

Important: Do not use flammable or corrosive liquids.

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 201

KIT FOR OIL BAR

201 201

feed pump Kit for feeding the oil bar with pump R 3:1 or with diaphragm pump series 1/2”. Recommended for short-distance connections (3 - 4 m) from the storage point. One kit is necessary for each oil bar tap. After connecting the compressed air system to the feed pump, delivery is activated by operating the tap lever.

Art. 33501 (R 1:1 - 60 l/min) Art. 37695 (R 3:1 - 14 l/min) Art. 37695

Art. 33500

Kit with drum pump for feeding oil bar, equipped with: Art. 35194 pump R 3:1 - 14 l/min - Art. 38042 bung adaptor hose 1/2” – 4 m - Art. 996.304 - elbow MM 1/2” - nipple MF1/2” No. 2 packing

m 3 0,033

Art. 33118

Art. 996.304

(for Art. 33501)

nipple M/F 1/2”

Art. 35194 (for Art. 37695)

kg 9,3

Art. 33501 Kit with drum pump for feeding oil bar, equipped with: - Art. 33500 diaphragm pump R 1:1 - 60 l/min - Art. 996.304 tube 1/2”- 4 m - Art. 33118 nipple 3/4”x1/2” M/M - elbow M/F 1/2” - nipple MF 1/2” No. 2 packing

m 3 0,050

kg 14

elbow M/M 1/2” M/F 1/2”

The kit, is recommended for short-distance connections (3 - 4 m). One kit is necessary for each oil bar tap.

Note: the oil bar can be fed by all the oil dispensing pumps of the RAASM range

Art. 38042

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

202 202

15:09

Pagina 202

OIL BAR ACCESSORIES Art. 37692 Double valve tap with antisplash filter for oil bar

Art. 37681 Double valve tap for oil bar

Art. 37692 Both articles guarantee maximum delivery while preventing sprays caused by possible air bubbles in the system. Closing is automatic upon releasing the lever.

Art. 37681 Art. 37682 Pump oil bar tap connection tube

Art. 37682 Art. 37693 Kit for connecting oil bar to fixed system, equipped with: - Art. 996.301 tube 1/2” M/F - 1 m - elbow M/F 1/2” - nipple M/F 1/2”

Art. 37693 Art. 37694 Digital litre-counter kit for oil bar, equipped with: - Art. 37722 digital litre-counter - connection unions

Art. 37694 (*)

Art. 38102 2-litre jug

Art. 38105 5-litre jug

Art. 38105 Art. 38102 (*) Articles not manufactured by us

STOP

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 203

HOSE REEL KIT

203 203

open - enclosed hose reel for oil and allied products Complete open and enclosed hose reel kits for dispensing oil and allied products. They can be supplied with 1/2” or 3/4” and 1” hose and with series 3/8”, series 1/2” and 3/4” guns. Application is by connection to a fixed system or directly to the air-operated dispensing pump. for other hose reels see page 370 for other guns see page 210

Art. 36910 Art. 36920 Art. 36930

Art. 36912

Art. 88630

Art. 36910

Art. 88630

Kit for oil and similar with open hose reel, complete with: - Art. 8420.401 hose reel with 10 m hose ø 1/2” - 150 bar - Art. 37735 oil gun with digital litre-counter - Art. 88630 modular drip-tray

Modular drip-tray. Equipped with hook for gun and removable drip-tray. Applied under the hose reel, it is a handy holder for the delivery gun. Essential for a clean and orderly workplace.

No. 3 packing

m 3 0,110

kg 30

Art. 36912

Art. 8440.401

Art. 8420.401

Art. 8550.401

Kit for oil and similar with enclosed hose reel, complete with: - Art. 8440.401 hose reel with 10 m hose ø 1/2” - 150 bar - Art. 37735 oil gun with digital litre-counter modular drip-tray - Art. 88630

(for Art. 36912)

(for Art. 36910)

(for Art. 36920)

No. 3 packing

m 3 0,120

Art. 8540.403 (for Art. 36930)

kg 35

Art. 36920 Kit for oil and similar with open hose reel, complete with: - Art. 8550.401 hose reel with 10 m hose ø 3/4” - 150 bar oil gun with digital litre-counter - Art. 37771 nipple 3/4”x1/2” F/M - Art. 33275 - Art. 88630 modular drip-tray No. 3 packing

m 3 0,180

kg 45

Art. 36930 Kit for oil and similar with open hose reel, complete with: - Art. 8540.403 hose reel with 15 m hose ø 1” - 150 bar high capacity oil gun - Art. 33153 - Art. 33276 nipple 1”x3/4” F/M - Art. 88630 modular drip-tray No. 3 packing

m 3 0,180

kg 52

Art. 88630

Art. 33153

Art. 37735

Art. 37771

CATALOGO LIST 217 pag 199-230 GB ok per pdf

204 204

23-06-2006

15:09

Pagina 204

VOLUMETRIC METERS Art. 37722

(*) (*)

DIMO digital litre-counter (weight 570 g) for oil and antifreeze liquid, equiipped with: - connection F/F 1/2” - standard penlight battery powered Standard in all oil dispensing kits equipped with digital litre-counter.

Art. 37722 (*) (*)

Art. 37711 Digital litre-counter (weight 640 g) for oil and antifreeze liquid, equipped with: - connection F/F 1/2” - long-life welded battery powered

Art. 37711 (*) (*)

Art. 37701 Mechanical litre-counter (weight 1 kg) for oil, equipped with: - connection F/F 1/2” - indicator 0-10 litres

Art. 37701 (*) Not type-approved for public use (*) Articles not manufactured by us

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 205

VOLUMETRIC METERS (*) (*)

205 205

Art. 33701 Digital litre-counter (weight 1,6 Kg) for oil and antifreeze liquid, ideal for high capacity transfer pumps, equipped with: - connection F/F 3/4” - 1” - standard penlight battery powered

Art. 33701 (*) (*)

Art. 33703 Digital litre-counter (weight 3,2 Kg) for diesel oil, oil and antifreeze liquid, ideal for high capacity transfer pumps, equipped with: - connection F/F 1.1/2” - standard penlight battery powered

Art. 33703 (*) (*)

Art. 33705 Digital litre-counter (weight 1,6 Kg) for diesel oil, ideal for high capacity transfer pumps, equipped with: - connection F/F 1” - standard penlight battery powered

Art. 33705 (*) Not type-approved for public use (*) Articles not manufactured by us

Article

37722

37711

37701

33701

33703

33705

oils, lubricants and similar

oils and similar, diesel oil

diesel oil

Inlet

1/2” F

3/4”-1” F

1.1/2” F

1” F

Outlet

1/2” F

3/4”-1” F

1.1/2” F

1” F

Min. delivery

1 l/min

0,5 l/min

6 l/min

15 l/min

10 l/min

Max. delivery

20 l/min

30 l/min

15 l/min

60 l/min

150 l/min

100 l/min

Max. pressure

60 bar

70 bar

20 bar

30 bar

Tolerance

+/- 0,5%

+/- 0,3%

+/- 0,5%

Max. viscosity

SAE 240

SAE 130

diesel oil

Weight

570 g

640 g

1000 g

1600 g

3200 g

1600 g

Compatible fluids

CATALOGO LIST 217 pag 199-230 GB ok per pdf

206 206

23-06-2006

15:09

Pagina 206

VOLUMETRIC GUNS

(*) (*)

Art. 37720 Digital dispensing gun with preselection for oil. equipped with - inlet swivel joint 1/2” F - adjustable rigid terminal - automatic closing nozzle ø 14

Art. 37720

(*)

Art. 37703 Gun with mechanical litre-counter for oil (Art. 37701), equipped with: - inlet swivel joint 1/2” F - flexible terminal - semiautomatic nozzle ø 16

Art. 37703 (*) Not type-approved for public use (*) Articles not manufactured by us

Article Compatible fluids

37720

37703

oils, lubricants and allied products

Inlet

1/2” F

Min. delivery

1 l/min

Max. delivery

20 l/min

15 l/min

Max. pressure

70 bar

Tolerance

+/- 0,5%

Max. viscosity

SAE 240

Fluid temperature

max 50° C

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 207

CATALOGO LIST 217 pag 199-230 GB ok per pdf

208 208

23-06-2006

15:09

Pagina 208

OIL GUNS

series 3/8” - T

series 3/8” - L

series 3/8” - P

series 1/2”

series 3/4”

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:09

Pagina 209

GUNS FOR OIL AND SIMILAR

209 209

series 3/8” - T Oil gun series 3/8” - T in technopolymer (see page 210), equipped with: - opening control with s/steel ball - inlet swivel joint 1/2”F - flexible terminal with semiautomatic nozzle ø 16

series 3/8” - L Oil gun series 3/8” - L in aluminium alloy (see page 212), equipped with: - balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions - inlet swivel joint 1/2”F, - flexible terminal with semiautomatic nozzle ø 16 - fluid identification coloured caps (supplied for all the range)

series 3/8” - P Oil gun series 3/8” - P in aluminium alloy (see page 214) equipped like series 3/8” - L but with lever locking button.

series 1/2” Oil gun series 1/2” in aluminium alloy (see page 216) equipped with: - balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions - inlet swivel joint 1/2”F - lever locking button - flexible terminal with semiautomatic nozzle ø 21 - fluid identification coloured caps (supplied for all the range)

series 3/4” Oil gun series 3/4” high capacity in aluminium alloy (see page 218) equipped with: - balanced opening valve in brass, for even pressure on the lever in low and high pressure conditions - lever locking button - inlet swivel joint 3/4”F, - straight flexible terminal with semiautomatic high delivery nozzle ø 35

Series

3/8” - T

3/8” - L

3/8” - P

1/2”

3/4”

Delivery

30 l/min 60 bar F 1/2”G Viton

40 l/min 70 bar F 1/2”G Viton

65 l/min 100 bar F 1/2”G Viton

85 l/min 100 bar F 3/4”G Viton

Max. pressure Inlet union Seals

Inlet filter Coloured caps (supplied for series L - P, 3/8” and 1/2”)

CATALOGO LIST 217 pag 199-230 GB ok per pdf

210 210

23-06-2006

15:09

Pagina 210

OIL GUNS

Series 3/8” - T

Art. 38023 Grip in technopolymer for oil gun equipped with 1/2”F inlet swivel joint - outlet 3/8”F

Art. 38025 (weight 700 g) Oil gun equipped with 1/2” F, inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 16

Art. 38024 Oil gun equipped with 1/2” F, inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 16

Art. 33120 Oil gun equipped with 1/2” F inlet swivel joint, high delivery rigid terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

OIL GUNS

15:09

Pagina 211

Series 3/8” - T

211 211

Art. 37711 (weight 640 g)

Art. 37722 (weight 570 g)

Digital litre-counter (see page 204)

Art. 37713 (weight 1,4 Kg)

Art. 37725 (weight 1,3 Kg)

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F, inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F, inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Art. 37712

Art. 37726

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F, inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Art. 37718

Art. 37727

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, high delivery rigid terminal.

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, rigid terminal and high delivery rigid terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

212 212

23-06-2006

15:09

Pagina 212

OIL GUNS

Series 3/8” - L

supplied for all the range

Art. 38020 Grip in aluminium for oil gun equipped with 1/2”F - inlet swivel joint and 3/8”F outlet swivel joint

Art. 38022 (weight 700 g) Oil gun equipped with 1/2”F, inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 16

Art. 38021 Oil gun equipped with 1/2”F, inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 16

Art. 33121 Oil gun equipped with 1/2”F inlet swivel joint, high capacity rigid terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

OIL GUNS

15:09

Pagina 213

Series 3/8” - L

Art. 37711 (weight 640 g)

Art. 37722 (weight 570 g)

Digital litre-counter (see page 204)

213 213

Supplied for all the range

Art. 37714 (weight 1,4 Kg)

Art. 37735 (weight 1,3 Kg)

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F, inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F, inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Art. 37715

Art. 37736

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F, inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F, inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Art. 37717

Art. 37737

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, high delivery rigid terminal

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, and high capacity rigid terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

214 214

23-06-2006

15:09

Pagina 214

OIL GUNS

Series 3/8” - P

Supplied for all the range

lever locking button Art. 37740 Grip in aluminium alloy for oil gun equipped with 1/2”F inlet swivel joint, 3/8”F outlet - lever locking button

Art. 37741 (weight 700 g) Oil gun equipped with 1/2”F inlet swivel joint, flexible terminal, semiautomatic drip-catcher nozzle ø 16 and lever locking button

Art. 37742 Oil gun equipped with 1/2”F inlet swivel joint, rigid terminal, semiautomatic drip-catcher nozzle ø 16 and lever locking button

Art. 37743 Oil gun equipped with 1/2”F inlet swivel joint, high capacity rigid terminal and lever locking button

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

OIL GUNS

15:10

Pagina 215

Series 3/8” - P

215 215

Art. 37711 (weight 640 g)

Art. 37722 (weight 570 g)

Digital litre-counter (see page 204)

Art. 37744 (weight 1,4 Kg)

Art. 37747 (weight 1,3 Kg)

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, flexible terminal and drip-catcher nozzle ø 16

Art. 37745

Art. 37748

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, rigid terminal and drip-catcher nozzle ø 16

Art. 37746

Art. 37749

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, high capacity rigid terminal

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, high capacity rigid terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

216 216

15:10

Pagina 216

OIL GUNS

Series 1/2”

Supplied for all the range

lever locking button Art. 37750 Grip in aluminium for oil gun equipped with 1/2”F inlet swivel joint - 1/2”F outlet - lever locking button

Art. 37751 (weight 1,35 Kg) Oil gun equipped with 1/2”F inlet swivel joint, flexible terminal and semiautomatic drip-catcher nozzle ø 21 - lever locking button

Art. 37752 Oil gun equipped with 1/2”F inlet swivel joint, rigid terminal and semiautomatic drip-catcher nozzle ø 21 - lever locking button

Art. 33140 High capacity oil gun equipped with 1/2”F inlet swivel joint, rigid terminal - lever locking button

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

OIL GUNS

Pagina 217

Series 1/2”

217 217

Art. 37711 (weight 640 g)

Art. 37722 (weight 570 g)

Digital litre-counter (see page 204)

Art. 37765 (weight 2 Kg)

Art. 37771 (weight 1,9 Kg)

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, flexible terminal and drip-catcher nozzle ø 21

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, flexible terminal and drip-catcher nozzle ø 21

Art. 37766

Art. 37772

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint, rigid terminal and drip-catcher nozzle ø 21

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint, rigid terminal and drip-catcher nozzle ø 21

Art. 37767

Art. 37773

Oil gun equipped with digital litre-counter Art. 37711, 1/2”F inlet swivel joint and high capacity terminal

Oil gun equipped with digital litre-counter Art. 37722, 1/2”F inlet swivel joint and high capacity terminal

CATALOGO LIST 217 pag 199-230 GB ok per pdf

218 218

23-06-2006

15:10

Pagina 218

DELIVERY GUNS

lever locking button Art. 33150

Art. 33151

Art. 33152

Art. 33153

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

Pagina 219

Series 3/4”

219 219

Art. 33150

Art. 33152

High delivery oil gun grip, equipped with: - 3/4” F inlet swivel joint - 3/4” F outlet - lever locking button Ideal for high deliveries in transferring oil, lubricants and allied products

High delivery oil gun grip, equipped with: - 3/4” F inlet swivel joint - lever locking button - rigid terminal and drip-catcher nozzle ø 35 Ideal for high deliveries in transferring oil, lubricants and allied products

Art. 33151

Art. 33153

High delivery oil gun grip, equipped with: - 3/4” F inlet swivel joint - lever locking button - flexible terminal and drip-catcher nozzle ø 35 Ideal for high deliveries in transferring oil, lubricants and allied products

High delivery oil gun grip, equipped with: - 3/4” F inlet swivel joint - lever locking button - rigid terminal with free outlet Ideal for high deliveries in transferring oil, lubricants and allied products

Article

33150

33151

33152

33153

Delivery

90 l/min 100 bar swivel joint 3/4”F 3/4”F Viton

80 l/min 100 bar swivel joint 3/4”F nozzle ø 35 mm Viton

90 l/min 100 bar swivel joint 3/4”F hose ø 26 mm Viton

Max. pressure Inlet union Outlet union Seals

Important: Do not use flammable or corrosive liquids.

CATALOGO LIST 217 pag 199-230 GB ok per pdf

220 220

23-06-2006

15:10

OIL GUNS

Pagina 220

Series 3/8” - T - L - P

Art. 38010 Art. 38015

Art. 38023

Art. 38016 Art. 38011

Art. 38017

Art. 38062 Art. 38013 Art. 38018

Art. 38012

Art. 38020 Art. 37740

Art. 38015

Art. 38013

Semiautomatic drip-catcher nozzle ø 10

Rigid terminal 45° with semiautomatic drip-catcher nozzle ø 16

Art. 38016

Art. 38012

Semiautomatic drip-catcher nozzle ø 16

High delivery rigid terminal with free outlet ø 20

Art. 38017

Art. 38023

Semiautomatic drip-catcher nozzle ø 8

Grip in technopolymer with inlet swivel joint 1/2” F

Art. 38018

Art. 38020

Semiautomatic drip-catcher nozzle ø 8 with curved spout

Grip in aluminium alloy with inlet swivel joint 1/2” F

Art. 38010

Art. 37740

Flexible terminal with semiautomatic drip-catcher nozzle ø 16

Grip in aluminium alloy with 1/2” F inlet swivel joint and lever locking button

Art. 38011

Art. 38062

Rigid terminal with semiautomatic drip-catcher nozzle ø 16

Swivel joint for oil gun, 1/2” M/F

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

OIL GUNS

Pagina 221

Series 1/2”

221 221

Art. 38029

Art. 38034 Art. 38030

Art. 38035 Art. 38031

Art. 37750

Art. 38063

Art. 38032

Art. 38034

Art. 38031

Semiautomatic drip-catcher nozzle ø 21

Rigid terminal 45° with semiautomatic drip-catcher nozzle ø 21

Art. 38035

Art. 38032

Semiautomatic drip-catcher nozzle ø 27

High delivery rigid terminal free outlet ø 20

Art. 38029

Art. 37750

Flexible terminal Semiautomatic drip-catcher nozzle ø 21

Grip in aluminium alloy with inlet swivel joint 1/2” F and lever locking button

Art. 38030

Art. 38063

Rigid terminal with semiautomatic drip-catcher nozzle ø 21

Swivel joint for oil gun, inlet 1/2” M/F

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

222 222

15:10

Pagina 222

GUNS

Series 3/4”

Art. 38037

Art. 38040 Art. 38038

Art. 33150

Art. 38039

Art. 38040

Art. 38039

High delivery semiautomatic drip-catcher nozzle ø 35

High delivery rigid terminal with free outlet ø 26

Art. 38037

Art. 33150

High delivery flexible terminal with semiautomatic drip-catcher nozzle ø 35

Grip in aluminium alloy with inlet swivel joint 3/4” F

Art. 38038

Art. 38065

High delivery rigid terminal 45° with semiautomatic drip-catcher nozzle ø 35

Swivel joint for oil gun, high delivery, inlet 3/4” M/F

Art. 38065

CATALOGO LIST 217 pag 199-230 GB ok

28-06-2006

16:46

Pagina 223

DELIVERY GUNS

223 223 Art. 33122 High delivery oil gun for transfer, equipped with: - 3/4”F inlet swivel joint (max 8 bar) - rigid terminal with free outlet Ideal for high deliveries in transferring oil, waste oil and antifreeze liquid. Note: It is advisable to use it with hose 3/4” (Art. 997.505) and with pumps R 1:1 (max 8 bar)

Art. 33122 Art. 33123 Ball cock, equipped with: - 3/4”F inlet connection - rigid terminal with free outlet Ideal for high deliveries in transferring oil, waste oil and antifreeze liquid. Note: It is advisable to use it with hose 3/4” (Art. 997.505) and with pumps R 1:1

Art. 33123 Art. 33440 Gun for antifreeze, windshield washing liquid and water - 1/2”F inlet swivel joint - rigid terminal with free outlet

Art. 33440 Important: Do not use flammable or corrosive liquids.

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

224 224

15:10

Pagina 224

ACCESSORIES Art. 38046 Bung adaptor ø 32 mm, with double body for pumps with suction tube, series 500

Art. 33434 Bung adaptor ø 34 mm, with double body for pumps with suction tube, series 600

Art. 38046 Art. 33434 Art. 38042

Art. 38042 Bung adaptor ø 42 mm, with double body for pumps with suction tube, series 600 and 650

Art. 38051 Bung adaptor ø 50 mm, for pumps with suction tube, series 500

Art. 10/15 Bung adaptor ø 53 mm for industrial pumps with suction tube, series 900 and 1200

Art. 38051 Art. 10/15 Art. 38047 Wall bracket ø 32 mm with clamping system with double body for wall-mounting of pumps, series 500

Art. 38043

Art. 38047 Art. 38043

Wall bracket ø 42 mm with clamping system with double body for wall-mounting of pumps, series 600 and 650

Art. 38052 Wall bracket ø 50 mm with clamping system with screw for wall-mounting of pumps, series 500

Art. 38052 Art. 33115 Wall bracket in steel for wall-mounting of transfer pumps, series 600 and 650

Art. 33115

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

Pagina 225

ACCESSORIES Art. 33590 Wall bracket in painted steel for wall-mounting of diaphragm pumps 1/2“

Art. 33591 Art. 33590 Art. 33591

Wall bracket in painted steel for wall-mounting of diaphragm pumps 1“

Art. 10/10 Wall bracket in painted steel for wall-mounting of integral and flanged industrial pumps, series 900 and 1200

Art. 10/10 Art. 10/11 Wall bracket in painted steel with dampers for wall-mounting of integral and flanged industrial pumps, series 900 and 1200

Art. 10/11 Art. 10/12 Wall bracket in painted steel for wall-mounting of dissociated industrial pumps, series 900 and 1200

Art. 10/12 Art. 10/13 Wall bracket in painted steel with dampers for wall-mounting of dissociated industrial pumps, series 900 and 1200

Art. 10/13 Art. 10/18 Wall bracket in painted steel with dampers for wall-mounting of dissociated industrial pumps ø 100 mm, series 900 and 1200

Art. 10/18

225 225

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

226 226

15:10

Pagina 226

ACCESSORIES

Art. 38071 Art. 38072 Art. 38073 Art. 33116 Art. 33117 Art. 33118 Art. 33119 Art. 33275 Art. 33276

Art. 38075 Art. 38076 Art. 38077 Art. 38078 Art. 33112 Art. 33113 (*)

Art. 38071 Art. 38072 Art. 38073 Art. 33116 Art. 33117 Art. 33118 Art. 33119 Art. 33275 Art. 33276

Nipple 1/2”G x 1/2”G - M/M

Art. 38075 Art. 38076 Art. 38077 Art. 38078 Art. 33112 Art. 33113

Nipple M 1/2”G x F 1/2”NPT

Nipple 1/2”G x 3/8”G - M/M Nipple 3/8”G x 3/8”G - M/M Nipple 1”G x 1”G - M/M Nipple 3/4”G x 3/4”G - M/M Nipple 1/2”G x 3/4”G - M/M Nipple 1”G x 3/4”G - M/M Nipple 3/4”G x 1/2”G - F/M Nipple 1”G x 3/4”G - F/M

Nipple F 1/2”G x M 1/2”NPT Nipple F 3/8”G x M 3/8”NPT Nipple M 3/8”G x F 3/8”NPT Nipple M 3/4”G x F 3/4”NPT Nipple M 1/2”G x F 3/4”NPT

Art. 38070 90° union - 1/2” G - M/F

Art. 38070 (*)

Art. 33126

Female quick connector - thread 3/4”G - F - high pressure 250 bar

Art. 33127

(*)

Male quick connector - thread 3/4”G - F - high pressure 250 bar

Art. 33127 Art. 38091 Check valve with connection for flexible hose 1.1/4” - thread 1”G - M to be fitted on the draining cock of tanks

Art. 38091 (*) Articles not manufactured by us

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

Pagina 227

ACCESSORIES Art. 38027 Rigid suction tube ø 42 - 940 mm foot valve with filter for combining with wall-mounted pumps

Art. 38055 Rigid suction tube ø 42 - 1260 mm foot valve with filter for combining with wall-mounted pumps

Art. 38027

Art. 38055 Art. 33427 Rigid s/steel suction tube ø 34 - thread 1” M - 940 mm for combining with wall-mounted s/steel pumps

Art. 33581 Rigid suction tube ø 34 - thread 1” M - 940 mm for combining with diaphragm pumps

Art. 33582 Rigid suction tube ø 34 - thread 1” M - 1240 mm for combining with diaphragm pumps

Art. 33427

Art. 33581 Art. 33582

227 227

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

228 228

15:10

Pagina 228

ACCESSORIES Art. 38026 Flexible suction tube ø 1.1/4” - length 2 m for wall-mounted pumps

Art. 38028 Flexible suction tube ø 1.1/4” - length 1 m for wall-mounted pumps

Art. 38026 Art. 38028 Art. 33426 Flexible suction tube ø 3/4” - lenght 2 m for wall-mounted s/steel pumps

Art. 33426 Art. 993.201 Hose - 1/4” M/F - 1 m 20 bar

Art. 993.202 Hose - 1/4” M/F - 2 m 20 bar

Art. 996.301 Hose - 1/2” M/F - 1 m 150 bar

Art. 996.302 Hose - 1/2” F/F - 2 m 150 bar

Art. 996.304 Hose - 1/2” M/F - 4 m 150 bar

Art. 993.201 Art. 993.202 Art. 996.301 Art. 996.302 Art. 996.304 Art. 997.505 Art. 998.501 Art. 998.501

Art. 997.505 Hose 3/4” M/F - 5 m 150 bar

Art. 998.501 Hose 1” M/F - 1 m 150 bar

Art. 998.502 Hose 1” M/F - 2 m 150 bar

Art. 38210

(*)

Ball cock 1/2” total passage for system - max. pressure 70 bar

Art. 38211 Ball cock 1” total passage for system - max. pressure 70 bar

Art. 38210 Art. 38211

CATALOGO LIST 217 pag 199-230 GB ok per pdf

23-06-2006

15:10

Pagina 229

ACCESSORIES

229 229

Art. 65160

Union F 2”

Drum cover ø 600 mm for drums 180 - 220 Kg - 2” fixing union arranged for pump clamping ring

Art. 65142 Drum cover ø 420 mm for drums 50 - 60 Kg - 2” fixing union arranged for pump clamping ring

Art. 65138 Art. 65160 Art. 65142 Art. 65138

Drum cover ø 385 mm for drums 30 - 50 Kg - 2” fixing union arranged for pump clamping ring

Art. 38095

(*)

“Y” filter in line - 1/2” F/F for fitting on the outlet of pumps for oil and allied products - max pressure 100 bar

Art. 38095 Art. 38096

Art. 38096 “Y” filter in line - 1” F/F for fitting on the outlet of pumps for oil and allied products - max pressure 100 bar

Art. 38097 Flow regulator chamber 3/4” F/F equipped with: - one-way valve eliminates sudden pressure changes, ensuring a regular flow - max pressure 100 bar

Art. 38098

Art. 38097 Art. 38098 (*)

Flow regulator chamber 3/4” F/F with air tank equipped with: - one-way valve eliminates sudden pressure changes, ensuring a regular flow - max pressure 100 bar

Art. 38099 System overpressure control valve - 1/2” F/F - Calibration 5 - 50 bar

Art. 38100 System overpressure control valve - 3/4” F/F - Calibration 5 - 50 bar

Art. 38099 Art. 38100 (*)

Art. 37812 Pressure regulator with condensate discharge filter, lubricator, pressure gauge and inlet-outlet connections 1/4” F/F

Art. 37817 Pressure regulator with condensate discharge filter, lubricator, pressure gauge and inlet-outlet connections 1/2” F/F

Art. 37812 Art. 37817 (*) Articles not manufactured by us

CATALOGO LIST 217 pag 199-230 GB ok per pdf

230 230

23-06-2006

15:10

Pagina 230

FLUID STORAGE MANAGEMENT 1 2

1 2 3 4 5 6 7

Art. 39281 Art. 39286-39287 Art. 39289 Art. 39280 Art. 39290 Art. 39284-39285 Art. 39282

The use of electropneumatic accessories enables effective and safe management of activation and control of the storage room, a place from where the distribution - delivery stations inside the workshop are fed through a fixed system. The are two possibilities of control with low-voltage power supply (24 V - DC): - activation or simultaneous stopping of all the pumps through the application of a timer for daily/weekly programming. The timer controls a solenoid valve which shuts off the main compressed air feed. The system is supported by a main stop pushbutton in case of emergency. - activation of each single pump through the application of a solenoid valve at the inlet of the compressed air that feeds it. The system is supported by a selector for automatic or manual feed.

(*)

Art. 39281 Feeder 220/24 V -D.C. - 6 Amper It supplies power to all accessories (24 V) that can be applied on the fluid management system.

Art. 39281 Art. 39280

(*)

Timer with daily and weekly programming for programmed activation. Solenoid valve 24 V - D.C.

Art. 39280 (*) Articles not manufactured by us

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 231

ELECTROPNEUMATIC ACCESSORIES

231 231

Art. 39290

(*)

Electric line main stop pushbutton

Art. 39290 (*)

Art. 39289 Luminous acoustic flashing light Combined with a level indicator to signal when the fluid in the drum or tank is finished

Art. 39289 (*)

Art. 39282 Automatic - manual selector 24V - D.C., for feeding solenoid valves

Art. 39282 Art. 39286

(*)

Pneumatic solenoid valve 24 V - D.C., connections FxF 1/4” with hole for air discharge

Art. 39287 Art. 39286 Art. 39287 (*)

Pneumatic solenoid valve 24 V - D.C., connections FxF 1/2” with hole for air discharge

Art. 39284 Pneumatic solenoid valve 24 V - D.C., connections FxM 1/4”, complete with pressure reducer 0 - 8 bar

Art. 39285 Art. 39284 Art. 39285

Pneumatic solenoid valve 24 V - D.C., connections FxM 1/2”, complete with pressure reducer 0 - 8 bar

Art. 39260

(*)

Control unit with display of liquid level in the tank (see page 149)

Art. 39260 Art. 39261

(*) Articles not manufactured by us

Art. 39261 Control unit with direct connection to PC and display of liquid level in the tank (see page 149)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

232 232

23-06-2006

15:14

Pagina 232

EXTENSIONS FOR CUSTOMISING PUMPS MODULAR EXTENSIONS FOR WALL-MOUNTED OR DRUM OIL PUMP

1510

Art. 38085

1305

1100

1005

800

Art. 38084

After establishing the length of the suction tube to be obtained, prepare the required extension using the various modules available Art. 38085

Art. 38086

Art. 38084 Top connector 1”F for connection between pump and extension Art. 38086

Art. 38085 Extension ø 32 mm - 500 mm

Art. 38087 Art. 38087

Art. 38088

Art. 38086 Connector for extensions for connection between extensions

Art. 38087 Art. 38088

Extension ø 32 mm - 200mm

Art. 38088 Foot valve complete with union and filter

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 233

OIL PUMP FITTINGS FOR TANK

233 233

The oil transfer or dispensing pumps with suction tube ø 42 mm can be customised by means of two fittings enabling application of the modular extensions

Art. 38089 Art. 38089

Differentiated union with valve for suction tubes ø 42 mm with the foot valve removed it enables connection between the suction tube and the modular extensions

Art. 38093 Union for foot valve it connects the modular extension, added to the suction tube, to the previously removed foot valve

Art. 38093

Customisation of the rigid suction tube of a drum pump for obtaining the required length

Extension of the rigid suction tube for adapting to tank depth

Art. 38089 Art. 38084 top union for modular extensions

Art. 38085 extension ø 32

Art. 38093 filter just removed from the rigid suction tube

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

234 234

15:14

Pagina 234

EXTENSION 1” Art. 38092 Top connector - 1” thread F/F allows to connect pump 1” M thread with extension 1” M thread.

Art. 38092

Art. 10/22 Extension ø 34 - 1”G thread - M/M - 660 mm - suitable for modular and extendable pumps with 1”F connection

Art. 10/23 Extension ø 34 - 1”G thread - M/M - 960 mm - suitable for modular and extendable pumps with 1”F connection

Art. 10/24 Extension ø 34 - 1”G thread - M/M - 1260 mm - suitable for modular and extendable pumps with 1”F connection

Art. 38092

Art. 10/22 Art. 12/22 Art. 10/23 Art. 10/23

Art. 10/23

Art. 10/24

Art. 38090 Art. 10/20

Art. 38090 Foot valve with air eliminator - 1” F thread suitable to fit ø 34 extension 1”G - M thread

Art. 38090

Art. 10/20

Art. 10/20 Foot valve with filter - 1” F thread suitable to fit ø 34 extension 1”G - M thread

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 235

EXTENDABLE PUMPS SUCTION TUBE 1”

Length of customised suction tube To obtain a pump with customised suction tube: 1. obtain a water pipe (normally available on the market) ø 1” and thickness 2,5mm 2. cutting the length suitable for the container

Threading of customised suction tube 3. thread the 2 ends with 1” GAS Male 4. screw the threaded pipe between the pump and the foot valve (Art. 10/20)

Note: apply a sealant to prevent air infiltration in the pumping phase or oil leaks during stops

Art. 35161 - 36061

customised suction tube

foot valve Art. 10/20

235 235

Application of pump with customised suction tube

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 236

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 237

GREASE DISPENSING PUMPS

237 237

AIR-OPERATED GREASE PUMPS

page

238

GUNS AND ACCESSORIES

page

258

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 238

GREASE PUMPS

238 238

Ratio 50:1 Capacity 1500 g/min

Series 600

Polyurethane Seals

Series 600 air-operated pumps for short/long distance grease distribution, for high pressure greasing. Ideal for dispensing medium/high-viscosity grease. Suitable for mobile installations and centralised fixed systems.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

380 (5510) 285 (4133)

112

225

337

450 0,74

0,57 B

190 (2755) C

0 g/min (lbs/m)

0,41

380 (0,8)

750 (1,6)

1140 (2,5)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 1500 (3,3)

KIND OF FLUID: grease NLGI 1 - 20 °C

Article

62041

62048

62074

62095

Compression ratio

50:1

Air inlet connection

F1/4” G

Grease outlet connection

F3/8” G

Air working pressure

6-8 bar

Air max. pressure

8 bar

Average air consumption

330 l/min

Relative flowrate (free outlet at 6 bar)

1500 g/min

Noise level

81 dB

Suitable for drums

16 - 20 Kg

20 - 30 Kg

50 - 60 Kg

180 - 220 Kg

Suction tube length

410 mm

480 mm

740 mm

940 mm

Suction tube diameter

30 mm

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 4,6

kg 4,8

kg 6,1

kg 6,7

The suction tube is made with a combination of special steels, heat treated, without the use of seals in order to eliminate any problem of wear.

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

GREASE PUMPS Ratio 65:1 Capacity 1900 g/min

Pagina 239

Series 700

239 239

Polyurethane Seals

Series 700 air-operated pumps for short/long distance grease distribution, for high pressure greasing. Ideal for dispensing medium/high-viscosity grease. Suitable for centralised fixed systems. Recommended when delivery of a greater quantity of grease with high pressure is required.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

500 (7250) 360 (5220)

180

270

360 1,2

A A

0,9 B

230 (3335) C

0 g/min (lbs/m)

0,7

470 (1)

950 (2)

1420 (3)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 1900 (4)

KIND OF FLUID: grease NLGI 1 - 20 °C

Article

63041

63048

63074

63095

Compression ratio

65:1

Air inlet connection

F1/4” G

Grease outlet connection

F3/8” G

Air grease working pressure

6-8 bar

Air max. pressure

8 bar

Average air consumption

440 l/min

Relative flowrate (free outlet at 6 bar)

1900 g/min

Noise level

81 dB

Suitable for drums

16 - 20 Kg

20 - 30 Kg

50 - 60 Kg

180 - 220 Kg

Suction tube length

410 mm

480 mm

740 mm

940 mm

Suction tube diameter

30 mm

No. 1 packing m 3 0,010

No. 1 packing m 3 0,020

kg 5,9

kg 6,1

kg 7,4

kg 8,2

The pumps are equipped with a filter at the air inlet and a filter at the bottom of the suction tube in the sucked grease passage. They have a double valve enabling delivery of the grease in a continuous and constant flow. These devices prevent obstructions and consequent interruptions due to the passage of impurities.

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 240

GREASE PUMPS

240 240

Ratio 45:1 Capacity 4400 g/min

Series 900

Polyurethane Seals

Series 900 industrial air-operated pumps for short/long distance grease distribution, for high pressure greasing. Ideal for transferring grease and high-viscosity oil. The double action guarantees the delivery of a continuous and constant flow, suitable for the numerous needs of modern industry. The high quality of the materials used and the anticorrosion treatments reduce internal friction and limit wear over time.

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

330 (4785)

150 (3625)

100

150

200 A

170 (2465)

0 g/min (lbspm)

1100 2200 3300 4400 (2,42) (4,84) (7,26) (9,68)

1,8 1,3 1,0

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

KIND OF FLUID: grease NLGI 1 - 20 °C

Article

90F/451

91F/451

Compatible fluids

greases, high viscosity oils

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”G

Fluid outlet connection

F 1/2”G

Suction tube diameter

ø 45

Suction tube length

500 mm

940 mm

Suitable for drums

180 - 220 Kg

Relative flowrate (free outlet at 6 bar)

4400 g/min

Max. air consumption 8 bar

1,6 m3/min

Noise level

80 dB

Max. feed pressure

8 bar

No. 1 packing m 3 0,050

No. 1 packing m 3 0,070

kg 17

kg 19

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

GREASE PUMPS Ratio 70:1 Capacity 3000 g/min

Pagina 241

Series 900

Polyurethane Seals

Series 900 industrial air-operated pumps for short/long distance grease distribution, for high pressure greasing. Ideal for transferring grease and highviscosity oil. The double action guarantees the delivery of a continuous and constant flow, suitable for the numerous needs of modern industry. The high quality of the materials used and the anticorrosion treatments reduce internal friction and limit wear over time.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

510 (7395)

370 (5365)

240 (3480)

1,8 1,3 1,0

0 g/min 750 (lbspm) (1,65)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 1500 2250 (3,3) (4,95)

3000 (6,6)

KIND OF FLUID: grease NLGI 1 - 20 °C

Article

91C/701

Compatible fluids

greases, high viscosity oils

Type of seals

polyurethane/PU

Suction tube upper body

aluminium

Suction tube

carbon steel

Air inlet connection

F 1/2”G

Fluid outlet connection

F 1/2”G

Suction tube diameter

ø 45

Suction tube length

940 mm

Suitable for drums

180 - 220 Kg

Relative flowrate (free outlet at 6 bar)

3000 g/min

Max. air consumption 8 bar

1,6 m3/min

Noise level

80 dB

Max. feed pressure

8 bar No. 1 packing m 3 0,070 kg 19

241 241

CATALOGO LIST 217 pag 231-260 GB ok per pdf

242 242

23-06-2006

15:14

Pagina 242

MOBILE GREASING PLATFORMS

For drums 180 - 220 kg with hose reel

Mobile grease dispenser platform. The ideal combination for dispensing grease in any workplace. The very easy to handle trolley is equipped with a drum (180 - 220 kg) clamping device, adjustable side support for hooking accessories, and wheel with brake. The platform comes with a handy hose reel with 12 m of hose. By request the platform can be equipped with other hose reels, see page 370.

ø from 550 to 600 mm

Art. 64000 (R 50:1 - 1500 g/min) Art. 64000/65 (R 65:1 - 1900 g/min) Art. 64000/75 (R 75:1 - 4400 g/min) Art. 64000 Mobile grease dispenser platform with hose reel, for drums of 180 - 220 kg, comprising: Art. 62095 pump R 50:1 - 1500 g/min - Art. 80201 trolley - Art. 993.502 tubo 1/4” - 1,5 m - Art. 8430.501 hose reel 1/4” - 12 m - Art. 66889 gun with triple swivel joint - Art. 66892 nipple - Art. 65600 drum cover ø 60 - Art. 66590 follower plate ø 585

Art. 116F/751 (for Art. 64000/75)

Art. 63095 (for Art. 64000/65)

Art. 62095 (for Art. 64000)

No. 4 packing

m 3 0,234

kg 85,2

Art. 64000/65 Platform like Art. 64000, but with: Art. 63095 pump R 65:1 - 1900 g/min

Art. 66892

m 3 0,234

Art. 65600

No. 4 packing

kg 86,7

(for Art. 64000)

Art. 64000/75 Platform like Art. 64000, but with: Art. 116F/751 pump R 75:1 - 4400 g/min - Art. 66893 nipple 1/2” x 1/4” G M/M - Art. 10/50 drum cover ø 600 mm - Art. 10/60 follower plate ø 585 mm No. 4 packing

m 3 0,285

Art. 10/50 (for Art. 64000/75)

Art. 8430.501

Art. 993.502

kg 101

OVERALL DIMENSIONS

1330

600

Art. 66590 Art. 66889 850

920

Art. 80201

(for Art. 64000)

Art. 10/60 (for Art. 64000/75)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 243

GREASING KIT

243 243

for drums 180 - 220 kg

ø from 550 to 600 mm

Art. 64070 (R 50:1 - 1500 g/min) Art. 64070/65 (R 65:1 - 1900 g/min) Art. 64070/75 (R 75:1 - 4400 g/min) Art. 64070 Mobile grease dispenser platform for drums of 180 - 220 kg, comprising: pump R 50:1 - 1500 g/min Art. 62095 - Art. 80200 trolley - Art. 66892 nipple - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun drum cover ø 600 mm - Art. 65600 - Art. 66590 follower plate ø 585 mm No. 3 packing

m 3 0,120

Art. 116F/751 (for Art. 64070/75)

Art. 63095 (for Art. 64070/65)

Art. 62095 (for Art. 64070)

kg 64,2

Art. 64070/65 Platform like Art 64070 but with: Art. 63095 pump R 65:1 - 1900 g/min No. 3 packing

m 3 0,120

Art. 66892 Art. 993.504

kg 65,7

Art. 64070/75 Platform like Art 64070 but with: Art. 116F/751 pump R 75:1 - 4400 g/min - Art. 66893 nipple 1/2” x 1/4” G M/M - Art. 10/50 drum cover ø 600 mm - Art. 10/60 follower plate ø 585 mm No. 3 packing

m 3 0,170

Art. 66888

kg 79,7

OVERALL DIMENSIONS Art. 65600 830

(for Art. 64000)

Art. 10/50 (for Art. 64000/75) 770

700

Art. 80200

Art. 66590 (for Art. 64000)

Art. 10/60 (for Art. 64000/75)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

244 244

23-06-2006

15:14

Pagina 244

GREASING KIT for drums 50 - 60 kg

Trolley-mounted grease dispenser kit. The ideal combination for dispensing grease in any workplace. The compact trolley (Art. 80050) has 2 fixed wheels and 2 castors that make it very easy to handle. It is equipped with a pump support and is suitable for small-mediumsize containers.

Art. 64064 (R 50:1 - 1500 g/min) Art. 64064/65 (R 65:1 - 1900 g/min) Art. 64063 (R 50:1 - 1500 g/min) Art. 64064

Art. 64041

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 80050 trolley nipple 1/4” x 3/8” G M/M - Art. 66892 - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65420 drum cover ø 420 mm - Art. 66400 follower plate ø 400 mm

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: pump R 50:1 - 1500 g/min Art. 62074 - Art. 80035 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint drum cover ø 420 mm - Art. 65420 - Art. 66400 follower plate ø 400 mm

No. 3 packing

m 3 0,059

kg 22,4

No. 3 packing

m 3 0,048

kg 21

Art. 64064/65

Art. 64041/65

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: pump R 65:1 - 1900 g/min Art. 63074 - Art. 80050 trolley nipple 1/4” x 3/8” G M/M - Art. 66892 - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65420 drum cover ø 420 mm follower plate ø 400 mm - Art. 66400

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 63074 pump R 65:1 - 1900 g/min trolley - Art. 80035 - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m gun with single swivel joint - Art. 66888 - Art. 65420 drum cover ø 420 mm - Art. 66400 follower plate ø 400 mm

No. 3 packing

m 3 0,059

kg 23

No. 3 packing

m 3 0,048

kg 22,5

Art. 64063

Art. 64040

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø da 370 - 420 mm, equipped like Art. 64064 but without follower plate

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø da 370 - 420 mm, equipped like Art. 64041 but without follower plate

No. 3 packing

m 3 0,059

kg 19,5

No. 3 packing

m 3 0,048

kg 19

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 245

245 245

ø from 370 to 420 mm

Art. 64041 (R 50:1 - 1500 g/min) Art. 64041/65 (R 65:1 - 1900 g/min) Art. 64040 (R 50:1 - 1500 g/min)

Art. 64042 (R 50:1 - 1500 g/min) Art. 64042/65 (R 65:1 - 1900 g/min)

Art. 64042 Trolley-mounted grease dispenser kit , for drums 50 - 60 kg, (for Art. 64064 with external ø 370 - 420 mm, comprising: pump R 50:1 - 1500 g/min Art. 62074 - Art. 80040 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint drum cover ø 420 mm - Art. 65420 - Art. 66400 follower plate ø 400 mm m 3 0,048

No. 3 packing

kg 22

Art. 993.504

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg with external ø 370 - 420 mm, equipped like Art. 64042 but with pump R 65:1 - 1900 g/min Art. 63074 m 3 0,048

Art.

Art. 65420

kg 23,5

OVERALL DIMENSIONS

Art. 62074 (for Art. 64064 - Art. 64063 Art. 64041 - Art. 64040 Art. 64042)

Art. 66892

Art. 64042/65

No. 3 packing

Art. 63074 (for Art. 64064/65 Art. 64041/65 Art. 64042/65)

64064 1010 94064/65 1015 64063 1010 64041 1010 64041/65 1015 64040 1010 64042 1010 64042/65 1015

Art. 66888

Art. 80050

510 510 510 460 460 460 470 470

640 640 640 500 500 500 500 500

(for Art. 64064 Art. 64064/65 Art. 64063)

Art. 80035 (for Art. 64041 Art. 64041/65 Art. 64040)

Art. 80040 (for Art. 64042 Art. 64042/65)

Art. 66400

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

246 246

Pagina 246

GREASING KIT for drums 50 - 60 kg

Trolley-mounted grease dispenser kit. The ideal combination for dispensing grease in any workplace. The entirely galvanised trolleys are also suitable for carrying 20 - 60 kg containers. Their compact size makes them very easy to handle and their modularity enables compact packing for easy transport and storage.

Art. 64038 (R 50:1 - 1500 g/min) Art. 64038/65 (R 65:1 - 1900 g/min) Art. 64037 (R 50:1 - 1500 g/min) Art. 64038 Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 340 - 385 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 80035 trolley nipple 1/4” x 3/8”G M/M - Art. 66892 - Art. 993.504 hose 1/4” - 4 m gun with single swivel joint - Art. 66888 - Art. 65385 drum cover ø 385 mm - Art. 66370 follower plate ø 370 mm No. 3 packing

m 3 0,048

kg 20

Art. 64038/65

Art. 62074 (for Art. 64038 Art. 64037)

Art. 66892 Art. 993.504

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with external ø 340 - 385 mm, comprising: pump R 65:1 - 1900 g/min Art. 63074 - Art. 80035 trolley nipple 1/4” x 3/8”G M/M - Art. 66892 - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint drum cover ø 385 mm - Art. 65385 follower plate ø 370 mm - Art. 66370 No. 3 packing

Art. 63074 (for Art. 64038/65)

m 3 0,048

Art. 65385

kg 21,5

Art. 64037 Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with ext. ø 340 - 385 mm, equipped like Art. 64038 but without follower plate No. 3 packing

m 3 0,048

kg 18

Art. 66888 Art. 66370

Art. 80035

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:14

Pagina 247

247 247 without follower plate

ø from 340 to 385 mm

Art. 64039 (R 50:1 - 1500 g/min) Art. 64039/65 (R 65:1 - 1900 g/min) Art. 64039 Trolley-mounted grease dispenser kit , for drums 50 - 60 kg, with external ø 340 - 385 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 80040 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m gun with single swivel joint - Art. 66888 - Art. 65385 drum cover ø 385 mm - Art. 66370 follower plate ø 370 mm No. 3 packing

m 3 0,048

The follower plate prevents the formation of air pockets and protects the grease while preserving its characteristics. It allows total suction of the drum contents, preventing deposits on the walls and on the bottom.

Art. 63074 (for Art. 64039/65) Art. 62074 (for Art. 64039)

Art. 66892

kg 21

Art. 64039/65

Art. 993.504

Trolley-mounted grease dispenser kit, for drums 50 - 60 kg, with ext. ø 340 - 385 mm, equipped like Art. 64039 but with: pump R 65:1 - 1900 g/min Art. 63074

Art. 65385

No. 3 packing

m 3 0,048

with follower plate

kg 22,5

OVERALL DIMENSIONS

Art.

1010 64038 64038/65 1015 1010 64037 1010 64039 64039/65 1015

460 460 460 470 470

500 500 500 500 500

Art. 66888 Art. 66370

Art. 80040

CATALOGO LIST 217 pag 231-260 GB ok per pdf

248 248

23-06-2006

15:15

Pagina 248

GREASING KIT for drums 20 - 30 kg

Art. 64036 (R 50:1 - 1500 g/min) Art. 64034 (R 50:1 - 1500 g/min) Art. 64035 (R 50:1 - 1500 g/min)

Art. 64035 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 300 - 350 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min - Art. 80035 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65350 drum cover ø 350 mm - Art. 66340 follower plate ø 340 mm No. 3 packing

m 3 0,040

kg 17,5

Art. 64034

Art. 62048

Art. 66892 Art. 993.504

Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 300 - 350 mm, equipped like Art. 64035 but without follower plate. No. 3 packing

ø from 300 to 350 mm

m 3 0,040

Art. 65350

kg 15,9

Art. 64036 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with ext. ø 300 - 350 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min - Art. 80040 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65350 drum cover ø 350 mm - Art. 66340 follower plate ø 340 mm No. 3 packing

m 3 0,040

kg 18,5

Note: for overall dimensions see page 250

Art. 80035 (for Art. 64035 Art. 64034)

Art. 66888

Art. 80040

Art. 66340

(for Art. 64036)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 249

GREASING KIT

249 249

for drums 20 - 30 kg

Art. 64033/40 (R 50:1 - 1500 g/min) Art. 64032 (R 50:1 - 1500 g/min) Art. 64033 (R 50:1 - 1500 g/min)

Art. 64033 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min - Art. 80035 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65310 drum cover ø 310 mm - Art. 66310 follower plate ø 310 mm No. 3 packing

m 3 0,040

kg 17

Art. 64032 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 260 - 300 mm, equipped like Art. 64033 but without follower plate. No. 3 packing

m 3 0,040

ø from 260 to 300 mm

Art. 62048

Art. 66892 Art. 993.504 Art. 65310

kg 15

Art. 64033/40 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with ext. ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min - Art. 80040 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65310 drum cover ø 310 mm - Art. 66310 follower plate ø 310 mm No. 3 packing

m 3 0,040

kg 18

Note: for overall dimensions see page 250

Art. 80035 (for Art. 64033 Art. 64032)

Art. 66888

Art. 80040

Art. 66310

(for Art. 64033/40)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

250 250

15:15

Pagina 250

GREASING KIT for drums 20 - 30 kg

Trolley-mounted grease dispenser kit. The ideal combination for dispensing grease in any workplace. The entirely galvanised trolleys are also suitable for carrying 20 - 60 kg containers.Their compact size makes them very easy to handle and their modularity enables compact packing for easy transport and storage.

Art. 64025 (R 50:1 - 1500 g/min) Art. 64024 (R 50:1 - 1500 g/min)

Art. 64024 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 240 - 280 mm, comprising: Art. 62041 pump R 50:1 - 1500 g/min - Art. 80035 trolley - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65280 drum cover ø 280 mm - Art. 66265 follower plate ø 265 mm m 3 0,040

No. 3 packing

kg 16

ø from 240 to 280 mm

Art. 62041

Art. 66892

Art. 64025 Trolley-mounted grease dispenser kit , for drums 20 - 30 kg, with external ø 240 - 280 mm, equipped like Art. 64024 but with trolley Art. 80040 m 3 0,040

No. 3 packing

Art. 993.504 Art. 65280

kg 17

880

810

840

1000

OVERALL DIMENSIONS

Art. 80035 460

500 680

Art. 64024 - Art. 64025

(for Art. 64024) 280

310

Art. 64020 - Art. 64030 Art. 64021 - Art. 64031

Art. 66888

Art. 80040

Art. 66265

(for Art. 64025)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 251

PORTABLE GREASING KIT

251 251

for drums 20 - 30 kg

Trolley-mounted grease dispenser kit. The ideal combination for dispensing grease in any workplace. Compact in size, they enable easy changing of the container (drum or bucket) and quick greasing of any motor vehicle or mechanism. They are equipped with a grease follower plate that protects the lubricant while preserving its characteristics.

Art. 64021 (R 50:1 - 1500 g/min) Art. 64020 (R 50:1 - 1500 g/min) Art. 64031 (R 50:1 - 1500 g/min) Art. 64030 (R 50:1 - 1500 g/min)

Art. 64031 Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, with external ø 260 - 300 mm, comprising: Art. 62048 pump R 50:1 - 1500 g/min - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” 4 m - Art. 66599 kit carrying handle - Art. 66888 gun with single swivel joint - Art. 65310 drum cover ø 310 mm - Art. 66310 follower plate ø 310 mm No. 2 packing

m 3 0,025

ø from 260 to 300 mm ø from 240 to 280 mm

Art. 62041 (for Art. 64020 Art. 64021)

Art. 62048 (for Art. 64030 Art. 64031)

kg 11,4

Art. 66599

Art. 64030 Trolley-mounted grease dispenser for drums 20 - 30 kg, equipped like 64031 but ma without follower plate

Art. 66892 Art. 993.504

No. 2 packing

m 3 0,025

kg 9,1

Art. 64021 Trolley-mounted grease dispenser kit for drums 20 - 30 kg, with ext. ø 240 - 280 mm, comprising: Art. 62041 pump R 50:1 - 1500 g/min - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.504 hose 1/4” 4 m - Art. 66599kit carrying handle - Art. 66888 gun with single swivel joint - Art. 65280 drum cover ø 280 mm - Art. 66265 follower plate ø 265 mm No. 2 packing

m 3 0,030

Art. 65280 (for Art. 64020 Art. 64021)

Art. 65310 (for Art. 64030 Art. 64031)

kg 12

Art. 66265

Art. 64020

(for Art. 64021)

Trolley-mounted grease dispenser kit, for drums 20 - 30 kg, equipped like Art. 64021 but without follower plate No. 2 packing

m 3 0,030

kg 9,9

Art. 66310 Art.66888

(for Art. 64031)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

252 252

23-06-2006

15:15

Pagina 252

WALL-MOUNTED GREASE DISPENSING KIT for drums 50 - 60 kg with open hose reel

Grease dispensing systems with pump applied on drum, equipped with series 420 swivelling open hose reel. A complete solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones.

ø from 370 to 420 mm

Art. 64150 (R 50:1 - 1500 g/min) Art. 64151 (R 65:1 - 1900 g/min) Art. 64150 Wall-mounted grease dispenser kit with pump for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 8420.501 hose reel 1/4” - 12m nipple 1/4” x 3/8” G M/M - Art. 66892 - Art. 993.502 hose 1/4 ” - 1,5m - Art. 66889 gun with triple swivel joint - Art. 88630 drip-tray - Art. 65420 drum cover ø 420 mm - Art. 66400 follower plate ø 400 mm No. 4 packing

m 3 0,130

Art. 62074 (for Art. 64150)

Art. 63074 (for Art. 64151)

Art. 8420.501 By request the kit can be equipped with other hose reels (see page 378)

Art. 66892

kg 37,6

Art. 64151 Wall-mounted grease dispenser kit like Art. 64150 but with Art. 63074 pump R 65:1 - 1900 g/min m 3 0,130

kg 38,6

2200

OVERALL DIMENSIONS

900

No. 4 packing

Art. 88630 Art. 65420

Art. 66889

Art. 66400

Art. 993.502

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 253

253 253

WALL-MOUNTED GREASE KIT for drums 50 - 60 kg with enclosed hose reel

Grease dispensing systems with pump applied on drum, equipped with series 440 swivelling enclosed hose reel. A complete solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones.

ø from 370 to 420 mm

Art. 64155 (R 50:1 - 1500 g/min) Art. 64156 (R 65:1 - 1900 g/min) Art. 64155 Wall-mounted grease dispenser kit with pump for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 8440.501 hose reel 1/4” - 12m nipple 1/4” x 3/8” G M/M - Art. 66892 - Art. 993.502 hose 1/4 ” - 1,5m - Art. 66889 gun with triple swivel joint - Art. 88630 drip-tray - Art. 65420 drum cover ø 420 mm - Art. 66400 follower plate ø 400 mm No. 4 packing

m 3 0,140

Art. 62074 (for Art. 64155)

Art. 63074 (for Art. 64156)

Art. 8440.501 By request the kit can be equipped with other hose reels (see page 382)

Art. 66892

kg 42

Art. 64156 Wall-mounted grease dispenser kit like Art. 64150 but with Art. 63074 pump R 65:1 - 1900 g/min m 3 0,140

kg 43

2200

OVERALL DIMENSIONS

900

No. 4 packing

Art. 88630 Art. 65420

Art. 66889

Art. 66400

Art. 993.502

CATALOGO LIST 217 pag 231-260 GB ok per pdf

254 254

23-06-2006

15:15

Pagina 254

WALL-MOUNTED GREASE DISPENSING KIT

for drums 180 - 220 kg with open hose reel

Grease dispensing systems with pump applied on drum, equipped with series 420 swivelling open hose reel. A complete modular solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones.

ø from 550 to 600 mm

Art. 64200 (R 50:1 - 1500 g/min) Art. 64201 (R 65:1 - 1900 g/min) Art. 64200 Wall-mounted grease dispenser kit with pump for drums 180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 – 1500 g/min - Art. 8420.501 hose reel 1/4” - 12m - Art. 66892 nipple 1/4” x 3/8” G M/M - Art. 993.502 hose 1/4” - 1,5m - Art. 66889 gun with triple swivel joint - Art. 88630 drip-tray - Art. 65600 drum cover ø 600 mm follower plate ø 585 mm - Art. 66590 No. 4 packing

m 3 0,150

Art. 62095 (for Art. 64200)

Art. 63095 (for Art. 64201)

Art. 8420.501 By request the kit can be equipped with other hose reels (see page 378)

Art. 66892

kg 66,8

Art. 64201 Wall-mounted grease dispenser kit like Art. 64200 but with Art. 63095 pump R 65:1 - 1900 g/min m 3 0,150

kg 67,8

2200

OVERALL DIMENSIONS

900

No. 4 packing

Art. 88630 Art. 65600

Art. 66889

Art. 66590

Art. 993.502

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 255

255 255

WALL-MOUNTED GREASE DISPENSING KIT for drums 180 - 220 kg with enclosed hose reel

Grease dispensing systems with pump applied on drum, equipped with series 440 swivelling enclosed hose reel. A complete modular solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones.

ø from 550 to 600 mm

Art. 64210 (R 50:1 - 1500 g/min) Art. 64211 (R 65:1 - 1900 g/min) Art. 64210 Wall-mounted grease dispenser kit with pump for drums 180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 – 1500 g/min - Art. 8440.501 hose reel 1/4” - 12m - Art. 66892 nipple 1/4” x 3/8” G M/M - Art. 993.502 hose 1/4” - 1,5m - Art. 66889 gun with triple swivel joint - Art. 88630 drip-tray drum cover ø 600 mm - Art. 65600 follower plate ø 585 mm - Art. 66590 No. 4 packing

m 3 0,160

Art. 62095 (for Art. 64210)

Art. 63095 (for Art. 64211)

Art. 8440.501 By request the kit can be equipped with other hose reels (see page 382)

Art. 66892

kg 72

Art. 64211 Wall-mounted grease dispenser kit like Art. 64210 but with Art. 63095 pump R 65:1 - 1900 g/min m 3 0,160

kg 73

2200

OVERALL DIMENSIONS

900

No. 4 packing

Art. 88630 Art. 65600

Art. 66889

Art. 66590

Art. 993.502

CATALOGO LIST 217 pag 231-260 GB ok per pdf

256 256

23-06-2006

15:15

Pagina 256

GREASE DISPENSING KIT for drums 50 - 60 kg

Grease dispensing systems for use with drum. A complete solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones. Complete with accessories for connection to compressed air system and for delivery with grease guns.

ø from 370 to 420 mm

Art. 64145 (R 50:1 - 1500 g/min) Art. 64146 (R 65:1 - 1900 g/min) Art. 64147 (R 75:1 - 4400 g/min) Art. 64145 Grease dispenser kit with pump for drums 50 - 60 kg, with external ø 370 - 420 mm, comprising: Art. 62074 pump R 50:1 - 1500 g/min - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.202 hose 1/4” - 2 m - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65420 drum cover ø 420 mm - Art. 66400 follower plate ø 400 mm - Art. 37801 pressure regulator with manometer No. 2 packing

m 3 0,040

Art. 117F/751 (for Art. 64147) Art. 63074 (for Art. 64146) Art. 62074 (for Art. 64145) Art. 37801

kg 17

Art. 64146 Grease dispenser kit with pump for drums 50 - 60 kg, with ext. ø 370 - 420 mm, equipped like Art. 64145 but with: Art. 63074 pump R 65:1 - 1900 g/min No. 2 packing

m 3 0,040

Art. 993.202 Art. 66892

kg 18

Art. 64147 Grease dispenser kit with pump for drums 50 - 60 kg, with ext. ø 370 - 420 mm, comprising: Art. 117F/751 pump R 75:1 - 4400 g/min - Art. 66893 nipple 1/2” x 1/4”G M/M - Art. 993.202 hose 1/4” - 2 m - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 10/51 drum cover ø 420 mm - Art. 10/61 follower plate ø 400 mm - Art. 37814 pressure regulator with manometer No. 2 packing

m 3 0,090

kg 32

Art. 65420 (for Art. 64145) Art. 10/51 (for Art. 64147)

Art. 66888

Art. 993.504

Art. 66400 (for Art. 64145) Art. 10/61 (for Art. 64147)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 257

GREASE DISPENSING KIT

257 257

for drums 180 - 220 kg

Grease dispensing systems for use with barrel. A complete solution for delivering grease from an independent fixed station and with connection to a centralised system for dispensing from storage zones. Complete with accessories for connection to compressed air system and for delivery with grease guns.

ø from 550 to 600 mm

Art. 64195 (R 50:1 - 1500 g/min) Art. 64196 (R 65:1 - 1900 g/min) Art. 64147 (R 75:1 - 4400 g/min) Art. 64195 Grease dispenser kit with pump for drums 180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 62095 pump R 50:1 - 1500 g/min - Art. 66892 nipple 1/4” x 3/8”G M/M - Art. 993.202 hose 1/4” - 2 m - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 65600 drum cover ø 600 mm - Art. 66590 follower plate ø 585 mm - Art. 37801 pressure regulator with manometer No. 2 packing

m 3 0,060

Grease dispenser kit with pump for drums 180 - 220 kg, with ext. ø 550 - 600 mm, equipped like Art. 64195 but with: pump R 65:1 - 1900 g/min Art. 63095 m 3 0,060

Art. 63095 (for Art. 64196) Art. 62095 (for Art. 64195) Art. 37801

kg 23

Art. 64196

No. 2 packing

Art. 116F/751 (for Art. 64197)

Art. 993.202 Art. 66892

kg 24

Art. 64197 Grease dispenser kit with pump for drums 180 - 220 kg, with ext. ø 550 - 600 mm, comprising: Art. 116F/751 pump R 75:1 - 4400 g/min - Art. 66893 nipple 1/2” x 1/4”G M/M - Art. 993.202 hose 1/4” - 2 m - Art. 993.504 hose 1/4” - 4 m - Art. 66888 gun with single swivel joint - Art. 10/50 drum cover ø 600 mm follower plate ø 585 mm - Art. 10/60 pressure regulator with manometer - Art. 37814 No. 2 packing

m 3 0,110

kg 38

Art. 65600 (for Art. 64195) Art. 10/50 (for Art. 64197)

Art. 66888

Art. 993.504

Art. 66590 (for Art. 64195) Art. 10/60 (for Art. 64197)

CATALOGO LIST 217 pag 231-260 GB ok per pdf

258 258

23-06-2006

15:15

Pagina 258

ACCESSORIES FOR GREASE PUMPS FOLLOWER PLATE FOR PUMPS SERIES 600 - 700 WITH SUCTION TUBE Ø 30

Union ø 30

Art. 66265 Follower plate ø 265 mm (drums internal ø 240 - 260 mm)

Art. 66310 Follower plate ø 310 mm (drums internal ø 255 - 300 mm)

Art. 66340 Follower plate ø 340 mm (drums internal ø 300 - 330 mm)

Ø Follower plate

Art. 66265 Art. 66310 Art. 66340 FOLLOWER PLATE FOR PUMPS SERIES 600 - 700 WITH SUCTION TUBE Ø 30

Union ø 30

Art. 66370 Follower plate ø 370 mm (drums internal ø 335 - 360 mm)

Art. 66400 Follower plate ø 400 mm (drums internal ø 360 - 400 mm)

Art. 66590 Follower plate ø 585 mm (drums internal ø 540 - 580 mm)

Ø Follower plate

Art. 66370 Art. 66400 Art. 66590 FOLLOWER PLATE FOR PUMPS SERIES 900 WITH SUCTION TUBE Ø 45

Union ø 45

Art. 10/60 Follower plate ø 585 mm (drums internal ø 540 - 580 mm)

Art. 10/61 Follower plate ø 400 mm (drums internal ø 360 - 400 mm)

Art. 10/62 Follower plate ø 370 mm (drums internal ø 335 - 360 mm)

Ø Follower plate

Art. 10/60 Art. 10/61 Art. 10/62

CATALOGO LIST 217 pag 231-260 GB ok per pdf

23-06-2006

15:15

Pagina 259

259 259

FOLLOWER PLATE USE

Pump

Drum cover

Follower plate Vacuum created by pump sucking the grease

The atmospheric pressure at sea-level is 1 bar, equivalent to approx. 1 kg per cm2. When the pump sucks the grease from the container, a vacuum is created under the follower plate and, at the same time, depending on the width of its surface, a pressure 370 kg to 2000 kg is created above it. It should be pointed out that in this case, the weight created above the follower plate is: for follower plate ø 265 mm, approx. 370 kg; for follower plate ø 370 mm, approx. 750 kg; for follower plate ø 310 mm, approx. 500 kg; for follower plate ø 420 mm, approx. 1000 kg; for follower plate ø 340 mm, approx. 650 kg; for follower plate ø 585 mm, approx. 1900 kg.

without follower plate

with follower plate

The follower plate is always recommended but becomes indispensable when using particularly hard greases. The follower plate is pulled towards the bottom of the drum by the vacuum created by the pump and always ensures the following advantages: - it compresses the grease, preventing air pockets from forming and possible cavitation of the pump, - it keeps the grease clean, as well as preserving its characteristics, - it enables collection of all the grease from the bottom of the drum, that would otherwise remain stuck to the sides.

CATALOGO LIST 217 pag 231-260 GB ok per pdf

260 260

23-06-2006

15:15

Pagina 260

ACCESSORIES FOR GREASE PUMPS DRUM COVER FOR PUMPS SERIES 600 - 700 WITH SUCTION TUBE Ø 30

Union ø 30

Art. 65280

Drum cover ø 280 mm (drums external ø 240 - 280 mm)

Art. 65310

Drum cover ø 310 mm (drums external ø 260 - 300 mm)

Art. 65350

Drum cover ø 350 mm (drums external ø 300 - 350 mm)

Art. 65385 Art. 65280 Art. 65310 Art. 65350 Art. 65385 Art. 65420 Art. 65600

Drum cover ø 385 mm (drums external ø 340 - 385 mm)

Art. 65420

Drum cover ø 420 mm (drums external ø 370 - 420 mm)

Art. 65600

Drum cover ø 600 mm (drums external ø 550 - 600 mm)

DRUM COVER FOR PUMPS SERIES 900 WITH SUCTION TUBE Ø 45

Union ø 45

Art. 10/50 Drum cover ø 600 mm (drums external ø 550 - 600 mm)

Art. 10/51 Drum cover ø 420 mm (drums external ø 370 - 420 mm)

Art. 10/52 Drum cover ø 385 mm (drums external ø 340 - 385 mm)

Art. 10/50 Art. 10/51 Art. 10/52 DRUM COVER FOR MANUAL PUMPS WITH SUCTION TUBE Ø 25

Union

ø 25 Art. 65309

Drum cover ø 337 mm (drums external ø 270 - 330 mm) for Art. 60310 - 61310

Art. 65309 DRUM COVER FOR MANUAL PUMPS WITH SUCTION TUBE Ø 38

Union

ø 38 Art. 65311

Drum cover ø 337 mm (drums external ø 270 - 330 mm) for Art. 60410 - 61410

Art. 65311

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 261

ACCESSORIES FOR GREASE PUMPS Art. 10/82 Twin column industrial pump elevator with bedplate. It is suitable for drums 180 - 220 Kg for industrial pumps. No. 1 packing

m 3 1,448

kg 128

It allows to lift by air operated system and to let down by gravity the pump by means of side mounted 3-ways control valve (see page 327).

Art. 10/82 APPLICATIONS

For 200 Kg drums with twin column pump elevator and fluid press

For 200 Kg drums with twin column pump elevator

For 200 Kg drums with single column pump elevator

For 200 Kg drums, standard applications

261 261

CATALOGO LIST 217 pag 261-284 GB ok

262 262

23-06-2006

15:20

Pagina 262

ACCESSORIES FOR GREASE PUMPS Art. 66891

Nipple 1/4”G x 1/4”G M/M

Art. 66892

Nipple 1/4”G x 3/8”G M/M

Art. 66893

Nipple 1/4”G x 1/2”G M/M

Art. 66895

Nipple M 3/8”G x 1/4”NPT F

Art. 66896

Nipple M 1/4”G x 1/4”NPT F

Art. 66897

Nipple F 1/4”G x 1/4”NPT M

Art. 66891 Art. 66892 Art. 66893

Art. 66895 Art. 66896 Art. 66897 (*)

Art. 60450 Female quick connector complete with check valve - 1/4” G F max. pressure 350 bar

Art. 60450 (*)

Art. 60451 Male quick connector complete with check valve - 1/4” G F max. pressure 350 bar

Art. 60451 Art. 66661 Straight single swivel joint 1/4” G M/F supplied with grease guns Art. 66888 - Art. 66881

Art. 66661 Art. 66663 Triple swivel joint - 1/4” G M/F supplied with grease guns Art. 66889 - Art. 66882 - Art. 66899

Art. 66663 (*) Articles not manufactured by us

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 263

ACCESSORIES FOR GREASE PUMPS Art. 66739 4-jaw grease coupler with antisplash valve fitted standard on manual grease pumps

Art. 66739 Art. 66740

Art. 66740 Special 4-jaw grease coupler with antisplash valve fitted standard on all grease guns

Art. 66741 90° grease coupler

Art. 66741 Art. 66742 Hooking grease coupler

Art. 66742 Art. 66743 Push-on grease coupler

Art. 66743

Art. 993.201 Art. 993.202 Art. 993.502 Art. 993.504 Art. 993.512 Art. 993.518 Art. 995.701 Art. 995.702 Art. 995.710 Art. 995.715

Art. 993.201

Hose 1/4” M/F - 1 m - 20 bar

Art. 993.202

Hose 1/4” M/F - 2 m - 20 bar

Art. 993.502

Hose 1/4” F/F - 2 m - 600 bar

Art. 993.504

Hose 1/4” M/F - 4 m - 600 bar

Art. 993.512

Hose 1/4” M/F - 12 m - 600 bar

Art. 993.518

Hose 1/4” M/F - 18 m - 600 bar

Art. 995.701

Hose 3/8” M/F - 1 m - 600 bar

Art. 995.702

Hose 3/8” M/F - 2 m - 600 bar

Art. 995.710

Hose 3/8” M/F - 10 m - 600 bar

Art. 995.715

Hose 3/8” M/F - 15 m - 600 bar

Art. 66599 Handle for portable grease kit supplied with grease kits Art. 64020 Art. 64021 - Art. 64030 - Art. 64031

Art. 66599

263 263

CATALOGO LIST 217 pag 261-284 GB ok

264 264

23-06-2006

15:20

Pagina 264

ACCESSORIES FOR GREASE PUMPS Art. 37801 Pressure regulator with pressure gauge. - connections 1/4” G - M/F applied on a pump or on the tank of a suction/drainer, for regulating the compressed air inlet pressure.

Art. 37814

Art. 37801 Art. 37814

Pressure regulator with pressure gauge. - connections 1/2” G - M/F applied on a pump or on the tank of a suction/drainer, for regulating the compressed air inlet pressure.

Art. 37810 Pressure regulator with condensate discharge filter and pressure gauge. - connections 1/4 ” G - F/F for application at the start of the compressed air line feeding the pump.

Art. 37815

Art. 37810 Art. 37815

Pressure regulator with condensate discharge filter and pressure gauge. - connections 1/2 ” G - F/F for application at the start of the compressed air line feeding the pump.

Art. 37811 Air lubricator - connections 1/4” G - F/F its application guarantees better efficiency of the pump over time.

Art. 37816 Air lubricator - connections 1/2” G - F/F its application guarantees better efficiency of the pump over time.

Art. 37811 Art. 37816 Art. 37812 Pressure regulator with condensate discharge filter, air lubricator and pressure gauge - connections 1/4” G - F/F the system guarantees that the pump feed air is free of condensate

Art. 37817

Art. 37812 Art. 37817

Pressure regulator with condensate discharge filter, air lubricator and pressure gauge - connections 1/2” G - F/F the system guarantees that the pump feed air is free of condensate

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 265

265 265

GREASE DELIVERY HOSE REEL KIT open - enclosed for greasing Complete open and enclosed hose reel kits for delivering grease. They can be supplied with 1/4” or 3/8” hose. Application is by means of connection to a fixed system or directly to the air-operated dispensing pump.

for others hose reel see page 378 for others guns see page 266

Art. 64510 Art. 64512

Art. 64520 Art. 64522

Art. 88630

Art. 64510

Art. 88630

Delivery kit with open hose reel, complete with: - Art. 8420.501 hose reel - 12 m - 1/4” - 600 bar - Art. 66889 grease gun - Art. 88630 modular drip-tray

Modular drip-tray. Equipped with hook for gun and removable drip-tray. Applied under the hose reel, it is a handy holder for the delivery gun. Essential for a clean and orderly workplace.

No. 3 packing

m 3 0,110

kg 30

Art. 64512 Delivery kit with open hose reel, complete with: - Art. 8420.506 hose reel - 15 m - 3/8” - 600 bar - Art. 66889 grease gun modular drip-tray - Art. 88630 No. 3 packing

m 3 0,110

Art. 8440.501 (for Art. 64520)

Art. 8420.501 (for Art. 64510)

Art. 8440.506 (for Art. 64522)

Art. 8420.506 (for Art. 64512)

kg 35

Art. 64520 Delivery kit with enclosed hose reel, complete with: - Art. 8440.501 hose reel - 12 m - 1/4” - 600 bar - Art. 66889 grease gun modular drip-tray - Art. 88630 No. 3 packing

m 3 0,120

kg 35

Art. 64522 Delivery kit with enclosed hose reel, complete with: - Art. 8440.506 hoose reel - 15 m - 3/8” - 600 bar grease gun - Art. 66889 modular drip-tray - Art. 88630 No. 3 packing

m 3 0,120

kg 40

Art. 88630

Art. 66889

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

266 266

15:20

Pagina 266

ACCESSORIES FOR GREASE PUMPS Art. 66855 Grease gun valve - inlet 1/4” F

Art. 66855 Art. 66860 Grease gun with flexible terminal - inlet 1/4” F - special 4-jaw grease coupler

Art. 66860 Art. 66888 Grease gun with flexible terminal - inlet 1/4” F - Art. 66661 single swivel joint - special 4-jaw grease coupler

Art. 66888

standard equipment on grease kit

Art. 66889 Grease gun with flexible terminal - inlet 1/4” F - Art. 66663 triple swivel joint - special 4-jaw grease coupler

Art. 66889 Art. 66899

(*) (*)

Grease gun with digital gram-counter and flexible terminal - inlet 1/4” F - Art. 66663 triple swivel joint - special 4-jaw grease coupler

Art. 66899 (*) Not type-approved for public use (*) Articles not manufactured by us

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 267

ACCESSORIES FOR GREASE PUMPS Art. 66880 Grease gun with rigid terminal - inlet 1/4” F - with special 4-jaw grease coupler

Art. 66880 Art. 66881 Grease gun with rigid terminal - inlet 1/4” F - Art. 66661 single swivel joint - with special 4-jaw grease coupler

Art. 66881 Art. 66882 Grease gun with rigid terminal - inlet 1/4” F - Art. 66663 triple swivel joint - with special 4-jaw grease coupler

Art. 66882 Art. 66856 Flexible terminal with special 4-jaw grease coupler

Art. 66856 Art. 66857 Rigid terminal with special 4-jaw grease coupler

Art. 66857

267 267

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 268

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 269

TROLLEYS AND SERVICE COLUMNS

TROLLEYS FOR CONTAINERS 20 - 220 kg

269 269

110 page 270

TWO-SIDED SERVICE COLUMNS 4 - 6 HOSE REELS

page

272

TWO-SIDED SERVICE COLUMNS 4 - 8 HOSE REELS

page

274

FRONTAL SERVICE COLUMNS 4 - 6 HOSE REELS

page

276

FRONTAL SERVICE COLUMNS 1 - 2 HOSE REELS

page

278

FRONTAL SERVICE COLUMNS WITH CONTAINMENT TANKS

page

280 8

CONTAINMENT TANKS

page

282

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

270 270

15:20

Pagina 270

MODULAR TROLLEYS for drum 20 - 60 Kg

Modular trolleys, entirely galvanised, suitable for handling 20 - 60 kg drums. Equipped with 2 very smooth wheels that make them extremely easy to handle. Their compact size ensures perfect integration in the workplace and their modularity enables compact packing for easy storage.

Art. 80035 Trolley for drums 20 - 60 Kg. No. 1 packing

m 3 0,010

kg 5

455

I052

Art. 80035

K C102

K C389 KR8002

KR8001

Modular trolley with compact packing dimensions

K C202 K C203

Art. 80040 Trolley for drums 20 - 60 Kg. m 3 0,010

kg 6

400

No. 1 packing

11 0

0 KC089

Modular trolley with compact packing dimensions

Art. 80040

KR8002

KC203

KR8001

for drum 20 - 60 Kg

Modular trolley, entirely galvanised, suitable for handling 20 - 60 kg containers. Equipped with 2 fixed wheels and 2 castors, it is very easy to handle. Its modularity enables compact packing for easy storage.

Art. 80050 Trolley for containers 20 - 60 Kg. No. 1 packing

m 3 0,020

kg 9,2

I052

485

KR8003 KC261

KC066

KC092

Art. 80050

Modular trolley with compact packing dimensions

KR2202 KR8004

KC174

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 271

271 271

MODULAR TROLLEYS for drum 180 - 220 Kg

Modular trolleys, entirely galvanised, for 180 - 220 kg drums. Equipped with 2 fixed wheels and 2 castors. and a drum clamping device and adjustable side support for hooking the gun and hose or other accessories. Their modularity offers compact packing for easy storage.

Art. 80200 Standard trolley for drums 180 - 220 Kg. No. 1 packing

m 3 0,060

kg 21,9

KR8005 KC044

810

KC074

KC051

KC056

KC051

Modular trolley with compact packing dimensions

Art. 80200

KC175

KR4614

KR8006

Art. 80201 Super trolley for drums 180 - 220 Kg. Arranged for application of one of our hose reels No. 1 packing

m 3 0,100

kg 44

KR8008

KC050 KC054

150

KC055

KC044

KC051 KC056

KC053

F096 S003

KC052

KC051

A417

Modular trolley with compact packing dimensions

Art. 80201

KR8007 S009

KC176 A417

Art. 80201

Art. 80035 - Art. 80040 Designed to complete our articles such as oil and grease kits.

OVERALL DIMENSIONS

Article

80035 80040 80050 80200 80201

460 460 510 770 850

1000 1000 1000 830 950

500 - 680 500 - 680 640 700 920

CATALOGO LIST 217 pag 261-284 GB ok

272 272

23-06-2006

15:20

Pagina 272

SERVICE COLUMNS

Art. 39317

Two-sided service columns, usable from both sides for access. Ideal service stations for rationalising the areas dedicated to delivery. Installable anywhere in the workplace, connected to the centralised distribution system, they are real independent operational stations. Made from top quality materials, with scratchproof painting. All are fitted with full width drip trays.

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:53

Pagina 273

273 273

TWO-SIDED SERVICES COLUMNS for 4 hose reels

for 6 hose reels

2 hose reels series 260

Art. 39317 Art. 39314 The upper part (ceiling) is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves for stopping the fluid. The inner sides have holes for the application of hose reels (series 260). The outer sides are arranged for the application of monitoring for computerised management.

Art. 39314 Two-sided service column for 4 hose reels No. 1 packing

m 3 0,673

kg 269

Art. 39317 Universal drillings for application of accessories

Two-sided service column for 6 hose reels No. 1 packing

m 3 0,764

kg 312

OVERALL DIMENSIONS

2640

Monitoring

600

1290

Art. 39314

600

1770

Art. 39317

Drip-tray

CATALOGO LIST 217 pag 261-284 GB ok

274 274

23-06-2006

15:20

Pagina 274

SERVICE COLUMNS

Art. 39328

Single post service columns, usable from both sides for access. Installable anywhere in the workplace, connected to the centralised distribution system, they are real independent operational stations. Made from top quality materials, with scratchproof painting, and full width drip trays.

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:54

Pagina 275

275 275

SINGLE POST SERVICE COLUMNS for 4 hose reels

for 8 hose reels

2 hose reels series 260

Art. 39328 Art. 39324 The upper part (ceiling) is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves for stopping the fluid. The inner side has holes for the application of hose reels series 260. Monitoring can be fitted on the front face for computerised management of fluids.

Art. 39324 Two-sided service column for 4 hose reels No. 1 packing

m 3 0,617

kg 224

Art. 39328 Universal drillings for application of accessories

Two-sided service column for 8 hose reels No. 1 packing

m 3 0,617

kg 270

OVERALL DIMENSIONS 505

1452

505

2503

Art. 39324

2685

Monitoring

Art. 39328

Drip-tray

CATALOGO LIST 217 pag 261-284 GB ok

276 276

23-06-2006

15:20

Pagina 276

SERVICE COLUMNS

Art. 39307

Service stand. Ideal service stations for rationalising the areas dedicated to delivery. Installable on walls or near the workplace, connected to the centralised distribution system, they are real independent operational stations. Made from top quality materials, and full width drip trays.

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 277

277 277

SERVICES STANDS for 4 hose reels

for 6 hose reels

Art. 39307 Art. 39304 The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves for stopping the fluid. They are also equipped with delivery gun hose hooks.

Art. 39304 Service stand for 4 hose reels No. 1 packing

m 3 0,505

kg 129

Art. 39307 Service stand for 6 hose reels No. 1 packing

m 3 0,505

Universal drillings for application of accessories

kg 157

OVERALL DIMENSIONS 1070

485

1550

485

Art. 39304

2340

Delivery gun - hose hook

Art. 39307

Drip-tray

CATALOGO LIST 217 pag 261-284 GB ok

278 278

23-06-2006

15:20

Pagina 278

SERVICE COLUMNS

Art. 39322

Single post service columns. Ideal service stations for rationalising the areas dedicated to delivery. Installable on walls, connected to the centralised distribution system, they are real independent operational stations. Made from top quality materials, with scratchproof painting.

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:55

Pagina 279

SINGLE POST SERVICE COLUMNS

279 279

for 2 hose reel

for 1 hose reel

Art. 39321

Art. 39322

The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves for stopping the fluid. The drip-tray can be applied frontally.

Art. 39321 Single post service column for 1 hose reel No. 1 packing

m 3 0,114

kg 47

Art. 39322 Single post service column for 2 hose reels No. 1 packing

m 3 0,156

Universal drillings for application of accessories

kg 61

OVERALL DIMENSIONS 620

128

2448

125

2445

290

Art. 39321

Art. 39322

Holes for drip tray

CATALOGO LIST 217 pag 261-284 GB ok

280 280

23-06-2006

15:20

Pagina 280

SERVICE STAND

Art. 39352

Service stand with containment tank. Ideal service stations for rationalising the areas dedicated to delivery. Able to collect any leaks or accidental spills, by means of the containment tanks, in compliance with the new regulations. Installable on walls, they are real independent operational stations. Made from top quality materials, with scratchproof painting.

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 281

281 281

WITH CONTAINMENT TANK for 2 hose reel plus 1 drum

for 3 hose reel plus 2 drum

Art. 39352 Art. 39351 The upper part of the support is arranged with holes for the application of hose reels series 390 - 430 - 450 - 530 and solenoid valves for stopping the fluid. A pump for suction and a drip-tray can be applied on the drilled central support.

Art. 39351 Service stand for 2 hose reels with containment tank for 1 drum 180 - 220 kg m 3 0,910

No. 2 packing

kg 210

Art. 39352 Service stand for 3 hose reels with containment tank for 2 drums 180 - 220 kg m 3 1,060

No. 2 packing

Universal drillings for application of accessories

kg 245

OVERALL DIMENSIONS 1100

895

1450

Art. 39351

2600

Holes for application of alternative pump

Art. 39352

Holes for drip-tray

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

282 282

15:58

Pagina 282

CONTAINMENT TANKS

Containment tanks. Excellent solutions for clean storage of drums. Able to collect any leaks or accidental spills, in compliance with the current regulations. Made from top quality materials, with scratchproof painting.

Art. 39902

Art. 39901

Sump capacity is at least 1/3 of the total volume stored or not less than the biggest barrel, whichever is the greater

Containment tank for 1 drum 180 - 220 kg No. 1 packing

m 3 0,417

kg 87

Art. 39902 Containment tank for 2 drums 180 - 220 kg No. 1 packing

m 3 0,560

kg 115

OVERALL DIMENSIONS 1000

350

830

Art. 39901 830 350

1350

Art. 39902

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 283

CATALOGO LIST 217 pag 261-284 GB ok

23-06-2006

15:20

Pagina 284

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

Pagina 285

INDUSTRIAL PUMPS

285 285

CHOOSING A PUMP

page

286

PUMPS FOR OILS AND ALLIED PRODUCTS

page

301

GREASE PUMPS

page

309

HIGH CAPACITY GREASE PUMPS

page

312

CAPACITY PUMPS FOR OIL AND ALLIED PRODUCTS

page

314

AISI 304 STAINLESS STEEL PUMPS

page

320

ACCESSORIES

page

322 9

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

286 286

15:44

Pagina 286

INDUSTRIAL PUMPS Series 900

Series 1200

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

Pagina 287

FOUR LARGE FAMILIES Series 1500

Series 1800

287 287

CATALOGO LIST 217 pag 285-330 GB ok

288 288

23-06-2006

15:44

Pagina 288

TOTAL QUALITY Innovative design for optimising the pump work cycle. The result of years of research and development, during which numerous tests were carried out for thousands of work hours.

High quality materials used, cutting-edge processes, hardening and grinding for reducing internal friction and limiting wear.

Fewer moving parts for easy and occasional maintenance with savings in running costs

The industrial pumps guarantee high efficiency in capacity and operating pressure.

Double action ensures a continuous and constant flow of the fluid delivered.

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

Pagina 289

VERSATILITY

289 289

INTEGRAL INDUSTRIAL PUMPS Air motor and pumping unit form a single body. They are recommended for transferring non-corrosive fluids, oil and allied products.

FLANGED INDUSTRIAL PUMPS Air motor and pumping unit form a single body. They are recommended for transferring non-corrosive fluids, oil and allied products.The motor base is flanged to enable application of the handles which are useful for easy moving and for simple fixing in various other applications.

DIVORCED INDUSTRIAL PUMPS Air motor and pumping unit are separate so that the fluid cannot come into direct contact with the motor body. They are recommended for transferring non-aggressive industrial and chemical fluids. The motor base is flanged to enable application of the handles which are useful for easy moving and for simple fixing in various other applications.

The integral pumps and flanged pumps are available in the drum version and modular version (modular = extendable with a rigid suction tube, or in the wall application with a flexible suction tube)

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

290 290

Pagina 290

CHOOSING A PUMP

RAASM has produced a wide range of industrial pumps to meet the most complex requirements for the various sectors of use, such as: industry, building, mining, shipyards, etc. In this wide array there is certainly the pump suitable for your application. To choose a pump it is essential to appraise the following basic factors: - type of fluid and its viscosity - quantity to be delivered - distance between feed pump and delivery point - pressure for type of use Guide table for choosing the pump suitable for your needs For other needs see page 152

Pump series Compression ration Capacity Low-viscosity fluids such as: various low-viscosity oils (SAE 15/20) hydraulic fluid, diesel oil and allied products, etc.

Medium-viscosity fluids such as: motor oil, gearbox oil (SAE 15/140) etc.

High-viscosity fluids such as: motor oil, gearbox oil (SAE 240) etc.

1/2” - 1” 1:1 60 - 160 l/min

900 5:1 45 l/min

900 7:1 30 l/min

900 11:1 30 l/min

medium distances NBR seals

medium/long distances PU seals

short distances NBR seals

medium/long distances PU seals

medium distances PU seals

medium/long distances PU seals

Medium and high-viscosity greases

short distance transfer PU seals

Industrial liquids, inks, paints

if compatible with PU seals

Aggressive chemical fluids

page 156

page 301

page 302

page 304

For other technical data see the pages indicated

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

Pagina 291

291 291

SUITABLE FOR YOUR NEEDS

1200 18:1 23 l/min up to very long distances PU seals

up to very long distances PU seals

900 45:1 4400 g/min

900 5:1 45 l/min

1200 9:1 42 l/min

900 2:1 95 l/min

1500 4:1 110 l/min

medium/long distances Teflon seals

medium/long distances Teflon seals s/steel suction tube

medium/long distances PU seals

medium/long distances Teflon seals

medium/long distances Teflon seals s/steel suction tube

short/medium distances PU seals

medium/long distances PU seals

medium/long distances Teflon seals s/steel suction tube

short distances PU seals

medium/long distances PU seals

1200 1200 40:1 75:1 4400 g/min 10000 g/min

up to very long distances PU seals

medium/long distances Teflon seals

short distance transfer PU seals

medium/long distances PU seals

high-pressure transfer or high delivery long distances PU seals

if compatible with PU seals

medium/long distances Teflon seals

medium/long distances Teflon seals s/steel suction tube

medium/long distances PU seals

page 314

page 316

medium/long distances Teflon seals s/steel suction tube

page 308

page 309

page 311

page 312

page 301

page 321

CATALOGO LIST 217 pag 285-330 GB ok

292 292

23-06-2006

15:44

Pagina 292

EXAMPLES OF INDUSTRIAL PUMP APPLICATIONS Stations for continuous feed of machinery by means of distribution of fluids in line (lubricants, inks, adhesives, etc.) with pump connected to the tank or fixed to the floor with bracket

Automated system for the delivery of preselected quantities of fluids (inks, paints, greases, etc.), fed by pumps mounted on drum, with lift

Application of sealants, adhesives, greases, etc., by means of special delivery gun fed by pump mounted on drum in fixed or mobile station

Fluid distribution system (for paints, lubricants, protective liquids, etc.) fed by pump mounted on drum in fixed station and delivery with spray gun.

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:44

Pagina 293

FLUID COMPATIBILITY TABLE Type of fluid

293 293 Seals

Metal parts Carbon steel

AISI 304 s/steel

Acetone

YES

Acetylene

YES

Antifreeze (glycol solution)

YES

ATF oils

Teflon

Viton

NBR

YES

Benzene

YES

Bitumen

YES

Bleaching solutions

YES

Brake fluids

YES

Citric acid

YES

Cutting oils

YES

Detergent (water solution)

YES

Diesel oil

YES

Ethyl alcohol

YES

Gasoline

YES

Glues

YES

Grease and silicone oils

YES

Kerosene

YES

Lakes

YES

Methyl alcohol (ethanol)

YES

Minerals oils

YES

Paint (water solutions)

YES

Paint (xylene solutions)

YES

Resin

YES

Sewage

YES

Syntetic detergent

YES

Toluene (toluol)

YES

Vegetable oils

YES

Water

YES

Aluminium Polyurethane

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

294 294

15:44

Pagina 294

INDUSTRIAL PUMP INSTALLATIONS

For tank with pump in vertical position mounted on bracket

For tank with pump in vertical position mounted on floor with bracket

For tank with pump in horizontal position

For tank with pump in inclined position

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:46

Pagina 295

295 295

For 200 kg drum, with double ram hoist and follower

For 200 kg drums, with single-acting hoist

For 200 kg drums, with single-acting single-arm hoist

For 200 kg drums, standard application

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:46

Pagina 296

MINING SPECIALISTS

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:46

Pagina 297

CATALOGO LIST 217 pag 285-330 GB ok

298 298

23-06-2006

15:49

Pagina 298

INDUSTRIAL PUMP INSTALLATIONS

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:49

Pagina 299

299 299

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:49

Pagina 300

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:49

Pagina 301

PUMPS FOR OIL AND SIMILAR Ratio 5:1 Capacity 45 l/min

Series 900

301 301

INTEGRAL

FLANGED

DIVORCED

90C/51

90F/51

90D/51

Compatible fluids

oils, lubricants and allied products

chemical and industrial fluids

Type of seals

Series 900 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, also high-viscosity. The divorced version, with teflon seals, can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

36 (522)

24 (348)

16 (232)

1,8 1,3

1,0

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 0 l/min 11,25 22,50 33,75 45,00 (gpm) (3,0) (5,9) (9,0) (11,9)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

polyurethane/PU

teflon

Suction tube upper body

aluminium

carbon steel

Suction tube

carbon steel

F 1/2”

Air inlet connection Fluid outlet connection

F 3/4”

Suction tube length

modular (F 1”)

Suction tube diameter

ø 62

1,6 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,040

No. 1 packing m 3 0,045

kg 12

kg 13

kg 14,5

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:49

Pagina 302

PUMPS FOR OIL AND SIMILAR

302 302 Ratio 7:1 Capacity 30 l/min

INTEGRAL

90C/71

91C/71

Compatible fluids

oils, lubricants and allied products

Type of seals

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

A A B

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

polyurethane/PU

Suction tube upper body

aluminium

Suction tube

carbon steel

F 1/2”

Air inlet connection

F 3/4”

Suction tube length

modular (F 1”)

940 mm

Suction tube diameter

ø 53

1,6 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,040

No. 1 packing m 3 0,070

kg 11

kg 13

Fluid outlet connection

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 303

Series 900

303 303

INTEGRAL

FLANGED

DIVORCED

92C/71

90F/71

91F/71

90D/71

oils, lubricants and allied products

chemical and industrial fluids

polyurethane/PU

teflon

aluminium

carbon steel

F 1/2”

F 3/4”

1260 mm

modular (F 1”)

940 mm

modular (F 1”)

ø 53

1,6 m3/min

80 dB

8 bar

No. 1 packing m 3 0,080

No. 1 packing m 3 0,040

No. 1 packing m 3 0,070

No. 1 packing m 3 0,045

kg 15

kg 12

kg 14

kg 13,5

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 304

PUMPS FOR OIL AND SIMILAR

304 304 Ratio 11:1 Capacity 30 l/min

INTEGRAL

90C/111

91C/111

Compatible fluids

oils, lubricants and greases

Type of seals

Series 900 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, also high-viscosity. Ideal for transferring medium/high viscosity greases. The divorced version, with teflon seals, can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions. B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

195

130

260

82 (1189)

58 (841)

1,9 1,4 1,0

36 (522)

0 l/min (gpm)

C C

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 7,5 (2,0)

15 (4,1)

22,5 30,00 (6,1) (8,2)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

polyurethane/PU

Suction tube upper body

aluminium

Suction tube

carbon steel

F 1/2”

Air inlet connection

F 3/4”

Suction tube length

modular (F 1”)

940 mm

Suction tube diameter

ø 45

1,7 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,040

No. 1 packing m 3 0,070

kg 11

kg 16

Fluid outlet connection

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 305

Series 900

305 305

INTEGRAL

FLANGED

DIVORCED

92C/111

90F/111

91F/111

90D/111

oils, lubricants and greases

chemical and industrial fluids

polyurethane/PU

teflon

aluminium

carbon steel

F 1/2”

F 3/4”

740 mm

480 mm

940 mm

modular (F 1”)

ø 45

1,7 m3/min

80 dB

8 bar

No. 1 packing m 3 0,070

No. 1 packing m 3 0,045

No. 1 packing m 3 0,070

No. 1 packing m 3 0,045

kg 15

kg 13

kg 17

kg 13

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 306

PUMPS FOR OIL AND SIMILAR Series 1200

306 306

Ratio 9:1 Capacity 45 l/min

FLANGED

DIVORCED

115F/91

115D/91

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

teflon

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”

Suction tube length

modular (F 1”)

Suction tube diameter

ø 62

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,040

No. 1 packing m 3 0,045

kg 14

kg 15,5

Series 1200 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, also high-viscosity. The divorced version, with teflon seals, can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

62 (899)

47 (674)

30 (435)

3,2 2,4 1,7

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 0 l/min 11,25 22,50 33,75 45,00 (gpm) (3,0) (5,9) (9,0) (11,9)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 307

PUMPS FOR OIL AND SIMILAR Series 1200 Ratio 12:1 Capacity 30 l/min

FLANGED

307 307

FLANGED

DIVORCED

115F/121

116F/121

115D/121

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluid

Type of seals

polyurethane/PU

teflon

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”

Suction tube length

modular (F 1”)

940 mm

modular (F 1”)

Suction tube diameter

ø 53

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,040

No. 1 packing m 3 0,070

No. 1 packing m 3 0,045

kg 13

kg 15

kg 14,5

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

(58 psi)

cycles/min

(m3/min)

88 (1276)

66 (957)

42 (609)

C 4 bar

(87 psi)

(116 psi)

100

150

200 3,2 A

2,4 B

1,7 C

AIR CONSUMPTION

A 8 bar

0 0 l/min 12,00 18,00 24,00 30,00 (gpm) (3,2) (4,8) (6,3) (7,9)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 308

PUMPS FOR OIL AND SIMILAR Series 1200

308 308

Ratio 18:1 Capacity 23 l/min

FLANGED

DIVORCED

115F/181

116F/181

115D/181

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

teflon

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”

Suction tube length

480 mm

940 mm

modular (F 1”)

Suction tube diameter

ø 45

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,045

No. 1 packing m 3 0,070

No. 1 packing m 3 0,045

kg 15,5

kg 18

kg 14

Series 1200 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, also high-viscosity. Ideal for the transfer of medium/high-viscosity grease. The divorced version, with teflon seals, can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

142 (2059)

102 (1479)

65 (943)

0 l/min (gpm)

5,75 11,50 17,25 23,00 (1,5) (3,0) (4,6) (6,1)

3,2 2,4

1,7

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 309

GREASE PUMPS Ratio 45:1 Capacity 4400 g/min

Series 900

309 309

FLANGED

90F/451

91F/451

92F/451

high viscosity oils and greases

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

F 1/2”

Series 900 industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of medium/high-viscosity oils and greases. The high quality of the components ensures lasting and reliable operation even in extreme conditions whereas the double action guarantees the delivery of a continuous and constant flow. Particularly effective in systems equipped with several dispensing points.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

330 (4785)

150 (3625)

100

150

200 A

170 (2465)

0 g/min (lbspm)

1100 2200 3300 4400 (2,42) (4,84) (7,26) (9,68)

1,8 1,3 1,0

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

KIND OF FLUID: grease NLGI 1 - 20 °C

Article Compatible fluids Type of seals

Air inlet connection Fluid outlet connection

F 1/2”

Suction tube length

500 mm

940 mm

740 mm

Suction tube diameter

ø 45

1,6 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,045

No. 1 packing m 3 0,070

kg 16

kg 19

kg 18

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 310

GREASE PUMPS

310 310 Ratio 70:1 Capacity 3000 g/min

Series 900 INTEGRAL

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

510 (7395)

370 (5365)

240 (3480)

1,8 1,3 1,0

0 g/min 750 (lbspm) (1,65)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 1500 2250 (3,3) (4,95)

3000 (6,6)

KIND OF FLUID: grease NLGI 1 - 20 °C

Article

91C/701

Compatible fluids

high viscosity oils and greases

Type of seals

polyurethane/PU

Suction tube upper body

aluminium

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1/2”

Suction tube length

940 mm

Suction tube diameter

ø 45

Max. air consumption 8 bar

1,6 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar No. 1 packing m 3 0,070 kg 19

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 311

GREASE PUMPS Ratio 75:1 Capacity 4400 g/min

Series 1200

311 311

FLANGED

115F/751

116F/751

117F/751

Compatible fluids

high viscosity oils and greases

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1/2”

Suction tube length

500 mm

940 mm

740 mm

Suction tube diameter

ø 45

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,045

No. 1 packing m 3 0,070

kg 18

kg 21

kg 20

Series 1200 industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of medium/high-viscosity oils and greases. The high quality of the components ensures lasting and reliable operation even in extreme conditions whereas the double action guarantees the delivery of a continuous and constant flow. Particularly effective in systems equipped with several dispensing points.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

100

150

200

550 (7975)

410 (5945)

280 (4060)

3,2 2,4 1,7

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 0 g/min 1100 2200 3300 4400 (lbspm) (2,42) (4,84) (7,26) (9,68) KIND OF FLUID: grease NLGI 1 - 20 °C

Article

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 312

GREASE PUMPS

312 312 Ratio 40:1 Capacity 10000 g/min

FLANGED

Series 1200 FLANGED

FLANGED

115F/401

116F/401

117F/401

Compatible fluids

high viscosity oils and greases

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1/2”

Suction tube length

740 mm

940 mm

860 mm

Suction tube diameter

ø 50,8 (2”)

Max. air consumption 8 bar

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,090

kg 19

kg 23

kg 21

Series 1200 industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of medium/high-viscosity oils and greases, they guarantee high performance in capacity (g/min) and operating pressure. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

A 8 bar

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

130

195

260 4,6

320 (4640)

260 (3480)

160 (2320)

3,6 2,7

0 g/min 2250 (lbspm) (5,0)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

C 4 bar

(116 psi)

0 4500 6750 9000 (9,9) (14,9) (19,8)

KIND OF FLUID: grease NLGI 2 - 20 °C

Article

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 313

GREASE PUMPS Ratio 70:1 Capacity 7000 g/min

Series 1500

313 313

FLANGED

151F/701

152F/701

Compatible fluids

high viscosity oils and greases

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1/2”

Suction tube length

940 mm

860 mm

Suction tube diameter

ø 50,8 (2”)

Max. air consumption 8 bar

4,3 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,20

kg 43

kg 41

Series 1500 industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of medium/high-viscosity oils and greases, they guarantee high performance in capacity (g/min) and operating pressure. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

C 4 bar

(116 psi)

(87 psi)

(58 psi)

bar (psi)

cycles/min

(m3/min)

560 (8120)

120

160 5,0

420 (6090)

280 (4060)

4,0 3,0

0 g/min 1750 (lbspm) (3,9)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

A 8 bar

0 3500 5250 7000 (7,7) (11,6) (15,4)

KIND OF FLUID: grease NLGI 2 - 20 °C

Article

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 314

PUMPS FOR OIL AND SIMILAR

314 314

Ratio 2:1 Capacity 95 l/min

Series 900

DIVORCED

90D/21

90DV/21

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

Viton

Suction tube upper body

carbon steel

Suction tube

carbon steel

Series 900 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The version with viton seals can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(58 psi)

cycles/min

(m3/min)

(116 psi)

AIR CONSUMPTION

A 8 bar

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Air inlet connection

F 1/2”

Fluid outlet connection

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 100

1,6 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,20

kg 45

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 315

PUMPS FOR OIL AND SIMILAR Series 1200 Ratio 3:1 Capacity 100 l/min

DIVORCED

115D/31

115DV/31

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

Viton

Suction tube upper body

carbon steel

Suction tube

carbon steel

Series 1200 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The version with viton seals can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(58 psi)

cycles/min

(m3/min)

(116 psi)

A B

B C

AIR CONSUMPTION

A 8 bar

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Air inlet connection

F 1/2”

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 100

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,20

kg 46

Fluid outlet connection

Max. air consumption 8 bar

315 315

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 316

PUMPS FOR OIL AND SIMILAR Series 1500

316 316

Ratio 4:1 Capacity 110 l/min

DIVORCED

Series 1500 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(58 psi)

cycles/min

(m3/min)

(116 psi)

120 4,4

32 (464)

24 (348)

16 (232)

3,5

0 l/min (gpm)

2,6

AIR CONSUMPTION

A 8 bar

0 56 84 112 28 (7,4) (14,8) (22,2) (29,6)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

150D/41

Compatible fluids

oil, lubricants and allied products

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 120

Max. air consumption 8 bar

3,4 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar No. 1 packing m 3 0,20 kg 63

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 317

PUMPS FOR OIL AND SIMILAR Series 1500 Ratio 6:1 Capacity 80 l/min

317 317

DIVORCED

150D/61

150DV/61

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

Viton

Suction tube upper body

carbon steel

Suction tube

carbon steel

Series 1500 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The version with viton seals can also be used for the transfer of industrial and chemical fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions. B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

FLUID OUTLET PRESSURE

30 48 (696) 36 (522) 24 (348)

120 4,4

3,5

C C

0 l/min (gpm)

2,6

AIR CONSUMPTION

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 40 60 80 20 (5,3) (10,6) (15,9) (21,1)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Air inlet connection

F 1/2”

Fluid outlet connection

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 100

3,4 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,20

kg 53

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 318

PUMPS FOR OIL AND SIMILAR Series 1800

318 318

Ratio 5:1 Capacity 90 l/min

DIVORCED

Series 1800 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

A 8 bar

(58 psi)

cycles/min

(m3/min)

40 (580) 30 (435)

5,5 A

4,4

20 (290)

120

3,3 C

0 l/min (gpm)

AIR CONSUMPTION

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(116 psi)

0 56 84 112 28 (7,4) (14,8) (22,2) (29,6)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

180D/51

Compatible fluids

oil, lubricants and allied products

Type of seals

polyurethane/PU

Suction tube upper body

carbon steel

Suction tube

carbon steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 120

Max. air consumption 8 bar

4,2 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar No. 1 packing m 3 0,20 kg 65

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 319

PUMPS FOR OIL AND SIMILAR Series 1800 Ratio 8:1 Capacity 65 l/min

319 319

DIVORCED

180D/81

180DV/81

Compatible fluids

oil, lubricants and allied products

chemical and industrial fluids

Type of seals

polyurethane/PU

Viton

Suction tube upper body

carbon steel

Suction tube

carbon steel

Series 1800 industrial air-operated pumps for medium-long distance distribution. Suitable for transferring oils, lubricants and allied products, they guarantee high performance in capacity (l/min) and operating pressure. The version with viton seals can also be used for the transfer of industrial fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions.

B 6 bar

A 8 bar

bar (psi)

(58 psi)

cycles/min

(m3/min)

64 (928) A

120 5,5 A

48 (696) B B

32 (464) C

0 l/min (gpm)

4,4 3,3

AIR CONSUMPTION

FLUID OUTLET PRESSURE

C 4 bar

(87 psi)

(116 psi)

0 40 60 80 20 (5,3) (10,6) (15,9) (21,1)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article

Air inlet connection

F 1/2”

Fluid outlet connection

F 1.1/2”

Suction tube length

modular (F 2”)

Suction tube diameter

ø 100

4,2 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar

No. 1 packing m 3 0,20

kg 56

Max. air consumption 8 bar

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

16:11

Pagina 320

AISI 304 S/STEEL PUMPS

320 320

Ratio 6:1 Capacity 42 l/min

Series 900

DIVORCED

Series 900 stainless steel industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of chemical and industrial fluids. The high quality of the components ensures lasting and reliable operation even in extreme conditions whereas the double action guarantees the delivery of a continuous and constant flow. Particularly effective in systems equipped with several dispensing points.

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

C 4 bar

(87 psi)

(58 psi)

cycles/min

(m3/min)

(116 psi)

100

150

200

41 (595)

30 (435)

20 (290)

1,8 1,3 1,0

AIR CONSUMPTION

A 8 bar

0 0 l/min 10,25 21,00 32,50 42,00 (gpm) (2,7) (5,5) (8,6) (11,1)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article Compatible fluids Type of seals

95D/61 chemical and industrial fluids teflon

Suction tube upper body

AISI 304 stainless steel

Suction tube

AISI 304 stainless steel

Air inlet connection Fluid outlet connection

F 1/2” F 3/4”

Suction tube length

modular (F 1”)

Suction tube diameter

ø 60

Max. air consumption 8 bar Noise level Air max. feed pressure

1,6 m3/min

80 dB 8 bar No. 1 packing m 3 0,045 kg 14,5

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 321

AISI 304 S/STEEL PUMPS Series 1200 Ratio 9:1 Capacity 42 l/min

DIVORCED

Series 1200 stainless steel industrial air-operated pumps for medium-long distance distribution. Suitable for the transfer of chemical and industrial fluids. The high quality of the components ensures lasting and reliable operationeven in extreme conditions whereas the double action guarantees the delivery of a continuous and constant flow. Particularly effective in systems equipped with several dispensing points.

B 6 bar

FLUID OUTLET PRESSURE

bar (psi)

(58 psi)

cycles/min

(m3/min)

67 (972)

50 (725)

33 (478)

C 4 bar

(87 psi)

(116 psi)

100

150

200 3,2 A

2,4 B

1,7 C

AIR CONSUMPTION

A 8 bar

0 0 l/min 10,25 21,00 32,50 42,00 (gpm) (2,7) (5,5) (8,6) (11,1)

KIND OF FLUID: SAE30 oil (ISO VG 100) - 20 °C

Article Compatible fluids Type of seals

120D/91 chemical and industrial fluids teflon

Suction tube upper body

AISI 304 stainless steel

Suction tube

AISI 304 stainless steel

Air inlet connection

F 1/2”

Fluid outlet connection

F 3/4”

Suction tube length

modular (F 1”)

Suction tube diameter

ø 60

Max. air consumption 8 bar

2,8 m3/min

Noise level

80 dB

Air max. feed pressure

8 bar No. 1 packing m 3 0,045 kg 15,5

321 321

CATALOGO LIST 217 pag 285-330 GB ok

322 322

23-06-2006

15:50

Pagina 322

ACCESSORIES FOR INDUSTRIAL PUMPS Art. 10/10 Wall bracket in painted steel for wall-mounting of integral and flanged industrial pumps, series 900 and 1200

Art. 10/10 Art.10/11 Wall bracket in painted steel with dampers for wall-mounting of integral and flanged industrial pumps, series 900 and 1200

Art. 10/11 Art. 10/12 Wall bracket in painted steel for wall-mounting of divorced industrial pumps, series 900 and 1200

Art. 10/12 Art. 10/13 Wall bracket in painted steel with dampers for wall-mounting of divorced industrial pumps, series 900 and 1200

Art. 10/13

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 323

ACCESSORIES FOR INDUSTRIAL PUMPS Art. 10/17 Wall bracket in painted steel with dampers for wall-mounting of flanged industrial pumps, series 1500 and 1800

Art. 10/17 Art. 10/18 Wall bracket in painted steel with dampers for wall-mounting of divorced industrial pumps, with suction tube Ø 100 mm, series 900 and 1200

Art. 10/18 Art. 10/14 Bung adaptor, for industrial pumps with suction tube, ø 45 mm series 900 and 1200

Art. 10/15 Bung adaptor, for industrial pumps with suction tube, ø 53 mm series 900 and 1200

Art. 10/14 Art. 10/09 Adaptor for integral and flanged pumps series 900 e 1200, for application with other brackets

Art. 10/09

323 323

CATALOGO LIST 217 pag 285-330 GB ok

324 324

23-06-2006

15:50

Pagina 324

ACCESSORIES FOR INDUSTRIAL PUMPS DRUM COVER FOR PUMPS WITH SUCTION TUBE Ø 45

Union ø 45

Art. 10/50 Drum cover Ø 600 mm for drums 180 - 220 Kg (drums ext 550 - 600 mm)

Art. 10/51 Drum cover Ø 420 mm for drums 50 - 60 Kg (drums ext 370 - 420 mm)

Art. 10/50 Art. 10/51 Art. 10/52

Art. 10/52 Drum cover Ø 385 mm for drums 30 - 50 Kg (drums ext 340 - 385 mm)

DRUM COVER FOR PUMPS WITH SUCTION TUBE Ø 50,8

Union ø 50,8

Art. 10/55 Drum cover Ø 600 mm for drums 180 - 220 Kg (drums ext 550 - 600 mm)

Art. 10/56 Drum cover Ø 420 mm for drums 50 - 60 Kg (drums ext 370 - 420 mm)

Art. 10/55 Art. 10/56 Art. 10/57

Art. 10/57 Drum cover Ø 385 mm for drums 30 - 50 Kg (drums ext 340 - 385 mm)

DRUM COVER WITH THREADED BUSHING 2” F

Union F 2”

Art. 65160 Drum cover Ø 600 mm for drums 180 - 220 Kg (drums ext ø 550 - 600 mm) suitable to fit pump bung adaptor

Art. 65142 Drum cover Ø 420 mm for drums 50 - 60 Kg (drums ext ø 370 - 420 mm) suitable to fit pump bung adaptor

Art. 65138 Art. 65160 Art. 65142 Art. 65138

Drum cover Ø 385 mm for drums 30 - 50 Kg (drums ext ø 340 - 385 mm) suitable to fit pump bung adaptor

Drum cover Drum cover Follower plate

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 325

ACCESSORIES FOR INDUSTRIAL PUMPS

325 325

FOLLOWER PLATE FOR PUMPS WITH SUCTION TUBE Ø 45

Union ø 45

Art. 10/60 Follower plate Ø 585 mm for drums 180 - 220 Kg (drums int. ø 540 - 580 mm)

Art. 10/61 Follower plate Ø 400 mm for drums 50 - 60 Kg (drums int. ø 360 - 400 mm))

Art. 10/62 Art. 10/60 Art. 10/61 Art. 10/62

Follower plate Ø 370 mm for drums 30 - 50 Kg (drums int. ø 335 - 360 mm)

FOLLOWER PLATE FOR PUMPS WITH SUCTION TUBE Ø 50,8

Union ø 50,8

Art. 10/65 Follower plate Ø 585 mm for drums 180 - 220 Kg (drums int. ø 540 - 580 mm)

Art. 10/66 Follower plate Ø 400 mm for drums 50 - 60 Kg (drums int. ø 360 - 400 mm)

Art. 10/67 Art. 10/65 Art. 10/66 Art. 10/67

Follower plate Ø 370 mm for drums 30 - 50 Kg (drums int.ø 335 - 360 mm)

Art. 10/22 Extension ø 34 - thread 1”G - M/M - 660 mm usable with modular pumps series 900 - 1200

Art. 10/23 Extension ø 34 - thread 1”G - M/M - 960 mm usable with modular pumps series 900 - 1200

Art. 10/24 Extension ø 34 - thread1”G - M/M - 1260 mm usable with modular pumps series 900 - 1200

Art. 10/22

Art. 10/23 for other information

Art. 10/24

refer to page 234

Art. 10/20 Foot valve with filter - thread 1” F - for combining with extensions ø 34 - thread 1” M

Art. 10/20

CATALOGO LIST 217 pag 285-330 GB ok

326 326

23-06-2006

15:50

Pagina 326

ACCESSORIES FOR INDUSTRIAL PUMPS Art. 997.505

Hose - 3/4” F/M - 5 m - 150 bar

Art. 998.501

Hose - 1” F/M - 1 m - 150 bar

Art. 998.502

Hose - 1” F/M - 2 m - 150 bar

Art. 998.515

Hose - 1” F/M - 15 m - 150 bar

Art. 9911.310 Hose - 1.1/2” F/M - 10 m - 10 bar Art. 997.505 Art. 998.501 Art. 998.502 Art. 998.515 Art. 9911.310

for other hoses refer to page 408

Art. 33153 High delivery oil and grease gun, equipped with: - inlet swivel joint 3/4” F - rigid terminal with free outlet - maximum pressure 100 bar Ideal for high deliveries of oils, lubricants and allied products (refer to page 218)

Art. 33153 Art. 33701

(*) (*)

Digital litre-counter (weight 1,6 kg) for oil and antifreeze liquid, ideal for high capacity transfer pumps equipped with: - connections F/F 3/4” - 1” - standard penlight battery powered

Art. 33703 Digital litre-counter (weight 3.2 kg) for diesel oil, oil and antifreeze liquid, ideal for high capacity transfer pumps, equipped with: - connections F/F 1.1/2” - standard penlight battery powered

Art. 33705 Art. 33701 Art. 33703 Art. 33705

Digital litre-counter (weight 1,6 Kg) for diesel oil, ideal for high capacity transfer pumps, equipped with: - connections F/F 1” - standard penlight battery powered

(*) Not type-approved for public use (*) Articles not manufactured by Raasm

Article

for technical specification refer to page 205

33701

33703

33705

oils, lubricants and similar

diesel oil, oil and similar

diesel oil

Inlet

3/4”-1” F

1.1/2” F

1” F

Outlet

3/4”-1” F

1.1/2” F

1” F

Min. delivery

6 l/min

15 l/min

10 l/min

Max. delivery

60 l/min

150 l/min

100 l/min

Max. pressure

70 bar

20 bar

30 bar

Tolerance

+/- 0,5%

Max. viscosity

SAE 240

SAE 130

diesel oil

Weight

1600 g

3200 g

1600 g

Compatible fluids

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

16:21

Pagina 327

327 327

PUMP ELEVATORS single column pump elevator Single column industrial pump elevator with or without bedplate. Elevator is air operated and lifts pump assy via the side mounted 3-ways valve. Pump assy is lowered by gravity. It is suitable for drums 50 - 200 Kg.

Art. 10/81

Art. 10/80 Art. 10/80 Single column pump elevator with bedplate. Suitable for drums 50 - 200 Kg No. 1 packing

m 3 1,155

kg 78

Art. 10/81 Single column pump elevator. Suitable for drums 50 - 200 Kg No. 1 packing

m 3 0,380

kg 66

1763 (stroke 1000)

1738 (stroke 1000)

OVERALL DIMENSIONS

866

630

715

255

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 328

PUMP ELEVATOR

328 328 twin column pump elevator Twin column industrial pump elevator with bedplate. Elevator is air operated and lifts pump assy via the side mounted 3-ways valve. Pump assy is lowered by gravity. It is suitable for drums 50 - 200 Kg

Art. 10/82 Art. 10/82 Twin column pump elevator with bedplate. It is suitable for drums 50-200 Kg. m 3 1,448

kg 128

OVERALL DIMENSIONS

1763 (stroke 1000)

No. 1 packing

1086

630

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 329

329 329

TWIN POST BRIDGE HOIST twin post bridge hoist Air operated twin ram hoist for use with suitable industrial pump. Essential when pumping hight viscosity and heavy materials. It is raised and lowered by compressed air, via the side mounted 3-way valve. When used with a suitable follower plate (supplied separately) it ensures pump prime on the heaviest materials. Can be used with 50 - 200 Kg drums with suitable follower plate.

Art. 11/60

Art. 10/85 Art. 10/85 Industrial pump elvevator and fluid press. It is suitable for drums 50-200 Kg No. 1 packing

m 3 1,405

kg 162

Art. 11/60 Follower plate Ø 585 mm with double sealing NBR ring, to be used with air operated pump elevator - fluid press for drums 180-220 Kg, for grease or high viscosity fluid.

1711 (stroke 1000)

OVERALL DIMENSIONS

1086

630

CATALOGO LIST 217 pag 285-330 GB ok

23-06-2006

15:50

Pagina 330

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:24

Pagina 331

HOSE REELS

331 331

HOSE REEL ADVANTAGES

page

332

CHOOSING A HOSE REEL

page

334

GUIDE TO READING THE CATALOGUE FOR CHOOSING A HOSE REEL

page

336

SERIES 260 - ENCLOSED

20 BAR

SERIES AIR - WATER

20 BAR

SERIES WATER - HOT WATER

100 BAR

SERIES WATER - HOT WATER

200 BAR

SERIES WATER - HOT WATER

400 BAR

SERIES AISI 304

10 - 100 BAR 200 - 400 BAR

WATER - HOT WATER

SERIES OIL AND ALLIED PRODUCTS 150 BAR

SERIES GREASE

600 - 400 BAR

338 page 340 page 348 page 354 page 358 page

page

362

page

370

page

378

SERIES DIESEL OIL

10 BAR

page

386

SERIES WELDING

20 BAR

page

390

SERIES LPG - NATURAL GAS

20 BAR

page

392

page

394

ACCESSORIES - HOSES

CATALOGO LIST 217 pag 331-360 GB ok

332 332

21-06-2006

16:24

Pagina 332

HOSE REEL ADVANTAGES

Do you know how a steel tape measure is made? Do you know how handy it is to use and rewind?

Imagine if the steel tape measure you often use does not have its special case which, as well as protecting it, also allows you to extend it to the required length and rewind it easily with a single movement.

How would you manage it or take it with you?

But if you are already worried about managing a steel tape measure without its special winding case, which does not weigh more than 50 - 100 grams and is never more than 3 - 5 metres long, how would you manage hoses 10 - 30 metres long and weighing 5 - 30 kg?

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:24

Pagina 333

333 333 The hose reels are a handy solution for problems of space The hose reels are compact and sturdy. The hose reels enable the required length of hose to be quickly and easily extracted, for better work and functionality. With the hose reel, hose rewinding is quick and safe, for an orderly workplace free of hindrances, while safeguarding against wear and possible breakage of the hoses themselves. The hose reels keep the station clean and orderly. Operators can work in complete safety, with a device always ready to be used.

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:24

Pagina 334

CHOOSING A HOSE REEL

334 334

RAASM offers a very wide range of hose reels suitable for numerous needs.

When choosing a hose reel, it is important to consider the following aspects: - type of fluid to be delivered, - flowrate in l/min. to be delivered, - length and diameter of hose to be used, - pressure of fluid The table below will help you choose a hose reel according to the parameters given.

Hose reels series Material AIR - WATER

WATER

OIL, ANTIFREEZE AND ALLIED PRODUCTS

GREASE

DIESEL OIL

20 BAR

100 BAR

200 BAR

400 BAR

260

380 - 390

420 - 430

440 - 450

plastic ABS

stainless steel or painted

painted steel

stain or

11 m - 6x10 11 m - 8x12

18 m - 3/8”

18 m - 3/8” 15 m - 1/2”

(page 338)

(page 340)

(page 340 - 362)

(page 344)

(page

17 m - 3/8”

15 m - 1/2”

(page 348)

(page 348 - 364)

17 m - 5/16”

18 m - 3/8”

(page 354)

(page 354 - 366)

17 m - 5/16”

18 m - 3/8”

(page 358)

(page 358 - 368)

17 m - 3/8”

15 m - 1/2”

(page 370)

(page 374)

16 m - 1/4”

18 m - 1/4” 15 m - 3/8”

(page 378)

(page 382)

150 BAR

600 BAR

10 BAR

(page

WELDING GAS

20 BAR

LPG - NATURAL GAS

20 BAR

Note: The measurements in the table are approximate

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:24

Pagina 335

SUITABLE FOR YOUR NEEDS

520 - 530

540 - 550

560

stainless steel or painted

/8” /2”

25 m - 1/2”

30 m - 1/2” 20 m - 3/4” 15 m - 1”

60 m - 1/2” 40 m - 3/4” 30 m - 1”

44)

(page 340 - 362)

618 - 638

617 - 637

natural gas painted steel

painted steel

100 m - 1/2” 60 m - 3/4” 40 m - 1”

(page 340 - 362)

(page 347)

(page 346)

25 m -1/2”

30 m - 1/2” 20 m - 3/4” 15 m - 1”

60 m - 1/2” 40 m - 3/4” 30 m - 1”

100 m - 1/2” 60 m - 3/4” 40 m - 1”

(page 348 - 364)

(page 353)

(page 352)

25 m - 3/8”

30 m - 3/8”

50 m - 3/8”

(page 354 - 366)

25 m - 3/8”

30 m - 3/8”

50 m - 3/8”

(page 358 - 368)

/2”

25 m - 1/2”

30 m - 1/2” 20 m - 3/4” 15 m - 1”

60 m - 1/2” 40 m - 3/4” 30 m - 1”

74)

(page 370)

/4” /8”

25 m - 3/8”

30 m - 3/8”

(page 378)

25 m - 1/2”

20 m - 3/4” 15 m - 1”

40 m - 3/4” 30 m - 1”

(page 386)

430 - 530 - 540 430 - 530 - 540

335 335

welding painted steel

100 m - 1/2” 60 m - 3/4” 40 m - 1”

(page 377)

(page 376)

400 bar

100 m - 1/2”

35 m - 2 X 1/4” 35 m - 2 X 5/16” 27 m - 2 X 3/8”

(page 385)

(page 384)

60 m - 3/4” 40 m 1”

60 m - 3/4” 40 m 1” 30 m -1.1/4” 20 m -1.1/2”

(page 389)

(page 388)

30 m - 5/16” 30 m - 3/8”

(page 390)

(page 392)

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 336

GUIDE TO READING THE CATALOGUE

336 336

Each page of the catalogue follows the same graphic layout. For greater clarity the various specifications for choosing the hose reels are illustrated according to requirements and the characteristics of the RAASM range of hose reels. For example, suppose the customer has to use a hose reel: - for feeding a 1/4” pneumatic screwer - at an air feed pressure of approx. 8 - 10 bar - with a maximum distance of 10 - 11 metres between hose reel and point of use - in a closed place The choice will be made as follows: After taking into account the basic elements for the choice of hose reel, also the following optimum characteristics will be considered:

of fluid 1 Type to be delivered

(water, air, oil, grease, other)

2 Pressure of fluid to be delivered linked to the feed pressure

diameter length 3 Hose 4 Hose on which the capacity of the the distance between

the hose reel and the places where the fluid is to be delivered

PAINTED FIXED HOSE REELS Air - Water 20 bar

Hose reel with hoses in black synthetic rubber and galvanised steel fittings - brass swivel joint - “viton” seals Article

Hose length

Hose ø

Connection outlet inlet

without hose

hose itself depends

or swivelling A Fixed if the hose reel is used in a battery its operating range will be limited, therefore the fixed version is preferable. For uses requiring a greater operating range the swivelling version is recommended

steel or painted B Stainless this depends on the workplace (closed or open) and the type of hose reel use (protected or exposed to water sprays).

without hose

or enclosed C Open the enclosed version is available only for the following fluids: air, oil and grease. The choice is up to the customer

The same models, swivelling version, on page 342

OVERALL DIMENSIONS

The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

dimensions D Overall knowing the overall dimensions enables the suitability of the hose reel station to be duly checked.

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 337

TECHNICAL CHARACTERISTICS Automatic stopping system: allows the hose to be locked at the required length

Adjustable arm: to favour hose extraction according to hose reel installation

337 337 Drum support bushings in brass alloy, self-lubricating, effective and corrosion resistant

Hose reel drum: sturdy and practical with ribbing and rounded edges

Fully enclosed and protected constant-force automatic rewinding spring Self-lubricating hose guide rollers: wide multi-way opening

Adjustable hose stop

Corrosion proof: all the components are treated or painted for external use

Drum support bushings in self-lubricating material

Fluid passage swivel joint in brass / carbon steel / s/steel / AISI 304 s/steel with polyurethane / viton / teflon seals

Easy to install anywhere: on wall, floor, ceiling, vehicles, etc.

Fluid conveyance joint

Rewinding spring

The easy to install adjustable bracket allows the hose reel to be removed for any maintenance

The trip enables automatic stopping at the required length

Adjustable hose stop

Self-lubricating hose guide rollers

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 338

ENCLOSED HOSE REELS

338 338

Series 260

Air - Water 20 bar

wall support with bayonet hooking

Enclosed hose reel equipped with adjustable support and wall bracket with bayonet hooking. Suitable for the distribution of compressed air, for having tools always ready to use, and for low pressure delivery of water. Article

Hose length

Hose ø

Connection inlet outlet

89010 89011

11m (971.111) 11m (971.011)

8X12 6X10

M 1/4”G M 1/4”G

OVERALL DIMENSIONS 320

m 3 0,019

kg 6,5

GASOLIN

Art. 89001 Series 260 hose reels are equipped with a wall bracket with bayonet hooking.The placing of several brackets in the service points allows the hose reel to be easily moved to the various workstations.

Quick fitting of the hose reel in the wall bracket and immediate connection to the compressed air system

To prevent removal or theft of the hose reel, it can be secured with a bolt or padlock.

242 206

285

390

No. 1 packing

165 132

110

M 1/4”G M 1/4”G

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 339

ENCLOSED HOSE REELS Series 260 Air - Water 20 bar

339 339

simple wall support

Enclosed hose reel equipped with adjustable support. Suitable for the distribution of compressed air, for having tools always ready to use, and for low pressure delivery of water.

11m (971.111) 11m (971.011)

8X12 6X10

M 1/4”G M 1/4”G

OVERALL DIMENSIONS 318

110

320

No. 1 packing

m 3 0,019

kg 6

M 1/4”G M 1/4”G

89109 89110

Connection inlet outlet

318

Hose ø

94 130

Hose length

285

Article

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

340 340

16:25

Pagina 340

PAINTED FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Air - Water 20 bar

- brass swivel joint - “viton” seals

S. 390

S. 430

Hose length

Hose ø

8390.100 8390.101 8390.102

/ 12m (995.211) 18m (995.217)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.220) 25m (996.225)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.215) 20m (997.220) 15m (998.215) / 30m (996.230)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

/ 30m (997.230) 40m (997.240) 20m (998.220) 30m (998.230) / 40m (996.240) 50m (996.250) 60m (996.260)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,200

8430.100 8430.101 8430.102 8430.103 8430.104

S. 530

8530.100 8530.101 8530.102

8540.100 8540.101 8540.102 8540.103 8540.105 8540.106

S. 540

S. 560

Connection inlet outlet

Article

8560.100 8560.101 8560.103 8560.104 8560.105 8560.106 8560.107 8560.108 8560.109

F 3/8”G F 3/8”G F 3/8”G

F 3/8”G M 3/8”G M 3/8”G

from kg 11 to 18

F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

The same models, swivelling version, on page 342

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 341

STAINLESS STEEL FIXED HOSE REELS

341 341

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Air - Water 20 bar

- brass swivel joint - “viton” seals

S. 390

S. 430

Hose length

Hose ø

8392.100 8392.101 8392.102

/ 12m (995.211) 18m (995.217)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.220) 25m (996.225)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.215) 20m (997.220) 15m (998.215) / 30m (996.230)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

/ 30m (997.230) 40m (997.240) 20m (998.220) 30m (998.230) / 40m (996.240) 50m (996.250) 60m (996.260)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,200

8432.100 8432.101 8432.102 8432.103 8432.104

S. 530

8532.100 8532.101 8532.102

S. 540

8542.100 8542.101 8542.102 8542.103 8542.105 8542.106

S. 560

Connection inlet outlet

Article

8562.100 8562.101 8562.103 8562.104 8562.105 8562.106 8562.107 8562.108 8562.109

F 3/8”G F 3/8”G F 3/8”G

F 3/8”G M 3/8”G M 3/8”G

from kg 11 to 18

F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2” G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

The same models, swivelling version, on page 343

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 342

PAINTED SWIVELLING HOSE REELS

342 342

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Air - water 20 bar

- brass swivel joint - “viton” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8380.100 8380.101 8380.102

/ 12m (995.211) 18m (995.217)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.220) 25m (996.225)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.215) 20m (997.220) 15m (998.215) / 30m (996.230)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

8420.100 8420.101 8420.102 8420.103 8420.104

8520.100 8520.101 8520.102

8550.100 8550.101 8550.102 8550.103 8550.105 8550.106

F 3/8”G M 3/8”G M 3/8”G

F 3/8”G F 3/8”G F 3/8”G

from kg 12 to 19

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2”G

F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

from kg 15 to 25

F 1/2”G M 1/2”G M 1/2”G

F 1/2”G F 1/2”G F 1/2”G

from kg 20 to 43

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 340

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 343

STAINLESS STEEL SWIVELLING HOSE REELS

343 343

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Air - water 20 bar

- brass swivel joint - “viton” seals.

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8382.100 8382.101 8382.102

/ 12m (995.211) 18m (995.217)

without hose 3/8” 3/8”

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,050

from kg 12 to 19

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,065

from kg 15 to 25

/ 20m (996.220) 25m (996.225)

without hose 1/2” 1/2”

F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,065

from kg 20 to 43

/ 15m (997.215) 20m (997.220) 15m (998.215) / 30m (996.230)

without hose 3/4” 3/4” 1” without hose 1/2”

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,120

from kg 25 to 41

8422.100 8422.101 8422.102 8422.103 8422.104

8522.100 8522.101 8522.102

8552.100 8552.101 8552.102 8552.103 8552.105 8552.106

F 3/8”G M 3/8”G M 3/8”G

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2”G

F 1/2”G M 1/2”G M 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

Adjustable support for hose reel S.540

The same models, fixed version, on page 341

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

344 344

16:25

Pagina 344

ENCLOSED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Air - Water 20 bar

- brass swivel joint - ”viton” seals

FIXED S. 450

Article

Hose length

Hose ø

8450.100 8450.101 8450.102 8450.103 8450.104

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

No. 1 packing

m 3 0,085

Connection inlet outlet F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2”G

from kg 21 to 29

OVERALL DIMENSIONS 500 485

8440.100 8440.101 8440.102 8440.103 8440.104

/ 12m (995.212) 18m (995.218) 10m (996.210) 15m (996.215)

without hose 3/8” 3/8” 1/2” 1/2”

No. 1 packing

m 3 0,085

180 236

236

SWIVELLING S. 440

217 177

485

217 140

F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 3/8”G M 3/8”G M 1/2”G M 1/2”G

from kg 22 to 30

OVERALL DIMENSIONS 208 140

The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

118 164

208 162 485

164

564 485

-55 0°

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The fixed hose reel installation system can be easily modified according to needs (see instructions on page 396).

+55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clampingwith two screws

The swivelling hose reel installation system can be easily modified according to needs (see instructions on page 396)

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 345

CATALOGO LIST 217 pag 331-360 GB ok

346 346

21-06-2006

16:25

Pagina 346

HYDRAULIC MOTOR-OPERATED HOSE REELS Hose reel with rewinding by hydraulic motor, hoses in black synthetic rubber and galvanised steel fittings - brass swivel joint - ”viton” seals

Air - Water 20 bar

S. 617

S. 637

Article

Hose length

Hose ø

8617.100 8617.101 8617.102 8617.103 8617.104 8617.105 8617.106 8617.107 8617.108

/ 30m (996.230) 40m (996.240) 50m (996.250) 15m (997.215) 20m (997.220) 30m (997.230) 15m (998.215) 20m (998.220)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

8637.100 8637.101 8637.102 8637.103 8637.104 8637.105 8637.106 8637.107 8637.108 8637.109 8637.110

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 55 to 82

/ without hose 60m (996.260) 1/2” 70m (996.270) 1/2” 80m (996.280) 1/2” 90m (996.290) 1/2” 100m (996.2100) 1/2” 40m (997.240) 3/4” 50m (997.250) 3/4” 60m (997.260) 3/4” 30m (998.230) 1” 40m (998.240) 1” No. 1 packing

The hydraulic motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

m 3 0,370

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 75 to 126

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 617 S. 637

E F G H I L M D C B A 283 185 140 130 310 360 220 463 692 570 621 467 370 140 130 310 360 400 649 692 570 621

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 347

AIR MOTOR-OPERATED HOSE REELS

347 347

Hose reel with rewinding by air motor, hoses in black synthetic rubber and galvanised steel fittings - brass swivel joint - ”viton” seals

Air - Water 20 bar

S. 618

S. 638

Article

Hose length

Hose ø

8618.100 8618.101 8618.102 8618.103 8618.104 8618.105 8618.106 8618.107 8618.108

/ 30m (996.230) 40m (996.240) 50m (996.250) 15m (997.215) 20m (997.220) 30m (997.230) 15m (998.215) 20m (998.220)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

8638.100 8638.101 8638.102 8638.103 8638.104 8638.105 8638.106 8638.107 8638.108 8638.109 8638.110

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 51 to 78

The air motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

m 3 0,370

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 71 to 122

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 618 S. 638

A B C D E F G H I L M 283 185 140 130 310 360 220 555 692 570 621 467 370 140 130 310 360 400 740 692 570 621

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

348 348

16:25

Pagina 348

PAINTED FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 100 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 390

Hose length

Hose ø

8390.200 8390.201 8390.202 8391.201

/ 12m (995.313) 17m (995.318) 12m (995.412)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,050

/ 10m (996.311) 15m (996.316) 15m (996.415)

without hose 1/2” 1/2” 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 20m (996.321) 25m (996.326) 25m (996.425)

without hose 1/2” 1/2” 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 15m (997.315) 20m (997.320) 15m (998.315) / 30m (996.331) 20m (997.420)

without hose 3/4” 3/4” 1” without hose 1/2” 3/4” hygieninc

No. 1 packing

m 3 0,120

/ 30m (997.330) 40m (997.340) 20m (998.320) 30m (998.330) / 40m (996.341) 50m (996.351) 60m (996.361)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,200

8430.200 8430.201 8430.202 8431.202

S. 430

8530.200 8530.201 8530.202 8531.202

S. 530

8540.200 8540.201 8540.202 8540.203 8540.205 8540.206 8541.202

S. 540

8560.200 8560.201 8560.203 8560.204 8560.205 8560.206 8560.207 8560.208 8560.209

S. 560

Connection inlet outlet

Article

The same models, swivelling version, on page 350

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 3/8”G M 3/8”G M 3/8”G

from kg 11 to 18

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G M 3/4”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 349

STAINLESS STEEL FIXED HOSE REELS

349 349

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 100 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 390

Hose length

Hose ø

8392.200 8392.201 8392.202 8393.201

/ 12m (995.313) 17m (995.318) 12m (995.412)

without hose 3/8” 3/8” 3/8” hygieninc

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,050

from kg 11 to 18

/ 10m (996.311) 15m (996.316) 15m (996.415)

without hose 1/2” 1/2” 1/2” hygieninc

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,065

from kg 14 to 24

/ 20m (996.321) 25m (996.326) 25m (996.425)

without hose 1/2” 1/2” 1/2” hygieninc

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,065

from kg 19 to 42

/ 15m (997.315) 20m (997.320) 15m (998.315) / 30m (996.331) 20m (997.420)

without hose 3/4” 3/4” 1” without hose 1/2” 3/4” hygieninc

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1”G

No. 1 packing

m 3 0,120

from kg 24 to 40

/ 30m (997.330) 40m (997.340) 20m (998.320) 30m (998.330) / 40m (996.341) 50m (996.351) 60m (996.361)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

No. 1 packing

m 3 0,200

from kg 30 to 80

8434.200 8432.201 8432.202 8433.202

S. 430

8534.200 8532.201 8532.202 8533.202

S. 530

8544.200 8542.201 8542.202 8542.203 8544.205 8542.206 8543.202

S. 540

8564.200 8562.201 8562.203 8562.204 8562.205 8564.206 8562.207 8562.208 8562.209

S. 560

Connection inlet outlet

Article

The same models, swivelling version, on page 351

F 3/8”-1/2”G M 3/8”G M 3/8”G M 3/8”G

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G M 3/4”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 350

PAINTED SWIVELLING HOSE REELS

350 350

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 100 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 380

Hose length

Hose ø

8380.200 8380.201 8380.202 8381.201

/ 12m (995.313) 17m (995.318) 12m (995.412)

without hose 3/8” 3/8” 3/8” hygieninc

8420.200 8420.201 8420.202 8421.202

/ 10m (996.311) 15m (996.316) 15m (996.415)

8520.200 8520.201 8520.202 8521.202

/ 20m (996.321) 25m (996.326) 25m (996.425)

S. 550

8550.200 8550.201 8550.202 8550.203 8550.205 8550.206 8551.202

/ 15m (997.315) 20m (997.320) 15m (998.315) / 30m (996.331) 20m (997.420)

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 15 a 25

without hose 1/2” 1/2” 1/2” hygieninc

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

m 3 0,065

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 20 a 43

without hose 3/4” 3/4” 1” without hose 1/2” 3/4” hygieninc

No. 1 packing

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

m 3 0,065

No. 1 packing

F 3/8”-1/2”G M 3/8”G M 3/8”G M 3/8”G

from kg 12 a 19

without hose 1/2” 1/2” 1/2” hygieninc

No. 1 packing

S. 520

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

m 3 0,050

No. 1 packing

S. 420

Connection inlet outlet

Article

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1”G

m 3 0,120

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G M 3/4”G

from kg 25 a 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 348

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 351

STAINLESS STEEL SWIVELLING HOSE REELS

351 351

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 100 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8382.200 8382.201 8382.202 8383.201

/ 12m (995.313) 17m (995.318) 12m (995.412)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,050

/ 10m (996.311) 15m (996.316) 15m (996.415)

without hose 1/2” 1/2” 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 20m (996.321) 25m (996.326) 25m (996.425)

without hose 1/2” 1/2” 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 15m (997.315) 20m (997.320) 15m (998.315) / 30m (996.331) 20m (997.420)

without hose 3/4” 3/4” 1” without hose 1/2” 3/4” hygieninc

No. 1 packing

m 3 0,120

8424.200 8422.201 8422.202 8423.202

8524.200 8522.201 8522.202 8523.202

8554.200 8552.201 8552.202 8552.203 8554.205 8552.206 8553.202

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 3/8”G M 3/8”G M 3/8”G

from kg 12 to 19

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

from kg 15 to 25

F 1/2”G M 1/2”G M 1/2”G M 1/2”G

F 1/2”G F 1/2”G F 1/2”G F 1/2”G

from kg 20 to 43

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G M 3/4”G

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 349

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

352 352

21-06-2006

16:25

Pagina 352

HYDRAULIC MOTOR-OPERATED HOSE REELS Hose reel with rewinding by hydraulic motor, hoses in black synthetic rubber and galvanised steel fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 100 bar

S. 617

S. 637

The hydraulic motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Article

Hose length

Hose ø

8617.200 8617.201 8617.202 8617.203 8617.204 8617.205 8617.206 8617.207 8617.208

/ 30m (996.331) 40m (996.341) 50m (996.351) 15m (997.315) 20m (997.320) 30m (997.330) 15m (998.315) 20m (998.320)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

/ 60m (996.361) 70m (996.371) 80m (996.381) 90m (996.391) 100m (996.399) 40m (997.340) 50m (997.350) 60m (997.360) 30m (998.330) 40m (998.340)

without hose 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,370

8637.200 8637.201 8637.202 8637.203 8637.204 8637.205 8637.206 8637.207 8637.208 8637.209 8637.210

Connection inlet outlet F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 55 to 74

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 75 to 118

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 617 S. 637

E F G H I L M D C B A 283 185 140 130 310 360 220 463 692 570 621 467 370 140 130 310 360 400 649 692 570 621

CATALOGO LIST 217 pag 331-360 GB ok

23-06-2006

16:57

Pagina 353

AIR MOTOR-OPERATED HOSE REELS

353 353

Hose reel with rewinding by air motor, hoses in black synthetic rubber and galvanised steel fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 100 bar

S. 618

S. 638

The air motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Article

Hose length

Hose ø

8618.200 8618.201 8618.202 8618.203 8618.204 8618.205 8618.206 8618.207 8618.208

/ 30m (996.331) 40m (996.341) 50m (996.351) 15m (997.315) 20m (997.320) 30m (997.330) 15m (998.315) 20m (998.320)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

/ 60m (996.361) 70m (996.371) 80m (996.381) 90m (996.391) 100m (996.399) 40m (997.340) 50m (997.350) 60m (997.360) 30m (998.330) 40m (998.340)

without hose 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,370

8638.200 8638.201 8638.202 8638.203 8638.204 8638.205 8638.206 8638.207 8638.208 8638.209 8638.210

Connection inlet outlet F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

from kg 51 to 78

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

from kg 71 to 122

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 618 S. 638

A B C D E F G H I L M 283 185 140 130 310 360 220 555 692 570 621 467 370 140 130 310 360 400 740 692 570 621

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

354 354

16:25

Pagina 354

PAINTED FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 200 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 390

Hose length

Hose ø

8390.300 8390.301 8390.302 8391.301

/ 12m (994.512) 17m (994.517) 12m (994.612)

without hose 5/16” 5/16” 5/16” hygieninc

No. 1 packing

m 3 0,050

/ 12m (995.512) 18m (995.518) 18m (995.618)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (995.520) 25m (995.525) 25m (995.625)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (995.530) 30m (995.630)

without hose 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,120

/ 40m (995.540) 50m (995.550)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,200

8430.300 8430.301 8430.302 8431.302

S. 430

8530.300 8530.301 8530.302 8531.302

S. 530

8540.300 8540.301 8541.301

S. 540

8560.300 8560.301 8560.302

S. 560

Connection inlet outlet

Article

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

from kg 11 to 18

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 14 to 24

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 19 to 42

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 24 to 40

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 30 to 80

The same models, swivelling version, on page 356

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 355

STAINLESS STEEL FIXED HOSE REELS

355 355

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 200 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 390

Hose length

Hose ø

8392.300 8392.301 8392.302 8393.301

/ 12m (994.512) 17m (994.517) 12m (994.612)

without hose 5/16” 5/16” 5/16” hygieninc

No. 1 packing

m 3 0,050

/ 12m (995.512) 18m (995.518) 18m (995.618)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (995.520) 25m (995.525) 25m (995.625)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (995.530) 30m (995.630)

without hose 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,120

/ 40m (995.540) 50m (995.550)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,200

8434.300 8432.301 8432.302 8433.302

S. 430

8534.300 8532.301 8532.302 8533.302

S. 530

8544.300 8542.301 8543.301

S. 540

8564.300 8562.301 8562.302

S. 560

Connection inlet outlet

Article

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

from kg 11 to 18

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 14 to 24

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 19 to 42

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 24 to 40

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 30 to 80

The same models, swivelling version, on page 357

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 356

PAINTED SWIVELLING HOSE REELS

356 356

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 200 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8380.300 8380.301 8380.302 8381.301

/ 12m (994.512) 17m (994.517) 12m (994.612)

without hose 5/16” 5/16” 5/16” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,050

from kg 12 to 19

/ 12m (995.512) 18m (995.518) 18m (995.618)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 15 to 25

/ 20m (995.520) 25m (995.525) 25m (995.625)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 20 to 43

/ 30m (995.530) 30m (995.630)

without hose 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 25 to 41

8420.300 8420.301 8420.302 8421.302

8520.300 8520.301 8520.302 8521.302

8550.300 8550.301 8551.301

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

Adjustable support for hose reel S.540

The same models, fixed version, on page 354

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

23-06-2006

16:56

Pagina 357

STAINLESS STEEL SWIVELLING HOSE REELS

357 357

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 200 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8382.300 8382.301 8382.302 8383.301

/ 12m (994.512) 17m (994.517) 12m (994.612)

without hose 5/16” 5/16” 5/16” hygieninc

No. 1 packing

m 3 0,050

/ 12m (995.512) 18m (995.518) 18m (995.618)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (995.520) 25m (995.525) 25m (995.625)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (995.530) 30m (995.630)

without hose 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,120

8424.300 8422.301 8422.302 8423.302

8524.300 8522.301 8522.302 8523.302

8554.300 8552.301 8553.301

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

from kg 12 to 19

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 20 to 43

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 355

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 331-360 GB ok

23-06-2006

358 358

16:56

Pagina 358

PAINTED FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 400 bar

- AISI 304 stainless steel swivel joint - ”teflon” seals

S. 390

Hose length

Hose ø

8390.350 8390.351 8390.352 8391.351

/ 12m (994.712) 17m (994.717) 12m (994.812)

without hose 5/16” 5/16” 5/16” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,050

from kg 11 to 18

/ 12m (995.812) 18m (995.818) 18m (995.918)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 14 to 24

/ 20m (995.820) 25m (995.825) 25m (995.925)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 19 to 42

/ 30m (995.830) 30m (995.930)

without hose 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 24 to 40

/ 40m (995.840) 50m (995.850)

without hose 3/8” 3/8”

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,200

from kg 30 to 80

8430.350 8430.351 8430.352 8431.352

S. 430

S. 530

8530.350 8530.351 8530.352 8531.352

S. 540

8540.350 8540.351 8541.351

S. 560

Connection inlet outlet

Article

8560.350 8560.351 8560.352

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

The same models, swivelling version, on page 360

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 331-360 GB ok

23-06-2006

16:56

Pagina 359

STAINLESS STEEL FIXED HOSE REELS

359 359

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 400 bar

- AISI 304 stainless steel swivel joint - ”teflon” seals

S. 390

Hose length

Hose ø

8392.350 8392.351 8392.352 8393.351

/ 12m (994.712) 17m (994.717) 12m (994.812)

without hose 5/16” 5/16” 5/16” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,050

from kg 11 to 18

/ 12m (995.812) 18m (995.818) 18m (995.918)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 14 to 24

/ 20m (995.820) 25m (995.825) 25m (995.925)

without hose 3/8” 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 19 to 42

/ 30m (995.830) 30m (995.930)

without hose 3/8” 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 24 to 40

/ 40m (995.840) 50m (995.850)

without hose 3/8” 3/8”

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,200

from kg 30 to 80

8434.350 8432.351 8432.352 8433.352

S. 430

S. 530

8534.350 8532.351 8532.352 8533.352

8544.350 8542.351 8543.351

S. 540

S. 560

Connection inlet outlet

Article

8564.350 8562.351 8562.352

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

The same models, swivelling version, on page 361

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 560 578

CATALOGO LIST 217 pag 331-360 GB ok

21-06-2006

16:25

Pagina 360

PAINTED SWIVELLING HOSE REELS

360 360

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 400 bar

- AISI 304 stainless steel swivel joint - ”teflon” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8380.350 8380.351 8380.352 8381.351

/ 12m (994.712) 17m (994.717) 12m (994.812)

without hose 5/16” 5/16” 5/16” hygieninc

No. 1 packing

m 3 0,050

/ 12m (995.812) 18m (995.818) 18m (995.918)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (995.820) 25m (995.825) 25m (995.925)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (995.830) 30m (995.930)

without hose 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,120

8420.350 8420.351 8420.352 8421.352

8520.350 8520.351 8520.352 8521.352

8550.350 8550.351 8551.351

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

from kg 12 to 19

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 20 to 43

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 358

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 361

STAINLESS STEEL SWIVELLING HOSE REELS

361 361

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Water up to 130° C 400 bar

- AISI 304 stainless steel swivel joint - ”teflon” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8382.350 8382.351 8382.352 8383.351

/ 12m (994.712) 17m (994.717) 12m (994.812)

without hose 5/16” 5/16” 5/16” hygieninc

No. 1 packing

m 3 0,050

/ 12m (995.812) 18m (995.818) 18m (995.918)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (995.820) 25m (995.825) 25m (995.925)

without hose 3/8” 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (995.830) 30m (995.930)

without hose 3/8” 3/8” hygieninc

No. 1 packing

m 3 0,120

8424.350 8422.351 8422.352 8423.352

8524.350 8522.351 8522.352 8523.352

8554.350 8552.351 8553.351

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

from kg 12 to 19

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G F 3/8”G

from kg 20 to 43

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 359

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

362 362

21-06-2006

16:28

Pagina 362

S/STEEL FIXED HOSE REELS

AISI 304

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Air - Water 10 bar

S. 430

S. 530

Hose length

Hose ø

8434.200 8434.101 8434.102

/ 10m (986.110) 15m (986.115)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 20m (986.120) 25m (986.125)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 15m (987.115) 20m (987.120) 15m (988.115) / 30m (986.130)

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc without hose 1/2” hygieninc

No. 1 packing

m 3 0,120

/ 30m (987.130) 40m (987.140) 20m (988.120) 30m (988.130) / 40m (986.140) 50m (986.150) 60m (986.160)

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc 1” hygieninc without hose 1/2” hygieninc 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,200

8534.200 8534.101 8534.102

S. 540

8544.200 8544.101 8544.102 8544.103 8544.205 8544.106

S. 560

Connection inlet outlet

Article

8564.200 8564.101 8564.103 8564.104 8564.105 8564.206 8564.107 8564.108 8564.109

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 430 S. 530 S. 540 S. 560

A 186 203 300 488

B 140 153 218 399

C 196 220 228 238

D 226 258 268 272

E 115 115 190 368

F 460 550 550 522

G ø 420 ø 510 ø 510 ø 510

H 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 363

S/STEEL SWIVELLING HOSE REELS

363 363

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Air - Water 10 bar

ARIA

AISI 304

ACQUA 10 BAR

Hose length

Article

S. 420

8424.200 8424.101 8424.102

/ without hose 10m (986.110) 1/2” hygieninc 15m (986.115) 1/2” hygieninc

8524.200 8524.101 8524.102

F 1/2”G F 1/2”G F 1/2”G

m 3 0,065

No. 1 packing

S. 520

Connection inlet outlet

Hose ø

from kg 15 to 25

/ without hose 20m (986.120) 1/2” hygieninc 25m (986.125) 1/2” hygieninc

F 1/2”G F 1/2”G F 1/2”G

m 3 0,065

No. 1 packing

F 1/2”G M 1/2”G M 1/2”G

from kg 20 to 43

* S. 550

8554.200 8554.101 8554.102 8554.103 8554.205 8554.106

/ 15m (987.115) 20m (987.120) 15m (988.115) / 30m (986.130) No. 1 packing

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc without hose 1/2” hygieninc

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

m 3 0,120

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 25 to 41

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 420 S. 520 S. 550

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 703

CATALOGO LIST 217 pag 361-418 GB ok

364 364

21-06-2006

16:28

Pagina 364

S/STEEL FIXED HOSE REELS

AISI 304

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 100 bar

S. 430

S. 530

Hose length

Hose ø

8434.200 8434.201 8434.202

/ 10m (986.410) 15m (986.415)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 20m (986.420) 25m (986.425)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 15m (987.415) 20m (987.420) 15m (988.415) / 30m (986.430)

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc without hose 1/2” hygieninc

No. 1 packing

m 3 0,120

/ 30m (987.430) 40m (987.440) 20m (988.420) 30m (988.430) / 40m (986.440) 50m (986.450) 60m (986.460)

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc 1” hygieninc without hose 1/2” hygieninc 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,200

8534.200 8534.201 8534.202

S. 540

8544.200 8544.201 8544.202 8544.203 8544.205 8544.206

S. 560

Connection inlet outlet

Article

8564.200 8564.201 8564.203 8564.204 8564.205 8564.206 8564.207 8564.208 8564.209

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

Art. S. 430 S. 530 S. 540 S. 560

A 186 203 300 488

B 140 153 218 399

C 196 220 228 238

D 226 258 268 272

E 115 115 190 368

F 460 550 550 522

G ø 420 ø 510 ø 510 ø 510

H 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 365

S/STEEL SWIVELLING HOSE REELS

AISI 304

365 365

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 100 bar

S. 420

S. 520

Connection inlet outlet

Article

Hose length

Hose ø

8424.200 8424.201 8424.202

/ 10m (986.410) 15m (986.415)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 20m (986.420) 25m (986.425)

without hose 1/2” hygieninc 1/2” hygieninc

No. 1 packing

m 3 0,065

/ 15m (987.415) 20m (987.420) 15m (988.415) / 30m (986.430)

without hose 3/4” hygieninc 3/4” hygieninc 1” hygieninc without hose 1/2” hygieninc

No. 1 packing

m 3 0,120

8524.200 8524.201 8524.202

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 15 to 25

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 20 to 43

* S. 550

8554.200 8554.201 8554.202 8554.203 8554.205 8554.206

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 25 to 41

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55

D C

+55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

0°

Art. S. 420 S. 520 S. 550

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 703

CATALOGO LIST 217 pag 361-418 GB ok

366 366

21-06-2006

16:28

Pagina 366

S/STEEL FIXED HOSE REELS

AISI 304

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 200 bar

S. 430

S. 530

Hose length

Hose ø

8434.300 8434.301 8434.302

/ 12m (985.612) 18m (985.618)

without hose 3/8” hygieninc 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 14 to 24

/ 20m (985.620) 25m (985.625)

without hose 3/8” hygieninc 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 19 to 42

/ 30m (985.630)

without hose 3/8” hygieninc

F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 24 to 40

/ 40m (985.640) 50m (985.650)

without hose 3/8” hygieninc 3/8” hygieninc

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,200

from kg 30 to 80

8534.300 8534.301 8534.302

S. 540

8544.300 8544.301

S. 560

Connection inlet outlet

Article

8564.300 8564.301 8564.302

F 1/2”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

The adjustable arms can be easily repositioned according to needs (see page 396).

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

F G

Art. S. 430 S. 530 S. 540 S. 560

A 186 203 300 488

B 140 153 218 399

C 196 220 228 238

D 226 258 268 272

E 115 115 190 368

F 460 550 550 522

G ø 420 ø 510 ø 510 ø 510

H 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 367

S/STEEL SWIVELLING HOSE REELS

AISI 304

367 367

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”viton” seals

Water up to 130° C 200 bar

S. 420

S. 520

Connection inlet outlet

Article

Hose length

Hose ø

8424.300 8424.301 8424.302

/ 12m (985.612) 18m (985.618)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (985.620) 25m (985.625)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (985.630)

without hose 3/8” hygieninc

No. 1 packing

m 3 0,120

8524.300 8524.301 8524.302

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 20 to 43

* S. 550

8554.300 8554.301

F 3/8”G F 3/8”G

F 1/2”G F 3/8”G

from kg 25 to 41

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55 E

+55 D C

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

0°

Art. S. 420 S. 520 S. 550

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

368 368

21-06-2006

16:28

Pagina 368

S/STEEL FIXED HOSE REELS

AISI 304

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”teflon” seals

Water up to 130° C 400 bar

S. 430

S. 530

Hose length

Hose ø

8434.350 8434.351 8434.352

/ 12m (985.912) 18m (985.918)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (985.920) 25m (985.925)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (985.930)

without hose 3/8” hygieninc

No. 1 packing

m 3 0,120

/ 40m (985.940) 50m (985.950)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,200

8534.350 8534.351 8534.352

S. 540

8544.350 8544.351

S. 560

Connection inlet outlet

Article

8564.350 8564.351 8564.352

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 14 to 24

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 19 to 42

F 3/8”G F 3/8”G

F 1/2”G F 3/8”G

from kg 24 to 40

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 430 S. 530 S. 540 S. 560

A 186 203 300 488

B 140 153 218 399

C 196 220 228 238

D 226 258 268 272

E 115 115 190 368

F 460 550 550 522

G ø 420 ø 510 ø 510 ø 510

H 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 369

S/STEEL SWIVELLING HOSE REELS

AISI 304

369 369

Hose reel with hoses in synthetic rubber with blue hygienic covering and AISI 304 fittings - AISI 304 stainless steel swivel joint - ”teflon” seals

Water up to 130° C 400 bar

S. 420

S. 520

Connection inlet outlet

Article

Hose length

Hose ø

8424.350 8424.351 8424.352

/ 12m (985.912) 18m (985.918)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 20m (985.920) 25m (985.925)

without hose 3/8” hygieninc 3/8” hygieninc

No. 1 packing

m 3 0,065

/ 30m (985.930)

without hose 3/8” hygieninc

No. 1 packing

m 3 0,120

8524.350 8524.351 8524.352

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G F 3/8”G F 3/8”G

from kg 20 to 43

* S. 550

8554.350 8554.351

F 3/8”G F 3/8”G

F 1/2”G F 3/8”G

from kg 25 to 41

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 420 S. 520 S. 550

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

370 370

16:28

Pagina 370

PAINTED FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Oil and similar 150 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 390

S. 430

Hose length

Hose ø

8390.400 8390.401 8390.402

/ 12m (995.312) 17m (995.317)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.320) 25m (996.325)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.515) 20m (997.520) 15m (998.515) / 30m (996.330)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

/ 30m (997.530) 40m (997.540) 20m (998.520) 30m (998.530) / 40m (996.340) 50m (996.350) 60m (996.360)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,200

8430.400 8430.401 8430.402

S. 530

8530.400 8530.401 8530.402

8540.400 8540.401 8540.402 8540.403 8540.405 8540.406

S. 540

S. 560

Connection inlet outlet

Article

8560.400 8560.401 8560.403 8560.404 8560.405 8560.406 8560.407 8560.408 8560.409

F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 1/2”G M 1/2”G

from kg 11 to 18

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

The same models, swivelling version, on page 372

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 371

371 371

STAINLESS STEEL FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Oil and similar 150 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 390

S. 430

Hose length

Hose ø

8392.200 8392.401 8392.402

/ 12m (995.312) 17m (995.317)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.320) 25m (996.325)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.515) 20m (997.520) 15m (998.515) / 30m (996.330)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

/ 30m (997.530) 40m (997.540) 20m (998.520) 30m (998.530) / 40m (996.340) 50m (996.350) 60m (996.360)

without hose 3/4” 3/4” 1” 1” without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,200

8434.200 8432.401 8432.402

S. 530

8534.200 8532.401 8532.402

S. 540

8544.200 8542.401 8542.402 8542.403 8544.205 8542.406

S. 560

Connection inlet outlet

Article

8564.200 8562.401 8562.403 8562.404 8562.405 8564.206 8562.407 8562.408 8562.409

F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 1/2”G M 1/2”G

from kg 11 to 18

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 14 to 24

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G M 1”G F 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 30 to 80

The same models, swivelling version, on page 373

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540 S. 560

A 186 186 203 300 488

B 140 140 153 218 399

C 196 196 220 228 238

D 226 226 258 268 272

E 110 115 115 190 368

F 400 460 550 550 522

G ø 390 ø 420 ø 510 ø 510 ø 510

H 410 460 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

372 372

21-06-2006

16:28

Pagina 372

PAINTED SWIVELLING HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Oil and similar 150 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8380.400 8380.401 8380.402

/ 12m (995.312) 17m (995.317)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.320) 25m (996.325)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.515) 20m (997.520) 15m (998.515) / 30m (996.330)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

8420.400 8420.401 8420.402

8520.400 8520.401 8520.402

8550.400 8550.401 8550.402 8550.403 8550.405 8550.406

F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 1/2”G M 1/2”G

from kg 12 to 19

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 15 to 25

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 20 to 43

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 370

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 373

373 373

STAINLESS STEEL SWIVELLING HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Oil and similar 150 bar

- AISI 304 stainless steel swivel joint - ”viton” seals

S. 380

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8382.200 8382.401 8382.402

/ 12m (995.312) 17m (995.317)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,050

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 20m (996.320) 25m (996.325)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.515) 20m (997.520) 15m (998.515) / 30m (996.330)

without hose 3/4” 3/4” 1” without hose 1/2”

No. 1 packing

m 3 0,120

8424.200 8422.401 8422.402

8524.200 8522.401 8522.402

8554.200 8552.401 8552.402 8552.403 8554.205 8552.406

F 1/2”G F 1/2”G F 1/2”G

F 3/8”-1/2”G M 1/2”G M 1/2”G

from kg 12 to 19

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 15 to 25

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 20 to 43

F 1”G F 1”G F 1”G F 1”G F 1/2”G F 1/2”G

F 1”G M 3/4”G M 3/4”G M 1”G F 1/2”G M 1/2”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 371

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

23-06-2006

18:11

Pagina 374

ENCLOSED HOSE REELS

374 374

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Oil and similar 150 bar

- carbon steel swivel joint - ”polyurethane” seals

FIXED S. 450

Article

Hose length

Hose ø

8450.400 8450.401 8450.402

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,085

Connection inlet outlet F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 21 to 29

OVERALL DIMENSIONS 500 485

8440.400 8440.401 8440.402

/ 10m (996.310) 15m (996.315)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,085

180 236

236

SWIVELLING S. 440

217 177

485

217 140

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 22 to 30

OVERALL DIMENSIONS

208 140

The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

118 164

208 162 485

164

564 485

-55 0°

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The fixed hose reel installation system can be easily modified according to needs (see instructions on page 396).

+55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The swivelling hose reel installation system can be easily modified according to needs (see instructions on page 396).

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 375

CATALOGO LIST 217 pag 361-418 GB ok

376 376

21-06-2006

16:28

Pagina 376

HYDRAULIC MOTOR-OPERATED HOSE REELS Hose reel with rewinding by hydraulic motor, hoses in black synthetic rubber and galvanised steel fittings - carbon steel swivel joint - “polyurethane” seals

Oil and similar 150 bar

S. 617

S. 637

Article

Hose length

Hose ø

8617.400 8617.401 8617.402 8617.403 8617.404 8617.405 8617.406 8617.407 8617.408

/ 30m (996.330) 40m (996.340) 50m (996.350) 15m (997.515) 20m (997.520) 30m (997.530) 15m (998.515) 20m (998.520)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

/ 60m (996.360) 70m (996.370) 80m (996.380) 90m (996.390) 100m (996.3100) 40m (997.540) 50m (997.550) 60m (997.560) 30m (998.530) 40m (998.540)

without hose 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,370

8637.400 8637.401 8637.402 8637.403 8637.404 8637.405 8637.406 8637.407 8637.408 8637.409 8637.410

The hydraulic motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 55 to 74

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 75 to 118

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 617 S. 637

E F G H I L M D C B A 283 185 140 130 310 360 220 463 692 570 621 467 370 140 130 310 360 400 649 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 377

377 377

AIR MOTOR-OPERATED HOSE REELS Hose reel with rewinding by air motor, hoses in black synthetic rubber and galvanised steel fittings - carbon steel swivel joint - “polyurethane” seals

Oil and similar 150 bar

S. 618

S. 638

Article

Hose length

Hose ø

8618.400 8618.401 8618.402 8618.403 8618.404 8618.405 8618.406 8618.407 8618.408

/ 30m (996.330) 40m (996.340) 50m (996.350) 15m (997.515) 20m (997.520) 30m (997.530) 15m (998.515) 20m (998.520)

without hose 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

/ 60m (996.360) 70m (996.370) 80m (996.380) 90m (996.390) 100m (996.3100) 40m (997.540) 50m (997.550) 60m (997.560) 30m (998.530) 40m (998.540)

without hose 1/2” 1/2” 1/2” 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,370

8638.400 8638.401 8638.402 8638.403 8638.404 8638.405 8638.406 8638.407 8638.408 8638.409 8638.410

The air motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 51 to 78

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 71 to 122

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 618 S. 638

E F G H I L M D C B A 283 185 140 130 310 360 220 555 692 570 621 467 370 140 130 310 360 400 740 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 378

PAINTED FIXED HOSE REELS

378 378

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Grease 600 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 390

S. 430

Hose length

Hose ø

8390.500 8390.501 8390.502

/ 12m (993.511) 16m (993.516)

without hose 1/4” 1/4”

No. 1 packing

m 3 0,050

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 20m (995.720) 25m (995.725)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 30m (995.730)

without hose 3/8”

No. 1 packing

m 3 0,120

8430.500 8430.501 8430.502 8430.505 8430.506

S. 530

8530.500 8530.501 8530.502

S. 540

Connection inlet outlet

Article

8540.500 8540.501

F 3/8”G F 3/8”G F 3/8”G

F 3/8”G M 1/4”G M 1/4”G

from kg 11 to 18

F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

from kg 14 to 24

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G

from kg 19 to 42

F 3/8”G F 3/8”G

F 1/2”G M 1/4”G

from kg 24 to 40

stessi modelli, maversion, orientabili vedi pag. Per Theavere sameglimodels, swivelling on page 380 XX

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

A 1

Art. S. 390 S. 430 S. 530 S. 540

A 186 186 203 300

B 140 140 153 218

C 196 196 220 228

D 226 226 258 268

E 110 115 115 190

F 400 460 550 550

G ø 390 ø 420 ø 510 ø 510

H 410 460 560 573

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 379

379 379

STAINLESS STEEL FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Grease 600 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 390

S. 430

Hose length

Hose ø

8392.500 8392.501 8392.502

/ 12m (993.511) 16m (993.516)

without hose 1/4” 1/4”

No. 1 packing

m 3 0,050

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 20m (995.720) 25m (995.725)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 30m (995.730)

without hose 3/8”

No. 1 packing

m 3 0,120

8432.500 8432.501 8432.502 8432.505 8432.506

S. 530

8532.500 8532.501 8532.502

S. 540

Connection inlet outlet

Article

8542.500 8542.501

F 3/8”G F 3/8”G F 3/8”G

F 3/8”G M 1/4”G M 1/4”G

from kg 11 to 18

F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

from kg 14 to 24

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G

from kg 19 to 42

F 3/8”G F 3/8”G

F 1/2”G M 1/4”G

from kg 24 to 40

stessi modelli, maversion, orientabili vedi pag. Per Theavere sameglimodels, swivelling on page 380 XX

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

D C

F G

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The adjustable arms can be easily repositioned according to needs (see page 396).

A 1

Art. S. 390 S. 430 S. 530 S. 540

A 186 186 203 300

140 140 153 218

196 196 220 228

226 226 258 268

110 115 115 190

400 460 550 550

ø 390 ø 420 ø 510 ø 510

410 460 560 573

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 380

PAINTED SWIVELLING HOSE REELS

380 380

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Grease 600 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 380

S. 420

S. 520

Hose length

Hose ø

8380.500 8380.501 8380.502

/ 12m (993.511) 16m (993.516)

without hose 1/4” 1/4”

No. 1 packing

m 3 0,050

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 20m (995.720) 25m (995.725)

without hose 3/8” 3/8”

No. 1 packing

m 3 0,065

/ 30m (995.730)

without hose 3/8”

No. 1 packing

m 3 0,120

8420.500 8420.501 8420.502 8420.505 8420.506

8520.500 8520.501 8520.502

F 3/8”G F 3/8”G F 3/8”G

F 3/8”G M 1/4”G M 1/4”G

from kg 12 to 19

F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

from kg 15 to 25

F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G

from kg 20 to 43

S. 550 8550.500 8550.501

Connection inlet outlet

Article

F 3/8”G F 3/8”G

F 1/2”G M 1/4”G

from kg 25 to 41

Adjustable support for hose reel S.540

The same models, fixed version, on page 378

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 381

STAINLESS STEEL SWIVELLING HOSE REELS

381 381

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Grease 600 bar

- carbon steel swivel joint - ”polyurethane” seals

S. 380

S. 420

S. 520

Connection inlet outlet

Article

Hose length

Hose ø

8382.500 8382.501 8382.502

/ 12m (993.511) 16m (993.516)

without hose 1/4” 1/4”

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,050

from kg 12 to 19

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 15 to 25

/ 20m (995.720) 25m (995.725)

without hose 3/8” 3/8”

F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 20 to 43

/ 30m (995.730)

without hose 3/8”

F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 25 to 41

8422.500 8422.501 8422.502 8422.505 8422.506

8522.500 8522.501 8522.502

F 3/8”G M 1/4”G M 1/4”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

F 1/2”G M 1/4”G M 1/4”G

* S. 550

8552.500 8552.501

F 1/2”G M 1/4”G

Adjustable support for hose reel S.540

The same models, fixed version, on page 379

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 380 S. 420 S. 520 S. 550

A 184 208 228 300

B 146 162 182 218

C 106 118 154 226

D 144 164 200 268

E 110 115 115 190

F 400 460 560 560

G ø 390 ø 420 ø 510 ø 510

H 484 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 382

ENCLOSED HOSE REELS

382 382

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Grease 600 bar

- carbon steel swivel joint - ”polyurethane” seals

FIXED S. 450

Article

Hose length

Hose ø

8450.500 8450.501 8450.502 8450.505 8450.506

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

No. 1 packing

m 3 0,085

Connection inlet outlet F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

from kg 21 to 29

OVERALL DIMENSIONS 500 485

8440.500 8440.501 8440.502 8440.505 8440.506

/ 12m (993.512) 18m (993.518) 10m (995.710) 15m (995.715)

without hose 1/4” 1/4” 3/8” 3/8”

No. 1 packing

m 3 0,085

180 236

236

SWIVELLING S. 440

217 177

485

217 140

F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

F 1/2”G M 1/4”G M 1/4”G M 1/4”G M 1/4”G

from kg 22 to 30

OVERALL DIMENSIONS 208 140

The template supplied, facilitates drilling of the holes and therefore hose reel fixing.

118 164

208 162 485

164

564 485

-55 0°

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

The fixed hose reel installation system can be easily modified according to needs (see instructions on page 396).

+55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The swivelling hose reel installation system can be easily modified according to needs (see instructions on page 396).

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 383

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 384

HYDRAULIC MOTOR-OPERATED HOSE REELS

384 384

Hose reel with rewinding by hydraulic motor, hoses in black synthetic rubber and galvanised steel fittings - carbon steel swivel joint - “polyurethane” seals

Grease 400 bar

S. 617

S. 637

Article

Hose length

Hose ø

8617.500 8617.501 8617.502 8617.503

/ 30m (996.730) 40m (996.740) 50m (996.750)

without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,270

/ 60m (996.760) 70m (996.770) 80m (996.780) 90m (996.790) 100m (996.7100)

without hose 1/2” 1/2” 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,370

8637.500 8637.501 8637.502 8637.503 8637.504 8637.505

The hydraulic motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet F 1”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 1/2”G M 1/2”G M 1/2”G

from kg 55 to 86

F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 75 to 137

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 617 S. 637

A B C D E F G H I L M 283 185 140 130 310 360 220 463 692 570 621 467 370 140 130 310 360 400 649 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 385

AIR MOTOR-OPERATED HOSE REELS

385 385

Hose reel with rewinding by air motor, hoses in black synthetic rubber and galvanised steel fittings - carbon steel swivel joint - “polyurethane” seals

Grease 400 bar

S. 618

S. 638

Article

Hose length

Hose ø

8618.500 8618.501 8618.502 8618.503

/ 30m (996.730) 40m (996.740) 50m (996.750)

without hose 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,270

/ 60m (996.760) 70m (996.770) 80m (996.780) 90m (996.790) 100m (996.7100)

without hose 1/2” 1/2” 1/2” 1/2” 1/2”

No. 1 packing

m 3 0,370

8638.500 8638.501 8638.502 8638.503 8638.504 8638.505

The air motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet F 1”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 1/2”G M 1/2”G M 1/2”G

from kg 51 to 82

F 1”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G F 1/2”G

F 1”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G M 1/2”G

from kg 71 to 133

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 618 S. 638

A B C D E F G H I L M 283 185 140 130 310 360 220 555 692 570 621 467 370 140 130 310 360 400 740 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 386

PAINTED FIXED HOSE REELS

386 386

Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Diesel oil 10 bar

- brass swivel joint - ”viton” seals

S. 530

S. 540

Hose length

Hose ø

8530.100 8530.601 8530.602

/ 20m (996.820) 25m (996.825)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.815) 20m (997.820) 15m (998.815)

without hose 3/4” 3/4” 1”

No. 1 packing

m 3 0,120

/ 30m (997.830) 35m (997.835) 40m (997.840) 20m (998.820) 30m (998.830)

without hose 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,200

8540.100 8540.601 8540.602 8540.603

S. 560

Connection inlet outlet

Article

8560.100 8560.601 8560.602 8560.603 8560.604 8560.605

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 1”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing. E

The adjustable arms can be easily repositioned according to needs (see page 396).

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

F G

Art. S. 530 S. 540 S. 560

A 203 300 488

B 153 218 399

C 220 228 238

D 258 268 272

E 115 190 368

F 550 550 522

G ø 510 ø 510 ø 510

H 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 387

387 387

STAINLESS STEEL FIXED HOSE REELS Hose reel with hoses in black synthetic rubber and galvanised steel fittings

Diesel oil 10 bar

- brass swivel joint - ”viton” seals

S. 530

S. 540

Hose length

Hose ø

8532.100 8532.601 8532.602

/ 20m (996.820) 25m (996.825)

without hose 1/2” 1/2”

No. 1 packing

m 3 0,065

/ 15m (997.815) 20m (997.820) 15m (998.815)

without hose 3/4” 3/4” 1”

No. 1 packing

m 3 0,120

/ 30m (997.830) 35m (997.835) 40m (997.840) 20m (998.820) 30m (998.830)

without hose 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,200

8542.100 8542.601 8542.602 8542.603

S. 560

Connection inlet outlet

Article

8562.100 8562.601 8562.602 8562.603 8562.604 8562.605

F 1/2”G F 1/2”G F 1/2”G

F 1/2”G M 1/2”G M 1/2”G

from kg 19 to 42

F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 1”G

from kg 24 to 40

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 30 to 80

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing. E

The adjustable arms can be easily repositioned according to needs (see page 396).

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

F G

Art. S. 530 S. 540 S. 560

A 203 300 488

B 153 218 399

C 220 228 238

D 258 268 272

E 115 190 368

F 550 550 522

G ø 510 ø 510 ø 510

H 560 573 578

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 388

HYDRAULIC MOTOR-OPERATED HOSE REELS

388 388

Hose reel with rewinding by hydraulic motor, hoses in black synthetic rubber and galvanised steel fittings - carbon steel swivel joint - “viton” seals

Diesel oil 10 bar

S. 617

S. 637

Connection inlet outlet

Article

Hose length

Hose ø

8617.600 8617.601 8617.602 8617.603 8617.604 8617.605 8617.606 8617.607

/ 15m (997.815) 20m (997.820) 30m (997.830) 15m (998.815) 20m (998.820) 15m (9910.315) 10m (9911.310)

without hose 3/4” 3/4” 3/4” 1” 1” 1.1/4” 1.1/2”

F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G

No. 1 packing

m 3 0,270

from kg 55 to 86

/ 40m (997.840) 50m (997.850) 60m (997.860) 30m (998.830) 40m (998.840) 20m (9910.320) 25m (9910.325) 30m (9910.330) 15m (9911.315) 20m (9911.320)

without hose 3/4” 3/4” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/4” 1.1/2” 1.1/2”

F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G F 1.1/2”G

No. 1 packing

m 3 0,370

from kg 75 to 114

8637.600 8637.601 8637.602 8637.603 8637.604 8637.605 8637.606 8637.607 8637.608 8637.609 8637.610

The hydraulic motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

F 1.1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G M 1.1/4”G M 1.1/2”G

F 1.1/2”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G M 1.1/4”G M 1.1/4”G M 1.1/4”G M 1.1/2”G M 1.1/2”G

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 617 S. 637

A B C D E F G H I L M 283 185 140 130 310 360 220 492 692 570 621 467 370 140 130 310 360 400 677 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 389

AIR MOTOR-OPERATED HOSE REELS

389 389

Hose reel with rewinding by air motor, hoses in black synthetic rubber and galvanised steel fittings - brass swivel joint - ”viton” seals

Diesel oil 10 bar

S. 618

S. 638

Article

Hose length

Hose ø

8618.100 8618.601 8618.602 8618.603 8618.604 8618.605

/ 15 m (997.815) 20 m (997.820) 30 m (997.830) 15 m (998.815) 20 m (998.820)

without hose 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,270

/ 40m (997.840) 50m (997.850) 60m (997.860) 30m (998.830) 40m (998.840)

without hose 3/4” 3/4” 3/4” 1” 1”

No. 1 packing

m 3 0,370

8638.100 8638.601 8638.602 8638.603 8638.604 8638.605

The air motor-operated hose reels are designed for applications requiring very sturdy equipment, with a powerful rewinding system.

Connection inlet outlet F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 51 to 82

F 1”G F 1”G F 1”G F 1”G F 1”G F 1”G

F 1”G M 3/4”G M 3/4”G M 3/4”G M 1”G M 1”G

from kg 71 to 133

OVERALL DIMENSIONS A B C

I L

F E D

Their specific qualities enable the use of large diameter hoses for rapid transfer with high deliveries. H

Note: For detailed hose reel fixing instructions refer to page 398

Art. S. 618 S. 638

A B C D E F G H I L M 283 185 140 130 310 360 220 555 692 570 621 467 370 140 130 310 360 400 740 692 570 621

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 390

PAINTED FIXED HOSE REELS

390 390

Hose reel with double hose Standard EN559, hoses in SBR/EPDM rubber and brass fittings. - brass swivel joint - ”viton” seals

Welding 20 bar

Complying with standard Atex 94/9

S. 430

Hose length

Hose ø

8430.700 8430.701 8430.702

/ 13m (973.913) 12m (974.912)

without hose 2x1/4”-2x6 2x5/16”-2x8

M 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 14 to 24

/ 17m (973.917) 20m (973.920) 15m (974.915) 20m (974.920) 15m (975.915)

without hose 2x1/4”-2x6 2x1/4”-2x6 2x5/16”-2x8 2x5/16”-2x8 2x3/8”-2x9

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 19 to 42

/ 25m (973.925) 30m (973.930) 35m (973.935) 25m (974.925) 30m (974.930) 35m (974.935) 20m (975.920) 25m (975.925) 27m (975.927)

without hose 2x1/4”-2x6 2x1/4”-2x6 2x1/4”-2x6 2x5/16”-2x8 2x5/16”-2x8 2x5/16”-2x8 2x3/8”-2x9 2x3/8”-2x9 2x3/8”-2x9

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 24 to 40

8530.700 8530.701 8530.702 8530.703 8530.704 8530.705

S. 530

8540.700 8540.701 8540.702 8540.703 8540.704 8540.705 8540.706 8540.707 8540.708 8540.709

S. 540

Connection inlet outlet

Article

M 3/8”G F 3/8”G F 3/8”G

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing. E

The adjustable arms can be easily repositioned according to needs (see page 396).

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

F G

Art. S. 430 S. 530 S. 540

A 186 203 300

B 140 153 218

C 196 220 228

D 226 258 268

E 115 115 190

F 460 550 550

G ø 420 ø 510 ø 510

H 460 560 573

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 391

391 391

PAINTED SWIVELLING HOSE REELS Hose reel with double hose Standard EN559, hoses in SBR/EPDM rubber and brass fittings. - brass swivel joint - ”viton” seals

Welding 20 bar

Complying with standard Atex 94/9

S. 420

S. 520

* S. 550

Connection inlet outlet

Article

Hose length

Hose ø

8420.700 8420.701 8420.702

/ 13m (973.913) 12m (974.912)

without hose 2x1/4”-2x6 2x5/16”-2x8

M 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 15 to 25

/ 17m (973.917) 20m (973.920) 15m (974.915) 20m (974.920) 15m (975.915)

without hose 2x1/4”-2x6 2x1/4”-2x6 2x5/16”-2x8 2x5/16”-2x8 2x3/8”-2x9

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,065

from kg 20 to 43

/ 25m (973.925) 30m (973.930) 35m (973.935) 25m (974.925) 30m (974.930) 35m (974.935) 20m (975.920) 25m (975.925) 27m (975.927)

without hose 2x1/4”-2x6 2x1/4”-2x6 2x1/4”-2x6 2x5/16”-2x8 2x5/16”-2x8 2x5/16”-2x8 2x3/8”-2x9 2x3/8”-2x9 2x3/8”-2x9

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

No. 1 packing

m 3 0,120

from kg 25 to 41

8520.700 8520.701 8520.702 8520.703 8520.704 8520.705

8550.700 8550.701 8550.702 8550.703 8550.704 8550.705 8550.706 8550.707 8550.708 8550.709

M 3/8”G F 3/8”G F 3/8”G

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

M 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G F 3/8”G

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 420 S. 520 S. 520

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

392 392

16:28

Pagina 392

PAINTED FIXED HOSE REELS Hose reel with orange hose Standard EN559 and brass fittings.

LPG and natural gas 20 bar

- brass swivel joint - ”viton” seals

Complying with standard Atex 94/9

S. 430

S. 530

Hose length

8430.800 8430.801 8430.802 8430.803 8430.804

/ 15m (974.1015) 20m (974.1020) 12m (975.1012) 18m (975.1018)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,065

/ 24m (974.1024) 28m (974.1028) 22m (975.1022) 27m (975.1027)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,065

/ 30m (974.1030) 30m (975.1030)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,120

8530.800 8530.801 8530.802 8530.803 8530.804

S. 540

Connection inlet outlet

Article

8540.800 8540.801 8540.802

Hose ø

from kg 14 to 24

from kg 19 to 42

from kg 24 to 40

OVERALL DIMENSIONS The template supplied, facilitates drilling of the holes and therefore hose reel fixing. E

The adjustable arms can be easily repositioned according to needs (see page 396).

D C

The quick coupling support (see page 394) that facilitates installation in battery is available by request.

F G

Art. S. 430 S. 530 S. 540

A 186 203 300

B 140 153 218

C 196 220 228

D 226 258 268

E 115 115 190

F 460 550 550

G ø 420 ø 510 ø 510

H 460 560 573

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:28

Pagina 393

PAINTED SWIVELLING HOSE REELS

393 393

Hose reel with orange hose Standard EN559 and brass fittings.

LPG and natural gas 20 bar

- brass swivel joint - ”viton” seals

Complying with standard Atex 94/9

S. 420

S. 520

S. 550

Connection inlet outlet

Article

Hose length

8420.800 8420.801 8420.802 8420.803 8420.804

/ 15m (974.1015) 20m (974.1020) 12m (975.1012) 18m (975.1018)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,065

/ 24m (974.1024) 28m (974.1028) 22m (975.1022) 27m (975.1027)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,065

/ 30m (974.1030) 30m (975.1030)

without hose M 3/8”G-Sx M 3/8”G-Sx 8x15 F 3/8”G-Sx F 3/8”G-Sx 10x17 F 3/8”G-Sx F 3/8”G-Sx

No. 1 packing

m 3 0,120

8520.800 8520.801 8520.802 8520.803 8520.804

8550.800 8550.801 8550.802

Hose ø

from kg 15 to 25

from kg 20 to 43

from kg 25 to 41

Adjustable support for hose reel S.540

OVERALL DIMENSIONS

-55 +55

The quick coupling adjustable support facilitates hose reel installation and enables 55° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws.

The adjustable arms can be easily repositioned according to needs (see page 396).

F G

D C

0°

Art. S. 420 S. 520 S. 550

A 208 228 300

B 162 182 218

C 118 154 226

D 164 200 268

E 115 115 190

F 460 560 560

G ø 420 ø 510 ø 510

H 541 642 702

CATALOGO LIST 217 pag 361-418 GB ok

26-06-2006

14:23

Pagina 394

SUPPORTS FOR FIXED HOSE REELS

394 394

QUICK FIT WALL BRACKETS SUPPLIED ON REQUEST Art. 843001

186 152

264 294

Fixed support in steel for fixed hose reels in painted steel series 390 - 430

Art. 843002 Art. 843002

Fixed support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 390 - 430

Art. 845001 Fixed support in steel for fixed enclosed hose reels in painted steel series 450

217 187

267 292

Art. 843001

Art. 845001 Art. 853001

302 338

Fixed support in steel for fixed hose reels in painted steel series 530

203 160

Art. 853002 Art. 853001 Art. 853002

Fixed support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 530

Art. 854001

300 220

300 340

Fixed support in steel for fixed hose reels in painted steel series 540

Art. 854002 Art. 854001 Art. 854002

Fixed support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 540

Art. 856001

Art. 856002 Art. 856001 Art. 856002

Fixed support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 560

2 1

488 399

313 347

Fixed support in steel for fixed hose reels in painted steel series 560

3 4

The quick coupling support that facilitates hooking of the single hose reel and optimises its installation in battery (i.e. with several hose reels side by side) is available by request (see instructions on page 397).

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 395

ADJUSTABLE SUPPORTS FOR FIXED HOSE REELS

395 395

QUICK FIT SWIVEL BRACKETS SUPPLIED ON REQUEST Art. 843005 118 165

Adjustable support in steel for fixed hose reels in painted steel series 390 - 430 162 208

Art. 843006

Adjustable support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 390 - 430

Art. 843005

Art. 843006 Art. 845005 118 165

Adjustable support in steel for fixed enclosed hose reels in painted steel series 450 162 208

Art. 845005 Art. 853005 118 165

Adjustable support in steel for fixed hose reels in painted steel series 530 162 208

Art. 853006

Adjustable support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 530

Art. 853005

Art. 853006

Adjustable support in steel for fixed hose reels in painted steel series 540

Art. 854006

226 268

Art. 854005

218 300

129

Adjustable support in AISI 304 stainless steel for fixed hose reels in stainless steel and Aisi 304 stainless steel series 540

Art. 854005 Art. 854006

4 2 1 3

The quick coupling adjustable support facilitates hose reel installation and enables 40° rotation to the right or left or locking in fixed positioned at 0° by means of clamping with two screws is available by request.

CATALOGO LIST 217 pag 361-418 GB ok

396 396

21-06-2006

16:29

Pagina 396

HOSE REEL INSTALLATION

The hose reels are supplied with adjustable arms fitted as shown in the photo. The same arms can be easily repositioned as required.

Wall installation with hose downwards. Ideal for use with drip-catcher tray.

Wall installation with hose downwards. From the standard position turn the arms upwards, then turn the hose reel upside-down (see figure). Ideal for use of swivelling hose reels.

Wall installation with horizontal hose position. Ideal for fixing at medium/low heights.

Bench installation

Ceiling installation

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 397

INSTALLATION IN BATTERY 20 186

Series 390 - 430

186

20 203

Series 530

203

Series 540

300 0 300

Series 560

488 0 488

ACCESSORIES FOR HOSE REEL Art. 88650 Latch mechanism protective cover rack side for hose reels series 420 - 430

Art. 88651 Latch mechanism protective cover rack side for hose reels series 520 - 530 - 540 - 550 - 560

Art. 88650 Art. 88651

397 397

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 398

MOTOR-OPERATED HOSE REELS

398 398

INSTALLATION OF HYDRAULIC MOTOR AND AIR MOTOR-OPERATED HOSE REELS

Fig. 1

Fig. 2

Fig. 3

The hose reel is normally supplied with the arms in the position of Fig. 1 suitable for bench or wall application. To enable wall application with a different position of the arms or ceiling mounting, the following modifications must be carried out from the starting position: - to change to the position in Fig. 2 turn the arms 180° and turn the hose reel upside-down. - to change to the position in Fig. 3 turn the arms 90°.

WALL MOUNTING OF HYDRAULIC AND AIR MOTOR-OPERATED HOSE REELS

After choosing the ideal position, checking the consistency and thickness of the wall, marking the holes for the plugs (see template supplied with the hose reel) and making sure they do not interfere with hydraulic pipes or electrical wires, proceed with drilling. Fix the plugs in the wall and insert the hose reel in the special seats. Tighten the 4 fixing nuts.

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 399

HYDRAULIC OR AIR MOTOR-OPERATED HOSE REELS

399 399

FITTING OF HOSE ON HYDRAULIC OR AIR MOTOR-OPERATED HOSE REELS WITH 1” CONNECTOR

F Before carrying out the operation, make sure the hose reel drum is locked by means of the parking brake F - screw one Nipple N on the outlet elbow G -apply the hose on Nipple N

FITTING OF HOSE ON HYDRAULIC MOTOR-OPERATED HOSE REELS WITH 1.1/2” CONNECTOR

G G

F Before carrying out the operation, make sure the hose reel drum is locked by means of the parking brake F - remove the outlet elbow G - screw one Nipple N on the outlet elbow G - apply the hose on Nipple N - refit the outlet elbow G with the assembled parts

HYDRAULIC AND AIR MOTOR-OPERATED HOSE REEL FEED

The hydraulic motor-operated hose reels are fed, by means of a control, by an electric control unit (control and control unit not supplied)

The air motor-operated hose reels are fed, by means of a control, with direct connection to the compressed air system (control not supplied)

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 400

HOSE STOP

400 400

Adapters for hoses of different diameter (Supplied with the hose stop)

UNIVERSAL HOSE STOP Comes with all hose reels supplied without hose, complete with adapters for using hoses of different diameter.

Article KR7101

painted

380

390

KR7201

stainless steel 380

390

KR8102

painted

420

430

440

450

520

530

stainless steel 420

430

440

450

520

530

KR8104

ø Reductions

Series 430 GAS

420 GAS

530 GAS

520 GAS

540 GAS

550 GAS

12 - 14 - 16 mm 12 - 14 - 16 mm 14 - 17 - 19 mm

14 - 17 - 19 mm

KR8807

painted

550 outlet 1”

540 outlet 1”

560 outlet 1”

25 - 34,5 mm

KR8411

painted

550 outlet 1/2”

540 outlet 1/2”

560 outlet 1/2”

19 mm

KR8811

stainless steel 550 outlet 3/4”

540 outlet 1”

560 outlet 1”

25 - 34,5 mm

KR8508

stainless steel 550 outlet 1/2”

540 outlet 1/2”

560 outlet 1/2”

19 mm

KR8907

painted

420 welding

430 welding

520 welding

530 welding

550 welding

540 welding

12 - 14 - 15 - 16 mm

CATALOGO LIST 217 pag 361-418 GB ok

26-06-2006

14:22

Pagina 401

HOSE REEL CAPACITY

401 401

To establish the capacity of a hose reel (max. length of hose to be wound) it is necessary to know the following data: - hose reel spring rewinding capacity - external diameter of hose to be used

INDUSTRIAL SERIES (open and enclosed) ø 12 mm

max. 22 m

ø 14 mm

max. 20 m

ø 16 mm

max. 18 m

ø 17 mm

max. 21 m

ø 19,5 mm

max. 16 m

ø 22 mm

max. 14 m

ø 18,5 mm

max. 28 m

ø 20 mm

max. 26 m

ø 22 mm

max. 24 m

Series 380 Series 390

Series 420 Series 430 Series 440 Series 450

ø 22 mm

max. 30 m

ø 28 mm

max. 22 m

ø 34 mm

max. 17 m

ø 22 mm

max. 60 m

ø 30 mm

max. 40 m

ø 35 mm

max. 30 m

Series 540-550 outlet 1/2”

Series 540-550 outlet 1”

Series 560 outlet 1/2”

Series 560 outlet 1”

Series 520 Series 530

INDUSTRIAL SERIES WITH DOUBLE HOSE FOR WELDING ø 1/4” X 1/4”

max. 13 m

ø 5/16” X 5/16”

max. 12 m

ø 3/8” X 3/8”

max. 10 m

ø 1/4” X 1/4”

max. 22 m

ø 5/16” X 5/16”

max. 20 m

ø 3/8” X 3/8”

max. 15 m

Series 420 Series 430

ø 1/4” X 1/4”

max. 37 m

ø 5/16” X 5/16”

max. 35 m

ø 3/8” X 3/8”

max. 27 m

Series 540 Series 550

Series 520 Series 530

INDUSTRIAL SERIES FOR GAS ø 15 mm

max. 20 m

ø 17 mm

max. 18 m

ø 15 mm

max. 28 m

ø 17 mm

max. 27 m

Series 420 Series 430

ø 15 mm

max. 30 m

ø 17 mm

max. 30 m

Series 540 Series 550

Series 520 Series 530

INDUSTRIAL MOTOR-OPERATED SERIES ø 1/2”

max. 50 m

ø 3/4”

max. 30 m

ø 1”

max. 20 m

ø 3/4”

max. 30 m

ø 1”

max. 20 m

ø 1.1/4”

max. 15 m

ø 1.1/2”

max. 10 m

Series 617 Series 618 outlet 1”

Series 8617.600 outlet 1.1/2”

ø 1/2”

max. 100 m

ø 3/4”

max. 60 m

ø 1”

max. 40 m

ø 3/4”

max. 60 m

ø 1”

max. 40 m

ø 1.1/4”

max. 30 m

ø 1.1/2”

max. 20 m

Series 637 Series 638 outlet 1”

Series 8637.600 outlet 1.1/2”

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 402

The range of hoses offered by RAASM for its hose reels is in line with company's quality standards and guarantees excellent performance in the applications with the pressures specified in the catalogue. For conditions different from those recommended, RAASM is available to appraise every aspect of the application context (compatibility of the materials used with the fluid, temperature of use, working pressure, etc.) together with the customer for identifying the right hose for each specific case.

The hoses to be assembled on the hose reels must be suitable for the working pressures specified on the label.

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 403

HOSES - TECHNICAL DATA

403 403

HOSE REEL OUTLET HOSE CONNECTIONS FITTINGS

Art. 66893 Art. 38072 Art. 38071 Art. 33114 Art. 33117 Art. 33119 Art. 33116 Art. 33270 Art. 33271 Art. 33272 Art. 33273 Art. 33274

Nipple in carbon steel 1/2”G x 1/4”G M/M Nipple in carbon steel 1/2”G x 3/8”G M/M Nipple in carbon steel 1/2”G x 1/2”G M/M Nipple in carbon steel 1”G x 1/2”G M/M Nipple in carbon steel 3/4”G x 3/4”G M/M Nipple in carbon steel 1”G x 3/4”G M/M Nipple in carbon steel 1”G x 1”G M/M Nipple in carbon steel 1.1/2”G x 3/4”G M/M Nipple in carbon steel 1.1/2”G x 1”G M/M Nipple in carbon steel 1.1/2”G x 1.1/4”G M/M Nipple in carbon steel 1.1/2”G x 1.1/4”G M/F Nipple in carbon steel 1”G x 1/2”G M/F

Art. 38120 Art. 38121 Art. 33130 Art. 33128 Art. 33129

Nipple in AISI 304 stainless steel 1/2”G x 3/8”G M/M Nipple in AISI 304 stainless steel 1/2”G x 1/2”G M/M Nipple in AISI 304 stainless steel 3/4”G x 3/4”G M/M Nipple in AISI 304 stainless steel 1”G x 3/4”G M/M Nipple in AISI 304 stainless steel 1”G x 1”G M/M

Art. 38120 Art. 38121 Art. 33130 Art. 33128 Art. 33129 HOSE REEL OUTLET HOSE CONNECTION

Series 380 - 390

Series 420 - 430 - 520 - 530

Series 440 - 450

Series 540 - 550 - 560 outlet 1”

Series 540 - 550 - 560 outlet 1/2”

Series Welding - Natural Gas

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 404

HOSES - TECHNICAL DATA

404 404

HOSE REEL - SYSTEMS EQUIPMENT CONNECTION HOSES TABLE ARTICLE 996.806 998.806 986.106 988.106 9911.306 971.102 975.902 975.1002 993.201 993.202 995.206 986.406 988.406 996.406 998.406 996.306 996.301 996.302 996.304 997.505 998.506 998.501 998.502 985.606 995.506 995.606 985.906 995.806 995.906 996.706 993.502 993.504 995.706 995.701 995.702

HOSE LENGTH 0,6m 0,6m 0,6m 0,6m 0,6m 1,5m 1,5m 1,5m 1m 2m 0,6m 0,6m 0,6m 0,6m 0,6m 0,6m 1m 2m 4m 5m 0,6m 1m 2m 0,6m 0,6m 0,6m 0,6m 0,6m 0,6m 0,6m 1,5m 4m 0,6m 1m 2m

HOSE CHARACTERISTICS black rubber black rubber hygienic cover hygienic cover black rubber Polyurethane SBR/EPDM NBR/PVC black rubber black rubber black rubber hygienic cover hygienic cover hygienic cover hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber hygienic cover black rubber hygienic cover hygienic cover black rubber hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber

HOSE Ø

DIMENSIONS

1/2" 1" 1/2" 1" 1.1/2" 5/16" 2x3/8" 3/8" 1/4" 1/4" 3/8" 1/2" 1" 1/2" 1" 1/2" 1/2" 1/2" 1/2" 3/4" 1" 1" 1" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/4" 1/4" 3/8" 3/8" 3/8"

13 x 20 25 x 35 13 x 23 25 x 37 38 x 50 8x12 9 + 9x16 10 x 17 6,4 x13 6,4 x13 9,5 x 16 12,7 x 18,5 25,4 x 31,5 12,7 x 18,5 25,4 x 31,5 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 19 x 26,5 25,4 x 31,5 25,4 x 31,5 25,4 x 31,5 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 12,7 x 21,5 6,3 x 17,5 6,3 x 17,5 9,5 x 18 9,5 x 18 9,5 x 18

INLET

OUTLET

M 1/2"G F 1/2"G M 1"G F 1"G M 1/2"G F 1/2"G M 1"G F 1"G F 1.1/2"G M 1.1/2"G SNODO M 1/4"G F 3/8"G F 3/8"G F 3/8"G-Sx F 3/8"G-Sx M 1/4"G F 1/4"G M 1/4"G F 1/4"G M 3/8"G F 3/8"G M 1/2"G F 1/2"G M 1"G F 1"G M 1/2"G F 1/2"G M 1"G F 1"G M 1/2"G F 1/2"G M 1/2"G F 1/2"G F 1/2"G F 1/2"G M 1/2"G F 1/2"G M 3/4"G F 3/4"G M 1"G F 1"G M 1"G F 1"G M 1"G F 1"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 1/2"G F 1/2"G F 1/4"G F 1/4"G M 1/4"G F 1/4"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G

PRESSURE

UNIONS

10 bar 10 bar 10 bar 10 bar 10 bar 20 bar 20 bar 20 bar 20 bar 20 bar 20 bar 100 bar 100 bar 100 bar 100 bar 150 bar 150 bar 150 bar 150 bar 150 bar 150 bar 150 bar 150 bar 200 bar 200 bar 200 bar 400 bar 400 bar 400 bar 400 bar 600 bar 600 bar 600 bar 600 bar 600 bar

galvanised steel galvanised steel s/steel AISI 304 s/steel AISI 304 galvanised steel brass brass brass galvanised steel galvanised steel galvanised steel s/steel AISI 304 s/steel AISI 304 galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel s/steel AISI 304 galvanised steel galvanised steel s/steel AISI 304 galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel galvanised steel

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 405

HOSES - TECHNICAL DATA Air Water

20 bar Fittings Galvanised Steel

Water hot water

100 bar Fittings Galvanised Steel

ARTICLE 971.011 971.111 995.211 995.212 995.217 995.218 996.210 996.215 996.220 996.225 996.230 996.240 996.250 996.260 996.270 996.280 996.290 996.2100 997.215 997.220 997.230 997.240 997.250 997.260 998.215 998.220 998.230 998.240

ARTICLE 995.313 995.318 995.412 996.311 996.316 996.321 996.326 996.331 996.341 996.351 996.361 996.371 996.381 996.391 996.399 996.415 996.425 997.315 997.320 997.330 997.340 997.350 997.360 997.420 998.315 998.320 998.330 998.340

405 405

HOSE LENGTH 11m 11m 12m 12m 18m 18m 10m 15m 20m 25m 30m 40m 50m 60m 70m 80m 90m 100m 15m 20m 30m 40m 50m 60m 15m 20m 30m 40m

HOSE CHARACTERISTICS Polyurethane Polyurethane black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber

HOSE Ø

DIMENSIONS

INLET

OUTLET

1/4" 5/16" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1"

6x10 8x12 9,5 x 16 9,5 x 16 9,5 x 16 9,5 x 16 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 12,7 x 20 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 25,4 x 32,5 25,4 x 32,5 25,4 x 32,5 25,4 x 32,5

M 1/4"G M 1/4"G M 3/8"G F 3/8"G M 3/8"G F 3/8"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G F 1"G

M 1/4"G M 1/4"G M 3/8"G M 3/8"G M 3/8"G M 3/8"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G M 1"G

HOSE LENGTH 12m 17m 12m 10m 15m 20m 25m 30m 40m 50m 60m 70m 80m 90m 100m 15m 25m 15m 20m 30m 40m 50m 60m 20m 15m 20m 30m 40m

HOSE CHARACTERISTICS

HOSE Ø

DIMENSIONS

INLET

OUTLET

black rubber black rubber hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber hygienic cover hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber hygienic cover black rubber black rubber black rubber black rubber

3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1"

9,5 x 15 9,5 x 15 9,5 x 15 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 19 x 25 19 x 25 19 x 25 19 x 25 19 x 25 19 x 25 19 x 25 25,4 x 31,5 25,4 x 31,5 25,4 x 31,5 25,4 x 31,5

M 3/8"G M 3/8"G M 3/8"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G F 1"G

M 3/8"G M 3/8"G M 3/8"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G M 1"G

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

200 bar Fittings Galvanised Steel

Water Hot water

400 bar Fittings Galvanised Steel

Air Water Non toxic

10 bar Fittings Stainless steel AISI 304

Pagina 406

HOSES - TECHNICAL DATA

406 406

Water Hot water

16:29

ARTICLE

HOSE LENGTH

HOSE CHARACTERISTICS

HOSE Ø

DIMENSIONS

INLET

OUTLET

994.512 994.517 994.612 995.512 995.518 995.520 995.525 995.530 995.540 995.550 995.618 995.625 995.630

12m 17m 12m 12m 18m 20m 25m 30m 40m 50m 18m 25m 30m

black rubber black rubber hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber black rubber hygienic cover hygienic cover hygienic cover

5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

8 x 15 8 x 15 8 x 15 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17

M 3/8"G M 3/8"G M 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

ARTICLE

HOSE LENGTH 12m 17m 12m 12m 18m 20m 25m 30m 40m 50m 18m 25m 30m

HOSE CHARACTERISTICS black rubber black rubber hygienic cover black rubber black rubber black rubber black rubber black rubber black rubber black rubber hygienic cover hygienic cover hygienic cover

HOSE Ø

DIMENSIONS

INLET

OUTLET

5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

8 x 16 8 x 16 8 x 16 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5

M 3/8"G M 3/8"G M 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

HOSE LENGTH 10m 15m 20m 25m 30m 40m 50m 60m 15m 20m 30m 40m 15m 20m 30m

HOSE CHARACTERISTICS

HOSE Ø

DIMENSIONS

INLET

OUTLET

hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover

1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1"

13 x 23 13 x 23 13 x 23 13 x 23 13 x 23 13 x 23 13 x 23 13 x 23 19 x 30 19 x 30 19 x 30 19 x 30 25 x 37 25 x 37 25 x 37

F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G

M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G

994.712 994.717 994.812 995.812 995.818 995.820 995.825 995.830 995.840 995.850 995.918 995.925 995.930

ARTICLE 986.110 986.115 986.120 986.125 986.130 986.140 986.150 986.160 987.115 987.120 987.130 987.140 988.115 988.120 988.130

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 407

HOSES - TECHNICAL DATA

ARTICLE

HOSE LENGTH

986.410 986.415 986.420 986.425 986.430 986.440 986.450 986.460 987.415 987.420 987.430 987.440 988.415 988.420 988.430

Water Hot water

200 bar

Water Hot water

100 bar Fittings Stainless steel AISI 304

Fittings Stainless steel AISI 304

Water Hot water

400 bar Fittings Stainless steel AISI 304

407 407

HOSE Ø

DIMENSIONS

INLET

OUTLET

10m 15m 20m 25m 30m 40m 50m 60m 15m 20m 30m 40m 15m 20m 30m

HOSE CHARACTERISTICS hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover

1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 1" 1" 1"

12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 12,7 x 18,5 19 x 25 19 x 25 19 x 25 19 x 25 25,4 x 31,5 25,4 x 31,5 25,4 x 31,5

F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G

M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G

ARTICLE

HOSE LENGTH

HOSE CHARACTERISTICS

HOSE Ø

DIMENSIONS

INLET

OUTLET

985.612 985.618 985.620 985.625 985.630 985.640 985.650

12m 18m 20m 25m 30m 40m 50m

hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover

3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17 9,5 x 17

F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

ARTICLE

HOSE LENGTH

HOSE CHARACTERISTICS

HOSE Ø

DIMENSIONS

INLET

OUTLET

985.912 985.918 985.920 985.925 985.930 985.940 985.950

12m 18m 20m 25m 30m 40m 50m

hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover hygienic cover

3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"

9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5 9,5 x 17,5

F 3/8” G F 3/8” G F 3/8” G F 3/8” G F 3/8” G F 3/8” G F 3/8” G

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

150 bar Fittings Galvanised Steel

Grease

600 bar Fittings Galvanised Steel

Grease

400 bar Fittings Galvanised Steel

Pagina 408

HOSES - TECHNICAL DATA

408 408

Oil and allied products

16:29

ARTICLE 995.312 995.317 996.310 996.315 996.320 996.325 996.330 996.340 996.350 996.360 996.370 996.380 996.390 996.3100 997.515 997.520 997.530 997.540 997.550 997.560 998.515 998.520 998.530 998.540

ARTICLE 993.511 993.512 993.516 993.518 995.710 995.715 995.720 995.725 995.730

ARTICLE 996.730 996.740 996.750 996.760 996.770 996.780 996.790 996.7100

HOSE LENGTH 12m 17m 10m 15m 20m 25m 30m 40m 50m 60m 70m 80m 90m 100m 15m 20m 30m 40m 50m 60m 15m 20m 30m 40m

HOSE CHARACTERISTICS black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber

HOSE Ø

DIMENSIONS

INLET

OUTLET

3/8" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1"

9,5 x 17 9,5 x 17 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 12,7 x 19 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 19 x 26,5 25,4 x 35,5 25,4 x 35,5 25,4 x 35,5 25,4 x 35,5

M 3/8"G M 3/8"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G F 1"G

M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G M 1"G

HOSE LENGTH 12m 12m 16m 18m 10m 15m 20m 25m 30m

HOSE CHARACTERISTICS black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber

HOSE Ø

DIMENSIONS

INLET

OUTLET

1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 3/8"

6,3 x 17,5 6,3 x 17,5 6,3 x 17,5 6,3 x 17,5 9,5 x 18 9,5 x 18 9,5 x 18 9,5 x 18 9,5 x 18

M3/8"G F 1/4"G M3/8"G F 1/4"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

M 1/4"G M 1/4"G M 1/4"G M 1/4"G M 1/4"G M 1/4"G M 1/4"G M 1/4"G M 1/4"G

HOSE LENGTH 30m 40m 50m 60m 70m 80m 90m 100m

HOSE CHARACTERISTICS black rubber black rubber black rubber black rubber black rubber black rubber black rubber black rubber

HOSE Ø

DIMENSIONS

INLET

OUTLET

1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

12,7 x 21,5 12,7 x 21,5 12,7 x 21,5 12,7 x 21,5 12,7 x 21,5 12,7 x 21,5 12,7 x 21,5 12,7 x 21,5

F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G F 1/2” G

M 1/2” G M 1/2” G M 1/2” G M 1/2” G M 1/2” G M 1/2” G M 1/2” G M 1/2” G

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 409

HOSES - TECHNICAL DATA

Diesel oil

10 bar Fittings Galvanised Steel

Welding

20 bar EN 559 Fittings Brass

Lpg and Natural gas

20 bar EN 559 Fittings Brass

ARTICLE 996.820 996.825 997.815 997.820 997.830 997.835 997.840 997.850 997.860 998.815 998.820 998.830 998.840 9910.315 9910.320 9910.325 9910.330 9911.310 9911.315 9911.320

ARTICLE 973.913 973.917 973.920 973.925 973.930 973.935 974.912 974.915 974.920 974.925 974.930 974.935 975.915 975.920 975.925 975.927

ARTICLE 974.1015 974.1020 974.1024 974.1028 974.1030 975.1012 975.1018 975.1022 975.1027 975.1030

409 409

HOSE LENGTH 20m 25m 15m 20m 30m 35m 40m 50m 60m 15m 20m 30m 40m 15m 20m 25m 30m 10m 15m 20m

HOSE Ø

DIMENSIONS

INLET

OUTLET

1/2" 1/2" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 1" 1" 1" 1" 1.1/4" 1.1/4" 1.1/4" 1.1/4" 1.1/2" 1.1/2" 1.1/2"

13 x 20 13 x 20 19 x 27 19 x 27 19 x 27 19 x 27 19 x 27 19 x 27 19 x 27 25 x 35 25 x 35 25 x 35 25 x 35 32 x 44 32 x 44 32 x 44 32 x 44 38 x 50 38 x 50 38 x 50

F 1/2"G F 1/2"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 3/4"G F 1"G F 1"G F 1"G F 1"G M 1.1/4"G M 1.1/4"G M 1.1/4"G M 1.1/4"G M 1.1/2"G M 1.1/2"G M 1.1/2"G

M 1/2"G M 1/2"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 3/4"G M 1"G M 1"G M 1"G M 1"G M 1.1/4"G M 1.1/4"G M 1.1/4"G M 1.1/4"G M 1.1/2"G M 1.1/2"G M 1.1/2"G

HOSE LENGTH 13m 17m 20m 25m 30m 35m 12m 15m 20m 25m 30m 35m 15m 20m 25m 27m

HOSE CHARACTERISTICS SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM SBR/EPDM

HOSE Ø

DIMENSIONS

INLET

OUTLET

2x1/4" 2x1/4" 2x1/4" 2x1/4" 2x1/4" 2x1/4" 2x5/16" 2x5/16" 2x5/16" 2x5/16" 2x5/16" 2x5/16" 2x3/8" 2x3/8" 2x3/8" 2x3/8"

6,3 + 6,3x13 6,3 + 6,3x13 6,3 + 6,3x13 6,3 + 6,3x13 6,3 + 6,3x13 6,3 + 6,3x13 8 + 8x15 8 + 8x15 8 + 8x15 8 + 8x15 8 + 8x15 8 + 8x15 9 + 9x16 9 + 9x16 9 + 9x16 9 + 9x16

F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G F 3/8"G

HOSE LENGTH 15m 20m 24m 28m 30m 12m 18m 22m 27m 30m

HOSE CHARACTERISTICS NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC NBR/PVC

HOSE Ø

DIMENSIONS

INLET

OUTLET

5/16" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8" 3/8" 3/8" 3/8"

8 x 15 8 x 15 8 x 15 8 x 15 8 x 15 10 x 17 10 x 17 10 x 17 10 x 17 10 x 17

F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx F 3/8"G-Sx

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

410 410

16:29

Pagina 410

PRODUCT CUSTOMISATION

RAASM offers its customers the opportunity of ordering the products included in its range in different colours among the 6 made available. They can be requested by customers without minimum quantity requirements, or extra costs, choosing from the 5 additional colours to the standard colour (RAASM green). Customisation is characterised exclusively by the colour and does not include: instruction handbooks, labels, brands, etc. Delivery times can vary with respect to standard colour products (RAASM green). The above-mentioned customisation does not include the brake bleeders, pit and floor drainers, air-operated pumps, trolleys, service columns and accessories. Requests for different colours, in addition to those made available, or other types of customisation, must be appraised from time to time and will be tied to minimum quantities and additional costs

STANDARD COLOURS Products for which a customised colour is not specified, are understood to be supplied with the standard colour as per the catalogue.

RAASM green Example

Art. 44091

RAL 7035 Example

Art. 52013 Art. 8520.101

To order an article with a colour different from standard, among the six made available, it is necessary to add the following to the code the suffix:

/GREEN /C1 /C2 /C3 /C4 /C5

for green for neutral for yellow for orange for red for blue

Note: See the examples given in the table on the next page

RAASM Ral 7035 Ral 1004 Ral 2004 Ral 3020 Ral 5002

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 411

COLOURS AVAILABLE FOR CUSTOMISATIONS RAASM green

suffix GREEN

Example

Art. 52013/green Art. 8520.101/green

RAL 7035

suffix C1

Example

Art. 44091/C1

RAL 1004

suffix C2

Example

Art. 44091/C2 Art. 52013/C2 Art. 8520.101/C2

RAL 2004

suffix C3

Example

Art. 44091/C3 Art. 52013/C3 Art. 8520.101/C3

RAL 3020

suffix C4

Example

Art. 44091/C4 Art. 52013/C4 Art. 8520.101/C4

RAL 5002

suffix C5

Example

Art. 44091/C5 Art. 52013/C5 Art. 8520.101/C5

411 411

CATALOGO LIST 217 pag 361-418 GB ok

412 412

21-06-2006

16:29

Pagina 412

GUIDE TO READING

This catalogue facilitates the consulting and ordering of spare parts by our dealers and users. The components of each single article are grouped in kits called KR (=Spare Parts Kit). This management of spare parts has enabled us to cut costs in favour of the final price.

Note: When ordering, remember that one kit may be common to several articles. Knowing this will prevent the ordering of spare parts that would become pointless doubles. Example: the KR 6201 is the same for all grease pumps 50:1 and 65:1 Example: the KR 4302 is the same for all oil drainers. See the spare part kits table and corresponding article/s.

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 413

THE SPARE PARTS CATALOGUE

413 413

Each page of the following catalogue has the same graphic layout. For greater clarity the various sections making up the various pages are illustrated below with a brief description.

List of KR's (spare part kits) into which the article is divided. Every KR (e.g. KR1003) includes a distinct and homogeneous set of parts. A KR kit can be common to several articles.

List of parts of the article suppliable individually

A KS (e.g. KS1080) groups the spare parts (KR or single parts) given in the other tables. These are the spare parts recommended by the manufacturer, at the sales points and service centres, above all for first deliveries. Clearly, a KS cannot be shown in the exploded view

The seal kit (e.g. KR1050) includes all the seals used in the article. This kit is not mentioned or shown in the exploded view.

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 414

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 415

GENERAL SALES TERMS

415 415

Reserved exclusively for the foreign market Art. 1 : DELIVERY OF GOODS The goods are only forwarded ex factory, by means of the carrier specified by the customer and, in any case, travel at the customer’s risk and hazard. Art. 2 : ORDERS Orders for amounts of less than Eur 1500,00 (one thousand five hundred Euro) are not accepted. Whenever the execution of orders for amounts of less than Eur 1500,00 becomes essential, Eur 155,00 shall be charged for partial refund of our administrative costs. Art. 3 : ACCESSORIES All the accessories given in the price list (plugs, oil bar taps, oil guns, grease guns, probes, etc.) are supplied exclusively for fitting to or combining with the articles we produce. Art. 4 : COMPLAINTS Any complaint for shortages, errors or defects, noticed by a first exam of the goods, must be sent in writing to our Head office within 8 days of receiving the goods. Any defect of the product that is possible to notice only by using must be sent in writing to our Head office within 8 days from its discovering. Art. 5 : DELIVERY TERMS The delivery dates are always approximate. Possible delays in delivery do not give the customer any right to cancel the order or to claim ensuing damages. Urgent cases are subject acceptance by the Firm. The Firm has the right not to execute the order and to execute it fully or partially, without any claims or claims for damage being made towards the Firm. Art. 6 : PACKS AND PACKAGING Packaging costs are included in the price, except for special packing, which shall be charged at cost. Art. 7 : PRICES The current Price list cancels the previous price list. In the event of changes to our price list and/or individual articles, the goods shall be forwarded at the price in force on the day of delivery. The price-list and/or the prices of individual articles can be changed even without notice, according to the changes in market conditions or technical innovations/modifications made to the product. The prices are understood to be ex our Factory. Art. 8 : PAYMENTS Payments must be made exclusively to RAASM S.p.a. at the agreed conditions. Deductions or rounding off shall in no case be accepted. In the event of late payment with respect to the agreed conditions, the firm reserves the right to charge interest at the current rate and additional costs, starting from the day after that agreed on for payment. Discounts subject to payment already credited shall be re-charged. Art. 9 : WARRANTY RAASM S.p.a. provides every product with its manual, giving installation and maintenance instructions and indications about the controls that should be made. The warranty shall cover any defect due to material or manufacture procedure within validity and prescription terms fixed by the law, and, in this case, the only charge shall be of Eur 10,00. The guarantee will lapse in case of incorrect installation, operation or maintenance of the products. The articles must be returned free to our Factory for checking and acceptance. All technical information, drawings, illustrations etc. are supplied for guidance only. The company reserves the right to amend any design or specification without prior notice. Art. 10 : RESPONSABILITY RAASM S.p.a. is relieved of all responsability and obligations for any accident to persons and things that can occur due to or during use of the equipment, or caused by and in connection with the equipment. Art. 11 : COMPETENT LAW COURT These conditions of sale shall be governed by and construed with Italian law, and any disputes shall be settled by the law-court of Bassano del Grappa (VI), Italy

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 416

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 417

417 417

HOW TO REACH RAASM

Milan

Venice

Rome

TRENTO

BASSANO DEL GRAPPA

Statale 248

BASSANO del GRAPPA

Hotel Camin SS248

ale Stat

A31

VENICE

VICENZA

San Zeno

VERONA

EXIT FOR BASSANO ROSA’ -PADOVA

Marostica

PADOVA

Agip

VICENZA Statale 248

Cassola

BY PLANE With regular flights, the nearest airports are those Venice Tessera, Verona Villafranca and Treviso. • FROM VENICE TESSERA Bassano can be reached by train: Venice - Padova - Cittadella Bassano del Grappa • FROM VERONA VILLAFRANCA Bassano can be reached by train: Dossobuono - Verona - Vicenza Cittadella - Bassano del Grappa • FROM TREVISO Bassano can be reached by train: Treviso - Castelfranco - Cassola.

Statale 47

Uscita per Bassano/Padova direzione Bassano

BY TRAIN

BY OWN TRANSPORT

RAASM can be reached also by train, getting off at Bassano del Grappa station. • BOLZANO: Bolzano - Verona Vicenza - Cittadella - Bassano del Grappa

Arriving by car from Rosà the north or west, with Verona as the reference point take the A4 Motorway towards Vicenza - Valdastico. PADOVA At the Dueville exit head for Bassano del Grappa.

• MILAN: Milan - Verona - Vicenza Cittadella - Bassano del Grappa

If arriving from the south, with Padova as the reference point take State Road 47 towards Cittadella Bassano del Grappa.

• BOLOGNA: Bologna - Padova Cittadella - Bassano del Grappa • TRIESTE - UDINE: Trieste - Udine Codroipo - Treviso - Castelfranco Bassano del Grappa RAASM is approx. 3 km from the Train Station.

CATALOGO LIST 217 pag 361-418 GB ok

21-06-2006

16:29

Pagina 418

CATALOGO LIST 217 pag 1-197 ok

22-06-2006

9:11

Pagina 5

Via Marangoni, 33 - ITALY Export department

Tel. +39 0424 571 130 - Fax 0424 571 135

Technical department

Tel. +39 0424 571 150 - Fax 0424 571 155

E-mail: info@raasm.com - Internet: www.raasm.com

RAASM S.p.A. - 36022 S. ZENO DI CASSOLA (VI)