Secondary Regulators
Gas Tanks
CO2 Manifolds
D1805 3-Way Manifold
D1067C 3 output pressures
20 lb CO2
5 lb CO2
5 lb Nitrogen
We sell brand new aluminum gas tanks in standard sizing with high quality valves. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Most welding supply shops will exchange a full tank for your empty tank (the majority do not fill on site.) Our retail stores offer an exchange program on 5 and 20 lb CO2 tanks. The 20lb tank ships directly from the Supplier. Please allow up to 2–3 weeks for delivery. D1050 (5 lb CO2 Tank).................................................$84.99 D1052 (20 lb CO2 Tank)............................................$149.99 D1054 (20 cu ft Nitrogen Tank)..................................$109.99
Secondary regulators are used to create different pressures from one input pressure. To Use: Set your main regulator at the highest pressure your systems requires (i.e. for rootbeer.) Put a tee in the line between your main regulator and the secondary regulator(s). The line running from the tee feeds into the keg requiring the highest pressure (i.e. rootbeer). The lines coming out of the secondary regulator(s) apply pressure to your other kegs. The single output is our most popular seller. D1067A (1 output)....................................................$54.99 D1067B (2 outputs)..................................................$99.99 D1067C (3 outputs)................................................$159.99 D1067D (4 outputs)................................................$219.99
Regulator Parts
Regulators A A
B
C/D
Gas line manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to the other kegs. Each ball valve contains a check valve that insure that each keg is its own separate gas system. Neither gas nor beer can flow between kegs as quite often happens when tees, or manifolds without check valves, are used. Additionally, our manifolds contain a pressure relief valve on every unit which adds a degree of safety. The manifolds are uniquely modular, so you can use our Add On Assembly (D1820) to add valves as needed. The manifold body contains mounting holes that allow you to hang the units. The barbs are all 5/16", standard for gas line in the beer industry. Add On assembly includes tee, on/off check valve, and nipple. D1800 (2 Way)..........................................................$29.99 D1805 (3 Way)..........................................................$38.99 D1810 (4 Way)..........................................................$48.99 D1815 (6 Way)..........................................................$69.99 D1820 (Add On Assembly).........................................$13.95 D1820B (Manifold Nipple)............................................$1.95
CO2 Tee & Check Valve B E
F
G A
C
A) Gauge - Low Pressure (30 psi) For fine tuning dispense pressure. D1088................................................................$18.50
C
D
A) Premium Dual Gauge CO2 Regulator A sturdy, well-built regulator that comes with a built-in gasket where the regulator connects to the CO2 tank, eliminating the constant replacement of fiber washers. Pressure adjustment can be made by hand using the large easy to turn gray knob. Also comes with a built-in shutoff valve, a pressure relief safety valve, and our favorite feature – a back flow preventing check valve that saves your regulator from the backflow of beer. D1060..................................................................$64.99
B) Fermentap Dual Gauge CO2 Regulator A great deal on a high quality dual gauge CO2 regulator. Features include: Hand adjustable pressure, 30 PSI low pressure gauge, Built in tank gasket, Built in pressure relief valve, On/Off valve with barb, Large CO2 diaphragm — for increased performance and reliability. Made of Chrome plated brass so will not rust. D1064......................$44.99
C) Dual Gauge Nitrogen Regulator For use with beer-gas mix, which is usually 70% Nitrogen and 30% CO2. Beer-gas mix is used for Guinness and some other draft beers. D1070.........................$74.99
D) Dual Body/Dual Gauge CO2 Regulator Now you can have two different pressures coming from one tank. Useful when you have beers you want dispensed at different pressures, if you want to carbonate at different pressures than which you dispense, or if you have soda or sparkling water on one tap. D1065................................................................$135.99
64
B
B) Gauge - Low Pressure (60 psi)
A) CO2 Tee - Rigid Plastic
Most common low pressure gauge. D1090................................................................. $8.50
D1840.................................................................... $2.29
C) Gauge - High Pressure (LHT)
B) In-line Check/Ball Valve Save your regulator from the reverse flow of beer. Insert our in-line gas ball valve with internal one-way check valve. D1870.................................................................... $16.50
3000 psi gauge tells tank pressure. Left hand thread for our regulators. D1095..................................................................$9.75
D) Gauge - High Pressure (RHT) 3000 psi gauge tells tank pressure. Right hand thread for most brands of regulators. D1098.................................................................. $14.95
E) Regulator Gasket
C) CO2 Tee - Stainless Steel
D1860.................................................................... $4.99
Tail Pieces, Nuts & Gaskets
Fiber washer, compression style. You don’t need one with our regulator because it has a built-in o-ring. With most regulators you will need to replace the gasket every time you change the tank. D1100.......................................................................$.39
D
F) Shut Off Check/Ball Valve Threaded for insertion into a regulator, this unique valve is a ball valve and check valve all in one. Offers you the flexibility to quickly turn off CO2 and at the same time keep beer from traveling back up the gas line and into the regulator. Standard equipment on our regulators. D1120.....................................................................$14.95
G) Gauge Cage Protect our premium dual gauge regulator (D1060) from falls. A very worthy investment. If you are moving your tank around with regulator attached, a gauge cage becomes a necessity. D1080...................................................................$17.95
Draft Beer Equipment & Parts
B
C
A
Picture A B C D E F G
E
G Description ¼" Tail Piece 5/16" Tail Piece 3/8" Tail Piece 3/16" Tail Piece (90°) Hex Nut Wing Nut Beer Line Gasket
F
Order #
D1725 D1730 D1735 D1720A D1740 D1750 D1755
Price
$2.49 $2.49 $2.49 $6.95 $1.25 $3.99 $.30