PRODUCT CATALOGUE 2014
EUROPE www.milkrite.com
CONTENTS Page No.
02. LINERS 02-03. IMPULSE AIR
www.milkrite.com
04.
IMPULSE
05.
CLUSTER EXCHANGE
06-07. ULTRALINER ROUND LINERS 07.
Visit our website for all the up to date features on products and technical information to help you improve milking efficiency
ULTRALINER TLC TRIANGULAR LINERS
08. TUBING 09.
ULTRACLEAN, STANDARD AND SILICONE COIL TUBING
10.
SHORT AIR TUBES
11.
SHORT MILK TUBES
12.
CLAWS
12.
ULTRACLAW PRODUCT RANGE
13.
ULTRACLAW SPARE PARTS
14.
ORBITER PRODUCT RANGE
15.
ORBITER SPARE PARTS
16.
ACCESSORIES
16-17. WASH SYSTEMS 18.
SHELLS AND WEIGHTS
19. FILTERS
See what our customers have to say about our products
EU/PC/ENG/V2
News and updates on the latest technology
Technical videos that explain how the products work
20.
MILKRITE SHOP
21.
IMPULSE AIR TEST KIT
01
EU/PC/ENG/V2
HOW DOES The
WORK?
PRODUCT RANGE
system is a unique milking technology. We introduce the air behind the milk to efficiently move the milk away from the teat end.
MILKRITE REFERENCE
Impulse Air liners reduce mouthpiece vacuum which results in much reduced teat congestion. So we allow the vacuum to do what it is meant to do - remove the milk - without damaging the teat.
PULSATION AND VACUUM CURVES THROUGH THE MILKING CYCLE - AT LOW FLOW Mouthpiece vacuum - with Mouthpiece vacuum - with Standard liners
Revolutionary air entrance showing reduced vacuum acting on the teat
D (mm)
TO VEN PRO VE TE AT O , R IMP D ITION TIC C ON SOM A D AN UCE R E D C O UN T T I T IS CEL L CE M AS U RED
30
20
IP20-AIR
278.4
21.1
10
55.6
IP23-AIR
278.4
21.1
15
55.6
IP24-AIR
137.2
21.1
N/A
55.6
IP25-AIR
278.4
21.1
10.1
55.6
IP10 LINER RANGE
50
VACUUM (kPa)
C (mm)
THE IP20 RANGE IS ONLY AVAILABLE WITH MOUTHPIECE VENT
Vacuum in the claw Pulsation curve
40
Triangular shaped interior to reduce the total air volume between the shell and the liner
B (mm)
IP20 NARROW BORE LINER RANGE
Keeping teats dry during milking, with no splash back of milk, reduces the bacterial challenge.
Locking antitwist feature and improved slippage control
A (mm)
IP10-AIR
312
23
9
IP10-01-AIR
287
23
9
59
IP11-AIR
287
20
13
59
IP12-AIR
302
23
8
59
IP13-AIR
304
23
13
59
IP14-AIR
152
23
N/A
59
IP15-AIR
320
23
10
59
59
Products featured come in packs of 4
10
0 0
1
2
MILKRITE REFERENCE
3
TIME (SEC) Chart shows reduced vacuum acting on the teat when using
IMPULSE TRIANGULAR COMBINATION
Impulse Air’s vented triangular technology provides a more uniform closing action on the cows teat end. This results in less hyperkeratosis. The impact resistant shell has a triangular shaped interior to reduce the total air volume between the shell and the liner. This leads to a more responsive opening and closing of the liner, which optimises the milk and the rest phases of pulsation.
GENTLE MASSAGE ON THE TEAT BETTER GRIP TO THE TEAT LESS LINER MOVEMENT GIVING GENTLE OPENING AND CLOSING PHASES LIGHTER WEIGHT CLUSTERS FOR LESS STRESS ON THE TEAT MORE UNIFORM ACTION ON THE COW’S TEAT END RESULTS IN LESS HYPERKERATOSIS 02
.
Most damage occurs to the teat at low milkflow. The vented liner system reduces the vacuum forces on the teat throughout the milking cycle.
Triangular liners have the advantage that they will fit a much wider range than conventional liners - this is to do with the way they grip the teat. Even so - the Impulse Air range comes in two generic size types. The IP10 range is designed for a wider teat range which is a feature of many European herds. The IP20 range is a narrow bore liner specifically designed for smaller and shorter teats and for easy milking cows with a high milk flow rate. Performance is significantly improved when we can make the liner more closely match the average teat size.
CLAW TYPES
SPECIFICATIONS: A
Total Length
B
Orifice Diameter
C
Inside Milk Tube Diameter
D
DESCRIPTION
IP10 / IP20
Fits claws with 12-13mm OD nipples with square cut
IP10 - 01
Fits claws with 12-13mm OD nipples with square cut. This is a shorter version to fit lower bagged cows
IP11
Fits claws with 14-16mm OD nipples with square cut. This is a smaller orifice version at shorter length for smaller teated and lower bagged cows
IP12
Fits claws with 10-11mm OD nipples with angled cut
IP13 / IP23
Fits Harmony type claws
IP14 / IP24
Short liner - comes with a sight glass. Can fit any claw - just choose the right short milk tube
IP15 / IP25
Fits claws with 12-13mm OD nipples with angled cut
Hood Diameter
Conform to stringent BfR and RAL guidelines for materials in contact with milk.
See Impulse Air in action at www.milkrite.com
www.milkrite.com
ALL TYPES
03
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
EU/PC/ENG/V2
EU/PC/ENG/V2
PRODUCT RANGE MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
PRODUCT RANGE
D (mm)
A simple, no hassle change process saving you time and money
IP10 LINER RANGE NON VENTED IP10
312
23
9
59
IP10-01
287
IP11
287
23
9
59
20
13
IP12
59
302
23
8
59
IP13
304
23
13
59
IP14
152
23
N/A
59
IP15
320
23
10
59
IP10 SILICONE LINER RANGE NON VENTED IPS10
161
23
N/A
FEWER SLIPS, SQUEALS AND KICK-OFFS
We supply the complete clusters assembled ready to go:
IMPROVED TEAT END CONDITION 59
Products featured come in packs of 4
LINERS:
Impulse Air or Impulse
PULSE TUBES:
7mm x 14mm x 200mm
SHELL WEIGHT OPTIONS:
Steel or Plastic
CLAW OPTIONS:
Orbiter HD claw 350cc or 250cc bowls With or without shut-off
Locking AntiTwist Feature
Improved Slippage Control
Impact Resistant Shell
IMPULSE TRIANGULAR COMBINATION REDUCES AIR VOLUME FOR MORE RESPONSIVE OPENING AND CLOSING OF LINER
With or without ACR Brackets SPECIFICATIONS: A
Total Length
B
Orifice Diameter
C
Inside Milk Tube Diameter
D
Hood Diameter
Conform to stringent BfR and RAL guidelines for materials in contact with milk.
Cluster Flush Fittings Variety of Parking Brackets
Easy liner change
We manage the process for you
Hygienically cleaned parts
No more costs of claw maintenance
We tailor the cluster to your system
Milkrite trained technicians make sure all your parlour conditions are operating at their peak
IT’S SO SIMPLE 04
www.milkrite.com
05
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
EU/PC/ENG/V2
EU/PC/ENG/V2
PRODUCT RANGE PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
PRODUCT RANGE
B (mm)
C (mm)
D (mm)
PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
BOUMATIC COMPATIBLE
PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
GEA COMPATIBLE
PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
GOAT LINERS
DK1X
BM1XU
300
23
11
22
20169
FW69U
303
21
10
22
10025
WS025U
279
22
10
21
D381997
GGM97U
220
22
10
20
DK1X*
BM1XUV*
300
23
11
22
20198
FW98U
303
20.8
12
21.5
10029
WS029U
289
22
10
22
988513-01
GDL513U
153
21
N/A
20
R1EX
BMEXU
266
21
11
22
10067
WS067U
305
23
10
24
7036-2725-110
GWS110U
300
22
9
20
R1EX*
BMEXUV*
266
21
11
22
7021-2725-110
WS110U
173
23
N/A
24
DKFM
BMFMU
308
24
11
22
25
GASCOIGNE COMPATIBLE MK2H
GM2U
311
27
8
25
7023-2725-120
WS120U
156
23
N/A
*V= with milk tube venting
381416
GM16U
310
24
8
25
7022-2725-150
WS150U
181
25
N/A
25
DAIRYMASTER COMPATIBLE
381922
GM22U
318
23
10
25
7022-2725-180
WS180U
181
24.75
N/A
25.3
916
DM916U
310
22
7
27
DELAVAL COMPATIBLE
381974
GM74U
315
20
9
23
7021-2725-220
WS220U
173
23
N/A
25
381975
GM75U
315
23
8
26
7021-2725-230
WS230U
173
23
N/A
25
381985
GM85U
325
24
10
25
7021-2725-240
WS240U
334
23
9
25
381986
GM86U
319
21
10
23
381988
GM88U
319
24
10
23
7021-2725-270 7021-2725-370
WS270U
326
22
10
23
381989
GM89U
320
22
11
22
960000-01
DL000U
295
24
8
25
960001-01
DL001U
300
27
8
24
999007-03
DL007U
310
20
13
23
999007-01
DL007U-01
340
20
13
23
964008-01
DL008U
305
22
13
23
999009-01
DL009U
310
20
13
22
960016-01
DL016U
293
24
8
25
960017-02
DL017U
303
24
8
25
960017-01
DL017U-01
302
27
8
25
960036-01
DL036U
295
24
13
25
960037-02
DL037U
302
24
12
26
960037-01
DL037U-01
302
27
12
26
928178-01
DL178U
288
21
8
22
928179-01
DL179U
295
23
9
24
999295-01
DL295
313
24
8
25
N/A
DL295-10
313
24
10
25
901031-01
928328-01
DL328U
306
24
11
23.7
964007-01
DL4007U
310
20
13
22
999008-01
DL9008U
337
21.5
12.5
23
FULLWOOD COMPATIBLE 20114
FW14U
320
21
381991
GM91U
319
23
10
26
381993
GM93U
309
27
10
25
381995
GM95U
325
24
10
25
381999
GM99U
320
20
10
22
267
21
8
22
GERMANIA COMPATIBLE Germania 01
GRM1U
MELTEC COMPATIBLE 7720-0068-278
MEL278U
179
24
N/A
25
7720-1384-450
MEL450U
180
22
N/A
25
MS031U
310
958123-01
MS123U
294
901163-01
MS163U
316
23
22
11
N/A
N/A
23
10
N/A
319
21
10
N/A
163
23
N/A
N/A
23
N/A
N/A
25
11
25
SAC COMPATIBLE
FULLWOOD COMPATIBLE 20138
FW37U
313
23
8
26
25215007
SAC007U
278
20
8
24
FW38U
313
23
10
26
25215010
SAC010U
300
22
14
23
20146
FW46U
302
21
8
22
25215012
SAC012U
300
20
14
23
20167
FW67U
304
23
8
22
25215020
SAC020U
305
21
14
23
20168
FW68U
303
23
10
22
25215022
SAC022U
305
22
14
23
Products featured come in packs of 4
www.milkrite.com References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
M08AV003XZ
989917-80 / 989917-82
TLC-FW1
313
SPECIFICATIONS: A
Total Length
B
Orifice Diameter
C
Inside Milk Tube Diameter
D
Barrel Diameter
GASCOIGNE COMPATIBLE 381986
20137
EU/PC/ENG/V2
292
13
26
9
20138
06
D (mm)
20
11
24
24
25
C (mm)
310
23
308
8
B (mm)
TLC-A6
315 300
MS897U
22
A (mm)
999007-03
MS197U
955897-01
327
MILKRITE REFERENCE
N/A
23.5
FW27U
PARLOUR MANUFACTURER REFERENCE
N/A
MS390U
ALTERNATIVE FOR
TRIANGULAR LINERS
12
901197-01
MILKRITE REFERENCE
TLC
12
955390-01
GOAT DIAPHRAGMS Products featured come in packs of 10
21
9
20227
25
21
22.7
25
N/A
295
310
25
23
306
MS875U
10
158
TLC-A5
955875-01
N/A
WS3-100U
TLC-A3
25
25
7023-2725-100
Products featured come in packs of 4
960036-01
9
22
26
999009-01
24
327
23
N/A
27
8 9
300
164.6
N/A
25
28
24 23
MS507U
FW15U
22
166
TLC-A2
24
955507-01
FW22U
159
WS3-110U
960016-01
10
24
20122
WS270U-01
DELAVAL COMPATIBLE
MANUS COMPATIBLE
8
20215
N/A 7023-2725-110
Products featured come in packs of 2
TLC-GM1
GEA COMPATIBLE 7021-2725-220
TLC-W2
BOUMATIC COMPATIBLE DK1X, MAGNUM AND FLEX
TLC-BX1
163
STRANGKO COMPATIBLE SH3426010
TLC-ST1
Products featured come in packs of 4
163
Conform to stringent BfR and RAL guidelines for materials in contact with milk.
www.milkrite.com 23
N/A
N/A
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
07
EU/PC/ENG/V2
COIL TUBING
ULTRACLEAN, STANDARD AND SILICONE Dual layer tubing that gives the benefits of longer life and hygienic properties associated with silicone, but with the robustness and value of black tubing
MILKRITE REFERENCE
DIMENSION (mm)
LENGTH (m)
ULTRACLEAN MILK The inner white layer of a special thermoplastic vulcanizate (TPV) rubber has superb hygienic properties and is resistant to butterfat and acids. Butterfat cannot pass through this layer, so the tube stays clean. The black rubber outer provides high durability and flexibility and resists ozone cracking commonly seen in dairy tubes.
M14AV007UZ
10 x 21
20
M14AV001UZ
13.5 x 23.8
20
M14AV002UZ
14.5 x 25.5
20
M14AV003UZ
15.5 x 27
20
M14AV004UZ
16 x 28
20
ULTRACLEAN TRANSFER M14AV005UZ
19 x 31.8
20
M14AV006UZ
24 X 40
10
MILKRITE REFERENCE
DIMENSION (mm)
LENGTH (m)
STANDARD BLACK AIR SINGLE PULSE
HI-TECH
7 x 14
20
M14AV001CZ
8 x 16
20
M14AV011CZ
9.1 x 18
20
M14AV012CZ
9.5 x 18
20
TWIN PULSE M14AV003CZ
7 x 14
20
M14AV004CZ
8 x 16
20
STANDARD BLACK MILK
MANUFACTURING
HELPS MAINTAIN MILK QUALITY RESISTS THE BUTTERFATS IN THE MILK RESISTS CRACKING LONG LASTING Conforms to the Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food
08
M14AV002CZ
www.milkrite.com
M14AV014CZ
8 x 16
20
M14AV005CZ
13.5 x 23.8
20
M14AV006CZ
13.5 x 24.7
20
M14AV007CZ
14.5 x 25.5
20
M14AV008CZ
15.5 x 27
20
M14AV009CZ
16 x 27
20
M14AV020CZ
10 x 19
20
STANDARD BLACK TRANSFER M14AV010CZ
19 x 31.8
20
STANDARD BLACK LENGTHS M14AV013CZ
20,5 x 35
10
M14AV015CZ
22 x 35
10
M14AV016CZ
28.60 x 44.4
3.66
M14AV017CZ
38 x 57
1.83
M14AV018CZ
6 x 13
20
Our black tubing conforms to the very strict BfR/RAL standards for materials in contact with milk
ULTRACLEAN
MILKRITE REFERENCE
SILICONE AIR
DIMENSION (mm)
LENGTH (m)
COLOUR
SINGLE PULSE
M14AV001EZ
7 x 14
20
CLEAR
M14AV002EZ
8 x 16
20
CLEAR
TWIN PULSE M14AV003EZ
7 x 14
20
BLUE
M14AV004EZ
8 x 16
20
BLUE
SILICONE MILK M14AV005EZ
14 x 24
20
BLUE
M14AV006EZ
15 x 27
20
BLUE
M14AV007EZ
16 x 27
20
BLUE
M14AV009EZ
6 x 13
20
CLEAR
M14AV010EZ
10 x 21
20
CLEAR
20
BLUE
SILICONE TRANSFER M14AV008EZ
19 x 31.8
Our silicone tubing is fully compliant with the RAL knife and fork standard, for materials in contact with milk. References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
09
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
EU/PC/ENG/V2
EU/PC/ENG/V2
SHORT AIR TUBES PRODUCT RANGE INTERNAL DIAMETER (mm)
MILKRITE REFERENCE
EXTERNAL DIAMETER (mm)
CUT LENGTH (mm)
SHORT AIR TUBESMOULDED AIR TUBES M12AV017XZ
4.8
10.8
203
M12AV018XZ
6.4
12.4
165
M12AV019XZ
6.4
12.4
190
M12AV020XZ
6.4
12.4
229
M12AV021XZ
7.1
14
190
M12AV022XZ
7.1
A WIDE VARIETY OF SIZES TO FIT ALL APPLICATIONS
14
HIGH QUALITY AND CONSISTENCY FROM THE ORIGINAL MANUFACTURER
AVAILABLE AS EXTRUDED OR MOULDED VERSIONS
229
Products sold in packs of 20
SHORT AIR TUBESEXTRUDED AIR TUBES M12AV014XZ
7
14
155
M12AV015XZ
7
14
180
M12AV004XZ
7
14
200
M12AV006XZ
7
14
228
M12AV005XZ
7
14
267
M12AV008XZ
8
16
127
M12AV009XZ
8
16
177
M12AV010XZ
8
16
203
M12AV011XZ
8
16
228
M12AV012XZ
8
16
266
M12AV013XZ
8
16
300
SHORT MILK TUBES PRODUCT RANGE PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
SHORT MILK TUBESGEA COMPATIBLE
PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
SHAPED MILK TUBESULTRACLEAN
7027-2637-080 / 7021-7101-000
SMT080WS001
140
20
8.5
10
7027-2637-090 / 7021-7101-010
SMT090WS002
180
20
8.5
10
Products are sold singularly
7027-2637-100 / 7021-7101-020
SMT100WS003
140
20
10
10
7027-2637-110 / 7021-7101-090
STANDARD BLACK
SMT110WS004
180
20
10
10
7027-2637-120 / 7021-7101-040
SMT120WS005
130
21
11
12
7027-2637-140 / 7027-7101-050
SMT140WS006
160
21
11
12
7027-2637-190 / 7021-7101-030
SMT190WS007
160
20
10
10
998382-01
M04DL005UZ
16
26.9
800
80
967458-02
M04DL006UZ
20
34.5
500
97
969474-01
M04DL001XZ
14
27.7
800
80
999588-01
M04DL002XZ
14
24.7
1000
70
967458-02
M04DL004XZ
20
34.5
500
97
998382-01
M04DL003XZ
16
26.9
800
80
Products are sold singularly
References SMT120WS005 and SMT140WS006 to suit the square cut claw nipple Products sold in packs of 20 PARLOUR MANUFACTURER REFERENCE
MILKRITE REFERENCE
A (mm)
B (mm)
C (mm)
D (mm)
SHORT MILK TUBESFULLWOOD COMPATIBLE 22010
SMT010FW001
150
16.5
8.7
8.7
22013
SMT013FW002
155
20.2
11.2
11.2
Products sold in packs of 20
Products sold in packs of 20
10
EU/PC/ENG/V2
A WIDE VARIETY OF SIZES TO FIT ALL APPLICATIONS
HIGH QUALITY AND CONSISTENCY FROM THE ORIGINAL MANUFACTURER
MATERIALS TO THE LATEST FOOD STANDARDS
www.milkrite.com
www.milkrite.com
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
11
EU/PC/ENG/V2
CLAWS
CLAWS
ULTRACLAW PRODUCT RANGE MILKRITE REFERENCE
MILK NIPPLE OD
ANG/STR
ANG
ULTRACLAW SPARE PARTS
WEIGHT
CAPACITY
VENT
CLAW WITH SHUT-OFF M20AV001XZ
13MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV065XZ
13MM
STRAIGHT
45°
600G
350 cm³
VENTED
M20AV044XZ
13MM
ANGLED
45°
600G
350 cm³
VENTED
M20AV042XZ
15MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV003XZ
13MM
STRAIGHT
30°
600G
350 cm³
NON VENTED
CLAW WITHOUT SHUT-OFF M20AV002XZ
13MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV069XZ
13MM
ANGLED
45°
600G
350 cm³
VENTED
M20AV043XZ
15MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV019XZ
13MM
STRAIGHT
30°
600G
350 cm³
M20AV066XZ
13MM
STRAIGHT
45°
600G
350 cm³
DISTRIBUTION CROSS STANDARD
GASKET
NON VENTED
LOWER BOWL COVER WITH VALVE COMPLETE / MR
NON VENTED
M20AV060SP
M20AV047SP
M20AV075SP
LOWER BOWL COVER WITH VALVE / MR
SHUT-OFF VALVE
SEPARATION CROSS
M20AV052SP
M20AV057SP
M20AV070SP
LOWER BOWL COVER WITHOUT VALVE COMPLETE / MR
LOCKING VALVE PLUG (SHUT-OFF CAP)
RING (BUFFER JOINT)
M20AV058SP
M20AV067SP
M20AV073SP
We can tailor a claw to your individual needs
LOWER BOWL COVER WITHOUT VALVE / MR M20AV059SP
ERGONOMIC DESIGN FOR EASY HANDLING
350CC CAPACITY CLEAR BOWL, HELPS REDUCE MILK AGITATION AND YOU CAN EASILY SEE THE MILK FLOW
12
EU/PC/ENG/V2
NIPPLES POSITIONED WIDER AT THE FRONT TO AID POSITIONING AND MILK FLOW
DIRT AND BACTERIA TRAPS SUBSTANTIALLY REDUCED. THERE IS NOWHERE FOR OLD MILK OR CHEMICALS TO ACCUMULATE AND THE DESIGN MAKES CLEANING MUCH MORE EFFICIENT
INTERNAL DEFLECTOR WITHIN THE BOWL AIDS MILK FLOW AND SEPARATES MILK QUARTERS TO REDUCE CHANCES OF CROSS-CONTAMINATION
POLYSULPHONE PLASTIC, WHICH IS VIRTUALLY UNBREAKABLE
FLOATING PULSATION TUBE BRACKET ALLOWS EASY POSITIONING OF THE UNIT BENEATH THE TEAT – AN IMPORTANT FACTOR IN COW COMFORT AND MILKING EFFICIENCY
COMES WITH A VARIETY OF PARKING BRACKETS AND CLUSTER FLUSH FITTINGS
www.milkrite.com
www.milkrite.com
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
13
EU/PC/ENG/V2
CLAWS
CLAWS
ORBITER HD PRODUCT RANGE MILKRITE REFERENCE
MILK NIPPLE OD
ANG/STR
ANG
WEIGHT
CAPACITY
ORBITER HD SPARE PARTS VENT
CLAW WITH SHUT-OFF M20AV123XZ
13MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV124XZ
13MM
STRAIGHT
45°
600G
350 cm³
VENTED
M20AV125XZ
13MM
ANGLED
45°
600G
350 cm³
VENTED
M20AV126XZ
15MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV127XZ
13MM
STRAIGHT
30°
600G
350 cm³
NON VENTED
M20AV128XZ
15MM
STRAIGHT
30°
600G
350 cm³
NON VENTED
M20AV129XZ
13MM
ANGLED
45°
600G
350 cm³
NON VENTED
CLAW WITHOUT SHUT OFF
LOWER BOWL COVER WITH SHUT-OFF
PLASTIC STEM COVER
SHUT-OFF SPIGOT
M20AV016SP
M20AV122SP
M20AV025SP
BOWL OUTER SEAL
SHUT-OFF CAP
NON VENTED
LOWER BOWL COVER WITHOUT SHUT-OFF
NON VENTED
M20AV017SP
M20AV023SP
M20AV026SP
ACR BRACKET
INNER CENTRE SEAL
CENTRE FIXING KNOB
M20AV119SP
M20AV024SP
M20AV117SP
M20AV130XZ
13MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV131XZ
13MM
STRAIGHT
45°
600G
350 cm³
VENTED
M20AV132XZ
13MM
ANGLED
45°
600G
350 cm³
VENTED
M20AV133XZ
15MM
STRAIGHT
30°
600G
350 cm³
VENTED
M20AV134XZ
13MM
STRAIGHT
30°
600G
350 cm³
NON VENTED
M20AV135XZ
15MM
STRAIGHT
30°
600G
350 cm³
M20AV136XZ
13MM
ANGLED
45°
600G
350 cm³
We can tailor a claw to your individual needs
PARALLEL VACUUM BLOCK M20AV021SP
ERGONOMIC DESIGN FOR EASY HANDLING. THE BOWL FITS NICELY INTO THE PALM OF THE HAND
ROBUST PLASTIC BOWL TO RESIST ANY DAMAGE IN THE PARLOUR
350CC OR 250CC CAPACITY CLEAR BOWL, HELPS MAINTAIN VACUUM STABILITY
14
EU/PC/ENG/V2
MINIMAL EDGES, REDUCES SITES FOR DIRT AND BACTERIA GROWTH, AND MAKES WASHING MORE EFFICIENT
COMES WITH A VARIETY OF BRACKET TYPES - INCLUDING STANDARD PARKING AND ACR BRACKETS, WITH CLUSTER FLUSH CONNECTIONS.
www.milkrite.com
www.milkrite.com
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
15
EU/PC/ENG/V2
ACCESSORIES WASH SYSTEMS
STAINLESS STEEL WASH SYSTEMS MILKRITE REFERENCE
ACCESSORIES
WASH SYSTEMS SPARE PARTS IMPULSE IPJC4
MILKRITE REFERENCE DESCRIPTION
COMPATIBLE WITH
DESCRIPTION
WASH CUPS (TO FIT JETTER TRAYS) MILKRITE IMPULSE WASH CUPS
WASH SYSTEMS WALL MOUNTED M06AV058XZ
IPCWSWM-NB - IMPULSE WASH SYSTEM - COMPLETE WITH IPJC4 WASH CUP FOR IP20 VENTED NARROWBORE LINER RANGE
M06AV044XZ
IMPULSE WASH SYSTEM - COMPLETE WITH M06AV039XZ WASH CUP FOR FOR IP10 AND IP10 VENTED LINER RANGE
M06AV025XZ
COMPLETE WASH SYSTEM WITH LARGE WASH CUPS
M06AV026XZ
COMPLETE WASH SYSTEM WITH MEDIUM WASH CUPS
M06AV027XZ
COMPLETE WASH SYSTEM WITH SMALL WASH CUPS
WASH SYSTEMS PIPE MOUNTED M06AV057XZ
IPCWSPM-NB - IMPULSE WASH SYSTEM - COMPLETE WITH IPJC4 WASH CUP FOR IP20 VENTED NARROWBORE LINER RANGE
M06AV045XZ
IMPULSE WASH SYSTEM - COMPLETE WITH M06AV039XZ WASH CUP FOR FOR IP10 AND IP10 VENTED LINER RANGE
M06AV028XZ
COMPLETE WASH SYSTEM WITH LARGE WASH CUPS
M06AV029XZ
COMPLETE WASH SYSTEM WITH MEDIUM WASH CUPS
M06AV030XZ
COMPLETE WASH SYSTEM WITH SMALL WASH CUPS
* The wash systems include the tray, the wash cups, the wash stems and the fittings.
M06AV050XZ
MILKRITE IMPULSE NARROW BORE
IPJC3 - IMPULSE WASH CUP FOR GEA WASHTRAY CONVERSIONS
M06AV051XZ
MILKRITE IMPULSE NARROW BORE
IPJC4 - IMPULSE WASH CUP FOR DELAVAL ROSEBUD / CANDLESTICK WASHTRAY CONVERSIONS
M06AV039XZ
MILKRITE IMPULSE & DELAVAL
SMALL - FITS IMPULSE IP10 VENTED AND NON VENTED LINERS
M06AV041XZ
MILKRITE IMPULSE, DELAVAL AND FULLWOOD
SMALL - FITS IMPULSE IP10 VENTED AND NON VENTED LINERS
IMPULSE M06AV039XZ
OTHER WASH CUPS M06AV016XZ
MILKRITE WASH SYSTEM
LARGE INSIDE DIAMETER (MAX. 65.9 MM)
M06AV017XZ
MILKRITE WASH SYSTEM
MEDIUM INSIDE DIAMETER (MAX. 60.7 MM) SMALL INSIDE DIAMETER (MAX. 57.24 MM)
M06AV018XZ
MILKRITE WASH SYSTEM
M06AV005XZ
DELAVAL
7310 - STANDARD SIZE
M06AV006XZ
DELAVAL
7311 - LARGE ULTRA SIZE
M06AV038XZ
DELAVAL CANDLE STICK & DL4007U
7313 - MEDIUM SIZE
M06AV008XZ
GERMANIA / DELAVAL
7316 - FLAT TOP DESIGN (NO STEM) - 38MM
IMPULSE IPJC2
JETTER CUPS (DO NOT REQUIRE A JETTER TRAY) M06AV043XZ
IPJC2 - IMPULSE JETTER CUP FOR BOUMATIC WASH TRAY CONVERSIONS
MILKRITE IMPULSE
M06AV001XZ
SURGE
7330 - OPEN CUP DESIGN
M06AV002XZ
BOUMATIC
7340 - FLAT TOP DESIGN - 40MM
M06AV003XZ
DELAVAL
7350 - FLAT TOP DESIGN - 35MM
M06AV004XZ
OTHERS (FITS STRECH LINERS)
7360 - FLAT TOP DESIGN - 38MM
M06AV009XZ
BOUMATIC
7322 - OPEN CUP DESIGN - 57MM (GROOVE FOR TEE ASSEMBLY)
CONVERSION KITS AND COMPONENTS FOR IMPULSE IP20-AIR NARROW BORE LINER RANGE
HIGH QUALITY STAINLESS STEEL TRAYS SUITABLE FOR EVEN THE MOST DEMANDING PARLOUR CONDITIONS
A WIDE CHOICE OF JETTER CUP SIZES TO SUIT MOST CLUSTERS
16
THE ASSEMBLY IS EASILY INSTALLED AND IS AVAILABLE WITH A WIDE VARIETY OF STAINLESS STEEL FIXINGS
STAINLESS STEEL CANDLES, SO NO MORE BREAKAGES OR SNAP-OFFS
www.milkrite.com References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
EU/PC/ENG/V2
M06AV053XZ
MILKRITE REFERENCE
DESCRIPTION
M06AV059XZ
CONVERSION KIT FOR DELAVAL WASHTRAYS (4 X WASHCUPS IPJC4, 4 X WASH STEMS, 2 X T-PIECES, 1 X VENTED DUCKBILL)
M06AV061XZ
CONVERSION KIT FOR GEA/WSURGE (NEW STYLE) WASHTRAYS (4 X WASHCUPS IPJC3, 2 X T-PIECES, 1 X VENTED DUCKBILL)
M06AV053XZ
7370-MV - VENTED DUCK BILL DRAIN VALVE
M06AV054XZ
TP34 - T PIECE LARGE, 3/4” (19MM)
M06AV055XZ
TP58 - T PIECE SMALL, 5/8” (16MM)
M06AV037XZ
OTHER COMPONENTS MILKRITE REFERENCE
DESCRIPTION
M06AV037XZ
WASH STEM - DELAVAL REPLACEMENT - STEM AND CONNECTOR
M06AV022XZ
CLAMP PLATE FOR PIPE FIXING SST
M06AV023XZ
WALL BOLTS ST.STEEL
17
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
EU/PC/ENG/V2
ACCESSORIES
ACCESSORIES
IMPULSE SHELLS AND WEIGHTS
STAINLESS STEEL SHELLS
IMPULSE AND IMPULSE AIR RANGE MILKRITE REFERENCE
IP20 NARROW BORE RANGE
MILKRITE REFERENCE
IP10 RANGE
LOCK RING INSIDE DIAMETER
HOOD OUTSIDE DIAMETER
OUTSIDE DIAMETER FOR PULSE TUBE
140
20
44
10
265 g
148
22.3
44
10
230 g 200 g
MILKRITE REFERENCE
ALTERNATIVE FOR
LENGTH OF SHELL
M10AV007XZ
DELAVAL - SHORT & HEAVY
M10AV008XZ
DELAVAL - HARMONY TYPE
WEIGHT
SHELLBODY, BLUE, TRIANGULAR, NARROWBORE
M10AV060XZ
SHELLBODY, BLUE, TRIANGULAR
M10AV005XZ
M10AV009XZ
DELAVAL - SHORT & LIGHT
140
20
44
10
BLUE PLASTIC WEIGHT, NARROWBORE
M10AV062XZ
BLUE PLASTIC WEIGHT
M10AV013XZ
M10AV010XZ
BOUMATIC
140
19
42.5
8
180 g
STAINLESS STEEL WEIGHT, NARROWBORE
M10AV061XZ
STAINLESS STEEL WEIGHT
M10AV006XZ
M10AV011XZ
GASCOIGNE; MANUS
155.8
20
42
10
250 g
Products are sold singularly
Products are sold singularly
M10AV014XZ
GEA
147
27
41.2
10
270 g
M10AV015XZ
FULLWOOD
145
25
45
10
200 g
Products are sold singularly
SILICONE STOPPERS FOR CLAWS MILKRITE REFERENCE
COMPATIBLE WITH
DESCRIPTION
M20AV038SP
DELAVAL HARMONY
9mm
PACKS OF 20
M20AV037SP
DELAVAL HARMONY
4mm
PACKS OF 50
FABRIC WEIGHT
DIMENSIONS
PIECES PER CARTON
SOLD IN
FILTERS MILKRITE REFERENCE
LIGHTWEIGHT TO REDUCE STRESS ON THE COW - AND THE HERDSMEN DESIGNED TO TAKE VARIABLE WEIGHT RINGS SO THAT YOU CAN TAILOR THE WEIGHT OF YOUR CLUSTER
MILKRITE REFERENCE M08AV004XZ
SINGLE
SHORT LINER ASSEMBLING TOOL
M08AV005XZ
SINGLE
PULSATION RESTRICTORS
M08AV017XZ
PACK OF 100
EU/PC/ENG/V2
ANTI-TWIST MECHANISM TO KEEP THE LINER CORRECTLY POSITIONED
QUANTITY
SIGHTGLASS/CONNECTOR FOR SHORT LINERS
18
TRIANGULAR INNER PROFILE TO REDUCE THE AIR SPACE BETWEEN THE TRIANGULAR LINER AND THE SHELL. THIS MAKES THE LINER MORE RESPONSIVE TO THE PULSATION SIGNALS
GLUED FILTERS 80GR M18LG002LC
80g
320mm x 58mm
1000
M18LG003LC
80g
455mm x 58mm
1000
M18LG006LC
80g
620mm x 58mm
1000
SEWN FILTERS 80GR M18LS012LC
80g
530mm x 58mm
1000
M18LS013LC
80g
620mm x 58mm
1000
M18LS022LC
80g
800mm x 75mm
1000
SEWN FILTERS 75GR M18LS023SC
75g
610mm x 95mm
1000
M18LS025SC
75g
857mm x 125mm
100
ROUND FILTERS M18LR007LC
VARIETY OF DIAMETERS, LENGTHS AND MESH SIZES
SOCKS OR SLEEVES TO SUIT YOUR FILTER SYSTEM GLUED OR SEWN SEAMS
20g
240mm Dia
2000
HIGHEST QUALITY STANDARDS
www.milkrite.com
www.milkrite.com
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
19
EU/PC/ENG/V2
ACCESSORIES
ACCESSORIES
MILKRITE SHOP
TOOLS / IMPULSE AIR TEST KIT
CLOTHING
MILKRITE REFERENCE
GARMENTS
IMPULSE AIR KIT COMPLETE
SIZES
MILKRITE WINTER COAT NAVY WITH WHITE MILKRITE LOGO
S-XXL
MILKRITE FLEECE NAVY WITH WHITE MILKRITE LOGO
S-XXL IMPULSE AIR CAP WINTER COAT
MILKRITE BODYWARMER NAVY WITH WHITE MILKRITE LOGO
S-XXL
COTTON POLO SHIRT NAVY WITH WHITE MILKRITE LOGO
S-5XL
MILKRITE CAP NAVY WITH WHITE MILKRITE LOGO
ONE SIZE
IMPULSE AIR BODYWARMER BLACK WITH GOLD IMPULSE AIR LOGO
S-XXL
IMPULSE AIR CAP BLACK WITH GOLD IMPULSE AIR LOGO
ONE SIZE
FLEECE
BODYWARMERS
PROMOTIONAL GOODS
20
EU/PC/ENG/V2
DESCRIPTION
POLO SHIRT
M16AV050XZ (PREMIUM KIT)
Premium Kit contains: PM35 Tester, IP14 Mounting Tool, Teat Cup Plugs, Liner Removal Tool, Stainless Steel Liner Removal Tool, Latex Gloves, Digital Vernia, Pulsation Restrictors, Pulsation Silencer, Touch Point Pressure Tester, NoKor ADMIX Needles, Batteries.
M16AV051XZ (STANDARD KIT)
Standard Kit contains: IP14 Mounting Tool, Teat Cup Plug, Liner Removal Tool, Stainless Steel Liner Removal Tool, Latex Gloves, Digital Vernia, Pulsation Restrictors, Pulsation Silencer.
SPARE PARTS M08AV005XZ
ASSEMBLING TOOL FOR SHORT LINERS
M08AV019XZ
SCISSOR ACTION LINER REMOVAL TOOL
M08AV006XZ
TEAT CUP PLUG
M20AV031SP
LEVER ACTION LINER REMOVAL TOOL
M16AV049XZ
LATEX GLOVES (PACK OF 5)
M16AV048XZ
DIGITAL VERNIER CALIPER
M16AV053XZ
AAA BATTERIES (PACK OF 10)
MILKRITE REFERENCE
DESCRIPTION
M08AV017XZ
PULSATION RESTRICTORS
M16AV052XZ
MILKRITE USB STICK 2GB
M24AV014XZ
PULSATION SILENCER
M16AV003XZ
MILKRITE STRESS COW
M24AV048XZ
PM35 TESTER
M16AV001XZ
MILKRITE APRON
M08AV020XZ
TOUCH POINT PRESSURE TESTER
M08AV021XZ
NOKOR ADMIX NEEDLES (PACK OF 5)
M16AV045XZ
HARD CASE
www.milkrite.com
www.milkrite.com
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.
21
EU/PC/ENG/V2
MILKRITE USA
MILKRITE EUROPE
MILKRITE CHINA
North America East: 110 Lincoln Street / PO Box 9 / Johnson Creek / Wisconsin / 53038-0009 / USA Tel: +1 920 699 3431 Fax: +1 920 699 2344
Hampton Park West / Semington Road / Melksham / Wiltshire / SN12 6NB / UK Tel: +44 (0) 1225 89 64 26 Fax: +44 (0) 1225 89 63 07
Avon Dairy Solutions (Shanghai) International Trading Co Ltd. B1/Building 44 / D12 / No.207 Taigu Road / Waigaoqiao Free Trade Zone / Pudong District / Shanghai / China / 200131 Tel: +86 21 22060366 Fax: +86 21 22060369
North America West: 4824 Enterprise Way / Modesto / California / 95356 / USA Tel: +1 209 545 0198 Fax: +1 209 545 0272
Dealer Stamp
www.milkrite.com
The Milkrite name and logo are the registered trademarks of the Avon Rubber p.l.c. group of companies. Avon Rubber p.l.c. Registered in England with number 32965 with its registered office at Hampton Park West, Semington Road, Melksham, Wiltshire, SN12 6NB, UK. Avon Rubber p.l.c. All rights reserved.
EU/PC/ENG/V2