Mento Oilfield supply products by Mento-AS

INDEX Mento Oilfield Supply INDEX Mento Oilfield Supply 1.

Jet Lube / Houghton Int.

Triplex Pump Parts

Centrifugalpumps & Parts / General Pumps

P-Quip

API Equipment

Protectors / Lifting Bails

Drill Pipe Float Valves / Kelly Valves

Pipe Wipers

Accumulators

10.

Supply

Reservations of failure and changes in this catalogue

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

Jet Lube Hougthon Jet Lube • • • • • • • • • • • • • • Houghton • • • • •

NCS-30 ECF HPHT RUN-N-SEAL ECF SEAL-GUARD ECF ALCO-EP ECF JACKING SYSTEM GREASE ECF ALCO-EP 73 PLUS JET-LUBE EZY-TURN® #12 VALVE SEALANT JET-PLEX-EP™ LITHIUM COMPLEX GREASE JET-LUBE EZY-TURN® #3 VALVE SEALANT JET-LUBE EZY-TURN® #5 GENERAL PURPOSE PLUG VALVE SEALANT KOPR-KOTE API MODIFIED JET-LOK II BOP CONTROL FLUIDS RISER TENSIONER HYDIABLIE FLUID SUBSEA CONTROL FLUIDS CORROSION PREVENTATIVES PRESSERVATION FLUIDS 2. EDITION

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

Lubricants and Sealants for Oilfield, Tubular and Valve

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon Extreme Technology for extreme Conditions Through more than 65 years of research, development, testing and manufacturing, Jet-Lube has developed a broad line of grease products for Industrial, MRO, Marine, Food Grade, and OEM applications: Anti-Seize Compounds, EP Greases, Thread Sealants, Lubricants, Anaerobics, Penetrants and General Purpose Lubes & Cleaners. Every Jet-Lube product is meticulously developed, manufactured and inspected to the industry’s most comprehensive and rigorous quality control stan-

dards. Jet-Lube is proud to have been ISO Certifi ed since 1993. With manufacturing plants in Houston, Edmonton and the United Kingdom, Jet-Lube has earned its place as a world-wide leader in the lubrication industry. Whatever your application, Jet-Lube has the right product to solve your lubrication needs. Through our experienced R&D lab, Jet-Lube has the ability to create customized products for unique conditions, environmental regulations and to meet the toughest application requirements.

HPHT™

Jet-Lube HPHT THREAD SELANT Size kg 15 20 4

Part no. 36413 36415 36423

HPHT™, HIGH PRESSURE HIGH TEMPERATURE thread compound, has been specifi cally formulated to meet high performance requirements of proprietary, metal-to-metal seal and high-interference connection. It is designed utilizing today’s high-performance materials, which include “super” chrome and high-alloy steels. The particle size was selected which also allows it to seal 8-round and buttress thread forms. For large clearance, thread seal connection designs, RUN N SEAL ECF is advised. HPHT™ thread compound is an advanced base grease that is a carefully selected balance of synthetic oils with a biodegradable grease thickener technology. HPHT™ thread compound provides excellent adhesion and stability yet biodegrades and is environmentally safe based upon the HOCNF guidelines. The result is superior lubrication and ancillary sealing under high loads with galling resistance equivalent to heavy metal-based compounds in a totally metal-free formulation. In lab tests, HPHT™ thread compound has a friction factor equivalent to API MODIFIED. However, there may be connection types with which a higher/lower friction factor is incurred.

BENEFITS: • Biodegradable and eco-safe, metal free • Low volatility at temperatures up to 232°C • Frictional properties equivalent to API MODIFIED • High fi lm strength to protect against galling • Balanced solids content and size to accommodate premium me chanical seal and 8-round connection design requirements • Ideal for use on highchrome connections • Sticks to wet or oily threads • OSPAR Commission-HOCNF • Classifi cation: “YELLOW” Norway • Classifi cation: “E” United Kingdom & Netherlands • Friction Factor 1.0 • Service Rating: -30°F (-34°C) to >450°F (232°C) • NLGI Grade 1 DESIGNED FOR: Designed for high performance requirements of proprietary, metal-to metal seal and high interference connections, specially formulated for use on “super chrome” and high alloy steels.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon Premium Metal-Free Drill Collar & Tool Joint Compounds

Oilfield Specialty Greases

NCS-30® ECF™ Tool Joint & Drill Collar Compound

ALCO-EP™ ECF™ Extreme-Service Greased

Size 4.5 kg 20 kg 250 kg

This biodegradable, nonmetallic formula meets Norway “Yellow”, British and Dutch “E” HOCNF classifi cations. Extreme-pressure and anti-wear additives control friction and galling. Resists wash-off and sticks to wet pipe. Withstands invert and high-pH muds and is nonconductive for MWD. Excellent for high-chrome or nickel-alloy connections Part no. in extreme-temperature service. 23715S JA16917 Service Rating: -10°F (-23°C) to 500°F (260°C) JA23729

OCTG Running Compounds

Size 10 kg 16 kg 400 g cartridge 180 kg

Part no. JA37114 JA37116 JA 37150 JA37129

JET-LUBE® SEAL-GUARD™ ECF™ Yellow/”E”-Rated Premium Connection Thread Compound Ospar Commission-HOCNF (Harmonized Offshore Chemical Notifi cation Format) • Classifi cation: “Yellow” rating for Norway • “E” for the United Kingdom and Netherlands Size 20 kg 4.5 kg 225 kg

Part no. 20915 JA20923 A14415

JET-LUBE SEAL-GUARD ECF has been specifi cally formulated to meet the performance requirements of proprietary, metal-to-metal seal and high-interference connection designs utilizing today’s high-performance materials, which include “super” chrome and high-alloy steels. The smaller particle size distribution may not provide optimum sealability on 8-round and buttress thread forms. Biodegradable • Metal free • Frictional properties similar to API MODIFIED Service Rating: -20°F (-29°C) to 500°F (260°C)

Service Rating: -25°F (-32°C) to 450°F (232°C)

Premium Copper-Based Drill Collar & Tool Joint Compounds

KOPR-KOTE® Premium Drill Collar & Tool Joint Compound

Size 500 g 20 kg

KOPR-KOTE is widely regarded as the best copper-based drilling compound in the world. It is also one of the few copper compounds to be granted a marine-pollutant exemption by the DOT. KOPR-KOTE is uniquely formulated to prevent excessive circumferential make up and has a very high static friction factor that helps prevent downhole joint make up when excessive drilling torques are encountered. It prevents galling and Part no. seizure and allows easy breakout. KOPRJA10004 KOTE is recommended for all oilfield JA10193 threads: drill pipe, collars, tools and jacking systems. Service Rating: Standard: 0°F (-18°C) to 450°F (232°C), Thermal: 0°F (-18°C) to 700°F (370°C), Arctic: -65°F (-55°C) to 300°F (149°C), NSF H2 Registered

RUN-N-SEAL® ECF™

Non-Premium Thread Connection Sealant Ospar Commission-HOCNF (Harmonized Offshore Chemical Notifi cation Format) • Classifi cation: “Yellow” rating for Norway • “E” for the United Kingdom and Netherlands

Size 20 kg

A metal-free extreme temperature, highpressure sealant alternative for nonPart no. premium, nonshouldered, large and small JA29215 diameter threads connections. Its rust inhibiting formula provides an excellent seal. RUN-N-SEAL ECF is brushable over a wide range of temperatures and has excellent inherent water resistance. It sticks to wet and oily steel, ensuring the compound will not wash off threads. Service Rating: 0°F (-18°C) to 450°F (232°C) Friction factor 0.9 Relative to API Modified

Ospar Commission-HOCNF (Harmonized Offshore Chemical Notifi cation Format) • Classifi cation: “Yellow” rating for Norway • “E” for the United Kingdom and Netherlands A premium, state-of-the-art, multipurpose, biodegradeable grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance. An excellent choice for subsea or other conditions where extreme water resistance is necessary, its non-plating, organic EP/ anti-wear additives allow ALCO-EPTM ECFTM to be used where tolerances are low and/or speeds are high.

API Compounds

API-MODIFIED Thread Compound Sealant

Size 5 kg 25 kg

API-MODIFIED is a high-pressure thread compound that conforms to and exceeds the requirements of API Bulletin 5A2 and R.P. 5A3. It is formulated with JET-LUBE’s unique grease base, which tenaciously adheres to wet or oily surfaces and provides brushability throughout the service range. API-MODIFIED seals and withPart no. stands pressures to 10,000 psi, resists A22190 wash-off and will not harden or dry. A22193 Service Rating: 0°F (-18°C) to 300°F (149°C)

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

Application Chart

Storage Compound Short Term (6 months or less)

Storage Compound Long Term (> 6 months)

Anti-Seize Compounds (Stud Bolts, Motor Housings)

Kelly Swivels

Rotary Table Bushings

Winch & Crane Gears

Wire Rope & Cable

Jack-Up Legs

RIG MAINTENANCE

Fiberglass Connections

Scrunch Type Connectors

Premium Connections (Metal-to-Metal Seals)

API/Buttress - Large Diameter

API/8-Round, Line Pipe

Proprietary/Non-API

Large Diameter (.9.5 “O.D.”) Rotary Shoulde Connections

Non-Magnetic/CRA (Corrosion, Resistant Alloy)

Drill Collars & Tool Joints - Light Duty

Tool Joints - Light to Medium Duty

Tool Joints - Severe Duty

Drill Collars - Light to Medium Duty

Drill Collars - Severe Duty

PRODUCTS

API/Buttress

PRODUCTION/ COMPLETION

DRILLING

METALLIC PRODUCTS JET-LUBE EXTREME KOPR-KOTE*

X X

JET-LUBE 21*

X X X

JLS* KOL’R-KING** Z-50 Z-60

X X X

X X X X

X X

X X X X

X X

X X X

API-MODIFIED** ENVIRO-SAFE

X X

NNON-METALLIC PRODUCTS NCS-30* POW’R-KOTE

X X

KOV’R-KOTE* WHITE LIGHTNING

X X X X

X X

X X X X

X X

X X X

X X

RUN-N-SEAL EXTREME*

X X

JET-LUBE SEAL-GUARD

TF-15

X X

X X X

KORR-GUARD

CURAL

X X

OG-H

X X

AP-5 ALCO-EP 73 PLUS

X X

ENVIRONMENTALLY SAFE PRODUCTS NCS-30 ECF

SEAL-GUARD ECF HPHT ALCO-EP ECF

X X

RUN-N-SEAL ECF

X X

JACKING SYSTEM GREASE ECF X X *Available in Arctic/All Weather Grade (AWG)/Thermal Grade. **Contain Lead. For more information contact Mento.

X X

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon Thread Compound Usage Drill Collar & Tool Joint Size 4.5”

5”

5.5” 6.625”

7” 7.625” 8.625” 9.625”

2.75 51

3.00 46

3.75 42

4.25 34

5.50 30

2.375” 2.875” 3.5”

3.5”

Compound OZ/PIN Joints* PINS/GAL

7.25 23

9.00 17

9.50 14

Tubing Size Compound OZ/PIN Joints* PINS/GAL

.66 194

.80 160

.88 128

1.12 114

4.5”

5”

5.5” 6.625”

Casing Size 4.5 Compound OZ/PIN 1.88 2.09 2.30 2.76 Joints* PINS/GAL 68 61 55 46 *When applying compound to one pin or box

7” 7.625” 8.625” 9.625” 10.75” 11.75” 13.375” 18.625” 16” 20” 2.93 44

3.19 40

3.61 35

4.03 32

4.50 28

4.92 26

5.60 23

6.70 19

7.79 8.37 16 15

Oilfield Specialty Products

Oilfield Anaerobics/Accessories

KORR-GUARD

JET-LOK® II High-Friction and Sealing Compound

™

Size 16 kg

Storage Compound

KORR-GUARD is a water-displacing, semi-fluid grease. It easily flows into the thread roots, displacing moisture, cutting oils and residual threading materials. KORR-GUARD will allow the thread protectors to completely engage the pipe threads and will aid in eliminating moisture penetration to the newly threaded or recut threaded areas. Part no. KORR-GUARD will not run or drip off the JA78516 threads. This unique blend of rust and corrosion inhibitors made into a grease-type product is ideal for short or long-term storage of casing, tubing, drill pipe, or any metal surface requiring protection from the elements. Ideally suited for highly humid or salt water environments. KORR-GUARD can be applied by brush. It will not harden over time, so product can be removed by using a rag or cleaner. Service Rating: -40°F (-40°C) to 425°F (218°C)

Oilfield Specialty Anti-Seizes

RISER BOLT LUBE Nonmetallic, High-Moly Anti-Seize Compound

Ideal for subsea riser bolt applications and all maintenance needs. RISER BOLT LUBE requires no thinning and will not harden, evaporate, or settle out. The Molybdenum disulfi de (MoS2) component bonds itself into steel working surfaces providing a longterm, low-friction shield that protects working parts, prevents galling, seizure, stick-slip, heat freeze and corrosion while sustaining lubrication. The rust-inhibiting base carrier in RISER BOLT LUBE is barium free, so it’s safer for marine life in offshore installations. With a salt fog resistance of >2000 hours at 5% NaCl, RISER BOLT LUBE is far superior to that of conventional grease carriers for long-term protection. Service Rating: -300°F (-185°) to 750°F (400°C)

Size Treadlock kit 202 16 oz 8 oz

Part no. JA60845 JA60868 K60867

A two-part epoxy with metallic fillers to permanently lock threaded connections under normal operating conditions. Improved catalyst adds pot life and durability with lower toxicity and rapid curing. For use on all threaded joints or fasteners where an exceptionally strong and durable bond is required. Especially useful on casing and other tubulars where the effective prevention of joint loosening is required. Also recommended for use on casing shoes, couplings and collars, eliminating the need for gas/arc welding. Friction factor for Tubing and Casing is 1.3 to 2.0 depending on the thread design contact pressure. Drill Strings are 1.0. Service Rating: up to 400°F (204°C)

EASY CLEAN TOWELS™ EASY CLEAN TOWELS™ are a waterless cleaner that cuts through tar, grease, wax, ink, paint, lubricants and adhesives. These non-scratching, citrus scented wipes are industrial strength but also gentle, fortifi ed with an emollient and natural oils, so they won’t crack or dry skin. Extremely versatile! EASY-CLEAN TOWELS™ hand cleaning wipes not only clean hands, but tackle almost any job, from wiping up oily spills to cleaning stainless steel tools. For use on: hand cleaning, touch-up cleaning, wiping up oily spills, cleaning stainless steel tools and waterless cleaning.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon Valve Sealants & Lubricants

EP Greases

EZY-TURN® #2

ALCO-EP-73 PLUS™ Premium Multipurpose Grease

Size 16 kg

Part no. JA90516

EZY-TURN® #3

Size 20 kg

FRAC Valve Lubricant A hydrocarbon-resistant, general-purpose gate valve sealant. This lubricant is blended from chemically stable and naturally corrosion-resistant vegetable oils. EZY-TURN #2 contains no solid fillers and is easily pumped with a highpressure lubricator at temperatures as low as 0°F (-18°C). Applications: Condensate, crude, kerosene, jet fuels, dilute acids, dilute alkalies, hydrocarbon gases and hydrocarbon liquids. Service Rating: 0°F (-18°C) to 450°F (232°C) Color: Amber

Valve Sealant

Specifi cally designed for light-hydrocarbon liquids and gases, making it the sealant of choice for pipeline and compressor stations. Pumps easily in temperatures as low as 0°F (-18°C) with a high-pressure lubricator. With a blend of vegetable oils and molybdenum disulfi de (MoS2) as a solid lubricant, EZY-TURN #3 resists all aliphatic hydrocarbons, protects internal plug surfaces and reduces valve operating Part no. torque. Applications: Aliphatic JA93193 hydrocarbons, butane, fuel oils, hot gases, LPG, natural gas and propane. Service Rating: 0°F (-18°C) to 500°F (260°C) Color: Black

EZY-TURN® #12

Size 16 kg 4.5 kg

Seat Sealant, Creamy Peanut Butter

EZY-TURN #12 is a “peanut butter” type product designed for expanding and other gate valves with body cavities. Recommended for applications where gas or liquid hydrocarbonresistance is required. It is also an ideal generalpurpose sealant. EZY-TURN #12 is formulated from vegetable oils and polymers to reduce torque during valve operation while providing a leakPart no. proof seal. EZY-TURN #12 injects into JA95516 the valve body using a high-pressure lubricator. JA95522 Applications: Aliphatic hydrocarbon liquids, crude, dilute acids and alkalies, fuel oils, gasoline, natural gas and water. Service Rating: 0°F (-18°C) to 250°F (121°C) Color: Brown

Size 16 kg 4 kg 400 g

Part no. JA37716 JA37723 JA37750

-25°F to 450°F (-32°C to 232°C) • Superior rust and corrosion protection • Dropping point 500°F (260°C) • Polymer additives for extreme water resistance • Color - Red • Exceeds Military spec MIL-G18458B-SH ALCO-EP-73 PLUS is a premium, state of the art, multipurpose aluminum complex grease containing a highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives for maximum performance characteristics. ALCO-EP-73 PLUS also contains polymer additives further enhancing the inherent water resistance of an aluminum complex based grease. ALCOEP-73 PLUS is extremely resistant to rust and corrosion and ideally suited for use in high moisture areas. Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. The highly developed additive package makes ALCO-EP-73 PLUS the premier, multipurpose grease for hostile environments. 37762 – 10 oz. Squeeze Tube, 37750 – 14 oz. Cartridge, 37716 – 35 lbs. (5 gal.), 37724 – 120 lbs. (15 gal.), 37729 – 400 lbs. (50 gal.)

JET-PLEX-EP™

Premium Multipurpose Grease

0°F to 425°F (-18°C to 232°C)• Will not run or pound out • Pumpable hot or cold • Extremely resistant to rust and oxidation • Color - Red • Available in NLGI 1 and NLGI 2 grades JET-PLEX-EP is the ideal multipurpose grease for use in extreme pressure and high temperature operating conditions. JET-PLEXEP is manufactured from carefully selected petroleum oils and lithium complex soap to create a multipurpose grease with a dropping point of 550°F (288°C). JET-PLEX-EP has excellent Size Part no. resistance to water and water washout. JET400 g JA31750 PLEX-EP is formulated with special lubricity, 12.5 kg JA31712 anti-wear, and extreme pressure additives and fortifi ed with rust, corrosion and oxidation inhibitors. JET-PLEX-EP is recommended for all types of bearing and sliding applications, for shock-loading, pounding, rough chassis usage and high loads. 31750 – 14 oz. Cartridge, 31705 – 1 lb. Can, 31706 – 5 lbs. Can, 31716 – 35 lbs. (5 gal.), 31724 – 120 lbs. (15 gal.), 31729 – 400 lbs. (50 gal.)

Moustache Brushes

Thread Compound

Brush is approximately 1.0” wide. Used to apply thread compound to casing and tubing connections in those cases where minimal quantities are required. 06100 – 8” long with a 45º handle

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

STACK-MAGIC ECO-F V2 BOP wellhead control fluid providing optimum performance characteristics in global locations DESCRIPTION

Houghton Offshore have stamped their mark of authority on the subsea BOP fluid market with the early development and introduction of the “StackMagic” BOP fluid brand name. Major drilling rig operators, who demand the most environmentally and technologically advanced products available in the market, have used stack-Magic BOP fluid concentrates successfully for many years. As a result this high quality product backed by attentive customer support laboratories is now specified worldwide. Houghton Offshore is a major supplier of water-based technology to the Offshore Industry and we recognize and continue to respond to the ever-increasing demands to maximize environmental acceptability with optimum performance in safety critical equipment. Stack-Magic-ECO-F v2 has been formulated to meet the current CEFAS and OSPAR requirements and falls into the “yellow” zone for use in Norway and is classified as an “D” within the UK chemical notification scheme with no substitutions.

DATA (TYPICAL VALUES)

Appearance pH (ASTM D-1293) Kinematic Viscosity (IP71 ASTM D-445) Kinematic viscosity @ 40ºC, cSt Kinematic viscosity @ 20ºC, cSt Kinematic viscosity @ 4ºC, cSt Kinematic viscosity @ -10ºC, cSt 17.0 Specific Gravity at 15.5ºC Flash Point (IP35 ASTM D-92 Freeze Point (IP 12 ASTM D-97) Pour Point (IP 12 ASTM D-97)

Light red fluorescent fluid 10.0 2.5 4.6 8.5 1.0505 None -20ºC -17ºC

FEATURES • • • • • • • • •

Environmentally acceptable for maximum discharge Improved corrosion protection in the presence of seawater Improved vapour phase corrosion protection Low temperature stability Hard water stability Can be mixed with monoethylene glycol Good filterability Better resistance to microbial infection Fluorescent dye for leak trace detection

HEALTH AND SAFETY

Refer to MSDS for proper handling and disposal. Please note that the MSDS includes handling, health and disposal information which should be passed on to your employees, and to anyone else who comes in contact with our product. Additional advice can also be obtained from your local Houghton representative. NOTE: Read and understand all precautions on container labels before using this product.

Solution Appearance

Fluorescent pink

pH (ASTM D-1293 at 1%)

9.3

pH (ASTM D-1293 at 2%)

9.4

pH (ASTM D-1293 at 5%)

9.8

Corrosion Tests IP 135A

Pass at 0.25%

IP 135B/ASTM D-665B

Pass at 0.25%

IP 135B + 20 % seawater

Pass at 1 %

Stability Seawater

Up to 40% (in 2% Stack Magic-ECO-F v2)

Hard Water

Up to 250ppm (in 2% Stack Magic-ECO-F v2)

Low Temperature Freeze Protection Low Temperature Mixing Chart Freeze Protection: Stack-Magic-ECO-F v2 is compatible with Mono Ethylene Glycol. Necessary freeze protection can be achieved by addition of MEG made in accordance with the mixing chart. Operational Stack-MagicTemp (°C) ECO-F v2 (parts by volume) 0 1 -5 1 -10 1 -15 1 -20 1 -25 1 -30 1 -35 1 -40 1 -45 1 -50 1

Ethylene Glycol

Fresh Water

(parts by volume) 5 15 25 32 37 42 46 52 54 57 60

(parts by volume) 94 84 74 67 62 57 53 47 45 42 39

Important Notes for Make-Up Water for Dilutions of Stack-Magic-ECO-F v2

Mixing water • •

Potable water should only be used for making up solutions of Stack-Magic ECO-F v2 Maintain excellent control of water hardness quality minimizing the amount of hardness measured as CaCO3 (ppm) according to the guidelines on the Table for Optimum Water Characteristics, shown Below.

Mixing water cleanliness

• Potable mixing water should be maintained at a cleanliness level of < NAS class 8 (ISO 17/4)

Optimum Potable water Characteristics Appearance Sediment Odor Water hardness Best pH of neat water Bacterial count Fungal count Yeast count

Transparent clear colorless liquid Must be free from solids or other contamination Odorless <120 ppm as CaCO3 using the following guidelines: (<50ppm) Preferred (<120ppm), Maximum (<250ppm) 6–8 <10*2 cfu/ml <10*1 cfu/ml <10*1 cfu/ml

Important Notes for Make-Up Water for Dilutions of Stack-Magic ECO-F v2 Under no circumstances should Stack-Magic ECO-F v2 be exposed to make-up water containing calcium hypochlorite tablets (sometimes used to prepare potable water). Houghton Offshore does not guarantee the hard water stability or lubrication performance if such calcium tablets are used. Sodium hypochlorite is an acceptable alternative for preparing BOP make-up water for mixed use as potable water.

BOP Fluid Mixing recommendations

DO • Mix in clean systems only treated with disinfectant. • Always use clean potable water, filtered according to NAS Class codes and with minimum hardness, according to guidelines shown in above Table. • Avoid contamination with mineral oil, oil-containing compounds. • Check concentration after mixing with refractometer/chemical test kit. • If adding anti freeze always use good quality monoethylene glycol. • Always maintain recommended concentrations. • Send monthly routine maintenance samples to closest Houghton Fluidcare location. DO NOT • Do not use Drill water or imported water to mix BOP fluid concentrate, as the water quality may fall outside of the Water Hardness guidelines on the Table for Optimum Potable Water Characteristics, as shown above.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon General Data Metals Compatibility

Stack-Magic-ECO-F v2 is suitable for use with steel, cast iron, copper, bronze, brass and anodised aluminium. Zinc, cadmium lead and magnesium should be avoided.

Seals & Elastomers

Stack-Magic-ECO-F v2 is suitable for use with nitrile, butyl, ethylene propylene, silicon and Viton seals. PTFE and water-tolerant nylon are also acceptable. The product is not compatible with some polyurethaneâ&#x20AC;&#x2122;s. Seal material properties can vary within a classification depending upon compounding techniques. Compounding can enhance or diminish various properties and characteristics. In the case of Buna â&#x20AC;&#x153;Nâ&#x20AC;? and Viton certain formulae will be more resistant to water than others. This can also be said for some of the urethanes. Leather and cork are best avoided. Consult your packing and seal supplier for specific recommendations.

Paint

Likely to have a softening and stripping action on conventional paints. Where conventional paint coatings have to be replaced, those with an acrylic, epoxy or silicone base should be suitable.

Storage

The product should be ideally stored in dry conditions.

Packaging

Stack-Magic-ECO-F v2 is available in 205 litre barrels, 1000 litre bins and 2000 litre totes.

Customer Service

Houghton Offshore provides a free of charge comprehensive technical support service to all customers providing laboratory sample analysis, advice and guidance on all fluid associated problems.

Warranty

Export Statement

This commodity and its technology are subject to the export control laws and regulations of the United States Government. Buyer agrees that it shall not make any disposition, by way of export, diversion, and transhipment, reexport or otherwise, except as expressly permitted under United States law.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

HOUGHTO-SAFE TL12

MATERIALS COMPATIBILITY

Tension Leg and Subsea Control Fluid APPLICATION

Houghto-Safe TL12 fills the legs of the revolutionary Conoco Hutton Field TLP, providing an hydraulic transmission medium for latching and unlatching the leg anchor connectors. Houghto-Safe TL12 has been designed to provide corrosion protection and bacterial resistance in static hydraulic systems for up to 20 years.

ADVANTAGES

• Low compressibility providing reliability, reduced pressure losses and instant response times • Excellent stability in high concentrations of sea water contamination • Inhibited to prevent corrosion of ferrous and non-ferrous materials • Long-term resistance to bacteria and fungus • Excellent lubricity • 20 year design stability

PHYSICAL PROPERTIES Test Specific Gravity at 15.5ºC Viscosity at 20°C 40ºC 4°C

1.065

Test Corrosion Test IB135B (10% sea water)

Pass

Pour point

-40ºC

Appearance

24 cSt 12 cSt 46 cSt Red, clear and bright

Flash point

None

pH value

9.4

Fluid type

Water Glycol

MICROBIOLOGICALLY RESISTANT TO Bacteria Fungi/Moulds and Yeast

Enterobacter Aerogenes Bacillus Sp. Escherichia Coli Proteus Sp. Pseudomonas Sp. Putida Auriginosa Aspergilus Sp. Mucor Sp. Penicilium Sp. Rhizopus Sp. Trichoderma Sp. Candida Albicans Candida Sp.

Elastomers Houghto-Safe TL12 is generally compatible with natural rubber and pure synthetic rubber packings and seals such as Buna “N” (nitrile), butyl, Viton, Teflon, nylon and silicone. Seal material properties can vary within a classification depending upon compounding techniques. Compounding can enhance or diminish various properties and characteristics. In the case of Buna “N”. certain formulae will be more resistant to water than others. This can also be said for some of the urethanes. Leather and cork are best avoided. Consult your packing and seal supplier for specific recommendations. Paint Likely to have a softening and stripping action on conventional paints. Where conventional paint coatings have to be replaced, those with an acrylic epoxy or silicone base should be suitable. Metals Iron, steel, copper, brass, tin, nickel and stainless steel are all compatible. Cadmium, zinc, lead and magnesium are not recommended and should be avoided or replaced. Aluminium should be anodised before use. Filters Borasilic glass micro filters, cellulose and phenolic resin treated filters are suitable for use. Houghto-Safe TL12 is filtered to meet NAS1638, Class 6 Cleanliness level and is supplied in new lacquerlined barrels, which are visually examined before filling. Further information relating to systems compatibility is available on request.

STORAGE

Unless otherwise marked all industrial lubricants and allied products should be stored in dry conditions. Tops should be replaced on all containers when not in use. All drums, tanks and containers should be clearly marked with the contents and should be used in delivery rotation.

PACKAGING

Houghto-Safe TL12 is available in 205 litre lacquer-lined barrels.

HEALTH AND SAFETY

Health and Safety Data Sheets are supplied to customers to comply with Section 6 of the Health and Safety at Work Act 1974, and should be closely studied prior to handling or use of the product. Copies are available from your Technical Health and Safety Officer. Various other advisory publications are available from the Health and Safety Executive and Her Majesty’s Stationery Office. All data given in this Product Data Sheet are typical of this material. It does not however constitute a specification. We reserve the right to modify products without prior notice. All products, services and information supplied are provided upon the terms of our standard Conditions of Sale from time to time in force.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

HOUGHTO-SAFE 273CTF Motion Compensator/Riser Tensioner Hydraulic Fluid DESCRIPTION

Houghto-Safe 273CTF is a fire resistant nonexplosive water glycol hydraulic fluid which incorporates additives which insure long fluid life, excellent pump wear characteristics, protection against corrosion and resistance to microbiological contamination. Recommended for use in motion compensators, drill string and riser tensioners and closed loop hydraulic wellhead control systems.

DATA (TYPICAL VALUES)

Appearance Kinematic Viscosity @ 40°C (104°F) @ 20°C (68°F) @ 0°C (32°F) @ -10°C (14°F) Specific Gravity @ 15.5°C (60°F) Pour Point Flash Point Fire Point pH Value Corrosion Inhibition IP 135A ASTM D-665 MIL-H-22072C Foaming IP 146 ASTM D892 Sequence 1 Time to complete Collapse 22 sec.

Clear pink/red fluid 40 cSt 85 cSt 220 cSt 550 cSt 1.072 -40°C (-40°F) None None 9.5 Pass - no rusting Pass - no rusting Pass ml/20/nil

FEATURES

• Formulated to meet 50:1 compression ignition test as specified in the U.S. Navy Specification MIL-H-22072C • Contains no nitrites and is biodegradable • Non sheening • Low pour point • Compatible with the majority of elastomers found in today’s hydraulic systems • Is corrosion inhibited, both in liquid and vapor phase • Outstanding resistance to bacterial and fungal growth • No pressure limitations. Pressures governed by equipment limitations • Low foaming. High viscosity index

HEALTH AND SAFETY

CLEANLINESS LEVEL

Houghto-Safe 273CTF is filtered during production and supplied in steel barrels, which are visually examined before filling.

COMPRESSION IGNITION

has occurred. This is followed by two additional 15 second runs each preceded by 45 seconds of mooring without injection. Successive determinations are made with progressively reduced compression ratios until no combustion occurs. The maximum combustion ratio is compared with that for a reference fluid of established fire resistance properties. MIL-H-22072C is the only specification in the world that requires a fire resistance fluid to pass a 50:1 compression ignition test. Houghto-Safe 273CTF passes this test. It is important to note that this increase in safety margin is not brought about merely by the use of water glycol type fluid nor by the presence of water in the formulation.

COMPATIBILITY WITH SYSTEM COMPONENTS

When considering fire resistant hydraulic fluids, either in the design or installation stage it is essential to have in mind their degree of compatibility with materials normally encountered in hydraulic systems. The following table describes in general terms the compatibility of Houghto-Safe 273CTF with a variety of materials and is intended as a useful guide. It is advisable, however, finally to check compatibility at least with the material supplier. C = Compatible NC = Not Compatible LC = Limited Compatibility Metals Ferrous C Copper and Brass C Bronze LC Bronze should have a maximum lead content of 20% Cadmium and Zinc NC Lead NC Aluminum LC Anodized aluminum completely compatible; unanodized varies in performance Magnesium NC Tin and Nickel C Paints and Finishes Common Industrial Oil Resistant NC Epoxy and Phenolic C Vitreous Enamel C Plastics Acrylic (includes Perspex) C Styrene C

Materials Compatibility

*Seal material properties can vary within a classification depending upon compounding techniques. Compounding can enhance or diminish various properties and characteristics. In the case of Buna “N” certain formulae will be more resistant to water than others. This can also be said of some of the urethanes. Leather and cork are best avoided. Consult your packing and seal supplier for specific recommendations.

Filter Media

Cellulose Phenolic Resin Treated Metallic Earth Type

C C NC

CORROSION RESISTANCE

Houghto-Safe 273CTF is non-corrosive to ferrous and non-ferrous metals and readily passes Test Method IPA 135A. The Vapor Phase inhibitor which is incorporated into Houghto-Safe 273CTF also provides protection to metal surfaces above the fluid level.

If we consider that air when instantaneously compressed from atmospheric pressure to 1000 psi reaches an air temperature of 700°C (1292°F), then it can be understood that sudden higher compressions in compensator systems could raise the temperature sufficiently to constitute a fire or explosive risk. Hydro-pneumatic compensator systems usually incorporate long runs of high pressure pipe work with air over oil interface in their design. Systems of this type can be subjected to sudden extreme rises of temperature following instantaneous compression of the air, which acts due to its compressibility as the spring medium. In the mid 50’s the American Navy suffered catastrophic explosions due to the auto-ignition of mineral oil in two aircraft carrier catapult systems. These disasters established the requirements for a water based fluid to eliminate the possibility of auto-ignition occurring within the catapult mechanism, resulting in the Military Specification MIL-H-22072C.

SHIPPING INFORMATION

MIL-H-22072C COMPRESSION IGNITION TEST

EXPORT STATEMENT

Epoxy C Phenolic C Silicone C P.V.C. C Nylon C Polypropylene C P .T.F.E. C Rubbers (Elastomers Seal Materials) Natural C Neoprene C Nitrile C* Butyl C Ethylene Propylene C Polyurethane LC* Silicone C Viton (Fluorocarbon based) C Other Seal Materials Leather NC Cork NC (including rubber impregnated)

Houghto-Safe 273CTF is available in 55 (U.S.) gallon drums (205 liter barrels), tote bins and bulk.

STORAGE/HANDLING/DISPOSABILITY

No health or safety hazards exist when Houghto-Safe 273CTF is stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

WARRANTY

The information given here is considered to be correct and is offered for your consideration, investigation and verification. No warranties are expressed or implied, since the use of our products is beyond our control. Statements concerning the use of Houghton products are not to be construed as recommending the infringement of any patent. This commodity and its technology are subject to the export control laws and regulations of the United States Government. Buyer agrees that it shall not make any disposition, by way of export, diversion, transshipment, re-export or otherwise, except as expressly permitted under United States law.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

HOUGHTO-SAFE 105CTF Motion Compensator/Riser Tensioner Hydraulic Fluid DESCRIPTION

Houghto-Safe 105CTF is a fire resistant nonexplosive water glycol hydraulic fluid which incorporates additives which insure long fluid life, excellent pump wear characteristics, protection against corrosion and resistance to microbiological contamination. Recommended for use in motion compensators, drill string and riser tensioners and closed loop hydraulic wellhead control systems.

DATA (TYPICAL VALUES)

Appearance Kinematic Viscosity @ 40°C (104°F) @ 20°C (68°F) @ 0°C (32°F) Specific Gravity @ 15.5°C (60°F) Pour Point Flash Point Fire Point pH Value Corrosion Inhibition IP 135A ASTM D-665 MIL-H-22072C Foaming IP 146 ASTM D892 Sequence 1 Time to complete Collapse 22 sec.

Clear pink/red fluid 22 cSt 49 cSt 118 cSt 1.05 -40°C (-40°F) None None 9-9.5 Pass - no rusting Pass - no rusting Pass ml/20/nil

FEATURES

HEALTH AND SAFETY

CLEANLINESS LEVEL

Houghto-Safe 105CTF is filtered during production and supplied in steel barrels, which are visually examined before filling.

COMPRESSION IGNITION

MIL-H-22072C COMPRESSION IGNITION TEST

The specification involves a modified CFR (Co-ordinated Fuel Research) engine. The engine is motored for 45 minutes or longer at a 50:1 compression ratio to stabilize temperatures. The fluid is injected during a 15 second period of running, while oscilloscope pressure traces indicate whether combustion has occurred. This is followed by two additional 15 second runs each preceded by 45 seconds of mooring without injection. Successive determinations

are made with progressively reduced compression ratios until no combustion occurs. The maximum combustion ratio is compared with that for a reference fluid of established fire resistance properties. MIL-H-22072C is the only specification in the world that requires a fire resistance fluid to pass a 50:1 compression ignition test. Houghto-Safe 105CTF pass this test. It is important to note that this increase in safety margin is not brought about merely by the use of water glycol type fluid nor by the presence of water in the formulation.

COMPATIBILITY WITH SYSTEM COMPONENTS

When considering fire resistant hydraulic fluids, either in the design or installation stage it is essential to have in mind their degree of compatibility with materials normally encountered in hydraulic systems. The following table describes in general terms the compatibility of Houghto-Safe 105CTF with a variety of materials and is intended as a useful guide. It is advisable, however, finally to check compatibility at least with the material supplier. C = Compatible NC = Not Compatible LC = Limited Compatibility Metals Ferrous C Copper and Brass C Bronze LC Bronze should have a maximum lead content of 20% Cadmium and Zinc NC Lead NC Aluminum LC Anodized aluminum completely compatible; unanodized varies in performance Magnesium NC Tin and Nickel C Paints and Finishes Common Industrial Oil Resistant NC Epoxy and Phenolic C Vitreous Enamel C Plastics Acrylic (includes Perspex) C Styrene C

Epoxy C Phenolic C Silicone C P.V.C. C Nylon C Polypropylene C P.T.F.E. C Rubbers (Elastomers Seal Materials) Natural C Neoprene C Nitrile C* Butyl C Ethylene Propylene C Polyurethane LC* Silicone C Viton (Fluorocarbon based) C Other Seal Materials Leather NC Cork NC (including rubber impregnated)

Materials Compatibility

Filter Media

Cellulose Phenolic Resin Treated Metallic Earth Type

C C NC

CORROSION RESISTANCE

Houghto-Safe 105CTF is non-corrosive to ferrous and non-ferrous metals and readily passes Test Method IPA 135A. The Vapor Phase inhibitor which is incorporated into Houghto-Safe 105CTF also provides protection to metal surfaces above the fluid level.

SHIPPING INFORMATION

Houghto-Safe 105CTF is available in 55 (U.S.) gallon drums (205 liter barrels), tote bins and bulk.

STORAGE/HANDLING/DISPOSABILITY

No health or safety hazards exist when Houghto-Safe 105CTF is stored, used and disposed of in accordance with instructions given on the Material Safety Data Sheet for this product.

WARRANTY

EXPORT STATEMENT

This commodity and its technology are subject to the export control laws and regulations of the United States Government. Buyer agrees that it shall not make any disposition, by way of export, diversion, transshipment, re-export or otherwise, except as expressly permitted under United States law.

Mento Oilfield Supply Catalogue

1. Jet Lube / Hougthon

HOUGHTO-SAFE NL1 A solution for Direct Acting Riser Tensioners Houghto-Safe NL1 has been designed to cope with the demanding conditions, seen, particularly in direct acting tensioner systems. This is largely due to its high levels of mixed hydrodynamic and boundary lubrication properties, validated in long-term cylinder tests - with results indicating that it has superior properties compared to other currently available water-glycol fluids—in terms of wear on the rod coating and the seal configuration. Houghto-Safe NL1 has been given an OCNS rating of “D” by Cefas and is registered on the NEMs database for Norway with much reduced “red” content, the remainder being yellow/green. Existing fluids are currently rated B with Cefas so this is a 2 step improvement.

Technical Data Property Environmental Rating UK North Sea Environmental Rating Norway Appearance Specific Gravity @15.6°C pH Viscosity @ -20°C Viscosity @ 0°C Viscosity @ 20°C Viscosity @ 40°C Viscosity @ 60°C Pour Point Flash Point Water Content Thermal Conductivity Thermal Expansion coefficient (Volume) Bulk Modulus @20°C Specific Heat Capacity @ 25°C Vickers V104 Vane pump 200hrs @ 1500psi Vickers V104 Vane pump 200hrs @ 2000psi 4 Ball test, 40Kg, 60 mins Compression Ignition (Def Stan 91-110 Annex D ) Corrosion - Liquid-phase ASTM D665B Corrosion- Vapour-Phase EN10025, 60°C, 16hrs Accelerated Ageing, pH after 60 days @ 80°C Nitrogen Air

Unit H’Safe NL1 Cefas D 98.5% NEMs yellow/green Visual Clear, Pink 1.080 9.60 cSt 800 cSt 270 cSt 85 cSt 40 cSt 40 °C -40 °C None % 35 J/hr/m/°C 1.60 /°C 7.0 x 104 /atm 3.3 x 104 kJ/Kg/°C 3.4 mg loss 5 mg loss 6 mm scar 0.52 Ratio 40:1 No rust No rust 9.6 8.6

COMPATIBILITY WITH SYSTEM COMPONENTS

Earlier generations of piston rod design in riser tensioner systems exploited the appli-cation of very “hard” thermally sprayed coatings which can have some surface porosity and encourage the hydraulic fluid to be retained in the coating surface profile. This promotes hydrodynamic lubrication of seals and guide bands during short/slow rod movements in certain ocean conditions (deepwater, long wavelength and high ambi-ent temperature). Later generations of DAT/N-Line piston rods are made from carbon steel coated with either a solid super duplex stainless steel (UNS S32750) or an overlay welded cobalt based alloy (typical UNS R31233). These have very good corrosion resistance proper-ties in seawater and marine environments but have reduced surface hardness. The latter can lead to polishing, of the rod surface, particularly around the mid-stroke (main working) area. Some work-hardening may be experienced and some wear marks are often observed if the system is not cleaned regularly. Short piston rod movements combined with mid-section polished surfaces indicate that surface retention of hydraulic fluid has been reduced. This leads to boundary lu-brication rather than hydrodynamic lubrication. Boundary lubrication is less likely to promote sufficient exchange or flow of hydraulic fluid in “gaps” between seals and guide bands inside tensioner cylinders. At lower velocities, a thinner lubricating fluid film is generated that may lead to higher friction. This friction creates heat which rais-es the temperature in the system. Degradation of hydraulic fluid (evidenced by accelerated reduction in pH) has been ob-served in some DAT/N-Line systems. Such degradation includes the formation of sticky, high viscosity, black residues that contain metal fines. Metal fines have been shown to react with organic acidic additives in the fluid— under certain conditions, this can re-sult in the observed black residues. These residues are of concern as they may deposit around sealing elements. It is also of concern that deposits might reach the interiors of antirecoil valves and cause the system to fail. In addition to the above, the cylinder bore surface is often uncoated, untreated low-alloy carbon steel that has reduced corrosion and corrosive wear resistance under low-er pH conditions. See overleaf for technical data on Houghto-Safe NL1.

When considering fire resistant hydraulic fluids, either in the design or installation stage it is essen-tial to have in mind their degree of compatibility with materials normally encountered in hydraulic systems. The following table describes in general terms the compatibility of Houghto-Safe NL1 with a variety of materials and is intended as a useful guide. It is advisable, however, finally to check compatibility at least with the material supplier. Houghton has specific testing in progress at the mo-ment to confirm in more detail. C = Compatible NC = Not Compatible LC = Limited Compatibility Metals Ferrous C Epoxy C Copper and Brass C Phenolic C Bronze LC < 20% Lead. P.V.C. C Cadmium and Zinc NC Nylon C Lead NC Polypropylene C Aluminum LC - Anodized P.T.F.E. C Magnesium NC Rubbers (Elastomers Seal Materials) Tin and Nickel C NBR C Paints and Finishes Butyl C Common Industrial Oil Resistant NC High Mol Wt Polyethylene C Epoxy and Phenolic C Ethylene Propylene C Vitreous Enamel C Polyurethane NC . Plastics Silicone C Acrylic (includes Perspex) C Fluorocarbon (eg Viton) NC Styrene C – unless specific testing confirms otherwise.

CLEANLINESS LEVEL

Houghto-Safe NL1 is filtered during production to provide NAS1638 Class 6 in the container.

COMPRESSION IGNITION

Sudden high compressions in compensator systems could raise the temp-erature sufficiently to consti-tute a fire or explosive risk. This establishes the need for a water based fluid to eliminate the possibility of auto-ignition and/or compression ignition. The DEF Stan 91-110 Annex D compression ignition test is a modified version of a CFR cetane rating engine which has been designed for testing fire-resistant aqueous hydraulic fluid, for shipboard hydrau-lic systems . Compression rate is reduced from a starting position of 50:1, in steps of 1 CR increment and evidence of ignition is based on pressure rise (> 2 bar)

Filter Media

Cellulose Phenolic Resin Treated C Metallic C Earth Type NC

CORROSION RESISTANCE

Houghto-Safe NL1 is non-corrosive to ferrous and non-ferrous metals and readily passes Test Method IPA 135B / ASTM D665B. The Vapor Phase inhibitor also provides protection to metal surfaces above the fluid level.

WARRANTY

The information given here is considered to be correct and is offered for your consideration, investiga-tion and verification. No warranties are expressed or implied, since the use of our products is beyond our control. Statements concerning the use of Houghton products are not to be construed as recom-mending the infringement of any patent.

Mento Oilfield Supply Catalogue

1. Triplex 2. Jet LubePump / Hougthon Parts

Triplex Pump Parts • • • • • • •

HIGH QUALITY FLUID-END COMPONENTS THE ORIGINAL “L” SHAPED FLUID-END HP QUICK-CHANGE VALVE COVER BONDED VALVE AND FULL OPEN SEAT BONDED PISTONS LINERS HIGH QUALITY CONSUMABLES

2. EDITION

Mento Oilfield Supply Catalogue

2. Triplex Pump Parts High Quality Fluid-End Components Since 1947, Southwest Oilfield Products, “SWOP” has been an independent OEM manufacturer and supplier of quality fluid-end replacement parts. Below is an illustration of a typical Fluid-End component offering from SWOP. 6

Southwest Oilfield Products, Inc. has been a pillar in the Oilfield Industry since 1947. From our Houston based manufacturing facility, we strive to maintain our legacy by offering the highest quality parts & service the industry deserves.

7 14 12

13 15 11 13

10 13

1 2 3 4 5

Liners Wear Plates and Module Seals Pistons Piston Rods Pony Rods

6 7 8 9 10

Valve Cover Components Valve Cover Plugs Liner Retainers Suction Manifolds Suction Modules

11 12 13 14 15

Discharge Modules High Pressure Discharge Manifolds Studs and Nuts Gaskets and Seals Valve Assembly

The Original “L” Shaped Fluid-End Often Imitated But Never Duplicated, Southwest Oilfield Product’s 2-Piece “L”- Shaped Fluid-Ends Have Become The Recognized Standard.

The “L”-shaped two piece fluid-end was adopted into the market over 35 years ago because it was an obvious improvement over OEM style (valve-over-valve) modules. Since the suction module is separate from the discharge module, it is possible to replace the suction module when it wears out instead of replacing the entire fluid-end.

SWOP’s “L” Shaped Fluid-End Is Manufactured From Heat-Treated 4130 Forgings And Equipped With Our Quick-Change Valve Cover System, Our “L”-Shaped Modules Offers Unmatched Performance. Southwest’s second-to-none manufacturing is backed by the best warranty on the market.

• • • • •

OEM (Valve-Over-Valve) Style Fluid-End More expensive to maintain When wear occurs, entire fluid-end must be replaced Difficult to change valves Stress point analysis reveals design is susceptible to cracking Must remove lower valve guide to change valve

Valve-Over-Valve Fluid-End

• • • • •

Advantages of L-Shaped Fluid-End More metal to support internal pressures Designed to run with liner wear plates No lower valve guide needed Only module that offers a 4 year warranty against cracking Comes with HP Quick-Change Valve Cover assembly

Southwest L-Shaped Fluid-End

Mento Oilfield Supply Catalogue

2. Triplex Pump Parts HP Quick-Change Valve Cover • Southwest Oilfield’s HP Quick-Change Valve Covers eliminate the need to replace or repair the expensive parts of your valve cover assembly. • Only Southwest Oilfield’s HP Quick-Change Valve Covers provide true steel-to-steel tightening and has the best valve cover seal on the market. • Most pumps require no modification to convert to our Quick-Change product. Simply remove all component parts of the old valve cover including studs. Southwest’s assembly kit includes everything needed for the changeout.

Southwest Oilfield Products Valve Cover Arrangement With Full Steel To Steel Retainment

Bonded Valve and Full Open Seat Southwest Oilfield Products’ full open valve with bonded insert has replaced the slip-on insert valves. This design is permanently bonded to the valve body; it reduces the tendency for fluids to penetrate between the polyurethane insert and the valve body, thus preventing premature failure. The full open design of the valve seat is far superior to webbed style seats for many reasons: • Increased throughput

• Reduced wear and tear on fluid-end seat deck

• Even loaded surface compared to a webbed valve seat

• Reduced fluid turbulence

• Available in API and non API sizes

Webbed – Uneven seat loading can result in premature module failure. Notice red areas are under extreme stress (66,000psi).

Full open – Not only is the full open seat more evenly loaded but the full open design results in less stress transferred to the module overall. Notice even the highest stress areas are much lower (11,000) than the webbed seat.

Mento Oilfield Supply Catalogue

2. Triplex Pump Parts Bonded Pistons The Fail-Safe Piston For Triplex Pumps In 1947, our first bonded piston was introduced into the market. Since then, the Fail-Safe Piston has remained virtually unchanged. The One-Piece Bonded Piston Design eliminates leakage points and is resistant to Abrasive Fluids. This Fail-Safe Piston seals off to greater diameters as the liner wears.

The Dual-Duro Piston For Triplex Pumps This Premium Piston Has Been In Service Since 1985, Providing Unmatched Performance Under Extreme Drilling Conditions. It performs well with exotic drilling fluids and high temperatures. Made of Dual-Durometer Polyurethane, this piston is designed to resist extrusion thus extending the life of the piston. Full traceability is provided with all products sold, including pistons. Traceability markings include: Operators ID, Packers ID, Date of Urethane Pour, Part Number of Piston, Work order number, Made in USA brand, and SW logo.

Liners Zirconia Liners Expendables Cost $50,000 $40,000 $30,000 $20,000 $10,000

Our advanced Zirconia Liners are significantly harder than hardened steel liners, and tougher than any other ceramic available. The ceramic used in these liners is extremely resistant to corrosion and heat. Traditional liner hourly cost is approximately $1.05 per hour, while Zirconia Liners are approximately $.23 per hour.

Liner Cost

Piston Cost

Overall Cost

Triplex Grayloy® Liners For use in today’s higher pressure and faster stroking triplex pumps, Grayloy liners are made of the highest quality high chrome premium alloy steel. They are manufactured to provide maximum runs at minimal cost.

Southwest Quick-Change Hydraulic Liner Retainer Increased safety and faster change-outs is the hallmark of Southwest Oilfield’s QuickChange Hydraulic Liner Retention System. Our patented design eliminates the need for hammers and wrenches without compromising sealing or alignment of the liner.

Mento Oilfield Supply Catalogue

2. Triplex Pump Parts High Quality Consumables Southwest Washpipe And Packing Our premium washpipes are manufactured for all swivels to precise tolerance with the same superior wear-resistant surface as the Grayloy piston rod. High-quality fabric and rubber molded wash pipe packing is also available.

Packing And Gaskets For Triplex And Duplex Pumps Southwest Oilfield Products offers a wide range of gaskets and packing materials for use in drilling pumps. Gaskets are made of various elastomers and rubbers depending on the application. New high temperature elastomers are now available.

Hydraulic Seat Pullers And Kits • Pulls seat safely, quickly, and efficiently with no chance of damage to seat deck • A complete line of puller heads for any brand seat • Split-jaw heads for full-open seats; “j”hook heads for stem guided seats • Available in API and Non-API

Mento Oilfield Supply Catalogue

2. Triplex Pump Parts

Mento Oilfield Supply Catalogue

1. Centrifugal 3. Jet Lube / Hougthon Pump & Parts/General Pumps

Centrifugal Pumps & Parts General Pumps • • • • • • •

CENTRIFUGAL PUMPS CENTRIFUGAL PUMPS PARTS DIMENSIONAL ILLUSTRATIONS DIMENSIONS AND WEIGHT MATERIAL NUMBER SCHEME PUMP CROSSOVER GENERAL PUMPS

2. EDITION

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps 3 Sentrifugal Pumps & Parts

Centrifugal Pumps

The MUD HOG™ and all its features were designed with the customer in mind. Replacement parts are interchangeable with the Halco© 2500 Supreme centrifugal pumps, Mission® Magnum 1, and Mission® Magnum XL. General Information General Applications • Fresh water • Sea water • Drilling mud Standard trim includes • Frame - Cast Iron • Shaft* - 4140 Low alloy steel • Shaft Sleeve* - 416 Stainless steel • Casing* - Hard iron/Cast iron • Wear Pad* - Hard iron • Labyrinth Seals/Isolators - Bronze • Mechanical Seal* - Heavy duty tungsten carbide with Viton® bellows • Impeller* - Hard iron • Casing Nuts - Stainless steel Features • Wear Pads are replaceable on 4 x 3 x 13 in. through 8 x 6 x 14 in. • Impellers on 3 x 2 x 13 in. and 4 x 3 x 13 in. pumps are full open • Impellers on 5 x 4 x 14 in. through 8 x 6 x 14 in. pumps are semi-open • Stainless steel Casing and Wear Pad Nuts allow easy access

• Inboard Bearings are of the highest quality double row angular contact Ball Bearings • Outboard Bearings are of the highest quality single row angular contact Ball Bearings • Labyrinth Seals reduce Bearing contamination and shaft wear • Mechanical Seals are a combination of tungsten carbide and Viton® bellows extend Seal life Sizes • 3 x 2 x 13 in. • 4 x 3 x 13 in. • 5 x 4 x 14 in. • 6 x 5 x 11 in. • 6 x 5 x 14 in. • 8 x 6 x 11 in. • 8 x 6 x 14 in. Material Traceability** • Material traceability reports available for fluid end components • ABS Approval (pending) Interchangeability • The MUD HOG™ Centrifugal Pump is interchangeable with the Halco® 2500 Supreme, Mission® Magnum 1, and Mission® Magnum XL. * Please consult factory for alternate materials. ** Certification provided upon request at an additional charge.

Mento Oilfield Supply Catalogue

3 Sentrifugal Pumps3.&Centrifugal PartsPump & Parts/General Pumps

Centrifugal Pump Parts

Centrifugal Pump Shaft Baker SPD assures the performance of the pump shaft by specifying the highest quality, fatigue-resistant alloy steel, which is machined. The shaft is designed to transmit the required horsepower for maximum output in the most severe applications.

Centrifugal Pump Shaft Sleeve A protective sleeve is designed to cover and protect the shaft form abrasive fluids. The sleeve is made from ceramic-coated 416 stainless steel or uncoated steel when used with mechanical seal.

Centrifugal Pump Impeller A semi-open design has been selected for sized from 5 x 4 x 14 in. through 8 x 6 x 14 in. The semi-open vane design provides efficient fluid intake and discharge through the power side of the impeller. The impeller is designed with back vanes, which reduces wear on the stuffing box face. The back vanes also reduce wear by limiting the inflow of solids to the stuffing box, which increases mechanical seal life.

Centrifugal Pump Wear Pad Replaceable wear pads are available to extend the life of casings. Baker SPD casings are designed with wear pads in sizes 4 x 3 x 13 in. through 8 x 6 x 14 in. Wear pad repair kits include studs and stainless steel nuts to assure ease of replacement.

Centrifugal Pump Mechanical Seal Baker SPD has a premier, heavyduty tungsten carbide seal. The seal face is highly polished tungsten carbide on tungsten carbide. Viton速 bellows allows expansion without binding and provides high temperature resistance. Flexible bellows design allows spring force to easily move seal faces together for extended seal life.

Centrifugal Pump Bearings Baker SPD specifies bearings of the highest quality from premier bearing manufacturers. The bearings are interchangeable with other popular 2.5 in. pump models. The outboard bearing is a duplex configuration with angular ball contact to satisfy the maximum power input requirement. The inboard bearing is a double row angle contact configuration for maximum run life.

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps 3 Sentrifugal Pumps & Parts

Centrifugal Pump Parts Centrifugal Pump Labyrinth Seals

Jack Bolts

The Labyrinth Seal or Isolator is a two-piece device used to Isolator is a two-piece device used to isilate the Bearings from harmfull contaminants, while keeping the Bearings lubricated. Labyrinth Seals use two different components; a rotor and a stator. The rotor is attached to the shaft through a ring and rotates with it, thus decreasing shaft wear. The statior portion of the Labyrinth Seal is stationary and press fit into the Housing. These two pieces lock with an O-ring to form a single working unit. This configuration, while turning, is free from mechanical contact. The Labyrinth Seals are abrasion and corrosion resistant for longer life.

The MUD HOG™ uses two [2] 3/4 in. stainless steel Jack Bolts to assist in the replacement of the Casing. There is a build up of material between the Casing and stuffing Box during normal operation. This build up can make it difficult to remove the Casing. Conventional pry bars, crow bars and other tools do not distribute an even force and may cause bending. The Jack Bolts allow an even distribution of pressure to the Casing for ease in removal.

Centrifugal Pump Frame The MUD HOG’s frame is made from cast iron for strength and durabillity. The frame has been deesigned to withstand high piping loads that can result in shorter Bearing life. The MUD HOG™ frame is built to handle various applications an working conditions. Stuffing Box bolts Two Stuffing Box bolts are set up 180 degrees apart to hold the stuffing Box in place. The positioning of the bolts allows the Casing to be replaced without interfering with the Stuffing Box or hampering removal of the Casing.

Stainlesss Steel Casing Nuts Casing replacement has been made easier by utilizing stainless steel Casing Nuts. stainless steel is more corrosion resistant than conventional steel. the use of stainless steel material minimizes the need for frequent replacement of the Casing Nuts which are otherwise worn out by rust and/or removal tools

Mento Oilfield Supply Catalogue

3 Sentrifugal Pumps3.&Centrifugal PartsPump & Parts/General Pumps

Dimensional Illustrations

Note: All dimensions are in inches. Skid dimensions are for reference only. Do not use for construction. Dimensions subject to change.

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps 3 Sentrifugal Pumps & Parts

Dimensions and weights Dimesional Data for 2.5 IN. Centrifugal Pump Pump Size

3X2X13 4X3X13 5X4X14 6X5X11 6X5X14 8X6X11 8X6X14

9 9 9 9 9 9 9

19-5/8 19-5/8 19-5/8 19-5/8 19-5/8 19-5/8 19-5/8

3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2

15-7/16 15-7/16 15-7/16 15-7/16 15-7/16 15-7/16 15-7/16

17-7/8 8-3/4 17-7/8 9-3/8 19 10-3/4 17-7/8 12-1/16 21 12-1/16 20 13-1/4 23-9/16 13-1/4

2-5/16 2-5/16 2-5/16 2-5/16 2-5/16 2-5/16 2-5/16

10-1/4 10-1/4 11 11 11 14 14

3-3/4 4-1/4 5 5-3/4 5-3/4 6-1/4 6-1/4

7 6-3/4 6-1/8 6 6 8-3/8 8-3/8

29-7/4 9 29-3/8 9 30 9-11/16 30-5/8 9 30-5/8 10-3/8 31-1/4 10 31-1/4 12

See illustration

Flange Dimensions Flange Size

Thickness

No of Holes

Size of Holes

2 3 4 5 6 8 10

6 7-1/2 9 10 11 13-1/2 16

3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2

4-3/4 6 7-1/2 8-1/2 9-1/2 11-3/4 14-1/4

4 4 8 8 8 8 12

3/4 3/4 3/4 7/8 7/8 7/8 1

ASME/ANSI Class 150 Flat Face Flangers. See illustration

Assemblies and weights for 2.5 IN. Centrifugal Pump Pump Size

Packed Pump

Mechanical Seal

Weight (lb)

3X2X13 4X3X13 5X4X14 6X5X11 6X5X14 8X6X11 8X6X14

999881AA4 999881AB4 999881AC0 999881ADC 999881AE0 999881AFC 999881AG0

999881BA4 999881BB4 999881BC0 999881BDC 999881BE0 999881BFC 999881BG0

490 515 540 590 675 725 750

Dimesional Data for 2.5 IN. Centrifugal Pump Motor Frames

Base

C max

182T-215T 254T-286T 324T-326T 364T-365T 404T-405T 444T-445T

FB-5 FB-2 FB-2 FB-3 FB-3 FB-4

19-13/32 28-7/64 31-1/8 33-7/8 37-63/64 44-1/4

13-7/16 20-11/32 20-11/32 26-3/32 26-3/32 31-7/32

47-3/4 56-7/32 56-7/32 64-11/32 64-11/32 69-31/32

13 20 20 22 22 24

*Unless spacer coupling

3-23/32 12-1/2 3-59/64 19 3-59/64 19 5-59/64 25 5-59/64 25 5-59/64 27-3/8

SP*

22 21 21 25 25 30

13 15 15 17 17 17-1/2

4-7/8 4-7/8 4-7/8 4-7/8 4-7/8 4-7/8

1 1 1 1 1 1

Mento Oilfield Supply Catalogue

3 Sentrifugal Pumps3.&Centrifugal PartsPump & Parts/General Pumps

Material number scheme Base Material Number

Frame Configuration 6th Digit 1 2 3 4

1st to 5th Digits 99988

6th Digit (Standard/Short) Size (in.) Standard 2.5 Standard 2.5 Short 2.5 Short 2.5

Lubrication Grease Oil Grease Oil

Stuffing Box Seal 7th Digit A B C D E F G A

5 Ring Packing with Lantern Ring Mecanical Seal (Tungsten Carbide) with three (3) Ring Packing, SS Shaft Mecanical Seal (Tungsten Carbide) with three (3) Ring Packing, Ceramic Coated Shaft Sleeve Mecanical Seal (Silicon Carbide) with three (3) Ring Packing, SS Shaft Sleeve Mecanical Seal (Silicon Carbide) with three (3) Ring Packing, Ceramic Coated Shaft Sleeve Injectable Packing for Water Based Mud (including two (2) Packing Rings), 17-4 PH Hardened Shaft Sleeve Injectable Packing for Hydrocarbon Based Mud (including two (2) Packing Rings), 17-4 PH Hardened Shaft Sleeve 5 Ring King Packing with Lantern Ring, Ceramic Coated Shaft Sleeve

â&#x20AC;&#x153;9â&#x20AC;? in the 7th character indicates a special assembly

Fluid End Size Options and Materials 8th Digit Casing Size 3x2x13 4x3x13 5x4x14 6x5x11 6x5x14 8x6x11 8x6x14

Hard Iron A B C D E F G

Extra Hard Iron J K L M N P R

Extra Hard Iron T U V W X Y Z

Bronze 2 3 4

Note: Fitted components would consist of Impeller and Stuffing Box

Impeller Sizes For 2.5 in. 9th Digit 0 1 2 3 4 5 6

14 in. 13-3/4 13-1/2 13-1/4 13 in. 12-3/4 12-1/2

in. in. in. in. in.

8 - 12 in. 9 - 11-3/4 in. A - 11-1/2 in. B - 11-1/4 in. C - 11 in. D - 10-3/4 in. E - 10-1/2 in.

F - 10-1/4 in. G - 10 in. H - 9-3/4 in. J - 9-1/2 in. K - 9-1/4 in. L - 9 in. M - 8-3/4 in.

N - 8-1/2 in. P - 8-1/4 in. R - 8- in. S - 7-3/4 in. T - 7-1/2 in. U - 7-1/4 in. V - 7 in.

W - 6-3/4 in. X - 6-1/2 in. Y - 6-1/4 in. Z - 6 in.

Bronze 6 7 -

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps 3 Sentrifugal Pumps & Parts

Material number scheme Impeller Material number scheme 2.5 IN. centrifugal Pump, Impeller Size (in.)

Impeller Material No.

3X2X6.00-13.00 4X3X6.00-13.00 5X4X6.00-14.00 6X5X6.00-11.00 6X5X9.00-14.00 8X6X6.00-11.00 8X6X6.00-14.00

05213571(_) 05213581(_) 05213591(_) 05213601(_) 05213621(_) 05213601(_) 05213631(_)

Note: 9th character of material number indicates size per chart below

Impeller Size Chart for 2.5 IN. Size Code

Diameter (in.)

Size Code

Diameter (in.)

0 1 2 3 4 5 6 7 8 9 A B C D E F G

14.00 13.75 13.50 13.25 13.00 12.75 12.50 12.25 12.00 11.75 11.50 11.25 11.00 10.75 10.50 10.25 10.00

H J K L M N P R S T U V W X Y Z

9.75 9.50 9.25 9.00 8.75 8.50 8.25 8.00 7.75 7.50 7.25 7.00 6.75 6.50 6.25 6.00

Mento Oilfield Supply Catalogue

3 Sentrifugal Pumps3.&Centrifugal PartsPump & Parts/General Pumps

Material number scheme Repair Kit material number scheme Casing Kit Size (in.)

Repair Kit. Material No.

Repair Kit. Asseembly Includes

3x2x13

052134000

4x3x13 5x4x14 6x5x11 6x5x14 8x6x11 8X6X14

052134100 052134200 052134300 052134400 052134500 052134600

Casing (Hard Iron) Casing Gasket Casing Stud Casing Nut Casing Drain Plug (NPT) Casing Wear Pad Wear Pad Gasket Wear Pad Stud Wear Pad Nut Casing Gasket Casing Stud Casing Nut Casing Drain Plug (NPT)

*All Casing Kit are hydrotested to 375 psig at no extra charge before leaving the factory

Casing Wear Pad Kit Size (in.)

Repair Kit. Material No.

Repair Kit Includes

4x3x13 5x4x14 6x5x11 6x5x14 8x6x11 8x6x14

052134000 052134100 052134200 052134300 052134400 052134500

Wear Pad Wear Pad Gasket Wear Pad Stud Wear Pad Nut Casing Gasket

Shaft Sleeve Kit Description

Material No.

Repair Kit Includes

Stainless Steel Shaft Sleeve Repair Kit

052137000

Ceramic Coated Shaft Sleeve Repair Kit

052144200

17-4 PH Shaft Sleeve Repair Kit

052144201

O-ring - Shaft (Size 225) O-ring - Impeller (Size 032) O-ring - Shaft (Size 225) O-ring - Impeller (Size 032) O-ring - Shaft (Size 225) O-ring - Impeller (Size 032)

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps 3 Sentrifugal Pumps & Parts

Material number scheme Repair Kit number scheme (continued) Description

Material No.

Repair Kit Includes

Mechanical Seal Repair Kit

WVBUF9000

Mechanical Seal Components And Roll Pin

Fluid End Gasket Kit

052145400

Casing Gasket Impeller Seal (O-ring 032) Shaft Sleeve Seal (O-ring 225)

Power End Gasket Kit

052145500

Inboard Bearing Cover Gasket Outboard Bearing Housing Seal (O-ring 254) Outboard Bearing Cover Seal (O-ring 248)

Labyrinth Seal Replacement Kit

052145600

Inboard Labyrinth Seal Outboard Labyrinth Seal

Bearing Look Nut Replacement Kit

052145700

Outboard Bearing Lock Washer Outboard Bearing Lock Nut

Injectable Packing Kit for Oil Based Mud

WVUT067807400

Injectable Sealant Containment Rings and Fitting Assembly

Injectable Packing Kit for Water Based Mud

WVUT066807400

Injectable Sealant Containment Rings and Fitting Assembly

052149000

Inboard and Outboard Exclusion seals

Oil Seal Kit

Mento Oilfield Supply Catalogue

3 Sentrifugal Pumps3.&Centrifugal PartsPump & Parts/General Pumps Description

Qty Req

Frame 1 Olastic Plug 1 Breather 1 Oil Plug 2 Outboard Bearing Labyrinth Seal 1 Outboard Bearing Cover 1 Outboard/Inboard Bearing Grease Fitting 2 Outboard Bearing Cover Bolt 2 Outboard Bearing Cover Seal 1 Outboard Bearing 2 Bearing Lock Washer 1 Bearing Lock Nut 1 Outboard Bearing Housing 1 Outboard Bearing Housing Bolt 4 Outboard Bearing Housing Nut 2 Outboard Bearing Housing Seal 1 Shaft 1 Coupling End Key 1 Inboard Bearing 1 Inboard Bearing Cover 1 Inboard Bearing Cover Gasket 1 Inboard Bearing Cover Bolt 2 Inboard Bearing Cover Labyrinth Seal 1 Gland Set 1 Gland Assembly Bolt 2 Packing, 3 Rings For Mechanical Seal 1 Shaft Sleeve Repair Kit 1 Ceramic Coated Shaft Sleeve Repair Kit 1 Impeller Seal 1 Stuffing Box Cover For Mechanical Seal 1 Stuffing Box Cover For Mechanical Seal Al. Br. 1 Stuffing Box Cover For Packed 1 Stuffing Box Cover Bolt 2 Mechanical Seal Repair Kit 1 Shaft Sleeve Seal 1 Impeller 1 Casing 1 Wear Pad 1 Wear Pad Gasket 1 Wear Pad Stud 4 Wear Pad Nut 4 Casing Gasket 1 Casing Drain Plug 1 Casing Stud 12 Casing Stud Nut 12 Jack Bolts 2 Fluid End Gasket Kit 1 Power End Gasket Kit 1 Labyrinth Seal Replacement Kit 1 Lock Nut Replaicement Kit 1 Grease Seal Kit 1 * Contact Mento

Baker SPD

Mission速

Halco速

052136610 WVCCF118 WWW00C002 WWWX00012 WVIN00262 052136910 WWW00C003 WWG31D107 WWWB248P41 WWESK7311 WV00W1100 WV00N1100 052136810 WWG31H1H7 WWJ31H800 WWB254P41 052133900 WWW00A004 WWENT5313 052136710 052137400 WWG31H1H7 WVINM0026 052136500 052137280 052141500 052137080 052144280 WWB136P41 052136410 052136430 052144910 WWG31H187 WVBUF9085 WWB225V40 * * * * WWHS1H2SA WWJ51H800 052137100 WWWX00012 WWHS1S3HA WWJ11S800 WWG11S280 052145400 052145500 052145600 052145700 052149000

20618-12-1 8267-1 8505-1 * 20617 3861-139 7496-26 20616-1 6124-4 6123-4 20624-01-01 3861-138 3932-62 7496-253 20612-02-33 4372-5-21 20615-1 20626 20625 3861-1 * 20622A B3701A * 20943-04A 20613-21G7A 19110-72 22223-01-30A 22223-03-13A 20614-01-30 3861-117 22451-1 7496-033 * * * * * * 10399-46-1 8505-1 3862-76 3932-61 2538 10399-46-1A 20625A N/A 6123-4A 20619A

H17444 H8267-1 H8505-1 * H20617-01-01 H3861-139 H7496-26 H20616-1 H6124-4 H6123-4 H20624-01-01 H3861-138 H3932-62 H7496-253 H20612-02-33 H4372-5-21 H20615-1 H17950 H20625 H3861-1 * H20622A H3701A H2537-24A H20613-21A H20613-21G7A H19110-72 H22223-01-30A H22223-01-13A H20614-01-30A H3861-117 H22451-1A H7496-236 * * * * * * H10399-46-1 H8505-1 H2507-3 H3932-61 H2538 H10399-46-1A H20625A N/A H6123-4A H20619A

Mento Oilfield Supply Catalogue

3. Centrifugal Pump & Parts/General Pumps General pumps Wilden Diaphragm Pumps & parts

Sandpiper Pumps & parts

Well servicing pumps

Parts for Gardner Denver, OPI, SERVA, OFM, SPM pumps etc.

Mento Oilfield Supply Catalogue

1. P-Quip 4. Jet Lube / Hougthon

P-Quip • • • • • • •

KWIK-ROD KWIK-COVER KWIK-CLAMP KWIK-CLEAN KWIK-CARTRIDGE WASHPIPE SYSTEM PISTON SELF SUPPORTED MUD BUSKET

2. EDITION

Mento Oilfield Supply Catalogue

1. API 5. Jet Lube Equipment / Hougthon

API Equipment • • • • • • • • •

EFC CHOKE CONTROL SYSTEMS, INCREASED REDUNDACY EFC BOP CONTROLS UPGRADES, API STANDARDS EFC WELL CONTROL MONITORING EFC ACOUSTIC BOP CONTROL SYSTEM BACK-UPS EFC BOP EVENT LOGGER, BLACK BOX OPTION EFC 15K BOP TEST UNITS EFC BOP TRANSPORTER MECHANICAL HANDLING Upgrades ANSON API EQUIPMENT PHOENIX BEATTIE DRILLING HOSES

www.efcgroup.net

2. EDITION

Mento Oilfield Supply Catalogue

1. Protectors 6. Jet Lube / /Hougthon Lifting Bails

Protectors Lifting Bails • • •

TOTAL TUBULARPROTECTION PROTECTORS LIFTING BAILS

2. EDITION

Mento Oilfield Supply Catalogue

6 Protectors

6. Protectors / Lifting Bails

Total Tubular Protection

THREAD PROTECTORS

Mento Oilfield Supply Catalogue

6 Protectors

6. Protectors / Lifting Bails

Protectors

A NEW GENERATION OF PREMIUM THREAD PROTECTORS FOR DRILL PIPE AND DRILL COLLAR CONNECTIONS

• • • • •

MAXIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM

PROTECTION FOR TOOL JOINT THREADS PROTECTION FOR TOOL JOINT SEALS PROTECTION FROM MOISTURE INTRUSION & CORROSION TEMPERATURE RANGE (-500F TO +1500F), (-460C TO +660C) (API 5CT) IMPACT RESISTANCE FROM HIGH DENSITY POLYETHYLENE

 Mento Oilfield Supply Catalogue  6. Protectors / Lifting Bails    CAST STEEL WITH LIFTING BAILS 

BOX





Manufactured from steel castings meeting A.S.T.M.S. No. A27 Grade 60-30 and B.S. 3100 Grade A1. Fully heat treated to give 60,000 P.S.I. Tensile and 30,000 P.S.I. Yield. Furnished with  heavy-duty bails suitable for picking up and laying down Drill Collars, Drill Pipes, downhole tooling, etc. Threads and shoul ders are precision machined to A.P.I. Standards. Safe Working Load Certificates are included. 

  

When ordering, please specify: a. Connection size & type. b. Pin or Box Protector. NOTE : Left hand bails can be supplied to order.

Mento Oilfield Supply Catalogue

1. Drill 7. Jet Lube Pipe/Float Hougthon Valves/Kelly Valves

Drill Pipe Float Valves Kelly Valves • • • • • • • • •

INTRODUCTION MODEL G AND GA DPFV REPAIR KITS FOR ALL STYLES OF MODEL F AND G DPFV VALVE PULLERS FOR ALL STYLES OF MODEL G DPFV SPECIFICATION GUIDE BIT SUB INFORMATION ORDERING INFORMATION // STANDARD APPLICATION ORDERING INFORMATION // HYDROGEN SULFI DE (H2S) APPLICATION ORDERING INFORMATION // HI-TEMP APPLICATION

2. EDITION

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves Introduction Introduction FORUM SPD is the original manufacturer of Baker Drill Pipe Float Valves. Committed to continuous improvement and production of quality products for optimum performance and reliability, Forum Drill Pipe Float Valves have become an industry standard with their superior engineering, quality, construction and dependability in service. FORUM SPD manufactures a complete line of Float Valves, Repair Kits, and Puller Assemblies to accommodate a wide range of drilling situations and operating conditions, including H2S and Steam Service. These Drill Pipe Float Valves provide added blowout protection at the bottom of the drillstring, prevent flowback when joints are added, and keep cuttings out of the drillpipe to prevent bit plugging while making connections. Note: It is recommended that if multiple Drill Pipe Float Valves are run in the same string, they be separated. However the Model GS may be stacked.

QUALITY CONSTRUCTION FORUM / SPD Drill Pipe Float Valves have been designed, manufactured, tested, and certified in accordance with accepted engineering, manufacturing, and quality assurance standards including, but not limited to, the following documents or publications. • American Iron and Steel Institute (AISI) • American National Standards Institute (ANSI) • American Society for Testing and Materials (ASTM) • American Society for Metals (ASM) • American Welding Society (AWS) • Rubber Manufacturer’s Association (RMA) • Society of Automotive Engineers (SAE)

RATED OPERATING PRESSURE Model F Drill Pipe Float Valves rated 7,500 WP. Model G & GS Drill Pipe Float Valves rated 7,500 WP.

CAGES & GS Cage construction of the various Models F and G includes ductile iron, and there is an option for low alloy steel cage in some Model F sizes. Hardness levels of these are at or below 22 Rockwell C to resist hydrogen sulfide stress cracking when used for H2S applications. The Model GS cage is made from low alloy steel. Stainless Steel available upon request.

SPRINGS Models F and G utilize high alloy springs for all applications.

SEAL AND SHOCK ABSORBER ELASTOMER Application

Material

Temperature

Standard

Nitrile (BUNA)

100˚C [212˚F]

Hi-Temp

Viton

204˚C [400˚F]

H2S

HSN/HNBR

149˚C [300˚F]

Geothermal

L’GARDE EPDM

232˚C [450˚F]

Steam

L’GARDE EPDM

232˚C [450˚F]

Hi-Temp Over 450˚F

KALREZ (FFKM)*

327˚C [640˚F]

H2S/Steam/Geothermal

// 01

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves Model G and GA DPFV

Model G and GA DPFV

Flappers for Model G/GA are made of normalized, carbonized, quenched, and tempered low alloy steel to resist wear and erosion. The flapper valve opens fully during circulation providing an unrestricted bore through the valve thereby effectively prolonging the life of the valve and drill collar as there is no diversion of fluid against the drill collar ID.

2 3

2 3 8

Model G Full Open Valve Flapper Type Product Family No. 48015

Model GA Differential Pressure Monitoring Valve Product Family No. 48016

Model G // Full Open Valve Flapper Type

Model GA // Differential Pressure Monitoring Valve

Product Family No. 48015

Product Family No. 48016

The Model G â&#x20AC;&#x153;Flapper Typeâ&#x20AC;? Full Open Valve incorporates a specially designed flapper which opens quickly and fully to provide a completely unrestricted bore through the valve. The Model G is especially good for use with highly abrasive fluids. When circulation stops, the flapper closes instantly to prevent cuttings from entering the drill string and plugging the bit. The valve opens when the first joint is raised out of the hole assuring the first joints drain and are not pulled wet. The flapper-type valve complements primary blowout prevention equipment to provide complete internal pressure control.

The Model GA Differentail Pressure Monitoring Valve is identical to the Model G except for a hardened1/4 in. diameter tungsten carbide orifice bean insert in the flapper to provide automatic partial filling of the drillpipe during running in. This valve is used when monitoringthe bit head for gas pressure and/or gas pockets, allowing measurement of differential pressure when required.

DIAGRAM KEY FOR MODEL G FULL OPEN VALVE FLAPPER TYPE 1. Small Bumper

6. Seal Retainer

2. Spring

7. Flapper Valve

3. Pin

8. Seal

4. Large Bumper 5. Shock Absorber

04 //

9. Side Seal 10. Cage

DIAGRAM KEY FOR MODEL GA DIFFERENTIAL PRESSURE MONITORING VALVE 1. Small Bumper

7. Carbide Bean

2. Spring

8. Seal Retainer

3. Pin

9. Seal

4. Large Bumper

10. Side Seal

5. Flapper Valve

11. Cage

6. Shock Absorber

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves Repair Kits for all Styles of Model F and G DPFV

Repair Kits for all Styles of Model F and G DPFV Repair Kits for all Styles of Model F Drill Pipe Float Valves RUBBER KIT FOR MODEL F DRILL PIPE FLOAT VALVES

METAL KIT FOR MODEL F DRILL PIPE FLOAT VALVES

Side Seal [8]

Valve [1]

Valve Seals [2]

Valve Springs [3]

Valve Guide [1]

Valve Seal Disk [1]

Repair Kits for all Styles of Model G Drill Pipe Float Valves METAL KIT FOR MODEL G DRILL PIPE FLOAT VALVES Spring Assemblies [3]

Seal Retaining Ring [1]

RUBBER KIT FOR MODEL G DRILL PIPE FLOAT VALVES Hinge Pins [3]

Flapper Valve [1]

Shock Absorber [1]

Side Seals [8]

Seal Retaining Ring [1]

Valve Seals [2]

Valve Pullers for all Styles of Model F Drill Pipe Float Valves Product Family No. 48091

The Valve Puller consists of a finger sub that is stabbed into the bottom end of the Drill Pipe Float Valve Cage and engages the web by right-handed rotation.

Valve Puller for F Models Product Family No. 48091

Caution :

When pulling a Model FC, the release key on the Drill Pipe Float Valve must be positioned such that the finger sub does not contact the key prior to engaging the web of the cage. This will prevent damage to the key during valve removal.

// 09

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves Valve Pullers for all Valve Styles Model DPFV Pullersof for all Styles of G Model G DPFV

Product Family No. 48090 The valve puller consists of a fork that engages the cage of the Drill Pipe Float Valve. The driver is then forcefully pulled upward to quickly and easily remove the valve from the cavity in the float sub or drill collar.

Valve Puller for G Models Product Family No. 48090

BAFFLE PLATES

Product Family No. WVT791 Forum Baffle Plates are installed on top of the Drill Pipe Float Valve as a landing tool for recorders, thus preventing the recorder from entering the Drill Pipe Float valve and possibly the drill bit.

Baffle Plates

Product Family No. WVT791

BAFFLE PLATE RING AND SPIDER TYPE (MAJOR OD AND ID DIMENSIONS) Item Number WVT791701 WVT791701M WVT791702 WVT791703 WVT791704 WVT791705 WVT791706 WVT791707 WVT791711 WVT791712 WVT791713 WVT791714 WVT791721 WVT791722 WVT791723 WVT791724 WVT791725 WVT791726 WVT791740 WVT791741 WVT791742 WVT791743 WVT791744

Description Baffle Plate, Spider Type 2-7/8 API Reg. Baffle Plate, Spider Type 2-7/8 API Reg. Baffle Plate, Ring Type 3-1/2 API Reg. Baffle Plate, Ring Type 4-1/2 API Reg. Baffle Plate, Ring Type 5-1/2 API IF Baffle Plate, Ring Type 6-5/8 API Reg. Baffle Plate, Ring Type 7-5/8 API Reg. Baffle Plate, Ring Type 8-5/8 API Reg. Baffle Plate, Spider Type 3-1/2 API Full Hole Baffle Plate, Ring Type 4-1/2 API Reg. Baffle Plate, Ring Type 5-9/16 API Full Hole Baffle Plate, Ring Type 6-5/8 API Full Hole Baffle Plate, Spider Type 3-1/2 API Full Hole Baffle Plate, Spider Type F/4R, 4F, 5R Baffle Plate, Spider Type 5-9/16 FH, 6-5/8 API Reg. Baffle Plate, Spider Type 6-5/8 API Full Hole Baflle Plate, Spider Type 3.5 IF Baffle Plate, Spider Type Baffle Plate, Spider Type 2-7/8 API IF Baffle Plate, Ring Type 3.5 IF Baffle Plate, Ring Type 4.5 IF Baffle Plate, Spider Type F/NC31 2-7/8 IF Baffle Plate, Ring Type NC46, 4 IF

*Guide Ring OD is machined to fit sub through bore for 1F-2R, .94” X 1.47” OD*

10 //

DPFV 1F-2R 1F-2R 2F-3R 4R 5R 5F-6R 5F-6R 6F 3F 4F 5F-6R 6F 3F 4R, 4F, 5R 5F-6R 6F 3-1/2 IF 5R 2F-3R 3-1/2 IF 5R 2F-3R 4F

Ring or Spider OD 1.94” 1.90” 2.28” 3.22” 3.87” 4.63” 5.33” 6.22’” 2.75” 3.25” 4.63” 5.38” 2.63” 3.44” 4.68” 6.56” 3.06” 3.76” 2.34” 3.06” 4.22” 2.40” 3.88”

Inner Ring ID .94” .94” .75” 1.13” 1.25” 1.25” 1.135” 1.125” 1.00” 1.25” 1.25” 1.25” 1.00” 1.00” 1.29” 1.25” 1.00” 1.00” 1.00” 1.13” 1.25” 1.00” 1.25”

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves SPECIFICATION GUIDE SPECIFICATION GUIDE Tool Joint Types

1F-2R

2F-3R

3-1/2 IF

API Regular

2- 3/8

2-7/8

3-1/2

4-1/2

Hughes or Reed Acme Regular

2-3/8

2-7/8

3-1/2

4-1/2

Union Tool

2-3/8

2-7/8 3-1/2 2-7/8 2-3/8 2-3/8

Hughes or Reed Double Streamline API Full Hole Reed Acme Full Hole Hughes Acme Streamline

4-1/2 4 4-1/2 3-1/2

3-1/2 2-7/8

5 4

4-1/2

* 4-1/2 *

5F-6R

5-1/2 5-9/16 5-1/2 5-9/16 5-1/2 5-9/16 5-1/2 5-9/16

6-5/8 7-5/8

4-1/2

3-1/2

2-7/8

3-1/2

Hughes Xtra Hole

2-7/8

3-1/2

4-1/2

Reed Semi-Internal Flush

2-7/8

3-1/2

4-1/2

2-3/8

API Internal Flush

2-3/8

Hydril Type”IF” (Internal Flush Ext Upset) Hydril “EIU” (External Internal Upset) Hydril Type “F” 2-7/8 (External Flush) 3-1/2 Hughes Ext Flush Acme Type Hughes Ext Flush Full Hole Type

2-3/8

2-7/8

3-1/2

2-7/8

4-1/2

3-1/2

* *

•

6-5/8 6-5/8

6-5/8

4-1/2 5

5-1/2 5-9/16 5-1/2 5-9/16

4-1/2

* * *

4-1/2

3-1/2

•

5-1/2 5-9/16 5-1/2 5-9/16 5-1/2 5-9/16

4-1/2

8-5/8

5 5-1/2 5-9/16

4-1/2 6-5/8

6-5/8

4-1/2

Shaded areas indicate sizes available in Models G,GA, GCA, and GBA. Model F available in all sizes. Model FC available in all sizes, exept 1R and 1F-2R. * Float sub in these sizes has smaller ID than standard tool joint. • Interchangeable

BIT AND SHANK SIZES Bit Size (in.)

3-1/4 3-3/8

4-1/2

4-3/4

5-1/2

6-1/8

6-1/4

6-1/2

6-3/4

7-7/8

8-1/4

8-1/2

8-3/4

9-1/2

9-3/4

10-1/2

12-1/4

13-1/2

Std API Pin Shank Size (in.)

2-3/8 2-3/8

2-3/8

2-7/8

3-1/2

4-1/2

6-5/8

7-5/8

12 //

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves BIT SUB INFORMATION BIT SUB INFORMATION

Valve Size

Threads (in.)

1R 1F-2R 2F-3R 4R 5R 5F-6R 5F-6R 6F 3F 3-1/2 1F 4F 5F-6R 6F 1F-2R 2F-3R 3-1/2 1F 4F 5R 5F-6R 6F

2-3/8 2-7/8 3-1/2 4-1/2 5-1/2 6-5/8 7-5/8 8-5/8 3-1/2 4 4-1/2 5-1/2 6-5/8 2-3/8 2-7/8 3-1/2 4 4-1/2 5-1/2 6-5/8

Tool Joint Type

API Regular

API Full Hole API IF API IF Box x Pin

API IF

STD/OD (in.) 3-1/8 3-3/4 4-1/4 5-1/2 6-3/4 7-3/4 8-7/8 10 4-5/8 5-1/4 5-3/4 7 8 3-3/8 4-1/8 4-3/4 5-3/4 6-3/8 7-3/8 8-3/4

Face-to-Shoulder or Face-toFace (in) 18 20 24 28 30 24 28 30 18 20 24 28 30

Note: Box and/or pin specification required. Note: The box and/or pin connection on Drill Pipe Float Subs should not be mated with old tool joints. In addition, the sub should not be made up in the top of a drill collar unless the box on the drill collar ha been machined beforehand and new joints placed on the drill collar to mate with the upper box connection in the Drill Pipe Float Sub. Note: Other sizes are provided upon request.

// 13

480126400

016013105

016012105

2F - 3R 3F Float Valve Size 3 - 1/2 IF 1R 4R 1F - 2R 4F 2F - 3R 5R 3F 5F - 6R 3 - 1/2 IF 6F 4R 4F 5R Float Valve Size 5F - 6R 1F 6F - 2R 2F - 3R 3F 3 - 1/2Valve IF Size Float 4R 1R 4F 1F - 2R 5R 2F - 3R 5F - 6R 3F 3 - 1/2 IF 4R Float Valve Size 4F 1F 5R - 2R 2F 5F - 3R 6R 3F 6F 3 - 1/2 IF 4R 4F Valve Size Float 5R Valve Size Float 2F - 3R 5F - 6R 1R 3F 1F 2RIF 3 - -1/2 2F - 3R 4R Float Valve Size 3F 4F 3 5R- 1/2 IF 3.38 x2 4R - 6R 5F 4R 4F 6F 4F 5R 5R 5F - 6R 4.8 6F x 2.94 Float Valve Size 5F - 6R 1F - 2R 2F - 3R Float Valve Size 3F 1R 3 - 1/2 IF 14 1F 4R -//2R 2F 4F - 3R 3F 5R 3 - -1/2 5F 6RIF 4R 4F 5R Valve Size Float 5F - 6R 1F - 2R 6F 2F - 3R 3F 3 - 1/2 IF Float Valve Size 4R 2F 4F - 3R 3F 5R 3 5F- 1/2 - 6RIF 4R 4F 5R Float Valve Size 5F - 6R 3 - 1/2 IF 6F 3.38 x 2 4R 4F Float Valve Size 5R 1F 4.8 -x2R 2.94 2F 5F - 3R 6R 3F 3 - 1/2 IF 4R 4F // 16 5R 5F - 6R

480182432 070017100 HSN SEALS // MODEL016012400 F PLUNGER TYPE VALVE 480183400 016012500 070017300 Assembly Rubber Repair Kit Metal Repair Kit 480183600 016012600 070017300 480301200 071081701 071084901 480184200 016012700 070017400 071081801 071085001 480301422 480184400 016012800 070017500 480302432 071081901 071085101 480185200 016012900 070017600 480303400 071082001 071085201 480185462 016013000 070017700 480303600 071082101 071085301 480186400 016013100 070017800 480304200 071082201 071085401 480304400 071082301 071085501 BUNA SEALS // MODEL G FLAPPER TYPE VALVE 480305200 071082401 071085601 Assembly Rubber Repair Kit Metal Repair Kit 480305462 071082501 071085701 480151422 051988300 051988400 480306400 071082601 071085801 480152432 016013800 016013200 480153400 016013300 HSN SEALS // MODEL016013900 FA PLUNGER TYPE VALVE 480153600 051982000 052070200 Assembly Rubber Repair Kit Metal Repair Kit 480154200 016014000 016013400 480351200 071081705 071084905 480154400 016014100 016013500 071081805 071085005 480351422 480155200 016014200 016013600 480352432 071081905 071085105 480155462 016014300 016013700 480353400 071082005 071085205 480353600 071082105 071085305 BUNA SEALS // MODEL GA FLAPPER TYPE VALVE 480354200 071082205 071085405 Assembly Rubber Repair Kit Metal Repair Kit 480354400 071082305 071085505 480161422 051988300 052070800 480355200 071082405 071085605 480162432 016013800 017135000 480355462 071082505 071085705 480163400 016013900 017136700 480356400 071082605 071085805 480163600 051982000 052075500 480164200 017116000 HSN SEALS // MODEL016014000 FC PLUNGER TYPE VALVE 480164400 016014100 017136800 VITON SEALS // MODEL F PLUNGER Assembly Rubber Repair Kit TYPE VALVE Metal Repair Kit 480165200 016014200 017136900 Assembly Rubber Repair Kit Metal Repair Kit 480322432 071081901 070017100 480165462 016014300 017134200 480361200 072081703 071084901 070017300 480323400 071082001 480361422 072081803 071085001 480323600 071082101 070017300 BUNA SEALS // MODEL GAS FLAPPER TYPE VALVE 480362432 072081903 071085101 070017400 480324200 071082201 Assembly Rubber Repair Kit Metal Repair Kit 480363400 072082003 071085201 480324400 071082301 070017500 480563600 016016000 017138000 480363600 072082103 071085301 070017600 480325200 071082401 480564290 016014500 017134400 480364200 072082203 071085401 480325462 071082501 070017700 480564200 016019000 017116000 480364400 072082303 071085501 480326400 071082601 070017800 480564400 016020000 017136800 480365200 072082403 071085601 480565200 017139000 480365462 072082503 071085701 HSN SEALS // MODEL016017000 G FLAPPER TYPE VALVE 480625462 016021000 017134300 480366400 072082603 071085801 Assembly Rubber Repair Kit Metal Repair Kit 480565462 016015000 017137000 480311422 051997200 051997300 VITON SEALS // MODEL FA PLUNGER TYPE071085901 VALVE 480312432 071082701 Assembly Rubber Repair Kit Metal Repair Kit 480313400 071082801 071086001 480411200 072081705 071084905 480313600 052125001 052125101 480411422 072081805 071085005 480314200 071082901 071086101 480412432 072081905 071085105 480314400 071083001 071086201 480413400 072082005 071085205 480315200 071083101 071086301 480413600 072082105 071085305 480315462 071083201 071086401 480414200 072082205 071085405 480414400 071085505 HSN SEALS // MODEL072082305 GA FLAPPER TYPE VALVE 480415200 072082405 071085605 Assembly Rubber Repair Kit Metal Repair Kit 480415462 072082505 071085705 480261422 051997200 052070802 480416400 072082605 071085805 071082701 017135001 480262432 480263400 071082801 017136701 VITON SEALS // MODEL FC PLUNGER TYPE052075502 VALVE 480263600 052125001 Assembly Rubber Repair Kit Metal Repair Kit 480264200 071082901 017116002 480382432 072081903 070017100 017136801 480264400 071083001 480383400 072082003 070017300 480265200 071083101 017136901 480383600 072082103 070017300 017134201 480265462 071083201 480384200 072082203 070017400 480384400 HSN SEALS // MODEL072082303 GAS FLAPPER TYPE 070017500 VALVE 480385200 072082403 070017600 Assembly Rubber Repair Kit Metal Repair Kit 480385462 072082503 070017700 480693600 016016001 017138002 480386400 072082603 070017800 480694290 016014501 017134402 480694200 016019001 017116002 VITON SEALS // MODEL G FLAPPER TYPE VALVE 017136802 480694400 016020001 Assembly Rubber Repair Kit Metal Repair Kit 480695200 016017001 017139002 480371422 051988303 051988403 017134302 480645462 016021001 480372432 016013803 016013203 480695462 016015001 017137002 480373400 016013903 016013303 480373600 051982003 052070203 480374200 016014003 016013403 480374400 016014103 016013503 480375200 016014203 016013603 480375462 016014303 016013703

Ordering Information // Hydrogen Sulfide (H2S) Application BUNA SEALS // MODEL FC PLUNGER TYPE VALVE Float Valve Size Assembly Rubber Repair Mento Kit MetalSupply Repair Kit Oilfield Catalogue

480916400 Puller Assembly 480912432 480913400 Puller Assembly 480913400 480911200 480914200 480911200 480914400 480912432 480915200 480913400 480915462 480913400 480916400 480914200 480914400 480915200 Puller Assembly 480915462 480901422 480916400 480902432 480903400 480903400 Puller Assembly 480904200 480911200 480904400 480911200 480905200 480912432 480905462 480913400 480913400 480914200 Puller Assembly 480914400 480901422 480915200 480902432 480915462 480903400 480916400 480903400 480904200 480904400 Puller Assembly 480905200 Puller Assembly 480912432 480905462 480911200 480913400 480911200 480913400 480912432 480914200 Puller Assembly 480913400 480914400 480903400 480913400 480915200 480903400 480914200 480915462 480904200 480914400 480916400 480904400 480915200 480905200 480915462 480905462 480916400 Puller Assembly 480905462 480901422 480902432 Puller Assembly 480903400 480911200 480903400 480911200 480904200 480912432 480904400 480913400 480905200 480913400 480905462 480914200 480914400 480915200 Puller Assembly 480915462 480901422 480916400 480902432 480903400 480903400 Puller Assembly 480904200 480912432 480904400 480913400 480905200 480913400 480905462 480914200 480914400 480915200 Puller Assembly 480915462 480903400 480916400 480903400 480904200 480904400 Puller Assembly 480905200 480901422 480905462 480902432 480905462 480903400 480903400 480904200 480904400 480905200 480905462

7. Drill Pipe Float Valves/Kelly Valves

Ordering Information // Standard Application

Ordering Information // Hi-Temp Application

Ordering Information // Hydrogen Sulfi de (H2S) Application

Ordering Information // Hi-Temp Application

Float Valve Size

VITON SEALS // MODEL GA FLAPPER TYPE VALVE Assembly

Rubber Repair Kit

Metal Repair Kit

Puller Assembly

1F - 2R 2F - 3R 3F 3 - 1/2 IF 4R 4F 5R 5F - 6R

480441422 480442432 480443400 480443600 480444200 480444400 480445200 480445462

051988303 016013803 016013903 051982003 016014001 016014103 016014203 016014303

052070803 017135003 017136703 052075503 017116001 017136803 017136903 017134203

480901422 480902432 480903400 480903400 480904200 480904400 480905200 480905462

Float Valve Size

Assembly

Rubber Repair Kit

Metal Repair Kit

Puller Assembly

3 - 1/2 IF

480713600

016016003

017138003

480903400

VITON SEALS // MODEL GAS FLAPPER TYPE VALVE

Mento Oilfield Supply Catalogue

1. Pipe 8. Jet Lube Wipers / Hougthon

Pipe Wipers • •

STRIPPER RUBBERS PIPE WIPERS

2. EDITION

Mento Oilfield Supply Catalogue

8. Pipe Wipers

Stripper Rubbers

Part Number Item Description JU Stripper Rubber OPP-JU-200 JU Stripper Rubber, 2-3/8” OPP-JU-250 JU Stripper Rubber, 2-7/8” OPP-JU-350 JU Stripper Rubber, 3-1/2” BIW Stripper Rubber OPP-BIW-200 BIW Stripper Rubber, 2-3/8” OPP-BIW-250 BIW Stripper Rubber, 2-7/8” OPP-BIW-350 BIW Stripper Rubber, 3-1/2” Texas Short Hall Stripper Rubber OPP-TSH-216 Texas Short Hall Stripper Rubber, 2-1/16” OPP-TSH-200 Texas Short Hall Stripper Rubber, 2-3/8” OPP-TSH-250 Texas Short Hall Stripper Rubber, 2-7/8” OPP-TSH-350 Texas Short Hall Stripper Rubber, 3-1/2” Texas Short Hall Stripper Head OPP-STRPHD-SHORT Texas Stripper Head - short OPP-STRPRHD Texas Stripper Head - regular EE Stripper Rubber OPP-EERS Double “E” Road Stripper Rubber Coil Turbing Stripper Rubber OPP-COIL-3X125 3” Urethane Stripper 1.25” OPP-COIL-3X1 3” Urethane Stripper 1”

Pipe Wipers

Part Number Item Description Flat Wipers - Black OPP-FW-9100 9” Flat Pipe Wiper, 1” OPP-FW-9125 9” Flat Pipe Wiper, 1-1/4” OPP-FW-9150 9” Flat Pipe Wiper, 1-1/2” OPP-FW-9200 9” Flat Pipe Wiper, 2-3/8” OPP-FW-9200 Square 9” Flat Pipe Wiper, 2-3/8” OPP-FW-9250 9” Flat Pipe Wiper, 2-7/8 OPP-FW-9350 9” Flat Pipe Wiper, 3-1/2 OPP-FW-1220 12” Flat Pipe Wiper OPP-FW-1420 14” Flat Pipe Wiper OPP-FW-1720 17” Flat Pipe Wiper OPP-FW-1920 19” Flat Pipe Wiper OPP-FW-2220 22” Flat Pipe Wiper OPP-FW-2420 24” Flat Pipe Wiper OPP-FW-2620 26” Flat Pipe Wiper Dual Split Wipers - Black OPP-DW-1420 14” Dual Pipe Wiper OPP-DW-1720 17” Dual Pipe Wiper OPP-DW-1920 19” Dual Pipe Wiper OPP-DW-2220 22” Dual Pipe Wiper OPP-DW-2420 24” Dual Pipe Wiper Flat Wipers - Red OPP-FW-1720RED 17” Flat Red Pipe Wiper OPP-FW-1920RED 19” Flat Red Pipe Wiper OPP-FW-2220RED 22” Flat Red Pipe Wiper OPP-FW-2420RED 24” Flat Red Pipe Wiper OPP-FW-2620RED 26” Flat Red Pipe Wiper Dual Split Wipers - Red OPP-DW-1720RED 17”Dual Red Pipe Wiper OPP-DW-1920RED 19”Dual Red Pipe Wiper OPP-DW-2220RED 22” Dual Red Pipe Wiper OPP-DW-2420RED 24” Flat Red Pipe Wiper Handle Bar Wipers OPP-HBPW-10125 10”x1-1/4” Handle Bar Pipe Wiper OPP-HBPW-1020 10”x2-3/8”” Handle Bar Pipe Wiper OPP-HBPW-1025 10”x2-7/8” Handle Bar Pipe Wiper

Mento Oilfield Supply Catalogue

1. Accumulators 9. Jet Lube / Hougthon

Accumulators • •

BLADDER ACCUMULATORS PISTON ACCUMULATORS

2. EDITION

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves BLADDER ACCUMULATORS High pressure Nominal volumes: 1 ... 54 l Permitted operating pressure: 5 ... 1000 bar

PISTON ACCUMULATORS

Capacity from 0.5 to over 1000 litres and are available in any pressure between 5 and 3000 bar.

Mento Oilfield Supply Catalogue

7. Drill Pipe Float Valves/Kelly Valves

Mento Oilfield Supply Catalogue

1. JetSupply 10. Lube / Hougthon

Supply

10.

Your partner in Oilfield Supply • We can handle sourcing and purchasing for Offshore customers. • We have a long track record doing this for several customers. • We have nominated personnel with long experience within the ”product range”. • Ask us for an agreement. • Try us and reduce your number of suppliers.

2. EDITION

Mento Oilfield Supply Catalogue

10. Supply

8 Supply

Oilfield Supply Management Agreements Competence

Solutions

Customer relations

Oilfield Supply Management

After market

Service

Logistics

Mento offer our customers one center of service for their total needs. We simplify purchase and logistics by reducing the number of suppliers and offers a more cost effective operation. • More than 30 years of experience as oilfield supplier • Total supplier in existing and new projects • Several locations in Norway