rottluff

Page 1

2009 www.rottluff.com katalog_2009_Englisch.indd 1

16.07.09 14:09


Sales Territories worldwide - always at your side

Rottluff - Made in Germany

4

E40

4

E40

Leipzig

Dresden Leipzig

motorway junction Chemnitz

Le

ipz

ige

Hainichen rS

tra

Limbach-Oberfrohna

E441 junction Chemnitz Rottluff

Freiberg 173

95

72

Erfurt

107

ße

108 Limbacher Straß

e

Chemnitz city center

174 173

Zwickauer Straße

Hohenstein/ Ernstthal

Ne

efe

str

dr

junction Chemnitz Süd

e

169

Marienberg Tschechien

95

i ng

E441

Südri

72

Zwickau / Hof

Stollberg

ng

Annaberg

Schleifscheibenfabrik Rottluff GmbH Weideweg 17 l D-09116 Chemnitz Postal adress: Postfach 900136 l D-09037 Chemnitz Telephone: +49 (0) 371 3 69 95-0 Telefax: +49 (0) 371 3 69 95-30 e-Mail: info@rottluff.com

2 katalog_2009_Englisch.indd 2

www.rottluff.com 16.07.09 14:09


Contents Company profile, delivery program, safety instructions, technical information

page 4

Freehand cutting discs

page 10

Freehand grinding discs

page 20

Stationary cutting discs

page 26

Coated abrasives

page 28

Diamond cutting tools

page 36

Cup wheels and grinding rings

page 40

Wire brushes

page 42

Extras

page 44

General Terms and Conditions; signs and symbols

www.rottluff.com katalog_2009_Englisch.indd 3

3 16.07.09 14:09


Philosophy

At present, economics, engineering and society are subject to fundamental changes. The footrace for new marketable products, technological progress, quality, productivity and marketing strategies has attained an absolute new dimension. There is no sure formula and no ideal way for success when competing in the close-ranking global market. However, one thing is definite: the pace, at which the change is enforced, requires strategies based on the prime virtues - quality, speed of action and flexibility. What has always been appreciated and will also be esteemed in the future are dynamics, professionalism and innovative strength. More than ever, it is a question of adjusting themselves quickly and most flexibly to market changes, of acting rather than reacting. And at the same time, priority must be given to the maximisation of customer value. Up to this maxim, we have been acting under the Rottluff brand for 100 years.

www.rottluff.com katalog_2009_Englisch.indd 4

16.07.09 14:09


Company

At our site everything has revolved around discs ever since Wilhelm Gräfe founded the company about 100 years ago. State-of-the-art technology is just as important as corporate culture and customer service. Thus we can be flexible in responding to your needs and find pragmatic solutions. Rottluff ®: Your benefit Our 100 years of experience with grinding and cutoff wheels is your benefit: We know what counts – products free from defects, short distances, clear responsibilities, delivery reliability, efficiency and an unbureaucratic approach even at special requests. We supply worldwide and know both regional requirements and specific features. Rottluff: Certified quality and safety We are certified according to EN ISO 9001: 2000; our products comply with the requirements of oSa ANSI B 7.1 EN 12413 EN 13236

We have made investments in the future and we work with Europe’s most state-of-the-art automatic presses. That way we guarantee absolutely consistent thickness and compression. Regarding the production of flap discs, we also focus on sophisticated automated manufacture. You can depend on that.

Our curing ovens’ electronic control does not allow for temperature deviations. Consequentially, optimum curing/ hardening is ensured; variations in quality and safety standards of cut off or grinding wheels are excluded. The recording of firing curves enables that the manufacturing procedure is effectively monitored.

EN 13743

Quality means: competent practical advice and a design customised to suit the task, consistent quality at a high level as well as delivery reliability. A consistently deployed quality management system (ISO 9001: 2000) with batch testing for raw materials and continual monitoring of manufacturing processes facilitates the implementation of these objectives. Complete documentation ensures the highest possible level of traceability and thus a consistently high quality standard. A tailored design facilitates the comprehensive product range effortlessly meeting the various requirements demanded by materials and machines. Our employees’ substantial grinding engineering expertise makes them your partner for all questions and demands. A special mixing method – chemical coating (cc) – enables a precise reproduction of formulations band mixing ratios. Modern manufacturing technologies and select raw materials guarantee both high tool life and optimum performance of our grinding wheels.

Distances are no problem for us. Wherever you need us – we are at your side. Our innovative export concepts and outstanding export services were awarded the Export Prize for the East German Economy.

www.rottluff.com katalog_2009_Englisch.indd 5

5 16.07.09 14:10


Delivery program

Rottluff’s products are characterised by long lifetimes and short cutting times. Both the tailored design (grit, bond, structure, shape, configuration) and the state-of-the-art manufacturing technology enable a broad choice of products. Our company produces a wide range of cutting off and grinding discs to cover any kind of customer needs. The product lines have different cost/performance ratios and are suited for complying with all requirements arising from the diverse markets:

The PROMAXcc line was developed to satisfy the highest demands of users and specialist trade. Stock removal and lifetime are well above average. Due to the convenient handling, labour costs decrease significantly.

PREMIUMFLEX grinding wheels show a good performance at a very favourable price. They can be used for a multitude of materials, including steel, aluminium, high-grade steel, stone and cast.

6 katalog_2009_Englisch.indd 6

www.rottluff.com 16.07.09 14:10


Labelling

A = Aluminium oxide for metalworking C = Silicon carbide for stone, cast iron and aluminium working X = hardness range (A = soft to hard = Z) 60 = Grit size (16/very coarse, 36/medium, 60/fine) B = Resinoid bond F = cloth reinforced with fibre glass Safety certificat 100m/s = (green) max. operating speed 80m/s = (red) max. operating speed 63m/s = (yellow) max. operating speed 50m/s = (blue) max. operating speed Application Manufactured according to EN 12413 Article number Made in Germany Safety and operation instructions

125 x 1 x 22,23 = D x b x a 5“ x 0.04“ x 7/8“ = D x b x a Diameter x thickness x bore size Barcode

T 41 T 42

T 27

T 28

(USA Type 1)

cut-off wheels (0,8mm - 4,5mm)

grinding wheels (4mm - 10mm)

grinding wheels (6mm - 8mm)

(USA Type 27)

(USA Type 27)

T 41: Straight cut-off wheels. Available in diameters from 76 (3“) to 230 mm (9“) for freehand applications, from 300 mm (12“) to 500 mm (20“) for use in stationary machines T 42: Depressed centre cut-off wheels. Available in diameters from 76 (3“) to 230 mm (9“), allowed for freehand use. T 27, T 28: Depressed centre grinding wheels. Available in diameters from 76 (3“) to 230 mm (9“), allowed for freehand use.

(USA Type 28)

www.rottluff.com katalog_2009_Englisch.indd 7

7 16.07.09 14:10


Occupational health and safety DON’T use a machine without a wheel guard. With regard to occupational safety and operational convenience, Schleifscheibenfabrik Rottluff’s responsibility to the customer is taken very seriously. Our products are designed, manufactured and produced in accordance with the most stringent quality standards to provide a maximum of customer value at minimum risk. We are a member of both, the German Abrasive Association (VDS) and the Organisation for the Safety of Abrasives (oSa) and thus actively contribute to users’ health and safety. Applied standards: · Safety Requirements for Bonded Abrasives Products: EN12413:2007 · Safety Requirements for Coated Abrasives EN13236:2001 · Safety Requirements for Diamond Blades EN13743:2002

DON’T handle wheels roughly. DON’T use non-reinforced cut-off wheels on portable machines.

DON’T use wheels without proper ventilation or dust protection equipment. DON’T apply side pressure to cut-off wheels. You should not bend the wheel. DON’T stop the wheel by applying pressure to the periphery or face. Always switch the machine off and allow the wheel to stop revolving. DON’T allow the wheel to be trapped or pinched in the cut. DON’T apply excessive pressure onto the wheel so that the driving motor slows down. DON’T grind on the side of the cut-off wheels or depressed centre wheels below 4.0 mm thickness. DON’T drop or lower a portable machine by the cable or airline onto the floor. A wheel can be easily cracked, if it is put down hard, by the weight of the machine. This is a common cause of wheel breakage. DON’T grind with a depressed centre grinding wheel at an angle below 30 degrees to the workpiece. DON’T use a machine in a position where you do not have full control of the machine and you are not well balanced.

DON’T store wheels in a damp atmosphere or in extreme temperatures. DON’T mount a damaged wheel. DON’T EVER exceed the maximum operating speed marked on the wheel. DON’T force a wheel onto a machine spindle. DON’T use mounting flanges which are incorrect, damaged, dirty or burred. DON’T tighten the mounting nut or locking flange excessively. To do so can distort the flanges.

Clamping System

The use of flanges with unequal diameters is not allowed. Both flanges between which the bonded abrasive is fixed must have the same outer diameter and similar contact areas (according to EN 68, ASA 1788.1, and ANSI B.7.1). correct

wrong

8 katalog_2009_Englisch.indd 8

www.rottluff.com 16.07.09 14:10


Technical Information Durability Resinoid bonded grinding wheels for freehand applications must be depleted within three years upon manufacture. Metal ring indicating the date of expiry: V =date of expiry (quarter of manufacture plus 3 years)

V01

V04

V07

V10

1st quarter

2nd quarter

3rd quarter

4th quarter

Labelling system for resinoid bonded grinding wheels Abrasive Typee

Grit

Hardness Grade

Bond

A

30/ 36

V

BF

coarse

medium

fine

soft

medium

hard

A - aluminium oxide

12

36

60

P

S

U

B - resinoid bond

C - silicon carbide

to

to

to

M

R

V

BF - resinoid bond, fibre-reinforced

Z - zirconia alumina

24

54

120

P

R

X

Operating speeds Rottluff grinding wheels and discs are developed and tested for particular working speeds and grinding processes. Prior to the fixing of the grinding tool on the machine, it must be ensured that the machine’s nominal speed (as specified on nameplate) does not exceed the maximum operating speed indicated on the grinding wheel or disc. Maximum Circumferential Speed

Diameter of Disc (inch/mm) 4“/100 4½“/115 5“/125

6“/150

7“/180

9“/230 12“/305 14“/355 16“/406

80 m/s

15.300 13.300 12.250 10.200

8.500

6.650

5.100

4.400

3.850

100 m/s

19.100

10.650

8.350

6.400

5.500

4.800

16.650 15.300 12.700

www.rottluff.com katalog_2009_Englisch.indd 9

9 16.07.09 14:10


Freehand cutting discs

Thin cut-off wheels

most suitable

suitable

PROMAXcc

BEST LIFE A60X-BF

PROMAXcc

BEST LIFE A46X-BF

PROMAXcc

A60X-BF INOX

PROMAXcc

A46X-BF INOX

PROMAXcc

A60T-BF INOX

PROMAXcc

A60N-BF ALU

PROMAXcc

A46N-BF ALU

Ti

S

PREMIUMFLEX A46T-BF PREMIUMFLEX A60S-BF INOX PREMIUMFLEX A46T-BF INOX PREMIUMFLEX C46R-BF

cut-off wheels

PREMIUMFLEX A46S-BF INOX PROMAXcc

BEST LIFE A30X-BF

PROMAXcc

BEST CUT ZA30S-BF

PROMAXcc

A30U-BF

PROMAXcc

A36U-BF

PROMAXcc

A30U-BF INOX

PROMAXcc

A36U-BF INOX

PROMAXcc

ZA24R-BF

PROMAXcc

A36N-BF ALU

PREMIUMFLEX A24R-BF PREMIUMFLEX A36T-BF PREMIUMFLEX A30/36V-BF PREMIUMFLEX C30S-BF

big cut-off wheels

PREMIUMFLEX AC24R-BF PROMAXcc

ZA30R-BF

PROMAXcc

ZA30Q-BF

PREMIUMFLEX A30Q-BF PREMIUMFLEX A24R-BF PREMIUMFLEX AC24R-BF PREMIUMFLEX C24R-BF

www.rottluff.com katalog_2009_Englisch.indd 10

16.07.09 14:10


Structure and Components Year of expiry Month of expiry = October

metal ring commercial Rottluff disc with label

Strong fibre glass reinforcement for additional safety and lateral stability

Active fillers for better cutting performance

Mixture with high-quality grains Bonding matrix = fillers + phenolic resins Abrasive Bonded abrasive

Abrasive materials

Semi-friable corundum Zirconia aluminia

Vitrified coated roasted corundum

3M CUBITRON

www.rottluff.com katalog_2009_Englisch.indd 11

11 16.07.09 14:10


Freehand cutting discs PROMAXcc® BEST LIFE A60X-BF Quality A60X-BF A60X-BF

D x b x a (inch) 4½“ x 0,04“ x 7/8“ 5“ x 0,04“ x 7/8“

D x b x a (mm) 115 x 1,0 x 22,23 125 x 1,0 x 22,23

80 m/s

Type 41 41

Article T005840 T005835

PROMAXcc® BEST LIFE A46X-BF Quality A46X-BF A46X-BF Life time very high

D x b x a (inch) 4½“ x 1 1/16“ x 7/8“ 5“ x 1 1/16“ x 7/8“ Cutting speed high

D x b x a (mm) 115 x 1,6 x 22,23 125 x 1,6 x 22,23 Substance of content ferrous

80 m/s Type 41 41

Article T013301 T013302

PROMAXcc® A60X-BF INOX Quality A60X-BF INOX A60X-BF INOX A60X-BF INOX A60X-BF INOX

D x b x a (inch) 4½“ x 1 1/32“ x 7/8“ 4½“ x 0,04“ x 7/8“ 5“ x 1/32“ x 7/8“ 5“ x 0,04“ x 7/8“

D x b x a (mm) 115 x 0,8 x 22,23 115 x 1,0 x 22,23 125 x 0,8 x 22,23 125 x 1,0 x 22,23

Type Article

Type 42 T010101 42 42 T010102 42

41 41

D x b x a (mm) 115 x 1,6 x 22,23 125 x 1,6 x 22,23 150 x 1,6 x 22,23 180 x 1,6 x 22,23 230 x 1,8 x 22,23 Substance of content Fe, S and Cl (<0,1%)

PROMAXcc® A60T-BF INOX

Article T010201 T010202 T000980 T000981 T000982

Type 42 42 42 42 42

Article

D x b x a (mm) 115 x 1,0 x 22,23 125 x 1,0 x 22,23

Quality D x b x a (inch) D x b x a (mm) A46N-BF ALU 4½“ x 1/16“ x 7/8“ 115 x 1,6 x 22,23 A46N-BF ALU 5“ x 1/16“ x 7/8“ 125 x 1,6 x 22,23 A46N-BF ALU 6“ x 1/16“ x 7/8“ 150 x 1,6 x 22,23 A46N-BF ALU 7“ x 1/16“ x 7/8“ 180 x 1,6 x 22,23 A46N-BF ALU 9“ x 1/16“ x 7/8“ 230 x 1,8 x 22,23 Life time Cutting speed Substance of content good high iron-free

katalog_2009_Englisch.indd 12

Article T001611 T001615 T001616 T001621 T001626

T001634 T001655 T001685

Type 42 42

Article T002376 T004266

42 42

T001210 T000462

Type 41 41

50 50 50 50 50

Type 41 41 41 41 41

Article T004776 T004788 T001000 T000985 T002613

50 50 50 50 50

80 m/s

Article T000920 T000950

PROMAXcc® A46N-BF ALU

12

50 50 50 50

80 m/s

PROMAXcc® A60N-BF ALU D x b x a (inch) 4½“ x 0,04“ x 7/8“ 5“ x 0,04“ x 7/8“

Article T000948 T001220 T000949 T010104

80 m/s

Type 41 41 41 41 41

Quality D x b x a (inch) D x b x a (mm) Type A60T-BF INOX 4“ x 1/32 x 5/8“ 100 x 0,8 x 16,0 A60T-BF INOX 4½“ x 1 1/32“ x 7/8“ 115 x 0,8 x 22,23 A60T-BF INOX 4“ x 0,04 x 5/8“ 100 x 1,0 x 16,0 41 A60T-BF INOX 4½“ x 0,04“ x 7/8“ 115 x 1,0 x 22,23 41 A60T-BF INOX 5“ x 0,04“ x 7/8“ 125 x 1,0 x 22,23 41 Life time Cutting speed Substance of content high good Fe, S and Cl (<0,1%)

Quality A60N-BF ALU A60N-BF ALU

50 50

80 m/s

PROMAXcc® A46X-BF INOX Quality D x b x a (inch) A46X-BF INOX 4½“ x 1 1/16“ x 7/8“ A46X-BF INOX 5“ x 1 1/16“ x 7/8“ A46X-BF INOX 6“ x 1/16“ x 7/8“ A46X-BF INOX 7“ x 1/16“ x 7/8“ A46X-BF INOX 9“ x 1/16“ x 7/8“ Life time Cutting speed very high high

50 50

50 50

80 m/s 50 50 50 50 50

www.rottluff.com 16.07.09 14:10


Freehand cutting discs PREMIUMFLEX® A46T-BF Quality A46T-BF A46T-BF A46T-BF A46T-BF A46T-BF A46T-BF A46T-BF Life time medium

D x b x a (inch) 4½“ x 3/64“ x 7/8“ 4½“ x 1/16“ x 7/8“ 5“ x 1/16“ x 7/8“ 5“ x 1/16“ x 7/8“ 6“ x 1/16“ x 7/8“ 7“ x 1/16“ x 7/8“ 9“ x 1/16“ x 7/8“ Cutting speed good

D x b x a (mm) 115 x 1,2 x 22,23 115 x 1,6 x 22,23 125 x 1,2 x 22,23 125 x 1,6 x 22,23 150 x 1,6 x 22,23 180 x 1,6 x 22,23 230 x 1,8 x 22,23 Substance of content ferrous

Type 41 41 41 41 41 41 41

Article T000644 T000648 T000671 T000675 T000701 T000717 T000743

PREMIUMFLEX® A60S-BF INOX Quality D x b x a (inch) A60S-BF INOX 4½“ x 0,04 x 7/8“ A60S-BF INOX 5“ x 0,04“ x 7/8“ Life time Cutting speed medium good

D x b x a (mm) 115 x 1,0 x 22,23 125 x 1,0 x 22,23 Substance of content Fe, S and Cl (<0,1%)

80 m/s 50 50 50 50 50 50 50

Type 41 41

80 m/s

Article T004643 T002672

50 50

PREMIUMFLEX® A46T-BF INOX 80 m/s Quality D x b x a (inch) A46T-BF INOX 4“ x 3/64“ x 5/8“ A46T-BF INOX 4“ x 1/16“ x 5/8“ A46T-BF INOX 4½“ x 1/16“ x 7/8“ A46T-BF INOX 5“ x 1/16“ x 7/8“ A46T-BF INOX 6“ x 1/16“ x 7/8“ A46T-BF INOX 7“ x 1/16“ x 7/8“ A46T-BF INOX 9“ x 1/16“ x 7/8“ Life time Cutting speed medium good

D x b x a (mm) Type 100 x 1,2 x 16,0 41 100 x 1,6 x 16,0 41 115 x 1,6 x 22,23 41 125 x 1,6 x 22,23 41 150 x 1,6 x 22,23 41 180 x 1,6 x 22,23 41 230 x 1,8 x 22,23 41 Substance of content Fe, S and Cl (<0,1%)

Article T000628 T000630 T000647 T000674 T000700 T000716 T000742

Type

Article

42 42

T000649 T000676

42 42

T000718 T000744

PREMIUMFLEX® C46R-BF Quality C46R-BF C46R-BF C46R-BF C46R-BF C46R-BF Life time medium

D x b x a (inch) 4½“ x 1/16“ x 7/8“ 5“ x 1/16“ x 7/8“ 6“ x 1/16“ x 7/8“ 7“ x 1/16“ x 7/8“ 9“ x 1/16“ x 7/8“ Cutting speed good

D x b x a (mm) 115 x 1,6 x 22,23 125 x 1,6 x 22,23 150 x 1,6 x 22,23 180 x 1,6 x 22,23 230 x 1,8 x 22,23 Substance of content ferrous

Type 41 41 41 41 41

50 50 50 50 50 50 50

80 m/s Article T002317 T002377 T002379 T002381 T001372

S

50 50 50 50 50

www.rottluff.com katalog_2009_Englisch.indd 13

13 16.07.09 14:10


Freehand cutting discs PREMIUMFLEX® A46S-BF INOX Quality D x b x a (inch) D x b x a (mm) A46S-BF INOX 2“ x 3/64“ x 1/4“ 50 x 1,0 x 6,0 A46S-BF INOX 2“ x 3/64“ x 3/8“ 50 x 1,0 x 10,0 A46S-BF INOX 2“ x 1/16“ x 1/4“ 50 x1,6 x 6,0 A46S-BF INOX 2“ x 1/16“ x 3/8“ 50 x 1,6 x 10,0 A46S-BF INOX 2“ x 5/6“ x 1/4“ 50 x 2,0 x 6,0 A46S-BF INOX 2“ x 5/64“ x 3/8“ 50 x 2,0 x 10,0 A46S-BF INOX 2“ x 1/8“ x 1/4“ 50 x 3,0 x 6,0 A46S-BF INOX 2“ x 1/8“ x 3/8“ 50 x 3,0 x 10,0 A46S-BF INOX 2-1/2“ x 3/64“ x 1/4“ 65 x 1,0 x 6,0 A46S-BF INOX 2-1/2“ x 3/64“ x 3/8“ 65 x 1,0 x 10,0 A46S-BF INOX 2-1/2“ x 1/16“ x 1/4“ 65 x 1,6 x 6,0 A46S-BF INOX 2-1/2“ x 1/16“ x 3/8“ 65 x 1,6 x 10,0 A46S-BF INOX 2-1/2“ x 5/64“ x 1/4“ 65 x 2,0 x 6,0 A46S-BF INOX 2-1/2“ x 5/64“ x 3/8“ 65 x 2,0 x 10,0 A46S-BF INOX 2-1/2“ x 1/8“ x 1/4“ 65 x 3,0 x 6,0 A46S-BF INOX 2-1/2“ x 1/8“ x 3/8“ 65 x 3,0 x 10,0 A46S-BF INOX 3“ x 3/64“ x 1/4“ 76 x 1,0 x 6,0 A46S-BF INOX 3“ x 3/64“ x 5/16“ 76 x 1,0 x 8,0 A46S-BF INOX 3“ x 3/64“ x 3/8“ 76 x 1,0 x 10,0 A46S-BF INOX 3“ x 5/6“ x 1/4“ 76 x 2,0 x 6,0 A46S-BF INOX 3“ x 5/6“ x 5/16“ 76 x 2,0 x 8,0 A46S-BF INOX 3“ x 5/6“ x 3/8“ 76 x 2,0 x 10,0 A46S-BF INOX 3“ x 1/8“ x 1/4“ 76 x 3,0 x 6,0 A46S-BF INOX 3“ x 1/8“ x 5/16“ 76 x 3,0 x 8,0 A46S-BF INOX 3“ x 1/8“ x 3/8“ 76 x 3,0 x 10,0 Other sizes are available on request. Life time Cutting speed Substance of content medium good Fe, S and Cl (<0,1%)

14 katalog_2009_Englisch.indd 14

Type 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41

80 m/s Article T501006 T501010 T501606 T501610 T502006 T502010 T503006 T503010 T651006 T651010 T651606 T651610 T652006 T652010 T653006 T653010 T761006 T761008 T761010 T762006 T762008 T762010 T763006 T763008 T763010

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

www.rottluff.com 16.07.09 14:10


Freehand cutting discs PROMAXcc® BEST LIFE A30X-BF Quality A30X-BF A30X-BF A30X-BF A30X-BF A30X-BF Life time very high

D x b x a (inch) 4½“ x 3/32“ x 7/8“ 5“ x 3/32“ x 7/8“ 6“ x 3/32“ x 7/8“ 7“ x 3/32“ x 7/8“ 9“ x 3/32“ x 7/8“ Cutting speed very good

D x b x a (mm) Type 115 x 2,5 x 22,23 41 125 x 2,5 x 22,23 41 150 x 2,5 x 22,23 41 180 x 2,5 x 22,23 41 230 x 2,5 x 22,23 41 Substance of content ferrous

Article T012047 T011086 T012045 T012049 T012050

80 m/s Type 42 42 42 42 42

PROMAXcc® BEST CUT ZA30S-BF Quality ZA30S-BF ZA30S-BF ZA30S-BF Life time very high

D x b x a (inch) 5“ x 3/32“ x 7/8“ 7“ x 1/8“ x 7/8“ 230 x 3,2 x 22,23 Cutting speed good

D x b x a (mm) Type Article Type 125 x 2,5 x 22,23 41 T004700 42 180 x 3,0 x 22,23 41 T004761 42 230 x 3,2 x 22,23 41 T004581 42 Substance of content ferrous; suitable for high frequency machines

D x b x a (inch) 4“ x 3/32“ x 5/8“ 4½“ x 3/32“ x 7/8“ 5“ x 3/32“ x 7/8“ 6“ x 3/32“ x 7/8“ 6“ x 1/8“ x 7/8“ 7“ x 3/32“ x 7/8“ 7“ x 1/8“ x 7/8“ 9“ x 3/32“ x 7/8“ 9“ x 1/8“ x 7/8“ Cutting speed very good

D x b x a (mm) Type 100 x 2,5 x 16,0 115 x 2,5 x 22,23 41 125 x 2,5 x 22,23 41 150 x 2,5 x 22,23 41 150 x 3,0 x 22,23 180 x 2,5 x 22,23 41 180 x 3,0 x 22,23 41 230 x 2,5 x 22,23 41 230 x 3,0 x 22,23 41 Substance of content ferrous

Article T001660 T001690 T001720 T001746 T001759 T001785 T001799

D x b x a (inch) 4“ x 5/64“ x 5/8“ 4½“ x 5/64“ x 7/8“ 5“ x 5/64“ x 7/8“ 6“ x 5/64“ x 7/8“ 7“ x 5/64“ x 7/8“ 9“ x 5/64“ x 7/8“ Cutting speed very good

D x b x a (mm) 100 x 2,0 x 16,0 115 x 2,0 x 22,23 125 x 2,0 x 22,23 150 x 2,0 x 22,23 180 x 2,0 x 22,23 230 x 2,0 x 22,23 Substance of content ferrous

Type 41 41 41 41 41 41

Type 42 42 42 42 42 42 42 42 42

D x b x a (mm) Type 100 x 2,5 x 16,0 115 x 2,5 x 22,23 41 125 x 2,5 x 22,23 41 150 x 2,5 x 22,23 41 180 x 2,5 x 22,23 41 180 x 3,0 x 22,23 41 230 x 2,5 x 22,23 41 230 x 3,0 x 22,23 41 Substance of content Fe, S and Cl (<0,1%)

Article T001642 T001665 T001695 T001724 T002056 T001750 T001762 T001790 T001802

Article T000556 T001656 T001686 T001717 T001742 T001781

Article T001661 T001691 T001721 T001747 T002758 T001786 T002796

25 25 25

25 25 25 25 25 25 25 25 25

80 m/s

PROMAXcc® A30U-BF INOX Quality D x b x a (inch) A30U-BF INOX 5“ x 3/32“ x 5/8“ A30U-BF INOX 4½“ x 3/32“ x 7/8“ A30U-BF INOX 5“ x 3/32“ x 7/8“ A30U-BF INOX 6“ x 3/32“ x 7/8“ A30U-BF INOX 7“ x 3/32“ x 7/8“ A30U-BF INOX 7“ x 1/8“ x 7/8“ A30U-BF INOX 9“ x 3/32“ x 7/8“ A30U-BF INOX 9“ x 1/8“ x 7/8“ Life time Cutting speed high very good

Article T004702 T004735 T005539

80 m/s

PROMAXcc® A36U-BF Quality A36U-BF A36U-BF A36U-BF A36U-BF A36U-BF A36U-BF Life time high

25 25 25 25 25

80 m/s

PROMAXcc® A30U-BF Quality A30U-BF A30U-BF A30U-BF A30U-BF A30U-BF A30U-BF A30U-BF A30U-BF A30U-BF Life time high

Article T011085 T011087 T012048 T012046 T012044

25 25 25 25 25 25

80 m/s Type 42 42 42 42 42 42 42 42

Article T001641 T001666 T001696 T001725 T001751 T001758 T001791 T001796

25 25 25 25 25 25 25 25

www.rottluff.com katalog_2009_Englisch.indd 15

15 16.07.09 14:10


Freehand cutting discs PROMAXcc® A36U-BF INOX Quality D x b x a (inch) A36U-BF INOX 4“ x 5/64“ x 5/8“ A36U-BF INOX 4½“ x 5/64“ x 7/8“ A36U-BF INOX 5“ x 5/64“ x 7/8“ A36U-BF INOX 6“ x 5/64“ x 7/8“ A36U-BF INOX 7“ x 5/64“ x 7/8“ A36U-BF INOX 9“ x 5/64“ x 7/8“ Life time Cutting speed high very good

D x b x a (mm) 100 x 2,0 x 16,0 115 x 2,0 x 22,23 125 x 2,0 x 22,23 150 x 2,0 x 22,23 180 x 2,0 x 22,23 230 x 2,0 x 22,23 Substance of content Fe, S and Cl (<0,1%)

Type 41 41 41 41 41 41

80 m/s

Article T001635 T001657 T001687 T001716 T001743 T001782

PROMAXcc® ZA24R-BF Quality D x b x a (inch) ZA24R-BF 5“ x 3/32“ x 5/8“ ZA24R-BF 4½“ x 3/32“ x 7/8“ ZA24R-BF 5“ x 3/32“ x 7/8“ ZA24R-BF 6“ x 1/8“ x 7/8“ ZA24R-BF 7“ x 1/8“ x 7/8“ ZA24R-BF 9“ x 3/32“ x 7/8“ ZA24R-BF 230 x 3,2 x 22,23 Life time Cutting speed medium good

D x b x a (mm) Type 100 x 2,5 x 16,0 41 115 x 2,5 x 22,23 41 125 x 2,5 x 22,23 41 150 x 3,0 x 22,23 41 180 x 3,2 x 22,23 41 230 x 2,5 x 22,23 41 230 x 3,2 x 22,23 41 Substance of content Fe, S and Cl (<0,1%)

Article T001645 T001670 T001700 T001728 T001761 T001711 T001801

80 m/s Type 42 42 42 42 42 42 42

Article T001647 T001672 T001702 T001730 T001768 T001805 T001804

PROMAXcc® A36N-BF ALU Quality D x b x a (inch) A36N-BF ALU 4½“ x 3/32“ x 7/8“ A36N-BF ALU 5“ x 3/32“ x 7/8“ A36N-BF ALU 6“ x 3/32“ x 7/8“ A36N-BF ALU 7“ x 3/32“ x 7/8“ A36N-BF ALU 9“ x 3/32“ x 7/8“ Life time Cutting speed good high

D x b x a (mm) Type 115 x 2,5 x 22,23 41 125 x 2,5 x 22,23 41 150 x 2,5 x 22,23 41 180 x 2,5 x 22,23 41 230 x 2,5 x 22,23 41 Substance of content iron-free

Article T001664 T001694 T001723 T001755 T001789

D x b x a (inch) 4“ x 1/8“ x 5/8 4½“ x 1/8“ x 7/8“ 5“ x 1/8“ x 7/8“ 6“ x 1/8“ x 7/8“ 7“ x 1/8“ x 7/8“ 9“ x 1/8“ x 7/8“ 9“ x 1/8“ x 7/8“ Cutting speed good

D x b x a (mm) Type 100 x 3,0 x 16,0 41 115 x 3,0 x 22,23 41 125 x 3,0 x 22,23 41 150 x 3,0 x 22,23 41 180 x 3,0 x 22,23 41 230 x 3,0 x 22,23 41 230 x 3,4 x 22,23 Substance of content ferrous

Article T000636 T000660 T000686 T000707 T000728 T000750

Type 42 42 42 42 42

16 katalog_2009_Englisch.indd 16

D x b x a (inch) 4½“ x 5/64“ x 7/8“ 4½“ x 3/32“ x 7/8“ 5“ x 5/64“ x 7/8“ 5“ x 3/32“ x 7/8“ 6“ x 5/64“ x 7/8“ 6“ x 3/32“ x 7/8“ 7“ x 5/64“ x 7/8“ 7“ x 3/32“ x 7/8“ 9“ x 5/64“ x 7/8“ 9“ x 3/32“ x 7/8“ Cutting speed good

D x b x a (mm) Type 115 x 2,0 x 22,23 41 115 x 2,5 x 22,23 41 125 x 2,0 x 22,23 41 125 x 2,5 x 22,23 41 150 x 2,0 x 22,23 41 150 x 2,5 x 22,23 41 180 x 2,0 x 22,23 41 180 x 2,5 x 22,23 41 230 x 2,0 x 22,23 41 230 x 2,5 x 22,23 41 Substance of content ferrous

Article T000977 T000912 T000975 T000998 T001001 T001002 T000966 T001005 T000967 T000968

Article T001669 T001699 T001727 T001757 T002789

25 25 25 25 25

80 m/s

Type 42 42 42 42 42 42 42

PREMIUMFLEX® A36T-BF Quality A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF A36T-BF Life time medium

25 25 25 25 25 25 25

80 m/s

PREMIUMFLEX® A24R-BF Quality A24R-BF A24R-BF A24R-BF A24R-BF A24R-BF A24R-BF A24R-BF Life time medium

25 25 25 25 25 25

Article T000638 T000662 T000688 T000709 T000732 T000754 T002033

25 25 25 25 25 25 25

80 m/s Type 42 42 42 42 42 42 42 42 42 42

Article T000978 T000987 T000994 T000999 T001111 T000979 T001004 T000149 T001011 T000150

25 25 25 25 25 25 25 25 25 25

www.rottluff.com 16.07.09 14:10


Freehand cutting discs PREMIUMFLEX® A30/36V-BF Quality D x b x a (mm) A30/36V-BF 4“ x 1/8 x 5/8 A30/36V-BF 4½“ x 3/32“ x 7/8“ A30/36V-BF 4½“ x 1/8“ x 7/8“ A30/36V-BF 5“ x 3/32“ x 7/8“ A30/36V-BF 5“ x 1/8“ x 7/8“ A30/36V-BF 6“ x 1/8“ x 7/8“ A30/36V-BF 7“ x 3/32“ x 7/8“ A30/36V-BF 7“ x 1/8“ x 7/8“ A30/36V-BF 9“ x 3/32“ x 7/8“ A30/36V-BF 9“ x 1/8“ x 7/8“ Life time Cutting speed good good

D x b x a (mm) 100 x 3,0 x 16,0 115 x 2,5 x 22,23 115 x 3,0 x 22,23 125 x 2,5 x 22,23 125 x 3,0 x 22,23 150 x 3,0 x 22,23 180 x 2,5 x 22,23 180 x 3,0 x 22,23 230 x 2,5 x 22,23 230 x 3,0 x 22,23 Substance of content ferrous

Type

Article

41 41 41 41 41 41 41 41 41

T012012 T011012 T012014 T011014 T011016 T012018 T011018 T012020 T011020

80 m/s Type 42 42 42 42 42 42 42 42 42 42

PREMIUMFLEX® C30S-BF Quality C30S-BF C30S-BF C30S-BF C30S-BF C30S-BF C30S-BF C30S-BF Life time medium

D x b x a (mm) 4“ x 1/8 x 5/8 4½“ x 1/8“ x 7/8“ 5“ x 1/8“ x 7/8“ 6“ x 1/8“ x 7/8“ 7“ x 1/8“ x 7/8“ 9“ x 1/8“ x 7/8“ 9“ x 1/8“ x 7/8“ Cutting speed good

D x b x a (mm) Type 100 x 3,0 x 16,0 41 115 x 3,0 x 22,23 41 125 x 3,0 x 22,23 41 150 x 3,0 x 22,23 41 180 x 3,0 x 22,23 41 230 x 3,0 x 22,23 41 230 x 3,4 x 22,23 Substance of content ferrous

Article T000637 T000661 T000687 T000708 T000730 T000752

25 25 25 25 25 25 25 25 25 25

80 m/s Type 42 42 42 42 42 42 42

PREMIUMFLEX® AC24R-BF Quality D x b x a (inch) AC24R-BF 7“ x 1/8“ x 7/8“ AC24R-BF 9“ x 3/32“ x 7/8“ AC24R-BF 9“ x 1/8“ x 7/8“ Life time Cutting speed medium good

Article T011011 T012013 T011013 T012015 T011015 T011017 T012019 T011019 T012021 T011021

D x b x a (mm) Type Article Type 180 x 3,0 x 22,23 41 T011006 42 230 x 2,5 x 22,23 41 T000327 230 x 3,0 x 22,23 41 T011008 42 Substance of content ferrous; suitable for high frequency machines

Article T000639 T000664 T000689 T000710 T000734 T000756 T001034

S

25 25 25 25 25 25 25

80 m/s Article T011007 T011009

25 25 25

www.rottluff.com katalog_2009_Englisch.indd 17

17 16.07.09 14:11


Freehand cutting discs PROMAXcc® ZA30R-BF Quality D x b x a (inch) ZA30R-BF 12“ x 1/8“ x 7/8“ ZA30R-BF 12“ x 1/8“ x 1-1/4“,0 ZA30R-BF 14" x 5/32 x 7/8" ZA30R-BF 14" x 5/32 x 1" ZA30R-BF 16“ x 5/32“ x 1-1/4“ Other sizes are available on request. Life time Cutting speed high very good

D x b x a (mm) 300 x 3,5 x 22,23 300 x 3,5 x 32,0 350 x 4,0 x 22,23 350 x 4,0 x 25,4 400 x 4,0 x 32,0

Type 41 41 41 41 41

100 m/s

Article T006889 T004594 T003838 T003836 T005234

Substance of content ferrous

PROMAXcc® ZA30Q-BF Quality D x b x a (inch) ZA30Q-BF 12“ x 1/8“ x 51/64“ ZA30Q-BF 12“ x 1/8“ x 7/8“ ZA30Q-BF 12“ x 1/8“ x 1“ ZA30Q-BF 14" x 5/32 x 7/8" ZA30Q-BF 14" x 5/32 x 1" ZA30Q-BF 16“ x 5/32“ x 1“ Other sizes are available on request. Life time Cutting speed medium good

D x b x a (mm) 300 x 3,5 x 20,0 300 x 3,5 x 22,23 300 x 3,5 x 25,4 350 x 4,0 x 22,23 350 x 4,0 x 25,4 400 x 4,0 x 25,4

Type 41 41 41 41 41 41

100 m/s

Article T005689 T005889 T005229 T005828 T005809 T005230

D x b x a (mm) 300 x 3,5 x 22,23 300 x 3,5 x 25,4 300 x 4,0 x 20,0 300 x 4,0 x 22,23 300 x 4,0 x 25,4 350 x 4,0 x 20,0 350 x 4,0 x 22,23 350 x 4,0 x 25,4

Type 41 41 41 41 41 41 41 41

100 m/s

Article T010032 T010033 T010034 T010035 T010036 T010037 T010038 T010039

18 katalog_2009_Englisch.indd 18

25 25 25 10 10 10 10 10

Substance of content ferrous

PREMIUMFLEX® A24R-BF Quality D x b x a (inch) A24R-BF 12“ x 5/32“ x 51/64“ A24R-BF 12“ x 5/32“ x 7/8“ A24R-BF 12“ x 5/32“ x 1“ A24R-BF 14“ x 5/32“ x 51/64“ A24R-BF 14“ x 5/32“ x 7/8“ A24R-BF 14“ x 5/32“ x 1“ A24R-BF 16“ x 5/32“ x 51/64“ A24R-BF 16“ x 5/32“ x 7/8“ A24R-BF 16“ x 5/32“ x 1“ Other sizes are available on request. Life time Cutting speed medium good

25 25 25 10 10 10

Substance of content ferrous

PREMIUMFLEX® A30Q-BF Quality D x b x a (inch) A30Q-BF 12“ x 1/8“ x 7/8“ A30Q-BF 12“ x 1/8“ x 1“ A30Q-BF 12“ x 5/32“ x 51/64“ A30Q-BF 12“ x 5/32“ x 7/8“ A30Q-BF 12“ x 5/32“ x 1“ A30Q-BF 14“ x 5/32“ x 51/64“ A30Q-BF 14“ x 5/32“ x 7/8“ A30Q-BF 14“ x 5/32“ x 1“ Other sizes are available on request. Life time Cutting speed medium good

25 25 10 10 10

D x b x a (mm) 300 x 4,0 x 20,0 300 x 4,0 x 22,23 300 x 4,0 x 25,4 350 x 4,0 x 20,0 350 x 4,0 x 22,23 350 x 4,0 x 25,4 400 x 4,0 x 20,0 400 x 4,0 x 22,23 400 x 4,0 x 25,4

Type 41 41 41 41 41 41 41 41 41

100 m/s Article T010052 T010053 T010054 T010055 T010056 T010057 T004711 T002844 T004712

10 10 10 10 10 10 10 10 10

Substance of content ferrous

www.rottluff.com 16.07.09 14:11


Freehand cutting discs PREMIUMFLEX® AC24R-BF Quality D x b x a (mm) D x b x a (mm) AC24R-BF 12“ x 5/32“ x 51/64“ 300 x 4,0 x 20,0 AC24R-BF 12“ x 5/32“ x 7/8“ 300 x 4,0 x 22,23 AC24R-BF 14“ x 5/32“ x 51/64“ 350 x 4,0 x 20,0 AC24R-BF 14“ x 5/32“ x 1“ 350 x 4,0 x 25,4 AC24R-BF 16“ x 5/32“ x 51/64“ 400 x 4,0 x 20,0 Other sizes are available on request. Life time Cutting speed Substance of content medium good ferrous

Type 41 41 41 41 41

PREMIUMFLEX® C24R-BF Quality D x b x a (mm) D x b x a (mm) C24R-BF 12“ x 5/32“ x 51/64“ 300 x 4,0 x 20,0 C24R-BF 12“ x 5/32“ x 7/8“ 300 x 4,0 x 22,23 C24R-BF 12“ x 5/32“ x 1“ 300 x 4,0 x 25,4 C24R-BF 14“ x 5/32“ x 51/64“ 350 x 4,0 x 20,0 C24R-BF 14“ x 5/32“ x 7/8“ 350 x 4,0 x 22,23 C24R-BF 14“ x 5/32“ x 1“ 350 x 4,0 x 25,4 C24R-BF 16“ x 5/32“ x 1“ 400 x 4,0 x 25,4 Other sizes are available on request. Life time Cutting speed Substance of content medium good ferrous

Type 41 41 41 41 41 41 41

100 m/s Article T000788 T000793 T000816 T000826 T003037

S

25 25 10 10 10

100 m/s Article T010058 T010059 T010060 T010061 T010062 T010063 T000844

S

25 25 25 10 10 10 10

www.rottluff.com katalog_2009_Englisch.indd 19

19 16.07.09 14:11


Freehand grinding discs

most suitable

suitable

PROMAXcc

A24T-BF

PROMAXcc

A24/30T-BF

PROMAXcc

A36N-BF ALU

PROMAXcc

A24V-BF INOX

PROMAXcc

COOL JOBBER A24S-BF INOX

PREMIUMFLEX

A24/30P-BF

PREMIUMFLEX

A24/30S-BF

PREMIUMFLEX

A30R-BF

PREMIUMFLEX

A24/30Q-BF INOX

PREMIUMFLEX

A24P-BF INOX

PREMIUMFLEX

A24/30S-BF INOX

PREMIUMFLEX

C24N-BF

PREMIUMFLEX

AC24S-BF

PROMAXcc

C24R-BF

PROMAXcc

ZA24R-BF

PROMAXcc

ZA24P-BF

PREMIUMFLEX

A24M-BF

S

www.rottluff.com katalog_2009_Englisch.indd 20

16.07.09 14:11


Freehand grinding discs PROMAXcc® A24T-BF Quality A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF A24T-BF Life time very high

D x b x a (inch) 4“ x 5/32“ x 5/8“ 4½“ x 5/32“ x 7/8“ 4½“ x 3/16“ x 7/8“ 5“ x 5/32“ x 7/8“ 5“ x 3/16“ x 7/8“ 6“ x 5/32“ x 7/8“ 6“ x 3/16“ x 7/8“ 7“ x 5/32“ x 7/8“ 7“ x 3/16“ x 7/8“ 9“ x 5/32“ x 7/8“ 9“ x 3/16“ x 7/8“ Cutting speed high

D x b x a (mm) 100 x 4,0 x 16,0 115 x 4,0 x 22,23 115 x 4,8 x 22,23 125 x 4,0 x 22,23 125 x 4,8 x 22,23 150 x 4,0 x 22,23 150 x 4,8 x 22,23 180 x 4,0 x 22,23 180 x 4,8 x 22,23 230 x 4,0 x 22,23 230 x 4,8 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27 27 27 27 27

80 m/s

Article S001649 S001675 S001676 S001706 S001707 S001732 S001733 S001767 S001769 S001806 S001808

PROMAXcc® A24/30T-BF Quality D x b x a (inch) A24/30T-BF 4“ x 1/4“ x 5/8“ A24/30T-BF 4½“ x 1/4“ x 7/8“ A24/30T-BF 4½“ x 5/16“ x 7/8“ A24/30T-BF 5“ x 1/4“ x 7/8“ A24/30T-BF 5“ x 5/16“ x 7/8“ A24/30T-BF 6“ x 1/4“ x 7/8“ A24/30T-BF 6“ x 5/16“ x 7/8“ A24/30T-BF 7“ x 1/4“ x 7/8“ A24/30T-BF 7“ x 5/16“ x 7/8“ A24/30T-BF 9“ x 1/4“ x 7/8“ A24/30T-BF 9“ x 5/16“ x 7/8“ Life time Cutting speed very high high

D x b x a (mm) 100 x 7,0 x 16,0 115 x 7,0 x 22,23 115 x 8,0 x 22,23 125 x 7,0 x 22,23 125 x 8,0 x 22,23 150 x 7,0 x 22,23 150 x 8,0 x 22,23 180 x 7,0 x 22,23 180 x 8,0 x 22,23 230 x 7,0 x 22,23 230 x 8,0 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27 27 27 27 27

D x b x a (mm) 100 x 7,0 x 16,0 115 x 7,0 x 22,23 125 x 7,0 x 22,23 150 x 7,0 x 22,23 180 x 7,0 x 22,23 230 x 7,0 x 22,23 Substance of content iron-free

80 m/s

Article S001652 S001679 S001684 S001710 S001715 S001736 S001741 S001772 S001780 S001811 S001819

PROMAXcc® A36N-BF ALU Quality D x b x a (inch) A36N-BF ALU 4“ x 1/4“ x 5/8“ A36N-BF ALU 4½“ x 1/4“ x 7/8“ A36N-BF ALU 5“ x 1/4“ x 7/8“ A36N-BF ALU 6“ x 1/4“ x 7/8“ A36N-BF ALU 7“ x 1/4“ x 7/8“ A36N-BF ALU 9“ x 1/4“ x 7/8“ Life time Cutting speed good very good

25 25 25 25 25 25 25 25 25 25 25

Type 27 27 27 27 27 27

10 10 10 10 10 10 10 10 10 10 10

80 m/s Article S001650 S001677 S001708 S001734 S001770 S001809

10 10 10 10 10 10

www.rottluff.com katalog_2009_Englisch.indd 21

21 16.07.09 14:11


Freehand grinding discs PROMAXcc® A24V-BF INOX Quality D x b x a (inch) D x b x a (mm) A24V-BF INOX 4“ x 5/32“ x 5/8“ 100 x 4,0 x 16,0 A24V-BF INOX 4“ x 1/4“ x 5/8“ 100 x 7,0 x 16,0 A24V-BF INOX 4½“ x 5/32“ x 7/8“ 115 x 4,0 x 22,23 A24V-BF INOX 4½“ x 3/16“ x 7/8“ 115 x 4,8 x 22,23 A24V-BF INOX 4½“ x 1/4“ x 7/8“ 115 x 7,0 x 22,23 A24V-BF INOX 5“ x 5/32“ x 7/8“ 125 x 4,0 x 22,23 A24V-BF INOX 5“ x 3/16“ x 7/8“ 125 x 4,8 x 22,23 A24V-BF INOX 5“ x 1/4“ x 7/8“ 125 x 7,0 x 22,23 A24V-BF INOX 5“ x 5/16“ x 7/8“ 125 x 8,0 x 22,23 A24V-BF INOX 6“ x 5/32“ x 7/8“ 150 x 4,0 x 22,23 A24V-BF INOX 6“ x 3/16“ x 7/8“ 150 x 4,8 x 22,23 A24V-BF INOX 6“ x 1/4“ x 7/8“ 150 x 7,0 x 22,23 A24V-BF INOX 7“ x 5/32“ x 7/8“ 180 x 4,0 x 22,23 A24V-BF INOX 7“ x 3/16“ x 7/8“ 180 x 4,8 x 22,23 A24V-BF INOX 7“ x 1/4“ x 7/8“ 180 x 7,0 x 22,23 A24V-BF INOX 7“ x 5/16“ x 7/8“ 180 x 8,0 x 22,23 A24V-BF INOX 9“ x 5/32“ x 7/8“ 230 x 4,0 x 22,23 A24V-BF INOX 9“ x 3/16“ x 7/8“ 230 x 4,8 x 22,23 A24V-BF INOX 9“ x 1/4“ x 7/8“ 230 x 7,0 x 22,23 A24V-BF INOX 9“ x 5/16“ x 7/8“ 230 x 8,0 x 22,23 Life time Cutting speed Substance of content high high Fe, S and Cl (<0,1%)

Type 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

80 m/s Article S001321 S001651 S001674 S000032 S001678 S001705 S001718 S001709 S001714 S001521 S001790 S001735 S001766 S001768 S001771 S001779 S001805 S001807 S001810 S001818

PROMAXcc® COOL JOBBER A24S-BF INOX Quality A24S-BF INOX A24S-BF INOX A24S-BF INOX A24S-BF INOX Life time medium

D x b x a (mm) 4½“ x 1/8“ x 7/8“ 5“ x 1/8“ x 7/8“ 6“ x 1/8“ x 7/8“ 7“ x 1/8“ x 7/8“

Cutting speed very high

D x b x a (mm) 115 x 3,0 x 22,23 125 x 3,0 x 22,23 1 180 x 3,0 x 22,23

Type 27 27 27 27

22 katalog_2009_Englisch.indd 22

80 m/s Article S005674 S005705 S005706 S005766

25 25 25 25

Substance of content Fe, S and Cl (<0,1%)

PREMIUMFLEX® A24/30P-BF Quality D x b x a (inch) A24/30P-BF 4“ x 1/4“ x 5/8“ A24/30P-BF 4½“ x 1/4“ x 7/8“ A24/30P-BF 4½“ x 5/16“ x 7/8“ A24/30P-BF 5“ x 1/4“ x 7/8“ A24/30P-BF 5“ x 5/16“ x 7/8“ A24/30P-BF 6“ x 1/4“ x 7/8“ A24/30P-BF 6“ x 5/16“ x 7/8“ A24/30P-BF 7“ x 1/4“ x 7/8“ A24/30P-BF 7“ x 5/16“ x 7/8“ A24/30P-BF 7“ x 3/8“ x 7/8“ A24/30P-BF 9“ x 1/4“ x 7/8“ A24/30P-BF 9“ x 5/16“ x 7/8“ A24/30P-BF 9“ x 3/8“ x 7/8“ Life time Cutting speed medium high

25 10 25 25 10 25 25 10 10 25 25 10 25 25 10 10 25 25 10 10

D x b x a (mm) 100 x 6,0 x 16,0 115 x 6,0 x 22,23 115 x 8,0 x 22,23 125 x 6,0 x 22,23 125 x 8,0 x 22,23 150 x 6,0 x 22,23 150 x 8,0 x 22,23 180 x 6,5 x 22,23 180 x 8,0 x 22,23 180 x 10,0 x 22,23 230 x 6,5 x 22,23 230 x 8,0 x 22,23 230 x 10,0 x 22,23 Substance of content iron-free

Type 27 27 27 27 27 27 27 27 27 27 27 27 27

80 m/s Article S000985 S000992 S000511 S000999 S001125 S003712 S004712 S001009 S000741 S000929 S001017 S000768 S000930

10 10 10 10 10 10 10 10 10 10 10 10 10

www.rottluff.com 16.07.09 14:11


Freehand grinding discs PREMIUMFLEX® A24/30S-BF Quality D x b x a (inch) A24/30S-BF 100 x 4,8 x 16,0 A24/30S-BF 4“ x 1/4“ x 5/8“ A24/30S-BF 4½“ x 3/16“ x 7/8“ A24/30S-BF 4½“ x 1/4“ x 7/8“ A24/30S-BF 4½“ x 5/16“ x 7/8“ A24/30S-BF 5“ x 5/32“ x 7/8“ A24/30S-BF 5“ x 3/16“ x 7/8“ A24/30S-BF 5“ x 1/4“ x 7/8“ A24/30S-BF 5“ x 5/16“ x 7/8“ A24/30S-BF 6“ x 5/32“ x 7/8“ A24/30S-BF 6“ x 3/16“ x 7/8“ A24/30S-BF 6“ x 1/4“ x 7/8“ A24/30S-BF 6“ x 5/16“ x 7/8“ A24/30S-BF 7“ x 1/4“ x 7/8“ A24/30S-BF 7“ x 5/16“ x 7/8“ A24/30S-BF 9“ x 1/4“ x 7/8“ A24/30S-BF 9“ x 5/16“ x 7/8“ A24/30S-BF 9“ x 3/8“ x 7/8“ Life time Cutting speed high good

D x b x a (mm) 100 x 4,8 x 16,0 100 x 6,0 x 16,0 115 x 4,8 x 22,23 115 x 6,0 x 22,23 115 x 8,0 x 22,23 125 x 4,0 x 22,23 125 x 4,8 x 22,23 125 x 6,0 x 22,23 125 x 8,0 x 22,23 150 x 4,0 x 22,23 150 x 4,8 x 22,23 150 x 6,0 x 22,23 150 x 8,0 x 22,23 180 x 6,5 x 22,23 180 x 8,0 x 22,23 230 x 6,5 x 22,23 230 x 8,0 x 22,23 230 x 10,0 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27

80 m/s Article S000641 S000642 S000666 S000667 S000669 S000690 S000691 S000692 S000696 S002920 S002921 S000712 S000713 S000737 S000740 S000762 S000767 S000932

PREMIUMFLEX® A30R-BF Quality A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF A30R-BF Life time high

D x b x a (inch) 4“ x 1/4“ x 5/8“ 4½“ x 1/4“ x 7/8“ 4½“ x 5/16“ x 7/8“ 5“ x 1/4“ x 7/8“ 5“ x 5/16“ x 7/8“ 6“ x 1/4“ x 7/8“ 6“ x 5/16“ x 7/8“ 7“ x 1/4“ x 7/8“ 7“ x 5/16“ x 7/8“ 9“ x 1/4“ x 7/8“ 9“ x 5/16“ x 7/8“ Cutting speed good

D x b x a (mm) 100 x 6,0 x 16,0 115 x 6,0 x 22,23 115 x 8,0 x 22,23 125 x 6,0 x 22,23 125 x 8,0 x 22,23 150 x 6,0 x 22,23 150 x 8,0 x 22,23 180 x 6,5 x 22,23 180 x 8,0 x 22,23 230 x 6,5 x 22,23 230 x 8,0 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27 27 27 27 27

80 m/s

Article S000689 S000688 S000699 S000686 S000687 S002712 S000698 S000832 S000957 S000833 S000836

PREMIUMFLEX® A24/30Q-BF INOX Quality D x b x a (inch) D x b x a (mm) A24/30Q-BF INOX 4“ x 1/4“ x 5/8“ 100 x 6,0 x 16,0 A24/30Q-BF INOX 4½“ x 1/4“ x 7/8“ 115 x 6,0 x 22,23 A24/30Q-BF INOX 5“ x 1/4“ x 7/8“ 125 x 6,0 x 22,23 A24/30Q-BF INOX 6“ x 1/4“ x 7/8“ 150 x 6,0 x 22,23 A24/30Q-BF INOX 7“ x 1/4“ x 7/8“ 180 x 6,8 x 22,23 A24/30Q-BF INOX 7“ x 5/16“ x 7/8“ 180 x 8,0 x 22,23 A24/30Q-BF INOX 7“ x 3/8“ x 7/8“ 180 x 10,0 x 22,23 A24/30Q-BF INOX 9“ x 1/4“ x 7/8“ 230 x 6,8 x 22,23 A24/30Q-BF INOX 9“ x 5/16“ x 7/8“ 230 x 8,0 x 22,23 A24/30Q-BF INOX 9“ x 3/8“ x 7/8“ 230 x 10,0 x 22,23 Life time Cutting speed Substance of content medium good Fe, S and Cl (<0,1%)

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Type 27 27 27 27 27 27 27 27 27 27

10 10 10 10 10 10 10 10 10 10 10

80 m/s Article S001601 S001893 S001603 S001604 S001605 S001606 S001607 S001611 S001612 S001613

10 10 10 10 10 10 10 10 10 10

www.rottluff.com katalog_2009_Englisch.indd 23

23 16.07.09 14:11


Freehand grinding discs PREMIUMFLEX® A24P-BF INOX Quality D x b x a (mm) A24P-BF INOX 4½“ x 1/4“ x 7/8“ A24P-BF INOX 5“ x 1/4“ x 7/8“ A24P-BF INOX 6“ x 1/4“ x 7/8“ A24P-BF INOX 7“ x 1/4“ x 7/8“ A24P-BF INOX 9“ x 1/4“ x 7/8“ Life time Cutting speed medium very good

D x b x a (mm) 115 x 6,0 x 22,23 125 x 6,0 x 22,23 150 x 6,0 x 22,23 180 x 6,5 x 22,23 230 x 6,5 x 22,23 Substance of content Fe, S and Cl (<0,1%)

80 m/s

Type 27 27 27 27 27

Article S000668 S000694 S000101 S000738 S000763

PREMIUMFLEX® A24/30S-BF INOX Quality D x b x a (mm) D x b x a (mm) A24/30S-BF INOX 4“ x 1/4“ x 5/8“ 100 x 6,0 x 16,0 A24/30S-BF INOX 4½“ x 5/32“ x 7/8“ 115 x 4,0 x 22,23 A24/30S-BF INOX 4½“ x 1/4“ x 7/8“ 115 x 6,4 x 22,23 A24/30S-BF INOX 5“ x 5/32“ x 7/8“ 125 x 4,0 x 22,23 A24/30S-BF INOX 5“ x 1/4“ x 7/8“ 125 x 6,4 x 22,23 A24/30S-BF INOX 6“ x 1/4“ x 7/8“ 150 x 6,4 x 22,23 A24/30S-BF INOX 7“ x 1/4“ x 7/8“ 180 x 6,4 x 22,23 A24/30S-BF INOX 7“ x 5/16“ x 7/8“ 180 x 8,0 x 22,23 A24/30S-BF INOX 9“ x 1/4“ x 5/8“ 230 x 6,4 x 22,23 A24/30S-BF INOX 9“ x 5/16“ x 7/8“ 230 x 8,0 x 22,23 Life time Cutting speed Substance of content high medium Fe, S and Cl (<0,1%)

Type 27 27 27 27 27 27 27 27 27 27

80 m/s Article S002037 S003105 S000105 S003106 S000106 S000107 S000108 S002108 S000109 S003109

PREMIUMFLEX® C24N-BF Quality D x b x a (inch) C24N-BF 4“ x 1/4“ x 5/8“ C24N-BF 4½“ x 1/4“ x 7/8“ C24N-BF 5“ x 1/4“ x 7/8“ C24N-BF 6“ x 1/4“ x 7/8“ C24N-BF 7“ x 1/4“ x 7/8“ C24N-BF 7“ x 5/16“ x 7/8“ C24N-BF 9“ x 1/4“ x 7/8“ C24N-BF 9“ x 5/16“ x 7/8“ Life time Cutting speed medium good

D x b x a (mm) 100 x 6,0 x 16,0 115 x 6,0 x 22,23 125 x 6,0 x 22,23 150 x 6,0 x 22,23 180 x 6,8 x 22,23 180 x 8,0 x 22,23 230 x 6,8 x 22,23 230 x 8,0 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27 27

PREMIUMFLEX® AC24S-BF Quality D x b x a (inch) AC24S-BF 7“ x 1/4“ x 7/8“ AC24S-BF 7“ x 5/16“ x 7/8“ AC24S-BF 9“ x 1/4“ x 7/8“ AC24S-BF 9“ x 5/16“ x 7/8“ Life time Cutting speed high good

24 katalog_2009_Englisch.indd 24

D x b x a (mm) 180 x 6,8 x 22,23 180 x 8,0 x 22,23 230 x 6,8 x 22,23 230 x 8,0 x 22,23 Substance of content ferrous

Type 27 27 27 27

10 10 10 10 10

10 10 10 10 10 10 10 10 10 10

80 m/s Article S001614 S001617 S001618 S001622 S001623 S001624 S001625 S001688

S

10 10 10 10 10 10 10 10

80 m/s Article S001597 S001598 S001599 S001600

S

10 10 10 10

www.rottluff.com 16.07.09 14:11


Freehand grinding discs PROMAXcc® C24R-BF Quality D x b x a (inch) C24R-BF 7“ x 1/4“ x 7/8“ C24R-BF 9“ x 1/4“ x 7/8“ Life time Cutting speed high very good

D x b x a (mm) 180 x 7,0 x 22,23 230 x 7,0 x 22,23 Substance of content ferrous

Type 27 27

80 m/s

Article S000320 S000325

PROMAXcc® ZA24R-BF Quality D x b x a (inch) ZA24R-BF 4½“ x 1/4“ x 7/8“ ZA24R-BF 5“ x 1/4“ x 7/8“ ZA24R-BF 6“ x 1/4“ x 7/8“ ZA24R-BF 7“ x 1/4“ x 7/8“ ZA24R-BF 7“ x 5/16“ x 7/8“ ZA24R-BF 9“ x 1/4“ x 7/8“ ZA24R-BF 9“ x 5/16“ x 7/8“ Life time Cutting speed very high high

D x b x a (mm) 115 x 7,0 x 22,23 125 x 7,0 x 22,23 150 x 7,0 x 22,23 180 x 7,0 x 22,23 180 x 8,0 x 22,23 230 x 7,0 x 22,23 230 x 8,0 x 22,23 Substance of content ferrous

Type 27 27 27 27 27 27 27

D x b x a (mm) 180 x 7,0 x 22,23 230 x 7,5 x 22,23 Substance of content ferrous

Type 27 27

Article S001680 S001711 S001737 S001773 S001701 S001812 S003812

D x b x a (mm) 180 x 8,0 x 22,23 180 x 10,0 x 22,23 230 x 6,8 x 22,23 230 x 8,0 x 22,23 230 x 10,0 x 22,23 Substance of content ferrous

10 10 10 10 10 10 10

80 m/s

Article S003798 S005875

PREMIUMFLEX® A24M-BF Quality D x b x a (inch) A24M-BF 7“ x 5/16“ x 7/8“ A24M-BF 7“ x 3/8“ x 7/8“ A24M-BF 9“ x 1/4“ x 7/8“ A24M-BF 9“ x 5/16“ x 7/8“ A24M-BF 9“ x 3/8“ x 7/8“ Life time Cutting speed medium very high

10 10

80 m/s

PROMAXcc® BEST CUT ZA24P-BFS Quality D x b x a (inch) ZA24P-BF 7“ x 1/4“ x 7/8“ ZA24P-BF 9“ x 19/54“ x 7/8“ Life time Cutting speed high very high

Type 27 27 27 27 27

S

10 10

80 m/s Article S002949 S000490 S003799 S003599 S003699

10 10 10 10 10

www.rottluff.com katalog_2009_Englisch.indd 25

25 16.07.09 14:11


Stationary cutting discs

most suitable

suitable

PREMIUMFLEX

A24N-BF

PREMIUMFLEX

A30T-BF

PREMIUMFLEX

A36S-BF

PREMIUMFLEX

A30S-BF INOX

www.rottluff.com katalog_2009_Englisch.indd 26

16.07.09 14:11


Stationary cutting discs PREMIUMFLEX® A24N-BF Quality A24N-BF A24N-BF A24N-BF A24N-BF A24N-BF A24N-BF Life time medium

D x b x a (inch) 12“ x 5/32“ x 7/8“ 12“ x 1/8“ x 1“ 14“ x 5/32“ x 7/8“ 14“ x 5/32“ x 1“ 16“ x 5/32“ x 7/8“ 16“ x 5/32“ x 1“ Cutting speed very good

D x b x a (mm) 300 x 4,0 x 22,23 300 x 3,8 x 25,4 350 x 4,4 x 22,23 350 x 4,4 x 25,4 400 x 4,5 x 22,23 400 x 4,5 x 25,4 Substance of content ferrous

Type 41 41 41 41 41 41

Article T003389 T003386 T003390 T003387 T003393 T002442

PREMIUMFLEX® A30T-BF Quality D x b x a (inch) A30T-BF 12“ x 1/8“ x 7/8“ A30T-BF 12“ x 1/8“ x 1“ A30T-BF 12“ x 1/8“ x 1-1/4“ A30T-BF 12“ x 1/8“ x 1-1/2“ A30T-BF 14“ x 1/8“ x 1“ A30T-BF 14“ x 1/8“ x 1-1/4“ A30T-BF 14“ x 1/8“ x 1-1/2“ A30T-BF 16“ x 5/32“ x 1“ A30T-BF 16“ x 5/32“ x 1-1/4“ A30T-BF 16“ x 5/32“ x 1-1/2“ Other sizes are available on request. Life time Cutting speed high good

D x b x a (mm) 300 x 3,5 x 22,23 300 x 3,5 x 25,4 300 x 3,5 x 32,0 300 x 3,5 x 40,0 350 x 3,5 x 25,4 350 x 3,5 x 32,0 350 x 3,5 x 40,0 400 x 4,0 x 25,4 400 x 4,0 x 32,0 400 x 4,0 x 40,0

80 m/s

Type 41 41 41 41 41 41 41 41 41 41

25 25 10 10 10 10

100 m/s Article T001774 T001776 T010020 T010021 T010022 T010023 T010024 T010025 T010026 T010027

Substance of content ferrous

PREMIUMFLEX® A36S-BF Quality D x b x a (inch) A36S-BF 12“ x 3/32“ x 1“ A36S-BF 14“ x 3/32“ x 1“ A36S-BF 16“ x 1/8“ x 1“ Other sizes are available on request. Life time Cutting speed high good

25 25 25 25 10 10 10 10 10 10

D x b x a (mm) 300 x 2,6 x 25,4 350 x 2,6 x 25,4 400 x 3,2 x 25,4

Type 41 41 41

80 m/s Article T010028 T010029 T010030

25 10 10

Substance of content ferrous

PREMIUMFLEX® A30S-BF INOX 80 / 100 m/s Quality D x b x a (inch) D x b x a (mm) A30S-BF INOX 12“ x 3/32“ x 1“ 300 x 2,6 x 25,4 A30S-BF INOX 12“ x 1/8“ x 1“ 300 x 3,5 x 25,4 A30S-BF INOX 12“ x 1/8“ x 1-1/4“ 300 x 3,5 x 32,0 A30S-BF INOX 12“ x 1/8“ x 1-1/2“ 300 x 3,5 x 40,0 A30S-BF INOX 12“ x 1/8“ x 1“ 300 x 3,8 x 25,4 A30S-BF INOX 12“ x 1/8“ x 1-1/4“ 300 x 3,8 x 32,0 A30S-BF INOX 12“ x 1/8“ x 1-1/2“ 300 x 3,8 x 40,0 A30S-BF INOX 14“ x 3/32“ x 1“ 350 x 2,6 x 25,4 A30S-BF INOX 14“ x 1/8“ x 1“ 350 x 3,2 x 25,4 A30S-BF INOX 14“ x 1/8“ x 1“ 350 x 3,5 x 25,4 A30S-BF INOX 14“ x 1/8“ x 1-1/4“ 350 x 3,5 x 32,0 A30S-BF INOX 14“ x 1/8“ x 1-1/2“ 350 x 3,5 x 40,0 A30S-BF INOX 16“ x 1/8“ x 1“ 400 x 3,2 x 25,4 A30S-BF INOX 16“ x 5/32“ x 1“ 400 x 4,0 x 25,4 A30S-BF INOX 16“ x 5/32“ x 1-1/4“ 400 x 4,0 x 32,0 A30S-BF INOX 16“ x 5/32“ x 1-1/2“ 400 x 4,0 x 40,0 A30S-BF INOX 20“ x 13/64“ x 1“ 500 x 5,0 x 25,4 A30S-BF INOX 20“ x 13/64“ x 1-1/4“ 500 x 5,0 x 32,0 A30S-BF INOX 20“ x 13/64“ x 1-1/2“ 500 x 5,0 x 40,0 Life time Cutting speed Substance of content medium very good Fe, S and Cl (<0,1%)

Type 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41

Article T010001 T010002 T010003 T010004 T010005 T010006 T010007 T010008 T010009 T010010 T010011 T010012 T010013 T010014 T010015 T010016 T010017 T010018 T010019

25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10

www.rottluff.com katalog_2009_Englisch.indd 27

27 16.07.09 14:11


Coated abrasives

Others

Fibre discs

Flap discs

most suitable

suitable

S

PROMAXcc

COOL JOBBER Zirconia alumina

PROMAXcc

Tough Jobber Zirconia alumina

PREMIUMFLEX

Zirconia alumina

PREMIUMFLEX

Aluminium oxide

PROMAXcc

Soft Touch

PROMAXcc

Easy Touch

PREMIUMFLEX

Semi flexible discs

PREMIUMFLEX

Fibre discs Aluminium oxide

PREMIUMFLEX

Fibre discs INOX

PREMIUMFLEX

Fibre discs Silicon carbide

PREMIUMFLEX

Fibre discs Zirconia alumina

PREMIUMFLEX

Rubber pad

PREMIUMFLEX

Unmounted flap wheels

PREMIUMFLEX

Mounted flap wheels

PREMIUMFLEX

Mounted wheels with fleece

PREMIUMFLEX

Mounted wheels with fleece in combination with abrasive cloth

PREMIUMFLEX

Strip & Clean on a backing pad

PREMIUMFLEX

Strip & Clean with adapter

www.rottluff.com katalog_2009_Englisch.indd 28

16.07.09 14:11


Structure and components

Commercial Rottluff disc

Flaps

Glue

Fibre backing

Application

80m/s = (red) max. operating speed

Safety and operation instructions

Diameter x Hole Barcode Grit Manufactured according to EN 13743

www.rottluff.com katalog_2009_Englisch.indd 29

29 16.07.09 14:11


Coated abrasives PROMAXcc® COOL JOBBER Zirconia alumina Quality ZK40 ZK40

D x a (inch) 4½“ x 7/8 5“ x 7/8

ZK60 ZK60 Life time high

4½“ x 7/8 5“ x 7/8 Cutting speed very high

D x a (mm) 115 x 22,23 125 x 22,23 115 x 22,23 125 x 22,23 Substance of content Fe, S and Cl (<0,1%)

80 m/s

Type 29 29

Article H008002 H008010

10 10

29 29

H008004 H008012

10 10

PROMAXcc® TOUGH JOBBER Zirconia alumina

80 m/s

Quality ZK40 ZK40

D x a (inch) 4½“ x 7/8 5“ x 7/8

D x a (mm) 115 x 22,23 125 x 22,23

Type 27 27

Article H007001 H007009

Type 29 29

Article H007002 H007010

10 10

ZK60 ZK60

4½“ x 7/8 5“ x 7/8

115 x 22,23 125 x 22,23

27 27

H007003 H007011

29 29

H007004 H007012

10 10

ZK80 ZK80

4½“ x 7/8 5“ x 7/8

115 x 22,23 125 x 22,23

27 27

H007005 H007013

29 29

H007006 H007014

10 10

4½“ x 7/8 115 x 22,23 27 H007007 5“ x 7/8 125 x 22,23 27 H007015 Cutting speed Substance of content very high Fe, S and Cl (<0,1%)

29 29

H007008 H007016

10 10

ZK120 ZK120 Life time high

PREMIUMFLEX® Zirconia alumina

80 m/s

Quality ZK24 ZK24 ZK24

D x a (inch) 4½“ x 7/8 5“ x 7/8 7“ x 7/8

D x a (mm) 115 x 22,23 125 x 22,23 180 x 22,23

Type 27 27 27

Article H003179 H000194 H000482

Type 29 29 29

Article H000179 H000193 H000450

10 10 10

ZK40 ZK40 ZK40

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000183 H000198 H000208

29 29 29

H000182 H000197 H000207

10 10 10

ZK60 ZK60 ZK60

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000186 H000200 H000210

29 29 29

H000185 H000199 H000209

10 10 10

ZK80 ZK80 ZK80

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000188 H000202 H000212

29 29 29

H000187 H000201 H000211

10 10 10

115 x 22,23 27 H000192 125 x 22,23 27 H000206 180 x 22,23 27 H000216 Substance of content Fe, S and Cl (<0,1%)

29 29 29

H000191 H000205 H000215

10 10 10

ZK120 ZK120 ZK120 Life time good

4½“ x 7/8 5“ x 7/8 7“ x 7/8 Cutting speed good

D Type 27

30 katalog_2009_Englisch.indd 30

Type 29

a Dimension

b

www.rottluff.com 16.07.09 14:12


Coated abrasives PREMIUMFLEX® Aluminium oxide

80 m/s

Quality

D x a (inch)

D x a (mm)

Type

Article

Type

Article

A40 A40 A40

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000133 H000147 H000157

29 29 29

H000132 H000146 H000156

10 10 10

A60 A60 A60

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000137 H000149 H000159

29 29 29

H000136 H000148 H000158

10 10 10

A80 A80 A80

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

27 27 27

H000139 H000151 H000161

29 29 29

H000138 H000150 H000160

10 10 10

4½“ x 7/8 115 x 22,23 27 H000143 5“ x 7/8 125 x 22,23 27 H000155 7“ x 7/8 180 x 22,23 27 H000165 Cutting speed Substance of content good ferrous

29 29 29

H000142 H000154 H000164

10 10 10

A120 A120 A120 Life time good

PROMAXcc® SOFT TOUCH Quality

coarse meduim fine coarse medium fine Life time good

D x a (inch)

D x a (mm)

4½“ x 7/8 4½“ x 7/8 4½“ x 7/8 5“ x 7/8 5“ x 7/8 5“ x 7/8 Cutting speed good

115 x 22,23 115 x 22,23 115 x 22,23 125 x 22,23 125 x 22,23 125 x 22,23 Substance of content Fe, S and Cl (<0,1%)

Type

Article

29 29 29 29 29 29

H001323 H001324 H001325 H001326 H001327 H001328

PROMAXcc® EASY TOUCH Quality

fine fine Life time good

D x a (inch)

D x a (mm)

4½“ x 7/8 5“ x 7/8 Cutting speed good

115 x 22,23 125 x 22,23 Substance of content Fe, S and Cl (<0,1%)

Type

Article

29 29

H001344 H001345

PREMIUMFLEX® semi flexible discs D x a (inch) D x a (mm)

4½“ x 7/8 5“ x 7/8 7“ x 7/8

80 m/s 10 10 10 10 10 10

80 m/s 10 10

80 m/s

S

Quality Article Quality Article Quality Article Quality Article Quality Article

115 x 22,23 A24 M000125 A36 M000126 A60 M001127 A80 M000182 A120 M001128 5 125 x 22,23 A24 M001136 A36 M001137 A60 M000134 A80 M001139 A120 M001140 5 180 x 22,23 A24 M000138 A36 M000139 A60 M000140 A80 M001153 A120 M001154 5

4½“ x 7/8 115 x 22,23 C24 M000127 C36 M000128 C60 M000131 C80 M000132 C120 M000133 5 5“ x 7/8 125 x 22,23 C24 M000135 C36 M000136 C60 M000137 C80 M001146 C120 M001147 5 7“ x 7/8 180 x 22,23 C24 M000142 C36 M000144 C60 M000146 C80 M000147 C120 M000149 5 Applicable only in connection with a rubber pad; Minimum order quantity: 100 pieces / grit. Life time Cutting speed Substance of content good

good

ferrous D Type 27

Type 29

a Dimension

www.rottluff.com katalog_2009_Englisch.indd 31

b

31 16.07.09 14:12


Coated abrasives PREMIUMFLEX® Fibre discs aluminium oxide Type Quality Article

80 m/s

D x a (inch)

D x a (mm)

Quality Article

Quality Article

Quality Article

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

A16 A16 A16 A16

F000300 F000319 F000371 F000330

A24 A24 A24 A24

F000301 F000320 F000372 F000331

A30 A30 A30 A30

F000302 F000321 F000373 F000332

A36 A36 A36 A36

F000303 F000322 F000374 F000333

25 25 25 25

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

A40 A40 A40 A40

F000304 F000323 F000375 F000334

A50 A50 A50 A50

F000306 F000325 F000377 F000336

A60 A60 A60 A60

F000307 F000326 F000378 F000337

A80 A80 A80 A80

F000308 F000327 F000379 F000338

25 25 25 25

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

A100 A100 A100 A100

F000309 F000328 F000380 F000339

A120 A120 A120 A120

F000310 F000329 F000381 F000340

A150 A150 A150 A150

F000386 F000390 F000382 F000393

S1

25 25 25 25

Applicable only in connection with a rubber pad; Other sizes are available on request.; Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

Cutting speed good

Substance of content ferrous

PREMIUMFLEX® Fibre discs INOX D x a (inch)

D x a (mm)

4½“ x 7/8

115 x 22,23

Type Quality

S0

A60

80 m/s

Article

Quality

Article

F000672

A80

F000673

25

Applicable only in connection with a rubber pad; All fibre discs with round hole. Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

Cutting speed good

Substance of content Fe, S and Cl (<0,1%)

D x a (inch)

D x a (mm)

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

Type Quality Article

S1 A36 S1 A36 S1 A36

4½“ x 7/8 5“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 180 x 22,23

S1 A100 F000407 S1 A100 F000418 S1

F000403 F000413 F000424

Quality Article

A50 A50 A50

S0 Quality Article Quality Article

F000404 A60 F000415 A60 F000425 A60

F000405 A80 F000416 A80 F000426 A80

F000406 F000417 F000427

25 25 25

A120 F000408 A150 F000409 A180 F000410 A120 F000419 A150 F000420 A180 F000412 A120 F000428 A150 F000440 A180 F000441

25 25 25

S1

Applicable only in connection with a rubber pad; Other sizes are available on request.; Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

Cutting speed good

Substance of content Fe, S and Cl (<0,1%)

PREMIUMFLEX® Fibre discs silicon carbide

80 m/s

D x a (inch)

D x a (mm)

Type Quality Article

Quality Article

Quality Article Quality Article

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

C16 C16 C16 C16

F000312 F000464 F000363 F000348

C24 C24 C24 C24

F000311 F000463 F000364 F000341

C36 C36 C36 C36

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

C60 C60 C60 C60

F000316 F000467 F000368 F000344

C80 C80 C80 C80

F000318 F000468 F000369 C100 F000370 F000345 C100 F000346

F000313 F000465 F000365 F000342

C50 C50 C50 C50

F000314 F000466 F000366 F000343

25 25 25 25

C120 C120 C120 C120

F000315 F000470 F000367 F000347

25 25 25 25

Applicable only in connection with a rubber pad; Other sizes are available on request.; Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

32 katalog_2009_Englisch.indd 32

Cutting speed good

Substance of content ferrous

S

S1 D a Dimension

b

www.rottluff.com 16.07.09 14:12


Coated abrasives PREMIUMFLEX® Fibre discs zirconia alumina D x a (inch)

D x a (mm)

4½“ x 7/8 7“ x 7/8

115 x 22,23 180 x 22,23

Type Quality

S0 S0

ZK36 ZK36

Article

Quality

Article

F000831 ZK60 F001027 ZK60

80 m/s Quality

Article

F000834 ZK120 F000587 ZK120

F000837 F000588

25 25

Applicable only in connection with a rubber pad; All fibre discs with round hole. Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

Cutting speed good

S0

Substance of content Fe, S and Cl (<0,1%)

D x a (inch)

D x a (mm)

Quality Article

Quality Article

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

Type Quality Article Quality Article

S1 S1 S1 S1

ZK24 ZK24 ZK24 ZK24

F000550 F000558 F000574 F000566

ZK36 ZK36 ZK36 ZK36

F000551 F000548 F000575 F000567

ZK40 ZK40 ZK40 ZK40

F000552 F000559 F000576 F000568

ZK50 ZK50 ZK50 ZK50

F000553 F000560 F000577 F000569

25 25 25 25

4½“ x 7/8 5“ x 7/8 6“ x 7/8 7“ x 7/8

115 x 22,23 125 x 22,23 150 x 22,23 180 x 22,23

S1 S1 S1 S1

ZK60 ZK60 ZK60 ZK60

F000554 ZK80 F000561 ZK80 ZK F000578 ZK80 F000570 ZK80

F000555 F000562 F000579 F000571

ZK100 ZK100 ZK100 ZK100

F000556 F000563 F000580 F000572

ZK120 ZK120 ZK120 ZK120

F000557 F000564 F002574 F000573

25 25 25 25

S1

Applicable only in connection with a rubber pad; Other sizes are available on request.; Minimum order quantity: 5,000 pieces / grit and diameter. Life time good

Cutting speed good

Substance of content Fe, S and Cl (<0,1%)

PREMIUMFLEX® Rubber pad D x a (inch)

D x a (mm)

Back side

4“ x M10 100 mm x M10 without velcro ® 4“ x M14 100 mm x M14 without velcro ® 4½“ x M14 115 mm x M14 without velcro ® 5“ x M14 125 mm x M14 without velcro ® 6“ x M14 150 mm x M14 without velcro ® 7“ x M14 175 mm x M14 without velcro ® To be used with fibre discs and semi flexible discs.

80 m/s

Article

Rückseite

Article

M000041 M000046 M000043 M000044 M000042 M000045

with velcro ® with velcro ® with velcro ® with velcro ® with velcro ® with velcro ®

M000218 M000031 M000033 M000034 M000032 M000035

PREMIUMFLEX® Unmounted flap wheels D x b x a (inch)

D x b x a (mm)

Quality

6“ x 1-3/16“ x 2-1/8“ 6“ x 2“ x 2-1/8“ 6-1/2“ x 3-1/16“ x 2-1/8“ 6-1/2“ x 2“ x 2-1/8“ 8“ x 3-1/16“ x 2-1/8“ 8“ x 2“ x 2-1/8“

150 x 30 x 54 150 x 50 x 54 165 x 30 x 54 165 x 50 x 54 200 x 30 x 54 200 x 50 x 54

A40 A40 A40 A40 A40 A40

Article

H001971 H001976 H001981 H001986 H001991 H001996

Quality

A60 A60 A60 A60 A60 A60

6“ x 1-3/16“ x 2-1/8“ 150 x 30 x 54 A120 H001974 A180 6“ x 2“ x 2-1/8“ 150 x 50 x 54 A120 H001979 A180 6-1/2“ x 3-1/16“ x 2-1/8“ 165 x 30 x 54 A120 H001984 A180 6-1/2“ x 2“ x 2-1/8“ 165 x 50 x 54 A120 H001989 A180 8“ x 3-1/16“ x 2-1/8“ 200 x 30 x 54 A120 H001994 A180 8“ x 2“ x 2-1/8“ 200 x 50 x 54 A120 H001999 A180 Life time Cutting speed Substance of content good

good

Article

H001972 H001977 H001982 H001987 H001992 H001997 H001975 H001980 H001985 H001990 H001995 H002000

M10 1 1 1 1 1 1

M14

80 m/s Quality

A80 A80 A80 A80 A80 A80

Article

H001973 H001978 H001983 H001988 H001993 H001998

10 5 10 5 10 5 10 5 10 5 10 5

ferrous D a Dimension

b

www.rottluff.com katalog_2009_Englisch.indd 33

33 16.07.09 14:12


Coated abrasives PREMIUMFLEX® Mounted flap wheels D x b / c x a (inch)

D x b / c x a (mm)

Quality Article

Quality Article

80 m/s Quality Article

1-3/16“ x 3/8 / 1/4“ x 1½“ 30 x 10 / 6 x 40 A40 H001829 A60 H001830 A80 1-3/16“ x 5/8 / 1/4“ x 1½“ 30 x 15 / 6 x 40 A40 H001843 A60 H001844 A80 1-3/16“ x 51/64 / 1/4“ x 1½“ 30 x 20 / 6 x 40 A40 H001857 A60 H001858 A80 1½ x 3/8 / 1/4“ x 1½“ 40 x 10 / 6 x 40 A40 H001902 A60 H001903 A80 1½ x 51/64 / 1/4“ x 1½“ 40 x 20 / 6 x 40 A40 H001616 A60 H001617 A80 1½ x 1-3/16“ / 1/4“ x 1½“ 40 x 30 / 6 x 40 A40 H001644 A60 H001645 A80 2“ x 51/64 / 1/4“ x 1½“ 50 x 20 / 6 x 40 A40 H011601 A60 H000757 A80 2“ x 1-3/16“ / 1/4“ x 1½“ 50 x 30 / 6 x 40 A40 H011627 A60 H011628 A80 2“ x 1½ / 1/4“ x 1½“ 50 x 40 / 6 x 40 A40 H011641 A60 H011642 A80 2-3/8“ x 51/64 / 1/4“ x 1½“ 60 x 20 / 6 x 40 A40 H011697 A60 H011698 A80 2-3/8“ x 1-3/16“ / 1/4“ x 1½“ 60 x 30 / 6 x 40 A40 H011725 A60 H000772 A80 2-3/8“ x 1½ / 1/4“ x 1½“ 60 x 40 / 6 x 40 A40 H011737 A60 H011738 A80 3-1/8“ x 1-3/16“ / 1/4“ x 1½“ 80 x 30 / 6 x 40 A40 H011765 A60 H011766 A80 3-1/8“ x 1½ / 1/4“ x 1½“ 80 x 40 / 6 x 40 A40 H011779 A60 H011780 A80 3-1/8“ x 2“ / 1/4“ x 1½“ 80 x 50 / 6 x 40 A40 H011793 A60 H011794 A80 Further dimensions and qualities on request.; Minimum order quantity: 100 pieces / grit. Life time Cutting speed Substance of content good

good

D x b / c x a (mm)

Quality

Article

Quality

80 m/s Article

1-3/16 x 10 / 1/4“ x 1½“ 30 x 10 / 6 x 40 A120 H001833 A180 H001835 1-3/16 x 5/8 / 1/4“ x 1½“ 30 x 15 / 6 x 40 A120 H001847 A180 H001849 1-3/16 x 51/64 / 1/4“ x 1½“ 30 x 20 / 6 x 40 A120 H001861 A180 H001863 1½ x 10 / 1/4“ x 1½“ 40 x 10 / 6 x 40 A120 H001906 A180 H001908 1½ x 51/64 / 1/4“ x 1½“ 40 x 20 / 6 x 40 A120 H001620 A180 H001622 1½ x 1-3/16 / 1/4“ x 1½“ 40 x 30 / 6 x 40 A120 H000745 A180 H001649 2“ x 51/64 / 1/4“ x 1½“ 50 x 20 / 6 x 40 A120 H011603 A180 H011605 2“ x 1-3/16 / 1/4“ x 1½“ 50 x 30 / 6 x 40 A120 H011631 A180 H011633 2“ x 1½ / 1/4“ x 1½“ 50 x 40 / 6 x 40 A120 H011645 A180 H011647 2-3/8“ x 51/64 / 1/4“ x 1½“ 60 x 20 / 6 x 40 A120 H011701 A180 H011703 2-3/8“ x 1-3/16 / 1/4“ x 1½“ 60 x 30 / 6 x 40 A120 H011727 A180 H011729 2-3/8“ x 1½ / 1/4“ x 1½“ 60 x 40 / 6 x 40 A120 H011741 A180 H011743 3-1/8“ x 1-3/16 / 1/4“ x 1½“ 80 x 30 / 6 x 40 A120 H011769 A180 H011771 3-1/8“ x 1½ / 1/4“ x 1½“ 80 x 40 / 6 x 40 A120 H011783 A180 H011785 3-1/8“ x 2“ / 1/4“ x 1½“ 80 x 50 / 6 x 40 A120 H011797 A180 H011799 Further dimensions and qualities on request.; Minimum order quantity: 100 pieces / grit. Life time Cutting speed Substance of content good good ferrous

PREMIUMFLEX® Mounted wheels with fleece D x b / c x a (inch)

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

ferrous

PREMIUMFLEX® Mounted flap wheels D x b / c x a (inch)

H001831 H001845 H001859 H001904 H001618 H001646 H000758 H011629 H011643 H011699 H000773 H011739 H011767 H011781 H011795

D x b / c x a (mm)

Quality Article

Quality Article

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

80 m/s Quality Article

2“ x 1-3/16 / 1/4“ x 1½“ 50 x 30 / 6 x 40 medium H003176 fine H003178 very fine 2“ x 1½ / 1/4“ x 1½“ 50 x 40 / 6 x 40 medium H003185 fine H012948 very fine 2“ x 2“ / 1/4“ x 1½“ 50 x 50 / 6 x 40 medium H000875 fine H000900 very fine 2-3/8“ x 1-3/16 / 1/4“ x 1½“ 60 x 30 / 6 x 40 medium H002901 fine H002904 very fine 2-3/8“ x 1½ / 1/4“ x 1½“ 60 x 40 / 6 x 40 medium H001913 fine H001914 very fine 2-3/8“ x 2“ / 1/4“ x 1½“ 60 x 50 / 6 x 40 medium H002911 fine H002912 very fine 3-1/8“ x 1-3/16 / 1/4“ x 1½“ 80 x 30 / 6 x 40 medium H002916 fine H002918 very fine 3-1/8“ x 1½ / 1/4“ x 1½“ 80 x 40 / 6 x 40 medium H002946 fine H002948 very fine 3-1/8“ x 2“ / 1/4“ x 1½“ 80 x 50 / 6 x 40 medium H001916 fine H001917 very fine Further dimensions and qualities on request.; Minimum order quantity: 100 pieces / grit. Life time Cutting speed Substance of content good good ferrous

H003181 H003188 H000901 H002905 H001915 H002915 H002920 H002950 H001918

10 10 10 10 10 10 10 10 10

c a b

D Dimension

34 katalog_2009_Englisch.indd 34

www.rottluff.com 16.07.09 14:12


Coated abrasives Mounted wheels with fleece in combination with

PREMIUMFLEX® abrasive cloth D x b / c x a (inch)

D x b / c x a (mm)

Quality

Article

1½ x 1-3/16 / 1/4“ x 1½“ 2“ x 51/64 / 1/4“ x 1½“ 2“ x 1-3/16 / 1/4“ x 1½“ 2-3/8“ x 1-3/16 / 1/4“ x 1½“ 2-3/8“ x 1½ / 1/4“ x 1½“ 3-1/8“ x 1½ / 1/4“ x 1½“ 3-1/8“ x 2“ / 1/4“ x 1½“

40 x 30 / 6 x 40 50 x 20 / 6 x 40 50 x 30 / 6 x 40 60 x 30 / 6 x 40 60 x 40 / 6 x 40 80 x 40 / 6 x 40 80 x 50 / 6 x 40

coarse C/A60 coarse C/A60 coarse C/A60 coarse C/A60 coarse C/A60 coarse C/A60 coarse C/A60

H001884 H003009 H000834 H002900 H001919 H000868 H001925

Quality

1½ x 1-3/16 / 1/4“ x 1½“ 2“ x 51/64 / 1/4“ x 1½“ 2“ x 1-3/16 / 1/4“ x 1½“ 2-3/8“ x 1-3/16 / 1/4“ x 1½“ 2-3/8“ x 1½ / 1/4“ x 1½“ 3-1/8“ x 1½ / 1/4“ x 1½“ 3-1/8“ x 2“ / 1/4“ x 1½“

40 x 30 / 6 x 40 50 x 20 / 6 x 40 50 x 30 / 6 x 40 60 x 30 / 6 x 40 60 x 40 / 6 x 40 80 x 40 / 6 x 40 80 x 50 / 6 x 40

medium M/A 80 medium M/A 80 medium M/A 80 medium M/A 80 medium M/A 80 medium M/A 80 medium M/A 80

H003101 H003108 H003115 H012921 H001920 H000866 H001926

medium M/A 120 medium M/A 120 medium M/A 120 medium M/A 120 medium M/A 120 medium M/A 120 medium M/A 120

PREMIUMFLEX® Strip & Clean on a backing pad D x a (mm)

4“ x 5/8 4½“ x 7/8 5“ x 7/8 7“ x 7/8 Life time good

100 x 16,0 27 115 x 22,23 27 125 x 22,23 27 180 x 22,23 27 Substance of content ferrous

Cutting speed good

Type

D x a (mm)

10 10 10 10 10 10 10

H003107 H003114 H003121 H002926 H001924 H002938 H001931

10 10 10 10 10 10 10

80 m/s

H001349 H001352 H001353 H001354

max. RPM

4“ x 1/2“ x 1/2“ 100 x 13 x 13 6.000 4½ x 1/2“ x 1/2“ 115 x 13 x 13 5.200 5“ x 1/2“ x 1/2“ 125 x 13 x 13 4.800 6“ x 1/2“ x 1/2“ 150 x 13 x 13 4.100 7“ x 1/2“ x 1/2“ 180 x 13 x 13 3.300 Adapter Adapters are available only as optional accessories. Life time Cutting speed Substance of content good good ferrous

H003103 H003110 H003117 H002922 H001922 H002934 H001928

Article

PREMIUMFLEX® Strip & Clean with adapters D x a (inch)

Article

10 10 10 10 10 10 10

1½ x 1-3/16 / 1/4“ x 1½“ 40 x 30 / 6 x 40 fine F/A 150 H003106 fine F/A 180 2“ x 51/64 / 1/4“ x 1½“ 50 x 20 / 6 x 40 fine F/A 150 H003113 fine F/A 180 2“ x 1-3/16 / 1/4“ x 1½“ 50 x 30 / 6 x 40 fine F/A 150 H003120 fine F/A 180 2-3/8“ x 1-3/16 / 1/4“ x 1½“ 60 x 30 / 6 x 40 fine F/A 150 H002925 fine F/A 180 2-3/8“ x 1½ / 1/4“ x 1½“ 60 x 40 / 6 x 40 fine F/A 150 H001923 fine F/A 180 3-1/8“ x 1½ / 1/4“ x 1½“ 80 x 40 / 6 x 40 fine F/A 150 H002937 fine F/A 180 3-1/8“ x 2“ / 1/4“ x 1½“ 80 x 50 / 6 x 40 fine F/A 150 H001929 fine F/A 180 Further dimensions and qualities on request.; Minimum order quantity: 100 pieces / grit. Life time Cutting speed Substance of content good good ferrous

D x a (inch)

80 m/s

10 10 10 10

80 m/s

Article

H001370 H001371 H001372 H001373 H001374 X000160

10 10 10 10 10 1

D Type 27

Type 29

a Dimension

b

www.rottluff.com katalog_2009_Englisch.indd 35

35 16.07.09 14:12


Diamond cutting tools

S

PROMAXcc

TURBO HP S12

PROMAXcc

FAST CUT

PROMAXcc

COOL JOBBER

PROMAXcc

ST

PROMAXcc

VC DRILL - Dry Drill System

PROMAXcc

VC DRILL - drill bit for socket outlets

PREMIUMFLEX

BLUE CUT S10

PREMIUMFLEX

TURBO S10

PREMIUMFLEX

FLIESE S8

PREMIUMFLEX

LD3 S10

PREMIUMFLEX

LD7 S10

accessiores

sharpening stick

www.rottluff.com katalog_2009_Englisch.indd 36

16.07.09 14:12


Diamond cutting tools

There are different methods for joining segments to the high-quality steel core. Sintered blades Cutting edge covers (segments, turbo, continuous rim) are directly sintered to the steel core; the cover is bonded to the core through heat and permanent pressure.

Laser blades Segments are laser welded to the steel core. Each segment is produced prior to the welding procedure; this type of production allows better adaptation of metal bond, temperature and pressure to application.

The segments consist of diamond embedded metal powder. The metal bond must be suited to the material to be cut. The metal powder consists, for example, of bronze, copper, iron, metal carbides, tungsten carbide. The various properties of metal powder provide for sharpness and wear and tear of the segment. Segment coating is carried out by sintering. Therefore, abrasive materials require a hard bond against what hard materials call for soft bond.

High-pressure/temperature method Under high pressure and temperature the segments are bonded in large press moulds directly to the core. The beneficial keyed bond guarantees a high safety against loss of segments.

Brazing Brazing is used, in particular, for largesized blades and wet cutting.

Electroplating

Diamonds are the hardest known material. They are selected depending on the field of application. For diamond blade manufacture synthetic diamonds are solely used. Compared to natural diamonds, their properties are reproducible and controllable. The following quality characteristics are significant for selecting diamonds: ·· degree of purity ·· defined breaking strength ·· sharp edges ·· consistent geometry Diamonds are classified by quality levels and grain sizes.

of diamond grit is used for cutting marble or glass fibre reinforced plastics.

D = Diameter X = Height of segment H = Hole

www.rottluff.com katalog_2009_Englisch.indd 37

37 16.07.09 14:12


Diamond cutting tools PROMAXcc® Turbo HP S12 D x H x X (inch) 4½“ x 7/8 x 1/2“ 5“ x 7/8 x 1/2“ 6“ x 7/8 x 1/2“ 7“ x 7/8 x 1/2“ 9“ x 7/8 x 1/2“ Life time Cutting speed very high very high

D x H x X (mm) 115 x 22,23 x 12 125 x 22,23 x 12 150 x 22,23 x 12 180 x 22,23 x 12 230 x 22,23 x 12 Cutting process dry

Article D200800 D200801 D200803 D200804 D200805

PROMAXcc® FAST CUT D x H x X (inch) 4½“ x 7/8 x 5/16-CR 5“ x 7/8 x 5/16-CR 6“ x 7/8 x 5/16-CR 7“ x 7/8 x 5/16-CR 9“ x 7/8 x 5/16-CR Life time Cutting speed very high very high

D x H x X (mm) 115 x 22,23 x 8-CR 125 x 22,23 x 8-CR 150 x 22,23 x 8-CR 180 x 22,23 x 8-CR 230 x 22,23 x 8-CR Cutting process dry

D x H x X (mm) 230 x 22,23 x 10 Cutting process dry

D x H x X (inch) 4“ x 7/8 x 3/64“ 5“ x 7/8 x 3/64“ 7“ x 7/8 x 3/64“ Life time Cutting speed very high very high

D x H x X (mm) 100 x 22,23 x 5 125 x 22,23 x 5 180 x 22,23 x 5 cutting process dry

80m/s 1 1 1 1 1

80m/s

Article D880225

PROMAXcc® ST Diamond cup wheel

S

1 1 1 1 1

Article D300800 D300801 D300803 D300804 D300805

PROMAXcc® COOL JOBBER D x H x X (inch) 9“ x 7/8 x 3/8 Life time Cutting speed very high very high

80m/s

1

80m/s

Article D280301 D280303 D280304

S

1 1 1

PROMAXcc® VC DRILL - Dry Drill System SET M18 consisting of: 1 x adapter 1 x dust exhaust ring 1 x expel pin 1 x center drill bit

Article D990000 2 x quick mount spindle 2 x drill bit for socket outlets d=82mm 1 x drill bit for socket outlets d=68mm

PROMAXcc® VC DRILL - drill bit for socket outlets D x H x X (inch)

D x H x X (mm)

Article

Ø 2-2/3“ x M16

Ø 68 x M16

D990001

Ø 3-1/4“ x M16

Ø 82 x M16

D990002

38 katalog_2009_Englisch.indd 38

S

www.rottluff.com 16.07.09 14:12


Diamond cutting tools PREMIUMFLEX® BLUE CUT S10 D x H x X (inch) 4½“ x 7/8 x 3/8 5“ x 7/8 x 3/8 7“ x 7/8 x 3/8 9“ x 7/8 x 3/8 Life time Cutting speed medium high

D x H x X (mm) 115 x 22,23 x 10 125 x 22,23 x 10 180 x 22,23 x 10 230 x 22,23 x 10 Cutting process dry

Article D100901 D100902 D100904 D100905

PREMIUMFLEX® Turbo S10 D x H x X (inch) 4½“ x 7/8 x 3/8-CR 5“ x 7/8 x 3/8-CR 6“ x 7/8 x 3/8-CR 7“ x 7/8 x 3/8-CR 9“ x 7/8 x 3/8-CR Life time high

Cutting speed high

D x H x X (mm) 115 x 22,23 x 10-CR 125 x 22,23 x 10-CR 150 x 22,23 x 10-CR 180 x 22,23 x 10-CR 230 x 22,23 x 10-CR

S

1 1 1 1 1

D x H x X (mm) 110 x 22,23 x 8-CR 115 x 22,23 x 8-CR 125 x 22,23 x 8-CR 150 x 22,23 x 8-CR 180 x 22,23 x 8-CR 230 x 22,23 x 8-CR Cutting process dry

80m/s Article D300900 D300901 D300902 D300903 D300904 D300905

D x H x X (mm) 115 x 22,23 x 10 125 x 22,23 x 10 150 x 22,23 x 10 180 x 22,23 x 10 230 x 22,23 x 10 Cutting process dry

D x H x X (mm) 300 x 25,4 x 10 350 x 25,4 x 10 400 x 25,4 x 10 450 x 25,4 x 10 500 x 25,4 x 10 Cutting process dry

1 1 1 1 1 1

80m/s Article D210901 D210902 D210903 D210904 D210905

PREMIUMFLEX® LD7 S10 D x H x X (inch) 12" x 1" x 3/8" 14" x 1" x 3/8" 16" x 1" x 3/8" 18" x 1" x 3/8" 20" x 1" x 3/8" Life time Cutting speed high very high

80m/s

Cutting process dry

PREMIUMFLEX® LD3 S10 D x H x X (inch) 4½“ x 7/8 x 3/8 5“ x 7/8 x 3/8 6“ x 7/8 x 3/8 7“ x 7/8 x 3/8 9“ x 7/8 x 3/8 Life time Cutting speed high very high

S

1 1 1 1

Article D200901 D200902 D200903 D200904 D200905

PREMIUMFLEX® Fliese S8 D x H x X (inch) 4“ x 7/8 x 5/16-CR 4½“ x 7/8 x 5/16-CR 5“ x 7/8 x 5/16-CR 6“ x 7/8 x 5/16-CR 7“ x 7/8 x 5/16-CR 9“ x 7/8 x 5/16-CR Life time Cutting speed high high

80m/s

1 1 1 1 1

80m/s Article D600907 D600908 D600909 D600910 D600911

1 1 1 1 1

Accessories Article Sharpening stick for diamond cutting tools

D000001

D = Diameter X = Height of segment H = Hole

www.rottluff.com katalog_2009_Englisch.indd 39

39 16.07.09 14:12


Cup wheels and grinding rings

www.rottluff.com katalog_2009_Englisch.indd 40

16.07.09 14:13


Cup wheels and grinding rings PREMIUMFLEX® Cup wheels metal Quality d1/d2 x a x b (inch)

80 m/s

d1/d2 x a x b (mm)

Article

d1/d2 x a x b (inch)

d1/d2 x a x b (mm)

Article

110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23

O 000063 O 000064 O 000066 O 000070 O 000071 O 000073

4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14

110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14

O 000027 O 000028 O 000030 O 000034 O 000035 O 000037

10 10 10 10 10 10

A 16 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 A 24 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 A 36 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 A 60 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 A 80 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 A 120 Q 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 Other sizes are available on request.

O 000103 O 000104 O 000105 O 000107 O 000108 O 000109

5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14

130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14

O 000082 O 000083 O 000084 O 000086 O 000087 O 000088

10 10 10 10 10 10

A 16 Q A 24 Q A 36 Q A 60 Q A 80 Q A 120 Q

4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“

Life time good

Cutting speed good

C 16 N C 24 N C 36 N C 60 N C 80 N C 120 N

4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“ 4“x3-1/2“x2-1/8“x7/8“

80 m/s

S

d1/d2 x a x b (mm)

Article

d1/d2 x a x b (inch)

d1/d2 x a x b (mm)

Article

110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23 110/90 x 55 x 22,23

O 000051 O 000052 O 000054 O 000057 O 000058 O 000060

4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14 4“x3-1/2“x2-1/8“xM14

110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14 110/90 x 55 x M14

O 000039 O 000040 O 000042 O 000046 O 000047 O 000049

10 10 10 10 10 10

5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14 5-1/8“x3-1/2“x2-1/8“xM14

130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14 130/90 x 55 x M14

O 000089 O 000090 O 000091 O 000093 O 000094 O 000095

10 10 10 10 10 10

Grinding cup wheels and

d /d x a x b (inch) 2

d /d x a x b (mm) 1

2

ZA20P-B/50 4“/3-1/2“x2-1/8“x7/8“ 110/90 x 55 x 22,23 ZA24Q-B/50 5“x2-1/2“x M20 125 x 65 x M20 ZA16R-B/50 5“x2-1/2“x M20 125 x 65 x M20 A16Q-B/50 6“x2-7/8“x 2-1/2“ (4 x M8) 150 x 72 x 56 (4 x M8) A14V-B/50 6“x2-1/8“xM20 150 x 55 x M20 ZA16R-B/50 10“x1-1/4“x1“ (6“x1/2“) 250 x 32 x 25,4 (153 x 12) A16Q5-BF/50 10“x1“x1“ 250 x 25 x 25,4 A16Q5-BF/50 10“x51/64“x1“ 250 x 20 x 25,4 A16R-BF/63 10“x1“x4-3/4“ 250 x 25 x 120 ZA16R-BF/63 10“x1“x4-3/4“ 250 x 25 x 120 Other sizes are available on request. Life time Cutting speed Substance of content good very high ferrous

d2 b a d1 Dimension

PREMIUMFLEX® grinding rings for rail tracks Quality

a d1 Dimension

C 16 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000096 C 24 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000097 C 36 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000098 C 60 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000100 C 80 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000101 C 120 N 5-1/8“x3-1/2“x2-1/8“x5/8“ 130/90 x 55 x 22,23 O 000102 Other sizes are available on request. Life time Cutting speed Substance of content good good ferrous

1

b

Substance of content ferrous

PREMIUMFLEX® Cup wheels stone Quality d1/d2 x a x b (inch)

d2

50/63 m/s

Type Article

11 6 6 6 6 5 1 1 1 1

O 001125 O 000320 O 000325 O 000257 O 000324 O 001219 O 001221 O 001220 O 001222 O 001223

10 10 10 10 10 10 10 10 10 10

d2 Form 1

Form 5

Form 6

Form 11

www.rottluff.com katalog_2009_Englisch.indd 41

b

d1 Dimension

41 16.07.09 14:13


Wire brushes

www.rottluff.com katalog_2009_Englisch.indd 42

16.07.09 14:13


Wire brushes PREMIUMFLEX® Knot wheel brushes D x b x a (inch)

D x b x a (mm)

4,5“x1/2“x7/8“ 7“x1/2“x7/8“

115 x 12,0 x 22,23 178 x 12,0 x 22,23

4,5“x1/4“x7/8“ 7“x1/4“x7/8“

115 x 6,0 x 22,23 178 x 6,0 x 22,23

12.500 9.000

Number of knots 20 32

Steel wire/0,50 L472211 L475211

Stainless/0,50 L472811 L475811

1 1

15.000 12.500

32 76

L472201 L475201

L472801 L475801

1 1

Steel wire/0,50 L471257 L472257

Stainless/0,50 L471857 L472857

1 1

max. r.p.m.

PREMIUMFLEX® Knot conical brushes D x b x a (inch)

D x b x a (mm)

4“x1/2“M14x5/64“ 4,5“x1/2“M14x5/64“

100 x 12 M14 x 2,0 115 x 12 M14 x 2,0

Number of knots 18 20

max. r.p.m. 12.500 15.000

PREMIUMFLEX® Knot cup brushes D x b x a (inch)

D x b x a (mm)

max. r.p.m.

2-1/2“ M14 x 5/64“ 3-1/8“ M14 x 5/64“ 3-1/8“ 5/8-11 4“ M14x 5/64“ 4“ 5/8-11

65 M14 x 2,0 80 M14 x 2,0 80 5/8-11 100 M14 x 2,0 100 5/8-11

12.500 9.000 9.000 9.000 9.000

Number of knots 18 20 20 26 26

Steel wire/0,50 L482217 L484217 L484218 L486217 L486218

Stainless/0,50 L482817 L484817 L484818 L486817 L486818

1 1 1 1 1

PREMIUMFLEX® Cup brushes D x b x a (inch)

D x b x a (mm)

max. r.p.m.

2-1/2“ M14 x 5/64“ 3-1/8“ M14 x 5/64“ 3-1/8“ 5/8-11 4“ M14x 5/64“ 4“ 5/8-11

60 M14 x 2,0 80 M14 x 2,0 80 5/8-11 100 M14 x 2,0 100 5/8-11

12.000 8.500 8.500 8.500 8.500

Steel wire/0,50 L421167 L424177 L424178 L426177 L426178

Stainless/0,50 L421367 L424367 L426367

1 1 1 1

D a Dimension

b

www.rottluff.com katalog_2009_Englisch.indd 43

43 16.07.09 14:13


Extras

www.rottluff.com katalog_2009_Englisch.indd 44

16.07.09 14:13


Extras Point of sales materials Dimension W x H x D (inch) Promotion stand (rack) 41“ x 73“ x 18“

Dimension W x H x D (mm) 1030 x 1840 x 450

Promotion stand (hexagon)

Article X000006

1

Dimension W x H (inch)

Dimension W x H (mm)

25“ x 68“ (74“)

630 x 1700 (1850) X000007

Article 1

Drilling machine Article drilling machine for PROMAXcc VC DRILL Dry Drill System 1200 W X000001 220-230 V ~ 50 Hz n° = 1.500 / 3.000 min-1

1

www.rottluff.com katalog_2009_Englisch.indd 45

45 16.07.09 14:13


GENERAL TERMS AND CONDITIONS OF SCHLEIFSCHEIBENFABRIK ROTTLUFF GMBH

3. Deviating, conflicting, or supplementary terms and conditions, even if known, do not become a part of the contract unless their application is approved in writing. Section 2 Conclusion of Agreements 1. Our quotations are non-binding. The corporation reserves the right to technical modifications as well as changes in the methods of manufacture, composition, materialswithin reasonable boundaries even after concluding an agreement as long as the price and the intended purpose of the goods remain unchanged. Unless our statements in quotations and confirmations are accompanied by documentation (drawings, specifications), such statements should be considered approximate only. 2. Ordering goods is a binding statement by a customer, that customer wants to purchase these goods. Verbal or written statements made prior to concluding an agreement can only become a part thereof if the parties expressly agreed to this. We are entitled to accept a contract offer as expressed in the purchase order within two weeks upon receipt. We can declare acceptance either in writing or by delivering the goods to the customer. 3. Purchase orders may be transmitted electronically if a business relationship already exists. First orders by customers can only be placed in writing. If customer orders goods electronically, we will immediately confirm receipt of the purchase order. Confirmation of receipt is not a binding acceptance of the purchase order. A notice of acceptance can be combined with the confirmation of receipt. 4. An agreement is concluded with the proviso of correct and timely deliveries by our suppliers. This applies to cases where we are not responsible for non-delivery, particularly when placing a congruent hedging transaction with our supplier. We will inform the customer about non-availability of the service immediately. Any consideration executed will be reimbursed immediately. 5. If a consumer orders goods electronically, we will store the wording of the agreement and, upon request, e-mail it to the customer together with these Terms and Conditions. 6. The customer accepts full liability for materials, drawings, samples, and models to be provided by the customer. The delivered items are binding for the order. Section 3 Reservation of Title 1. For agreements with consumers, we reserve the title to our goods until the purchase price has been paid in full. For agreements with businesspersons, we reserve the title to our goods until all claims from the current business relationship have been paid in full. 2. The Customer is obligated to treat the goods with care. 3. The Customer may neither pledge nor assign the reserved goods as security for a debt. The Customer is obligated to report any seizure of the goods by third parties, such as an attachment of property, as well as any damage or destruction of the goods to us immediately. Customer must report any change of possession of the goods as well as any change of his or her residence promptly. 4. We are entitled to withdraw from the agreement and to reclaim the goods if the customer violates the agreement, in particular, delays payment or violates a duty under paras. 2 to 4 of this Section. 5. Businesspersons are entitled to resell the goods in the ordinary course of business. Businesspersons assign in advance all claims against a third party accrued from such resale in the amount of the invoice to us. We accept the assignment. After assignment, businesspersons are authorized to collect the claims. We reserve the right to collect the sum due ourselves if a businessperson fails to meet his financial obligations and is in default. 6. Businesspersons always process goods on our behalf and by our order. If processing is performed using objects that do not belong to us, we become co-owners of the new item in the proportion the value of goods we delivered has to other objects processed. The same applies if the goods are mixed with other items that do not belong to us. 7. If the value of securities that exist for us exceeds our claims by a total of 10 %, we will release appropriate securities upon request. Section 4 Remuneration 1. The purchase price quoted is binding (but may be limited

If the consumer fails to notify, the consumer’s warranty rights expire two months after detection of the defect. This does not apply if the seller acted fraudulently. The onus of proof of the time when the defect was detected is on the consumer. If the consumer decided to buy the article based on untrue statements by the manufacturer, the onus of proof of his purchasing decision is on the customer. If the goods were used, the onus of proof that the article was defective is on the consumer.

3. If the customer changes an order later, any machine downtime caused and spezial labeling requests are subject to remuneration.

4. If the customer chooses to withdraw from the agreement due to a legal or material defect and after rectification has failed, customer may not claim additional damages based on the defect. If customer chooses compensation for damages after rectification has failed, the goods remain with the customer if this is reasonable. Compensation for damages is limited to the difference between the purchase price and the value of the defective item. This does not apply if we violated the agreement fraudulently.

4. The customer undertakes to pay the purchase price without deductions within 30 days upon receipt of the goods. The customer will be in default when this period has expired. While in default, consumer customers have to pay interest of 5 % in addition to the base rate on the amount owed. While in default, businesspersons have to pay interest of 8 % in addition to the base rate on the amount owed. We reserve the right to prove and assert a greater damage caused by default against businesspersons. If the customer is in default paying the bill due to general liquidity problems or if the customer’s financial situation has dramatically deteriorated since the agreement was concluded, all the customer’s accounts payable to us become due immediately. We are entitled to make deliveries on security or advance payment, or to withdraw from the agreement. This also applies if customer fails to pay despite a reminder of the late payment. We are not liable for any damages caused to the businessperson. We undertake to inform the businessperson of the suspension of deliveries promptly and in writing. The customer will only have a right to setoff if customer’s counterclaims were recognized by declaratory judgment or accepted by us. The customer can only exercise his right to retention if his counterclaim is based on the same contractual relationship. Section 5 Passing of Risk, Delivery 1. If the customer is a businessperson, the risk of accidental loss or deterioration of the goods is passed to the purchaser upon transfer, in the case of a sale by delivery to a place other than the place of performance upon delivery to the carrier or any other person or institution appointed to carry out the delivery. If the customer picks the goods up at our premises, the risk of accidental loss is passed to the customer when he indicates he is ready to ship. 2. Risk passes equally if the customer delays receipt. 3. When the goods are ordered, the parties agree on a binding delivery period or date. This period does not begin before the customer has done everything the customer was to provide in advance. Delivery period or date are deemed met when the goods have left our premises or if we have indicated that we are ready top ship by the date of expiry. If we are in default with our deliveries or services, customer should first grant a reasonable grace period. Customer may withdraw from the agreement upon expiry of that period. The delivery period is appropriately extended in cases of force majeure and unexpected obstacles that are beyond our control, if auxiliary materials are delivered late, and if subcontractors cause delays. We cannot be held responsible for these delivery problems even if they occur at a time when customer already experiences a delay. Compensation for default in the event of a delay in delivery we negligently caused is limited to 5 % of the order value unless the customer can prove greater damages. We reserve the right to prove a lesser damage to the customer. Such liability only applies to acts of gross negligence or intentional doing. Partial and early deliveries are permissible. We reserve the right to deliver 10 % more or less than the contractual quantity. Customer may not derive any rights herefrom. Section 6 Warranty 1. If the customer is a businessperson, we first rectify any defects in the goods or deliver goods in replacement at our discretion to meet our warranty obligations. If the customer is a consumer, the customer may choose if the warranty obligation is to be met by rectification of the defects or a replacement delivery. However, we are entitled to refuse the type of meeting the warranty obligation if it can only be done at great expense and the other type of meeting the warranty obligation has no major disadvantages for the consumer.

for finishing operations

for stationary cutting machines up to 2 kW

for freehand grinding

for unmounted wheels

for stationary cutting machines from 2 kW

for rough grinding on portable machines for walk-behind saws

for portable gasolinedriven saws

5. The warranty period for businesspersons is one year after the goods were handed over. The warranty period for consumers is two years after the goods were handed over. This does not apply if the customer did not report the defect in time (see para. 4 of this Section). 6. If the customer is a businessperson, the agreed condition of the goods is the manufacturer’s product description. Public statements, touting or advertising on the part of the manufacturer do not constitute a condition of the goods according to the agreement.

for walk-behind saws

steel, structural steels, highstrength

rail tracks

stone, general purpose

steel sheets, thin-walled profiles

tool steel

concrete, reinforced

1. Our liability for slightly negligent violations of our duties is limited to predictable, typical, and immediate damages depending on the nature of the goods. This includes slightly negligent violations by our legal representatives or agents. We do not accept liability for slightly negligent violations of minor obligations under a contract with businesspersons.

stainless steels, high-alloyed Stainless steels, low-alloyed

austenitic steels Titanium

concrete

2. The limitations of liability as explained above do not apply to customer’s claims under product liability laws. Furthermore, these limitations of liability do not apply to a customer’s personal injury or loss of life that we are responsible for.

stainless steel, VA-steel sheet

titanium

exposed aggregate concrete

asphalt

granite

marble

roof-tiles clay pipes

cellular concrete Pumice blocks

clinker refractory bricks sandstone bricks

plastics, PVC, etc.

hard artificial stone

tiles, ceramics

follow safety instructions

wear protective goggles

do not use for freehand cutting

wear protective gloves

wear ear protection

do not use for side grinding

wear protective mask

do not use if damaged

7. Warranty claims are excluded if the goods were used inappropriately, incorrect assembly, or became subject to natural wear and tear. Defects of a part of the goods do not entitle the customer to report the entire delivery as defective. 8. We do not give the customer any guarantees in the legal meaning of this term. Manufacturer’s warranties remain unaffected. Section 7 Limitations of Liability

3. A customer’s claim for damages because of a defect expire after one year after handing over the goods. This does not apply if we can be accused of fraud. Section 8 Final Provisions 1. Applicable law is the law of the Federal Republic of Germany. The provisions of the United Nations Convention on Contracts for the International Sale of Goods do not apply.

structural steels in general

2. If the customer is a businessperson, a legal entity under public law or a separate public estate, the exclusive place of performance and venue for all disputes is our headquarters. The same applies if the customer does not have a venue in Germany or if the customer’s place of residence or customary place of abode were not known when the complaint was filed. We are also entitled to institute proceedings at the place of the customer’s headquarters.

ductile cast iron pipes

3. If individual provisions of the agreement with the customer including these Terms and Conditions are found or become partially or completely ineffective, the validity of all other provisions remains unaffected. The partially or completely ineffective provision is to be replaced by a provision that comes closest to the economic results of the ineffective provision .

non-ferrous metals in general

2. If the attempt at meeting the warranty obligation fails, customer may in principle demand a reduction in remuneration (reduction) or cancellation of the agreement (withdrawal). If the violation of the agreement is minor, especially if the defects are minor, customer may not exercise the right to withdrawal. 3. Businesspersons must report apparent defects within a period of two weeks from receipt of the goods; otherwise they cannot assert any warranty claim. Timely mailing of such notice suffices to meet the due date. The full onus of proof of all conditions required to assert the claim, in particular, the defect itself, the time when the defect was detected, and the timely sending of the notice of defects is on the businessperson. Consumers have to notify us in writing of apparent defects within a period of two months from the time when the nonconforming state of the goods was detected. It is decisive for keeping the deadline that we receive the notification in time.

www.rottluff.com umschlag_eng.indd 1

for portable machines

grey cast iron, spheroidal cast iron, cast steel and malleable cast iron aluminium,

Ti

machinery instructions

2. Consumers in the meaning hereunder are natural entities with which the corporationenters into a business relationship although these entities cannot be assigned anycommercial or independent occupational activity. Businesspersons in the meaninghereunder are natural or legal entities or partnerships that have legal capacity thatexecute a commercial or independent occupational activity and with which the corporationenters into a business relationship. Customers in the meaning hereunder are both consumers and businesspersons.

in time). The purchase price quoted to a businessperson is a net price without VAT. The applicable VAT increases the price quoted to a consumer. Any quoted purchase price is ex works excluding packaging, freight, postage, insurance and other shipping fees. 2. Prices listed in our quotations apply with the proviso that the order data and quantities the quotation is based upon remain unchanged. If an order falls below EUR 500.00, we are entitled to increase the order value to a minimum of EUR 500.00.

applications l materials

1. These Terms and Conditions apply to all present and future business relation

safety instructions

Section 1 Scope, Definitions

icons

www.rottluff.com 03.07.09 11:43


GENERAL TERMS AND CONDITIONS OF SCHLEIFSCHEIBENFABRIK ROTTLUFF GMBH

3. Deviating, conflicting, or supplementary terms and conditions, even if known, do not become a part of the contract unless their application is approved in writing. Section 2 Conclusion of Agreements 1. Our quotations are non-binding. The corporation reserves the right to technical modifications as well as changes in the methods of manufacture, composition, materialswithin reasonable boundaries even after concluding an agreement as long as the price and the intended purpose of the goods remain unchanged. Unless our statements in quotations and confirmations are accompanied by documentation (drawings, specifications), such statements should be considered approximate only. 2. Ordering goods is a binding statement by a customer, that customer wants to purchase these goods. Verbal or written statements made prior to concluding an agreement can only become a part thereof if the parties expressly agreed to this. We are entitled to accept a contract offer as expressed in the purchase order within two weeks upon receipt. We can declare acceptance either in writing or by delivering the goods to the customer. 3. Purchase orders may be transmitted electronically if a business relationship already exists. First orders by customers can only be placed in writing. If customer orders goods electronically, we will immediately confirm receipt of the purchase order. Confirmation of receipt is not a binding acceptance of the purchase order. A notice of acceptance can be combined with the confirmation of receipt. 4. An agreement is concluded with the proviso of correct and timely deliveries by our suppliers. This applies to cases where we are not responsible for non-delivery, particularly when placing a congruent hedging transaction with our supplier. We will inform the customer about non-availability of the service immediately. Any consideration executed will be reimbursed immediately. 5. If a consumer orders goods electronically, we will store the wording of the agreement and, upon request, e-mail it to the customer together with these Terms and Conditions. 6. The customer accepts full liability for materials, drawings, samples, and models to be provided by the customer. The delivered items are binding for the order. Section 3 Reservation of Title 1. For agreements with consumers, we reserve the title to our goods until the purchase price has been paid in full. For agreements with businesspersons, we reserve the title to our goods until all claims from the current business relationship have been paid in full. 2. The Customer is obligated to treat the goods with care. 3. The Customer may neither pledge nor assign the reserved goods as security for a debt. The Customer is obligated to report any seizure of the goods by third parties, such as an attachment of property, as well as any damage or destruction of the goods to us immediately. Customer must report any change of possession of the goods as well as any change of his or her residence promptly. 4. We are entitled to withdraw from the agreement and to reclaim the goods if the customer violates the agreement, in particular, delays payment or violates a duty under paras. 2 to 4 of this Section. 5. Businesspersons are entitled to resell the goods in the ordinary course of business. Businesspersons assign in advance all claims against a third party accrued from such resale in the amount of the invoice to us. We accept the assignment. After assignment, businesspersons are authorized to collect the claims. We reserve the right to collect the sum due ourselves if a businessperson fails to meet his financial obligations and is in default. 6. Businesspersons always process goods on our behalf and by our order. If processing is performed using objects that do not belong to us, we become co-owners of the new item in the proportion the value of goods we delivered has to other objects processed. The same applies if the goods are mixed with other items that do not belong to us. 7. If the value of securities that exist for us exceeds our claims by a total of 10 %, we will release appropriate securities upon request. Section 4 Remuneration 1. The purchase price quoted is binding (but may be limited

If the consumer fails to notify, the consumer’s warranty rights expire two months after detection of the defect. This does not apply if the seller acted fraudulently. The onus of proof of the time when the defect was detected is on the consumer. If the consumer decided to buy the article based on untrue statements by the manufacturer, the onus of proof of his purchasing decision is on the customer. If the goods were used, the onus of proof that the article was defective is on the consumer.

3. If the customer changes an order later, any machine downtime caused and spezial labeling requests are subject to remuneration.

4. If the customer chooses to withdraw from the agreement due to a legal or material defect and after rectification has failed, customer may not claim additional damages based on the defect. If customer chooses compensation for damages after rectification has failed, the goods remain with the customer if this is reasonable. Compensation for damages is limited to the difference between the purchase price and the value of the defective item. This does not apply if we violated the agreement fraudulently.

4. The customer undertakes to pay the purchase price without deductions within 30 days upon receipt of the goods. The customer will be in default when this period has expired. While in default, consumer customers have to pay interest of 5 % in addition to the base rate on the amount owed. While in default, businesspersons have to pay interest of 8 % in addition to the base rate on the amount owed. We reserve the right to prove and assert a greater damage caused by default against businesspersons. If the customer is in default paying the bill due to general liquidity problems or if the customer’s financial situation has dramatically deteriorated since the agreement was concluded, all the customer’s accounts payable to us become due immediately. We are entitled to make deliveries on security or advance payment, or to withdraw from the agreement. This also applies if customer fails to pay despite a reminder of the late payment. We are not liable for any damages caused to the businessperson. We undertake to inform the businessperson of the suspension of deliveries promptly and in writing. The customer will only have a right to setoff if customer’s counterclaims were recognized by declaratory judgment or accepted by us. The customer can only exercise his right to retention if his counterclaim is based on the same contractual relationship. Section 5 Passing of Risk, Delivery 1. If the customer is a businessperson, the risk of accidental loss or deterioration of the goods is passed to the purchaser upon transfer, in the case of a sale by delivery to a place other than the place of performance upon delivery to the carrier or any other person or institution appointed to carry out the delivery. If the customer picks the goods up at our premises, the risk of accidental loss is passed to the customer when he indicates he is ready to ship. 2. Risk passes equally if the customer delays receipt. 3. When the goods are ordered, the parties agree on a binding delivery period or date. This period does not begin before the customer has done everything the customer was to provide in advance. Delivery period or date are deemed met when the goods have left our premises or if we have indicated that we are ready top ship by the date of expiry. If we are in default with our deliveries or services, customer should first grant a reasonable grace period. Customer may withdraw from the agreement upon expiry of that period. The delivery period is appropriately extended in cases of force majeure and unexpected obstacles that are beyond our control, if auxiliary materials are delivered late, and if subcontractors cause delays. We cannot be held responsible for these delivery problems even if they occur at a time when customer already experiences a delay. Compensation for default in the event of a delay in delivery we negligently caused is limited to 5 % of the order value unless the customer can prove greater damages. We reserve the right to prove a lesser damage to the customer. Such liability only applies to acts of gross negligence or intentional doing. Partial and early deliveries are permissible. We reserve the right to deliver 10 % more or less than the contractual quantity. Customer may not derive any rights herefrom. Section 6 Warranty 1. If the customer is a businessperson, we first rectify any defects in the goods or deliver goods in replacement at our discretion to meet our warranty obligations. If the customer is a consumer, the customer may choose if the warranty obligation is to be met by rectification of the defects or a replacement delivery. However, we are entitled to refuse the type of meeting the warranty obligation if it can only be done at great expense and the other type of meeting the warranty obligation has no major disadvantages for the consumer.

for finishing operations

for stationary cutting machines up to 2 kW

for freehand grinding

for unmounted wheels

for stationary cutting machines from 2 kW

for rough grinding on portable machines for walk-behind saws

for portable gasolinedriven saws

5. The warranty period for businesspersons is one year after the goods were handed over. The warranty period for consumers is two years after the goods were handed over. This does not apply if the customer did not report the defect in time (see para. 4 of this Section). 6. If the customer is a businessperson, the agreed condition of the goods is the manufacturer’s product description. Public statements, touting or advertising on the part of the manufacturer do not constitute a condition of the goods according to the agreement.

for walk-behind saws

steel, structural steels, highstrength

rail tracks

stone, general purpose

steel sheets, thin-walled profiles

tool steel

concrete, reinforced

1. Our liability for slightly negligent violations of our duties is limited to predictable, typical, and immediate damages depending on the nature of the goods. This includes slightly negligent violations by our legal representatives or agents. We do not accept liability for slightly negligent violations of minor obligations under a contract with businesspersons.

stainless steels, high-alloyed Stainless steels, low-alloyed

austenitic steels Titanium

concrete

2. The limitations of liability as explained above do not apply to customer’s claims under product liability laws. Furthermore, these limitations of liability do not apply to a customer’s personal injury or loss of life that we are responsible for.

stainless steel, VA-steel sheet

titanium

exposed aggregate concrete

asphalt

granite

marble

roof-tiles clay pipes

cellular concrete Pumice blocks

clinker refractory bricks sandstone bricks

plastics, PVC, etc.

hard artificial stone

tiles, ceramics

follow safety instructions

wear protective goggles

do not use for freehand cutting

wear protective gloves

wear ear protection

do not use for side grinding

wear protective mask

do not use if damaged

7. Warranty claims are excluded if the goods were used inappropriately, incorrect assembly, or became subject to natural wear and tear. Defects of a part of the goods do not entitle the customer to report the entire delivery as defective. 8. We do not give the customer any guarantees in the legal meaning of this term. Manufacturer’s warranties remain unaffected. Section 7 Limitations of Liability

3. A customer’s claim for damages because of a defect expire after one year after handing over the goods. This does not apply if we can be accused of fraud. Section 8 Final Provisions 1. Applicable law is the law of the Federal Republic of Germany. The provisions of the United Nations Convention on Contracts for the International Sale of Goods do not apply.

structural steels in general

2. If the customer is a businessperson, a legal entity under public law or a separate public estate, the exclusive place of performance and venue for all disputes is our headquarters. The same applies if the customer does not have a venue in Germany or if the customer’s place of residence or customary place of abode were not known when the complaint was filed. We are also entitled to institute proceedings at the place of the customer’s headquarters.

ductile cast iron pipes

3. If individual provisions of the agreement with the customer including these Terms and Conditions are found or become partially or completely ineffective, the validity of all other provisions remains unaffected. The partially or completely ineffective provision is to be replaced by a provision that comes closest to the economic results of the ineffective provision .

non-ferrous metals in general

2. If the attempt at meeting the warranty obligation fails, customer may in principle demand a reduction in remuneration (reduction) or cancellation of the agreement (withdrawal). If the violation of the agreement is minor, especially if the defects are minor, customer may not exercise the right to withdrawal. 3. Businesspersons must report apparent defects within a period of two weeks from receipt of the goods; otherwise they cannot assert any warranty claim. Timely mailing of such notice suffices to meet the due date. The full onus of proof of all conditions required to assert the claim, in particular, the defect itself, the time when the defect was detected, and the timely sending of the notice of defects is on the businessperson. Consumers have to notify us in writing of apparent defects within a period of two months from the time when the nonconforming state of the goods was detected. It is decisive for keeping the deadline that we receive the notification in time.

www.rottluff.com umschlag_eng.indd 1

for portable machines

grey cast iron, spheroidal cast iron, cast steel and malleable cast iron aluminium,

Ti

machinery instructions

2. Consumers in the meaning hereunder are natural entities with which the corporationenters into a business relationship although these entities cannot be assigned anycommercial or independent occupational activity. Businesspersons in the meaninghereunder are natural or legal entities or partnerships that have legal capacity thatexecute a commercial or independent occupational activity and with which the corporationenters into a business relationship. Customers in the meaning hereunder are both consumers and businesspersons.

in time). The purchase price quoted to a businessperson is a net price without VAT. The applicable VAT increases the price quoted to a consumer. Any quoted purchase price is ex works excluding packaging, freight, postage, insurance and other shipping fees. 2. Prices listed in our quotations apply with the proviso that the order data and quantities the quotation is based upon remain unchanged. If an order falls below EUR 500.00, we are entitled to increase the order value to a minimum of EUR 500.00.

applications l materials

1. These Terms and Conditions apply to all present and future business relation

safety instructions

Section 1 Scope, Definitions

icons

www.rottluff.com 03.07.09 11:43


Schleifscheibenfabrik Rottluff GmbH Weideweg 17 l D-09116 Chemnitz Postal address: Postfach 900136 l D-09037 Chemnitz Telephone: +49 (0) 371 3 69 95-0 Telefax: +49 (0) 371 3 69 95-30 e-Mail: info@rottluff.com www. rottluff.com

www.rottluff.com umschlag_eng.indd 2

www.rottluff.com 03.07.09 11:43


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.