14
#
27 LED SLIDING WORK LIGHT NEW Telescoping design for compact storage size. Turn the light on by sliding the body out to expose LED panel and off by retracting.
E
TC
O
SI E V
MA
PR
COMPACT STORAGE SIZE
7他"
XC LU
MSL11
$69.95
Hanging hook is another option for hands free use
Magnetic base allows for hands free use when mounted to metal surface
Light output 102 lumens Metal stand can extend from base of light if no magnetic surface is available to mount to
Includes built in 3.7V rechargeable lithium battery. Charger has a 4 hour charge time for a 5 hour output.
FREE CART WITH QUALIFYING TOOLBOX
MSCL440
INSIDE
JSC500+TT
Includes 100~240V charger
MSC4
12, 16, 20, 58
July 9 - 31, 2011
PAGE 8
GREAT TIME SAVER!
According to BodyShop Business, in a 40-hour workweek, a body shop painter spends 13.3 hours sanding. At a $40 per hour door rate, that translates into $532 of labor time per week, or at $50 per hour, $665 of labor.
$161.95 Save nearly $20
MT1788
Cut that time by 10% by using a power sander and get ahead by more than $200 a month. Recoup the cost of the MT1788 in less than a month!
5" HIGH SPEED SANDER ••5" high-speed sander, non reversing
MT1788 For more exclusive Torque Tips and information, register on www.matcotools.com
for use in body shops and other general automotive applications ••Built-in Matco comfort grip and regulator with and variable speed trigger ••Includes 3", 4-1/2" and 5" backing pads ••14,000 RPM for power and convenience
BODY REPAIR POWER TOOLS
$174.95 Save nearly $25
MT1644K
••Durable composite housing makes this
tool lightweight and comfortable ••Ideal for the removal of gasket material, surface deposits, rust, and grinding welds in tight places ••Variable speed trigger
$178.95 Save $20
$54.95 Save over 10%
SE712K
T235
••For removal of pinstripes, adhesive,
••Piezo start ••Adjustable air and gas flow ••Durable brass body with protective cover
PINSTRIPE REMOVAL TOOL
double faced tape and moldings ••Tool includes build in regulator and has a maximum 4,000 RPM ••Includes 12 eraser pads ••Disc capacity 4"
2
w w w.matcotools.com
ELECTRONIC IGNITION TORCH
makes this torch ideal for shop environments
••Applications: welding, brazing, wire soldering and silver soldering
••Use butane fuel only ••Reaches 2500°
PR
MINI SURFACE PREP TOOL KIT
Limited Edition 4s & 5s Series
32 RoaDsterPickup
'
2011 Hollywood Hot Rods速 Graphic Toolbox
Available only from Matco 5225RX-HHR2 5325RX-HHR2 5228RX-HHR2 5328RX-HHR2 4225R-HHR2 4325R-HHR2
Consult your Matco distributor for complete details.
pr
colors - Available in 4s and 5s boxes
Additional Colors - Available in 5s boxes only
Stealth Black (flat)
Sub Lime Green
Outlaw Black
Black Silver Vein
Talon Orange
Sapphire Blue
Fire Red
Titanium Green Envy
trim Options Chrome
Cad Yellow
Black
3
$21.95 Save nearly 15%
LT940
GAS TANK FUEL PUMP REMOVAL TOOL
••Removes plastic fuel pump retaining rings ••Universal adjustable design fits most plastic retaining rings ••Prevents damage to original pump retaining ring ••Use with ½" drive extension and ratchet ••Use to reinstall old retaining ring
$24.95 $24.95 Save over 10%
DT100
DIGITAL TIRE PRESSURE GAUGE
••Reads up to 100 PSI
FLD2
FUEL LINE DISCONNECT SET
••Fits all size fuel line disconnects from ¼" to 5∕8" ••One tool for straight on applications one tool for 90° applications ••Anodized aluminum ••FLD2-1-Works on disconnect sizes ¼" to 5∕8" ••FLD2-2-Works on most disconnects ¼" to 5∕8"
in .5 increments
••Automatic shut off after
15 seconds of non-use to prolong battery life ••Operating temperature range of 15° to 110° Fahrenheit
$41.95 Save over 10%
MST6438
TOYOTA/LEXUS AXLE LOCK NUT REMOVER
••Axle nut lock ring release tool for the 30mm axle nut found on many Toyota & Lexus vehicles ••Works on: Toyota Avalon 2002 and later, Camry 2002 and later, Corolla 2003 and later, Prius 2001 and later, Sienna 2002 and later, Solara 2004 and later
••Lexus ES300 2002-2003, ES330 2004-2006, ES350 2007 & later, RX300 1999-2003, RX330 2004-2006, RX350 2007 & later
$42.95
TH356
HEATER CORE BACKFLUSH TOOL
••Cooling systems backflush tool fits ½" 5∕8" and ¾" heater hoses and uses a standard garden hose for water
••Basic garden hose hook-up cleans cooling systems & heater cores without disassembly ••No need to use acids or caustic solutions. Radiator pressure cap prevents over boosting. ••Saves costly replacement of even most stubbornly clogged heater cores ••Corrosion resistant aluminum
NEW
$39.95 Save over 10%
MST9375A 6 Point
$44.95 Save 10%
••Also works with 1989 and later Corvette ZRl with the LT5 5.7L DOHC
INFLATOR GAUGE tires on trucks and buses
••Extension cap for use on passenger cars ••12" hose
••Tool allows to access oxygen sensors on LTl Gen II 5.7L HO MPFI V-8 found in the 1992 and later Corvette, 1993 and later Camaro and 1993 and later Firebird/Trans Am
A150A
••10-90 PSI inflator gauge ••Dual foot chuck for dual
SUPER 12 & 6 POINT OXYGEN SENSOR WRENCH
SFI V-8 and many domestic and foreign applications
12 Point
••Made from quality alloy steel with a black finish
$21.00 Save over 10%
WP41
41MM WATER PUMP WRENCH ••Easily adjust and hold the water pump when replacing or adjusting the timing belt ••Stubby tool design allows for easy access to timing belt sprocket without interference from vehicle frame
••Works on 1.6L engines in 2004-Current Chevrolet Aveo (excluding 2009 with variable timing engines) and 1999-2002 Daewoo Lanos
PR
4
$267.95 Save over $45
$214.95 Save nearly $25
MT1758A
MT1858
••Combines power, speed and durability for
••65 ft. lbs. of maximum torque ensures
½" IMPACT WRENCH all automotive service applications ••Working torque 40-400 ft. lbs. ••Max torque 600 ft. lbs. in reverse ••Six position power regulator allows the operator to control or reduce power in one direction while maintaining full power in the reverse direction ••Protective rubber housing and hammer case bumper protects the tool
$214.95 Save nearly $25
3∕8" COMPOSITE AIR RATCHET enough power for tough applications ••Innovative forward/reverse collar variablespeed power regulator adjustable exhaust and feather-touch trigger combine to offer unprecedented control ••Patent-pending forward/reverse collar provides unrestricted access to easily change the direction of the tool degrees which is critical in tight spaces where traditional tools get jammed
SE916K
SILVER EAGLE LONG BARREL AIR HAMMER KIT
••Positive trigger for precise control ••Longer piston stroke for more force per blow ••Built in regulator ••2,200 blows per minute ••Includes 5 chisels: 4" hammer, 6" slotted panel cutter, 6" cold chisel with 5∕8" tip, multi purpose scraper with 11∕8" tip, taper point punch with a 3∕8" point
$43.50 Save over 15%
$59.95 Save over 15%
CUP2BC
7491C
••Converts standard impact sockets
••Removes the inserts on upper control alignment
½" DRIVE IMPACT UNIVERSAL JOINT into universal impact sockets
UPPER CONTROL ARM KNOCKOUT TOOL brackets when doing front end alignments
••Services 1989-current Chevrolet and GMC ½-, 3⁄₄-, and 1-ton 2- and 4-wheel drive trucks
••Also works on 1990-current all-wheel drive Chevrolet Astro and GMC Safari vans ••New, improved design has a self-centering knockout for full punch removal with less tear
$95.50 Save over $15
SCXP3BB
3 PIECE REDUCING EXTENSION SET ••Extension adapters with ½" square driver and a drive reducing 3∕8" square male tang on the opposite end ••3 piece set in a handy storage tray ••Includes 5", 12" and 24" extensions
NEW $59.96
BDS8
8 PIECE BUSHING DRIVER SET $62.95 Save over 15%
CXP36BB
½" DRIVE IMPACT REDUCING EXTENSION ••½" square drive with a drive reducing 3∕8" square
••Sizes range from 15∕16" to 17∕8" ••7 bushing adapters and 1 driver ••Use sets to remove and insert bushings in cars, trucks, buses, tractors, construction and off-road equipment
••Sizes are stamped on each bushing adapter
male tang on the opposite end
PR
5
$19.95
PLIERS
LT998
HOSE CLAMP REMOVAL PLIERS
••Clamp pliers reach around the hose to encapsulate clamp compressing tips. ••Allows the mechanic to easily rotate the clamp to a position where he can now use his clamp removal tool or remove clamp using this tool.
NEW
$89.95 Save over 10%
SMLP3P
3 PIECE LOCKING PLIERS SET ••Set includes 3 of the most popular locking pliers: 9" hose clamp locking plier, 7" pinch off locking plier, 11" XL needle nose locking plier
••Nickel plated finish for long life and durability
$134.95 Save nearly $20
SMLP7
7 PIECE LOCKING PLIERS SET ••Contains the most popular locking pliers as a single offering
••Includes: One C-Clamp with regular tips,
curved jaw pliers with and without cutters and needle nose locking pliers
$33.95 Save over 10%
OF29700
ADJUSTABLE FILTER PLIER
••Spring-loaded, multi position pliers are made from forged 1040 alloy steel ••Cushion-grip handles ••Range 2¼" to 5 ¾"
$19.95
SP5665
ADJUSTABLE SEAL PULLER
$141.95 Save over $30
$121.95 Save over $20
OTC4579
BRS12
oil and grease seals
9 WAY SLIDE HAMMER PULLER SET
transaxles and front crankshaft seals without removing the radiator
••5 lb slide hammer ••Pulls flange type rear axles and most front wheel drive hubs ••Internal and external jaws provide a variety of
••Inserts wheel bearing race and seals
••Two and three way cross blocks and cone provide
••Includes 2 larger sizes for Dana 60/70 and Dana
••Includes a grip wrench adapter and a dent puller attachment
••Includes a pneumatic driver and longer handle ••Turn discs over to drive seals
••Head adjusts and locks in five positions to fit where clearance is a problem
••Two hook sizes remove most
••Works great on front wheel drive
combinations to pull bearings, gears and seals the perfect jaw configuration for most jobs
for sheet metal or other unique pulling requirements
without damage to race axle housing
••11 adapters and 2 driving methods, all in a handy blow molded case
80 applications fits ¾ and 1 ton trucks
w w w.ma t c o t ools.c om PR
6
PNEUMATIC BEARING RACE SEAL KIT
O
SI E V
MA
E
TC
XC LU
$21.95 Save nearly 10%
WSC1A
WORK SHEAR
••Great multi purpose scissors ••Cuts papers, plastic, rubber, leather,
cord, thick cloth, heavy fabric, upholstery, rope, cardboard, etc. ••Stainless steel blades with non-slip handles
$193.95 Save over $20
SE137
3∕8" REVERSIBLE ANGLE DRILL ••Ideal for drilling in restricted areas that require 3½" clearance ••Variable speed throttle lever and convenient reverse button ••RPMs - 1,600, .45 horsepower
$157.95 Save over $20
MT2871R
3" HEAVY DUTY REVERSING CUT-OFF TOOL ••0.8 HP motor for increased power ••Unique adjustable locking guard allows
AVIATION SNIPS ••E-Z close latch allows one hand operation ••Cuts up to 18 gauge cold rolled sheet metal ••Textured grips for greater comfort
for end user to rotate to 16 positions
••Reversing collar allows end user to
quickly switch from forward to reverse and direct sparks away from work ••Safety lever throttle ••Uses 3" cut off wheels
$20.95 Save over 10%
TS1
AVIATION RIGHT CUT SNIPS
$20.95 Save over 10% $94.50 Save over 10%
TS2
LEFT CUT SNIP
RB7KIT
7 PIECE ROTOBROACH CUTTING KIT ••Heavy duty hole cutter for use on steel, sheet metal, wood and plastic
••Cuts material up to ¼" thick using ¼", 3∕8" or ½" drills ••Spring loaded pilot guide in arbor eliminates predrilling and cutters are designed to prevent chip clogging
••Great for body shops, frame straighteners, custom
building and detailing, rustproofers and undercoaters
$83.62 Save over $20
SEXS25
25 PIECE SCREW EXTRACTOR SET ••Hex head multi-spline extractors remove broken studs, pipes, set screws, alemite fittings, etc.
$21.95 Save over 10%
1∕8" to 7∕8" in 1∕32" increments
TS3
••Fits most widely used sizes from
••Full-length flutes provide easier extractor starting ••Can be used with hand sockets and wrenches
STRAIGHT CUT SNIP
PR
7
$15.95
$97.95 Save 10%
GG30
CL16
••16 oz. capacity ••T-Handle with finger grooves for easy fill ••Black powered coated painted barrel ••12" clear flexible tube
••Rugged siphon gun for quickly removing
SUCTION GUN WITH HOSE
CLEANING / SIPHON GUN
$25.95 Save over 10%
MD113B
grease, oil and dirt. Can also be used to apply chemicals, oils and solvents. ••Also capable of functioning as an air gun ••Self cleaning unit. Design prevents fluids from backing up into working parts. ••Curved model - 16½" long ••Includes 8' of Nitrile rubber siphon hose ••Will operate without adjustment on any air pressure from 35 to 175 PSI
CIRCUIT TESTER, STRAIGHT CORD
••Designed for testing electrical circuits and
locating shorts, grounds, and open circuits
••5-foot straight heavy-duty cord ••Checks 6- and 12-volt systems ••Slim style replaceable bulb ••Positive contact-molded strain relief ••Heavy-duty, stainless steel probe with insulated shaft
••Heavy-duty clip with positive soldered connection
NEW
$129.95 Save nearly $20
MPS1500PA
¾ TON AUXILIARY STAND WITH FOOT PEDAL
$26.95
••Fast and safe technology for
CT306
professional mechanics
••Heavy gauge, steel frame helps prevent distortion or twisting ••Ideal to support the exhaust system, shock absorber and other vehicle components
CIRCUIT TESTER WITH ADAPTERS
$239.99 Save nearly $50
••Standard circuit tester with multiple
MFJ3T
options for ground source
••Contains connector to obtain ground from
3 TON QUICK-TOLOAD FLOOR JACK
standard 12V power outlet or a clamp to obtain ground from an auxiliary source ••Rated to 12V
••Quick-to-load technology offers a fast
pump to reach the desired point of lift
••Heavy gauge side frames resist twisting ••Handle connection is specially reinforced to be as firm as the one piece handle
$89.95
BRR11
2011 BATTERY REPLACEMENT RESET MANUAL ••Covers domestic and
import vehicles from 2000-2010 ••Battery access and service locations ••Battery disconnect precautions ••Power windows locks & sunroof programming ••Convenience accessory programming ••Supplemental restraint ABS system precautions ••Engine & body control system resetting
$133.95 Save nearly $15
ZC450
Z CREEPER 9 PR
••450 lbs. capacity ••All-in-one creeper/creeper seat ••Reinforced structured steel frame ••Polyurethane wheels
LIMITED QUANTITIES $34.95 Save over 20%
MRC10M
MESH QUAD CHAIR
••Matco Racing
mesh quad chair equipped with drink holder ••Chair holds up to 250 lbs.
LIMITED QUANTITIES
$89.99
AB2011TFD
MATCO TOP FUEL DRAGSTER
••2011 Antron Brown Matco Tools Top Fuel Dragster ••Custom Matco packaging
w w w.matcotools.com
E
$129.99
MATCOBAGGO
BAG TOSS GAME
O
XC LU
••Popular bag toss game customized with Matco logos ••Approximately 33" x 24" game surface ••Includes 8 bean bags PR
10
TC
SI E V
MA
NEW
FLAME SLEEVE POLO ••Great moisture wicking polo! ••This polyester polo will keep you dry and cool in the summer without sacrificing style ••Flame embroidery accent on each sleeve ••Matco Tools Racing logo on left chest M
PDMP19M
$76.95
L
PDMP19L
$76.95
XL
PDMP19XL
$76.95
XXL
PDMP19XXL
$82.95
XXXL
PDMP19XXXL
$82.95
$23.95
PDMC86
HEX IMAGE CAP
••Matco Tools logo embroidery on the front ••Screen printed hex pattern on front right panel ••Heavy brushed cotton with Velcro closure
WILD WEST TEE ••Round up the posse and
head out for the Wild West!
••This rustic but polished tee is perfect for all the cowboys!
M
PDMT89M
$21.95
L
PDMT89L
$21.95
XL
PDMT89XL
$21.95
XXL
PDMT89XXL
$24.99
XXXL
PDMT89XXXL
$25.99
$23.95
PDMC78
MATCO TOOLS SCRIPT CAP
••This cap is great for every Matco Tools fan ••Matco Tools embroidered on front with script design behind
••Matco Tools above the back opening ••Velcro closure
LADIES HEARTWRENCHED CAP SLEEVE TEE ••This Bella baby rib v-neck tee with
heart wrenched design on full front
••Classic fit with traditional v-neck, made of super soft baby rib knit
••Side-seamed, set-in cap sleeves for comfort and style
S
PDLT32S
$28.99
M
PDLT32M
$28.99
L
PDLT32L
$28.99
XL
PDLT32XL
$28.99
XXL
PDLT32XXL
$34.99
$49.95
FORDACOUPE
MODEL A CHOPPED TOP COUPE
••Matco exclusive die cast collectable ••1∕25 scale
PR
11
BASICS
Get the Technician’s Essentials. Whether you’re just starting out, or you’re a seasoned expert... These basics are essential to your set. Get back to basics!
$319.95 Save over $55
SRBIXLM62T
6 PIECE XL DOUBLE INDEXING RATCHETING WRENCH SET ••88 ratchet gear teeth produce a swing
••13 locking positions provides access to get the tough jobs done ••Zero° offset box end and index ratcheting end ••Ratcheting box-end has a swing arc of just
arc just over 4° allowing faster work in the most compact spaces ••Streamlined TearDrop Ratchet Head and long handle pattern for improved access in the most compact areas
5° to help reach tight into spots
••Sizes: 8x10mm, 11x12mm, 13x14mm, 15x16mm, 17x18mm, 19x21mm
$159.95 Save $20
CFR178LFT
½" DRIVE LOCKING FLEX RATCHET
$123.95 Save nearly $25
••Features unique 9-position
SBXY8R
locking flex-head. Locking lever ensures ratchet head maintains desired position regardless of size or applied load with the head rotating through a full 180°. ••Overall length: 17"
3∕8" 8 PIECE SAE HEX BIT SOCKET SET ••Includes the most popular 3∕8" drive chrome-plated sockets
essential for automotive, aviation, and heavy duty applications
••Set includes sizes from 1∕8" to 3∕8"
$49.95 Save over 10%
HP4LG
$119.95 Save nearly $20 $17.50 Save over 15%
4 PIECE LONG HOOK-N-PICK SET
½" DRIVE 88 TOOTH RATCHET
RTG1MB
••Comfortable 3 material Top
••Overall length: 15"
••Matco’s exclusive ergonomic handle ••Removes radiator hose from
CFR158T
RADIATOR HOSE TOOL clamps and fittings
••Pulls cotter pins ••Overall length: 9"
PR1411RED
Torque II handle shape for maximum grip and comfort ••Molded-in blade for greater strength in professional applications ••3∕16" blade with special knurling for precision handling
The products on Matco’s National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.