CONTROL PANELS AND STARTERS FOR 1 230V SINGLE-PHASE ELECTRIC PUMP WITH THERMAL PROTECTION
QMD10/...kW-T Direct start control panel for 1 single-phase electric pump with thermal protection
Single-phase panels for control of electric pumps are proposed with thermal or ammetric protection. Ammetric protection allows with a single model to cover a wider range with power from 0,37 kW to 2,2 kW. N.B: For more than one pump please contact our technical/ sales service
P
COM
A
RUN
START
CONNECTION DIAGRAM
B
GENERAL CHARACTERISTICS:
– Control panel with electronic components; – Power supply ~ 50/60Hz 230V ±10%; – Very low voltage input for external control from pressure or float switch; – Very low voltage input for pressure switch or minimum level float against dry run or too full; – Selector for pressure or minimum level float (contacts N.C.) or (contacts N.O.); – Mains pilot light; – Operating motor light; – Min-max water level alarm light; Selector for automatic-off-manual operation (the last control is not latched);
– General disconnecting switch with door lock; – External push-button for thermal protection reset; – Motor protection fuse; – Thermoplastic box – Protected to IP 50.
ELECTRONIC SPARE PARTS: – Mother board SMM1T, code 223.31; – Synoptic panel for IP55, code 316.06.
OPERATING CONDITIONS: – Ambient temperature –5 to +40°C; – Relative moisture 50% with a max temperature of 40°C.
PROTECTED TO IP55 (OPTIONAL): – Switch cover, code 644.344; – Thermal relay cover, code 879.276.
TECHNICAL DATA AND OPERATING POWERS DIMENSIONS mm A
CODE
APPROX POWER AT 230V kW
QMD10/0,37kW-4T
232.21
0,37
0,5
4A
1,5
225
255
130
QMD10/0,55kW-6T
232.22
0,55
0,75
6A
1,5
225
255
130
QMD10/0,75kW-7T
232.23
0,75
1
7A
1,5
225
255
130
QMD10/1,1kW-10T
232.24
1,1
1,5
10A
1,5
225
255
130
QMD10/1,5kW-13T
232.25
1,5
2
13A
1,5
225
255
130
QMD10/2,2kW-18T
232.26
2,2
3
18A
1,5
225
255
130
* AMD10/0,37kW-4T
232.01
0,37
0,5
4A
0,8
180
200
100
* AMD10/0,55kW-6T
232.02
0,55
0,75
6A
0,8
180
200
100
* AMD10/0,75kW-7T
232.03
0,75
1
7A
0,8
180
200
100
* AMD10/1,1kW-10T
232.04
1,1
1,5
10A
0,8
180
200
100
* AMD10/1,5kW-13T
232.05
1,5
2
13A
0,8
180
200
100
* AMD10/2,2kW-18T
232.06
2,2
3
18A
0,8
180
200
100
MODEL
APPROX POWER AT 230V Hp
THERMAL PROTECTION
WEIGHT kg
DIMENSIONS mm B
DIMENSIONS mm P
* GENERAL CHARACTERISTICS: characteristics preset and operating conditions are the same as QMD10/...kW-T, but without “general disconnecting switch with door lock”.
NOTES: the value of the power rating is indicative, for a correct choice of the model, pls-check that motor ampere absorption is within thermal protection value.
6
www.manieroelettronica.it