LED B Y D E S I G N
MODUX SERIES Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX SERIES • Advanced lighting, designed by experienced lighting specialists • Ultra efficient LED light engine with industry leading Cree™ LEDs • Plug-in LED board for simple upgrade or replacement
• Integral driver option for Modux 2 & Modux 4 to compliment 12 V AC magnetic transformer systems • IP68 fully waterproof to 1 bar (10m) rating on the majority of products • Dimmable
• Modular construction for easy maintenance • LEDShield series wiring electronic protection bypasses nonfunctioning LEDs • CoolTouch engineering means the luminaire will never be too hot to touch
• UL1838 accreditation for North America • Designed and manufactured in New Zealand • Confidence body warranty of ten years • Confidence electronics warranty of five years
All specifications outlined in this catalogue superceed any specifications described in any previously published catalogue.
MODULAR CONSTRUCTION
CoolTouch Safe operating temperature
Interchangeable optics
LEDShield Series failure protection Interchangeable LED module
Removable integral driver module ( optional )
Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX MICRO Finishes
316 Natural Copper Stainless Steel
The Modux Micro range are among the world’s smallest range of landscape luminaires available today. The reliability and convenience of the larger Modux One is shared in this range of miniature versions. Ingress rated to IP68. Powered by the 1 watt LuxR™ light engine these luminaires can also be under-driven with as little as 50mA.
LED Colours Specifications Warm White
Warm White
Neutral White
Cool White
2700ºK
3000ºK
4000ºK
5000ºK
Red
Green
Blue
Power:
1 Watt
Input Current:
< 350mA
Forward Voltage:
≈ 3V
CRI:
Ra 82
Luminaire Efficacy:
64 Lm/W @ 350mA
Luminaire Options:
Spot spike, Diamond 360º spike , Diamond 180º spike , round recessed Marker
Standards:
IP68, LM79, CE, UL1838
Light Engine:
Plug-in dimmable module equipped with the Cree® XT-E LED
Driver:
External constant current driver required, 350mA or less.
Amber
Beam
16°
37°
84°
Oval Diamond 18°+48° & Marker
1
500mm (6" for USA)
103
1
12.7 (1/2")
MODUX MICRO
MARKER+SPOT 12.7 (1/2")
22 ( 7/8" )
Modux Micro Spot, Copper
22.2 ( 7/8")
22 ( 7/8" )
Modux Micro Marker , Stainless steel
28 (1 1/8" )
22.2 ( 7/8")
28 (1 1/8" ) Modux Micro Marker , Copper
The
recessed
Marker
creates
a
low illumination to mark boundaries
Accessories:
The Modux Micro ground spikes are
•
350mA constant current remote
particularly easy to install. Simply push
driver
into the soil and orient as required.
Marker PVC canister tube
Additionally a shallow trench will easily
and edges. Ideal for timber decking installation.
Modux Micro Spot, Stainless steel
•
conceal the cabling if desired.
PART L
III
2
Ø 22mm
MODUX MICRO
DIAMOND 180 +DIAMOND 360 0
0
Modux Micro Diamond 360º, Copper
500mm (6" for USA)
160 (6 1/4")
103 (4")
Modux Micro Diamond 180º, Stainless steel
12.7 (1/2")
The Modux Micro Diamond projects
The Modux Micro Diamond 180 has a
Accessories:
light slightly upward from horizontal to
50% aperture to project light back up into
•
illuminate the underside of foliage.
foliage and box hedges without glare,
350mA constant current remote driver
illuminating pathways and viewpoints. PART L
3
III
Ø 22mm
ordering
MODUX MICRO CONFIGURATOR R
MM Material M1 micro
C A S C
copper s/steel
S D M
spot diamond marker
Colour
Beam
Flange
Driver
R R red 16˚ 37 G green 37˚ B 84 blue 84˚ 26 A 18+48 18˚+48˚ amber 180 diamond 180˚ WWW warm white 2700˚K WW warm white 3000˚K 360 diamond 360˚ 150 marker 150˚ NW neutral white 4000˚K 5000˚K CW cool white 16
remote
MODUX MICRO CONFIGURATOR
configurator WORKED EXAMPLE
MM
S
S
16
e.g. Modux Micro . Stainless steel . Spot flange . 16º beam . 3000ºK . Remote driver . Material Beam Flange
M1 micro
C A S C
copper s/steel
S D
spot diamond
16 37
R
WW
16˚
4 37˚
R G
Colour red green
Driver R
remote
Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX ONE Finishes
316 Black Natural Copper Stainless Powdercoated Steel Passivated Aluminium Lens Cover
Clear
The Modux One is a range of very compact, contemporary LED luminaires powered by a 1 Watt LuxR™ light engine. The modular design was developed to meet the challenge of delivering high quality practical accent lighting with maximum energy efficiency and a long, maintenance free life.
Frosted
LED Colours
Specifications
Warm White
Warm White
Neutral White
Cool White
2700ºK
3000ºK
4000ºK
5000ºK
Red
Green
Blue
Amber
Power:
1 Watt
Input Current:
350mA
Forward Voltage:
≈ 3V
CRI:
Ra 82
Luminaire Efficacy:
72 Lm/W @ 350mA
Luminaire Options:
Round recessed, Square recessed, Pond, Spot, Spike
Standards:
IP68, LM79, CE, UL1838
Light Engine:
Plug-in dimmable module equipped with the Cree® XT-E LED
Driver:
External constant current driver required, 350mA or less.
Beam
10°
15°
20°
30°
5
MODUX ONE
38.5 (1 1/2”)
3.5 (1/8”)
ROUND+SQUARE RECESSED
Modux One Round, Stainless steel
43 (1 3/4”)
3.5 (1/8”)
38.5 (1 1/2”)
38.5 (1 1/2”)
3.5 (1/8”)
31 (1 1/4”)
Modux One Square, Stainless steel
43 (1 3/4”)
31 (1 1/4”)
31 (1 1/4”)
42 (1 3/4”)
The Modux One recessed luminaires are
and stairways. Suitable for outdoor and
Accessories:
designed to be mounted either in the
indoor installation.
•
PVC Mounting canister
•
350mA constant current remote
ground/floor as low profile uplighters,
driver
or in walls or steps to illuminate paths
PART L
6
III
Ø 34.5mm
3.5 (1
3.5 (1
SPOT+WEIGHTY BASE+BRACKET+SPIKE 77 (3”)
38.5 (1 1/2”)
42 (1 3/4”)
31 (1 1/4”)
42 (1 3/4”)
3.5 (1/8”)
42 (1 3/4”)
Modux One Spot on a bracket, Stainless steel
77 (3”)
77 (3”)
Modux One spot on a weighty base, Stainless steel
38.5 (1 1/2”)
38.5 (1 1/2”)
3.5 (1/8”)
45 (1 3/4”)
175 (7”)
38.5 (1 1/2”)
MODUX ONE
42 (1 3/4”)42 (1 3/4”)
(1 1/4”) 45 (1 3/4”)45 (1 3/4”)
Modux One spot on a Spike, Stainless steel
42 (1 3/4”)42 (1 3/4”)
The Modux One Pond, Spot and Spike
be installed underwater. The Spot can
luminaires are miniature spotlights with
be mounted to any solid surface and the
a swivel bracket that provides for 90° of
Spike is designed to be inserted directly
elevation adjustment. The Pondlight has
into the ground.
Accessories: •
350mA constant current remote driver
a weighty solid base and is designed to
(7”)
7
(7”)
PART L
III
Ø 34.5mm
MODUX ONE
25.4 (1") 52 (2")
WAYFINDER Modux One Wayfinder, Copper
This one inch diameter miniature pole
The Cree 1 Watt max LED can be easily replaced if required
light produces plenty of light in an
or substituted for a colour LED.
asymmetric wash, without glare.
Accessories:
Precision machined in marine grade 316
•
12VAC, 12-24VDC integrated driver (Q1 release 2016)
stainless steel, copper or powdercoated
•
240VAC integrated driver (Q1 release 2016)
aluminium, the luminaire achieves IP68
•
350mA remote driver
water ingress rating for piece of mind.
8
PART L
III
Ø 34.5mm
215 (8”)
600 (24")
Modux One Wayfinder, Copper, Stainless, Aluminium
ORDERING
MODUX ONE CONFIGURATOR M1 Material
Power M1
1 Watt
A C S
Lens Cover
Flange
aluminium copper s/steel
R S SP WF
round square spot wayfinder *
C F
clear frosted
Colour
Beam 10 15 20 30
10˚ TIR 15˚ TIR 20˚ TIR 30˚ TIR
* Only Colour option applicable
Mount
Driver
R red green B blue A amber WWW warm white 2700˚K WW warm white 3000˚K NW neutral white 4000˚K CW cool white 5000˚K R
remote
R B
G
BS WB
recessed bracket bracket & spike weighty base
WORKED EXAMPLE MODUX ONEconfigurator CONFIGURATOR
M1
S
SP
C
10
WW
R
BS
e.g. Modux One . Stainless steel . Spot flange . Clear lens, 10º beam . 3000ºK . Remote driver . Bracket + spike Material Lens Cover Colour Power Driver Beam Flange M1
1 Watt
A C
aluminium copper
R S
round square
9C F
clear frosted
10 15
10˚ TIR 15˚ TIR
R G
red green
R
remote
Mount R B
recesse bracke
Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX TWO Finishes
316 Black Natural Copper Stainless Powdercoated Steel Passivated Aluminium
Modux Two is a range of mid-size, contemporary LED luminaires powered by a 2 watt
Lens Cover
LuxR
™
light engine that offers a wide choice of LED colours. The modular design was
developed to meet the challenge of delivering high quality practical accent lighting with maximum energy efficiency and a long, maintenance-free life. Clear
Frosted
Specifications
Hexcell
LED Colours
Warm White
Warm White
Neutral White
Cool White
2700ºK
3000ºK
4000ºK
5000ºK
Red
Green
Blue
Amber
Power:
2 Watt
Input Current:
700mA
Forward Voltage:
≈ 3V
CRI:
Ra 82
Luminaire Efficacy:
66 Lm/W @ 700mA
Luminaire Options:
Round recessed , Square recessed , Louvre recessed , Path recessed , Step recessed , Pond , Spot , Spike Spot, Wall washer recessed, Squarelight recessed, Large Square/Louvre/Round.
Standards:
IP68, LM79, CE, UL1838
Light Engine:
Plug-in dimmable module equipped with the Cree® XT-E LED
Driver:
integral 12VAC driver or external remote driver. Note: Luminaire consumes approximately 3.2W with 700mA integral driver, and 5.6W with 1100mA integral driver.
Beam
8° TIR
26° 74° -- Reflectors --
Wall washer Path & Oval TIR Step & 15°+40° Squarelight (round flange only)
10
MODUX TWO
Accessories:
with excellent vertical beam uniformity.
•
3.5 (1/8”) 1 53 (253 /16(2 ”) 1/16”)
5 41 (141 /8”) (1
Plug-In 12 Volt AC integral driver, 700mA max
50mm diameter PVC mounting canister 700mA or 1050mA constant current remote driver
11
PART L
III
Ø 43.5mm
11 ( 1/2”)
•
•
11 ( 1/2”)
3.5 (1/8”)
Suitable for Modux 2 Round flange only.
3.5 (1/8”)
The Modux Two Wall Washer features a
uniform illumination on vertical surfaces.
Modux Two Wall Washer, Stainless steel
5 41 (141 /8”) (1 5/8”)
precision rectangular wall-washing optic The asymmetrically tilted beam ensures
68 (2 11/16”)
3.5 (1/8”) 68 (2 11/16”)
3.5 (1/8”)
75 (3”) 75 (3”)
5 41 (141 /8”) (1 5/8”)
11 ( 1/2”)
58 (258 /16(2 ”) /16”)
68 (2 11/16”)
68 (2 11/16”)
3.5 (1/8”)
WALL WASHER (MkII)
12
Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX FOUR Finishes
316 Black Natural Copper Stainless Powdercoated Steel Passivated Aluminium
Modux Four is a range of mid-size, contemporary LED luminaires powered by a 4 watt
LuxR™ light engine that offers white colours only. The modular design was developed
Lens Cover
to meet the challenge of delivering high quality practical accent lighting with maximum energy efficiency and a long maintenance free life.
Clear
Frosted
Hexcell
Specifications
LED Colours
Warm White
Warm White
Neutral White
Cool White
2700ºK
3000ºK
4000ºK
5000ºK
Beam
12° TIR
26° 36° 74° - - - - - - Reflectors - - - - - -
Power:
4 Watt
Input Current:
700mA
Forward Voltage:
≈ 6V
CRI:
Ra 83
Luminaire Efficacy:
83 Lm/W @ 700mA
Luminaire Options:
Round recessed , Square recessed , Louvre recessed , Path recessed , Step recessed , Pond , Spot , Spike Spot, Squarelight recessed, Large Square/Louvre/Round.
Standards:
IP68, LM79, CE, UL1838
Light Engine:
Plug-in dimmable module equipped with the Cree® MTG LED
Driver:
Integral 12V AC driver or external remote driver. Note: Luminaire consumes approximately 5.2W with 700mA integral driver.
Path & Step & Squarelight
13
MODUX TWO & FOUR
3.5 (1/8”)
75
7575 (3”) (3”)
5 5 4141 (1(1 /8”) /8”)
5 5 4141 (1(1 /8”) /8”)
3.5 (1/8”) 68 (2 11/16”) 68 (2 11/16”) 68 (2 11/16”)
5858 (2(2/16/”) 16”)
68 (2 11/16”)
68 (2 11/16”) 68 (2 11/16”)
3.5 (1/8”)
3.5 (1/8”) 3.5 (1/8”)
5 41 (141 /8”) (1 5/8”)
3.5 (1/8”) 3.5 (1/8”)
58 (258 /16(2 ”) /16”)
Modux Two & Four Round, Stainless Steel
68 (2 11/16”)
68 (2 11/16”)
3.5 (1/8”)
ROUND RECESSED
Modux Two & Four Large Round, Stainless Steel
The
Modux
Two
&
Four
recessed
Now available in a larger format flange
• 700mA constant current remote 5 5 58 (258 /driver 16(2 ”) 5/16”) 41 (141 /8”) (1 5/8”)
58 (2
holes.
•
Plug-In 12 Volt AC integral driver
uplighters, or in walls or steps to illuminate
Accessories:
•
Hexcell louvre available
paths and stairways.
•
50mm diameter PVC mounting canister
14
PART L
11 ( 1/2”) 11 ( 1/2”)
style to better cover unsightly mounting
either in the ground/floor as low profile
3.5 (1/8”) 3.5 (1/8”)
luminaires are designed to be mounted
III
Ø 43.5mm
MODUX TWO & FOUR
&
Four
recessed
3.5 (1/8”)
style to better cover unsightly mounting
either in the ground or floor as low profile
holes.
uplighters, illuminate (2 /16”) 41 (1 5/8”) or in walls or steps to58
Accessories: 41 (1 /8”)
3.5 (1/8”)
41 (1 5/8”)
700mA constant current remote driver Plug-In 12 Volt AC integral driver
5 • Hexcell louvre available 58 (2 5/16”) 41 (1 /8”)
5
•
• •
50mm diameter PVC mounting canister
15
11 ( 1/2”)
11 ( 1/2”)
paths and stairways. T
68 (2 11/16”)
11 ( 1/2”)
Now available in a larger format flange
luminaires are designed to be mounted 5
41 (1 5/8”)
61 (2 3/8”)
41 (1 5/8”)
Modux Two & Four Large Square, Stainless Steel
Two
53 (2 1/16”)
PART L
58 (2 5 11 ( 1/2”)
53 (2 1/16”)
41 (1 5/8”) Modux
3.5 (1/8”)
11 ( 1/2”)
68 (2 11/16”)
64 (2 1/2”)
68 (2 11/16”)
3.5 (1/8”)
3.5 (1/8”)
41 (1 5/8”)
64 (2 1/2”)
75 (3”)
68 (2 11/16”)
Modux Two & Four Square, Stainless Steel
41 (1 5/8”)
The
68 (2 11/16”)
3.5 (1/8”)
68 (2 11/16”)
68 (2 11/16”)
3.5 (1/8”)
SQUARE RECESSED
III
Ø 43.5mm
MODUX TWO & FOUR
This Louvre model shields the light
Accessories:
at
•
angle
to
eliminate
glare.
Intended for step or wall illumination.
41 (1 5/8”)
58 (2 5/16”)
Now available in a larger format flange style
canister •
11 ( 1/2”)
to better cover unsightly mounting holes.
* Louvre is supplied with a frosted lens
41 (1 5/8”)
53 (2 1/16”)
700mA constant current remote driver
•
3.5 (1/8”) 3.5 (1/8”) 71 (2 3/4”)
11.5 (1/2”) 61 (2 3/8”)
41 (1 5/8”)
50mm diameter PVC mounting
11.5 (1/2”)
45°
68 (2 11/16”)
11 ( 1/2”) 41 (1 5/8”)
Modux Two & Four Large Square, Stainless Steel
a
41 (1 5/8”)
3.5 (1/8”)
3.5 (1/8”) 68 (2 11/16”)
11 ( 1/2”) 64 (2 1/2”)
53 (2 1/16”)
41 (1 5/8”)
(2 3/8”)
53 (2 1/16”)
41 (1 5/8”)
61 (2 3/8”)
71 (2 3/4”)
41 (1 / ”)
Modux Two & Four5 Square, Stainless Steel 8
64 (2 1/2”)
/16”)
1
71 (2 3/4”)
3.5 (1/8”)
68 (2 11/16”)
68 (2 11/16”)
3.5 (1/8”)
LOUVRE+LARGE LOUVRE
Plug-In 12 Volt AC integral driver
and 74 degree wide beam only.
16
41 (1 5/8”) PART L
III
Ø 43.5mm
61
58 (2 5/16”)
41 (1 5/8”)
68 (2 11/16”)
11 ( 1/2”)
64 (2 1/2”)
41 (1 5/8”)
68 (2 11/16”)
11 ( 1/2”)
64 (2 1/2”)
53 (2 1/16”)
41 (1 5/8”)
41 (1 5/8”)
1
3.5 (1/8”)
3.5 (1/8”) 68 (2 11/16”)
3.5 (1/8”)
STEP+STEP with SLOT
68 (2 11/16”)
(3”)
2 5/16”)
MODUX TWO & FOUR
41 (1 5/8”)
61 (2 3/8”)
58 (2 5/16”)
41 (1 5/8”)
58 (2 5/16”)
41 (1 5/8”)
/16”)
5
41 (1 5/8”)
58 (2 5/16”)
41 (1 5/8”)
11 ( 1/2”) 64 (2 1/2”)
64 (2 1/2”)
64 (2 1/2”)
11 ( 1/2”)
11 ( 1/2”)
Modux Two & Four Step, Stainless Steel
5
Modux Two & Four Step with Slot, Stainless Steel
The Modux Two & Four recessed Steplight
Accessories:
models are designed to be mounted in the
•
ground to illuminate paths, or wash walls and steps. They feature a glass optic that
canister •
orients light 5º below the horizon and 10º above. These offer extremely low glare in
50mm diameter PVC mounting 700mA constant current remote driver
•
Plug-In 12 Volt AC integral driver
almost all applications.
17
PART L
III
Ø 43.5mm
3.5 (1/8”)
3.5 (1/8”)
MODUX TWO & FOUR
11 ( 1/2”)
68 (2 11/16”)
58 (2 5/16”)
41 (1 5/8”)
41 (1 5/8”)
41 (1 5/8”)
11.5 (1/2”)
58 (2 5/16”)
53 (2 1/16”)
41 (1 5/8”)
61 (2 3/8”)
41 (1 5/8”)
64 (2 1/2”)
53 (2 1/16”)
68 (2 11/16”)
68 (2 11/16”)
3.5 (1/8”)
PATH+SQUARELIGHT RECESSED
58 (2 5/16”)
41 (1 5/8”)
68 (2 11/16”)
11 ( 1/2”) 64 (2 1/2”)
64 (2 1/2”)
11 ( 1/2”)
Modux Two & Four Path, Stainless Steel
58 (2 5/16”)
41 (1 5/8”)
53 (2 1/16”)
41 (1 5/8”)
Modux Two & Four Squarelight, Aluminium
The
Modux
Two
&
Four
recessed
These offer extremely low glare in almost
Accessories:
Pathlight and Squarelight models are
allapplications.
•
50mm PVC mountingcanister
designed to be mounted in the ground
Custom Path flange apertures available
•
700mA constant current remote
to illuminate paths, and wash walls. They
by special request.
feature a glass optic that orients light 5º
driver •
below the horizon and 10º above.
Plug-In 12 Volt AC integral driver PART L
18
III
Ø 43.5mm
MODUX TWO & FOUR
SECURITY CANISTER Pair of collets
60
Hex key
58
Optional Ø50mm PVC
canister
Modux Two & Four Step, Stainless Steel
recessed
PVC retaining collets prevent the luminaire
Suitable for Modux 2 & 4 models:
Security Canister is constructed of PVC.
The
Modux
Two
&
Four
from being removed fully unless the two
•
Round, Square, Louvre
The canister is to be cast or bonded into
stainless steel set-screws are extracted.
•
Large Round, Square, Louvre
the ground or wall, and is completely
The Modux body lip seal prevents water
•
Step, Path, Squarelight
concealed by the luminaire’s round
ingress.
Accessories:
flange.
•
50mm diameter PVC mounting canister
19
Modux Step , Stainless steel
20
Modux Path , Copper
MODUX TWO & FOUR
#6 x 5/8”
90 Deg
90 (3 1/2”)
102 (4”)
90 Deg
90 (3 1/2”)
71 (2 3/4”)
71 (2 /4”)
3.5 (1/8”)
16
SPOT+WEIGHTY BASE+BRACKET+SPIKE
90 Deg 41 (1 5/8”)
175 (6 7/8”)
102 (4”)
90 Deg
90 (3 1/2”)
16
3.5 (1/8”)
90 Deg
90 (3 1/2”) 90 (3 1/2”)
102 (4”)
71 (2 3/4”)
90 Deg
Modux Four Spot on a bracket, Stainless steel
90 Deg 41 (1 /8”) 5
Modux Four spot on a Spike, Stainless steel
Modux Two & Four Pond, Spot and
the Spike is designed to be inserted
Spike luminaires are mid-size spotlights
directly into the ground.
with a swivel bracket that provides 90’
Accessories:
elevation adjustment. The Pondlight has
•
a weighted base and is designed to be installed underwater. The Spot can be screw mounted to any hard surface and
700mA
constant
current
remote
driver
•
Plug-In 12 Volt AC integral driver
•
Hexcell louvre available
21
PART L
III
Ø 43.5mm
175 (6 7/8”)
61 (2 /8”) 3
175 (6 7/8”)
Deg
71 (2 3/4”)
3.5 (1/8”)
Modux Four spot on a weighty base, Stainless steel
#6 x 5/8”
61 (2 3/8”)
MODUX TWO & FOUR
WALL+CEILING CANISTER GLARE GUARD 54 (2 1/8”)
Modux Two Glare Guard on a Spike, Copper
The Glare Guard can be adapted to any
Wall and ceiling mount spring canister for Modux
Modux Two & Four Pond, Spot, and Spike
Two & Four. Required cut-out is 54mm diameter.
fitting. This can be used in combination
**This product is classed as an accessory.
with a hexcell Louvre baffle if required. The Glare Guard features a friction fit adjustable hood, and flush fitted glass to
Ø 54mm Ø 11/8”
prevent water pooling.
22
ORDERING
MODUX TWO CONFIGURATOR M2 M2
Power
Material
Flange
2 Watt
aluminium copper s/steel
C round clear F square frosted H louvre * hexcell large round large square large louvre * spot glare guard wall washer * path light * step light * step light with slot * squarelight *
A C S
R S L LR LS LL SP GG WW PL SL SLS SQ2
Lens Cover
Colour
Beam
8˚ TIR 26˚ 74 74˚ 15 + 40 oval TIR 8
26
I red R green B blue A amber WWW warm white 2700˚K WW warm white 3000˚K NW neutral white 4000˚K 5000˚K CW cool white R
G
Mount
Driver integral remote
bracket bracket & spike recessed weighty base
B BS R WB
* Only Colour and Driver options are applicable
MODUX FOUR CONFIGURATOR M4 Power M4
4 Watt
A C S
Material
Flange
aluminium copper s/steel
C round clear F square frosted H louvre * hexcell large round large square large louvre * spot glare guard path light * step light * step light with slot * squarelight *
R S L LR LS LL SP GG PL SL SLS SQ2
Lens Cover
Beam 12 26 36 74
12˚ TIR WWW warm white 2700˚K WW warm white 3000˚K 26˚ 36˚ NW neutral white 4000˚K 5000˚K 74˚ CW cool white
I R
* Only Colour and Driver options are applicable
23
Mount
Driver
Colour
integral remote
B BS R WB
bracket bracket & spike recessed weighty base
Contemporary modular light fixtures powered by the LuxR™ light engine
MODUX V1 Finishes
Natural Anodised Silver
White Black Powdercoated Powdercoated Passivated Passivated Aluminium Aluminium
Lens Cover
The LuxR Modux V1 Recessed Downlight is a small low-voltage dimmable indoor/outdoor light. Designed for recessing low down into walls to project an asymmetrical wash across paths and steps. It combines an ultra discreet profile without glare and an IP65 ingress protection rating. Two retaining options are available.
Frosted LED Colours
Specifications
Warm White
Warm White
Neutral White
Cool White
2700ºK
3000ºK
4000ºK
5000ºK
Red Beam
Green
Blue
Amber
Power:
1 Watt @ 350mA
Input Current:
<500mA or less
Forward Voltage:
≈ 3V
CRI:
Ra 82
Luminaire Efficacy:
72 Lm/W @ 350mA
Luminaire Options:
Round recessed, Square recessed, Pond, Spot, Spike
Standards:
IP65, LM79, CE,
Light Engine:
Replaceable dimmable module equipped with the Cree® XT-E LED
Driver:
External constant current driver required.
Wash
24
V1
69 (2 3/4")
81 (3 1/4")
V1SPRING+CLIP
31 (1 1/4")
36 (1 3/8")
Precision machined from aluminium the
The spring clips and leaf clip are made
Optional 316 stainless steel canister
V1 is available in natural anodised satin
in marine grade 316 stainless steel for
dimensions: L=80 x W=28 x H=74mm
silver, or in E-Coat matte powdercoat
longevity.
with 20mm cable entry hole.
colours. Ask your local agent for details. PART L
25
III
ORDERING
V1 CONFIGURATOR R
V1 Finish M1 V1
A PB C PW
Colour
Fixing
anodised silver powdercoat black powdercoat white
CS LS LSC 26
coil springs leaf spring leaf spring + canister
G
V1 CONFIGURATOR configurator WORKED EXAMPLE
V1
A
LSC
R
WW
e.g. V1 . Anodised silver . Spot flange . Clear lens, 10º beam . 3000ºK . Remote driver Finish Colour Driver Fixing
M1 V1
A
anodised silver
CS
coil springs
R
red 26
Driver
red green B blue A amber WWW warm white 2700˚K WW warm white 3000˚K NW neutral white 4000˚K 5000˚K CW cool white R
R
remote
R
remote
Contemporary modular light fixtures powered by the LuxR™ light engine
ACCESSORIES integral driver
canisters
REMOTE DRIVER
Modux 2 & 4 Integral driver module Modux 1 : Ø 40mm x 200mm
Input Power:
LUXR-MP15 remote driver
LUXR-CLK Remote drivers
Modux 2 : Ø 50mm x 200mm
(12VAC,12-24VDC available Q1, 2016)
Input Power:
Input Power:
Modux 4 : Ø 50mm x 200mm
Output Current: 700 mA
Output Current: 60-360mA
Output Current: 700/1050mA
Output Power:
Output Power:
Output Power:
12 VAC
4W
240 VAC 1-15 W
240 VAC 2-10 W
Recessed Mounting Canisters LuxR PVC mounting canisters simplify the installation of Modux recessed luminaires. Designed to be mounted in the wall or ground. The luminaire is easily pushed inside the canister and is held in place with its silicon rubber lip seal. Not UL approved for North America.
50
200
50
200
Integral Driver LuxR offers an integral UL approved 700mA 12V AC phase dimmable driver for the Modux Two & Four models, enabling the luminaire to be easily connected to an approved 12 volt AC remote transformer. New improved version to be released Q1, 2016.
40
200
40
200
Remote Driver LuxR offers a small range of external remote drivers perfectly suited for Modux power supply requirements. LuxR remote drivers allow several luminaires to be connected to a single remote driver using SERIES WIRING. If you are not completely familiar with series wiring procedures please be sure to check with your distributor or a qualified LED installer.
27
Contemporary modular light fixtures powered by the LuxR™ light engine
ENVIRONMENT LuxR is committed to creating premium-quality, contemporary LED luminaires that will endure the test of changing tastes and trends, while keeping pace with constant advances in lighting technology. We believe that the building industry must play an important role in reducing the negative impact of construction activity and, at the same time, assist people to realise their desires for increasingly improved living and work environments. LuxR delivers on that belief by designing lighting solutions that are contemporary, effective, long lasting, and that help our customers to minimise the waste of resources. •
LuxR products are easily disassembled and all parts are recyclable.
•
We minimise the number of different types of material used in each product for simplified recycling
•
We do not use environmentally harmful coatings, such as chrome plating.
•
All our metal selections are easily recyclable.
•
Our copper products have a natural “living” finish, developing a patina that evolves over time. We can offer an accelerated patina aged-finish on request.
•
Our aim is to source as many materials and processors as possible from within a 20 kilometre radius of our manufacturing plant in Auckland, New Zealand.
•
Our packaging is made primarily of paper derived materials, including as much post-consumer recycled content as commercially possible.
•
LuxR will continue to explore options for further reducing the environmental impact of our manufacturing processes.
28
Contemporary modular light fixtures powered by the LuxR™ light engine
INSTALLATION To preserve the validity of your warranty and ensure the long
In Order to remove the residual voltage, short circuit the
term performance of your LuxR products, it is critical to follow
contacts on the secondary output with the driver turned off.
the correct installation procedures
•
Your distributor will be happy to provide you with advice and
be immediately obvious, therefore it is important to plan
any additional information you may need.
and check your install before you start.
Please note these important tips: •
An LED can be damaged in an instant, and this may not
•
Remote drivers most commonly use SERIES WIRING, in
When the device has been switched off, there is
which the LED luminaires are connected in a chain. If you
some temporary voltage remaining on the secondary
are not completely familiar with series wiring procedures
output,
which
decomposes
within
about
10
please be sure to check with your distributor or a qualified
minutes. At this stage, no LEDs may be connected.
LED installer.
CARE+REFINISHING LuxR recommends the following cleaning methods only:
Living Finishes
If you’re unsure of what finish you have for any reason, please
Natural copper body components: It is not essential that
get in touch and supply some images.
these finishes are cleaned as they will continue to patina
Do not use oven cleaner under any circumstances
over time Wipe over with a damp soft cloth or chamois with detergent
Black finishes
and water. When dry, a liquid furniture creme polish such
Black powdercoat, Black anodising, black 316 stainless steel
as Neopol3 or Pledge Shine-Up4 can be applied, and the
e.g. fasteners:
excess wiped off, which will even out and darken the natural
Wipe over gently with a damp soft cloth or chamois and a non
patina slightly.
abrasive cleaner.
Do not use metal polishing compounds like Brasso, Autosol 1,
Do not use metal polishing compounds like Brasso
etc
Autosol2
etc
Refinishing Stainless Steel
Refinishing is a straightforward process for all, except black
316 marine grade stainless steel bodies and silver fasteners:
finishes.
Scrub with a nylon brush, detergent and water.
Contact LuxR to discuss in detail.
Specialist stainless steel brightening gels are available but be aware that they are highly corrosive to other surfaces. 1 Brasso is a trademark of Reckitt Benckiser Plc (UK) 2 Autosol is a trademark of Autosol LLC (USA)
29
3 Neopol is a trademark of Bushland Products Pty Ltd (AUS) 4 Pledge Shine-Up is a trademarks of S. C. Johnson & Son (USA) It is also known as Pronto, Pliz and Blem
Contemporary modular light fixtures powered by the LuxR™ light engine
WARRANTY The LuxR Confidence Warranty overview:
LuxR products are manufactured from the highest quality materials and are designed to provide many years of reliable service when correctly installed. Our modular construction ensures that all components, including the LED Board and Internal Driver, can be easily disassembled for maintenance. Our confidence in the quality of our products is demonstrated by the comprehensive warranty that comes with all LuxR luminaires:
Confidence Body Warranty Copper and stainless steel body and flanges on all LuxR Modux luminaires have a 10 year warranty against defective workmanship and deterioration while the aluminium body and flanges have a 5 year warranty. Both warranties are subject to standard conditions listed below:
Confidence Electronics Warranty The electronic components in all LuxR Modux luminaires have a 5 year warranty against defective workmanship and failure, subject to standard conditions listed below: Standard Conditions: •
The environment in which the fixture is to be installed must be considered carefully when selecting the finish. Solid copper and stainless steel fixtures are recommended for corrosive environments such as near salt water. Aluminium fixtures may not be covered by the full warranty in these situations.
•
Stainless Steel requires regular cleaning in salt air environments.
•
Warranty excludes impact damage (except for lenses), incorrect installation and incorrect re-assembly. Fixtures must be kept properly maintained, including replacement of gaskets whenever they are serviced.
•
LuxR reserves the right to replace components or provide remedial repair service in certain situations where appropriate. These situations may include the following: - Minor problems, directly attributable to manufacturing defects, which are easily fixed in-field. - Installations where removal of the fixtures is not practically feasible.
•
LuxR Limited reserves the right to limit liability on nonstandard fixtures or delivery arrangements.
30
Contemporary modular light fixtures powered by the LuxRâ&#x201E;˘ light engine
NOTES
31
Proudly made in New Zealand
www.luxrled.com LuxR Limited Head Office 130 Felton Matthew Avenue Glen Innes,1072 , Auckland New Zealand email sales@luxrled.com
V3