Portavant 120 product list by Moneygall Glazing Accessories Ltd (GlassParts.co.uk)

Portavant

Glass fittings with logic

Innovation!

COMFORT STOP

AUTO CLOSE

DESIGN SELECT

Smooth cushioning, gentle closing

General notes: Complete sets: The complete sets include the following number of Comfort STOP and AUTO CLOSE cushioning and self-closing mechanisms, in line with your requirements, and they are identified by the following icons: - 1 per sash for cushioning on one end - 2 per sash for cushioning on both ends - Without cushioning. We deliver the profiles for the complete sets together in shock resistant cardboard packaging. Profiles: If you sent us your order structured glass sliding door by glass sliding door, the track profiles and cover profiles will be packed, belonging to each sliding door, in pairs in shock resistant packing. In any other case, Willach reserves the right to pack the profiles in the best way to ensure a safe transport. All prices are gross prices in â&#x201A;Ź EX WORKS, according to Incoterms 2000, incl. packaging, without VAT or any other duties, levies and fees that might arise in your country. Subject to modification. Price list 06/2010

Portavant

Glass fittings with logic

Choose the method of ordering which suits you best.

Use the already ready-to-use sets for your Portavant systems.

Complete sets with the required system components such as tracks, cover profiles, accessory kits and choice of cushioning option.

Add optional accessories and handles to the complete sets to meet the requirements of your installation.

Use the “Complete set” tab to compile your order.

Add optional accessories and handles to the individually combined single components to meet the requirements of your installation.

Use the “Single components” tab to compile your order.

Order option 1 Single components

Combine single components individually for your Portavant systems.

Order option 2

• Tracks • Cover profiles • Additional profiles such as floor-wall and ceiling profiles • Accessory kits • Accessories such as end plates & hair-bristle lining

Portavant

Glass fittings with logic

Select the Portavant solution to meet your needs in only three steps, using our complete sets.

Select complete set

Select installation situation, determine measurements.

Complete sets

Select optional accessories

1. Step: Select installation situation, determine measurements.

one sash

pages 5-8

two sashes

pages 9 - 12

one sash

pages 13 - 16

Track fixed to wall

Track fixed to ceiling without side-light

two sashes

pages 17 - 20

Track fixed to ceiling with side-light

Installation in glass facade

one sash

pages 21 - 26

two sashes

pages 27 - 32

one sash

pages 33 - 41

Portavant

Glass fittings with logic

Determination of measurements: track fixed to wall, systems with 1 sash

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Clear width (building) = LW =

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass width A = LW + 70 =

Calculation of glass height H1 = R - 43 =

Calculation of sash weight (kg)

Calculation of profile length (track & cover profile) C=Ax2=

Length of track & cover profile for your Portavant system Track fixed to wall 1 sash

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 = Number of possible cushioning systems as set out table

Maximum number of cushioning systems for your Portavant system

Track fixed to wall 1 sash

Complete sets: track fixed to wall, 1 sash, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to wall 1x per sash

1x straight cover profile

cut to size in mm

1x accessory kit II „straight cover profile“

Product number

Execution

Unit

617 012.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 012.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 012.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. Recommendation: hair-bristle lining (see p. 8).

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to wall 2x per sash

1x straight cover profile

617 112.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 112.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „straight cover profile“ 1x complementary accessory kit A

Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. Recommendation: hair-bristle lining (see p. 8).

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to wall 1x straight cover profile Without

cut to size in mm

1x accessory kit I „straight cover profile“

617 212.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 212.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 212.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 8).

Portavant

Glass fittings with logic

Complete sets: track fixed to wall, 1 sash, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to wall 1x per sash

1x rounded cover profile

cut to size in mm

1x accessory kit II „rounded cover profile“

Product number

Execution

Unit

617 010.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 010.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 010.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to wall 2x per sash

1x rounded cover profile

617 110.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 110.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „rounded cover profile“ 1x complementary accessory kit A

Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. Recommendation: hair-bristle lining (see p. 8).

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to wall Without

1x rounded cover profile

cut to size in mm

1x accessory kit I „rounded cover profile“

617 210.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 210.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 210.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 8).

Track fixed to wall 1 sash

Accessories Figure

Do you want to add a hair-bristle lining to your system?

Product description Hair-bristle lining

8 Profile length

Product number

617 253.0000.315

Execution

Unit

List price

for cover profiles and track profiles packing unit = 20 m

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the â&#x20AC;&#x153;handlesâ&#x20AC;? tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: track fixed to wall, systems with 2 sashes

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Clear width (building) = LW =

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass width

Calculation of glass height H1 = R - 43 =

Calculation of sash weight (kg)

A = LW/2 + 33 =

Calculation of profile length (track & cover profile) C=Ax4+4=

Length of track & cover profile for your Portavant system Track fixed to wall 2 sashes

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 = Number of possible cushioning systems as set out table

Maximum number of cushioning systems for your Portavant system

Track fixed to wall 2 sashes

Complete sets: track fixed to wall, 2 sashes, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x per sash

1x track profile for track fixed to wall

cut to size in mm

1x straight cover profile 2x accessory kit II „straight cover profile“

10 Product number

Execution

Unit

617 012.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 012.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 012.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. Recommendation: hair-bristle lining (see p. 12).

5996 mm

Complete set, 2 sashes 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 1x track profile for track fixed to wall 2x per sash

EV 1

1 unit

.120

C 31

1 unit

617 112.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x straight cover profile 2x accessory kit II „straight cover profile“ 2x complementary accessory kit A

Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. Recommendation: hair-bristle lining (see p. 12).

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to wall Without

617 112.5996.110

1x straight cover profile

cut to size in mm

2x accessory kit I „straight cover profile“

617 212.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 212.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 212.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 12).

Portavant

Glass fittings with logic

Complete sets: track fixed to wall, 2 sashes, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x per sash

1x track profile for track fixed to wall

cut to size in mm

1x rounded cover profile 2x accessory kit II „rounded cover profile“

Product number

Execution

Unit

617 010.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 010.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 010.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

5996 mm

Complete set, 2 sashes 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 1x track profile for track fixed to wall 2x per sash

EV 1

1 unit

.120

C 31

1 unit

617 110.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x rounded cover profile 2x accessory kit II „rounded cover profile“ 2x complementary accessory kit A

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to wall 1x rounded cover profile Without

617 110.5996.110

cut to size in mm

2x accessory kit I „rounded cover profile“

617 210.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 210.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 210.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 12).

Track fixed to wall 2 sashes

Accessories Figure

Do you want to add a hair-bristle lining to your system?

Product description Hair-bristle lining

12 Profile length

Product number

617 253.0000.315

Execution

Unit

List price

for cover profiles and track profiles packing unit = 20 m

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the â&#x20AC;&#x153;handlesâ&#x20AC;? tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: track fixed to ceiling, systems with 1 sash

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Clear width (building) = LW =

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass width

Calculation of glass height H1 = R - 43 =

Calculation of sash weight (kg)

A = LW + 70 =

Calculation of profile length (track & cover profile) C=Ax2=

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 = Number of possible cushioning systems as set out table

Length of track & cover profile for your Portavant system Track fixed to ceiling 1 sash

Maximum number of cushioning systems for your Portavant system

Track fixed to ceiling 1 sash

Complete sets: track fixed to ceiling, 1 sash, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x per sash

1x straight cover profile

cut to size in mm

1x accessory kit II „straight cover profile“

14 Product number

Execution

Unit

617 022.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 022.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 022.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to ceiling 1x straight cover profile 2x per sash

617 122.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 122.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „straight cover profile“ 1x complementary accessory kit A

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling Without

1x straight cover profile

cut to size in mm

1x accessory kit I „straight cover profile“

617 222.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 222.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 222.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 16).

Portavant

Glass fittings with logic

Complete sets: track fixed to ceiling, 1 sash, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile 1x per sash

cut to size in mm

1x accessory kit II „rounded cover profile“

Product number

Execution

Unit

617 020.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 020.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 020.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile 2x per sash

617 120.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 120.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „rounded cover profile“ 1x complementary accessory kit A

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling Without

1x rounded cover profile

cut to size in mm

1x accessory kit I „rounded cover profile“

617 220.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 220.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 220.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 16); „rounded cover profile for rear side“ (see p. 16).

Track fixed to ceiling 1 sash

Accessories Figure

Product description Rounded cover profile for rear side

16 Profile length

1996 mm

Execution

Unit

617 500.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 500.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 500.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

track fixed to ceiling

Are you using the „rounded cover profile“ on the front side of your system and do you want to produce the curved look on the rear side as well?

Product number

cut to size in mm

List price

Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). End plates for rear cover profile are not included in the accessory kits (see p. 16).

Are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates? Do you want to add a hair-bristle lining to your system?

End plate for „rounded cover profile & rounded cover profile for rear side“

617 250.0000.020

stainless steel

1 unit

track fixed to ceiling left or right hand use Hair-bristle lining

Note: end plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.

617 253.0000.315

for cover profiles and track profiles packing unit = 20 m

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: track fixed to ceiling, systems with 2 sashes

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Clear width (building) = LW =

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass width

Calculation of glass height H1 = R - 43 =

Calculation of sash weight (kg)

A = LW/2 + 33 =

Calculation of profile length (track & cover profile) C=Ax4+4=

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 = Number of possible cushioning systems as set out table

Length of track & cover profile for your Portavant system

Maximum number of cushioning systems for your Portavant system Track fixed to ceiling 2 sashes

Track fixed to ceiling 2 sashes

Complete sets: track fixed to ceiling, 2 sashes, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x per sash

1x track profile for track fixed to ceiling

cut to size in mm

1x straight cover profile 2x accessory kit II „straight cover profile“

18 Product number

Execution

Unit

617 022.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 022.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 022.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

5996 mm

Complete set, 2 sashes 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 2x per sash

1x track profile for track fixed to ceiling

EV 1

1 unit

.120

C 31

1 unit

617 122.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x straight cover profile 2x accessory kit II „straight cover profile“ 2x complementary accessory kit A

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to ceiling Without

617 122.5996.110

1x straight cover profile

cut to size in mm

2x accessory kit I „straight cover profile“

617 222.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 222.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 222.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 20).

Portavant

Glass fittings with logic

Complete sets: track fixed to ceiling, 2 sashes, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x track profile for track fixed to ceiling 1x per sash

cut to size in mm

1x rounded cover profile 2x accessory kit II „rounded cover profile“

Product number

Execution

Unit

617 020.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 020.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 020.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

5996 mm

Complete set, 2 sashes 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 1x track profile for track fixed to ceiling 2x per sash

EV 1

1 unit

.120

C 31

1 unit

617 120.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x rounded cover profile 2x accessory kit II „rounded cover profile“ 2x complementary accessory kit A

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile Without

617 120.5996.110

cut to size in mm

2x accessory kit I „rounded cover profile“

617 220.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 220.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 220.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Recommendation: hair-bristle lining (see p. 20); „rounded cover profile for rear side“ (see p. 20).

Track fixed to ceiling 2 sashes

Accessories Figure

Product description Rounded cover profile for rear side

20 Profile length

1996 mm

Execution

Unit

617 500.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 500.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 500.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

track fixed to ceiling

Are you using the „rounded cover profile“ on the front side of your system and do you want to produce the curved look on the rear side as well?

Product number

cut to size in mm

List price

Are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates? Do you want to add a hair-bristle lining to your system?

End plate for „rounded cover profile & rounded cover profile for rear side“

617 250.0000.020

stainless steel

1 unit

track fixed to ceiling left or right hand use Hair-bristle lining

617 253.0000.315

for cover profiles and track profiles packing unit = 20 m

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the “handles” tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: track fixed to ceiling with side-light, 1 sash

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

Your project measurements (mm) Clear width (building) = LW = Calculation of glass width Sliding sash (mm) A = LW + 35 = Calculation of glass width Side-light (mm) B = A + 35 = Calculation of profile length (track & cover profile) C=Ax2=

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass height Sliding sash (mm) H1 = R - 43 =

Calculation of sash weight (kg)

Calculation of glass height Side-light (mm) H2 = R - 63 =

Length of track & cover profile for your Portavant system

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 = Number of possible cushioning systems as set out table

Maximum number of cushioning systems for your Portavant system Track fixed to ceiling/Side-light 1 sash

Track fixed to ceiling/Side-light 1 sash

Complete sets: track fixed to ceiling with side-light, 1 sash, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x straight cover profile for side-light 1x per sash

cut to size in mm

1x accessory kit II „straight cover profile“

Product number

Execution

Unit

617 026.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 026.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 026.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. Other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). Recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to ceiling 1x straight cover profile for side-light 2x per sash

617 126.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 126.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „straight cover profile“ 1x complementary accessory kit A

Price plus 1x EUR 352,95. Formula: profile length (m) x price + EUR 352,95 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. Other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). Recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x straight cover profile for side-light Without

cut to size in mm

1x accessory kit I „straight cover profile“

617 226.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 226.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 226.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25), Recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26).

Portavant

Glass fittings with logic

Complete sets: track fixed to ceiling with side-light, 1 sash, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

1996 mm

Complete set, 1 sash 1x COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile for side-light 1x per sash

cut to size in mm

1x accessory kit II „rounded cover profile“

Product number

Execution

Unit

617 024.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 024.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 024.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

Price plus 1x EUR 254,35. Formula: profile length (m) x price + EUR 254,35 for accessory kit. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. Other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). Recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).

2996 mm

Complete set, 1 sash 2x COMFORT STOP + AUTO CLOSE

cut to size in mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile for side-light 2x per sash

617 124.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 124.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x accessory kit II „rounded cover profile“ 1x complementary accessory kit A

1996 mm

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2996 mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile for side-light Without

cut to size in mm

1x accessory kit I „rounded cover profile“

617 224.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 224.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 224.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 157,17. Formula: profile length (m) x price + EUR 157,17 for accessory kit. Note: suitable for sash weight up to 120 kg. Other profiles: floor-wall-, ceiling-, cover profile (see p. 24/25). Recommendation: hair-bristle lining (see p. 26); silicone gasket (see p. 26); end plates for floor-wall-, ceiling profile (see p. 26); „rounded cover profile for rear side“ (see p. 25).

Track fixed to ceiling/Side-light 1 sash

Accessories Figure

Product description Floor-wall-profile (U-profile)

24 Profile length

1996 mm

Execution

Unit

617 520.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 520.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 520.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

617 530.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

fixed side-light, profile height 16 mm

Do you wish to frame the fixed sidelights of your system with a floorwall profile?

Product number

5996 mm cut to size in mm

Recommendation: silicone gasket (see p. 26); end plate (see p. 26).

Ceiling profile (U-profile)

1996 mm

fixed side-light, profile height 35 mm Calculation of glass height at ceiling

2996 mm

profile (H3)

Do you wish to extend the fixed sidelights of your system further than the track?

Your project measurements (mm) Room height (upper edge of profile) = R = ________

3996 mm 5996 mm

Calculation of fixed sash glass height at the ceiling profile (mm) = H3 = R - 27 mm = ________

cut to size in mm

Recommendation: silicone gasket (see p. 26); end plate (see p. 26).

List price

Portavant

Glass fittings with logic

Accessories Figure

Product description

Profile length

1996 mm

Cover profile

Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?

Product number

cut to size in mm

Unit

617 540.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 540.2996.110

EV 1

1 unit

fixed side-light

2996 mm

Execution

.120

C 31

1 unit

617 540.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

617 500.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.3996.110

EV 1

1 unit

List price

Note: for clip-on on cover profiles for fixed side-light.

Rounded cover profile for rear side

1996 mm

track fixed to ceiling

2996 mm

Are you using the „rounded cover profile“ on the front side of your system and do you want to produce the curved look on the rear side as well?

3996 mm cut to size in mm

.120

C 31

1 unit

617 500.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

Are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates?

End plate for „rounded cover profile with fixed side-light & rounded cover

617 251.0000.020

stainless steel

1 unit

profile for rear side“ track fixed to ceiling left or right hand use

Track fixed to ceiling/Side-light 1 sash

Note: End plates for straight covers or rounded covers with straight look on the rear side are included in the accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.

Track fixed to ceiling/Side-light 1 sash

Accessories Figure

Are you using the floor-wall-profile and do you want to add end plates to the floor-wall-profile? Are you using the ceiling profile and do you want to add end plates to the ceiling profile? Do you want to add a hair-bristle lining to your system?

Product description

Profile length

Product number

Execution

Unit

End plate for floor-wall-profile left or right hand use

617 257.0000.020

stainless steel

1 unit

End plate for ceiling profile left or right hand use

617 263.0000.020

stainless steel

1 unit

Hair-bristle lining

617 253.0000.315

List price

for cover profiles and track profiles packing unit = 20 m Silicone gasket for side-light packing unit = 50 m

Do you wish to attach the fixed sidelights or other fixed glass sashes in the cover profile, the floor-wallprofile or the ceiling profile with a silicone gasket?

glass thickness 8 mm glass thickness 10 mm glass thickness 12 mm

617 254.0000.000

transp.

617 254.0000.090

black

617 255.0000.000

transp.

617 255.0000.090

black

617 256.0000.000

transp.

617 256.0000.090

black

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the â&#x20AC;&#x153;handlesâ&#x20AC;? tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: track fixed to ceiling with side-light, 2 sashes

Calculation of glass width and profile length

Examination of possible cushioning options Sash weight (kg)

81–120

< 720

≤ 80

Your project measurements (mm) Clear width (building) = LW = Calculation of glass width Sliding sash (mm) A = LW/2 + 33 = Calculation of glass width Side-light (mm) B = A + 35 = Calculation of profile length (track & cover profile) C=Ax4+4=

720 – 1049

1x per sash

Without

≥ 1050

Glass width (mm)

Without

2x per sash

Your project measurements (mm) Room height (upper edge of profile) = R =

Your project measurements (mm)

Calculation of glass height Sliding sash (mm) H1 = R - 43 =

Calculation of sash weight (kg)

Glass thickness =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 =

Calculation of glass height Side-light (mm) H2 = R - 63 =

Number of possible cushioning systems as set out table

Length of track & cover profile for your Portavant system

Maximum number of cushioning systems for your Portavant system Track fixed to ceiling/Side-light 2 sashes

Track fixed to ceiling/Side-light 2 sashes

Complete sets: track fixed to ceiling with side-light, 2 sashes, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x track profile for track fixed to ceiling 1x per sash

cut to size in mm

1x straight cover profile for fixed sidelight 2x accessory kit II „straight cover profile“

Execution

Unit

617 026.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 026.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 026.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

Price plus 1x EUR 508,70. Formula: profile length (m) x price + EUR 508,70 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 720 mm. Other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). Recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32).

5996 mm

2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 1x track profile for track fixed to ceiling

617 126.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 126.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x straight cover profile for fixed sidelight 2x accessory kit II „straight cover profile“ 2x complementary accessory kit A

Price plus 1x EUR 705,90. Formula: profile length (m) x price + EUR 705,90 for accessory kits. Note: only suitable for sash weight up to 80 kg, minimum sash width 1050 mm. Other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). Recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32).

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to ceiling 1x straight cover profile for fixed sideWithout

Product number

Complete set, 2 sashes

2x per sash

cut to size in mm

light 2x accessory kit I „straight cover profile“

617 226.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 226.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 226.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). Recommendation: hair-bristle lining (see p. 32), silicone gasket (see p. 32), end plates for floor-wall-, ceiling profile (see p. 32).

Portavant

Glass fittings with logic

Complete sets: track fixed to ceiling with side-light, 2 sashes, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description

Profile length

3996 mm

Complete set, 2 sashes 1x COMFORT STOP + AUTO CLOSE

5996 mm

per sash includes: 1x track profile for track fixed to ceiling 1x per sash

cut to size in mm

1x rounded cover profile for fixed sidelight 2x accessory kit II „rounded cover profile“

Execution

Unit

617 024.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 024.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 024.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

List price

5996 mm

2x COMFORT STOP + AUTO CLOSE

cut to size in mm

per sash includes: 1x track profile for track fixed to ceiling

617 124.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 124.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

1x rounded cover profile for fixed sidelight 2x accessory kit II „rounded cover profile“ 2x complementary accessory kit A

3996 mm

Complete set, 2 sashes without COMFORT STOP + AUTO CLOSE

5996 mm

includes: 1x track profile for track fixed to ceiling 1x rounded cover profile for fixed sideWithout

Product number

Complete set, 2 sashes

2x per sash

cut to size in mm

light 2x accessory kit I „rounded cover profile“

617 224.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 224.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 224.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

Price plus 1x EUR 314,34. Formula: profile length (m) x price + EUR 314,34 for accessory kits. Note: suitable for sash weight up to 120 kg. Other profiles: floor-wall-, ceiling-, cover profile (see p. 30/31). Recommendation: hair-bristle lining (see p. 32); silicone gasket (see p. 32); end plates for floor-wall-, ceiling profile (see p. 32); „rounded cover profile for rear side“ (see p. 31).

Track fixed to ceiling/Side-light 2 sashes

Accessories Figure

Product description Floor-wall-profile (U-profile)

30 Profile length

1996 mm

Execution

Unit

617 520.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 520.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 520.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

617 530.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

fixed side-light, profile height 16 mm

Do you wish to frame the fixed sidelights of your system with a floorwall profile?

Product number

5996 mm cut to size in mm

Recommendation: silicone gasket (see p. 32); end plate (see p. 32).

Ceiling profile (U-profile)

1996 mm

fixed side-light, profile height 35 mm Calculation of glass height at ceiling

2996 mm

profile (H3)

Do you wish to extend the fixed sidelights of your system further than the track?

Your project measurements (mm) Room height (upper edge of profile) = R = ________

3996 mm 5996 mm

Calculation of fixed sash glass height at the ceiling profile (mm) = H3 = R - 27 mm = ________

cut to size in mm

Recommendation: silicone gasket (see p. 32); end plate (see p. 32).

List price

Portavant

Glass fittings with logic

Accessories Figure

Product description Cover profile

Do you wish to close the open slot for receiving the fixed side-light in the cover profile at the door opening with a special cover profile?

Profile length

1996 mm

Product number

cut to size in mm

Unit

617 540.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 540.2996.110

EV 1

1 unit

fixed side-light

2996 mm

Execution

.120

C 31

1 unit

617 540.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

617 500.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.3996.110

EV 1

1 unit

List price

Note: for clip-on on cover profiles for fixed side-light.

Rounded cover profile for rear side

1996 mm

track fixed to ceiling

2996 mm

Are you using the „rounded cover profile“ on the front side of your system and do you want to produce the curved look on the rear side as well?

3996 mm cut to size in mm

.120

C 31

1 unit

617 500.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

Are you installing the rear curved cover profile in your system and do you want to equip it with end plates?

617 251.0000.020

End plate for „rounded cover profile with fixed side-light & rounded cover

stainless steel

1 unit

profile for rear side“ track fixed to ceiling left or right hand use

Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory sets. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.

Track fixed to ceiling/Side-light 2 sashes

Accessories Figure

Product description

Profile length

Product number

Execution

Unit

End plate for floor-wall-profile left or right hand use

617 257.0000.020

stainless steel

1 unit

End plate for ceiling profile left or right hand use

617 263.0000.020

stainless steel

1 unit

Hair-bristle lining

617 253.0000.315

List price

for cover profiles and track profiles packing unit = 20 m Silicone gasket for side-light packing unit = 50 m

Do you wish to attach the fixed sidelights or other fixed glass sashes in the cover profile, the floor-wallprofile or the ceiling profile with a silicone gasket?

glass thickness 8 mm glass thickness 10 mm glass thickness 12 mm

617 254.0000.000

transp.

617 254.0000.090

black

617 255.0000.000

transp.

617 255.0000.090

black

617 256.0000.000

transp.

617 256.0000.090

black

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the â&#x20AC;&#x153;handlesâ&#x20AC;? tab. (s. S. 62-63).

Portavant

Glass fittings with logic

Determination of measurements: installation in glass facade, 1 sash, clear width 1000

Calculation of glass width and profile length

Examination of possible cushioning options â&#x20AC;˘ With a sash weight of up to 80 kg, there is a choice of cushioning on one end, cushioning on both ends and no cushioning. â&#x20AC;˘ Cushioning is not possible with a sash weight of 81-120 kg

Your project measurements (mm) Glass thickness = Calculation of sash weight (kg) Complete sets are also available for clear width = 1200 (see p. 36). Please allow us to advise you for different installation situations with installation in glass facade.

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 =

Your project measurements (mm) Height of door aperture = LH = Calculation of glass height (mm) H1 = LH + 28 =

Number of possible cushioning systems as set out table LW = Clear width LH = Clear height

Maximum number of cushioning systems for your Portavant system

LWt = Clear width when door open A

= Glass width of sash

BO = Transom light width

Installation in glass facade 1 sash

Complete sets: installation in glass facade, 1 sash, clear width 1000, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description Complete set, 1 sash

Profile length

2074 mm

1x COMFORT STOP + AUTO CLOSE

Product number

34 Execution

Unit

617 019.2074.110

EV 1

1 unit

.120

C 31

1 unit

List price

clear width 1000 mm includes: 1x track profile installation in glass 1x per sash

facade 1x straight cover profile 1x profile for glass facade

Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. Other profiles: floor-wall-profile, ceiling profile (see p. 39). Recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

1x accessory kit II „glass facade“ Complete set, 1 sash

2074 mm

2x COMFORT STOP + AUTO CLOSE

617 119.2074.110

EV 1

1 unit

.120

C 31

1 unit

clear width 1000 mm includes: 1x track profile installation in glass 2x per sash

facade 1x straight cover profile 1x profile for glass facade

Note: only suitable for sash weight up to 80 kg, sash width 1070 mm. Other profiles: floor-wall-profile, ceiling profile (see p. 39): Recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

1x accessory kit II „glass facade“ 1x complementary accessory kit A Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

2074 mm

617 219.2074.110

EV 1

1 unit

.120

C 31

1 unit

clear width 1000 mm includes: 1x track profile installation in glass Without

facade 1x straight cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1070 mm. Other profiles: floor-wall-profile, ceiling profile (see p. 39). Recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

Portavant

Glass fittings with logic

Complete sets: installation in glass facade, 1 sash, clear width 1000, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description Complete set, 1 sash

Profile length

2074 mm

Product number

1x per sash

Complete set, 1 sash

2x per sash

Complete set, 1 sash

EV 1

1 unit

C 31

1 unit

Without

List price

2074 mm

617 117.2074.110

EV 1

1 unit

.120

C 31

1 unit

2074 mm

617 217.2074.110

EV 1

1 unit

.120

C 31

1 unit

without COMFORT STOP + AUTO CLOSE clear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Unit

.120

2x COMFORT STOP + AUTO CLOSE clear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A

Execution

617 017.2074.110

1x COMFORT STOP + AUTO CLOSE clear width 1000 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“

Installation in glass facade 1 sash

Determination of measurements: installation in glass facade, 1 sash, clear width 1200 Calculation of glass width and profile length

Calculation of glass width and profile length

Your project measurements (mm) Glass thickness = Calculation of sash weight (kg) Complete sets are also available for clear width = 1000 (see p. 33). Please allow us to advise you for different installation situations with installation in glass facade.

Your project measurements (mm) Height of door aperture = LH =

Sash weight = A/1000 x H1/1000 x Glass thickness (without film) x 2,5 =

Calculaion of glass height (mm) H1 = LH + 28 = Number of possible cushioning systems as set out table

LW = Clear width LH = Clear height LWt = Clear width when door open A

= Glass width of sash

BO = Transom light width

Maximum number of cushioning systems for your Portavant system

Portavant

Glass fittings with logic

Complete sets: installation in glass facade, 1 sash, clear width 1200, “straight cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description Complete set, 1 sash

Profile length

2474 mm

Product number

1x per sash

Complete set, 1 sash

2x per sash

Complete set, 1 sash

1 unit

.120

C 31

1 unit

Without

List price

Note: only suitable for sash weight up to 80 kg, sash width 1270 mm. Other profiles: floor-wall-profile, ceiling profile (see p. 39). Recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40).

2474 mm

617 119.2474.110

EV 1

1 unit

.120

C 31

1 unit

2474 mm

617 219.2474.110

EV 1

1 unit

.120

C 31

1 unit

without COMFORT STOP + AUTO CLOSE clear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Unit

EV 1

2x COMFORT STOP + AUTO CLOSE clear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A

Execution

617 019.2474.110

1x COMFORT STOP + AUTO CLOSE clear width 1200 mm includes: 1x track profile installation in glass facade 1x straight cover profile 1x profile for glass facade 1x accessory kit II „glass facade“

Note: suitable for sash weight up to 120 kg, sash width 1270 mm. Other profiles: floor-wall-profile, ceiling profile (see p. 39). Recommendation: hair-bristle lining (see p. 40); silicone gasket (see p. 41); end plates for floor-wall-profile, ceiling profile (see p. 40)

Installation in glass facade 1 sash

Installation in glass facade, 1 sash, clear width 1200, “rounded cover profile” Cover design

Number of sashes

Number of cushioning systems

Product description Complete set, 1 sash

Profile length

2474 mm

1x COMFORT STOP + AUTO CLOSE

1x per sash

clear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ Complete set, 1 sash

2x per sash

Complete set, 1 sash without COMFORT STOP + AUTO CLOSE

Without

clear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit I „glass facade“

Product number

Execution

Unit

617 017.2474.110

EV 1

1 unit

.120

C 31

1 unit

List price

2474 mm

2x COMFORT STOP + AUTO CLOSE clear width 1200 mm includes: 1x track profile installation in glass facade 1x rounded cover profile 1x profile for glass facade 1x accessory kit II „glass facade“ 1x complementary accessory kit A

617 117.2474.110

EV 1

1 unit

.120

C 31

1 unit

2474 mm

617 217.2474.110

EV 1

1 unit

.120

C 31

1 unit

Portavant

Glass fittings with logic

Accessories Figure

Product description Floor-wall-profile (U-profile)

Profile length

1996 mm

Product number

Unit

617 520.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 520.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 520.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.length.110

EV 1

per m cut to size1)

.120

C 31

per m cut to size1)

617 530.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

fixed side-light, profile height 16 mm

Do you wish to frame the glass facade of your system with a floor-wallprofile?

Execution

5996 mm cut to size in mm

Recommendation: silicone gasket (see p. 41); end plate (see p. 40).

Ceiling profile (U-profile)

1996 mm

fixed side-light, profile height 35 mm

2996 mm

Do you wish to attach the fixed glass sashes of your system with a ceiling profile?

3996 mm 5996 mm cut to size in mm

Recommendation: silicone gasket (see p. 41); end plate (see p. 40).

Installation in glass facade 1 sash

List price

Installation in glass facade 1 sash

Accessories Figure

Product description Rounded cover profile for rear side

40 Profile length

2074 mm

track fixed to wall

Are you using the â&#x20AC;&#x17E;rounded cover profileâ&#x20AC;&#x153; on the front side of your system and do you want to produce the curved look on the rear side as well?

2474 mm

Product number

Execution

Unit

617 500.2074.110

EV 1

1 unit

.120

C 31

1 unit

617 500.2474.110

EV 1

1 unit

.120

C 31

1 unit

List price

Note: for optional clip-on on the rear side of the track profile in the event of track fixed to ceiling (to get symmetrical profile). end plates for rear cover profile are not included in the accessory kits (see p. 40).

Are you using the profile for glass facade and do you want to add end plates?

Are you using the floor-wall-profile and do you want to add end plates?

Are you using the ceiling profile and do you want to add end plates?

Do you want to add a hair-bristle lining to your system?

End plate for profile for glass facade with rounded cover profile for rear side

617 265.0000.020

stainless steel

1 unit

Note: end plates for straight cover profiles or rounded cover profiles for fixed side-light with straight look on the rear side are included in the accessory kits.

End plate for floor-wall-profile left or right hand use

617 257.0000.020

stainless steel

1 unit

End plate for ceiling profile left or right hand use

617 263.0000.020

stainless steel

1 unit

Hair-bristle lining

617 253.0000.315

for cover profiles and track profiles packing unit = 20 m

Portavant

Glass fittings with logic

Accessories Figure

Product description Silicone gasket for fixed side-light packing unit = 50 m

Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall-profile or the ceiling profile with a silicone gasket?

Profile length

glass thickness 8 mm glass thickness 10 mm glass thickness 12 mm

Product number

Execution

Unit

617 254.0000.000

transp.

617 254.0000.090

black

617 255.0000.000

transp.

617 255.0000.090

black

617 256.0000.000

transp.

617 256.0000.090

black

List price

You can find a comprehensive selection of innovative sliding door finger pull handles and pull handles, coordinated in design, in the â&#x20AC;&#x153;handlesâ&#x20AC;? tab. (s. S. 62-63).

Installation in glass facade 1 sash

Portavant

Glass fittings with logic

Choose the single components from our range.

Single components Profiles

Single components: profiles Figure

Product description Track profile

Profile length

1996 mm

44 Product number

Execution

Unit

617 015.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 015.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 015.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 015.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 015.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

track fixed to wall

5996 mm cut to size in mm

Recommendation: hair-bristle lining (see p. 58).

Track profile

1996 mm

617 025.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 025.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 025.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 025.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 025.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

track fixed to ceiling

2996 mm 3996 mm 5996 mm cut to size in mm

Recommendation: hair-bristle lining (see p. 58).

List price

Portavant

Glass fittings with logic

Single components: profiles Figure

Product description Straight cover profile

Profile length

1996 mm

Product number

Execution

Unit

617 055.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 055.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 055.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 055.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 055.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

617 035.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 035.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 035.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 035.5996.110

EV 1

1 unit

track fixed to ceiling or track fixed to wall

5996 mm cut to size in mm

Recommendation: hair-bristle lining (see p. 58).

Rounded cover profile

1996 mm

track fixed to ceiling or track fixed to wall

2996 mm 3996 mm 5996 mm cut to size in mm

.120

C 31

1 unit

617 055.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

Recommendation: hair-bristle lining (see p. 58); â&#x20AC;&#x17E;rounded cover profile for rear sideâ&#x20AC;&#x153; (see p. 49).

Single components Profiles

List price

Single components Profiles

Single components: profiles Figure

Product description Straight cover profile for fixed side-light

Profile length

1996 mm

46 Product number

Execution

Unit

617 065.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 065.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 065.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 065.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 065.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

track fixed to ceiling or track fixed to wall

5996 mm cut to size in mm

Recommendation: hair-bristle lining (see p. 58).

Rounded cover profile for fixed side-light

1996 mm

track fixed to ceiling or track fixed to wall

2996 mm 3996 mm 5996 mm cut to size in mm

617 045.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 045.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 045.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 045.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 045.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

Recommendation: hair-bristle lining (see p. 58); â&#x20AC;&#x17E;rounded cover profile for rear sideâ&#x20AC;&#x153; (see p. 49).

List price

Portavant

Glass fittings with logic

Single components: profiles Figure

Product description Rear profile for glass facade

Profile length

4960 mm

for attaching the track to a glass facade

cut to size in mm

Product number

Execution

Unit

617 005.4960.110

EV 1

1 unit

.120

C 31

1 unit

617 005.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

List price

Other required system components: track profile for wall mounting (see p. 44); „straight cover profile“ respectively „rounded cover profile“ (see p. 45); accessory kit I „glass facade“ without COMFORT STOP + AUTO CLOSE respectively accessory kit II „glass facade“ with COMFORT STOP + AUTO CLOSE (see p. 55/56); if applicable complementary accessory kit „glass facade“ (see p. 57); if applicable floor-wall-profile, ceiling profile (see p. 47/48). Recommendation: „rounded cover profile for rear side“ (see p. 49); end plates for profile for glass facade with „rounded cover profile“ on rear (see p. 58). Note: end plates for the installation in glass facade with straight design on the rear side are included in the accessory kits.

Floor-wall-profile (U-profile)

1996 mm

fixed side-light, profile height 16 mm for attaching your fixed sash to the floor

2996 mm

and the wall

3996 mm 5996 mm cut to size in mm

617 520.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 520.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

Recommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).

Single components Profiles

Single components: profiles Figure

Product description Ceiling profile (U-profile)

Profile length

1996 mm

48 Product number

Unit

617 530.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 530.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 530.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.5996.110

EV 1

1 unit

.120

C 31

1 unit

617 530.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

fixed side-light, profile height 35 mm for attaching your fixed sash to the

Execution

ceiling

5996 mm cut to size in mm

Recommendation: silicone gasket (see p. 59), end plate for floor-wall-profile (see p. 58).

Cover profile

1996 mm

617 540.1996.110

EV 1

1 unit

.120

C 31

1 unit

617 540.2996.110

EV 1

1 unit

.120

C 31

1 unit

617 540.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

fixed side-light for covering the open slot in the cover for

2996 mm

fixed side-lights in the door opening

cut to size in mm

Note: for clip-on on cover profiles for fixed side-light.

List price

Portavant

Glass fittings with logic

Single components: profiles Figure

Product description Rounded cover profile for rear side

Profile length

1996 mm

Product number

Execution

Unit

617 500.1996.110

EV 1

1 unit

.120

C 31

1 unit

2996 mm

617 500.2996.110

EV 1

1 unit

.120

C 31

1 unit

3996 mm

617 500.3996.110

EV 1

1 unit

.120

C 31

1 unit

617 500.length.110

EV 1

per m cut to size

.120

C 31

per m cut to size

track fixed to ceiling for producing a curved look also on the

rear side of your system

cut to size in mm

Single components Profiles

List price

Single components Profiles

Portavant

Glass fittings with logic

Single components: accessories Figure

Product description Accessory kit I „straight cover profile“

Profile length

Product number

Execution

617 205.0000.000

Unit

1 unit

2x end stop mechanism for holding in end position for sash weight up to 120 kg includes:

Are you installing the „straight cover profile“ and do you require an accessory kit for doors up to 120 kg sash weight without COMFORT STOP and AUTO CLOSE? This accessory kit is suitable for all Portavant installations except glass facades. The corresponding accessory kit for glass facades can be found on p. 55.

2x clamp-carriers with height adjustment, safety catch and anti-tiltprotection

Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).

4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 2x return stops for holding the door in the final position 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „straight cover profile of side-light + track profile“

Single components Accessories

List price

Single components Zubehör Accessories

Single components: accessories Figure

Product description Accessory kit I „rounded cover profile“

Profile length

52 Product number

Execution

617 200.0000.000

2x end stop mechanism for holding in end position for sash weight up to 120 kg includes:

Are you installing the „rounded cover profile“ and do you require an accessory kit for doors up to 120 kg sash weight without COMFORT STOP and AUTO CLOSE? This accessory kit is suitable for all Portavant installations except glass facades. The corresponding accessory kit for glass facades can be found on p. 55.

2x clamp-carriers with height adjustment, safety catch and anti-tiltprotection 4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 2x return stops for holding the door in the final position 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile of side-light + track profile“

Note: 1x per door sash required. Suitable for sash weight up to 120 kg. Note: glass facade installation requires accessory kit I „glass facade“ (see p. 55).

Unit

1 unit

List price

Portavant

Glass fittings with logic

Single components: accessories Figure

Product description Accessory kit II „straight cover profile“

Profile length

Product number

617 225.0000.000

Execution

Unit

1 unit

1x COMFORT STOP + AUTO CLOSE 1x end stop mechanism for holding in end position for sash weight up to 80 kg includes: 2x clamp-carriers with height adjustment, safety catch and anti-tilt-

Are you installing the „straight cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with COMFORT STOP and AUTO CLOSE?

protection

This accessory kit is suitable for all Portavant installations except glass facades. The corresponding accessory kit for glass facades can be found on p. 56.

glass thickness

4x safety studs for special applications

Note: 1x per door sash required. Only suitable for sash weight up to 80 kg. COMFORT STOP + AUTO CLOSE can be used on one side from 720 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be used on both sides from 1050 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be retrofitted. Note: glass facade installation requires accessory kit II „glass facade“ (see p. 56).

1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm 2x end stops with 2 rubber cushions each 1x return stop for holding the door in the final position 1x cushioning and self-closing system COMFORT STOP + AUTO CLOSE with patented working mechanism and fixing adapter 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „straight cover profile profile of sidelight + track profile“

Single components Accessories

List price

Single components Accessories

Single components: accessories Figure

Product description Accessory kit II „rounded cover profile“

Profile length

54 Product number

617 220.0000.000

Execution

Unit

1 unit

1x COMFORT STOP + AUTO CLOSE 1x end stop mechanism for holding in end position for sash weight up to 80 kg includes: 2x clamp-carriers with height adjustment, safety catch and anti-tilt-

Are you installing the „rounded cover profile“ and do you require an accessory set for doors up to 80 kg sash weight with COMFORT STOP and AUTO CLOSE?

protection

This accessory kit is suitable for all Portavant installations except glass facades. The corresponding accessory kit for glass facades can be found on p. 56.

glass thickness

4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm 2x end stops with 2 rubber cushions each 1x return stop for holding the door in the final position 1x cushioning and self-closing system COMFORT STOP + AUTO CLOSE with patented working mechanism and fixing adapter 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile of side-light + track profile“

List price

Portavant

Glass fittings with logic

Single components: accessories Figure

Product description Accessory kit I „glass facade“

Profile length

Product number

Execution

617 207.0000.000

Unit

1 unit

for „straight & rounded cover profile“ 2x end stop mechanism for holding in end position includes: 2x clamp-carriers with height adjustment, safety catch and anti-tiltprotection

Note: 1x per door sash required. Suitable for sash weight up to 120 kg.

4x safety studs for special applications 1x set elastomeric clamping inserts

Do you use Portavant for the installation in glass facade and do you require an accessory kit for doors up to 120 kg sash weight without COMFORT STOP und AUTO CLOSE?

from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 2x return stop for holding the door in the final position 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for profile for glass facade 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)

Single components Accessories

List price

Single components Accessories

Single components: accessories Figure

Product description Accessory kit II „glass facade“

Profile length

56 Product number

617 227.0000.000

Execution

Unit

1 unit

for „straight & rounded cover profile“

Do you use Portavant for the installation in glass facade and do you require an accessory kit for doors up to 80 kg sash weight with COMFORT STOP und AUTO CLOSE?

1x COMFORT STOP + AUTO CLOSE 1x end stop mechanism for holding in end position includes: 2x clamp-carriers with height adjustment, safety catch and anti-tiltprotection 4x safety studs for special applications 1x set elastomeric clamping inserts from 8 mm tempered glass till 12,76 mm laminated glass 1x floor guide from 8 mm till 12,76 mm glass thickness 2x end stops with 2 rubber cushions each 1x return stop for holding the door in the final position 1x cushioning and self-closing system COMFORT STOP + AUTO CLOSE with patented working mechanism and fixing adapter 2x end plates (stainless steel) for „straight cover profile + track profile“ 2x end plates (stainless steel) for „rounded cover profile + track profile“ 2x end plates (stainless steel) for profile for glass facade 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound)

List price

Portavant

Glass fittings with logic

Single components: accessories Figure

Product description Complementary accessory kit A

Do you wish to equip your system with additional cushioning systems for up to 80 kg sash weight?

1x retrofit COMFORT STOP + AUTO CLOSE for sash weight up to 80 kg

Complementary accessory kit B

Do you with to equip your system with cushioning systems for up to

1x retrofit COMFORT STOP+ AUTO CLOSE for sash weight up to 40 kg

40 kg sash weight? Are you looking for a Portavant with synchronously opening system in which both sashes can be opened simultanously by hand?

Complementary accessory kit C for 2-sash synchronously opening system, in connection with 2x accessory kit I, for sash weight up to 80 kg Complementary accessory kit „glass

Do you require additional accessories to the components included in the accessory kits I and II „glass facade“ for glass facade installation?

Profile length

57 Product number

617 230.0000.000

Execution

Unit

1 unit

Note: only suitable for sash weight up to 80 kg. Also required for cushioning on both sides. The complementory accessory kit A can be combined with accessory kit I and accessory kit II. COMFORT STOP + AUTO CLOSE can be used on one side from 720 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be used on both sides from 1050 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be retrofitted.

617 233.0000.000

1 unit

Note: only suitable for sash weight up to 40 kg. The complementory accessory kit B can be combined with accessory kit I. COMFORT STOP + AUTO CLOSE can be used on one side from 720 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be used on both sides from 1050 mm sash width onwards. COMFORT STOP + AUTO CLOSE can be retrofitted.

617 210.0000.000

1 unit

Note: the synchronised fitting is only suitable for a door sash weight of up to 80 kg each. The synchronised fitting is only suitable for wall and ceiling mounting without side-lights. The kit for synchronously opening doors cannot be combined with COMFORT STOP + AUTO CLOSE.

617 237.0000.000

1 unit

617 235.0000.000

1 unit

facade“ contains: 1x set of fixing materials for glass facade with 14 drill holes (incl. shims, screws and sealing compound) Complementary accessories kit „timber sliding door“

Do you wish to install a timber sliding door instead of a glass sliding door and do you require an adapter for applying Portavant?

contains: 1x set of fixing materials for timber sliding door (incl. screws) 2x roller assembly adapter sheet for timber sliding door 2x safety catch for timber sliding door 1x floor guide for timber sliding door

List price

Note: Please allow us to advise you with regard to size and application. Note: The complementary accessory kit „timber sliding door“ can be combined with accessory kits I and II. COMFORT STOP + AUTO CLOSE can be used on a single side from sash width 720 mm. COMFORT STOP + AUTO CLOSE can be used on both sides from sash width 1050 mm. COMFORT STOP + AUTO CLOSE can also be retrofitted.

Single components Accessories

Single components: accessories Figure

Are you installing the rear „rounded cover profile“ in your system and do you want to equip it with end plates? Are you installing the rear „rounded cover profile“ in your system with side-light and do you want to equip it with end plates? Are you using the floor-wall-profile and do you want to add end plates?

Are you using the ceiling profile and do you want to add end plates? Are you installing the „rounded cover profile“ on the front and rear side of your glass facade installation system and do you want to use end plates? Do you want to add a hair-bristle lining to your system?

Product description End plate for „rounded cover profile & rounded cover profile for rear side“ track fixed to ceiling left or right hand use End plate for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ track fixed to ceiling left or right hand use

Profile length

58 Product number

617 250.0000.020

Execution

stainless steel

Unit

List price

1 unit

Note: end plates for „straight cover profile“ and „rounded cover profile“ with straight design on the rear side are included in the complementory accessory kits. End plates for „rounded cover profile & rounded cover profile for rear side“ are not included in the accessory kits.

617 251.0000.020

stainless steel

1 unit

Note: end plates for „straight cover profile“ and „rounded cover profile“ for fixed side-light with straight design on the rear side are included in the complementory accessory kits. End plates for „rounded cover profile with fixed side-light & rounded cover profile for rear side“ are not included in the accessory kits.

End plate for floor-wall-profile left or right hand use

617 257.0000.020

stainless steel

1 unit

End plate for ceiling profile left or right hand use

617 263.0000.020

stainless steel

1 unit

End plate for profile for glass facade with „rounded cover profile“ on rear

617 265.0000.020

stainless steel

1 unit

Note: end plates for „straight cover profile“ and „rounded cover profile“ for the installation in glass facade with straight design on the rear side are included in the complementory accessory kits.

Hair-bristle lining for cover profiles and track profiles packing unit = 20 m

617 253.0000.315

Portavant

Glass fittings with logic

Single components: accessories Figure

Product description Silicone gasket for side-light packing unit = 50 m

Do you wish to attach the side-lights or other fixed glass sashes in the cover profile, the floor-wall profile or the ceiling profile with a silicone gasket?

Do you require additional floor guides to the one included in the accessory kit?

Profile length

glass thickness 8 mm glass thickness 10 mm glass thickness 12 mm

Replacement floor guide

Product number

Execution

Unit

617 254.0000.000

transp.

617 254.0000.090

black

617 255.0000.000

transp.

617 255.0000.090

black

617 256.0000.000

transp.

617 256.0000.090

black

617 264.0000.000

EV 1

1 unit

glass thickness 8 to 12,76 mm incl. inserts

Note: one floor guide is available in the complete sets and accessory kits.

Single components Accessories

List price

Single components Accessories

Photographic print with kind authorization of the Dorint Resort An den Thermen Freiburg (Germany)

Glass fittings with logic

Portavant

Choose the pull handles from our range.

Handles

Handles Figure

Product description

62 Profile length

Product number

617 266.0000.020

Finger pull handle (enclosed) diameter 64 mm

Execution

stainless steel

Unit

1 pair

self-adhesive, no drill holes in glass suitable for any glass thickness weight: 0,4 kg

Note: no glass drilling required

Assembly jig

617 290.0000.000

1 unit

for self-adhesive finger pull handle (Art. No. 617 266.0000.020) for safe positioning on the sliding door, both sides and congruent

Finger pull handle (enclosed)

617 267.0000.110

EV 1

1 pair

diameter 65 mm

617 267.0000.120

C 31

1 pair

for 50 mm diameter drill hole

617 267.0000.020

stainless steel

1 pair

glass thickness 8 to 10 mm weight: 0.4 kg

Note: colour EV 1 suitable for profiles in EV 1; colour C31 suitable for profiles in C31.

List price

Portavant

Glass fittings with logic

Handles Figure

Product description

Profile length

Product number

Execution

Unit

Pull handle

617 268.0000.110

EV 1

1 pair

handle length 400 mm

617 268.0000.020

stainless steel

1 pair

distance between drill holes 200 mm

List price

handle diameter 25 mm drill hole diameter 16 mm glass thickness 8 to 12,76 mm weight: 1,5 kg Note: colour EV 1 suitable for profiles in EV 1.

Pull handle

617 269.0000.110

EV 1

1 pair

handle length 700 mm

617 269.0000.020

stainless steel

1 pair

distance between drill holes 500 mm handle diameter 25 mm drill hole diameter 16 mm glass thickness 8 to 12,76 mm weight: 2,1 kg Note: colour EV 1 suitable for profiles in EV 1.

Handles

Portavant

Glass fittings with logic

Packaging Figure

Product description

Profile length

Product number

Execution

Unit

Optional profile packing material profile cardboard packing in endless ondulated cardboard packing unit = 50 m

Do you require profile packing material to pack the profiles cut by your own?

top for cardboard packing (2 units per profile cardboard packing are necessary) packing unit = 50 units

VWDV.0003

VWDV.0002

1 unit

VXDV.0001

1 unit

PE-spacer (1 piece per 0,5 m profile + 1 piece per cardboard box are necessary) packing unit = 50 units

Packaging sample with 150 mm profiles rounded cover profile

Do you require packaging samples for your customer?

straight cover profile

Packaging

617 600.0000.110

EV 1

1 unit

617 600.0000.120

C 31

1 unit

617 601.0000.110

EV 1

1 unit

617 601.0000.120

C 31

1 unit

List price

Portavant

Glass fittings with logic

Tools Figure

Product description

Profile length

Torque driver 3 Nm (without bit)

Product number

Execution

Unit

617 260.0000.000

1 unit

617 259.0000.000

1 unit

617 261.0000.000

1 unit

617 258.0000.000

1 unit

for the professional mounting of the end

Do you require a torque driver for the professional mounting of end stops?

stops

Blade for 3 Nm (not suitable for torque driver 12 Nm) Torque driver 12 Nm (without bit)

Do you require a torque driver for the professional mounting of clampcarriers?

for the professional mounting of clampcarriers

Blade for 12 Nm (not suitable for torque driver 3 Nm)

Tools

List price

For your notes

Portavant

Glass fittings with logic

For your notes

The company Willach belongs to the leading producers of glass fittings in Europe. Since its establishment in 1889, the manufacture of products to the highest quality and precision standards has been the supreme dictum of the company. Numerous technical innovations and intelligent solutions with regard to detail meant that Willach was able to cement its pioneering reputation at an early stage. With the Vitris product line, Willach today offers a range of high quality fittings for glass sliding doors. Furthermore the product range comprises a comprehensive modular system of showcase fittings, sliding door locks and slot bar systems for discerning interior, shop and trade show furnishings. Vitris products are certified in accordance with ISO standards and are manufactured at our Ruppichteroth (Germany) production site to meet stringent manufacturing standards. This forms the basis for the excellent quality and consistently high level of availability of the complete Vitris range. Contact us and let us advise you! Gebr. Willach GmbH Stein 2 D-53809 Ruppichteroth Germany Tel.: +49 (0)2295 92 08 -421/-422 Fax: +49 (0)2295 92 08 429 vitris@willach.com www.willach.com

Utilise all the benefits

COMFORT STOP

COMFORT STOP The cushioning system for your safety. COMFORT STOP slows the glass door effectively, gently and quietly irrespective of its weight and speed of closure, and does so over a distance of several centimetres.

AUTO CLOSE

AUTO CLOSE The self-closing system to make you feel good. AUTO CLOSE fully closes the glass door effectively, gently and quietly once it has been slowed by the innovative cushioning system

EXACT TRIGGER The triggering mechanism for reliable functioning. Its revolutionary design principle (patent pending) ensures that the cushioning system is always reliably functioning.

EASY INSTALL The solution for ease of assembly without having to cut glass. Turns the installation of glass sliding doors into childâ&#x20AC;&#x2122;s play.

SYSTEM FIT The modular solution for your installation situation. Makes almost any installation possible with modular system components in a variety of combinations.

DESIGN SELECT Perfection and diversity for your design highlights. Enables stylistic highlights with beautifully shaped, sophisticated cover profiles in a curved or straight design and the appropriate, innovative handles in your preferred colour.

DESIGN SELECT

Stamp

Flyers, brochures and drawings are merely product descriptions and represent neither assured properties nor statements of guarantee.