Assembly Instructions and Product Overview
Made in Sweden M
1
The flexible system KEBAflexi-garden, a sturdy and flexible system for your garden. Quickly and easily put together bush supports, tree supports and mini greenhouses using the stable posts and smart connectors. Flexi-garden is weather resistant and will not degrade or need to be replaced. The ready-toassemble kits include everything you need and you can also supplement with loose posts and connectors as required. The flexi-garden posts are made with galvanized steel cores, coated with UV-resistant plastic. The unique, patent pending connectors are designed to be opened and closed many times. All materials used are 100% recyclable. In other words, Flexi-garden is easy to use, good for your plants and good for the environment.
cycl
e
B Y KE
c
BAe
e
u
-
Red
A I NABL ST u s e
Re
NG
T H I NKI
E
R
SU
Posts without end caps are sharp. Wear protective gloves to avoid cuts. The posts must not be used as toys as the sharp edges can easily injure children. 2
Easy to use connector Open, insert Open the connector so that the post can be inserted.
Secure Once the post has been inserted in the connector, place the tensioner in the groove.
Lock Press the upper part of the ribbed tensioner and and press firmly to lock the connector.
Open, adjust Open the locked connector by pressing the lever, while holding the lock by the raised edges. When the connection is open, it can be moved, adjusted and then closed again.
3
Inspiration
4
5
Tree support This tree support is used to secure the stem on newly planted trees. Suitable for all types of trees and bushes with a stem.
• Materials that do not degrade • Stylish and modern • Easy to adjust the height
6
Facts The post is made of galvanized steel sheet coated with UV stabilised plastic. The strap holder is made of UV stabilised plastic and can be adjusted along the height of the post. The 18 mm wide stem strap is tensioned via the connector. Easy to adjust as the tree grows. Position the posts angled outwards at a distance of 10 cm -15 cm from the tree stem. A rubber mallet can be used to knock down the posts if the ground is hard. Clip on the strap holder at an optional height on the post Place the strap around the stem and align the ends before passing through the strap holder. Make sure that the strap is tensioned so that the stem is secured.
90 cm
150 cm
Ground level
35 cm
Ground level
35 cm Part No. 13595500001 Part No. 13595500301 Part No. 13595500002
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer.
Part No. 13595500302 http://redirect.kebaoutdoor.se/tradstod/ Component parts
13595500001 13595500301
Connector with 18 mm strap and cord holder
Strap 18 mm x 750 mm
Post 1200 mm with cap and tip
13595500002 13595500302
Connector with 18 mm strap and cord holder
Strap 18 mm x 750 mm
Post 1800 mm with cap and tip
1 pcs.
1 pcs.
1 pcs.
7
Plant support This plant support is used for smaller plants 50 cm-150 cm. Suitable e.g. for climbing plants or perennials with an upright growth form.
• Stable in all directions • Blends in well • Assembled without tools
8
Facts A hard-wearing stable plant support. Easily assembled, push the posts down into the ground and gather at the top. The posts are made of galvanized steel sheet coated with UV stabilised plastic. The connectors are made of UV stabilised plastic and can easily assembled without tools. Angle the posts to form a pyramid and press them down around the plant. A rubber mallet can be used to knock down the posts if the ground is hard. Clip on the wire clips at an optional height on the post Connect the posts with the supplied connectors. Use the wire clip to secure the strap and support the plant.
120 cm
Ground level
35 cm
Part No. 13550050003 Part No. 13550030003
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer. http://redirect.kebaoutdoor.se/vaxtstod/
Component parts
Connector with flexible joint
Strap and wire clip
Polyester cord
Post 1500 mm with cap and tip
3 pcs.
6 pcs.
3m
3 pcs.
9
Bush support This bush support helps to keep the branches off of the ground. Simplifies mowing and weeding, and prevents berries from being harmed on the ground. Suitable for bushes with wide/thick growth form, for example, currant bushes.
• Materials that do not degrade • Keeps the berries off of the ground • Easy to adjust vertically
10
Facts Bush support that gathers and lifts the branches. The corner posts are positioned at a suitable distance from the bush and the horizontal posts can be adjusted in height once the support is fitted. The post is made of galvanized steel sheet coated with UV stabilised plastic. The connector is manufactured of UV stabilised nylon plastic that can be adjusted and locked at any height along the post. Connect together the posts fitted with caps at both ends on the ground around the bush to form a square.
100 cm
Let the post protrude 5 cm from the connector. Use a rubber mallet to knock the corner posts in next to the outside of the corners, when the frame is on the ground. 120 cm
Position the final 4 connectors on the posts in the corners. Secure the connectors against the posts, lock the connectors on the frame. Let the connector remain unlocked where it runs on the corner post. Lift up the frame to the required height and lock.
Ground level
Readjust and check that all the connectors are locked.
35 cm
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer.
Part No. 13550050001 Part No. 13550030001
http://redirect.kebaoutdoor.se/buskstod/ Component parts
Connector 90 degrees
Post 1000 mm with caps at the ends
Post 1500 mm with cap and tip
8 pcs.
4 pcs.
4 pcs. 11
Plastic sheet and netting lifter Lifts the plastic sheet or netting over the plants, keeping birds and pests away. Prevents the plants from growing into the netting. Ideal for e.g. strawberry plants.
• Assembled quickly • Netting keeps the birds away • Plastic sheet creates a greenhouse climate
12
Facts The plastic sheet and netting lifter can be used with growing collars or directly on open ground. Multiple sets can be used if you want to raise the protection over larger areas. The post is made of galvanized steel sheet coated with UV stabilised plastic. The top connector is made of UV stabilised plastic.
Can be used with a growing collar 1200 mm x 800 mm
120 cm
35 cm Part No. 13550050008 Part No. 13550030008
Ground level
20 cm
Position 2 of the posts with the tips on the desired line. Make sure they enter about 20 cm into the ground. Place one of the longer posts in the top connector and lock the connector. Position the remaining posts parallel with the first at the correct spacing. Cover with netting or plastic sheet and secure with clips. Component parts
Plastic clips for locking the plastic sheet/netting
Post 1200 mm with caps
Post 500 mm with top connector and tip
6 pcs.
2 pcs. 1200 mm
4 pcs. 500 mm
Accessories: Netting ordered separately
Plastic sheet ordered separately
Part No. 13570030005 (Black)
Part No. 13570030006
Polypropylene netting 2200 mm x 1800 mm
Plastic sheet, thickness 0.15 mm 2200 mm x 1800 mm
1 pcs.
1 pcs.
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer. http://redirect.kebaoutdoor.se/plastochnathojare1200/ 13
Trellis This trellis gives good support for climbing and trailing plants. Available in 3 different widths and can be used free standing or attached to a wall.
• Maintenance-free • Free standing or against a wall • Modern and stylish 14
Facts For free standing assembly the trellis can be cast in the ground to give stable anchoring. The post is made of galvanized steel sheet coated with UV stabilised plastic. The connector is manufactured of UV stabilised nylon plastic that can be adjusted and locked individually at any height along the posts. Assemble the trellis lying on a flat surface. Position the posts with tips with the desired spacing parallel to each other. Snap the horizontal posts in the pre-assembled connectors. Position the trellis in the desired location, allowing the tips to indicate where the holes should be if the ground is hard. Remember the wall bracket’s distance from the wall. The posts should enter at least 20 Ground level cm into the ground for stability. Check using a spirit level that the posts are straight, vertically and horizontally. 160-180 cm
100 - 150 - 200 cm
20-40 cm
25 cm
Position the wall bracket at the desired height and secure with plugs and screws. Tie up the plants with supplied cord.
Width 100 cm Part No. 13550050007 Part No. 13550030007
Accessories: Plant support Part No. 13550050013
Trellis cord with bracket. So plants find it easier to climb up the trellis Polyester cord (Black) 4 m Strap/cord holder (Black) 6 pcs.
Width 150 cm Part No. 13550050009 Part No. 13550030009
Width 200 cm Part No. 13550050006 Part No. 13550030006
1 set.
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer. http://redirect.kebaoutdoor.se/vaggspalje/
Component parts
Connector 90 degrees
Polyester cord (Black)
Post 1500 mm with caps
Post 2000 mm with cap and tip
Set with wall bracket
12 pcs (18 pcs 200 cm)
8m
6 pcs.
2 pcs. (3 pcs. 200 cm)
2 pcs.
15
Trellis frame Trellis with vertical cords, ideal for e.g. peas and other trailing plants. Prefect in a flower bed or growing box. Can be completely free standing.
• Vertical or horizontal cord • Stable frame design. • Weatherproof 16
Facts Trellis with stable frame design. Consists of two vertical and two horizontal posts made of galvanized steel sheet and coated with UV stabilised plastic. Polyester cord stretched between the holders. The cord holder is made of UV stabilised plastic. The corner connector is made of UV stabilised nylon plastic. Place the vertical posts with 80 cm spacing. Fit the horizontal posts at the top and just above ground level. Position the holders on the horizontal or vertical posts. Route the cord vertically or horizontally between the holders.
80 cm
120 cm
Ground level
Part No. 13550050010 Part No. 13550030010
30 cm
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer. http://redirect.kebaoutdoor.se/ramspalje/ Component parts
Strap/cord holder
Polyester cord (Black)
Connector 90 degrees
Post 800 mm with caps
Post 1500 mm with cap and tip
12 pcs.
8m
4 pcs.
2 pcs.
2 pcs.
17
Cord trellis (adaptable 0-2 metres) Adaptable trellis that can be used free standing. The width can be adapted as needed up to 2 metres. Suitable for climbing and trailing plants.
• Easy and quick to fit • Variable width • Easy to adjust vertically
18
Facts Trellis, which is easy to assemble and customise as needed. Two posts with individually adaptable brackets that are secured along the post. Polyester cord stretched between the holders. The post is made of galvanized steel sheet coated with UV stabilised plastic. The cord holder is made of UV stabilised plastic. Position the posts with the desired spacing. Angle the poles outwards when inserting in the ground so that they stand vertical when the cord is stretched.
Variable length up to 2 metres.
Fit the strap and cord holders. Route the cord horizontally between the holders.
120 cm Part No. 13550050011 Part No. 13550030011
Ground level Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer.
30 cm
http://redirect.kebaoutdoor.se/tradspalje/ Component parts
Strap/cord holder
Polyester cord (Black)
Post 1500 mm with cap and tip
12 pcs.
14 m
2 pcs.
19
Hot house for growing boxes Easily build a hot house that fits in your growing box 120 cm x 80 cm. Creates a greenhouse climate and provides protection from birds and vermin.
• Easy to fit • High enough for e.g. tomatoes • Can be opened from all sides
20
Facts
Place the 4 corner posts with the tips inside the corners of growing collar or on open ground. Position the longest posts in the centre of the short end between the corner posts. Make sure they enter about 20 cm into the ground.
120-135 cm
100-115 cm
The hot house can be built using growing collars or directly on open ground. If a growing collar is used, the greenhouse can be placed on a hard surface such as slabs or concrete. Fittings are then used to secure the posts. The post is made of galvanized steel sheet coated with UV stabilised plastic. The top connector is made of UV stabilised plastic. Using the cord holders, the cord can be stretched across the hot house so the plants have something to climb on.
Secure the three poles with caps at both ends in the top of the vertical posts. Attach the horizontal roof posts at the top of the located wall posts.
Ground level
10-25 cm
Connect with the short roof posts.
Part No. 13550050025 (growing box ordered separately)
Clip on the plastic hood using the supplied plastic clips.
Part No. 13550030010 (growing box ordered separately) Component parts
Strap/cord holder (Black) with polyester cord (Black)
Plastic clips for locking the plastic sheet
Plastic hood with zip
Post 1200 mm with caps
Post 1200 mm and 1400 mm with top connector and tip
Post 350 mm with top connectors
6 pcs. 5 metres
22 pcs.
1 pcs.
3 pcs.
4 pcs. 1200 mm 2 pcs. 1400 mm
4 pcs. 350 mm
Accessories: Growing box ordered separately Part No. 13593500000 (black)
Part No. 13592500000 (black)
Part No. 13593505000 (natural)
Part No. 13592505000 (natural)
Growing box 600 mm x 800 mm
Growing box 800 mm x 1200 mm 21
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer.
http://redirect.kebaoutdoor.se/drivhus/
Growing collar The growing collars can be easily combined to give a height that suits you. Large and small growing collars can also be combined. Available in natural and black stained finishes.
• Comfortable working height • Reduced ground frost • Less weeds
22
Facts The collar is made of sturdy 20 mm thick pine boards and galvanized steel fittings. Supplied in a pack with corner pins. Available in natural and black stained finishes.
60 cm 80 cm
Black Part No. 13593500000 Natural Part No. 13593505000
120 cm
The growing collar is delivered unassembled to save space during transport. The four sides are easily fitted together with the supplied hinge pins. Place the assembled growing collar on a flat surface. Remove any grass and plants from under the growing collar. Ensure that water can be drained by loosening the substrate if necessary. Place a fibre cloth in the bottom of the box and allow the edges to run up the sides slightly. Staple the cloth to the inside of the collar.
80 cm
Fill the collar with suitable soil for the plants you intend to grow. Black Part No. 13592500000 Scan the QR code Natural for more informaPart No. 13592505000 tion directly on your mobile or use the link below to see more information on your computer.
Accessories: Snail edge
http://redirect.kebaoutdoor.se/odlingskrage/ Hot house for growing collar Part No. 13550050025 Part No. 13550030010
Plastic sheet and netting lifter Part No. 13550050008 Part No. 13550030008
Trellis frame Part No. 13550050010 Part No. 13550030010
Cord trellis Part No. 13550050011 Part No. 13550030011
Part No. 13595720600
Part No. 13570030005
Part No. 13595720800
Part No. 13570030006 Snail edge 600 mm x 800 mm Snail edge 800 mm x 1200 mm
Hot house 800 mm x 1200 mm
Plastic sheet and netting lifter 800 mm x 1200 mm Netting 2200 mm x 1800 mm Plastic sheet 2200 mm x 1800 mm
23
Trellis frame 800 cm width
Cord trellis 0-2000 mm wide
Snail edging for growing collar Snail edging that prevents snails from entering the growing collar. Made of aluzinc treated steel sheet for a long life.
• Keeps snails at bay • Protects the growing box • Material that does not rust
24
Facts A maintenance-free snail guard made of steel with aluzinc surface treatment. The right guard angle keeps snails at bay. Available in two sizes, for small and large growing boxes.
Screwed onto the growing collar using the supplied screws. The angle of the edging prevents snails from entering the growing collar.
60 cm
80 cm
Part No. 13595720600
80 cm
120 cm
Part No. 13595720800
Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer. http://redirect.kebaoutdoor.se/snigelkant/ Component parts
Part No.
Edging strip 600 mm
Edging strip 800 mm
Edging strip 1200 mm
Galvanized screw
13595720600
2 pcs.
2 pcs.
-
14 pcs.
13595720800
-
2 pcs.
2 pcs.
18 pcs.
25
Growing collar construction kit Construction kit to spark your imagination. Experiment with the adjustable corners and boards that you combine to form the shape you want.
• Build the shape you want • Several different lengths • Adjustable corners in both directions 26
Facts Adjustable corners made of galvanized steel. The boards are 20 mm solid pine. Available in four standard lengths, or lengths that you can cut to size yourself.
AluZinc Black
Slide the boards into the corner to the shape you want. The boards can be cut to any length for the size and shape you require. Screw the boards and corners together using the supplied screws from the top and bottom. The structure can be placed on a hard surface and can be used with a hot house and trellises from the KEBA range. The posts are secured with brackets that are available as an accessory.
Accessories: Scan the QR code for more information directly on your mobile or use the link below to see more information on your computer.
Accessories (ordered separately) Part No. 13593600001
Post brackets for growing collar
Part No. 13593600002
http://redirect.kebaoutdoor.se/byggsjalv/
Anchor plate growing collar
Components Part No. 13593600000
Part No. 13595600400
Part No. 13595600600
Part No. 13595600800
Part No. 13595601200
Adjustable corner
Board 20 x 400 mm (exact size 343 mm)
Board 20 x 600 mm (exact size 543 mm)
Board 20 x 800 mm (exact size 743 mm)
Board 20 x 1200 mm (exact size 1143 mm)
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
27
Planting edge Planting edge of Corten steel that takes on an even rust-like appearance over time. Keeps grass from the tree and gives a well-arranged appearance. Protects the stem and planted plot from trimmer cord. Also ideal for planted plots with plants and flowers.
• Latest garden fashion • Clear boundaries • Rusts to golden brown 28
Facts Planting edges are available as semi-circles, straight plates and angled corners. Two semicircles are bolted together around a tree or bush. Easy to fit around existing trees or bushes. Combining the parts can create different shapes. The straight edges can be formed by bending the plate into the required shape. New Corten (on delivery)
The edge protection is available in two different diameters, 500 and 800 mm.
Weather affected Connect the halves together around the Corten
500 cm
tree. Centre the edging guard around the stem. Combine straight edges, halves and corners to form any shape.
7 cm
12 cm
Ground level
Use an edger, shovel or similar to make a channel around the edge of the planting plot. Take care around the tree's root system. Push down the edge. Clear away any grass and weeds inside the planting edge and fill with e.g. decorative bark or stone.
Part No. 13595500006
800 cm
57 cm
12 cm
Part No. 13595500008
7 cm
85 cm
12 cm
Ground level
Part No. 13595500007
Part No. 13595500009
12 cm
115 cm Part No. 13595500010 Adjustable
12 cm
Fixed 90 degrees
12 cm
Part No. 13595500012
Scan the QR code Part No. for more informa13593600011
tion directly on your mobile or use the link below to see more information on your computer.
Component parts
Planting edge semi-circle 2 pcs., screw 4 pcs., nut 4 pcs.
Planting edge 1 pcs. screw 2 pcs., nut 2 pcs.
Planting edge corner Adjustable or 90 degrees 1 pcs., screw 2 pcs., nut 2 pcs.
1 set.
1 set.
1 set. http://redirect.kebaoutdoor.se/planteringskant/ 29
Assortment range parts/accessories Articles
Part No.
Designation
Quantity/pack/pallet
13592505000 natural 13593500000 black
Growing box of wooden height 200 mm 600 mm x 800 mm Natural or black stained finish
1 pcs/50 pcs
13593505000 natural 13592500000 black
Growing box of wooden height 200 mm 800 x 1200 mm Natural or black stained finish
1 pcs/30 pcs
Corner for cultivating in a growing box. The corner can be adjusted to different angles.
1 pcs/ 360 pcs
13595600099
13595600400 13595600600 13595600800 13595601200
Black stained boards height 200 mm Length 400 mm Length 600 mm Length 800 mm Length 1200 mm
2 pcs/120 pcs*/240 pcs 2 pcs/80 pcs*/160 pcs 2 pcs/240 pcs 2 pcs/160 pcs
Aluzinc treated edge guard against snails. 13595720600 13595720800
600 mm x 800 mm 800 mm x 1200 mm
1 set/500 sets 1 set/500 sets
13593600002
Anchor plate growing collar
4 pcs.
13593600001
Post brackets for growing collar
4 pcs.
30
*Half pallet
Components
Part No.
Designation
Quantity/pack/ pallet
12035050500 12050050500 12080050500 12100050500 12120050500 12140050500 12150050500 12200050500
Post 350 mm Post 500 mm Post 800 mm Post 1000 mm Post 1200 mm Post 1400 mm Post 1500 mm Post 2000 mm
20 pcs. 20 pcs. 20 pcs. 20 pcs. 20 pcs. 20 pcs. 20 pcs. 20 pcs.
12500030000
End cap with washer
20 pcs.
13560030000
Tip
20 pcs.
13520030000
Connector 90 degrees
20 pcs.
135300330000
Connector with flexible joint
20 pcs.
13500030001
Top connector
20 pcs.
13540030000
Clip for plastic sheet and netting
20 pcs.
13580030000
Connector with 18Â mm strap and cord holder
20 pcs.
13570030000
Polyester cord 2.8 mm
50 m/500 m
13591500000
Strap 75 cm x 18 mm for stems
1 pcs.
13550030016
1 set with 1 wall mount incl. screws and accessories
1 set.
13590500002
Plastic for plastic sheet and netting lifter 0.15 mm 2200 mm x 1800 mm UV stabilised
1 sheet
13590500002
Polypropylene netting 2200 x 1800 mm
1 pcs.
13590800500
Transparent/black plastic hood with zip for hot house
1 pcs.
13590800000
Transparent/white plastic hood with zip for hot house
1 pcs.
31
KEBA Sweden AB Box 122 333 22 Sm책landsstenar, Sweden Tel: +46 371 510910 www.kebaoutdoor.se Sold by:
32