5
D-STAR OPERATION <BASIC>
“TO” (Destination) setting (Continued)
DDUsing the TX History
The L, R, C or D in the instructions indicate the part of the controller.
The TX History stores the name and/or call sign of up to 20 “TO” (Destination) settings that were used when you made the calls.
L: Left side, R: Right side, C: Center bottom D: Display (Touch screen)
NOTE: If you never transmit a call in the DV mode, you cannot select “TO” (destination) from the TX History.
Touch “TO.”
Example: S elect the “Dallas” repeater in the TX History. qqPush DR (C) to select the DR mode. wwCheck whether or not “TO” is selected. • If “TO” is not selected, touch the “TO” field.
“TO” is selected.
eeTouch the “TO” field. • The “TO SELECT” screen appears.
rrTouch [Z] to display the next page. tt Touch “TX History.” • The “TX HISTORY” screen appears.
yy Touch the destination name or call sign.
Touch [Z].
• Example: “Dallas” • The transceiver returns to the DR mode screen, and “Dallas” is displayed in “TO.”
Touch “TX History.”
If you push QUICK (C) on the TX HISTORY screen, you can add the selected TX HISTORY data to memory, or delete it from there.
The Sub name is displayed when a repeater is selected.
“Dallas” is set in “TO.”
5-18
“Dallas” repeater’s call sign is displayed.