JCB - 437 HT Spec Sheet (US) Mar 2013 by JCB North America

JCB WHEEL LOADER - Tier 4i| 437 HT MAX ENGINE POWER: 173 hp (129 kW)

MAX OPERATING WEIGHT: 40,534 lb (18,386 kg)

STANDARD LOADER CAPACITY: 3.5 yd3 (2.7 m3)

STATIC DIMENSIONS – Standard Height Arm

STATIC DIMENSIONS – Super High Lift Arm (SHL) & High Lift Arm (HL)

437-HT

E H1

STATIC DIMENSIONS – Standard Height Arm

STATIC DIMENSIONS – Super High Lift Arm (SHL) & High Lift Arm (HL) HT

SHL

25-4 (7726)

23-11 (7282

ft-in (mm)

7-9 (2366)

4-11 (1499)

ft-in (mm)

9-10 (3000)

D Axle to Counterweight Face

ft-in (mm)

5-11 (1816)

E Minimum Ground Clearance

ft-in (mm)

1-6 (459)

F Height Over Exhaust

ft-in (mm)

10-7 (3236)

4-7 (1400)

G Width Over Cab

ft-in (mm)

4-7 (1400)

8-6 (2597)

H Width Over Tires

ft-in (mm)

8-6 (2597)

ft-in (mm)

6-9 (2070)

H1 Wheel Track

ft-in (mm)

6-9 (2070)

J Height Over Cab

ft-in (mm)

10-11 (3335)

J Height Over Cab

ft-in (mm)

10-11 (3335)

Hinge Pin Height (maximum)

ft-in (mm)

13-1 (3996)

Hinge Pin Height (maximum)

ft-in (mm)

17-1 (5213)

15-3 (4650)

Overall Operating Height

ft-in (mm)

17-4 (5305)

Overall Operating Height

ft-in (mm)

21-5 (6522)

19-6 (5959)

Front Axle Weight

lb (kg)

15,258 (6921)

Front Axle Weight

lb (kg)

17556 (8737)

17040 (7729)

Rear Axle Weight

lb (kg)

17,344 (7867)

Rear Axle Weight

lb (kg)

16704 (7071)

16601 (7330)

Total Weight

lb (kg)

32,602 (14,788)

Total Weight

lb (kg)

34271 (15812)

33640 (15259)

Inside Radius

ft-in (mm)

9-3 (2825)

Inside Radius

ft-in (mm)

9-3 (2825)

Maximum Radius

ft-in (mm)

19-3 (5860)

Maximum Radius

ft-in (mm)

20-4 (6196)

19-6 (6000)

Articulation Angle

± 40°

Articulation Angle

± 40°

A Overall Length

ft-in (mm)

B Axle to Pivot Pin C Wheel Base

22-9 (6926)

A Overall Length

ft-in (mm)

3-9 (1143)

B Axle to Pivot Pin

ft-in (mm)

9-10 (3000)

C Wheel Base

D Axle to Counterweight Face

ft-in (mm)

5-11 (1816)

E Minimum Ground Clearance

ft-in (mm)

1-6 (459)

F Height Over Exhaust

ft-in (mm)

10-7 (3236)

G Width Over Cab

ft-in (mm)

H Width Over Tires

ft-in (mm)

H1 Wheel Track

*Data based on machine equipped with 3.1 yd3 (2.4 m3) bucket with toe plates and Michelin 20.5R25 XHA2 (L3) radial tires.

JCB WHEEL LOADER - Tier 4i| 437 HT

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

LOADER DIMENSIONS – Standard Height Arm

Tire Size

M T Q

437-HT -

R O

Type

Rating

Dimensions

Straight

Full Turn

Vertical

Width

lb (kg)

in (mm)

20.5R25

Michelin

XHA2

20.5-25

Goodyear

SGL (12ply)

-414 (-188)

-280 (-127)

-238 (-108)

-0.354 (-9)

+1.3 (+33)

20.5R25

Michelin

XLDD2A

+591 (+268)

+1 (+25)

+0.28 (+7)

20.5R25

JCB

Earthmover

+203 (+92)

+137 (+62)

+117 (+53)

+1 (+25)

20.5R25

Michelin

XTLA

-265 (-120)

-179 (-81)

-152 (-69)

-0.2 (-5)

+0.2 (+5)

20.5-25

JCB

Sightmaster (16ply)

-344 (-156)

-231 (-105)

-198 (-90)

-0.2 (-4)

+0.1 (+3)

20.5R25

Nokian

Loadergrip

-450 (-204)

-304 (-138)

-260 (-118)

+0.5 (+12)

-0.2 (-6)

20.5R25

Michelin

XMINED2

+1543 (+700) +1041 (+472) +891 (+404)

+1.2 (+31)

+1.1 (+29)

+838 (+380) +1,506 (+683) +1,246 (+565)

Optional Bolt-on Counterweight

Manufacturer

Tipping Loads

Op Weight

+1,023 (+464) +690 (+313)

-.2 (-6)

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires and XD counterweight.

Bucket Mounting

Direct

Quickhitch

Bucket Type

General Purpose

General Turpose

Bucket Equipment

Tipped Teeth

Reversible Toeplate

Bucket Capacity (SAE heaped)

yd3 (m3)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

Bucket Capacity (struck)

yd3 (m3)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

Bucket Width

8-10 (2700)

Bucket Weight

Maximum Material Density

Tipping Load Straight

Tipping Load Full Turn

Payload

ft-in (mm)

Reversible Toeplate Reversible Toeplate

9-0 (2740)

8-10 (2700)

9-0 (2740)

8-10 (2700)

kg (lb)

2532 (1151)

2693 (1224)

2559 (1163)

2719 (1236)

2473 (1124)

2638 (1199)

2499 (1136)

2664 (1211)

lb/yd3 (kg/m3)

3,509 (2,082)

3,058 (1,814)

3,363 (1,995)

2,945 (1,747)

3,300 (1,958)

2,876 (1,706)

3,162 (1,876)

2,768 (1,642)

lb (kg)

25,280 (11,467)

24,934 (11,310)

25,280 (11,467)

24,934 (11,310)

23,872 (10,828)

23,537 (10,676)

23,872 (10,828)

23,537 (10,676)

lb (kg)

21,116 (9,578)

20,803 (9,436)

21,116 (9,578)

20,803 (9,436)

19,861 (9,009)

19,555 (8,870)

19,861 (9,009)

19,555 (8,870)

lb (kg)

10,558 (4,789)

10,401 (4,718)

10,558 (4,789)

10,401 (4,718)

9,930 (4,504)

9,778 (4,435)

9,930 (4,504)

9,778 (4,435)

Maximum Break Out Force

lbf (kN)

33,048 (147)

30,240 (134)

33,048 (147)

30,240 (134)

29,592 (131)

27,432 (122)

29,592 (131)

27,432 (122)

Dump Angle Maximum

degrees

50°

Roll Back Angle Full Height

degrees

58°

Roll Back at Carry

degrees

48°

Roll Back at Ground Level

degrees

43°

Load Over Height

ft-in (mm)

12-3 (3,755)

Dump Height (45° dump)

ft-in (mm)

9-2 (2,806)

9-0 (2,742)

9-8 (2,974)

9-6 (2,883)

8-11 (2,721)

8-9 (2,676)

9-5 (2,862)

9-2 (2,798)

Dig Depth

ft-in (mm)

0-5 (132)

0-4 (106)

0-5 (132)

0-4 (106)

Reach at Dump Height

ft-in (mm)

3-9 (1,148)

4-0 (1,207)

3-5 (1,044)

3-7 (1,103)

4-0 (1,225)

4-3 (1,283)

3-8 (1,121)

3-10 (1,179)

Reach Maximum (45° dump) – Horizontal Arm

ft-in (mm)

Operating Weight (includes 176 lb operator and full fuel tank)

lb (kg)

6-8 (1,987)

6-9 (2,051)

6-2 (1,883)

6-5 (1,947)

5-10 (1,772)

7-0 (2,136)

6-5 (1,968)

6-8 (2,032)

32,580 (14,778)

32,741 (14,851)

32,602 (14,788)

32,741 (14,851)

32,657 (14,813)

33,180 (15,050)

32,657 (14,813)

33,180 (15,050)

JCB WHEEL LOADER - Tier 4i | 437 HT

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

LOADER DIMENSIONS – High Lift Arm (HL)

Tipping Loads

Dimensions

Tire Size

M T Q

437-HT -

R O S

Manufacturer

Type

Rating

Op Weight

Straight

Full Turn

Vertical

Width

lb (kg)

in (mm)

20.5R25

Michelin

XHA2

20.5-25

Goodyear

SGL (12ply)

-414 (-188)

-227 (-103)

-194 (-88)

-0.354 (-9)

+1.3 (+33)

20.5R25

Michelin

XLDD2A

+481 (+218)

+1 (+25)

+0.28 (+7)

20.5R25

JCB

Earthmover

+203 (+92)

+110 (+50)

+95 (+43)

+1 (+25)

20.5R25

Michelin

XTLA

-265 (-120)

-146 (-66)

-123 (-56)

-0.2 (-5)

+0.2 (+5)

20.5-25

JCB

Sightmaster (16ply)

-344 (-156)

-190 (-86)

-161 (-73)

-0.2 (-4)

+0.1 (+3)

20.5R25

Nokian

Loadergrip

-450 (-204)

-247 (-112)

-212 (-96)

+0.5 (+12)

-0.2 (-6)

20.5R25

Michelin

XMINED2

+723 (+328)

+1.2 (+31)

+1.1 (+29)

Optional Bolt-on Counterweight

+1,023 (+464) +560 (+254)

+1543 (+700) +847 (+384)

+838 (+380) +1,226 (+556) +1,014 (+460)

-.2 (-6)

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires and XD counterweight.

Bucket Mounting

Direct

Quickhitch

Bucket Type

General Purpose

Bucket Equipment

Tipped Teeth

Reversible Toeplate

Tipped Teeth

Bucket Capacity (SAE heaped)

yd3 (m3)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

Bucket Capacity (struck)

yd3 (m3)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

Bucket Width

8-10 (2700)

Bucket Weight

Maximum Material Density

ft-in (mm)

Reversible Toeplate Reversible Toeplate

9-0 (2740)

8-10 (2700)

9-0 (2740)

8-10 (2700)

kg (lb)

2532 (1151)

2693 (1224)

2559 (1163)

2719 (1236)

2473 (1124)

2638 (1199)

2499 (1136)

2664 (1211)

lb/yd3 (kg/m3)

2,667 (1,582)

2,324 (1,379)

2,555 (1,516)

2,237 (1,327)

2,508 (1,488)

2,353 (1,396)

2,404 (1,426)

2,104 (1,248)

Tipping Load Straight

lb (kg)

19,213 (8,715)

18,949 (8,595)

19,213 (8,715)

18,949 (8,595)

18,142 (8,229)

17,888 (8,114)

18,142 (8,229)

17,888 (8,114)

Tipping Load Full Turn

lb (kg)

16,047 (7,279)

15,809 (7,171)

16,047 (7,279)

15,809 (7,171)

15,095 (6,847)

14,861 (6,741)

15,095 (6,847)

14,861 (6,741)

Payload

lb (kg)

8,023 (3,639)

7,904 (3,585)

8,023 (3,639)

7,904 (3,585)

7,546 (3,423)

7,430 (3,370)

7,546 (3,423)

7,430 (3,370)

Maximum Break Out Force

lbf (kN)

33,048 (147)

30,240 (134)

33,048 (147)

30,240 (134)

29,592 (131)

27,432 (122)

29,592 (131)

27,432 (122)

Dump Angle Maximum

degrees

45°

Roll Back Angle Full Height

degrees

60°

Roll Back at Carry

degrees

54°

Roll Back at Ground Level

degrees

45°

Load Over Height

ft-in (mm)

14-6 (4,409)

Dump Height (45° dump)

ft-in (mm)

11-4 (3,460)

11-2 (3,396)

11-11 (3,628)

11-7 (3,537)

11-1 (3,375)

10-10 (3,311)

11-6 (3,516)

11-4 (3,452)

Dig Depth

ft-in (mm)

0-5 (127)

0-4 (101)

0-5 (127)

0-4 (101)

Reach at Dump Height

ft-in (mm)

3-9 (1,148)

4-0 (1,207)

3-5 (1,044)

3-7 (1,103)

4-0 (1,225)

4-3 (1,283)

3-8 (1,121)

3-10 (1,179)

Reach Maximum (45° dump) – Horizontal Arm

ft-in (mm)

Operating Weight (includes 176 lb operator and full fuel tank)

lb (kg)

8-2 (2,477)

8-4 (2,541)

7-9 (2,373)

8-0 (2,437)

7-5 (2,262)

8-7 (2,626)

8-11 (2,458)

8-3 (2,522)

33,640 (15,259)

33,779 (15,322)

33,640 (15,259)

33,779 (15,322)

33,695 (15,284)

34,218 (15,521)

33,695 (15,284)

34,218 (15,521)

JCB WHEEL LOADER - Tier 4i | 437 HT

CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS

LOADER DIMENSIONS – Super High Lift Arm (SHL)

Tipping Loads

Dimensions

Tire Size

M T Q

437-HT -

R O S

Manufacturer

Type

Rating

Op Weight

Straight

Full Turn

Vertical

Width

lb (kg)

in (mm)

20.5R25

Michelin

XHA2

20.5-25

Goodyear

SGL (12ply)

-414 (-188)

-192 (-87)

-165 (-75)

-0.354 (-9)

+1.3 (+33)

20.5R25

Michelin

XLDD2A

+408 (+185)

+1 (+25)

+0.28 (+7)

20.5R25

JCB

Earthmover

+203 (+92)

+95 (+43)

+82(+37)

+1 (+25)

20.5R25

Michelin

XTLA

-265 (-120)

-123 (-56)

-106 (-48)

-0.2 (-5)

+0.2 (+5)

Sightmaster (16ply) L3

-344 (-156)

-161 (-73)

-137 (-62)

-0.2 (-4)

+0.1 (+3)

-450 (-204)

-209 (-95)

-179 (-81)

+0.5 (+12)

-0.2 (-6)

+615 (+279)

+1.2 (+31)

+1.1 (+29)

20.5-25

JCB

20.5R25

Nokian

Loadergrip

20.5R25

Michelin

XMINED2

Optional Bolt-on Counterweight

+1,023 (+464) +476 (+216)

+1543 (+700) +719 (+326)

+838 (+380) +1,038 (+471) +860 (+390)

-.2 (-6)

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires and XD counterweight.

Bucket Mounting

Direct

Quickhitch

Bucket Type

General urpose

General Purpose

Bucket Equipment

Tipped Teeth

Bucket Capacity (SAE heaped)

yd3 (m3)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

3.0 (2.3)

3.4 (2.6)

3.1 (2.4)

3.5 (2.7)

Bucket Capacity (struck)

yd3 (m3)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

2.593 (1.984)

2.967 (2.270)

2.691 (2.057)

3.068 (2.346)

Bucket Width

8-10 (2700)

Bucket Weight

Maximum Material Density

ft-in (mm)

Reversible Toeplate Reversible Toeplate

9-0 (2740)

8-10 (2700)

9-0 (2740)

8-10 (2700)

kg (lb)

2532 (1151)

2693 (1224)

2559 (1163)

2719 (1236)

2473 (1124)

2638 (1199)

2499 (1136)

2664 (1211)

lb/yd3 (kg/m3)

2,171 (1,288)

1,893 (1,123)

2,082 (1,235)

1,822 (1,081)

2,043 (1,212)

1,778 (1,055)

1,957 (1,161)

1,713 (1,016)

Tipping Load Straight

lb (kg)

15,977 (7,247)

15,759 (7,148)

15,977 (7,247)

15,759 (7,148)

15,086 (6,843)

14,875 (6,747)

15,086 (6,843)

14,875 (6,747)

Tipping Load Full Turn

lb (kg)

13,071 (5,929)

12,877 (5,841)

13,071 (5,929)

12,877 (5,841)

12,293 (5,576)

12,104 (5,490)

12,293 (5,576)

12,104 (5,490)

Payload

lb (kg)

6,535 (2,964)

6,437 (2,920)

6,535 (2,964)

6,437 (2,920)

6,146 (2,788)

6,052 (2,745)

6,146 (2,788)

6,052 (2,745)

Maximum Break Out Force

lbf (kN)

34,425 (153)

31,247 (139)

34,425 (153)

31,247 (139)

30,573 (136)

28,550 (124)

30,573 (136)

28,550 (127)

Dump Angle Maximum

degrees

50°

Roll Back Angle Full Height

degrees

58°

Roll Back at Carry

degrees

48°

Roll Back at Ground Level

degrees

43°

Load Over Height

ft-in (mm)

16-4 (4976)

Dump Height (45° dump)

ft-in (mm)

13-2 (4,023)

13-0 (3,959)

13-9 (4191)

13-5 (4100)

12-11 (3,938)

12-9 (3,874)

13-5 (4079)

13-2 (4015)

Dig Depth

ft-in (mm)

0-4 (105)

0-3 (79)

0-4 (105)

0-3 (79)

Reach at Dump Height

ft-in (mm)

3-10 (1,172)

4-0 (1,231)

3-6 (1068)

3-8 (1127)

4-1 (1,249)

4-3 (1,307)

3-9 (1145)

3-11 (1230)

Reach Maximum (45° dump) – Horizontal Arm

ft-in (mm)

Operating Weight (includes 176 lb operator and full fuel tank)

lb (kg)

9-8 (2,952)

9-11 (3,016)

9-4 (2848)

9-7 (2912)

9-0 (2,737)

10-2 (3,101)

9-7 (2933)

2997 ( 9-10)

34,859 (15,812)

34,998 (15,875)

34,859 (15,812)

34,998 (15,875)

34,915 (15,837)

35,437 (16,074)

34,915 (15,837)

35,437 (16,074)

JCB WHEEL LOADER - Tier 4i | 437 HT

LOADER

STEERING

Widely spaced four ram geometry provides the combination of excellent visibility with high bucket torque characteristics throughout the working arc. The pin, bushing and seal design on all pivot points provide extended maintenance intervals.

Priority steering hydraulic system with emergency steering. Piston pump meters flow through steer valve @ 2755 psi (190 bar) to provide smooth, low-effort response. Steering angle ± 40°. Steering cylinders located high in the chassis fabrication to provide protection from damage. Adjustable tilt and slide steering column.

ENGINE 6-cylinder, charge air cooled, variable geometry turbo charger, electronically controlled high pressure common rail injection, cooled exhaust gas recirculation and diesel oxidation catalyst. Type

4 Stroke Direct Injection

Model

QSB 6.7

Capacity

liters

Turbo Charged

Cylinders

Max Gross Power to SAE J1995/ISO 14396

hp (kW) @ 1600 rpm

173 (129)

Rated Gross Power to SAE J1995/ISO 14396

hp (kW) @ 2100 rpm

173 (129)

hp (kW) @ 2100 rpm

160 (119)

lbf.ft (Nm) @ 1500 rpm

591 (801)

Max Torque

Hydraulic power braking on all wheels, operating pressure 870 psi (60 bar). Dual circuit with accumulator back-up provide maximum safety under all conditions. Outboard mounted, oil immersed, multi-plate disc brakes with organic brake linings. Parking brake, mechanical disc-type operating on transmission output shaft.

6.7

Aspiration

Net Power to SAE J1349/EEC 80/1269

BRAKES

TIRES A variety of tire options are available including: 20.5 x 25 x 12 ply (L2). 20.5 x 25 SGL (L2). 20.5R25 XTLA (L2). 550/65R25 XLD (L3). 20.5R25 XHA (L3). 20.5R25 XRDIA (L4). 20.5R25 XMINED2 (L5). 20.5R25 RL-K (L5)

Emissions: US EPA Tier 4i, EU Stage IIIB

LOADER HYDRAULICS Twin variable displacement piston pumps feed a “load sensing” system providing a fuel efficient and responsive distribution of power as required. Main services are servo actuated from a single lever (joystick) loader control. Auxiliary circuits controlled via additional lever or joystick mounted electrical buttons. Accumulator back-up is available to control loader in the event of loss of pump pressure.

TRANSMISSION 4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter 4 forward and 3 reverse gears. Type Smooth Shift Powershift Make & Model

ZF 4WG 190

Torque Converter Stall Ratio

2.873 : 1

1st Gear

mph (km/h)

4.27 (6.87)

2nd Gear

mph (km/h)

7.97 (12.82)

3rd Gear

mph (km/h)

15.27 (24.58)

4th Gear (forward only)

mph (km/h)

23.54 (37.88)

AXLES

Pump 1 Max Flow

gal/min (l/min)

Pump 1 Max Pressure

lb/in2 (bar)

Pump 2 Max Flow

Make & Model ZF MTL 3085 II Front / MTL 3075 II Rear Overall Axle Ratio 20.184 : 1 Front / 20.365 : 1 Rear 21°

35 (132) 3625 (250)

gal/min (l/min)

Pump 2 Max Pressure

35 (132)

lb/in2 (bar)

2320 (160)

Hydraulic Cycle Times at Full Engine Revs

Seconds

Arms Raise (full bucket)

6.4

Bucket Dump (full bucket)

2.3

Arms Lower (empty bucket)

4.6

Total Cycle

13.3

Cylinder Dimensions

Type Open, limited slip, or automatic differential locking

Rear Axle Oscillation

Pump Type Twin Variable Displacement Piston Pumps

Bore

Rod

Closed Centers

Stroke

Bucket Cylinder x1

in (mm)

4.3 (110)

2.6 (65)

68.5 (1740)

41.6 (1056)

Lift Cylinder x2

in (mm)

5.1 (130)

2.8 (70)

49.6 (1259)

32.0 (813)

Steer Cylinder x2

in (mm)

3.1 (80)

2.0 (50)

24.4 (621)

12.3 (312)

JCB WHEEL LOADER - Tier 4i | 437 HT

ELECTRICAL SYSTEM

STANDARD EQUIPMENT

24 V negative ground system, 70 Amp alternator with 2 x 110 Amp hour low maintenance batteries. Isolator located in rear of machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen, twin filament working lights, front/rear wash/wipe, heated rear window, full headlights, clock, gauge and warning light monitoring. Connectors to IP67 standard. System Voltage

Alternator Output

Battery Capacity

2 x 110

Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high torque true parallel lift geometry combines with excellent visibility between the arms. Engine: Air cleaner – 2 stage dry type – cyclonic with primary and safety elements, stainless steel muffler and chromed exhaust stack, sedimenter, twin bowl fuel filters, fan guards. Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator switch, direction changes and kickdown on gear selector and loader control lever. Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear. Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking brake disc on transmission output shaft.

CAB

Hydraulics: Piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support, 3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear frame.

Resiliently mounted ROPS/FOPS structure tested in accordance with EN3471:2008/EN3449:2008 (LEVEL 2). Deluxe operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit is via large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windshield and low waistline. Extensive instrumentation includes electronic monitoring panel and LCD display (EMS). Heating / ventilation provides balanced and filtered air distribution throughout the cab via a powerful 37,567 BTU/HR (8kW) capacity heater. The unitary construction allows easy sealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controls can be isolated for safe road travel. Noise level measured in accordance with 86/662/EEC, amendment 95/27/EC Interior Pressure Level: 73 Lp (A) Exterior Power Level: 105 Lw (A)

Steering: Adjustable steering column, “soft feel” steering wheel, 5 turns lock to lock, resilient stops on max lock. Cab: ROPS/FOPS safety structure, cigar lighter, ashtray, interior reading light, center mounted master warning light. Electronic monitoring panel with LCD message display. Two speed intermittent front windshield wiper and self park, single speed rear windshield wiper and self park. 3 speed heater/window defroster with replaceable air filter, LH and RH opening windows, sun visor, sun blind, internal rear view mirror, heated external mirrors, adjustable suspension seat with belt, headrest and armrest, operator storage facilities, laminated windshield, loader control isolator, horn. Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery isolator, radio wiring and speakers, 70 amp alternator, rotating beacon. Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs, engine and transmission underguarding.

ATTACHMENTS An extensive range of attachments including pallet forks, crane jibs, high dumping buckets and timber grapples are available to fit directly or via the JCB quickhitch mounting.

SERVICE FILL CAPACITIES

OPTIONAL EQUIPMENT

gal (l)

Hydraulic System

55 (210)

Fuel Tank

61 (230)

Engine Oil Sump

4.8 (18)

Transmission Oil System

9.5 (36)

Axle Oil (front)

9.2 (35)

Axle Oil (rear)

6.1 (23)

Engine Coolant System

9 (35)

Auxiliary 4th spool hydraulic service, air conditioning, limited slip differentials front/rear axles, additional counterweight,oil bath air cleaner, turbo 2 pre-cleaner, visibowl pre-cleaner, tooth guard, replaceable bucket wearparts, sealed alternator, epoxy coated radiator/coolers, Smooth ride system (SRS), hydraulic quickhitch, full rear fenders, high lift arms, super high lift arms, reversing camera (color), auto greasing system, auxiliary control buttons on joystick, spark arrestor, 24 V to 12 V in cab converter, cab screen guards, air suspension seat, cab filtration options, fire extinguisher.

JCB WHEEL LOADER - Tier 4i | 437 HT

LOADER DIMENSIONS – FORK FRAME WITH FORKS

Assumes Michelin 20.5R25 XHA (L3) tires

437-HT -

A B

Parallel Fork

Roll Back Fork

Fork Carriage Width

ft-in (mm)

4-11 (1500)

Length of Tines

ft-in (mm)

4-0 (1220)

Reach at Ground Level

ft-in (mm)

2-7 (791)

2-7 (798)

Reach at Arms Horizontal

ft-in (mm)

5-4 (1613)

5-4 (1620)

Below Ground Level

ft-in (mm)

0-3⁄8 (8)

0-5⁄8 (16)

Arms, Horizontal Height

ft-in (mm)

6-5 (1946)

6-4 (1936)

Arms, Maximum Height

ft-in (mm)

12-7 (3828)

12-6 (3818)

Reach at Maximum Height

ft-in (mm)

2-10 (862)

2-10 (869)

Payload**

lb (kg)

11,025 (5000)

Tipping Load Straight

lb (kg)

18,935 (8589)

Tipping Load Full Turn (40°)

lb (kg)

16,020 (7267)

16020 (7267)

Attachment Weight

lb (kg)

1063 (482)

**At the center-of-gravity distance 1 ft 8 in (500 mm). Based on 80% of full turn tipping load as defined by ISO 8313. Manual fork spacings at 2 in (50 mm) increments. Fork section 4 in x 2 in (100 mm x 50 mm).

HIGH LIFT LOADER DIMENSIONS – FORK FRAME WITH FORKS F

Assumes Michelin 20.5R25 XHA (L3) tires

437-HT

A B

Parallel Fork

Roll Back Fork

Fork Carriage Width

ft-in (mm)

4-11 (1500)

Length of Tines

ft-in (mm)

4-0 (1220)

Reach at Ground Level

ft-in (mm)

3-9 (1147)

3-9 (1154) 6-11 (2110)

Reach at Arms Horizontal

ft-in (mm)

6-11 (2103)

Below Ground Level

ft-in (mm)

0-1⁄12 (3)

0-1⁄3 (11)

Arms, Horizontal Height

ft-in (mm)

6-5 (1946)

6-4 (1936)

Arms, Maximum Height

ft-in (mm)

14-8 (4482)

14-8 (4472)

Reach at Maximum Height

ft-in (mm)

2-10 (862)

2-10 (869)

Payload**

lb (kg)

10,251 (4650)

Tipping Load Straight

lb (kg)

15,147 (6871)

Tipping Load Full Turn (40°)

lb (kg)

12,815 (5813)

Attachment Weight

lb (kg)

1063 (482)

JCB WHEEL LOADER - Tier 4i | 437 HT

SUPER HIGH LIFT LOADER DIMENSIONS – FORK FRAME WITH FORKS

Assumes Michelin 20.5R25 XHA (L3) tires

437-HT -

A B

Parallel Fork

Roll Back Fork

Fork Carriage Width

ft-in (mm)

4-11 (1500)

Length of Tines

ft-in (mm)

4-0 (1220)

Reach at Ground Level

ft-in (mm)

6-7 (2014)

6-8 (2021) 8-6 (2585)

Reach at Arms Horizontal

ft-in (mm)

8-5 (2578)

Below Ground Level

ft-in (mm)

-0-3⁄4 (-19)

-0-1⁄2 (-11)

Arms, Horizontal Height

ft-in (mm)

6-5 (1946)

6-4 (1936)

Arms, Maximum Height

ft-in (mm)

16-7 (5045)

16-6 (5035)

Reach at Maximum Height

ft-in (mm)

2-11 (886)

2-11 (893)

Payload**

lb (kg)

7934 (3599)

Tipping Load Straight

lb (kg)

11,967 (5428)

Tipping Load Full Turn (40°)

lb (kg)

9919 (4499)

Attachment Weight

lb (kg)

968 (440)

THE BEST BACK-UP IN THE BUSINESS Buy any JCB model and you’ll get a complete deal that extends beyond that of any rival. FINANCE Your JCB Dealer can meet your financial needs through a variety of plans for leasing, lease purchases with or without options, installment sales contracts and rental programs.

PARTS JCB Dealers’ convenient locations offer excellent ‘over the counter’ parts availability.

WARRANTY New industry best standard 2 year warranty. Includes 3 year structural warranty. Full JCB machine range covered. First year warranty covers unlimited hours, second year covered up to 2000 hours

REGIONAL PARTS DEPOTS For the breakdown part your dealer may not have in stock, JCB has SDD ‘Same Day Dispatch,’ from one of two parts distribution centers in the United States and one in Canada. SERVICE

JCB Dealer service people are committed to keeping your JCB up and running. JCB Dealer mechanics are enrolled in on-going training programs and supported by experienced JCB Service Representatives based throughout North America.

JCB WHEEL LOADER - Tier 4i | 437 HT

BUCKET SELECTOR

STANDARD ARM

SUPER HIGH LIFT ARM

437 HT - SUPER HiLi FT ARM

437 HT - STANDARD HEIGHT ARM

2.8

Bucket capacity (m3)

100%

2.7 2.6 2.5 2.4

1200

1400

1600 1800 2000 Material density (kg/m3 )

2.1 2.0

110%

1.9

Bucket fill factors

1.8 1.7

1200

2200

95%

1400

1600 1800 2000 Material density (kg/m3 )

2200

BUCKET SELECTOR Material

Loose Density

Fill Factor

Loose Density

Fill Factor

lb/yd3

kg/m3

Material

lb/yd3

kg/m3

Snow (fresh)

337

200

110

Sodium Chloride (dry) (salt)

2192

1300

Peat (dry)

674

400

100

Cement Portland

2428

1440

100

Sugar Beet

894

530

100

Limestone (crushed)

2580

1530

100

Coke (loose)

961

570

Sand (dry)

2613

1550

100

Barley

1012

600

Asphalt

2698

1600

100

Petroleum Coke

1146

680

Gravel (dry)

2782

1650

Wheat

1231

730

Clay (wet)

2832

1680

110

Coal Bitumous

1290

765

100

Sand (wet)

3187

1890

110

Fertilizer (mixed)

1737

1030

Fire Clay

3507

2080

100

Coal Anthracite

1764

1046

100

Copper (concentrate)

3878

2300

Earth (dry) (loose)

1939

1150

100

Slate

4721

2800

100

Nitrate Fertilizer

2180

1250

Magnetite

5402

3204

100

JCB WHEEL LOADER - Tier 4i | 437 HT

A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man business into one of the world’s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the world’s most impressive success stories.

JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www.jcb.com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. DWUSA 3243 05/13