JCB WHEEL LOADER | 411 HT MAX ENGINE POWER: 100 hp (74 kW)
MAX OPERATING WEIGHT: 19,255 lb (8,734 kg)
MAX LOADER CAPACITY: 2.2 yd3 (1.7 m3)
STATIC DIMENSIONS – Standard Height Arm
STATIC DIMENSIONS – High Lift Arm
G
G
J
J
F
F
E
E H1
C
B
D
H1
A
H
C
B
STATIC DIMENSIONS – Standard Height Arm
D
A
H
STATIC DIMENSIONS – High Lift Arm
ft-in (mm)
ft-in (mm)
A Overall Length with Standard Bucket
19-7 (5978)
A Overall Length with Standard Bucket
20-0 (6090)
B Axle to Pivot Pin
3-10 (1166)
B Axle to Pivot Pin
4-2 (1278)
C Wheel Base
8-10 (2700)
C Wheel Base
8-10 (2700)
D Axle to Counterweight Face
4-6 (1375)
D Axle to Counterweight Face
4-6 (1375)
E Minimum Ground Clearance
1-4 (410)
E Minimum Ground Clearance
1-4 (410)
F Height Over Exhaust
9-7 (2928)
F Height Over Exhaust
9-7 (2928)
G Width Over Cab
5-0 (1515)
G Width Over Cab
5-0 (1515)
H Width Over Tires
7-3 (2203)
H Width Over Tires
7-3 (2203)
H1 Wheel Track
5-11 (1800)
H1 Wheel Track
5-11 (1800)
J Height Over Cab
10-1 (3078)
J Height Over Cab
10-1 (3078)
Pin Height (maximum)
11-5 (3487)
Pin Height (maximum)
11-11 (3621)
Overall Operating Height
14-6 (4427)
Overall Operating Height
14-11 (4559)
Front Axle Weight
lb (kg)
7936 (3600)
Front Axle Weight
lb (kg)
8271 (3752)
Rear Axle Weight
lb (kg)
9950 (4513)
Rear Axle Weight
lb (kg)
8027 (3641)
Total Weight
lb (kg)
18,636 (8453)
Total Weight
lb (kg)
19,341 (8773)
Inside Radius
8-7 (2608)
Inside Radius
8-7 (2608)
Maximum Radius
17-9 (5414)
Maximum Radius
17-11 (5465)
Articulation Angle
± 40°
Articulation Angle
degrees
Data based on machine equipped with a 1.6 yd3, direct mounted bucket with bolt on toeplates and Michelin 15.5R25 XHA (L3) tires
degrees
± 40°
Data based on machine equipped with a 1.6 yd3, direct mounted bucket with bolt on toeplates and Michelin 5.5R25 XHA (L3) tires
JCB WHEEL LOADER | 411 HT
LOADER DIMENSIONS – Standard Height Arm
CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS
Tipping Loads
Tire size N
M
T
Q
Manufacturer
Type
Dimensions
Op Weight
Straight
Full Turn
Vertical
Width
lb (kg)
lb (kg)
lb (kg)
in (mm)
in (mm) +0.276 (+7)
Rating
15.5 - 25 (crossply)
Goodyear
SGL D/L 12 Ply
L2
-347 (-158)
-207 (-94)
-202 (-92)
-0.157 (-4)
15.5 - 25 (crossply)
Goodyear
HRL D/L 12 Ply
L3
-273 (-124)
-163 (-74)
-158 (-72)
0
0
15.5 R 25 (radial)
Goodyear
GP - 2B
L2
0
0
0
-0.157 (-4)
+0.276 (+7)
15.5 R 25 (radial)
Michelin
XTLA
L2
-106 (-48)
-64 (-29)
-62 (-28)
-0.157 (-4)
+0.276 (+7)
15.5 R 25 (radial)
Michelin
XMINED2
L5
+961 (+436) +580 (+263) +560 (+254) +1.654 (+42) +0.118 (+3)
R S
O
P
Assumes the machine is fitted with Michelin 15.5R25 XHA (L3) tires.
Bucket Mounting
Bucket Type General Purpose General Purpose General Purpose General Purpose Light Material General Purpose General Purpose General Purpose General Purpose Light Material
Bucket Equipment
Bucket Capacity (SAE heaped)
yd3 (m3)
1.6 (1.2)
1.8 (1.4)
1.6 (1.2)
1.8 (1.4)
2.2 (1.7)
1.6 (1.2)
1.8 (1.4)
1.6 (1.2)
1.8 (1.4)
2.2 (1.7)
Bucket Capacity (struck)
yd3 (m3)
1.319 (1.009)
1.542 (1.180)
1.319 (1.009)
1.542 (1.180)
1.780 (1.362)
1.319 (1.009)
1.542 (1.180)
1.319 (1.009)
1.542 (1.180)
1.780 (1.362)
Bucket Width
ft-in (mm)
7-5 (2250)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-10 (2400)
Bucket Weight
lb (kg)
1106 (502)
1280 (581)
1164 (528)
1329 (603)
1406 (638)
1056 (479)
1230 (558)
1113 (505)
1278 (580)
1353 (614)
Maximum Material Density
lb/yd3 (kg/m3)
3651 (2208)
3148 (1835)
3651 (2208)
3148 (1835)
2552 (1592)
3476 (2102)
2997 (1748)
3476 (2102)
2997 (1748)
2469 (1515)
Tipping Load Straight
lb (kg)
13,574 (6157) 13,205 (5990) 13,574 (6157) 13,205 (5990) 13,104 (5944) 12,982 (5889) 12,633 (5730) 12,982 (5889) 12,633 (5730) 12,532 (5685)
Tipping Load Full Turn
lb (kg)
11,685 (5300) 11,334 (5141) 11,685 (5300) 11,334 (5141) 11,232 (5095) 11,126 (5047) 10,790 (4894) 11,126 (5047) 10,790 (4894) 10,689 (4848)
Payload
lb (kg)
5843 (2650)
5667 (2570)
5843 (2650)
5667 (2570)
5616 (2547)
5563 (2523)
5395 (2447)
5563 (2523)
5395 (2447)
5433 (2424)
Maximum Break Out Force
lbf (kN)
16,455 (73.2)
15,219 (67.7)
16,455 (73.2)
15,219 (67.7)
14,095 (62.7)
15,106 (67.2)
14,005 (62.3)
15,106 (67.2)
14,005 (62.3)
12,836 (57.1)
M
Dump Angle Maximum
degrees
50°
50°
50°
50°
50°
50°
50°
50°
50°
50°
N
Roll Back Angle at Full Height
degrees
43°
43°
43°
43°
43°
43°
43°
43°
43°
43°
O
Roll Back at Carry
degrees
47°
47°
47°
47°
47°
47°
47°
47°
47°
47°
P
Roll Back at Ground Level
degrees
41°
41°
41°
41°
41°
41°
41°
41°
41°
41°
Direct Tipped Teeth
Direct
Direct
Direct
Direct
Quickhitch
Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate Tipped Teeth
Quickhitch
Quickhitch
Quickhitch
Quickhitch
Tipped Teeth Reversible T/plate Reversible T/plate Reversible T/plate
Q
Load Over Height
ft-in (mm)
10-7 (3242)
10-7 (3242)
10-8 (3237)
10-8 (3237)
10-8 (3237)
10-8 (3259)
10-8 (3259)
10-8 (3254)
10-8 (3254)
10-8 (3254)
R
Dump Height (45° dump)
ft-in (mm)
8-3 (2524)
8-0 (2450)
8-7 (2624)
8-6 (2582)
8-4 (2532)
8-2 (2490)
8-0 (2426)
8-6 (2590)
8-4 (2548)
8-2 (2498)
S
Dig Depth
ft-in (mm)
0-4 (108)
0-4 (113)
0-4 (100)
0-4 (105)
0-4 (105)
0-4 (91)
0-4 (96)
0-3 (83)
0-3 (88)
0-3 (88)
T
Reach at Dump Height
ft-in (mm)
3-5 (1035)
3-6 (1061)
3-0 (925)
3-1 (951)
3-3 (996)
3-7 (1084)
3-8 (1124)
3-2 (974)
3-4 (1014)
3-6 (1059)
Reach Maximum (45° dump)
ft-in (mm)
4-11 (1505)
5-2 (1569)
4-7 (1395)
4-9 (1459)
5-0 (1529)
4-5 (1488)
4-10 (1475)
4-5 (1358)
4-6 (1365)
4-8 (1435)
Operating Weight (includes 176 lb/80 kg operator and full fuel tank) lb (kg)
18,578 (8427) 18,752 (8506) 18,636 (8453) 18,801 (8528) 18,878 (8563) 18,958 (8599) 19,132 (8678) 19,015 (8625) 19,180 (8700) 19,255 (8734)
JCB WHEEL LOADER | 411 HT
LOADER DIMENSIONS – High Lift Arm
CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS HIGH LIFT ARM
Tipping loads
Tire size N
M
T
Q
Manufacturer
Type
Dimensions
Op Weight
Straight
Full Turn
Vertical
Width
Rating
lb (kg)
lb (kg)
lb (kg)
in (mm)
in (mm) +0.276 (+7)
15.5 - 25 (crossply)
Goodyear
SGL D/L 12 Ply
L2
-347 (-158)
-194 (-88)
-192 (-87)
-0.157 (-4)
17.5 R 25 (radial)
Goodyear
HRL D/L 12 Ply
L3
-273 (124)
-154 (-70)
-150 (-68)
0
0
17.5 R 25 (radial)
Goodyear
GP - 2B
L2
0
0
0
-0.157 (-4)
+0.276 (+7)
17.5 R 25 (radial)
Michelin
XTLA
L2
-106 (-48)
-60 (-27)
-57 (-26)
-0.157 (-4)
+0.276 (+7)
17.5 R 25 (radial)
Michelin
XMINED2
L5 +961 (+436) +580 (+263) +560 (+254) +1.654 (+42) +0.118 (+3)
R S
O
P
Assumes the machine is fitted with Michelin 15.5R25 XHA (L3) tires.
Bucket Mounting
Bucket Type General Purpose General Purpose General Purpose General Purpose Light Material General Purpose General Purpose General Purpose General Purpose Light Material
Bucket Equipment
Tipped Teeth
Tipped Teeth
Tipped Teeth
Tipped Teeth
Bucket Capacity (SAE heaped)
yd3 (m3)
1.6 (1.2)
1.8 (1.4)
1.6 (1.2)
1.8 (1.4)
2.2 (1.7)
1.6 (1.2)
1.8 (1.4)
1.6 (1.2)
1.8 (1.4)
2.2 (1.7)
Bucket Capacity (struck)
yd3 (m3)
1.319 (1.009)
1.542 (1.180)
1.319 (1.009)
1.542 (1.180)
1.780 (1.362)
1.319 (1.009)
1.542 (1.180)
1.319 (1.009)
1.542 (1.180)
1.780 (1.362)
Bucket Width
ft-in (mm)
7-5 (2250)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-5 (2250)
7-10 (2400)
7-10 (2400)
Bucket Weight
lb (kg)
1106 (502)
1280 (581)
1164 (528)
1329 (603)
1406 (638)
1056 (479)
1230 (558)
1113 (505)
1278 (580)
1353 (614)
Maximum Material Density
lb/yd3 (kg/m3)
3456 (2090)
2979 (1738)
3456 (2090)
2979 (1738)
2415 (1418)
3291 (1990)
2837 (1654)
3291 (1990)
2837 (1654)
2299 (1349)
Tipping Load Straight
lb (kg)
12,853 (5830) 12,504 (5672) 12,853 (5830) 12,504 (5672) 12,408 (5628) 12,295 (5577) 11,963 (5426) 12,295 (5577) 11,963 (5426) 11,867 (5383)
Tipping Load Full Turn
lb (kg)
11,061 (5017) 10,727 (4866) 11,061 (5017) 10,727 (4866) 10,631 (4822) 10,532 (4777) 10,213 (4633) 10,532 (4777) 10,213 (4633) 10,117 (4589)
Payload
lb (kg)
5530 (2508)
5363 (2433)
5530 (2508)
5363 (2433)
5315 (2411)
5266 (2389)
5107 (2316)
5266 (2389)
5107 (2316)
5059 (2295)
Maximum Break Out Force
lbf (kN)
16,455 (73.2)
15,219 (67.7)
16,455 (73.2)
15,219 (67.7)
14,095 (62.7)
15,106 (67.2)
14,005 (62.3)
15,106 (67.2)
14,005 (62.3)
12,836 (57.1)
M
Dump Angle Maximum
degrees
47.5°
47.5°
47.5°
47.5°
47.5°
47.5°
47.5°
47.5°
47.5°
47.5°
N
Roll Back Angle at Full Height
degrees
44°
44°
44°
44°
44°
44°
44°
44°
44°
44°
O
Roll Back at Carry
degrees
48.5°
48.5°
48.5°
48.5°
48.5°
48.5°
48.5°
48.5°
48.5°
48.5°
P
Roll Back at Ground Level
43.5°
43.5°
43.5°
43.5°
43.5°
43.5°
43.5°
43.5°
43.5°
43.5°
Q
Load Over Height
ft-in (mm)
11-1 (3371)
11-1 (3376)
11-1 (3371)
11-1 (3371)
11-1 (3371)
11-2 (3393)
11-2 (3393)
11-1 (3388)
11-1 (3388)
11-1 (3388)
R
Dump Height (45° dump)
ft-in (mm)
8-9 (2658)
8-6 (2594)
9-1 (2758)
8-11 (2716)
8-9 (2666)
8-7 (2624)
8-5 (2560)
8-11 (2724)
8-10 (2682)
8-8 (2632)
S
Dig Depth
ft-in (mm)
0-4 (111)
0-5 (116)
0-4 (103)
0-4 (108)
0-4 (108)
0-4 (94)
0-4 (99)
0-3 (86)
0-4 (91)
0-4 (91)
T
Reach at Dump Height
ft-in (mm)
3-6 (1069)
3-7 (195)
3-2 (959)
3-3 (985)
3-5 (1030)
3-8 (1118)
3-10 (1158)
3-3 (1008)
3-5 (1048)
3-7 (1093)
Reach Maximum (45° dump)
ft-in (mm)
5-11 (1810)
6-2 (1874)
5-7 (1700)
5-9 (1764)
6-0 (1834)
5-11 (1793)
5-10 (1780)
5-5 (1663)
5-7 (1670)
5-9 (1740)
degrees
Operating Weight (includes 176 lb/80 kg operator and full fuel tank) lb (kg)
Direct
Direct
Direct
Direct
Direct
Reversible T/plate Reversible T/plate Reversible T/plate
Quickhitch
Quickhitch
Quickhitch
Quickhitch
Quickhitch
Reversible T/plate Reversible T/plate Reversible T/plate
19,196 (8707) 19,370 (8786) 19,253 (8733) 19,418 (8808) 19,495 (8843) 19,575 (8879) 19,749 (8958) 19,632 (8905 ) 19,797 (8980) 19,872 (9014)
JCB WHEEL LOADER | 411 HT LOADER
AXLES
Widely spaced four ram parallel geometry provides the combination of excellent visibility with high bucket torque characteristics throughout the working arc. Specification includes automatic bucket reset and lift arm kickout mechanisms. The pin, bush and sealing design on all pivot points provide extended maintenance intervals. Optional smooth ride system (SRS) reduces machine bounce on load/carry operations. Optional High Lift Loader specifically designed for optimum load over height.
Type
Epicyclic Hub Reduction
Make & Model
JCB PD70 Front & Rear
Overall Axle Ratio
18.16 : 1
Rear Axle Oscillation
12.5°
STEERING
ENGINE 4-cylinder wastegated turbo-charged, liquid cooled, direct injection diesel. Independent water pump and fan drives ensure maximum cooling efficiency and “clean-burn” combustion chamber provides minimum fuel consumption. A remote sump oil drain facility simplifies servicing. Type
Diesel 4 Stroke
Make
JCB Dieselmax Tier III
Capacity
in3 (l)
269 (4.4)
Bore
in (mm)
4.06 (103)
Stroke
in (mm)
Aspiration Cylinders Max Gross Power to SAE J1995/ISO 14396 Net Power to SAE J1349/EEC 80/1269 Max Torque
5.2 (132)
Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer valve @ 2,538 lb/in2 (175 bar) to provide smooth low effort response. Steering angle ± 40°. Steer rams located high in the chassis fabrication to provide protection from damage. Adjustable steering column.
BRAKES Hydraulic power assisted braking on all wheels. Dual circuit with accumulator back-up provide maximum safety under all conditions. Organic brake linings are environmentally acceptable. Parking brake, mechanical disc type operating on transmission output shaft.
Turbocharged 4
hp (kW) @ 2200 rpm
100 (74.2)
hp (kW) @ 2200 rpm
92.8 (69.2)
lbf.ft (Nm) @ 1400 rpm
325 (440)
TIRES A variety of tire options are available including: 15.5 x 25 x 12 ply (L2). 15.5 x 25 x 12 ply (L3). 15.5R25 XTLA (L2). 15.5R25 GP2B (L2). 15.5R25 XHA (L2).
Emissions:Complies with EPA Tier III – EU Stage 3A engine emission legislation.
LOADER HYDRAULICS Double gear pump with automatic unloader giving combination of speed and power on demand making efficient and economic use of available engine power. Main services are servo actuated from a single lever loader control. Accumulator back-up is available to control loader in the event of loss of pump pressure. Pump Type
TRANSMISSION
Pump 1 Max Flow
4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter 4 forward and 3 reverse gears. Type
Smooth Shift Powershift
Make & Model
ZF 4WG115
Torque Converter Stall Ratio
3.057 : 1
1st Gear
mph (km/h)
3.33 (5.36)
2nd Gear
mph (km/h)
7.75 (12.47)
3rd Gear
mph (km/h)
17.09 (27.5)
4th Gear (forward only)
mph (km/h)
23.30 (37.5)
Pump 1 Max Pressure Pump 2 Max Flow
Double Gear Pump
gal/min (l/min)
13.3 (50.6)
lb/in2 (bar)
3190 (220)
gal/min (l/min)
19.1 (72.6)
lb/in2 (bar)
2465 (170)
Hydraulic Cycle Times at Full Engine Revs
Seconds
Arms Raise (full bucket)
5.0
Bucket Dump (full bucket)
1.1
Arms Lower (empty bucket)
3.7
Total Cycle
9.8
Pump 2 Max Pressure
Ram Dimensions
Bore
Rod
Closed Centers
Stroke
Bucket Ram x2
in (mm)
3.1 (80)
2 (50)
59.1 (1502)
36.5 (928)
Lift Ram x2
in (mm)
3.5 (90)
2 (50)
43.6 (1107)
29.3 (743)
Steer Ram x2
in (mm)
2.4 (60)
1.2 (30)
24.4 (621)
12.3 (312)
JCB WHEEL LOADER | 411 HT
ELECTRICAL SYSTEM
STANDARD EQUIPMENT
24 V negative ground system, 55 Amp alternator with 2 x 126 Amp hour low maintenance batteries. Isolator located in rear of machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen, twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning light monitoring. Connectors to IP67 standard. System Voltage
V
24
Alternator Output
Ah
55
Battery Capacity
Ah
2 x 110
Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever servo control, high torque true parallel lift geometry combines with excellent visibilty between the arms. Engine: Air cleaner – 3 stage dry type – cyclonic with primary and safety elements, auto tensioner, cold start advance, fuel filters, fan guards. Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator switch, direction changes and kickdown on gear selector and loader control lever, air blast transmission cooler. Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear. Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power assisted. Parking disc brake on transmission output shaft.
CAB
Hydraulics: Double gear pump with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support, 3rd spool auxiliary hydraulic circuit as standard. Hydraulic tank located in the rear chassis fabrication. Air blast cooler.
Resiliently mounted ROPS/FOPS structure (tested in accordance with ISO 3471-1 : 1986 / ISO 3449 : 1984). Deluxe operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/exit is via large rear hinged door and anti-slip steps. Excellent forward visibility is provided by a 3 section curved, laminated windscreen and low waistline. Extensive instrumentation includes electronic monitoring panel and display (EMS). Heating / ventilation provides balanced and filtered air distribution throughout the cab via a powerful 11 kW capacity heater. The unitary construction allows easy sealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent engagement and the loader controls can be isolated for safe road travel.
Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock. Cab: ROPS/FOPS safety structure, cigar lighter, ashtray, interior reading light, center mounted master warning light. Electronic monitoring panel with LCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear windscreen wipe/wash and self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun blind, internal rear view mirror, heated external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windscreen, loader control isolator, horn. Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery isolator, radio wiring and speakers, 55 amp alternator, rotating beacon. Bodywork: Front fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch, lifting lugs.
ATTACHMENTS An extensive range of attachments including pallet forks, crane jibs, high dumping buckets and timber grapples are available to fit directly or via the JCB quickhitch mounting.
SERVICE FILL CAPACITIES
gal (l)
Hydraulic System
29 (110)
Fuel Tank
33 (125)
Engine Oil Sump
2.8 (10.7)
Transmission Oil System
7.1 (27)
Axle Oil (front)
6.6 (25)
Axle Oil (rear)
6.6 (25)
Engine Coolant System
5.7 (21.5)
OPTIONAL EQUIPMENT Auxiliary 4th spool hydraulic service, air conditioning, limited slip differentials front/rear axles, additional counterweight, oil bath air cleaner, turbo 2 pre-cleaner, visibowl pre-cleaner, tooth guard, replaceable bucket wearparts, sealed alternator, epoxy coated radiator/coolers, smooth ride system (SRS), hydraulic quickhitch, rear fenders, high lift arms, reversing camera (color), auto greasing system, auxiliary control buttons on joystick, spark arrestor, 24 V to 12 V in cab converter, cab screen guards, additional front and rear cab mounted work lights, air suspension seat, front chassis apron mat, sun visor.
JCB WHEEL LOADER | 411 HT
LOADER DIMENSIONS - FORK FRAME WITH FORKS Parallel Fork
Roll Back Fork
Assumes Michelin 15.5R25 XHA L3 Tires Fork Carriage Width
ft-in (mm)
4-11 (1500)
4-11 (1500)
Length of Tines
ft-in (mm)
4-0 (1220)
4-0 (1220)
A
Reach at Ground Level
ft-in (mm)
2-2 (662)
2-2 (669)
B
Reach at Arms Horizontal
ft-in (mm)
4-8 (1425)
4-8 (1432)
C
Below Ground Level
ft-in (mm)
0-1 (17)
0-1 (27)
D
Arms, Horizontal Height
ft-in (mm)
5-8 (1728)
5-8 (1718)
E
Arms, Maximum Height
ft-in (mm)
10-11 (3320)
10-10 (3310)
F
Reach at Maximum Height
ft-in (mm)
2-8 (813)
2-8 (820)
Payload**
lb (kg)
6322 (2868)
6322 (2868)
Tipping Load Straight
lb (kg)
9533 (4324)
9533 (4324)
Tipping Load Full Turn (40째)
lb (kg)
8175 (3708)
8175 (3708)
Attachment Weight
lb (kg)
970 (440)
970 (440)
F
E D
A
**At the center-of-gravity distance 1 ft 8 in (500 mm). Based on 80% of full turn tipping load as defined by ISO 8313. Manual fork spacings at 50 mm increments. Fork section 4 in x 2 in (100 mm x 50 mm).
C B
HIGH LIFT LOADER DIMENSIONS - FORK FRAME WITH FORKS F
Assumes Michelin 15.5R25 XHA L3 Tires
E D
A
C B
Parallel Fork
Roll Back Fork
Fork Carriage Width
ft-in (mm)
4-11 (1500)
4-11 (1500)
Length of Tines
ft-in (mm)
4-0 (1220)
4-0 (1220)
A
Reach at Ground Level
ft-in (mm)
2-8 (801)
2-8 (808)
B
Reach at Arms Horizontal
ft-in (mm)
5-0 (1521)
5-0 (1528)
C
Below Ground Level
ft-in (mm)
0-1 (17)
0-1 (27)
D
Arms, Horizontal Height
ft-in (mm)
5-8 (1728)
5-8 (1718)
E
Arms, Maximum Height
ft-in (mm)
11-4 (3459)
11-4 (3449)
F
Reach at Maximum Height
ft-in (mm)
2-8 (815)
2-8 (822)
Payload**
lb (kg)
6190 (2808)
6190 (2808)
Tipping Load Straight
lb (kg)
9027 (4095)
9027 (4095)
Tipping Load Full Turn (40째)
lb (kg)
7738 (3510)
7738 (3510)
Attachment Weight
lb (kg)
970 (440)
970 (440)
**At the center-of-gravity distance 1 ft 8 in (500 mm). Based on 80% of full turn tipping load as defined by ISO 8313. Manual fork spacings at 50 mm increments. Fork section 4 in x 2 in (100 mm x 50 mm).
JCB WHEEL LOADER | 411 HT
BUCKET SELECTOR
STANDARD ARM
Bucket Capacity yd3 (m3)
2.2 (1.7) 100%
1.8 (1.4)
115%
95%
Bucket Fill Factors
1.5 (1.2)
1,350 (800)
1,680 (1000)
2,020 (1200)
2,360 (1400)
2,700 (1600)
3,030 (1800)
3,370 (2000)
3,700 (2200)
4,040 (2400)
4,380 (2600)
Material Density lb/yd3 (kg/m3)
BUCKET SELECTOR Material
Loose Density
Fill Factor
Loose Density
Fill Factor
lb/yd3
kg/m3
%
Material
lb/yd3
kg/m3
%
Snow (fresh)
337
200
110
Sodium Chloride (dry) (salt)
2192
1300
85
Peat (dry)
674
400
100
Cement Portland
2428
1440
100
Sugar Beet
894
530
100
Limestone (crushed)
2580
1530
100
Coke (loose)
961
570
85
Sand (dry)
2613
1550
100
Barley
1012
600
85
Asphalt
2698
1600
100
Petroleum Coke
1146
680
85
Gravel (dry)
2782
1650
85
Wheat
1231
730
85
Clay (wet)
2832
1680
110
Coal Bitumous
1290
765
100
Sand (wet)
3187
1890
110
Fertilizer (mixed)
1737
1030
85
Fire Clay
3507
2080
100
Coal Anthracite
1764
1046
100
Copper (concentrate)
3878
2300
85
Earth (dry) (loose)
1939
1150
100
Slate
4721
2800
100
Nitrate Fertilizer
2180
1250
85
Magnetite
5402
3204
100
JCB WHEEL LOADER | 411 HT
A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man business into one of the world’s largest manufacturers of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with an extensive dealer sales and service network in over 150 countries, we aim to deliver the best customer support in the industry. Through setting the standards by which others are judged, JCB has become one of the world’s most impressive success stories.
JCB Headquarters Savannah, 2000 Bamford Blvd, Savannah, GA 31322 Tel: (912) 447-2000 Fax: (912) 447-2299 www.jcb.com JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. DWUSA 2979 12/11